* in load_image_internal(), elf32_load_user_image checks whether the binary
format requires the compatibility mode.
* we then set up the flag THREAD_FLAGS_COMPAT_MODE and the address space size.
* the compatibility mode runtime_loader is hardcoded with x86/runtime_loader.
* if needed, the 64-bit flat_args structure is converted in-place to its 32-bit
layout.
* a 32-bit flat_args isn't handled yet (a 32-bit team execs a 64-bit binary).
Change-Id: Ia6a066bde8d1774d85de29b48dc500e27ae9668f
* define compat_area_info to be used when applicable in
compatibility mode.
* handle 32-bit types in _user_reserve_address_range(), _user_get_area_info(),
_user_get_next_area_info(), _user_transfer_area(), _user_clone_area(),
_user_create_area(), _user_map_file(), other syscalls are compatible as is.
* _get_next_area_info() doesn't work well with a 32-bit address cookie (address
could be in 64-bit range). Instead use _compat_get_next_area_info() which uses
the area id as cookie, though the areas are not ordered by address any more.
Change-Id: Ic7519ca8824aa2d534b0f03ea75a1bf6ae321535
* handle 32-bit types in _user_send_signal(), _user_sigaction(), _user_sigwait(),
_user_set_signal_stack(), _user_restore_signal_frame(), other syscalls are
compatible as is.
Change-Id: I4c8dc47bfa80f36e363d444d2a5a7be6c621606d
* define compat_image_info, compat_extended_image_info
to be used for respective 32-bit types of syscalls in compatibility mode.
* handle 32-bit types in _user_register_image, _user_get_image_info,
_user_get_next_image_info, other syscalls are compatible as is.
Change-Id: Ibbd33e6796208dfa70d869e36bf745bc3e18d330
* define compat_flock, compat_timespec, compat_stat, compat_attr_info,
compat_fs_info, compat_fd_info to be used for respective 32-bit types
of syscalls in compatibility mode.
* handle 32-bit types in common_fcntl(), _user_read_stat(), _user_stat_attr(),
_user_read_index_stat, _user_read_fs_info, _user_write_fs_info,
_user_get_next_fd_info, other syscalls are compatible as is.
Change-Id: I5b372169fe142f67b81fd6c27e0627d5119ba687
This reverts commit 4f059c1fc5.
From discussion on the mailing list, it seems I was correct the first time
and Broadwell is Gen8. The confusion comes from the SER5/SOC distinction,
which is not in the Linux driver, and I still don't know which one it really
belongs in.
* File locks created by flock should only apply for the file descriptor
that was used to lock the file. Another fd on the same file should then
be denied access (calling flock should fail).
* fcntl based locks, however, are in a separate namespace and are global
to a team.
* This issue was found when running webkitpy test suite, and should close
ticket #13795.
* Don't use session or team as comparison in release_advisory_lock(), as
that information might not be available anymore (e.g. when called from
Team::~Team()). This fixes#14121.
Change-Id: I9efb96cfcefe7e72b0060220c635a665e7e643cc
Co-authored-by: Axel Dörfler <axeld@pinc-software.de>
* GCC7's static analysis found this one and it still
took #gcc and me a while to spot. Nice work gcc7!
* Should help DisplayPort training issues :-)
Change-Id: I9b47f13c95e622a2c08ff329ec9c3fc7e3db493d
* x86 uses a commpage with 32-bit addresses, incompatible with the one used for
x86_64. For this reason, a compatibility commpage is needed to support a 32-bit
userland on x86_64.
* define ADDRESS_TYPE as a macro for addr_t (default) or uint32 (for the 32-bit
commpage).
* team_create_thread_start_internal() will use clone_commpage_area() with
KERNEL_USER_DATA_BASE or clone_commpage_compat_area() with
KERNEL_USER32_DATA_BASE, to setup the correct commpage.
* real_time_clock (in compatibility mode) also updates the compatibility
commpage with real time data.
Change-Id: I61605077ce0beabab4439ef54edd1eae26f26fd2
* define ELF32_COMPAT to enable ELF32 macros.
* add a flag ELF_LOAD_USER_IMAGE_TEST_EXECUTABLE to only check the format.
It will be used by load_image_internal() to check which mode to use when
loading an image.
* in arch_elf_relocate_rel(), switch to elf_addr instead of addr_t, which
would be the wrong size for elf32 on x86_64.
* the ELF compat loader reuses the relevant parts of elf.cpp and arch_elf.cpp,
excluding for instance load_kernel_add_on() or dump functions.
Change-Id: Ifa47334e5adefd45405a823a3accbd12eee5b116
* also adjust BOOT_GDT_SEGMENT_COUNT for x86, the definition is used by the
boot loader.
* add some 32-bit definitions.
* add a UserTLSDescriptor class, this will be used by 32-bit threads.
Change-Id: I5b1d978969a1ce97091a16c9ec2ad7c0ca831656
the size of BAffineTransform is architecture dependent, so we transmit
its contents in a standard array instead.
Change-Id: I907110742168846a869a48bb2d116cc5292ec7d0
* free interrupts, free queues, return to init state.
* this will be used by virtio_net on interface uninit.
Change-Id: I7c1e6facc37cf6bfe19628576fdf2c0bac9e5c38
* enable to iterate on available entries in one interrupt call.
* negociate -> negotiate, (void *) -> (void* ), thanks axel and philippe!
Change-Id: Ie2d290797abcbf4c0f3cb5bfff71d091bb800fa6
It was limited to a uint32 and could for example be overflown by the
slab MemoryManager that uses size_t on a 64 bit system.
This aligns the signature with create_area() that already uses size_t
for the size argument.
Note that the function is currently private, so the impact should be
limited.
John's revert of my removal commit dragged back a bunch of cygwin/sunos
cruft, as well as re-adding RegExp.cpp to the host libshared, that we don't
need.
Instead, remove this and add libgnuregex_build to just the tools/keymap
link alongside the FreeBSD gnuregex case.
* At this point we want to avoid the user calling the callbacks
in the form of BMediaConnection. Instead we force to use the
BMediaInput and BMediaOutput versions.
TypeHandler:
- Add name field for presentation purposes. Adapt subclasses accordingly.
TypeHandlerRoster:
- Add methods to count and retrieve all type handlers for a given type,
and adjust CreateValueNode to allow for passing in an explicit handler.
Adjust callers accordingly.
VariablesViewState:
- Add helpers to store an explicitly chosen type handler for a node.
TypeHandlerMenuItem:
- ActionMenuItem subclass that takes care of reference management
for its contained type handler.
VariablesView:
- Add context menu for choosing type handlers if applicable. Implement
support for invoking said type handlers in a similar manner to explicit
typecasts.
- Adjust saving/restoring the view state so that hidden nodes are taken
into account as well. This is necessary since it may be the case that
the handler had to be applied to the hidden child rather than the visible
node (i.e. the BMessage handler when applied to a pointer to a BMessage).
All together, these changes allow choosing to switch between views of a type
when the Debugger has multiple handlers for it. For example, for BMessages
this allows switching between displaying the raw underlying structure vs
the decoded message content.
SMAP will generated page faults when the kernel tries to access user pages unless overriden.
If SMAP is enabled, the override instructions are written where needed in memory with
binary "altcodepatches".
Support is enabled by default, might be disabled per safemode setting.
Change-Id: Ife26cd765056aeaf65b2ffa3cadd0dcf4e273a96
The scheduler uses the load tracking logic to compute the load of
threads to be enqueued into the run queue. The time delta between the
last enqueue and the next enqueue may grow very large for threads
that mostly wait on conditions. In such cases the int "n" period count
variable would become too small and wrap around, leading to an
assertion failure.
For this to happen, the thread in question would have to have slept for
at least ~25 days and then wake up. Threads often affected would be ones
waiting for some other process to end, for example shell threads waiting
for a long running process to exit.
Fixes#13558.
Following recent changes to use libroot_build on Haiku also, it is now
actually impossible to build Haiku components on non-Haiku platforms
(BeOS R5, Dan0, BONE, Zeta), so we can remove any logic related to this.
This is only the first part; still to be removed are:
* SetSubDirSupportedPlatformsBeOSCompatible
* HOST_PLATFORM_BEOS_COMPATIBLE
* TARGET_PLATFORM_BEOS_COMPATIBLE
It was needed on macOS for a time when BUrl used regexes for parsing.
Now it does not, and so we can remove libshared's RegExp from build
libshared, and thus also libgnuregex.
The feature gives user ability to choose the position of notifications
out of Follow Deskbar, Lower Right, Lower Left, Upper Right and Upper
Left. Fixes#9749 - Notification_Server: add the ability to choose the
position of notifications (easy).
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
The base VMCache class changed to the generic_ types with their
introduction in in *2011* (435c43f591),
but these classes were never properly adapted. These functions should not
be called here (they panic() -- but the base class only returns B_ERROR,
so that is a difference at least.)
Found by Clang's -Woverloaded-virtual.
* Expects its config files in /boot/home/test_launch.
* Uses standard I/O, and is always in user mode.
* Also added test_launch_roster command that is able to talk to the test
server like it does to the real thing.
Fixes#13733.
Unlike written in the ticket, the string length is 136 (not 135),
and the code checks for rejects anything greater or equal to the max
value. So set the constant to 137.
At present, does not work (it fails to properly set up interrupts,
resulting in thousands of unhandled ones which all but grinds the system
to a halt) but this at least is some progress.
Accelerant interface:
Introduce new hooks B_SET_BRIGHTNESS and B_GET_BRIGHTNESS. Brightness is
a float in the 0..1 range.
App_server:
Forward brightness things between BScreen and the accelerant.
intel_extreme:
Implement the hooks. Note that this only works for laptop panels, but
the driver will pretend to support it in other cases as well.
Screen preferences:
If the accelerant supports the B_GET_BRIGHTNESS hook, allow to set
brightness with a slider. Otherwise, the slidere is hidden and these
changes aren't visible.
The UDP service does not own the UDP sockets. When shutting down,
inform the bound sockets that the service is no longer available.
This allows subsequent method calls to error out cleanly.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
Add a cleanup function net_stack_cleanup() that calls a new NetStack::ShutDown() method.
Make sure this method works even if the network stack was never initialized.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
Was nothing but a slightly-stripped version of the nvidia driver,
not touched substantially in nearly 10 years, and the cards it was
originally going to support (but never got anywhere near so) have long since
been deprecated.
All of its prior functionality has been moved into HaikuControlLook.
This paves the way for customizeable control looks, which I intend to implement
in the future as part of decorators.
This is being pushed now because libbe ABI was already broken due to the
Notifications changes, so this is riding that so we only have to do a mass
rebuild once.
* Caching these values could result in missed
state changes.
* We may want to re-implement later.
* Highlights that all DP AUX communication is broken
during my testing.
