When taking an exception for an M profile core, we must clear
the IT bits. Since the IT bits are cached in env->condexec_bits
we must clear them there: writing the bits in env->uncached_cpsr
has no effect. (Reported as LP:944645.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a typo in handling of the ARM946 cp15 c5 c0 0 1 handling
(instruction access permission bits) that meant it would
return the data access permission bits by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
sed -i "s/CPUState/CPUARMState/g" target-arm/*.[hc]
sed -i "s/#define CPUARMState/#define CPUState/" target-arm/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Since target-arm has some CPUState fields for which we take the approach
of baking assumptions about them into translated code and then calling
tb_flush() when the fields change, we must also tb_flush on CPU reset,
because reset is a change of those fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
The correct FPSID for the Cortex-A9 (according to the TRM) is
0x41033090 for the r0p0 that we claim to model.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Add a definition of a Cortex-A15 CPU. Note that for the moment we do
not implement any of:
* Large Physical Address Extensions (LPAE)
* Virtualization Extensions
* Generic Timer
* TrustZone (this is also true of our existing Cortex-A9 model, etc)
This CPU model is sufficient to boot a Linux kernel which has been
compiled for an A15 without LPAE enabled.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a dummy implementation of the cp15 registers for the generic
timer (found in the Cortex-A15), just sufficient for Linux to
decide that it can't use it. This requires at least CNTP_CTL and
CNTFRQ to be implemented as RAZ/WI; we RAZ/WI all of c14.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Long term, the config_base_register will be a QDM parameter. In the
meantime, models that use it need to be able to preserve it across
cpu_reset() calls.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the helper routines for VCVT float-to-int conversions, add
an explicit cast rather than relying on the softfloat int32
type being exactly 32 bits wide (which it is not guaranteed to be).
Without this, if the softfloat type was 64 bits wide we would
get zero-extension of the 32 bit value from the ARM register
rather than sign-extension, since TCG i32 values are passed as
uint32_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix some bugs in the implementation of the TLB invalidate
operations on ARM:
* the 'invalidate all' op was not passing flush_global=1
to tlb_flush(); this doesn't have a practical effect since
tlb_flush() currently ignores that argument, but is
semantically incorrect
* 'invalidate by address for all ASIDs' was implemented as
flushing the whole TLB, which invalidates much more than
strictly necessary. Use tlb_flush_page() instead.
We also annotate the ops with the ARM ARM official acronyms.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix errors in the decode of M profile CPS:
* the decode of the I (affects PRIMASK) and F (affects FAULTMASK)
bits was reversed
* the FAULTMASK system register number is 19, not 17
This fixes an issue reported as LP:913925.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add dummy register support for the cp15, CRn=c15 registers.
config_base_register and power_control_register currently
default to 0, but may have improved support after the QOM
CPU patches are finished.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ignore attempts to set the CPSR mode field to an invalid value.
This is UNPREDICTABLE, but we should not cpu_abort() for things
a malicious guest (or a confused user on the gdbstub interface)
can provoke.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Avoid using cpu_single_env in bank_number() -- if we were
called via the gdb stub reading or writing the CPSR then
it is NULL and we will segfault if we take the cpu_abort().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Return the correct value in the domain field in the cp15 DFSR
(C5) -- bug noticed during Xvisor development.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
[Peter Maydell: reworded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clarify some slightly misleading comments in the Thumb decoder's
handling of the memory hint space -- in particular one code path
marked as 'UNPREDICTABLE or unallocated hint' also includes some
legitimate preload instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
env is allocated in cpu_arm_init() with g_malloc0(), so free with g_free().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the restoring of VFP registers on vmload.
Signed-off-by: Dmitry Koshelev <karaghiozis@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[peter.maydell: improved commit message a little]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the fused multiply-accumulate instructions (VFMA, VFMS,
VFNMA, VFNMS) which are new in VFPv4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for UDIV and SDIV in ARM mode. This is a new optional
feature for A profile cores (Thumb mode has had UDIV and SDIV for
M profile cores for some time).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the ARM_FEATURE_DIV feature bit to _THUMB_DIV, to
make room for a new feature switch enabling DIV in the ARM
encoding. (Cores may implement either (a) no divide insns
(b) divide insns in Thumb encodings only (c) divide insns
in both ARM and Thumb encodings.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up the decoding of the v6 media multiply space so that we UNDEF
on unassigned encodings rather than randomly interpreting them as
some instruction in this space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Indeed, the result is known to be always positive.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a bug in bccd9ec5f0,
target-arm/op_helper.c missed a change unlike all other targets.
This lead to a NULL pointer dereferences.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The command line option is called -kernel, not -kenrel.
