There is no branch prediction in TCG, therefore there is no
need to actually include the context number into the predictor.
Therefore all we need to do is add the state for SCXTNUM_ELx.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns branch speculation, which TCG does
not implement. Thus we can trivially enable this feature.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature is AArch64 only, and applies to physical SErrors,
which QEMU does not implement, thus the feature is a nop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check for and defer any pending virtual SError.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Virtual SError exceptions are raised by setting HCR_EL2.VSE,
and are routed to EL1 just like other virtual exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable writes to the TERR and TEA bits when RAS is enabled.
These bits are otherwise RES0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add only the system registers required to implement zero error
records. This means that all values for ERRSELR are out of range,
which means that it and all of the indexed error record registers
need not be implemented.
Add the EL2 registers required for injecting virtual SError.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns changes to the External Debug interface,
with Secure and Non-secure access to the debug registers, and all
of it is outside the scope of QEMU. Indicating support for this
is mandatory with FEAT_SEL2, which we do implement.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only portion of FEAT_Debugv8p2 that is relevant to QEMU
is CONTEXTIDR_EL2, which is also conditionally implemented
with FEAT_VHE. The rest of the debug extension concerns the
External debug interface, which is outside the scope of QEMU.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use FIELD_DP{32,64} to manipulate id_pfr1 and id_aa64pfr0
during arm_cpu_realizefn.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the legacy feature names to the current names.
Provide feature names for id changes that were not marked.
Sort the field updates into increasing bitfield order.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Share the code to set AArch32 max features so that we no
longer have code drift between qemu{-system,}-{arm,aarch64}.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We set this for qemu-system-aarch64, but failed to do so
for the strictly 32-bit emulation.
Fixes: 3bec78447a ("target/arm: Provide ARMv8.4-PMU in '-cpu max'")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of starting with cortex-a15 and adding v8 features to
a v7 cpu, begin with a v8 cpu stripped of its aarch64 features.
This fixes the long-standing to-do where we only enabled v8
features for user-only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously we were defining some of these in user-only mode,
but none of them are accessible from user-only, therefore
define them only in system mode.
This will shortly be used from cpu_tcg.c also.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This register is present for either VHE or Debugv8p2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop zcr_no_el2_reginfo and merge the 3 registers into one array,
now that ZCR_EL2 can be squashed to RES0 and ZCR_EL3 dropped
while registering.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop el3_no_el2_cp_reginfo, el3_no_el2_v8_cp_reginfo, and the local
vpidr_regs definition, and rely on the squashing to ARM_CP_CONST
while registering for v8.
This is a behavior change for v7 cpus with Security Extensions and
without Virtualization Extensions, in that the virtualization cpregs
are now correctly not present. This would be a migration compatibility
break, except that we have an existing bug in which migration of 32-bit
cpus with Security Extensions enabled does not work.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
More gracefully handle cpregs when EL2 and/or EL3 are missing.
If the reg is entirely inaccessible, do not register it at all.
If the reg is for EL2, and EL3 is present but EL2 is not,
either discard, squash to res0, const, or keep unchanged.
Per rule RJFFP, mark the 4 aarch32 hypervisor access registers
with ARM_CP_EL3_NO_EL2_KEEP, and mark all of the EL2 address
translation and tlb invalidation "regs" ARM_CP_EL3_NO_EL2_UNDEF.
Mark the 2 virtualization processor id regs ARM_CP_EL3_NO_EL2_C_NZ.
This will simplify cpreg registration for conditional arm features.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Capstone should be superior to the old libopcode disassembler, so
we can drop the old file nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220412165836.355850-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The ARMv8 manual defines that PMUSERENR_EL0.ER enables read-access
to both PMXEVCNTR_EL0 and PMEVCNTR<n>_EL0 registers, however,
we only use it for PMXEVCNTR_EL0. Extend to PMEVCNTR<n>_EL0 as well.
Signed-off-by: Alex Zuepke <alex.zuepke@tum.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220428132717.84190-1-alex.zuepke@tum.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the aa64 predicate for detecting RAS support from id registers.
We already have the aa32 version from the M-profile work.
Add the 'any' predicate for testing both aa64 and aa32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since e03b56863d, our host endian indicator is unconditionally
set, which means that we can use a normal C condition.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220501055028.646596-20-richard.henderson@linaro.org
[PMM: quote correct git hash in commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Put the block comments into the current coding style.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220501055028.646596-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the override check early, so that it is still done
even when we decide to discard an unreachable cpreg.
Use assert not printf+abort.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220501055028.646596-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Computing isbanked only once makes the code
a bit easier to read.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220501055028.646596-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for these variables.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220501055028.646596-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Put most of the value writeback to the same place,
and improve the comment that goes with them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220501055028.646596-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the computation of key to the top of the function.
Hoist the resolution of cp as well, as an input to the
computation of key.
This will be required by a subsequent patch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220501055028.646596-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simplify freeing cp_regs hash table entries by using a single
allocation for the entire value.
This fixes a theoretical bug if we were to ever free the entire
hash table, because we've been installing string literal constants
into the cpreg structure in define_arm_vh_e2h_redirects_aliases.
However, at present we only free entries created for AArch32
wildcard cpregs which get overwritten by more specific cpregs,
so this bug is never exposed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220501055028.646596-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cast the uint32_t key into a gpointer directly, which
allows us to avoid allocating storage for each key.
Use g_hash_table_lookup when we already have a gpointer
(e.g. for callbacks like count_cpreg), or when using
get_arm_cp_reginfo would require casting away const.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220501055028.646596-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The new_key field is always non-zero -- drop the if.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220501055028.646596-11-richard.henderson@linaro.org
[PMM: reinstated dropped PL3_RW mask]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Give this enum a name and use in ARMCPRegInfo and add_cpreg_to_hashtable.
Add the enumerator ARM_CP_SECSTATE_BOTH to clarify how 0
is handled in define_one_arm_cp_reg_with_opaque.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Give this enum a name and use in ARMCPRegInfo,
add_cpreg_to_hashtable and define_one_arm_cp_reg_with_opaque.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a typedef as well, and use it in ARMCPRegInfo.
This won't be perfect for debugging, but it'll nicely
display the most common cases.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Standardize on g_assert_not_reached() for "should not happen".
Retain abort() when preceeded by fprintf or error_report.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220501055028.646596-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of defining ARM_CP_FLAG_MASK to remove flags,
define ARM_CP_SPECIAL_MASK to isolate special cases.
Sort the specials to the low bits. Use an enum.
Split the large comment block so as to document each
value separately.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220501055028.646596-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These particular data structures are not modified at runtime.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove a possible source of error by removing REGINFO_SENTINEL
and using ARRAY_SIZE (convinently hidden inside a macro) to
find the end of the set of regs being registered or modified.
The space saved by not having the extra array element reduces
the executable's .data.rel.ro section by about 9k.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rearrange the values of the enumerators of CPAccessResult
so that we may directly extract the target el. For the two
special cases in access_check_cp_reg, use CPAccessResult.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move ARMCPRegInfo and all related declarations to a new
internal header, out of the public cpu.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This controls whether the PACI{A,B}SP instructions trap with BTYPE=3
(indirect branch from register other than x16/x17). The linux kernel
sets this in bti_enable().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/998
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220427042312.294300-1-richard.henderson@linaro.org
[PMM: remove stray change to makefile comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- share it between target/arm and target/riscv
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220423023510.30794-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The description in the Arm ARM of the requirements of FEAT_BBM is
admirably clear on the guarantees it provides software, but slightly
more obscure on what that means for implementations. The description
of the equivalent SMMU feature in the SMMU specification (IHI0070D.b
section 3.21.1) is perhaps a bit more detailed and includes some
example valid implementation choices. (The SMMU version of this
feature is slightly tighter than the CPU version: the CPU is permitted
to raise TLB Conflict aborts in some situations that the SMMU may
not. This doesn't matter for QEMU because we don't want to do TLB
Conflict aborts anyway.)
The informal summary of FEAT_BBM is that it is about permitting an OS
to switch a range of memory between "covered by a huge page" and
"covered by a sequence of normal pages" without having to engage in
the 'break-before-make' dance that has traditionally been
necessary. The 'break-before-make' sequence is:
* replace the old translation table entry with an invalid entry
* execute a DSB insn
* execute a broadcast TLB invalidate insn
* execute a DSB insn
* write the new translation table entry
* execute a DSB insn
The point of this is to ensure that no TLB can simultaneously contain
TLB entries for the old and the new entry, which would traditionally
be UNPREDICTABLE (allowing the CPU to generate a TLB Conflict fault
or to use a random mishmash of values from the old and the new
entry). FEAT_BBM level 2 says "for the specific case where the only
thing that changed is the size of the block, the TLB is guaranteed
not to do weird things even if there are multiple entries for an
address", which means that software can now do:
* replace old translation table entry with new entry
* DSB
* broadcast TLB invalidate
* DSB
As the SMMU spec notes, valid ways to do this include:
* if there are multiple entries in the TLB for an address,
choose one of them and use it, ignoring the others
* if there are multiple entries in the TLB for an address,
throw them all out and do a page table walk to get a new one
QEMU's page table walk implementation for Arm CPUs already meets the
requirements for FEAT_BBM level 2. When we cache an entry in our TCG
TLB, we do so only for the specific (non-huge) page that the address
is in, and there is no way for the TLB data structure to ever have
more than one TLB entry for that page. (We handle huge pages only in
that we track what part of the address space is covered by huge pages
so that a TLB invalidate operation for an address in a huge page
results in an invalidation of the whole TLB.) We ignore the Contiguous
bit in page table entries, so we don't have to do anything for the
parts of FEAT_BBM that deal with changis to the Contiguous bit.
FEAT_BBM level 2 also requires that the nT bit in block descriptors
must be ignored; since commit 39a1fd2528 we do this.
It's therefore safe for QEMU to advertise FEAT_BBM level 2 by
setting ID_AA64MMFR2_EL1.BBM to 2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220426160422.2353158-3-peter.maydell@linaro.org
The Arm FEAT_TTL architectural feature allows the guest to provide an
optional hint in an AArch64 TLB invalidate operation about which
translation table level holds the leaf entry for the address being
invalidated. QEMU's TLB implementation doesn't need that hint, and
we correctly ignore the (previously RES0) bits in TLB invalidate
operation values that are now used for the TTL field. So we can
simply advertise support for it in our 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220426160422.2353158-2-peter.maydell@linaro.org
While defining these names, use the correct field width of 5 not 4 for
DBGWCR.MASK. This typo prevented setting a watchpoint larger than 32k.
