* Tianocore is still in an early state for RISCV64 with a lot of work
needed around qemu support.
* u-boot however is working, and can load EFI binaries... so follow the
arm model for now. (EFI via u-boot, or EFI via EFI Bios)
Change-Id: I3dfde25db17b114aedce6faefc58d7556e17a46a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3176
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Remove the InstallerInitScript (it does nothing) and the
InstallerFinishScript (it does too many things). Instead implement the
finishing directly in Installer. Separate writing the bootsector, so
that the "write bootsector" menu writes only the bootsector.
Fixes#16303
This was the last system daemon/server to not have an icon, so I thought I'd give a go at this!
This icon will still need to be added to Haiku's wpa_supplicant repository however.
Change-Id: Icd4e60ec759daaece30669aa8125fce953bbbf95
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2698
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* boot.scr was growing past Jam MAXLINE and was causing segfaults
* Break out to tree, data/boot could be used for other arches
* boot.scr is getting a bit complex, but supports the old
u-boot haiku_loader, as well as u-boot starting our EFI loader.
Change-Id: I93a3167ab0bc78747c1d70fedd08595e9ac89662
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2963
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
...and revert 55109ae144 which changed
"HAIKU logo - black on white - installer.png" to have the stamp
"beta 2".
That one was supposed to only be applied to the r1beta2 branch.
Change-Id: I3287044b61b4e80d39aa07bde02a339d38cfef73
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2883
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This adds support for the 9xxx series of devices.
Change-Id: I43385e91b91201732397b79c38bd9bb4f3a18f1b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2733
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* beta1 -> beta2
* rotate the "beta2" stamp as it was remarked before that the stamp
going 'uphill' is supposed to have better vibes than 'downhill' as
it's now...
Change-Id: I60a60a1ba36ac11817294c91deecc555582e039e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2697
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
They use a new logo since 2006.
While I'm at it, also add logos for Cyrix and Via which were missing
previously (there are a few other missing but they are even more
uncommon). Use vector logos which can be scaled as needed. However, the
CPU chip background is still a bitmap, so we can't scale things just
yet.
Fixes#15919.
* Greek (el) and Korean (ko) no longer made the norm to be included on the image.
* For bg, sl, hr, eo and cs, there were leftovers that should have been removed before.
By default, Haiku does not provide localised names for applications and
preference names. This commit changes the default setting to 'true',
for displaying the localised variants.
This is generally bad UX, especially for the preference preflets,
since the user will have no idea where to go if he/she does not
speak English (even will not be able to find this setting presumably).
Change-Id: I17dea9428541be50e27227ba15f9afcde21a99d6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2002
Reviewed-by: Stephan Aßmus <superstippi@gmx.de>
Reviewed-by: humdinger <humdingerb@gmail.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
The last time I checked, dogs don't have the power of telekinesis. :)
Primarily changed the Tracker icon in all places to have the Tracker
mascot hold the window in its mouth (like in BeOS), rather than the
window just levitating in front of the dog.
Change-Id: Ic60d3b0cb47e5995a639b494bf63af9ca21ef7d7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2408
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Mini-mode is when Deskbar is in the 4 corners with the application
menu tucked away into the leaf menu bar. This commit changes mini-
mode from putting the clock and replicants below the leaf menu to
attaching them to the side forming a single line.
The main advantage of this is that if Deskbar is in the top right
corner you can maximize a window without losing any access to
Deskbar or any screen real-estate. The other three corners lose screen
real-estate similar to horizontal mode.
Replace team icon with HVIF version kindly donated by meanwhile.
Scale icon size according to font size. Grow the vector rendered icon
size by 1px to match bitmap size. Add Team_Registrar icon to
data/artwork/icons. Tweak Team_Registrar icon to match the area of the
bitmap taken up by the bitmap icon so they will render at the same size.
The bitmap can be now NULL if an invalid icon is passed, handle this
case with an fInitStatus member in BarMenuTitle.
Switch order of leaf and team menus on the left side so that the
team menu is always on the screen edge. The team menu is more in
need of quick corner access than the leaf menu in this mode.
