Related configure options (--enable-pae, --enable-mtrr, --enable-global-pages, --enable-large-pages) are deprecated.
Less configure options - less configure problems :)
Starting convergence to new lazy flags scheme by Darek Mihocka (www.emulators.com). The new flags code is still being validated and perfected but I try to minimize the diff between 2 versionS
[ bochs-Bugs-1562172 ] TLB_init() fails to initialize priv_check array if USE_TLB 0
2. Paging is always exists for i386+
To disable paging it is better to use normal model without special code, only by setting cr0.pg=0
- Fixed critical bug in CPU code added with one of the prev commits
- Disasm support for SSE4
- Rename PNI->SSE3 everywhere in the code
- Correctly decode, disassemble and execute 'XCHG R8, rAX' x86-64 instruction
- Correctly decode, disassemble and execute multi-byte NOP 0F F1 opcode
- Fixed ENTER and LEAVE instructions in x86-64 mode
- Added ability to turn ON instruction trace, only GUI support is missed.
Instruction trace could be enabled if Bochs was compiled with disasm
- More changes Bit32u -> bx_phy_address
- Complete preliminary implementation of SMM in Bochs, SMI is still PANICs but if you press 'continue' everything should work OK
- Small code cleanup
- Update CHANGES and user docs
Averything that required cpu.h include now has it explicitly and there are a lot of files not dependant by CPU at all which will compile a lot faster now ...
Change BxSupportPAE and BxSupportGlobalPages macros to Bochs style names
Set bx_cpu_id in BX_CPU_C constructor (safe way)
Backup cpu-level check for paging features at compile time (already checked in configure)
Some warnings and indent fixes
speed up get_segment_base method for x86-64 case
- it works only on x86 with gcc2.95+
- uses the GCC function atribute "regparm(n)" to declare that certain
functions use the register calling convention
- performance improvement is about 6%
1) fixed the type of "hostPageAddr" and associated typecasts.
2) fixed the type of "pages" and associated typecasts (overloaded variable)
3) patch to cpu.cc to calculate "eipPageBias" correctly in 64 bit mode
* renamed CPU_ID to BX_CPU_ID.
with this new name there is no possibility for name contentions and BX_CPU_ID
definition could be moved out to NEED_CPU_REG_SHORTCUTS block
* returned back `unsigned BX_CPU::which_cpu(void)` function
* added BX_CPU_ID parameter for
BX_INSTR_PHY_READ(a20addr, len);
BX_INSTR_PHY_WRITE(a20addr, len);
now it will be
BX_INSTR_PHY_READ(cpu_id, a20addr, len);
BX_INSTR_PHY_WRITE(cpu_id, a20addr, len);
- Now compiles for plain ia-32
- Fixed some printf formatting for ia32 only.
- Update to latest Win32 DLL
- Added an ICEBP (Undoc 0xF8, INT 01) facility.
- updated to use latest VGA refresh routine
"bx_bool" which is always defined as Bit32u on all platforms. In Carbon
specific code, Boolean is still used because the Carbon header files
define it to unsigned char.
- this fixes bug [ 623152 ] MacOSX: Triple Exception Booting win95.
The bug was that some code in Bochs depends on Boolean to be a
32 bit value. (This should be fixed, but I don't know all the places
where it needs to be fixed yet.) Because Carbon defined Boolean as
an unsigned char, Bochs just followed along and used the unsigned char
definition to avoid compile problems. This exposed the dependency
on 32 bit Boolean on MacOS X only and led to major simulation problems,
that could only be reproduced and debugged on that platform.
- On the mailing list we debated whether to make all Booleans into "bool" or
our own type. I chose bx_bool for several reasons.
1. Unlike C++'s bool, we can guarantee that bx_bool is the same size on all
platforms, which makes it much less likely to have more platform-specific
simulation differences in the future. (I spent hours on a borrowed
MacOSX machine chasing bug 618388 before discovering that different sized
Booleans were the problem, and I don't want to repeat that.)
2. We still have at least one dependency on 32 bit Booleans which must be
fixed some time, but I don't want to risk introducing new bugs into the
simulation just before the 2.0 release.
Modified Files:
bochs.h config.h.in gdbstub.cc logio.cc main.cc pc_system.cc
pc_system.h plugin.cc plugin.h bios/rombios.c cpu/apic.cc
cpu/arith16.cc cpu/arith32.cc cpu/arith64.cc cpu/arith8.cc
cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer16.cc cpu/ctrl_xfer32.cc
cpu/ctrl_xfer64.cc cpu/data_xfer16.cc cpu/data_xfer32.cc
cpu/data_xfer64.cc cpu/debugstuff.cc cpu/exception.cc
cpu/fetchdecode.cc cpu/flag_ctrl_pro.cc cpu/init.cc
cpu/io_pro.cc cpu/lazy_flags.cc cpu/lazy_flags.h cpu/mult16.cc
cpu/mult32.cc cpu/mult64.cc cpu/mult8.cc cpu/paging.cc
cpu/proc_ctrl.cc cpu/segment_ctrl_pro.cc cpu/stack_pro.cc
cpu/tasking.cc debug/dbg_main.cc debug/debug.h debug/sim2.cc
disasm/dis_decode.cc disasm/disasm.h doc/docbook/Makefile
docs-html/cosimulation.html fpu/wmFPUemu_glue.cc
gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/gui.cc gui/gui.h
gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc
gui/rfb.cc gui/sdl.cc gui/siminterface.cc gui/siminterface.h
gui/term.cc gui/win32.cc gui/wx.cc gui/wxmain.cc gui/wxmain.h
gui/x.cc instrument/example0/instrument.cc
instrument/example0/instrument.h
instrument/example1/instrument.cc
instrument/example1/instrument.h
instrument/stubs/instrument.cc instrument/stubs/instrument.h
iodev/cdrom.cc iodev/cdrom.h iodev/cdrom_osx.cc iodev/cmos.cc
iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_arpback.cc
iodev/eth_packetmaker.cc iodev/eth_packetmaker.h
iodev/floppy.cc iodev/floppy.h iodev/guest2host.h
iodev/harddrv.cc iodev/harddrv.h iodev/ioapic.cc
iodev/ioapic.h iodev/iodebug.cc iodev/iodev.h
iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.h
iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pic.h
iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h
iodev/sb16.cc iodev/sb16.h iodev/serial.cc iodev/serial.h
iodev/vga.cc iodev/vga.h memory/memory.h memory/misc_mem.cc
This is an interim update to allow others to test.
