* Detect PCH model based on ISA bridge and save
into shared info for later use.
* On CougarPoint PCH systems, assign pipes via
special CPT registers
* Drop HasPlatformControlHub as PCH should be
based on more than just generation.
* Move current_mode into the accelerant as the
driver doesn't care.
* Record panel_mode in driver and present to accelerant
* eDP, if no EDID and mobile, leave edid incomplete.
Mode set should notice that and fall back to panel_mode
* DisplayPort != DigitalPort
* i2c needs wrapped in DP AUX transaction code
* Mode-setting comes with DP link training as well
* We need to try and share DP code with radeon_hd
* polarity regs move on LVDS vs analog
* add knowledge or transcoder registers, they
exist seperately on PCH-split
* Native resolutions now work on LVDS under i965
* IvyBridge or higher can auto-train.
* Linux doesn't use this feature, however
manual FDI link training is *really*
complex... lets try auto-training first.
* I really hope we can kill head_mode some day
* Break pll code out from mode code
* The LVDS and Digital are smooshed together and
likely need broken apart.
* No impact to non-ValleyView chipsets
* Bump some register locations for VLV
* Only have HDMI port to test with on my ValleyView GPU
and our driver seems to be missing all HDMI and
sideband functionality.
* As ValleyView chipsets seem to be UEFI only, we don't
have VESA fallback, so this shouldn't cause regressions.
(unless we get UEFI framebuffer support)
Intel changed the PCH interrupt bits between Sandy Bridge and Ivy Bridge
to make space for the 3rd display pipe. Take this into account and check
for the correct bits on the newer devices.
Fixes#11522.
* These aren't tested, but since we go off of DCE
versions for a lot of stuff, they may work.
* AMD doens't include market names in their drivers
anymore, so if we want to label them it will take
additional work.
* This is less pretty, but we need access to the connector
to find the HPD gpio pin mask on the card.
* dp_aux communications seem to work again.
* If you have a DisplayPort item attached to your card you
may want to just unplug it at this point. We attempt DP
link training and it fails. This failure will also cause
other monitors to not function as app_server still isn't
multi-head aware (#10486)
https://github.com/druga/haiku-stuff/tree/master/intel_extreme
Rebased against current sources.
* The BIOS video mode sometimes reports a scaled mode instead of the
physical panel dimensions. Get the data from the VBT table as well, and
use it if the reported resolution is bigger.
* On first boot, force the panel native mode so the user doesn't have to
set it manually.
* Only allow a single head at a time on i855gm, as the card can't drive
both heads at the same time.
* Detect when a new requested mode is the same as the current one, and
skip modesetting in that case. Avoids screen flickering when changing
workspaces.
* Fix some cases of misdetecting which pipes to enable
* They are all over the place.. I give up
* Going off of engineering names and DCE is more accurate
* A lot of this info came from the x.org wiki
* I'd like to transition some of the engineering
name checks to use DCE versions.. they tend to be more
accurate and exact. (in some cases we can't, but most of
the time we can)
* edid1_detailed_timing_raw was missing
a field which threw off the sync bits.
* The result was the monitor will receive
a different sync polarity than it requested.
Most monitors handle this, but it is still
a bug
* Remove non-generic radeon dp_get_lane_count
* Set lane count and link rate at set_display_mode
* Pass entire mode to pll_set vs only pixel clock for DP code
* Add helpers for DP config data to common code
* Obtain more correct link rate
* This puts the registers in a better state and ensures
all model dependant defines are prefixed with card series
* Consolidate evergreen defines into single header
* First steps at getting card command processor wired
up to the ring buffers.
* Code doesn't run yet as I have *no* idea what happens
when these rings are in an invalid state.
* General DisplayPort functions in common dp.cpp
* DP port information struct in common header
* Please don't use this private accelerant common DP
code just yet as it is very early.
* The AtomBIOS timeout fix has made my DP bridge
stop working
* The current DisplayPort code is a little lacking
on DP link training... I think thats the cause.
* This puts the first steps towards DP training
in place.
* I plan on trying to make some of this DP stuff
common accelerant stuff after it works.
* I'd rather this be common code, but I don't have access
to the DisplayPort specifications. If I added it as common
code I would want to be 100% it was complete and variables
were named properly.
