With H-Ext supported, VS bits are all hardwired to one in MIDELEG
denoting always delegated interrupts. This is being done in rmw_mideleg
but given mideleg is used in other places when routing interrupts
this change initializes it in riscv_cpu_realize to be on the safe side.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231016111736.28721-4-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISCV_EXCP_SEMIHOST is set to 0x10, which can be a local interrupt id
as well. This change moves RISCV_EXCP_SEMIHOST to switch case so that
async flag check is performed before invoking semihosting logic.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231016111736.28721-3-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zicboz they're more likely to do 'grep -i zicboz' than 'grep -i
icboz'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zicbom they're more likely to do 'grep -i zicbom' than 'grep -i
icbom'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zicsr they're more likely to do 'grep -i zicsr' than 'grep -i icsr'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zifencei they're more likely to do 'grep -i zifencei' than 'grep -i
ifencei'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM_IRQFD was introduced in Linux 2.6.32, and since then it has always been
available on architectures that support an in-kernel interrupt controller.
We can require it unconditionally.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The operator (fwmacc16) of vfwmaccbf16.vf helper function should be
replaced by fwmaccbf16.
Fixes: adf772b0f7 ("target/riscv: Add support for Zvfbfwma extension")
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231005095734.567575-1-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At this moment there are eleven CPU extension properties that starts
with capital 'Z': Zifencei, Zicsr, Zihintntl, Zihintpause, Zawrs, Zfa,
Zfh, Zfhmin, Zve32f, Zve64f and Zve64d. All other extensions are named
with lower-case letters.
We want all properties to be named with lower-case letters since it's
consistent with the riscv-isa string that we create in the FDT. Having
these 11 properties to be exceptions can be confusing.
Deprecate all of them. Create their lower-case counterpart to be used as
maintained CPU properties. When trying to use any deprecated property a
warning message will be displayed, recommending users to switch to the
lower-case variant:
./build/qemu-system-riscv64 -M virt -cpu rv64,Zifencei=true --nographic
qemu-system-riscv64: warning: CPU property 'Zifencei' is deprecated. Please use 'zifencei' instead
This will give users some time to change their scripts before we remove
the capital 'Z' properties entirely.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231009112817.8896-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISCV_CPU(cs) uses a checked cast. When QOM cast debugging is enabled
this adds about 5% total overhead when emulating RV64 on x86-64 host.
Using a RISC-V guest with 16 vCPUs, 16 GB of guest RAM, virtio-blk
disk. The guest has a copy of the qemu source tree. The test
involves compiling the qemu source tree with 'make clean; time make -j16'.
Before making this change the compile step took 449 & 447 seconds over
two consecutive runs.
After making this change: 428 & 421 seconds.
The saving is over 5%.
Thanks: Paolo Bonzini
Thanks: Philippe Mathieu-Daudé
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231009124859.3373696-2-rjones@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vendor CPUs that set RVG are displaying user warnings about other
extensions that RVG must enable, one warning per CPU. E.g.:
$ ./build/qemu-system-riscv64 -smp 8 -M virt -cpu veyron-v1 -nographic
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
This happens because we decided a while ago that, for simplicity, vendor
CPUs could set RVG instead of setting each G extension individually in
their cpu_init(). Our warning isn't taking that into account, and we're
bugging users with a warning that we're causing ourselves.
In a closer look we conclude that this warning is not warranted in any
other circumstance since we're just following the ISA [1], which states
in chapter 24:
"One goal of the RISC-V project is that it be used as a stable software
development target. For this purpose, we define a combination of a base
ISA (RV32I or RV64I) plus selected standard extensions (IMAFD, Zicsr,
Zifencei) as a 'general-purpose' ISA, and we use the abbreviation G for
the IMAFDZicsr Zifencei combination of instruction-set extensions."
With this in mind, enabling IMAFD_Zicsr_Zifencei if the user explicitly
enables 'G' is an expected behavior and the warning is unneeded. Any
user caught by surprise should refer to the ISA.
Remove the warning when handling RVG.
[1] https://github.com/riscv/riscv-isa-manual/releases/download/Ratified-IMAFDQC/riscv-spec-20191213.pdf
Reported-by: Paul A. Clarke <pclarke@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231003122539.775932-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM for RISC-V started supporting KVM_GET_REG_LIST in Linux 6.6. It
consists of a KVM ioctl() that retrieves a list of all available regs
for get_one_reg/set_one_reg. Regs that aren't present in the list aren't
supported in the host.
This simplifies our lives when initing the KVM regs since we don't have
to always attempt a KVM_GET_ONE_REG for all regs QEMU knows. We'll only
attempt a get_one_reg() if we're sure the reg is supported, i.e. it was
retrieved by KVM_GET_REG_LIST. Any error in get_one_reg() will then
always considered fatal, instead of having to handle special error codes
that might indicate a non-fatal failure.
Start by moving the current kvm_riscv_init_multiext_cfg() logic into a
new kvm_riscv_read_multiext_legacy() helper. We'll prioritize using
KVM_GET_REG_LIST, so check if we have it available and, in case we
don't, use the legacy() logic.
Otherwise, retrieve the available reg list and use it to check if the
host supports our known KVM regs, doing the usual get_one_reg() for
the supported regs and setting cpu->cfg accordingly.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231003132148.797921-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Our error message is returning the value of 'ret', which will be always
-1 in case of error, and will not be that useful:
qemu-system-riscv64: Unable to read ISA_EXT KVM register ssaia, error -1
Improve the error message by outputting 'errno' instead of 'ret'. Use
strerrorname_np() to output the error name instead of the error code.
This will give us what we need to know right away:
qemu-system-riscv64: Unable to read ISA_EXT KVM register ssaia, error code: ENOENT
Given that we're going to exit(1) in this condition instead of
attempting to recover, remove the 'kvm_riscv_destroy_scratch_vcpu()'
call.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231003132148.797921-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At this moment we do not expose extension properties for vendor CPUs
because that would allow users to change them via command line. The
drawback is that if we were to add an API that shows all CPU properties,
e.g. qmp-query-cpu-model-expansion, we won't be able to show extensions
state of vendor CPUs.
We have the required machinery to create extension properties for vendor
CPUs while not allowing users to enable extensions. Disabling existing
extensions is allowed since it can be useful for debugging.
Change the set() callback cpu_set_multi_ext_cfg() to allow enabling
extensions only for generic CPUs. In cpu_add_multi_ext_prop() let's not
set the default values for the properties if we're not dealing with
generic CPUs, otherwise the values set in cpu_init() of vendor CPUs will
be overwritten. And finally, in tcg_cpu_instance_init(), add cpu user
properties for all CPUs.
For the veyron-v1 CPU, we're now able to disable existing extensions
like smstateen:
$ ./build/qemu-system-riscv64 --nographic -M virt \
-cpu veyron-v1,smstateen=false
But setting extensions that the CPU didn't set during cpu_init(), like
V, is not allowed:
$ ./build/qemu-system-riscv64 --nographic -M virt \
-cpu veyron-v1,v=true
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.v=true:
'veyron-v1' CPU does not allow enabling extensions
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230926183109.165878-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll introduce generic errors that will output a CPU type name via its
RISCVCPU pointer. Create a helper for that.
Use the helper in tcg_cpu_realizefn() instead of hardcoding the 'host'
CPU name.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230926183109.165878-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Priv spec validation is TCG specific. Move it to the TCG accel class.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230925175709.35696-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This array will be read by the TCG accel class, allowing it to handle
priv spec verifications on its own. The array will remain here in cpu.c
because it's also used by the riscv,isa string function.
To export it we'll finish it with an empty element since ARRAY_SIZE()
won't work outside of cpu.c. Get rid of its ARRAY_SIZE() usage now to
alleviate the changes for the next patch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All code related to MISA TCG properties is also moved.
At this point, all TCG properties handling is done in tcg-cpu.c, all KVM
properties handling is done in kvm-cpu.c.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The array isn't marked as 'const' because we're initializing their
elements in riscv_cpu_add_misa_properties(), 'name' and 'description'
fields.
In a closer look we can see that we're not using these 2 fields after
creating the MISA properties. And we can create the properties by using
riscv_get_misa_ext_name() and riscv_get_misa_ext_description()
directly.
Remove the 'name' and 'description' fields from RISCVCPUMisaExtConfig
and make misa_ext_cfgs[] a const array.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
tcg_cpu_instance_init() will be the 'cpu_instance_init' impl for the TCG
accelerator. It'll be called from within riscv_cpu_post_init(), via
accel_cpu_instance_init(), similar to what happens with KVM. In fact, to
preserve behavior, the implementation will be similar to what
riscv_cpu_post_init() already does.
In this patch we'll move riscv_cpu_add_user_properties() and
riscv_init_max_cpu_extensions() and all their dependencies to tcg-cpu.c.
All multi-extension properties code was moved. The 'multi_ext_user_opts'
hash table was also moved to tcg-cpu.c since it's a TCG only structure,
meaning that we won't have to worry about initializing a TCG hash table
when running a KVM CPU anymore.
riscv_cpu_add_user_properties() will remain in cpu.c for now due to how
much code it requires to be moved at the same time. We'll do that in the
next patch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll move riscv_init_max_cpu_extensions() to tcg-cpu.c in the next
patch and set_misa() needs to be usable from there.
Rename it to riscv_cpu_set_misa() and make it public.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_cpu_add_misa_properties() is being used to fill the missing KVM
MISA properties but it is a TCG helper that was adapted to do so. We'll
move it to tcg-cpu.c in the next patches, meaning that KVM needs to fill
the remaining MISA properties on its own.
Do not use riscv_cpu_add_misa_properties(). Let's create a new array
with all available MISA bits we support that can be read by KVM. The
array is zero terminate to allow us to iterate through it without
knowing its size.
Then, inside kvm_riscv_add_cpu_user_properties(), we'll create all KVM
MISA properties as usual and then use this array to add any missing MISA
properties with the riscv_cpu_add_kvm_unavail_prop() helper.
Note that we're creating misa_bits[], and not using the existing
'riscv_single_letter_exts[]', because the latter is tuned for riscv,isa
related functions and it doesn't have all MISA bits we support. Commit
0e2c377023 ("target/riscv: misa to ISA string conversion fix") has the
full context.
While we're at it, move both satp and the multi-letter extension
properties to kvm_riscv_add_cpu_user_properties() as well.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the files to a 'kvm' dir to promote more code separation between
accelerators and making our lives easier supporting build options such
as --disable-tcg.
Rename kvm.c to kvm-cpu.c to keep it in line with its TCG counterpart.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a KVM accelerator class like we did with TCG. The difference is
that, at least for now, we won't be using a realize() implementation for
this accelerator.
We'll start by assiging kvm_riscv_cpu_add_kvm_properties(), renamed to
kvm_cpu_instance_init(), as a 'cpu_instance_init' implementation. Change
riscv_cpu_post_init() to invoke accel_cpu_instance_init(), which will go
through the 'cpu_instance_init' impl of the current acceleration (if
available) and execute it. The end result is that the KVM initial setup,
i.e. starting registers and adding its specific properties, will be done
via this hook.
Add a 'tcg_enabled()' condition in riscv_cpu_post_init() to avoid
calling riscv_cpu_add_user_properties() when running KVM. We'll remove
this condition when the TCG accel class get its own 'cpu_instance_init'
implementation.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This file is not needed for some time now. Both kvm_riscv_reset_vcpu()
and kvm_riscv_set_irq() have public declarations in kvm_riscv.h and are
wrapped in 'if kvm_enabled()' blocks that the compiler will rip it out
in non-KVM builds.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This function is used for both accelerators. Make it public, and call it
from kvm_riscv_cpu_add_kvm_properties(). This will make it easier to
split KVM specific code for the KVM accelerator class in the next patch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll introduce the KVM accelerator class with a 'cpu_instance_init'
implementation that is going to be invoked during the common
riscv_cpu_post_init() (via accel_cpu_instance_init()). This
instance_init will execute KVM exclusive code that TCG doesn't care
about, such as adding KVM specific properties, initing registers using a
KVM scratch CPU and so on.