Cc: Paul Brook <paul@codesourcery.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Parameter is_softmmu (and its evil mutant twin brother is_softmuu)
is not used in cpu_*_handle_mmu_fault() functions, remove them
and adjust callers.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move softmmu_exec.h include directives from target-*/exec.h to
target-*/op_helper.c. Move also various other stuff only used in
op_helper.c there.
Define global env in dyngen-exec.h.
For i386, move wrappers for segment and FPU helpers from user-exec.c
to op_helper.c. Implement raise_exception_err_env() to handle dynamic
CPUState. Move the function declarations to cpu.h since they can be
used outside of op_helper.c context.
LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and
env_to_regs().
ARM: make raise_exception() static.
Convert
#include "exec.h"
to
#include "cpu.h"
#include "dyngen-exec.h"
and remove now unused target-*/exec.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove some stray printfs for cases which don't generally happen
(some VFP UNDEF cases, reads and writes to unknown cp14 registers);
we should simply generate an UNDEF when the instruction is executed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
VCVTT/VCVTB with bit 8 set is UNPREDICTABLE; we choose to UNDEF.
This avoids a TCG assert later when the VCVTT/VCVTB code tries to
use a source register that wasn't ever set up.
We pull the check for the presence of the half-precision extension
up in to this common code as well.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle the UNDEF and UNPREDICTABLE cases for VLDM and VSTM. In
particular, we now generate an undef exception for overlarge imm8
values rather than generating 1000+ TCG ops and hitting an assertion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARMv6 implemented various operations as special cases of cp15 accesses
which are true instructions in v7; this includes barriers (DMB, DSB, ISB).
Catch this special case at translate time, so that it works in linux-user
mode (which doesn't provide a functional get_cp15 helper) as well as
system mode.
Includes minor cleanup of the existing cases (single switch statement,
and doing the "OK in user mode?" test explicitly rather than hiding it in
cp15_user_ok()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 1136r1 is actually a v6K core (unlike the 1136r0); mark it as such,
thus enabling the TLS registers, NOP hints, CLREX, half and byte wide
exclusive load/stores, etc.
The VA-to-PA translation registers are not present on 1136r1, so
introduce a new feature flag for them, which is enabled on 1176,
11MPCore and all v7 cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Add support for v6K ARM1176JZF-S. This core includes the VA<->PA
translation capability and security extensions.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VMSAv7 remapping and access permissions were introduced in ARMv6K
and not ARMv7.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Correct typos of "licenced" to "licensed".
Reviewed-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de>
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
target-arm: Fix BASEPRI, BASEPRI_MAX, and FAULTMASK access
target-arm: Minimal implementation of performance counters
Revert "Makefile.target: Allow target helpers to be in any *_helper.c file"
Revert "target-arm: Use global env in neon_helper.c helpers"
target-arm: Pass fp status pointer explicitly to neon fp helpers
target-arm: Make VFP binop helpers take pointer to fpstatus, not CPUState
target-arm: Add helper function to generate code to get fpstatus pointer
Revert "target-arm: Use global env in iwmmxt_helper.c helpers"
Conflicts:
Makefile.target
Parameter 'info' is const, so add the missing attribute.
v2:
Add 'const' to the local variable info in do_cpu_reset() and to
the boot_info field in CPUARMState (suggested by Peter Maydell).
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Move functions cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h. This is
needed by later patches.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Before the next patch, fix coding style of the areas affected.
Change the type of the return value from cpu_has_work() and
qemu_cpu_has_work() to bool.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Correct the decode of the register numbers for BASEPRI, BASEPRI_MAX
and FAULTMASK, according to "ARMv7-M Architecture Reference Manual"
issue D section "B5.2.3 MRS" and "B5.2.3 MSR".
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Newer Linux kernels assume the existence of the performance counter
cp15 registers. Provide a minimal implementation of these registers.
We support no events. This should be compliant with the ARM ARM,
except that we don't implement the cycle counter.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This effectively reverts commit 2a3f75b42a
so that we return to passing CPUState to helpers as an explicit parameter.
(There were a number of conflicts in target-arm/translate.c which had
to be resolved by hand so it is not a pure revert.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the Neon helpers for various floating point operations take an
explicit pointer to the float_status they use, so they don't rely on
the global environment pointer any more. This also allows us to drop
the mul/sub/add helpers completely and just use the vfp versions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the VFP binop helper functions take a pointer to the fp status, not
the entire CPUState. This will allow us to use them for Neon operations too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add and use a helper function which returns a TCGv which is a pointer
to the fp_status for either Neon or VFP operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the correct _ptr aliases for manipulating the pointer to
the fp_status; this fixes a compilation failure on 64 bit hosts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove a preprocessor #define which is never used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If the input to a Neon float comparison is a quiet NaN, the ARM ARM
specifies that we should raise InvalidOp if the comparison is GE or GT
but not for EQ. (Signaling NaNs raise InvalidOp regardless). This means
only EQ should use the _quiet version of the comparison function.
