Some versions of Windows hang on reboot if their TSC value is greater
than 2^54. The calibration of the Hyper-V reference time overflows
and fails; as a result the processors' clock sources are out of sync.
The issue is that the TSC _should_ be reset to 0 on CPU reset and
QEMU tries to do that. However, KVM special cases writing 0 to the
TSC and thinks that QEMU is trying to hot-plug a CPU, which is
correct the first time through but not later. Thwart this valiant
effort and reset the TSC to 1 instead, but only if the CPU has been
run once.
For this to work, env->tsc has to be moved to the part of CPUArchState
that is not zeroed at the beginning of x86_cpu_reset.
Reported-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Supersedes: <20220324082346.72180-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
High bits in the immediate operand of SSE comparisons are ignored, they
do not result in an undefined opcode exception. This is mentioned
explicitly in the Intel documentation.
Reported-by: sonicadvance1@gmail.com
Closes: https://gitlab.com/qemu-project/qemu/-/issues/184
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some AMD processors expose the PKRU extended save state even if they do not have
the related PKU feature in CPUID. Worse, when they do they report a size of
64, whereas the expected size of the PKRU extended save state is 8, therefore
the esa->size == eax assertion does not hold.
The state is already ignored by KVM_GET_SUPPORTED_CPUID because it
was not enabled in the host XCR0. However, QEMU kvm_cpu_xsave_init()
runs before QEMU invokes arch_prctl() to enable dynamically-enabled
save states such as XTILEDATA, and KVM_GET_SUPPORTED_CPUID hides save
states that have yet to be enabled. Therefore, kvm_cpu_xsave_init()
needs to consult the host CPUID instead of KVM_GET_SUPPORTED_CPUID,
and dies with an assertion failure.
When setting up the ExtSaveArea array to match the host, ignore features that
KVM does not report as supported. This will cause QEMU to skip the incorrect
CPUID leaf instead of tripping the assertion.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/916
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Analyzed-by: Yang Zhong <yang.zhong@intel.com>
Reported-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the physical machine environment, when a SRAR error occurs,
the IA32_MCG_STATUS RIPV bit is set, but qemu does not set this
bit. When qemu injects an SRAR error into virtual machine, the
virtual machine kernel just call do_machine_check() to kill the
current task, but not call memory_failure() to isolate the faulty
page, which will cause the faulty page to be allocated and used
repeatedly. If used by the virtual machine kernel, it will cause
the virtual machine to crash
Signed-off-by: luofei <luofei@unicloud.com>
Message-Id: <20220120084634.131450-1-luofei@unicloud.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix vCPU hot-unplug related leak reported by Valgrind:
==132362== 4,096 bytes in 1 blocks are definitely lost in loss record 8,440 of 8,549
==132362== at 0x4C3B15F: memalign (vg_replace_malloc.c:1265)
==132362== by 0x4C3B288: posix_memalign (vg_replace_malloc.c:1429)
==132362== by 0xB41195: qemu_try_memalign (memalign.c:53)
==132362== by 0xB41204: qemu_memalign (memalign.c:73)
==132362== by 0x7131CB: kvm_init_xsave (kvm.c:1601)
==132362== by 0x7148ED: kvm_arch_init_vcpu (kvm.c:2031)
==132362== by 0x91D224: kvm_init_vcpu (kvm-all.c:516)
==132362== by 0x9242C9: kvm_vcpu_thread_fn (kvm-accel-ops.c:40)
==132362== by 0xB2EB26: qemu_thread_start (qemu-thread-posix.c:556)
==132362== by 0x7EB2159: start_thread (in /usr/lib64/libpthread-2.28.so)
==132362== by 0x9D45DD2: clone (in /usr/lib64/libc-2.28.so)
Reported-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Mark Kanda <mark.kanda@oracle.com>
Message-Id: <20220322120522.26200-1-philippe.mathieu.daude@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The instruction description says "It is loaded without rounding
errors." which implies we should have the widest rounding mode
possible.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/888
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220315121251.2280317-4-alex.bennee@linaro.org>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Power ISA v3.1 formalizes the previously undefined result in
words 1 and 3 to be a copy of the result in words 0 and 2.
This affects: xvcvsxdsp, xvcvuxdsp, xvcvdpsp.
And the previously undefined result in word 1 to be a copy of
the result in word 0.
This affects: xscvdpsp.
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Message-Id: <20220316200427.3410437-1-lucas.coutinho@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Power ISA v3.1 formalizes the previously undefined result in
words 1 and 3 to be a copy of the result in words 0 and 2.
This affects: xscvdpsxws, xscvdpuxws, xvcvdpsxws, xvcvdpuxws.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/852
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[ clg: checkpatch fixes ]
Message-Id: <20220315053934.377519-1-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
KVM support for AMX includes a new system attribute, KVM_X86_XCOMP_GUEST_SUPP.
Commit 19db68ca68 ("x86: Grant AMX permission for guest", 2022-03-15) however
did not fully consider the behavior on older kernels. First, it warns
too aggressively. Second, it invokes the KVM_GET_DEVICE_ATTR ioctl
unconditionally and then uses the "bitmask" variable, which remains
uninitialized if the ioctl fails. Third, kvm_ioctl returns -errno rather
than -1 on errors.
While at it, explain why the ioctl is needed and KVM_GET_SUPPORTED_CPUID
is not enough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make the rvbar property settable after realize. This is done
in preparation to model the ZynqMP's runtime configurable rvbar.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220316164645.2303510-3-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For M-profile, the fault address is not always exposed to the guest
in a fault register (for instance the BFAR bus fault address register
is only updated for bus faults on data accesses, not instruction
accesses). Currently we log the address only if we're putting it
into a particular guest-visible register. Since we always have it,
log it generically, to make logs of i-side faults a bit clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220315204306.2797684-3-peter.maydell@linaro.org
Currently the CPU_LOG_INT logging misses some useful information
about loads from the vector table. Add logging where we load vector
table entries. This is particularly helpful for cases where the user
has accidentally not put a vector table in their image at all, which
can result in confusing guest crashes at startup.
Here's an example of the new logging for a case where
the vector table contains garbage:
Loaded reset SP 0x0 PC 0x0 from vector table
Loaded reset SP 0xd008f8df PC 0xf000bf00 from vector table
Taking exception 3 [Prefetch Abort] on CPU 0
...with CFSR.IACCVIOL
...BusFault with BFSR.STKERR
...taking pending nonsecure exception 3
...loading from element 3 of non-secure vector table at 0xc
...loaded new PC 0x20000558
----------------
IN:
0x20000558: 08000079 stmdaeq r0, {r0, r3, r4, r5, r6}
(The double reset logging is the result of our long-standing
"CPUs all get reset twice" weirdness; it looks a bit ugly
but it'll go away if we ever fix that :-))
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220315204306.2797684-2-peter.maydell@linaro.org
LPAE descriptors come in three forms:
* table descriptors, giving the address of the next level page table
* page descriptors, which occur only at level 3 and describe the
mapping of one page (which might be 4K, 16K or 64K)
* block descriptors, which occur at higher page table levels, and
describe the mapping of huge pages
QEMU's page-table-walk code treats block and page entries
identically, simply ORing in a number of bits from the input virtual
address that depends on the level of the page table that we stopped
at; we depend on the previous masking of descaddr with descaddrmask
to have already cleared out the low bits of the descriptor word.
This is not quite right: the address field in a block descriptor is
smaller, and so there are bits which are valid address bits in a page
descriptor or a table descriptor but which are not supposed to be
part of the address in a block descriptor, and descaddrmask does not
clear them. We previously mostly got away with this because those
descriptor bits are RES0; however with FEAT_BBM (part of Armv8.4)
block descriptor bit 16 is defined to be the nT bit. No emulated
QEMU CPU has FEAT_BBM yet, but if the host CPU has it then we might
see it when using KVM or hvf.
Explicitly zero out all the descaddr bits we're about to OR vaddr
bits into.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/790
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220304165628.2345765-1-peter.maydell@linaro.org
When arm_is_el2_enabled was introduced, we missed
updating pauth_check_trap.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/788
Fixes: e6ef016926 ("target/arm: use arm_is_el2_enabled() where applicable")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220315021205.342768-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For both ldnt1 and stnt1, the meaning of the Rn and Rm are different
from ld1 and st1: the vector and integer registers are reversed, and
the integer register 31 refers to XZR instead of SP.
Secondly, the 64-bit version of ldnt1 was being interpreted as
32-bit unpacked unscaled offset instead of 64-bit unscaled offset,
which discarded the upper 32 bits of the address coming from
the vector argument.
Thirdly, validate that the memory element size is in range for the
vector element size for ldnt1. For ld1, we do this via independent
decode patterns, but for ldnt1 we need to do it manually.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/826
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220308031655.240710-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When RI2 is 0x80000000, qemu enters an infinite loop instead of jumping
backwards. Fix by adding a missing cast, like in in2_ri2().
Fixes: 7233f2ed17 ("target-s390: Convert BRANCH ON CONDITION")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220314104232.675863-3-iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When RI2 is 0x80000000, qemu enters an infinite loop instead of jumping
backwards. Fix by adding a missing cast, like in in2_ri2().
