We currently only support GICv2 emulation. To also support GICv3, we will
need to pass a few system registers into their respective handler functions.
This patch adds support for HVF to call into the TCG callbacks for GICv3
system register handlers. This is safe because the GICv3 TCG code is generic
as long as we limit ourselves to EL0 and EL1 - which are the only modes
supported by HVF.
To make sure nobody trips over that, we also annotate callbacks that don't
work in HVF mode, such as EL state change hooks.
With GICv3 support in place, we can run with more than 8 vCPUs.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20230128224459.70676-1-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In linux-user mode, 'bkpt' generates an EXP_DEBUG exception to allow
QEMU gdb server to intercept and manage the operation with an external
debugger.
In softmmu mode, the instruction must generate an illegal instruction
exception as it is on real hardware to be managed by the kernel.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1462
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230126125234.3186042-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The HAXM project has been retired (see https://github.com/intel/haxm#status),
so we should mark the code in QEMU as deprecated (and finally remove it
unless somebody else picks the project up again - which is quite unlikely
since there are now whpx and hvf on these operating systems, too).
Message-Id: <20230126121034.1035138-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Print both the raw field and the resolved pc-relative
address, as we do for branches.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While jirl shares the same instruction format as bne etc,
it is not assembled the same. In particular, rd is printed
first not second and the immediate is not pc-relative.
Decode into the arg_rr_i structure, which prints correctly.
This changes the "offs" member to "imm", to update translate.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reuse the decodetree based disassembler from
target/loongarch/ for tcg/loongarch64/.
The generation of decode-insns.c.inc into ./libcommon.fa.p/ could
eventually result in conflict, if any other host requires the same
trick, but this is good enough for now.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not encode the pointer as a constant in the opcode stream.
This pointer is specific to the cpu that first generated the
translation, which runs into problems with both hot-pluggable
cpus and user-only threads, as cpus are removed. It's also a
potential correctness issue in the theoretical case of a
slightly-heterogenous system, because if CPU 0 generates a
TB and then CPU 1 executes it, CPU 1 will end up using CPU 0's
hash table, which might have a wrong set of registers in it.
(All our current systems are either completely homogenous,
M-profile, or have CPUs sufficiently different that they
wouldn't be sharing TBs anyway because the differences would
show up in the TB flags, so the correctness issue is only
theoretical, not practical.)
Perform the lookup in either helper_access_check_cp_reg,
or a new helper_lookup_cp_reg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230106194451.1213153-3-richard.henderson@linaro.org
[PMM: added note in commit message about correctness issue]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the ri == NULL case to the top of the function and return.
This allows the else to be removed and the code unindented.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230106194451.1213153-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Qemu doesn't implement Debug Communication Channel, as well as the rest
of external debug interface. However, Microsoft Hyper-V in tries to
access some of those registers during an EL2 context switch.
Since there is no architectural way to not advertise support for external
debug, provide RAZ/WI stubs for OSDTRRX_EL1, OSDTRTX_EL1 and OSECCR_EL1
registers in the same way the rest of DCM is currently done. Do account
for access traps though with access_tda.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230120155929.32384-3-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The architecture does not define any functionality for the CLAIM tag bits.
So we will just keep the raw bits, as per spec.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230120155929.32384-2-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In v7m_exception_taken(), for v8M we set the EXC_RETURN.ES bit if
either the exception targets Secure or if the CPU doesn't implement
the Security Extension. This is incorrect: the v8M Arm ARM specifies
that the ES bit should be RES0 if the Security Extension is not
implemented, and the pseudocode agrees.
Remove the incorrect condition, so that we leave the ES bit 0
if the Security Extension isn't implemented.
This doesn't have any guest-visible effects for our current set of
emulated CPUs, because all our v8M CPUs implement the Security
Extension; but it's worth fixing in case we add a v8M CPU without
the extension in future.
Reported-by: Igor Kotrasinski <i.kotrasinsk@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Unify the two helper_set_pstate_{sm,za} in this function.
Do not call helper_* functions from svcr_write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230112102436.1913-8-philmd@linaro.org
Message-Id: <20230112004322.161330-1-richard.henderson@linaro.org>
[PMD: Split patch in multiple tiny steps]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
BASEPRI, FAULTMASK, and their _NS equivalents only exist on devices with
the Main Extension. However, the MRS instruction did not check this,
and the MSR instruction handled it inconsistently (warning BASEPRI, but
silently ignoring writes to BASEPRI_NS). Unify this behavior and always
warn when reading or writing any of these registers if the extension is
not present.
Signed-off-by: David Reiss <dreiss@meta.com>
Message-id: 167330628518.10497.13100425787268927786-0@git.sr.ht
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a 64-bit register on AArch64, even if the high 44 bits
are RES0. Because this is defined as ARM_CP_STATE_BOTH, we are
asserting that the cpreg field is 64-bits.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1400
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230115171633.3171890-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* riscv_htif: Support console output via proxy syscall
* Cleanup firmware and device tree loading
* Fix elen check when using vector extensions
* add RISC-V OpenSBI boot test
* Ensure we always follow MISA parsing
* Fix up masking of vsip/vsie accesses
* Trap on writes to stimecmp from VS when hvictl.VTI=1
* Introduce helper_set_rounding_mode_chkfrm
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmPKRP0ACgkQIeENKd+X
cFTHTwgAkyRDxrLepvI0KNaT0+cUBh+3QFlJ5JRtVnDW+5R+3aGT72PTS7Migqoh
H3IFCB2mcSdQvyjj2jDFlrFd0oVIaqE0+bnhouS/4nHB5S/vmapHi4Mc74Vv1CMB
rgXScL+C5gDOH1I7XjqOb1FY5Vxqyhi3IzdIoj+0ysUrGmUkqx+ij/cfQL7jkH9Q
slNAkorgwgrTgMgkJ5RKd4cjyv35O4XKLAsgixVTfJ+WcxKmc/zaJOkNM/UDnmxK
k2+2P8bshZWtWscXbm3oMC5+2ow1QtFedEkhHqb4adkQIyolKL7P1TfMlCgMSvES
BKl0DUhqQ+7F77tik3GPy9spQ6LpTQ==
=ifFF
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230120' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for QEMU 8.0
* riscv_htif: Support console output via proxy syscall
* Cleanup firmware and device tree loading
* Fix elen check when using vector extensions
* add RISC-V OpenSBI boot test
* Ensure we always follow MISA parsing
* Fix up masking of vsip/vsie accesses
* Trap on writes to stimecmp from VS when hvictl.VTI=1
* Introduce helper_set_rounding_mode_chkfrm
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmPKRP0ACgkQIeENKd+X
# cFTHTwgAkyRDxrLepvI0KNaT0+cUBh+3QFlJ5JRtVnDW+5R+3aGT72PTS7Migqoh
# H3IFCB2mcSdQvyjj2jDFlrFd0oVIaqE0+bnhouS/4nHB5S/vmapHi4Mc74Vv1CMB
# rgXScL+C5gDOH1I7XjqOb1FY5Vxqyhi3IzdIoj+0ysUrGmUkqx+ij/cfQL7jkH9Q
# slNAkorgwgrTgMgkJ5RKd4cjyv35O4XKLAsgixVTfJ+WcxKmc/zaJOkNM/UDnmxK
# k2+2P8bshZWtWscXbm3oMC5+2ow1QtFedEkhHqb4adkQIyolKL7P1TfMlCgMSvES
# BKl0DUhqQ+7F77tik3GPy9spQ6LpTQ==
# =ifFF
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Jan 2023 07:38:37 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20230120' of https://github.com/alistair23/qemu: (37 commits)
hw/riscv/virt.c: move create_fw_cfg() back to virt_machine_init()
target/riscv: Remove helper_set_rod_rounding_mode
target/riscv: Introduce helper_set_rounding_mode_chkfrm
tcg/riscv: Use tcg_pcrel_diff in tcg_out_ldst
target/riscv: Trap on writes to stimecmp from VS when hvictl.VTI=1
target/riscv: Fix up masking of vsip/vsie accesses
hw/riscv: use ms->fdt in riscv_socket_fdt_write_distance_matrix()
hw/riscv: use MachineState::fdt in riscv_socket_fdt_write_id()
hw/riscv/virt.c: remove 'is_32_bit' param from create_fdt_socket_cpus()
hw/riscv/sifive_u.c: simplify create_fdt()
hw/riscv/virt.c: simplify create_fdt()
hw/riscv/spike.c: simplify create_fdt()
target/riscv: Use TARGET_FMT_lx for env->mhartid
target/riscv/cpu.c: do not skip misa logic in riscv_cpu_realize()
target/riscv/cpu: set cpu->cfg in register_cpu_props()
hw/riscv/boot.c: use MachineState in riscv_load_kernel()
hw/riscv/boot.c: use MachineState in riscv_load_initrd()
hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()
hw/riscv: write initrd 'chosen' FDT inside riscv_load_initrd()
hw/riscv/spike.c: load initrd right after riscv_load_kernel()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have two inclusion loops:
block/block.h
-> block/block-global-state.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
block/block.h
-> block/block-io.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
I believe these go back to Emanuele's reorganization of the block API,
merged a few months ago in commit d7e2fe4aac.
Fortunately, breaking them is merely a matter of deleting unnecessary
includes from headers, and adding them back in places where they are
now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221133551.3967339-2-armbru@redhat.com>
The only setting of RISCV_FRM_ROD is from the vector unit,
and now handled by helper_set_rounding_mode_chkfrm.
This helper is now unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230115160657.3169274-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The new helper always validates the contents of FRM, even
if the new rounding mode is not DYN. This is required by
the vector unit.
Track whether we've validated FRM separately from whether
we've updated fp_status with a given rounding mode, so that
we can elide calls correctly.
This partially reverts d6c4d3f2a6 which attempted the to do
the same thing, but with two calls to gen_set_rm(), which is
both inefficient and tickles an assertion in decode_save_opc.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1441
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230115160657.3169274-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Per the AIA specification, writes to stimecmp from VS level should
trap when hvictl.VTI is set since the write may cause vsip.STIP to
become unset.
Fixes: 3ec0fe18a3 ("target/riscv: Add vstimecmp support")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221215224541.1423431-2-abrestic@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current logic attempts to shift the VS-level bits into their correct
position in mip while leaving the remaining bits in-tact. This is both
pointless and likely incorrect since one would expect that any new, future
VS-level interrupts will get their own position in mip rather than sharing
with their (H)S-level equivalent. Fix this, and make the logic more
readable, by just making off the VS-level bits and shifting them into
position.