Notifications preflet:
-Use sliders instead of text fields for width and timeout
-Remove icon size choice (mini icon looks horrible)
-Consolidate both "Enable" checkboxes into one
-Fix Revert button, remove Apply button, add Defaults button
-All changes to settings saved immediately
-Live example notification message shown when settings changes are made
-Add setting for individual apps to specify whether their notifications
should be muted
-Remove history list (to be implemented later)
BNotification class:
-BNotification records the signature and name of application that
created it
-New functions to get source application signature and name
Notification Server:
-Notification pop up view layout fixes and bold font size fix
-Remove notifications history from AppUsage class (will be saved in
cache instead)
-Remove vector of NotificationView objects which isn't needed
-Get source application info from notification object, not the received
message which is not reliable
* Use BDateFormat::GetDayName() to fetch weekday names.
* Use appropriate symbol width(Mon, Mo, M) depending on the frame width.
* Provide functionality to update day name header in case of locale
preferences change.
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
* stop the extractor processing before deleting the source.
* crash happened in MediaPlayer FilePlaylistItem::_CalculateDuration().
* was a regression introduced in hrev50671.
* fixes#13156.
* Issue: In BCalendarView presently, there is no notion of a current date
and the current date is not highlighted. So in the deskbar tray calendar
which uses BCalendarView, we cannot know the current date once we change
the selected day.
* Fix: Make BCalendarView accept pulse messages, check for system date
with every pulse message and update the current date accordingly.
Highlight the current date by rendering its day number text in a
different color.
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
ticket : #13592
* Eventually BoardSetups and target boards will go away.
* Include all known fdt's in the mmc image
* This gets us closer to target board-less arm
* Changing hardware is as simple as plugging a new fdt
into u-boot's startup script.
* Drop my original rpi1 work. We're targetting ARMv7
minimum.
Thus, BeOS compatibility is preserved (and there is no risk of
breaking GCC5<->GCC2 interoperation on hybrid builds.)
This commit only makes the actual change, the build fixes are
in the next commit.
This allows the loader to skip BFS partitions that don't contain
a bootable system. Useful when you have a BFS data partition that
comes before the system partition when iterated over.
Currently, only the UEFI loader actually returns more than one
possible partition.
BFont::Blocks is now implemented in ServerFont, via a call through the
app_server. It uses fontconfig to iterate through a charset of a font
and stores the defined blocks in a bitmap.
A new API was added, BFont::IncludesBlock, that will allow for arbitrary
testing of a given Unicode block. Since nothing is cached, searching
through an entire charset for a series of Unicode blocks can be quite
slow. In a given block there may be only 1 or 2 characters actually
defined so every character within a block needs to be checked until one
is found, which in a degenerate case will mean the entire block is
checked.
Signed-off-by: Axel Dörfler <axeld@pinc-software.de>
* This allows KPath to not allocate a buffer when initialized
without path.
* Added test cases for this.
* Added test for LockBuffer().
* Enhanced tests to allow building them in debug mode.
* Moved calling vfs_normalize_path() into own private method.
* Improved error codes; B_NO_MEMORY is now only returned if the
allocation actually failed.
* If used with LAZY_ALLOC, Path() and LockBuffer() are now allowed
to return a NULL path.
When both Backgrounds and Screen are open, if the workspace color is changed
in Backgrounds the monitor preview in Screen will now refresh to the new color.
Also added a BAlert in BackgroundsView.cpp when failing to change the
background image.
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Fixes#13286.
* It's very important to use a negative value to identify
non valid or uninitialized connections. Additionally, it's preferred
to don't interfere with media_kit types as long as the framework use
it in the backend.
* Add special handling for reading the BEOS:TYPE attribute to supply
on-the-fly fake MIME types for FUSE module filesystems, the same
way it's done in our FAT and NTFS FS modules
* Reuse the mime_ext_table which we already have and put it into a
shared location so we don't get further extra copies of it
* Add a way for a FUSE module to supply Haiku-specific extensions.
This allows it to integrate better with Haiku while only requiring
minimal changes on the FUSE module itself.
* For now, there is only one extension: another function pointer for
"get_fs_info", which lets the FUSE module fill in an fs_info struct.
FUSE provides no good way to otherwise communicate extra information,
such as the volume flags (e.g. B_FS_IS_SHARED).
* A FUSE module can signal that it supports the Haiku extensions by
a) defining HAS_HAIKU_FUSE_EXTENSIONS before including the fuse
headers
b) setting the global variable gHasHaikuFuseExtensions to 1 in
its initialization
Otherwise, the Haiku extensions are completely invisible to the
FUSE module.
Update all in-tree consumers of the BJson API to match. Also added
const-qualifiers to the BString versions of the API, and added the leading
"_" to the header guards.
... reverse this to avoid confusion, you'll see why in next commit.
No functional change intended in this commit, functional change is in the
next commit.
This is an implementation of pthread barriers pursuant to the relevant specification.
Barriers are essentially a special case of conditional variables,
such that all threads waiting on one are woken up when the number of
waiters reaches a number provided at the initialization of the barrier.
In view of that, this implementation mimics the implementation of pthread_cond,
except it is more specialized and self-contained.
Signed-off-by: Jérôme Duval <jerome.duval@gmail.com>
* Fixes problems with setting the partition name after uninitializing
a partition in DriveSetup. Previously, UninitializeJob() was
followed by SetStringJob(), but the kernel was updating the
change counter for the parent partition when uninitializing a
partition, leading to SetStringJob() having an incorrect change
counter for the parent partition. Now the parent change counter
will be correct when SetStringJob() runs.
* Also defer signals while registering fork hooks.
* While malloc provides fork heap hooks which lock the heaps and unlock/reinit,
malloc_debug provides empty hooks.
* Ideas suggested by Ingo, patch reviewed by him. Thanks a lot!
* Also call fork parent hooks on failure.
* Solve locks-up when combining multithreading and process forking, should help
with #13111.
* There's no need to supply ways to mismatch the buffer duration
and size. Anything should reflect the media_format, this is at least
fixed on API level.
* There's no point actually in providing BTimeSource dependant
functionality. If and when there will be need for something like
that, possibly never, an higher level solution will be integrated.
Team:
- Adjust report generation event to include a final status code for listeners.
CliContext,TeamWindow,ReportUserinterface:
- Use aforementioned status code to indicate whether report generation
succeeded or failed.
DebugReportGenerator:
- Notify listeners if report generation fails. This may have previously
been responsible for some bug reports where it was indicated that the
debugger hung without exiting after being asked to save a report from
a crashed app.
- When dumping disassembly, retrieve it directly if necessary rather than
requesting it via the user interface listener. This also fixes the quirk
that requesting to save a crash report while looking at the source code
of a function would trigger switching it to disassembly visually.
- When walking the list of threads to dump, acquire references to all of
them before starting. Otherwise, it was potentially possible for a running
but not crashed thread to exit while we were generating the report, leaving
us with a pointer to a deleted thread. This was most likely the cause of one
of the crashes reported in #13082.
- When receiving the notification that source code state has changed, clear
the waiting function. Otherwise, it was potentially possible for us to get
other state change notifications, leading to the data semaphore being
released too often. This would then cause later potential waits such as
the stack frame memory dump to not actually wait when they should,
potentially leading them to dereference objects that weren't yet ready.
This fixes another of the crashes in #13802.
- Split MessageCodes.h into a second file that separates out the
application-specific message codes from those used by the core.
Adjust includes accordingly. No functional change.
* The idea is to move the callback based mechanism into a derived
class. The objects can be composed to create working systems.
* The BMediaClient class supply RegisterInput/RegisterOutput
and BeginInput/BeginOutput is moved to BSimpleMediaClient.
* Various minor fixes.
* Capabilities() become Kind()
* Use media_client and media_connection to better model
the different situations of the API. Reduce code duplication
and move media_kit structs/methods into private.
* Various API and beauty improvements.
* Introduce id management for media_connections.
* Fix different issues preventing to correctly begin a connection.
* Those structs are provided as replacement for the classic
media_kit ones. They provide better encapsulation of the data
and the resulting code is heavily simplified. It's planned to
introduce BMediaRoster functions to provide conversion from
media_node and media_input/media_output to media_client
and media_connection.
FunctionInstance:
- Add new state FUNCTION_SOURCE_SUPPRESSED. This signals that the user
explicitly forced disassembly to be loaded despite source code being
available.
LoadSourceCodeJob:
- When forced to disassembly, use the above suppressed state accordingly.
SourceView/TeamWindow/TeamDebugger:
- Adjust to take new state into account as needed.
TeamDebugInfo::GetActiveSourceCode:
- When looking at a function to decide whether to return line information
based on source or disassembly, first examine the source code state. If
the source has never been loaded for that function, but we have it available,
set it on the function at that point. This lazily addresses the fact that
LoadSourceCodeJob is called on behalf of a specific function, and
consequently only sets the source code onto that function, and not all others
present in the same file. This allows us to differentiate between the case
where a function doesn't have source code available at all, versus a function
that has simply been forced to disassembly view at this point in time.
The primary symptom of the above issue was that attempting to set a breakpoint
outside of the currently active function, but within the same file would result
in the breakpoints view indicating that the breakpoint was at line 0 rather
than the appropriate line, and breakpoints would also not be drawn in the
source view for such locations.
Thanks to Humdinger for the heads up!
Chunks may be physically contiguous, but virtually disjoint. Adding
physical addresses may cause ranges to be merged incorrectly.
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
* The BMediaClient is an higher level API to the media_kit. It
corresponds to what the layout API was for the interface_kit.
The main idea is to allow the developer concentrate only on
higher level details and avoiding handle with the tricky parts
of the media_kit. At the same time the general purpose node that
is implemented inside would allow implementing the best techniques
around thus at the same time reducing code duplication and increasing
efficiency.
* BMediaClient is WIP, this is the initial merge of the branch.
The initial development stone was set long time ago and walked
through various design/implementation phases.
* Ideally we should support this feature by default to allow
future improvements to the plugins management.
* Fixes the major memory corruption that lead to various
crashes on exit in MediaPlayer.
* beaglebone vs beagleboard
* While the boards are almost the same, they have
diff. FDT's now (more memory, different layout etc)
* Make u-boot script more rpi-like
(depend on u-boot for initial addresses)
* Wasn't working, still doesn't.
* Now pulling in latest amdgpu atombios.h headers
* Lots of DisplayPort cleanup and removal of legacy stuff
* Add obsolete atombios header for things that disappear
(amdgpu doesn't support older cards like we do)
* Introduce new code to support later encoder tables
* Drop radeon-specific encoder service from common dp_info
* Tested on HD 5450 hdmi
* Helps prevent mainboard explosions and other bad stuff.
* ...maybe not explosions, but bad things.
* The RX 480 reference design can pull as much as 90W
from its PCIe slot at load. PCIe is rated for 75W.
* This change overloads the PCIe power cables vs the PCIe
slot. The PCIe power cables can handle going over spec.
* Untested since we really can't come close to loading a
RX 480 without hardware OpenGL ^_^
* Should be able to test on real hardware within a week.
- Add new interface TeamFunctionSourceInformation. Currently this
exposes a single function allowing one to query for the currently
active source code given a FunctionDebugInfo instance.
- Implement TeamFunctionSourceInformation on TeamDebugInfo.
- Pass TeamFunctionSourceInformation to Dwarf{Team,Image}DebugInfo.
In turn, make use of it in DwarfImageDebugInfo::GetStatement() in
order to determine whether to return the corresponding assembly
or source statement.
