- Added version check and reinstall page based on NSIS example.
- Since the registry keys changed with each Bochs version, it is not possible
to detect all of them. Added special code to make this possible for previous
version 2.6.9.
- Updated tested NSIS version number in docs.
- Added welcome and finish page.
- Now using Bochs logo from website as installer bitmap.
- Temporarily added top of 2.6.9 CHANGES file at the bottom of the README.
Now showing one file after successful installation is enough.
TODO: update before release!
- The Desktop icon for the DLX Linux demo is now optional.
- Removed obsolete PIF entries.
- Started preparing the script for version detection.
- Script tested with NSIS 3.04.
- Get rid of VER_STRING since it's the same as VERSION
- Add new defines VER_MAJOR, VER_MINOR, VER_PATCH and VER_SVN and use them for
the version number on Windows.
- TODO: Add the capability to detect installed version to the Windows installer.
- if wxGTK uses GTK 3.x, also use it for the gui debugger to avoid trouble
- the name of the include file for GDK keysyms now depends on GDK version, so
the temporary translation table can be removed
- small fix to compile the gui debugger with GTK 3.x (warnings still exist)
- configure script now supports wxGTK 3.1 (using GTK 3.0).
- added workaround for GDK keysym name change.
- define deprecated WXWIN symbol wxADJUST_MINSIZE for compatibility.
- compilation fix for Linux in the slirp code.
Voodoo3 AGP driver I have tested are not using this feature, we don't have a
test case yet to implement it correctly. The GART is used by AGP and the newer
PCIe bus and the specs say that the format is defined by software (driver).
the square wave generator disabled. This feature has been used by old demos and
games to play digitized sound before soundcards with DSP became popular.
- rombios.c: return maximum bus number #1 for i440BX.
- Now using different i/o and memory base address regions for PCI and AGP.
- Added some init code for the i440BX PCI/AGP bridge.
- Some code cleanups.
- rombios.c: return maximum bus number #1 for i440BX.
- Now using different i/o and memory base address regions for PCI and AGP.
- Added some init code for the i440BX PCI/AGP bridge.
- Some code cleanups.
- Bochs BIOS: Improved calculating PCI slot number from device number to handle
the i440BX case correctly.
- Memory code: Detect and modify the PCI IRQ roouting table of the Bochs BIOS
for the i440BX chipset (TODO: this could be done by the BIOS itself after
copying to shadow RAM).
- Bochs BIOS: Improved calculating PCI slot number from device number to handle
the i440BX case correctly.
- Memory code: Detect and modify the PCI IRQ roouting table of the Bochs BIOS
for the i440BX chipset (TODO: this could be done by the BIOS itself after
copying to shadow RAM).
- Added symbols for the i440BX host bridge device ID.
- Probe and search for devices on PCI bus #1 (AGP).
- Set up memory and i/o regions only for header type 0.
- Set AGP aperture size to 64 MB.
- TODO: PCI IRQ routing, i440BX specific register setup.
- Added symbols for the i440BX host bridge device ID.
- Probe and search for devices on PCI bus #1 (AGP).
- Set up memory and i/o regions only for header type 0.
- Set AGP aperture size to 64 MB.
- TODO: PCI IRQ routing, i440BX specific register setup.
- Function ata_cmd_data_io: using fixed block size 512 only for 'identify'
commands. For read/write commands the hard disk sector size must be used.
- Take account of sector size when calculating hard disk size in MBytes (TODO:
calculation is not correct for not yet existing very big disks).
- updated comment.
- Function ata_cmd_data_io: using fixed block size 512 only for 'identify'
commands. For read/write commands the hard disk sector size must be used.
- Take account of sector size when calculating hard disk size in MBytes (TODO:
calculation is not correct for not yet existing very big disks).
- updated comment.
- Added default value for the video clock frequency to make sure that the
vertical timer works.
- Changing vidDesktopStartAddr register when the video processor is on now
forces a screen update.
- Implemented sector size handling in the ATA disk emulation. This feature
still needs BIOS support to boot from a disk with big sectors.
- Enabled sector size support in the redolog_t class based disk image mode.
The base class can handle 512 byte blocks only, but that doesn't matter since
all valid sector sizes are multiple of it. So for now the growing, undoable
and volatile disk image modes internally read/write 512 bytes per call.
- TODO: BIOS, bximage.
be specified as a USB port option (e.g. 'sect_size:1024'). The values 512, 1024
and 4096 are supported. If not specified, it defaults to 512.
TODO: ATA disk (harddrv code), BIOS, bximage.
- 'flat' mode: disk image size must be multiple of sector size.
- 'concat' mode: each disk image size and lseek() offset must be multiple of
sector size.
- 'sparse' mode: page size and lseek() offset must be multiple of sector size.
- TODO: 'growing', 'undoable' and 'volatile' mode: redolog_t class is still
based on 512-byte blocks.
- TODO: 'vbox', 'vmware3', 'vmware4', 'vpc' and 'vvfat' mode have a builtin
geometry. If other sector sizes are supported, it should be handled correctly.
- harddrv code now reports current sector size, but still panics for now.
- TODO: harrdrv and USB disk code, bximage, BIOS.
This code is based on the initial patch by Ben Lunt with some modifications:
using enum parameter, extra parser handler and cdrom handling not necessary,
TODO: hdimage and bximage code, harddrv and USB disk emulation, BIOS.
- Fixed PCI BAR initialization (now using memset()).
- Fixed reset failure (set all PAM memory types to ROM).
- Added stub for the AGP aperture (register BAR #0, handle APSIZE and read
GART entry in read/write handlers).