This also fixes reads of vsip, which would only ever report vsip.VSSIP
since the non-writable bits got masked off as well.
Fixes: d028ac7512 ("arget/riscv: Implement AIA CSRs for 64 local interrupts on RV32")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221215224541.1423431-1-abrestic@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
env->mhartid is currently casted to long before printed, which drops
the high 32-bit for rv64 on 32-bit host. Use TARGET_FMT_lx instead.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230109152655.340114-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All RISCV CPUs are setting cpu->cfg during their cpu_init() functions,
meaning that there's no reason to skip all the misa validation and setup
if misa_ext was set beforehand - especially since we're setting an
updated value in set_misa() in the end.
Put this code chunk into a new riscv_cpu_validate_set_extensions()
helper and always execute it regardless of what the board set in
env->misa_ext.
This will put more responsibility in how each board is going to init
their attributes and extensions if they're not using the defaults.
It'll also allow realize() to do its job looking only at the extensions
enabled per se, not corner cases that some CPUs might have, and we won't
have to change multiple code paths to fix or change how extensions work.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230113175230.473975-3-dbarboza@ventanamicro.com>
[ Changes by AF:
- Rebase
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is an informal contract between the cpu_init() functions and
riscv_cpu_realize(): if cpu->env.misa_ext is zero, assume that the
default settings were loaded via register_cpu_props() and do validations
to set env.misa_ext. If it's not zero, skip this whole process and
assume that the board somehow did everything.
At this moment, all SiFive CPUs are setting a non-zero misa_ext during
their cpu_init() and skipping a good chunk of riscv_cpu_realize(). This
causes problems when the code being skipped in riscv_cpu_realize()
contains fixes or assumptions that affects all CPUs, meaning that SiFive
CPUs are missing out.
To allow this code to not be skipped anymore, all the cpu->cfg.ext_*
attributes needs to be set during cpu_init() time. At this moment this
is being done in register_cpu_props(). The SiFive boards are setting
their own extensions during cpu_init() though, meaning that they don't
want all the defaults from register_cpu_props().
Let's move the contract between *_cpu_init() and riscv_cpu_realize() to
register_cpu_props(). Inside this function we'll check if
cpu->env.misa_ext was set and, if that's the case, set all relevant
cpu->cfg.ext_* attributes, and only that. Leave the 'misa_ext' = 0 case
as is today, i.e. loading all the defaults from riscv_cpu_extensions[].
register_cpu_props() can then be called by all the cpu_init() functions,
including the SiFive ones. This will make all CPUs behave more in line
with what riscv_cpu_realize() expects.
This will also make the cpu_init() functions even more alike, but at this
moment we would need some design changes in how we're initializing
extensions/attributes (e.g. some CPUs are setting cfg options after
register_cpu_props(), so we can't simply add the function to a common
post_init() hook) to make a common cpu_init() code across all CPUs.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230113175230.473975-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The elen check should be cpu->cfg.elen in range [8, 64].
Signed-off-by: Dongxue Zhang <elta.era@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwe_liu@linux.alibaba.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <167236721596.15277.2653405273227256289-0@git.sr.ht>
[ Changes by AF:
- Tidy up commit message
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present for some unknown reason the HTIF registers (fromhost &
tohost) are defined in the RISC-V CPUArchState. It should really
be put in the HTIFState struct as it is only meaningful to HTIF.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-6-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
A bunch of cleanups from various people.
- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation
-----BEGIN PGP SIGNATURE-----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=oXX+
-----END PGP SIGNATURE-----
Merge tag 'mips-20230113' of https://github.com/philmd/qemu into staging
MIPS patches queue
A bunch of cleanups from various people.
- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmPBekAACgkQ4+MsLN6t
# wN4wjxAAtYxyt6WUBpiYfV/LnbQFpAsacues1Vhy9MPYEg5a/iuXWKvWtgRYvGww
# qR0GVQH8rH7tgnCZK+ioq9jX+hvfBskP6CnKhxmb5zDGm7vP7jhhu8UFWY/EtBgq
# 0zpNeLMXtnRJ6PBqo/nWFCVtcpDRZ6IkSbpGWkVkciRFc5n/2VCnlIj8k2I1oMvL
# 11cp2xFQnaPReFXIpMjJHuHv1NObykdlvVg6wQo/A/4qIb8EvJQEPmePjG9Sf0i0
# v2dhnnxG9mze7+uq0dIC16x8Azko3N7dmtNlBU/aGb9OELwx35aux2M4dNDVogwn
# DqL/Wsk54TFewECOfS48t/a/TqV8j/ISW1d/JvovBrN2KovmIAbtqHuMUqKVk5l0
# 23ZOIIPIYwmScZwIlkCIGUuIzFig1zhEmQcoEQaFe/B0oLB2eN/x0Bk9Yklo+i2A
# WNiyiAj7k5492qEdndOySEEDVt6886F/+CdQ6QYF5Z1L/ELck7XHBH3mGDznWpPn
# 6IURyVquPJx7ul62jSGI+Gc+qakNoahIhPo5O7hklOM9GwWNOWXHveyb7xjs7j+O
# eWyVcet+o7hoHkCzmfbyTPySI4qCpF9fA42jqPhATwQPwmGXpbr+4BxUq3KtE43y
# w9tEigwd4voN3dWLItVh6QE4in70osz3XHp93byvo8bHlS0huVY=
# =oXX+
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Jan 2023 15:35:28 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'mips-20230113' of https://github.com/philmd/qemu: (46 commits)
scripts/git.orderfile: Display MAINTAINERS changes first
target/mips: Restrict 'qapi-commands-machine.h' to system emulation
hw/mips/boston: Rename MachineState 'mc' pointer to 'ms'
hw/pci-host/bonito: Declare TYPE_BONITO_PCI_HOST_BRIDGE in header
hw/pci-host/bonito: Use 'bonito_pci' for PCI function #0 code
hw/pci-host/bonito: Use 'bonito_host' for PCI host bridge code
hw/pci-host/bonito: Convert to 3-phase reset
softmmu/rtc: Emit warning when using driftfix=slew on systems without mc146818
hw/rtc/mc146818rtc: Make the mc146818 RTC device target independent
hw/core/qdev-properties-system: Allow the 'slew' policy only on x86
hw/intc: Extract the IRQ counting functions into a separate file
hw/intc/i8259: Make using the isa_pic singleton more type-safe
hw/usb/hcd-uhci: Introduce TYPE_ defines for device models
hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig
hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specific
hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specific
hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs()
hw/pci/pci_host: Trace config accesses on unexisting functions
mips: Always include nanomips disassembler
mips: Remove support for trap and emulate KVM
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The FPSR quotient byte should be set to the value of the quotient and not the
result. Manually calculate the quotient in the frem helper in round to nearest
even mode (note this is different from the quotient calculated internally for
fmod), and use it to set the quotient byte accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1314
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114232959.118224-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The FPSR quotient byte should be set to the value of the quotient and not the
result. Switch from using floatx80_mod() to floatx80_modrem() which returns
the quotient as a uint64_t which can be used for the quotient byte.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114232959.118224-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This enables the quotient parameter to be changed from int32_t to uint32_t and
also allows the extra sign logic in make_quotient() to be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230114232959.118224-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Extract the QMP functions from cpu.c (which is always compiled) to
the new 'sysemu/mips-qmp-cmds.c' unit (which is only compiled when
system emulation is selected).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219211034.70491-4-philmd@linaro.org>
Since the nanomips disassembler is not C++ code anymore, it need not
depend on link_language == cpp. Always include it and remove the
CONFIG_NANOMIPS_DIS symbol.
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230110084942.299460-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
ARM trusted firmware, when built with FEAT_HCX support, sets SCR_EL3.HXEn bit
to allow EL2 to modify HCRX_EL2 register without trapping it in EL3. Qemu
uses a valid mask to clear unsupported SCR_EL3 bits when emulating SCR_EL3
write, and that mask doesn't include SCR_EL3.HXEn bit even if FEAT_HCX is
enabled and exposed to the guest. As a result EL3 writes of that bit are
ignored.
Cc: qemu-stable@nongnu.org
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Message-id: 20230105221251.17896-4-eiakovlev@linux.microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This support was limited to the Malta board, drop it.
I do not have a machine that can run VZ KVM, so I am assuming
that it works for -M malta as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221221091718.71844-1-philmd@linaro.org>
VRCPSS, VRSQRTSS and VCVTSx2Sx have a 32-bit or 64-bit memory operand,
which is represented in the decoding tables by X86_VEX_REPScalar. Add it
to the tables, and make validate_vex() handle the case of an instruction
that is in exception type 4 without the REP prefix and exception type 5
with it; this is the cas of VRCP and VRSQRT.
Reported-by: yongwoo <https://gitlab.com/yongwoo36>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1377
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To avoid compilation errors when -Werror=maybe-uninitialized is used,
add a default case with g_assert_not_reached().
Otherwise with GCC 11.3.1 "cc (GCC) 11.3.1 20220421 (Red Hat 11.3.1-2)"
we get:
../target/i386/ops_sse.h: In function ‘helper_vpermdq_ymm’:
../target/i386/ops_sse.h:2495:13: error: ‘r3’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
2495 | d->Q(3) = r3;
| ~~~~~~~~^~~~
../target/i386/ops_sse.h:2494:13: error: ‘r2’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
2494 | d->Q(2) = r2;
| ~~~~~~~~^~~~
../target/i386/ops_sse.h:2493:13: error: ‘r1’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
2493 | d->Q(1) = r1;
| ~~~~~~~~^~~~
../target/i386/ops_sse.h:2492:13: error: ‘r0’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
2492 | d->Q(0) = r0;
| ~~~~~~~~^~~~
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221222140158.1260748-1-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When in 64-bit mode, IDT entiries are 16 bytes, so `intno * 16` is used
for base/limit/offset calculations. However, even in 64-bit mode, the
exception error code still uses bits [3,16) for the invlaid interrupt
index.