The core of the forementioned cpu_instance_init impl is the current
riscv_cpu_add_kvm_properties() that is being used by the common code via
riscv_cpu_add_user_properties() in cpu.c. Move it to kvm.c, together
will all the relevant artifacts, exporting and renaming it to
kvm_riscv_cpu_add_kvm_properties() so cpu.c can keep using it for now.
To make this work we'll need to export riscv_cpu_extensions,
riscv_cpu_vendor_exts and riscv_cpu_experimental_exts from cpu.c as
well. The TCG accelerator will also need to access those in the near
future so this export will benefit us in the long run.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll need to export these arrays to the accelerator classes in the next
patches. Mark them as 'const' now because they should not be modified at
runtime.
Note that 'riscv_cpu_options' will also be exported, but can't be marked
as 'const', because the properties are changed via
qdev_property_add_static().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This CPU only exists if we're compiling with KVM so move it to the kvm
specific file.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All generic CPUs call riscv_cpu_add_user_properties(). The 'max' CPU
calls riscv_init_max_cpu_extensions(). Both can be moved to a common
instance_post_init() callback, implemented in riscv_cpu_post_init(),
called by all CPUs. The call order then becomes:
riscv_cpu_init() -> cpu_init() of each CPU -> .instance_post_init()
In the near future riscv_cpu_post_init() will call the init() function
of the current accelerator, providing a hook for KVM and TCG accel
classes to change the init() process of the CPU.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the remaining of riscv_tcg_ops now that we have a working realize()
implementation.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This function is the core of the RISC-V validations for TCG CPUs, and it
has a lot going on.
Functions in cpu.c were made public to allow them to be used by the KVM
accelerator class later on. 'cpu_cfg_ext_get_min_version()' is notably
hard to move it to another file due to its dependency with isa_edata_arr[]
array, thus make it public and use it as is for now.
riscv_cpu_validate_set_extensions() is kept public because it's used by
csr.c in write_misa().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_cpu_realize_tcg() was added to allow TCG cpus to have a different
realize() path during the common riscv_cpu_realize(), making it a good
choice to start moving TCG exclusive code to tcg-cpu.c.
Rename it to tcg_cpu_realizefn() and assign it as a implementation of
accel::cpu_realizefn(). tcg_cpu_realizefn() will then be called during
riscv_cpu_realize() via cpu_exec_realizefn(). We'll use a similar
approach with KVM in the near future.
riscv_cpu_validate_set_extensions() is too big and with too many
dependencies to be moved in this same patch. We'll do that next.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230925175709.35696-3-dbarboza@ventanamicro.com>
[ Changes by AF:
- Renames to fix build failures after rebase
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/riscv/cpu.c needs to handle all possible accelerators (TCG and
KVM at this moment) during both init() and realize() time. This forces
us to resort to a lot of "if tcg" and "if kvm" throughout the code,
which isn't wrong, but can get cluttered over time. Splitting
acceleration specific code from cpu.c to its own file will help to
declutter the existing code and it will also make it easier to support
KVM/TCG only builds in the future.
We'll start by adding a new subdir called 'tcg' and a new file called
'tcg-cpu.c'. This file will be used to introduce a new accelerator class
for TCG acceleration in RISC-V, allowing us to center all TCG exclusive
code in its file instead of using 'cpu.c' for everything. This design is
inpired by the work Claudio Fontana did in x86 a few years ago in commit
f5cc5a5c1 ("i386: split cpu accelerators from cpu.c, using
AccelCPUClass").
To avoid moving too much code at once we'll start by adding the new file
and TCG AccelCPUClass declaration. The 'class_init' from the accel class
will init 'tcg_ops', relieving the common riscv_cpu_class_init() from
doing it.
'riscv_tcg_ops' is being exported from 'cpu.c' for now to avoid having
to deal with moving code and files around right now. We'll focus on
decoupling the realize() logic first.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925175709.35696-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch fixes guest reboot errors when using KVM.
There are two issues when rebooting a guest using KVM
1. When the guest initiates a reboot the host is unable to stop the vcpu
2. When running a SMP guest the qemu monitor system_reset causes a vcpu crash
This can be fixed by clearing the CSR values at reset and syncing the
MPSTATE with the host.
Signed-off-by: liguang.zhang <liguang.zhang@hexintek.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230913091332.17355-1-18622748025@163.com>
[ Changes by AF
- Fixup commit message
- Fixup patch style
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Enabling RVG will enable a set of extensions that we're not checking if
the user was okay enabling or not. And in this case we want to error
out, instead of ignoring, otherwise we will be inconsistent enabling RVG
without all its extensions.
After this patch, disabling ifencei or icsr while enabling RVG will
result in error:
$ ./build/qemu-system-riscv64 -M virt -cpu rv64,g=true,Zifencei=false --nographic
qemu-system-riscv64: RVG requires Zifencei but user set Zifencei to false
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-21-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a new cpu_cfg_ext_is_user_set() helper to check if an extension was
set by the user in the command line. Use it inside
cpu_cfg_ext_auto_update() to verify if the user set a certain extension
and, if that's the case, do not change its value.
This will make us honor user choice instead of overwriting the values.
Users will then be informed whether they're using an incompatible set of
extensions instead of QEMU setting a magic value that works.
The reason why we're not implementing user choice for MISA extensions
right now is because, today, we do not silently change any MISA bit
during realize() time (we do warn when enabling bits if RVG is enabled).
We do that - a lot - with multi-letter extensions though, so we're
handling the most immediate concern first.
After this patch, we'll now error out if the user explicitly set 'zce' to true
and 'zca' to false:
$ ./build/qemu-system-riscv64 -M virt -cpu rv64,zce=true,zca=false -nographic
qemu-system-riscv64: Zcf/Zcd/Zcb/Zcmp/Zcmt extensions require Zca extension
This didn't happen before because we were enabling 'zca' if 'zce' was enabled
regardless if the user set 'zca' to false.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Before adding support to detect if an extension was user set we need to
handle how we're enabling extensions in riscv_init_max_cpu_extensions().
object_property_set_bool() calls the set() callback for the property,
and we're going to use this callback to set the 'multi_ext_user_opts'
hash.
This means that, as is today, all extensions we're setting for the 'max'
CPU will be seen as user set in the future. Let's change set_bool() to
isa_ext_update_enabled() that will just enable/disable the flag on a
certain offset.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If we want to make better decisions when auto-enabling extensions during
realize() we need a way to tell if an user set an extension manually.
The RISC-V KVM driver has its own solution via a KVMCPUConfig struct
that has an 'user_set' flag that is set during the Property set()
callback. The set() callback also does init() time validations based on
the current KVM driver capabilities.
For TCG we would want a 'user_set' mechanic too, but we would look
ad-hoc via cpu_cfg_ext_auto_update() if a certain extension was user set
or not. If we copy what was made in the KVM side we would look for
'user_set' for one into 60+ extension structs spreaded in 3 arrays
(riscv_cpu_extensions, riscv_cpu_experimental_exts,
riscv_cpu_vendor_exts).
We'll still need an extension struct but we won't be using the
'user_set' flag:
- 'RISCVCPUMultiExtConfig' will be our specialized structure, similar to what
we're already doing with the MISA extensions in 'RISCVCPUMisaExtConfig'.
DEFINE_PROP_BOOL() for all 3 extensions arrays were replaced by
MULTI_EXT_CFG_BOOL(), a macro that will init our specialized struct;
- the 'multi_ext_user_opts' hash will be used to store the offset of each
extension that the user set via the set() callback, cpu_set_multi_ext_cfg().
For now we're just initializing and populating it - next patch will use
it to determine if a certain extension was user set;
- cpu_add_multi_ext_prop() is a new helper that will replace the
qdev_property_add_static() calls that our macros are doing to populate
user properties. The macro was renamed to ADD_CPU_MULTIEXT_PROPS_ARRAY()
for clarity. Note that the non-extension properties in
riscv_cpu_options[] still need to be declared via qdev().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Let's change the other instances in realize() where we're enabling an
extension based on a certain criteria (e.g. it's a dependency of another
extension).
We're leaving icsr and ifencei being enabled during RVG for later -
we'll want to error out in that case. Every other extension enablement
during realize is now done via cpu_cfg_ext_auto_update().
The end goal is that only cpu init() functions will handle extension
flags directly via "cpu->cfg.ext_N = true|false".
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
During realize() time we're activating a lot of extensions based on some
criteria, e.g.:
if (cpu->cfg.ext_zk) {
cpu->cfg.ext_zkn = true;
cpu->cfg.ext_zkr = true;
cpu->cfg.ext_zkt = true;
}
This practice resulted in at least one case where we ended up enabling
something we shouldn't: RVC enabling zca/zcd/zcf when using a CPU that
has priv_spec older than 1.12.0.
We're also not considering user choice. There's no way of doing it now
but this is about to change in the next few patches.
cpu_cfg_ext_auto_update() will check for priv version mismatches before
enabling extensions. If we have a mismatch between the current priv
version and the extension we want to enable, do not enable it. In the
near future, this same function will also consider user choice when
deciding if we're going to enable/disable an extension or not.
For now let's use it to handle zca/zcd/zcf enablement if RVC is enabled.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V KVM driver uses a CPUCFG() macro that calculates the offset
of a certain field in the struct RISCVCPUConfig. We're going to use this
macro in target/riscv/cpu.c as well in the next patches. Make it public.
Rename it to CPU_CFG_OFFSET() for more clarity while we're at it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230912132423.268494-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll have future usage for a function where, given an offset of the
struct RISCVCPUConfig, the flag is updated to a certain val.
Change all existing callers to use edata->ext_enable_offset instead of
'edata'.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'any' CPU type was introduced in commit dc5bd18fa5 ("RISC-V CPU
Core Definition"), being around since the beginning. It's not an easy
CPU to use: it's undocumented and its name doesn't tell users much about
what the CPU is supposed to bring. 'git log' doesn't help us either in
knowing what was the original design of this CPU type.
The closest we have is a comment from Alistair [1] where he recalls from
memory that the 'any' CPU is supposed to behave like the newly added
'max' CPU. He also suggested that the 'any' CPU should be removed.
The default CPUs are rv32 and rv64, so removing the 'any' CPU will have
impact only on users that might have a script that uses '-cpu any'.
And those users are better off using the default CPUs or the new 'max'
CPU.
We would love to just remove the code and be done with it, but one does
not simply remove a feature in QEMU. We'll put the CPU in quarantine
first, letting users know that we have the intent of removing it in the
future.
[1] https://lists.gnu.org/archive/html/qemu-devel/2023-07/msg02891.html
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230912132423.268494-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'max' CPU type is used by tooling to determine what's the most
capable CPU a current QEMU version implements. Other archs such as ARM
implements this type. Let's add it to RISC-V.
What we consider "most capable CPU" in this context are related to
ratified, non-vendor extensions. This means that we want the 'max' CPU
to enable all (possible) ratified extensions by default. The reasoning
behind this design is (1) vendor extensions can conflict with each other
and we won't play favorities deciding which one is default or not and
(2) non-ratified extensions are always prone to changes, not being
stable enough to be enabled by default.
All this said, we're still not able to enable all ratified extensions
due to conflicts between them. Zfinx and all its dependencies aren't
enabled because of a conflict with RVF. zce, zcmp and zcmt are also
disabled due to RVD conflicts. When running with 64 bits we're also
disabling zcf.
MISA bits RVG, RVJ and RVV are also being set manually since they're
default disabled.
This is the resulting 'riscv,isa' DT for this new CPU:
rv64imafdcvh_zicbom_zicboz_zicsr_zifencei_zihintpause_zawrs_zfa_
zfh_zfhmin_zca_zcb_zcd_zba_zbb_zbc_zbkb_zbkc_zbkx_zbs_zk_zkn_zknd_
zkne_zknh_zkr_zks_zksed_zksh_zkt_zve32f_zve64f_zve64d_
smstateen_sscofpmf_sstc_svadu_svinval_svnapot_svpbmt
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Inside riscv_cpu_validate_v() we're always throwing a log message if the
user didn't set a vector version via 'vext_spec'.
