The CPUID function 1 has a bit called OSXSAVE which tells user space the
status of the CR4.OSXSAVE bit. Our generic CPUID function injects that bit
based on the status of CR4.
With Hypervisor.framework, we do not synchronize full CPU state often enough
for this function to see the CR4 update before guest user space asks for it.
To be on the save side, let's just always synchronize it when we receive a
CPUID(1) request. That way we can set the bit with real confidence.
Reported-by: Asad Ali <asad@osaro.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-Id: <20210123004129.6364-1-agraf@csgraf.de>
[RB: resolved conflict with another CPUID change]
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some guests (ex. Darwin-XNU) can attemp to read this MSR to retrieve and
validate CPU topology comparing it to ACPI MADT content
MSR description from Intel Manual:
35H: MSR_CORE_THREAD_COUNT: Configured State of Enabled Processor Core
Count and Logical Processor Count
Bits 15:0 THREAD_COUNT The number of logical processors that are
currently enabled in the physical package
Bits 31:16 Core_COUNT The number of processor cores that are currently
enabled in the physical package
Bits 63:32 Reserved
Signed-off-by: Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
Message-Id: <20210113205323.33310-1-yaroshchuk2000@gmail.com>
[RB: reordered MSR definition and dropped u suffix from shift offset]
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hvf i386 has a few struct and cpp definitions that are never
used. Remove them.
Suggested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-Id: <20210120224444.71840-3-agraf@csgraf.de>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For `-accel hvf` cpu_x86_cpuid() is wrapped with hvf_cpu_x86_cpuid() to
add paravirtualization cpuid leaf 0x40000010
https://lkml.org/lkml/2008/10/1/246
Leaf 0x40000010, Timing Information:
EAX: (Virtual) TSC frequency in kHz.
EBX: (Virtual) Bus (local apic timer) frequency in kHz.
ECX, EDX: RESERVED (Per above, reserved fields are set to zero).
On macOS TSC and APIC Bus frequencies can be readed by sysctl call with
names `machdep.tsc.frequency` and `hw.busfrequency`
This options is required for Darwin-XNU guest to be synchronized with
host
Leaf 0x40000000 not exposes HVF leaving hypervisor signature empty
Signed-off-by: Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
Message-Id: <20210122150518.3551-1-yaroshchuk2000@gmail.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This prevents illegal instruction on cpus that do not support xgetbv.
Buglink: https://bugs.launchpad.net/qemu/+bug/1758819
Reviewed-by: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Hill Ma <maahiuzeon@gmail.com>
Message-Id: <X/6OJ7qk0W6bHkHQ@Hills-Mac-Pro.local>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the sev_es_enabled() function return value to be based on the SEV
policy that has been specified. SEV-ES is enabled if SEV is enabled and
the SEV-ES policy bit is set in the policy object.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <c69f81c6029f31fc4c52a9f35f1bd704362476a5.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SMM is not currently supported for an SEV-ES guest by KVM. Change the SMM
capability check from a KVM-wide check to a per-VM check in order to have
a finer-grained SMM capability check.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <f851903809e9d4e6a22d5dfd738dac8da991e28d.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An SEV-ES guest does not allow register state to be altered once it has
been measured. When an SEV-ES guest issues a reboot command, Qemu will
reset the vCPU state and resume the guest. This will cause failures under
SEV-ES. Prevent that from occuring by introducing an arch-specific
callback that returns a boolean indicating whether vCPUs are resettable.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <1ac39c441b9a3e970e9556e1cc29d0a0814de6fd.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SEV-ES is enabled, it is not possible modify the guests register
state after it has been initially created, encrypted and measured.
Normally, an INIT-SIPI-SIPI request is used to boot the AP. However, the
hypervisor cannot emulate this because it cannot update the AP register
state. For the very first boot by an AP, the reset vector CS segment
value and the EIP value must be programmed before the register has been
encrypted and measured. Search the guest firmware for the guest for a
specific GUID that tells Qemu the value of the reset vector to use.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <22db2bfb4d6551aed661a9ae95b4fdbef613ca21.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In prep for AP booting, require the use of in-kernel irqchip support. This
lessens the Qemu support burden required to boot APs.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <e9aec5941e613456f0757f5a73869cdc5deea105.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide initial support for SEV-ES. This includes creating a function to
indicate the guest is an SEV-ES guest (which will return false until all
support is in place), performing the proper SEV initialization and
ensuring that the guest CPU state is measured as part of the launch.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Co-developed-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <2e6386cbc1ddeaf701547dd5677adf5ddab2b6bd.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the gpa isn't specified, it's value is extracted from the OVMF
properties table located below the reset vector (and if this doesn't
exist, an error is returned). OVMF has defined the GUID for the SEV
secret area as 4c2eb361-7d9b-4cc3-8081-127c90d3d294 and the format of
the <data> is: <base>|<size> where both are uint32_t. We extract
<base> and use it as the gpa for the injection.
Note: it is expected that the injected secret will also be GUID
described but since qemu can't interpret it, the format is left
undefined here.
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210204193939.16617-3-jejb@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OVMF is developing a mechanism for depositing a GUIDed table just
below the known location of the reset vector. The table goes
backwards in memory so all entries are of the form
<data>|len|<GUID>
Where <data> is arbtrary size and type, <len> is a uint16_t and
describes the entire length of the entry from the beginning of the
data to the end of the guid.
The foot of the table is of this form and <len> for this case
describes the entire size of the table. The table foot GUID is
defined by OVMF as 96b582de-1fb2-45f7-baea-a366c55a082d and if the
table is present this GUID is just below the reset vector, 48 bytes
before the end of the firmware file.
Add a parser for the ovmf reset block which takes a copy of the block,
if the table foot guid is found, minus the footer and a function for
later traversal to return the data area of any specified GUIDs.
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210204193939.16617-2-jejb@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the now-saved PAGE_ANON and PAGE_MTE bits,
and the per-page saved data.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The real kernel collects _TIF_MTE_ASYNC_FAULT into the current thread's
state on any kernel entry (interrupt, exception etc), and then delivers
the signal in advance of resuming the thread.
This means that while the signal won't be delivered immediately, it will
not be delayed forever -- at minimum it will be delivered after the next
clock interrupt.
We don't have a clock interrupt in linux-user, so we issue a cpu_kick
to signal a return to the main loop at the end of the current TB.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A proper syndrome is required to fill in the proper si_code.
Use page_get_flags to determine permission vs translation for user-only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move everything related to syndromes to a new file,
which can be shared with linux-user.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210212184902.1251044-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remember the PROT_MTE bit as PAGE_MTE/PAGE_TARGET_2.
Otherwise this does not yet have effect.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were fudging TBI1 enabled to speed up the generated code.
Now that we've improved the code generation, remove this.
Also, tidy the comment to reflect the current code.
The pauth test was testing a kernel address (-1) and making
incorrect assumptions about TBI1; stick to userland addresses.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use simple arithmetic instead of a conditional
move when tbi0 != tbi1.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the prctl bit that controls whether syscalls accept tagged
addresses. See Documentation/arm64/tagged-address-abi.rst in the
linux kernel.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use g2h_untagged in contexts that have no cpu, e.g. the binary
loaders that operate before the primary cpu is created. As a
colollary, target_mmap and friends must use untagged addresses,
since they are used by the loaders.
Use g2h_untagged on values returned from target_mmap, as the
kernel never applies a tag itself.
Use g2h_untagged on all pc values. The only current user of
tags, aarch64, removes tags from code addresses upon branch,
so "pc" is always untagged.
Use g2h with the cpu context on hand wherever possible.
Use g2h_untagged in lock_user, which will be updated soon.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We used to make a distinction between 'float64'/'float32' types and
the 'uint64_t'/'uint32_t' types, requiring special conversion
operations to go between them. We've now dropped this distinction as
unnecessary, and the 'float*' types remain primarily for
documentation purposes when used in places like the function
prototypes of TCG helper functions.
This means that there's no need for a special gdb_get_float64()
function to write a float64 value to the GDB protocol buffer; we can
just use gdb_get_reg64().
Similarly, for reading a value out of the GDB buffer into a float64
we can use ldq_p() and need not use ldfq_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210208113428.7181-4-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-13-alex.bennee@linaro.org>
We used to make a distinction between 'float64'/'float32' types and
the 'uint64_t'/'uint32_t' types, requiring special conversion
operations to go between them. We've now dropped this distinction as
unnecessary, and the 'float*' types remain primarily for
documentation purposes when used in places like the function
prototypes of TCG helper functions.
This means that there's no need for a special gdb_get_float64()
function to write a float64 value to the GDB protocol buffer; we can
just use gdb_get_reg64().
Similarly, for reading a value out of the GDB buffer into a float64
we can use ldq_p() and need not use ldfq_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210208113428.7181-3-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-12-alex.bennee@linaro.org>
We used to make a distinction between 'float64'/'float32' types and
the 'uint64_t'/'uint32_t' types, requiring special conversion
operations to go between them. We've now dropped this distinction as
unnecessary, and the 'float*' types remain primarily for
documentation purposes when used in places like the function
prototypes of TCG helper functions.
This means that there's no need for a special gdb_get_float32()
function to write a float32 value to the GDB protocol buffer; we can
just use gdb_get_reg32().
Similarly, for reading a value out of the GDB buffer into a float32
we can use ldl_p() and need not use ldfl_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210208113428.7181-2-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-11-alex.bennee@linaro.org>
On m68k there are two varities of stack pointers: USP with SSP or ISP/MSP.
Only the 68020/30/40 support the MSP register the stack swap helpers don't
support this feature.
This patch adds this support, as well as comments to CPUM68KState to
make it clear how stacks are handled
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <c61ad2d8b39f3b03b431819b6bf602a1c332b921.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add CPU class detection for each CR type in the m68k_move_to/from helpers,
so that it throws and exception if an unsupported register is requested
for that CPU class.
Reclassified MOVEC insn. as only supported from 68010.
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <fc0d0187478716f05d990949347071969b743151.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The BUSCR/PCR CR defines were missing for 68060, and the move_to/from helper
functions were also missing a decode for the 68060 M68K_CR_CAAR CR register.
Added missing defines, and respective decodes for all three CR registers to
the helpers.
Although this patch defines them, the implementation is empty in this patch
and these registers will result in a cpu abort - which is the default prior
to this patch.
This patch aims to reach full coverage of all CR registers within the helpers.
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <19e5c0fa8baed6479ed0502fd3deb132d19457fb.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add more detailed comments to each case of m68k_move_to/from helpers to list
the supported CPUs for that CR as they were wrong in some cases, and
missing some cpu classes in other cases.
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <a8bd70b66e3dbdb7d2ab7a852af71cdbf341d50c.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The m680XX_cpu_initfn functions have been rearranged to cascade starting from
the base 68000, so that the 68010 then inherits from this, and so on until the
68060.
This makes it simpler to track features since in most cases the m68k were
product enhancements on each other, with only a few instructions being retired.
Because each cpu class inherits the previous CPU class, then for example
the 68020 also has the feature 68010, and 68000 and so on upto the 68060.
- Added 68010 cpu class, and moved correct features into 68000/68010.
- Added m68k_unset_feature to allow removing a feature in the inheritence
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <c652fe7537f8b4fe87a13ecbbc0ea751fb71532f.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Improvement in comments for the instantiation functions.
This is to highlight what each cpu class, in the 68000 series, contains
in terms of instructions/features.
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <2dfe32672ee6ddce4b54c6bcfce579d35abeaf51.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When working with performance monitoring counters, we look at
MDCR_EL2.HPMN as part of the check whether a counter is enabled. This
check fails, because MDCR_EL2.HPMN is reset to 0, meaning that no
counters are "enabled" for < EL2.
That's in violation of the Arm specification, which states that
> On a Warm reset, this field [MDCR_EL2.HPMN] resets to the value in
> PMCR_EL0.N
That's also what a comment in the code acknowledges, but the necessary
adjustment seems to have been forgotten when support for more counters
was added.
This change fixes the issue by setting the reset value to PMCR.N, which
is four.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cpsr has been treated as being the same as spsr, but it isn't.
Since PSTATE_SS isn't in cpsr, remove it and move it into env->pstate.
This allows us to add support for CPSR_DIT, adding helper functions
to merge SPSR_ELx to and from CPSR.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210208065700.19454-3-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for FEAT_DIT. DIT (Data Independent Timing) is a required
feature for ARMv8.4. Since virtual machine execution is largely
nondeterministic and TCG is outside of the security domain, it's
implemented as a NOP.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210208065700.19454-2-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The FW and AW bits of SCR_EL3 are RES1 only in some contexts. Force them
to 1 only when there is no support for AArch32 at EL1 or above.
The reset value will be 0x30 only if the CPU is AArch64-only; if there
is support for AArch32 at EL1 or above, it will be reset to 0.
Also adds helper function isar_feature_aa64_aa32_el1 to check if AArch32
is supported at EL1 or above.
Signed-off-by: Mike Nawrocki <michael.nawrocki@gtri.gatech.edu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210203165552.16306-2-michael.nawrocki@gtri.gatech.edu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As feature flags are added or removed, the meanings of bits in the
`features` field can change between QEMU versions, causing migration
failures. Additionally, migrating the field is not useful because it is
a constant function of the CPU being used.
Fixes: LP:1914696
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per EREF 2.0 [1] chapter 3.11.2:
The following bits in L2CSR0 (exists in the e500mc/e5500/e6500 core):
- L2FI (L2 cache flash invalidate)
- L2FL (L2 cache flush)
- L2LFC (L2 cache lock flash clear)
when set, a cache operation is initiated by hardware, and these bits
will be cleared when the operation is complete.
Since we don't model cache in QEMU, let's add a write helper to emulate
the cache operations completing instantly.