This means the error code should still be `intno * 8 + 2` even in 64-bit
mode.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1382
Signed-off-by: Joe Richey <joerichey@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Rework and improvements of the EINTR handling by Nikita
* Deprecate the -no-hpet command line option
* Disable the qtests in the 32-bit Windows CI job again
* Some other misc fixes here and there
-----BEGIN PGP SIGNATURE-----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=D+Yw
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu into staging
* s390x header clean-ups from Philippe
* Rework and improvements of the EINTR handling by Nikita
* Deprecate the -no-hpet command line option
* Disable the qtests in the 32-bit Windows CI job again
* Some other misc fixes here and there
# gpg: Signature made Mon 09 Jan 2023 14:21:19 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/windows: Do not run the qtests in the msys2-32bit job
error handling: Use RETRY_ON_EINTR() macro where applicable
Refactoring: refactor TFR() macro to RETRY_ON_EINTR()
docs/interop: Change the vnc-ledstate-Pseudo-encoding doc into .rst
i386: Deprecate the -no-hpet QEMU command line option
tests/qtest/bios-tables-test: Replace -no-hpet with hpet=off machine parameter
tests/readconfig: spice doesn't support unix socket on windows yet
target/s390x: Restrict sysemu/reset.h to system emulation
target/s390x/tcg/excp_helper: Restrict system headers to sysemu
target/s390x/tcg/misc_helper: Remove unused "memory.h" include
hw/s390x/pv: Restrict Protected Virtualization to sysemu
exec/memory: Expose memory_region_access_valid()
MAINTAINERS: Add MIPS-related docs and configs to the MIPS architecture section
tests/vm: Update get_default_jobs() to work on non-x86_64 non-KVM hosts
qemu-iotests/stream-under-throttle: do not shutdown QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In user emulation, threads -- implemented as CPU -- are
created/destroyed, but never reset. There is no point in
allowing the user emulation access the sysemu/reset API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221220145625.26392-5-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-6-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-5-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Protected Virtualization is irrelevant in user emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-4-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmO3Ym0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNYmwf+LHEw+4T0fk1+2NfgIzH3+8s1EqDm
Ai56EjxO/p5NUptflXAnhn4P3LawswmmNE0ZIFFFBgwG5E9L+Jj/u5efuLu4uYPg
bboEBDn8nxSNN2l08u9TyS6kSWSxbwwrs7i2+V+4uQIlVIcCHu+A0vpXns4vWwY0
zZGF8CgJKDQdPIxdXrH8+6/xtadQ8uDkYsAWDiY/nhozCsCUTAZGTXWEQbHJLARI
Z4X+Cmz/NFB9G4ka6K/y0HbQw99KA8G/EMPUSglN0ya10yjpyzrmeI7IlIves+5U
8lhCZXyBhaV9GXlIK1vIgEXlHf83C19a+v0DpW0bpxK631n2VR5y3CArBg==
=2Koq
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Atomic memslot updates for KVM (Emanuele, David)
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)
# gpg: Signature made Thu 05 Jan 2023 23:51:09 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
i386: SGX: remove deprecated member of SGXInfo
target/i386: Add SGX aex-notify and EDECCSSA support
util: remove support -chardev tty and -chardev parport
util: remove support for hex numbers with a scaling suffix
KVM: remove support for kernel-irqchip=off
docs: do not talk about past removal as happening in the future
meson: accept relative symlinks in "meson introspect --installed" data
meson: cleanup compiler detection
meson: support meson 0.64 -Doptimization=plain
configure: test all warnings
tests/qapi-schema: remove Meson workaround
meson: cleanup dummy-cpus.c rules
meson: tweak hardening options for Windows
configure: remove backwards-compatibility and obsolete options
configure: preserve qemu-ga variables
configure: cleanup $cpu tests
configure: remove dead function
configure: remove useless write_c_skeleton
ide: Add "ide-cf" driver, a CompactFlash card
ide: Add 8-bit data mode
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmO3b5sACgkQIeENKd+X
cFTD8Af+L0OaGzE4C0jil7LdITFKk7ltdTg3yw84ZBvIxrEWMWlt5Yj3Ez5OIPbY
WpPmCLoJ9XM/5CV5PuPjxcFFExWjXLNeMEvaaT/3/3jPPnA/M/AbZa4hefKRluTg
kkvBiOuRMPXiYLki5xAHmjD/1j6SQ8ghylPLxYQqyGq87WZt4Dx9msOTZLVzmmYl
8y9oC8j6yO2UBZYC1TxSkKxFbj+Cp2HmtBZ09tDzwRL6DpRvIlfftiLl8X3awMlK
YTzCIrmllc38/+cV9IpQhdXzDUZ1kM7Zy56JbJl3XOsS4VnUYGmEtrKYpYQ2CKLY
/tcmrDKNw1ArWcP1axNN8FHfhy1FyQ==
=SH+C
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu into staging
First RISC-V PR for QEMU 8.0
* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups
# gpg: Signature made Fri 06 Jan 2023 00:47:23 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu: (43 commits)
hw/intc: sifive_plic: Fix the pending register range check
hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initialization
hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0
hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb
hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev"
hw/riscv: sifive_e: Fix the number of interrupt sources of PLIC
hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLIC
hw/intc: sifive_plic: Update "num-sources" property default value
hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize()
hw/intc: sifive_plic: Improve robustness of the PLIC config parser
hw/intc: sifive_plic: Drop PLICMode_H
hw/riscv: spike: Remove misleading comments
hw/riscv: Sort machines Kconfig options in alphabetical order
hw/riscv: Fix opentitan dependency to SIFIVE_PLIC
hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers
hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC
RISC-V: Add Zawrs ISA extension support
target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+
target/riscv: Simplify helper_sret() a little bit
target/riscv: Set pc_succ_insn for !rvc illegal insn
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add tcg backend paired register allocation.
Cleanup tcg backend function call abi.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmO3kZEdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/JpwgAj9kwpiWehGWrpQp9
rbEL+Fsx+SDhnoLVpF6nmSB1nkDqdgkdnhyRaLX9wM69bnocsGppZ5sd57J/cH3m
WiODVVbWP80WHonx5EN4htQv99TZWqVmXVl11DwOfsRUmINl4GG4kvHOOABd8hdc
39eRgGBBMyMShc6MUJiToyjEAcZPcGAiHkSW9YDGbvzhlloNWh46eLP1bdW3UJWK
UiEwPpXqg+L0V8nuuQnSFoPr5FIJmmoTeiGCRHXtvgOT7J8/6eKUESpfcKkHq1ye
dwcJQATuZip3+hyCCVveiZ86TQ81RMp9en1qw+HVzfed1Ial3Tk+tqiDqZJFm25b
GMpa5g==
=OjPl
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu into staging
Fix race conditions in new user-only vma tracking.
Add tcg backend paired register allocation.
Cleanup tcg backend function call abi.
# gpg: Signature made Fri 06 Jan 2023 03:12:17 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu: (47 commits)
tests/tcg/multiarch: add vma-pthread.c
accel/tcg: Handle false negative lookup in page_check_range
accel/tcg: Use g_free_rcu for user-exec interval trees
accel/tcg: Fix tb_invalidate_phys_page_unwind
tcg: Add TCGHelperInfo argument to tcg_out_call
tcg/aarch64: Merge tcg_out_callr into tcg_out_call
tcg: Move ffi_cif pointer into TCGHelperInfo
tcg: Factor init_ffi_layouts() out of tcg_context_init()
tcg: Convert typecode_to_ffi from array to function
tcg: Reorg function calls
tcg: Use output_pref wrapper function
tcg: Vary the allocation size for TCGOp
tcg: Pass number of arguments to tcg_emit_op() / tcg_op_insert_*()
accel/tcg/plugin: Use copy_op in append_{udata,mem}_cb
accel/tcg/plugin: Avoid duplicate copy in copy_call
accel/tcg/plugin: Don't search for the function pointer index
tcg: Use TCG_CALL_ARG_EVEN for TCI special case
tcg: Replace TCG_TARGET_EXTEND_ARGS with TCG_TARGET_CALL_ARG_I32
tcg: Replace TCG_TARGET_CALL_ALIGN_ARGS with TCG_TARGET_CALL_ARG_I64
tcg: Introduce TCGCallReturnKind and TCGCallArgumentKind
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmO3Cl8ACgkQewJE+xLe
RCKopQf/eVpmA04C792MIYHJnAaASbXZ1FA2Q33l9zrPt9V5oL0cer+rNPlqwVIb
jUdFLrT6ppe3jgkzeZVzLTGoNiLO1BnpH3+NV5ZpnMBON4g6/uyagRJekvb5xcDw
a832LM77zWrSQbV+Z3C0sn87j7u0YFYiXtya3mJUv6iSfKZnR4bGZH+LW2dOrnXn
+uMGnjjUQ2Ac7mvHTnrtooVUNhgRpTq4tMBwl1mE/hacUuejBjDgMLHDb6e4yPC7
g0/BuMB1ygBYFDINJ9El5oD0JtYHZjHOX4TKs6i0oXntoeveut62oGRwgLrk8eRe
lwKiEvFNrz/RYmCIy8Pz7s+5HQUgqA==
=/i3r
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20230105' of https://github.com/quic/qemu into staging
Hexagon update: patches from several folks
# gpg: Signature made Thu 05 Jan 2023 17:35:27 GMT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20230105' of https://github.com/quic/qemu:
Update scripts/meson-buildoptions.sh
Hexagon (target/hexagon) implement mutability mask for GPRs
target/hexagon: suppress unused variable warning
target/hexagon/idef-parser: fix two typos in README
tests/tcg/hexagon: fix underspecifed asm constraints
target/hexagon: rename aliased register HEX_REG_P3_0
linux-user/hexagon: fix signal context save & restore
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for the Zawrs ISA extension.
Given the current (incomplete) implementation of reservation sets
there seems to be no way to provide a full emulation of the WRS
instruction (wake on reservation set invalidation or timeout or
interrupt). Therefore, we just exit the TB and return to the main loop.
The specification can be found here:
https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc
Note, that the Zawrs extension is frozen, but not ratified yet.
Changes since v3:
* Remove "RFC" since the extension is frozen
* Rebase on master and fix integration issues
* Fix entry ordering in extension list
Changes since v2:
* Rebase on master and resolve conflicts
* Adjustments according to a specification change
* Inline REQUIRE_ZAWRS() since it has only one user
Changes since v1:
* Adding zawrs to the ISA string that is passed to the kernel
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221005144948.3421504-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since priv spec v1.12, MRET and SRET now clear mstatus.MPRV when
leaving M-mode.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221207090037.281452-2-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are 2 paths in helper_sret() and the same mstatus update codes
are replicated. Extract the common parts to simplify it a little bit.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221207090037.281452-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Failure to set pc_succ_insn may result in a TB covering zero bytes,
which triggers an assert within the code generator.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1224
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221203175744.151365-1-richard.henderson@linaro.org>
[ Changes by AF:
- Add missing run-plugin-test-noc-% line
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The priv spec v1.12 says:
If no PMP entry matches an M-mode access, the access succeeds. If
no PMP entry matches an S-mode or U-mode access, but at least one
PMP entry is implemented, the access fails. Failed accesses generate
an instruction, load, or store access-fault exception.