With this piece of information, the debugger is now correctly able to
determine that the user is currently looking at disassembly despite debug
info being available, and consequently adjust its stepping behavior based on
that. Previously, the source code statement was always used, leading to it
not being possible to single step assembly lines in such a circumstance
without manually using run to cursor.
Other related cleanups:
- TeamDebugInfo now inherits BReferenceable directly, rather than relying on
indirectly inheriting it from TeamTypeInformation.
- Remove BReferenceable from TeamTypeInformation. The latter is only an
interface anyways, and inheriting that base class from multiple locations
was causing GCC5 trouble when resolving BReference<TeamDebugInfo>, even
when virtual inheritance was used.
The HashMap constructor was called before the heap is initialized,
ending up calling malloc from the OpenHashMap constructor.
Oddly it was still working on x86 but broke other platforms.
Instead we add a Lookup() static method to Partition,
which by default walks gPartitions for the id,
and recursively calls itself on the children lists.
This means we must add a partition even temporarily to gPartitions
before Scan()ing it though.
Signed-off-by: François Revol <revol@free.fr>
* Only set HAIKU_BOOT_PLATFORM to bios_ia32 if not defined
* Add gnuefi build feature
* Introduce BOOT_LDFLAGS, and move options for passing to linker
into ArchitectureSetup
* x86_64 compile fixes for warnings in boot loader
* loader/elf.cpp: don't include ELF32 support when targeting EFI
* relocation_func.cpp: copy of the relocation code from gnuefi
to make _relocate extern "C", and avoid including <efilib.h>
* boot_loader_efi.ld: copy of gnuefi's elf_x86_64_efi.lds,
modified to include support for C++ constructors, etc. Keep in
sync with the gnuefi package
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
There was some mixup with the interrupt registers, still:
- The driver uses 16-bit read/write, but on SandyBridge the register is
32 bits
- There is a global interrupt enable bit, which must be set to unmask
everything else
- The bits for vblank interrupt are not the same on SNB and later PCH
based devices, and the code mixed the two.
Move the computation of the interrupt bits to an helper function, and
use it everywhere to make sure we always use the right bits.
Modesetting
===========
My previous hack was setting the transcoder registers, instead of the
display ones. Do that the way it is designed in the driver instead:
- If there is a transcoder, set its registers, but do not set the
display timings. The display will remain set at its native (and only)
resolution, and panel fitting will adjust the output of the transcoder
to match.
- If there is no transcoder, set the display registers directly to the
native resolution, as it was done on previous generation devices.
- fPipeOffset hacks no longer needed
DPMS
====
It seems the panel control register is not readable on PCH? Anyway, the
code would loop forever waiting for the bit to become unset when turning
the display off. Waiting seems to not be needed, so just remove it as
well as the "unlock" bit, which does not work for me and results in a
black screen.
Remaining hacks
===============
I still need to force HEAD_MODE_A_ANALOG to get output on pipe B (LVDS
display) working. I suspect something is common to the two pipes or not
allocated to the right one.
This version will have less side effects on other generations and help
with getting things to work on SandyBridge and possibly later devices.
Please test and report.
Add an Icon() and SetIcon() method. Override SetMarked() to set the
parent menu field icon.
Don't move the label right if icon is NULL. Make the first menu item
an IconMenuItem with a NULL icon. This allows the icon to draw in the
closed menu state.
icon gets updated even if you select an item in a submenu
http://insightfactory.tumblr.com/image/142366356207
* Make the color box a rectangle with proportions of golden ratio.
* Override GetContentSize() to make menu item area larger.
* Label should never truncate since I make sure there is enough room.
* Draw the label using BMenuItem parent class
* Carefully adjust the spacing so that there is an attractive amount of
padding between the checkmark and color box and the color box and label.
Add _AddMenu method to BMenuField that adds BColorMenuItem as its
base menu item. This shows the BColorMenuItem in the closed state.
Create BPrivate::MenuItemPrivate
Add a SetSubmenu() method to MenuItemPrivate that gives you
the ability to add a submenu after creating the object. This
method should be public
Skip disabled items
Color gets updated even if you select an item in a submenu
Architecture:
- Store and provide accessor for the size in bytes of the low-level
debug_cpu_state size of the respective target CPU. Adjust subclasses
to pass in the appropriate size information.
* Detect PCH model based on ISA bridge and save
into shared info for later use.
* On CougarPoint PCH systems, assign pipes via
special CPT registers
* Drop HasPlatformControlHub as PCH should be
based on more than just generation.
UserInterface:
- Add Clone() function to set of required virtuals. This asks the subclass
to create a new instance of its respective type.
{CommandLine,Graphical,Report}UserInterface:
- Implement the above function.
TeamDebugger:
- Add accessor for the currently active UI.
TargetHostInterface:
- Set correct request type when setting up the options for a team restart.
- Ask the TeamDebugger for its user interface and clone it in order to fill
in that aspect of the debug options. This fixes a regression introduced in
commit 880a64, which inadvertently resulted in team restarts no longer
working.
* Wait evaluation is done considering both position
and buffer size.
* Set back position to 0 after seeking.
* Simplify EvaluatePosition to take advantage of inheritance.
* Use back position to determine the current size of the buffer.
* Add more debug tracing.
* Other minor fixes.
* Implement Open/Close mechanism.
* Implement SetBuffer.
* Implement timeout handling.
* Improve Seek mechanism, this is now working by locking the
thread until the backend call SeekCompleted.
* Moved data locking in the internal buffer class, includes handling
of backend writes.
* Takes advantage of inheritance for getting the size. The choice is
made depending on the flags. This allow the implementer to easily
return a custom size by reimplementing GetSize. At the same time
a plain BAdapterIO can still have it's total size set, but the behavior
will change depending it's mutable or not.
* Some decisions are now made by considering everything in absolute
values.
* Other minor fixes.
* This is by default provided using a relative buffer. When the
client request a seek over the range we currently have, we will
ask the backend with a SeekRequested. When the backend operation
ended successfully, the client is required to call SeekCompleted
before to return. This will cause the offset to change and the
buffer is cleaned as result. Next data received will be considered
to be at a position equal to the offset plus the relative position.
- Add subfolder src/kits/debugger which contains the debugger's core
functionality and lower layers. Correspondingly add headers/private/debugger
for shared headers to be used by clients such as the Debugger application
and eventual remote_debug_server. Adjust various files to account for
differences as a result of the split and moves.
- Add libdebugger.so to minimal Jamfile.
* This class is provided as a safe multithreaded communication channel
between a BMediaIO-like interface and a Read/Write backend.
* Includes internal buffering and can be used to provide multithreaded
edit of the data.
* Current limitations include missing BOutputAdapter and
correct timeout handling.
* Future plans provide a BRemoteAdapterIO that using ports
and areas allow to easily send big data between processes.
- Messages that expect a reply are now tagged with a unique ID field to
indicate that expectation to the receiving socket messenger.
- The messenger now maintains a map of received reply IDs and their
corresponding messages, along with a message queue of other unsolicited
replies.
- After successfully connecting, the messenger now spawns a thread
whose sole responsibility is receiving and parsing all incoming messages,
and consequently sorting them into the aforementioned data structures based
on the presence of the reply ID. Callers who are awaiting either replies or
other messages are signalled appropriately via a semaphore. This allows
multiplexing of both types of messages on the same socket.
- Introduces new network API class BSocketMessenger, allowing one to send
and receive BMessages across a network socket in a BMessenger-like
fashion. Still very much WIP, hence currently not exposed via public headers.
Based partly on previous work by Axel.
* Add function core_dump_write_core_file(). It writes a core file for
the current thread's team. The file format is similar to that of
other OSs (i.e. ELF with PT_LOAD segments and a PT_NOTE segment), but
most of the notes are Haiku specific (infos for team, areas, images,
threads). More data will probably need to be added.
* Add team flag TEAM_FLAG_DUMP_CORE, thread flag
THREAD_FLAGS_TRAP_FOR_CORE_DUMP, and Team property coreDumpCondition,
a condition variable available while a core dump is progress. A
thread that finds its flag THREAD_FLAGS_TRAP_FOR_CORE_DUMP set before
exiting the kernel to userland calls core_dump_trap_thread(), which
blocks on the condition variable until the core dump has finished. We
need the team's threads to stop so we can get their CPU state (and
have a generally unchanging team state while writing the core file).
* Add user debugger message B_DEBUG_WRITE_CORE_FILE. It causes
core_dump_write_core_file() to be called for the team.
* Dumping core as an immediate effect of a terminal signal has not been
implemented yet, but that should be fairly straight forward.
Similar to arch_get_debug_cpu_state(), but the thread whose CPU state
to retrieve is specified. Works only for threads that aren't running,
and on x86-64 we can get the FPU state only when the thread was
interrupted in userland.
Not implemented for the incomplete architecture ports.
This resolves a TODO: We used thread_interrupt() to wake up the thread
from an interruptable wait. However, if the thread was already in the
kernel and about to start waiting, that would have no effect and the
thread would wait anyway. Now there's the new non-blockable signal
SIGNAL_DEBUG_THREAD, which is sent to the thread instead, making sure
that thread doesn't start waiting.
* New Intel SkyLake seems to have 9 mapped ranges
at boot. It seems like this define has been creeping
up for a while.
* Resolves the inital issue reported in #11377 on SkyLake
as well. Bonefish mentioned it might need to be raised
again... he had some good foresight there :-)
* I'm seeing the same no bootable partitions issue though
via USB after this raise. (maybe a USB 3.1 thing?)
* When the user isn't requesting a custom notification, it will
be a BMediaRoster job to do it.
* Reintroduce BMediaRoster::SyncToServices, this time based on local
message passing rather than a global semaphore.
* SyncToServices is used in launch_media_server to make the process
more launch_daemon safe and faster in the average case.
* It was an error to add notifications in the media_server.
* Fixes#12717.
...to just DefaultSettingsView
It is just as obvious what it does in context, but shorter.
Rename the function it contains from
BuildDefaultScreenSaverSettingsView to
BuildDefaultSettingsView
* The old debug system was too complex and made
troubleshooring difficult. (it also was unique
like a snowflake... which we don't want)
* Move to the classic TRACE / ERROR a large majority
of the code has changed to.
* I like trace statements, but drop some obvious ones
* Fix style issues along the way
* Remove SyncToServices, I will probably readd it in future
but this time using a local synchronization service more than
relying on the media_server to release the semaphore.
* Due to some discussions today in mailing list I decided
to step back and retry the initial way to notify media rosters
about media services status. It is woking by using two different
notifications for reconnecting to the media_server and notifying
the local subscribers.
* This speed up the media services restart.
* Sorry for the noise and very thanks for reviewing my code to
everyone.
* The global synchro semaphore is provided with the purpose of
being used to avoid threads lock up when the media_server is in
an undefined state. There's still room for improvements.
* BMediaRoster::SyncToServices lock up on a semaphore until
the multi_audio correctly connected to the mixer.
* There's no need to force the streamer plugin to use a
BMediaIO. This class is supplied to accomodate more smart uses,
but in certain cases it makes just things more complex. If a
plugin doesn't need to have an internal caching method, then it
will be simpler to implement a block-consuming BDataIO and let
the internal BMediaIOWrapper to deal with caching.
