To support FPSR and FPCR bits that don't exist in the AArch32 FPSCR
view of floating point control and status (such as the FEAT_AFP ones),
we need to make sure those bits can be migrated. This commit allows
that, whilst maintaining backwards and forwards migration compatibility
for CPUs where there are no such bits:
On sending:
* If either the FPCR or the FPSR include set bits that are not
visible in the AArch32 FPSCR view of floating point control/status
then we send the FPCR and FPSR as two separate fields in a new
cpu/vfp/fpcr_fpsr subsection, and we send a 0 for the old
FPSCR field in cpu/vfp
* Otherwise, we don't send the fpcr_fpsr subsection, and we send
an FPSCR-format value in cpu/vfp as we did previously
On receiving:
* if we see a non-zero FPSCR field, that is the right information
* if we see a fpcr_fpsr subsection then that has the information
* if we see neither, then FPSCR/FPCR/FPSR are all zero on the source;
cpu_pre_load() ensures the CPU state defaults to that
* if we see both, then the migration source is buggy or malicious;
either the fpcr_fpsr or the FPSCR will "win" depending which
is first in the migration stream; we don't care which that is
We make the new FPCR and FPSR on-the-wire data be 64 bits, because
architecturally these registers are that wide, and this avoids the
need to engage in further migration-compatibility contortions in
future if some new architecture revision defines bits in the high
half of either register.
(We won't ever send the new migration subsection until we add support
for a CPU feature which enables setting overlapping FPCR bits, like
FEAT_AFP.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-5-peter.maydell@linaro.org
Make vfp_set_fpscr() call vfp_set_fpsr() and vfp_set_fpcr()
instead of the other way around.
The masking we do when getting and setting vfp.xregs[ARM_VFP_FPSCR]
is a little awkward, but we are going to change where we store the
underlying FPSR and FPCR information in a later commit, so it will
go away then.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-4-peter.maydell@linaro.org
In AArch32, the floating point control and status bits are all in a
single register, FPSCR. In AArch64, these were split into separate
FPCR and FPSR registers, but the bit layouts remained the same, with
no overlaps, so that you could construct an FPSCR value by ORing FPCR
and FPSR, or equivalently could produce FPSR and FPCR by masking an
FPSCR value. For QEMU's implementation, we opted to use masking to
produce FPSR and FPCR, because we started with an AArch32
implementation of FPSCR.
The addition of the (AArch64-only) FEAT_AFP adds new bits to the FPCR
which overlap with some bits in the FPSR. This means we'll no longer
be able to consider the FPSCR-encoded value as the primary one, but
instead need to treat FPSR/FPCR as the primary encoding and construct
the FPSCR from those. (This remains possible because the FEAT_AFP
bits in FPCR don't appear in the FPSCR.)
As the first step in this refactoring, make vfp_get_fpscr() call
vfp_get_fpcr() and vfp_get_fpsr(), instead of the other way around.
Note that vfp_get_fpcsr_from_host() returns only bits in the FPSR
(for the cumulative fp exception bits), so we can simply rename
it without needing to add a new function for getting FPCR bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-3-peter.maydell@linaro.org
The M-profile FPSCR LTPSIZE is bits [18:16]; this is the same
field as A-profile FPSCR Len, not Stride. Correct the comment
in vfp_get_fpscr().
We also implemented M-profile FPSCR.QC, but forgot to delete
a TODO comment from vfp_set_fpscr(); remove it now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-2-peter.maydell@linaro.org
This commit implements the stubs to handle the qIsAddressTagged,
qMemTag, and QMemTag GDB packets, allowing all GDB 'memory-tag'
subcommands to work with QEMU gdbstub on aarch64 user mode. It also
implements the get/set functions for the special GDB MTE register
'tag_ctl', used to control the MTE fault type at runtime.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20240628050850.536447-11-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-40-alex.bennee@linaro.org>
Make the MTE helpers allocation_tag_mem_probe, load_tag1, and store_tag1
available to other subsystems.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240628050850.536447-6-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-35-alex.bennee@linaro.org>
If page in 'ptr_access' is inaccessible and probe is 'true'
allocation_tag_mem_probe should not throw an exception, but currently it
does, so fix it.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240628050850.536447-5-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-34-alex.bennee@linaro.org>
Enable FEAT_Debugv8p8 for max CPU. This feature is out of scope for QEMU
since it concerns the external debug interface for JTAG, but is
mandatory in Armv8.8 implementations, hence it is reported as supported
in the ID registers.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-4-gustavo.romero@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the initialization of the debug ID registers to aa32_max_features,
which is used to set the 32-bit ID registers. This ensures that the
debug ID registers are consistently set for the max CPU in a single
place.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-3-gustavo.romero@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MLA, MLS, SQDMULH, SQRDMULH, were converted with 8db93dcd3d
and f80701cb44, and this code should have been removed then.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The inner loop, bounded by eltspersegment, must not be
larger than the outer loop, bounded by elements.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is an experiment to further reduce the amount we throw into the
exec headers. It might not be as useful as I initially thought because
just under half of the users also need gdbserver_start().