Reported-by: Chris Howard <cvz185@web.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220427051926.295223-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As of now, cryptographic instructions ISAR fields are never cleared so
we can end up with a cpu with cryptographic instructions but no
floating-point/neon instructions which is not a possible configuration
according to Arm specifications.
In QEMU, we have 3 kinds of cpus regarding cryptographic instructions:
+ no support
+ cortex-a57/a72: cryptographic extension is optional,
floating-point/neon is not.
+ cortex-a53: crytographic extension is optional as well as
floating-point/neon. But cryptographic requires
floating-point/neon support.
Therefore we can safely clear the ISAR fields when neon is disabled.
Note that other Arm cpus seem to follow this. For example cortex-a55 is
like cortex-a53 and cortex-a76/cortex-a710 are like cortex-a57/a72.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220427090117.6954-1-damien.hedde@greensocs.com
[PMM: fixed commit message typos]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-48-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In these cases, 't' did double-duty as zero source and
temporary destination. Split the two uses and narrow
the scope of the temp.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-47-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In these cases, 't' did double-duty as zero source and
temporary destination. Split the two uses.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-46-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-45-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-43-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-42-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-41-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-40-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-39-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-38-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Finish conversion of the file to tcg_constant_*.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-18-richard.henderson@linaro.org
[PMM: Restore incorrectly removed free of t_false in disas_fp_csel()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Existing temp usage treats t1 as both zero and as a
temporary. Rearrange to only require one temporary,
so remove t1 and rename t2.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note that tmp was doing double-duty as zero
and then later as a temporary in its own right.
Split the use of 0 to a new variable 'zero'.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220426163043.100432-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_constant_{i32,i64} as appropriate throughout.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The operation we're performing with the movcond
is either min/max depending on cond -- simplify.
Use tcg_constant_i64 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_constant_{i32,i64} as appropriate throughout.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_constant_{i32,i64} as appropriate throughout.
This fixes a bug in trans_VSCCLRM() where we were leaking a TCGv.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The length of the previous insn may be computed from
the difference of start and end addresses.
Use tcg_constant_i32 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_gen_umin_i32 instead of tcg_gen_movcond_i32.
Use tcg_constant_i32 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of computing
tmp1 = shift & 0xff;
dest = (tmp1 > 0x1f ? 0 : value) << (tmp1 & 0x1f)
use
tmpd = value << (shift & 0x1f);
dest = shift & 0xe0 ? 0 : tmpd;
which has a flatter dependency tree.
Use tcg_constant_i32 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For aa32, the function has a parameter to use the new el.
For aa64, that never happens.
Use tcg_constant_i32 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Common code for reset_btype and set_btype.
Use tcg_constant_i32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is incorrect in that it does not properly consider
CPTR_EL2.FPEN. We've already got another mechanism for raising
an FPU access trap: ARM_CP_FPU, so use that instead.
Remove CP_ACCESS_TRAP_FP_EL{2,3}, which becomes unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Adjust the assignments to use true/false.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Move the member down in the struct to keep the
bool type members together and remove a hole.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we assume all fields are 32-bit.
Prepare for fields of a single byte, using sizeof_field().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: use sizeof_field() instead of raw sizeof()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Adjust the assignments to use true/false.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Move the member down in the struct to keep the
bool type members together and remove a hole.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update SCTLR_ELx fields per ARM DDI0487 H.a.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update SCR_EL3 fields per ARM DDI0487 H.a.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update isar fields per ARM DDI0487 H.a.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In a GICv3, it is impossible for the GIC to deliver a VIRQ or VFIQ to
the CPU unless the CPU has EL2, because VIRQ and VFIQ are only
configurable via EL2-only system registers. Moreover, in our
implementation we were only calculating and updating the state of the
VIRQ and VFIQ lines in gicv3_cpuif_virt_irq_fiq_update() when those
EL2 system registers changed. We were therefore able to assert in
arm_cpu_set_irq() that we didn't see a VIRQ or VFIQ line update if
EL2 wasn't present.
This assumption no longer holds with GICv4:
* even if the CPU does not have EL2 the guest is able to cause the
GIC to deliver a virtual LPI by programming the ITS (which is a
silly thing for it to do, but possible)
* because we now need to recalculate the state of the VIRQ and VFIQ
lines in more cases than just "some EL2 GIC sysreg was written",
we will see calls to arm_cpu_set_irq() for "VIRQ is 0, VFIQ is 0"
even if the guest is not using the virtual LPI parts of the ITS
Remove the assertions, and instead simply ignore the state of the
VIRQ and VFIQ lines if the CPU does not have EL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-6-peter.maydell@linaro.org
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
This header only defines the tcg_allowed variable and the tcg_enabled()
function - which are not required in many files that include this
header. Drop the #include statement there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220315144107.1012530-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the implementation unit is page-vary.c.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In gen_store_exclusive(), if the host does not have a cmpxchg128
primitive then we generate bad code for STXP for storing two 64-bit
values. We generate a call to the exit_atomic helper, which never
returns, and set is_jmp to DISAS_NORETURN. However, this is
forgetting that we have already emitted a brcond that jumps over this
call for the case where we don't hold the exclusive. The effect is
that we don't generate any code to end the TB for the
exclusive-not-held execution path, which falls into the "exit with
TB_EXIT_REQUESTED" code that gen_tb_end() emits. This then causes an
assert at runtime when cpu_loop_exec_tb() sees an EXIT_REQUESTED TB
return that wasn't for an interrupt or icount.
In particular, you can hit this case when using the clang sanitizers
and trying to run the xlnx-versal-virt acceptance test in 'make
check-acceptance'. This bug was masked until commit 848126d11e
("meson: move int128 checks from configure") because we used to set
CONFIG_CMPXCHG128=1 and avoid the buggy codepath, but after that we
do not.
Fix the bug by not setting is_jmp. The code after the exit_atomic
call up to the fail_label is dead, but TCG is smart enough to
eliminate it. We do need to set 'tmp' to some valid value, though
(in the same way the exit_atomic-using code in tcg/tcg-op.c does).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/953
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220331150858.96348-1-peter.maydell@linaro.org
As per the AArch64.S2Walk() pseudo-code in the ARMv8 ARM, the final
decision as to the output address's PA space based on the SA/SW/NSA/NSW
bits needs to take the input IPA's PA space into account, and not the
PA space of the result of the stage 2 walk itself.
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220327093427.1548629-4-idan.horowitz@gmail.com
[PMM: fixed commit message typo]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As per the AArch64.SS2InitialTTWState() psuedo-code in the ARMv8 ARM the
initial PA space used for stage 2 table walks is assigned based on the SW
and NSW bits of the VSTCR and VTCR registers.
This was already implemented for the recursive stage 2 page table walks
in S1_ptw_translate(), but was missing for the final stage 2 walk.
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220327093427.1548629-3-idan.horowitz@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As per the AArch64.SS2OutputPASpace() psuedo-code in the ARMv8 ARM when the
PA space of the IPA is non secure, the output PA space is secure if and only
if all of the bits VTCR.<NSW, NSA>, VSTCR.<SW, SA> are not set.
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220327093427.1548629-2-idan.horowitz@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While not mentioned anywhere in the actual specification text, the
HCR_EL2.ATA bit is treated as '1' when EL2 is disabled at the current
security state. This can be observed in the psuedo-code implementation
of AArch64.AllocationTagAccessIsEnabled().
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220328173107.311267-1-idan.horowitz@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both of these functions missed handling the TLB_MMIO flag
during the conversion to handle MTE.
Fixes: 10a85e2c8a ("target/arm: Reuse sve_probe_page for gather loads")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/925
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220324010932.190428-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the rvbar property settable after realize. This is done
in preparation to model the ZynqMP's runtime configurable rvbar.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220316164645.2303510-3-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For M-profile, the fault address is not always exposed to the guest
in a fault register (for instance the BFAR bus fault address register
is only updated for bus faults on data accesses, not instruction
accesses). Currently we log the address only if we're putting it
into a particular guest-visible register. Since we always have it,
log it generically, to make logs of i-side faults a bit clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220315204306.2797684-3-peter.maydell@linaro.org
Currently the CPU_LOG_INT logging misses some useful information
about loads from the vector table. Add logging where we load vector
table entries. This is particularly helpful for cases where the user
has accidentally not put a vector table in their image at all, which
can result in confusing guest crashes at startup.
Here's an example of the new logging for a case where
the vector table contains garbage:
Loaded reset SP 0x0 PC 0x0 from vector table
Loaded reset SP 0xd008f8df PC 0xf000bf00 from vector table
Taking exception 3 [Prefetch Abort] on CPU 0
...with CFSR.IACCVIOL
...BusFault with BFSR.STKERR
...taking pending nonsecure exception 3
...loading from element 3 of non-secure vector table at 0xc
...loaded new PC 0x20000558
----------------
IN:
0x20000558: 08000079 stmdaeq r0, {r0, r3, r4, r5, r6}
(The double reset logging is the result of our long-standing
"CPUs all get reset twice" weirdness; it looks a bit ugly
but it'll go away if we ever fix that :-))
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220315204306.2797684-2-peter.maydell@linaro.org
LPAE descriptors come in three forms:
* table descriptors, giving the address of the next level page table
* page descriptors, which occur only at level 3 and describe the
mapping of one page (which might be 4K, 16K or 64K)
* block descriptors, which occur at higher page table levels, and
describe the mapping of huge pages
QEMU's page-table-walk code treats block and page entries
identically, simply ORing in a number of bits from the input virtual
address that depends on the level of the page table that we stopped
at; we depend on the previous masking of descaddr with descaddrmask
to have already cleared out the low bits of the descriptor word.
This is not quite right: the address field in a block descriptor is
smaller, and so there are bits which are valid address bits in a page
descriptor or a table descriptor but which are not supposed to be
part of the address in a block descriptor, and descaddrmask does not
clear them. We previously mostly got away with this because those
descriptor bits are RES0; however with FEAT_BBM (part of Armv8.4)
block descriptor bit 16 is defined to be the nT bit. No emulated
QEMU CPU has FEAT_BBM yet, but if the host CPU has it then we might
see it when using KVM or hvf.