[1] https://www.nxp.com/files-static/32bit/doc/ref_manual/EREFRM.pdf
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <1612925152-20913-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Remove these confusing and unused definitions.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210127232401.3525126-1-f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Expose the VMX exit/entry load pkrs control bits in
VMX_TRUE_EXIT_CTLS/VMX_TRUE_ENTRY_CTLS MSRs to guest, which supports the
PKS in nested VM.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210205083325.13880-3-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PKS introduces MSR IA32_PKRS(0x6e1) to manage the supervisor protection
key rights. Page access and writes can be managed via the MSR update
without TLB flushes when permissions change.
Add the support to save/load IA32_PKRS MSR in guest.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210205083325.13880-2-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Protection Keys for Supervisor-mode pages is a simple extension of
the PKU feature that QEMU already implements. For supervisor-mode
pages, protection key restrictions come from a new MSR. The MSR
has no XSAVE state associated to it.
PKS is only respected in long mode. However, in principle it is
possible to set the MSR even outside long mode, and in fact
even the XSAVE state for PKRU could be set outside long mode
using XRSTOR. So do not limit the migration subsections for
PKRU and PKRS to long mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes a translation bug for a subset of x86 BMI instructions
such as the following:
c4 e2 f9 f7 c0 shlxq %rax, %rax, %rax
Currently, these incorrectly generate an undefined instruction exception
when SSE is disabled via CR4, while instructions like "shrxq" work fine.
The problem appears to be related to BMI instructions encoded using VEX
and with a mandatory prefix of "0x66" (data). Instructions with this
data prefix (such as shlxq) are currently rejected. Instructions with
other mandatory prefixes (such as shrxq) translate as expected.
This patch removes the incorrect check in "gen_sse" that causes the
exception to be generated. For the non-BMI cases, the check is
redundant: prefixes are already checked at line 3696.
Buglink: https://bugs.launchpad.net/qemu/+bug/1748296
Signed-off-by: David Greenaway <dgreenaway@google.com>
Message-Id: <20210114063958.1508050-1-dgreenaway@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Newer AMD CPUs will add CPUID_0x8000000A_EDX[28] bit, which indicates
that SVM instructions (VMRUN/VMSAVE/VMLOAD) will trigger #VMEXIT before
CPU checking their EAX against reserved memory regions. This change will
allow the hypervisor to avoid intercepting #GP and emulating SVM
instructions. KVM turns on this CPUID bit for nested VMs. In order to
support it, let us populate this bit, along with other SVM feature bits,
in FEAT_SVM.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Message-Id: <20210126202456.589932-1-wei.huang2@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
32-bit targets by definition do not support long mode; therefore, the
bit must be masked in the features supported by the accelerator.
As a side effect, this avoids setting up the 0x80000008 CPUID leaf
for
qemu-system-i386 -cpu host
which since commit 5a140b255d ("x86/cpu: Use max host physical address
if -cpu max option is applied") would have printed this error:
qemu-system-i386: phys-bits should be between 32 and 36 (but is 48)
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some upcoming POWER machines have a system called PEF (Protected
Execution Facility) which uses a small ultravisor to allow guests to
run in a way that they can't be eavesdropped by the hypervisor. The
effect is roughly similar to AMD SEV, although the mechanisms are
quite different.
Most of the work of this is done between the guest, KVM and the
ultravisor, with little need for involvement by qemu. However qemu
does need to tell KVM to allow secure VMs.
Because the availability of secure mode is a guest visible difference
which depends on having the right hardware and firmware, we don't
enable this by default. In order to run a secure guest you need to
create a "pef-guest" object and set the confidential-guest-support
property to point to it.
Note that this just *allows* secure guests, the architecture of PEF is
such that the guest still needs to talk to the ultravisor to enter
secure mode. Qemu has no direct way of knowing if the guest is in
secure mode, and certainly can't know until well after machine
creation time.
To start a PEF-capable guest, use the command line options:
-object pef-guest,id=pef0 -machine confidential-guest-support=pef0
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
While we've abstracted some (potential) differences between mechanisms for
securing guest memory, the initialization is still specific to SEV. Given
that, move it into x86's kvm_arch_init() code, rather than the generic
kvm_init() code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The platform specific details of mechanisms for implementing
confidential guest support may require setup at various points during
initialization. Thus, it's not really feasible to have a single cgs
initialization hook, but instead each mechanism needs its own
initialization calls in arch or machine specific code.
However, to make it harder to have a bug where a mechanism isn't
properly initialized under some circumstances, we want to have a
common place, late in boot, where we verify that cgs has been
initialized if it was requested.
This patch introduces a ready flag to the ConfidentialGuestSupport
base type to accomplish this, which we verify in
qemu_machine_creation_done().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
This allows failures to be reported richly and idiomatically.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Currently the "memory-encryption" property is only looked at once we
get to kvm_init(). Although protection of guest memory from the
hypervisor isn't something that could really ever work with TCG, it's
not conceptually tied to the KVM accelerator.
In addition, the way the string property is resolved to an object is
almost identical to how a QOM link property is handled.
So, create a new "confidential-guest-support" link property which sets
this QOM interface link directly in the machine. For compatibility we
keep the "memory-encryption" property, but now implemented in terms of
the new property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
When AMD's SEV memory encryption is in use, flash memory banks (which are
initialed by pc_system_flash_map()) need to be encrypted with the guest's
key, so that the guest can read them.
That's abstracted via the kvm_memcrypt_encrypt_data() callback in the KVM
state.. except, that it doesn't really abstract much at all.
For starters, the only call site is in code specific to the 'pc'
family of machine types, so it's obviously specific to those and to
x86 to begin with. But it makes a bunch of further assumptions that
need not be true about an arbitrary confidential guest system based on
memory encryption, let alone one based on other mechanisms:
* it assumes that the flash memory is defined to be encrypted with the
guest key, rather than being shared with hypervisor
* it assumes that that hypervisor has some mechanism to encrypt data into
the guest, even though it can't decrypt it out, since that's the whole
point
* the interface assumes that this encrypt can be done in place, which
implies that the hypervisor can write into a confidential guests's
memory, even if what it writes isn't meaningful
So really, this "abstraction" is actually pretty specific to the way SEV
works. So, this patch removes it and instead has the PC flash
initialization code call into a SEV specific callback.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Several architectures have mechanisms which are designed to protect
guest memory from interference or eavesdropping by a compromised
hypervisor. AMD SEV does this with in-chip memory encryption and
Intel's TDX can do similar things. POWER's Protected Execution
Framework (PEF) accomplishes a similar goal using an ultravisor and
new memory protection features, instead of encryption.
To (partially) unify handling for these, this introduces a new
ConfidentialGuestSupport QOM base class. "Confidential" is kind of vague,
but "confidential computing" seems to be the buzzword about these schemes,
and "secure" or "protected" are often used in connection to unrelated
things (such as hypervisor-from-guest or guest-from-guest security).
The "support" in the name is significant because in at least some of the
cases it requires the guest to take specific actions in order to protect
itself from hypervisor eavesdropping.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This will allow us to centralize the registration of
the cpus.c module accelerator operations (in accel/accel-softmmu.c),
and trigger it automatically using object hierarchy lookup from the
new accel_init_interfaces() initialization step, depending just on
which accelerators are available in the code.
Rename all tcg-cpus.c, kvm-cpus.c, etc to tcg-accel-ops.c,
kvm-accel-ops.c, etc, matching the object type names.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-18-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
commit 568496c0c0 ("cpu: Add callback to check architectural") and
commit 3826121d92 ("target-arm: Implement checking of fired")
introduced an ARM-specific hack for cpu_check_watchpoint.
Make debug_check_watchpoint optional, and move it to tcg_ops.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-15-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
commit 4061200059 ("arm: Correctly handle watchpoints for BE32 CPUs")
introduced this ARM-specific, TCG-specific hack to adjust the address,
before checking it with cpu_check_watchpoint.
Make adjust_watchpoint_address optional and move it to tcg_ops.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-14-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
make it consistently SOFTMMU-only.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: make the field presence in cpu.h unconditional, removing the ifdefs]
Message-Id: <20210204163931.7358-12-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: wrap target code around CONFIG_TCG and !CONFIG_USER_ONLY]
avoiding its use in headers used by common_ss code (should be poisoned).
Note: need to be careful with the use of CONFIG_USER_ONLY,
Message-Id: <20210204163931.7358-11-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cc->do_interrupt is in theory a TCG callback used in accel/tcg only,
to prepare the emulated architecture to take an interrupt as defined
in the hardware specifications,
but in reality the _do_interrupt style of functions in targets are
also occasionally reused by KVM to prepare the architecture state in a
similar way where userspace code has identified that it needs to
deliver an exception to the guest.
In the case of ARM, that includes:
1) the vcpu thread got a SIGBUS indicating a memory error,
and we need to deliver a Synchronous External Abort to the guest to
let it know about the error.
2) the kernel told us about a debug exception (breakpoint, watchpoint)
but it is not for one of QEMU's own gdbstub breakpoints/watchpoints
so it must be a breakpoint the guest itself has set up, therefore
we need to deliver it to the guest.
So in order to reuse code, the same arm_do_interrupt function is used.
This is all fine, but we need to avoid calling it using the callback
registered in CPUClass, since that one is now TCG-only.
Fortunately this is easily solved by replacing calls to
CPUClass::do_interrupt() with explicit calls to arm_do_interrupt().
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210204163931.7358-9-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
for now only TCG is allowed as an accelerator for riscv,
so remove the CONFIG_TCG use.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-3-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCG-specific CPU methods will be moved to a separate struct,
to make it easier to move accel-specific code outside generic CPU
code in the future. Start by moving tcg_initialize().
The new CPUClass.tcg_opts field may eventually become a pointer,
but keep it an embedded struct for now, to make code conversion
easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[claudio: move TCGCpuOperations inside include/hw/core/cpu.h]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Only define the register if it exists for the cpu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210120031656.737646-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was defined at some point before ARMv8.4, and will
shortly be used by new processor descriptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gcc (Debian 10.2.1-6) 10.2.1 20210110 aborts builds with enabled sanitizers:
../../../target/rx/op_helper.c: In function ‘helper_scmpu’:
../../../target/rx/op_helper.c:213:24: error: ‘tmp1’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
213 | env->psw_c = (tmp0 >= tmp1);
| ~~~~~~^~~~~~~~
../../../target/rx/op_helper.c:213:24: error: ‘tmp0’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
../../../target/rx/op_helper.c: In function ‘helper_suntil’:
../../../target/rx/op_helper.c:299:23: error: ‘tmp’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
299 | env->psw_c = (tmp <= env->regs[2]);
| ~~~~~^~~~~~~~~~~~~~~~
../../../target/rx/op_helper.c: In function ‘helper_swhile’:
../../../target/rx/op_helper.c:318:23: error: ‘tmp’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
318 | env->psw_c = (tmp <= env->regs[2]);
| ~~~~~^~~~~~~~~~~~~~~~
Rewriting the code fixes those errors.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210128172127.46041-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Using the cfg.use_non_secure bitfield and the MMU access type, we can determine
if the access should be secure or not.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <1611274735-303873-4-git-send-email-komlodi@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Using MMUAccessType makes it more clear what the variable's use is.
No functional change.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <1611274735-303873-3-git-send-email-komlodi@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This property is used to control the security of the following interfaces
on MicroBlaze:
M_AXI_DP - data interface
M_AXI_IP - instruction interface
M_AXI_DC - dcache interface
M_AXI_IC - icache interface
It works by enabling or disabling the use of the non_secure[3:0] signals.
Interfaces and their corresponding values are taken from:
https://www.xilinx.com/support/documentation/sw_manuals/xilinx2020_2/ug984-vivado-microblaze-ref.pdf
page 153.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <1611274735-303873-2-git-send-email-komlodi@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
QEMU option -cpu max(max_features) means "Enables all features supported by
the accelerator in the current host", this looks true for all the features
except guest max physical address width, so add this patch to enable it.
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20210113090430.26394-1-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using strncpy with length equal to the size of target array, GCC 11
reports following warning:
warning: '__builtin_strncpy' specified bound 256 equals destination size [-Wstringop-truncation]
We can prevent this warning by using strpadcpy that copies string
up to specified length, zeroes target array after copied string
and does not raise warning when length is equal to target array
size (and ending '\0' is discarded).
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <6f86915755219cf6a671788075da4809b57f7d7b.1610607906.git.mrezanin@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In our EXECUTE fast path, we have to ignore the content of r0, if
specified by b1 or b2.
Fixes: d376f123c7 ("target/s390x: Re-implement a few EXECUTE target insns directly")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210111163845.18148-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Using get_address() with register identifiers comming from an "r" field
is wrong: if the "r" field designates "r0", we don't read the content
and instead assume 0 - which should only be applied when the register
was specified via "b" or "x".
PoP 5-11 "Operand-Address Generation":
"A zero in any of the B1, B2, X2, B3, or B4 fields indicates the absence
of the corresponding address component. For the absent component, a zero
is used in forming the intermediate sum, regardless of the contents of
general register 0. A displacement of zero has no special significance."
This BUG became visible for CSPG as generated by LLVM-12 in the upstream
Linux kernel (v5.11-rc2), used while creating the linear mapping in
vmem_map_init(): Trying to store to address 0 results in a Low Address
Protection exception.
Debugging this was more complicated than it could have been: The program
interrupt handler in the kernel will try to crash the kernel: doing so, it
will enable DAT. As the linear mapping is not created yet (asce=0), we run
into an addressing exception while tring to walk non-existant DAT tables,
resulting in a program exception loop.