At present the exception cause is set to 'illegal instruction' but
should have been 'instruction access fault'.
Fixes: d102f19a20 ("target/riscv/pmp: Raise exception if no PMP entry is configured")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221205065303.204095-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
sstatus register dump is currently missing in riscv_cpu_dump_state().
As sstatus is a copy of mstatus, which is described in the priv spec,
it seems redundant to print the same information twice.
Add some comments for this to let people know this is intentional.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221125050354.3166023-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
let tlb_fill() function also increments PMU counter when it is from
two-stage translation, so QEMU could also monitor these PMU events when
CPU runs in VS/VU mode (like running guest OS).
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221123090635.6574-1-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should use "&&" instead of "&" when checking hcounteren.TM and
henvcfg.STCE bits.
Fixes: 3ec0fe18a3 ("target/riscv: Add vstimecmp suppor")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221108125703.1463577-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Avoid calling riscv_itrigger_enabled() when calculate the tbflags.
As the itrigger enable status can only be changed when write
tdata1, migration load or itrigger fire, update env->itrigger_enabled
at these places.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-5-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When QEMU is not in icount mode, execute instruction one by one. The
tdata1 can be read directly.
When QEMU is in icount mode, use a timer to simulate the itrigger. The
tdata1 may be not right because of lazy update of count in tdata1. Thus,
We should pack the adjusted count into tdata1 before read it back.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The max count in itrigger can be 0x3FFF, which will cause a no trivial
translation and execution overload.
When icount is enabled, QEMU provides API that can fetch guest
instruction number. Thus, we can set an timer for itrigger with
the count as deadline.
Only when timer expires or priviledge mode changes, do lazy update
to count.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-3-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When icount is not enabled, there is no API in QEMU that can get the
guest instruction number.
Translate the guest code in a way that each TB only has one instruction.
After executing the instruction, decrease the count by 1 until it reaches 0
where the itrigger fires.
Note that only when priviledge matches the itrigger configuration,
the count will decrease.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds a mechanism to generate a virtual instruction
instruction exception instead of an illegal instruction exception
during instruction decode when virt is enabled.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221016124726.102129-4-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Accesses to henvcfg, henvcfgh and senvcfg are allowed only if the corresponding
bit in mstateen0/hstateen0 is enabled. Otherwise an illegal instruction trap is
generated.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221016124726.102129-3-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Smstateen extension specifies a mechanism to close
the potential covert channels that could cause security issues.
This patch adds the CSRs defined in the specification and
the corresponding predicates and read/write functions.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221016124726.102129-2-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Only the pmp index that be checked by pmp_hart_has_privs can be used
by pmp_get_tlb_size to avoid an error pmp index.
Before modification, we may use an error pmp index. For example,
we check address 0x4fc, and the size 0x4 in pmp_hart_has_privs. If there
is an pmp rule, valid range is [0x4fc, 0x500), then pmp_hart_has_privs
will return true;
However, this checked pmp index is discarded as pmp_hart_has_privs
return bool value. In pmp_is_range_in_tlb, it will traverse all pmp
rules. The tlb_sa will be 0x0, and tlb_ea will be 0xfff. If there is
a pmp rule [0x10, 0x14), it will be misused as it is legal in
pmp_get_tlb_size.
As we have already known the correct pmp index, just remove the
remove the pmp_is_range_in_tlb and get tlb size directly from
pmp_get_tlb_size.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221012060016.30856-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The new SGX Asynchronous Exit (AEX) notification mechanism (AEX-notify)
allows one enclave to receive a notification in the ERESUME after the
enclave exit due to an AEX. EDECCSSA is a new SGX user leaf function
(ENCLU[EDECCSSA]) to facilitate the AEX notification handling.
Whether the hardware supports to create enclave with AEX-notify support
is enumerated via CPUID.(EAX=0x12,ECX=0x1):EAX[10]. The new EDECCSSA
user leaf function is enumerated via CPUID.(EAX=0x12,ECX=0x0):EAX[11].
Add support to allow to expose the new SGX AEX-notify feature and the
new EDECCSSA user leaf function to KVM guest.
Link: https://lore.kernel.org/lkml/166760360549.4906.809756297092548496.tip-bot2@tip-bot2/
Link: https://lore.kernel.org/lkml/166760360934.4906.2427175408052308969.tip-bot2@tip-bot2/
Reviewed-by: Yang Zhong <yang.zhong@linux.intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20221109024834.172705-1-kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-machine kernel-irqchip=off is broken for many guest OSes; kernel-irqchip=split
is the replacement that works, so remove the deprecated support for the former.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the official extend/extract functions instead of routines
that will shortly be internal to tcg.
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Some registers are defined to have immutable bits, this commit
will implement that behavior.
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230105102349.2181856-1-quic_mliebel@quicinc.com>
This patch manually suppresses a warning for an unused variable
(yynerrs) emitted by bison.
This warning has been triggered for the first time by clang 15.
This patch also disables `-Wextra`, which is not usually adopted in
QEMU. However, clang 15 triggers the warning fixed in this patch even in
absence of `-Wextra`.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221221155327.1504117-1-ale@rev.ng>
The patch renames the identifier of the 32bit register
HEX_REG_P3_0 to HEX_REG_P3_0_ALIASED.
This change is to intended to provide some warning that
HEX_REG_P3_0 is an aliased register which has multiple
representations in CPU state and therefore might require
special handling in some contexts. The hope is to prevent
accidental misuse of this register e.g the issue reported
for the signals tests failure [here][1].
[1]: https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg01102.html
Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221229092006.10709-3-quic_mthiyaga@quicinc.com>
In CPUID registers exposed to userspace, some registers were missing
and some fields were not exposed. This patch aligns exposed ID
registers and their fields with what the upstream kernel currently
exposes.
Specifically, the following new ID registers/fields are exposed to
userspace:
ID_AA64PFR1_EL1.BT: bits 3-0
ID_AA64PFR1_EL1.MTE: bits 11-8
ID_AA64PFR1_EL1.SME: bits 27-24
ID_AA64ZFR0_EL1.SVEver: bits 3-0
ID_AA64ZFR0_EL1.AES: bits 7-4
ID_AA64ZFR0_EL1.BitPerm: bits 19-16
ID_AA64ZFR0_EL1.BF16: bits 23-20
ID_AA64ZFR0_EL1.SHA3: bits 35-32
ID_AA64ZFR0_EL1.SM4: bits 43-40
ID_AA64ZFR0_EL1.I8MM: bits 47-44
ID_AA64ZFR0_EL1.F32MM: bits 55-52
ID_AA64ZFR0_EL1.F64MM: bits 59-56
ID_AA64SMFR0_EL1.F32F32: bit 32
ID_AA64SMFR0_EL1.B16F32: bit 34
ID_AA64SMFR0_EL1.F16F32: bit 35
ID_AA64SMFR0_EL1.I8I32: bits 39-36
ID_AA64SMFR0_EL1.F64F64: bit 48
ID_AA64SMFR0_EL1.I16I64: bits 55-52
ID_AA64SMFR0_EL1.FA64: bit 63
ID_AA64MMFR0_EL1.ECV: bits 63-60
ID_AA64MMFR1_EL1.AFP: bits 47-44
ID_AA64MMFR2_EL1.AT: bits 35-32
ID_AA64ISAR0_EL1.RNDR: bits 63-60
ID_AA64ISAR1_EL1.FRINTTS: bits 35-32
ID_AA64ISAR1_EL1.BF16: bits 47-44
ID_AA64ISAR1_EL1.DGH: bits 51-48
ID_AA64ISAR1_EL1.I8MM: bits 55-52
ID_AA64ISAR2_EL1.WFxT: bits 3-0
ID_AA64ISAR2_EL1.RPRES: bits 7-4
ID_AA64ISAR2_EL1.GPA3: bits 11-8
ID_AA64ISAR2_EL1.APA3: bits 15-12
The code is also refactored to use symbolic names for ID register fields
for better readability and maintainability.
The test case in tests/tcg/aarch64/sysregs.c is also updated to match
the intended behavior.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Message-id: DS7PR12MB6309FB585E10772928F14271ACE79@DS7PR12MB6309.namprd12.prod.outlook.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: use Sn_n_Cn_Cn_n syntax to work with older assemblers
that don't recognize id_aa64isar2_el1 and id_aa64mmfr2_el1]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove some unused headers.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20221213190537.511-7-farosas@suse.de
[added back some includes that are still needed at this point]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the following:
ERROR: spaces required around that '|' (ctx:VxV)
ERROR: space required before the open parenthesis '('
ERROR: spaces required around that '+' (ctx:VxB)
ERROR: space prohibited between function name and open parenthesis '('
(the last two still have some occurrences in macros which I left
behind because it might impact readability)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix these:
WARNING: Block comments use a leading /* on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-2-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The check semihosting_enabled() wants to know if the guest is
currently in user mode. Unlike the other cases the test was inverted
causing us to block semihosting calls in non-EL0 modes.
Cc: qemu-stable@nongnu.org
Fixes: 19b26317e9 (target/arm: Honour -semihosting-config userspace=on)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All constants are taken from the ARM Cortex-R52 Processor TRM Revision: r1p3
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-8-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARMv8-R AArch32 CPUs behave as if TTBCR.EAE is always 1 even
tough they don't have the TTBCR register.
See ARM Architecture Reference Manual Supplement - ARMv8, for the ARMv8-R
AArch32 architecture profile Version:A.c section C1.2.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-5-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The v8R PMSAv8 has a two-stage MPU translation process, but, unlike
VMSAv8, the stage 2 attributes are in the same format as the stage 1
attributes (8-bit MAIR format). Rather than converting the MAIR
format to the format used for VMSA stage 2 (bits [5:2] of a VMSA
stage 2 descriptor) and then converting back to do the attribute
combination, allow combined_attrs_nofwb() to accept s2 attributes
that are already in the MAIR format.
We move the assert() to combined_attrs_fwb(), because that function
really does require a VMSA stage 2 attribute format. (We will never
get there for v8R, because PMSAv8 does not implement FEAT_S2FWB.)