Explicitly zero out all the descaddr bits we're about to OR vaddr
bits into.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/790
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220304165628.2345765-1-peter.maydell@linaro.org
When arm_is_el2_enabled was introduced, we missed
updating pauth_check_trap.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/788
Fixes: e6ef016926 ("target/arm: use arm_is_el2_enabled() where applicable")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220315021205.342768-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For both ldnt1 and stnt1, the meaning of the Rn and Rm are different
from ld1 and st1: the vector and integer registers are reversed, and
the integer register 31 refers to XZR instead of SP.
Secondly, the 64-bit version of ldnt1 was being interpreted as
32-bit unpacked unscaled offset instead of 64-bit unscaled offset,
which discarded the upper 32 bits of the address coming from
the vector argument.
Thirdly, validate that the memory element size is in range for the
vector element size for ldnt1. For ld1, we do this via independent
decode patterns, but for ldnt1 we need to do it manually.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/826
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220308031655.240710-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
-----BEGIN PGP SIGNATURE-----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=ix0J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220307' into staging
target-arm queue:
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
# gpg: Signature made Mon 07 Mar 2022 16:46:06 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220307:
hw/arm/virt: Disable LPA2 for -machine virt-6.2
target/arm: Provide cpu property for controling FEAT_LPA2
ui/cocoa: Use the standard about panel
hw/intc/arm_gicv3_cpuif: Fix register names in ICV_HPPIR read trace event
hw/intc/arm_gicv3: Fix missing spaces in error log messages
hw/intc/arm_gicv3: Specify valid and impl in MemoryRegionOps
hw/intc/arm_gicv3_its: Add trace events for table reads and writes
hw/intc/arm_gicv3_its: Add trace events for commands
target/arm/translate-neon: Simplify align field check for VLD3
target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
osdep: Move memalign-related functions to their own header
util: Put qemu_vfree() in memalign.c
util: Use meson checks for valloc() and memalign() presence
util: Share qemu_try_memalign() implementation between POSIX and Windows
meson.build: Don't misdetect posix_memalign() on Windows
util: Return valid allocation for qemu_try_memalign() with zero size
util: Unify implementations of qemu_memalign()
util: Make qemu_oom_check() a static function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG, allow
the feature to be disabled from -cpu max.
Since this kernel bug is present in the Fedora 31 image that
we test in avocado, disable lpa2 on the command-line.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For VLD3 (single 3-element structure to one lane), there is no
alignment specification and the alignment bits in the instruction
must be zero. This is bit [4] for the size=0 and size=1 cases, and
bits [5:4] for the size=2 case. We do this check correctly in
VLDST_single(), but we write it a bit oddly: in the 'case 3' code we
check for bit 0 of a->align (bit [4] of the insn), and then we fall
through to the 'case 2' code which checks bit 1 of a->align (bit [5]
of the insn) in the size 2 case. Replace this with just checking "is
a->align non-zero" for VLD3, which lets us drop the fall-through and
put the cases in this switch in numerical order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303113741.2156877-3-peter.maydell@linaro.org
For VLD1/VST1 (single element to one lane) we are only accessing one
register, and so the 'stride' is meaningless. The bits that would
specify stride (insn bit [4] for size=1, bit [6] for size=2) are
specified to be zero in the encoding (which would correspond to a
stride of 1 for VLD2/VLD3/VLD4 etc), and we must UNDEF if they are
not.
We failed to make this check, which meant that we would incorrectly
handle some instruction patterns as loads or stores instead of
UNDEFing them. Enforce that stride == 1 for the nregs == 1 case.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/890
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303113741.2156877-2-peter.maydell@linaro.org
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
When we're using KVM, the PSCI implementation is provided by the
kernel, but QEMU has to tell the guest about it via the device tree.
Currently we look at the KVM_CAP_ARM_PSCI_0_2 capability to determine
if the kernel is providing at least PSCI 0.2, but if the kernel
provides a newer version than that we will still only tell the guest
it has PSCI 0.2. (This is fairly harmless; it just means the guest
won't use newer parts of the PSCI API.)
The kernel exposes the specific PSCI version it is implementing via
the ONE_REG API; use this to report in the dtb that the PSCI
implementation is 1.0-compatible if appropriate. (The device tree
binding currently only distinguishes "pre-0.2", "0.2-compatible" and
"1.0-compatible".)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220224134655.1207865-1-peter.maydell@linaro.org
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
4k or 16k pages.
This introduces the DS bit to TCR_ELx, which is RES0 unless the
page size is enabled and supports LPA2, resulting in the effective
value of DS for a given table walk. The DS bit changes the format
of the page table descriptor slightly, moving the PS field out to
TCR so that all pages have the same sharability and repurposing
those bits of the page table descriptor for the highest bits of
the output address.
Do not yet enable FEAT_LPA2; we need extra plumbing to avoid
tickling an old kernel bug.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We support 16k pages, but do not advertize that in ID_AA64MMFR0.
The value 0 in the TGRAN*_2 fields indicates that stage2 lookups defer
to the same support as stage1 lookups. This setting is deprecated, so
indicate support for all stage2 page sizes directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220301215958.157011-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For FEAT_LPA2, we will need other ARMVAParameters, which themselves
depend on the translation granule in use. We might as well validate
that the given TG matches; the architecture "does not require that
the instruction invalidates any entries" if this is not true.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The shift of the BaseADDR field depends on the translation
granule in use.
Fixes: 84940ed825 ("target/arm: Add support for FEAT_TLBIRANGE")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Merge tlbi_aa64_range_get_length and tlbi_aa64_range_get_base,
returning a structure containing both results. Pass in the
ARMMMUIdx, rather than the digested two_ranges boolean.
This is in preparation for FEAT_LPA2, where the interpretation
of 'value' depends on the effective value of DS for the regime.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With FEAT_LPA2, rather than introducing translation level 4,
we introduce level -1, below the current level 0. Extend
arm_fi_to_lfsc to handle these faults.
Assert that this new translation level does not leak into
fault types for which it is not defined, which allows some
masking of fi->level to be removed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
64k pages. The only thing left at this point is to handle the
extra bits in the TTBR and in the table descriptors.
Note that PAR_EL1 and HPFAR_EL2 are nominally extended, but we don't
mask out the high bits when writing to those registers, so no changes
are required there.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature is relatively small, as it applies only to
64k pages and thus requires no additional changes to the
table descriptor walking algorithm, only a change to the
minimum TSZ (which is the inverse of the maximum virtual
address space size).
Note that this feature widens VBAR_ELx, but we already
treat the register as being 64 bits wide.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The original A.a revision of the AArch64 ARM required that we
force-extend the addresses in these registers from 49 bits.
This language has been loosened via a combination of IMPLEMENTATION
DEFINED and CONSTRAINTED UNPREDICTABLE to allow consideration of
the entire aligned address.
This means that we do not have to consider whether or not FEAT_LVA
is enabled, and decide from which bit an address might need to be
extended.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This field controls the output (intermediate) physical address size
of the translation process. V8 requires to raise an AddressSize
fault if the page tables are programmed incorrectly, such that any
intermediate descriptor address, or the final translated address,
is out of range.
Add a PS field to ARMVAParameters, and properly compute outputsize
in get_phys_addr_lpae. Test the descaddr as extracted from TTBR
and from page table entries.
Restrict descaddrmask so that we won't raise the fault for v7.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The macro is a bit more readable than the inlined computation.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass down the width of the output address from translation.
For now this is still just PAMax, but a subsequent patch will
compute the correct value from TCR_ELx.{I}PS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will shortly share parts of this function with other portions
of address translation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without FEAT_LVA, the behaviour of programming an invalid value
is IMPLEMENTATION DEFINED. With FEAT_LVA, programming an invalid
minimum value requires a Translation fault.
It is most self-consistent to choose to generate the fault always.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set this as the kernel would, to 48 bits, to keep the computation
of the address space correct for PAuth.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
handle_simd_shift_fpint_conv() was accidentally freeing the TCG
temporary tcg_fpstatus too early, before the last use of it. Move
the free down to where it belongs.
Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: cleaned up commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support the latest PSCI on TCG and HVF. A 64-bit function called from
AArch32 now returns NOT_SUPPORTED, which is necessary to adhere to SMC
Calling Convention 1.0. It is still not compliant with SMCCC 1.3 since
they do not implement mandatory functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220213035753.34577-1-akihiko.odaki@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: update MISMATCH_CHECK checks on PSCI_VERSION macros to match]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Some small fixes for the qtests
* Misc header cleanups by Philippe
-----BEGIN PGP SIGNATURE-----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=/azS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-02-21' into staging
* Improve virtio-net failover test
* Some small fixes for the qtests
* Misc header cleanups by Philippe
# gpg: Signature made Mon 21 Feb 2022 11:40:37 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-02-21: (25 commits)
hw/tricore: Remove unused and incorrect header
hw/m68k/mcf: Add missing 'exec/hwaddr.h' header
exec/exec-all: Move 'qemu/log.h' include in units requiring it
softmmu/runstate: Clean headers
linux-user: Add missing "qemu/timer.h" include
target: Add missing "qemu/timer.h" include
core/ptimers: Remove unnecessary 'sysemu/cpus.h' include
exec/ramblock: Add missing includes
qtest: Add missing 'hw/qdev-core.h' include
hw/acpi/memory_hotplug: Remove unused 'hw/acpi/pc-hotplug.h' header
hw/remote: Add missing include
hw/tpm: Clean includes
scripts: Remove the old switch-timer-api script
tests/qtest: failover: migration abort test with failover off
tests/qtest: failover: test migration if the guest doesn't support failover
tests/qtest: failover: check migration with failover off
tests/qtest: failover: check missing guest feature
tests/qtest: failover: check the feature is correctly provided
tests/qtest: failover: use a macro for check_one_card()
tests/qtest: failover: clean up pathname of tests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we don't allow guests under hvf to use the PAuth extension,
because we didn't have any special code to handle that, and therefore
in arm_cpu_pauth_finalize() we will sanitize the ID_AA64ISAR1 value
the guest sees to clear the PAuth related fields.
Add support for this in the same way that KVM does it, by defaulting
to "PAuth enabled" if the host CPU has it and allowing the user to
disable it via '-cpu pauth=no' on the command line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-7-peter.maydell@linaro.org
Currently when using hvf we mishandle '-cpu max': we fall through to
the TCG version of its initfn, which then sets a lot of feature bits
that the real host CPU doesn't have. The hvf accelerator code then
exposes these bogus ID register values to the guest because it
doesn't check that the host really has the features.