This allows for booting upstream Linux kernels compiled by clang-12. Most
of these cases seem to be broken forever.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210111163845.18148-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
RISBHG is broken and currently hinders clang-11 builds of upstream kernels
from booting: the kernel crashes early, while decompressing the image.
[...]
Kernel fault: interruption code 0005 ilc:2
Kernel random base: 0000000000000000
PSW : 0000200180000000 0000000000017a1e
R:0 T:0 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:2 PM:0 RI:0 EA:3
GPRS: 0000000000000001 0000000c00000000 00000003fffffff4 00000000fffffff0
0000000000000000 00000000fffffff4 000000000000000c 00000000fffffff0
00000000fffffffc 0000000000000000 00000000fffffff8 00000000008e25a8
0000000000000009 0000000000000002 0000000000000008 000000000000bce0
One example of a buggy instruction is:
17dde: ec 1e 00 9f 20 5d risbhg %r1,%r14,0,159,32
With %r14 = 0x9 and %r1 = 0x7 should result in %r1 = 0x900000007, however,
results in %r1 = 0.
Let's interpret values of i3/i4 as documented in the PoP and make
computation of "mask" only based on i3 and i4 and use "pmask" only at the
very end to make sure wrapping is only applied to the high/low doubleword.
With this patch, I can successfully boot a v5.11-rc2 kernel built with
clang-11, and gcc builds keep on working.
Fixes: 2d6a869833 ("target-s390: Implement RISBG")
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210111163845.18148-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Looks like something went wrong whiel touching that line. Instead of "r1"
we need a new temporary. Also, we have to pass MO_TEQ, to indicate that
we are working with 64-bit values. Let's revert these changes.
Fixes: ff26d287bd ("target/s390x: Improve cc computation for ADD LOGICAL")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210111163845.18148-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When building with GCC 10.2 configured with --extra-cflags=-Os, we get:
target/arm/m_helper.c: In function ‘arm_v7m_cpu_do_interrupt’:
target/arm/m_helper.c:1811:16: error: ‘restore_s16_s31’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1811 | if (restore_s16_s31) {
| ^
target/arm/m_helper.c:1350:10: note: ‘restore_s16_s31’ was declared here
1350 | bool restore_s16_s31;
| ^~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Initialize the 'restore_s16_s31' variable to silence the warning.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210119062739.589049-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update all users of do_perm_pred3 for the new
predicate descriptor field definitions.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210113062650.593824-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These two were odd, in that do_pfirst_pnext passed the
count of 64-bit words rather than bytes. Change to pass
the standard pred_full_reg_size to avoid confusion.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210113062650.593824-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SVE predicate operations cannot use the "usual" simd_desc
encoding, because the lengths are not a multiple of 8.
But we were abusing the SIMD_* fields to store values anyway.
This abuse broke when SIMD_OPRSZ_BITS was modified in e2e7168a21.
Introduce a new set of field definitions for exclusive use
of predicates, so that it is obvious what kind of predicate
we are manipulating. To be used in future patches.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210113062650.593824-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds handling for the SCR_EL3.EEL2 bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Message-id: 20210112104511.36576-17-remi.denis.courmont@huawei.com
[PMM: Applied fixes for review issues noted by RTH:
- check for FEATURE_AARCH64 before checking sel2 isar feature
- correct the commit message subject line]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On ARMv8-A, accesses by 32-bit secure EL1 to monitor registers trap to
the upper (64-bit) EL. With Secure EL2 support, we can no longer assume
that that is always EL3, so make room for the value to be computed at
run-time.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-16-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The stage_1_mmu_idx() already effectively keeps track of which
translation regimes have two stages. Don't hard-code another test.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-13-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the secure stage 2 translation regime, the VSTCR.SW and VTCR.NSW
bits can invert the secure flag for pagetable walks. This patchset
allows S1_ptw_translate() to change the non-secure bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-11-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VTTBR write callback so far assumes that the underlying VM lies in
non-secure state. This handles the secure state scenario.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-10-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the MMU indices for EL2 stage 1 in secure state.
To keep code contained, which is largelly identical between secure and
non-secure modes, the MMU indices are reassigned. The new assignments
provide a systematic pattern with a non-secure bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-8-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the ARMv8.4-SEL2 extension, EL2 is a legal exception level in
secure mode, though it can only be AArch64.
This patch adds the target EL for exceptions from 64-bit S-EL2.
It also fixes the target EL to EL2 when HCR.{A,F,I}MO are set in secure
mode. Those values were never used in practice as the effective value of
HCR was always 0 in secure mode.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-7-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-6-remi.denis.courmont@huawei.com
[PMM: tweaked commit message to match reduced scope of patch
following rebase]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a common helper to compute the effective value of MDCR_EL2.
That is the actual value if EL2 is enabled in the current security
context, or 0 elsewise.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-5-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will simplify accessing HCR conditionally in secure state.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-4-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not assume that EL2 is available in and only in non-secure context.
That equivalence is broken by ARMv8.4-SEL2.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-3-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This checks if EL2 is enabled (meaning EL2 registers take effects) in
the current security context.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-2-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In this context, the HCR value is the effective value, and thus is
zero in secure mode. The tests for HCR.{F,I}MO are sufficient.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-1-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The interface for object_property_add_bool is simpler,
making the code easier to understand.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The crypto overhead of emulating pauth can be significant for
some workloads. Add two boolean properties that allows the
feature to be turned off, on with the architected algorithm,
or on with an implementation defined algorithm.
We need two intermediate booleans to control the state while
parsing properties lest we clobber ID_AA64ISAR1 into an invalid
intermediate state.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-3-richard.henderson@linaro.org
[PMM: fixed docs typo, tweaked text to clarify that the impdef
algorithm is specific to QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without hardware acceleration, a cryptographically strong
algorithm is too expensive for pauth_computepac.
Even with hardware accel, we are not currently expecting
to link the linux-user binaries to any crypto libraries,
and doing so would generally make the --static build fail.
So choose XXH64 as a reasonably quick and decent hash.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- clean-ups to docker images
- drop duplicate jobs from shippable
- prettier tag generation (+gtags)
- generate browsable source tree
- more Travis->GitLab migrations
- fix checkpatch to deal with commits
- gate gdbstub tests on 8.3.1, expand tests
- support Xfer:auxv:read gdb packet
- better gdbstub cleanup
- use GDB's SVE register layout
- make arm-compat-semihosting common
- add riscv semihosting support
- add HEAPINFO, ELAPSED, TICKFREQ, TMPNAM and ISERROR to semihosting
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmAFXkcACgkQ+9DbCVqe
KkSP7Af/YNU4dWFf/N9CwvKQTSoJmBrO77HXccOJyYDS62hA8eoh83HWNll+xMV7
GxJDwQs0GS8J3oqcq1DktGgTUkCNxUfbHROjI2YXfRzoWnl0PFHY+Z/qRsq+bRhX
C3CiNCS/nM/NW2Q+H6TAD1MnXkia11+hqFhXrBRKVDON83MSvm0AspS5RO5eVpxo
TUTOD1YND+tAPWi5xAN+NyDuvfoY3tG4S4/DFUrHQfpS7uaHY/4qe8gMmJczveeo
uzJln9M7+pV5cgUWwr1fgCkbSyGgra+KX3GNoLIGS34C88cKRXAp7ZF19A3wQpiy
LXljmOinLfKuJqeRGwcnt6f8GrTn7A==
=XR0h
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-180121-2' into staging
Testing, gdbstub and semihosting patches:
- clean-ups to docker images
- drop duplicate jobs from shippable
- prettier tag generation (+gtags)
- generate browsable source tree
- more Travis->GitLab migrations
- fix checkpatch to deal with commits
- gate gdbstub tests on 8.3.1, expand tests
- support Xfer:auxv:read gdb packet
- better gdbstub cleanup
- use GDB's SVE register layout
- make arm-compat-semihosting common
- add riscv semihosting support
- add HEAPINFO, ELAPSED, TICKFREQ, TMPNAM and ISERROR to semihosting
# gpg: Signature made Mon 18 Jan 2021 10:09:11 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-180121-2: (30 commits)
semihosting: Implement SYS_ISERROR
semihosting: Implement SYS_TMPNAM
semihosting: Implement SYS_ELAPSED and SYS_TICKFREQ
riscv: Add semihosting support for user mode
riscv: Add semihosting support
semihosting: Support SYS_HEAPINFO when env->boot_info is not set
semihosting: Change internal common-semi interfaces to use CPUState *
semihosting: Change common-semi API to be architecture-independent
semihosting: Move ARM semihosting code to shared directories
target/arm: use official org.gnu.gdb.aarch64.sve layout for registers
gdbstub: ensure we clean-up when terminated
gdbstub: drop gdbserver_cleanup in favour of gdb_exit
gdbstub: drop CPUEnv from gdb_exit()
gdbstub: add support to Xfer:auxv:read: packet
gdbstub: implement a softmmu based test
Revert "tests/tcg/multiarch/Makefile.target: Disable run-gdbstub-sha1 test"
configure: gate our use of GDB to 8.3.1 or above
test/guest-debug: echo QEMU command as well
scripts/checkpatch.pl: fix git-show invocation to include diffstat
gitlab: migrate the minimal tools and unit tests from Travis
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/targets/riscv32-linux-user.mak
# default-configs/targets/riscv64-linux-user.mak
Adapt the arm semihosting support code for RISCV. This implementation
is based on the standard for RISC-V semihosting version 0.2 as
documented in
https://github.com/riscv/riscv-semihosting-spec/releases/tag/0.2
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-6-keithp@keithp.com>
Message-Id: <20210108224256.2321-17-alex.bennee@linaro.org>
The public API is now defined in
hw/semihosting/common-semi.h. do_common_semihosting takes CPUState *
instead of CPUARMState *. All internal functions have been renamed
common_semi_ instead of arm_semi_ or arm_. Aside from the API change,
there are no functional changes in this patch.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-3-keithp@keithp.com>
Message-Id: <20210108224256.2321-14-alex.bennee@linaro.org>
This commit renames two files which provide ARM semihosting support so
that they can be shared by other architectures:
1. target/arm/arm-semi.c -> hw/semihosting/common-semi.c
2. linux-user/arm/semihost.c -> linux-user/semihost.c
The build system was modified use a new config variable,
CONFIG_ARM_COMPATIBLE_SEMIHOSTING, which has been added to the ARM
softmmu and linux-user default configs. The contents of the source
files has not been changed in this patch.
Signed-off-by: Keith Packard <keithp@keithp.com>
[AJB: rename arm-compat-semi, select SEMIHOSTING]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210107170717.2098982-2-keithp@keithp.com>
Message-Id: <20210108224256.2321-13-alex.bennee@linaro.org>
While GDB can work with any XML description given to it there is
special handling for SVE registers on the GDB side which makes the
users life a little better. The changes aren't that major and all the
registers save the $vg reported the same. All that changes is:
- report org.gnu.gdb.aarch64.sve
- use gdb nomenclature for names and types
- minor re-ordering of the types to match reference
- re-enable ieee_half (as we know gdb supports it now)
- $vg is now a 64 bit int
- check $vN and $zN aliasing in test
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Machado <luis.machado@linaro.org>
Message-Id: <20210108224256.2321-11-alex.bennee@linaro.org>
gdb_exit() has never needed anything from env and I doubt we are going
to start now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-8-alex.bennee@linaro.org>
At present QEMU RISC-V uses a hardcoded XML to report the feature
"org.gnu.gdb.riscv.csr" [1]. There are two major issues with the
approach being used currently:
- The XML does not specify the "regnum" field of a CSR entry, hence
consecutive numbers are used by the remote GDB client to access
CSRs. In QEMU we have to maintain a map table to convert the GDB
number to the hardware number which is error prone.
- The XML contains some CSRs that QEMU does not implement at all,
which causes an "E14" response sent to remote GDB client.
Change to generate the CSR register list dynamically, based on the
availability presented in the CSR function table. This new approach
will reflect a correct list of CSRs that QEMU actually implements.
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/RISC_002dV-Features.html#RISC_002dV-Features
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210116054123.5457-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In preparation to generate the CSR register list for GDB stub
dynamically, let's add the CSR name in the CSR function table.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1610427124-49887-3-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In preparation to generate the CSR register list for GDB stub
dynamically, change csr_ops[] to non-static so that it can be
referenced externally.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1610427124-49887-2-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the privilege specification, any access from S/U mode should fail
if no pmp region is configured.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201223192553.332508-1-atish.patra@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Target description is not currently implemented in RISC-V
architecture. Thus GDB won't set it properly when attached.
The patch implements the target description response.
Signed-off-by: Sylvain Pelissier <sylvain.pelissier@gmail.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210106204141.14027-1-sylvain.pelissier@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vendor specific CPU definitions are not very useful. Use the
ISA definitions instead, which are more helpful when looking
at the various CPU definitions.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210112210152.2072996-4-f4bug@amsat.org>
nanoMIPS not a CPU, but an ISA. The nanoMIPS ISA is already
defined as ISA_NANOMIPS32.
Remove this incorrect definition and update the single CPU
implementing it, the I7200.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210112210152.2072996-3-f4bug@amsat.org>
Commit 823f2897bd ("target/mips: Disable R5900 support")
removed the single CPU using the CPU_R5900 definition.
As it is unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210112210152.2072996-2-f4bug@amsat.org>
LL/SC opcodes have been removed from the Release 6.
Add a single decodetree entry for the opcodes, triggering
Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-14-f4bug@amsat.org>
LLD/SCD opcodes have been removed from the Release 6.
Add a single decodetree entry for the opcodes, triggering
Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-13-f4bug@amsat.org>
LDL/LDR/SDL/SDR opcodes have been removed from the Release 6.