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240620152220.2192768-3-alex.bennee@linaro.org>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1,
resulting in painful developper experience. Use snprintf() instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240411104340.6617-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
FEAT_WFxT introduces new instructions WFIT and WFET, which are like
the existing WFI and WFE but allow the guest to pass a timeout value
in a register. The instructions will wait for an interrupt/event as
usual, but will also stop waiting when the value of CNTVCT_EL0 is
greater than or equal to the specified timeout value.
We implement WFIT by setting up a timer to expire at the right
point; when the timer expires it sets the EXITTB interrupt, which
will cause the CPU to leave the halted state. If we come out of
halt for some other reason, we unset the pending timer.
We implement WFET as a nop, which is architecturally permitted and
matches the way we currently make WFE a nop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-3-peter.maydell@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the only instructions in the 3 source scalar class.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within disas_simd_three_reg_same
and disas_simd_scalar_three_reg_same, so remove them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already have a gvec helper for the operations, but we aren't
using it on the aa32 neon side. Create a unified expander for
use by both aa32 and aa64 translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are faux 2-operand instructions, reading from rd.
Sort them next to the other three-operand same insns for clarity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This eliminates the last uses of these neon helpers.
Incorporate the MO_64 expanders as an option to the vector expander.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This eliminates the last uses of these neon helpers.
Incorporate the MO_64 expanders as an option to the vector expander.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No need for a full comparison; xor produces non-zero bits
for QC just fine.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes AND, ORR, EOR, BIC, ORN, BSF, BIT, BIF.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within handle_simd_3same_pair
so remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within disas_simd_three_reg_same_fp16,
so remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within handle_3same_float
and disas_simd_scalar_three_reg_same_fp16 so remove them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the last instruction within disas_fp_2src,
so remove that and its subroutines.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Load and zero-extend float16 into a TCGv_i32 before
all scalar operations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert all forms (scalar, vector, scalar indexed, vector indexed),
which allows us to remove switch table entries elsewhere.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split some routines out of translate-a64.c and translate-sve.c
that are used by both.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All of these insns have "if sz == '1' then UNDEFINED" in their pseudocode.
Fixes a RISU miscompare for invalid insn 0x5ef0c87a.
Fixes: 5c36d89567 ("arm/translate-a64: add all FP16 ops in simd_scalar_pairwise")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The decode of FMOV (vector, immediate, half-precision) vs
invalid cases of MOVI are incorrect.
Fixes RISU mismatch for invalid insn 0x2f01fd31.
Fixes: 70b4e6a445 ("arm/translate-a64: add FP16 FMOV to simd_mod_imm")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a bug in that neither PLI nor PLDW are present in ARMv6T2,
but are introduced with ARMv7 and ARMv7MP respectively.
For clarity, do not use NOP for PLD.
Note that there is no PLDW (literal). Architecturally in the
T1 encoding of "PLD (literal)" bit 5 is "(0)", which means
that it should be zero and if it is not then the behaviour
is CONSTRAINED UNPREDICTABLE (might UNDEF, NOP, or ignore the
value of the bit).