Fixes: 8ac33cdb8b ("Convert BRANCH AND SAVE")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220314104232.675863-2-iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Remove various build warnings
- Fix building with modules on macOS
- Fix mouse/keyboard GUI interactions
-----BEGIN PGP SIGNATURE-----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=PLdU
-----END PGP SIGNATURE-----
Merge tag 'darwin-20220315' of https://github.com/philmd/qemu into staging
Darwin-based host patches
- Remove various build warnings
- Fix building with modules on macOS
- Fix mouse/keyboard GUI interactions
# gpg: Signature made Tue 15 Mar 2022 12:52:19 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'darwin-20220315' of https://github.com/philmd/qemu: (21 commits)
MAINTAINERS: Volunteer to maintain Darwin-based hosts support
ui/cocoa: add option to swap Option and Command
ui/cocoa: capture all keys and combos when mouse is grabbed
ui/cocoa: release mouse when user switches away from QEMU window
ui/cocoa: add option to disable left-command forwarding to guest
ui/cocoa: Constify qkeycode translation arrays
configure: Pass filtered QEMU_OBJCFLAGS to meson
meson: Log QEMU_CXXFLAGS content in summary
meson: Resolve the entitlement.sh script once for good
osdep: Avoid using Clang-specific __builtin_available()
audio: Rename coreaudio extension to use Objective-C compiler
coreaudio: Always return 0 in handle_voice_change
audio: Log context for audio bug
audio/dbus: Fix building with modules on macOS
audio/coreaudio: Remove a deprecation warning on macOS 12
block/file-posix: Remove a deprecation warning on macOS 12
hvf: Remove deprecated hv_vcpu_flush() calls
hvf: Make hvf_get_segments() / hvf_put_segments() local
hvf: Use standard CR0 and CR4 register definitions
tests/fp/berkeley-testfloat-3: Ignore ignored #pragma directives
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* VSS header fixes (Marc-André)
* 5-level EPT support (Vitaly)
* AMX support (Jing Liu & Yang Zhong)
* Bundle changes to MSI routes (Longpeng)
* More precise emulation of #SS (Gareth)
* Disable ASAN testing
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIwb5QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOOUQf8DiNcq8XVVMdX946Qwa4pSxc4ZJtF
X+RkNsscluuLJ2vGEFKwPVps6c6UPqAhXUruZOQmcLmma511MsyJrxyfd4iRgPD2
tL1+n4RpfsbnTEGT8c6TFWWMEIOjLTbKmR/SIxuxpeVG3xlk6tlCevykrIdc90gP
vQIByTGFx3GwiPyDo0j92mA/CsWLnfq6zQ2Tox1xCyt8R+QDimqG0KGLc5RAyiyC
ZmilN2yaqizDfkIzinwHG6gP1NGwVUsrUNl4X9C4mwEMFnsXiyKP5n/BlDZ7w4Wb
QXalFpPg1hJxRGGvyta6OF9VmCfmK9Q0FNVWm1lPE5adn3ECHFo6FJKvfg==
=LVgf
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* whpx fixes in preparation for GDB support (Ivan)
* VSS header fixes (Marc-André)
* 5-level EPT support (Vitaly)
* AMX support (Jing Liu & Yang Zhong)
* Bundle changes to MSI routes (Longpeng)
* More precise emulation of #SS (Gareth)
* Disable ASAN testing
# gpg: Signature made Tue 15 Mar 2022 10:51:00 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (22 commits)
gitlab-ci: do not run tests with address sanitizer
KVM: SVM: always set MSR_AMD64_TSC_RATIO to default value
i386: Add Icelake-Server-v6 CPU model with 5-level EPT support
x86: Support XFD and AMX xsave data migration
x86: add support for KVM_CAP_XSAVE2 and AMX state migration
x86: Add AMX CPUIDs enumeration
x86: Add XFD faulting bit for state components
x86: Grant AMX permission for guest
x86: Add AMX XTILECFG and XTILEDATA components
x86: Fix the 64-byte boundary enumeration for extended state
linux-headers: include missing changes from 5.17
target/i386: Throw a #SS when loading a non-canonical IST
target/i386: only include bits in pg_mode if they are not ignored
kvm/msi: do explicit commit when adding msi routes
kvm-irqchip: introduce new API to support route change
update meson-buildoptions.sh
qga/vss: update informative message about MinGW
qga/vss-win32: check old VSS SDK headers
meson: fix generic location of vss headers
vmxcap: Add 5-level EPT bit
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When building on macOS 11 [*], we get:
In file included from ../target/i386/hvf/hvf.c:59:
../target/i386/hvf/vmx.h:174:5: error: 'hv_vcpu_flush' is deprecated: first deprecated in macOS 11.0 - This API has no effect and always returns HV_UNSUPPORTED [-Werror,-Wdeprecated-declarations]
hv_vcpu_flush(vcpu);
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/Hypervisor.framework/Headers/hv.h:364:20: note: 'hv_vcpu_flush' has been explicitly marked deprecated here
extern hv_return_t hv_vcpu_flush(hv_vcpuid_t vcpu)
^
Since this call "has no effect", simply remove it ¯\_(ツ)_/¯
Not very useful deprecation doc:
https://developer.apple.com/documentation/hypervisor/1441386-hv_vcpu_flush
[*] Also 10.15 (Catalina):
https://lore.kernel.org/qemu-devel/Yd3DmSqZ1SiJwd7P@roolebo.dev/
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Both hvf_get_segments/hvf_put_segments() functions are only
used within x86hvf.c: do not declare them as public API.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
No need to have our own definitions of these registers.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* Removal of user-created PHB devices
* Avocado fixes for --disable-tcg
* Instruction and Radix MMU fixes
-----BEGIN PGP SIGNATURE-----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=A6RF
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220314' of https://github.com/legoater/qemu into staging
ppc-7.0 queue :
* Removal of user-created PHB devices
* Avocado fixes for --disable-tcg
* Instruction and Radix MMU fixes
# gpg: Signature made Mon 14 Mar 2022 15:16:07 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20220314' of https://github.com/legoater/qemu:
ppc/pnv: Remove user-created PHB{3,4,5} devices
ppc/pnv: Always create the PHB5 PEC devices
ppc/pnv: Introduce a pnv-phb5 device to match root port
ppc/xive2: Make type Xive2EndSource not user creatable
target/ppc: fix xxspltw for big endian hosts
target/ppc: fix ISI fault cause for Radix MMU
avocado/ppc_virtex_ml507.py: check TCG accel in test_ppc_virtex_ml507()
avocado/ppc_prep_40p.py: check TCG accel in all tests
avocado/ppc_mpc8544ds.py: check TCG accel in test_ppc_mpc8544ds()
avocado/ppc_bamboo.py: check TCG accel in test_ppc_bamboo()
avocado/ppc_74xx.py: check TCG accel for all tests
avocado/ppc_405.py: check TCG accel in test_ppc_ref405ep()
avocado/ppc_405.py: remove test_ppc_taihu()
avocado/boot_linux_console.py: check TCG accel in test_ppc_mac99()
avocado/boot_linux_console.py: check TCG accel in test_ppc_g3beige()
avocado/replay_kernel.py: make tcg-icount check in run_vm()
avocado/boot_linux_console.py: check tcg accel in test_ppc64_e500
avocado/boot_linux_console.py: check for tcg in test_ppc_powernv8/9
qtest/meson.build: check CONFIG_TCG for boot-serial-test in qtests_ppc
qtest/meson.build: check CONFIG_TCG for prom-env-test in qtests_ppc
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even when the feature is not supported in guest CPUID,
still set the msr to the default value which will
be the only value KVM will accept in this case
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220223115824.319821-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows 11 with WSL2 enabled (Hyper-V) fails to boot with Icelake-Server
{-v5} CPU model but boots well with '-cpu host'. Apparently, it expects
5-level paging and 5-level EPT support to come in pair but QEMU's
Icelake-Server CPU model lacks the later. Introduce 'Icelake-Server-v6'
CPU model with 'vmx-page-walk-5' enabled by default.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220221145316.576138-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
XFD(eXtended Feature Disable) allows to enable a
feature on xsave state while preventing specific
user threads from using the feature.
Support save and restore XFD MSRs if CPUID.D.1.EAX[4]
enumerate to be valid. Likewise migrate the MSRs and
related xsave state necessarily.
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-8-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When dynamic xfeatures (e.g. AMX) are used by the guest, the xsave
area would be larger than 4KB. KVM_GET_XSAVE2 and KVM_SET_XSAVE
under KVM_CAP_XSAVE2 works with a xsave buffer larger than 4KB.
Always use the new ioctls under KVM_CAP_XSAVE2 when KVM supports it.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-7-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add AMX primary feature bits XFD and AMX_TILE to
enumerate the CPU's AMX capability. Meanwhile, add
AMX TILE and TMUL CPUID leaf and subleaves which
exist when AMX TILE is present to provide the maximum
capability of TILE and TMUL.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-6-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel introduces XFD faulting mechanism for extended
XSAVE features to dynamically enable the features in
runtime. If CPUID (EAX=0Dh, ECX=n, n>1).ECX[2] is set
as 1, it indicates support for XFD faulting of this
state component.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-5-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kernel allocates 4K xstate buffer by default. For XSAVE features
which require large state component (e.g. AMX), Linux kernel
dynamically expands the xstate buffer only after the process has
acquired the necessary permissions. Those are called dynamically-
enabled XSAVE features (or dynamic xfeatures).
There are separate permissions for native tasks and guests.
Qemu should request the guest permissions for dynamic xfeatures
which will be exposed to the guest. This only needs to be done
once before the first vcpu is created.
KVM implemented one new ARCH_GET_XCOMP_SUPP system attribute API to
get host side supported_xcr0 and Qemu can decide if it can request
dynamically enabled XSAVE features permission.
https://lore.kernel.org/all/20220126152210.3044876-1-pbonzini@redhat.com/
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Message-Id: <20220217060434.52460-4-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AMX TILECFG register and the TMMx tile data registers are
saved/restored via XSAVE, respectively in state component 17
(64 bytes) and state component 18 (8192 bytes).
Add AMX feature bits to x86_ext_save_areas array to set
up AMX components. Add structs that define the layout of
AMX XSAVE areas and use QEMU_BUILD_BUG_ON to validate the
structs sizes.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-3-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The extended state subleaves (EAX=0Dh, ECX=n, n>1).ECX[1]
indicate whether the extended state component locates
on the next 64-byte boundary following the preceding state
component when the compacted format of an XSAVE area is
used.
Right now, they are all zero because no supported component
needed the bit to be set, but the upcoming AMX feature will
use it. Fix the subleaves value according to KVM's supported
cpuid.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Loading a non-canonical address into rsp when handling an interrupt or
performing a far call should raise a #SS not a #GP.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/870
Signed-off-by: Gareth Webb <gareth.webb@umbralsoftware.co.uk>
Message-Id: <164529651121.25406.15337137068584246397-0@git.sr.ht>
[Move get_pg_mode to seg_helper.c for user-mode emulators. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LA57/PKE/PKS is only relevant in 64-bit mode, and NXE is only relevant if
PAE is in use. Since there is code that checks PG_MODE_LA57 to determine
the canonicality of addresses, make sure that the bit is not set by
mistake in 32-bit mode. While it would not be a problem because 32-bit
addresses by definition fit in both 48-bit and 57-bit address spaces,
it is nicer if get_pg_mode() actually returns whether a feature is enabled,
and it allows a few simplifications in the page table walker.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We invoke the kvm_irqchip_commit_routes() for each addition to MSI route
table, which is not efficient if we are adding lots of routes in some cases.
This patch lets callers invoke the kvm_irqchip_commit_routes(), so the
callers can decide how to optimize.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg00967.html
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20220222141116.2091-3-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes the following error triggered when stopping and resuming a 64-bit
Linux kernel via gdb:
qemu-system-x86_64.exe: WHPX: Failed to set virtual processor context, hr=c0350005
The previous logic for synchronizing the values did not take into account
that the lower 4 bits of the CR8 register, containing the priority level,
mapped to bits 7:4 of the APIC.TPR register (see section 10.8.6.1 of
Volume 3 of Intel 64 and IA-32 Architectures Software Developer's Manual).
The caused WHvSetVirtualProcessorRegisters() to fail with an error,
effectively preventing GDB from changing the guest context.
Signed-off-by: Ivan Shcherbakov <ivan@sysprogs.com>
Message-Id: <010b01d82874$bb4ef160$31ecd420$@sysprogs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure that pausing the VM while in 64-bit mode will set the
HF_CS64_MASK flag in env->hflags (see x86_update_hflags() in
target/i386/cpu.c).
Without it, the code in gdbstub.c would only use the 32-bit register values
when debugging 64-bit targets, making debugging effectively impossible.
Signed-off-by: Ivan Shcherbakov <ivan@sysprogs.com>
Message-Id: <00f701d82874$68b02000$3a106000$@sysprogs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a typo in the host endianness macro and add a simple test to detect
regressions.
Fixes: 9bb0048ec6 ("target/ppc: convert xxspltw to vector operations")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220310172047.61094-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fix Instruction Storage Interrupt (ISI) fault cause for Radix MMU,
when caused by missing PAGE_EXEC permission, to be
SRR1_NOEXEC_GUARD instead of DSISR_PROTFAULT.
This matches POWER9 hardware behavior.
Fixes: d5fee0bbe6 ("target/ppc: Implement ISA V3.00 radix page fault handler")
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Message-Id: <20220309192756.145283-1-leandro.lupori@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When building with clang version 13.0.0 (eg. Fedora 13.0.0-3.fc35),
two unused variables introduced by macro GATHER_FUNCTION and
SCATTER_FUNCTION will cause building process failure due to
[-Werror -Wunused-variable].
Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/831
Message-Id: <20220124064339.56027-1-zongyuan.li@smartx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
On Hexagon, c4 is an alias for predicate registers P3:0. If we assign to
c4 inside a packet with reads from predicate registers, the predicate
reads should get the old values.
Test case added to tests/tcg/hexagon/preg_alias.c
Co-authored-by: Michael Lambert <mlambert@cuicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-13-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fix typo that checked for 32 bit nan instead of 64 bit
Test case added in tests/tcg/hexagon/usr.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-11-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The float??_minnum implementation differs from Hexagon for SNaN,
it returns NaN, but Hexagon returns the other input. So, we use
float??_minimum_number.
Test cases added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220308190410.22355-1-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The arch_sf_recip_common function was calling float32_getexp which
adjusts for denorm, but the we actually need the raw exponent bits.
This function is called from 3 instructions
sfrecipa
sffixupn
sffixupd
Test cases added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-6-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Instead of checking for nan arguments, use float??_unordered_quiet
test cases added in a subsequent patch to more extensively test USR bits
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-4-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Versions V3 and earlier should treat the "K_const" and "length" values
as unsigned.
Modified circ_test_v3() in tests/tcg/hexagon/circ.c to reproduce the bug
Signed-off-by: Michael Lambert <mlambert@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-2-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
-----BEGIN PGP SIGNATURE-----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=ix0J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220307' into staging
target-arm queue:
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
# gpg: Signature made Mon 07 Mar 2022 16:46:06 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220307:
hw/arm/virt: Disable LPA2 for -machine virt-6.2
target/arm: Provide cpu property for controling FEAT_LPA2
ui/cocoa: Use the standard about panel
hw/intc/arm_gicv3_cpuif: Fix register names in ICV_HPPIR read trace event
hw/intc/arm_gicv3: Fix missing spaces in error log messages
hw/intc/arm_gicv3: Specify valid and impl in MemoryRegionOps
hw/intc/arm_gicv3_its: Add trace events for table reads and writes
hw/intc/arm_gicv3_its: Add trace events for commands
target/arm/translate-neon: Simplify align field check for VLD3
target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
osdep: Move memalign-related functions to their own header
util: Put qemu_vfree() in memalign.c
util: Use meson checks for valloc() and memalign() presence
util: Share qemu_try_memalign() implementation between POSIX and Windows
meson.build: Don't misdetect posix_memalign() on Windows
util: Return valid allocation for qemu_try_memalign() with zero size
util: Unify implementations of qemu_memalign()
util: Make qemu_oom_check() a static function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the previous commit 9ea89876f9d ("target/mips: Fix cycle
counter timing calculations"), MIPSCPU::cp0_count_rate is not
used anymore. We don't need it since it is already expressed
as mips_def_t::CCRes. Remove the duplicate and clean.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <>20211213102340.1847248-1-f4bug@amsat.org>
The cp0_count_ns value is calculated from the CP0_COUNT_RATE_DEFAULT
constant in target/mips/cpu.c. The cycle counter resolution is defined
per-CPU in target/mips/cpu-defs.c.inc; use this value for calculating
cp0_count_ns. Fixings timing problems on guest OSs for the 20Kc CPU
which has a CCRes of 1.