Add a single decodetree entry for the opcodes, triggering
Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-12-f4bug@amsat.org>
LWLE/LWRE/SWLE/SWRE (EVA) opcodes have been removed from
the Release 6. Add a single decodetree entry for the opcodes,
triggering Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-11-f4bug@amsat.org>
LWL/LWR/SWL/SWR opcodes have been removed from the Release 6.
Add a single decodetree entry for the opcodes, triggering
Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-10-f4bug@amsat.org>
CACHE/PREF opcodes have been removed from the Release 6.
Add a single decodetree entry for the opcodes, triggering
Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-9-f4bug@amsat.org>
COP1x opcode has been removed from the Release 6.
Add a single decodetree entry for it, triggering
Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() call.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-8-f4bug@amsat.org>
Special2 opcode have been removed from the Release 6.
Add a single decodetree entry for all the opcode class,
triggering Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() call.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-7-f4bug@amsat.org>
Since we switched to decodetree-generated processing,
we can remove this now unreachable code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-6-f4bug@amsat.org>
LSA and LDSA opcodes are also available with MIPS release 6.
Introduce the decodetree config files and call the decode()
helpers in the main decode_opc() loop.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-24-f4bug@amsat.org>
Add the LSA opcode to the MSA32 decodetree config, add DLSA
to a new config for the MSA64 ASE, and call decode_msa64()
in the main decode_opc() loop.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-23-f4bug@amsat.org>
Extract gen_lsa() from translate.c and explode it as
gen_LSA() and gen_DLSA().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-22-f4bug@amsat.org>
Now that we can decode the MSA ASE with decode_ase_msa(),
use it and remove the previous code, now unreachable.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-21-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Introduce the 'msa32' decodetree config for the 32-bit MSA ASE.
We start by decoding:
- the branch instructions,
- all instructions based on the MSA opcode.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-20-f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Simplify gen_check_zero_element() by passing the TCGCond
argument along.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-25-f4bug@amsat.org>
Extract 2200 lines from the huge translate.c to a new file,
'msa_translate.c'. As there are too many inter-dependencies
we don't compile it as another object yet, but keep including
it in the big translate.o. We gain in code maintainability.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-5-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Make gen_msa() and gen_msa_branch() public declarations
so we can keep calling them once extracted from the big
translate.c in the next commit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-18-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Keep all MSA-related code altogether.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201120210844.2625602-4-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
We have ~400 lines of MSA helpers in the generic op_helper.c,
move them with the other helpers in 'msa_helper.c'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201123204448.3260804-5-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
translate_init.c.inc mostly contains CPU definitions.
msa_reset() doesn't belong here, move it with the MSA
helpers.
One comment style is updated to avoid checkpatch.pl warning.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-15-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
In preparation of using the decodetree script, explode
gen_msa_branch() as following:
- OPC_BZ_V -> BxZ_V(EQ)
- OPC_BNZ_V -> BxZ_V(NE)
- OPC_BZ_[BHWD] -> BxZ(false)
- OPC_BNZ_[BHWD] -> BxZ(true)
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-10-f4bug@amsat.org>
The gen_msa*() methods don't use the "CPUMIPSState *env"
argument. Remove it to simplify.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-9-f4bug@amsat.org>
The msa_wr_d[] registers are only initialized/used by MSA.
They are declared static. We want to move them to the new
'msa_translate.c' unit in few commits, without having to
declare them global (with extern).
Extract first the logic initialization of the MSA registers
from the generic initialization. We will later move this
function along with the MSA registers to the new C unit.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-8-f4bug@amsat.org>
Commits 863f264d10 ("add msa_reset(), global msa register") and
cb269f273f ("fix multiple TCG registers covering same data")
removed the FPU scalar registers and replaced them by aliases to
the MSA vector registers.
It is not very clear to have FPU registers displayed with MSA
register names, even if MSA ASE is not present.
Instead of aliasing FPU registers to the MSA ones (even when MSA
is absent), we now alias the MSA ones to the FPU ones (only when
MSA is present).
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-7-f4bug@amsat.org>
We don't use ASE_MSA anymore (replaced by ase_msa_available()
checking MSAP bit from CP0_Config3). Remove it.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-6-f4bug@amsat.org>
Only decode MSA opcodes if MSA is present (implemented).
Now than check_msa_access() will only be called if MSA is
present, the only way to have MIPS_HFLAG_MSA unset is if
MSA is disabled (bit CP0C5_MSAEn cleared, see previous
commit). Therefore we can remove the 'reserved instruction'
exception.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-5-f4bug@amsat.org>
MSA presence is expressed by the MSAP bit of CP0_Config3.
We don't need to check anything else.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-4-f4bug@amsat.org>
Call msa_reset() unconditionally, but only reset
the MSA registers if MSA is implemented.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-3-f4bug@amsat.org>
Instead of accessing CP0_Config3 directly and checking
the 'MSA Present' bit, introduce an explicit helper,
making the code easier to read.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-2-f4bug@amsat.org>
To allow compiling 64-bit specific translation code more
generically (and removing #ifdef'ry), allow compiling
check_mips_64() on 32-bit targets.
If ever called on 32-bit, we obviously emit a reserved
instruction exception.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201215225757.764263-3-f4bug@amsat.org>
As we will slowly move to decodetree generated decoders,
extract the legacy decoding from decode_opc(), so new
decoders are added in decode_opc() while old code is
removed from decode_opc_legacy().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-20-f4bug@amsat.org>
Extract FPU specific definitions that can be used by
ISA / ASE / extensions to translate.h header.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-16-f4bug@amsat.org>
Some FPU / Coprocessor translation functions / registers can be
used by ISA / ASE / extensions out of the big translate.c file.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-15-f4bug@amsat.org>
gen_reserved_instruction() is easier to read than
generate_exception_end(ctx, EXCP_RI), replace it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-12-f4bug@amsat.org>
generate_exception_err(err=0) is simply generate_exception_end().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-11-f4bug@amsat.org>
Some CPU translation functions / registers / macros and
definitions can be used by ISA / ASE / extensions out of
the big translate.c file. Declare them in "translate.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201207235539.4070364-3-f4bug@amsat.org>
Extract DisasContext to a new 'translate.h' header so
different translation files (ISA, ASE, extensions)
can use it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201207235539.4070364-2-f4bug@amsat.org>
This file is not TCG specific, contains CPU definitions
and is consumed by cpu.c. Rename it as such.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-10-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-15-f4bug@amsat.org>
We are going to move this code, fix its style first.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-14-f4bug@amsat.org>
This file contains functions related to TLB management,
rename it as 'tlb_helper.c'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-13-f4bug@amsat.org>
The rest of helper.c is TLB related. Extract the non TLB
specific functions to cpu.c, so we can rename helper.c as
tlb_helper.c in the next commit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-5-f4bug@amsat.org>
To help understand ifdef'ry, add comment after #endif.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-4-f4bug@amsat.org>
Extract FPU specific helpers from "internal.h" to "fpu_helper.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201120210844.2625602-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-2-f4bug@amsat.org>
The MIPS ISA release 6 is common to 32/64-bit CPUs.
To avoid holes in the insn_flags type, update the
definition with the next available bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-16-f4bug@amsat.org>
The MIPS ISA release 5 is common to 32/64-bit CPUs.
To avoid holes in the insn_flags type, update the
definition with the next available bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-15-f4bug@amsat.org>
The MIPS ISA release 3 is common to 32/64-bit CPUs.
To avoid holes in the insn_flags type, update the
definition with the next available bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-14-f4bug@amsat.org>
The MIPS ISA release 2 is common to 32/64-bit CPUs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-13-f4bug@amsat.org>
The MIPS ISA release '1' is common to 32/64-bit CPUs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-12-f4bug@amsat.org>
Use the single ISA_MIPS32R6 definition to check if the Release 6
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R6 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-11-f4bug@amsat.org>
Use the single ISA_MIPS32R5 definition to check if the Release 5
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R5 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-10-f4bug@amsat.org>
Use the single ISA_MIPS32R3 definition to check if the Release 3
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R3 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-9-f4bug@amsat.org>
Use the single ISA_MIPS32R2 definition to check if the Release 2
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R2 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-8-f4bug@amsat.org>
Use the single ISA_MIPS32 definition to check if the Release 1
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R1 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-7-f4bug@amsat.org>
MIPS 64-bit ISA is introduced with MIPS3.
Introduce the CPU_MIPS64 definition aliased to the MIPS3 ISA,
and the cpu_type_is_64bit() method to check if a CPU supports
this ISA (thus is 64-bit).
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210104221154.3127610-5-f4bug@amsat.org>
'CPU_MIPS32' and 'CPU_MIPS64' definitions concern CPUs implementing
the "Release 1" ISA. Rename it with the 'R1' suffix, as the other
CPU definitions do.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210104221154.3127610-4-f4bug@amsat.org>
Move CPU_MIPS5 after CPU_MIPS4 :)
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-3-f4bug@amsat.org>
Remove a comment added 12 years ago but never used (commit
b6d96beda3: "Use temporary registers for the MIPS FPU emulation").
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210104221154.3127610-2-f4bug@amsat.org>
It's useful for bootloader to do I/O operations.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Message-Id: <20201215064507.30148-3-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201201132817.2863301-3-f4bug@amsat.org>
The MIPS3 and MIPS32/64 ISA use different definitions
for the CP0 Config0 register.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201201132817.2863301-2-f4bug@amsat.org>
In commit cd8be50e58 we converted the A32 coprocessor
insns to decodetree. This accidentally broke XScale/iWMMXt insns,
because it moved the handling of "cp insns which are handled
by looking up the cp register in the hashtable" from after the
call to the legacy disas_xscale_insn() decode to before it,
with the result that all XScale/iWMMXt insns now UNDEF.
Update valid_cp() so that it knows that on XScale cp 0 and 1
are not standard coprocessor instructions; this will cause
the decodetree trans_ functions to ignore them, so that
execution will correctly get through to the legacy decode again.
Cc: qemu-stable@nongnu.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20210108195157.32067-1-peter.maydell@linaro.org
Use the dedicated X86Seg enum type for segment registers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210109233427.749748-1-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This struct only used in whpx-apic.c, there is no need
expose it in whpx.h.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20210107101919.80-6-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only leave the external interface in sysemu/whpx.h. whpx_apic_in_platform
is moved to a .c file because it needs whpx_state.
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201219090637.1700900-3-pbonzini@redhat.com>
Rename the file in preparation for moving more implementation-internal
definitions to it. The build is still broken though.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201219090637.1700900-2-pbonzini@redhat.com>
When FEAT_MTE is implemented, the AArch64 view of CTR_EL0 adds the
TminLine field in bits [37:32].
Extend the ctr field to be able to hold this context.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-4-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AArch64 view of CLIDR_EL1 extends the ICB field to include also bit
32, as well as adding a Ttype<n> field when FEAT_MTE is implemented.
Extend the clidr field to be able to hold this context.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-3-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds for the Small Translation tables extension in AArch64 state.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Arm CPU finalize function uses a sequence of timer_del(), timer_deinit(),
timer_free() to free the timer. The timer_deinit() step in this was always
unnecessary, and now the timer_del() is implied by timer_free(), so we can
collapse this down to simply calling timer_free().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-5-peter.maydell@linaro.org
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
Now that we have implemented all the features needed by the v8.1M
architecture, we can add the model of the Cortex-M55. This is the
configuration without MVE support; we'll add MVE later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201210201433.26262-5-peter.maydell@linaro.org
Implement the v8.1M FPCXT_NS floating-point system register. This is
a little more complicated than FPCXT_S, because it has specific
handling for "current FP state is inactive", and it only wants to do
PreserveFPState(), not the full set of actions done by
ExecuteFPCheck() which vfp_access_check() implements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201210201433.26262-4-peter.maydell@linaro.org
In commit 64f863baee we implemented the v8.1M FPCXT_S register,
but we got the write behaviour wrong. On read, this register reads
bits [27:0] of FPSCR plus the CONTROL.SFPA bit. On write, it doesn't
just write back those bits -- it writes a value to the whole FPSCR,
whose upper 4 bits are zeroes.
We also incorrectly implemented the write-to-FPSCR as a simple store
to vfp.xregs; this skips the "update the softfloat flags" part of
the vfp_set_fpscr helper so the value would read back correctly but
not actually take effect.
Fix both of these things by doing a complete write to the FPSCR
using the helper function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201210201433.26262-3-peter.maydell@linaro.org
In 50244cc76a we updated mte_check_fail to match the ARM
pseudocode, using the correct EL to select the TCF field.
But we failed to update MTE0_ACTIVE the same way, which led
to g_assert_not_reached().
Cc: qemu-stable@nongnu.org
Buglink: https://bugs.launchpad.net/bugs/1907137
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201221204426.88514-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is nothing within the translators that ought to be
changing the TranslationBlock data, so make it const.
This does not actually use the read-only copy of the
data structure that exists within the rx region.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing within the translators that ought to be
changing the TranslationBlock data, so make it const.
This does not actually use the read-only copy of the
data structure that exists within the rx region.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently the MIPS code uses the old clock_get_ns() API to
calculate a time length in nanoseconds:
cpu->cp0_count_rate * clock_get_ns(MIPS_CPU(cpu)->clock)
This relies on the clock having a period which is an exact number
of nanoseconds.
Switch to the new clock_ticks_to_ns() function, which does the
multiplication internally at a higher precision.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201215150929.30311-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When the 'int N' instruction is executed in protected mode, the
pseudocode in the architecture manual specifies that we need to check:
* vector number within IDT limits
* selected IDT descriptor is a valid type (interrupt, trap or task gate)
* if this was a software interrupt then gate DPL < CPL
The way we had structured the code meant that the privilege check for
software interrupts ended up not in the code path taken for task gate
handling, because all of the task gate handling code was in the 'case 5'
of the switch which was checking "is this descriptor a valid type".