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-4-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RVBAR shadows RVBAR_ELx where x is the highest exception
level if the highest EL is not EL3. This patch also allows
ARMv8 CPUs to change the reset address with
the rvbar property.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-3-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cores with PMSA have the MPUIR register which has the
same encoding as the MIDR alias with opc2=4. So we only
add that alias if we are not realizing a core that
implements PMSA.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221206102504.165775-2-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In get_phys_addr_twostage() we set the lg_page_size of the result to
the maximum of the stage 1 and stage 2 page sizes. This works for
the case where we do want to create a TLB entry, because we know the
common TLB code only creates entries of the TARGET_PAGE_SIZE and
asking for a size larger than that only means that invalidations
invalidate the whole larger area. However, if lg_page_size is
smaller than TARGET_PAGE_SIZE this effectively means "don't create a
TLB entry"; in this case if either S1 or S2 said "this covers less
than a page and can't go in a TLB" then the final result also should
be marked that way. Set the resulting page size to 0 if either
stage asked for a less-than-a-page entry, and expand the comment
to explain what's going on.
This has no effect for VMSA because currently the VMSA lookup always
returns results that cover at least TARGET_PAGE_SIZE; however when we
add v8R support it will reuse this code path, and for v8R the S1 and
S2 results can be smaller than TARGET_PAGE_SIZE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221212142708.610090-1-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In addition, use tcg_enabled instead of !kvm_enabled.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Adds checks to the hashst and hashchk instructions to only execute if
enabled by the relevant aspect in the DEXCR and HDEXCR.
This behaviour is guarded behind TARGET_PPC64 since Power10 is
currently the only implementation which has the DEXCR.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Message-Id: <20221220042330.2387944-3-nicholas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Define the DEXCR and HDEXCR as special purpose registers.
Each register occupies two SPR indicies, one which can be read in an
unprivileged state and one which can be modified in the appropriate
priviliged state, however both indicies refer to the same underlying
value.
Note that the ISA uses the abbreviation UDEXCR in two different
contexts: the userspace DEXCR, the SPR index which can be read from
userspace (implemented in this patch), and the ultravisor DEXCR, the
equivalent register for the ultravisor state (not implemented).
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221220042330.2387944-2-nicholas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Let's not leave developers in the dark where this log message comes
from.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216145709.271940-2-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
kvm_ppc.h is missing various declarations from "cpu.h":
target/ppc/kvm_ppc.h:128:40: error: unknown type name 'CPUPPCState'; did you mean 'CPUState'?
static inline int kvmppc_get_hypercall(CPUPPCState *env,
^~~~~~~~~~~
CPUState
include/qemu/typedefs.h:45:25: note: 'CPUState' declared here
typedef struct CPUState CPUState;
^
target/ppc/kvm_ppc.h:134:40: error: unknown type name 'PowerPCCPU'
static inline int kvmppc_set_interrupt(PowerPCCPU *cpu, int irq, int level)
^
target/ppc/kvm_ppc.h:285:38: error: unknown type name 'hwaddr'
hwaddr ptex, int n)
^
target/ppc/kvm_ppc.h:220:15: error: unknown type name 'target_ulong'
static inline target_ulong kvmppc_configure_v3_mmu(PowerPCCPU *cpu,
^
target/ppc/kvm_ppc.h:286:38: error: unknown type name 'ppc_hash_pte64_t'
static inline void kvmppc_read_hptes(ppc_hash_pte64_t *hptes,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221213123550.39302-2-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The fid instruction (Floating-Point Identify) puts the FPU model and
revision into the Status Register. Since those values shouldn't be 0,
store values there which a PCX-L2 (for 32-bit) or a PCX-W2 (for 64-bit)
would return. Noticed while trying to install MPE/iX.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Qemu currently emulates a 32-bit CPU only, and crashes with this error
when it faces a 64-bit load (e.g. "ldd 0(r26),r0") or a 64-bit store
(e.g. "std r26,0(r26)") instruction in the guest:
ERROR:../qemu/tcg/tcg-op.c:2822:tcg_canonicalize_memop: code should not be reached
Add checks for 64-bit sizes and generate an illegal instruction
exception if necessary.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Typo had double-writes to data registers.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1363
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The values in env->flags are a subset of tb->flags.
Restore only the bits that belong.
Cc: qemu-stable@nongnu.org
Fixes: ab419fd8a0 ("target/sh4: Fix TB_FLAG_UNALIGN")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20221212011345.GA2235238@roeck-us.net>
[rth: Reduce to only the the superh_cpu_synchronize_from_tb change]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Performance improvement
Add pkt and insn to DisasContext
Many functions need information from all 3 structures, so merge
them together.
2)
Bug fix
Fix predicated assignment to .tmp and .cur
3)
Performance improvement
Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
These functions will not be handled by idef-parser
4-11)
The final 8 patches improve change-of-flow handling.
Currently, we set the PC to a new address before exiting a TB. The
ultimate goal is to use direct block chaining. However, several steps
are needed along the way.
4)
When a packet has more than one change-of-flow (COF) instruction, only
the first one taken is considered. The runtime bookkeeping is only
needed when there is more than one COF instruction in a packet.
5, 6)
Remove PC and next_PC from the runtime state and always use a
translation-time constant. Note that next_PC is used by call instructions
to set LR and by conditional COF instructions to set the fall-through
address.
7, 8, 9)
Add helper overrides for COF instructions. In particular, we must
distinguish those that use a PC-relative address for the destination.
These are candidates for direct block chaining later.
10)
Use direct block chaining for packets that have a single PC-relative
COF instruction. Instead of generating the code while processing the
instruction, we record the effect in DisasContext and generate the code
during gen_end_tb.
11)
Use direct block chaining for tight loops. We look for TBs that end
with an endloop0 that will branch back to the TB start address.
12-21)
Instruction definition parser (idef-parser) from rev.ng
Parses the instruction semantics and generates TCG
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmOc2BEACgkQewJE+xLe
RCKqFwf/U/uWaQiF59OXyLHj9PR/bTf7PmZL12g8MTrntzmtIpRiTQb7ajJaLwyn
TcCG9j9Ss6kWBq+LH5TBvstnSN9/3qEgnj2b26y6EAn85mSh6fai4foUPjXFUy7m
2Of0kuc2WKmwxN9C2iw6Hm6pbL3FSnYzKtBuSFzYyAIS0doLFT97zE97XnBtTQ4C
49JdNgQW9CKt7cCpKTcQA4N3ZO8LdARdvOtTShX1++qd4Trm0haTGRdaygSrTlS7
Eeqs4nbakKEE6VH2iltPGKX+KHbMCf2ZW7lefxHi+EuzE0DBIVoM64UnalyFfcSU
hVMGF15HgAIAjecim0Y4AbPB/zVlEw==
=PC9+
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20221216-1' of https://github.com/quic/qemu into staging
1)
Performance improvement
Add pkt and insn to DisasContext
Many functions need information from all 3 structures, so merge
them together.
2)
Bug fix
Fix predicated assignment to .tmp and .cur
3)
Performance improvement
Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
These functions will not be handled by idef-parser
4-11)
The final 8 patches improve change-of-flow handling.
Currently, we set the PC to a new address before exiting a TB. The
ultimate goal is to use direct block chaining. However, several steps
are needed along the way.
4)
When a packet has more than one change-of-flow (COF) instruction, only
the first one taken is considered. The runtime bookkeeping is only
needed when there is more than one COF instruction in a packet.
5, 6)
Remove PC and next_PC from the runtime state and always use a
translation-time constant. Note that next_PC is used by call instructions
to set LR and by conditional COF instructions to set the fall-through
address.
7, 8, 9)
Add helper overrides for COF instructions. In particular, we must
distinguish those that use a PC-relative address for the destination.
These are candidates for direct block chaining later.
10)
Use direct block chaining for packets that have a single PC-relative
COF instruction. Instead of generating the code while processing the
instruction, we record the effect in DisasContext and generate the code
during gen_end_tb.
11)
Use direct block chaining for tight loops. We look for TBs that end
with an endloop0 that will branch back to the TB start address.
12-21)
Instruction definition parser (idef-parser) from rev.ng
Parses the instruction semantics and generates TCG
# gpg: Signature made Fri 16 Dec 2022 20:41:53 GMT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20221216-1' of https://github.com/quic/qemu: (21 commits)
target/hexagon: import additional tests
target/hexagon: call idef-parser functions
target/hexagon: import parser for idef-parser
target/hexagon: import lexer for idef-parser
target/hexagon: prepare input for the idef-parser
target/hexagon: introduce new helper functions
target/hexagon: make helper functions non-static
target/hexagon: make slot number an unsigned
target/hexagon: import README for idef-parser
target/hexagon: update MAINTAINERS for idef-parser
Hexagon (target/hexagon) Use direct block chaining for tight loops
Hexagon (target/hexagon) Use direct block chaining for direct jump/branch
Hexagon (target/hexagon) Add overrides for various forms of jump
Hexagon (target/hexagon) Add overrides for compound compare and jump
Hexagon (target/hexagon) Add overrides for direct call instructions
Hexagon (target/hexagon) Remove next_PC from runtime state
Hexagon (target/hexagon) Remove PC from the runtime state
Hexagon (target/hexagon) Only use branch_taken when packet has multi cof
Hexagon (target/hexagon) Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
Hexagon (target/hexagon) Fix predicated assignment to .tmp and .cur
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend gen_tcg_funcs.py in order to emit calls to the functions emitted
by the idef-parser, if available.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-11-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-10-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-9-anjo@rev.ng>
Introduce infrastructure necessary to produce a file suitable for being
parsed by the idef-parser. A build option is also added to fully disable
the output of idef-parser, which is useful for debugging.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-8-anjo@rev.ng>
These helpers will be employed by the idef-parser generated code, to
correctly implement instruction semantics. "Helper" functions, in the
context of this patch, refers to functions which provide a manual TCG
implementation of certain features.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Niccolò Izzo <nizzo@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-6-anjo@rev.ng>
Make certain helper functions non-static, making them available outside
genptr.c. These functions are required by code generated by the
idef-parser.
This commit also makes some functions in op_helper.c non-static in order
to avoid having them marked as unused when using the idef-parser
generated code.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-5-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-4-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-3-anjo@rev.ng>
Direct block chaining is documented here
https://qemu.readthedocs.io/en/latest/devel/tcg.html#direct-block-chaining
Hexagon inner loops end with the endloop0 instruction
To go back to the beginning of the loop, this instructions writes to PC
from register SA0 (start address 0). To use direct block chaining, we
have to assign PC with a constant value. So, we specialize the code
generation when the start of the translation block is equal to SA0.