* For now putting in radeon_hd private headers
* add temperature query support for Juniper, Sumo, Evergreen, and North Islands
* add missing thermal defines for evergreen cards
* northern island cards use the evergreen thermal calculations
* add a few missing/needed header defines
* show GPU temp in millidegrees C on r600/r700
* evergreen+ support soon
* function may be moved to driver long term once testing done
* add missing chipset ranges
* add a few more older (X1200) PCI ID's (mostly IGP)
* add code to detect and set frame buffer size on old chipsets
* we get to the connector detection currently and fail due to the
lack of legacy support on my X1200 IGP
* evergreen headers are split due to different
header copyrights
* detect and set up evergreen memory controler
* change the way we manage radeon chipsets to
more closely match drm driver as the chipset
model numbers aren't in order and change from
numbers to names.
* check for evergreen when populating frame buffer
information.
* style cleanup
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43225 a95241bf-73f2-0310-859d-f6bbb57e9c96
There were a large number if incorrect, duplicated, misplaced
registers that were leading to bugs in the code. This is my first
shot at cleaning them up. Luckly as we are using AtomBIOS the number
of registers we need to know about is shrinking.
* remove registers left over from register banging days
* r770 is less then r710, r720 in the drm sources. Fix in code.
* enable newer radeons for testing
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42930 a95241bf-73f2-0310-859d-f6bbb57e9c96
* don't resize the frame buffer after mapping it.. doesn't make sense
* add memory controller code and program the memory controller for r600
* remove unneeded frame_buffer_int
* don't malloc mc_info, waste of time
* fix scaler setting
* vramStart in mc should be 0... get vertical colored lines however when this
this is set properly (everything in mc_info is the MC view of FB BAR)
When vramStart is the FB physical address... i get proper video on some cards
... thoughts?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42924 a95241bf-73f2-0310-859d-f6bbb57e9c96
* we can now utilize these chipset
flags throughout the driver to better id
cards and features
* remove leftover BIOS size define from intel skel
* no *real* functional change
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42904 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add potential support for IGP chipsets
* igp code is *untested* and should work *in theory*
* potentially resolves#8040 / #8046 ?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42901 a95241bf-73f2-0310-859d-f6bbb57e9c96
* will fix other var names to match style guidelines
shortly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42891 a95241bf-73f2-0310-859d-f6bbb57e9c96
base intel_extreme driver long ago
* no functional change
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42880 a95241bf-73f2-0310-859d-f6bbb57e9c96
* correct? color mode setting bug
* fix var naming to match style guidelines
* add a few missing register defines
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42879 a95241bf-73f2-0310-859d-f6bbb57e9c96
(they are actually reversed), so introduce a find_reg() inline function to map
such regs individually instead. Should fix interrupt storms on SandyBridge.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42870 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also add the definitions and some specifics for IronLake (ILK), but keep the
IDs disabled as at least the one version I can test with doesn't work yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42869 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Make the pointer style consistent accross all components, which should make it
easier when working all over the place.
* 80 char limits.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42863 a95241bf-73f2-0310-859d-f6bbb57e9c96
control block. Doesn't matter on (G)MCH (they are the same register block tehre)
but fixes mode setting on PCH again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42862 a95241bf-73f2-0310-859d-f6bbb57e9c96
register blocks and we encode their block into the register definition. On
register access these blocks are then translated into the final address.
* Set up the register blocks for (G)MCH and PCH variants.
* Remove most SandyBridge code that was actually PCH specific and is now taken
care of automatically.
* This will temporarily break SandyBridge support again until the right
transcoders are actually programmed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42857 a95241bf-73f2-0310-859d-f6bbb57e9c96
(the one in my new ThinkPad X1). The PLL is still off a bit so it has a few
blurry stripes, but EDID and mode setting basically works.
* Starting with IronLake the north/south bridge or (G)MCH/ICH setup was moved
into a platform control hub (PCH) which means that many registers previously
located in the GMCH are now in the PCH and have a new address.