We're going to include one case with the 'max' CPU where env->vext_ver
will be set in the cpu_init(). But that alone will not stop the "vector
version is not specified" message from appearing. The usefulness of this
log message is debatable for the generic CPUs, but for a 'max' CPU type,
where we are supposed to deliver a CPU model with all features possible,
it's strange to force users to set 'vext_spec' to get rid of this
message.
Change riscv_cpu_validate_v() to not throw this log message if
env->vext_ver is already set.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230912132423.268494-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use a helper in riscv_cpu_add_kvm_properties() to eliminate some of its
code repetition.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230912132423.268494-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The code inside riscv_cpu_add_user_properties() became quite repetitive
after recent changes. Add a helper to hide the repetition away.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230912132423.268494-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Our goal is to make riscv_cpu_extensions[] hold only ratified,
non-vendor extensions.
Create a new riscv_cpu_vendor_exts[] array for them, changing
riscv_cpu_add_user_properties() and riscv_cpu_add_kvm_properties()
accordingly.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new riscv_cpu_experimental_exts[] to store the non-ratified
extensions properties. Once they are ratified we'll move them back to
riscv_cpu_extensions[].
riscv_cpu_add_user_properties() and riscv_cpu_add_kvm_properties() are
changed to keep adding non-ratified properties to users.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add DEFINE_PROP_END_OF_LIST() and eliminate the ARRAY_SIZE() usage when
iterating in the riscv_cpu_options[] array, making it similar to what
we already do when working with riscv_cpu_extensions[].
We also have a more sophisticated motivation behind this change. In the
future we might need to export riscv_cpu_options[] to other files, and
ARRAY_LIST() doesn't work properly in that case because the array size
isn't exposed to the header file. Here's a future sight of what we would
deal with:
./target/riscv/kvm.c:1057:5: error: nested extern declaration of 'riscv_cpu_add_misa_properties' [-Werror=nested-externs]
n file included from ../target/riscv/kvm.c:19:
home/danielhb/work/qemu/include/qemu/osdep.h:473:31: error: invalid application of 'sizeof' to incomplete type 'const RISCVCPUMultiExtConfig[]'
473 | #define ARRAY_SIZE(x) ((sizeof(x) / sizeof((x)[0])) + \
| ^
./target/riscv/kvm.c:1047:29: note: in expansion of macro 'ARRAY_SIZE'
1047 | for (int i = 0; i < ARRAY_SIZE(_array); i++) { \
| ^~~~~~~~~~
./target/riscv/kvm.c:1059:5: note: in expansion of macro 'ADD_UNAVAIL_KVM_PROP_ARRAY'
1059 | ADD_UNAVAIL_KVM_PROP_ARRAY(obj, riscv_cpu_extensions);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
home/danielhb/work/qemu/include/qemu/osdep.h:473:31: error: invalid application of 'sizeof' to incomplete type 'const RISCVCPUMultiExtConfig[]'
473 | #define ARRAY_SIZE(x) ((sizeof(x) / sizeof((x)[0])) + \
| ^
./target/riscv/kvm.c:1047:29: note: in expansion of macro 'ARRAY_SIZE'
1047 | for (int i = 0; i < ARRAY_SIZE(_array); i++) { \
Homogenize the present and change the future by using
DEFINE_PROP_END_OF_LIST() in riscv_cpu_options[].
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230912132423.268494-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Future patches will split the existing Property arrays even further, and
the existing code in riscv_cpu_add_user_properties() will start to scale
bad with it because it's dealing with KVM constraints mixed in with TCG
constraints. We're going to pay a high price to share a couple of common
lines of code between the two.
Create a new kvm_riscv_cpu_add_kvm_properties() helper that will be
forked from riscv_cpu_add_user_properties() if we're running KVM. The
helper includes all properties that a KVM CPU will add. The rest of
riscv_cpu_add_user_properties() body will then be relieved from having
to deal with KVM constraints.
The helper was declared in kvm_stubs.h, while being implemented in
cpu.c, to allow '--enable-debug' builds to work. The compiler won't
remove the kvm_riscv_cpu_add_kvm_properties() reference when
'kvm_enabled()' is false if we end up with an unused function. Even
though being a KVM only helper we can't implement it in kvm.c due to its
many dependencies inside cpu.c, so make it public in kvm_riscv.h and
keep its implementation in cpu.c for now. We'll move it to kvm.c in the
near future.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After the introduction of riscv_cpu_options[] all properties in
riscv_cpu_extensions[] are booleans. This check is now obsolete.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll add a new CPU type that will enable a considerable amount of
extensions. To make it easier for us we'll do a few cleanups in our
existing riscv_cpu_extensions[] array.
Start by splitting all CPU non-boolean options from it. Create a new
riscv_cpu_options[] array for them. Add all these properties in
riscv_cpu_add_user_properties() as it is already being done today.
'mmu' and 'pmp' aren't really extensions in the usual way we think about
RISC-V extensions. These are closer to CPU features/options, so move
both to riscv_cpu_options[] too. In the near future we'll need to match
all extensions with all entries in isa_edata_arr[], and so it happens
that both 'mmu' and 'pmp' do not have a riscv,isa string (thus, no priv
spec version restriction). This further emphasizes the point that these
are more a CPU option than an extension.
No functional changes made.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230912132423.268494-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All implementations of gdb_arch_name() returns dynamic duplicates of
static strings. It's also unlikely that there will be an implementation
of gdb_arch_name() that returns a truly dynamic value due to the nature
of the function returning a well-known identifiers. Qualify the value
gdb_arch_name() with const and make all of its implementations return
static strings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230912224107.29669-8-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-15-alex.bennee@linaro.org>
Finish the convertion started with commit de6cd7599b
("meson: Replace softmmu_ss -> system_ss"). If the
$target_type is 'system', then use the target_system_arch[]
source set :)
Mechanical change doing:
$ sed -i -e s/target_softmmu_arch/target_system_arch/g \
$(git grep -l target_softmmu_arch)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-13-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-6-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function is now empty, so remove it. In the case of
m68k and tricore, this empties the class instance initfn,
so remove those as well.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Retain the separate structure to emphasize its importance.
Enforce CPUArchState always follows CPUState without padding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The omission of alignment has technically been wrong since
269bd5d8f6, where QEMU_ALIGNED was added to CPUTLBDescFast.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand. Bugs love to hide in such code.
Evidence: "[PATCH v3 1/7] migration/rdma: Fix save_page method to fail
on polling error".
This patch removes the local variable shadowing. Tested by adding:
--extra-cflags='-Wshadow=local -Wno-error=shadow=local -Wno-error=shadow=compatible-local'
To configure
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925043023.71448-4-alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand. Bugs love to hide in such code.
Evidence: "[PATCH v3 1/7] migration/rdma: Fix save_page method to fail
on polling error".
This patch removes the local variable shadowing. Tested by adding:
--extra-cflags='-Wshadow=local -Wno-error=shadow=local -Wno-error=shadow=compatible-local'
To configure
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925043023.71448-3-alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
As per ISA:
"For CSRRWI, if rd=x0, then the instruction shall not read the CSR and
shall not cause any of the side effects that might occur on a CSR read."
trans_csrrwi() and trans_csrrw() call do_csrw() if rd=x0, do_csrw() calls
riscv_csrrw_do64(), via helper_csrw() passing NULL as *ret_value.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230808090914.17634-1-nikita.shubin@maquefel.me>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to the new spec, when vsiselect has a reserved value, attempts
from M-mode or HS-mode to access vsireg, or from VS-mode to access
sireg, should preferably raise an illegal instruction exception.
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230816061647.600672-1-tommy.wu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the rule-lock bypass (RLB) bit is set in the mseccfg CSR, the PMP
configuration lock bits must not apply. While this behavior is
implemented for the pmpcfgX CSRs, this bit is not respected for
changes to the pmpaddrX CSRs. This patch ensures that pmpaddrX CSR
writes work even on locked regions when the global rule-lock bypass is
enabled.
Signed-off-by: Leon Schuermann <leons@opentitan.org>
Reviewed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230829215046.1430463-1-leon@is.currently.online>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_trigger_init() had been called on reset events that can happen
several times for a CPU and it allocated timers for itrigger. If old
timers were present, they were simply overwritten by the new timers,
resulting in a memory leak.
Divide riscv_trigger_init() into two functions, namely
riscv_trigger_realize() and riscv_trigger_reset() and call them in
appropriate timing. The timer allocation will happen only once for a
CPU in riscv_trigger_realize().
Fixes: 5a4ae64cac ("target/riscv: Add itrigger support when icount is enabled")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230818034059.9146-1-akihiko.odaki@daynix.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the accelerated SubBytes/ShiftRows/AddRoundKey AES helper to
implement the first half of the key schedule derivation. This does not
actually involve shifting rows, so clone the same value into all four
columns of the AES vector to counter that operation.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230831154118.138727-1-ardb@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 6df0b37e2ab breaks a --enable-debug build in a non-KVM
environment with the following error:
/usr/bin/ld: libqemu-riscv64-softmmu.fa.p/hw_intc_riscv_aplic.c.o: in function `riscv_kvm_aplic_request':
./qemu/build/../hw/intc/riscv_aplic.c:486: undefined reference to `kvm_set_irq'
collect2: error: ld returned 1 exit status
This happens because the debug build will poke into the
'if (is_kvm_aia(aplic->msimode))' block and fail to find a reference to
the KVM only function riscv_kvm_aplic_request().
There are multiple solutions to fix this. We'll go with the same
solution from the previous patch, i.e. add a kvm_enabled() conditional
to filter out the block. But there's a catch: riscv_kvm_aplic_request()
is a local function that would end up being used if the compiler crops
the block, and this won't work. Quoting Richard Henderson's explanation
in [1]:
"(...) the compiler won't eliminate entire unused functions with -O0"
We'll solve it by moving riscv_kvm_aplic_request() to kvm.c and add its
declaration in kvm_riscv.h, where all other KVM specific public
functions are already declared. Other archs handles KVM specific code in
this manner and we expect to do the same from now on.
[1] https://lore.kernel.org/qemu-riscv/d2f1ad02-eb03-138f-9d08-db676deeed05@linaro.org/
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230830133503.711138-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zicond is now codegen supported in both llvm and gcc.
This change allows seamless enabling/testing of zicond in downstream
projects. e.g. currently riscv-gnu-toolchain parses elf attributes
to create a cmdline for qemu but fails short of enabling it because of
the "x-" prefix.
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Message-ID: <20230808181715.436395-1-vineetg@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In the same emulated RISC-V host, the 'host' KVM CPU takes 4 times
longer to boot than the 'rv64' KVM CPU.
The reason is an unintended behavior of riscv_cpu_satp_mode_finalize()
when satp_mode.supported = 0, i.e. when cpu_init() does not set
satp_mode_max_supported(). satp_mode_max_from_map(map) does:
31 - __builtin_clz(map)
This means that, if satp_mode.supported = 0, satp_mode_supported_max
wil be '31 - 32'. But this is C, so satp_mode_supported_max will gladly
set it to UINT_MAX (4294967295). After that, if the user didn't set a
satp_mode, set_satp_mode_default_map(cpu) will make
cfg.satp_mode.map = cfg.satp_mode.supported
So satp_mode.map = 0. And then satp_mode_map_max will be set to
satp_mode_max_from_map(cpu->cfg.satp_mode.map), i.e. also UINT_MAX. The
guard "satp_mode_map_max > satp_mode_supported_max" doesn't protect us
here since both are UINT_MAX.
And finally we have 2 loops:
for (int i = satp_mode_map_max - 1; i >= 0; --i) {
Which are, in fact, 2 loops from UINT_MAX -1 to -1. This is where the
extra delay when booting the 'host' CPU is coming from.
Commit 43d1de32f8 already set a precedence for satp_mode.supported = 0
in a different manner. We're doing the same here. If supported == 0,
interpret as 'the CPU wants the OS to handle satp mode alone' and skip
satp_mode_finalize().