We implement this by cleaning up the comparison helpers to call the
appopriate versions of the softfloat simple comparison functions
(float32_le and friends) rather than the generic float32_compare functions.
This makes them simple enough that they are clearer opencoded rather
than macroised.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The Neon versions of int-float conversions must use the "standard FPSCR"
rather than the default FPSCR. Implement this by having the helper
functions take a pointer to the appropriate float_status value rather
than simply taking a pointer to the entire CPUState, and making
translate.c pass a pointer to vfp.fp_status or vfp.standard_fp_status
appropriately for whether the instruction being translated is Neon
or VFP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On ARM the architecture mandates that when an output denormal is flushed to
zero we must set the FPSCR UFC (underflow) bit, so map softfloat's
float_flag_output_denormal accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The helpers for VRECPE.F32, VSQRTE.F32, VRECPS and VRSQRTS handle denormals
as special cases, so we must set the InputDenormal exception flag ourselves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The functions which do the core estimation algorithms for the VRSQRTE
and VRECPE instructions should not set floating point exception flags,
so use a local fp status for doing these calculations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct handling of NaNs for VFP VMLA, VMLS, VNMLS and VNMLA requires that
we implement the set of negations and additions specified by the ARM ARM;
plausible looking simplifications like turning (-A + B) into (B - A) or
computing (A + B) rather than (B + A) result in selecting the wrong NaN or
returning a NaN with the wrong sign bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The code changed here is an unused data type name (evt_flush_occurred).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Make sure the base register isn't updated if it is in the load list
for a Thumb LDM (T1 encoding) which aborts partway through the load.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-arm: fix LDMIA bug on page boundary
When consecutive memory locations are on page boundary, a base register may be
loaded before page fault occurs. After page fault handling, it losts the memory
location information. To solve this problem, loading a base register has to put back.
Signed-off-by: Yuyeon Oh <yuyeon.oh@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correctly UNDEF for Neon VLD/VST "multiple structures" forms where the
align field is not valid.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Handle the UNDEF and UNPREDICTABLE cases for Neon "single element to
one lane" VLD and "single element from one lane" VST.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When we catch the special case of an input NaN in ARM float to int
helper functions, set the Invalid flag as well as returning the
correct result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Basic implementation of DEC/Intel SA-1100/SA-1110 chips emulation.
Implemented:
- IRQs
- GPIO
- PPC
- RTC
- UARTs (no IrDA/etc.)
- OST reused from pxa25x
Everything else is TODO (esp. PM/idle/sleep!) - see the todo in the
hw/strongarm.c
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The previous patch removed the need for parameter puc.
Is is now unused, so remove it.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Function gen_pc_load was introduced in commit
d2856f1ad4.
The only reason for parameter searched_pc was
a debug statement in target-i386/translate.c.
Parameter puc was needed by target-sparc until
commit d7da2a1040.
Remove searched_pc from the debug statement and remove both
parameters from the parameter list of gen_pc_load.
As the function name gen_pc_load was also misleading,
it is now called restore_state_to_opc. This new name
was suggested by Peter Maydell, thanks.
v2: Remove last parameter, too, and rename the function.
v3: Fix [] typo in target-arm/translate.c.
Fix wrong SHA1 object name in commit message (copy+paste error).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
This provides a consistent naming scheme across all targets.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
helpfull -> helpful
usefull -> useful
cotrol -> control
and a grammar fix.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
In the VABAL instruction we take the absolute difference of two
values of size x and store it in a result of size 2x. This means
we have to be careful to calculate the absolute difference using
a wide enough type that we don't accidentally overflow.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The ARM architecture mandates that we detect tininess before rounding,
so set the softfloat fp_status up appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Catch the UNPREDICTABLE case for Neon VTBL,VTBX, and UNDEF it
rather than allowing the helper function to index off the end
of the register file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Many of the Neon "2 register misc" instruction forms require invalid
size fields to cause the instruction to UNDEF. Pull this information
out into an array; this simplifies the code and also means we can do
the check early and avoid the problem of leaking TCG temporaries in
the illegal_op case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add missing checks for cases which must UNDEF in the Neon "2 registers and
a scalar" data processing instruction space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add missing UNDEF checks for instructions in the Neon "3 registers of
different widths" data processing space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For Neon "one register and a modified immediate value" forms, the
combination op=1 cmode=1111 is unallocated and should UNDEF.
All instructions of this form also UNDEF if Q == 1 and Vd<0> == 1.