Signed-off-by: Simon Burge <simonb@NetBSD.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211213135125.18378-1-simonb@NetBSD.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG, allow
the feature to be disabled from -cpu max.
Since this kernel bug is present in the Fedora 31 image that
we test in avocado, disable lpa2 on the command-line.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For VLD3 (single 3-element structure to one lane), there is no
alignment specification and the alignment bits in the instruction
must be zero. This is bit [4] for the size=0 and size=1 cases, and
bits [5:4] for the size=2 case. We do this check correctly in
VLDST_single(), but we write it a bit oddly: in the 'case 3' code we
check for bit 0 of a->align (bit [4] of the insn), and then we fall
through to the 'case 2' code which checks bit 1 of a->align (bit [5]
of the insn) in the size 2 case. Replace this with just checking "is
a->align non-zero" for VLD3, which lets us drop the fall-through and
put the cases in this switch in numerical order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303113741.2156877-3-peter.maydell@linaro.org
For VLD1/VST1 (single element to one lane) we are only accessing one
register, and so the 'stride' is meaningless. The bits that would
specify stride (insn bit [4] for size=1, bit [6] for size=2) are
specified to be zero in the encoding (which would correspond to a
stride of 1 for VLD2/VLD3/VLD4 etc), and we must UNDEF if they are
not.
We failed to make this check, which meant that we would incorrectly
handle some instruction patterns as loads or stores instead of
UNDEFing them. Enforce that stride == 1 for the nregs == 1 case.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/890
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303113741.2156877-2-peter.maydell@linaro.org
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220305233415.64627-3-philippe.mathieu.daude@gmail.com>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
HexagonCPU field parent_class is of type CPUClass, which
is declared in "hw/core/cpu.h".
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-11-f4bug@amsat.org>
These target-specific files use the target-specific CPU state
but lack to include "cpu.h"; i.e.:
../target/riscv/pmp.h:61:23: error: unknown type name 'CPURISCVState'
void pmpcfg_csr_write(CPURISCVState *env, uint32_t reg_index,
^
../target/nios2/mmu.h:43:18: error: unknown type name 'CPUNios2State'
void mmu_flip_um(CPUNios2State *env, unsigned int um);
^
../target/microblaze/mmu.h:88:19: error: unknown type name 'CPUMBState'; did you mean 'CPUState'?
uint32_t mmu_read(CPUMBState *env, bool ea, uint32_t rn);
^~~~~~~~~~
CPUState
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-10-f4bug@amsat.org>
excp_helper.c requires "exec/exec-all.h" for tlb_set_page_with_attrs()
and misc_helper.c for tlb_flush().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-8-f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-18-f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-17-f4bug@amsat.org>
Add cpu_thread_is_idle() to AccelOps, and implement it for the
KVM / WHPX accelerators.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-11-f4bug@amsat.org>
Mirror "sysemu/kvm.h" #ifdef'ry to define CONFIG_HAX_IS_POSSIBLE,
expose hax_allowed to hax_enabled() macro.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-9-f4bug@amsat.org>
Some ISA v2.03 Vector Multiply instructions marked to be ISA v2.07 only.
This patch fixes it.
Fixes: 80eca687c8 ("target/ppc: moved vector even and odd multiplication to decodetree")
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220304175156.2012315-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Change VSX Scalar Multiply-Add/Subtract Type-A/M Single Precision
helpers to use float64r32_muladd. This method should correctly handle
all rounding modes, so the workaround for float_round_nearest_even can
be dropped.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
* Fixup checks for ext_zb[abcs]
* Add AIA support for virt machine
* Increase maximum number of CPUs in virt machine
* Fixup OpenTitan SPI address
* Add support for zfinx, zdinx and zhinx{min} extensions
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmIgUZ8ACgkQIeENKd+X
cFTzegf8DbUYFLpyfURm6bJoJfLQHjtjB4Hs6PnszJZZAEtC6Ia+551TDjh93vTf
GTbpWm0BlugQqEeyg+Mioe2mb2EhK2w208RGXRSDjT9QFVOaIp83NDAjaQTPqs22
XC35ygJYuo1Yf0WoJV77aB6IYPZB3ba5i+dkGb6lk60Ru5ULqoLvqp73tNe5KvNB
uVAEy+ubzjmzWs5hGPw95HqTIbcMGnlHew4XU6xJaiJixSy71Z5nOCCn+2sxk+6A
QW59Onglyfk01F9ac3GMLvi2e+FUdj0S0y07oVqchzxXWYpYwgTO4Xkt794c8mqU
T02kuelfubr1qH1z/IolStju1JnaXw==
=LzOY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20220303' into staging
Fifth RISC-V PR for QEMU 7.0
* Fixup checks for ext_zb[abcs]
* Add AIA support for virt machine
* Increase maximum number of CPUs in virt machine
* Fixup OpenTitan SPI address
* Add support for zfinx, zdinx and zhinx{min} extensions
# gpg: Signature made Thu 03 Mar 2022 05:26:55 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20220303:
target/riscv: expose zfinx, zdinx, zhinx{min} properties
target/riscv: add support for zhinx/zhinxmin
target/riscv: add support for zdinx
target/riscv: add support for zfinx
target/riscv: hardwire mstatus.FS to zero when enable zfinx
target/riscv: add cfg properties for zfinx, zdinx and zhinx{min}
hw: riscv: opentitan: fixup SPI addresses
hw/riscv: virt: Increase maximum number of allowed CPUs
docs/system: riscv: Document AIA options for virt machine
hw/riscv: virt: Add optional AIA IMSIC support to virt machine
hw/intc: Add RISC-V AIA IMSIC device emulation
hw/riscv: virt: Add optional AIA APLIC support to virt machine
target/riscv: fix inverted checks for ext_zb[abcs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously, we would avoid setting CPU_INTERRUPT_HARD when interrupts
are disabled at a particular point in time, instead queuing the value
into cpu->irq_pending. This is more complicated than required.
Instead, set CPU_INTERRUPT_HARD any time there is a pending interrupt,
and exclusively check for interrupts disabled in nios2_cpu_exec_interrupt.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It was never correct to be able to write to ipending.
Until the rest of the irq code is tidied, the read of
ipending will generate an "unnecessary" mask.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create three separate functions for the three separate registers.
Avoid extra dispatch through op_helper.c.
Dispatch to the correct function in translation.
Clean up the ifdefs in wrctl.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will avoid having to replicate the check to additional cases.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can thus remove an ifdef covering the entire file.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This functionality can be had via plugins, if desired.
In the meantime, it is unused code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Co-authored-by: ardxwe <ardxwe@gmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220211043920.28981-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Co-authored-by: ardxwe <ardxwe@gmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220211043920.28981-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While changing to the use of cfg_ptr, the conditions for REQUIRE_ZB[ABCS]
inadvertently became inverted and slipped through the initial testing (which
used RV64GC_XVentanaCondOps as a target).
This fixes the regression.
Tested against SPEC2017 w/ GCC 12 (prerelease) for RV64GC_zba_zbb_zbc_zbs.
Fixes: f2a32bec8f ("target/riscv: access cfg structure through DisasContext")
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220203153946.2676353-1-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When we're using KVM, the PSCI implementation is provided by the
kernel, but QEMU has to tell the guest about it via the device tree.
Currently we look at the KVM_CAP_ARM_PSCI_0_2 capability to determine
if the kernel is providing at least PSCI 0.2, but if the kernel
provides a newer version than that we will still only tell the guest
it has PSCI 0.2. (This is fairly harmless; it just means the guest
won't use newer parts of the PSCI API.)
The kernel exposes the specific PSCI version it is implementing via
the ONE_REG API; use this to report in the dtb that the PSCI
implementation is 1.0-compatible if appropriate. (The device tree
binding currently only distinguishes "pre-0.2", "0.2-compatible" and
"1.0-compatible".)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220224134655.1207865-1-peter.maydell@linaro.org
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
4k or 16k pages.
This introduces the DS bit to TCR_ELx, which is RES0 unless the
page size is enabled and supports LPA2, resulting in the effective
value of DS for a given table walk. The DS bit changes the format
of the page table descriptor slightly, moving the PS field out to
TCR so that all pages have the same sharability and repurposing
those bits of the page table descriptor for the highest bits of
the output address.
Do not yet enable FEAT_LPA2; we need extra plumbing to avoid
tickling an old kernel bug.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We support 16k pages, but do not advertize that in ID_AA64MMFR0.
The value 0 in the TGRAN*_2 fields indicates that stage2 lookups defer
to the same support as stage1 lookups. This setting is deprecated, so
indicate support for all stage2 page sizes directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220301215958.157011-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For FEAT_LPA2, we will need other ARMVAParameters, which themselves
depend on the translation granule in use. We might as well validate
that the given TG matches; the architecture "does not require that
the instruction invalidates any entries" if this is not true.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The shift of the BaseADDR field depends on the translation
granule in use.
Fixes: 84940ed825 ("target/arm: Add support for FEAT_TLBIRANGE")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Merge tlbi_aa64_range_get_length and tlbi_aa64_range_get_base,
returning a structure containing both results. Pass in the
ARMMMUIdx, rather than the digested two_ranges boolean.
This is in preparation for FEAT_LPA2, where the interpretation
of 'value' depends on the effective value of DS for the regime.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With FEAT_LPA2, rather than introducing translation level 4,
we introduce level -1, below the current level 0. Extend
arm_fi_to_lfsc to handle these faults.
Assert that this new translation level does not leak into
fault types for which it is not defined, which allows some
masking of fi->level to be removed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
64k pages. The only thing left at this point is to handle the
extra bits in the TTBR and in the table descriptors.
Note that PAR_EL1 and HPFAR_EL2 are nominally extended, but we don't
mask out the high bits when writing to those registers, so no changes
are required there.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature is relatively small, as it applies only to
64k pages and thus requires no additional changes to the
table descriptor walking algorithm, only a change to the
minimum TSZ (which is the inverse of the maximum virtual
address space size).
Note that this feature widens VBAR_ELx, but we already
treat the register as being 64 bits wide.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The original A.a revision of the AArch64 ARM required that we
force-extend the addresses in these registers from 49 bits.
This language has been loosened via a combination of IMPLEMENTATION
DEFINED and CONSTRAINTED UNPREDICTABLE to allow consideration of
the entire aligned address.
This means that we do not have to consider whether or not FEAT_LVA
is enabled, and decide from which bit an address might need to be
extended.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This field controls the output (intermediate) physical address size
of the translation process. V8 requires to raise an AddressSize
fault if the page tables are programmed incorrectly, such that any
intermediate descriptor address, or the final translated address,
is out of range.
Add a PS field to ARMVAParameters, and properly compute outputsize
in get_phys_addr_lpae. Test the descaddr as extracted from TTBR
and from page table entries.
Restrict descaddrmask so that we won't raise the fault for v7.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The macro is a bit more readable than the inlined computation.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass down the width of the output address from translation.
For now this is still just PAMax, but a subsequent patch will
compute the correct value from TCR_ELx.{I}PS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will shortly share parts of this function with other portions
of address translation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without FEAT_LVA, the behaviour of programming an invalid value
is IMPLEMENTATION DEFINED. With FEAT_LVA, programming an invalid
minimum value requires a Translation fault.
It is most self-consistent to choose to generate the fault always.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set this as the kernel would, to 48 bits, to keep the computation
of the address space correct for PAuth.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
handle_simd_shift_fpint_conv() was accidentally freeing the TCG
temporary tcg_fpstatus too early, before the last use of it. Move
the free down to where it belongs.
Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: cleaned up commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support the latest PSCI on TCG and HVF. A 64-bit function called from
AArch32 now returns NOT_SUPPORTED, which is necessary to adhere to SMC
Calling Convention 1.0. It is still not compliant with SMCCC 1.3 since
they do not implement mandatory functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220213035753.34577-1-akihiko.odaki@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: update MISMATCH_CHECK checks on PSCI_VERSION macros to match]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refactor VSX_SCALAR_CMP_DP, changing its name to VSX_SCALAR_CMP and
prepare the helper to be used for quadword comparisons.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225210936.1749575-41-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
xscmpnedp was added in ISA v3.0 but removed in v3.0B. This patch
removes this instruction as it was not in the final version of v3.0.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-40-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Implement the following PowerISA v3.1 instructions:
vcmpgtsq: Vector Compare Greater Than Signed Quadword
vcmpgtuq: Vector Compare Greater Than Unsigned Quadword
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-13-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Move the following instructions to decodetree:
vextsb2w: Vector Extend Sign Byte To Word
vextsh2w: Vector Extend Sign Halfword To Word
vextsb2d: Vector Extend Sign Byte To Doubleword
vextsh2d: Vector Extend Sign Halfword To Doubleword
vextsw2d: Vector Extend Sign Word To Doubleword
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Based on [1] by Lijun Pan <ljp@linux.ibm.com>, which was never merged
into master.