In our implementation we have patterns for both:
+ PLD 1111 1000 -001 1111 1111 ------------ # (literal)
+ PLD 1111 1000 -011 1111 1111 ------------ # (literal)
and so we effectively ignore the value of bit 5. (This is a
permitted option for this CONSTRAINED UNPREDICTABLE.) This isn't a
behaviour change in this commit, since we previously had NOP lines
for both those patterns.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240524232121.284515-3-richard.henderson@linaro.org
[PMM: adjusted commit message to note that PLD (lit) T1 bit 5
being 1 is an UNPREDICTABLE case.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We wrongly encoded ID_AA64PFR1_EL1 using {3,0,0,4,2} in hvf_sreg_match[] so
we fail to get the expected ARMCPRegInfo from cp_regs hash table with the
wrong key.
Fix it with the correct encoding {3,0,0,4,1}. With that fixed, the Linux
guest can properly detect FEAT_SSBS2 on my M1 HW.
All DBG{B,W}{V,C}R_EL1 registers are also wrongly encoded with op0 == 14.
It happens to work because HVF_SYSREG(CRn, CRm, 14, op1, op2) equals to
HVF_SYSREG(CRn, CRm, 2, op1, op2), by definition. But we shouldn't rely on
it.
Cc: qemu-stable@nongnu.org
Fixes: a1477da3dd ("hvf: Add Apple Silicon support")
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20240503153453.54389-1-zenghui.yu@linux.dev
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Almost all of the disas_log implementations are identical.
Unify them within translator_loop.
Drop extra Priv/Virt logging from target/riscv.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that boards are enabled by default and the "CONFIG_FOO=y"
entries are gone from configs/devices/, there cannot be any more
a conflicts between the default contents of configs/devices/
and a failed "depends on" clause.
With this change, each individual board or target can express
whether it needs FDT. It can then include the common code in the
build via "select DEVICE_TREE", which will also as tell meson to link
with libfdt.
This allows building non-microvm x86 emulators without having
libfdt available.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Extract page-protection definitions to page-protection.h
- Rework in accel/tcg in preparation of extracting TCG fields from CPUState
- More uses of get_task_state() in user emulation
- Xen refactors in preparation for adding multiple map caches (Juergen & Edgar)
- MAINTAINERS updates (Aleksandar and Bin)
-----BEGIN PGP SIGNATURE-----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=3Qkg
-----END PGP SIGNATURE-----
Merge tag 'accel-20240506' of https://github.com/philmd/qemu into staging
Accelerator patches
- Extract page-protection definitions to page-protection.h
- Rework in accel/tcg in preparation of extracting TCG fields from CPUState
- More uses of get_task_state() in user emulation
- Xen refactors in preparation for adding multiple map caches (Juergen & Edgar)
- MAINTAINERS updates (Aleksandar and Bin)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmY40CAACgkQ4+MsLN6t
# wN5drxAA1oIsuUzpAJmlMIxZwlzbICiuexgn/HH9DwWNlrarKo7V1l4YB8jd9WOg
# IKuj7c39kJKsDEB8BXApYwcly+l7DYdnAAI8Z7a+eN+ffKNl/0XBaLjsGf58RNwY
# fb39/cXWI9ZxKxsHMSyjpiu68gOGvZ5JJqa30Fr+eOGuug9Fn/fOe1zC6l/dMagy
# Dnym72stpD+hcsN5sVwohTBIk+7g9og1O/ctRx6Q3ZCOPz4p0+JNf8VUu43/reaR
# 294yRK++JrSMhOVFRzP+FH1G25NxiOrVCFXZsUTYU+qPDtdiKtjH1keI/sk7rwZ7
# U573lesl7ewQFf1PvMdaVf0TrQyOe6kUGr9Mn2k8+KgjYRAjTAQk8V4Ric/+xXSU
# 0rd7Cz7lyQ8jm0DoOElROv+lTDQs4dvm3BopF3Bojo4xHLHd3SFhROVPG4tvGQ3H
# 72Q5UPR2Jr2QZKiImvPceUOg0z5XxoN6KRUkSEpMFOiTRkbwnrH59z/qPijUpe6v
# 8l5IlI9GjwkL7pcRensp1VC6e9KC7F5Od1J/2RLDw3UQllMQXqVw2bxD3CEtDRJL
# QSZoS4d1jUCW4iAYdqh/8+2cOIPiCJ4ai5u7lSdjrIJkRErm32FV/pQLZauoHlT5
# eTPUgzDoRXVgI1X1slTpVXlEEvRNbhZqSkYLkXr80MLn5hTafo0=
# =3Qkg
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 May 2024 05:42:08 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'accel-20240506' of https://github.com/philmd/qemu: (28 commits)
MAINTAINERS: Update my email address
MAINTAINERS: Update Aleksandar Rikalo email
system: Pass RAM MemoryRegion and is_write in xen_map_cache()
xen: mapcache: Break out xen_map_cache_init_single()
xen: mapcache: Break out xen_invalidate_map_cache_single()
xen: mapcache: Refactor xen_invalidate_map_cache_entry_unlocked
