Commit Graph

964 Commits

Author SHA1 Message Date
Aleksandar Markovic
5122958258 target/mips: Fix emulation of MSA pack instructions on big endian hosts
Fix emulation of MSA pack instructions on big endian hosts.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1563812573-30309-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-22 19:33:09 +02:00
Aleksandar Markovic
45152d0502 target/mips: Add 'fall through' comments for handling nanoMips' SHXS, SWXS
This was found by GCC 8.3 static analysis.

Missed in commit fb32f8c856.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1563812573-30309-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-22 19:33:04 +02:00
Aleksandar Markovic
0d0304f2c4 target/mips: Add missing 'break' for certain cases of MTTR handling
This was found by GCC 8.3 static analysis.

Fixes: ead9360e2f

Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1563220847-14630-5-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-15 22:22:05 +02:00
Aleksandar Markovic
f1fadbb27a target/mips: Add missing 'break' for certain cases of MFTR handling
This was found by GCC 8.3 static analysis.

Fixes: ead9360e2f

Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1563220847-14630-4-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-15 22:22:01 +02:00
Aleksandar Markovic
ab8c34105a target/mips: Add missing 'break' for a case of MTHC0 handling
This was found by GCC 8.3 static analysis.

Fixes: 5fb2dcd179

Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1563220847-14630-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-15 22:21:56 +02:00
Peter Maydell
c204e342e8 MIPS queue for July 2nd, 2019
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdG4G5AAoJENSXKoln91plV1UH/0pnDNiBR0AKu3cqY6fYuPMI
 9cyh/z5KSW11+KuXjh0t73fzDPL34z6jXoZU681yLU2IppyN0OXOKduKjFxzwU1Z
 rwLvTmXfHlvLGj66GJIhzBFKYCsRlJ6ZeLjUTFCjEUofww8z6LWaOEXvjo0qS1db
 Kx0bZtNpIhNnNCFukxjU2qMUpH/Gk17UvC4F9v5882QpXJAUsPhv/lb9nSfx7Fve
 xiyiFk6cYUdmErvwUwNWhuFeZGKaAOfnBMcJEX5u28C82tyRT4D/cc1gM8OivVPO
 enDDLMqch/8hTdxXvm1TI7FSS4445noRhfzuu1IErrnOXwRS3KGHoi0LyM1wAZ8=
 =qMlD
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jul-02-2019' into staging

MIPS queue for July 2nd, 2019

# gpg: Signature made Tue 02 Jul 2019 17:09:29 BST
# gpg:                using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01  DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-queue-jul-02-2019:
  target/mips: Correct helper for MSA FCLASS.<W|D> instructions
  target/mips: Unroll loops for MSA float max/min instructions
  target/mips: Correct comments in msa_helper.c
  target/mips: Correct comments in translate.c
  tcg/tests: target/mips: Correct MSA test compilation and execution order
  tcg/tests: target/mips: Amend MSA integer multiply tests
  tcg/tests: target/mips: Amend MSA fixed point multiply tests
  hw/mips: Express dependencies of the r4k platform with Kconfig
  hw/mips: Express dependencies of the Jazz machine with Kconfig
  hw/mips: Express dependencies of the MIPSsim machine with Kconfig
  hw/mips: Explicit the semi-hosting feature is always required
  tests/machine-none: Test recent MIPS cpus

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-03 21:19:03 +01:00
Aleksandar Markovic
698c5752c4 target/mips: Correct helper for MSA FCLASS.<W|D> instructions
Correct helper for MSA FCLASS.<W|D> instructions.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1562068213-11307-8-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02 14:20:42 +02:00
Aleksandar Markovic
807e6773a5 target/mips: Unroll loops for MSA float max/min instructions
Slight preformance improvement for MSA float max/min instructions.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1562068213-11307-7-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02 14:20:39 +02:00
Aleksandar Markovic
44da090ba0 target/mips: Correct comments in msa_helper.c
Fix some errors in comments for MSA helpers.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1562068213-11307-6-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02 14:20:36 +02:00
Aleksandar Markovic
7480515fcc target/mips: Correct comments in translate.c
Fix some checkpatch comment-related warnings.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1562068213-11307-5-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02 14:20:32 +02:00
Markus Armbruster
7f7b4e7abe qapi: Split machine-target.json off target.json and misc.json
Move commands query-cpu-definitions, query-cpu-model-baseline,
query-cpu-model-comparison, and query-cpu-model-expansion with their
types from target.json to machine-target.json.  Also move types
CpuModelInfo, CpuModelExpansionType, and CpuModelCompareResult from
misc.json there.  Add machine-target.json to MAINTAINERS section
"Machine core".

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-13-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Commit message typo fixed]
2019-07-02 13:37:00 +02:00
Aleksandar Markovic
5a6a1fabfc target/mips: Fix big endian host behavior for interleave MSA instructions
Fix big endian host behavior for interleave MSA instructions. Previous
fix used TARGET_WORDS_BIGENDIAN instead of HOST_WORDS_BIGENDIAN, which
was a mistake.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-9-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26 13:25:56 +02:00
Peter Maydell
474f3938d7 MIPS queue for June 21st, 2019
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdDKeRAAoJENSXKoln91pl7OAH/30utWuYrfhakCN2AoYWo4ek
 LrodEAQ01rdUBPC87v6no8MFm3ZqdcefOqZcm6OjBUhV5PCzIvb1LiayYNmcNTH6
 eGZ5OYCLmR1IU32AeVQVqGDTt5yZMo6csdDVfNXIYmBdibJoqQ7np0wRik5ALQQE
 +5dsEpzQ4GdTJp/2BggaYb67Mf0fnPCWstcw/iMuTrxBvyyyNFj88XTKq1SJVxAd
 glFLw8iTVfFnsad9xINj/nkUfGKVGG5LTEjv/J0v6RmjWVD1TG5FPH1q4m6tX+Ey
 pEY/C4QKl1quJnpQaAdMkfxb8yzKNtCV92f2Oti05/tYoW6BNTDt3GLtsz21j+Y=
 =uL8C
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jun-21-2019' into staging

MIPS queue for June 21st, 2019

# gpg: Signature made Fri 21 Jun 2019 10:46:57 BST
# gpg:                using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01  DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-queue-jun-21-2019:
  target/mips: Fix emulation of ILVR.<B|H|W> on big endian host
  target/mips: Fix emulation of ILVL.<B|H|W> on big endian host
  target/mips: Fix emulation of ILVOD.<B|H|W> on big endian host
  target/mips: Fix emulation of ILVEV.<B|H|W> on big endian host
  tests/tcg: target/mips: Amend tests for MSA pack instructions
  tests/tcg: target/mips: Include isa/ase and group name in test output
  target/mips: Fix if-else-switch-case arms checkpatch errors in translate.c
  target/mips: Fix some space checkpatch errors in translate.c
  MAINTAINERS: Consolidate MIPS disassembler-related items
  MAINTAINERS: Update file items for MIPS Malta board

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-21 15:40:50 +01:00
Aleksandar Markovic
14f5d874bc target/mips: Fix emulation of ILVR.<B|H|W> on big endian host
Fix emulation of ILVR.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561038349-17105-5-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-21 11:31:13 +02:00
Aleksandar Markovic
8e74bceb00 target/mips: Fix emulation of ILVL.<B|H|W> on big endian host
Fix emulation of ILVL.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561038349-17105-4-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-21 11:31:10 +02:00
Aleksandar Markovic
b000169e4e target/mips: Fix emulation of ILVOD.<B|H|W> on big endian host
Fix emulation of ILVOD.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561038349-17105-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-21 11:31:07 +02:00
Aleksandar Markovic
98880cb5a6 target/mips: Fix emulation of ILVEV.<B|H|W> on big endian host
Fix emulation of ILVEV.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561038349-17105-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-21 11:31:03 +02:00
Aleksandar Markovic
1f8929d241 target/mips: Fix if-else-switch-case arms checkpatch errors in translate.c
Remove if-else-switch-case-arms-related checkpatch errors.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1561037595-14413-5-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-21 11:29:51 +02:00
Aleksandar Markovic
235785e834 target/mips: Fix some space checkpatch errors in translate.c
Remove some space-related checkpatch warning.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1561037595-14413-4-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-21 11:29:47 +02:00
Liran Alon
b1115c9991 KVM: Introduce kvm_arch_destroy_vcpu()
Simiar to how kvm_init_vcpu() calls kvm_arch_init_vcpu() to perform
arch-dependent initialisation, introduce kvm_arch_destroy_vcpu()
to be called from kvm_destroy_vcpu() to perform arch-dependent
destruction.

This was added because some architectures (Such as i386)
currently do not free memory that it have allocated in
kvm_arch_init_vcpu().

Suggested-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-3-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21 02:29:39 +02:00
Markus Armbruster
a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Markus Armbruster
0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Richard Henderson
e8b5fae516 cpu: Remove CPU_COMMON
This macro is now always empty, so remove it.  This leaves the
entire contents of CPUArchState under the control of the guest
architecture.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson
5b146dc716 cpu: Introduce CPUNegativeOffsetState
Nothing in there so far, but all of the plumbing done
within the target ArchCPU state.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson
7506ed902e cpu: Introduce cpu_set_cpustate_pointers
Consolidate some boilerplate from foo_cpu_initfn.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson
677c4d69ac cpu: Move ENV_OFFSET to exec/gen-icount.h
Now that we have ArchCPU, we can define this generically,
in the one place that needs it.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson
5a7330b35c target/mips: Use env_cpu, env_archcpu
Cleanup in the boilerplate that each target must define.
Replace mips_env_get_cpu with env_archcpu.  The combination
CPU(mips_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson
29a0af618d cpu: Replace ENV_GET_CPU with env_cpu
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Richard Henderson
2161a612b4 cpu: Define ArchCPU
For all targets, do this just before including exec/cpu-all.h.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Richard Henderson
4f7c64b381 cpu: Define CPUArchState with typedef
For all targets, do this just before including exec/cpu-all.h.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Richard Henderson
74433bf083 tcg: Split out target/arch/cpu-param.h
For all targets, into this new file move TARGET_LONG_BITS,
TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS,
TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES.

Include this new file from exec/cpu-defs.h.

This now removes the somewhat odd requirement that target/arch/cpu.h
defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the
bulk of the includes within target/arch/cpu.h to the top.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Aleksandar Markovic
5d161bc818 target/mips: Unroll loops in helpers for MSA logic instructions
Unroll loops in helpers for MSA logic instructions for better
performance.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-5-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-07 11:53:07 +02:00
Aleksandar Markovic
7471df9f9e target/mips: Outline places for future MSA helpers
Outline places for future MSA helpers to follow the same organization
as in MSA tests.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-4-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-07 11:52:50 +02:00
Aleksandar Markovic
7cc8a7220d target/mips: Fix block-comment-related issues in msa_helper.c
Fix block-comment-related issues reported by checkpatch for file
msa_helper.c.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-06 21:06:33 +02:00
Aleksandar Markovic
de1700d316 target/mips: Fix space-related format issues in msa_helper.c
Fix space-related format issues reported by checkpatch in file
msa_helper.c.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-06 21:06:24 +02:00
Mateja Marjanovic
0df911fd7f target/mips: Improve performance of certain MSA instructions
Eliminate loops for better performance.

Following MSA instructions from "UNOP" group are affected:

 - NLZC.<B|H|W|D>
 - NLOC.<B|H|W|D>
 - PCNT.<B|H|W|D>

Following MSA instructions from "BINOP" group are affected:

 - ADD_A.<B|H|W|D>
 - ADDS_A.<B|H|W|D>
 - ADDS_S.<B|H|W|D>
 - ADDS_U.<B|H|W|D>
 - ADDV.<B|H|W|D>
 - ASUB_S.<B|H|W|D>
 - ASUB_U.<B|H|W|D>
 - AVE_S.<B|H|W|D>
 - AVE_U.<B|H|W|D>
 - AVER_S.<B|H|W|D>
 - AVER_U.<B|H|W|D>
 - BCLR.<B|H|W|D>
 - BNEG.<B|H|W|D>
 - BSET.<B|H|W|D>
 - CEQ.<B|H|W|D>
 - CLE_S.<B|H|W|D>
 - CLE_U.<B|H|W|D>
 - CLT_S.<B|H|W|D>
 - CLT_U.<B|H|W|D>
 - DIV_S.<B|H|W|D>
 - DIV_U.<B|H|W|D>
 - DOTP_S.<B|H|W|D>
 - DOTP_U.<B|H|W|D>
 - HADD_S.<B|H|W|D>
 - HADD_U.<B|H|W|D>
 - HSUB_S.<B|H|W|D>
 - HSUB_U.<B|H|W|D>
 - MAX_A.<B|H|W|D>
 - MAX_S.<B|H|W|D>
 - MAX_U.<B|H|W|D>
 - MIN_A.<B|H|W|D>
 - MIN_S.<B|H|W|D>
 - MIN_U.<B|H|W|D>
 - MOD_S.<B|H|W|D>
 - MOD_U.<B|H|W|D>
 - MUL_Q.<B|H|W|D>
 - MULR_Q.<B|H|W|D>
 - MULV.<B|H|W|D>
 - SLL.<B|H|W|D>
 - SRA.<B|H|W|D>
 - SRAR.<B|H|W|D>
 - SRL.<B|H|W|D>
 - SRLR.<B|H|W|D>
 - SUBS_S.<B|H|W|D>
 - SUBS_U.<B|H|W|D>
 - SUBSUS_U.<B|H|W|D>
 - SUBSUU_S.<B|H|W|D>
 - SUBV.<B|H|W|D>

Following MSA instructions from "TEROP" group are affected:

 - BINSL.<B|H|W|D>
 - BINSR.<B|H|W|D>
 - DPADD_S.<B|H|W|D>
 - DPADD_U.<B|H|W|D>
 - DPSUB_S.<B|H|W|D>
 - DPSUB_U.<B|H|W|D>
 - MADD_Q.<B|H|W|D>
 - MADDR_Q.<B|H|W|D>
 - MADDV.<B|H|W|D>
 - MSUB_Q.<B|H|W|D>
 - MSUBR_Q.<B|H|W|D>
 - MSUBV.<B|H|W|D>

Additionally, following MSA instructionas are also affected:

 - ILVL.<B|H|W|D>
 - ILVR.<B|H|W|D>
 - ILVEV.<B|H|W|D>
 - ILVOD.<B|H|W|D>
 - PCKEV.<B|H|W|D>
 - PCKOD.<B|H|W|D>

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1551718283-4487-2-git-send-email-mateja.marjanovic@rt-rk.com>
2019-06-01 20:20:20 +02:00
Aleksandar Markovic
baf5001115 target/mips: Clean up lmi_helper.c
Remove several minor checkpatch warnings and errors.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556018982-3715-7-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-01 20:20:20 +02:00
Aleksandar Markovic
f49ab2e1e6 target/mips: Clean up dsp_helper.c
Remove several minor checkpatch warnings and errors.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556018982-3715-6-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-01 20:20:20 +02:00
Mateja Marjanovic
fd487f83ea target/mips: Add emulation of MMI instruction PCPYUD
Add emulation of MMI instruction PCPYUD. The emulation is implemented
using TCG front end operations directly to achieve better performance.