[1]: https://lists.gnu.org/archive/html/qemu-ppc/2020-07/msg00419.html
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-7-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Based on [1] by Lijun Pan <ljp@linux.ibm.com>, which was never merged
into master.
[1]: https://lists.gnu.org/archive/html/qemu-ppc/2020-07/msg00419.html
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Changed vmulhuw, vmulhud, vmulhsw, vmulhsd to not
use helpers.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225210936.1749575-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
New macros that add FLAGS and FLAGS2 checking were added for
both TRANS and TRANS64.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
[ferst: - TRANS_FLAGS2 instead of TRANS_FLAGS_E
- Use the new macros in load/store vector insns ]
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch adds the EBB exception support that are triggered by
Performance Monitor alerts. This happens when a Performance Monitor
alert occurs and MMCR0_EBE, BESCR_PME and BESCR_GE are set.
fire_PMC_interrupt() will execute the raise_ebb_perfm_exception() helper
which will check for MMCR0_EBE, BESCR_PME and BESCR_GE bits. If all bits
are set, do_ebb() will attempt to trigger a PERFM EBB event.
If the EBB facility is enabled in both FSCR and HFSCR we consider that
the EBB is valid and set BESCR_PMEO. After that, if we're running in
problem state, fire a POWERPC_EXCP_PERM_EBB immediately. Otherwise we'll
queue a PPC_INTERRUPT_EBB.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225101140.1054160-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
PPC_INTERRUPT_EBB is a new interrupt that will be used to deliver EBB
exceptions that had to be postponed because the thread wasn't in problem
state at the time the event-based branch was supposed to occur.
ISA 3.1 also defines two EBB exceptions: Performance Monitor EBB
exception and External EBB exception. They are being added as
POWERPC_EXCP_PERFM_EBB and POWERPC_EXCP_EXTERNAL_EBB.
PPC_INTERRUPT_EBB will check BESCR bits to see the EBB type that
occurred and trigger the appropriate exception. Both exceptions are
doing the same thing in this first implementation: clear BESCR_GE and
enter the branch with env->nip retrieved from SPR_EBBHR.
The checks being done by the interrupt code are msr_pr and BESCR_GE
states. All other checks (EBB facility check, BESCR_PME bit, specific
bits related to the event type) must be done beforehand.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There are still PMU exclusive bits to handle in fire_PMC_interrupt()
before implementing the EBB support. Let's finalize it now to avoid
dealing with PMU and EBB logic at the same time in the next patches.
fire_PMC_interrupt() will fire an Performance Monitor alert depending on
MMCR0_PMAE. If we are required to freeze the timers (MMCR0_FCECE) we'll
also need to update summaries and delete the existing overflow timers.
In all cases we're going to update the cycle counters.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is an exclusive TCG helper. Gating it with CONFIG_TCG and changing
meson.build accordingly will prevent problems --disable-tcg and
--disable-linux-user later on.
We're also changing the uses of !kvm_enabled() to tcg_enabled() to avoid
adding "defined(CONFIG_TCG)" ifdefs, since tcg_enabled() will be
defaulted to false with --disable-tcg and the block will always be
skipped.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The dh_alias redirect is intended to handle TCG types as distinguished
from C types. TCG does not distinguish signed int from unsigned int,
because they are the same size. However, we need to retain this
distinction for dh_typecode, lest we fail to extend abi types properly
for the host call parameters.
This bug was detected when running the 'arm' emulator on an s390
system. The s390 uses TCG_TARGET_EXTEND_ARGS which triggers code
in tcg_gen_callN to extend 32 bit values to 64 bits; the incorrect
sign data in the typemask for each argument caused the values to be
extended as unsigned values.
This simple program exhibits the problem:
static volatile int num = -9;
static volatile int den = -5;
int main(void)
{
int quo = num / den;
printf("num %d den %d quo %d\n", num, den, quo);
exit(0);
}
When run on the broken qemu, this results in:
num -9 den -5 quo 0
The correct result is:
num -9 den -5 quo 1
Fixes: 7319d83a73 ("tcg: Combine dh_is_64bit and dh_is_signed to dh_typecode")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/876
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCG implements everything we need to run basic z15 OS+software
Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220223223117.66660-3-dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
implements:
AND WITH COMPLEMENT (NCRK, NCGRK)
NAND (NNRK, NNGRK)
NOT EXCLUSIVE OR (NXRK, NXGRK)
NOR (NORK, NOGRK)
OR WITH COMPLEMENT (OCRK, OCGRK)
SELECT (SELR, SELGR)
SELECT HIGH (SELFHR)
MOVE RIGHT TO LEFT (MVCRL)
POPULATION COUNT (POPCNT)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/737
Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220223223117.66660-2-dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We previously loaded into in1, but in1 is not filled during
disassembly and hence always zero. This leads to an assertion failure:
qemu-system-s390x: /home/nrb/qemu/include/tcg/tcg.h:654: temp_idx:
Assertion `n >= 0 && n < tcg_ctx->nb_temps' failed.`
Instead, use in2_la2_m64a to load from storage into in2 and pass that to
the helper, which matches what we already do for SCKC.
This fixes the SCK test I sent here under TCG:
<https://www.spinics.net/lists/kvm/msg265169.html>
Fixes: 9dc67537 ("s390x/tcg: implement SET CLOCK ")
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Message-Id: <20220126084201.774457-1-nrb@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Some small fixes for the qtests
* Misc header cleanups by Philippe
-----BEGIN PGP SIGNATURE-----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=/azS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-02-21' into staging
* Improve virtio-net failover test
* Some small fixes for the qtests
* Misc header cleanups by Philippe
# gpg: Signature made Mon 21 Feb 2022 11:40:37 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-02-21: (25 commits)
hw/tricore: Remove unused and incorrect header
hw/m68k/mcf: Add missing 'exec/hwaddr.h' header
exec/exec-all: Move 'qemu/log.h' include in units requiring it
softmmu/runstate: Clean headers
linux-user: Add missing "qemu/timer.h" include
target: Add missing "qemu/timer.h" include
core/ptimers: Remove unnecessary 'sysemu/cpus.h' include
exec/ramblock: Add missing includes
qtest: Add missing 'hw/qdev-core.h' include
hw/acpi/memory_hotplug: Remove unused 'hw/acpi/pc-hotplug.h' header
hw/remote: Add missing include
hw/tpm: Clean includes
scripts: Remove the old switch-timer-api script
tests/qtest: failover: migration abort test with failover off
tests/qtest: failover: test migration if the guest doesn't support failover
tests/qtest: failover: check migration with failover off
tests/qtest: failover: check missing guest feature
tests/qtest: failover: check the feature is correctly provided
tests/qtest: failover: use a macro for check_one_card()
tests/qtest: failover: clean up pathname of tests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The last use of ENV_OFFSET was removed in 5e1401969b
("cpu: Move icount_decr to CPUNegativeOffsetState");
the commit of target/rx came in just afterward.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220203001252.37982-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There is no 'vr' field in AVRCPUClass.
Likely a copy/paste typo from CRISCPUClass ;)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220122001036.83267-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The "hardware version" machinery (qemu_set_hw_version(),
qemu_hw_version(), and the QEMU_HW_VERSION define) is used by fewer
than 10 files. Move it out from osdep.h into a new
qemu/hw-version.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-6-peter.maydell@linaro.org
Currently we don't allow guests under hvf to use the PAuth extension,
because we didn't have any special code to handle that, and therefore
in arm_cpu_pauth_finalize() we will sanitize the ID_AA64ISAR1 value
the guest sees to clear the PAuth related fields.
Add support for this in the same way that KVM does it, by defaulting
to "PAuth enabled" if the host CPU has it and allowing the user to
disable it via '-cpu pauth=no' on the command line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-7-peter.maydell@linaro.org
Currently when using hvf we mishandle '-cpu max': we fall through to
the TCG version of its initfn, which then sets a lot of feature bits
that the real host CPU doesn't have. The hvf accelerator code then
exposes these bogus ID register values to the guest because it
doesn't check that the host really has the features.
Make '-cpu host' be like '-cpu max' for hvf, as we do with kvm.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-6-peter.maydell@linaro.org
Now that the if() branch of the condition in aarch64_max_initfn()
returns early, we don't need to keep the rest of the code in
the function inside an else block. Remove the else, unindenting
that code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-5-peter.maydell@linaro.org
Currently for KVM the intention is that '-cpu max' and '-cpu host'
are the same thing, but because we did this with two separate
pieces of code they have got a little bit out of sync. Specifically,
'max' has a 'sve-max-vq' property, and 'host' does not.
Bring the two together by having the initfn for 'max' actually
call the initfn for 'host'. This will result in 'max' no longer
exposing the 'sve-max-vq' property when using KVM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-4-peter.maydell@linaro.org
Use the aarch64_cpu_register() machinery to register the 'host' CPU
type. This doesn't gain us anything functionally, but it does mean
that the code for initializing it looks more like that for the other
CPU types, in that its initfn then doesn't need to call
arm_cpu_post_init() (because aarch64_cpu_instance_init() does that
for it).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-3-peter.maydell@linaro.org
Now that KVM has dropped AArch32 host support, the 'host' CPU type is
always AArch64, and we can move it to cpu64.c. This move will allow
us to share code between it and '-cpu max', which should behave
the same as '-cpu host' when using KVM or HVF.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-2-peter.maydell@linaro.org
Recent Linux versions added support to read ID_AA64ISAR2_EL1. On M1,
those reads trap into QEMU which handles them as faults.
However, AArch64 ID registers should always read as RES0. Let's
handle them accordingly.
This fixes booting Linux 5.17 guests.
Cc: qemu-stable@nongnu.org
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20220209124135.69183-2-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are parsing the syndrome field for sysregs in multiple places across
the hvf code, but repeat shift/mask operations with hard coded constants
every time. This is an error prone approach and makes it harder to reason
about the correctness of these operations.
Let's introduce macros that allow us to unify the constants used as well
as create new helpers to extract fields from the sysreg value.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Cameron Esfahani <dirty@apple.com <mailto:dirty@apple.com>>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220209124135.69183-1-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
timer_new_ns(), cpu_get_host_ticks() and NANOSECONDS_PER_SECOND are
declared in "qemu/timer.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220207082756.82600-8-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's leave cpu_init with just generic CPU initialization and
QOM-related functions.
The rest of the SPR registration functions will be moved in the
following patches along with the code that uses them. These are only
the commonly used ones.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-28-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These will need to be accessed from other files once we move the CPUs
code to separate files.
The check_pow_hid0 and check_pow_hid0_74xx are too specific to be
moved to a header so I'll deal with them later when splitting this
code between the multiple CPU families.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-27-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Put the SPR registration macros in a header that is accessible outside
of cpu_init.c. The following patches will move CPU-specific code to
separate files and will need to access it.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-26-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The following patches will move CPU-specific code into separate files,
so expose the most used SPR registration functions:
register_sdr1_sprs | 22 callers
register_low_BATs | 20 callers
register_non_embedded_sprs | 19 callers
register_high_BATs | 10 callers
register_thrm_sprs | 8 callers
register_usprgh_sprs | 6 callers
register_6xx_7xx_soft_tlb | only 3 callers, but it helps to
keep the soft TLB code consistent.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-25-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Initial intent for the spr_tcg header was to expose the spr_read|write
callbacks that are only used by TCG code. However, although these
routines are TCG-specific, the KVM code needs access to env->sprs
which creation is currently coupled to the callback registration.
We are probably not going to decouple SPR creation and TCG callback
registration any time soon, so let's rename the header to spr_common
to accomodate the register_*_sprs functions that will be moved out of
cpu_init.c in the following patches.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-24-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This function registers just one SPR and has only two callers, so open
code it.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-23-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The important part of this function is that it applies to non-embedded
CPUs, not that it also applies to the 601. We removed support for the
601 anyway, so rename this function.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-22-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The init_proc_755 function is identical to the 745 one except for the
755-specific registers. I think it is worth it to make them share
code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-21-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
init_proc_603 is defined after init_proc_e300, so I had to move some
code around to make it work.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-19-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is done to improve init_proc readability and to make subsequent
patches that touch this code a bit cleaner.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-18-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is done to improve init_proc readability and to make subsequent
patches that touch this code a bit cleaner.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-17-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is just to have 755-specific registers contained into a function,
intead of leaving them open-coded in init_proc_755. It makes init_proc
easier to read and keeps later patches that touch this code a bit
cleaner.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-16-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 745 and 755 can share the HID registration, so move it all into
register_755_sprs, which applies for both CPUs.