Make '-cpu host' be like '-cpu max' for hvf, as we do with kvm.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-6-peter.maydell@linaro.org
Now that the if() branch of the condition in aarch64_max_initfn()
returns early, we don't need to keep the rest of the code in
the function inside an else block. Remove the else, unindenting
that code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-5-peter.maydell@linaro.org
Currently for KVM the intention is that '-cpu max' and '-cpu host'
are the same thing, but because we did this with two separate
pieces of code they have got a little bit out of sync. Specifically,
'max' has a 'sve-max-vq' property, and 'host' does not.
Bring the two together by having the initfn for 'max' actually
call the initfn for 'host'. This will result in 'max' no longer
exposing the 'sve-max-vq' property when using KVM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-4-peter.maydell@linaro.org
Use the aarch64_cpu_register() machinery to register the 'host' CPU
type. This doesn't gain us anything functionally, but it does mean
that the code for initializing it looks more like that for the other
CPU types, in that its initfn then doesn't need to call
arm_cpu_post_init() (because aarch64_cpu_instance_init() does that
for it).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-3-peter.maydell@linaro.org
Now that KVM has dropped AArch32 host support, the 'host' CPU type is
always AArch64, and we can move it to cpu64.c. This move will allow
us to share code between it and '-cpu max', which should behave
the same as '-cpu host' when using KVM or HVF.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-2-peter.maydell@linaro.org
Recent Linux versions added support to read ID_AA64ISAR2_EL1. On M1,
those reads trap into QEMU which handles them as faults.
However, AArch64 ID registers should always read as RES0. Let's
handle them accordingly.
This fixes booting Linux 5.17 guests.
Cc: qemu-stable@nongnu.org
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20220209124135.69183-2-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are parsing the syndrome field for sysregs in multiple places across
the hvf code, but repeat shift/mask operations with hard coded constants
every time. This is an error prone approach and makes it harder to reason
about the correctness of these operations.
Let's introduce macros that allow us to unify the constants used as well
as create new helpers to extract fields from the sysreg value.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Cameron Esfahani <dirty@apple.com <mailto:dirty@apple.com>>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220209124135.69183-1-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
timer_new_ns(), cpu_get_host_ticks() and NANOSECONDS_PER_SECOND are
declared in "qemu/timer.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220207082756.82600-8-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The recently introduced debug tests in kvm-unit-tests exposed an error
in our handling of singlestep cause by stale hflags. This is caught by
--enable-debug-tcg when running the tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Andrew Jones <drjones@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220202122353.457084-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMCCC 1.3 spec section 5.2 says
The Unknown SMC Function Identifier is a sign-extended value of (-1)
that is returned in the R0, W0 or X0 registers. An implementation must
return this error code when it receives:
* An SMC or HVC call with an unknown Function Identifier
* An SMC or HVC call for a removed Function Identifier
* An SMC64/HVC64 call from AArch32 state
To comply with these statements, let's always return -1 when we encounter
an unknown HVC or SMC call.
[PMM:
This is a reinstatement of commit 9fcd15b919, previously
reverted in commit 4825eaae4fdd56fba0f; we can do this now that we
have arranged for all the affected board models to not enable the
PSCI emulation if they are running guest code at EL3. This avoids
the regressions that caused us to revert the change for 7.0.]
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to allow the psci-conduit property to be set after realize,
because the parts of the code which are best placed to decide if it's
OK to enable QEMU's builtin PSCI emulation (the board code and the
arm_load_kernel() function are distant from the code which creates
and realizes CPUs (typically inside an SoC object's init and realize
method) and run afterwards.
Since the DEFINE_PROP_* macros don't have support for creating
properties which can be changed after realize, change the property to
be created with object_property_add_uint32_ptr(), which is what we
already use in this function for creating settable-after-realize
properties like init-svtor and init-nsvtor.
Note that it doesn't conceptually make sense to change the setting of
the property after the machine has been completely initialized,
beacuse this would mean that the behaviour of the machine when first
started would differ from its behaviour when the system is
subsequently reset. (It would also require the underlying state to
be migrated, which we don't do.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20220127154639.2090164-2-peter.maydell@linaro.org
Use the named bit rather than a bare extract32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220127063428.30212-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When HCR_EL2.E2H is set, the format of CPTR_EL2 changes to
look more like CPACR_EL1, with ZEN and FPEN fields instead
of TZ and TFP fields.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220127063428.30212-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extract entire fields for ZEN and FPEN, rather than testing specific bits.
This makes it easier to follow the code versus the ARM spec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220127063428.30212-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The exception caused by an SVC instruction may be taken to AArch32
Hyp mode for two reasons:
* HCR.TGE indicates that exceptions from EL0 should trap to EL2
* we were already in Hyp mode
The entrypoint in the vector table to be used differs in these two
cases: for an exception routed to Hyp mode from EL0, we enter at the
common 0x14 "hyp trap" entrypoint. For SVC from Hyp mode to Hyp
mode, we enter at the 0x08 (svc/hvc trap) entrypoint.
In the v8A Arm ARM pseudocode this is done in AArch32.TakeSVCException.
QEMU incorrectly routed both of these exceptions to the 0x14
entrypoint. Correct the entrypoint for SVC from Hyp to Hyp by making
use of the existing logic which handles "normal entrypoint for
Hyp-to-Hyp, otherwise 0x14" for traps like UNDEF and data/prefetch
aborts (reproduced here since it's outside the visible context
in the diff for this commit):
if (arm_current_el(env) != 2 && addr < 0x14) {
addr = 0x14;
}
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220117131953.3936137-1-peter.maydell@linaro.org
In an SMP system it can be unclear which CPU is taking an exception;
add the CPU index (which is the same value used in the TCG 'Trace
%d:' logging) to the "Taking exception" log line to clarify it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-2-peter.maydell@linaro.org
Add basic support for Pointer Authentication when running a KVM
guest and that the host supports it, loosely based on the SVE
support.
Although the feature is enabled by default when the host advertises
it, it is possible to disable it by setting the 'pauth=off' CPU
property. The 'pauth' comment is removed from cpu-features.rst,
as it is now common to both TCG and KVM.
Tested on an Apple M1 running 5.16-rc6.
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220107150154.2490308-1-maz@kernel.org
[PMM: fixed indentation]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some of the instructions added by the FEAT_TLBIOS extension were forgotten
when the extension was originally added to QEMU.
Fixes: 7113d61850 ("target/arm: Add support for FEAT_TLBIOS")
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211231103928.1455657-1-idan.horowitz@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The calculation of the length of TLB range invalidate operations
in tlbi_aa64_range_get_length() is incorrect in two ways:
* the NUM field is 5 bits, but we read only 4 bits
* we miscalculate the page_shift value, because of an
off-by-one error:
TG 0b00 is invalid
TG 0b01 is 4K granule size == 4096 == 2^12
TG 0b10 is 16K granule size == 16384 == 2^14
TG 0b11 is 64K granule size == 65536 == 2^16
so page_shift should be (TG - 1) * 2 + 12
Thanks to the bug report submitter Cha HyunSoo for identifying
both these errors.
Fixes: 84940ed825 ("target/arm: Add support for FEAT_TLBIRANGE")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/734
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20211130173257.1274194-1-peter.maydell@linaro.org
Both single-step and pc alignment faults have priority over
breakpoint exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Misaligned thumb PC is architecturally impossible.
Assert is better than proceeding, in case we've missed
something somewhere.
Expand a comment about aligning the pc in gdbstub.
Fail an incoming migrate if a thumb pc is misaligned.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For A64, any input to an indirect branch can cause this.
For A32, many indirect branch paths force the branch to be aligned,
but BXWritePC does not. This includes the BX instruction but also
other interworking changes to PC. Prior to v8, this case is UNDEFINED.
With v8, this is CONSTRAINED UNPREDICTABLE and may either raise an
exception or force align the PC.
We choose to raise an exception because we have the infrastructure,
it makes the generated code for gen_bx simpler, and it has the
possibility of catching more guest bugs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will reuse this section of arm_deliver_fault for
raising pc alignment faults.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The size of the code covered by a TranslationBlock cannot be 0;
this is checked via assert in tb_gen_code.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create arm_check_ss_active and arm_check_kernelpage.
Reverse the order of the tests. While it doesn't matter in practice,
because only user-only has a kernel page and user-only never sets
ss_active, ss_active has priority over execution exceptions and it
is best to keep them in the proper order.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 9fcd15b919.
This change turns out to cause regressions, for instance on the
imx6ul boards as described here:
https://lore.kernel.org/qemu-devel/c8b89685-7490-328b-51a3-48711c140a84@tribudubois.net/
The primary cause of that regression is that the guest code running
at EL3 expects SMCs (not related to PSCI) to do what they would if
our PSCI emulation was not present at all, but after this change
they instead set a value in R0/X0 and continue.
We could fix that by a refactoring that allowed us to only turn on
the PSCI emulation if we weren't booting the guest at EL3, but there
is a more tangled problem with the highbank board, which:
(1) wants to enable PSCI emulation
(2) has a bit of guest code that it wants to run at EL3 and
to perform SMC calls that trap to the monitor vector table:
this is the boot stub code that is written to memory by
arm_write_secure_board_setup_dummy_smc() and which the
highbank board enables by setting bootinfo->secure_board_setup
We can't satisfy both of those and also have the PSCI emulation
handle all SMC instruction executions regardless of function
identifier value.