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-4-git-send-email-mateja.marjanovic@rt-rk.com>
2019-06-01 20:20:20 +02:00
Mateja Marjanovic
b87eef31f2 target/mips: Add emulation of MMI instruction PCPYLD
Add emulation of MMI instruction PCPYLD. The emulation is implemented
using TCG front end operations directly to achieve better performance.

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-3-git-send-email-mateja.marjanovic@rt-rk.com>
2019-06-01 20:20:20 +02:00
Mateja Marjanovic
d3434d9f78 target/mips: Add emulation of MMI instruction PCPYH
Add emulation of MMI instruction PCPYH. The emulation is implemented
using TCG front end operations directly to achieve better performance.

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-2-git-send-email-mateja.marjanovic@rt-rk.com>
2019-06-01 20:20:20 +02:00
Peter Maydell
8c1ecb5904 Various testing updates
- semihosting re-factor (used in system tests)
   - aarch64 and alpha system tests
   - editorconfig tweak for .S
   - some docker image updates
   - iotests clean-up (without make check inclusion)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAlztYToACgkQ+9DbCVqe
 KkQU9wf/Uv5qBgDn9MwcCt8tzHTX/i21QHwFLBbCmFoUwZjSridZ2KV6Ma3ig4mF
 xY+8Cr5oZT186V+aD39K6KCZKqZRulIpRVNkOKXEfAAklUoAyQs95Wa8F8LtO1eG
 vOtOYEdkXQQiAnlnQ+eaGiZQ2mpbCbREa10JrBhxp6iXh0PYcvtD7iAlOldqIvd2
 hDRwOgTtYoiiKh6UdediAgQsRvv6oNPHFUOjWgrGxfhPWKbjCVKl7VS4furg9zux
 j/S0E0xYKhj+JNq3arjiMUMl19TauCBQLrbQpphd1jOl1s7bELRjAuaKM60TVIbW
 Hd2/PYbGnkpyUcJQh0Pr1cb4RMcznw==
 =lvtu
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging

Various testing updates

  - semihosting re-factor (used in system tests)
  - aarch64 and alpha system tests
  - editorconfig tweak for .S
  - some docker image updates
  - iotests clean-up (without make check inclusion)

# gpg: Signature made Tue 28 May 2019 17:26:34 BST
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-next-280519-2: (27 commits)
  tests/qemu-iotests: re-format output to for make check-block
  tests/qemu-iotests/group: Re-use the "auto" group for tests that can always run
  Makefile.target: support per-target coverage reports
  Makefile: include per-target build directories in coverage report
  Makefile: fix coverage-report reference to BUILD_DIR
  .travis.yml: enable aarch64-softmmu and alpha-softmmu tcg tests
  tests/tcg/alpha: add system boot.S
  tests/tcg/multiarch: expand system memory test to cover more
  tests/tcg/minilib: support %c format char
  tests/tcg/multiarch: move the system memory test
  tests/tcg/aarch64: add system boot.S
  editorconfig: add settings for .s/.S files
  tests/tcg/multiarch: add hello world system test
  tests/tcg/multiarch: add support for multiarch system tests
  tests/docker: Test more components on the Fedora default image
  tests/docker: add ubuntu 18.04
  MAINTAINERS: update for semihostings new home
  target/mips: convert UHI_plog to use common semihosting code
  target/mips: only build mips-semi for softmmu
  target/arm: correct return values for WRITE/READ in arm-semi
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-28 17:38:32 +01:00
Alex Bennée
54eb6cda9d target/mips: convert UHI_plog to use common semihosting code
Rather than printing directly to stdout lets use our common
semihosting code. There is one minor difference in that the output
currently defaults to stderr instead of stdout however this can be
controlled by connecting semihosting to a chardev.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-05-28 10:28:51 +01:00
Alex Bennée
82ba42666c target/mips: only build mips-semi for softmmu
The is_uhi gates all semihosting calls and always returns false for
CONFIG_USER_ONLY builds. There is no reason to build and link
mips-semi for these builds so lets fix that.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28 10:28:51 +01:00
Alex Bennée
f1672e6f2b semihosting: move semihosting configuration into its own directory
In preparation for having some more common semihosting code let's
excise the current config magic from vl.c into its own file. We shall
later add more conditionals to the build configurations so we can
avoid building this if we don't need it.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28 10:28:50 +01:00
Jules Irenge
9e72f33d85 target/mips: realign comments to fix checkpatch warnings
Realign comments to fix warnings issued by checkpatc.pl tool
 "WARNING: Block comments use a leading /* on a separate line"
within "target/mips/cpu.h" file.

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190413202818.13622-3-jbi.octave@gmail.com>
2019-05-26 17:44:55 +02:00
Jules Irenge
8ebf2e1a68 target/mips: add or remove space to fix checkpatch errors
Add or remove space to fix errors issued by checkpatch.pl tool
"ERROR: spaces required around that..."
"ERROR: space required after that..."
"ERROR: space required before the open parenthesis"
"ERROR: space required after that..."
"ERROR: space prohibited between function name and open parenthesis"
"ERROR: code indent should never use tabs"
"ERROR: line over 90 characters"
within "target/mips/cpu.h" file.

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190413202818.13622-2-jbi.octave@gmail.com>
2019-05-26 17:44:44 +02:00
Jakub Jermář
7353113fa4 mips: Decide to map PAGE_EXEC in map_address
This commit addresses QEMU Bug #1825311:

  mips_cpu_handle_mmu_fault renders all accessed pages executable

It allows finer-grained control over whether the accessed page should
be executable by moving the decision to the underlying map_address
function, which has more information for this.

As a result, pages that have the XI bit set in the TLB and are accessed
for read/write, don't suddenly end up being executable.

Fixes: https://bugs.launchpad.net/qemu/+bug/1825311
Fixes: 2fb58b7374 ('target-mips: add RI and XI fields to TLB entry')

Signed-off-by: Jakub Jermář <jakub.jermar@kernkonzept.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190517123533.868479-1-jakub.jermar@kernkonzept.com>
2019-05-26 17:33:24 +02:00
Mateja Marjanovic
c1c9a10fb1 target/mips: Refactor and fix INSERT.<B|H|W|D> instructions
The old version of the helper for the INSERT.<B|H|W|D> MSA instructions
has been replaced with four helpers that don't use switch, and change
the endianness of the given index, when executed on a big endian host.

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-6-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26 17:33:16 +02:00
Mateja Marjanovic
41d2885827 target/mips: Refactor and fix COPY_U.<B|H|W> instructions
The old version of the helper for the COPY_U.<B|H|W> MSA instructions
has been replaced with four helpers that don't use switch, and change
the endianness of the given index, when executed on a big endian host.

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-5-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26 17:33:05 +02:00
Mateja Marjanovic
631c467461 target/mips: Refactor and fix COPY_S.<B|H|W|D> instructions
The old version of the helper for the COPY_S.<B|H|W|D> MSA instructions
has been replaced with four helpers that don't use switch, and change
the endianness of the given index, when executed on a big endian host.

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-4-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26 17:32:57 +02:00
Mateja Marjanovic
6decc572dc target/mips: Fix MSA instructions ST.<B|H|W|D> on big endian host
Fix the case when the host is a big endian machine, and change
the approach toward ST.<B|H|W|D> instruction helpers.

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-3-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26 17:32:52 +02:00
Mateja Marjanovic
83be6b5412 target/mips: Fix MSA instructions LD.<B|H|W|D> on big endian host
Fix the case when the host is a big endian machine, and change
the approach toward LD.<B|H|W|D> instruction helpers.

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-2-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26 17:32:45 +02:00
Mateja Marjanovic
cf122bf8d2 target/mips: Make the results of MOD_<U|S>.<B|H|W|D> the same as on hardware
MSA instructions MOD_<U|S>.<B|H|W|D> when dividing by zero,
didn't return the same value when executed on a referent hardware
(FPGA MIPS 64 r6, little endian) and when executed on QEMU, which
is not a real bug, because the result when dividing by zero is
UNPREDICTABLE [1] (page 255, 256).

[1] MIPS Architecture for Programmers
    Volume IV-j: The MIPS64 SIMD
    Architecture Module, Revision 1.12

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554207110-9113-3-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26 17:32:37 +02:00
Mateja Marjanovic
d2a40a5f69 target/mips: Make the results of DIV_<U|S>.<B|H|W|D> the same as on hardware
MSA instructions DIV_<U|S>.<B|H|W|D> when dividing by zero,
didn't return the same value when executed on a referent hardware
(FPGA MIPS 64 r6, little endian) and when executed on QEMU, which
is not a real bug, because the result when dividing by zero is
UNPREDICTABLE [1] (page 141, 142).

[1] MIPS Architecture for Programmers
    Volume IV-j: The MIPS64 SIMD
    Architecture Module, Revision 1.12

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554207110-9113-2-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26 17:32:31 +02:00
Richard Henderson
c319dc1357 tcg: Use CPUClass::tlb_fill in cputlb.c
We can now use the CPUClass hook instead of a named function.

Create a static tlb_fill function to avoid other changes within
cputlb.c.  This also isolates the asserts within.  Remove the
named tlb_fill function from all of the targets.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10 11:12:50 -07:00
Richard Henderson
931d019f5b target/mips: Convert to CPUClass::tlb_fill
Note that env->active_tc.PC is removed from the qemu_log as that value
is garbage.  The PC isn't recovered until cpu_restore_state, called from
cpu_loop_exit_restore, called from do_raise_exception_err.

Cc: Aleksandar Markovic <amarkovic@wavecomp.com>
Cc: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10 11:12:50 -07:00
Richard Henderson
e38f4eb630 target/mips: Tidy control flow in mips_cpu_handle_mmu_fault
Since the only non-negative TLBRET_* value is TLBRET_MATCH,
the subsequent test for ret < 0 is useless.  Use early return
to allow subsequent blocks to be unindented.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10 11:12:50 -07:00
Richard Henderson
995ffde962 target/mips: Pass a valid error to raise_mmu_exception for user-only
At present we give ret = 0, or TLBRET_MATCH.  This gets matched
by the default case, which falls through to TLBRET_BADADDR.
However, it makes more sense to use a proper value.  All of the
tlb-related exceptions are handled identically in cpu_loop.c,
so TLBRET_BADADDR is as good as any other.  Retain it.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10 11:12:50 -07:00
Richard Henderson
8b86d6d258 tcg: Hoist max_insns computation to tb_gen_code
In order to handle TB's that translate to too much code, we
need to place the control of the length of the translation
in the hands of the code gen master loop.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:04:33 -07:00
Markus Armbruster
90c84c5600 qom/cpu: Simplify how CPUClass:cpu_dump_state() prints
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it.  Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *.  monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().

The callback gets passed around a lot, which is tiresome.  The
type-punning around monitor_fprintf() is ugly.

Drop the callback, and call qemu_fprintf() instead.  Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
2019-04-18 22:18:59 +02:00
Markus Armbruster
0442428a89 target: Simplify how the TARGET_cpu_list() print
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it.  Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout.  Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.

Drop the callback, and call qemu_printf() instead.

Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-04-18 22:18:59 +02:00
Markus Armbruster
500016e5db trace-events: Shorten file names in comments
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files.  That's because when trace-events got split up, the
comments were moved verbatim.

Delete the sub/dir/ part from these comments.  Gets rid of several
misspellings.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Mateja Marjanovic
37b9aae2e6 target/mips: Preparing for adding MMI instructions
Set up MMI code to be compiled only for TARGET_MIPS64. This is
needed so that GPRs are 64 bit, and combined with MMI registers,
they will form full 128 bit registers.

Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551183797-13570-2-git-send-email-mateja.marjanovic@rt-rk.com>
2019-02-27 14:26:14 +01:00
Pavel Dovgalyuk
535db74413 target/mips: implement QMP query-cpu-definitions command
This patch enables QMP-based querying of the available CPU types for
MIPS and MIPS64 platforms.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2019-02-21 19:36:47 +01:00
Aleksandar Markovic
0454728c22 target/mips: introduce MTTCG-enabled builds
Introduce MTTCG-enabled QEMU builds for mips32, mipsn32, and mips64.

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-14 17:47:28 +01:00
Goran Ferenc
41931c0137 target/mips: hold BQL in mips_vpe_wake()
Hold BQL whenever mips_vpe_wake() is invoked.

Without this patch, MIPS MT with MTTCG enabled triggers an abort in
tcg_handle_interrupt() due to an unlocked access to cpu_interrupt().
This patch makes sure that the BQL is held in this case.

Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-14 17:47:28 +01:00
Aleksandar Markovic
215581bdf1 hw/mips_int: hold BQL for all interrupt requests
Make sure BQL is held for all interrupt requests.

For MTTCG-enabled configurations, handling soft and hard interrupts
between vCPUs must be properly locked. By acquiring BQL, make sure
all paths triggering an IRQ are synchronized.

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-14 17:47:28 +01:00
Leon Alrae
33a07fa2db target/mips: reimplement SC instruction emulation and use cmpxchg
Completely rewrite conditional stores handling. Use cmpxchg.

This eliminates need for separate implementations of SC instruction
emulation for user and system emulation.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-14 17:47:28 +01:00
Leon Alrae
c7c7e1e9a5 target/mips: compare virtual addresses in LL/SC sequence
Do only virtual addresses comaprisons in LL/SC sequence emulations.

Until this patch, physical addresses had been compared in SC part of
LL/SC sequence, even though such comparisons could be avoided. Getting
rid of them allows throwing away SC helpers and having common SC
implementations in user and system mode, avoiding the need for two
separate implementations selected by #ifdef CONFIG_USER_ONLY.