Adjust leaf menu position so that it continues to be cut-off while
allowing the team menu icon to display normally. Center vertically in
horizontal mode but it's still cut-off at 16x16. In vertical mode the
leaf continues to be cut-off at all font sizes. Constrain leaf bitmap
to its menu item frame as it can bleed out into the adjacent team menu
item at larger font sizes.
Grow team menu items to fit the widest label up to the max vertical
expando window width (currently 2x min) before truncating.
LegacyPackageInstaller now fits in the team menu. More on
LegacyPackageInstaller in horizontal mode below.
Update SetSizeLimits for mini-mode - no upper limit on height or width.
Switch to mini-mode using 1/4 screen left and right of screen instead
of using 1/6. Mini mode is now wider and this change makes switching
between mini mode and horizontal mode more reliable.
* Rename frame to screenFrame here for clarity.
Set menu bar height to window tab height in vertical mode. This is
so that when you maximize a window the tab size will match. The menu
bar height is also a few pixels taller (25px vs 21px) than it was in
vertical expando mode at the default 12px font size. The change was
made to match the tab height. 21px was the height of a window tab
on BeOS R5's default decorator.
Adjust the width of the team menu for larger icon sizes. If app
names are hidden limit to half of min width so the menu doesn't
appear too short. SetMaxContentSize to width, this fixes a bug where
the menu item wasn't quite the right size for the menu.
No longer truncate time in vertical mini mode because the time can now
expand itself horizontally without limit (within reason.)
Center replicants vertically in mini-mode based on tab height and max
replicant height. Simplify mini-mode menu width and position calculation.
Fix a bar menu bar placement bug when Deskbar starts hidden in mini-mode.
Fix numerous layout issues. Put replicant tray where it should be in all
modes and then start adjusting things. The Replicant tray is now where
it should be in all modes, any fiddling with replicant icon locations
now can be relegated solely to LocationForReplicant().
Implements bug #5876 step 1.
*** Other related Deskbar improvements also made in this commit ***
Implemented underflow in horizontal mode ExpandoMenuBar to make items
wider when you close a team to take up more of available space. Max item
width is currently set to 1.25x min width so that LegacyPackageInstaller
fits in horizontal mode as well. In team menu it make sense to calculate
the widest label but in horizontal mode it would not be very nice if
ARogueAppWithAVeryVeryLongAndAnnoyingName were to grow all of your team
menu items. 1.25x is a fair compromise that gets us some extra width but
not too much. ExpandoMenuBar will truncate items to minimum width to buy
some space before it turns on the scroll arrows. Eliminate
kMinMenuItemWidth, create convinience methods to calculate limits.
Add BarView pointer to TimeView. Ditch fVertical and SetOrientation
in TTimeView and get the information from BarView instead. This way
we don't have to keep the state in sync. Also pass BarView pointer to
TTeamMenu constructor and use it instead of getting the pointer in a
roundabout way from be_app.
Eliminate kMiniHeight constant, the mini-mode height is now based
on the height of a window tab which changes with be_bold_font size.
Limit maximum height of replicants by be_bold_font size as well.
Also limit team menu and leaf menu icon heights by be_bold_font size.
Eliminate TExpandoMenuBar::fVertical, use fBarView instead. Switch the
order of layout and barView in ctor so that barView can be optional.
Change the ctor vertical param to layout and use the passed-in menu_layout
to pass to BMenuBar only. Once TExpandoMenuBar has been constructed, use
fBarView from then on. In Deskbar the menu_layout can change via
BMenuPrivate::SetLayout, if we needed to know TExpandoMenuBar's menu_layout
for some reason, we can call Layout().
Maintain 2px border around replicants in vertical expando mode on all
sides. Maintain 2px border around replicants in horizontal mode, except for
at 16x16 reduce the border to 1px because we're really short on height.
Improve clock centering in vertical expando mode. Also improve clock
centering in mini-mode across all font sizes. Reduce clock height by 2px
so that it won't draw over the top and bottom borders in horizontal mode.