We'll also put a guard in satp_mode_max_from_map() to assert out if map
is 0 since the function is not ready to deal with it.
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: 6f23aaeb9b ("riscv: Allow user to set the satp mode")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230817152903.694926-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Svadu specification updated the name of the *envcfg bit from
HADE to ADUE.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230816141916.66898-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We create a vAIA chip by using the KVM_DEV_TYPE_RISCV_AIA and then set up
the chip with the KVM_DEV_RISCV_AIA_GRP_* APIs.
We also extend KVM accelerator to specify the KVM AIA mode. The "riscv-aia"
parameter is passed along with --accel in QEMU command-line.
1) "riscv-aia=emul": IMSIC is emulated by hypervisor
2) "riscv-aia=hwaccel": use hardware guest IMSIC
3) "riscv-aia=auto": use the hardware guest IMSICs whenever available
otherwise we fallback to software emulation.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-4-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We check the in-kernel irqchip support when using KVM acceleration.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-3-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit a47842d ("riscv: Add support for the Zfa extension") implemented the zfa extension.
However, it has some typos for fleq.d and fltq.d. Both of them misused the fltq.s
helper function.
Fixes: a47842d ("riscv: Add support for the Zfa extension")
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230728003906.768-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RVA23 Profiles states:
The RVA23 profiles are intended to be used for 64-bit application
processors that will run rich OS stacks from standard binary OS
distributions and with a substantial number of third-party binary user
applications that will be supported over a considerable length of time
in the field.
The chapter 4 of the unprivileged spec introduces the Zihintntl extension
and Zihintntl is a mandatory extension presented in RVA23 Profiles, whose
purpose is to enable application and operating system portability across
different implementations. Thus the DTS should contain the Zihintntl ISA
string in order to pass to software.
The unprivileged spec states:
Like any HINTs, these instructions may be freely ignored. Hence, although
they are described in terms of cache-based memory hierarchies, they do not
mandate the provision of caches.
These instructions are encoded with non-used opcode, e.g. ADD x0, x0, x2,
which QEMU already supports, and QEMU does not emulate cache. Therefore
these instructions can be considered as a no-op, and we only need to add
a new property for the Zihintntl extension.
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Message-ID: <20230726074049.19505-2-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These are WARL fields - zero out the bits for unavailable counters and
special case the TM bit in mcountinhibit which is hardwired to zero.
This patch achieves this by modifying the value written so that any use
of the field will see the correctly masked bits.
Tested by modifying OpenSBI to write max value to these CSRs and upon
subsequent read the appropriate number of bits for number of PMUs is
enabled and the TM bit is zero in mcountinhibit.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20230802124906.24197-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvksed vector-crypto extension, which
consists of the following instructions:
* vsm4k.vi
* vsm4r.[vv,vs]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
[lawrence.hunter@codethink.co.uk: Moved SM4 functions from
crypto_helper.c to vcrypto_helper.c]
[nazar.kazakov@codethink.co.uk: Added alignment checks, refactored code to
use macros, and minor style changes]
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-16-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvkg vector-crypto extension, which
consists of the following instructions:
* vgmul.vv
* vghsh.vv
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvkg property]
[max.chou@sifive.com: Replaced uint by int for cross win32 build]
Message-ID: <20230711165917.2629866-13-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvksh vector-crypto extension, which
consists of the following instructions:
* vsm3me.vv
* vsm3c.vi
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvksh property]
Message-ID: <20230711165917.2629866-12-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvknh vector-crypto extension, which
consists of the following instructions:
* vsha2ms.vv
* vsha2c[hl].vv
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvknha & x-zvknhb properties]
[max.chou@sifive.com: Replaced SEW selection to happened during
translation]
Message-ID: <20230711165917.2629866-11-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvkned vector-crypto extension, which
consists of the following instructions:
* vaesef.[vv,vs]
* vaesdf.[vv,vs]
* vaesdm.[vv,vs]
* vaesz.vs
* vaesem.[vv,vs]
* vaeskf1.vi
* vaeskf2.vi
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Imported aes-round.h and exposed x-zvkned
property]
[max.chou@sifive.com: Fixed endian issues and replaced the vstart & vl
egs checking by helper function]
[max.chou@sifive.com: Replaced bswap32 calls in aes key expanding]
Message-ID: <20230711165917.2629866-10-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvbb vector-crypto extension, which
consists of the following instructions:
* vrol.[vv,vx]
* vror.[vv,vx,vi]
* vbrev8.v
* vrev8.v
* vandn.[vv,vx]
* vbrev.v
* vclz.v
* vctz.v
* vcpop.v
* vwsll.[vv,vx,vi]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Fix imm mode of vror.vi]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvbb property]
Message-ID: <20230711165917.2629866-9-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move some macros out of `vector_helper` and into `vector_internals`.
This ensures they can be used by both vector and vector-crypto helpers
(latter implemented in proceeding commits).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-8-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zvbb (implemented in later commit) has a widening instruction, which
requires an extra check on the enabled extensions. Refactor
GEN_OPIVX_WIDEN_TRANS() to take a check function to avoid reimplementing
it.
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-7-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the checks out of `do_opiv{v,x,i}_gvec{,_shift}` functions
and into the corresponding macros. This enables the functions to be
reused in proceeding commits without check duplication.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-6-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvbc vector-crypto extension, which
consists of the following instructions:
* vclmulh.[vx,vv]
* vclmul.[vx,vv]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Max Chou <max.chou@sifive.com>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
[max.chou@sifive.com: Exposed x-zvbc property]
Message-ID: <20230711165917.2629866-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the redundant "vl == 0" check which is already included within the vstart >= vl check, when vl == 0.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230711165917.2629866-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Refactor the non SEW-specific stuff out of `GEN_OPIVV_TRANS` into
function `opivv_trans` (similar to `opivi_trans`). `opivv_trans` will be
used in proceeding vector-crypto commits.
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Take some functions/macros out of `vector_helper` and put them in a new
module called `vector_internals`. This ensures they can be used by both
vector and vector-crypto helpers (latter implemented in proceeding
commits).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230711165917.2629866-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AES MixColumns and InvMixColumns operations are relatively
expensive 4x4 matrix multiplications in GF(2^8), which is why C
implementations usually rely on precomputed lookup tables rather than
performing the calculations on demand.
Given that we already carry those tables in QEMU, we can just grab the
right value in the implementation of the RISC-V AES32 instructions. Note
that the tables in question are permuted according to the respective
Sbox, so we can omit the Sbox lookup as well in this case.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Zewen Ye <lustrew@foxmail.com>
Cc: Weiwei Li <liweiwei@iscas.ac.cn>
Cc: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230731084043.1791984-1-ardb@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit bef6f008b98(accel/tcg: Return bool from page_check_range) converts
integer return value to bool type. However, it wrongly converted the use
of the API in riscv fault-only-first, where page_check_range < = 0, should
be converted to !page_check_range.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230729031618.821-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The cpu->cfg.epmp extension is still experimental, but it already has a
'smepmp' riscv,isa string. Add it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230720132424.371132-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zmmul was promoted from experimental to ratified in commit 6d00ffad4e.
Add a riscv,isa string for it.
Fixes: 6d00ffad4e ("target/riscv: move zmmul out of the experimental properties")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230720132424.371132-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'host' CPU is available in a CONFIG_KVM build and it's currently
available for all accels, but is a KVM only CPU. This means that in a
RISC-V KVM capable host we can do things like this:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg -cpu host --nographic
qemu-system-riscv64: H extension requires priv spec 1.12.0
This CPU does not have a priv spec because we don't filter its extensions
via priv spec. We shouldn't be reaching riscv_cpu_realize_tcg() at all
with the 'host' CPU.
We don't have a way to filter the 'host' CPU out of the available CPU
options (-cpu help) if the build includes both KVM and TCG. What we can
do is to error out during riscv_cpu_realize_tcg() if the user chooses
the 'host' CPU with accel=tcg:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg -cpu host --nographic
qemu-system-riscv64: 'host' CPU is not compatible with TCG acceleration
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230721133411.474105-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"qemu/main-loop.h" declares functions related to QEMU's
main loop mutex, which these files don't access. Remove
the unused "qemu/main-loop.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-8-philmd@linaro.org>
These files don't use the CPU ld/st API, remove the unnecessary
"exec/cpu_ldst.h" header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230828221314.18435-7-philmd@linaro.org>
All these files access the CPU LD/ST API declared in "exec/cpu_ldst.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-4-philmd@linaro.org>
Declarations from "riscv/pmu.h" don't need anything from "qemu/log.h",
reduce it's inclusion to the source.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-3-philmd@linaro.org>
Changes the address type of the guest memory read/write functions from
target_ulong to abi_ptr. (abi_ptr is currently typedef'd to target_ulong
but that will change in a following commit.) This will reduce the
coupling between accel/ and target/.
Note: Function pointers that point to cpu_[st|ld]*() in target/riscv and
target/rx are also updated in this commit.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-6-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
kvm_arch_get_default_type() returns the default KVM type. This hook is
particularly useful to derive a KVM type that is valid for "none"
machine model, which is used by libvirt to probe the availability of
KVM.
For MIPS, the existing mips_kvm_type() is reused. This function ensures
the availability of VZ which is mandatory to use KVM on the current
QEMU.
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-2-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added doc comment for new function]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
cpu->cfg.mvendorid is a 32 bit field and kvm_set_one_reg() always write
a target_ulong val, i.e. a 64 bit field in a 64 bit host.
Given that we're passing a pointer to the mvendorid field, the reg is
reading 64 bits starting from mvendorid and going 32 bits in the next
field, marchid. Here's an example:
$ ./qemu-system-riscv64 -machine virt,accel=kvm -m 2G -smp 1 \
-cpu rv64,marchid=0xab,mvendorid=0xcd,mimpid=0xef(...)
(inside the guest)
# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdc_zicbom_zicboz_zihintpause_zbb_sstc
mmu : sv57
mvendorid : 0xab000000cd
marchid : 0xab
mimpid : 0xef
'mvendorid' was written as a combination of 0xab (the value from the
adjacent field, marchid) and its intended value 0xcd.
Fix it by assigning cpu->cfg.mvendorid to a target_ulong var 'reg' and
use it as input for kvm_set_one_reg(). Here's the result with this patch
applied and using the same QEMU command line:
# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdc_zicbom_zicboz_zihintpause_zbb_sstc
mmu : sv57
mvendorid : 0xcd
marchid : 0xab
mimpid : 0xef
This bug affects only the generic (rv64) CPUs when running with KVM in a
64 bit env since the 'host' CPU does not allow the machine IDs to be
changed via command line.
Fixes: 1fb5a622f7 ("target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230802180058.281385-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The previous check was failing with:
VLEN=128 ELEN = 64 SEW = 16 and LMUL = 1/8 which is a
valid combination.
Fix the check to allow valid combinations when VLEN is a multiple of
ELEN.
From the specification:
"In general, the requirement is to support LMUL ≥ SEWMIN/ELEN, where
SEWMIN is the narrowest supported SEW value and ELEN is the widest
supported SEW value. In the standard extensions, SEWMIN=8. For standard
vector extensions with ELEN=32, fractional LMULs of 1/2 and 1/4 must be
supported. For standard vector extensions with ELEN=64, fractional LMULs
of 1/2, 1/4, and 1/8 must be supported." Elsewhere in the specification
it makes clear that VLEN>=ELEN.
From inspection this new check allows:
VLEN=ELEN=64 1/2, 1/4, 1/8 for SEW >=8
VLEN=ELEN=32 1/2, 1/4 for SEW >=8
Fixes: d9b7609a1f ("target/riscv: rvv-1.0: configure instructions")
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230718131316.12283-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit bd30559568 made changes in how we're checking and disabling
extensions based on env->priv_ver. One of the changes was to move the
extension disablement code to the end of realize(), being able to
disable extensions after we've auto-enabled some of them.