Correct guest software should not rely on LL/SC if they accesses the
same physical address via different virtual addresses or if page
mapping gets changed between LL/SC due to manipulating TLB entries.
MIPS Instruction Set Manual clearly says that an RMW sequence must
use the same address in the LL and SC (virtual address, physical
address, cacheability and coherency attributes must be identical).
Otherwise, the result of the SC is not predictable. This patch takes
advantage of this fact and removes the virtual->physical address
translation from SC helper.

lladdr served as Coprocessor 0 LLAddr register which captures physical
address of the most recent LL instruction, and also lladdr was used
for comparison with following SC physical address. This patch changes
the meaning of lladdr - now it will only keep the virtual address of
the most recent LL. Additionally, CP0_LLAddr field is introduced which
is the actual Coperocessor 0 LLAddr register that guest can access.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-02-14 17:47:28 +01:00
Yongbok Kim
ca1ffd14ed target/mips: Add I6500 core configuration
Add I6500 core configuration. Note that this configuration is
supported only on best-effort basis due to the lack of certain
features in QEMU.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24 17:48:33 +01:00
Stefan Markovic
697b7b6bc5 target/mips: nanoMIPS: Fix branch handling
Fix nanoMIPS branch handling.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24 17:48:33 +01:00
Aleksandar Markovic
8d5388c1de target/mips: Extend gen_scwp() functionality to support EVA
Extend gen_scwp() functionality to support EVA by adding an
additional argument, modify internals of the function to handle
new functionality, and accordingly change its invocations.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24 17:48:33 +01:00
Aleksandar Markovic
5b1e098128 target/mips: Correct the second argument type of cpu_supports_isa()
"insn_flags" bitfield was expanded from 32-bit to 64-bit in commit
f9c9cd63e3. However, this was not reflected on the second argument
of the function cpu_supports_isa(). By chance, this did not create
some wrong behavior, since the left-most halves of all instances of
the second argument are currently all zeros. However, this is still
a bug waiting to happen. Correct this by changing the type of the
second argument to be always 64-bit.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24 17:48:33 +01:00
Aleksandar Markovic
99e49abf11 target/mips: nanoMIPS: Rename macros for extracting 3-bit-coded GPR numbers
Rename macros for extracting 3-bit-coded GPR numbers, to achieve
better consistency with the nanoMIPS documentation.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24 17:48:33 +01:00
Aleksandar Markovic
be3a131a05 target/mips: nanoMIPS: Remove an unused macro
Remove a macro that is never used.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24 17:48:33 +01:00
Aleksandar Markovic
362d2e7254 target/mips: nanoMIPS: Remove duplicate macro definitions
Several macros were defined twice, with identical values, so
remove duplicates.

Previously added in 80845edf37.

This reverts commit 6bfa9f4c9c.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24 17:48:33 +01:00
Fredrik Noring
a168a796e1 target/mips: Introduce 32 R5900 multimedia registers
The 32 R5900 128-bit registers are split into two 64-bit halves:
the lower halves are the GPRs and the upper halves are accessible
by the R5900-specific multimedia instructions.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18 16:53:28 +01:00
Aleksandar Markovic
294fc2ea7f target/mips: Rename 'rn' to 'register_name'
Rename 'rn' to 'register_name' in CP0-related handlers.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18 16:53:28 +01:00
Aleksandar Markovic
3ef521ee9f target/mips: Add CP0 register MemoryMapID
Add CP0 register MemoryMapID. Only data field is added.
The corresponding functionality will be added in future
patches.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18 16:53:28 +01:00
Aleksandar Markovic
04992c8cd1 target/mips: Amend preprocessor constants for CP0 registers
Correct existing CP0-related preprocessor constants (replace
"CPO" with "CP0" (form letter "O" to digit "0", when needed).
Besides, add preprocessor constants for CP0 subregisters.
The names of the subregisters were chosen to be in sync with
the table of corresponding assembler mnemonics found in the
documentation for I6500 and I6400 (release 1.0).

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18 16:53:28 +01:00
Yongbok Kim
043715d1e0 target/mips: Update ITU to utilize SAARI and SAAR CP0 registers
Update ITU to utilize SAARI and SAAR CP0 registers.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18 16:53:28 +01:00
Yongbok Kim
5fb2dcd179 target/mips: Provide R/W access to SAARI and SAAR CP0 registers
Provide R/W access to SAARI and SAAR CP0 registers.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18 16:53:28 +01:00
Yongbok Kim
167db30e98 target/mips: Add fields for SAARI and SAAR CP0 registers
Add fields for SAARI and SAAR CP0 registers.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18 16:53:28 +01:00
Aleksandar Markovic
46d7642fcc target/mips: Use preprocessor constants for 32 major CP0 registers
Use preprocessor constants for 32 major CP0 registers.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18 16:53:28 +01:00
Aleksandar Markovic
efd27d3f08 target/mips: Add preprocessor constants for 32 major CP0 registers
Add preprocessor constants for 32 major CP0 registers.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18 16:53:28 +01:00
Aleksandar Markovic
ea9c5e836e target/mips: Move comment containing summary of CP0 registers
Move comment containing summary of CP0 registers. Checkpatch
script reported some tabs in the resutling diff, so convert
these tabs to spaces too.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18 16:53:28 +01:00
Paolo Bonzini
7d37435bd5 avoid TABs in files that only contain a few
Most files that have TABs only contain a handful of them.  Change
them to spaces so that we don't confuse people.

disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line.  Many of them
have a majority of TABs, or were initially committed with all tabs.

    bsd-user/i386/target_syscall.h
    bsd-user/x86_64/target_syscall.h
    crypto/aes.c
    hw/audio/fmopl.c
    hw/audio/fmopl.h
    hw/block/tc58128.c
    hw/display/cirrus_vga.c
    hw/display/xenfb.c
    hw/dma/etraxfs_dma.c
    hw/intc/sh_intc.c
    hw/misc/mst_fpga.c
    hw/net/pcnet.c
    hw/sh4/sh7750.c
    hw/timer/m48t59.c
    hw/timer/sh_timer.c
    include/crypto/aes.h
    include/disas/bfd.h
    include/hw/sh4/sh.h
    libdecnumber/decNumber.c
    linux-headers/asm-generic/unistd.h
    linux-headers/linux/kvm.h
    linux-user/alpha/target_syscall.h
    linux-user/arm/nwfpe/double_cpdo.c
    linux-user/arm/nwfpe/fpa11_cpdt.c
    linux-user/arm/nwfpe/fpa11_cprt.c
    linux-user/arm/nwfpe/fpa11.h
    linux-user/flat.h
    linux-user/flatload.c
    linux-user/i386/target_syscall.h
    linux-user/ppc/target_syscall.h
    linux-user/sparc/target_syscall.h
    linux-user/syscall.c
    linux-user/syscall_defs.h
    linux-user/x86_64/target_syscall.h
    slirp/cksum.c
    slirp/if.c
    slirp/ip.h
    slirp/ip_icmp.c
    slirp/ip_icmp.h
    slirp/ip_input.c
    slirp/ip_output.c
    slirp/mbuf.c
    slirp/misc.c
    slirp/sbuf.c
    slirp/socket.c
    slirp/socket.h
    slirp/tcp_input.c
    slirp/tcpip.h
    slirp/tcp_output.c
    slirp/tcp_subr.c
    slirp/tcp_timer.c
    slirp/tftp.c
    slirp/udp.c
    slirp/udp.h
    target/cris/cpu.h
    target/cris/mmu.c
    target/cris/op_helper.c
    target/sh4/helper.c
    target/sh4/op_helper.c
    target/sh4/translate.c
    tcg/sparc/tcg-target.inc.c
    tests/tcg/cris/check_addo.c
    tests/tcg/cris/check_moveq.c
    tests/tcg/cris/check_swap.c
    tests/tcg/multiarch/test-mmap.c
    ui/vnc-enc-hextile-template.h
    ui/vnc-enc-zywrle.h
    util/envlist.c
    util/readline.c

The following have only TABs:

    bsd-user/i386/target_signal.h
    bsd-user/sparc64/target_signal.h
    bsd-user/sparc64/target_syscall.h
    bsd-user/sparc/target_signal.h
    bsd-user/sparc/target_syscall.h
    bsd-user/x86_64/target_signal.h
    crypto/desrfb.c
    hw/audio/intel-hda-defs.h
    hw/core/uboot_image.h
    hw/sh4/sh7750_regnames.c
    hw/sh4/sh7750_regs.h
    include/hw/cris/etraxfs_dma.h
    linux-user/alpha/termbits.h
    linux-user/arm/nwfpe/fpopcode.h
    linux-user/arm/nwfpe/fpsr.h
    linux-user/arm/syscall_nr.h
    linux-user/arm/target_signal.h
    linux-user/cris/target_signal.h
    linux-user/i386/target_signal.h
    linux-user/linux_loop.h
    linux-user/m68k/target_signal.h
    linux-user/microblaze/target_signal.h
    linux-user/mips64/target_signal.h
    linux-user/mips/target_signal.h
    linux-user/mips/target_syscall.h
    linux-user/mips/termbits.h
    linux-user/ppc/target_signal.h
    linux-user/sh4/target_signal.h
    linux-user/sh4/termbits.h
    linux-user/sparc64/target_syscall.h
    linux-user/sparc/target_signal.h
    linux-user/x86_64/target_signal.h
    linux-user/x86_64/termbits.h
    pc-bios/optionrom/optionrom.h
    slirp/mbuf.h
    slirp/misc.h
    slirp/sbuf.h
    slirp/tcp.h
    slirp/tcp_timer.h
    slirp/tcp_var.h
    target/i386/svm.h
    target/sparc/asi.h
    target/xtensa/core-dc232b/xtensa-modules.inc.c
    target/xtensa/core-dc233c/xtensa-modules.inc.c
    target/xtensa/core-de212/core-isa.h
    target/xtensa/core-de212/xtensa-modules.inc.c
    target/xtensa/core-fsf/xtensa-modules.inc.c
    target/xtensa/core-sample_controller/core-isa.h
    target/xtensa/core-sample_controller/xtensa-modules.inc.c
    target/xtensa/core-test_kc705_be/core-isa.h
    target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
    tests/tcg/cris/check_abs.c
    tests/tcg/cris/check_addc.c
    tests/tcg/cris/check_addcm.c
    tests/tcg/cris/check_addoq.c
    tests/tcg/cris/check_bound.c
    tests/tcg/cris/check_ftag.c
    tests/tcg/cris/check_int64.c
    tests/tcg/cris/check_lz.c
    tests/tcg/cris/check_openpf5.c
    tests/tcg/cris/check_sigalrm.c
    tests/tcg/cris/crisutils.h
    tests/tcg/cris/sys.c
    tests/tcg/i386/test-i386-ssse3.c
    ui/vgafont.h

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:56 +01:00
Fredrik Noring
a95c4c26f1 target/mips: Support R5900 three-operand MADD1 and MADDU1 instructions
The three-operand MADD and MADDU are specific to R5900 cores.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
2019-01-03 17:52:52 +01:00
Philippe Mathieu-Daudé
3b948f053f target/mips: Support R5900 three-operand MADD and MADDU instructions
The three-operand MADD and MADDU are specific to Sony R5900 core,
and Toshiba TX19/TX39/TX79 cores as well.

The "32-Bit TX System RISC TX39 Family Architecture manual"
is available at https://wiki.qemu.org/File:DSAE0022432.pdf

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé<f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Tested-by: Fredrik Noring <noring@nocrew.org>
2019-01-03 17:52:52 +01:00
Aleksandar Markovic
79f5fee7a3 target/mips: MXU: Add handler for an align instruction
Add translation handler for S32ALNI MXU instruction.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03 17:52:52 +01:00
Aleksandar Markovic
bb84cbf385 target/mips: MXU: Add handlers for max/min instructions
Add translation handlers for six max/min MXU instructions.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03 17:52:52 +01:00
Aleksandar Markovic
b621f0187e target/mips: MXU: Add handlers for logic instructions
Add translation handlers for four logic MXU instructions.

It should be noted that there is an error in MXU documentation (dated
June 2017) regarding opcodes for this group of instructions. This was
confirmed by running tests on hardware, and also by looking up other
related public source trees (binutils, Android NDK). In initial MXU
patches to QEMU, opcodes for MXU logic instructions were created to
be in accordance with the MXU documentation, therefore the error from
was propagated. This patch corrects that, changing the involved code.
Besides that, as MXU was designed and implemented only for 32-bit
CPUs, corresponding preprosessor conditions were added around MXU
code, which allows more flexible implementation of MXU handlers.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03 17:52:52 +01:00
Aleksandar Markovic
84e2c895b1 target/mips: MXU: Improve the comment containing MXU overview
Improve textual description of MXU extension. These are mostly
comment formatting changes.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03 17:52:52 +01:00
Aleksandar Markovic
16fef5b221 target/mips: MXU: Add generic naming for optn2 constants
Add generic naming involving generig suffixes OPTN0, OPTN1, OPTN2,
OPTN3 for four optn2 constants. Existing suffixes WW, LW, HW, XW
are not quite appropriate for some instructions using optn2.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03 17:52:52 +01:00
Aleksandar Markovic
c233bf07af target/mips: MXU: Add missing opcodes/decoding for LX* instructions
Add missing opcodes and decoding engine for LXB, LXH, LXW, LXBU,
and LXHU instructions. They were for some reason forgotten in
previous commits. The MXU opcode list and decoding engine should
be now complete.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03 17:52:52 +01:00
Marc-André Lureau
03fee66fde vmstate: constify VMStateField
Because they are supposed to remain const.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-27 15:35:15 +01:00
Aleksandar Markovic
823f2897bd target/mips: Disable R5900 support
Disable R5900 support. There are some outstanding issues related
to ABI support and emulation accuracy, that were not understood
well during review process. Disable to avoid backward compatibility
issues.

Reverts commit ed4f49ba9b.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17 19:29:34 +01:00
Aleksandar Markovic
874b287970 target/mips: Rename MMI-related functions
Rename MMI-related functions.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17 19:29:34 +01:00
Aleksandar Markovic
baa609db75 target/mips: Rename MMI-related opcodes
Rename MMI-related opcodes.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17 19:29:34 +01:00
Aleksandar Markovic
c8341e0000 target/mips: Rename MMI-related masks
Rename MMI-related masks.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17 19:29:34 +01:00
Fredrik Noring
992e8176d3 target/mips: Guard check_insn with INSN_R5900 check
Explicitely mark handling of PREF instruction for R5900 as
treating the same as NOP.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17 19:29:34 +01:00
Fredrik Noring
55fc7a69aa target/mips: Guard check_insn_opc_user_only with INSN_R5900 check
Avoid using check_opc_user_only() as a decision making code wrt
various architectures. Use ctx->insn_flags checks instead.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17 19:29:34 +01:00
Fredrik Noring
9dc324ce66 target/mips: Fix decoding mechanism of special R5900 opcodes
MOVN, MOVZ, MFHI, MFLO, MTHI, MTLO, MULT, MULTU, DIV, DIVU, DMULT,
DMULTU, DDIV, DDIVU and JR are decoded in decode_opc_special_tx79
instead of the generic decode_opc_special_legacy.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17 19:29:34 +01:00
Fredrik Noring
c42171c3bf target/mips: Fix decoding mechanism of R5900 DIV1 and DIVU1
DIV1 and DIVU1 are generated in gen_div1_tx79 instead of the generic
gen_muldiv.