We also add a comment on the only UNPREDICTABLE in this space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Collapse some switch cases for VSRI into those for VSHL, VSLI,
since the bodies are the same. (This is not completely obvious
for the size < 3 case, but since for VSRI we know U=1 the
GEN_NEON_INTEGER_OP() expansion is equivalent to the open-coded
VSHL/VSLI case.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correctly handle all the UNDEF cases for Neon instructions of the
"2 registers and shift" form, and make sure that we check for these
cases early enough not to leak TCG temporaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since we know that the case of (pairwise && q) has been caught
earlier, we can simplify the register setup code for each pass
in the three-register-same-size Neon loop.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the handling of UNDEF cases for the NEON "3 registers same
size" forms, by adding missing checks and rationalising some others
so they are done early enough to avoid leaking TCG temporaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Simplify the checks for invalid size values for the Neon "three registers
of the same size" instruction forms (and add them where they were missing)
by using a lookup table.
This includes adding symbolic constants for the op values in this space,
since we now use them in multiple places.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Currently target-arm/ assumes at least ARMv5 core. Add support for
handling also ARMv4/ARMv4T. This changes the following instructions:
BX(v4T and later)
BKPT, BLX, CDP2, CLZ, LDC2, LDRD, MCRR, MCRR2, MRRC, MCRR, MRC2, MRRC,
MRRC2, PLD QADD, QDADD, QDSUB, QSUB, STRD, SMLAxy, SMLALxy, SMLAWxy,
SMULxy, SMULWxy, STC2 (v5 and later)
All instructions that are "v5TE and later" are also bound to just v5, as
that's how it was before.
This patch doesn _not_ include disabling of cp15 access and base-updated
data abort model (that will be required to emulate chips based on a
ARM7TDMI), because:
* no ARM7TDMI chips are currently emulated (or planned)
* those features aren't strictly necessary for my purposes (SA-1 core
emulation).
All v5 models are handled as they are v5T. Internally we still have a
check if the model is a v5(T) or v5TE, but as all emulated cores are
v5TE, those two cases are simply aliased (for now).
Patch is heavily based on patch by Filip Navara <filip.navara@gmail.com>
which in turn is based on work by Ulrich Hecht <uli@suse.de> and Vincent
Sanders <vince@kyllikki.org>.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long (suggested by Blue Swirl).
These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Make the Neon helper routines use the correct FP status from
the CPUEnv rather than using a dummy static one. This means
they will correctly handle denormals and NaNs and will set
FPSCR exception bits properly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the global 'env' variable in the helper functions in iwmmxt_helper.c.
This means we don't need to pass env as an argument to them any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the global 'env' variable in the helper functions in neon_helper.c.
This means we don't need to pass env as an argument to them any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the argument and return types for the float<->int conversion helper
functions so that integer arguments and return values are declared as
uint32_t/uint64_t, not float32/float64. This allows us to remove the
hand-rolled functions which were doing bitwise copies between the types
via unions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the new softfloat min/max functions to implement the Neon VMAX
and VMIN instructions. This allows us to get the right behaviour
for NaN and negative zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement ABD by taking the absolute value of the difference
of the operands (as the ARM ARM specifies) rather than by
flipping the order of the operands to the subtract based
on the results of a comparison. The latter approch gives
the wrong answers for some edge cases like negative zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implementing the floating-point versions of VCLE #0 and VCLT #0 by
doing a GT comparison and inverting the result gives the wrong
result if the input is a NaN. Implement as a GT comparison with the
operands swapped instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the helper functions implementing the Neon floating point comparison
ops (VCGE, VCGT, VCEQ, VACGT, VACGE) to return the right answer when
one of the values being compared is a NaN.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the softfloat make_float32 and float32_val macros to convert between
softfloat's float32 type and raw uint32_t types, rather than private
conversion functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move the allocation and freeing of the TCG temp used for the address for
Neon load/store instructions so that we don't allocate the temporary
until we've done enough decoding to know that the instruction is not
an UNDEF pattern; this avoids leaking the TCG temp in these cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix several bugs in VLD of single element to all lanes:
The "single element to all lanes" form of VLD1 differs from those for
VLD2, VLD3 and VLD4 in that bit 5 indicates whether the loaded element
should be written to one or two Dregs (rather than being a register
stride). Handle this by special-casing VLD1 rather than trying to
have one loop which deals with both VLD1 and 2/3/4.
Handle VLD4.32 with 16 byte alignment specified, rather than UNDEFfing.
UNDEF for the invalid size and alignment combinations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The preferred way to create a constant floating point value is to use
make_float32() rather than doing a runtime int32_to_float32().
