In cases where we know the surface bounding box doesn't change in the
next frame, we can limit redraws to only the outputs the surface is
currently on. We could do even better by forcing the transform
update so we know where the surface will be in the next frame, but
this is a much simpler first step.
When the entire output is transformed or we're capturing the output
for screenshot or video, disable all output specific overlays
(drm planes, hw cursors etc) and move all surfaces into the primary
plane.
When we analyze and accumulate damage prior to repainting, we need to
accumulate damage per plane, so that whatever damage a surface
contributes is accumulated in the plane that it's assigned to. Before,
we would always accumulate damge in the primary plane, which caused
repaints in the primary plane whenever a surface in a sprite or
framebuffer was damaged. Eliminating this repaint is a big win for
cases where we pageflip to a client surface or use a sprite overlay.
This also prepares for fixing the missing cursor updates, since we
now track damage to the cursor surface in a dedicated sprite plane.
In the wl_seat conversion, struct wl_touch got fields for the focused
surface and the client resource for the input device being focused.
However, the conversion was incomplete: the old fields
weston_seat::touch_focus* we still used by the event dispatching code,
but the new code never set them. Therefore no touch events were ever
sent.
From weston_seat, remove the fields touch_focus, touch_focus_listener,
touch_focus_resource, and touch_focus_resource_listener. They are
replaced by the corresponding fields and listeners from struct
wl_touch.
While doing this, fix touch_set_focus().
If touch_set_focus() was called first with surface A, and then with
surface B, without being called with NULL in between, it would corrupt
the destroy_signal list. It was equivalent of calling wl_signal_add()
for different signal sources with the same listener without removing in
between.
Now, touch_set_focus() first removes focus and listeners, and then
attempts to assign focus if requested. If the target client has not
subscribed for touch events, the touch focus will now be NULL.
Before this patch, the touch focus was left to the previous surface.
NOTE: this patch depends on the patch "server: add lose_touch_focus()"
for Wayland.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
When we hit a segv, it's often the case that we might crash again in
the attempt to clean up. Instead we introduce a minimal restore callback
in the backend abstraction, that shuts down as simply as possible. Then
we can call that from the segv handler, and then to aid debugging, we
raise SIGTRAP in the segv handler. This lets us run gdb on weston from
a different vt, and if we tell gdb
(gdb) handle SIGSEGV nostop
gdb won't stop when the segv happens but let weston clean up and switch vt,
and then stop when SIGTRAP is raised.
It's also possible to just let gdb catch the segv, and then use sysrq+k
followed by manual vt switch to get back.
Simplify RGB shader code and split off common code that could be reused.
This is preparatory work for YUV shaders.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Make weston_surface::texture and ::surface an array, while keeping
[0] for RGB surfaces.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
weston_compositor_init is always called late because most
implementations can't initialise GL until fairly late in the game.
Split it into a base version with the same name, followed by
weston_compositor_init_gl which can be called later on.
This simplifies compositor-wayland, which no longer needs a separate
global handler just for wl_seat.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
notify_modifiers will now synchronise Weston's internal state with the
XKB state, and send a modifier event if necessary. This eliminates the
need for update_modifier_state to have a return value at all.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
If update_state is true, then notify_key will continue to call
xkb_key_update_state to update the local state mask, as before this
commit. Otherwise, it will rely on the compositor to manually update
the state itself, for nested compositors.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
X11 has a set of eight modifiers which we want to represent. Cache
their indices when we create a weston_xkb_info, so we can use this from
compositor-x11 to keep the state synchronised exactly between the host X
server and a nested Weston instance.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
When the focus changes, wl_keyboard_set_focus (and, as an added bonus,
wl_pointer_set_focus) will now send wl_keyboard::modifier events for us
if we store the modifier state in the right place, so we don't have to
worry about that anymore.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This is the point where we have just finished rendering the new scene
but before we swap it to the front buffer. At this point, the
output->previous_damage region exactly corresponds to what was just
renders, as compared to previous frame.