Signed-off-by: Fredrik Noring <noring@nocrew.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17 19:29:34 +01:00
Fredrik Noring
86efbfb619 target/mips: Fix decoding mechanism of R5900 MFLO1, MFHI1, MTLO1 and MTHI1
MFLO1, MFHI1, MTLO1 and MTHI1 are generated in gen_HILO1_tx79 instead of
the generic gen_HILO.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-11-17 19:29:34 +01:00
Aleksandar Markovic
093ade1217 target/mips: Amend MXU ASE overview note
Add prefix, suffix, operation descriptions, and other corrections
and amendments to the comment that describes MXU ASE.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:59 +01:00
Aleksandar Markovic
e5bf8a0829 target/mips: Move MXU_EN check one level higher
Move MXU_EN check to the main MXU decoding function, to avoid code
repetition.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:53 +01:00
Craig Janeczek
4ca837218c target/mips: Add emulation of MXU instructions S32LDD and S32LDDR
Add support for emulating the S32LDD and S32LDDR MXU instructions.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:53 +01:00
Craig Janeczek
a9a4181bdb target/mips: Add emulation of MXU instructions Q8MUL and Q8MULSU
Adds support for emulating the Q8MUL and Q8MULSU MXU instructions.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:53 +01:00
Craig Janeczek
e67915b427 target/mips: Add emulation of MXU instruction D16MAC
Add support for emulating the D16MAC MXU instruction.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:53 +01:00
Craig Janeczek
72c9bcf89c target/mips: Add emulation of MXU instruction D16MUL
Add support for emulating the D16MUL MXU instruction.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:53 +01:00
Craig Janeczek
be57bcdb2e target/mips: Add emulation of MXU instruction S8LDD
Add support for emulating the S8LDD MXU instruction.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:53 +01:00
Aleksandar Markovic
87860df551 target/mips: Move MUL, S32M2I, S32I2M handling out of main MXU switch
Move MUL, S32M2I, S32I2M handling out of switch. These are all
instructions that do not depend on MXU_EN flag of MXU_CR.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:53 +01:00
Craig Janeczek
96992d1aa1 target/mips: Add emulation of MXU instructions S32I2M and S32M2I
Add support for emulating the S32I2M and S32M2I MXU instructions.
This commit also contains utility functions for reading/writing
to MXU registers. This is required for overall MXU instruction
support.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:53 +01:00
Craig Janeczek
11d56f6103 target/mips: Add emulation of non-MXU MULL within MXU decoding engine
Add emulation of non-MXU MULL within MXU decoding engine.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:53 +01:00
Craig Janeczek
53f1131fde target/mips: Add bit encoding for MXU operand getting pattern 'optn3'
Add bit encoding for MXU operand getting pattern 'optn3'.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:53 +01:00
Craig Janeczek
a35723f4ce target/mips: Add bit encoding for MXU operand getting pattern 'optn2'
Add bit encoding for MXU operand getting pattern 'optn2'.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:47 +01:00
Aleksandar Markovic
5bb2999239 target/mips: Add bit encoding for MXU execute add/sub pattern 'eptn2'
Add bit encoding for MXU execute 2-bit add/subtract pattern 'eptn2'.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:47 +01:00
Craig Janeczek
b70bb918e2 target/mips: Add bit encoding for MXU accumulate add/sub 2-bit pattern 'aptn2'
Add bit encoding for MXU accumulate add/subtract 2-bit pattern
'aptn2'.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:47 +01:00
Aleksandar Markovic
d67da33786 target/mips: Add bit encoding for MXU accumulate add/sub 1-bit pattern 'aptn1'
Add bit encoding for MXU accumulate add/subtract 1-bit pattern
'aptn1'.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:47 +01:00
Aleksandar Markovic
03f400883a target/mips: Add MXU decoding engine
Add MXU decoding engine: add handlers for all instruction pools,
and main decode handler. The handlers, for now, for the purpose
of this patch, contain only sceleton in the form of a single
switch statement.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:47 +01:00
Aleksandar Markovic
0a348b9a4e target/mips: Add and integrate MXU decoding engine placeholder
Provide the placeholder and add the invocation logic for MXU
decoding engine.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:47 +01:00
Aleksandar Markovic
eab0bdb07c target/mips: Amend MXU instruction opcodes
Amend MXU instruction opcodes. Pool04 is actually only instruction
OPC_MXU_S16MAD. Two cases within S16MAD are recognized by 1-bit
subfield 'aptn1'.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:47 +01:00
Craig Janeczek
a031ac6161 target/mips: Define a bit for MXU in insn_flags
Define a bit for MXU in insn_flags. This is the first non-MIPS
(third party) ASE supported in QEMU for MIPS, so it is placed in
the section "bits 56-63: vendor-specific ASEs".

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:47 +01:00
Craig Janeczek
eb5559f67d target/mips: Introduce MXU registers
Define and initialize the 16 MXU registers - 15 general computational
register, and 1 control register). There is also a zero register, but
it does not have any corresponding variable.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:47 +01:00
Aleksandar Markovic
2431a422d3 target/mips: Add two missing breaks for NM_LLWPE and NM_SCWPE decoder cases
Coverity found two fallthroughs that miss break statement. Fix them.

Revieved-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-29 14:13:30 +01:00
Aleksandar Markovic
89a955e8df target/mips: Add disassembler support for nanoMIPS
Add disassembler support for nanoMIPS.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Matthew Fortune <matthew.fortune@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-25 22:13:33 +02:00
Dimitrije Nikolic
d046a9ea1b target/mips: Implement emulation of nanoMIPS EVA instructions
Implement emulation of nanoMIPS EVA instructions. They are all
part of P.LS.E0 instruction pool, or one of its subpools.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-25 22:13:33 +02:00
Aleksandar Markovic
ba1e81171f target/mips: Add nanoMIPS CRC32 instruction pool
Add nanoMIPS CRC32 instruction pool.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-25 22:13:33 +02:00
Aleksandar Markovic
373ecd3823 target/mips: Fix decoding of ALIGN and DALIGN instructions
Opcode for ALIGN and DALIGN must be in fact ranges of opcodes, to
allow paremeter 'bp' to occupy two and three bits, respectively.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:32 +02:00
Aleksandar Markovic
ab99e0e44b target/mips: Fix the title of translate.c
Replace MIPS32 with MIPS, since the file covers all generations
of MIPS architectures.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:31 +02:00
Fredrik Noring
ed4f49ba9b target/mips: Define the R5900 CPU
The primary purpose of this change is to support programs compiled by
GCC for the R5900 target and thereby run R5900 Linux distributions, for
example Gentoo.

GCC in version 7.3, by itself, by inspection of the GCC source code
and inspection of the generated machine code, for the R5900 target,
only emits two instructions that are specific to the R5900: the three-
operand MULT and MULTU. GCC and libc also emit certain MIPS III
instructions that are not part of the R5900 ISA. They are normally
trapped and emulated by the Linux kernel, and therefore need to be
treated accordingly by QEMU.

A program compiled by GCC is taken to mean source code compiled by GCC
under the restrictions above. One can, with the apparent limitations,
with a bit of effort obtain a fully functioning operating system such
as R5900 Gentoo. Strictly speaking, programs need not be compiled by
GCC to make use of this change.

Instructions and other facilities of the R5900 not implemented by this
change are intended to signal provisional exceptions. One such example
is the FPU that is not compliant with IEEE 754-1985 in system mode. It
is therefore provisionally disabled. In user space the FPU is trapped
and emulated by IEEE 754-1985 compliant software in the kernel, and
this is handled accordingly by QEMU. Another example is the 93
multimedia instructions specific to the R5900 that generate provisional
reserved instruction exception signals.

One of the benefits of running a Linux distribution under QEMU is that
programs can be compiled with a native compiler, where the host and
target are the same, as opposed to a cross-compiler, where they are
not the same. This is especially important in cases where the target
hardware does not have the resources to run a native compiler.

Problems with cross-compilation are often related to host and target
differences in integer sizes, pointer sizes, endianness, machine code,
ABI, etc. Sometimes cross-compilation is not even supported by the
build script for a given package. One effective way to avoid those
problems is to replace the cross-compiler with a native compiler. This
change of compilation methods does not resolve the inherent problems
with cross-compilation.

The native compiler naturally replaces the cross-compiler, because one
typically uses one or the other, and preferably the native compiler
when the circumstances admit this. The native compiler is also a good
test case for the R5900 QEMU user mode. Additionally, Gentoo is well-
known for compiling and installing its packages from sources.

This change has been tested with Gentoo compiled for R5900, including
native compilation of several packages under QEMU.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:31 +02:00
Fredrik Noring
96631327be target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user only
The Linux kernel traps certain reserved instruction exceptions to
emulate the corresponding instructions. QEMU plays the role of the
kernel in user mode, so those traps are emulated by accepting the
instructions.

This change adds the function check_insn_opc_user_only to signal a
reserved instruction exception for flagged CPUs in QEMU system mode.

The MIPS III instructions DMULT[U], DDIV[U], LL[D] and SC[D] are not
implemented in R5900 hardware. They are trapped and emulated by the
Linux kernel and, accordingly, therefore QEMU user only instructions.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:31 +02:00
Fredrik Noring
5601e6217d target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IV
The R5900 is taken to be MIPS III with certain modifications. From
MIPS IV it implements the instructions MOVN, MOVZ and PREF.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:31 +02:00
Fredrik Noring
be9c42c90d target/mips: Support R5900 DIV1 and DIVU1 instructions
Add support for DIV1 and DIVU1 instructions.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:31 +02:00
Fredrik Noring
8d927f7cb4 target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructions
Add support for MFLO1, MTLO1, MFHI1 and MTHI1 instructions.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:31 +02:00
Fredrik Noring
06de726b2d target/mips: Support R5900 three-operand MULT1 and MULTU1 instructions
Add support for MULT1 and MULTU1 instructions.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:31 +02:00
Fredrik Noring
21e8e8b230 target/mips: Support R5900 three-operand MULT and MULTU instructions
The three-operand MULT and MULTU are the only R5900-specific
instructions emitted by GCC 7.3. The R5900 also implements the three-
operand MADD and MADDU instructions, but they are omitted in QEMU for
now since they are absent in programs compiled by current GCC versions.

Likewise, the R5900-specific pipeline 1 instruction variants MULT1,
MULTU1, DIV1, DIVU1, MADD1, MADDU1, MFHI1, MFLO1, MTHI1 and MTLO1
are omitted here as well.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:31 +02:00
Fredrik Noring
ec1944fc8e target/mips: Add a placeholder for R5900 MMI3 instruction subclass
Add a placeholder for MMI3 subclass.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:31 +02:00
Fredrik Noring
6c1e48d38a target/mips: Add a placeholder for R5900 MMI2 instruction subclass
Add a placeholder for MMI2 subclass.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:30 +02:00
Fredrik Noring
7a803ca23a target/mips: Add a placeholder for R5900 MMI1 instruction subclass
Add a placeholder for MM1 subclass.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:30 +02:00
Fredrik Noring
88eafe0b28 target/mips: Add a placeholder for R5900 MMI0 instruction subclass
Add a placeholder for MMI0 subclass.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:30 +02:00
Fredrik Noring
71b8a6b3f3 target/mips: Add a placeholder for R5900 MMI instruction class
Add a placeholder for MMI class. This is the main palceholder for
MMI ASE.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:30 +02:00
Fredrik Noring
f08099ad7a target/mips: Add a placeholder for R5900 LQ
Add a placeholder for LQ instruction.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:30 +02:00
Fredrik Noring
bb41e74b66 target/mips: Add a placeholder for R5900 SQ, handle user mode RDHWR
Add placeholder for SQ instruction, handle RDHWR.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:30 +02:00
Fredrik Noring
dd581bf97d target/mips: Define R5900 MMI3 opcode constants
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:30 +02:00
Fredrik Noring
6c03ef6aaa target/mips: Define R5900 MMI2 opcode constants
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:30 +02:00
Fredrik Noring
7759654112 target/mips: Define R5900 MMI1 opcode constants
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:30 +02:00
Fredrik Noring
3ef65697a1 target/mips: Define R5900 MMI0 opcode constants
Add definition of MI0 opcodes.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:30 +02:00
Fredrik Noring
d329721172 target/mips: Define R5900 MMI<0|1|2|3> subclasses and opcode constants
Define MMI0, MMI1, MMI2, MMI3 subclass opcodes, and other opcodes of
instructions in MMI class.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:19:35 +02:00
Fredrik Noring
f99c0d6da3 target/mips: Define R5900 MMI class, and LQ and SQ opcode constants
Define MMI class, LQ, and SQ R5900 opdoces.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:07:42 +02:00
Fredrik Noring
497f072b15 target/mips: Add R5900 Multimedia Instruction overview note
Add a comment on R5900 MMI ASE (short overview).

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:07:42 +02:00
Fredrik Noring
6f692818a7 target/mips: Define R5900 ISA, MMI ASE, and R5900 CPU preprocessor constants
The R5900 implements the 64-bit MIPS III instruction set except
DMULT, DMULTU, DDIV, DDIVU, LL, SC, LLD and SCD. The MIPS IV
instructions MOVN, MOVZ and PREF are implemented. It has the
R5900-specific three-operand instructions MADD, MADDU, MULT and
MULTU as well as pipeline 1 versions MULT1, MULTU1, DIV1, DIVU1,
MADD1, MADDU1, MFHI1, MFLO1, MTHI1 and MTLO1. A set of 93 128-bit
multimedia instructions specific to the R5900 is also implemented.

The Toshiba TX System RISC TX79 Core Architecture manual:

https://wiki.qemu.org/File:C790.pdf

describes the C790 processor that is a follow-up to the R5900. There
are a few notable differences in that the R5900 FPU

- is not IEEE 754-1985 compliant,
- does not implement double format, and
- its machine code is nonstandard.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:07:42 +02:00
Dimitrije Nikolic
0d30b3bbc5 target/mips: Add opcodes for nanoMIPS EVA instructions
Add opcodes for nanoMIPS EVA instructions: CACHEE, LBE, LBUE, LHE,
LHUE, LLE, LLWPE, LWE, PREFE, SBE, SCE, SCWPE, SHE, SWE.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Stefan Markovic
d5ebcbaf09 target/mips: Fix misplaced 'break' in handling of NM_SHRA_R_PH
Fix misplaced 'break' in handling of NM_SHRA_R_PH. Found by
Coverity (CID 1395627).

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Matthew Fortune
fdac60cd04 target/mips: Fix emulation of microMIPS R6 <SELEQZ|SELNEZ>.<D|S>
Fix emulation of microMIPS R6 <SELEQZ|SELNEZ>.<D|S> instructions.
Their handling was permuted.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Matthew Fortune <matthew.fortune@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Yongbok Kim
074cfcb4da target/mips: Implement hardware page table walker for MIPS32
Implement hardware page table walker. This implementation is
limiter only to MIPS32.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Yongbok Kim
6301079557 target/mips: Add reset state for PWSize and PWField registers
Add reset state for PWSize and PWField registers. The reset state
is different for pre-R6 and R6 (and post-R6) ISAa.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Yongbok Kim
103be64c26 target/mips: Add CP0 PWCtl register
Add PWCtl register (CP0 Register 5, Select 6).

The PWCtl register configures hardware page table walking for TLB
refills.

This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:

PWEn     (31)   - Hardware Page Table walker enable
PWDirExt (30)   - If 1, 4-th level implemented (MIPS64 only)
XK       (28)   - If 1, walker handles xkseg (MIPS64 only)
XS       (27)   - If 1, walker handles xsseg (MIPS64 only)
XU       (26)   - If 1, walker handles xuseg (MIPS64 only)
DPH      (7)    - Dual Page format of Huge Page support
HugePg   (6)    - Huge Page PTE supported in Directory levels
PSn      (5..0) - Bit position of PTEvld in Huge Page PTE

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Yongbok Kim
20b28ebc49 target/mips: Add CP0 PWSize register
Add PWSize register (CP0 Register 5, Select 7).