This is too tricky to try to sort out before 6.2 is released;
revert this commit so we can take the time to get it right in
the 7.0 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211119163419.557623-1-peter.maydell@linaro.org
Add gdb-xml for MVE
More uses of tcg_constant_* in target/arm
Fix parameter naming for default-bus-bypass-iommu
Ignore cache operations to mmio in HVF
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmGBgjkdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8sAAgAsHaW2sHH/W4TzCwl
DfqFar4u047Q+ZtQHjNehGHF9Bxp4NS4A0qL52vk0hVoqeWlyF1N29MOnewgVDqY
q1x+uxJtG9xjTse7oEEshEEFF/7J8eB8dN4E78TFn/6IhvVhGiUeeRu29s44Ot6N
E2KABcXfd+4gEdqhepLGEbi5n0TnA8ARmmeffZNWVEbsxQjHnMQQYmqGmllB3xV3
qPpnp3avvD1015zMwrLVmlDO+tSRr/1bed7k3k26ebga2B/zitxcpXFNCDlgePx0
LNT5QYvBDpE7HOruGQjf4iXPJHfYw5VMtopK7K++rY9KWiJgBVSjQUcB462sdCPk
wNAp0g==
=vlZ5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-arm-20211102-2' into staging
Add nuvoton sd module for NPCM7XX
Add gdb-xml for MVE
More uses of tcg_constant_* in target/arm
Fix parameter naming for default-bus-bypass-iommu
Ignore cache operations to mmio in HVF
# gpg: Signature made Tue 02 Nov 2021 02:23:53 PM EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* remotes/rth/tags/pull-arm-20211102-2:
hvf: arm: Ignore cache operations on MMIO
hw/arm/virt: Rename default_bus_bypass_iommu
target/arm: Use tcg_constant_i32() in gen_rev16()
target/arm: Use tcg_constant_i64() in do_sat_addsub_64()
target/arm: Use the constant variant of store_cpu_field() when possible
target/arm: Introduce store_cpu_field_constant() helper
target/arm: Use tcg_constant_i32() in op_smlad()
target/arm: Advertise MVE to gdb when present
tests/qtest/libqos: add SDHCI commands
hw/arm: Attach MMC to quanta-gbs-bmc
hw/arm: Add Nuvoton SD module to board
hw/sd: add nuvoton MMC
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Apple's Hypervisor.Framework forwards cache operations as MMIO traps
into user space. For MMIO however, these have no meaning: There is no
cache attached to them.
So let's just treat cache data exits as nops.
This fixes OpenBSD booting as guest.
Reported-by: AJ Barris <AwlsomeAlex@github.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reference: https://github.com/utmapp/UTM/issues/3197
Message-Id: <20211026071241.74889-1-agraf@csgraf.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the mask is a constant value, use tcg_constant_i32()
instead of a TCG temporary.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211029231834.2476117-6-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The immediate value used for comparison is constant and
read-only. Move it to the constant pool. This frees a
TCG temporary for unsigned saturation opcodes.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211029231834.2476117-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When using a constant variable, we can replace the store_cpu_field()
call by store_cpu_field_constant() which avoid using TCG temporaries.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211029231834.2476117-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similarly to the store_cpu_field() helper which takes a TCG
temporary, store its value to the CPUState, introduce the
store_cpu_field_constant() helper which store a constant to
CPUState (without using any TCG temporary).
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211029231834.2476117-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid using a TCG temporary for a read-only constant.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211029231834.2476117-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cortex-M CPUs with MVE should advertise this fact to gdb, using the
org.gnu.gdb.arm.m-profile-mve XML feature, which defines the VPR
register. Presence of this feature also tells gdb to create
pseudo-registers Q0..Q7, so we do not need to tell gdb about them
separately.
Note that unless you have a very recent GDB that includes this fix:
http://patches-tcwg.linaro.org/patch/58133/ gdb will mis-print the
individual fields of the VPR register as zero (but showing the whole
thing as hex, eg with "print /x $vpr" will give the correct value).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211101160814.5103-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because of the complexity of setting ESR, re-use the existing
arm_cpu_do_unaligned_access function. This means we have to
handle the exception ourselves in cpu_loop, transforming it
to the appropriate signal.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because of the complexity of setting ESR, continue to use
arm_deliver_fault. This means we cannot remove the code
within cpu_loop that decodes EXCP_DATA_ABORT and
EXCP_PREFETCH_ABORT.
But using the new hook means that we don't have to do the
page_get_flags check manually, and we'll be able to restrict
the tlb_fill hook to sysemu later.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the new os interface for raising the exception,
rather than calling arm_cpu_tlb_fill directly.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The named function no longer exists.
Refer to host_signal_handler instead.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The helper_*_mmu functions were the only thing available
when this code was written. This could have been adjusted
when we added cpu_*_mmuidx_ra, but now we can most easily
use the newest set of interfaces.
Cc: qemu-arm@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The previous placement in tcg/tcg.h was not logical.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to move this out of tcg.h, so rename it
as we did when moving MemOp.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have lacked expressive support for memory sizes larger
than 64-bits for a while. Fixing that requires adjustment
to several points where we used this for array indexing,
and two places that develop -Wswitch warnings after the change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Provide a name field for all the memory listeners. It can be used to identify
which memory listener is which.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210817013553.30584-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we send VFP XML which includes D0..D15 or D0..D31, plus
FPSID, FPSCR and FPEXC. The upstream GDB tolerates this, but its
definition of this XML feature does not include FPSID or FPEXC. In
particular, for M-profile cores there are no FPSID or FPEXC
registers, so advertising those is wrong.
Move FPSID and FPEXC into their own bit of XML which we only send for
A and R profile cores. This brings our definition of the XML
org.gnu.gdb.arm.vfp feature into line with GDB's own (at least for
non-Neon cores...) and means we don't claim to have FPSID and FPEXC
on M-profile.
(It seems unlikely to me that any gdbstub users really care about
being able to look at FPEXC and FPSID; but we've supplied them to gdb
for a decade and it's not hard to keep doing so.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210921162901.17508-5-peter.maydell@linaro.org
Currently helper.c includes some code which is part of the arm
target's gdbstub support. This code has a better home: in gdbstub.c
and gdbstub64.c. Move it there.
Because aarch64_fpu_gdb_get_reg() and aarch64_fpu_gdb_set_reg() move
into gdbstub64.c, this means that they're now compiled only for
TARGET_AARCH64 rather than always. That is the only case when they
would ever be used, but it does mean that the ifdef in
arm_cpu_register_gdb_regs_for_features() needs to be adjusted to
match.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210921162901.17508-4-peter.maydell@linaro.org
We're going to move this code to a different file; fix the coding
style first so checkpatch doesn't complain. This includes deleting
the spurious 'break' statements after returns in the
vfp_gdb_get_reg() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210921162901.17508-3-peter.maydell@linaro.org
The SMCCC 1.3 spec section 5.2 says
The Unknown SMC Function Identifier is a sign-extended value of (-1)
that is returned in the R0, W0 or X0 registers. An implementation must
return this error code when it receives:
* An SMC or HVC call with an unknown Function Identifier
* An SMC or HVC call for a removed Function Identifier
* An SMC64/HVC64 call from AArch32 state
To comply with these statements, let's always return -1 when we encounter
an unknown HVC or SMC call.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we may have had some thought of allowing system-mode
to return from this hook, we have no guests that require this.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing target specific about this. The implementation
is host specific, but the declaration is 100% common.
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Optimize the MVE 1op-immediate insns (VORR, VBIC, VMOV) to
use TCG vector ops when possible.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-13-peter.maydell@linaro.org
Optimize the MVE shift-and-insert insns by using TCG
vector ops when possible.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-12-peter.maydell@linaro.org
Optimize the MVE VSHLL insns by using TCG vector ops when possible.
This includes the VMOVL insn, which we handle in mve.decode as "VSHLL
with zero shift count".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-11-peter.maydell@linaro.org
Optimize the MVE VSHL and VSHR immediate forms by using TCG vector
ops when possible.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-10-peter.maydell@linaro.org
Optimize the MVE VMVN insn by using TCG vector ops when possible.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-9-peter.maydell@linaro.org
Optimize the MVE VDUP insns by using TCG vector ops when possible.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-8-peter.maydell@linaro.org
Optimize the MVE VNEG and VABS insns by using TCG
vector ops when possible.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-7-peter.maydell@linaro.org
Optimize MVE arithmetic ops when we have a TCG
vector operation we can use.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-6-peter.maydell@linaro.org
When not predicating, implement the MVE bitwise logical insns
directly using TCG vector operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-5-peter.maydell@linaro.org
Our current codegen for MVE always calls out to helper functions,
because some byte lanes might be predicated. The common case is that
in fact there is no predication active and all lanes should be
updated together, so we can produce better code by detecting that and
using the TCG generic vector infrastructure.
Add a TB flag that is set when we can guarantee that there is no
active MVE predication, and a bool in the DisasContext. Subsequent
patches will use this flag to generate improved code for some
instructions.
In most cases when the predication state changes we simply end the TB
after that instruction. For the code called from vfp_access_check()
that handles lazy state preservation and creating a new FP context,
we can usually avoid having to try to end the TB because luckily the
new value of the flag following the register changes in those
sequences doesn't depend on any runtime decisions. We do have to end
the TB if the guest has enabled lazy FP state preservation but not
automatic state preservation, but this is an odd corner case that is
not going to be common in real-world code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-4-peter.maydell@linaro.org
Architecturally, for an M-profile CPU with the LOB feature the
LTPSIZE field in FPDSCR is always constant 4. QEMU's implementation
enforces this everywhere, except that we don't check that it is true
in incoming migration data.
We're going to add come in gen_update_fp_context() which relies on
the "always 4" property. Since this is TCG-only, we don't actually
need to be robust to bogus incoming migration data, and the effect of
it being wrong would be wrong code generation rather than a QEMU
crash; but if it did ever happen somehow it would be very difficult
to track down the cause. Add a check so that we fail the inbound
migration if the FPDSCR.LTPSIZE value is incorrect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-3-peter.maydell@linaro.org
Currently gen_jmp_tb() assumes that if it is called then the jump it
is handling is the only reason that we might be trying to end the TB,
so it will use goto_tb if it can. This is usually the case: mostly
"we did something that means we must end the TB" happens on a
non-branch instruction. However, there are cases where we decide
early in handling an instruction that we need to end the TB and
return to the main loop, and then the insn is a complex one that
involves gen_jmp_tb(). For instance, for M-profile FP instructions,
in gen_preserve_fp_state() which is called from vfp_access_check() we
want to force an exit to the main loop if lazy state preservation is
active and we are in icount mode.
Make gen_jmp_tb() look at the current value of is_jmp, and only use
goto_tb if the previous is_jmp was DISAS_NEXT or DISAS_TOO_MANY.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-2-peter.maydell@linaro.org
We can expose cycle counters on the PMU easily. To be as compatible as
possible, let's do so, but make sure we don't expose any other architectural
counters that we can not model yet.
This allows OSs to work that require PMU support.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-10-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have all logic in place that we need to handle Hypervisor.framework
on Apple Silicon systems, let's add CONFIG_HVF for aarch64 as well so that we
can build it.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> (x86 only)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210916155404.86958-9-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to handle PSCI calls. Most of the TCG code works for us,
but we can simplify it to only handle aa64 mode and we need to
handle SUSPEND differently.
This patch takes the TCG code as template and duplicates it in HVF.
To tell the guest that we support PSCI 0.2 now, update the check in
arm_cpu_initfn() as well.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-8-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have working system register sync, we push more target CPU
properties into the virtual machine. That might be useful in some
situations, but is not the typical case that users want.