When this is the case, we defer the compare/branch from endloop0 to
gen_end_tb. When this is done, we can assign the start address of the TB
to PC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-12-tsimpson@quicinc.com>
Direct block chaining is documented here
https://qemu.readthedocs.io/en/latest/devel/tcg.html#direct-block-chaining
Recall that Hexagon allows packets with multiple jumps where only the
first one with a true predicate will actually jump. We can use
tcg_gen_goto_tb/tcg_gen_exit_tb when the packet contains a single
PC-relative branch or jump. If not, we use tcg_gen_lookup_and_goto_ptr.
We add the following to DisasContext in order to delay the branching
until the end of packet commit (in gen_end_tb)
branch_cond
The TCGCond condition under which the branch is taken
When branch_cond == TCG_COND_NEVER, there isn't a single
direct branch in this packet.
When branch_cond != TCG_COND_ALWAYS, the value is in
hex_branch_taken
branch_dest
The destination of the branch
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-11-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-10-tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-9-tsimpson@quicinc.com>
The imported files don't properly mark all CONDEXEC instructions, so
we add some logic to hex_common.py to add the attribute.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-7-tsimpson@quicinc.com>
Add pc field to Packet structure
For helpers that need PC, pass an extra argument
Remove slot arg from conditional jump helpers
On a trap0, copy pkt->pc into hex_gpr[HEX_REG_PC]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-6-tsimpson@quicinc.com>
When a packet has more than one change-of-flow instruction, only the first
one to branch is considered. We use the branch_taken variable to keep
track of this.
However, when there is a single cof instruction, we don't need the same
amount of bookkeeping.
We add the pkt_has_multi_cof member to the Packet structure, and pass this
information to the needed functions.
When there is a generated helper function with cof, the generator will
pass this pkt_has_multi_cof as a runtime value.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-5-tsimpson@quicinc.com>
These instructions will not be generated by idef-parser, so we override
them manually.
Test cases added to tests/tcg/hexagon/usr.c
Co-authored-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221108162906.3166-4-tsimpson@quicinc.com>
Here are example instructions with a predicated .tmp/.cur assignment
if (p1) v12.tmp = vmem(r7 + #0)
if (p0) v12.cur = vmem(r9 + #0)
The .tmp/.cur indicates that references to v12 in the same packet
take the result of the load. However, when the predicate is false,
the value at the start of the packet should be used. After the packet
commits, the .tmp value is dropped, but the .cur value is maintained.
To fix this bug, we preload the original value from the HVX register
into the temporary used for the result.
Test cases added to tests/tcg/hexagon/hvx_misc.c
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Co-authored-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-3-tsimpson@quicinc.com>
This enables us to reduce the number of parameters to many functions
In particular, the generated functions previously took all 3 as arguments
Not only does this simplify the code, it improves the translation time
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-2-tsimpson@quicinc.com>
Convert the xtensa CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20221124115023.2437291-20-peter.maydell@linaro.org
Convert the tricore CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20221124115023.2437291-19-peter.maydell@linaro.org
Convert the sparc CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20221124115023.2437291-18-peter.maydell@linaro.org
Convert the sh4 CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20221124115023.2437291-17-peter.maydell@linaro.org
Convert the rx CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20221124115023.2437291-16-peter.maydell@linaro.org
Convert the riscv CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20221124115023.2437291-15-peter.maydell@linaro.org
Convert the ppc CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20221124115023.2437291-14-peter.maydell@linaro.org
Convert the openrisc CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-13-peter.maydell@linaro.org
Convert the nios2 CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-12-peter.maydell@linaro.org
Convert the mips CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-11-peter.maydell@linaro.org
Convert the microblaze CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-10-peter.maydell@linaro.org
Convert the m68k CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-9-peter.maydell@linaro.org
Convert the loongarch CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-8-peter.maydell@linaro.org
Convert the i386 CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-7-peter.maydell@linaro.org
Convert the hexagon CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-6-peter.maydell@linaro.org
Convert the cris CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20221124115023.2437291-5-peter.maydell@linaro.org
Convert the avr CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20221124115023.2437291-4-peter.maydell@linaro.org
Convert the Arm CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20221124115023.2437291-3-peter.maydell@linaro.org
* Fix emulated MVCP and MVCS s390x instructions
* Clean-ups for the e1000e qtest
* Enable qtests on Windows
* Update FreeBSD CI to version 12.4
* Check --disable-tcg for ppc64 in the CI
* Improve scripts/make-releases a little bit
* Many other misc small clean-ups and fixes here and there
-----BEGIN PGP SIGNATURE-----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=u/jz
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-12-15' of https://gitlab.com/thuth/qemu into staging
* s390x PCI fixes and improvements (for the ISM device)
* Fix emulated MVCP and MVCS s390x instructions
* Clean-ups for the e1000e qtest
* Enable qtests on Windows
* Update FreeBSD CI to version 12.4
* Check --disable-tcg for ppc64 in the CI
* Improve scripts/make-releases a little bit
* Many other misc small clean-ups and fixes here and there
# gpg: Signature made Thu 15 Dec 2022 15:05:44 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-12-15' of https://gitlab.com/thuth/qemu: (23 commits)
tests/qtest/vhost-user-blk-test: don't abort all qtests on missing envar
.gitlab/issue_templates: Move suggestions into comments
gitlab-ci: Check building ppc64 without TCG
FreeBSD: Upgrade to 12.4 release
tests/qtest: Enable qtest build on Windows
.gitlab-ci.d/windows.yml: Exclude qTests from 64-bit CI job for now
.gitlab-ci.d/windows.yml: Keep 64-bit and 32-bit build scripts consistent
.gitlab-ci.d/windows.yml: Unify the prerequisite packages
tests/qtest/libqos/e1000e: Correctly group register accesses
tests/qtest/e1000e-test: De-duplicate constants
tests/qtest/libqos/e1000e: Remove "other" interrupts
hw: Include the VMWare devices only in the x86 targets
MAINTAINERS: Add documentation files to the corresponding sections
util/oslib-win32: Remove obsolete reference to g_poll code
util/qemu-config: Fix "query-command-line-options" to provide the right values
scripts/make-release: Only clone single branches to speed up the script
scripts/make-release: Add a simple help text for the script
monitor/misc: Remove superfluous include statements
target/s390x: The MVCP and MVCS instructions are not privileged
target/s390x/tcg/mem_helper: Test the right bits in psw_key_valid()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/virt: Add properties to allow more granular
configuration of use of highmem space
* target/arm: Add Cortex-A55 CPU
* hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
* Implement FEAT_EVT
* Some 3-phase-reset conversions for Arm GIC, SMMU
* hw/arm/boot: set initrd with #address-cells type in fdt
* hw/misc: Move some arm-related files from specific_ss into softmmu_ss
* Restrict arm_cpu_exec_interrupt() to TCG accelerator
-----BEGIN PGP SIGNATURE-----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=YAjF
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20221215-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm/virt: Add properties to allow more granular
configuration of use of highmem space
* target/arm: Add Cortex-A55 CPU
* hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
* Implement FEAT_EVT
* Some 3-phase-reset conversions for Arm GIC, SMMU
* hw/arm/boot: set initrd with #address-cells type in fdt
* hw/misc: Move some arm-related files from specific_ss into softmmu_ss
* Restrict arm_cpu_exec_interrupt() to TCG accelerator
# gpg: Signature made Thu 15 Dec 2022 17:38:36 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20221215-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (28 commits)
target/arm: Restrict arm_cpu_exec_interrupt() to TCG accelerator
hw/misc: Move some arm-related files from specific_ss into softmmu_ss
hw/arm/boot: set initrd with #address-cells type in fdt
hw/intc: Convert TYPE_KVM_ARM_ITS to 3-phase reset
hw/intc: Convert TYPE_ARM_GICV3_ITS to 3-phase reset
hw/intc: Convert TYPE_ARM_GICV3_ITS_COMMON to 3-phase reset
hw/intc: Convert TYPE_KVM_ARM_GICV3 to 3-phase reset
hw/intc: Convert TYPE_ARM_GICV3_COMMON to 3-phase reset
hw/intc: Convert TYPE_ARM_GIC_KVM to 3-phase reset
hw/intc: Convert TYPE_ARM_GIC_COMMON to 3-phase reset
hw/arm: Convert TYPE_ARM_SMMUV3 to 3-phase reset
hw/arm: Convert TYPE_ARM_SMMU to 3-phase reset
target/arm: Report FEAT_EVT for TCG '-cpu max'
target/arm: Implement HCR_EL2.TID4 traps
target/arm: Implement HCR_EL2.TICAB,TOCU traps
target/arm: Implement HCR_EL2.TTLBOS traps
target/arm: Implement HCR_EL2.TTLBIS traps
target/arm: Allow relevant HCR bits to be written for FEAT_EVT
hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
target/arm: Add Cortex-A55 CPU
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When building with --disable-tcg on Darwin we get:
target/arm/cpu.c:725:16: error: incomplete definition of type 'struct TCGCPUOps'
cc->tcg_ops->do_interrupt(cs);
~~~~~~~~~~~^
Commit 083afd18a9 ("target/arm: Restrict cpu_exec_interrupt()
handler to sysemu") limited this block to system emulation,
but neglected to also limit it to TCG.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20221209110823.59495-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The header target/arm/kvm-consts.h checks CONFIG_KVM which is marked as
poisoned in common code, so the files that include this header have to
be added to specific_ss and recompiled for each, qemu-system-arm and
qemu-system-aarch64. However, since the kvm headers are only optionally
used in kvm-constants.h for some sanity checks, we can additionally
check the NEED_CPU_H macro first to avoid the poisoned CONFIG_KVM macro,
so kvm-constants.h can also be used from "common" files (without the
sanity checks - which should be OK since they are still done from other
target-specific files instead). This way, and by adjusting some other
include statements in the related files here and there, we can move some
files from specific_ss into softmmu_ss, so that they only need to be
compiled once during the build process.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221202154023.293614-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "MOVE TO PRIMARY/SECONDARY" instructions can also be called
from problem state. We just should properly check whether the
secondary-space access key is valid here, too, and inject a
privileged program exception if it is invalid.
Message-Id: <20221205125852.81848-1-thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The PSW key mask is a 16 bit field, and the psw_key variable is
in the range from 0 to 15, so it does not make sense to use
"0x80 >> psw_key" for testing the bits here. We should use 0x8000
instead.
Message-Id: <20221205142043.95185-1-thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Update the ID registers for TCG's '-cpu max' to report the
FEAT_EVT Enhanced Virtualization Traps support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For FEAT_EVT, the HCR_EL2.TID4 trap allows trapping of the cache ID
registers CCSIDR_EL1, CCSIDR2_EL1, CLIDR_EL1 and CSSELR_EL1 (and
their AArch32 equivalents). This is a subset of the registers
trapped by HCR_EL2.TID2, which includes all of these and also the
CTR_EL0 register.