Move the task gate handling code out of that switch (so that it is now
purely doing the "valid type?" check) and below the software interrupt
privilege check.
The effect of this missing check was that in a guest userspace binary
executing 'int 8' would cause a guest kernel panic rather than the
userspace binary being handed a SEGV.
This is essentially the same bug fixed in VirtualBox in 2012:
https://www.halfdog.net/Security/2012/VirtualBoxSoftwareInterrupt0x8GuestCrash/
Note that for QEMU this is not a security issue because it is only
present when using TCG.
Fixes: https://bugs.launchpad.net/qemu/+bug/1813201
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201121224445.16236-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
- enhance the s390 devices acceptance test
- tcg: improve carry computation
- qga: send the ccw address with the fsinfo data
- fixes for protected virtualisation and zpci
-----BEGIN PGP SIGNATURE-----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=X/jY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20201222' into staging
Further s390x updates:
- enhance the s390 devices acceptance test
- tcg: improve carry computation
- qga: send the ccw address with the fsinfo data
- fixes for protected virtualisation and zpci
# gpg: Signature made Tue 22 Dec 2020 10:37:34 GMT
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20201222:
tests/acceptance: Add a test with the Fedora 31 kernel and initrd
s390x/pci: Fix memory_region_access_valid call
s390x/pci: fix pcistb length
tests/acceptance: Test the virtio-balloon device on s390x
tests/acceptance: Test virtio-rng on s390 via /dev/hwrng
tests/acceptance: Extract the code to clear dmesg and wait for CRW reports
tests/acceptance: test hot(un)plug of ccw devices
target/s390x: Improve SUB LOGICAL WITH BORROW
target/s390x: Improve cc computation for SUBTRACT LOGICAL
target/s390x: Improve ADD LOGICAL WITH CARRY
target/s390x: Improve cc computation for ADD LOGICAL
qga/commands-posix: Send CCW address on s390x with the fsinfo data
MAINTAINERS: move my git tree to gitlab
s390x: pv: Fence additional unavailable SCLP facilities for PV guests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=vGLy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging
QAPI patches patches for 2020-12-19
# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
qobject: Make QString immutable
block: Use GString instead of QString to build filenames
keyval: Use GString to accumulate value strings
json: Use GString instead of QString to accumulate strings
migration: Replace migration's JSON writer by the general one
qobject: Factor JSON writer out of qobject_to_json()
qobject: Factor quoted_str() out of to_json()
qobject: Drop qstring_get_try_str()
qobject: Drop qobject_get_try_str()
Revert "qobject: let object_property_get_str() use new API"
block: Avoid qobject_get_try_str()
qmp: Fix tracing of non-string command IDs
qobject: Move internals to qobject-internal.h
hw/rdma: Replace QList by GQueue
Revert "qstring: add qstring_free()"
qobject: Change qobject_to_json()'s value to GString
qobject: Use GString instead of QString to accumulate JSON
qobject: Make qobject_to_json_pretty() take a pretty argument
monitor: Use GString instead of QString for output buffer
hmp: Simplify how qmp_human_monitor_command() gets output
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that SUB LOGICAL outputs borrow, we can use that as input directly.
It also means we can re-use CC_OP_SUBU and produce an output borrow
directly from SUB LOGICAL WITH BORROW.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214221356.68039-5-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The resulting cc is only dependent on the result and the carry-out.
Carry-out and borrow-out are inverses, so are trivially converted.
With tcg ops, it is easier to compute borrow-out than carry-out, so
save result and borrow-out rather than the inputs.
Borrow-out for 64-bit inputs is had via tcg_gen_sub2_i64 directly
into cc_src. Borrow-out for 32-bit inputs is had via extraction
from a normal 64-bit sub (with zero-extended inputs).
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214221356.68039-4-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that ADD LOGICAL outputs carry, we can use that as input directly.
It also means we can re-use CC_OP_ADDU and produce an output carry
directly from ADD LOGICAL WITH CARRY.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214221356.68039-3-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The resulting cc is only dependent on the result and the
carry-out. So save those things rather than the inputs.
Carry-out for 64-bit inputs is had via tcg_gen_add2_i64 directly
into cc_src. Carry-out for 32-bit inputs is had via extraction
from a normal 64-bit add (with zero-extended inputs).
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214221356.68039-2-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There's no VSIE support for a protected guest, so let's better not
advertise it and its support facilities.
Fixes: c3347ed0d2 ("s390x: protvirt: Support unpack facility")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201211105109.2913-1-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert. Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer". It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().
The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Every single qdev property setter function manually checks
dev->realized. We can just check dev->realized inside
qdev_property_set() instead.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20201211220529.2290218-24-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use the DEFINE_PROP macro (which will set extra fields in the
struct) instead of initializing a Property struct manually.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201211220529.2290218-18-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Correctly implement save/restore of the tstate field in
sparc64_get_context() and sparc64_set_context():
* Don't use the CWP value from the guest in set_context
* Construct and save a tstate value rather than leaving
it as zero in get_context
To do this we factor out the "calculate TSTATE value from CPU state"
code from sparc_cpu_do_interrupt() into its own sparc64_tstate()
function; that in turn requires us to move some of the function
prototypes out from inside a CPU_NO_IO_DEFS ifdef guard.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201106152738.26026-5-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The handling of the FPU state in sparc64_get_context() and
sparc64_set_context() is not the same as what the kernel actually
does: we unconditionally read and write the FP registers and the
FSR, GSR and FPRS, but the kernel logic is more complicated:
* in get_context the kernel has code for saving FPU registers,
but it is hidden inside an "if (fenab) condition and the
fenab flag is always set to 0 (inside an "#if 1" which has
been in the kernel for over 15 years). So the effect is that
the FPU state part is always written as zeroes.
* in set_context the kernel looks at the fenab field in the
structure from the guest, and only restores the state if
it is set; it also looks at the structure's FPRS to see
whether either the upper or lower or both halves of the
register file have valid data.
Bring our implementations into line with the kernel:
* in get_context:
- clear the entire target_ucontext at the top of the
function (as the kernel does)
- then don't write the FPU state, so those fields remain zero
- this fixes Coverity issue CID 1432305 by deleting the code
it was complaining about
* in set_context:
- check the fenab and the fpsr to decide which parts of
the FPU data to restore, if any
- instead of setting the FPU registers by doing two
32-bit loads and filling in the .upper and .lower parts
of the CPU_Double union separately, just do a 64-bit
load of the whole register at once. This fixes Coverity
issue CID 1432303 because we now access the dregs[] part
of the mcfpu_fregs union rather than the sregs[] part
(which is not large enough to actually cover the whole of
the data, so we were accessing off the end of sregs[])
We change both functions in a single commit to avoid potentially
breaking bisection.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201106152738.26026-2-peter.maydell@linaro.org>
[lv: fix FPRS_DU loop s/31/32/]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning:
target/sparc/win_helper.c: In function ‘get_gregset’:
target/sparc/win_helper.c:304:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
304 | trace_win_helper_gregset_error(pstate);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
target/sparc/win_helper.c:306:5: note: here
306 | case 0:
| ^~~~
Add the corresponding "fall through" comment to fix it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201211152426.350966-10-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning:
target/sparc/translate.c: In function ‘gen_st_asi’:
target/sparc/translate.c:2320:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
2320 | if (!(dc->def->features & CPU_FEATURE_HYPV)) {
| ^
target/sparc/translate.c:2329:5: note: here
2329 | case GET_ASI_DIRECT:
| ^~~~
The "fall through" statement place is not correctly identified by the compiler.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201211152426.350966-9-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The current "#ifdef TARGET_X86_64" statement affects
the compiler's determination of fall through.
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning:
target/i386/translate.c: In function ‘gen_shiftd_rm_T1’:
target/i386/translate.c:1773:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (is_right) {
^
target/i386/translate.c:1782:5: note: here
case MO_32:
^~~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201211152426.350966-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Looking at the way the code is formatted here (there is an empty line
after break statements, but none where the break is missing), and the
instruction set overview at https://en.wikipedia.org/wiki/Unicore the
fallthrough is very likely intended here. So add a fallthrough comment
to make the it compilable with -Werror=implicit-fallthrough.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201211152426.350966-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The TW and TSR fields should be bits 21 and 22 and not 30/29.
This was found while comparing QEMU behaviour against the sail formal
model (https://github.com/rems-project/sail-riscv/).
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201130170117.71281-1-Alexander.Richardson@cl.cam.ac.uk
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We found that the hypervisor virtual-machine load and store instructions,
included HLVX/HLV/HSV, couldn't access guest userspace memory.
In the riscv-privileged spec, HLVX/HLV/HSV is defined as follow:
"As usual when V=1, two-stage address translation is applied, and
the HS-level sstatus.SUM is ignored."
But get_physical_address() doesn't ignore sstatus.SUM, when HLVX/HLV/HSV
accesses guest userspace memory. So this patch fixes it.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201130012810.899-1-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
ISA features are usually denoted in read-only bits from
CPU registers. Add the GET_FEATURE_REG_EQU() macro which
checks if a CPU register has bits set to a specific value.
Use the macro to check the 'Architecture Revision' level
of the Config0 register, which is '2' when the Release 6
ISA is implemented.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201214003215.344522-5-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
make it a regular function.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201212155530.23098-9-cfontana@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
to do this, we need to take code out of cpu.c and helper.c,
and also move some prototypes from cpu.h, for code that is
needed in tcg/xxx_helper.c, and which in turn is part of the
callbacks registered by the class initialization.
Therefore, do some shuffling of the parts of cpu.h that
are only relevant for tcg/, and put them in tcg/helper-tcg.h
For FT0 and similar macros, put them in tcg/fpu-helper.c
since they are used only there.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201212155530.23098-8-cfontana@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
AVX512 Half-precision floating point (FP16) has better performance
compared to FP32 if the presicion or magnitude requirements are met.
It's defined as CPUID.(EAX=7,ECX=0):EDX[bit 23].
Refer to
https://software.intel.com/content/www/us/en/develop/download/\
intel-architecture-instruction-set-extensions-programming-reference.html
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Message-Id: <20201216224002.32677-1-cathy.zhang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As a preparation to expanding Hyper-V CPU features early, move
hyperv_limits initialization to x86_cpu_realizefn().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201119103221.1665171-5-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As a preparation to expanding Hyper-V CPU features early, move
hyperv_version_id initialization to x86_cpu_realizefn().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201119103221.1665171-4-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As a preparation to expanding Hyper-V CPU features early, move
hyperv_interface_id initialization to x86_cpu_realizefn().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201119103221.1665171-3-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As a preparation to expanding Hyper-V CPU features early, move
hyperv_vendor_id initialization to x86_cpu_realizefn(). Introduce
x86_cpu_hyperv_realize() to not not pollute x86_cpu_realizefn()
itself.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201119103221.1665171-2-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* gdbstub: Correct misparsing of vCont C/S requests
* openrisc: Move pic_cpu code into CPU object proper
* nios2: Move IIC code into CPU object proper
* Improve reporting of ROM overlap errors
* xlnx-versal: Add USB support
* hw/misc/zynq_slcr: Avoid #DIV/0! error
* Numonyx: Fix dummy cycles and check for SPI mode on cmds
-----BEGIN PGP SIGNATURE-----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=lHZA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201215' into staging
target-arm queue:
* gdbstub: Correct misparsing of vCont C/S requests
* openrisc: Move pic_cpu code into CPU object proper
* nios2: Move IIC code into CPU object proper
* Improve reporting of ROM overlap errors
* xlnx-versal: Add USB support
* hw/misc/zynq_slcr: Avoid #DIV/0! error
* Numonyx: Fix dummy cycles and check for SPI mode on cmds
# gpg: Signature made Tue 15 Dec 2020 13:59:46 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20201215:
hw/block/m25p80: Fix Numonyx fast read dummy cycle count
hw/block/m25p80: Check SPI mode before running some Numonyx commands
hw/block/m25p80: Fix when VCFG XIP bit is set for Numonyx
hw/block/m25p80: Make Numonyx config field names more accurate
hw/misc/zynq_slcr: Avoid #DIV/0! error
arm: xlnx-versal: Connect usb to virt-versal
usb: xlnx-usb-subsystem: Add xilinx usb subsystem
usb: Add DWC3 model
usb: Add versal-usb2-ctrl-regs module
elf_ops.h: Be more verbose with ROM blob names
elf_ops.h: Don't truncate name of the ROM blobs we create
hw/core/loader.c: Improve reporting of ROM overlap errors
hw/core/loader.c: Track last-seen ROM in rom_check_and_register_reset()
target/nios2: Use deposit32() to update ipending register
target/nios2: Move nios2_check_interrupts() into target/nios2
target/nios2: Move IIC code into CPU object proper
target/openrisc: Move pic_cpu code into CPU object proper
hw/openrisc/openrisc_sim: Abstract out "get IRQ x of CPU y"
hw/openrisc/openrisc_sim: Use IRQ splitter when connecting IRQ to multiple CPUs
gdbstub: Correct misparsing of vCont C/S requests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sparc_set_nwindows() is one of the very few property setters that
don't check dev->realized, and there's no reason for it to be
special. Check dev->realized like the other setters.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201211220529.2290218-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201111183823.283752-8-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.
Also, the hundreds of instance properties were having an impact
on QMP commands that create temporary CPU objects. On my
machine, run time of qmp_query_cpu_definitions() changed
from ~200ms to ~16ms after applying this patch.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201111183823.283752-5-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In nios2_cpu_set_irq(), use deposit32() rather than raw shift-and-mask
operations to set the appropriate bit in the ipending register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201129174022.26530-4-peter.maydell@linaro.org
The function nios2_check_interrupts)() looks only at CPU-internal
state; it belongs in target/nios2, not hw/nios2. Move it into the
same file as its only caller, so it can just be local to that file.