The PWSize register configures hardware page table walking for TLB
refills.

This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:

BDW  (37..32) Base Directory index width (MIPS64 only)
GDW  (29..24) Global Directory index width
UDW  (23..18) Upper Directory index width
MDW  (17..12) Middle Directory index width
PTW  (11..6 ) Page Table index width
PTEW ( 5..0 ) Left shift applied to the Page Table index

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Yongbok Kim
fa75ad1459 target/mips: Add CP0 PWField register
Add PWField register (CP0 Register 5, Select 6).

The PWField register configures hardware page table walking for TLB
refills.

This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:

MIPS64:
BDI  (37..32) - Base Directory index
GDI  (29..24) - Global Directory index
UDI  (23..18) - Upper Directory index
MDI  (17..12) - Middle Directory index
PTI  (11..6 ) - Page Table index
PTEI ( 5..0 ) - Page Table Entry shift

MIPS32:
GDW  (29..24) - Global Directory index
UDW  (23..18) - Upper Directory index
MDW  (17..12) - Middle Directory index
PTW  (11..6 ) - Page Table index
PTEW ( 5..0 ) - Page Table Entry shift

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Yongbok Kim
5e31fdd59f target/mips: Add CP0 PWBase register
Add PWBase register (CP0 Register 5, Select 5).

The PWBase register contains the Page Table Base virtual address.

This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Stefan Markovic
49735f76db target/mips: Add CP0 Config2 to DisasContext
Add field corresponding to CP0 Config2 to DisasContext. This is
needed for availability control via Config2 bits.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Stefan Markovic
908f6be1b9 target/mips: Improve DSP R2/R3-related naming
Do following replacements:

ASE_DSPR2 -> ASE_DSP_R2
ASE_DSPR3 -> ASE_DSP_R3
MIPS_HFLAG_DSPR2 -> MIPS_HFLAG_DSP_R2
MIPS_HFLAG_DSPR3 -> MIPS_HFLAG_DSP_R3
check_dspr2() -> check_dsp_r2()
check_dspr3() -> check_dsp_r3()

and several other similar minor replacements.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Stefan Markovic
59e781fbf1 target/mips: Add availability control for DSP R3 ASE
Add infrastructure for availability control for DSP R3 ASE MIPS
instructions. Only BPOSGE32C currently belongs to DSP R3 ASE, but
this is likely to be changed in near future.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Stefan Markovic
6208f09441 target/mips: Add bit definitions for DSP R3 ASE
Add DSP R3 ASE related bit definition for insn_flags and hflags.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Philippe Mathieu-Daudé
45ebdd24c3 target/mips: Reorganize bit definitions for insn_flags (ISAs/ASEs flags)
Distribute bits 56-63 vendor-specific ASEs as follows:

  - bits 0-31 MIPS base instruction sets
  - bits 32-47 MIPS ASEs
  - bits 48-55 vendor-specific base instruction sets
  - bits 56-63 vendor-specific ASEs

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Philippe Mathieu-Daudé
f9c9cd63e3 target/mips: Increase 'supported ISAs/ASEs' flag holder size
Increase the size of insn_flags holder size to 64 bits. This is
needed for future extensions since existing bits are almost all used.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Aleksandar Markovic
8bacd1ffc7 target/mips: Add opcode values of MXU ASE
Add opcode values for all instructions in MXU ASE.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Aleksandar Markovic
9ef5bff97b target/mips: Add organizational chart of MXU ASE
Add a comment that contains an organizational chart of MXU ASE
instructions.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Aleksandar Markovic
1d0e663c5f target/mips: Add assembler mnemonics list for MXU ASE
Add a comment that contains a list all MXU instructions,
expressed in assembler mnemonics.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Aleksandar Markovic
b158d449bb target/mips: Add basic description of MXU ASE
Add a comment that contains a basic description of MXU ASE.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Aleksandar Markovic
50e7edc5ac target/mips: Add a comment before each CP0 register section in cpu.h
Add a comment before each CP0 register section in CPUMIPSState
definition, thus visually separating these sections.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Aleksandar Markovic
a86d421e18 target/mips: Add a comment with an overview of CP0 registers
Add a comment with an overview of CP0 registers close to the
definition of their corresponding fields in CPUMIPSState.

Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18 20:37:20 +02:00
Stefan Markovic
d45942d908 target/mips: Add definition of nanoMIPS I7200 CPU
Add definition of the first nanoMIPS processor in QEMU.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
26324ded91 target/mips: Fix ERET/ERETNC behavior related to ADEL exception
Fix ERET/ERETNC so that ADEL exception can be raised.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
7a5f784aa2 target/mips: Add updating BadInstr and BadInstrX for nanoMIPS
Update BadInstr and BadInstrX registers for nanoMIPS. The same
support for pre-nanoMIPS remains unimplemented.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Dimitrije Nikolic
fb32f8c856 target/mips: Add availability control via bit NMS
A set of nanoMIPS instructions is not available if Config5 bit NMS
is set.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
0b591184a2 target/mips: Add emulation of DSP ASE for nanoMIPS - part 6
Add emulation of DSP ASE instructions for nanoMIPS - part 6.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
4c75c985d9 target/mips: Add emulation of DSP ASE for nanoMIPS - part 5
Add emulation of DSP ASE instructions for nanoMIPS - part 5.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
8b3698b294 target/mips: Add emulation of DSP ASE for nanoMIPS - part 4
Add emulation of DSP ASE instructions for nanoMIPS - part 4.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
2ed42efaae target/mips: Add emulation of DSP ASE for nanoMIPS - part 3
Add emulation of DSP ASE instructions for nanoMIPS - part 3.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
6d033ca751 target/mips: Add emulation of DSP ASE for nanoMIPS - part 2
Add emulation of DSP ASE instructions for nanoMIPS - part 2.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
3285a3e444 target/mips: Add emulation of DSP ASE for nanoMIPS - part 1
Add emulation of DSP ASE instructions for nanoMIPS - part 1.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
0a1a6ed78a target/mips: Implement MT ASE support for nanoMIPS
Add emulation of MT ASE instructions for nanoMIPS.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Aleksandar Rikalo
9affc1c592 target/mips: Fix pre-nanoMIPS MT ASE instructions availability control
Use bits from configuration registers for availability control
of MT ASE instructions, rather than only ISA_MT bit in insn_flags.
This is done by adding a field in hflags for MT bit, and adding
functions check_mt() and check_cp0_mt().

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
11d0fc10b7 target/mips: Add emulation of nanoMIPS 32-bit branch instructions
Add emulation of various flavors of nanoMIPS 32-bit branch
instructions.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Aleksandar Rikalo
0b16dcd180 target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair
Implement support for nanoMIPS LLWP/SCWP instructions. Beside
adding core functionality of these instructions, this patch adds
support for availability control via configuration bit XNP.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Dimitrije Nikolic
ab77fc611b target/mips: Add CP0 Config3 and Config5 fields to DisasContext structure
Add CP0_Config3 and CP0_Config5 to DisasContext structure. This is
needed for implementing availability control of various instructions.

Reviewed-by: "Aleksandar Markovic <amarkovic@wavecomp.com>"
Signed-off-by: "Aleksandar Markovic <amarkovic@wavecomp.com>"
2018-08-24 17:51:59 +02:00
Yongbok Kim
8f1d9b6d63 target/mips: Add emulation of nanoMIPS 32-bit load and store instructions
Add emulation of various nanoMIPS load and store instructions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
James Hogan
821f2008c3 target/mips: Implement emulation of nanoMIPS EXTW instruction
Implement emulation of nanoMIPS EXTW instruction. EXTW instruction
is similar to the MIPS r6 ALIGN instruction, except that it counts
the other way and in bits instead of bytes. We therefore generalise
gen_align() function into a new gen_align_bits() function (which
counts in bits instead of bytes and optimises when bits = size of
the word), and implement gen_align() and a new gen_ext() based on
that. Since we need to know the word size to check for when the
number of bits == the word size, the opc argument is replaced with
a wordsz argument (either 32 or 64).

Signed-off-by: James Hogan <james.hogan@mips.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24 17:51:59 +02:00
Matthew Fortune
e222f50672 target/mips: Implement emulation of nanoMIPS ROTX instruction
Added a helper for ROTX based on the pseudocode from the
architecture spec. This instraction was not present in previous
MIPS instruction sets.

Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24 17:51:59 +02:00
Yongbok Kim
eac5266459 target/mips: Add emulation of misc nanoMIPS instructions (p_lsx)
Add emulation of nanoMIPS instructions situated in pool p_lsx, and
emulation of LSA instruction as well.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
642241870a target/mips: Add emulation of misc nanoMIPS instructions (pool32axf)
Add emulation of misc nanoMIPS instructions situated in pool32axf.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
e0cf0e6586 target/mips: Add emulation of misc nanoMIPS instructions (pool32a0)
Add emulation of nanoMIPS instructions that are situated in pool32a0.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
579b8ea97a target/mips: Add emulation of nanoMIPS FP instructions
Add emulation of basic floating point arithmetic for nanoMIPS.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
7ef009b2dd target/mips: Add emulation of nanoMIPS 48-bit instructions
Add emulation of LI48, ADDIU48, ADDIUGP48, ADDIUPC48, LWPC48, and
SWPC48 instructions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
4d18232ca0 target/mips: Add emulation of nanoMIPS instructions MOVE.P and MOVE.PREV
Add emulation of nanoMIPS instructions MOVE.P and MOVE.PREV.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
c028098303 target/mips: Add emulation of some common nanoMIPS 32-bit instructions
Add emulation of SIGRIE, SYSCALL, BREAK, SDBBP, ADDIU, ADDIUPC,
ADDIUGP.W, LWGP, SWGP, ORI, XORI, ANDI, and other instructions.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
bf0718c59a target/mips: Add emulation of nanoMIPS 16-bit save and restore instructions
Add emulation of SAVE16 and RESTORE.JRC16 instructions. Routines
gen_save(), gen_restore(), and gen_adjust_sp() are provided to support
this feature.

This patch at the same time provides function gen_op_addr_addi(). This
function will be used in emulation of some other nanoMIPS instructions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
80845edf37 target/mips: Add emulation of nanoMIPS 16-bit logic instructions
Add emulation of NOT16, AND16, XOR16, OR16 instructions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
8bdb7029c3 target/mips: Add emulation of nanoMIPS 16-bit load and store instructions
Add emulation of LWXS16, LB16, SB16, LBU16, LH16, SH16, LHU16, LW16, LWSP16,
LW4X4, SW4X4, LWGP16, SWSP16, SW16, and SWGP16 instructions.

Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
8869ad02bf target/mips: Add emulation of nanoMIPS 16-bit misc instructions
Add emulation of misc nanoMIPS 16-bit instructions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
c46562fb2f target/mips: Add emulation of nanoMIPS 16-bit shift instructions
Add emulation of nanoMIPS 16-bit shift instructions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
764371d24c target/mips: Add emulation of nanoMIPS 16-bit branch instructions
Add emulation of nanoMIPS 16-bit branch instructions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
ea4ca3c226 target/mips: Add emulation of nanoMIPS 16-bit arithmetic instructions
Add emulation of nanoMIPS 16-bit arithmetic instructions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Aleksandar Markovic
6bfa9f4c9c target/mips: Add nanoMIPS decoding and extraction utilities
Add some basic utility functions and macros for nanoMIPS decoding
engine.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Aleksandar Markovic
c533c0f474 target/mips: Add placeholder and invocation of decode_nanomips_opc()
Add empty body and invocation of decode_nanomips_opc() if the bit
ISA_NANOMIPS32 is set in ctx->insn_flags.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
0bbc039680 target/mips: Prevent switching mode related to Config3 ISA bit for nanoMIPS
Only if Config3.ISA is 3 (microMIPS), the mode should be switched in
cpu_state_reset(). Config3.ISA is 1 for nanoMIPS processors, and no mode
change should happen.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Stefan Markovic
b3979b6fc3 target/mips: Add nanoMIPS DSP ASE opcodes
Add nanoMIPS opcodes for DSP ASE instruction pools and instructions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
261c95a0e9 target/mips: Add nanoMIPS base instruction set opcodes
Add nanoMIPS opcodes. nanoMIPS instruction are organized by so-called
instruction pools. Each pool contains a set of opcodes, that in turn
can be instruction opcodes or instruction pool opcodes.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Aleksandar Markovic
fa7c0c9f5b target/mips: Add preprocessor constants for nanoMIPS
Add ISA_NANOMIPS32 and CPU_NANOMIPS32 preprocessor constants.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24 17:51:59 +02:00
Yongbok Kim
59488dda1f target/mips: Check ELPA flag only in some cases of MFHC0 and MTHC0
MFHC0 and MTHC0 used to handle EntryLo0 and EntryLo1 registers only,
and placing ELPA flag checks before switch statement were technically
correct. However, after adding handling more registers, these checks
should be moved to act only in cases of handling EntryLo0 and
EntryLo1.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-16 19:18:45 +02:00
Yongbok Kim
e807bcc151 target/mips: Don't update BadVAddr register in Debug Mode
BadVAddr should not be updated if (env->hflags & MIPS_HFLAG_DM) is
set.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-16 19:18:45 +02:00
Stefan Markovic
fa192d4974 target/mips: Implement CP0 Config1.WR bit functionality
Add testing Config1.WR bit into watch exception handling logic.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-16 19:18:45 +02:00
Stefan Markovic
25beba9bf7 target/mips: Add CP0 BadInstrX register
Add CP0 BadInstrX register. This register will be used in nanoMIPS.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-16 19:18:45 +02:00
Aleksandar Markovic
0413d7a55a target/mips: Update some CP0 registers bit definitions
Update CP0 registers Config0, Config1, Config2, Config3,
Config4, and Config5 bit definitions.

Some of these bits will be utilized by upcoming nanoMIPS changes.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-16 19:18:45 +02:00
Aleksandar Markovic
e1555d7ddf target/mips: Fix two instances of shadow variables
Fix two instances of shadow variables. This cleans up entire file
translate.c from shadow variables.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-16 19:18:45 +02:00
Aleksandar Markovic
146dd620db target/mips: Mark switch fallthroughs with interpretable comments
Mark switch fallthroughs with comments, in cases fallthroughs
are intentional.

The comments "/* fall through */" are interpreted by compilers and
other tools, and they will not issue warnings in such cases. For gcc,
the warning is turnend on by -Wimplicit-fallthrough. With this patch,
there will be no such warnings in target/mips directory. If such
warning appears in future, it should be checked if it is intentional,
and, if yes, marked with a comment similar to those from this patch.