We have userland code running!!! (up to a point)
Able to start executing "sash" as /sbin/init in userland from linux 64 bit
kernel until it crashes trying to access a null pointer. No kernel panics
though, just a segfault loop.
Some things changed in the ctrl_xfer*.cc, fetchdecode*.cc,
and cpu.cc since the original patches, so I did some patch
integration by hand. Check the placement of the
macros BX_INSTR_FETCH_DECODE_COMPLETED() and BX_INSTR_OPCODE()
in cpu.cc to make sure I go them right. Also, I changed the
parameters to BX_INSTR_OPCODE() to update them to the new code.
I put some comments before each of these to help determine if
the placement is right.
These macros are only compiled in if you are gathering instrumentation
data from bochs, so they shouldn't effect others.
in cpu.cc out of the main loop, and into the asynchronous
events handling. I went through all the code paths, and
there doesn't seem to be any reason for that code to be
in the hot loop.
Added another accessor for getting instruction data, called
modC0(). A lot of instructions test whether the mod field
of mod-nnn-rm is 0xc0 or not, ie., it's a register operation
and not memory. So I flag this in fetchdecode{,64}.cc.
This added on the order of 1% performance improvement for
a Win95 boot.
Macroized a few leftover calls to Write_RMV_virtual_xyz()
that didn't get modified in the x86-64 merge. Really, they
just call the real function for now, but I want to have them
available to do direct writes with the guest2host TLB pointers.
but if you hand edit cpu/cpu.h, and change BxICacheEntries,
you can try different sizes. I'll make this more flexible
with configure. For now, use "--enable-icache" with no parameters.
- Modified fetchdecode.cc/fetchdecode64.cc just enough so that
instructions which encode a direct address now use a memory
resolution function which just sticks the immediate address
into rm_addr. With cached instructions we need this.
with accessors. Had to touch a number of files to update the
access using the new accessors.
Moved rm_addr to the CPU structure, to slim down bxInstruction_c
and to prevent future instruction caching from getting sprayed
with writes to individual rm_addr fields. There only needs to
be one. Though need to deal with instructions which have
static non-modrm addresses, but which are using rm_addr since
that will change.
bxInstruction_c is down to about 40 bytes now. Trying to
get down to 24 bytes.
use accessors. This lets me work on compressing the
size of fetch-decode structure (now called bxInstruction_c).
I've reduced it down to about 76 bytes. We should be able
to do much better soon. I needed the abstraction of the
accessors, so I have a lot of freedom to re-arrange things
without making massive future changes.
Lost a few percent of performance in these mods, but my
main focus was to get the abstraction.
enhancement to bochs. You can now configure with
--enable-guest2host-tlb.
Force the support of big pages (PSE) when x86-64 is configured.
Reverted back to only one kind of TLB entry style, since everything
is ported.
Fixed one bug in io.cc with as_64 and the index registers.
There are others, as noticed by Peter.
You need to use '--enable-global-pages' to configure in support.
If you have something to boot that uses them, give them a
spin. Really the were introduced for PPro and above, but
I haven't put in any limits. CPUID and CR4 report the proper
bits when configured, regardless of --enable-cpu-level at the
moment.
with GCC) align them with the GCC special alignment attribute.
Since there was then one available field, I split the protection
attributes and native host pointers into their own fields.
Before, with 3 dwords per TLB entry, some entries (about 3/8)
were spanning two processor cache lines (assuming a 32-byte
cache line). Now, they all fit within one cache line.
Knocked about 1.4% off Win95 boot time, probably more off normal
software runs.
it can decide how to proceed. Some of those bits are necessary
to make TLB invalidation decisions. INVLPG doesn't cause
a whole TLB flush anymore, just one page. Some of the
current CPU behaviours model the P6, especially on CR0
reloads. Earlier processors kept some pre-change pre-fetched
instructions until a branch. We could probably model that
by setting a flag, and letting the revalidate_prefetch_q
function cause serialization.
The TLB flush code only invalidates entries which are not
already invalidated for the case where the TLB invalidation
ID trick is not in use.
Kevin Lawton says he doesn't get a performance benefit.
I'm not sure if I do. Either way, the difference isn't
very large.
This code may get removed if it turns out to be useless.
direct reads/writes from native variables to the x86 (guest)
memory image. Look at the end of bochs.h. Don't know if that's
the right place to put them, but here you can extend these
macros to platform-specific asm() code if you like, or just
use the generic C code I supplied. Some platforms have special
instructions for byte-order swapping etc. Also, you can't
make any assumptions about the alignment of the pointers
passed.