We start tracking which hardware plane a surface is displayed on, which
lets us avoid generating damage when a hardware overlay/cursor is moved
around.
EGLDisplay is helpfully typedeffed as void *, which means that you won't
get conflicting-pointer-type warnings if you accidentally confuse it
with weston_compositor::wl_display. Rename it to make it more clear
which display you're dealing with, and also rename compositor-wayland's
parent.display member to parent.wl_display.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
We use the selection signal to get a callback when somebody sets a
selection (including the X server proxy) and then copy the contents
of the first mime type. If the selection is cleared (when the client
dies), we set a new selection with that contents.
These keymap events communicate the keymap from the compositor to the
clients via fd passing, rather than having the clients separately
compile a map.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This allows backends to generate their own keymaps and pass them in for
use rather than always forcing a single global keymap, which is
particularly useful for nested compositors.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
In practice this doesn't mean much right now, since they all just take
an extra reference on the global keymap.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Instead of using a uint32_t for state everywhere (except on the wire,
where that's still the call signature), use the new
wl_keyboard_key_state enum, and explicit comparisons.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Instead of using a uint32_t for state everywhere (except on the wire,
where that's still the call signature), use the new
wl_pointer_button_state enum, and explicit comparisons.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Similar to how we deal with modifiers, also add LED handling to the core
input code, with a callout into the backends to update them when they
change.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
When we update the modifier_state used for Weston bindings, derive this
from the XKB modifier state, rather than a hardcoded mapping of physical
keys to modifier state.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
As we need to keep a separate state for every seat (i.e. keyboard
interface) rather than a compositor-global state.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This event lets the compositor inform clients of the canonical keyboard
modifier/group state. Make sure we send it at appropriate moments from
the compositor, and listen for it in clients as well.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Here we create a new client/compositor interface in weston to allow
clients to report their x/y cursor position to the compositor. These
values are then used to center the zoom area on this point. This
is useful for everyone, especially people who are visually impaired.
This commit adds a new, built-in screen recorder tool. The tool UI is
still very simple, start with mod-r and stop it again with mod-r.
The recording is written to capture.wcap, in a simple run-length encoded
adhoc format. The wcap-decode tool can be used to extract a single frame
from the capture, for now, but the plan is to hook this up to libvpx and
generate webm output.
This lets us mark a rectangle in a texture and force the alpha to one
inside. This is useful for textures coming from X windows, where the X
window part is xRGB, that is 32 bit RGB with an undefined alpha channel
and the decorations are rendered with a well-defined alpha channel.
wl_input_device has been both renamed and split. wl_seat is now a
virtual object representing a group of logically related input devices
with related focus.
It now only generates one event: to let clients know that it has new
capabilities. It takes requests which hand back objects for the
wl_pointer, wl_keyboard and wl_touch interfaces it exposes which all
provide the old input interface, just under different names.
This commit tracks these changes in weston and the clients, as well as
similar renames (e.g. weston_input_device -> weston_seat). Some other
changes were necessary, e.g. renaming the name for the visible mouse
sprite from 'pointer' to 'cursor' so as to not conflict.
For simplicity, every seat is always exposed with all three interfaces,
although this will change as time goes on.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Add an xkb_names member to the base compositor info which contains the
RMLVO to use when building an XKB keymap. Add support for filling this
from the config file or from the underlying X11 server, with the usual
defaults.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
To be used by input code, paralleling the existing integer versions.
Enlarge the surface_{to,from}_global_float input types to GLfloat to
avoid losing precision.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
We're able now to create shell_surfaces inside Weston. This makes possible the
glue needed between shell and xserver-launcher.
On the desktop-shell, it was split the protocol part from shell_surface
specific functions to make this possible.
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
These new protocol events allow us to tell which outputs a surface is on, and
potentially update where we allocate our buffers from.