Convert the code in the VRSQRTS helper to work this way.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the handling of edge cases for the VRECPS instruction:
* this is a Neon instruction so uses the "standard FPSCR value"
* (zero, inf) is a special case which returns 2.0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
SMUAD and SMLAD are supposed to set the Q bit if the addition of
the two 16x16 multiply products and optional accumulator overflows
considered as a signed value. However we were only doing this check
for the addition of the accumulator, not when adding the products,
with the effect that we were mishandling the edge case where
both inputs are 0x80008000.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the signed modulo arithmetic helpers for the v6media
instructions (SADD8, SSUB8, SADD16, SSUB16, SASX, SSAX) to set
the GE bits correctly (based on the result of the add or subtract
before it is truncated to 16 bits, not after).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Decode of Thumb load/store was merging together the cases of 'bit 11==0'
(reg+reg LSL imm) and 'bit 11==1' (reg+imm). This happens to work for
valid instruction patterns but meant that we would not UNDEF for the
cases the architecture mandates that we must. Make the decode actually
look at bit 11 as well as [10..8] so that we UNDEF in the right places.
This change also removes what was a spurious unreachable 'case 8',
and correctly frees TCG temporaries on the illegal-insn codepaths.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
All implementations are now the same, and there is only one caller,
so inline the function there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Newer ARM kernels try to probe for whether the CPU has hardware breakpoint
support. For this to work QEMU has to implement a minimal set of the cp14
debug registers. The architecture requires v7 cores to implement debug
and so there is no defined way to report its absence; however in practice
returning a zero DBGDIDR (ie with a reserved value for "debug architecture
version") should cause well-written hw debug users to do the right thing.
We also implement DBGDRAR and DBGDSAR as RAZ, indicating no memory mapped
debug components.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the new TCG temporary leak debugging facilities to
check that each ARM instruction does not leak temporaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This commit removes the ad-hoc resource leak checking code from
target-arm. This includes replacing all uses of new_tmp() with
tcg_temp_new_i32() and all uses of dead_tmp() with
tcg_temp_free_i32().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement VA->PA translations by cp15-c7 that went through unchanged
previously.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The code for Thumb2 ORNS (or negated and set flags) was trashing
a TCG input register which was needed later for use in calculating
flags, with the effect that the carry flag was always set with
the wrong sense. Fix this by using the TCG orc op instead of
separate not and or ops.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix two bugs in the translation of the instructions VMOV sa,sb,rx,ry and
VMOV rx,ry,sa,sb (which copy between a pair of ARM core registers and a
pair of VFP single precision registers):
* An incorrect condition meant these instruction patterns were being
treated as load/store multiple, which resulted in the generation
of bad code and a runtime segfault
* The order of the core register pair was reversed so the values would
go to the wrong registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In v7 of the ARM architecture, WFI (wait for interrupt) is a first-class
instruction, but in previous versions this functionality was provided
via a cp15 coprocessor register. Add correct feature checks to the
decoding of the cp15 WFI instructions so that they behave correctly
for newer cores. In particular, the old 0,c7,c8,2 encoding used on
ARM940 has been reused for VA-to-PA translation in v6 and v7.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now use the same algorithm as described in the ARM ARM.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now use the same algorithm as described in the ARM ARM.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These two constants will be used by helper functions such as recpe_f32
and rsqrte_f32.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For Neon shifts by immediate and narrow, correctly handle the case
where the source registers and the destination registers overlap
(the second pass should use the original register contents, not the
results of the first pass).
This includes a refactoring to pull the size check outside the
loop rather than inside, since there is now very little common
code between the size == 3 and size != 3 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Pull the code which decodes narrowing operations as being either
signed/unsigned saturate or plain out into its own function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correctly handle VQRSHL of unsigned values by a shift count of the
width of the data type or larger, which must be special-cased in the
qrshl_u* helper functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Handle the case of signed VQRSHL by a shift count of the width of the
data type or larger, which must be special cased in the qrshl_s*
helper functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Call the normal shift helpers instead of the rounding ones.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix value returned by signed 8 and 16 bit qrshl helpers
when the result has saturated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix range of shift amounts which always give 0 as result.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix handling of unsigned VRSHL.s8 and .s16 right shifts by the type
width.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correctly handle VRSHL of signed values by a shift count of the
width of the data type or larger, which must be special-cased in the
rshl_s* helper functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Handle cases where adding the rounding constant could overflow in Neon
shift instructions: VRSHR, VRSRA, VQRSHRN, VQRSHRUN, VRSHRN.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
[peter.maydell@linaro.org: fix handling of large shifts in rshl_s32,
calculate signed saturated value as other functions do.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move the implementation of the Neon VUZP unzip instruction from inline
code to helper functions. (At 50+ TCG ops it was well over the
recommended limit for coding inline.) The helper implementations also
give the correct answers where the inline implementation did not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move the implementation of the Neon VUZP unzip instruction from inline
code to helper functions. (At 50+ TCG ops it was well over the
recommended limit for coding inline.) The helper implementations also
fix the handling of the quadword version of the instruction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We handle Thumb Neon data processing instructions by converting them
into the equivalent ARM encoding, as the two are very close. However
the ARM encoding should have bit 28 set, not clear. This wasn't causing
any problems because we don't actually look at that bit during decode;
however it is better to do the conversion correctly to avoid problems
later if we add checks to UNDEF on SBZ/SBO bits.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For VQDMLSL, negation has to occur after saturation, not before.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Refactor the handling of VQDMULL so that it is dealt with in
its own if() case rather than together with the accumulating
instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement VMULL.P8 (the 32x32->64 version of the polynomial multiply
instruction).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These two fields were added as a part of ARMv7 support patch (back in
2007), were never used by any code, so can be dropped.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Remove a stray #include <stdio.h> from the middle of neon_helper.c:
it was harmless but pointless since we include stdio.h at the top
of the file anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The Neon half-precision conversion operations (VCVT.F16.F32 and
VCVT.F32.F16) use ARM standard floating-point arithmetic, unlike
the VFP versions (VCVTB and VCVTT).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Silence the NaNs that may result from half-precision conversion,
as we do for the other conversions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a float16 type to softfloat, rather than using bits16 directly.