* When a watched directory contains a mount point, we need to resolve
the actual parent directory of the mount point in the file system to
serve the monitor.
* Added a directory argument for notify_{stat/attribute}_changed().
* This allows to watch only a directory, and get the notifications for
all of its files, not just add/remove entry notifications.
* Move current_mode into the accelerant as the
driver doesn't care.
* Record panel_mode in driver and present to accelerant
* eDP, if no EDID and mobile, leave edid incomplete.
Mode set should notice that and fall back to panel_mode
* DisplayPort != DigitalPort
* i2c needs wrapped in DP AUX transaction code
* Mode-setting comes with DP link training as well
* We need to try and share DP code with radeon_hd
* Since the BMediaRecorder have an it's own estabilished policy
relating releasing the producer node we will not interfere with
it except when we are controlled from Cortex.
* This required to review various parts of the code, and
isn't probably still perfect. The main problem was an attributes
hell where redondance created a lot of problems, all this data
is now controlled mostly by the node.
* Header indentation changes needed too.
* Added a function CopyMailFolderAttributes() that copies the attribute
layout from the text/x-email default query folder.
* This using the new CopyAttributes() method in libshared that is pretty
much a copy of a similar method from copyattr. However, I did not
replace the latter, as that one allows for more fine grained error
reporting (and attribute filtering).
* Closes ticket #3498.
Adopted parent colors for the text view - should not have done so.
Disabled colors were incorrect, so I also corrected those in this patch.
Fixes#12574.
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
The inseparable changes necessary to support live color updating across the
system in a sane, safe, and performant manner.
BView gains:
HasSystemColors()
HasDefaultColors()
AdoptSystemColors()
AdoptParentColors()
AdoptViewColor(BView*)
SetViewUIColor(color_which, float tint)
SetHighUIColor(...
SetLowUIColor(...
ViewUIColor(float* tint)
HighUIColor(...
LowUIColor(...
DelayedInvalidate()
BWindow gains a simple helper method:
IsOffscreenWindow()
BMessage gains:
AddColor()
FindColor()
GetColor()
HasColor() * allegedly this API is deprecated, but I implemented it anyway
ReplaceColor()
SetColor()
Previous private ColorTools methods are made public and moved into GraphicsDefs:
mix_color, blend_color, disable_color
These are fully compatible with BeOS dan0 R5.1 methods and are just code cleanup
of BeOS example code under the OpenTracker license.
In addition, four new colors are created:
B_LINK_TEXT_COLOR
B_LINK_HOVER_COLOR
B_LINK_ACTIVE_COLOR
B_LINK_VISITED_COLOR
These changes are documented in their proper user documentation files.
In addition, due to a history rewrite, B_FOLLOW_LEFT_TOP has been defined and
used in lieu of B_FOLLOW_TOP | B_FOLLOW_LEFT and is included in this commit.
On the app_server side, the following has changed:
Add DelayedMessage - a system by which messages can be sent at a scheduled time,
and can also be merged according to set rules. A single thread is used to service the
message queue and multiple recipients can be set for each message.
Desktop gains the ability to add message ports to a DelayedMessage so that
said messages can target either all applications or all windows, as needed.
Desktop maintains a BMessage which is used to queue up all pending color changes
and the delayed messaging system is used to enact these changes after a short
period of time has passed. This prevents abuse and allows the system to merge
repeated set_ui_color events into one event for client applications, improving
performance drastically.
In addition, B_COLORS_UPDATED is sent to the BApplication, which forwards the message
to each BWindow. This is done to improve performance over having the app_server
independently informing each window.
Decorator changes are live now, which required some reworking.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
* polarity regs move on LVDS vs analog
* add knowledge or transcoder registers, they
exist seperately on PCH-split
* Native resolutions now work on LVDS under i965
* IvyBridge or higher can auto-train.
* Linux doesn't use this feature, however
manual FDI link training is *really*
complex... lets try auto-training first.
* I really hope we can kill head_mode some day
* Break pll code out from mode code
* The LVDS and Digital are smooshed together and
likely need broken apart.
* A dependent job was requeued even if it wasn't part of the queue
before. The code relied on dependent jobs being already enqueued;
but that cannot be guaranteed.
* If a job failed, its dependent jobs are now also set to failed, so
that they won't be requeued at a later point.
* This caused some of the "Launching xxx failed: Operation not allowed"
messages in the boot process. Those actually weren't harmless, and
could mess up the natural job order.
* Sticky events are events that keep their signal raised, ie. even if
a job is initialized afterwards, it will still be triggered.
* Consolidated naming for external events.
* Events are now registered once they are actually being used. This
allows them to allocate the resources they need to do their thing.
* No impact to non-ValleyView chipsets
* Bump some register locations for VLV
* Only have HDMI port to test with on my ValleyView GPU
and our driver seems to be missing all HDMI and
sideband functionality.
* As ValleyView chipsets seem to be UEFI only, we don't
have VESA fallback, so this shouldn't cause regressions.
(unless we get UEFI framebuffer support)
* Move to more standardized functions matching AHCI spec
* Don't perform unnecessary double port resets
* Begin implementing a software reset to try first per spec.
Software reset needs more work, falls through to port reset
for the moment which is stable.
* Don't duplicate ATA defines, use what we already provide.
* Tested working on VirtualBox 1-16 AHCI ports, Intel C200,
and AMD FCH.
* Each io_context now has a "inherit_fds" member that decides whether
or not this context allows to inherit FDs to its children.
* This replaces the former O_CLOEXEC mechanism.
This introduces a more sane API (currently private) that allows for
safer and possibly more efficient implementations:
* It uses a struct of named and typed function pointers instead of just
a void pointer array. This adds type safety to the callbacks so the
compiler can figure out if things match up before subtle bugs get
introduced.
* It provides bounds for all strings/buffers passed to the callbacks.
* It uses const references instead of implicitly copying arguments.
* It folds stroke_x/fill_x pairs into draw_x functions with a fill
argument to reduce the amount of functions needed.
* It uses unsigned values where negative values make no sense.
The old API has been implemented on top of the new one using adapter
functions. It makes copies of all data passed to the callbacks which
effectively keeps the picture data from being modified. This matches
with the R5 behaviour.
This also reimplements the buffer parsing to be safe against corrupted
data by validating that the types actually fit in the provided sizes
and buffers (using a templated reader).
Since this class is used from the app_server with user provided data,
making it more safe is important even though it comes with a slight
overhead (replicating R5 behaviour, i.e. crashing the app_server when
corrupted data is fed, doesn't seem very appropriate here).
* This has been necessary due to the undefined call order of
of static objects. Fixes#12315.
* The bug has been caused by the linker which free unused resources,
making the BMediaRoster to run in a zombie state. In this state
anything such as a message could make the looper to crash.
* The class is reintroduced with some differences though, we are
going to protect it from another thread calling Roster() while the
BMediaRoster is quitting and implement BMediaRosterEx::Quit.
* Unregister registrar notifications before we quit our thread. Avoid
to uninitialize anything from QuitRequested as it may cause problems.
It allows to launch the app, but keep its main thread suspended instead
of automatically resuming it.
Also add appThread argument which allows to retrieve the main thread of
the launched team.
2 concrete classes which are currently implemented:
* BSpinner (works on int32s)
* BDecimalSpinner (works on doubles)
In addition BAbstractSpinner now inherits from BControl instead of
BView/BInvoker. This allowed for code simplification at the cost of needing to
cast for the decimal version because SetValue(int32 value) comes from BControl.
Also, add a spinner_button_style enum with 3 options:
* SPINNER_BUTTON_HORIZONTAL_ARROWS
* SPINNER_BUTTON_VERTICAL_ARROWS
* SPINNER_BUTTON_PLUS_MINUS
which sets the spinner arrows to either use horizontal arrows (left/right)
vertical arrows, (up/down), or +/- symbols (the default).
If the spinner button is using horizontal arrows you can decrement and increment
the spinner value by pushing control+left/right, otherwise you can increment and
decrement by pushing up or down. The reason for needing control is so that you
can move the cursor in the textbox otherwise.
Switch the 3 apps that are currently using BSpinners to use the integer variety
in Deskbar preferences, WebPostive preferences, and Screen preferences.
It provides a way for filesystems to cache a lookup failure and
therefore prevents repeated lookups of missing entries. This is a
common scenario for example in command lookup and compiling, where
each directory in PATH or each include directory is searched for the
given entry.
The individual debug heap implementations are now exposed via a
structure of function pointers and a common frontend dispatches the
malloc and malloc_debug APIs through them.
The MALLOC_DEBUG environment variable can be used to select the guarded
heap by adding 'g', otherwise the debug heap is used as the default.
Consequently the separate libroot_guarded is not needed anymore and has
been removed.
To allow the use of environment variables this early, init_env_post_heap
has been added and the heap dependent atfork() moved there. This allowed
to fold the code of init_heap_post_env into init_heap so the former has
been removed.
* Killing the thread leaks resources, and it will terminate cleanly and
safely when the destructor exits anyway.
* Fixes#12293. Thanks to ttcoder, jackburton and bonefish for investigating!
* Does not fix#12286. Going to bissect now...
* This is done by watching to registrar notifications
and providing a minimal service to contact the
media roster in private API. The roster use this
service to automatically reconnect to the media_server.
* Improve consistency by adding a BMediaRosterEx destructor
and using it for the specular functionality of ctor instead
to use the father's class destructor.
* Avoid double initialization of MediaInitializer that
becomes MediaRosterUndertaker.
* Remove superfluos call to BMediaRoster::Quit()
in media_addon_server.
For defining the text that appears alongside the icon.
This function really has too many parameters; we probably should break
it out into a BAction class...
* This also fixes the shutdown process, as the registrar no longer
kills the app_server.
* Removed SERVER_PORT_NAME definition as it has no use anymore.
* When creating the port of the registrar's authentication manager, we
now set it manually, so that the user/group functions work.
* This allows LaunchDaemon::_StartSession() to set up the user, and
groups as needed.
* Instead, the caller should have done this already. This is really
outside of the scope of the launch_daemon.
* Fixed Login with empty passwords; removed the (unused) test login
feature along the way.
* You can now add arbitrarily named fields to the message as well,
without having them all specified in the template.
* Also added a missing converter method that is called when there
are no values to add, and implemented all methods in the base
class, so that you only have to implement the methods you actually
need.
* BRoster now allows settings a "no-registrar" mode that is currently
only honored in _LaunchApp(), though.
* Job::Launch() is now using this, which also allows launching
applications by signature (ie. if the job name matches the
signature, you can omit the "launch" option).
* You can now put jobs/services into a target.
* Instead of having Login started as part of the normal boot process,
it's now in the "login" target.
* The app_server now launches the login target when a login becomes
available (ie. during startup, but that could be improved later on).
* Instead of launching Tracker/Deskbar directly, we now launch the
Login application.
* This will now start a new session for the selected user (the password
is currently ignored).
* When a user session is started, the launch_daemon forks, and the
child then restarts the LaunchDaemon application in user mode.
* It then registers itself with its parent, in order to resolve user
dependent services.
* Added a user launch file that will cause Tracker, and Deskbar to
start in the new session.