This removes the only remaining code from cpu_pic.c, so we can delete
that file entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201129174022.26530-3-peter.maydell@linaro.org
Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Wentong Wu <wentong.wu@intel.com>
The Nios2 architecture supports two different interrupt controller
options:
* The IIC (Internal Interrupt Controller) is part of the CPU itself;
it has 32 IRQ input lines and no NMI support. Interrupt status is
queried and controlled via the CPU's ipending and istatus
registers.
* The EIC (External Interrupt Controller) interface allows the CPU
to connect to an external interrupt controller. The interface
allows the interrupt controller to present a packet of information
containing:
- handler address
- interrupt level
- register set
- NMI mode
QEMU does not model an EIC currently. We do model the IIC, but its
implementation is split across code in hw/nios2/cpu_pic.c and
hw/intc/nios2_iic.c. The code in those two files has no state of its
own -- the IIC state is in the Nios2CPU state struct.
Because CPU objects now inherit (indirectly) from TYPE_DEVICE, they
can have GPIO input lines themselves, so we can implement the IIC
directly in the CPU object the same way that real hardware does.
Create named "IRQ" GPIO inputs to the Nios2 CPU object, and make the
only user of the IIC wire up directly to those instead.
Note that the old code had an "NMI" concept which was entirely unused
and also as far as I can see not architecturally correct, since only
the EIC has a concept of an NMI.
This fixes a Coverity-reported trivial memory leak of the IRQ array
allocated in nios2_cpu_pic_init().
Fixes: Coverity CID 1421916
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201129174022.26530-2-peter.maydell@linaro.org
Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Wentong Wu <wentong.wu@intel.com>
The openrisc code uses an old style of interrupt handling, where a
separate standalone set of qemu_irqs invoke a function
openrisc_pic_cpu_handler() which signals the interrupt to the CPU
proper by directly calling cpu_interrupt() and cpu_reset_interrupt().
Because CPU objects now inherit (indirectly) from TYPE_DEVICE, they
can have GPIO input lines themselves, and the neater modern way to
implement this is to simply have the CPU object itself provide the
input IRQ lines.
Create GPIO inputs to the OpenRISC CPU object, and make the only user
of cpu_openrisc_pic_init() wire up directly to those instead.
This allows us to delete the hw/openrisc/pic_cpu.c file entirely.
This fixes a trivial memory leak reported by Coverity of the IRQs
allocated in cpu_openrisc_pic_init().
Fixes: Coverity CID 1421934
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stafford Horne <shorne@gmail.com>
Message-id: 20201127225127.14770-4-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----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=aOV/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging
Pull request trivial-patches 20201214
# gpg: Signature made Mon 14 Dec 2020 15:52:07 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-6.0-pull-request:
configure / meson: Move check for linux/btrfs.h to meson.build
configure / meson: Move check for sys/kcov.h to meson.build
configure / meson: Move check for sys/signal.h to meson.build
configure / meson: Move check for drm.h to meson.build
configure / meson: Move check for pty.h to meson.build
configure: Remove the obsolete check for ifaddrs.h
blockdev: Fix a memleak in drive_backup_prepare()
block/file-posix: fix a possible undefined behavior
elf2dmp/pdb: Plug memleak in pdb_init_from_file
elf2dmp/qemu_elf: Plug memleak in QEMU_Elf_init
configure: Test if $make actually exists
ads7846: moves from the hw/display folder to the hw/input folder.
CODING_STYLE.rst: Be less strict about 80 character limit
fsdev: open brace '{' following struct go on the same line
hw/pci-host/pam: Replace magic number by PAM_REGIONS_COUNT definition
hw/xen: Don't use '#' flag of printf format
MAINTAINERS: update my email address
qemu-options.hx: Fix minor issues in icount documentation
target/i386: tracing: format length values as hex
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Callers don't really need to know how 64-bit MMU model enums are
computed. Hide this in a helper.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201209173536.1437351-3-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The ppc_tr_init_disas_context() function currently checks whether the
MMU is 64-bit by ANDing its model type with POWERPC_MMU_64B. This is
wrong : POWERPC_MMU_64B isn't a mask, it is the generic MMU model for
pre-PowerISA-2.03 64-bit CPUs (ie. PowerPC 970 in QEMU).
Use POWERPC_MMU_64 instead of POWERPC_MMU_64B. This should fix a
potential bug with some 32-bit CPUs for which 'need_access_type'
was mis-computed because (POWERPC_MMU_32B & POWERPC_MMU_64B)
happens to be equal to 1. The end result being a crash in
ppc_hash32_direct_store() because the access type isn't set:
cpu_abort(cs, "ERROR: instruction should not need "
"address translation\n");
This doesn't change anything for 'lazy_tlb_flush' since POWERPC_MMU_32B
is checked first.
Fixes: 5f2a625452 ("ppc: Don't set access_type on all load/stores on hash64")
Signed-off-by: Stephane Duverger <stephane.duverger@free.fr>
[groug: - extended patch to address another misuse of POWERPC_MMU_64B
- updated title and changelog accordingly]
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201209173536.1437351-2-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This property has been deprecated since QEMU 5.0 by commit 22062e54bb.
We only kept a legacy hack that internally converts "compat" into the
official "max-cpu-compat" property of the pseries machine type.
According to our deprecation policy, we could have removed it for QEMU 5.2
already. Do it now ; since ppc_cpu_parse_featurestr() now just calls the
generic parent_parse_features handler, drop it as well.
Users are supposed to use the "max-cpu-compat" property of the pseries
machine type instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201131103.897430-1-groug@kaod.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make the implementation match the lxvwsx one.
The code is now shorter smaller and potentially faster as the
translation will use the host SIMD capabilities if available.
No functional change.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Message-Id: <a463dea379da4cb3a22de49c678932f74fb15dd7.1604912739.git.thatlemon@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PowerISA reference states that the comparison operators update the
FPCC, CR and FPSCR and, if VE=1, jump to the exception handler.
Moving the exception-triggering code after the CC update sequence solves
the problem.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201112230130.65262-5-thatlemon@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since we always perform a comparison between the two operands avoid
checking for NaN unless the result states they're unordered.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201112230130.65262-4-thatlemon@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201112230130.65262-3-thatlemon@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to the PowerISA v3.1 reference, Table 68 "Actions for xscmpudp
- Part 1: Compare Unordered", whenever one of the two operands is a NaN
the SO bit is set while the other three bits are cleared.
Apply the same change to xscmpuqp.
The respective ordered counterparts are unaffected.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Message-Id: <20201112230130.65262-2-thatlemon@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning:
target/ppc/mmu_helper.c: In function ‘dump_mmu’:
target/ppc/mmu_helper.c:1351:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
1351 | if (ppc64_v3_radix(env_archcpu(env))) {
| ^
target/ppc/mmu_helper.c:1358:5: note: here
1358 | default:
| ^~~~~~~
Use "qemu_log_mask(LOG_UNIMP**)" instead of the TODO comment.
And add the break statement to fix it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20201116024810.2415819-8-kuhn.chenqun@huawei.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use the FloatRoundMode enum type introduced in commit 3dede407cc
("softfloat: Name rounding mode enum") instead of 'unsigned int'.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201123204448.3260804-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-4-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-17-f4bug@amsat.org>
Nothing TCG specific there, move to common cpu code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-16-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-10-f4bug@amsat.org>
Move cpu_supports*() and cpu_set_exception_base() from
translate.c to cpu.c.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-9-f4bug@amsat.org>
Do not initialize MT-related config registers if the MT ASE
is not present. As some functions access the 'mvp' structure,
we still zero-allocate it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201204222622.2743175-4-f4bug@amsat.org>
Instead of accessing CP0_Config3 directly and checking
the 'Multi-Threading Present' bit, introduce an helper
to simplify code review.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201204222622.2743175-3-f4bug@amsat.org>
mvp_init() doesn't require any CPU definition (beside the
information accessible via CPUMIPSState). Remove the unused
argument.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201204222622.2743175-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-3-f4bug@amsat.org>
Address translation is an architectural thing (not hardware
related). Move the helpers from hw/ to target/.
As physical address and KVM are specific to system mode
emulation, restrict this file to softmmu, so it doesn't
get compiled for user-mode emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-2-f4bug@amsat.org>
Introduce cpu_supports_isa() which takes a CPUMIPSState
argument, more useful at runtime when the CPU is created
(no need to call the extensive object_class_by_name()).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201207215257.4004222-3-f4bug@amsat.org>
As cpu_supports_isa() / cpu_supports_cps_smp() take a 'cpu_type'
name argument, rename them cpu_type_supports_FEAT().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201207215257.4004222-2-f4bug@amsat.org>
As of Release 6, MMU type 4 is assigned to "Dual Variable-Page-Size
and Fixed-Page-Size TLBs" and type 2 to "Block Address Translation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201201132817.2863301-4-f4bug@amsat.org>
The Loongson-3A4000 is a GS464V-based processor with MIPS MSA ASE:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg763059.html
Commit af868995e1 correctly set the 'MSA present' bit of Config3
register, but forgot to allow the MSA instructions decoding in
insn_flags, so executing them triggers a 'Reserved Instruction'.
Fix by adding the ASE_MSA mask to insn_flags.
Fixes: af868995e1 ("target/mips: Add Loongson-3 CPU definition")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <20201130102228.2395100-1-f4bug@amsat.org>
Currently MIPS exceptions are displayed as string in system-mode
emulation, but as number in user-mode.
Unify by extracting the current system-mode code as excp_name()
and use that in user-mode.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201119160536.1980329-1-f4bug@amsat.org>
Remove unused headers and add missing "qemu/log.h" since
qemu_log() is called.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-5-f4bug@amsat.org>
CP0 helpers are restricted to system-mode emulation.
Do not intent do build cp0_helper.c in user-mode (this
allows to simplify some #ifdef'ry).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <20201109090422.2445166-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-7-f4bug@amsat.org>
Three trace events had a literal "0x" prefix but the 'len' values were
formatted in decimal base. Keep the prefix and format the numbers as
hex, as is usually the case for length of memory regions.
Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201103100745.160409-1-dovmurik@linux.vnet.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This code must not be used outside of KVM. Abort if it is.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200429082916.10669-3-f4bug@amsat.org>
I found that there are many spelling errors in the comments of qemu/target/m68k.
I used spellcheck to check the spelling errors and found some errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daude<f4bug@amsat.org>
Reviewed-by: Laurent Vivier<laurent@vivier.eu>
Message-Id: <20201009064449.2336-9-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
They are unused since the target has been converted to TCG.
Fixes: e1f3808e03 ("Convert m68k target to TCG.")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201022203000.1922749-2-laurent@vivier.eu>
When running device-introspect-test, a memory leak occurred in the s390_cpu_initfn
function, this patch use timer_free() in the finalize function to fix it.
ASAN shows memory leak stack:
Direct leak of 3552 byte(s) in 74 object(s) allocated from:
#0 0xfffeb3d4e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
#1 0xfffeb36e6800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
#2 0xaaad51a8f9c4 in timer_new_full qemu/include/qemu/timer.h:523
#3 0xaaad51a8f9c4 in timer_new qemu/include/qemu/timer.h:544
#4 0xaaad51a8f9c4 in timer_new_ns qemu/include/qemu/timer.h:562
#5 0xaaad51a8f9c4 in s390_cpu_initfn qemu/target/s390x/cpu.c:304
#6 0xaaad51e00f58 in object_init_with_type qemu/qom/object.c:371
#7 0xaaad51e0406c in object_initialize_with_type qemu/qom/object.c:515
#8 0xaaad51e042e0 in object_new_with_type qemu/qom/object.c:729
#9 0xaaad51e3ff40 in qmp_device_list_properties qemu/qom/qom-qmp-cmds.c:153
#10 0xaaad51910518 in qdev_device_help qemu/softmmu/qdev-monitor.c:283
#11 0xaaad51911918 in qmp_device_add qemu/softmmu/qdev-monitor.c:801
#12 0xaaad51911e48 in hmp_device_add qemu/softmmu/qdev-monitor.c:916
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201204081209.360524-4-ganqixin@huawei.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The current implementation will disable the guest Intel PT feature
if the Intel PT LIP feature is supported on the host, but the LIP
feature is comming soon(e.g. SnowRidge and later).
This patch will make the guest LIP feature configurable and Intel
PT feature can be enabled in guest when the guest LIP status same
with the host.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <20201202101042.11967-1-luwei.kang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
AMD SEV allows a guest owner to inject a secret blob
into the memory of a virtual machine. The secret is
encrypted with the SEV Transport Encryption Key and
integrity is guaranteed with the Transport Integrity
Key. Although QEMU facilitates the injection of the
launch secret, it cannot access the secret.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20201027170303.47550-1-tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use the machine properties instead.
Cc: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support the kernel-irqchip option for
WHPX with on or off value. 'split' value is not supported
for the option. The option only works for the latest version
of Windows (ones that are coming out on Insiders). The
change maintains backward compatibility on older version of
Windows where this option is not supported.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880B13258DA9251F8459F4DC0170@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per the SDM, when returning to outer privilege level, for segment
registers (ES, FS, GS, and DS) if the check fails, the segment
selector becomes null, but QEMU clears the base/limit/flags as well
as nullifying the segment selector, which should be a spec violation.
Real hardware seems to be compliant with the spec, at least on one
Coffee Lake board I tested.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <1605261378-77971-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The IOAPIC has an 'Extended Destination ID' field in its RTE, which maps
to bits 11-4 of the MSI address. Since those address bits fall within a
given 4KiB page they were historically non-trivial to use on real hardware.