So let's add a -cpu host option that allows them to explicitly pass all
CPU capabilities of their host CPU into the guest.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Acked-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-7-agraf@csgraf.de
[PMM: drop unnecessary #include line from .h file]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sleep on WFI until the VTIMER is due but allow ourselves to be woken
up on IPI.
In this implementation IPI is blocked on the CPU thread at startup and
pselect() is used to atomically unblock the signal and begin sleeping.
The signal is sent unconditionally so there's no need to worry about
races between actually sleeping and the "we think we're sleeping"
state. It may lead to an extra wakeup but that's better than missing
it entirely.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Acked-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210916155404.86958-6-agraf@csgraf.de
[agraf: Remove unused 'set' variable, always advance PC on WFX trap,
support vm stop / continue operations and cntv offsets]
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Acked-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With Apple Silicon available to the masses, it's a good time to add support
for driving its virtualization extensions from QEMU.
This patch adds all necessary architecture specific code to get basic VMs
working, including save/restore.
Known limitations:
- WFI handling is missing (follows in later patch)
- No watchpoint/breakpoint support
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-5-agraf@csgraf.de
[PMM: added missing #include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need PMC register definitions in accel specific code later.
Move all constant definitions to common arm headers so we can reuse
them.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-2-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move an ifndef CONFIG_USER_ONLY code block up in arm_cpu_reset() so
it can be merged with another earlier one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210914120725.24992-4-peter.maydell@linaro.org
There's no particular reason why the exclusive monitor should
be only cleared on reset in system emulation mode. It doesn't
hurt if it isn't cleared in user mode, but we might as well
reduce the amount of code we have that's inside an ifdef.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210914120725.24992-3-peter.maydell@linaro.org
Currently all of the M-profile specific code in arm_cpu_reset() is
inside a !defined(CONFIG_USER_ONLY) ifdef block. This is
unintentional: it happened because originally the only
M-profile-specific handling was the setup of the initial SP and PC
from the vector table, which is system-emulation only. But then we
added a lot of other M-profile setup to the same "if (ARM_FEATURE_M)"
code block without noticing that it was all inside a not-user-mode
ifdef. This has generally been harmless, but with the addition of
v8.1M low-overhead-loop support we ran into a problem: the reset of
FPSCR.LTPSIZE to 4 was only being done for system emulation mode, so
if a user-mode guest tried to execute the LE instruction it would
incorrectly take a UsageFault.
Adjust the ifdefs so only the really system-emulation specific parts
are covered. Because this means we now run some reset code that sets
up initial values in the FPCCR and similar FPU related registers,
explicitly set up the registers controlling FPU context handling in
user-emulation mode so that the FPU works by design and not by
chance.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/613
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210914120725.24992-2-peter.maydell@linaro.org
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-8-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
[rth: Split out of a larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is confusing to have different exits from translation
for various conditions in separate functions.
Merge disas_a64_insn into its only caller. Standardize
on the "s" name for the DisasContext, as the code from
disas_a64_insn had more instances.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210821195958.41312-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In v8A, the PSTATE.IL bit is set for various kinds of illegal
exception return or mode-change attempts. We already set PSTATE.IL
(or its AArch32 equivalent CPSR.IL) in all those cases, but we
weren't implementing the part of the behaviour where attempting to
execute an instruction with PSTATE.IL takes an immediate exception
with an appropriate syndrome value.
Add a new TB flags bit tracking PSTATE.IL/CPSR.IL, and generate code
to take an exception instead of whatever the instruction would have
been.
PSTATE.IL and CPSR.IL change only on exception entry, attempted
exception exit, and various AArch32 mode changes via cpsr_write().
These places generally already rebuild the hflags, so the only place
we need an extra rebuild_hflags call is in the illegal-return
codepath of the AArch64 exception_return helper.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210821195958.41312-2-richard.henderson@linaro.org
Message-Id: <20210817162118.24319-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[rth: Added missing returns; set IL bit in syndrome]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Included creation of ITS as part of virt platform GIC
initialization. This Emulated ITS model now co-exists with kvm
ITS and is enabled in absence of kvm irq kernel support in a
platform.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-9-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although we probe for the IPA limits imposed by KVM (and the hardware)
when computing the memory map, we still use the old style '0' when
creating a scratch VM in kvm_arm_create_scratch_host_vcpu().
On systems that are severely IPA challenged (such as the Apple M1),
this results in a failure as KVM cannot use the default 40bit that
'0' represents.
Instead, probe for the extension and use the reported IPA limit
if available.
Cc: Andrew Jones <drjones@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20210822144441.1290891-2-maz@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a definition for the Fujitsu A64FX processor.
The A64FX processor does not implement the AArch32 Execution state,
so there are no associated AArch32 Identification registers.
For SVE, the A64FX processor supports only 128,256 and 512bit vector
lengths.
The Identification register values are defined based on the FX700,
and have been tested and confirmed.
Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now have a complete MVE emulation, so we can enable it in our
Cortex-M55 model by setting the ID registers to match those of a
Cortex-M55 with full MVE support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VRINT insns, which round floating point inputs
to integer values, leaving them in floating point format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCVT instruction which converts between single
and half precision floating point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCVT which converts from floating-point to integer
using a rounding mode specified by the instruction. We implement
this similarly to the Neon equivalents, by passing the required
rounding mode as an extra integer parameter to the helper functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE "VCVT (between floating-point and integer)" insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCVT insns which convert between floating and fixed
point. As with the Neon equivalents, these use essentially the same
constant encoding as right-shift-by-immediate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE fp scalar comparisons VCMP and VPT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE fp vector comparisons VCMP and VPT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMAXNMV, VMINNMV, VMAXNMAV, VMINNMAV insns. These
calculate the maximum or minimum of floating point elements across a
vector, starting with a value in a general purpose register and
returning the result there.
The pseudocode silences a possible SNaN in the accumulating result
on every iteration (by calling FPConvertNaN), but we do it only
on the input ra, because if none of the inputs to float*_maxnum
or float*_minnum are SNaNs then the result can't be an SNaN.
Note that we can't use the float*_maxnuma() etc functions we defined
earlier for VMAXNMA and VMINNMA, because we mustn't take the absolute
value of the starting general-purpose register value, which could be
negative.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE fp-with-scalar VFMA and VFMAS insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE scalar floating point insns VADD, VSUB and VMUL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMAXNMA and VMINNMA insns; these are 2-operand, but
the destination register must be the same as one of the source
registers.
We defer the decode of the size in bit 28 to the individual insn
patterns rather than doing it in the format, because otherwise we
would have a single insn pattern that overlapped with two groups (eg
VMAXNMA with the VMULH_S and VMULH_U groups). Having two insn
patterns per insn seems clearer than a complex multilevel nesting
of overlapping and non-overlapping groups.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VCMUL and VCMLA insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VFMA and VFMS insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VCADD insn. Note that here the size bit is the
opposite sense to the other 2-operand fp insns.
We don't check for the sz == 1 && Qd == Qm UNPREDICTABLE case,
because that would mean we can't use the DO_2OP_FP macro in
translate-mve.c.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement more simple 2-operand floating point MVE insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VADD (floating-point) insn. Handling of this is
similar to the 2-operand integer insns, except that we must take care
to only update the floating point exception status if the least
significant bit of the predicate mask for each element is active.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we rely on all the callsites of cpsr_write() to rebuild the
cached hflags if they change one of the CPSR bits which we use as a
TB flag and cache in hflags. This is a bit awkward when we want to
change the set of CPSR bits that we cache, because it means we need
to re-audit all the cpsr_write() callsites to see which flags they
are writing and whether they now need to rebuild the hflags.
Switch instead to making cpsr_write() call arm_rebuild_hflags()
itself if one of the bits being changed is a cached bit.
We don't do the rebuild for the CPSRWriteRaw write type, because that
kind of write is generally doing something special anyway. For the
CPSRWriteRaw callsites in the KVM code and inbound migration we
definitely don't want to recalculate the hflags; the callsites in
boot.c and arm-powerctl.c have to do a rebuild-hflags call themselves
anyway because of other CPU state changes they make.
This allows us to drop explicit arm_rebuild_hflags() calls in a
couple of places where the only reason we needed to call it was the
CPSR write.
This fixes a bug where we were incorrectly failing to rebuild hflags
in the code path for a gdbstub write to CPSR, which meant that you
could make QEMU assert by breaking into a running guest, altering the
CPSR to change the value of, for example, CPSR.E, and then
continuing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210817201843.3829-1-peter.maydell@linaro.org
In v7A, the HSTR register has a TJDBX bit which traps NS EL0/EL1
access to the JOSCR and JMCR trivial Jazelle registers, and also BXJ.
Implement these traps. In v8A this HSTR bit doesn't exist, so don't
trap for v8A CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210816180305.20137-3-peter.maydell@linaro.org
In v7, the HSTR register has a TTEE bit which allows EL0/EL1 accesses
to the Thumb2EE TEECR and TEEHBR registers to be trapped to the
hypervisor. Implement these traps.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210816180305.20137-2-peter.maydell@linaro.org
KVM cannot support multiple address spaces per CPU; if you try to
create more than one then cpu_address_space_init() will assert.
In the Arm CPU realize function, detect the configurations which
would cause us to need more than one AS, and cleanly fail the
realize rather than blundering on into the assertion. This
turns this:
$ qemu-system-aarch64 -enable-kvm -display none -cpu max -machine raspi3b
qemu-system-aarch64: ../../softmmu/physmem.c:747: cpu_address_space_init: Assertion `asidx == 0 || !kvm_enabled()' failed.
Aborted
into:
$ qemu-system-aarch64 -enable-kvm -display none -machine raspi3b
qemu-system-aarch64: Cannot enable KVM when guest CPU has EL3 enabled
and this:
$ qemu-system-aarch64 -enable-kvm -display none -machine mps3-an524
qemu-system-aarch64: ../../softmmu/physmem.c:747: cpu_address_space_init: Assertion `asidx == 0 || !kvm_enabled()' failed.
Aborted
into:
$ qemu-system-aarch64 -enable-kvm -display none -machine mps3-an524
qemu-system-aarch64: Cannot enable KVM when using an M-profile guest CPU
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/528
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210816135842.25302-3-peter.maydell@linaro.org
Future CPU types may specify which vector lengths are supported.