Also rename that function to register_745_sprs, since the 745 is the
earliest of the two. This will help with separating 755-specific
registers in a subsequent patch.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-14-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Move some of the 440 registers that are being repeated in the 440*
CPUs to register_440_sprs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We're considering these two to be from different CPU families, so
duplicate some code to keep them separate.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We're considering these two to be in different CPU families (6xx and
7xx), so keep their SPR registration separate.
The code was copied into register_G2_sprs and the common function was
renamed to apply only to the 755.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make sure that every register_*_sprs function only has calls to
spr_register* to register individual SPRs. Do not allow nesting. This
makes the code easier to follow and a look at init_proc_* should
suffice to know what SPRs a CPU has.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that the 601 was removed, all of our CPUs have a timebase, so that
can be moved into the common function.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The top level init_proc calls register_generic_sprs but also registers
some other SPRs outside of that function. Let's group everything into
a single place.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The G2LE CPU initialization code is the same as the G2. Use the latter
for both.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The /* XXX : not implemented */ comments all over cpu_init are
confusing and ambiguous.
Do they mean not implemented by QEMU, not implemented in a specific
access mode? Not implemented by the CPU? Do they apply to just the
register right after or to a whole block? Do they mean we have an
action to take in the future to implement these? Are they only
informative?
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce virtual hypervisor methods that can support a "Nested KVM HV"
implementation using the bare metal 2-level radix MMU, and using HV
exceptions to return from H_ENTER_NESTED (rather than cause interrupts).
HV exceptions can now be raised in the TCG spapr machine when running a
nested KVM HV guest. The main ones are the lev==1 syscall, the hdecr,
hdsi and hisi, hv fu, and hv emu, and h_virt external interrupts.
HV exceptions are intercepted in the exception handler code and instead
of causing interrupts in the guest and switching the machine to HV mode,
they go to the vhyp where it may exit the H_ENTER_NESTED hcall with the
interrupt vector numer as return value as required by the hcall API.
Address translation is provided by the 2-level page table walker that is
implemented for the bare metal radix MMU. The partition scope page table
is pointed to the L1's partition scope by the get_pate vhc method.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220216102545.1808018-9-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This moves the logic to reset the QEMU exception state into its own
function.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-8-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The virtual hypervisor currently always intercepts and handles
hypercalls but with a future change this will not always be the case.
Add a helper for the test so the logic is abstracted from the mechanism.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220216102545.1808018-7-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In prepartion for implementing a full partition table option for
vhyp, update the get_pate method to take an lpid and return a
success/fail indicator.
The spapr implementation currently just asserts lpid is always 0
and always return success.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-6-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The radix on vhyp MMU uses a single-level radix table walk, with the
partition scope mapping provided by the flat QEMU machine memory.
A subsequent change will use the two-level radix walk on vhyp in some
situations, so provide a helper which can abstract that logic.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220216102545.1808018-5-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Invalid or missing partition table entry exceptions should cause HV
interrupts. HDSISR is set to bad MMU config, which is consistent with
the ISA and experimentally matches what POWER9 generates.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-2-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
- add PTE_PBMT bits: It uses two PTE bits, but otherwise has no effect on QEMU, since QEMU is sequentially consistent and doesn't model PMAs currently
- add PTE_PBMT bit check for inner PTE
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- sinval.vma, hinval.vvma and hinval.gvma do the same as sfence.vma, hfence.vvma and hfence.gvma except extension check
- do nothing other than extension check for sfence.w.inval and sfence.inval.ir
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add PTE_N bit
- add PTE_N bit check for inner PTE
- update address translation to support 64KiB continuous region (napot_bits = 4)
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For non-leaf PTEs, the D, A, and U bits are reserved for future standard use.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Highest bits of PTE has been used for svpbmt, ref: [1], [2], so we
need to ignore them. They cannot be a part of ppn.
1: The RISC-V Instruction Set Manual, Volume II: Privileged Architecture
4.4 Sv39: Page-Based 39-bit Virtual-Memory System
4.5 Sv48: Page-Based 48-bit Virtual-Memory System
2: https://github.com/riscv/virtual-memory/blob/main/specs/663-Svpbmt-diff.pdf
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We add "x-aia" command-line option for RISC-V HART using which
allows users to force enable CPU AIA CSRs without changing the
interrupt controller available in RISC-V machine.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-18-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specification defines IMSIC interface CSRs for easy access
to the per-HART IMSIC registers without using indirect xiselect and
xireg CSRs. This patch implements the AIA IMSIC interface CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-16-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specification introduces new [m|s|vs]topi CSRs for
reporting pending local IRQ number and associated IRQ priority.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-14-anup@brainfault.org
[ Changed by AF:
- Fixup indentation
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specificaiton adds interrupt filtering support for M-mode
and HS-mode. Using AIA interrupt filtering M-mode and H-mode can
take local interrupt 13 or above and selectively inject same local
interrupt to lower privilege modes.
At the moment, we don't have any local interrupts above 12 so we
add dummy implementation (i.e. read zero and ignore write) of AIA
interrupt filtering CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-13-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA hvictl and hviprioX CSRs allow hypervisor to control
interrupts visible at VS-level. This patch implements AIA hvictl
and hviprioX CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-12-anup@brainfault.org
[ Changes by AF:
- Fix possible unintilised variable error in rmw_sie()
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specification adds new CSRs for RV32 so that RISC-V hart can
support 64 local interrupts on both RV32 and RV64.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-11-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA spec defines programmable 8-bit priority for each local interrupt
at M-level, S-level and VS-level so we extend local interrupt processing
to consider AIA interrupt priorities. The AIA CSRs which help software
configure local interrupt priorities will be added by subsequent patches.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220204174700.534953-10-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA device emulation (such as AIA IMSIC) should be able to set
(or provide) AIA ireg read-modify-write callback for each privilege
level of a RISC-V HART.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-9-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V AIA specification extends RISC-V local interrupts and
introduces new CSRs. This patch adds defines for the new AIA CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-8-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We define a CPU feature for AIA CSR support in RISC-V CPUs which
can be set by machine/device emulation. The RISC-V CSR emulation
will also check this feature for emulating AIA CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-7-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The machine or device emulation should be able to force set certain
CPU features because:
1) We can have certain CPU features which are in-general optional
but implemented by RISC-V CPUs on the machine.
2) We can have devices which require a certain CPU feature. For example,
AIA IMSIC devices expect AIA CSRs implemented by RISC-V CPUs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-6-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The guest external interrupts from an interrupt controller are
delivered only when the Guest/VM is running (i.e. V=1). This means
any guest external interrupt which is triggered while the Guest/VM
is not running (i.e. V=0) will be missed on QEMU resulting in Guest
with sluggish response to serial console input and other I/O events.
To solve this, we check and inject interrupt after setting V=1.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-5-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The hgeie and hgeip CSRs are required for emulating an external
interrupt controller capable of injecting virtual external interrupt
to Guest/VM running at VS-level.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-4-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A hypervisor can optionally take guest external interrupts using
SGEIP bit of hip and hie CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-3-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The guest should be able to set the vill bit as part of vsetvl.
Currently we may set env->vill to 1 in the vsetvl helper, but there
is nowhere that we set it to 0, so once it transitions to 1 it's stuck
there until the system is reset.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220201064601.41143-1-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the decoder and translation for the XVentanaCondOps custom
extension (vendor-defined by Ventana Micro Systems), which is
documented at https://github.com/ventanamicro/ventana-custom-extensions/releases/download/v1.0.0/ventana-custom-extensions-v1.0.0.pdf
This commit then also adds a guard-function (has_XVentanaCondOps_p)
and the decoder function to the table of decoders, enabling the
support for the XVentanaCondOps extension.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220202005249.3566542-7-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To split up the decoder into multiple functions (both to support
vendor-specific opcodes in separate files and to simplify maintenance
of orthogonal extensions), this changes decode_op to iterate over a
table of decoders predicated on guard functions.
This commit only adds the new structure and the table, allowing for
the easy addition of additional decoders in the future.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220202005249.3566542-6-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zb[abcs] support code still uses the RISCV_CPU macros to access
the configuration information (i.e., check whether an extension is
available/enabled). Now that we provide this information directly
from DisasContext, we can access this directly via the cfg_ptr field.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-5-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The implementation in trans_{rvi,rvv,rvzfh}.c.inc accesses the shallow
copies (in DisasContext) of some of the elements available in the
RISCVCPUConfig structure. This commit redirects accesses to use the
cfg_ptr copied into DisasContext and removes the shallow copies.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-4-philipp.tomsich@vrull.eu>
[ Changes by AF:
- Fixup checkpatch failures
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As the number of extensions is growing, copying them individiually
into the DisasContext will scale less and less... instead we populate
a pointer to the RISCVCPUConfig structure in the DisasContext.
This adds an extra indirection when checking for the availability of
an extension (compared to copying the fields into DisasContext).
While not a performance problem today, we can always (shallow) copy
the entire structure into the DisasContext (instead of putting a
pointer to it) if this is ever deemed necessary.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-3-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-2-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The addition of uxl support in gdbstub adds a few checks on the maximum
register length, but omitted MXL_RV128, an experimental feature.
This patch makes rv128 react as rv64, as previously.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220124202456.420258-1-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
I think these have been wrong since f193c7979c (do not depend on
thunk.h - more log items). Fix them so as not to confuse other
debugging.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220204204335.1689602-26-alex.bennee@linaro.org>
ISA v3.1 changed some VSX instructions behavior by changing what the
other words/doubleword in the result should contain when the result is
only one word/doubleword. e.g. xsmaxdp operates on doubleword 0 and
saves the result also in doubleword 0.
Before, the second doubleword result was undefined according to the
ISA, but now it's stated that it should be zeroed.
Even tough the result was undefined before, hardware implementing these
instructions already filled these fields with 0s. Changing every ISA
version in QEMU to this behavior makes the results match what happens
in hardware.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220204181944.65063-1-victor.colombo@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We don't really need to check for exception model while applying
AIL. We can check the lpcr_mask for the presence of
LPCR_AIL/LPCR_HAIL.
This removes one more instance of passing the exception model ID
around.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220207183036.1507882-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We currently abort QEMU during the dispatch of an interrupt if we try
to set MSR_HV without having MSR_HVB in the msr_mask. I think we
should verify this for all MSR bits. There is no reason to ever have a
MSR bit set if the corresponding bit is not set in that CPU's
msr_mask.
Note that this is not about the emulated code setting reserved
bits. We clear the new_msr when starting to dispatch an exception, so
if we end up with bits not present in the msr_mask that is a QEMU
programming error.
I kept the HSRR verification for BookS because it is the only CPU
family that has HSRRs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220207183036.1507882-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make the cpu-specific powerpc_excp_* functions a bit simpler by moving
the bounds check and logging to powerpc_excp.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220207183036.1507882-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that all CPU families have their own separate exception
dispatching code we can remove powerpc_excp_legacy.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220207183036.1507882-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 7xx CPUs don't have alternate/hypervisor Save and Restore
Registers, so we can set SRR0 and SRR1 directly.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This code applies only to the 7xx CPUs, so we can remove the switch
statement.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Thre is no HV support in the 7xx.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove the BookE code and add a comment explaining why we need to keep
hypercall support even though this CPU does not have a hypervisor
mode.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no ESR in the 7xx.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no MSR_HV in the 7xx so remove the LPES0 handling.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no MSR_HV in the 7xx.
Also remove 40x and BookE code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Alternate Interrupt Location.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DLTLB
POWERPC_EXCP_DSI
POWERPC_EXCP_DSTLB
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_IABR
POWERPC_EXCP_IFTLB
POWERPC_EXCP_ISI
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SMI
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for PowerPC 7xx CPUs
(740, 745, 750, 750cl, 750cx, 750fx, 750gx, 755). This commit copies
powerpc_excp_legacy verbatim so the next one has a clean diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Since we've split the exception code by exception model, the exception
model IDs are becoming less useful. These two can be merged.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 6xx CPUs don't have alternate/hypervisor Save and Restore
Registers, so we can set SRR0 and SRR1 directly.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-12-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This code applies only to the 6xx CPUs, so we can remove the switch
statement.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no HV support in the 6xx.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no Hypervisor mode in the 6xx CPUs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no ESR in the 6xx CPUs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no Hypervisor mode in the 6xx, so remove all LPES0 logic.
Also remove BookE IRQ code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no MSR_HV in the 6xx CPUs.
Also remove the 40x and BookE code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This only applies to the G2s, the other 6xx CPUs will not have this
vector registered.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for PowerPC 6xx CPUs
(603, 604, G2, MPC5xx, MCP8xx). This commit copies powerpc_excp_legacy
verbatim so the next one has a clean diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We don't need three separate exception model IDs for the 603, 604 and
G2.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PowerPC 601 processor is the first generation of processors to
implement the PowerPC architecture. It was designed as a bridge
processor and also could execute most of the instructions of the
previous POWER architecture. It was found on the first Macs and IBM
RS/6000 workstations.