Signed-off-by: Casey Dahlin <cdahlin@redhat.com>
Switching display mode may happen when:
1. The fullscreen surface is at top most in fullscreen layer and with
"driver" method. Shell will switch output mode to match the surface
size. If no matched mode found, fall back to "fill" method.
2. The top fullscreen surface is destroyed or unset. Switch back to the
origin mode.
Some GL implementations do not provide GL_EXT_read_format_bgra
extension.
Set a glReadPixels format based on whether the extensions is supported
or not, and use that format in all backends.
Add RGBA->BGRA swapping copy to screenshooter to keep the shm buffer
data format as BGRA.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
This is a workaround for platforms, whose EGL headers miss the
definitions for EGL_WL_bind_wayland_display.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Compositor core does not do anything with udev, so the header is not
needed there. Move the #include into evdev.h, from where it gets used by
compositor-drm.c, too.
Also fix the fallout:
tty.c: In function 'tty_create':
tty.c:143:2: warning: implicit declaration of function 'fstat'
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
weston-launch starts weston and provides mechanism
for weston to set/drop drm master, open a tty,
and read input devices without being root.
Execution is allowed for local-active sessions
or users in the group weston-launch.
Use shell_stack_fullscreen() to raise fullscreen surface in activate(),
and before activate() a regular surface, move all the fullscreen
surfaces from fullscreen_layer to toplevel_layer.
Also add a void *private into struct wesont_surface since we already
have a configure() vfunc. That helps to get the associated fullscreen
surface of black surface.
This allows us to move the logic that calls shell->map() or
shell->configure() into shell while allowing it to be overriden for
surfaces that should not be handle by the shell, such as drag icons.
This patch adds a pointer function called configure to weston_surface,
moves the currsent surface_configure() code into shell and implements
a separate configure() for drag surfaces.
There was a lot of code here to do a lot of work we didn't need to do.
If we damage a surface with a shm buffer attached, all we need to do
is to re-upload the damaged region to the texture. As for drm buffers,
we don't assume anything changes on attach and only update the
regions the client tells us to update in the damage request.
Commit f992b2fc removed the saved keyboard focus logic to fix a crash
when the saved surface is destroyed. However, setting keyboard focus to
the first surface on the list ends up trying to set the focus to the
cursor surface most of the time. The end result is a NULL keyboard
focus.
This patch restores the saved keyboard focus logic and fixes the crash
mentioned above using a destroy listener.
Function weston_load_image() was deleted in f02a649a but the wayland
backend was not adapted to the new interface. This probably went
unoticed because the prototype for the missing function was not deleted
from compositor.h so the backend would compile without warnings.
On one hand, getopt (in particular the -o suboption syntax) sucks on the
server side, and on the client side we would like to avoid the glib
dependency. We can roll out own option parser and solve both problems
and save a few lines of code total.
This can happen for instance if the client that started the drag
crashes. Weston would crash because of the invalid surface pointed by
device->drag_surface.
Fix this by reseting the drag surface to nil on a destroy listener.
The surface data structure is now a list of list of surfaces. The core
compositor defines the fade and cursor layer, and it's up to the shell to
provide more layers for the various surface types it implements.
DPMS kicks in only when wscreensaver is launched, in the moment that shell
call lock() for the second time. Backlight control internals are managed by
libbacklight:
http://cgit.freedesktop.org/~vignatti/libbacklight/
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
This allows each output back end to optimize drawing using overlay planes
and cursors (yet to be integrated). If a surface is assigned to a
plane, the back end should clear its damage field so that the later
repaint code won't look at it.
Ideally, we would want to use <modifier>+Scroll binding but that will have
to wait for axis events. For now we just use keybindings. Zoom in/out with
Super+Up/Down.
Needed for implementing drag'n'drop icons. When a drag starts, the
compositor will position the top-left corner of the client supplied
icon surface at the cursor hotspot. On the first attach to that
surface, the client may want to reposition it but shell->map did not
take sx and sy parameters.