xen: mapcache: Refactor xen_replace_cache_entry_unlocked
xen: mapcache: Break out xen_ram_addr_from_mapcache_single
xen: mapcache: Refactor xen_remap_bucket for multi-instance
xen: mapcache: Refactor xen_map_cache for multi-instance
xen: mapcache: Refactor lock functions for multi-instance
xen: let xen_ram_addr_from_mapcache() return -1 in case of not found entry
system: let qemu_map_ram_ptr() use qemu_ram_ptr_length()
user: Use get_task_state() helper
user: Declare get_task_state() once in 'accel/tcg/vcpu-state.h'
user: Forward declare TaskState type definition
accel/tcg: Move @plugin_mem_cbs from CPUState to CPUNegativeOffsetState
accel/tcg: Restrict cpu_plugin_mem_cbs_enabled() to TCG
accel/tcg: Restrict qemu_plugin_vcpu_exit_hook() to TCG plugins
accel/tcg: Update CPUNegativeOffsetState::can_do_io field documentation
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extract page-protection definitions from "exec/cpu-all.h"
to "exec/page-protection.h".
The list of files requiring the new header was generated
using:
$ git grep -wE \
'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240427155714.53669-3-philmd@linaro.org>
KVM code might have to call functions on the PCIDevice that is
passed to kvm_arch_fixup_msi_route(). This fails in the case
where --without-default-devices is used and no board is
configured. While this is not really a useful configuration,
and therefore setting up stubs for CONFIG_PCI is overkill,
failing the build is impolite. Just include the PCI
subsystem if kvm_arch_fixup_msi_route() requires it, as
is the case for ARM and x86.
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In previous versions of the Arm architecture, the frequency of the
generic timers as reported in CNTFRQ_EL0 could be any IMPDEF value,
and for QEMU we picked 62.5MHz, giving a timer tick period of 16ns.
In Armv8.6, the architecture standardized this frequency to 1GHz.
Because there is no ID register feature field that indicates whether
a CPU is v8.6 or that it ought to have this counter frequency, we
implement this by changing our default CNTFRQ value for all CPUs,
with exceptions for backwards compatibility:
* CPU types which we already implement will retain the old
default value. None of these are v8.6 CPUs, so this is
architecturally OK.
* CPUs used in versioned machine types with a version of 9.0
or earlier will retain the old default value.
The upshot is that the only CPU type that changes is 'max'; but any
new type we add in future (whether v8.6 or not) will also get the new
1GHz default.
It remains the case that the machine model can override the default
value via the 'cntfrq' QOM property (regardless of the CPU type).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240426122913.3427983-5-peter.maydell@linaro.org
The generic timer frequency is settable by board code via a QOM
property "cntfrq", but otherwise defaults to 62.5MHz. The way this
is done includes some complication resulting from how this was
originally a fixed value with no QOM property. Clean it up:
* always set cpu->gt_cntfrq_hz to some sensible value, whether
the CPU has the generic timer or not, and whether it's system
or user-only emulation
* this means we can always use gt_cntfrq_hz, and never need
the old GTIMER_SCALE define
* set the default value in exactly one place, in the realize fn
The aim here is to pave the way for handling the ARMv8.6 requirement
that the generic timer frequency is always 1GHz. We're going to do
that by having old CPU types keep their legacy-in-QEMU behaviour and
having the default for any new CPU types be a 1GHz rather han 62.5MHz
cntfrq, so we want the point where the default is decided to be in
one place, and in code, not in a DEFINE_PROP_UINT64() initializer.
This commit should have no behavioural changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240426122913.3427983-2-peter.maydell@linaro.org
FEAT_Spec_FPACC is a feature describing speculative behaviour in the
event of a PAC authontication failure when FEAT_FPACCOMBINE is
implemented. FEAT_Spec_FPACC means that the speculative use of
pointers processed by a PAC Authentication is not materially
different in terms of the impact on cached microarchitectural state
(caches, TLBs, etc) between passing and failing of the PAC
Authentication.