We can apply nearly the same logic to validate those lengths
as we do for KVM's supported vector lengths. We merge the code
where we can, but unfortunately can't completely merge it because
KVM requires all vector lengths, power-of-two or not, smaller than
the maximum enabled length to also be enabled. The architecture
only requires all the power-of-two lengths, though, so TCG will
only enforce that.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have an ARMCPU member sve_vq_supported we no longer
need the local kvm_supported bitmap for KVM's supported vector
lengths.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bitmap_clear() only clears the given range. While the given
range should be sufficient in this case we might as well be
100% sure all bits are zeroed by using bitmap_zero().
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow CPUs that support SVE to specify which SVE vector lengths they
support by setting them in this bitmap. Currently only the 'max' and
'host' CPU types supports SVE and 'host' requires KVM which obtains
its supported bitmap from the host. So, we only need to initialize the
bitmap for 'max' with TCG. And, since 'max' should support all SVE
vector lengths we simply fill the bitmap. Future CPU types may have
less trivial maps though.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As per commit 5626f8c6d4 ("rcu: Add automatically released rcu_read_lock
variants"), RCU_READ_LOCK_GUARD() should be used instead of
rcu_read_{un}lock().
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210727235201.11491-1-someguy@effective-light.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unlike A-profile, for M-profile the UDIV and SDIV insns can be
configured to raise an exception on division by zero, using the CCR
DIV_0_TRP bit.
Implement support for setting this bit by making the helper functions
raise the appropriate exception.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730151636.17254-3-peter.maydell@linaro.org
We're about to make a code change to the sdiv and udiv helper
functions, so first fix their indentation and coding style.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730151636.17254-2-peter.maydell@linaro.org
Implement the MVE interleaving load/store functions VLD2, VLD4, VST2
and VST4. VLD2 loads 16 bytes of data from memory and writes to 2
consecutive Qregs; VLD4 loads 16 bytes of data from memory and writes
to 4 consecutive Qregs. The 'pattern' field in the encoding
determines the offset into memory which is accessed and also which
elements in the Qregs are written to. (The intention is that a
sequence of four consecutive VLD4 with different pattern values
performs a complete de-interleaving load of 64 bytes into all
elements of the 4 Qregs.) VST2 and VST4 do the same, but for stores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VLDR/VSTR insns which do scatter-gather using base
addresses from Qm plus or minus an immediate offset (possibly with
writeback). Note that writeback is not predicated but it does have
to honour ECI state, so we have to add an eci_mask check to the
VSTR_SG macros (the VLDR_SG macros already needed this to be able
to distinguish "skip beat" from "set predicated element to 0").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE gather-loads and scatter-stores which
form the address by adding a base value from a scalar
register to an offset in each element of a vector.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCTP insn, which sets the VPR.P0 predicate bits so
as to predicate any element at index Rn or greater is predicated. As
with VPNOT, this insn itself is predicable and subject to beatwise
execution.
The calculation of the mask is the same as is used to determine
ltpmask in mve_element_mask(), but we precalculate masklen in
generated code to avoid having to have 4 helpers specialized by size.
We put the decode line in with the low-overhead-loop insns in
t32.decode because it's logically part of that collection of insn
patterns, even though it is an MVE only insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VPNOT insn, which inverts the bits in VPR.P0
(subject to both predication and to beatwise execution).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMOV forms that move data between 2 general-purpose
registers and 2 32-bit lanes in a vector register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMAXA and VMINA insns, which take the absolute
value of the signed elements in the input vector and then accumulate
the unsigned max or min into the destination vector.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE 1-operand saturating operations VQABS and VQNEG.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE saturating doubling multiply accumulate insns
VQDMLAH, VQRDMLAH, VQDMLASH and VQRDMLASH. These perform a multiply,
double, add the accumulator shifted by the element size, possibly
round, saturate to twice the element size, then take the high half of
the result. The *MLAH insns do vector * scalar + vector, and the
*MLASH insns do vector * vector + scalar.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMLA insn, which multiplies a vector by a scalar
and accumulates into another vector.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMLADAV and VMLSLDAV insns. Like the VMLALDAV and
VMLSLDAV insns already implemented, these accumulate multiplied
vector elements; but they accumulate a 32-bit result rather than a
64-bit one.
Note that these encodings overlap with what would be RdaHi=0b111 for
VMLALDAV, VMLSLDAV, VRMLALDAVH and VRMLSLDAVH.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The MVEGenDualAccOpFn is a bit misnamed, since it is used for
the "long dual accumulate" operations that use a 64-bit
accumulator. Rename it to MVEGenLongDualAccOpFn so we can
use the former name for the 32-bit accumulator insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE narrowing move insns VMOVN, VQMOVN and VQMOVUN.
These take a double-width input, narrow it (possibly saturating) and
store the result to either the top or bottom half of the output
element.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VABAV insn, which computes absolute differences
between elements of two vectors and accumulates the result into
a general purpose register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE integer min/max across vector insns
VMAXV, VMINV, VMAXAV and VMINAV, which find the maximum
from the vector elements and a general purpose register,
and store the maximum back into the general purpose
register.
These insns overlap with VRMLALDAVH (they use what would
be RdaHi=0b110).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
All the users of the vmlaldav formats have an 'x bit in bit 12 and an
'a' bit in bit 5; move these to the format rather than specifying them
in each insn pattern.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE instructions which perform shifts by a scalar.
These are VSHL T2, VRSHL T2, VQSHL T1 and VQRSHL T2. They take the
shift amount in a general purpose register and shift every element in
the vector by that amount.
Mostly we can reuse the helper functions for shift-by-immediate; we
do need two new helpers for VQRSHL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMLAS insn, which multiplies a vector by a vector
and adds a scalar.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VPSEL insn, which sets each byte of the destination
vector Qd to the byte from either Qn or Qm depending on the value of
the corresponding bit in VPR.P0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE integer vector comparison instructions that compare
each element against a scalar from a general purpose register. These
are "VCMP (vector)" encodings T4, T5 and T6 and "VPT (vector)"
encodings T4, T5 and T6.
We have to move the decodetree pattern for VPST, because it
overlaps with VCMP T4 with size = 0b11.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE integer vector comparison instructions. These are
"VCMP (vector)" encodings T1, T2 and T3, and "VPT (vector)" encodings
T1, T2 and T3.
These insns compare corresponding elements in each vector, and update
the VPR.P0 predicate bits with the results of the comparison. VPT
also sets the VPR.MASK01 and VPR.MASK23 fields -- it is effectively
"VCMP then VPST".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Factor out the "generate code to update VPR.MASK01/MASK23" part of
trans_VPST(); we are going to want to reuse it for the VPT insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE incrementing/decrementing dup insns VIDUP, VDDUP,
VIWDUP and VDWDUP. These fill the elements of a vector with
successively incrementing values, starting at the offset specified in
a general purpose register. The final value of the offset is written
back to this register. The wrapping variants take a second general
purpose register which specifies the point where the count should
wrap back to 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMULL (polynomial) insn. Unlike Neon, this comes
in two flavours: 8x8->16 and a 16x16->32. Also unlike Neon, the
inputs are in either the low or the high half of each double-width
element.
The assembler for this insn indicates the size with "P8" or "P16",
encoded into bit 28 as size = 0 or 1. We choose to follow the
same encoding as VQDMULL and decode this into a->size as MO_16
or MO_32 indicating the size of the result elements. This then
carries through to the helper function names where it then
matches up with the existing pmull_h() which does an 8x8->16
operation and a new pmull_w() which does the 16x16->32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For vector loads, predicated elements are zeroed, instead of
retaining their previous values (as happens for most data
processing operations). This means we need to distinguish
"beat not executed due to ECI" (don't touch destination
element) from "beat executed but predicated out" (zero
destination element).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We were not paying attention to the ECI state when advancing the VPT
state. Architecturally, VPT state advance happens for every beat
(see the pseudocode VPTAdvance()), so on every beat the 4 bits of
VPR.P0 corresponding to the current beat are inverted if required,
and at the end of beats 1 and 3 the VPR MASK fields are updated.
This means that if the ECI state says we should not be executing all
4 beats then we need to skip some of the updating of the VPR that we
currently do in mve_advance_vpt().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In some situations we need a mask telling us which parts of the
vector correspond to beats that are not being executed because of
ECI, separately from the combined "which bytes are predicated away"
mask. Factor this mask calculation out of mve_element_mask() into
its own function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In mve_element_mask(), we calculate a mask for tail predication which
should have a number of 1 bits based on the value of LR. However,
our MAKE_64BIT_MASK() macro has undefined behaviour when passed a
zero length. Special case this to give the all-zeroes mask we
require.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We got an edge case wrong in the 48-bit SQRSHRL implementation: if
the shift is to the right, although it always makes the result
smaller than the input value it might not be within the 48-bit range
the result is supposed to be if the input had some bits in [63..48]
set and the shift didn't bring all of those within the [47..0] range.
Handle this similarly to the way we already do for this case in
do_uqrshl48_d(): extend the calculated result from 48 bits,
and return that if not saturating or if it doesn't change the
result; otherwise fall through to return a saturated value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In do_sqrshl48_d() and do_uqrshl48_d() we got some of the edge
cases wrong and failed to saturate correctly:
(1) In do_sqrshl48_d() we used the same code that do_shrshl_bhs()
does to obtain the saturated most-negative and most-positive 48-bit
signed values for the large-shift-left case. This gives (1 << 47)
for saturate-to-most-negative, but we weren't sign-extending this
value to the 64-bit output as the pseudocode requires.
(2) For left shifts by less than 48, we copied the "8/16 bit" code
from do_sqrshl_bhs() and do_uqrshl_bhs(). This doesn't do the right
thing because it assumes the C type we're working with is at least
twice the number of bits we're saturating to (so that a shift left by
bits-1 can't shift anything off the top of the value). This isn't
true for bits == 48, so we would incorrectly return 0 rather than the
most-positive value for situations like "shift (1 << 44) right by
20". Instead check for saturation by doing the shift and signextend
and then testing whether shifting back left again gives the original
value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In the MVE helpers for the narrowing operations (DO_VSHRN and
DO_VSHRN_SAT) we were using the wrong bits of the predicate mask for
the 'top' versions of the insn. This is because the loop works over
the double-sized input elements and shifts the predicate mask by that
many bits each time, but when we write out the half-sized output we
must look at the mask bits for whichever half of the element we are
writing to.