This changes shell->map interface to take sx and sy parameters and
change dekstop shell implementation to update the position of a
surface of type none according to those parameters. Since a surface
of type none won't actually be mapped, the effect of this change is
only visible for surfaces that are made visible by the compositor.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Surfaces like drag'n'drop icons shouldn't receive events as a normal
surface but are still created by the client so add a way for the
compositor to enable or disable the picking of a client surface.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
I know it's hard to figure out what the shells or backends will be
using as internal API at this point but we can try to minimize the
amount of WL_EXPORT being used anyway.
[pq: redone due to my earlier changes]
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Move the surface opaque region setup from weston_surface_configure() to
weston_surface_update_transform(), so we have less reason to call
update_transform from configure. Opaque region depends on geometry,
after all.
Also move the opaque field from weston_surface to
weston_surface::transform to make this obvious.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
When a transformed (rotated) surface is continuously resized from its
top-left corner, its location will drift. This is due to accumulating
rounding errors in transforming an offset from surface-local to global
coordinates in surface_attach().
Diminish the drift down to unobservable level by changing the
weston_surface global position from integer to float.
The offset transformation is now done without rounding. To preserve the
precision, wl_shell::configure() interface must use floats, and so does
weston_surface_configure(), too.
The con of this patch is that it adds inconsistency to the surface
position coordinates: sometimes they are floats, sometimes integers.
The uniform location variables should be signed, according to the OpenGL
ES 2 specification. Moreover, GL_NONE, i.e. 0, is not an invalid nor
special location; it is actually used as a valid uniform location.
Change struct weston_shader uniform members to signed.
Stop using 0 for identifying a non-existing uniform, use -1 instead.
Furthermore, as the spec says a) glGetUniformLocation() will return -1
for non-active/existing uniforms, and b) glUniform*() function will
simply ignore all calls with location -1, we can simplify the code. We
don't have to avoid locating uniforms that don't exist, and we don't
need to test for them in weston_surface_draw() either.
Remove the micro-optimisation that avoids setting 'alpha' uniform if it
has not changed, in the name of simplification.
Unify shader creation by dropping init_solid_shader(), and calling
weston_shader_init() instead. The downside is that we compile the vertex
shader twice at startup now.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
weston_surface::transform.boundingbox depends on width and height, and
therefore geometry.dirty flag, so move width and height into geometry.
Fix all users and check that the dirty flag is set.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Compute a surface bounding box, especially for transformed surfaces, for
which one cannot simply use x,y,width,height.
The bounding box depends on width and height, so these are now under the
geometry.dirty flag.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
weston_surface::transform.position depends on x,y, and therefore the
dirty flag, so move x and y into geometry.
Also add the missing dirty flags.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Put the surface translation (absolute position) into the surface
transformations list. This allows to set additional transformations
before and after the global translation.
Having the translation cached, changing the surface x,y now requires to
set the geometry.dirty flag.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Previously, if a surface was transformed, it repainted as a whole,
regardless of the computed repaint region. As damage regions determine
repaint regions and whether a surface is considered for drawing at all,
this lead to disappearing surfaces if all surfaces were considered
transformed. Also transparent transformed surfaces were redrawn without
the surfaces below being properly redrawn, leading to alpha-saturation.
Fix that by making texture_region() use the proper global-to-surface
coordinate transformation for texture coordinates. This makes it
possible to call texture_region() also for transformed surfaces.
As texture coordinates may now lie outside the valid texture image, the
fragment shader is modified to check the fragment texture coordinates.
The special path texture_transformed_surface() is no longer used and is
removed.
This change fixes many of the rendering artifacts related to transformed
surfaces.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
For unifying the coordinate system handling, introduce functions for
converting explicitly between the global and the surface local
coordinate systems.
Use these functions in the input path, replacing
weston_surface_transform().