The Intel IOMMU uses the lowest bit to indicate a remappable format MSI,
and then the remaining 7 bits are part of the index.
Where the remappable format bit isn't set, we can actually use the other
seven to allow external (IOAPIC and MSI) interrupts to reach up to 32768
CPUs instead of just the 255 permitted on bare metal.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <78097f9218300e63e751e077a0a5ca029b56ba46.camel@infradead.org>
[Fix UBSAN warning. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
For PDEP and PEXT, the mask is provided in the memory (mod+r/m)
operand, and therefore is loaded in s->T0 by gen_ldst_modrm.
The source is provided in the second source operand (VEX.vvvv)
and therefore is loaded in s->T1. Fix the order in which
they are passed to the helpers.
Reported-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Analyzed-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Fixes: https://bugs.launchpad.net/qemu/+bug/1605123
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For v8.1M the architecture mandates that CPUs must provide at
least the "minimal RAS implementation" from the Reliability,
Availability and Serviceability extension. This consists of:
* an ESB instruction which is a NOP
-- since it is in the HINT space we need only add a comment
* an RFSR register which will RAZ/WI
* a RAZ/WI AIRCR.IESB bit
-- the code which handles writes to AIRCR does not allow setting
of RES0 bits, so we already treat this as RAZ/WI; add a comment
noting that this is deliberate
* minimal implementation of the RAS register block at 0xe0005000
-- this will be in a subsequent commit
* setting the ID_PFR0.RAS field to 0b0010
-- we will do this when we add the Cortex-M55 CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-26-peter.maydell@linaro.org
v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
Add the code in the SG insn implementation for the new behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-24-peter.maydell@linaro.org
v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
This bit is not banked, and is always RAZ/WI to Non-secure code.
Adjust the code for handling CCR reads and writes to handle this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-23-peter.maydell@linaro.org
v8.1M adds new encodings of VLLDM and VLSTM (where bit 7 is set).
The only difference is that:
* the old T1 encodings UNDEF if the implementation implements 32
Dregs (this is currently architecturally impossible for M-profile)
* the new T2 encodings have the implementation-defined option to
read from memory (discarding the data) or write UNKNOWN values to
memory for the stack slots that would be D16-D31
We choose not to make those accesses, so for us the two
instructions behave identically assuming they don't UNDEF.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-21-peter.maydell@linaro.org
In v8.1M a new exception return check is added which may cause a NOCP
UsageFault (see rule R_XLTP): before we clear s0..s15 and the FPSCR
we must check whether access to CP10 from the Security state of the
returning exception is disabled; if it is then we must take a fault.
(Note that for our implementation CPPWR is always RAZ/WI and so can
never cause CP10 accesses to fail.)
The other v8.1M change to this register-clearing code is that if MVE
is implemented VPR must also be cleared, so add a TODO comment to
that effect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-20-peter.maydell@linaro.org
In v8.1M, vector table fetch failures don't set HFSR.FORCED (see rule
R_LLRP). (In previous versions of the architecture this was either
required or IMPDEF.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-18-peter.maydell@linaro.org
In v8.0M, on exception entry the registers R0-R3, R12, APSR and EPSR
are zeroed for an exception taken to Non-secure state; for an
exception taken to Secure state they become UNKNOWN, and we chose to
leave them at their previous values.
In v8.1M the behaviour is specified more tightly and these registers
are always zeroed regardless of the security state that the exception
targets (see rule R_KPZV). Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-17-peter.maydell@linaro.org
The FPDSCR register has a similar layout to the FPSCR. In v8.1M it
gains new fields FZ16 (if half-precision floating point is supported)
and LTPSIZE (always reads as 4). Update the reset value and the code
that handles writes to this register accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-16-peter.maydell@linaro.org
Implement the new-in-v8.1M FPCXT_S floating point system register.
This is for saving and restoring the secure floating point context,
and it reads and writes bits [27:0] from the FPSCR and the
CONTROL.SFPA bit in bit [31].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-14-peter.maydell@linaro.org
Factor out the code which handles M-profile lazy FP state preservation
from full_vfp_access_check(); accesses to the FPCXT_NS register are
a special case which need to do just this part (corresponding in the
pseudocode to the PreserveFPState() function), and not the full
set of actions matching the pseudocode ExecuteFPCheck() which
normal FP instructions need to do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201119215617.29887-13-peter.maydell@linaro.org
We defined a constant name for the mask of NZCV bits in the FPCR/FPSCR
in the previous commit; use it in a couple of places in existing code,
where we're masking out everything except NZCV for the "load to Rt=15
sets CPSR.NZCV" special case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-12-peter.maydell@linaro.org
v8.1M defines a new FP system register FPSCR_nzcvqc; this behaves
like the existing FPSCR, except that it reads and writes only bits
[31:27] of the FPSCR (the N, Z, C, V and QC flag bits). (Unlike the
FPSCR, the special case for Rt=15 of writing the CPSR.NZCV is not
permitted.)
Implement the register. Since we don't yet implement MVE, we handle
the QC bit as RES0, with todo comments for where we will need to add
support later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-11-peter.maydell@linaro.org
Implement the new-in-v8.1M VLDR/VSTR variants which directly
read or write FP system registers to memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-10-peter.maydell@linaro.org
The constant-expander functions like negate, plus_2, etc, are
generally useful; move them up in translate.c so we can use them in
the VFP/Neon decoders as well as in the A32/T32/T16 decoders.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-9-peter.maydell@linaro.org
Currently M-profile borrows the A-profile code for VMSR and VMRS
(access to the FP system registers), because all it needs to support
is the FPSCR. In v8.1M things become significantly more complicated
in two ways:
* there are several new FP system registers; some have side effects
on read, and one (FPCXT_NS) needs to avoid the usual
vfp_access_check() and the "only if FPU implemented" check
* all sysregs are now accessible both by VMRS/VMSR (which
reads/writes a general purpose register) and also by VLDR/VSTR
(which reads/writes them directly to memory)
Refactor the structure of how we handle VMSR/VMRS to cope with this:
* keep the M-profile code entirely separate from the A-profile code
* abstract out the "read or write the general purpose register" part
of the code into a loadfn or storefn function pointer, so we can
reuse it for VLDR/VSTR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-8-peter.maydell@linaro.org
For M-profile before v8.1M, the only valid register for VMSR/VMRS is
the FPSCR. We have a comment that states this, but the actual logic
to forbid accesses for any other register value is missing, so we
would end up with A-profile style behaviour. Add the missing check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-7-peter.maydell@linaro.org
In v8.1M the new CLRM instruction allows zeroing an arbitrary set of
the general-purpose registers and APSR. Implement this.
The encoding is a subset of the LDMIA T2 encoding, using what would
be Rn=0b1111 (which UNDEFs for LDMIA).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-6-peter.maydell@linaro.org
Implement the v8.1M VSCCLRM insn, which zeros floating point
registers if there is an active floating point context.
This requires support in write_neon_element32() for the MO_32
element size, so add it.
Because we want to use arm_gen_condlabel(), we need to move
the definition of that function up in translate.c so it is
before the #include of translate-vfp.c.inc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-5-peter.maydell@linaro.org
In arm_cpu_realizefn() we check whether the board code disabled EL3
via the has_el3 CPU object property, which we create if the CPU
starts with the ARM_FEATURE_EL3 feature bit. If it is disabled, then
we turn off ARM_FEATURE_EL3 and also zero out the relevant fields in
the ID_PFR1 and ID_AA64PFR0 registers.
This codepath was incorrectly being taken for M-profile CPUs, which
do not have an EL3 and don't set ARM_FEATURE_EL3, but which may have
the M-profile Security extension and so should have non-zero values
in the ID_PFR1.Security field.
Restrict the handling of the feature flag to A/R-profile cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-4-peter.maydell@linaro.org
In v8.1M the PXN architecture extension adds a new PXN bit to the
MPU_RLAR registers, which forbids execution of code in the region
from a privileged mode.
This is another feature which is just in the generic "in v8.1M" set
and has no ID register field indicating its presence.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-3-peter.maydell@linaro.org
Implement the "Load VSX Vector Word & Splat Indexed" opcode, introduced
in Power ISA v3.0.
Buglink: https://bugs.launchpad.net/qemu/+bug/1793608
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Message-Id: <d7d533e18c2bc10d924ee3e09907ff2b41fddb3a.1604912739.git.thatlemon@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The semihosting SYS_HEAPINFO call is supposed to return an array
of four guest addresses:
* base of heap memory
* limit of heap memory
* base of stack memory
* limit of stack memory
Some semihosting programs (including those compiled to use the
'newlib' embedded C library) use this call to work out where they
should initialize themselves to.
QEMU's implementation when in system emulation mode is very
simplistic: we say that the heap starts halfway into RAM and
continues to the end of RAM, and the stack starts at the top of RAM
and works down to the bottom. Unfortunately the code assumes that
the base address of RAM is at address 0, so on boards like 'virt'
where this is not true the addresses returned will all be wrong and
the guest application will usually crash.
Conveniently since all Arm boards call arm_load_kernel() we have the
base address of the main RAM block in the arm_boot_info struct which
is accessible via the CPU object. Use this to return sensible values
from SYS_HEAPINFO.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20201119092346.32356-1-peter.maydell@linaro.org
Using a target unsigned long would limit the Input Address to a LPAE
page-walk to 32 bits on AArch32 and 64 bits on AArch64. This is okay
for stage 1 or on AArch64, but it is insufficient for stage 2 on
AArch32. In that later case, the Input Address can have up to 40 bits.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201118150414.18360-1-remi@remlab.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Control Program Name Code (CPNC) portion of the diag318
info must be set within the SIE block of each VCPU in the
configuration. The handler will iterate through each VCPU
and dirty the diag318_info reg to be synced with KVM on a
subsequent sync_regs call.
Additionally, the diag318 info resets must be handled via
userspace. As such, QEMU will reset this value for each
VCPU during a modified clear, load normal, and load clear
reset event.
Fixes: fabdada935 ("s390: guest support for diagnose 0x318")
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <20201113221022.257054-1-walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Requested Privilege Level field is 2 bits, the Table Indicator field
is 1 bit and the Index field is the remaining 15 bits, with TI=0 meaning
GDT and TI=1 meaning LDT.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Message-Id: <20201116200414.28286-1-jrtc27@jrtc27.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Update NetBSD VM to version 9.1
* Misc fixes (e.g. categorize some devices)
-----BEGIN PGP SIGNATURE-----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=A3/B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-17' into staging
* Fixes for compiling on Haiku, and add Haiku VM for compile-testing
* Update NetBSD VM to version 9.1
* Misc fixes (e.g. categorize some devices)
# gpg: Signature made Tue 17 Nov 2020 09:20:31 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-11-17:
max111x: put it into the 'misc' category
nand: put it into the 'storage' category
ads7846: put it into the 'input' category
ssd0323: put it into the 'display' category
gitlab-ci: Use $CI_REGISTRY instead of hard-coding registry.gitlab.com
target/microblaze: Fix possible array out of bounds in mmu_write()
tests/vm: update NetBSD to 9.1
tests/vm: Add Haiku test based on their vagrant images
configure: Add a proper check for sys/ioccom.h and use it in tpm_ioctl.h
configure: Do not build pc-bios/optionrom on Haiku
configure: Fix the _BSD_SOURCE define for the Haiku build
qemu/bswap: Remove unused qemu_bswap_len()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the mtspr helper we attempt to check for "is the timer disabled"
with "if (env->ttmr & TIMER_NONE)". This is wrong because TIMER_NONE
is zero and the condition is always false (Coverity complains about
the dead code.)
The correct check would be to test whether the TTMR_M field in the
register is equal to TIMER_NONE instead. However, the
cpu_openrisc_timer_update() function checks whether the timer is
enabled (it looks at cpu->env.is_counting, which is set to 0 via
cpu_openrisc_count_stop() when the TTMR_M field is set to
TIMER_NONE), so there's no need to check for "timer disabled" in the
target/openrisc code. Instead, simply remove the dead code.
Fixes: Coverity CID 1005812
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Message-id: 20201103114654.18540-1-peter.maydell@linaro.org
The size of env->mmu.regs is 3, but the range of 'rn' is [0, 5].
To avoid data access out of bounds, only if 'rn' is less than 3, we
can print env->mmu.regs[rn]. In other cases, we can print
env->mmu.regs[MMU_R_TLBX].
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <5FA10ABA.1080109@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
g_strdup_printf is used twice to write to the same variable, which
can theoretically cause a leak. In practice, it is extremely
unlikely that a guest is seeing a recursive MCE and has disabled
CR4.MCE between the first and the second error, but we can fix it
and we can also make a slight improvement on the logic: CR4.MCE=0
causes a triple fault even for a non-recursive machine check, so
let's place its test first.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the nested state format is hardcoded to VMX. This will result
in kvm_put_nested_state() returning an error because the KVM SVM support
checks for the nested state to be KVM_STATE_NESTED_FORMAT_SVM. As a
result, kvm_arch_put_registers() errors out early.
Update the setting of the format based on the virtualization feature:
VMX - KVM_STATE_NESTED_FORMAT_VMX
SVM - KVM_STATE_NESTED_FORMAT_SVM
Also, fix the code formatting while at it.
Fixes: b16c0e20c7 ("KVM: add support for AMD nested live migration")
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <fe53d00fe0d884e812960781284cd48ae9206acc.1605546140.git.thomas.lendacky@amd.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124235.20130-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124012.20035-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023123353.19796-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122913.19561-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122801.19514-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122157.19321-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122051.19274-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023121821.19179-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023121649.19123-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201019061126.3102-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
mon_get_cpu_env() is indirectly called monitor_parse_arguments() where
the current monitor isn't set yet. Instead of using monitor_cur_env(),
explicitly pass the Monitor pointer to the function.