Correct this by shifting the whole mask right by ESIZE bits for the
'top' insns. This allows us also to simplify the saturation bit
checking (where we had noticed that we needed to look at a different
mask bit for the 'top' insn.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
A cut-and-paste error meant we handled signed VADDV like
unsigned VADDV; fix the type used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In the MVE shift-and-insert insns, we special case VSLI by 0
and VSRI by <dt>. VSRI by <dt> means "don't update the destination",
which is what we've implemented. However VSLI by 0 is "set
destination to the input", so we don't want to use the same
special-casing that we do for VSRI by <dt>.
Since the generic logic gives the right answer for a shift
by 0, just use that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Include the MVE VPR register value in the CPU dumps produced by
arm_cpu_dump_state() if we are printing FPU information. This
makes it easier to interpret debug logs when predication is
active.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Although the architecture doesn't define it as an alias, VMOVL
(vector move long) is encoded as a VSHLL with a zero shift.
Add a comment in the decode file noting that we handle VMOVL
as part of VSHLL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Mirror the behavour of /proc/sys/abi/sve_default_vector_length
under the real linux kernel. We have no way of passing along
a real default across exec like the kernel can, but this is a
decent way of adjusting the startup vector length of a process.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/482
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723203344.968563-4-richard.henderson@linaro.org
[PMM: tweaked docs formatting, document -1 special-case,
added fixup patch from RTH mentioning QEMU's maximum veclen.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename from sve_zcr_get_valid_len and make accessible
from outside of helper.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723203344.968563-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, our only caller is sve_zcr_len_for_el, which has
already masked the length extracted from ZCR_ELx, so the
masking done here is a nop. But we will shortly have uses
from other locations, where the length will be unmasked.
Saturate the length to ARM_MAX_VQ instead of truncating to
the low 4 bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723203344.968563-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For M-profile, we weren't reporting alignment faults triggered by the
generic TCG code correctly to the guest. These get passed into
arm_v7m_cpu_do_interrupt() as an EXCP_DATA_ABORT with an A-profile
style exception.fsr value of 1. We didn't check for this, and so
they fell through into the default of "assume this is an MPU fault"
and were reported to the guest as a data access violation MPU fault.
Report these alignment faults as UsageFaults which set the UNALIGNED
bit in the UFSR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-4-peter.maydell@linaro.org
In do_v7m_exception_exit(), we perform various checks as part of
performing the exception return. If one of these checks fails, the
architecture requires that we take an appropriate exception on the
existing stackframe. We implement this by calling
v7m_exception_taken() to set up to take the new exception, and then
immediately returning from do_v7m_exception_exit() without proceeding
any further with the unstack-and-exception-return process.
In a couple of checks that are new in v8.1M, we forgot the "return"
statement, with the effect that if bad code in the guest tripped over
these checks we would set up to take a UsageFault exception but then
blunder on trying to also unstack and return from the original
exception, with the probable result that the guest would crash.
Add the missing return statements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-3-peter.maydell@linaro.org
For M-profile, unlike A-profile, the low 2 bits of SP are defined to be
RES0H, which is to say that they must be hardwired to zero so that
guest attempts to write non-zero values to them are ignored.
Implement this behaviour by masking out the low bits:
* for writes to r13 by the gdbstub
* for writes to any of the various flavours of SP via MSR
* for writes to r13 via store_reg() in generated code
Note that all the direct uses of cpu_R[] in translate.c are in places
where the register is definitely not r13 (usually because that has
been checked for as an UNDEFINED or UNPREDICTABLE case and handled as
UNDEF).
All the other writes to regs[13] in C code are either:
* A-profile only code
* writes of values we can guarantee to be aligned, such as
- writes of previous-SP-value plus or minus a 4-aligned constant
- writes of the value in an SP limit register (which we already
enforce to be aligned)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-2-peter.maydell@linaro.org
The hook is now unused, with breakpoints checked outside translation.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reuse the code at the bottom of helper_check_breakpoints,
which is what we currently call from *_tr_breakpoint_check.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always provide the atomic interface using TCGMemOpIdx oi
and uintptr_t retaddr. Rename from helper_* to cpu_* so
as to (mostly) match the exec/cpu_ldst.h functions, and
to emphasize that they are not callable from TCG directly.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Neon and SVE decoders use private 'plus1' functions to implement
"add one" for the !function decoder syntax. We have a generic
"plus_1" function in translate.h, so use that instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210715095341.701-1-peter.maydell@linaro.org
The functions vmsa_ttbcr_write and vmsa_ttbcr_raw_write expect
the offset to be for the complete TCR structure, not the offset
to the low 32-bits of a uint64_t. Using offsetoflow32 in this
case breaks big-endian hosts.
For TTBCR2, we do want the high 32-bits of a uint64_t.
Use cp15.tcr_el[*].raw_tcr as the offsetofhigh32 argument to
clarify this.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/187
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210709230621.938821-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have not needed to end a TB for I/O since ba3e792669
("icount: clean up cpu_can_io at the entry to the block"),
and gdbstub singlestep is handled by the generic function.
Drop the unused 'n' argument to use_goto_tb.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using gen_goto_tb directly misses the single-step check.
Let the branch or debug exception be emitted by arm_tr_tb_stop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The root trace-events only declares a single TCG event:
$ git grep -w tcg trace-events
trace-events:115:# tcg/tcg-op.c
trace-events:137:vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
and only a tcg/tcg-op.c uses it:
$ git grep -l trace_guest_mem_before_tcg
tcg/tcg-op.c
therefore it is pointless to include "trace-tcg.h" in each target
(because it is not used). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210629050935.2570721-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a target-specific Kconfig. We need the definitions in Kconfig so
the minikconf tool can verify they exits. However CONFIG_FOO is only
enabled for target foo via the meson.build rules.
Two architecture have a particularity, ARM and MIPS. As their
translators have been split you can potentially build a plain 32 bit
build along with a 64-bit version including the 32-bit subset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210131111316.232778-6-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nick Hudson <hnick@vmware.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE shifts by register, which perform
shifts on a single general-purpose register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-19-peter.maydell@linaro.org
Implement the MVE shifts by immediate, which perform shifts
on a single general-purpose register.
These patterns overlap with the long-shift-by-immediates,
so we have to rearrange the grouping a little here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-18-peter.maydell@linaro.org
Implement the MVE long shifts by register, which perform shifts on a
pair of general-purpose registers treated as a 64-bit quantity, with
the shift count in another general-purpose register, which might be
either positive or negative.
Like the long-shifts-by-immediate, these encodings sit in the space
that was previously the UNPREDICTABLE MOVS/ORRS with Rm==13,15.
Because LSLL_rr and ASRL_rr overlap with both MOV_rxri/ORR_rrri and
also with CSEL (as one of the previously-UNPREDICTABLE Rm==13 cases),
we have to move the CSEL pattern into the same decodetree group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-17-peter.maydell@linaro.org
The MVE extension to v8.1M includes some new shift instructions which
sit entirely within the non-coprocessor part of the encoding space
and which operate only on general-purpose registers. They take up
the space which was previously UNPREDICTABLE MOVS and ORRS encodings
with Rm == 13 or 15.
Implement the long shifts by immediate, which perform shifts on a
pair of general-purpose registers treated as a 64-bit quantity, with
an immediate shift count between 1 and 32.
Awkwardly, because the MOVS and ORRS trans functions do not UNDEF for
the Rm==13,15 case, we need to explicitly emit code to UNDEF for the
cases where v8.1M now requires that. (Trying to change MOVS and ORRS
is too difficult, because the functions that generate the code are
shared between a dozen different kinds of arithmetic or logical
instruction for all A32, T16 and T32 encodings, and for some insns
and some encodings Rm==13,15 are valid.)
We make the helper functions we need for UQSHLL and SQSHLL take
a 32-bit value which the helper casts to int8_t because we'll need
these helpers also for the shift-by-register insns, where the shift
count might be < 0 or > 32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-16-peter.maydell@linaro.org
Implement the MVE VADDLV insn; this is similar to VADDV, except
that it accumulates 32-bit elements into a 64-bit accumulator
stored in a pair of general-purpose registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-15-peter.maydell@linaro.org
Implement the MVE VSHLC insn, which performs a shift left of the
entire vector with carry in bits provided from a general purpose
register and carry out bits written back to that register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-14-peter.maydell@linaro.org
Implement the MVE saturating shift-right-and-narrow insns
VQSHRN, VQSHRUN, VQRSHRN and VQRSHRUN.
do_srshr() is borrowed from sve_helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-13-peter.maydell@linaro.org
Implement the MVE shift-right-and-narrow insn VSHRN and VRSHRN.
do_urshr() is borrowed from sve_helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-12-peter.maydell@linaro.org
Implement the MVE VSRI and VSLI insns, which perform a
shift-and-insert operation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-11-peter.maydell@linaro.org
Implement the MVE VHLL (vector shift left long) insn. This has two
encodings: the T1 encoding is the usual shift-by-immediate format,
and the T2 encoding is a special case where the shift count is always
equal to the element size.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-10-peter.maydell@linaro.org
Implement the MVE vector shift right by immediate insns VSHRI and
VRSHRI. As with Neon, we implement these by using helper functions
which perform left shifts but allow negative shift counts to indicate
right shifts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-9-peter.maydell@linaro.org
Implement the MVE shift-vector-left-by-immediate insns VSHL, VQSHL
and VQSHLU.
The size-and-immediate encoding here is the same as Neon, and we
handle it the same way neon-dp.decode does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-8-peter.maydell@linaro.org
Implement the MVE logical-immediate insns (VMOV, VMVN,
VORR and VBIC). These have essentially the same encoding
as their Neon equivalents, and we implement the decode
in the same way.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-7-peter.maydell@linaro.org
Use dup_const() instead of bitfield_replicate() in
disas_simd_mod_imm().
(We can't replace the other use of bitfield_replicate() in this file,
in logic_imm_decode_wmask(), because that location needs to handle 2
and 4 bit elements, which dup_const() cannot.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-6-peter.maydell@linaro.org
The A64 AdvSIMD modified-immediate grouping uses almost the same
constant encoding that A32 Neon does; reuse asimd_imm_const() (to
which we add the AArch64-specific case for cmode 15 op 1) instead of
reimplementing it all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-5-peter.maydell@linaro.org
The function asimd_imm_const() in translate-neon.c is an
implementation of the pseudocode AdvSIMDExpandImm(), which we will
also want for MVE. Move the implementation to translate.c, with a
prototype in translate.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-4-peter.maydell@linaro.org