There is not much interest in keeping the CPU model of this
POWER-PowerPC bridge processor. We have the 603 and 604 CPU models of
the 60x family which implement the complete PowerPC instruction set.
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203142756.1302515-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ppc_radix64_partition_scoped_xlate() logs the host page protection
bits variable but it is uninitialized. The value is set later on in
ppc_radix64_check_prot(). Remove the output.
Fixes: Coverity CID 1468942
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220203142145.1301749-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no MSR_HV in BookE, so remove all of the HV logic.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-12-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove the switch as this function applies to BookE only.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
QEMU does not support BookE as a hypervisor.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
BookE has no DSISR or DAR. The proper registers ESR and DEAR were
already set at this point.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no LPES0 in BookE and no MSR_HV.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The SRR1 should be set to the MSR value. There are no diagnostic bits
in the SRR1 for BookE.
Note that this fixes a bug where MSR_GS would be set and Linux would
go into KVM code when there's no KVM guest.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no DSISR or DAR in BookE. Change to ESR and DEAR.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no MSR_HV in BookE.
Also remove 40x code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for BookE CPUs. This
commit copies powerpc_excp_legacy verbatim so the next one has a clean
diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This CPU was partially removed due to lack of support in 2017 by commit
aef7796057 ("ppc: remove non implemented cpu models").
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220128221611.1221715-1-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The recently introduced debug tests in kvm-unit-tests exposed an error
in our handling of singlestep cause by stale hflags. This is caught by
--enable-debug-tcg when running the tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Andrew Jones <drjones@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220202122353.457084-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMCCC 1.3 spec section 5.2 says
The Unknown SMC Function Identifier is a sign-extended value of (-1)
that is returned in the R0, W0 or X0 registers. An implementation must
return this error code when it receives:
* An SMC or HVC call with an unknown Function Identifier
* An SMC or HVC call for a removed Function Identifier
* An SMC64/HVC64 call from AArch32 state
To comply with these statements, let's always return -1 when we encounter
an unknown HVC or SMC call.
[PMM:
This is a reinstatement of commit 9fcd15b919, previously
reverted in commit 4825eaae4fdd56fba0f; we can do this now that we
have arranged for all the affected board models to not enable the
PSCI emulation if they are running guest code at EL3. This avoids
the regressions that caused us to revert the change for 7.0.]
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to allow the psci-conduit property to be set after realize,
because the parts of the code which are best placed to decide if it's
OK to enable QEMU's builtin PSCI emulation (the board code and the
arm_load_kernel() function are distant from the code which creates
and realizes CPUs (typically inside an SoC object's init and realize
method) and run afterwards.
Since the DEFINE_PROP_* macros don't have support for creating
properties which can be changed after realize, change the property to
be created with object_property_add_uint32_ptr(), which is what we
already use in this function for creating settable-after-realize
properties like init-svtor and init-nsvtor.
Note that it doesn't conceptually make sense to change the setting of
the property after the machine has been completely initialized,
beacuse this would mean that the behaviour of the machine when first
started would differ from its behaviour when the system is
subsequently reset. (It would also require the underlying state to
be migrated, which we don't do.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20220127154639.2090164-2-peter.maydell@linaro.org
Use the named bit rather than a bare extract32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220127063428.30212-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When HCR_EL2.E2H is set, the format of CPTR_EL2 changes to
look more like CPACR_EL1, with ZEN and FPEN fields instead
of TZ and TFP fields.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220127063428.30212-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extract entire fields for ZEN and FPEN, rather than testing specific bits.
This makes it easier to follow the code versus the ARM spec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220127063428.30212-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYfrIogAKCRD3ErUQojoP
X93ZAP9hqp/FCz/goH7Tpqce6FspHriJm6Ej2Rd7HxZWmh4bpQD/cMjY8qpcA/6r
Nx4bgRPT6kCZwwLx7v2jZ2QsA2KaZAM=
=c0qO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/hppa-updates-pull-request' into staging
Fixes and updates for hppa target
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
# gpg: Signature made Wed 02 Feb 2022 18:08:34 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/hppa-updates-pull-request:
hw/display/artist: Fix draw_line() artefacts
hw/display/artist: Mouse cursor fixes for HP-UX
hw/display/artist: rewrite vram access mode handling
hppa: Add support for an emulated TOC/NMI button.
hw/hppa: Allow up to 16 emulated CPUs
seabios-hppa: Update SeaBIOS-hppa to VERSION 3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Almost all PA-RISC machines have either a button that is labeled with 'TOC' or
a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is
sent to the processor. This can be used for diagnostic purposes like obtaining
a stack trace/register dump or to enter KDB/KGDB in Linux.
This patch adds support for such an emulated TOC button.
It wires up the qemu monitor "nmi" command to trigger a TOC. For that it
provides the hppa_nmi function which is assigned to the nmi_monitor_handler
function pointer. When called it raises the EXCP_TOC hardware interrupt in the
hppa_cpu_do_interrupt() function. The interrupt function then calls the
architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address
0xf0000000).
According to the PA-RISC PDC specification, the SeaBIOS firmware then writes
the CPU registers into PIM (processor internal memmory) for later analysis. In
order to write all registers it needs to know the contents of the CPU "shadow
registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are
provided by qemu in shadow registers when entering the SeaBIOS TOC function.
This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which
restores the original values of the shadow registers. With this opcode SeaBIOS
can store those registers as well into PIM before calling an OS-provided TOC
handler.
To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the
command "nmi". After the TOC started the OS-debugger, exit the qemu monitor
with Ctrl-A C.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
-----BEGIN PGP SIGNATURE-----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=F/ek
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/quintela-gitlab/tags/migration-20220128-pull-request' into staging
Migration Pull request (Take 2)
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
# gpg: Signature made Fri 28 Jan 2022 18:30:25 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/quintela-gitlab/tags/migration-20220128-pull-request: (36 commits)
migration: Move temp page setup and cleanup into separate functions
migration: Simplify unqueue_page()
migration: Add postcopy_has_request()
migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat
migration: No off-by-one for pss->page update in host page size
migration: Tally pre-copy, downtime and post-copy bytes independently
migration: Introduce ram_transferred_add()
migration: Don't return for postcopy_send_discard_bm_ram()
migration: Drop return code for disgard ram process
migration: Do chunk page in postcopy_each_ram_send_discard()
migration: Drop postcopy_chunk_hostpages()
migration: Don't return for postcopy_chunk_hostpages()
migration: Drop dead code of ram_debug_dump_bitmap()
migration/ram: clean up unused comment.
migration: Report the error returned when save_live_iterate fails
migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished
migration/migration.c: Avoid COLO boot in postcopy migration
migration/migration.c: Add missed default error handler for migration state
Remove unnecessary minimum_version_id_old fields
multifd: Rename pages_used to normal_pages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 602 was derived from the PowerPC 603, for the gaming market it
seems. It was hardly used and no firmware supporting the CPU could be
found. Drop support.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL. (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)
We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.
Commit created with:
sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
It missed vmstate_ppc_cpu.
The exception caused by an SVC instruction may be taken to AArch32
Hyp mode for two reasons:
* HCR.TGE indicates that exceptions from EL0 should trap to EL2
* we were already in Hyp mode
The entrypoint in the vector table to be used differs in these two
cases: for an exception routed to Hyp mode from EL0, we enter at the
common 0x14 "hyp trap" entrypoint. For SVC from Hyp mode to Hyp
mode, we enter at the 0x08 (svc/hvc trap) entrypoint.
In the v8A Arm ARM pseudocode this is done in AArch32.TakeSVCException.
QEMU incorrectly routed both of these exceptions to the 0x14
entrypoint. Correct the entrypoint for SVC from Hyp to Hyp by making
use of the existing logic which handles "normal entrypoint for
Hyp-to-Hyp, otherwise 0x14" for traps like UNDEF and data/prefetch
aborts (reproduced here since it's outside the visible context
in the diff for this commit):
if (arm_current_el(env) != 2 && addr < 0x14) {
addr = 0x14;
}
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220117131953.3936137-1-peter.maydell@linaro.org
In an SMP system it can be unclear which CPU is taking an exception;
add the CPU index (which is the same value used in the TCG 'Trace
%d:' logging) to the "Taking exception" log line to clarify it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-2-peter.maydell@linaro.org
The 74xx does not have alternate/hypervisor Save and Restore
Registers, so we can set SRR0 and SRR1 directly.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The whole power saving states logic seems to be dependent on HV mode,
which don't exist for 74xx so I'm removing it all and leaving the
abort message.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove the BookE code and add a comment explaining why we need to keep
hypercall support even though this CPU does not have a hypervisor
mode.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 74xx don't have MSR_HV so all the LPES0 logic can be removed.
Also remove the BookE IRQ code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 74xx don't have an MSR_HV.
Also remove 40x and BookE code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Alternate Interrupt Location.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DSI
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_IABR
POWERPC_EXCP_ISI
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SMI
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
POWERPC_EXCP_VPU
POWERPC_EXCP_VPUA
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for PowerPC 74xx
CPUs. This commit copies powerpc_excp_legacy verbatim so the next one
has a clean diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Since this is now BookS only, we can simplify the code a bit and check
has_hv_mode instead of enumerating the exception models. LPES0 does
not make sense if there is no MSR_HV.
Note that QEMU does not support HV mode on 970 and POWER5+ so we don't
set MSR_HV in msr_mask.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220124184605.999353-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- Always uses HV_EMU if the CPU has MSR_HV;
- Exceptions always delivered in 64 bit.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DSEG
POWERPC_EXCP_DSI
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_FU
POWERPC_EXCP_HDECR
POWERPC_EXCP_HDSI
POWERPC_EXCP_HISI
POWERPC_EXCP_HVIRT
POWERPC_EXCP_HV_EMU
POWERPC_EXCP_HV_FU
POWERPC_EXCP_ISEG
POWERPC_EXCP_ISI
POWERPC_EXCP_MAINT
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SDOOR_HV
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_SYSCALL_VECTORED
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
POWERPC_EXCP_VPU
POWERPC_EXCP_VPUA
POWERPC_EXCP_VSXU
POWERPC_EXCP_HV_MAINT
POWERPC_EXCP_SDOOR
(I added the two above that were not being considered. They used to be
"Invalid exception". Now they become "Unimplemented exception" which
is more accurate.)
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220124184605.999353-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for BookS CPUs. This
commit copies powerpc_excp_legacy verbatim so the next one has a clean
diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220124184605.999353-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 Program Interrupt does not set SRR1 with any diagnostic bits,
just a clean copy of the MSR.
We're using the BookE Exception Syndrome Register which is different
from the 405.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: restored SPR_40x_ESR settings ]
Message-Id: <20220118184448.852996-14-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 ISI does not set SRR1 with any exception syndrome bits, only a
clean copy of the MSR.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg : Fixed removal which was done in the wrong routine ]
Message-Id: <20220118184448.852996-13-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 has no DSISR or DAR, so convert the trace entry to
use ESR and DEAR instead.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg : - changed registers to ESR and DEAR.
- updated commit log ]
Message-Id: <20220118184448.852996-12-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The current Debug exception dispatch is the BookE one, so it is
different from the 405. We effectively don't support the 405 Debug
exception.
This patch removes the BookE code and moves the DEBUG into the "not
implemented" block.
Note that there is in theory a functional change here since we now
abort when a Debug exception happens. However, given how it was never
implemented, I don't believe this to have ever been dispatched for the
405.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118184448.852996-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no DSISR in the 405. It uses DEAR which we already set
earlier at ppc_cpu_do_unaligned_access.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au
Message-Id: <20220118184448.852996-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
405 has no MSR_HV and EPR is BookE only so we can remove it all.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118184448.852996-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
powerpc_excp_40x applies only to the 405, so remove HV code and
references to BookE.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118184448.852996-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In powerpc_excp_40x the Critical exception is now for 405 only, so we
can remove the BookE and G2 blocks.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220118184448.852996-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV or MSR_LE;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Interrupts Little Endian;
- No Alternate Interrupt Location.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_CRITICAL
POWERPC_EXCP_DEBUG
POWERPC_EXCP_DSI
POWERPC_EXCP_DTLB
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FIT
POWERPC_EXCP_ISI
POWERPC_EXCP_ITLB
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PIT
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_WDT
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118184448.852996-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for 40x CPUs. This
commit copies powerpc_excp_legacy verbatim so the next one has a clean
diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220118184448.852996-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 MSR has the Machine Check Enable bit. We're making use of it
when dispatching Machine Check, so add the bit to the msr_mask.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220118184448.852996-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Bit 13 is the Wait State Enable bit. Give it its proper name.