In the draw path, rewrite transform_vertex() to take in surface local
coordinates.
As shell now uses the new functions, the rotation origin is properly
placed in the middle of the surface.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add the key binding Super+Alt+MouseLeftButton to start rotating a
surface by dragging. The rotation is removed, when the drag is near the
rotation origin.
Rotated surface are a stress test for input event coordinate
transformations, damage region tracking, draw transformations, and
window move and resize orientation.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
The compositor will likely do an order of magnitude less matrix
inversions than point transformations with an inverse, hence we do not
really need the optimised path for single-shot invert-and-transform.
Expose only the computing of the explicit inverse matrix in the API.
However, the matrix inversion tests need access to the internal
functions. Designate a unit test build by #defining UNIT_TEST, and
export the internal functions in that case.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Implement 4x4 matrix inversion based on LU-decomposition with partial
pivoting.
Instead of simply computing the inverse matrix explicitly, introduce the
type struct weston_inverse_matrix for storing the LU-decomposition and
the permutation from pivoting. Using doubles, this struct has greater
precision than struct weston_matrix.
If you need only few (less than 5, presumably) multiplications with the
inverse matrix, is it cheaper to use weston_inverse_matrix, and not
compute the inverse matrix explicitly into a weston_matrix.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Remove the inverse matrix member from struct weston_transform. It is
easier (and probably faster, too) to create and store only forward
transformation matrices in a list, multiply them once, and then invert
the final matrix, rather than creating both forward and inverse
matrices, and multiplying both.
Add a stub for the 4x4 matrix inversion function.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Having at most one transformation object attached to a surface is not
enough anymore. If we have a surface that needs to be scaled to
fullscreen, and then we have the zoom animation, we already need two
transformations combined.
Implement support for multiple transformations by adding a transformation
list. The final transformation is the ordered composite of those in the
list. To avoid traversing the list every single time, add a dirty flag,
and cache the final transformation.
The existing transformation users (only zoom) are converted.
Note: surface drawing should honour all kinds of transformations, but
not damage region code nor input event translating code take
transformations into account, AFAICT. Therefore anything but translation
will probably behave badly until they are fixed.
Cc: Juan Zhao <juan.j.zhao@linux.intel.com>
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
This removes more special cases from weston_output_repaint() and we
avoid creating and destroying the surface for each animation frame.
We gain another special case in weston_compositor_top(), but that's
less of a problem, and we'll fix that later.
We've trimmed down the actual repaint loop to just iterating through the
surface list and calling weston_surface_draw(), so we push that to the
backend without too much code duplication.
We have to deal with the data source going away. Even if we have a
reference to the server side data source, we can't do anything if the
client that provided the source went away. So just NULL the offers
source pointer in the destroy callback for the source.
This collided with the big weston rename, but git did a good job of fixing
most cases.
Conflicts:
compositor/compositor.h
src/compositor-x11.c
src/compositor.c
src/screenshooter.c
src/util.c
This rename addresses a few problems around the split between core
Wayland and the wayland-demos repository.
1) Initially, we had one big repository with protocol code, sample
compositor and sample clients. We split that repository to make it
possible to implement the protocol without pulling in the sample/demo
code. At this point, the compositor is more than just a "demo" and
wayland-demos doesn't send the right message. The sample compositor
is a useful, self-contained project in it's own right, and we want to
move away from the "demos" label.
2) Another problem is that the wayland-demos compositor is often
called "the wayland compsitor", but it's really just one possible
compositor. Existing X11 compositors are expected to add Wayland
support and then gradually phase out/modularize the X11 support, for
example. Conversely, it's hard to talk about the wayland-demos
compositor specifically as opposed to, eg, the wayland protocol or a
wayland compositor in general.
We are also renaming the repo to weston, and the compositor
subdirectory to src/, to emphasize that the main "output" is the
compositor.
Kristian Høgsberg