* get_roster_port_name() is no longer needed.
* This also removes the app_server restart code from the debug
server -- this will be done by the launch_daemon in the future.
* Instead of letting the kernel search for the syslog port, the
daemon now registers itself with the kernel (which even solves
a TODO).
* A port is created for the actual log messages from the launch_daemon,
and used on start.
* However, the SyslogTest does not yet work, due to the BMessage <->
KMessage communication problems.
* These methods don't really work yet, as BMessage doesn't support
replying with a KMessage; the request is received, but the reply
never gets to the target.
* Dropped "create_port" -- this is now the default for services.
* Additionally (or alternatively, if you use the "legacy" mode), you can
now create named ports, and specify their capacity.
* Added convenience methods to BLaunchRoster that automatically use the
signature of the current be_app.
* BRoster::Launch() cannot be used (yet), as it pre-registers the
application we're launching, and that won't work for the registrar or
anything else until the registrar is up and running.
* Renamed B_GET_LAUNCH_CONNECTIONS to B_GET_LAUNCH_DATA.
* Add the team ID to the get-launch-data reply.
* Added BLaunchRoster::GetPort() for convenience.
* Removed some superfluous debug output, but temporarily dump all stdio
to /dev/dprintf (ie. the syslog).
* Made job matching case insensitive (as MIME types should be).
* This enables a mechanism to profile almost the complete boot process
(starting with main2()), if SYSTEM_PROFILER is defined to 1.
* You can access the profiling data using "profile -r".
* This will be heavily inspired by Apple's launchd, as well as
systemd -- for now it really doesn't do a whole lot, though.
* What works so far: the configuration files are read, parsed, and
the jobs created.
* The jobs are even initialized, and their message ports created.
* BApplication now retrieves a previously created port from the
launch_daemon for use with BServer.
* Only the registrar actually uses this for now.
BColumnListView:
- Add helper method for getting the visible rect of a given field.
Refactor SuggestTextPosition to use it.
{Tree,Table}:
- Add wrapper to retrieve table cell rect using the aforementioned
BCLV helper.
The media_server is now able to remember the timesource associated to
a certain registered_node and always remove it when the owner
application crash, Fixes Ticket #11852
* Was leaking fQueuedJobs on destruction.
* fHaveRunnableJobSem implementation was not completed; it was never
released.
* Added Pop() variant that is a bit more flexible, and allows for a
timeout as well as waiting even when the queue is empty, and can
return a status code.
* Fixes sharing semantics, so non-shared semaphores in non-shared
memory do not become shared after a fork.
* Adds two new system calls: _user_mutex_sem_acquire/release(),
which reuse the user_mutex address-hashed wait mechanism.
* Named semaphores continue to use traditional sem_id semaphores.
* Put it in the BSupportKit namespace, following the style introduced
with the package kit for now.
* The BSupportKit::BJob class no longer knows about the package kit's
Context class. However, the BPackageKit::BJob class does.
* Due to the namespace juggling, a lot of files had to be touched.
* The JobQueue class remains private.
* Due to the way Haiku is built on itself, you cannot build this change
under Haiku with an older release.
* When you receive a message from a KMessage, and reply to it,
it will automatically reply as KMessage, too.
* This allows to communicate with BLoopers from within the kernel
or libroot.so.
The AddOnManager was in the global namespace, clashing with application
classes with the same name.
The input_server has an AddOnManager of its own. When the
shortcut_catcher filter was loaded by said AddOnManager, it in turn
loaded libgame.so, which in turn loaded libmedia.so, where an
AddOnManager was created for the global AddOnManager instance in
libmedia.so. Unfortunately the wrong AddOnManager, the one from the
input_server, was created. This lead to two AddOnManagers being active
in the input_server which very well could be responsible for #11049
and #11280.
This was a regression since the move of the AddOnManager from the
media_server to libmedia.so in hrev47086. This also fits with the two
tickets.
I actually noticed the problem when debugging the shutdown process of
the input_server, where the destruction of the wrong AddOnManager
caused a deadlock with itself.
The BNetworkRoute class manages a route_entry and the sockaddr's
associated with it. It replaces the direct use of route_entry in the
BNetworkInterface API.
Using route_entry is fragile and inconvenient as it only holds pointers
to the sockaddr's. When getting a list of routes from the kernel, each
route_entry is set up so that its pointers point into the single flat
buffer that is passed around. Creating a copy of the route_entry and
then deleting the flat buffer makes the pointers in the copy stale.
Returning these route entries therefore always lead to a use-after-free
when they were eventually used.
BNetworkRoute also takes over the code and functionallity of getting
routes from RouteSupport. The corresponding method in BNetworkRoster is
replaced by a static method in BNetworkRoute.
Also distinguish between the default route and gateway of an interface.
GetDefaultRoute() now gets the default BNetworkRoute for the interface
while GetDefaultGateway() gets the associated gateway address within
that default route. Adjust network preferences panel to this change.
Note that we currently only seem to have per interface default routes
and not an actual global default route. This was already the case before
these changes and I did not further investigate what this means.
It can be used to get a stack trace of the current thread. Note that
this works by walking frame pointers and will not produce anything
useful if an application is compiled with the frame pointers omitted.
The stack base and end addresses have to be provided as arguments and
are used to check that the frame pointers fall within that range. These
values are thread specific and can be retrieved with get_thread_info().
No other sanity checks (like checking for loops in the linked list) are
done.
This is a simplified rewrite of the stack trace code from the kernel
debugger.
As this code is common to x86 and x86_64 but is not generic across
architectures I introduced x86_common as a directory to put such
sources.
Extend the get_nearest_symbol_at_address() private runtime_loader
export to include imageName and exactMatch arguments.
The imageName holds the SONAME of the image, if available, so cannot
neccessarily be extracted from the image path.
Whether or not there was an exact match, i.e. the symbol with its size
contains the address, is now returned in exactMatch.
When enabled (using heap_debug_dump_allocations_on_exit(true) or
MALLOC_DEBUG=e) this causes a dump of all remaining allocations when
libroot_debug is unloaded. It uses terminate_after to be called as
late as possible.
When combined with alloc stack traces this makes for a nice if a bit
crude leak checker. Note that a lot of allocations usually remain
even at that stage due to statically, lazyly and globally allocated
stuff from the various system libraries where it isn't necessarily
worth the overhead to free them when the program terminates anyway.
The get_stack_trace syscall generates a stack trace using the kernel
debugging facilities and copies the resulting return address array to
the preallocated buffer from userland. It is only possible to get a
stack trace of the current thread.
The lookup_symbol syscall can be used to look up the symbol and image
name corresponding to an address. It can be used to resolve symbols
from a stack trace generated by the get_stack_trace syscall. Only
symbols of the current team can be looked up. Note that this uses
the symbol lookup of the kernel debugger which does not support lookup
of all symbols (static functions are missing for example).
This is meant to be used in situations where more elaborate stack trace
generation, like done in the userland debugging helpers, is not possible
due to constraints.
* Add a BRow default constructor that use font size to compute height.
* Min height size for Title and Row are decoupled.
* The font ratio for Title and Row are decoupled.
* For small font use min height (set to usual 16.0).
* Better baseline formula.
* Fixes#11944.
* So that you know how much already was, and still has to be downloaded.
* Automatic whitespace cleanup.
* The link in FetchFileJob.h did not fetch the correct header under
Haiku anymore (since the addition of the private headers to the
image).
* drop my fdt tests
* we have to call fdt parsing code *after* cpu_init (why?)
* pass fdt pointer to all FDT support calls to avoid confusion
once we get into the kernel land
* look for PL011 compatible uart and use it
* Add some saftey checks to serial putc code to avoid null*
* fdt_node_check_compatible returns 0 on success not 1
* fdt_get_device_reg needs to add the SOC base to the result
* fdt_get_device_reg might need to add the second range cell
instead of reg?
* You can now optionally specify a converter that does the actual
message to settings conversion, and vice versa.
* This allows for more sophisticated and custom conversions.
* Added an extra looperName argument to the private BApplication
constructor that BServer is using.
* This is now used to fix the ugliness that gave the registrar
a different looper name, and even saves a string comparison.
* Move more code into fdt_support
* We now can query FDT registers based on name or alias
* Return addr_t where it makes sense
* Copyright change ok'ed by mmu_man
* Called via arm_mailbox_bcm2835 *and* arm_framebuffer_bcm2835
* This is a bit messy. We really should be getting these
chipset-centric bases from the provided FDT / DTB.
* I can't think of a way to redo this without undoing
work towards FDT.
* The Raspberry pi 2 uses a new SoC which differs slightly
from the Raspberry Pi 1.
* Someday these two board targets could go away when we get
FDT support.
* To while there was some compatibility between
BCM2708 and BCM2805, it makes the BCM2806 changes
more confusing. We don't have any valueable BCM2708
targets.
Implement the todo in Open Target Folder to select the result by sending
Tracker a message with the refs to select.
Add a new kSelect message constant to tracker_private.h to hook into.
Tracker reads in the message and finds the window that the refs are located in,
activates it, then selects the corresponding poses scrolling the pose view
if necessary.
Bump version of Open Target Folder to 1.0.2
Intel changed the PCH interrupt bits between Sandy Bridge and Ivy Bridge
to make space for the 3rd display pipe. Take this into account and check
for the correct bits on the newer devices.
Fixes#11522.
"BToolBar" matches the current convention ("BStatusBar", "BMenuBar", etc.)
I've no idea what I was thinking when I renamed this before...
Also adjust all users of BToolBar (Tracker and ShowImage).
* The default notifier didn't always take the setting into account.
* The mail server was not using the setting from the settings file and
instead waiting for a message that wasn't sent anywhere.
Fixes#10852.
* Use the preferred time source (GetTimeSource) for the node
* Fix node releasing when creating the connection fails
* Add virtual slots and padding
* Refactor _Connect method
* offsetof is not allowed on non-POD types so we need to use
offset_of_member (gcc2 accepts offsetof, and C++11 relaxed the
constraints on where it is allowed so it should work there too)
* we have offset_of_member as a workaround until we switch to C++11,
move it from khash (which is soon to be removed) to list.h which is the
other place where it is used (for this one single call in our whole
codebase)
Also fix a typo in vfs.cpp.
* Not everything compiles; all protocols, and inbound filters do, though.
* Renamed a few classes to give a better idea what they are for; prefixed
public classes with the 'B' prefix.
* Moved ProtocolConfigView's classes into the BPrivate namespace.
* Moved BMailFilter into its own file.
* Added BMailFilter::DescriptiveName(). This is now used by the RuleFilter
in order to give a description of what it's doing (ie. no more dozens of
"Rule filter" entries in the preferences).
* Removed no longer used MailAddon.h.
* Renamed Addon to AddOn where found, since that is more consistent with the
rest of the API.
* Merged the former MailProtocol with the former MailProtocolThread; the
differentiation between those two was pretty messy.
* All configuration views touched so far are now using the layout kit.
* The RuleFilter is currently broken functionality wise; I have not yet decided
how to solve the stuff it uses (TriggerFileMove() does not exist anymore,
for example).