As far as I can see we don't do anything with MSR_POW for the 405, so
this change has no effect.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220118184448.852996-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Commit cd0c6f4735 did not take into account 405 CPUs when adding
support to batching of TCG tlb flushes. Set the TLB_NEED_LOCAL_FLUSH
flag when the SPR_40x_PID is set or a TLB updated.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Fixes: cd0c6f4735 ("ppc: Do some batching of TCG tlb flushes")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113180352.1234512-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
POWERPC_MMU_BOOKE is not a mask and should not be tested with a
bitwise AND operator.
It went unnoticed because it only impacts the 601 CPU implementation
for which we don't have a known firmware image.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220124081609.3672341-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
cpu_interrupt_exittb() was introduced by commit 044897ef4a
("target/ppc: Fix system lockups caused by interrupt_request state
corruption") as a way to wrap cpu_interrupt() helper in BQL.
After that, commit 6d38666a89 ("ppc: Ignore the CPU_INTERRUPT_EXITTB
interrupt with KVM") added a condition to skip this interrupt if we're
running with KVM.
Problem is that the change made by the above commit, testing for
!kvm_enabled() at the start of cpu_interrupt_exittb():
static inline void cpu_interrupt_exittb(CPUState *cs)
{
if (!kvm_enabled()) {
return;
}
(... do cpu_interrupt(cs, CPU_INTERRUPT_EXITTB) ...)
is doing the opposite of what it intended to do. This will return
immediately if not kvm_enabled(), i.e. it's a emulated CPU, and if
kvm_enabled() it will proceed to fire CPU_INTERRUPT_EXITTB.
Fix the 'skip KVM' condition so the function is a no-op when
kvm_enabled().
CC: Greg Kurz <groug@kaod.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/809
Fixes: 6d38666a89 ("ppc: Ignore the CPU_INTERRUPT_EXITTB interrupt with KVM")
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220121160841.9102-1-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Book-E architecture does not set the error code in 31:27 bits
of SRR1, but instead uses these bits for custom fields such
as GS (Guest Supervisor).
Wrongly setting these fields will result in QEMU crashes
when attempting to execute not executable code due to the attempts
to use Guest Supervisor mode.
Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Greg Kurz <groug@kaod.org>
Cc: qemu-ppc@nongnu.org
Cc: qemu-devel@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220121093107.15478-1-cheptsov@ispras.ru>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
After a TLB miss exception, GPRs 0-3 must be restored on rfi.
This is managed by hreg_store_msr() which is called by do_rfi()
However, hreg_store_msr() does it if MSR[TGPR] is unset in the
passed MSR value.
The problem is that do_rfi() is given the content of SRR1 as
the value to be set in MSR, but TGPR bit is not part of SRR1
and that bit is used for something else and is sometimes set
to 1, leading to hreg_store_msr() not restoring GPRs.
So, do the same way as for POW bit, force clearing it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Cedric Le Goater <clg@kaod.org>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220120103824.239573-1-christophe.leroy@csgroup.eu>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-24-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-23-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When swap regs for hypervisor, the value of vsstatus or mstatus_hs
should have the right XLEN. Otherwise, it will propagate to mstatus.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-22-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When sew <= 32bits, not need to extend scalar reg.
When sew > 32bits, if xlen is less that sew, we should sign extend
the scalar register, except explicitly specified by the spec.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-21-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The mask comes from the pointer masking extension, or the max value
corresponding to XLEN bits.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220120122050.41546-20-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Only check the range that has passed the address translation.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-19-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-18-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-17-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We need not specially process vtype when XLEN changes.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-16-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use cached cur_pmmask and cur_pmbase to infer the
current PM mode.
This may decrease the TCG IR by one when pm_enabled
is true and pm_base_enabled is false.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-15-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Define one common function to compute a canonical address from a register
plus offset. Merge gen_pm_adjust_address into this function.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-14-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Replace the array of pm_mask/pm_base with scalar variables.
Remove the cached array value in DisasContext.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-13-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220120122050.41546-12-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Write mask is representing the bits we care about.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-11-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-10-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-9-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In some cases, we must restore the guest PC to the address of the start of
the TB, such as when the instruction counter hits zero. So extend pc register
according to current xlen for these cases.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-8-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The read from PC for translation is in cpu_get_tb_cpu_state, before translation.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-7-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Current xlen has been used in helper functions and many other places.
The computation of current xlen is not so trivial, so that we should
recompute it as little as possible.
Fortunately, xlen only changes in very seldom cases, such as exception,
misa write, mstatus write, cpu reset, migration load. So that we can only
recompute xlen in this places and cache it into CPURISCVState.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-6-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When pc is written, it is sign-extended to fill the widest supported XLEN.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-5-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-4-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As pc will be written by the xepc in exception return, just ignore
pc in translation.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-3-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-2-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-18-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector narrowing conversion instructions are provided to and from all
supported integer EEWs for Zve32f extension.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-17-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector widening conversion instructions are provided to and from all
supported integer EEWs for Zve32f extension.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-16-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector single-width floating-point reduction operations for EEW=32 are
supported for Zve32f extension.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-15-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zve32f extension requires the scalar processor to implement the F
extension and implement all vector floating-point instructions for
floating-point operands with EEW=32 (i.e., no widening floating-point
operations).
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-14-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All Zve* extensions support the vector configuration instructions.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-13-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-12-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-11-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector narrowing conversion instructions are provided to and from all
supported integer EEWs for Zve64f extension.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-10-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector widening conversion instructions are provided to and from all
supported integer EEWs for Zve64f extension.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-9-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector single-width floating-point reduction operations for EEW=32 are
supported for Zve64f extension.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-8-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zve64f extension requires the scalar processor to implement the F
extension and implement all vector floating-point instructions for
floating-point operands with EEW=32 (i.e., no widening floating-point
operations).
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-7-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All Zve* extensions support all vector fixed-point arithmetic
instructions, except that vsmul.vv and vsmul.vx are not supported
for EEW=64 in Zve64*.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-6-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All Zve* extensions support all vector integer instructions,
except that the vmulh integer multiply variants that return the
high word of the product (vmulh.vv, vmulh.vx, vmulhu.vv, vmulhu.vx,
vmulhsu.vv, vmulhsu.vx) are not included for EEW=64 in Zve64*.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-5-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All Zve* extensions support all vector load and store instructions,
except Zve64* extensions do not support EEW=64 for index values when
XLEN=32.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-4-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All Zve* extensions support the vector configuration instructions.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-3-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220118014522.13613-2-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add virtual time context description to vmstate_kvmtimer. After cpu being
loaded, virtual time context is updated to KVM.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220112081329.1835-13-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We hope that virtual time adjusts with vm state changing. When a vm
is stopped, guest virtual time should stop counting and kvm_timer
should be stopped. When the vm is resumed, guest virtual time should
continue to count and kvm_timer should be restored.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220112081329.1835-12-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add kvm_riscv_get/put_regs_timer to synchronize virtual time context
from KVM.
To set register of RISCV_TIMER_REG(state) will occur a error from KVM
on kvm_timer_state == 0. It's better to adapt in KVM, but it doesn't matter
that adaping in QEMU.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220112081329.1835-11-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'host' type cpu is set isa to RV32 or RV64 simply, more isa info
will obtain from KVM in kvm_arch_init_vcpu()
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Message-id: 20220112081329.1835-10-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use char-fe to handle console sbi call, which implement early
console io while apply 'earlycon=sbi' into kernel parameters.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220112081329.1835-9-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When KVM is enabled, set the S-mode external interrupt through
kvm_riscv_set_irq function.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Message-id: 20220112081329.1835-8-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Get kernel and fdt start address in virt.c, and pass them to KVM
when cpu reset. Add kvm_riscv.h to place riscv specific interface.
In addition, PLIC is created without M-mode PLIC contexts when KVM
is enabled.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Message-id: 20220112081329.1835-7-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Put GPR CSR and FP registers to kvm by KVM_SET_ONE_REG ioctl
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Message-id: 20220112081329.1835-6-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Get GPR CSR and FP registers from kvm by KVM_GET_ONE_REG ioctl.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Message-id: 20220112081329.1835-5-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Get isa info from kvm while kvm init.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Message-id: 20220112081329.1835-4-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add target/riscv/kvm.c to place kvm_arch_* function needed by
kvm/kvm-all.c.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Message-id: 20220112081329.1835-3-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add basic support for Pointer Authentication when running a KVM
guest and that the host supports it, loosely based on the SVE
support.
Although the feature is enabled by default when the host advertises
it, it is possible to disable it by setting the 'pauth=off' CPU
property. The 'pauth' comment is removed from cpu-features.rst,
as it is now common to both TCG and KVM.
Tested on an Apple M1 running 5.16-rc6.
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220107150154.2490308-1-maz@kernel.org
[PMM: fixed indentation]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's wait to mark the VCPU STOPPED until the possible
STORE STATUS operation is completed, so that we know the
CPU is fully stopped and done doing anything. (When we
also clear the possible sigp_order field for STOP orders.)
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20211213210919.856693-2-farman@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 7448 CPU is an evolution of the PowerPC 7447A and the last of the
G4 family. Change its family to reflect correctly its features. This
fixes Linux boot.
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220117092555.1616512-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Commit c8f49e6b93 ("target/ppc: remove 401/403 CPUs") left a few
things behind.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220117091541.1615807-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220118104150.1899661-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This breaks migration compatibility from (very) old versions of
QEMU. This should not be a problem for the pseries machine for which
migration is only supported on recent QEMUs ( > 2.x). There is no
clear status on what is supported or not for the other machines. Let's
move forward and remove the .load_state_old handler.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118104150.1899661-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
According to PoP, both 32- and 64-bit shifts use lowest 6 address
bits. The current code special-cases 32-bit shifts to use only 5 bits,
which is not correct. For example, shifting by 32 bits currently
preserves the initial value, however, it's supposed zero it out
instead.
Fix by merging sh32 and sh64 and adapting CC calculation to shift
values greater than 31.
Fixes: cbe24bfa91 ("target-s390: Convert SHIFT, ROTATE SINGLE")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220112165016.226996-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
An overflow occurs for SLAG when at least one shifted bit is not equal
to sign bit. Therefore, we need to check that `shift + 1` bits are
neither all 0s nor all 1s. The current code checks only `shift` bits,
missing some overflows.
Fixes: cbe24bfa91 ("target-s390: Convert SHIFT, ROTATE SINGLE")
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220112165016.226996-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
SRDA uses r1_D32 for binding the first operand and s64 for setting CC.
cout_s64() relies on o->out being the shift result, however,
wout_r1_D32() clobbers it.
Fix by using a temporary.
Fixes: a79ba3398a ("target-s390: Convert SHIFT DOUBLE")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220112165016.226996-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
SLDA operates on 64-bit values, so its sign bit index should be 63,
not 31.
Fixes: a79ba3398a ("target-s390: Convert SHIFT DOUBLE")
Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220112165016.226996-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* KVM_GET/SET_SREGS2 support for x86
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHe0v8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPPgQf/Usiph4SA/MjpqwmLP8ZL64ghWzUm
ZjZRRDC12cApBE/P7/TdzHGwx6IiRu2hWt3wVLFWWEpN7xNwoelrhgLZcr8Dl80P
1b2Pe/BHe1xXI+xC/BgK4qt8sxhSvb9hdFwgz2J4mPSgN64d0sXszm/r56rJ/PXq
T2/M/o6wyFexPhYMQcN/ssQIeQzL8uXTifd7GqpcfRM4iivW1KAFVv9zr+SWqE+7
QavIoRTpBiAb7r0EtuxLrPdgiqkx0OKXE93mwrjM0Anci33hdVHLqe8Zs4gmRzyM
sLqArJwG/kdy2fL8Pc3ncPOxKsBgXDIqfucAJ8Tong1hwLJXiyZnJTxMSg==
=Q2aI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* configure and meson cleanups
* KVM_GET/SET_SREGS2 support for x86
# gpg: Signature made Wed 12 Jan 2022 13:09:19 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
meson: reenable filemonitor-inotify compilation
meson: build all modules by default
configure: do not create roms/seabios/config.mak if SeaBIOS not present
tests/tcg: Fix target-specific Makefile variables path for user-mode
KVM: x86: ignore interrupt_bitmap field of KVM_GET/SET_SREGS
KVM: use KVM_{GET|SET}_SREGS2 when supported.