An unfortunate side effect of this change started to happen with CPUs
that has an older priv version, like sifive-u54. Starting on commit
2288a5ce43 we're auto-enabling zca, zcd and zcf if RVC is enabled,
but these extensions are priv version 1.12.0. When running a cpu that
has an older priv ver (like sifive-u54) the user is spammed with
warnings like these:
qemu-system-riscv64: warning: disabling zca extension for hart 0x0000000000000000 because privilege spec version does not match
qemu-system-riscv64: warning: disabling zcd extension for hart 0x0000000000000000 because privilege spec version does not match
The warnings are part of the code that disables the extension, but in this
case we're throwing user warnings for stuff that we enabled on our own,
without user intervention. Users are left wondering what they did wrong.
A quick 8.1 fix for this nuisance is to check the CPU priv spec before
auto-enabling zca/zcd/zcf. A more appropriate fix will include a more
robust framework that will account for both priv_ver and user choice
when auto-enabling/disabling extensions, but for 8.1 we'll make it do
with this simple check.
It's also worth noticing that this is the only case where we're
auto-enabling extensions based on a criteria (in this case RVC) that
doesn't match the priv spec of the extensions we're enabling. There's no
need for more 8.1 band-aids.
Cc: Conor Dooley <conor@kernel.org>
Fixes: 2288a5ce43 ("target/riscv: add cfg properties for Zc* extension")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20230717154141.60898-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Replace the 0/-1 result with true/false.
Invert the sense of the test of all callers.
Document the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-25-richard.henderson@linaro.org>
This patch introduces the RISC-V Zfa extension, which introduces
additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of float register bigger than XLEN
* Quiet comparison instructions (fleq/fltq)
Zfa defines its instructions in combination with the following extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
Since QEMU does not support the RISC-V quad-precision floating-point
ISA extension (Q), this patch does not include the instructions that
depend on this extension. All other instructions are included in this
patch.
The Zfa specification can be found here:
https://github.com/riscv/riscv-isa-manual/blob/master/src/zfa.tex
The Zfa specifciation is frozen and is in public review since May 3, 2023:
https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/SED4ntBkabg
The patch also includes a TCG test for the fcvtmod.w.d instruction.
The test cases test for correct results and flag behaviour.
Note, that the Zfa specification requires fcvtmod's flag behaviour
to be identical to a fcvt with the same operands (which is also
tested).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230710071243.282464-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If we don't set a proper cbom_blocksize|cboz_blocksize in the FDT the
Linux Kernel will fail to detect the availability of the CBOM/CBOZ
extensions, regardless of the contents of the 'riscv,isa' DT prop.
The FDT is being written using the cpu->cfg.cbom|z_blocksize attributes,
so let's expose them as user properties like it is already done with
TCG.
This will also require us to determine proper blocksize values during
init() time since the FDT is already created during realize(). We'll
take a ride in kvm_riscv_init_multiext_cfg() to do it. Note that we
don't need to fetch both cbom and cboz blocksizes every time: check for
their parent extensions (icbom and icboz) and only read the blocksizes
if needed.
In contrast with cbom|z_blocksize properties from TCG, the user is not
able to set any value that is different from the 'host' value when
running KVM. KVM can be particularly harsh dealing with it: a ENOTSUPP
can be thrown for the mere attempt of executing kvm_set_one_reg() for
these 2 regs.
Hopefully we don't need to call kvm_set_one_reg() for these regs.
We'll check if the user input matches the host value in
kvm_cpu_set_cbomz_blksize(), the set() accessor for both blocksize
properties. We'll fail fast since it's already known to not be
supported.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-21-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are 2 places in which we need to get a pointer to a certain
property of the cpu->cfg struct based on property offset. Next patch
will add a couple more.
Create a helper to avoid repeating this code over and over.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're now ready to update the multi-letter extensions status for KVM.
kvm_riscv_update_cpu_cfg_isa_ext() is called called during vcpu creation
time to verify which user options changes host defaults (via the 'user_set'
flag) and tries to write them back to KVM.
Failure to commit a change to KVM is only ignored in case KVM doesn't
know about the extension (-EINVAL error code) and the user wanted to
disable the given extension. Otherwise we're going to abort the boot
process.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM-specific properties are being created inside target/riscv/kvm.c. But
at this moment we're gathering all the remaining properties from TCG and
adding them as is when running KVM. This creates a situation where
non-KVM properties are setting flags to 'true' due to its default
settings (e.g. Zawrs). Users can also freely enable them via command
line.
This doesn't impact runtime per se because KVM doesn't care about these
flags, but code such as riscv_isa_string_ext() take those flags into
account. The result is that, for a KVM guest, setting non-KVM properties
will make them appear in the riscv,isa DT.
We want to keep the same API for both TCG and KVM and at the same time,
when running KVM, forbid non-KVM extensions to be enabled internally. We
accomplish both by changing riscv_cpu_add_user_properties() to add a
mock boolean property for every non-KVM extension in
riscv_cpu_extensions[]. Then, when running KVM, users are still free to
set extensions at will, but we'll error out if a non-KVM extension is
enabled. Setting such extension to 'false' will be ignored.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_isa_string_ext() is being used by riscv_isa_string(), which is
then used by boards to retrieve the 'riscv,isa' string to be written in
the FDT. All this happens after riscv_cpu_realize(), meaning that we're
already past riscv_cpu_validate_set_extensions() and, more important,
riscv_cpu_disable_priv_spec_isa_exts().
This means that all extensions that needed to be disabled due to
priv_spec mismatch are already disabled. Checking this again during
riscv_isa_string_ext() is unneeded. Remove it.
As a bonus, riscv_isa_string_ext() can now be used with the 'host'
KVM-only CPU type since it doesn't have a env->priv_ver assigned and it
would fail this check for no good reason.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_cpu_add_user_properties() ended up with an excess of "#ifndef
CONFIG_USER_ONLY" blocks after changes that added KVM properties
handling.
KVM specific properties are required to be created earlier than their
TCG counterparts, but the remaining props can be created at any order.
Move riscv_add_satp_mode_properties() to the start of the function,
inside the !CONFIG_USER_ONLY block already present there, to remove the
last ifndef block.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Let's add KVM user properties for the multi-letter extensions that KVM
currently supports: zicbom, zicboz, zihintpause, zbb, ssaia, sstc,
svinval and svpbmt.
As with MISA extensions, we're using the KVMCPUConfig type to hold
information about the state of each extension. However, multi-letter
extensions have more cases to cover than MISA extensions, so we're
adding an extra 'supported' flag as well. This flag will reflect if a
given extension is supported by KVM, i.e. KVM knows how to handle it.
This is determined during KVM extension discovery in
kvm_riscv_init_multiext_cfg(), where we test for EINVAL errors. Any
other error will cause an abort.
The use of the 'user_set' is similar to what we already do with MISA
extensions: the flag set only if the user is changing the extension
state.
The 'supported' flag will be used later on to make an exception for
users that are disabling multi-letter extensions that are unknown to
KVM.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20230706101738.460804-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Our design philosophy with KVM properties can be resumed in two main
decisions based on KVM interface availability and what the user wants to
do:
- if the user disables an extension that the host KVM module doesn't
know about (i.e. it doesn't implement the kvm_get_one_reg() interface),
keep booting the CPU. This will avoid users having to deal with issues
with older KVM versions while disabling features they don't care;
- for any other case we're going to error out immediately. If the user
wants to enable a feature that KVM doesn't know about this a problem that
is worth aborting - the user must know that the feature wasn't enabled
in the hart. Likewise, if KVM knows about the extension, the user wants
to enable/disable it, and we fail to do it so, that's also a problem we
can't shrug it off.
In the case of MISA bits we won't even try enabling bits that aren't
already available in the host. The ioctl() is so likely to fail that
it's not worth trying. This check is already done in the previous patch,
in kvm_cpu_set_misa_ext_cfg(), thus we don't need to worry about it now.
In kvm_riscv_update_cpu_misa_ext() we'll go through every potential user
option and do as follows:
- if the user didn't set the property or set to the same value of the
host, do nothing;
- Disable the given extension in KVM. Error out if anything goes wrong.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using all TCG user properties in KVM is tricky. First because KVM
supports only a small subset of what TCG provides, so most of the
cpu->cfg flags do nothing for KVM.
Second, and more important, we don't have a way of telling if any given
value is an user input or not. For TCG this has a small impact since we
just validating everything and error out if needed. But for KVM it would
be good to know if a given value was set by the user or if it's a value
already provided by KVM. Otherwise we don't know how to handle failed
kvm_set_one_regs() when writing the configurations back.
These characteristics make it overly complicated to use the same user
facing flags for both KVM and TCG. A simpler approach is to create KVM
specific properties that have specialized logic, forking KVM and TCG use
cases for those cases only. Fully separating KVM/TCG properties is
unneeded at this point - in fact we want the user experience to be as
equal as possible, regardless of the acceleration chosen.
We'll start this fork with the MISA properties, adding the MISA bits
that the KVM driver currently supports. A new KVMCPUConfig type is
introduced. It'll hold general information about an extension. For MISA
extensions we're going to use the newly created getters of
misa_ext_infos[] to populate their name and description. 'offset' holds
the MISA bit (RVA, RVC, ...). We're calling it 'offset' instead of
'misa_bit' because this same KVMCPUConfig struct will be used to
multi-letter extensions later on.
This new type also holds a 'user_set' flag. This flag will be set when
the user set an option that's different than what is already configured
in the host, requiring KVM intervention to write the regs back during
kvm_arch_init_vcpu(). Similar mechanics will be implemented for
multi-letter extensions as well.
There is no need to duplicate more code than necessary, so we're going
to use the existing kvm_riscv_init_user_properties() to add the KVM
specific properties. Any code that is adding a TCG user prop is then
changed slightly to verify first if there's a KVM prop with the same
name already added.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Next patch will add KVM specific user properties for both MISA and
multi-letter extensions. For MISA extensions we want to make use of what
is already available in misa_ext_cfgs[] to avoid code repetition.
misa_ext_info_arr[] array will hold name and description for each MISA
extension that misa_ext_cfgs[] is declaring. We'll then use this new
array in KVM code to avoid duplicating strings. Two getters were added
to allow KVM to retrieve the 'name' and 'description' for each MISA
property.
There's nothing holding us back from doing the same with multi-letter
extensions. For now doing just with MISA extensions is enough.
It is worth documenting that even using the __bultin_ctz() directive to
populate the misa_ext_info_arr[] we are forced to assign 'name' and
'description' during runtime in riscv_cpu_add_misa_properties(). The
reason is that some Gitlab runners ('clang-user' and 'tsan-build') will
throw errors like this if we fetch 'name' and 'description' from the
array in the MISA_CFG() macro:
../target/riscv/cpu.c:1624:5: error: initializer element is not a
compile-time constant
MISA_CFG(RVA, true),
^~~~~~~~~~~~~~~~~~~
../target/riscv/cpu.c:1619:53: note: expanded from macro 'MISA_CFG'
{.name = misa_ext_info_arr[MISA_INFO_IDX(_bit)].name, \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
gcc and others compilers/builders were fine with that change. We can't
ignore failures in the Gitlab pipeline though, so code was changed to
make every runner happy.
As a side effect, misa_ext_cfg[] is no longer a 'const' array because
it must be set during runtime.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At this moment we're retrieving env->misa_ext during
kvm_arch_init_cpu(), leaving env->misa_ext_mask behind.
We want to set env->misa_ext_mask, and we want to set it as early as
possible. The reason is that we're going to use it in the validation
process of the KVM MISA properties we're going to add next. Setting it
during arch_init_cpu() is too late for user validation.
Move the code to a new helper that is going to be called during init()
time, via kvm_riscv_init_user_properties(), like we're already doing for
the machine ID properties. Set both misa_ext and misa_ext_mask to the
same value retrieved by the 'isa' config reg.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After changing user validation for mvendorid/marchid/mimpid to guarantee
that the value is validated on user input time, coupled with the work in
fetching KVM default values for them by using a scratch CPU, we're
certain that the values in cpu->cfg.(mvendorid|marchid|mimpid) are
already good to be written back to KVM.