* BMailAddOnSettings (formerly known as AddonSettings) now directly subclass
BMessage; there are no Settings() and EditSettings() method anymore. The
class uses a copy of itself to determine whether or not it has been changed.
* Lots of cleanup.
* Renamed imap_config.cpp to ConfigView.cpp, IMAPFolderConfig.(h|cpp)
to FolderConfigWindow.(h|cpp).
* Got the latter to build.
* Added Settings class to simplify and unify the BMessage based
settings access.
* Removed the InboundProtocol[Thread] implementation from the build for now.
I already made this patch in Heidi's clone of BToolbar. Adding it here
allows me to drop Heidi's version altogether.
I also relicensed the header file at the permission of Stephan. The .cpp
file still lists him as author and copyright holder.
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
CreateThreadEvent::DoDPC() missed a reference release to balance the
acquired reference before queuing the DPC, resulting in the
CreateThreadEvent objects being leaked.
This also removes the destructor that tried to cancel the DPC. Since
the class is reference counted and only destroyed when the DPC has
run and released the last reference, this didn't make much sense.
The signal to the team/thread is only actually sent in a deferred
procedure. To ensure that the team/thread stays valid between the DPC
being queued and it actually running, we need to acquire a reference.
Fixes#11390, where the DPC was run after the team was already
destroyed.
* VMArea::AddWaiterIfWired(): Replace the ignoreRange argument by a
flags argument and introduce (currently only) flag
IGNORE_WRITE_WIRED_RANGES. If specified, ranges wired for writing
are ignored. Ignoring just a single specified range doesn't cut it
in vm_soft_fault(), and there aren't any other users of that feature.
* vm_soft_fault(): When having to unmap a page of a lower cache, this
page cannot be wired for writing. So we can safely ignore all
writed-wired ranges, instead of just our own. We even have to do that
in case there's another thread that concurrently tries to write-wire
the same page, since otherwise we'd deadlock waiting for each other.
The thread that is being [un]scheduled already has its time_lock locked
in {stop|continue}_cpu_timers(). When updating the TeamTimeUserTimer,
the team is asked for its cpu time. Team::CPUTime() then iterates the
threads of the team and locks the time_lock of the thread again.
This workaround passes a possibly locked thread through the relevant
functions so Team::CPUTime() can decide whether or not a thread it
iterates needs to be locked or not.
This works around #11032 and its duplicates #11314 and #11344.
when uninitializing a partition or a disk (removing the partition
table), check that all partitions from that table are unmounted, as they
are about to become invalid.
Fixes#8827.
The BOOT_GDT_SEGMENT_COUNT was based on USER_DATA_SEGMENT on both
x86 and x86_64. However, on x86_64 the order of the segments is
different, leading to a too small gBootGDT array. Move the define to
the arch specific headers so they can be setup correctly in either case.
Also add a STATIC_ASSERT() to check that the descriptors fit into the
array.
Pointed out by CID 1210898.
There were 3 setting files, each an archived BMessage. Now there is only
one with all the data inside.
* Rework the SettingsPane class to save and load settings from a
message, rather than having each panel pick a file path on its own
* Move saving the app filters to the preference app, rather than the
server (so it's done at the same place as other settings)
* Rework loading prefs in the server so the settings message is read
from the file once and all settings are loaded from it.
This turns out to be more changes than I anticipated.
Fixes#9424.
* Move relevant parts up into BFormat so other format classes can use
those
* Adjust BDurationFormat and BTimeUnitFormat for the changes
* Remove the "default" date format, it is better to keep only a default
locale and let applications create B*Formats from it as needed.
* Creating a B*Format without arguments to the constructor now
configures it for the default locale, which allows for easy use in
standard cases (formatting something with the current language and
format)
* Creating a B*Format is potentially an expansive operation, it is
advised to keep the instance around and reuse it whenever possible.
However it must be "refreshed" when the locale changes, for apps which
supports that, since it keeps a copy of the language and formatting
convention, rather than a pointer to the locale as it did before.
* BDate setters don't perform any validation, use with caution.
* BCalendarView setters do perform validation checks, and will adjust
the day so it fits the requested month or year.
* Add tests for the BCalendarView setters.
* There is a little code duplication. This will be moved to BFormat once
the time and datetime formatting is also moved out of BLocale
* The way to create a BDateFormat from a BLocale is still open for
discussion. I'm undecided between making BDateFormat a member of
BLocale, or adding a BDateFormat(const BLocale&) constructor.
* Adjust all users of the API.
A BGeolocation object can query an online service to get geolocation
and geotagging data:
* LocateSelf() tries to locate the machine it is running on, by using an
online database of wifi access points
* Locate() (not yet implemented) searches a BString and converts it to
lat/lon coordinates (reverse geotagging)
* Name() (not yet implemented) finds a suitable name for the given
coordinates (address, building name, or anything fitting).
The default service used is openbmap.org, which is freely available but
not very accurate. A request has been sent to Mozilla to use MLS
(Mozilla Location Services), which is a bit more accurate but needs an
API key. MLS is used for geolocation on FirefoxOS, for mobile phones
which don't have a GPS, and the data can be contributed by Firefox for
Android or the dedicated MozStumbler app.
Alternatively, Google Maps also provide the service, but wants
people to pay for it. Google Maps data is more accurate as all Android
devices contribute data to it.
All 3 services use the same JSON-based API: we send a list of reachable
Wifi APs (mac address and signal strength), and we get lattitude and
longitude information, and possibly extra data which will currently be
unused.
This can be used to implement HTML5 geolocation with reasonably accurate
results, but it can also be used in other places. For example
FirstBootPrompt could try to guess a list of most likely languages and
keyboard layouts from it (if wifi is working at install time, that is).
Comments to #9672 agree that there's really no need to
expose the dev_t handle, thus simplifying the API.
The dev_t handle, if required, can be retrieved via
BPartition::GetVolume() instead.
This patch adds user_access() which can be used to gracefully handle
page faults that may happen when accessing user memory. It is used
by arch_cpu_user{memcpy, memset, strlcpy}() to allow using optimized
functions from the standard library.
Currently only x64 uses this, but nothing really is arch specific here.
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
The kernel is allowed to use fpu anywhere so we must make sure that
user state is not clobbered by saving fpu state at interrupt entry.
There is no need to do that in case of system calls since all fpu
data registers are caller saved.
We do not need, though, to save the whole fpu state at task swich
(again, thanks to calling convention). Only status and control
registers are preserved. This patch actually adds xmm0-15 register
to clobber list of task swich code, but the only reason of that is
to make sure that nothing bad happens inside the function that
executes that task swich. Inspection of the generated code shows
that no xmm registers are actually saved.
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
Enable SSE as a part of the "preparation of the environment to run any
C or C++ code" in the entry points of stage2 bootloader.
SSE2 is going to be used by memset() and memcpy().
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
There is absolutely no reason for these functions to be in commpage,
they don't do anything that involves the kernel in any way.
Additionaly, this patch rewrites memset and memcpy to C++, current
implementation is quite simple (though it may perform surprisingly
well when dealing with large buffers on cpus with ermsb). Better
versions are coming soon.
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
The possibility to specify custom memcpy and memset implementations
in cpu modules is currently unused and there is generally no point
in such feature.
There are only 2 x86 vendors that really matter and there isn't
very big difference in performance of the generic optmized versions
of these funcions across different models. Even if we wanted different
versions of memset and memcpy depending on the processor model or
features much better solution would be to use STT_GNU_IFUNC and save
one indirect call.
Long story short, we don't really benefit in any way from
get_optimized_functions and the feature it implements and it only adds
unnecessary complexity to the code.
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
* Removes default mapping of a portion of the RAM (will be done
as needed)
* Passes on the page directory area to kernel, so on early vm init
the kernel can use the area for pagetable allocation.
* Leaves it to the platform to pass in physical memory range(s). This
will ultimately come from FDT.
* Fix long standing issue with allocation of the heap, potentially
causing other part of the bootloader to overwrite the heap.
* Implements pagetable allocator in kernel for early vm mapping.
This fixes the first PANIC seen, we now just get the same one later
on when the VM is up... more to come...
This reverts commit 3fbb24680c.
As I mentioned in #11131, this fix is not correct, and works around
the problem. The real reason was that arch_debug_call_with_fault_handler
was not working properly, so the fault handler went crazy.
With commit eb92810 that is fixed so this can be reverted.
If GCC knows what these functions are actually doing the resulting
code can be optimized better what is especially noticeable in case of
invocations of atomic_{or,and}() that ignore the result. Obviously,
everything is inlined what also improves performance.
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
Based on an earlier piece of source code of mine that parsed JSON into
QObjects, this JSON parser creates a BMessage tree.
Will be used by Stephan in HaikuDepot for communication with the web app.
* From now on, the gcc-specific system libraries (libgcc, libsupc++ and
libstdc++) are provided by separate packages built along with gcc:
- gcc_syslibs contains the shared libraries (libgcc_s.so, libsupc++.so and
libstdc++.so)
- gcc_syslibs_devel contains the static libraries and both c++ and gcc
headers
The shared libraries now make proper use of symbol versioning and there
are version-specific symlinks
* The buildsystem has been adjusted to no longer use the libraries and
headers from the cross-compiler, but use the ones provided by the
above-mentioned packages. The only exception is that the 32-bit libraries
required for the bootloader of the x86_64 architecture are still taken
from the cross-compiler.
* The new libstdc++.so contains program headers of type PT_RELRO (for
making segments read-only after relocation). While the actual feature
has not been implemented, the runtime_loader should now silently
accept (and ignore) those program headers.
instead or additionally to string.h, in preparation for functions move.
* moves str[n]casecmp() functions and others to strings.h.
* strings.h doesn't include string.h anymore.
* this solves #10949
Besides that this is a nicer interface, it allows us to get a the HPKG
header as a side effect of initializing the reader, thus preventing
seeking backward in the file. This makes "package recompress - <file>"
work.
* Prefix lock functions with __ to mark them as private. Add
forwarding macros to keep existing code working.
* Avoids symbol name clashes with kernel lock APIs, occuring when
using kernellandemu-lib in userlandfs. Thanks to Ingo for the
suggestion.
Until now we always declared in the HPKG header that the package file is
zlib compressed. For uncompressed files we would just store all
individual chunks uncompressed. Now we handle completely uncompressed
files slightly differently: We don't write the redundant chunk size
table anymore. The size savings are minor, but it makes the uncompressed
format read-streamable which may be handy.
* PackageFileHeap{Reader,Writer} as well as Package{Reader,Writer} and
their implementation and super classes do now internally use a
BPositionIO instead of a FD to access the package file. This provides
more flexibility needed for features to come.
* BPackageReader has already grown a new Init() version with a
BPositionIO* parameter.
Simple BPositionIO implementation using the POSIX API on a FD. In effect
similar to BFile, but more easily ported to kernel and boot loader (and
the FD is reusable).
* Ingo copied the methods into a shared location, and then obviously
"forgot" to let BFS use them. As a side note for Ingo: the complete
error GCC reported was "std::fssh_size_t" not defined with the macro
wrapper as code location. The actual problem was a "using std::size_t"
in some C++ header that accidentally got included after the wrapper.
* The shared Query code is not yet used. That'll be done another time.