QEMU doesn't do speculative execution, so we can advertise
this feature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-6-peter.maydell@linaro.org
Newer versions of the Arm ARM (e.g. rev K.a) now define fields for
ID_AA64MMFR3_EL1. Implement this register, so that we can set the
fields if we need to. There's no behaviour change here since we
don't currently set the register value to non-zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-5-peter.maydell@linaro.org
FEAT_ETS2 is a tighter set of guarantees about memory ordering
involving translation table walks than the old FEAT_ETS; FEAT_ETS has
been retired from the Arm ARM and the old ID_AA64MMFR1.ETS == 1
now gives no greater guarantees than ETS == 0.
FEAT_ETS2 requires:
* the virtual address of a load or store that appears in program
order after a DSB cannot be translated until after the DSB
completes (section B2.10.9)
* TLB maintenance operations that only affect translations without
execute permission are guaranteed complete after a DSB
(R_BLDZX)
* if a memory access RW2 is ordered-before memory access RW2,
then RW1 is also ordered-before any translation table walk
generated by RW2 that generates a Translation, Address size
or Access flag fault (R_NNFPF, I_CLGHP)
As with FEAT_ETS, QEMU is already compliant, because we do not
reorder translation table walk memory accesses relative to other
memory accesses, and we always guarantee to have finished TLB
maintenance as soon as the TLB op is done.
Update the documentation to list FEAT_ETS2 instead of the
no-longer-existent FEAT_ETS, and update the 'max' CPU ID registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-4-peter.maydell@linaro.org
FEAT_CSV2_3 adds a mechanism to identify if hardware cannot disclose
information about whether branch targets and branch history trained
in one hardware described context can control speculative execution
in a different hardware context.
There is no branch prediction in TCG, so we don't need to do anything
to be compliant with this. Upadte the '-cpu max' ID registers to
advertise the feature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-3-peter.maydell@linaro.org
For cpus using PMSA, when the MPU is disabled, the default memory
type is Normal, Non-cachable. This means that it should not
have alignment restrictions enforced.
Cc: qemu-stable@nongnu.org
Fixes: 59754f85ed ("target/arm: Do memory type alignment check when translation disabled")
Reported-by: Clément Chigot <chigot@adacore.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Clément Chigot <chigot@adacore.com>
Message-id: 20240422170722.117409-1-richard.henderson@linaro.org
[PMM: trivial comment, commit message tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As it had never been used since the first commit a1477da3dd ("hvf: Add
Apple Silicon support").
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Message-id: 20240422092715.71973-1-zenghui.yu@linux.dev
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPUBreakpoint and CPUWatchpoint structures are declared
in "hw/core/cpu.h", which contains declarations related to
CPUState and CPUClass. Some source files only require the
BP/WP definitions and don't need to pull in all CPU* API.
In order to simplify, create a new "exec/breakpoint.h" header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240418192525.97451-3-philmd@linaro.org>
HVF has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-4-philmd@linaro.org>
accel/tcg/ files requires the following definitions:
- TARGET_LONG_BITS
- TARGET_PAGE_BITS
- TARGET_PHYS_ADDR_SPACE_BITS
- TCG_GUEST_DEFAULT_MO
The first 3 are defined in "cpu-param.h". The last one
in "cpu.h", with a bunch of definitions irrelevant for
TCG. By moving the TCG_GUEST_DEFAULT_MO definition to
"cpu-param.h", we can simplify various accel/tcg includes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20231211212003.21686-4-philmd@linaro.org>
'NEED_CPU_H' guard target-specific code; it is defined by meson
altogether with the 'CONFIG_TARGET' definition. Rename NEED_CPU_H
as COMPILING_PER_TARGET to clarify its meaning.
Mechanical change running:
$ sed -i s/NEED_CPU_H/COMPILING_PER_TARGET/g $(git grep -l NEED_CPU_H)
then manually add a /* COMPILING_PER_TARGET */ comment
after the '#endif' when the block is large.