The comment must be just before next "case", otherwise gcc won't
understand it.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-16 19:18:45 +02:00
Aleksandar Rikalo
c38a1d5223 target/mips: Avoid case statements formulated by ranges - part 2
Remove "range style" case statements to make code analysis easier.
This patch handles cases when the values in the range in question
were not properly defined.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <amarkovic@wavecomp.com>
2018-08-16 19:18:45 +02:00
Aleksandar Markovic
c2e19f3c2b target/mips: Avoid case statements formulated by ranges - part 1
Remove "range style" case statements to make code analysis easier.

This is needed also for some upcoming nanoMIPS-related refactorings.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-16 19:18:45 +02:00
Yongbok Kim
8e0b373f8a target/mips: Fix gdbstub to read/write 64 bit FP registers
Fix gdbstub to read/write 64 bit FP registers

Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Reviewed-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
2018-06-27 20:13:50 +02:00
Yongbok Kim
72e1f16f18 target/mips: Fix data type for offset
Offset can be larger than 16 bit from nanoMIPS,
and immediate field can be larger than 16 bits as well.

Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
2018-06-27 20:13:41 +02:00
Yongbok Kim
b52d3bfa2d target/mips: Update gen_flt_ldst()
Update gen_flt_ldst() in order to reuse the functions for nanoMIPS

Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
2018-06-27 20:13:17 +02:00
Yongbok Kim
0305d194be target/mips: Fix microMIPS on reset
Fix to activate microMIPS on reset when Config3.ISA == {1, 3}

Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Reviewed-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
2018-06-27 20:12:57 +02:00
Yongbok Kim
f48a2cb218 target/mips: Raise a RI when given fs is n/a from CTC1
Fix to raise a Reserved Instruction exception when given fs is not
available from CTC1.

Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Reviewed-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
2018-06-27 20:12:43 +02:00
Richard Henderson
07ea28b418 tcg: Pass tb and index to tcg_gen_exit_tb separately
Do the cast to uintptr_t within the helper, so that the compiler
can type check the pointer argument.  We can also do some more
sanity checking of the index argument.

Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-01 15:15:27 -07:00
Peter Maydell
9802316ed6 trivial patches for 2018-05-20
-----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAlsBEgAPHG1qdEB0bHMu
 bXNrLnJ1AAoJEHAbT2saaT5Z74oH/1rKw64XSout5P3RNbhy8LjDfhu/wxtda8oR
 I3e/KbAOsmdU956Bvzk9eiL6gYyG2LrXgY5mJYaY5b+IwRZZEoywRvUX042fSEU0
 Hdkrjx8MpAVPN0RztLM2UDQta2NPv9uBc/X9tMR+brRnLID6qXDdd1tjKG5e8vDt
 iAfEgGdSg1opJlEyhOI3EPokdGa0QnrBgdPnEqhxtTWNhWWPxbdRVVTeyzJYOztC
 sM647Ca6P5y+0lBQNB4CXydiAR0GnE/SS1krFWbrpuI6rbOwzBOsPTi84JtwQzv+
 VWjmXfjnXy5c0+DG93e0sS6vqJF4V2ZoHKca2VVzLcBFPUxmZPw=
 =MQI4
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging

trivial patches for 2018-05-20

# gpg: Signature made Sun 20 May 2018 07:13:20 BST
# gpg:                using RSA key 701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* remotes/mjt/tags/trivial-patches-fetch: (22 commits)
  acpi: fix a comment about aml_call0()
  qapi/net.json: Fix the version number of the "vlan" removal
  gdbstub: Handle errors in gdb_accept()
  gdbstub: Use qemu_set_cloexec()
  replace functions which are only available in glib-2.24
  typedefs: Remove PcGuestInfo from qemu/typedefs.h
  qemu-options: Allow -no-user-config again
  hw/timer/mt48t59: Fix bit-rotten NVRAM_PRINTF format strings
  Remove unnecessary variables for function return value
  trivial: Do not include pci.h if it is not necessary
  tests: fix tpm-crb tpm-tis tests race
  hw/ide/ahci: Keep ALLWINNER_AHCI() macro internal
  qemu-img-cmds.hx: add passive-aggressive note
  qemu-img: Make documentation between .texi and .hx consistent
  qemu-img: remove references to GEN_DOCS
  qemu-img.texi: fix command ordering
  qemu-img-commands.hx: argument ordering fixups
  HACKING: document preference for g_new instead of g_malloc
  qemu-option-trace: -trace enable= is a pattern, not a file
  slirp/debug: Print IP addresses in human readable form
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-21 10:50:32 +01:00
Laurent Vivier
4a4ff4c58f Remove unnecessary variables for function return value
Re-run Coccinelle script scripts/coccinelle/return_directly.cocci

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
ppc part
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-05-20 08:48:13 +03:00
Richard Henderson
1cc5af6902 target/mips: Honor CPU_DUMP_FPU
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-18 14:52:38 -07:00
Richard Henderson
4accd4a89f target/mips: Remove floatX_maybe_silence_nan from conversions
This is now handled properly by the generic softfloat code.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:27:15 -07:00
Peter Maydell
9ba1733a76 * Don't silently truncate extremely long words in the command line
* dtc configure fixes
 * MemoryRegionCache second try
 * Deprecated option removal
 * add support for Hyper-V reenlightenment MSRs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJa9Y2qAAoJEL/70l94x66Df8EIAI4pi+zf1mTlH0Koi+oqOg+d
 geBC6N9IA+n1p90XERnPbuiT19NjON2R1Z907SbzDkijxdNRoYUoQf7Z+ZBTENjn
 dYsVvgLYzajGLWWtJetPPaNFAqeF2z8B3lbVQnGVLzH5pQQ2NS1NJsvXQA2LslLs
 2ll1CJ2EEBhayoBSbHK+0cY85f+DUgK/T1imIV2T/rwcef9Rw218nvPfGhPBSoL6
 tI2xIOxz8bBOvZNg2wdxpaoPuDipBFu6koVVbaGSgXORg8k5CEcKNxInztufdELW
 KZK5ORa3T0uqu5T/GGPAfm/NbYVQ4aTB5mddshsXtKbBhnbSfRYvpVsR4kQB/Hc=
 =oC1r
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Don't silently truncate extremely long words in the command line
* dtc configure fixes
* MemoryRegionCache second try
* Deprecated option removal
* add support for Hyper-V reenlightenment MSRs

# gpg: Signature made Fri 11 May 2018 13:33:46 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (29 commits)
  rename included C files to foo.inc.c, remove osdep.h
  pc-dimm: fix error messages if no slots were defined
  build: Silence dtc directory creation
  shippable: Remove Debian 8 libfdt kludge
  configure: Display if libfdt is from system or git
  configure: Really use local libfdt if the system one is too old
  i386/kvm: add support for Hyper-V reenlightenment MSRs
  qemu-doc: provide details of supported build platforms
  qemu-options: Remove deprecated -no-kvm-irqchip
  qemu-options: Remove deprecated -no-kvm-pit-reinjection
  qemu-options: Bail out on unsupported options instead of silently ignoring them
  qemu-options: Remove remainders of the -tdf option
  qemu-options: Mark -virtioconsole as deprecated
  target/i386: sev: fix memory leaks
  opts: don't silently truncate long option values
  opts: don't silently truncate long parameter keys
  accel: use g_strsplit for parsing accelerator names
  update-linux-headers: drop hyperv.h
  qemu-thread: always keep the posix wrapper layer
  exec: reintroduce MemoryRegion caching
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-14 09:55:09 +01:00
Paolo Bonzini
5b27a92dcc rename included C files to foo.inc.c, remove osdep.h
osdep.h is only needed for files that are compiled directly.
Remove it from included C source files, and rename them to
*.inc.c so that scripts/clean-includes knows to skip them.

Cc: Eric Blake <eblake@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-11 14:33:40 +02:00
Emilio G. Cota
18f440edfb target/mips: convert to TranslatorOps
Notes:

- DISAS_TOO_MANY replaces the former "break" in the translation loop.
  However, care must be taken not to overwrite a previous condition
  in is_jmp; that's why in translate_insn we first check is_jmp and
  return if it's != DISAS_NEXT.

- Added an assert in translate_insn, before exiting due to an exception,
  to make sure that is_jmp is set to DISAS_NORETURN (the exception
  generation function always sets it.)

- Added an assert for the default case in is_jmp's switch.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09 10:12:21 -07:00
Emilio G. Cota
12be92588c target/mips: use *ctx for DisasContext
No changes to the logic here; this is just to make the diff
that follows easier to read.

While at it, remove the unnecessary 'struct' in
'struct TranslationBlock'.

Note that checkpatch complains with a false positive:
  ERROR: space prohibited after that '&' (ctx:WxW)
  #75: FILE: target/mips/translate.c:20220:
  +    ctx->kscrexist = (env->CP0_Config4 >> CP0C4_KScrExist) & 0xff;
                                                              ^
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09 10:12:21 -07:00
Emilio G. Cota
eeb3bba847 target/mips: convert to DisasContextBase
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09 10:12:21 -07:00
Emilio G. Cota
b28425babc target/mips: convert to DisasJumpType
Notes:

- BS_EXCP in generate_exception_err and after hen_helper_wait
  becomes DISAS_NORETURN, because we do not return after
  raising an exception.

- Some uses of BS_EXCP are misleading in that they're used
  only as a "not BS_STOP" exit condition, i.e. they have nothing
  to do with an actual exception. For those cases, define
  and use DISAS_EXIT, which is clearer. With this and the
  above change, BS_EXCP goes away completely.

- fix a comment typo (s/intetrupt/interrupt/).

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09 10:12:21 -07:00
Emilio G. Cota
cd314a7d01 target/mips: use lookup_and_goto_ptr on BS_STOP
The TB after BS_STOP is not fixed (e.g. helper_mtc0_hwrena
changes hflags, which ends up changing the TB flags via
cpu_get_tb_cpu_state). This requires a full lookup (i.e.
with flags) via lookup_and_goto_ptr instead of gen_goto_tb,
since the latter only looks at the PC for in-page goto's. Fix it.

Reported-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09 10:12:21 -07:00
Emilio G. Cota
6cd79443d3 target/mips: avoid integer overflow in next_page PC check
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09 10:12:21 -07:00
Igor Mammedov
3f71e724e2 cpu: get rid of unused cpu_init() defines
cpu_init(cpu_model) were replaced by cpu_create(cpu_type) so
no users are left, remove it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-6-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-19 14:10:36 -03:00
Igor Mammedov
0dacec874f cpu: add CPU_RESOLVING_TYPE macro
it will be used for providing to cpu name resolving class for
parsing cpu model for system and user emulation code.

Along with change add target to null-machine tests, so
that when switch to CPU_RESOLVING_TYPE happens,
it would ensure that null-machine usecase still works.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu> (m68k)
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (tricore)
Message-Id: <1518000027-274608-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Added macro to riscv too]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-19 14:10:36 -03:00
Philippe Mathieu-Daudé
bf85388169 qdev: use device_class_set_parent_realize/unrealize/reset()
changes generated using the following Coccinelle patch:

  @@
  type DeviceParentClass;
  DeviceParentClass *pc;
  DeviceClass *dc;
  identifier parent_fn;
  identifier child_fn;
  @@
  (
  +device_class_set_parent_realize(dc, child_fn, &pc->parent_fn);
  -pc->parent_fn = dc->realize;
  ...
  -dc->realize = child_fn;
  |
  +device_class_set_parent_unrealize(dc, child_fn, &pc->parent_fn);
  -pc->parent_fn = dc->unrealize;
  ...
  -dc->unrealize = child_fn;
  |
  +device_class_set_parent_reset(dc, child_fn, &pc->parent_fn);
  -pc->parent_fn = dc->reset;
  ...
  -dc->reset = child_fn;
  )

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180114020412.26160-4-f4bug@amsat.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-05 13:54:38 +01:00
Laurent Vivier
98670d47cd accel/tcg: add size paremeter in tlb_fill()
The MC68040 MMU provides the size of the access that
triggers the page fault.

This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.

So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().

To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.

This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
2018-01-25 16:02:24 +01:00
Eric Blake
94f5c480e9 mips: Tweak location of ';' in macros
It is more typical to provide the ';' by the caller of a macro
than to embed it in the macro itself; this is because syntax
highlight engines can get confused if a macro is called without
a semicolon before the closing '}'.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20171201232433.25193-3-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-16 14:54:51 +01:00
Richard Henderson
f764718d0c tcg: Remove TCGV_UNUSED* and TCGV_IS_UNUSED*
These are now trivial sets and tests against NULL.  Unwrap.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29 12:43:39 -08:00
Peter Maydell
ab752f237d x86/cpu/numa queue, 2017-10-27
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZ8z/oAAoJECgHk2+YTcWmqGAQALy+nNFpQi048pydLmtbnv3y
 EDo4lsq29uimpcgim4GfZKLcrUygqVY6vorGsvRPw6/efWSzLoMHdsYee4cv5V6S
 fwXI6TIjyDbMZEoQ+TPf6zBPiGT7Ep5nMAl0zspvqZS7ssp0dWGrvAtpXzj3FFfB
 VwCs3eF7PILMBzMNeRoGrCweJu7mOMhTa7FF3o1FG135AoDljnL2oGj0TA/Z333N
 n3wOzl+rvXvYPGc8wEoixTzFQ1kw6vZwJk3sT77o+Zi2C0ihqcJ04F6cUFEyYdT3
 O+nH4rZcCWIEjHDYt4BgjfIigcih75zYHIFdMxzdfeofGThmf4UwnFl7LzJ1KF27
 RS3fnqZCGw41hUJ2usmSMkxbliXmohGczx+lN4/la/lSLp/LVoTxBhyfoMZHa8kL
 E52Waj2D1LfSg0KXJEYy8LgUrrLLABQ0fCEnZTSBcAlGJdd4m8nOTlbGjpovgwPf
 GKLiu6yHvfpoQuTyRHx/Nojq1UzhZ0BRm7N/2bJZWevvAsbGIP5TRXbnnwiMG5z5
 VRwwQ2vqG69SiI+gvjCvaJRGRbxuGANWYVUZAnjNuzL5V8WR+F7D3AaUlucp8Ui5
 7C822NHxvKxQoJvPRJspkrdoMu9FPkKdsFoOCywWJlZKn3mSxDkO1k1Gmw1UVSWi
 Ynvckz9k4NPG8ADj6ySE
 =ApN/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging

x86/cpu/numa queue, 2017-10-27

# gpg: Signature made Fri 27 Oct 2017 15:17:12 BST
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-and-machine-pull-request: (39 commits)
  x86: Skip check apic_id_limit for Xen
  numa: fixup parsed NumaNodeOptions earlier
  mips: r4k: replace cpu_model with cpu_type
  mips: mipssim: replace cpu_model with cpu_type
  mips: Magnum/Acer Pica 61: replace cpu_model with cpu_type
  mips: fulong2e: replace cpu_model with cpu_type
  mips: malta/boston: replace cpu_model with cpu_type
  mips: use object_new() instead of gnew()+object_initialize()
  sparc: leon3: use generic cpu_model parsing
  sparc: sparc: use generic cpu_model parsing
  sparc: sun4u/sun4v/niagara: use generic cpu_model parsing
  sparc: cleanup cpu type name composition
  tricore: use generic cpu_model parsing
  tricore: cleanup cpu type name composition
  unicore32: use generic cpu_model parsing
  unicore32: cleanup cpu type name composition
  xtensa: lx60/lx200/ml605/kc705: use generic cpu_model parsing
  xtensa: sim: use generic cpu_model parsing
  xtensa: cleanup cpu type name composition
  sh4: remove SuperHCPUClass::name field
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-30 10:11:22 +00:00
Igor Mammedov
a7519f2b39 mips: malta/boston: replace cpu_model with cpu_type
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1507211474-188400-37-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27 16:04:28 +02:00
Peter Maydell
6e6430a821 Capstone disassembler
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZ8bGHAAoJEGTfOOivfiFfOXQH/jc3BbQ+ulxvQSgA3rI2JE1e
 Ww5FK5HEs4qZU3hz4EtE2Cd5p7qV5I4tWRtbxzc6BGBwLsfz3a60Abx7726sZiH0
 ZuULTsWXQ/71XfZHQysgOSoy36G8xj/1yvrMWHjDCfWp/pzz479YXWSSn2TWEHpI
 jI6nKP5ALdv5XTAaglGaNzqVeWgjKXJn4O8qZFS7axj7hndzLFguymfm8rV8DAdd
 LRuYWOizzzJ0dcaO/HHyLTzSl7rR0g+DmcOAuFCREy4f+r6tXijwiirB5f7ZJiqc
 hgEBq/6NfztW2+pAUSxqI2Kuq1zVETTpZORH1+UxvVk9GPu1ouYldMx0NrYhDtc=
 =fC5W
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth/tags/pull-dis-20171026' into staging