Our implementation already uses a separate access function for
CTR_EL0 (ctr_el0_access()), so all of the registers currently using
access_aa64_tid2() should also be checking TID4. Make that function
check both TID2 and TID4, and rename it appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For FEAT_EVT, the HCR_EL2.TICAB bit allows trapping of the ICIALLUIS
and IC IALLUIS cache maintenance instructions.
The HCR_EL2.TOCU bit traps all the other cache maintenance
instructions that operate to the point of unification:
AArch64 IC IVAU, IC IALLU, DC CVAU
AArch32 ICIMVAU, ICIALLU, DCCMVAU
The two trap bits between them cover all of the cache maintenance
instructions which must also check the HCR_TPU flag. Turn the old
aa64_cacheop_pou_access() function into a helper function which takes
the set of HCR_EL2 flags to check as an argument, and call it from
new access_ticab() and access_tocu() functions as appropriate for
each cache op.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For FEAT_EVT, the HCR_EL2.TTLBOS bit allows trapping on EL1
use of TLB maintenance instructions that operate on the
outer shareable domain:
TLBI VMALLE1OS, TLBI VAE1OS, TLBI ASIDE1OS,TLBI VAAE1OS,
TLBI VALE1OS, TLBI VAALE1OS, TLBI RVAE1OS, TLBI RVAAE1OS,
TLBI RVALE1OS, and TLBI RVAALE1OS.
(There are no AArch32 outer-shareable TLB maintenance ops.)
Implement the trapping.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For FEAT_EVT, the HCR_EL2.TTLBIS bit allows trapping on EL1 use of
TLB maintenance instructions that operate on the inner shareable
domain:
AArch64:
TLBI VMALLE1IS, TLBI VAE1IS, TLBI ASIDE1IS, TLBI VAAE1IS,
TLBI VALE1IS, TLBI VAALE1IS, TLBI RVAE1IS, TLBI RVAAE1IS,
TLBI RVALE1IS, and TLBI RVAALE1IS.
AArch32:
TLBIALLIS, TLBIMVAIS, TLBIASIDIS, TLBIMVAAIS, TLBIMVALIS,
and TLBIMVAALIS.
Add the trapping support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
FEAT_EVT adds five new bits to the HCR_EL2 register: TTLBIS, TTLBOS,
TICAB, TOCU and TID4. These allow the guest to enable trapping of
various EL1 instructions to EL2. In this commit, add the necessary
code to allow the guest to set these bits if the feature is present;
because the bit is always zero when the feature isn't present we
won't need to use explicit feature checks in the "trap on condition"
tests in the following commits.
Note that although full implementation of the feature (mandatory from
Armv8.5 onward) requires all five trap bits, the ID registers permit
a value indicating that only TICAB, TOCU and TID4 are implemented,
which might be the case for CPUs between Armv8.2 and Armv8.5.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Cortex-A55 is one of the newer armv8.2+ CPUs; in particular
it supports the Privileged Access Never (PAN) feature. Add
a model of this CPU, so you can use a CPU type on the virt
board that models a specific real hardware CPU, rather than
having to use the QEMU-specific "max" CPU type.
Signed-off-by: Timofey Kutergin <tkutergin@gmail.com>
Message-id: 20221121150819.2782817-1-tkutergin@gmail.com
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=JJjG
-----END PGP SIGNATURE-----
Merge tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru into staging
Miscellaneous patches for 2022-12-14
# gpg: Signature made Wed 14 Dec 2022 15:23:02 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru:
ppc4xx_sdram: Simplify sdram_ddr_size() to return
block/vmdk: Simplify vmdk_co_create() to return directly
cleanup: Tweak and re-run return_directly.cocci
io: Tidy up fat-fingered parameter name
qapi: Use returned bool to check for failure (again)
sockets: Use ERRP_GUARD() where obviously appropriate
qemu-config: Use ERRP_GUARD() where obviously appropriate
qemu-config: Make config_parse_qdict() return bool
monitor: Use ERRP_GUARD() in monitor_init()
monitor: Simplify monitor_fd_param()'s error handling
error: Move ERRP_GUARD() to the beginning of the function
error: Drop a few superfluous ERRP_GUARD()
error: Drop some obviously superfluous error_propagate()
Drop more useless casts from void * to pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/machine*.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-16-armbru@redhat.com>
Tweak the semantic patch to drop redundant parenthesis around the
return expression.
Coccinelle drops a comment in hw/rdma/vmw/pvrdma_cmd.c; restored
manually.
Coccinelle messes up vmdk_co_create(), not sure why. Change dropped,
will be done manually in the next commit.
Line breaks in target/avr/cpu.h and hw/rdma/vmw/pvrdma_cmd.c tidied up
manually.
Whitespace in tools/virtiofsd/fuse_lowlevel.c tidied up manually.
checkpatch.pl complains "return of an errno should typically be -ve"
two times for hw/9pfs/9p-synth.c. Preexisting, the patch merely makes
it visible to checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221122134917.1217307-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 012d4c96e2 changed the visitor functions taking Error ** to
return bool instead of void, and the commits following it used the new
return value to simplify error checking. Since then a few more uses
in need of the same treatment crept in. Do that. All pretty
mechanical except for
* balloon_stats_get_all()
This is basically the same transformation commit 012d4c96e2 applied
to the virtual walk example in include/qapi/visitor.h.
* set_max_queue_size()
Additionally replace "goto end of function" by return.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The SET ADDRESS SPACE CONTROL FAST instruction is not privileged, it can be
used from problem space, too. Just the switching to the home address space
is privileged and should still generate a privilege exception. This bug is
e.g. causing programs like Java that use the "getcpu" vdso kernel function
to crash (see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990417#26 ).
While we're at it, also check if DAT is not enabled. In that case the
instruction is supposed to generate a special operation exception.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/655
Message-Id: <20221201184443.136355-1-thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In get_physical_address, the canonical address check failed to
set TranslateFault.stage2, which resulted in an uninitialized
read from the struct when reporting the fault in x86_cpu_tlb_fill.
Adjust all error paths to use structure assignment so that the
entire struct is always initialized.
Reported-by: Daniel Hoffman <dhoff749@gmail.com>
Fixes: 9bbcf37219 ("target/i386: Reorg GET_HPHYS")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221201074522.178498-1-richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1324
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MMX state is saved/restored by FSAVE/FRSTOR so the instructions are
not illegal opcodes even if CR4.OSFXSR=0. Make sure that validate_vex
takes into account the prefix and only checks HF_OSFXSR_MASK in the
presence of an SSE instruction.
Fixes: 20581aadec ("target/i386: validate VEX prefixes via the instructions' exception classes", 2022-10-18)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1350
Reported-by: Helge Konetzka (@hejko on gitlab.com)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The LPA2 extension implements 52-bit virtual addressing for 4k and 16k
translation granules, and for the former, this means an additional level
of translation is needed. This means we start counting at -1 instead of
0 when doing a walk, and so 'level' is now a signed quantity, and should
be typed as such. So turn it from uint32_t into int32_t.
This avoids a level of -1 getting misinterpreted as being >= 3, and
terminating a page table walk prematurely with a bogus output address.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In get_phys_addr_with_struct(), we call get_phys_addr_twostage() if
the CPU supports EL2. However, we don't check here that stage 2 is
actually enabled. Instead we only check that inside
get_phys_addr_twostage() to skip stage 2 translation. This means
that even if stage 2 is disabled we still tell the stage 1 lookup to
do its page table walks via stage 2.
This works by luck for normal CPU accesses, but it breaks for debug
accesses, which are used by the disassembler and also by semihosting
file reads and writes, because the debug case takes a different code
path inside S1_ptw_translate().
This means that setups that use semihosting for file loads are broken
(a regression since 7.1, introduced in recent ptw refactoring), and
that sometimes disassembly in debug logs reports "unable to read
memory" rather than showing the guest insns.
Fix the bug by hoisting the "is stage 2 enabled?" check up to
get_phys_addr_with_struct(), so that we handle S2 disabled the same
way we do the "no EL2" case, with a simple single stage lookup.
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221121212404.1450382-1-peter.maydell@linaro.org
With LPA2, the effective output address size is at most 48 bits when
TCR.DS == 0. This case is currently unhandled in the page table walker,
where we happily assume LVA/64k granule when outputsize > 48 and
param.ds == 0, resulting in the wrong conversion to be used from a
page table descriptor to a physical address.
if (outputsize > 48) {
if (param.ds) {
descaddr |= extract64(descriptor, 8, 2) << 50;
} else {
descaddr |= extract64(descriptor, 12, 4) << 48;
}
So cap the outputsize to 48 when TCR.DS is cleared, as per the
architecture.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221116170316.259695-1-ardb@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Short queue with a build regression fix when using --disable-tcg.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY3ZP3wAKCRA82cqW3gMx
ZB7uAPwN3C8R0YeL+NR44ZlzJVM75TjT1sDYD3oZjEraIfAz9AD7BKRNMPXmmF3A
sIHlbhVWquFU07ZDq5UmMfa2WudFZgc=
=z2+u
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20221117' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-11-17:
Short queue with a build regression fix when using --disable-tcg.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY3ZP3wAKCRA82cqW3gMx
# ZB7uAPwN3C8R0YeL+NR44ZlzJVM75TjT1sDYD3oZjEraIfAz9AD7BKRNMPXmmF3A
# sIHlbhVWquFU07ZDq5UmMfa2WudFZgc=
# =z2+u
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 17 Nov 2022 10:14:39 EST
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20221117' of https://gitlab.com/danielhb/qemu:
target/ppc: Fix build warnings when building with 'disable-tcg'
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kowshik reported that building qemu with GCC 12.2.1 for 'ppc64-softmmu'
target is failing due to following build warnings:
<snip>
../target/ppc/cpu_init.c:7018:13: error: 'ppc_restore_state_to_opc' defined but not used [-Werror=unused-function]
7018 | static void ppc_restore_state_to_opc(CPUState *cs,
<snip>
Fix this by wrapping these function definitions in 'ifdef CONFIG_TCG' so that
they are only defined if qemu is compiled with '--enable-tcg'
Reported-by: Kowshik Jois B S <kowsjois@linux.ibm.com>
Fixes: 61bd1d2942 ("target/ppc: Convert to tcg_ops restore_state_to_opc")
Fixes: 670f1da374 ("target/ppc: Implement hashst and hashchk")
Fixes: 53ae2aeb94 ("target/ppc: Implement hashstp and hashchkp")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1319
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Kowshik Jois B S <kowsjois@linux.vnet.ibm.com>
Message-Id: <20221116131743.658708-1-vaibhav@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Fix typos (discovered with the 'codespell' utility).