There's no need to write the values back for 'host' type CPUs since the
values can't be changed, so let's do that just for generic CPUs.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Allow 'marchid' and 'mimpid' to also be initialized in
kvm_riscv_init_machine_ids().
After this change, the handling of mvendorid/marchid/mimpid for the
'host' CPU type will be equal to what we already have for TCG named
CPUs, i.e. the user is not able to set these values to a different val
than the one that is already preset.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Certain validations, such as the validations done for the machine IDs
(mvendorid/marchid/mimpid), are done before starting the CPU.
Non-dynamic (named) CPUs tries to match user input with a preset
default. As it is today we can't prefetch a KVM default for these cases
because we're only able to read/write KVM regs after the vcpu is
spinning.
Our target/arm friends use a concept called "scratch CPU", which
consists of creating a vcpu for doing queries and validations and so on,
which is discarded shortly after use [1]. This is a suitable solution
for what we need so let's implement it in target/riscv as well.
kvm_riscv_init_machine_ids() will be used to do any pre-launch setup for
KVM CPUs, via riscv_cpu_add_user_properties(). The function will create
a KVM scratch CPU, fetch KVM regs that work as default values for user
properties, and then discard the scratch CPU afterwards.
We're starting by initializing 'mvendorid'. This concept will be used to
init other KVM specific properties in the next patches as well.
[1] target/arm/kvm.c, kvm_arm_create_scratch_host_vcpu()
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'marchid' shouldn't be set to a different value as previously set for
named CPUs.
For all other CPUs it shouldn't be freely set either - the spec requires
that 'marchid' can't have the MSB (most significant bit) set and every
other bit set to zero, i.e. 0x80000000 is an invalid 'marchid' value for
32 bit CPUs.
As with 'mimpid', setting a default value based on the current QEMU
version is not a good idea because it implies that the CPU
implementation changes from one QEMU version to the other. Named CPUs
should set 'marchid' to a meaningful value instead, and generic CPUs can
set to any valid value.
For the 'veyron-v1' CPU this is the error thrown if 'marchid' is set to
a different val:
$ ./build/qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,marchid=0x80000000
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.marchid=0x80000000:
Unable to change veyron-v1-riscv-cpu marchid (0x8000000000010000)
And, for generics CPUs, this is the error when trying to set to an
invalid val:
$ ./build/qemu-system-riscv64 -M virt -nographic -cpu rv64,marchid=0x8000000000000000
qemu-system-riscv64: can't apply global rv64-riscv-cpu.marchid=0x8000000000000000:
Unable to set marchid with MSB (64) bit set and the remaining bits zero
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Following the same logic used with 'mvendorid' let's also restrict
'mimpid' for named CPUs. Generic CPUs keep setting the value freely.
Note that we're getting rid of the default RISCV_CPU_MARCHID value. The
reason is that this is not a good default since it's dynamic, changing
with with every QEMU version, regardless of whether the actual
implementation of the CPU changed from one QEMU version to the other.
Named CPU should set it to a meaningful value instead and generic CPUs
can set whatever they want.
This is the error thrown for an invalid 'mimpid' value for the veyron-v1
CPU:
$ ./qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,mimpid=2
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.mimpid=2:
Unable to change veyron-v1-riscv-cpu mimpid (0x111)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're going to change the handling of mvendorid/marchid/mimpid by the
KVM driver. Since these are always present in all CPUs let's put the
same validation for everyone.
It doesn't make sense to allow 'mvendorid' to be different than it
is already set in named (vendor) CPUs. Generic (dynamic) CPUs can have
any 'mvendorid' they want.
Change 'mvendorid' to be a class property created via
'object_class_property_add', instead of using the DEFINE_PROP_UINT32()
macro. This allow us to define a custom setter for it that will verify,
for named CPUs, if mvendorid is different than it is already set by the
CPU. This is the error thrown for the 'veyron-v1' CPU if 'mvendorid' is
set to an invalid value:
$ qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,mvendorid=2
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.mvendorid=2:
Unable to change veyron-v1-riscv-cpu mvendorid (0x61f)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As it is today it's not possible to use '-cpu host' if the RISC-V host
has RVH enabled. This is the resulting error:
$ ./qemu/build/qemu-system-riscv64 \
-machine virt,accel=kvm -m 2G -smp 1 \
-nographic -snapshot -kernel ./guest_imgs/Image \
-initrd ./guest_imgs/rootfs_kvm_riscv64.img \
-append "earlycon=sbi root=/dev/ram rw" \
-cpu host
qemu-system-riscv64: H extension requires priv spec 1.12.0
This happens because we're checking for priv spec for all CPUs, and
since we're not setting env->priv_ver for the 'host' CPU, it's being
default to zero (i.e. PRIV_SPEC_1_10_0).
In reality env->priv_ver does not make sense when running with the KVM
'host' CPU. It's used to gate certain CSRs/extensions during translation
to make them unavailable if the hart declares an older spec version. It
doesn't have any other use. E.g. OpenSBI version 1.2 retrieves the spec
checking if the CSR_MCOUNTEREN, CSR_MCOUNTINHIBIT and CSR_MENVCFG CSRs
are available [1].
'priv_ver' is just one example. We're doing a lot of feature validation
and setup during riscv_cpu_realize() that it doesn't apply to KVM CPUs.
Validating the feature set for those CPUs is a KVM problem that should
be handled in KVM specific code.
The new riscv_cpu_realize_tcg() helper contains all validation logic that
are applicable to TCG CPUs only. riscv_cpu_realize() verifies if we're
running TCG and, if it's the case, proceed with the usual TCG realize()
logic.
[1] lib/sbi/sbi_hart.c, hart_detect_features()
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Should set/get riscv all reg timer,i.e, time/compare/frequency/state.
Signed-off-by: Yang Zhang <yang.zhang@hexintek.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1688
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230707032306.4606-1-gaoshanliukou@163.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The privileged spec states:
For a memory access made to support VS-stage address translation (such as
to read/write a VS-level page table), permissions are checked as though
for a load or store, not for the original access type. However, any
exception is always reported for the original access type (instruction,
load, or store/AMO).
The current implementation converts the access type to LOAD if implicit
G-stage translation fails which results in only reporting "Load guest-page
fault". This commit removes the convertion of access type, so the reported
exception conforms to the spec.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627074915.7686-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230615063302.102409-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add trans_* and helper function for Zvfbfwma instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add trans_* and helper function for Zvfbfmin instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add trans_* and helper function for Zfbfmin instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Print RvV extension register to log if VPU option is enabled.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230629083730.386604-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Pointer mask is also affected by MPRV which means cur_pmbase/pmmask
should also take MPRV into consideration. As pointer mask for instruction
is not supported currently, so we can directly update cur_pmbase/pmmask
based on address related mode and xlen affected by MPRV now.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230614032547.35895-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As specified in privilege spec:"When MPRV=1, load and store memory
addresses are treated as though the current XLEN were set to MPP’s
XLEN". So the xlen for address may be different from current xlen.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230614032547.35895-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 7f0bdfb5bf ("target/riscv/cpu.c: remove cfg setup from
riscv_cpu_init()") removed code that was enabling mmu, pmp, ext_ifencei
and ext_icsr from riscv_cpu_init(), the init() function of
TYPE_RISCV_CPU, parent type of all RISC-V CPUss. This was done to force
CPUs to explictly enable all extensions and features it requires,
without any 'magic values' that were inherited by the parent type.
This commit failed to make appropriate changes in the 'veyron-v1' CPU,
added earlier by commit e1d084a852. The result is that the veyron-v1
CPU has ext_ifencei, ext_icsr and pmp set to 'false', which is not the
case.
The reason why it took this long to notice (thanks LIU Zhiwei for
reporting it) is because Linux doesn't mind 'ifencei' and 'icsr' being
absent in the 'riscv,isa' DT, implying that they're both present if the
'i' extension is enabled. OpenSBI also doesn't error out or warns about
the lack of 'pmp', it'll just not protect memory pages.
Fix it by setting them to 'true' in rv64_veyron_v1_cpu_init() like
7f0bdfb5bf already did with other CPUs.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Fixes: 7f0bdfb5bf ("target/riscv/cpu.c: remove cfg setup from riscv_cpu_init()")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230620152443.137079-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SXL is initialized as env->misa_mxl which is also the mxl value.
So we can just remain it unchanged to keep it read-only.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
MPV and GVA bits are added by hypervisor extension to mstatus
and mstatush (if MXLEN=32).
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upon MRET or explicit memory access with MPRV=1, MPV should be ignored
when MPP=PRV_M.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Support for emulating XThead* instruction has been added recently.
This patch adds support for these instructions to the RISC-V disassembler.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-9-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch moves the extension test functions that are used
to gate vendor extension decoders, into cpu_cfg.h.
This allows to reuse them in the disassembler.
This patch does not introduce new functionality.
However, the patch includes a small change:
The parameter for the extension test functions has been changed
from 'DisasContext*' to 'const RISCVCPUConfig*' to keep
the code in cpu_cfg.h self-contained.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230612111034.3955227-3-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Disassemble function(plugin_disas, target_disas, monitor_disas) will
always call set_disas_info before disassembling instructions.
plugin_disas and target_disas will always be called under a TB, which
has the same XLEN.
We can't ensure that monitor_disas will always be called under a TB,
but current XLEN will still be a better choice, thus we can ensure at
least the disassemble of the nearest one TB is right.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-2-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This implements the AES64DSM instruction. This was the last use
of aes64_operation and its support macros, so remove them all.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64ESM instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64IM instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64DS instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64ES instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These fields shouldn't be accessed when KVM is not available.
Restrict the KVM timer migration state. Rename the KVM timer
post_load() handler accordingly, because cpu_post_load() is
too generic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230626232007.8933-3-philmd@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On an address match, skip checking for default permissions and return error
based on access defined in PMP configuration.
v3 Changes:
o Removed explicit return of boolean value from comparision
of priv/allowed_priv
v2 Changes:
o Removed goto to return in place when address matches
o Call pmp_hart_has_privs_default at the end of the loop
Fixes: 90b1fafce0 ("target/riscv: Smepmp: Skip applying default rules when address matches")
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230605164548.715336-1-hchauhan@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 752614cab8 ("target/riscv: rvv: Add tail agnostic for vector
load / store instructions") added an extra check for LMUL fragmentation,
intended for setting the "rest tail elements" in the last register for a
segment load insn.
Actually, the max_elements derived in vext_ld*() won't be a fraction of
vector register size, since the lmul encoded in desc is emul, which has
already been adjusted to 1 for LMUL fragmentation case by vext_get_emul()
in trans_rvv.c.inc, for ld_stride(), ld_us(), ld_index() and ldff().
Besides, vext_get_emul() has also taken EEW/SEW into consideration, so no
need to call vext_get_total_elems() which would base on the emul to derive
another emul, the second emul would be incorrect when esz differs from sew.
Thus this patch removes the check for extra tail elements.
Fixes: 752614cab8 ("target/riscv: rvv: Add tail agnostic for vector load / store instructions")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230607091646.4049428-1-xiao.w.wang@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There's no code using MTYPE, which was a concept used in older vector
implementation.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230608053517.4102648-1-xiao.w.wang@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We initialize cur_pmmask as -1(UINT32_MAX/UINT64_MAX) and regard it
as if pointer mask is disabled in current implementation. However,
the addresses for vector load/store will be adjusted to zero in this
case and -1(UINT32_MAX/UINT64_MAX) is valid value for pmmask when
pointer mask is enabled.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230610094651.43786-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
pc_succ_insn is no longer useful after the introduce of cur_insn_len
and all pc related value use diff value instead of absolute value.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-8-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a base pc_save for PC-relative translation(CF_PCREL).
Diable the directly sync pc from tb by riscv_cpu_synchronize_from_tb.
Use gen_pc_plus_diff to get the pc-relative address.