Refactor TBarView::PlaceTray(). The code is basically the same but the
method is now better layed out. Calculate resize dragger location based
on width setting. This is valid since it is only ever used in vertical
expando mode. Hide the resize control better by moving it off-screen
when not in use. Hide() alone was not enough.
Fix size and position of the drag region to prevent minor drawing glitches
that were occuring in horizontal and left vertical mode because the drag
region was not in quite the right size and place.
Call DrawDragger() from DrawAfterChildren() instead of Draw() (and set
B_DRAW_ON_CHILDREN flag) so that the dragger will always be drawn even if
there are other items on top. In theory this should not be needed but in
practice this fixes a few drawing glitches. Rename DrawDragRegion() to
private DrawDragger() method - the name was confusing and other classes
shouldn't be allowed to draw the dragger directly.
TDragRegion should be renamed to TStatusView since that's what it really is.
Then we should create a new TDragControl class based on TResizeControl that
is a child of TStatusView like everybody else. TDragControl would be
responsible for drawing itself and knowing where its bounds are. For now
DrawAfterChildren() will have to do.
Rework status tray border drawing. It is identical in vertical exando mode
and in the same spirit in horizontal mode just a little bit nicer looking.
Draw hilight on top, left, and bottom edges in horizontal mode. Draw hilight
on top, and left edges in mini-mode this creates the appearance of a shadow.
Best appreciated using Magnify.
May the following (Open Tracker License) code forever be memorialized in
this commit message:
void
TDragRegion::Draw(BRect updateRect)
{
rgb_color menuColor = ViewColor();
rgb_color hilite = tint_color(menuColor, B_DARKEN_1_TINT);
rgb_color ldark = tint_color(menuColor, 1.02);
rgb_color dark = tint_color(menuColor, B_DARKEN_2_TINT);
rgb_color vvdark = tint_color(menuColor, B_DARKEN_4_TINT);
rgb_color light = tint_color(menuColor, B_LIGHTEN_2_TINT);
BRect frame(Bounds());
BeginLineArray(4);
if (be_control_look != NULL) {
if (fBarView->Vertical()) {
AddLine(frame.LeftTop(), frame.RightTop(), dark);
AddLine(BPoint(frame.left, frame.top + 1),
BPoint(frame.right, frame.top + 1), ldark);
AddLine(frame.LeftBottom(), frame.RightBottom(), hilite);
} else if (fBarView->AcrossTop() || fBarView->AcrossBottom()) {
AddLine(frame.LeftTop(),
BPoint(frame.left, frame.bottom), dark);
AddLine(BPoint(frame.left + 1, frame.top + 1),
BPoint(frame.right - 1, frame.top + 1), light);
AddLine(BPoint(frame.right, frame.top + 2),
BPoint(frame.right, frame.bottom), hilite);
AddLine(BPoint(frame.left + 1, frame.bottom),
BPoint(frame.right - 1, frame.bottom), hilite);
}
} else {
if (fBarView->Vertical()) {
AddLine(frame.LeftTop(), frame.RightTop(), light);
AddLine(frame.LeftTop(), frame.LeftBottom(), light);
AddLine(frame.RightBottom(), frame.RightTop(), hilite);
} else if (fBarView->AcrossTop()) {
AddLine(BPoint(frame.left, frame.top + 1),
BPoint(frame.right - 1, frame.top + 1), light);
AddLine(frame.RightTop(), frame.RightBottom(), vvdark);
AddLine(BPoint(frame.right - 1, frame.top + 2),
BPoint(frame.right - 1, frame.bottom - 1), hilite);
AddLine(frame.LeftBottom(),
BPoint(frame.right - 1, frame.bottom), hilite);
} else if (fBarView->AcrossBottom()) {
AddLine(BPoint(frame.left, frame.top + 1), BPoint(frame.right - 1, frame.top + 1), light);
AddLine(frame.LeftBottom(), frame.RightBottom(), hilite);
AddLine(frame.RightTop(), frame.RightBottom(), vvdark);
AddLine(BPoint(frame.right - 1, frame.top + 1),
BPoint(frame.right - 1, frame.bottom - 1), hilite);
}
}
EndLineArray();
}
Refactor mode switching.