Without this fix, an HMP command like "x $pc" crashes like this:
#0 0x0000555555caa01f in mon_get_cpu_sync (mon=0x0, synchronize=true) at ../monitor/misc.c:270
#1 0x0000555555caa141 in mon_get_cpu (mon=0x0) at ../monitor/misc.c:294
#2 0x0000555555caa158 in mon_get_cpu_env () at ../monitor/misc.c:299
#3 0x0000555555b19739 in monitor_get_pc (mon=0x555556ad2de0, md=0x5555565d2d40 <monitor_defs+1152>, val=0) at ../target/i386/monitor.c:607
#4 0x0000555555cadbec in get_monitor_def (mon=0x555556ad2de0, pval=0x7fffffffc208, name=0x7fffffffc220 "pc") at ../monitor/misc.c:1681
#5 0x000055555582ec4f in expr_unary (mon=0x555556ad2de0) at ../monitor/hmp.c:387
#6 0x000055555582edbb in expr_prod (mon=0x555556ad2de0) at ../monitor/hmp.c:421
#7 0x000055555582ee79 in expr_logic (mon=0x555556ad2de0) at ../monitor/hmp.c:455
#8 0x000055555582eefe in expr_sum (mon=0x555556ad2de0) at ../monitor/hmp.c:484
#9 0x000055555582efe8 in get_expr (mon=0x555556ad2de0, pval=0x7fffffffc418, pp=0x7fffffffc408) at ../monitor/hmp.c:511
#10 0x000055555582fcd4 in monitor_parse_arguments (mon=0x555556ad2de0, endp=0x7fffffffc890, cmd=0x555556675b50 <hmp_cmds+7920>) at ../monitor/hmp.c:876
#11 0x00005555558306a8 in handle_hmp_command (mon=0x555556ad2de0, cmdline=0x555556ada452 "$pc") at ../monitor/hmp.c:1087
#12 0x000055555582df14 in monitor_command_cb (opaque=0x555556ad2de0, cmdline=0x555556ada450 "x $pc", readline_opaque=0x0) at ../monitor/hmp.c:47
After this fix, nothing is left in monitor_parse_arguments() that can
indirectly call monitor_cur(), so the fix is complete.
Fixes: ff04108a0e
Reported-by: lichun <lichun@ruijie.com.cn>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-4-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
All of these callbacks use mon_get_cpu_env(). Pass the Monitor
pointer to them it in preparation for adding a monitor argument to
mon_get_cpu_env().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-3-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
mon_get_cpu() is indirectly called monitor_parse_arguments() where
the current monitor isn't set yet. Instead of using monitor_cur(),
explicitly pass the Monitor pointer to the function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-2-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
* Oss-fuzz updates
* Publish the docs built during gitlab CI to the user's gitlab.io page
* Update the OpenBSD VM test to v6.8
* Fix the device-crash-test script to run with the meson build system
* Some small s390x fixes
-----BEGIN PGP SIGNATURE-----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=a3YE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-10' into staging
* Some small qtest fixes
* Oss-fuzz updates
* Publish the docs built during gitlab CI to the user's gitlab.io page
* Update the OpenBSD VM test to v6.8
* Fix the device-crash-test script to run with the meson build system
* Some small s390x fixes
# gpg: Signature made Tue 10 Nov 2020 11:05:06 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-11-10:
s390x: Avoid variable size warning in ipl.h
s390x: fix clang 11 warnings in cpu_models.c
qtest: Update references to parse_escape() in comments
fuzz: add virtio-blk fuzz target
docs: add "page source" link to sphinx documentation
gitlab: force enable docs build in Fedora, Ubuntu, Debian
gitlab: publish the docs built during CI
configure: surface deprecated targets in the help output
fuzz: Make fork_fuzz.ld compatible with LLVM's LLD
scripts/oss-fuzz: give all fuzzers -target names
docs/fuzz: update fuzzing documentation post-meson
docs/fuzz: rST-ify the fuzzing documentation
MAINTAINERS: Add gitlab-pipeline-status script to GitLab CI section
gitlab-ci: Drop generic cache rule
tests/qtest/tpm: Remove redundant check in the tpm_test_swtpm_test()
qtest: Fix bad printf format specifiers
device-crash-test: Check if path is actually an executable file
tests/vm: update openbsd to release 6.8
meson: always include contrib/libvhost-user
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Checks for UNDEF cases should go before the "is VFP enabled?" access
check, except in special cases. Move a stray UNDEF check in the VTBL
trans function up above the access check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201109145324.2859-1-peter.maydell@linaro.org
The helper function did not get updated when we reorganized
the vector register file for SVE. Since then, the neon dregs
are non-sequential and cannot be simply indexed.
At the same time, make the helper function operate on 64-bit
quantities so that we do not have to call it twice.
Fixes: c39c2b9043
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: use aa32_vfp_dreg() rather than opencoding]
Message-id: 20201105171126.88014-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix code style. Space required before the open parenthesis '('.
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Message-id: 20201103114529.638233-3-zhangxinhao1@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix code style. Don't use '#' flag of printf format ('%#') in
format strings, use '0x' prefix instead
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Message-id: 20201103114529.638233-2-zhangxinhao1@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ibex PLIC, the other fixes the Hypvervisor access functions.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl+qDs0ACgkQIeENKd+X
cFR/OwgAra3yNXMLZKHSsQt/fGeymv5gfWCbS3T4ncOLUcaC3IXEaf7udmWVhC4S
g9g6OhbO2jofRvSn0t0hZHAAnbTizKwesRXMQFfqAERn66Aa+yHmZYjsJrRHlwMf
MC3XBO5kgDISwvq7/CEI/RO8el2lEScuH9Mdc7cgDnoPpdX1Vy9Hl5RaDdqCHQck
XcqSnpjRkVQ8pKK6OhvDfD/Al5olKoHFR8k3gy+TrSpVsGDubGljOKUY/m7Ihs0m
ZVZMGbn+BISiFnqtoqb9O29ZxMPZv3tolmRPbT7d+4RqgK2cQ3WS63jXejii21ew
KCWv8CSWyGjMo5td+d6V6QXkPNifpg==
=75u0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20201109' into staging
This fixes two bugs in the RISC-V port. One is a bug in the
Ibex PLIC, the other fixes the Hypvervisor access functions.
# gpg: Signature made Tue 10 Nov 2020 03:53:49 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20201109:
hw/intc/ibex_plic: Clear the claim register when read
target/riscv: Split the Hypervisor execute load helpers
target/riscv: Remove the hyp load and store functions
target/riscv: Remove the HS_TWO_STAGE flag
target/riscv: Set the virtualised MMU mode when doing hyp accesses
target/riscv: Add a virtualised MMU Mode
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are void * pointers that get casted to enums, in cpu_models.c
Such casts can result in a small integer type and are caught as
warnings with clang, starting with version 11:
Clang 11 finds a bunch of spots in the code that trigger this new warnings:
../qemu-base/target/s390x/cpu_models.c:985:21: error: cast to smaller integer type 'S390Feat' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
S390Feat feat = (S390Feat) opaque;
^~~~~~~~~~~~~~~~~
../qemu-base/target/s390x/cpu_models.c:1002:21: error: cast to smaller integer type 'S390Feat' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
S390Feat feat = (S390Feat) opaque;
^~~~~~~~~~~~~~~~~
../qemu-base/target/s390x/cpu_models.c:1036:27: error: cast to smaller integer type 'S390FeatGroup' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
S390FeatGroup group = (S390FeatGroup) opaque;
^~~~~~~~~~~~~~~~~~~~~~
../qemu-base/target/s390x/cpu_models.c:1057:27: error: cast to smaller integer type 'S390FeatGroup' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
S390FeatGroup group = (S390FeatGroup) opaque;
^~~~~~~~~~~~~~~~~~~~~~
4 errors generated.
Avoid this warning by casting the pointer to uintptr_t first.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201105221905.1350-3-dbuono@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Split the hypervisor execute load functions into two seperate functions.
This avoids us having to pass the memop to the C helper functions.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 5b1550f0faa3c435cc77f3c1ae811dea98ab9e36.1604464950.git.alistair.francis@wdc.com
Remove the special Virtulisation load and store functions and just use
the standard tcg tcg_gen_qemu_ld_tl() and tcg_gen_qemu_st_tl() functions
instead.
As part of this change we ensure we still run an access check to make
sure we can perform the operations.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 189ac3e53ef2854824d18aad7074c6649f17de2c.1604464950.git.alistair.francis@wdc.com
The HS_TWO_STAGE flag is no longer required as the MMU index contains
the information if we are performing a two stage access.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: f514b128b1ff0fb41c85f914cee18f905007a922.1604464950.git.alistair.francis@wdc.com
When performing the hypervisor load/store operations set the MMU mode to
indicate that we are virtualised.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: e411c61a1452cad16853f13cac2fb86dc91ebee8.1604464950.git.alistair.francis@wdc.com
Our current code assumed the target page size is always 4k
when handling PageMask and VPN2, however, variable page size
was just added to mips target and that's no longer true.
Fixes: ee3863b9d4 ("target/mips: Support variable page size")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1604636510-8347-2-git-send-email-chenhc@lemote.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: Replaced find_first_zero_bit() by cto32()]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This patch adds some gen_io_start() calls to allow execution
of s390x targets in icount mode with -smp 1.
It enables deterministic timers and record/replay features.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <160455551747.32240.17074484658979970129.stgit@pasha-ThinkPad-X280>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning:
../target/ppc/excp_helper.c: In function ‘powerpc_excp’:
../target/ppc/excp_helper.c:529:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
529 | msr |= env->error_code;
| ~~~~^~~~~~~~~~~~~~~~~~
../target/ppc/excp_helper.c:530:5: note: here
530 | case POWERPC_EXCP_HDECR: /* Hypervisor decrementer exception */
| ^~~~
Add the corresponding "fall through" comment to fix it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20201028055107.2170401-1-kuhn.chenqun@huawei.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
MIPSR6 (not only MIPS32R6) processors support unaligned access in
hardware, so set MO_UNALN in their default_tcg_memop_mask. Btw, new
Loongson-3 (such as Loongson-3A4000) also support unaligned access,
since both old and new Loongson-3 use the same binaries, we can simply
set MO_UNALN for all Loongson-3 processors.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1604053541-27822-3-git-send-email-chenhc@lemote.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201016143509.26692-1-chetan4windows@gmail.com>
[PMD: Split hw/ vs target/]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix code style. Space required before the open parenthesis '('.
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Reported-by: Euler Robot <euler.robot@huawei.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201030004815.4172849-1-zhangxinhao1@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In the case of supporting V extension, add V extension description
to vmstate_riscv_cpu.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201026115530.304-6-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In the case of supporting H extension, add H extension description
to vmstate_riscv_cpu.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201026115530.304-5-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In the case of supporting PMP feature, add PMP state description
to vmstate_riscv_cpu.
'vmstate_pmp_addr' and 'num_rules' could be regenerated by
pmp_update_rule(). But there exists the problem of updating
num_rules repeatedly in pmp_update_rule(). So here extracts
pmp_update_rule_addr() and pmp_update_rule_nums() to update
'vmstate_pmp_addr' and 'num_rules' respectively.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201026115530.304-4-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add basic CPU state description to the newly created machine.c
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201026115530.304-3-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
mstatus/mstatush and vsstatus/vsstatush are two halved for RISCV32.
This patch expands mstatus and vsstatus to uint64_t instead of
target_ulong so that it can be saved as one unit and reduce some
ifdefs in the code.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201026115530.304-2-jiangyifei@huawei.com
In arm_v7m_mmu_idx_for_secstate() we get the 'priv' level to pass to
armv7m_mmu_idx_for_secstate_and_priv() by calling arm_current_el().
This is incorrect when the security state being queried is not the
current one, because arm_current_el() uses the current security state
to determine which of the banked CONTROL.nPRIV bits to look at.
The effect was that if (for instance) Secure state was in privileged
mode but Non-Secure was not then we would return the wrong MMU index.
The only places where we are using this function in a way that could
trigger this bug are for the stack loads during a v8M function-return
and for the instruction fetch of a v8M SG insn.
Fix the bug by expanding out the M-profile version of the
arm_current_el() logic inline so it can use the passed in secstate
rather than env->v7m.secure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201022164408.13214-1-peter.maydell@linaro.org
Secure mode is not exempted from checking SCR_EL3.TLOR, and in the
future HCR_EL2.TLOR when S-EL2 is enabled.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
HCR should be applied when NS is set, not when it is cleared.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The helper functions for performing the udot/sdot operations against
a scalar were not using an address-swizzling macro when converting
the index of the scalar element into a pointer into the vm array.
This had no effect on little-endian hosts but meant we generated
incorrect results on big-endian hosts.
For these insns, the index is indexing over group of 4 8-bit values,
so 32 bits per indexed entity, and H4() is therefore what we want.
(For Neon the only possible input indexes are 0 and 1.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201028191712.4910-3-peter.maydell@linaro.org
In the neon_padd/pmax/pmin helpers for float16, a cut-and-paste error
meant we were using the H4() address swizzler macro rather than the
H2() which is required for 2-byte data. This had no effect on
little-endian hosts but meant we put the result data into the
destination Dreg in the wrong order on big-endian hosts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201028191712.4910-2-peter.maydell@linaro.org
We can use proper widening loads to extend 32-bit inputs,
and skip the "widenfn" step.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In both cases, we can sink the write-back and perform
the accumulate into the normal destination temps.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only uses of this function are for loading VFP
double-precision values, and nothing to do with NEON.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