Also add the missing functions float16_is_quiet_nan(),
float16_is_signaling_nan() and float16_maybe_silence_nan(),
which are needed for the float16 conversion routines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix bit mask used when widening the result of shift on narrow input.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The returned value when doing saturating signed 64->32 bit
conversion of a negative number was incorrect due to a missing cast.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
VQMOVUN does a signed-to-unsigned saturating conversion. This is
different from both the signed-to-signed and unsigned-to-unsigned
conversions already implemented, so we need a new set of helper
functions (neon_unarrow_sat*).
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Refine the decoding of the Thumb preload and hint space, so we
UNDEF on the patterns that are supposed to UNDEF rather than NOP.
We also move the tests for this space earlier, so we don't emit
harmless but unnecessary address generation code for preload
hints (which by their nature are likely to be in hot code paths).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the decoding of the ARM preload and memory hint space,
by adding decoding of PLI, PLDW and the v7MP unallocated hint
space. This commit also corrects a slightly overexuberant
decoding of PLD(register) which was not checking that bit 4
was one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The ARM cp15 register 0,c0,c0,5 is standardised in the v7 architecture
as the MPIDR. Clean up its implementation to remove A9 specific handling.
This commit includes fixing an error in the value returned for the
MPIDR on A9, where we were erroneously claiming a cluster ID of 9.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a CPU feature flag for v7MP (the multiprocessing extensions); some
instructions exist only for v7MP and not for the base v7 architecture.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch fixes the errors reported by my tests in VSRA.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct an error in the implementation of the 16 bit
forms of VQ(R)DMULH, bringing them into line with the
32 bit implementation.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the register and part of register we get the scalar from in
the various "multiply vector by scalar" ops (VMUL by scalar
and friends).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch fixes corner-case saturations, when the target range is
zero. It merely removes the guard against (sh == 0), and makes:
__ssat(0x87654321, 1) return 0xffffffff and set the saturation flag
__usat(0x87654321, 0) return 0 and set the saturation flag
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add support for logging the start of instructions in TCG
code debug dumps for ARM targets.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
We were not correctly restoring the IT bits when resuming execution
after taking an unexpected exception in the middle of an IT block.
Fix this by tracking them along with PC changes and restoring in
gen_pc_load().
This fixes bug https://bugs.launchpad.net/qemu/+bug/581335
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Create a new function which does the common sequence of gen_set_condexec,
gen_set_pc_im, gen_exception, set is_jmp to DISAS_JUMP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove a redundant call to gen_set_condexec() in the translation of Thumb
mode SWI. (SWI and WFI generate "exceptions" which happen after the
execution of the instruction, ie when PC and IT bits have updated.
So the condexec bits at this point are not correct. However, the code
that handles finishing the translation of the TB will write the correct
value of the condexec bits later, so the only effect was that a conditional
Thumb SWI would generate slightly worse code than necessary.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When translating, get the user/priv state from the TB flags, not
the CPUState.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
M profile ARM cores don't have a CPSR mode field. Set the bit in the
TB flags that indicates non-user mode correctly for these cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When translating, the condexec bits for the TB are in the TB flags;
the CPUState condexec bits may be different.