Change TDragRegion::SwitchModeForRect() to SwitchModeForRegion() and pass
in BRegion's instead of BRect's. Create a new CalculateRegions() method
which is called once at startup and again on ScreenChanged() instead of
calculating the rect's over and over again inside MouseMoved(). Simplify
calculations using BRegion's.
Get the screen_where parameter from the Window()'s CurrentMessage() instead
of converting the passed in where parameter to screen coordinates. This
makes mode switching work 100% better.
Restore full state, fix all issues, and disable it again.
Fix issue with the window not resizing itself correctly when hiding the
scroller arrows in vertical expando mode because Deskbar was using the
bottom value of a scrolled view rather than its height. We only need to
call CheckForScrolling() once before we resize the window. Consolidate all
the window resizing code into ExpandoMenuBar::SizeWindow(), call
CheckForScrolling() there one time, then resize the window and lay
everything out again.
Simplify expando menu bar background drawing. The only part of this
drawing code that was actually being shown was the part where it stroked a
vertical line like this:
rgb_color menuColor = ui_color(B_MENU_BACKGROUND_COLOR);
SetHighColor(tint_color(menuColor, 1.22));
StrokeLine(bounds.LeftTop(), bounds.LeftBottom());
The rest of the code was never seen. May the following code also be forever
memorialized in this commit message:
void
TExpandoMenuBar::DrawBackground(BRect updateRect)
{
if (Vertical())
return;
BRect bounds(Bounds());
rgb_color menuColor = ui_color(B_MENU_BACKGROUND_COLOR);
rgb_color hilite = tint_color(menuColor, B_DARKEN_1_TINT);
rgb_color vlight = tint_color(menuColor, B_LIGHTEN_2_TINT);
int32 count = CountItems() - 1;
if (count >= 0)
bounds.left = ItemAt(count)->Frame().right + 1;
else
bounds.left = 0;
if (be_control_look != NULL) {
SetHighColor(tint_color(menuColor, 1.22));
StrokeLine(bounds.LeftTop(), bounds.LeftBottom());
bounds.left++;
uint32 borders = BControlLook::B_TOP_BORDER
| BControlLook::B_BOTTOM_BORDER | BControlLook::B_RIGHT_BORDER;
be_control_look->DrawButtonBackground(this, bounds, bounds, menuColor,
0, borders);
} else {
SetHighColor(vlight);
StrokeLine(bounds.LeftTop(), bounds.RightTop());
StrokeLine(BPoint(bounds.left, bounds.top + 1), bounds.LeftBottom());
SetHighColor(hilite);
StrokeLine(BPoint(bounds.left + 1, bounds.bottom),
bounds.RightBottom());
}
}
Change-Id: Id9ddd60c997a785184208ba02938bee1416aeae9
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2253
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Change-Id: Idc50cfee16db5f7c0dbea625a7739ad42b2d7bf0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2249
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
For non-official builds, Installer had no logo. This led to a window
sizing bug which is not seen in the official builds (both nightlies and
releases) as they both use the Haiku logo there.
Use Walter as a placeholder logo in that case. The png is generated from
the wonderbrush file in the separate artwork repo.
Change-Id: Iea361d7ac0fd2bdb147318632ff198c86c4b89c2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2180
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Add a link to the Quick Tour to the desktop.
* Remove the Welcome page from desktop. We don't want to clutter
the user's desktop more than necessary. As "Home" page of
WebPositive, it's still very visible.
* Mention the Quick Tour in the Welcome package description.
* Add a "quicktour" script similar to the welcome/userguide
that opens the online version if it's not installed locally.
* Add icons to the userguide and quicktour scripts. Fixes#14706.
* Add bookmark and launcher for the Quick Tour.
Adjust the AddFileDataAttributeRule to create its temporary file in
the "common" architecture, the file is not architecture specific.
Add a rule PrepareScriptWithIcon in src/data/bin/Jamfile to assign
an icon and make the script executable.