Capstone disassembler

# gpg: Signature made Thu 26 Oct 2017 10:57:27 BST
# gpg:                using RSA key 0x64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-dis-20171026:
  disas: Add capstone as submodule
  disas: Remove monitor_disas_is_physical
  ppc: Support Capstone in disas_set_info
  arm: Support Capstone in disas_set_info
  i386: Support Capstone in disas_set_info
  disas: Support the Capstone disassembler library
  disas: Remove unused flags arguments
  target/arm: Don't set INSN_ARM_BE32 for CONFIG_USER_ONLY
  target/arm: Move BE32 disassembler fixup
  target/ppc: Convert to disas_set_info hook
  target/i386: Convert to disas_set_info hook

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	target/i386/cpu.c
#	target/ppc/translate_init.c
2017-10-27 08:04:51 +01:00
Richard Henderson
74d7fc7f63 tcg: Avoid setting tcg_initialize if !CONFIG_TCG
Fix the build for --disable-tcg.

Fixes: 55c3ceef61
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20171026135814.20773-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-26 17:47:36 +01:00
Richard Henderson
1d48474d8e disas: Remove unused flags arguments
Now that every target is using the disas_set_info hook,
the flags argument is unused.  Remove it.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25 11:55:09 +02:00
Richard Henderson
1c2adb958f tcg: Initialize cpu_env generically
This is identical for each target.  So, move the initialization to
common code.  Move the variable itself out of tcg_ctx and name it
cpu_env to minimize changes within targets.

This also means we can remove tcg_global_reg_new_{ptr,i32,i64},
since there are no longer global-register temps created by targets.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
b1311c4acf tcg: define tcg_init_ctx and make tcg_ctx a pointer
Groundwork for supporting multiple TCG contexts.

The core of this patch is this change to tcg/tcg.h:

> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;

Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
c5a49c63fa tcg: convert tb->cflags reads to tb_cflags(tb)
Convert all existing readers of tb->cflags to tb_cflags, so that we
use atomic_read and therefore avoid undefined behaviour in C11.

Note that the remaining setters/getters of the field are protected
by tb_lock, and therefore do not need conversion.

Luckily all readers access the field via 'tb->cflags' (so no foo.cflags,
bar->cflags in the code base), which makes the conversion easily
scriptable:

FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \
	 accel/tcg/translator.c | cut -f1 -d':' | sort | uniq)

perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES
perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES

Then manually fixed the few errors that checkpatch reported.

Compile-tested for all targets.

Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:41 -07:00
Richard Henderson
55c3ceef61 qom: Introduce CPUClass.tcg_initialize
Move target cpu tcg initialization to common code,
called from cpu_exec_realizefn.

Acked-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 22:00:13 +02:00
Richard Henderson
18e80c55bb linux-user: Tidy and enforce reserved_va initialization
We had a check using TARGET_VIRT_ADDR_SPACE_BITS to make sure
that the allocation coming in from the command-line option was
not too large, but that didn't include target-specific knowledge
about other restrictions on user-space.

Remove several target-specific hacks in linux-user/main.c.

For MIPS and Nios, we can replace them with proper adjustments
to the respective target's TARGET_VIRT_ADDR_SPACE_BITS definition.

For ARM, we had no existing ifdef but I suspect that the current
default value of 0xf7000000 was chosen with this in mind.  Define
a workable value in linux-user/arm/, and also document why the
special case is required.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20170708025030.15845-3-rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2017-10-16 16:00:56 +03:00
Emilio G. Cota
7f11636dbe tcg: remove addr argument from lookup_tb_ptr
It is unlikely that we will ever want to call this helper passing
an argument other than the current PC. So just remove the argument,
and use the pc we already get from cpu_get_tb_cpu_state.

This change paves the way to having a common "tb_lookup" function.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10 07:37:10 -07:00
Philippe Mathieu-Daudé
8301ea444a qom/cpu: move cpu_model null check to cpu_class_by_name()
and clean every implementation.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170917232842.14544-1-f4bug@amsat.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-09 23:21:52 -03:00
Eric Blake
2a2be359c4 mips: Improve macro parenthesization
Although none of the existing macro call-sites were broken,
it's always better to write macros that properly parenthesize
arguments that can be complex expressions, so that the intended
order of operations is not broken.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-09-21 13:25:41 +01:00
Igor Mammedov
c4c8146cfd mips: replace cpu_mips_init() with cpu_generic_init()
now cpu_mips_init() reimplements subset of cpu_generic_init()
tasks, so just drop it and use cpu_generic_init() directly.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: use internal.h instead of cpu.h]
Tested-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-09-21 13:25:37 +01:00
Igor Mammedov
41da212c9c mips: MIPSCPU model subclasses
Register separate QOM types for each mips cpu model,
so it would be possible to reuse generic CPU creation
routines.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: use internal.h, use void* to hold cpu_def in MIPSCPUClass,
 mark MIPSCPU abstract, address Eduardo Habkost review]
Tested-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-09-21 13:25:30 +01:00
Philippe Mathieu-Daudé
df4dc10284 mips: call cpu_mips_realize_env() from mips_cpu_realizefn()
This changes the order between cpu_mips_realize_env() and
cpu_exec_initfn(), but cpu_exec_initfn() don't have anything that
depends on cpu_mips_realize_env() being called first.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-09-21 13:25:27 +01:00
Philippe Mathieu-Daudé
27e38392ca mips: split cpu_mips_realize_env() out of cpu_mips_init()
so it can be used in mips_cpu_realizefn() in the next commit

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-09-21 13:24:34 +01:00
Philippe Mathieu-Daudé
26aa3d9aec mips: introduce internal.h and cleanup cpu.h
no logical change, only code movement (and fix a comment typo).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-09-21 13:24:34 +01:00
Philippe Mathieu-Daudé
5502b66fc7 mips: move hw/mips/cputimer.c to target/mips/
This timer is a required part of the MIPS32/MIPS64 System Control coprocessor
(CP0). Moving it with the other architecture related files will allow an opaque
use of CPUMIPSState* in the next commit (introduce "internal.h").

also remove it from 'user' targets, remove an unnecessary include.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-09-21 13:24:34 +01:00
Alistair Francis
288cb9490b target/mips: Convert VM clock update prints to warn_report
Convert the fprintf() messages in kvm_mips_update_state() to use
warn_report() as they aren't errors, but are just warnings.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: James Hogan <james.hogan@imgtec.com>
Message-Id: <e6acff8db6d264f913a18c86858b9aa600554e51.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19 14:09:34 +02:00
Alistair Francis
2ab4b13563 Convert single line fprintf(.../n) to warn_report()
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.

All of the warnings were changed using this command:
  find ./* -type f -exec sed -i \
    's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
    {} +

Some of the lines were manually edited to reduce the line length to below
80 charecters.

The #include lines were manually updated to allow the code to compile.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19 14:09:34 +02:00
James Hogan
d673a68db6 target/mips: Fix RDHWR CC with icount
RDHWR CC reads the CPU timer like MFC0 CP0_Count, so with icount enabled
it must set can_do_io while it calls the helper to avoid the "Bad icount
read" error. It should also break out of the translation loop to ensure
that timer interrupts are immediately handled.

Fixes: 2e70f6efa8 ("Add instruction counter.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02 22:18:13 +01:00
James Hogan
51ca717b07 target/mips: Drop redundant gen_io_start/stop()
DMTC0 CP0_Cause does a redundant gen_io_start() and gen_io_end() pair,
even though this is done for all DMTC0 operations outside of the switch
statement. Remove these redundant calls.

Fixes: 5dc5d9f055 ("mips: more fixes to the MIPS interrupt glue logic")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02 22:18:13 +01:00
James Hogan
b74cddcbf6 target/mips: Use BS_EXCP where interrupts are expected
Commit e350d8ca3a ("target/mips: optimize indirect branches") made
indirect branches able to directly find the next TB and jump straight to
it without breaking out of translated code and going around the main
execution loop. This breaks the assumption in target/mips/translate.c
that BS_STOP is sufficient to cause pending interrupts to be handled,
since interrupts are only checked in the main loop.

Fix a few of these assumptions by using gen_save_pc to update the saved
PC and using BS_EXCP instead of BS_STOP:

 - [D]MFC0 CP0_Count may trigger a timer interrupt which should be
   immediately handled.

 - [D]MTC0 CP0_Cause may trigger an interrupt (but in fact translation
   was only even being stopped in the DMTC0 case).

 - [D]MTC0 CP0_<any> when icount is used is assumed could potentially
   cause interrupts.

 - EI may trigger an interrupt which was pending. I specifically hit
   this case when running KVM nested in mipsel-softmmu. A timer
   interrupt while the 2nd guest was executing is caught by KVM which
   switches back to the normal Linux exception base and re-enables
   interrupts with EI. Since the above commit QEMU doesn't leave
   translated code until the nested KVM has already restored the KVM
   exception base and returned to the 2nd guest, at which point it is
   too late to check for pending interrupts and it gets stuck in an
   infinite loop of unhandled interrupts.

Something similar was needed for ARM in commit b29fd33db5
("target/arm: use DISAS_EXIT for eret handling").

Fixes: e350d8ca3a ("target/mips: optimize indirect branches")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02 22:18:12 +01:00
Leon Alrae
2d1847ec1c target-mips: apply CP0.PageMask before writing into TLB entry
PFN0 and PFN1 have to be masked out with PageMask_Mask.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[Yongbok Kim:
  Added commit message]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02 22:18:11 +01:00
James Hogan
d3d93c6c1e mips: Add KVM T&E segment support for TCG
MIPS KVM trap & emulate guest kernels have a different segment layout
compared with traditional MIPS kernels, to allow both the user and
kernel code to run from the user address segment without repeatedly
trapping to KVM.

QEMU currently supports this layout only for KVM, but its sometimes
useful to be able to run these kernels in QEMU on a PC, so enable it for
TCG too.

This also paves the way for MIPS KVM VZ support (which uses the normal
virtual memory layout) by abstracting whether user mode kernel segments
are in use.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
[Yongbok Kim:
  minor change]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02 22:18:06 +01:00
James Hogan
6743334568 mips: Improve segment defs for KVM T&E guests
Improve the segment definitions used by get_physical_address() to yield
target_ulong types, e.g. 0xffffffff80000000 instead of 0x80000000. This
is in preparation for enabling emulation of MIPS KVM T&E segments in TCG
MIPS targets, which unlike KVM could potentially have 64-bit
target_ulong. In such a case the offset guest KSEG0 address ends up at
e.g. 0x000000008xxxxxxx instead of 0xffffffff8xxxxxxx.

This also allows the casts to int32_t that force sign extension to be
removed, which removes any confusion due to relational comparison of
unsigned (target_ulong) and signed (int32_t) types.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02 17:01:27 +01:00
James Hogan
cb539fd241 target-mips: Don't stop on [d]mtc0 DESAVE/KScratch
Writing to the MIPS DESAVE register (and now the KScratch registers)
will stop translation, supposedly due to risk of execution mode
switches. However these registers are basically RW scratch registers
with no side effects so there is no risk of them triggering execution
mode changes.

Drop the bstate = BS_STOP for these registers for both mtc0 and dmtc0.

Fixes: 7a387fffce ("Add MIPS32R2 instructions, and generally straighten out the instruction decoding. This is also the first percent towards MIPS64 support.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02 17:01:27 +01:00
Philippe Mathieu-Daudé
87e0331c5a docs: fix broken paths to docs/devel/tracing.txt
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-31 13:12:53 +03:00
James Hogan
bad63a8008 target/mips: Enable CP0_EBase.WG on MIPS64 CPUs
Enable the CP0_EBase.WG (write gate) on the I6400 and MIPS64R2-generic
CPUs. This allows 64-bit guests to run KVM itself, which uses
CP0_EBase.WG to point CP0_EBase at XKPhys.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-21 03:23:44 +01:00
James Hogan
574da58e46 target/mips: Add EVA support to P5600
Add the Enhanced Virtual Addressing (EVA) feature to the P5600 core
configuration, along with the related Segmentation Control (SC) feature
and writable CP0_EBase.WG bit.

This allows it to run Malta EVA kernels.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-21 03:23:36 +01:00
James Hogan
480e79aedd target/mips: Implement segmentation control
Implement the optional segmentation control feature in the virtual to
physical address translation code.

The fixed legacy segment and xkphys handling is replaced with a dynamic
layout based on the segmentation control registers (which should be set
up even when the feature is not exposed to the guest).

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
  cosmetic changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
James Hogan
cec56a733d target/mips: Add segmentation control registers
The optional segmentation control registers CP0_SegCtl0, CP0_SegCtl1 &
CP0_SegCtl2 control the behaviour and required privilege of the legacy
virtual memory segments.

Add them to the CP0 interface so they can be read and written when
CP0_Config3.SC=1, and initialise them to describe the standard legacy
layout so they can be used in future patches regardless of whether they
are exposed to the guest.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
James Hogan
42c86612d5 target/mips: Add an MMU mode for ERL
The segmentation control feature allows a legacy memory segment to
become unmapped uncached at error level (according to CP0_Status.ERL),
and in fact the user segment is already treated in this way by QEMU.