This patch fixes https://bugs.launchpad.net/bugs/604872 where we might
segfault if we took an exception in the middle of a TB with an IT
block, because when we came to retranslate in cpu_restore_state()
the CPUState condexec bits would have advanced compared to the start
of the TB and we would generate different (wrong) code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The Thumb/ARM state for the TB being translated should come from
the TB flags, not the CPUState.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When translating, the VFP vector length and stride for this TB are encoded
in the TB flags; the CPUState copies may be different and must not be used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When translating code, whether the VFP unit is enabled for this TB
is stored in a bit in the TB flags. Use this rather than incorrectly
reading the FPEXC from the CPUState passed to translation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add symbolic constants for the bitfields we use in the TB flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When translating the SRS instruction, handle the "store registers
to stack of current mode" case in the helper function rather than
inline. This means the generated code does not make assumptions
about the current CPU mode which might not be valid when the TB
is executed later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
VSQRTS always uses the standard FPSCR value as it is a Neon instruction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add support to the ARM helper routines for a second fp_status value
which should be used for operations which the ARM ARM indicates use
"ARM standard floating-point arithmetic" rather than being controlled
by the rounding/flush/NaN settings in the FPSCR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The implementation of the ARM VRSQRTS instruction (which calculates
(3 - op1 * op2) / 2) was missing the division operation. It also
did not handle the special cases of (0,inf) and (inf,0).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix errors in the decoding of ARM VQSHL/VQSHLU immediate forms,
including using the new VQSHLU helper functions where appropriate.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add neon helper functions to implement VQSHLU, which is a
signed-to-unsigned version of VQSHL available only as an
immediate form.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Wire up the new softfloat support for flushing input denormals
to zero on ARM. The FPSCR FZ bit enables flush-to-zero for
both inputs and outputs, but the reporting of when inputs are
flushed to zero is via a separate IDC bit rather than the UFC
(underflow) bit used when output denormals are flushed to zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When handling a write to the ARM FPSCR, set the softfloat cumulative
exception flags from the cumulative flags in the FPSCR, not the
exception-enable bits. Also don't apply a mask: vfp_exceptbits_to_host
will only look at the correct bits anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
SMMLA and SMMLS are broken on both in normal and thumb mode, that is
both (different) implementations are wrong. They try to avoid a 64-bit
add for the rounding, which is not trivial if you want to support both
SMMLA and SMMLS with the same code.
The code below uses the same implementation for both modes, using the
code from the ARM manual. It also fixes the thumb decoding that was a
mix between normal and thumb mode.
This fixes the issues reported in
https://bugs.launchpad.net/qemu/+bug/629298
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
UMAAL should use unsigned multiply instead of signed.
This patch fixes this issue by handling UMAAL separately from
UMULL/UMLAL/SMULL/SMLAL as these instructions are different
enough. It also explicitly list instructions in case and catch
nonexistent instruction as illegal. Also fixes a few style issues.
This fixes the issues reported in
https://bugs.launchpad.net/qemu/+bug/696015
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Where VQSHL of a signed 8/16/32 bit value saturated, the result
value was not being calculated correctly (it should be either
the minimum or maximum value for the size of the signed type).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove a pointless else clause in the neon_qshl_u64 helper.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
VQSHL of a signed 64 bit non-zero value by a shift count >= 64 should
saturate; return the correct value in this case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a missing '-' which meant that we were misinterpreting the shift
argument for VQSHL of 64 bit signed values and treating almost every
shift value as if it were an extremely large right shift.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the arguments passed when generating neon qshl_{u,s}64()
helpers so that we use the correct registers.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The translation of REVSH shifted the low byte 8 steps left before performing
an 8-bit sign extend, causing this part of the expression to alwas be 0.
Reported-by: Johan Bengtsson <teofrastius@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the softfloat conversion routines for conversion to 16 bit
integers, because just casting to a 16 bit type truncates the
value rather than saturating it at 16-bit MAXINT/MININT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
VCVT of 16 bit fixed point to float should ignore the top 16 bits
of the source register. Cast to int16_t and friends rather than
int16 -- the former is guaranteed exactly 16 bits wide where the
latter is merely at least 16 bits wide (and so is usually 32 bits).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
The ARM ARM defines that if the input to a single<->double conversion
is a NaN then the output is always forced to be a quiet NaN by setting
the most significant bit of the fraction part.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
The ARM architecture mandates that converting a NaN value to
integer gives zero (if Invalid Operation FP exceptions are
not being trapped). This isn't the behaviour of the SoftFloat
library, so NaNs must be special-cased.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Fix errors in the decoding of the Neon forms of fixed-point VCVT:
* fixed-point VCVT is op 14 and 15, not 15 and 16
* the fbits immediate field was being misinterpreted
* the sense of the to_fixed bit was inverted
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Correct the decoding of source and destination registers
for the VFP forms of the VCVT instructions which convert
between floating point and integer or fixed-point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Correct ldrexd and strexd code to always read and write the
high word of the 64-bit value from addr+4.