Change-Id: Ia7604ff4715a5aaf9a645c1b3333a954d6a4dafc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1924
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This adds the firmware for Intel Dual Band Wireless-AC 3168NGW,
which the driver itself supports, making it possible to use this
device on Haiku.
Change-Id: Id8df2f3128cefb23dd1a5c2919c38945dce7cb94
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1844
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Use 2D icons for mount modes: encrypted, file, readonly, shared
('boot' already uses he 2D Overlay_leaf)
* Use more vibrant colors for used space indicators.
(red = readonly, green = BFS, blue = non-BFS, grey/orange = encrypted)
* Don't have boot/bfs partitions override readonly status (red) with
green. Keep it simple: if anything mounts read-only, show in red.
Change-Id: I4a7c53e1c1d3c6f4be35cbd680b2a7b5e1f9bea3
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1755
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Unless __STRICT_ANSI__ is defined (as it is when running the compiler in
--std=c89 or --std=c99, but not when running it without any specific
args), we can enable these by default and behave like most other
systems. I don't know why no one has done this yet despite suggesting it
multiple times and people prefer to #define _BSD_SOURCE manually
everywhere.
Remove all places in our Jamfiles and sources where it had been defined.
_DEFAULT_SOURCE is now enabled by default for all sources of Haiku, since we
let the compiler use GNU extensions (no strict C standard specified on
command line)
Use _DEFAULT_SOURCE as the define name to match current versions of
glibc. Enable it if _BSD_SOURCE is #defined in compiler flags, for
backward compatibility.
Change-Id: I6db04da5f6db437723cdfba3478f5094a69d7727
Reviewed-on: https://review.haiku-os.org/c/1633
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Use radio buttons laid out vertically so that locales with long labels
(no short word for "write core file") can still look nice. This is open
for experiment, buttons laid out vertically are another option. At least
now we have a window t work from, as BAlert doesn't cut it here.
While I'm at it, use a ladybug icon for this one, so it's visibly
different from normal application alerts.
Change-Id: I08ba9573f132901484224e107404348e7dca97f4
Reviewed-on: https://review.haiku-os.org/c/1459
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Since not everyone likes the default, make it an option in the vesa
settings file. Note setting a mode with the Screen prefs overwrites
the file so it will discard the option.
Also move the code to get_mode_from_settings() since we can't load driver
settings as early as vesa_init().
Change-Id: I93080bd1fbc064dab053624ad37935268b1ed17d
Use launch daemon to autostart Launchbox if enabled in settings.
Change-Id: Id0aaf454cfbc0cc42db2dbb54d6788c79dae6949
Reviewed-on: https://review.haiku-os.org/c/917
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Adds the OpenDocument file types to the mime database
includes regular files and templates.
* Adds icons to mime_db and artwork/icons
Change-Id: I55c7f79f53e09d5976e41c4d5a5292fc6be906d0
Reviewed-on: https://review.haiku-os.org/c/900
Reviewed-by: Stephan Aßmus <superstippi@gmx.de>
This is the correct solution to #11419; I missed in my original commit
that $(NAME) will already be escaped, and adding quotes double-escaped
it erroneously.
Reverts hrev52738, as discussed with waddlesplash on IRC.
Re-opens #11419 "makefile_engine's install function fails on paths with blanks"
Turns out this change results in escaped filenames, e.g. "Open Origin Package"
becomes "Open\ Origin\ Package", see
https://github.com/haikuports/haikuports/pull/3580
* Adds licence information for the NetBSD contributions
* ftp - 4 clause BSD (retained in ftp.c)
* tput - Berkeley
(http://cvsweb.netbsd.org/bsdweb.cgi/src/usr.bin/tput/tput.c?rev=1.26)
* Berkeley licence text added to licences
* xfree86.org url added
These were previously marked TODOs
Change-Id: I01bf0bb6055b3b45ca80c6cddabdb093cb043408
Reviewed-on: https://review.haiku-os.org/c/887
Reviewed-by: Stephan Aßmus <superstippi@gmx.de>