Enable CF_PCREL in System mode.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reduce reliance on absolute values by using true pc difference for
gen_pc_plus_diff() to prepare for PC-relative translation.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reduce reliance on absolute values(by passing pc difference) to
prepare for PC-relative translation.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reduce reliance on absolute value to prepare for PC-relative translation.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use cur_insn_len to store the length of the current instruction to
prepare for PC-relative translation.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Compute the target address before storing it into badaddr
when mis-aligned exception is triggered.
Use a target_pc temp to store the target address to avoid
the confusing operation that udpate target address into
cpu_pc before misalign check, then update it into badaddr
and restore cpu_pc to current pc if exception is triggered.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Pass RISCVCPUConfig as disassemble_info.target_info to support disas
of conflict instructions related to specific extensions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Split RISCVCPUConfig declarations to prepare for passing it to disas.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230523093539.203909-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add knobs to allow users to enable smstateen and also export it via the
ISA extension string.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230518175058.2772506-4-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When misa.F is 0 tb->flags.FS field is unused and can be used to save
the current state of smstateen0.FCSR check which is needed by the
floating point translation routines.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230518175058.2772506-3-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implement the s/h/mstateen.fcsr bit as defined in the smstateen spec
and check for it when accessing the fcsr register and its fields.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230518175058.2772506-2-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
write_mstatus() can only change current xl when in debug mode.
And we need update cur_pmmask/base in this case.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230524015933.17349-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Access will fail if access is partially inside the PMP entry.
However,only setting ret = false doesn't really mean pmp violation
since pmp_hart_has_privs_default() may return true at the end of
pmp_hart_has_privs().
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-13-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use pmp_update_rule_addr() and pmp_update_rule_nums() separately to
update rule nums only once for each pmpcfg_csr_write. Then remove
pmp_update_rule() since it become unused.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-12-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
TLB needn't be flushed when pmpcfg/pmpaddr don't changes.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230517091519.34439-11-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
TLB should be flushed not only for pmpcfg csr changes, but also for
pmpaddr csr changes.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230517091519.34439-10-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently only the rule addr of the same index of pmpaddr is updated
when pmpaddr CSR is modified. However, the rule addr of next PMP entry
may also be affected if its A field is PMP_AMATCH_TOR. So we should
also update it in this case.
Write to pmpaddr CSR will not affect the rule nums, So we needn't update
call pmp_update_rule_nums() in pmpaddr_csr_write().
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-9-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
MMWP and MML bits may affect the allowed privs of PMP entries and the
default privs, both of which may change the allowed privs of exsited
TLB entries. So we need flush TLB when they are changed.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-8-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The addr and size parameters in pmp_hart_has_privs_default() are unused.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RLB/MML/MMWP bits in mseccfg CSR are introduced by Smepmp extension.
So they can only be writable and set to 1s when cfg.epmp is true.
Then we also need't check on epmp in pmp_hart_has_privs_default().
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We no longer need the pmp_index for matched PMP entry now.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Return the result directly for short cut, since We needn't do the
following check on the PMP entries if there is no PMP rules.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
pmp_get_tlb_size can be separated from get_physical_address_pmp and is only
needed when ret == TRANSLATE_SUCCESS.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
PMP entries before (including) the matched PMP entry may only cover partial
of the TLB page, and this may split the page into regions with different
permissions. Such as for PMP0 (0x80000008~0x8000000F, R) and PMP1 (0x80000000~
0x80000FFF, RWX), write access to 0x80000000 will match PMP1. However we cannot
cache the translation result in the TLB since this will make the write access
to 0x80000008 bypass the check of PMP0. So we should check all of them instead
of the matched PMP entry in pmp_get_tlb_size() and set the tlb_size to 1 in
this case.
Set tlb_size to TARGET_PAGE_SIZE if PMP is not support or there is no PMP rules.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
write_misa() must use as much common logic as possible. We want to open
code just the bits that are exclusive to the CSR write operation and TCG
internals.
Our validation is done with riscv_cpu_validate_set_extensions(), but we
need a small tweak first. When enabling RVG we're doing:
env->misa_ext |= RVI | RVM | RVA | RVF | RVD;
env->misa_ext_mask = env->misa_ext;
This works fine for realize() time but this can potentially overwrite
env->misa_ext_mask if we reutilize the function for write_misa().
Instead of doing misa_ext_mask = misa_ext, sum up the RVG extensions in
misa_ext_mask as well. This won't change realize() time behavior
(misa_ext_mask will be == misa_ext) and will ensure that write_misa()
won't change misa_ext_mask by accident.
After that, rewrite write_misa() to work as follows:
- mask the write using misa_ext_mask to avoid enabling unsupported
extensions;
- suppress RVC if the next insn isn't aligned;
- disable RVG if any of RVG dependencies are being disabled by the user;
- assign env->misa_ext and run riscv_cpu_validate_set_extensions(). On
error, rollback env->misa_ext to its original value, logging a
GUEST_ERROR to inform the user about the failed write;
- handle RVF and MSTATUS_FS and continue as usual.
Let's keep write_misa() as experimental for now until this logic gains
enough mileage.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230517135714.211809-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have 4 config settings being done in riscv_cpu_init(): ext_ifencei,
ext_icsr, mmu and pmp. This is also the constructor of the "riscv-cpu"
device, which happens to be the parent device of every RISC-V cpu.
The result is that these 4 configs are being set every time, and every
other CPU should always account for them. CPUs such as sifive_e need to
disable settings that aren't enabled simply because the parent class
happens to be enabling it.
Moving all configurations from the parent class to each CPU will
centralize the config of each CPU into its own init(), which is clearer
than having to account to whatever happens to be set in the parent
device. These settings are also being set in register_cpu_props() when
no 'misa_ext' is set, so for these CPUs we don't need changes. Named
CPUs will receive all cfgs that the parent were setting into their
init().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is no need to init timers if we're not even sure that our
extensions are valid. Execute riscv_cpu_validate_set_extensions() before
riscv_timer_init().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Let's remove more code that is open coded in riscv_cpu_realize() and put
it into a helper. Let's also add an error message instead of just
asserting out if env->misa_mxl_max != env->misa_mlx.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're doing env->priv_spec validation and assignment at the start of
riscv_cpu_realize(), which is fine, but then we're doing a force disable
on extensions that aren't compatible with the priv version.
This second step is being done too early. The disabled extensions might be
re-enabled again in riscv_cpu_validate_set_extensions() by accident. A
better place to put this code is at the end of
riscv_cpu_validate_set_extensions() after all the validations are
completed.
Add a new helper, riscv_cpu_disable_priv_spec_isa_exts(), to disable the
extesions after the validation is done. While we're at it, create a
riscv_cpu_validate_priv_spec() helper to host all env->priv_spec related
validation to unclog riscv_cpu_realize a bit.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Even though Zca/Zcf/Zcd can be included by C/F/D, however, their priv
version is higher than the priv version of C/F/D. So if we use check
for them instead of check for C/F/D totally, it will trigger new
problem when we try to disable the extensions based on the configured
priv version.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using implicitly enabled extensions such as Zca/Zcf/Zcd instead of their
super extensions can simplify the extension related check. However, they
may have higher priv version than their super extensions. So we should mask
them in the isa_string based on priv version to make them invisible to user
if the specified priv version is lower than their minimal priv version.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All these generic CPUs are using the latest priv available, at this
moment PRIV_VERSION_1_12_0:
- riscv_any_cpu_init()
- rv32_base_cpu_init()
- rv64_base_cpu_init()
- rv128_base_cpu_init()
Create a new PRIV_VERSION_LATEST enum and use it in those cases. I'll
make it easier to update everything at once when a new priv version is
available.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The setter is doing nothing special. Just set env->priv_ver directly.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This setter is doing nothing else but setting env->vext_ver. Assign the
value directly.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RVV verification will error out if fails and it's being done at the
end of riscv_cpu_validate_set_extensions(), after we've already set some
extensions that are dependent on RVV. Let's put it in its own function
and do it earlier.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zc* extensions (version 1.0) are ratified.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230510030040.20528-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The function is a no-op if 'vta' is zero but we're still doing a lot of
stuff in this function regardless. vext_set_elems_1s() will ignore every
single time (since vta is zero) and we just wasted time.
Skip it altogether in this case. Aside from the code simplification
there's a noticeable emulation performance gain by doing it. For a
regular C binary that does a vectors operation like this:
=======
#define SZ 10000000
int main ()
{
int *a = malloc (SZ * sizeof (int));
int *b = malloc (SZ * sizeof (int));
int *c = malloc (SZ * sizeof (int));
for (int i = 0; i < SZ; i++)
c[i] = a[i] + b[i];
return c[SZ - 1];
}
=======
Emulating it with qemu-riscv64 and RVV takes ~0.3 sec:
$ time ~/work/qemu/build/qemu-riscv64 \
-cpu rv64,debug=false,vext_spec=v1.0,v=true,vlen=128 ./foo.out
real 0m0.303s
user 0m0.281s
sys 0m0.023s
With this skip we take ~0.275 sec:
$ time ~/work/qemu/build/qemu-riscv64 \
-cpu rv64,debug=false,vext_spec=v1.0,v=true,vlen=128 ./foo.out
real 0m0.274s
user 0m0.252s
sys 0m0.019s
This performance gain adds up fast when executing heavy benchmarks like
SPEC.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230427205708.246679-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move a use of TARGET_LONG_BITS out of tcg/tcg.h.
Include the new file only where required.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a virtual CPU for Ventana's first CPU named veyron-v1. It runs
exclusively for the rv64 target. It's tested with the 'virt' board.
CPU specs and general information can be found here:
https://www.nextplatform.com/2023/02/02/the-first-risc-v-shot-across-the-datacenter-bow/
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230418123624.16414-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the specification, in 64-bit, if any of the pte reserved bits
60-54 is set an exception should be triggered (see 4.4.1, "Addressing and
Memory Protection"). In addition, we must check the napot/pbmt bits are
not set if those extensions are not active.
Reported-by: Andrea Parri <andrea@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230420150220.60919-1-alexghiti@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Before changing the flow check for sv39/48/57.
According to specification (for Supervisor mode):
Sv39 implementations support a 39-bit virtual address space, divided into 4 KiB
pages.
Instruction fetch addresses and load and store effective addresses, which are
64 bits,
must have bits 63–39 all equal to bit 38, or else a page-fault exception will
occur.
Likewise for Sv48 and Sv57.
So the high bits are equal to bit 38 for sv39.
According to specification (for Hypervisor mode):
For Sv39x4, address bits of the guest physical address 63:41 must all be zeros,
or else a
guest-page-fault exception occurs.
Likewise for Sv48x4 and Sv57x4.
For Sv48x4 address bits 63:50 must all be zeros, or else a guest-page-fault
exception occurs.
For Sv57x4 address bits 63:59 must all be zeros, or else a guest-page-fault
exception occurs.
For example we are trying to access address 0xffff_ffff_ff01_0000 with only
G-translation enabled.
So expected behavior is to generate exception. But qemu doesn't generate such
exception.
For the old check, we get
va_bits == 41, mask == (1 << 24) - 1, masked_msbs == (0xffff_ffff_ff01_0000 >>
40) & mask == mask.
Accordingly, the condition masked_msbs != 0 && masked_msbs != mask is not
fulfilled
and the check passes.
Signed-off-by: Irina Ryapolova <irina.ryapolova@syntacore.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230418075423.26217-1-irina.ryapolova@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When reading a non-existent CSR QEMU should raise illegal instruction
exception, but currently it just exits due to the g_assert() check.
This actually reverts commit 0ee342256a.
Some comments are also added to indicate that predicate() must be
provided for an implemented CSR.
Reported-by: Fei Wu <fei2.wu@intel.com>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230417043054.3125614-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This new abstract type will be used to differentiate between static and
non-static CPUs in query-cpu-definitions.
All generic CPUs were changed to be of this type. Named CPUs are kept as
TYPE_RISCV_CPU and will still be considered static.