Add a new MMU mode for this state so that QEMU's mappings don't persist
between ERL=0 and ERL=1.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
[yongbok.kim@imgtec.com:
  cosmetic changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
James Hogan
b0fc600322 target/mips: Abstract mmu_idx from hflags
The MIPS mmu_idx is sometimes calculated from hflags without an env
pointer available as cpu_mmu_index() requires.

Create a common hflags_mmu_index() for the purpose of this calculation
which can operate on any hflags, not just with an env pointer, and
update cpu_mmu_index() itself and gen_intermediate_code() to use it.

Also update debug_post_eret() and helper_mtc0_status() to log the MMU
mode with the status change (SM, UM, or nothing for kernel mode) based
on cpu_mmu_index() rather than directly testing hflags.

This will also allow the logic to be more easily updated when a new MMU
mode is added.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
James Hogan
9fbf4a58c9 target/mips: Check memory permissions with mem_idx
When performing virtual to physical address translation, check the
required privilege level based on the mem_idx rather than the mode in
the hflags. This will allow EVA loads & stores to operate safely only on
user memory from kernel mode.

For the cases where the mmu_idx doesn't need to be overridden
(mips_cpu_get_phys_page_debug() and cpu_mips_translate_address()), we
calculate the required mmu_idx using cpu_mmu_index(). Note that this
only tests the MIPS_HFLAG_KSU bits rather than MIPS_HFLAG_MODE, so we
don't test the debug mode hflag MIPS_HFLAG_DM any longer. This should be
fine as get_physical_address() only compares against MIPS_HFLAG_UM and
MIPS_HFLAG_SM, neither of which should get set by compute_hflags() when
MIPS_HFLAG_DM is set.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
James Hogan
8fffc64696 target/mips: Decode microMIPS EVA load & store instructions
Implement decoding of microMIPS EVA load and store instruction groups in
the POOL31C pool. These use the same gen_ld(), gen_st(), gen_st_cond()
helpers as the MIPS32 decoding, passing the equivalent MIPS32 opcodes as
opc.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
James Hogan
7696414729 target/mips: Decode MIPS32 EVA load & store instructions
Implement decoding of MIPS32 EVA loads and stores. These access the user
address space from kernel mode when implemented, so for each instruction
we need to check that EVA is available from Config5.EVA & check for
sufficient COP0 privilege (with the new check_eva()), and then override
the mem_idx used for the operation.

Unfortunately some Loongson 2E instructions use overlapping encodings,
so we must be careful not to prevent those from being decoded when EVA
is absent.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
James Hogan
dd4096cd2c target/mips: Prepare loads/stores for EVA
EVA load and store instructions access the user mode address map, so
they need to use mem_idx of MIPS_HFLAG_UM. Update the various utility
functions to allow mem_idx to be more easily overridden from the
decoding logic.

Specifically we add a mem_idx argument to the op_ld/st_* helpers used
for atomics, and a mem_idx local variable to gen_ld(), gen_st(), and
gen_st_cond().

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
James Hogan
74dbf824a1 target/mips: Add CP0_Ebase.WG (write gate) support
Add support for the CP0_EBase.WG bit, which allows upper bits to be
written (bits 31:30 on MIPS32, or bits 63:30 on MIPS64), along with the
CP0_Config5.CV bit to control whether the exception vector for Cache
Error exceptions is forced into KSeg1.

This is necessary on MIPS32 to support Segmentation Control and Enhanced
Virtual Addressing (EVA) extensions (where KSeg1 addresses may not
represent an unmapped uncached segment).

It is also useful on MIPS64 to allow the exception base to reside in
XKPhys, and possibly out of range of KSEG0 and KSEG1.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
  minor changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
James Hogan
9658e4c342 target/mips: Weaken TLB flush on UX,SX,KX,ASID changes
There is no need to invalidate any shadow TLB entries when the ASID
changes or when access to one of the 64-bit segments has been disabled,
since doing so doesn't reveal to software whether any TLB entries have
been evicted into the shadow half of the TLB.

Therefore weaken the tlb flushes in these cases to only flush the QEMU
TLB.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
James Hogan
eff6ff9431 target/mips: Fix TLBWI shadow flush for EHINV,XI,RI
Writing specific TLB entries with TLBWI flushes shadow TLB entries
unless an existing entry is having its access permissions upgraded. This
is necessary as software would from then on expect the previous mapping
in that entry to no longer be in effect (even if QEMU has quietly
evicted it to the shadow TLB on a TLBWR).

However it won't do this if only EHINV, XI, or RI bits have been set,
even if that results in a reduction of permissions, so add the necessary
checks to invoke the flush when these bits are set.

Fixes: 2fb58b7374 ("target-mips: add RI and XI fields to TLB entry")
Fixes: 9456c2fbcd ("target-mips: add TLBINV support")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
  cosmetic changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
James Hogan
e40df9a80b target/mips: Fix MIPS64 MFC0 UserLocal on BE host
Using MFC0 to read CP0_UserLocal uses tcg_gen_ld32s_tl, however
CP0_UserLocal is a target_ulong. On a big endian host with a MIPS64
target this reads and sign extends the more significant half of the
64-bit register.

Fix this by using ld_tl to load the whole target_ulong and ext32s_tl to
sign extend it, as done for various other target_ulong COP0 registers.

Fixes: d279279e2b ("target-mips: implement UserLocal Register")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-20 22:42:26 +01:00
Lluís Vilanova
9c489ea6be tcg: Pass generic CPUState to gen_intermediate_code()
Needed to implement a target-agnostic gen_intermediate_code()
in the future.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002025498.22386.18051908483085660588.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-19 14:45:16 -07:00
Aurelien Jarno
06a57e5cc7 target/mips: optimize WSBH, DSBH and DSHD
Use the same mask to avoid having to load two different constants.

Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2017-07-17 16:48:21 +02:00
Pavel Dovgalyuk
c6c2c0fc32 mips: set CP0 Debug DExcCode for SDBBP instruction
This patch fixes setting DExcCode field of CP0 Debug register
when SDBBP instruction is executed. According to EJTAG specification,
this field must be set to the value 9 (Bp).

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20170502120350.3368.92338.stgit@PASHA-ISP
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2017-07-17 16:48:21 +02:00
Miodrag Dinic
cab4888136 target/mips: fix msa copy_[s|u]_df rd = 0 corner case
This patch fixes the msa copy_[s|u]_df instruction emulation when
the destination register rd is zero. Without this patch the zero
register would get clobbered, which should never happen because it
is supposed to be hardwired to 0.

Fix this corner case by explicitly checking rd = 0 and effectively
making these instructions emulation no-op in that case.

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-07-11 15:06:34 +01:00
Sergio Andres Gomez Del Real
99f318322e vcpu_dirty: share the same field in CPUState for all accelerators
This patch simply replaces the separate boolean field in CPUState that
kvm, hax (and upcoming hvf) have for keeping track of vcpu dirtiness
with a single shared field.

Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com>
Message-Id: <20170618191101.3457-1-Sergio.G.DelReal@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-04 14:30:03 +02:00
Aurelien Jarno
e350d8ca3a target/mips: optimize indirect branches
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170430145254.25616-4-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05 09:25:42 -07:00
Aurelien Jarno
d9a9acde64 target/mips: optimize cross-page direct jumps in softmmu
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170430145254.25616-3-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05 09:25:42 -07:00
Yongbok Kim
075a1fe788 target/mips: fix delay slot detection in gen_msa_branch()
It is unnecessary to test R6 from delay/forbidden slot check
in gen_msa_branch().

https://bugs.launchpad.net/qemu/+bug/1663287

Reported-by: Brian Campbell <bacam@z273.org.uk>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-03-20 11:19:14 +00:00
Philippe Mathieu-Daudé
b44a7fb14e target-mips: replace few LOG_DISAS() with trace points
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-03-20 11:06:32 +00:00
Philippe Mathieu-Daudé
3570d7f667 target-mips: replace break by goto cp0_unimplemented
this fixes many warnings like:

target/mips/translate.c:6253:13: warning: Value stored to 'rn' is never read
            rn = "invalid sel";
            ^    ~~~~~~~~~~~~~

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-03-20 11:06:32 +00:00
Philippe Mathieu-Daudé
965447eecb target-mips: log bad coprocessor0 register accesses with LOG_UNIMP
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-03-20 11:06:32 +00:00
Philippe Mathieu-Daudé
989f2aa9af target-mips: remove old & unuseful comments
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-03-20 11:06:32 +00:00
Philippe Mathieu-Daudé
def74c0cf0 target-mips: fix compiler warnings (clang 5)
static code analyzer complain:

target/mips/helper.c:453:5: warning: Function call argument is an uninitialized value
    qemu_log_mask(CPU_LOG_MMU,
    ^~~~~~~~~~~~~~~~~~~~~~~~~~

'physical' and 'prot' are uninitialized if 'ret' is not TLBRET_MATCH.

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-03-20 11:06:32 +00:00
Yongbok Kim
d394698d73 target/mips: hold BQL for timer interrupts
Hold BQL when accessing timer which can cause interrupts

Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-03-09 10:41:48 +00:00
Paolo Bonzini
2ae41db262 KVM: do not use sigtimedwait to catch SIGBUS
Call kvm_on_sigbus_vcpu asynchronously from the VCPU thread.
Information for the SIGBUS can be stored in thread-local variables
and processed later in kvm_cpu_exec.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:02 +01:00
Paolo Bonzini
4d39892cca KVM: remove kvm_arch_on_sigbus
Build it on kvm_arch_on_sigbus_vcpu instead.  They do the same
for "action optional" SIGBUSes, and the main thread should never get
"action required" SIGBUSes because it blocks the signal.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:02 +01:00
Paul Burton
bed9e5ceb1 target-mips: Provide function to test if a CPU supports an ISA
Provide a new cpu_supports_isa function which allows callers to
determine whether a CPU supports one of the ISA_ flags, by testing
whether the associated struct mips_def_t sets the ISA flags in its
insn_flags field.

An example use of this is to allow boards which generate bootloader code
to determine the properties of the CPU that will be used, for example
whether the CPU is 64 bit or which architecture revision it implements.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21 22:24:58 +00:00
Jianjun Duan
2c21ee769e migration: extend VMStateInfo
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24 17:54:47 +00:00
Peter Maydell
598cf1c805 * QOM interface fix (Eduardo)
* RTC fixes (Gaohuai, Igor)
 * Memory leak fixes (Li Qiang, me)
 * Ctrl-a b regression (Marc-André)
 * Stubs cleanups and fixes (Leif, me)
 * hxtool tweak (me)
 * HAX support (Vincent)
 * QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me)
 * PC_COMPAT_2_8 fix (Marcelo)
 * stronger bitmap assertions (Peter)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQExBAABCAAbBQJYggc9FBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
 5pMH/092iVHw1la8VmphQd8W7hkCHckvVbwaEJ+n4BP8MjeUNmYFJX+op9Qlpqfe
 ekYqQgK69v2UwuofVK2gqS+Y2EyFHivTESk5pS3SM3lTewV1fzCM/HVG3pTxV/ol
 V+eBnp+shrfNG3Eg7YThTqx4LkDUp24Pd3HJVblQZMVpqGzL2xUuUQzSf8F/eeQJ
 xO61pm0ovpCY5MCg3kPLx8GIkPAmcXo5jhMCTz5aLnQW6TO/mwx271a4UE2RTLZ7
 cFjNhxdGSzlnn2RwId4HVYWGU42taW6mpa8NX1hVVUXa1A2qlAfi5N/WLaH0aGYR
 J5ZTIaXdPUBx2SrUmd8udj4a818=
 =H5BQ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* QOM interface fix (Eduardo)
* RTC fixes (Gaohuai, Igor)
* Memory leak fixes (Li Qiang, me)
* Ctrl-a b regression (Marc-André)
* Stubs cleanups and fixes (Leif, me)
* hxtool tweak (me)
* HAX support (Vincent)
* QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me)
* PC_COMPAT_2_8 fix (Marcelo)
* stronger bitmap assertions (Peter)

# gpg: Signature made Fri 20 Jan 2017 12:49:01 GMT
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (35 commits)
  pc.h: move x-mach-use-reliable-get-clock compat entry to PC_COMPAT_2_8
  bitmap: assert that start and nr are non negative
  Revert "win32: don't run subprocess tests on Mingw32 platform"
  hax: add Darwin support
  Plumb the HAXM-based hardware acceleration support
  target/i386: Add Intel HAX files
  kvm: move cpu synchronization code
  KVM: PPC: eliminate unnecessary duplicate constants
  ramblock-notifier: new
  char: fix ctrl-a b not working
  exec: Add missing rcu_read_unlock
  x86: ioapic: fix fail migration when irqchip=split
  x86: ioapic: dump version for "info ioapic"
  x86: ioapic: add traces for ioapic
  hxtool: emit Texinfo headings as @subsection
  qemu-thread: fix qemu_thread_set_name() race in qemu_thread_create()
  serial: fix memory leak in serial exit
  scsi-block: fix direction of BYTCHK test for VERIFY commands
  pc: fix crash in rtc_set_memory() if initial cpu is marked as hotplugged
  acpi: filter based on CONFIG_ACPI_X86 rather than TARGET
  ...

# Conflicts:
#	include/hw/i386/pc.h
2017-01-20 16:42:07 +00:00
Paolo Bonzini
d525ffabab stubs: remove stubs/kvm.c
This has a single function, just move it to the other target/*/kvm.c files.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Alex Bennée
d10eb08f5d cputlb: drop flush_global flag from tlb_flush
We have never has the concept of global TLB entries which would avoid
the flush so we never actually use this flag. Drop it and make clear
that tlb_flush is the sledge-hammer it has always been.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[DG: ppc portions]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-13 14:24:37 +00:00
Alex Bennée
1f5c00cfdb qom/cpu: move tlb_flush to cpu_common_reset
It is a common thing amongst the various cpu reset functions want to
flush the SoftMMU's TLB entries. This is done either by calling
tlb_flush directly or by way of a general memset of the CPU
structure (sometimes both).

This moves the tlb_flush call to the common reset function and
additionally ensures it is only done for the CONFIG_SOFTMMU case and
when tcg is enabled.

In some target cases we add an empty end_of_reset_fields structure to the
target vCPU structure so have a clear end point for any memset which
is resetting value in the structure before CPU_COMMON (where the TLB
structures are).

While this is a nice clean-up in general it is also a precursor for
changes coming to cputlb for MTTCG where the clearing of entries
can't be done arbitrarily across vCPUs. Currently the cpu_reset
function is usually called from the context of another vCPU as the
architectural power up sequence is run. By using the cputlb API
functions we can ensure the right behaviour in the future.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-13 14:24:31 +00:00
Richard Henderson
1a0196c5c7 target-mips: Use clz opcode
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:06:11 -08:00
Richard Henderson
6eebb7a438 target-mips: Use the new extract op
Use extract for EXT and DEXT.

Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:06:10 -08:00
Thomas Huth
fcf5ef2ab5 Move target-* CPU file into a target/ folder
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.

Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-12-20 21:52:12 +01:00