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240322161439.6448-4-philmd@linaro.org>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
Enable FEAT_NMI on the 'max' CPU.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-24-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt
with superpriority is always IRQ, never FIQ, so the NMI exception trap entry
behave like IRQ. And VINMI(vIRQ with Superpriority) can be raised from the
GIC or come from the hcrx_el2.HCRX_VINMI bit, VFNMI(vFIQ with Superpriority)
come from the hcrx_el2.HCRX_VFNMI bit.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-13-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set or clear PSTATE.ALLINT on taking an exception to ELx according to the
SCTLR_ELx.SPINTMASK bit.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-10-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add IS and FS bit in ISR_EL1 and handle the read. With CPU_INTERRUPT_NMI or
CPU_INTERRUPT_VINMI, both CPSR_I and ISR_IS must be set. With
CPU_INTERRUPT_VFNMI, both CPSR_F and ISR_FS must be set.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-9-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt
with superpriority is always IRQ, never FIQ, so handle NMI same as IRQ in
arm_phys_excp_target_el().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-8-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This only implements the external delivery method via the GICv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-7-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add ALLINT MSR (immediate) to decodetree, in which the CRm is 0b000x. The
EL0 check is necessary to ALLINT, and the EL1 check is necessary when
imm == 1. So implement it inline for EL2/3, or EL1 with imm==0. Avoid the
unconditional write to pc and use raise_exception_ra to unwind.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-5-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for FEAT_NMI. NMI (FEAT_NMI) is an mandatory feature in
ARMv8.8-A and ARM v9.3-A.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-4-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When PSTATE.ALLINT is set, an IRQ or FIQ interrupt that is targeted to
ELx, with or without superpriority is masked. As Richard suggested, place
ALLINT bit in PSTATE in env->pstate.
In the pseudocode, AArch64.ExceptionReturn() calls SetPSTATEFromPSR(), which
treats PSTATE.ALLINT as one of the bits which are reinstated from SPSR to
PSTATE regardless of whether this is an illegal exception return or not. So
handle PSTATE.ALLINT the same way as PSTATE.DAIF in the illegal_return exit
path of the exception_return helper. With the change, exception entry and
return are automatically handled.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-3-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FEAT_NMI defines another three new bits in HCRX_EL2: TALLINT, HCRX_VINMI and
HCRX_VFNMI. When the feature is enabled, allow these bits to be written in
HCRX_EL2.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-2-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Board reset requires writing a fresh CPU state. As far as KVM is
concerned, the only thing that blocks reset is that CPU state is
encrypted; therefore, kvm_cpus_are_resettable() can simply check
if that is the case.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To keep the multiple update check, replace insn_start
with insn_start_updated.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When we do an AT address translation operation, the page table walk
is supposed to be performed in the context of the EL we're doing the
walk for, so for instance an AT S1E2R walk is done for EL2. In the
pseudocode an EL is passed to AArch64.AT(), which calls
SecurityStateAtEL() to find the security state that we should be
doing the walk with.
In ats_write64() we get this wrong, instead using the current
security space always. This is fine for AT operations performed from
EL1 and EL2, because there the current security state and the
security state for the lower EL are the same. But for AT operations
performed from EL3, the current security state is always either
Secure or Root, whereas we want to use the security state defined by
SCR_EL3.{NS,NSE} for the walk. This affects not just guests using
FEAT_RME but also ones where EL3 is Secure state and the EL3 code
is trying to do an AT for a NonSecure EL2 or EL1.
Use arm_security_space_below_el3() to get the SecuritySpace to
pass to do_ats_write() for all AT operations except the
AT S1E3* operations.
Cc: qemu-stable@nongnu.org
Fixes: e1ee56ec23 ("target/arm: Pass security space rather than flag for AT instructions")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2250
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240405180232.3570066-1-peter.maydell@linaro.org
EL2 accesses to CNTPOFF_EL2 should only ever trap to EL3 if EL3 is
present, as described by the reference manual (for MRS):
/* ... */
elsif PSTATE.EL == EL2 then
if Halted() && HaveEL(EL3) && /*...*/ then
UNDEFINED;
elsif HaveEL(EL3) && SCR_EL3.ECVEn == '0' then
/* ... */
else
X[t, 64] = CNTPOFF_EL2;
However, the existing implementation of gt_cntpoff_access() always
returns CP_ACCESS_TRAP_EL3 for EL2 accesses with SCR_EL3.ECVEn unset. In
pseudo-code terminology, this corresponds to assuming that HaveEL(EL3)
is always true, which is wrong. As a result, QEMU panics in
access_check_cp_reg() when started without EL3 and running EL2 code
accessing the register (e.g. any recent KVM booting a guest).