Also make ldrexd and strexd agree that for a 64 bit value the
address in env->exclusive_addr is that of the low word.
This fixes the issues reported in
https://bugs.launchpad.net/qemu/+bug/670883
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Refine check on bkpt so that smc and undefined instruction encodings are
handled as an undefined instruction and trap.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
The thumb2 decoder contained a mixup between the bit controlling
doubling and the bit controlling if the operation was an add or a sub.
Signed-off-by: Johan Bengtsson <teofrastius@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
The PKHxx instructions were not recognized by the thumb2 decoder. The
solution provided in this changeset is identical to the arm-mode
implementation.
Signed-off-by: Johan Bengtsson <teofrastius@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Expose the vfp_get_fpscr() and vfp_set_fpscr() functions to C
code as well as generated code, so we can use them to read and
write the FPSCR when saving and restoring VFP registers across
signal handlers in linux-user mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
In linux-user mode, the XScale/iWMMXT coprocessors must be enabled
at reset so that we can run code that uses these instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
fprintf_function uses format checking with GCC_FMT_ATTR.
Format errors were fixed in
* target-i386/helper.c
* target-mips/translate.c
* target-ppc/translate.c
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When combining multiple values as part of a NEON array load, do explcit
shift/or rather than using gen_bfi. This voids redundant mask
operations.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Booting an arm kernel has been broken a while when booting from non zero start
address. This is due to the order of events: board init loads the kernel and
sets register 15 to the start address and then qemu_system_reset reset the cpu
making register 15 zero again.
This patch fixes the usage of the register 15 start address trick in
combination with arm_load_kernel.
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This prevent coprocessor IO structure from being reset on cpu reset. This was
a problem for PXA which uses coprocessor 6 and 14.
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch fixes few resource leaks in the iwmmxt disassemble.
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move ARMv7-M PC/SP initialization to the CPU reset routine. Add a board
reset routine to call this. Also load values directly from ROM as
images have not been copied yet.
Avoid clearing the NVIC pointer on cpu reset.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Don't set PAGE_EXEC for XN pages, to avoid a bypass of XN protection
checking if the page is already in the TLB.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Do not try to insert a conditional jump over next instruction when the
condition code is AL as this will trigger an internal error.
Signed-off-by: Johan Bengtsson <teofrastius@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
QEMU uses a fixed page size for the CPU TLB. If the guest uses large
pages then we effectively split these into multiple smaller pages, and
populate the corresponding TLB entries on demand.
When the guest invalidates the TLB by virtual address we must invalidate
all entries covered by the large page. However the address used to
invalidate the entry may not be present in the QEMU TLB, so we do not
know which regions to clear.
Implementing a full vaiable size TLB is hard and slow, so just keep a
simple address/mask pair to record which addresses may have been mapped by
large pages. If the guest invalidates this region then flush the
whole TLB.
Signed-off-by: Paul Brook <paul@codesourcery.com>
The rfe instruction can be used with any register, not just sp. Adjust the
condition check accordingly.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Removes a set of ifdefs from exec.c.
Introduce TARGET_VIRT_ADDR_SPACE_BITS for all targets other
than Alpha. This will be used for page_find_alloc, which is
supposed to be using virtual addresses in the first place.
Signed-off-by: Richard Henderson <rth@twiddle.net>
There's a return missing in the srs handling which leads to srs always being
treated an an invalid op.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
implementation only widened the 32bit source vector elements into a
64bit destination vector but forgot to perform the actual shifting
operation.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The rounding/truncating options were inverted. truncating
was done when rounding was meant and vice verse.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Support the "subs pc, lr" Thumb-2 exception return instruction.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Paul Brook <paul@codesourcery.com>
The Thumb CPS currently does not work correctly: CPSID touches more bits
than the instruction wants to, and CPSIE does nothing. Fix it by
passing the correct mask (the "affect" bits) and value.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Access the cp15.c13 TLS registers directly with TCG ops instead of with
a slow helper. If the the cp15 read/write was not TLS register access,
fall back to the cp15 helper.
This makes accessing __thread variables in linux-user when apps are compiled
with -mtp=cp15 possible. legal cp15 register to acces from linux-user are
already checked in cp15_user_ok.
While at it, make the cp15.c13 Thread ID registers available only on
ARMv6K and newer.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Current code is broken at least on recent compilers, comparison
between signed and unsigned types yield incorrect code and render
the neon shift helper functions defunct. This is the third revision
of this patch, casting all comparisons with the sizeof operator to
signed ssize_t type to force comparisons to be between signed integral
types.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Shift by immediate value is incorrectly overwritten by a temporary
variable in the processing of NEON vsri, vshl and vsli instructions.
This patch has been revised to also include a fix for the special
case where the code would previously try to shift an integer value
over 31 bits left/right.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