* I'm committing this mostly because this way the additions are more easy to
follow. It is a bit messy and I'll clean it up more and possibly make it a
bit more generic. Also most of these changes actually apply to IronLake and up
and aren't SandyBridge specific, so a few of those additions will still get a
broader scope and new chips will be added.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42839 a95241bf-73f2-0310-859d-f6bbb57e9c96
* rename decode_* to get_*
* clean up get_* text when unknown connector/encoder
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42717 a95241bf-73f2-0310-859d-f6bbb57e9c96
(.c to keep compatibility with older C accelerants)
* use functions for decoding video_electronics
* thanks for the guidance Axel!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42668 a95241bf-73f2-0310-859d-f6bbb57e9c96
this seems like it could be useful for more then
just radeon_hd.
* idea from linux drm driver
* feedback / flames welcome
* can move into radeon_hd private defines if requested
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42662 a95241bf-73f2-0310-859d-f6bbb57e9c96
* malloc storage for mc state info
* redo pll range struct
* change to ATOM_ENCODER_MODE for connector info
* redo pll calculations to match AtomBIOS requirements
* some structure changes
* no longer init already posted AtomBIOS as it
causes an infinite loop of AtomBIOS calls
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42644 a95241bf-73f2-0310-859d-f6bbb57e9c96
* when TRACE_ATOM is enabled in bios.c, we dump
each accelerant instance of the AtomBIOS rom
to disk in /boot/common/cache/tmp/ (next to usb
hid descriptors in the same file name format)
* these images can be parsed with the AtomDis application
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42622 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add igp property to pciid map
* add disabled bios pull for r700 and ni cards
* refactor model numbering as >R700 AMD switched
to named card families
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42596 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add missing header for some radeon registers
* begin removing now un-needed direct register calls
* move and refactor crtc functions
* fix function naming to be clearer
* create more AtomBIOS style calls
* this will eat your cat at the moment, don't bother testing
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42582 a95241bf-73f2-0310-859d-f6bbb57e9c96
* implement various methods to pull AtomBIOS from card
* add some missing registers to headers from linux drm driver
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42553 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Point AtomBIOS to PCI rom mapped in memory
* Things no longer crash, but we get an Invalid BIOS Magic error
in the logs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42543 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Pull pci_rom base address from pci subsystem
* Point AtomBIOS parser to pci rom address
to set up and malloc atom_context
* This is untested! Don't run on an
expensive card until I test it on a cheaper
one!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42541 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add missing Idle call for connectors
* Reformulate blanking.. this should match what the
register is after the GTF vesa call
* Set FrameBuffer to card internal address
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42509 a95241bf-73f2-0310-859d-f6bbb57e9c96
into a usable function - this has some coding style issues I did not care to
fix.
* _AddBaseMode() now computes the mode in case it is not present in the list
yet.
* This should help with bug #7787.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42420 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add crtControl global register
* Add grphUpdate storage
* Do some logical reordering of register writes
* Correct crt final power-on checks
* Enhance tracing
* Disable PLL, it is needed but seems to completely break
the modesetting resulting in black-screen-of-doom.
(fixing PLL set/calibration is now priority one)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42380 a95241bf-73f2-0310-859d-f6bbb57e9c96
* pass mapped frame buffer area id to accelerant
* remove my temporary hacked together frame buffer memory mapping
* completely rely on PCI BAR for now for aperture size / location instead of
R6XX_CONFIG_FB_BASE reg.
* Remove my temporary AllocateFB function.
* set grphPrimarySurfaceAddr to physical memory frame buffer location (offset 0)
* fix P/N sync setting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41722 a95241bf-73f2-0310-859d-f6bbb57e9c96
* make shared memory info naming clearer.
* move frame buffer internal offset read to driver
* remove check of > 512MB as we really should always use frame_buffer_size
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41569 a95241bf-73f2-0310-859d-f6bbb57e9c96
* remove device_type and replace with device_chipset
* change MEMSIZE to >> 10 as r600-r700 store this in bytes (r800 uses MB and will be fixed soon)
* add if statement to select what register locations to use based on chipset
** Maybe use a struct or something to store these in a standardized way?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41525 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add boot item support to radeon hd driver
* add edid storage to shared info
* add pull of active monitor VESA EDID to radeon hd driver (until AtomBios complete)
* EDID pulled in driver now passed to create_display_modes
* move registers to external stock xorg radeon hd register headers (lic. allows it)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41411 a95241bf-73f2-0310-859d-f6bbb57e9c96