* Renamed BFS_SHELL define to FS_SHELL, such that QueryParserUtils can be
used in any file system shell, not just the bfs_shell.
* BCompressionAlgorithm is a base class for classes that provide
compression/decompression functionality. There are methods for
compressing/decompressing a single buffer and factory methods for
a compressing/decompressing input/output BDataIO.
* BZlibCompressionAlgorithm is a BCompressionAlgorithm implementation
using zlib.
* FDDataWriter and ZlibDataWriter weren't used anymore.
* AbstractDataWriter was implemented only by PackageFileHeapWriter,
which was only used by WriterImplBase.
* Add a PackageFileHeapWriter::AddDataThrows() which has semantics
equivalent to the previously inherited WriteDataThrows().
Can be requested/stopped via BPackageRoster::{Start,Stop}Watching().
The notification message has the what code B_PACKAGE_UPDATE and contains
fields "event", "location", and "change count".
* The Install() and Update() versions that take a const char* array
now check whether a string looks like a path to a local package file.
If so, they use that file instead of interpreting the string as a
search string.
* Extend the repository hierarchy. There's now a LocalRepository base
class from which InstalledRepository and the new MiscLocalRepository
derive. The latter is instantiated once and collects all package files
specified by path.
* BFatalErrorException: Add commitTransactionResult property and
respective constructor. In case committing the transaction failed,
BPackageManager throws a BFatalErrorException with the result.
* BFatalErrorException::UserInteractionHandler: Pass
BCommitTransactionResult to ProgressTransactionCommitted().
* BDaemonClient: Move inner class BCommitTransactionResult to top level
and make it public.
* BCommitTransactionResult:
- Add a whole bunch of specific error code enum values. Such an error
code is now the primary error, as opposed to before where we would
mix status_t and enum value errors. There's a systemError property
of type status_t which may provide additional information, though
(depending on the primary error type).
- Remove the errorMessage property. Due to mapping all errors to the
specific error codes this is no longer necessary. Mixing such a
message with another error description is also not very helpful when
it comes to localization (still not supported, though).
- Add several properties (paths, strings, error codes) that serve as
arguments to the primary error and are used by FullErrorMessage().
- Add issues property, a list of instances of new class
BTransactionIssue. Those describe non-critical issues (e.g. failed
update of a settings file) that occurred in the process of
committing the transaction. Those issues should be presented to the
user by the package management program.
* Exception: Adjust to transport the BCommitTransactionResult
properties.
* CommitTransactionHandler, FsTransactions, Root, Volume: Adjust to
BCommitTransactionResult/Exception changes.
* CommitTransactionHandler: Now requires a BCommitTransactionResult to
which it adds the issues it encounters. The reply BMessage is no
longer needed, though.
* Volume: Refactor common code from the three methods that use
CommitTransactionHandler into new method _CommitTransaction.
Add GetPathOrName() and PathOrName() methods which try to get some kind
of usable path or at least a file name for the entry. Useful mainly for
debugging and error reporting cases.
When an ARMv7 CPU is detected, immediately turn on the FPU. This allows
us to use vsnprintf in the TRACE call in that function, as our libc is
compiled with floating point support and will trigger a fault if the FPU
is not available.
This lets the boot go further, and crash in mmu_init. Next steps:
* Find why mmu_init is crashing
* Setup some fault handlers, otherwise we call uboot ones, and they are
not very helpful. They will also probably not work once the mmu is
enabledvery helpful. They will also probably not work once the mmu is
enabledvery helpful. They will also probably not work once the mmu is
enabled...
* The Network Kit now makes use of it for BUrlContext, so we need this
in the public headers.
* Problem caught by the new build bot by compiling the unit tests.
* These aren't tested, but since we go off of DCE
versions for a lot of stuff, they may work.
* AMD doens't include market names in their drivers
anymore, so if we want to label them it will take
additional work.
This patch makes it possible to inline rdmsr and wrmsr instruction. The
performance impact shouldn't be significant since they are used relatively
rarely and wrmsr is usually a serializing instruction, but there is no reason
not to do so.
The goal of this patch is to amortize the cost of context switch by making
the compiler aware that context switch clobbers all registers. Because all
register need to be saved anyway there is no additional cost of using
callee saved register in the function that does the context switch.
Similarly to previous patch regarding GDT this is mostly a rewrite of
IDT handling code from C to C++. Thanks to constexpr IDT is now entirely
generated at compile-time.
Virtually no functional change, just rewriting the code from
"C in *.cpp files" to C++. Use of constexpr may be advantageous but
that code is not performance critical anyway.
This patch introduces support of ELF based TLS handling with lazy allocation
and initalization of TLS block for each DSO and thread. The implementation
generally follows the official ABI except that generation counter in dtv
is in fact a pointer to Generation object that contains both generation
counter and size of the dtv. That simplified the implementation a bit, but
could be changed later. The ABI requirements regariding in memory position
of TLS block is not honoured what results in static TLS model being
unsupported. However, that should not be a problem as long as
"executables" in Haiku are in fact shared objects and optimizations which
require specific TLS block in memory layout are not possible anyway.
* Instead of forcing the hash-table to use a copy of the key,
introduce and use TypeOperation template to avoid taking a
reference of a reference type (which gcc2 doesn't allow).
* PackageFSVolumeInfo: Add the directories for all relevant states.
* PackageFSPackageInfo: Include the package file's parent directory node
ref.
Package daemon and package kit still don't support old states yet.
For potential boot volumes with older packages states the respective
item in the boot volume menu now has a sub menu for selecting a state.
The boot loader functionality for this feature is complete -- i.e. the
respective kernel is loaded and the name of the old state is added to
the kernel args -- but kernel packagefs and package daemon support is
still missing.
... in filenames. Replace the existing Unicode conversion functions
with UTF conversion functions from js that he relicensed MIT for us.
Put the UTF conversion functions in a private but shared code location
so that they can be accessed throughout the kernel.
Right now we only provide functions to convert between UTF-8 and UTF-16.
At some point we should also add functions to convert between UTF-8 and
UTF-32 and UTF-16 and UTF-32 but these aren't needed by exfat.
Remove the old Unicode conversion functions from exfat as they assumed
UCS-2 characters and don't work with UTF-16 used by exfat.
Rename most variables with the term length with code unit where code units
are intended. The term length, when used, means length in bytes while code
units represent either a full 2-byte UTF-16 character or half a 4-byte
surrogate pair.
The media server tried to use node monitoring to dynamically add and
remove plug-ins, but it isn't that useful:
* When a plug-in is added, applications would have to query the media
server to get an up to date list of available formats. For example
MediaConvert populates its format menus on startup.
* When removing a plugin, if an app already had it loaded, there is not
much that can be done to keep it working.
* The list of plugins was not sorted by directories (user vs system
add-ons), so the directories were re-scanned to make sure user add-ons
were returned first, rendering the node monitoring less interesting.
Now, the format handling is done by each application. The node
monitoring is removed, instead the apps will scan the plugin directory
when first using the media kit classes. Restarting the application is
needed to update the media formats list.
...when sending the whole view state over the link.
Also inherit the fill rule when pushing states (DrawState
copy constructor). A somewhat sloppy oversight, I must add.
After load_image() the child thread is suspended and the parent is
expected to resume it later. However, it is possible that the parent
attempts to resume its child after it has been notified that the image
had been loaded but before the child managed to suspend itself. In such
case the child would suspends itself after that wake up attempt and,
consequently will not be ever resumed.
To mitigate that problem flag Thread::going_to_suspend has been added
which helps synchronizing thread suspension and continuation in a similar
way that "traditional" thread blocking is performed. This means that
the child should behave in a following manner: set its going_to_suspend flag,
notify the parent (i.e. any thread that may want to resume it), acquire
its scheduler_lock and suspend itself if the going_to_suspend flag is set.
The parent should follow pattern: clear going_to_suspend flag of the thread
that is about to be resumed, acquire that thread scheduler_lock and enqueue
it in a run queue if it is suspended.
Thanks Oliver for reporting the bug and identifying what causes it.
Most of the actual UserEvent work is done in DPC so that we don't have
to care about the limitations of the context in which UserEvent::Fire()
is invoked. This requires appropriate management of lifetime of UserEvent
instances to make sure that DoDPC() method is always called on a valid
object.
* BView gets SetFillRule/FillRule methods. The fill rule is part of the
view state.
* The B_NONZERO rule is the default. This is what we implemented before.
* The B_EVEN_ODD rule is the other common possibility for this, and
we need to support it to help WebKit to render properly.
* Add isb just because.
* pdziepak pointed out that ARMv5 and before
had different barrier support.
* pdziepak also mentioned that dsb was too strong
for __sync_synchronize
* On ARMv6 or older, we do a simulated dsb.
* Move __sync_synchronize into thread.c in libroot
and use the new arch_atomic.h dsb/dmb defines.
* Gets arm @bootstrap-raw to end of bootstrap.
* Don't assume verdex as it isn't clear this was
occurring.
* Make an educated guess on HAIKU_BOOT_PLATFORM
based on provided board (but still allow it to
be overridden)
* Error out if user doesn't populate
HAIKU_BOOT_PLATFORM or enters an unknown board
name.
* You need to add "-sHAIKU_BOOT_BOARD=xxx" to
your jam to build for the proper ARM device.
* Rename beagle to beagleboneblk as per the
documentation.
* Use atomic_get_and_set for return value
* Atomics are no longer volatile
* Add missing arch_cpu_pause stub
* Move arch_cpu_idle to arch_cpu header to match
other architectures
* This will be used to implement compressed http streams
* Remove the custom BDataOutput class, and use BDataIO instead, for
easier integration with existing code.
* ... instead of queuing it for the job thread. The advantage is that
the request will be handled immediately and clients won't have to wait
for transactions (which may even require user feedback) to finish. It
complicates Volume a bit, since there are now two threads that may
access it. The shared data have been moved to a State object which is
protected by a lock.
* For commit transaction requests check whether another package request
is already pending/in progress before queuing a job. Fail immediately,
if there is.
Fixes bug #10039.
Everything untested, but compiles, so it must work. The idea is to introduce
BAffineTransform additionally to the existing Origin and Scale properties of
BViews. One may use it in parallel or as an alternative. Painter in app_server
is not yet aware of the additional transformation. It is however already used
to transform drawing coordinates. It probably needs to work differently,
perhaps only in Painter and AGGTextRenderer.
* This is less pretty, but we need access to the connector
to find the HPD gpio pin mask on the card.
* dp_aux communications seem to work again.
* If you have a DisplayPort item attached to your card you
may want to just unplug it at this point. We attempt DP
link training and it fails. This failure will also cause
other monitors to not function as app_server still isn't
multi-head aware (#10486)
For non-US keyboards, the extra 102th/105th key is used to reach \. But,
we also need it to report | when shifted (this is the key left to
"enter").
This affects only USB keyboards. Thanks to gordoncjp for reporting!
When switching AppMetaMimeCreator from BMimeType to Database the
SetIcon[ForType]() calls with a BBitmap* ended up calling the vector
icon version with the icon_size as the data size argument, thus not only
not writing the bitmap icon attributes, but also clobbering the vector
icon attribute.