Note: Though "migrateable" still seems to be a valid spelling, we change
it to "migratable" since this is the way more common spelling here.
Message-Id: <20221111182828.282251-1-thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When translating code that is using LAHF and SAHF in combination with the
REX prefix, the instructions should not use any other register than AH;
however, QEMU selects SPL (SP being register 4, just like AH) if the
REX prefix is present. To fix this, use deposit directly without
going through gen_op_mov_v_reg and gen_op_mov_reg_v.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/130
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unlike the memory case, where "the destination operand receives a write
cycle without regard to the result of the comparison", rm must not be
touched altogether if the write fails, including not zero-extending
it on 64-bit processors. This is not how the movcond currently works,
because it is always followed by a gen_op_mov_reg_v to rm.
To fix it, introduce a new function that is similar to gen_op_mov_reg_v
but writes to a TCG temporary.
Considering that gen_extu(ot, oldv) is not needed in the memory case
either, the two cases for register and memory destinations are different
enough that one might as well fuse the two "if (mod == 3)" into one.
So do that too.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/508
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[rth: Add a test case ]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Some implementations (i.e. Loongson-2F) may decide to implement
a 64 bit FPU without implementing COP1X instructions.
As the eligibility of 64 bit FP instructions is already determined
by CP0St_FR, there is no need to check for COP1X again.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221102165719.190378-1-jiaxun.yang@flygoat.com>
[PMD: Add missing trailing parenthesis (buildfix)]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
I don't have access to Octeon68XX hardware but according
to my investigation Octeon never had DSP ASE support.
As per "Cavium Networks OCTEON Plus CN50XX Hardware Reference
Manual" CP0C3_DSPP is reserved bit and read as 0. Also I do have
access to a Ubiquiti Edgerouter 4 which has Octeon CN7130 processor
and I can confirm CP0C3_DSPP is read as 0 on that processor.
Further more, in linux kernel:
arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
cpu_has_dsp is overridden as 0.
So I believe we shouldn't emulate DSP in QEMU as well.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20221031132531.18122-4-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This patch changes condition and function name for enabling
indexed load instructions for Octeon vCPUs. Octeons do not
have DSP extension, but implement LBX-and-others.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <166728058455.229236.13834649461181619195.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As per "Cavium Networks OCTEON Plus CN50XX Hardware Reference
Manual" offset field is signed 16 bit value. However arg_BBIT.offset
is unsigned. We need to cast it as signed to do address calculation.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221031132531.18122-3-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As per an unpublished document, in later reversion of chips
CP0St_{KX, SX, UX} is not writeable and hardcoded to 1.
Without those bits set, kernel is unable to access XKPHYS address
segment. So just set them up on CPU reset.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221031132531.18122-2-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCY2hz5gAKCRBAov/yOSY+
31ESA/9ppQVu70y8AnA/aYCzC6koQxxAsaD/lvwc7M1xzeZnjwOsVnsFLpZITTJj
2+2O/BlEO3uRvAtV6E7Vtu9D/+Cc+HQ7yOFnwbY0jZmePThp3YYtTg6o+2T7/9ya
RMicgny1SYjsOjG8/Uam9+dRbH5QheNFwid0BWFhMts9MDB3Mg==
=zZ8m
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20221107' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20221107
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCY2hz5gAKCRBAov/yOSY+
# 31ESA/9ppQVu70y8AnA/aYCzC6koQxxAsaD/lvwc7M1xzeZnjwOsVnsFLpZITTJj
# 2+2O/BlEO3uRvAtV6E7Vtu9D/+Cc+HQ7yOFnwbY0jZmePThp3YYtTg6o+2T7/9ya
# RMicgny1SYjsOjG8/Uam9+dRbH5QheNFwid0BWFhMts9MDB3Mg==
# =zZ8m
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 06 Nov 2022 21:56:38 EST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20221107' of https://gitlab.com/gaosong/qemu:
target/loongarch: Fix return value of CHECK_FPE
target/loongarch: Separate the hardware flags into MMU index and PLV
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Regarding the patchset v3 has been merged into main line, and not
approved, this patch updates to patchset v4.
Fixes: 2419978c ("target/loongarch: Fix emulation of float-point disable exception")
Link: https://lists.nongnu.org/archive/html/qemu-devel/2022-11/msg00808.html
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Message-Id: <20221107024526.702297-3-wangrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Regarding the patchset v3 has been merged into main line, and not
approved, this patch updates to patchset v4.
Fixes: b4bda200 ("target/loongarch: Adjust the layout of hardware flags bit fields")
Link: https://lists.nongnu.org/archive/html/qemu-devel/2022-11/msg00808.html
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Message-Id: <20221107024526.702297-2-wangrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
We use the .h.inc extension to include C headers. To be consistent
with the rest of the codebase, rename the C headers using the .def
extension.
IDE/tools using our .editorconfig / .gitattributes will leverage
this consistency.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221025235006.7215-4-philmd@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We use the .h.inc extension to include C headers. To be consistent
with the rest of the codebase, rename the C headers using the .def
extension.
IDE/tools using our .editorconfig / .gitattributes will leverage
this consistency.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221025235006.7215-3-philmd@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We use the .h.inc extension to include C headers. To be consistent
with the rest of the codebase, rename the C headers using the .def
extension.
IDE/tools using our .editorconfig / .gitattributes will leverage
this consistency.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221025235006.7215-2-philmd@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Fix regression booting Trusted Firmware
* Honor HCR_E2H and HCR_TGE in ats_write64()
* Copy the entire vector in DO_ZIP
* Fix Privileged Access Never (PAN) for aarch32
* Make TLBIOS and TLBIRANGE ops trap on HCR_EL2.TTLB
* Set SCR_EL3.HXEn when direct booting kernel
* Set SME and SVE EL3 vector lengths when direct booting kernel
-----BEGIN PGP SIGNATURE-----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=Fcb4
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20221104' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Fix regression booting Trusted Firmware
* Honor HCR_E2H and HCR_TGE in ats_write64()
* Copy the entire vector in DO_ZIP
* Fix Privileged Access Never (PAN) for aarch32
* Make TLBIOS and TLBIRANGE ops trap on HCR_EL2.TTLB
* Set SCR_EL3.HXEn when direct booting kernel
* Set SME and SVE EL3 vector lengths when direct booting kernel
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmNk+KkZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vUsD/9SYZP3ne2OZxBe8he98jJ5
# 6apODiBksBLUM+1bKEoYW8Kw4XpS10I1Tbnxe7n0bNAfIiZlsZ7HJAJaYWy4MX4k
# Bq0v1EIFo+Obumocc14ZzWcw9yPpHOGavKHXfPxTtIw0amtOmh3aMBPuOZKiMSaq
# TdI/8654DbAOY3Hp/r6WnXwEgAc23kx/PtGhQFdU4iWhzTdeQeFkgCCsVMO02zFQ
# ZM4wiAATpfNfgf5+Wxoin6RQ8nI9PF+Xf7HhN3d1CiXju3vOl+geYNkubJzIopv1
# itLcnvduYE6+5oJsnXZ4FDNO6/nnqWRNqtyDf0/NjLROfj84BPJpZqMX+FR6Q0I0
# d+4/oEw4A46qfaS5b4/YelbJOiUgiViWU1Xs3g2dkeTMT8CyGfDrJ2HRDKN7AaHo
# llL7s1calkX2oSs+gU0BAw8xRETGwMBSOpF6JmPVh277LjvWfN1vsJzVUG3wrSXL
# G7qa2h+fHV5Xu876sc/i0+d4qHuqcE/EU86VQ6X40f+dRzN02rkSCPAxzGFwLXOr
# 8fl5MsX6z5pqcubnzxkhi66ZHc6fXsvtUjKBxyrVpMyjMlV9PTJ2Q1RCgVctErXk
# lDzsLuplzPSjZBy3Peib/rLnmYUxJHyPe0RFYIumzZv/UHwL4GjZgkI842UVBpAL
# FvIGblcCXHhdP4UFvqgZhw==
# =Fcb4
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 04 Nov 2022 07:34:01 EDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20221104' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: Two fixes for secure ptw
target/arm: Honor HCR_E2H and HCR_TGE in ats_write64()
target/arm: Copy the entire vector in DO_ZIP
target/arm: Fix Privileged Access Never (PAN) for aarch32
target/arm: Make TLBIOS and TLBIRANGE ops trap on HCR_EL2.TTLB
hw/arm/boot: Set SCR_EL3.HXEn when booting kernel
hw/arm/boot: Set SME and SVE EL3 vector lengths when booting kernel
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reversed the sense of non-secure in get_phys_addr_lpae,
and failed to initialize attrs.secure for ARMMMUIdx_Phys_S.
Fixes: 48da29e4 ("target/arm: Add ptw_idx to S1Translate")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1293
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to check HCR_E2H and HCR_TGE to select the right MMU index for
the correct translation regime.
To check for EL2&0 translation regime:
- For S1E0*, S1E1* and S12E* ops, check both HCR_E2H and HCR_TGE
- For S1E2* ops, check only HCR_E2H
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Message-id: 20221101064250.12444-1-ake@igel.co.jp
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With odd_ofs set, we weren't copying enough data.
Fixes: 09eb6d7025 ("target/arm: Move sve zip high_ofs into simd_data")
Reported-by: Idan Horowitz <idan.horowitz@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221031054144.3574-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we implemented the PAN support we theoretically wanted
to support it for both AArch32 and AArch64, but in practice
several bugs made it essentially unusable with an AArch32
guest. Fix all those problems:
- Use CPSR.PAN to check for PAN state in aarch32 mode
- throw permission fault during address translation when PAN is
enabled and kernel tries to access user acessible page
- ignore SCTLR_XP bit for armv7 and armv8 (conflicts with SCTLR_SPAN).
Signed-off-by: Timofey Kutergin <tkutergin@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221027112619.2205229-1-tkutergin@gmail.com
[PMM: tweak commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The HCR_EL2.TTLB bit is supposed to trap all EL1 execution of TLB
maintenance instructions. However we have added new TLB insns for
FEAT_TLBIOS and FEAT_TLBIRANGE, and forgot to set their accessfn to
access_ttlb. Add the missing accessfns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