This is the output of query-cpu-definitions after this change for the
riscv64 target:
$ ./build/qemu-system-riscv64 -S -M virt -display none -qmp stdio
{"QMP": {"version": (...)}
{"execute": "qmp_capabilities", "arguments": {"enable": ["oob"]}}
{"return": {}}
{"execute": "query-cpu-definitions"}
{"return": [
{"name": "rv64", "typename": "rv64-riscv-cpu", "static": false, "deprecated": false},
{"name": "sifive-e51", "typename": "sifive-e51-riscv-cpu", "static": true, "deprecated": false},
{"name": "any", "typename": "any-riscv-cpu", "static": false, "deprecated": false},
{"name": "x-rv128", "typename": "x-rv128-riscv-cpu", "static": false, "deprecated": false},
{"name": "shakti-c", "typename": "shakti-c-riscv-cpu", "static": true, "deprecated": false},
{"name": "thead-c906", "typename": "thead-c906-riscv-cpu", "static": true, "deprecated": false},
{"name": "sifive-u54", "typename": "sifive-u54-riscv-cpu", "static": true, "deprecated": false}
]}
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230411183511.189632-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This command is used by tooling like libvirt to retrieve a list of
supported CPUs. Each entry returns a CpuDefinitionInfo object that
contains more information about each CPU.
This initial support includes only the name of the CPU and its typename.
Here's what the command produces for the riscv64 target:
$ ./build/qemu-system-riscv64 -S -M virt -display none -qmp stdio
{"QMP": {"version": (...)}
{"execute": "qmp_capabilities", "arguments": {"enable": ["oob"]}}
{"return": {}}
{"execute": "query-cpu-definitions"}
{"return": [
{"name": "rv64", "typename": "rv64-riscv-cpu", "static": false, "deprecated": false},
{"name": "sifive-e51", "typename": "sifive-e51-riscv-cpu", "static": false, "deprecated": false},
{"name": "any", "typename": "any-riscv-cpu", "static": false, "deprecated": false},
{"name": "x-rv128", "typename": "x-rv128-riscv-cpu", "static": false, "deprecated": false},
{"name": "shakti-c", "typename": "shakti-c-riscv-cpu", "static": false, "deprecated": false},
{"name": "thead-c906", "typename": "thead-c906-riscv-cpu", "static": false, "deprecated": false},
{"name": "sifive-u54", "typename": "sifive-u54-riscv-cpu", "static": false, "deprecated": false}]
}
Next patch will introduce a way to tell whether a given CPU is static or
not.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230411183511.189632-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QMP CPU commands are usually implemented by a separated file,
<arch>-qmp-cmds.c, to allow them to be build only for softmmu targets.
This file uses a CPU QOM header with basic QOM declarations for the
arch.
We'll introduce query-cpu-definitions for RISC-V CPUs in the next patch,
but first we need a cpu-qom.h header with the definitions of
TYPE_RISCV_CPU and RISCVCPUClass declarations. These were moved from
cpu.h to the new file, and cpu.h now includes "cpu-qom.h".
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230411183511.189632-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implement this by adjusting prot, which reduces the set of
checks required. This prevents exec to be set for U pages
in MMUIdx_S_SUM. While it had been technically incorrect,
it did not manifest as a bug, because we will never attempt
to execute from MMUIdx_S_SUM.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-26-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-26-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We were effectively computing the protection bits twice,
once while performing access checks and once while returning
the valid bits to the caller. Reorg so we do this once.
Move the computation of mxr close to its single use.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-25-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-25-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-24-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-24-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If we want to give the debugger a greater view of memory than
the cpu, we should simply disable the access check entirely,
not simply for this one corner case.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-23-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-23-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The debugger should not modify PTE_A or PTE_D.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-22-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-22-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the code that never loops outside of the loop.
Unchain the if-return-else statements.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-21-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-21-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These values are constant for every level of pte lookup.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-20-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-20-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the check from the top of get_physical_address to
the two callers, where passing mmu_idx makes no sense.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-19-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-19-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Table 9.5 "Effect of MPRV..." specifies that MPV=1 uses VS-level
vsstatus.SUM instead of HS-level sstatus.SUM.
For HLV/HSV instructions, the HS-level register does not apply, but
the VS-level register presumably does, though this is not mentioned
explicitly in the manual. However, it matches the behavior for MPV.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-18-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-18-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Incorporate the virt_enabled and MPV checks into the cpu_mmu_index
function, so we don't have to keep doing it within tlb_fill and
subroutines. This also elides a flush on changes to MPV.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-17-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-17-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current cpu_mmu_index value is really irrelevant to
the HLV/HSV lookup. Provide the correct priv level directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-16-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-16-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move and rename riscv_cpu_two_stage_lookup, to match
the other mmuidx_* functions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-15-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-15-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the priv level encoded into the mmu_idx, rather than
starting from env->priv. We have already checked MPRV+MPP
in riscv_cpu_mmu_index -- no need to repeat that.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-14-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-14-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In get_physical_address, we should use the setting passed
via mmu_idx rather than checking env->mstatus directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-13-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-13-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We will enable more uses of this bit in the future.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-12-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-12-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implement these instructions via helpers, in expectation
of determining the mmu_idx to use at runtime. This allows
the permission check to also be moved out of line, which
allows HLSX to be removed from TB_FLAGS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the new functions to properly check execute permission
for the read rather than read permission.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-10-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-10-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Kernel needs to access user mode memory e.g. during syscalls, the window
is usually opened up for a very limited time through MSTATUS.SUM, the
overhead is too much if tlb_flush() gets called for every SUM change.
This patch creates a separate MMU index for S+SUM, so that it's not
necessary to flush tlb anymore when SUM changes. This is similar to how
ARM handles Privileged Access Never (PAN).
Result of 'pipe 10' from unixbench boosts from 223656 to 1705006. Many
other syscalls benefit a lot from this too.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Message-Id: <20230324054154.414846-3-fei2.wu@intel.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-8-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-8-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently it's assumed the 2 low bits of mmu_idx map to privilege mode,
this assumption won't last as we are about to add more mmu_idx. Here an
individual priv field is added into TB_FLAGS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Message-Id: <20230324054154.414846-2-fei2.wu@intel.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-7-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-7-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Once we mistook the vstart directly from the env->vstart. As env->vstart is not
a constant, we should record it in the tb flags if we want to use
it in translation.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230324143031.1093-5-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-6-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-6-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Merge with mstatus_{fs,vs}. We might perform a redundant
assignment to one or the other field, but it's a trivial
and saves 4 bits from TB_FLAGS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-5-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-5-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reuse the MSTATUS_FS and MSTATUS_VS for the tb flags positions is not a
normal way.
It will make it hard to change the tb flags layout. And even worse, if we
want to keep tb flags for a same extension togather without a hole.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230324143031.1093-4-zhiwei_liu@linux.alibaba.com>
[rth: Adjust trans_rvf.c.inc as well; use the typedef]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-4-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-4-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The pointer masking is the only extension that directly use status.
The vector or float extension uses the status in an indirect way.
Replace the pointer masking extension special status fields with
the general status.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230324143031.1093-3-zhiwei_liu@linux.alibaba.com>
[rth: Add a typedef for the enum]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-3-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Virt enabled state is not a constant, so we should put it into tb flags.
Thus we can use it like a constant condition at translation phase.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230324143031.1093-2-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-2-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- Trap satp/hgatp accesses from HS-mode when MSTATUS.TVM is enabled.
- Trap satp accesses from VS-mode when HSTATUS.VTVM is enabled.
- Raise RISCV_EXCP_ILLEGAL_INST when U-mode executes SFENCE.VMA/SINVAL.VMA.
- Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes
SFENCE.VMA/SINVAL.VMA or VS-mode executes SFENCE.VMA/SINVAL.VMA with
HSTATUS.VTVM enabled.
- Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes
HFENCE.GVMA/HFENCE.VVMA/HINVAL.GVMA/HINVAL.VVMA.
Signed-off-by: Yi Chen <chenyi2000@zju.edu.cn>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406101559.39632-1-chenyi2000@zju.edu.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zdinx/Zhinx{min} require Zfinx. And require relationship is usually done
by check currently.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230408135908.25269-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
mstatus.MPP field is a WARL field since priv version 1.11, so we
remain it unchanged if an invalid value is written into it. And
after this, RVH shouldn't be passed to riscv_cpu_set_mode().
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230407014743.18779-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
PRV_H has no real meaning, but just a reserved privilege mode currently.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230407014743.18779-3-liweiwei@iscas.ac.cn>
[ Changes by AF:
- Convert one missing use of PRV_H
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The MPP will be set to the least-privileged supported mode (U if
U-mode is implemented, else M).
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230407014743.18779-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The function is now a no-op for all cpu_init() callers that are setting
a non-zero misa value in set_misa(), since it's no longer used to sync
cpu->cfg props with env->misa_ext bits. Remove it in those cases.
While we're at it, rename the function to match what it's actually
doing: create user properties to set/remove CPU extensions. Make a note
that it will overwrite env->misa_ext with the defaults set by each user
property.
Update the MISA bits comment in cpu.h as well.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-21-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're still have one RISCVCPUConfig MISA flag, 'ext_g'. We'll remove it
the same way we did with the others: create a "g" RISCVCPUMisaExtConfig
property, remove the old "g" property, remove all instances of 'cfg.ext_g'
and use riscv_has_ext(env, RVG).
The caveat is that we don't have RVG, so add it. RVG will be used right
off the bat in set_misa() of rv64_thead_c906_cpu_init() because the CPU is
enabling G via the now removed 'ext_g' flag.
After this patch, there are no more MISA extensions represented by flags
in RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This CPU is enabling G via cfg.ext_g and, at the same time, setting
IMAFD in set_misa() and cfg.ext_icsr.
riscv_cpu_validate_set_extensions() is already doing that, so there's no
need for cpu_init() setups to worry about setting G and its extensions.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This function was created to move the sync between cpu->cfg.ext_N bit
changes to env->misa_ext* from the validation step to an ealier step,
giving us a guarantee that we could use either cpu->cfg.ext_N or
riscv_has_ext(env,N) in the validation.
We don't have any cpu->cfg.ext_N left that has an existing MISA bit
(cfg.ext_g will be handled shortly). The function is now a no-op, simply
copying the existing values of misa_ext* back to misa_ext*.
Remove it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "v" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVV. Instances of cpu->cfg.ext_v and similar are
replaced with riscv_has_ext(env, RVV).
Remove the old "v" property and 'ext_v' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "j" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVJ. Instances of cpu->cfg.ext_j and similar are
replaced with riscv_has_ext(env, RVJ).
Remove the old "j" property and 'ext_j' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "h" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVH. Instances of cpu->cfg.ext_h and similar are
replaced with riscv_has_ext(env, RVH).
Remove the old "h" property and 'ext_h' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "u" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVU. Instances of cpu->cfg.ext_u and similar are
replaced with riscv_has_ext(env, RVU).
Remove the old "u" property and 'ext_u' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "s" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVS. Instances of cpu->cfg.ext_s and similar are
replaced with riscv_has_ext(env, RVS).
Remove the old "s" property and 'ext_s' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "m" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVM. Instances of cpu->cfg.ext_m and similar are
replaced with riscv_has_ext(env, RVM).
Remove the old "m" property and 'ext_m' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "e" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVE. Instances of cpu->cfg.ext_e and similar are
replaced with riscv_has_ext(env, RVE).
Remove the old "e" property and 'ext_e' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "i" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVI. Instances of cpu->cfg.ext_i and similar are
replaced with riscv_has_ext(env, RVI).
Remove the old "i" property and 'ext_i' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "f" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVF. Instances of cpu->cfg.ext_f and similar are
replaced with riscv_has_ext(env, RVF).
Remove the old "f" property and 'ext_f' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "d" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVD. Instances of cpu->cfg.ext_d and similar are
replaced with riscv_has_ext(env, RVD).
Remove the old "d" property and 'ext_d' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "c" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVC. Instances of cpu->cfg.ext_c and similar are
replaced with riscv_has_ext(env, RVC).
Remove the old "c" property and 'ext_c' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "a" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVA. Instances of cpu->cfg.ext_a and similar are
replaced with riscv_has_ext(env, RVA).
Remove the old "a" property and 'ext_a' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