Therefore, add the HaveEL(EL3) check to gt_cntpoff_access().
Fixes: 2808d3b38a ("target/arm: Implement FEAT_ECV CNTPOFF_EL2 handling")
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Message-id: m3al6amhdkmsiy2f62w72ufth6dzn45xg5cz6xljceyibphnf4@ezmmpwk4tnhl
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
See previous commit and commit 9de9fa5cf2 ("Avoid using inlined
functions with external linkage") for rationale.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240313184954.42513-3-philmd@linaro.org>
The HSTR_EL2 register allows the hypervisor to trap AArch32 EL1 and
EL0 accesses to cp15 registers. We incorrectly implemented this so
they trap to EL1 when we detect the need for a HSTR trap at code
generation time. (The check in access_check_cp_reg() which we do at
runtime to catch traps from EL0 is correctly routing them to EL2.)
Use the correct target EL when generating the code to take the trap.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2226
Fixes: 049edada5e ("target/arm: Make HSTR_EL2 traps take priority over UNDEF-at-EL1")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240325133116.2075362-1-peter.maydell@linaro.org
query-cpu-model-comparison, query-cpu-model-baseline, and
query-cpu-model-expansion take CpuModelInfo arguments. Errors in
@props members of these arguments are reported for 'props', without
further context. For instance, s390x rejects
{"execute": "query-cpu-model-comparison", "arguments": {"modela": {"name": "z13", "props": {}}, "modelb": {"name": "z14", "props": []}}}
with
{"error": {"class": "GenericError", "desc": "Invalid parameter type for 'props', expected: object"}}
This is unusual; the common QAPI unmarshaling machinery would complain
about 'modelb.props'. Our hand-written code to visit the @props
member neglects to provide the context.
Tweak it so it provides it. The command above now fails with
{"error": {"class": "GenericError", "desc": "Invalid parameter type for 'modelb.props', expected: dict"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240305145919.2186971-4-armbru@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
CpuModelInfo member @props is semantically a mapping from name to
value, and syntactically a JSON object on the wire. This translates
to QDict in C. Since the QAPI schema language lacks the means to
express 'object', we use 'any' instead. This is QObject in C.
Commands taking a CpuModelInfo argument need to check the QObject is a
QDict.
For arm, riscv, and s390x, the code checks right before passing the
QObject to visit_start_struct(). visit_start_struct() then checks
again.
Delete the first check.
The error message for @props that are not an object changes slightly
to the the message we get for this kind of type error in other
contexts. Minor improvement.
Additionally, error messages about members of @props now refer to
'props.prop-name' instead of just 'prop-name'. Another minor
improvement.
Both changes are visible in tests/qtest/arm-cpu-features.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240305145919.2186971-2-armbru@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[Drop #include now superfluous]
Since CPU() macro is a simple cast, the following are equivalent:
Object *obj;
CPUState *cs = CPU(obj)
In order to ease static analysis when running
scripts/coccinelle/cpu_env.cocci from the previous commit,
replace:
- CPU_GET_CLASS(cpu);
+ CPU_GET_CLASS(obj);
Most code use the 'cs' variable name for CPUState handle.
Replace few 's' -> 'cs' to unify cpu_reset_hold() style.
No logical change in this patch.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a variable is initialized to &struct->field, use it
in place. Rationale: while this makes the code more concise,
this also helps static analyzers.
Mechanical change using the following Coccinelle spatch script:
@@
type S, F;
identifier s, m, v;
@@
S *s;
...
F *v = &s->m;
<+...
- &s->m
+ v
...+>
Inspired-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-2-philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[thuth: Dropped hunks that need a rebase, and fixed sizeof() in pmu_realize()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move the code to a separate file so that we do not have to compile
it anymore if CONFIG_ARM_V7M is not set.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240308141051.536599-2-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the 8-bit input elements are sequential in the input vector,
the 32-bit output elements are not sequential in the output matrix.
Do not attempt to compute 2 32-bit outputs at the same time.