meson: add comments in the target-specific flags section
configure, meson: move config-poison.h to meson
meson: build contrib/ executables after generated headers
configure: move non-command-line variables away from command-line parsing section
configure: parse --enable/--disable-strip automatically, flip default
configure, makefile: remove traces of really old files
configure: do not set bsd_user/linux_user early
configure: simplify creation of plugin symbol list
block/file-posix: Simplify the XFS_IOC_DIOINFO handling
meson: cleanup common-user/ build
user: move common-user includes to a subdirectory of {bsd,linux}-user/
meson: reuse common_user_inc when building files specific to user-mode emulators
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* New SLOF for PPC970 and POWER5+ (Alexey)
* Fixes for POWER5+ pseries (Cedric)
* Updates of documentation (Leonardo and Thomas)
* First step of exception model cleanup (Fabiano)
* User created PHB3/PHB4 devices (Daniel and Cedric)
-----BEGIN PGP SIGNATURE-----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=H+2M
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220112' into staging
ppc 7.0 queue:
* New SLOF for PPC970 and POWER5+ (Alexey)
* Fixes for POWER5+ pseries (Cedric)
* Updates of documentation (Leonardo and Thomas)
* First step of exception model cleanup (Fabiano)
* User created PHB3/PHB4 devices (Daniel and Cedric)
# gpg: Signature made Wed 12 Jan 2022 10:43:21 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-ppc-20220112: (34 commits)
ppc/pnv: use stack->pci_regs[] in pnv_pec_stk_pci_xscom_write()
ppc/pnv: turn pnv_phb4_update_regions() into static
ppc/pnv: Introduce user creatable pnv-phb4 devices
ppc/pnv: turn 'phb' into a pointer in struct PnvPhb4PecStack
ppc/pnv: move PHB4 XSCOM init to phb4_realize()
ppc/pnv: set phb4 properties in stk_realize()
pnv_phb4_pec: use pnv_phb4_pec_get_phb_id() in pnv_pec_dt_xscom()
pnv_phb4_pec.c: move pnv_pec_phb_offset() to pnv_phb4.c
pnv_phb4.c: change TYPE_PNV_PHB4_ROOT_BUS name
pnv_phb3.h: change TYPE_PNV_PHB3_ROOT_BUS name
ppc/pnv: Move num_phbs under Pnv8Chip
ppc/pnv: Complete user created PHB3 devices
ppc/pnv: Reparent user created PHB3 devices to the PnvChip
ppc/pnv: Introduce support for user created PHB3 devices
pnv_phb4.c: check if root port exists in rc_config functions
pnv_phb4.c: make pnv-phb4-root-port user creatable
ppc/pnv: Attach PHB3 root port device when defaults are enabled
pnv_phb4.c: add unique chassis and slot for pnv_phb4_root_port
pnv_phb3.c: add unique chassis and slot for pnv_phb3_root_port
target/ppc: Set the correct endianness for powernv memory dumps
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is unnecessary, because the interrupt would be retrieved and queued
anyway by KVM_GET_VCPU_EVENTS and KVM_SET_VCPU_EVENTS respectively,
and it makes the flow more similar to the one for KVM_GET/SET_SREGS2.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows to make PDPTRs part of the migration
stream and thus not reload them after migration which
is against X86 spec.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211101132300.192584-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We use the endianness of interrupts to determine which endianness to
use for the guest kernel memory dump. For machines that support HILE
(powernv8 and up) we have been always generating big endian dump
files.
This patch uses the HILE support recently added to
ppc_interrupts_little_endian to fix the endianness of the dumps for
powernv machines.
Here are two dumps created at different moments:
$ file skiboot.dump
skiboot.dump: ELF 64-bit MSB core file, 64-bit PowerPC ...
$ file kernel.dump
kernel.dump: ELF 64-bit LSB core file, 64-bit PowerPC ...
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Next patches will split powerpc_excp in multiple family specific
handlers. This patch adds a wrapper to make the transition clearer.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The ppc_interrupts_little_endian function is now suitable for
determining the endianness of interrupts for all CPUs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some CPUs set ILE via an MSR bit. We can make
ppc_interrupts_little_endian handle that case as well. Now we have a
centralized way of determining the endianness of interrupts.
This change has no functional impact.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The ppc_interrupts_little_endian function could be used for interrupts
delivered in Hypervisor mode, so add support for powernv8 and powernv9
to it.
Also drop the comment because it is inaccurate, all CPUs that can run
little endian can have interrupts in little endian. The point is
whether they can take interrupts in an endianness different from
MSR_LE.
This change has no functional impact.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove the compile time definition and make the logging be controlled
by the `-d mmu` option in the cmdline.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v2.03 introduced Floating Round to Integer instructions : frin,
friz, frip, and frim. Add them to POWER5+.
The PPC_FLOAT_EXT flag also includes the fre (Floating Reciprocal
Estimate) instruction which was introduced in ISA v2.0x. The
architecture document says its optional and that might be the reason
why it has been kept under the PPC_FLOAT_EXT flag. This means 970 CPUs
can not use it under QEMU, which doesn't seem to be a problem.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
popcntb instruction was added in ISA v2.02. Add support for POWER5+
processors since they implement ISA v2.03.
PPC970 CPUs implement v2.01 and do not support popcntb.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220105095142.3990430-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Simplify cpu_loop by doing all of the decode in translate.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Simplify cpu_loop by doing all of the decode in translate.
This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16. This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit a9431a03f7 ("target/m68k: add M68K_FEATURE_UNALIGNED_DATA feature") added
a new feature for processors from the 68020 onwards which do not require data
accesses to be word aligned.
Unfortunately the original commit missed an additional case whereby the SP is
still word aligned when setting up an additional format 1 stack frame so add the
necessary M68K_FEATURE_UNALIGNED_DATA feature guard.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: a9431a03f7 ("target/m68k: add M68K_FEATURE_UNALIGNED_DATA feature")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220108180453.18680-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The stval and mtval registers can optionally contain the faulting
instruction on an illegal instruction exception. This patch adds support
for setting the stval and mtval registers.
The RISC-V spec states that "The stval register can optionally also be
used to return the faulting instruction bits on an illegal instruction
exception...". In this case we are always writing the value on an
illegal instruction.
This doesn't match all CPUs (some CPUs won't write the data), but in
QEMU let's just populate the value on illegal instructions. This won't
break any guest software, but will provide more information to guests.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211220064916.107241-4-alistair.francis@opensource.wdc.com
In preparation for adding support for the illegal instruction address
let's fixup the Hypervisor extension setting GVA logic and improve the
variable names.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211220064916.107241-3-alistair.francis@opensource.wdc.com
The csrs are accessed through function pointers: we add 128-bit read
operations in the table for three csrs (writes fallback to the
64-bit version as the upper 64-bit information is handled elsewhere):
- misa, as mxl is needed for proper operation,
- mstatus and sstatus, to return sd
In addition, we also add read and write accesses to the machine and
supervisor scratch registers.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-19-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As opposed to the gen_arith and gen_shift generation helpers, the csr insns
do not have a common prototype, so the choice to generate 32/64 or 128-bit
helper calls is done in the trans_csrxx functions.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-18-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Given the side effects they have, the csr instructions are realized as
helpers. We extend this existing infrastructure for 128-bit sized csr.
We return 128-bit values using the same approach as for div/rem.
Theses helpers all call a unique function that is currently a fallback
on the 64-bit version.
The trans_csrxx functions supporting 128-bit are yet to be implemented.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-17-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Adding the high part of a very minimal set of csr.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-16-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Mult are generated inline (using a cool trick pointed out by Richard), but
for div and rem, given the complexity of the implementation of these
instructions, we call helpers to produce their behavior. From an
implementation standpoint, the helpers return the low part of the results,
while the high part is temporarily stored in a dedicated field of cpu_env
that is used to update the architectural register in the generation wrapper.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-15-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Addition of 128-bit adds and subs in their various sizes,
"set if less than"s and branches.
Refactored the code to have a comparison function used for both stls and
branches.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-14-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Handling shifts for 32, 64 and 128 operation length for RV128, following the
general framework for handling various olens proposed by Richard.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-13-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Adding the 128-bit version of lui and auipc, and introducing to that end
a "set register with immediat" function to handle extension on 128 bits.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-12-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 128-bit bitwise instructions do not need any function prototype change
as the functions can be applied independently on the lower and upper part of
the registers.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-11-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Get function to retrieve the 64 top bits of a register, stored in the gprh
field of the cpu state. Set function that writes the 128-bit value at once.
The access to the gprh field can not be protected at compile time to make
sure it is accessed only in the 128-bit version of the processor because we
have no way to indicate that the misa_mxl_max field is const.
The 128-bit ISA adds ldu, lq and sq. We provide support for these
instructions. Note that (a) we compute only 64-bit addresses to actually
access memory, cowardly utilizing the existing address translation mechanism
of QEMU, and (b) we assume for now little-endian memory accesses.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-10-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
lwu and ld are functionally close to the other loads, but were after the
stores in the source file.
Similarly, xor was away from or and and by two arithmetic functions, while
the immediate versions were nicely put together.
This patch moves the aforementioned loads after lhu, and xor above or,
where they more logically belong.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-9-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds the support of the '-cpu rv128' option to
qemu-system-riscv64 so that we can indicate that we want to run rv128
executables.
Still, there is no support for 128-bit insns at that stage so qemu fails
miserably (as expected) if launched with this option.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-8-frederic.petrot@univ-grenoble-alpes.fr
[ Changed by AF
- Rename CPU to "x-rv128"
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The upper 64-bit of the 128-bit registers have now a place inside
the cpu state structure, and are created as globals for future use.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-7-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Introduction of a gen_logic function for bitwise logic to implement
instructions in which no propagation of information occurs between bits and
use of this function on the bitwise instructions.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-6-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Given that the 128-bit version of the riscv spec adds new instructions, and
that some instructions that were previously only available in 64-bit mode
are now available for both 64-bit and 128-bit, we added new macros to check
for the processor mode during translation.
Although RV128 is a superset of RV64, we keep for now the RV64 only tests
for extensions other than RVI and RVM.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-5-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When commit 0643c12e4b dropped the 'x-' prefix for Zb[abcs] and set
them to be enabled by default, the comment about experimental
extensions was kept in place above them. This moves it down a few
lines to only cover experimental extensions.
References: 0643c12e4b ("target/riscv: Enable bitmanip Zb[abcs] instructions")
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106134020.1628889-1-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vfncvt.f.xu.w, vfncvt.f.x.w convert double-width integer to single-width
floating-point. Therefore, should use require_rvf() to check whether
RVF/RVD is enabled.
vfncvt.f.f.w, vfncvt.rod.f.f.w convert double-width floating-point to
single-width integer. Therefore, should use require_scale_rvf() to check
whether RVF/RVD is enabled.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220105022247.21131-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vfwcvt.xu.f.v, vfwcvt.x.f.v, vfwcvt.rtz.xu.f.v and vfwcvt.rtz.x.f.v
convert single-width floating-point to double-width integer.
Therefore, should use require_rvf() to check whether RVF/RVD is enabled.
vfwcvt.f.xu.v, vfwcvt.f.x.v convert single-width integer to double-width
floating-point, and vfwcvt.f.f.v convert double-width floating-point to
single-width floating-point. Therefore, should use require_scale_rvf() to
check whether RVF/RVD is enabled.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220105022247.21131-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector widening floating-point instructions should use
require_scale_rvf() instead of require_rvf() to check whether RVF/RVD is
enabled.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220105022247.21131-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Let's enable the Hypervisor extension by default. This doesn't affect
named CPUs (such as lowrisc-ibex or sifive-u54) but does enable the
Hypervisor extensions by default for the virt machine.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-7-alistair.francis@opensource.wdc.com>
The Hypervisor spec is now frozen, so remove the experimental tag.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-6-alistair.francis@opensource.wdc.com>
As per the privilege specification, any access from S/U mode should fail
if no pmp region is configured and pmp is present, othwerwise access
should succeed.
Fixes: d102f19a20 (target/riscv/pmp: Raise exception if no PMP entry is configured)
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211214092659.15709-1-nikita.shubin@maquefel.me
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some of the instructions added by the FEAT_TLBIOS extension were forgotten
when the extension was originally added to QEMU.
Fixes: 7113d61850 ("target/arm: Add support for FEAT_TLBIOS")
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211231103928.1455657-1-idan.horowitz@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The first word of page1 is data, so the whole thing
can't be implemented with emulation of addresses.
Use init_guest_commpage for the allocation.
Hijack trap number 16 to implement cmpxchg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211221025012.1057923-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The real kernel has to load the instruction and extract
the imm5 field; for qemu, modify the translator to do this.
The use of R_AT for this in cpu_loop was a bug. Handle
the other trap numbers as per the kernel's trap_table.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211221025012.1057923-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave TARGET_ALIGNED_ONLY set, but use the new CPUState
flag to set MO_UNALN for the instructions that the kernel
handles in the unaligned trap.
The Linux kernel does not handle all memory operations: no
floating-point and no MAC.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211227150127.2659293-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave TARGET_ALIGNED_ONLY set, but use the new CPUState
flag to set MO_UNALN for the instructions that the kernel
handles in the unaligned trap.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211227150127.2659293-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave TARGET_ALIGNED_ONLY set, but use the new CPUState
flag to set MO_UNALN for the instructions that the kernel
handles in the unaligned trap.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211227150127.2659293-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