* BSolver/LibsolvSolver: Add FullSync() method. It uses libsolv's
SOLVER_DISTUPGRADE mode.
* BPackageManager: Add FullSync() using the new solver mode.
* pkgman: Add full-sync command.
The new command is similar to the update command without arguments, just
more aggressive, allowing downgrading or even removal of packages, to
match the state of the repositories. Just like "update" it doesn't work
properly yet.
UserEvent can be fired from scheduler_reschedule() i.e. while holding current
thread scheduler_lock. If the current thread goes sleep and during reschedule
one of its timers sends a signel to it, then scheduler_enqueue_in_run_queue()
attempts to acquire again its scheduler_lock resulting in a deadlock.
There was also a minor issue with both scheduler_reschedule() and
scheduler_enqueue_in_run_queue() acquiring current CPU scheduler mode lock.
Some websites set cookies expiring in the (not so) far future, after year 2038.
So, using time_t to store the cookie expiration date won't do. Use the
BDateTime class instead.
This makes goodsearch.com login work again (#10460).
Adjust Database{Location} to only attempt to create a mimetype when
actually necessary, and fail otherwise if a writable version doesn't yet
exist. Correspondingly, adjust callers such as
DatabaseLocation::DeleteAttribute(). Fixes a problem where a caller asking
to perform a mimeset could fail early due to SetSupportedTypes() attempting
to update the read-only mime database entry supplied by a package, and
consequently most of the mimeset operations would be skipped.
* Fix incorrect cpu vendor name mapping
* Add additional CPU architectures
* Add additional CPU vendors
* Rework PowerPC arch_system_info passing
PVR back for cpu model
* Set max cpu to 1 for PPC until atomic functions are finished
* We have atomic functions inline in the kernel and assembly
code in libroot post-scheduler merge... isn't that a lot of
duplication?
Add boot loader debug menu option "Save syslog from previous session
during boot". If enabled (defaults to true), the previous session's
debug syslog data is copy to a separate buffer and passed to the
kernel, which writes it back to the file /var/log/previous_syslog.
As long as Haiku still boots, this should now be the most convenient way
to retrieve the output from a kernel crash.
https://github.com/druga/haiku-stuff/tree/master/intel_extreme
Rebased against current sources.
* The BIOS video mode sometimes reports a scaled mode instead of the
physical panel dimensions. Get the data from the VBT table as well, and
use it if the reported resolution is bigger.
* On first boot, force the panel native mode so the user doesn't have to
set it manually.
* Only allow a single head at a time on i855gm, as the card can't drive
both heads at the same time.
* Detect when a new requested mode is the same as the current one, and
skip modesetting in that case. Avoids screen flickering when changing
workspaces.
* Fix some cases of misdetecting which pipes to enable
Previous implementation based on the actual load of each core and share
each thread has in that load turned up to be very problematic when
balancing load on very heavily loaded systems (i.e. more threads
consuming all available CPU time than there is logical CPUs).
The new approach is to estimate how much load would a thread produce
if it had all CPU time only for itself. Summing such load estimations
of each thread assigned to a given core we get a rank that contains
much more information than just simple actual core load.
* Previously PE binaries would trigger the "incorrectly
executable" dialog. Now we get a special message for
B_LEGACY_EXECUTABLE and B_UNKNOWN_EXECUTABLE
* Legacy at the moment is a R3 x86 PE binary. This could
be extended to gcc2 binaries someday far, far, down the
road though
* The check for legacy is based on a PE flag I see
set on every R3 binary (that isn't set on dos ones)
* Unknown is something we know *is* an executable, but
can't do anything with (such as an MSDOS or Windows
application)
* No performance drops as we do the PE scan last
* Tested on x86 and x86_gcc2
This field forces kernel to track each CPU load all the time. It is not
a problem with the current scheduler on a multicore systems, but on
single core machnies or with any other future scheduler this field may
become just an unnecessary burden. It isn't difficult for an application
to compute CPU load by itself when it needs it.
The icon is meant as an addition to or replacement of the label. Icon
bitmaps for various states of the control (off, on, partially on, each
enabled or disabled, plus up to 125 custom states) can be set
individually via SetIconBitmap() (getter IconBitmap()).
The convenience method SetIcon() can be used to set the bitmaps for the
standard states from a single bitmap; it also supports cropping the
icon to its non-transparent area. Code borrowed from BIconButton.
atomic_{get, set}64() are problematic on architectures without 64 bit
compare and swap.
Also, using sequential lock instead of atomic access ensures that
any reads from cpu_ent::active_time won't require any writes to shared
memory.
The client code is not supposed to change the topology info.
It would be also nice if cpu_topology_node::children was an array of
pointers to const but that would require several const_casts in the
topology tree generation code so it's probably not worth it.
Apparently, reading from dr3 is slower than reading from memory
with cache hit.
Also, depending on hypervisor configuration, accessing dr3 may cause
a VM exit (and, at least on kvm, it does), what makes it much slower
than a memory access even when there is a cache miss.
Add get_safemode_option_early() and get_safemode_boolean_early() to get
safemode options before the kernel heap has been initialized. They use a
simplified parser.
* VMTranslationMap:
- Add DebugPrintMappingInfo(): Given a virtual address it is supposed
to print the paging structure information for that address. To be
implemented by derived classes.
- Add DebugGetReverseMappingInfo(): Given a physical addresss it is
supposed to find all virtual addresses mapped to it. To be
implemented by derived classes.
* X86VMTranslationMapPAE: Implement the new methods
DebugPrintMappingInfo() and DebugGetReverseMappingInfo().
* Add KDL command "mapping". It supports both virtual address lookups
and reverse lookups.
__flatten_process_args() does now have the executable path as an
additional (optional) parameter. If specified, the function will read
the file's SYS:ENV attribute (if set) and use its value to modified the
environment it is preparing for the new process. Currently supported
attribute values are strings consisting of "<var>=<value>" substrings
separated by "\0" (backslash zero), with '\' being used as an escape
character. The environment will be altered to contain the specified
"<var>=<value>" elements, replacing a preexisting <var> element (if
any).
A possible use case would be setting a SYS:ENV attribute with value
"DISABLE_ASLR=1" on an executable that needs ASLR disabled.
* VMAddressSpace: Add randomizingEnabled property.
* VMUserAddressSpace: Randomize addresses only when randomizingEnabled
property is set.
* create_team_arg(): Check, if the team's environment contains
"DISABLE_ASLR=1". Set the team's address space property
randomizingEnabled accordingly in load_image_internal() and
exec_team().
* Create new interface for cpuidle modules (similar to the cpufreq
interface)
* Generic cpuidle module is no longer needed
* Fix and update Intel C-State module
* Increase FIFO buffer capacity from 32 to 64 KiB and the FIFO atomic
write size ({BUF_SIZE}) from 512 bytes to 4 KiB (both like Linux).
* Fix *pathconf(..., _PC_PIPE_BUF). It was returning 4 KiB although the
implemented atomic write size was 512 bytes only. Now both *pathconf()
and the FIFO implementation refer to the same constant.
A DatabaseLocation is passed to the constructor and used to verify that
the sniffed MIME type is installed instead of BMimeType::IsInstalled().
This makes the add-on independent of the default MIME DB.
Most of the hooks don't strictly need a non-empty implementation. The
defaults now simply throw exceptions in those that do. This allows the
class to be instantiated, which is useful when a BPackageManager is only
used for finding packages.
Require the installation interface and the user interaction handle to
be passed to the constructor. Formerly, derived classes set them
manually in their constructors. This makes using the class without
having to subclass it possible.
It's a browser for the system package content, where entries can be
selected to blacklist them. The selected entries are removed from the
packagefs instance in the boot loader, so that e.g. selected drivers
won't be picked up. The paths are also added to the safe mode driver
settings and will be interpreted when the system packagefs instance is
mounted by the kernel.
* Make Menu and MenuItem polymorphic.
* MenuItem:
- Make SetMarked() virtual, so it can be overridden.
- Add SetSubmenu() and Supermenu().
- Delete the submenu in the destructor.
* Menu:
- Add Entered()/Exited() hooks. They frame the time the user navigates
the menu or any of its submenus. The hooks allow for subclasses
populating their item list dynamically.
- Add SortItems().
* Update boot loader menu copyright text to include 2013, now that it is
over soon. :-)
In each installation location, it is now possible to create a settings
file "packages" that allows to blacklist entries contained in packages.
The format is:
Package <package name> {
EntryBlacklist {
<entry path>
...
}
}
...
<package name> is the base name (no version) of the respective package
(e.g. "haiku"), <entry path> is an installation location relative path
(e.g. "add-ons/Translators/FooTranslator").
Blacklisted entries will be ignored by packagefs, i.e. they won't appear
in the file system. This addresses the issue that it may be necessary to
remove a problematic file (e.g. driver, add-on, or library), which would
otherwise require editing the containing package file.
The settings file is not not "live". Changes take effect only after
reboot (respectively when remounting the concerned packagefs volume).
* get_architectures() returns the primary and the secondary
architectures in one array. That turned out to be convenient.
* Add C++ versions for get[_secondary]_architectures(), returning a
BStringList.
* Add get_architecture(), get_primary_architecture(),
get_secondary_architectures(), guess_architecture_for_path() to get
the caller's architecture, the primary architecture, all secondary
architectures, or the architecture associated with a specified path
respectively.
* Rename the find_path*() functions to find_path*_etc() and add an
optional architecture parameter. Add simplified find_path*()
functions.
* BPathFinder: Add FindPath[s]() versions with an architecture
parameter.
By passing the window pointer to ScreenSaverRunner contructor and using that
to lock the window when drawing instead of getting the window from the
Window() method of the view. This is safer.
Start the screensaver in the window thread instead of the runner
thread so that there is no lock contention for the window lock in
the runner thread when the saver starts.
The view that gets drawn into is assumed to have been prepared before
being passed to the runner thread, and this assumption has been made
true for the screensaver preview and screen_blanker apps.
Eliminate fHasStarted and the corresponding HasStarted() method in
ScreenSaverRunner as they are no longer needed.
Drawing still happens in the runner thread, and still needs to lock
the window thread potentially causing contention, yet, there
is a timeout here so the contention won't freeze the screensaver window,
only delay drawing the screensaver.
Drawing could be moved to the window thread via message passing to avoid
lock contention with the window but this would defeat a big part of the
purpose of having a separate rendering thread.
This fixes#10125 and #4260
* pin idle threads to their specific CPUs
* allow scheduler to implement SMP_MSG_RESCHEDULE handler
* scheduler_set_thread_priority() reworked
* at reschedule: enqueue old thread after dequeueing the new one
* Thread::scheduler_lock protects thread state, priority, etc.
* sThreadCreationLock protects thread creation and removal and list of
threads in team.
* Team::signal_lock and Team::time_lock protect list of threads in team
as well.
* Scheduler uses its own internal locking.
* The UNMAP command is theoretically much faster, as it can get many block
ranges instead of just a single range.
* Furthermore, the ATA TRIM command resembles it much better.
* Therefore, fs_trim_data now gets an array of ranges, and we use SCSI UNMAP
to trim.
* Updated BFS code to collect array ranges to fully support the new
fs_trim_data possibilities.