Cc: qemu-stable@nongnu.org
Fixes: 23a5e3859f ("target/arm: Implement SME integer outer product")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2083
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240305163931.242795-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable all FEAT_ECV features on the 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-9-peter.maydell@linaro.org
When ID_AA64MMFR0_EL1.ECV is 0b0010, a new register CNTPOFF_EL2 is
implemented. This is similar to the existing CNTVOFF_EL2, except
that it controls a hypervisor-adjustable offset made to the physical
counter and timer.
Implement the handling for this register, which includes control/trap
bits in SCR_EL3 and CNTHCTL_EL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-8-peter.maydell@linaro.org
For FEAT_ECV, new registers CNTPCTSS_EL0 and CNTVCTSS_EL0 are
defined, which are "self-synchronized" views of the physical and
virtual counts as seen in the CNTPCT_EL0 and CNTVCT_EL0 registers
(meaning that no barriers are needed around accesses to them to
ensure that reads of them do not occur speculatively and out-of-order
with other instructions).
For QEMU, all our system registers are self-synchronized, so we can
simply copy the existing implementation of CNTPCT_EL0 and CNTVCT_EL0
to the new register encodings.
This means we now implement all the functionality required for
ID_AA64MMFR0_EL1.ECV == 0b0001.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-7-peter.maydell@linaro.org
The functionality defined by ID_AA64MMFR0_EL1.ECV == 1 is:
* four new trap bits for various counter and timer registers
* the CNTHCTL_EL2.EVNTIS and CNTKCTL_EL1.EVNTIS bits which control
scaling of the event stream. This is a no-op for us, because we don't
implement the event stream (our WFE is a NOP): all we need to do is
allow CNTHCTL_EL2.ENVTIS to be read and written.
* extensions to PMSCR_EL1.PCT, PMSCR_EL2.PCT, TRFCR_EL1.TS and
TRFCR_EL2.TS: these are all no-ops for us, because we don't implement
FEAT_SPE or FEAT_TRF.
* new registers CNTPCTSS_EL0 and NCTVCTSS_EL0 which are
"self-sychronizing" views of the CNTPCT_EL0 and CNTVCT_EL0, meaning
that no barriers are needed around their accesses. For us these
are just the same as the normal views, because all our sysregs are
inherently self-sychronizing.
In this commit we implement the trap handling and permit the new
CNTHCTL_EL2 bits to be written.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-6-peter.maydell@linaro.org
Don't allow the guest to write CNTHCTL_EL2 bits which don't exist.
This is not strictly architecturally required, but it is how we've
tended to implement registers more recently.
In particular, bits [19:18] are only present with FEAT_RME,
and bits [17:12] will only be present with FEAT_ECV.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-5-peter.maydell@linaro.org
We prefer the FIELD macro over ad-hoc #defines for register bits;
switch CNTHCTL to that style before we add any more bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-4-peter.maydell@linaro.org
The timer _EL02 registers should UNDEF for invalid accesses from EL2
or EL3 when HCR_EL2.E2H == 0, not take a cp access trap. We were
delivering the exception to EL2 with the wrong syndrome.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-3-peter.maydell@linaro.org
cpu.h has a lot of #defines relating to CPU register fields.
Most of these aren't actually used outside target/arm code,
so there's no point in cluttering up the cpu.h file with them.
Move some easy ones to internals.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-2-peter.maydell@linaro.org
If translation is enabled, and the PTE memory type is Device,
enable checking alignment via TLB_CHECK_ALIGNMENT. While the
check is done later than it should be per the ARM, it's better
than not performing the check at all.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-7-richard.henderson@linaro.org
[PMM: tweaks to comment text]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
If translation is disabled, the default memory type is Device, which
requires alignment checking. This is more optimally done early via
the MemOp given to the TCG memory operation.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reported-by: Idan Horowitz <idan.horowitz@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-6-richard.henderson@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1204
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have removed TARGET_PAGE_BITS_MIN-6 from
TLB_FLAGS_MASK, we can test for 32-byte alignment.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since aarch64 binaries are generally built for multiple
page sizes, it is trivial to allow the page size to vary.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-31-richard.henderson@linaro.org>
This function is no longer used.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231213-gdb-v17-9-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-14-alex.bennee@linaro.org>