- Added some more PCI register defaults and write masks.
- Fixed a warning in the ES1370 code.
- Voodoo Banshee: set up PCI subsystem ID depending on bus and model.
- Volatile BIOS write support must also be present in ISA BIOS memory.
- Added new PCI chipset choice for the i440BX AGPset. Some basic work is done,
but AGP support is not present yet.
- Added new class for the "virtual" PCI-to-PCI bridge that should manage the
secondary bus (AGP). Since this device must appear with device number #1 at
the primary bus, it was required to change the PCI device numbers for the
i440BX case. Moved the PIIX4 module to device number #7. The presence of the
PCI base address regions now depends on the header type as expected.
- Since the Bochs BIOS cannot handle the modified PCI device layout, all tests
continued with an external BIOS designed for this chipset (GA-6BA_F1.bin).
This BIOS requires additional changes in some devices.
- ACPI: Return value 0 for some status registers and the GPI registers.
- CMOS: Since the PIIX4 supports a 256 byte CMOS RAM, prepared support for it
and enable it in case a 256 byte CMOS image is used.
- PCI: The device numbers for 4 slots starting at #8. The 5th slot could be
used for AGP when available.
Using a temporary subsystem ID, since I haven't found a VGABIOS ROM image for
the PCI version and Bochs doesn't support AGP yet. After modifying Voodoo3.inf
the driver could be installed successfully in Win95/98 and the Voodoo3 works as
expected (same issues as the Banshee model).
Removed BX_ERROR message about setting undocumented srcXY register bits. They
seem to have no effect on the emulation and could be ignored.
- Screen-to-screen blt: added support for expanding monochrome source data.
- Fixed calculation of the pitch for packed source data.
- Fixed repeated execution of some commands in non-immediate mode.
- PCI devices: fixed and improved BX_INFO / BX_DEBUG messages.
- Added INT pin init to method init_pci_conf().
- Moved readonly register handling to the common PCI write handler.
- Moved IRQ line reporting to the common PCI write handler.
- Added new structure bx_pci_bar_t that contains all parameters related to the
PCI BARs (type, size, address and r/w handlers).
- Added new methods init_bar_io() and init_bar_mem() to set up the new structure
in the pci device init code.
- Added new method pci_write_handler_common() to handle writes to the normal
BARs and the ROM BAR. Writes to other registers are forwarded to the device
specific PCI write handlers. Removed BAR and ROM BAR handling from the
specific code.
- Added new method pci_bar_change_notify() to execute specific code after BAR
update (vga, ne2k).
- Moved normal BAR handling to method after_restore_pci_state().
- Store pointer to PCI device name in bx_pci_device_c and use it for i/o setup.
- Added support for stippled lines.
- Fixed return values of the I2C interface with no VMI/decoder connected.
- Added some comments about current status of the Banshee code.
take RAW_BYTES string out of bx_param_string_c into new param type bx_param_bytestring_c (better name, anybody?)
this is intermediate step, later it would be better to merge bx_param_string into generic template bx_param<type>
but bx_param_bytestring_cis not matching that concept (or probably will continue to inherit from bx_param<string>)
- Basic I2C implementation for DDC2B support.
- Added VESA EDID structure (values from a patch for the LGPL'd VGABIOS).
- Windows now detecting plug&play monitor "Bochs Screen" if an original VGABIOS
image is used (Cirrus PCI / Voodoo Banshee).
- TODO: Add this feature in the Cirrus version of the LGPL'd VGABIOS.
use new method do dump param tree during save/restore, GUI and text debugger and other places
significantly reduce code duplication over multiple modules
the method dumps param to the FILE
use new method do dump param tree during save/restore
also make more use of parse_param methods which initialize param from a string
- Happy new year!
- Improved pixel format conversion in host-to-screen operations.
- Rewrite of the linear framebuffer read/write code fixes icons in 16 bpp mode.
- Don't flood log file when polling the 2D status register (similar to 3D one).
- FIXME list:
- Minor issues in all Banshee modes (e.g. forward/back buttons in explorer).
- Display errors in 16 bpp mode after leaving 3D mode.
- Display errors in 16 bpp mode in case debug messages are turned on (timing).
- Voodoo2 3D demo "donut" still fails.
- Bochs crashes on Windows host (MSVC in some cases, MSYS2 64-bit build also
reported, but not yet reproduced.
- TODO list:
- Remaining 2D stuff: polygon fill, stretching functions.
- Move Banshee stuff to separate files.
- Add Voodoo3 support (it's an improved Banshee card).
- Simplified register writes from CMDFIFO using new methods in the new classes.
- Started work on reset() and continued work on save/restore support.
- Mention the Banshee model in the Bochs documentation.
bx_voodoo_base_c that contains the shared code and the new classes
bx_voodoo_1_2_c and bx_banshee_c with the specific implementations. There are
not functional changes yet. TODO: The Banshee specific stuff could be moved to
separate files, but should still remain in the same plugin as Voodoo 1/2.
- Fixed alignment for unpacked monochrome source data in case the calculated
required amount of data for one row is more than the given source pitch.
In even rows the leftmost pixel comes from the LSB bit #7 as expected.
In odd rows the whole row is aligned to the next dword boundary (the rightmost
pixel comes from the MSB bit #0). This alternating alignment is not documented,
but fixes some bitmaps (e.g. Win95 login / logout dialogs).
- Fixed calculation of host-to-screen data size for the pixel alignment > 0 and
color depth > 8.
- Added minimal support for pixel format conversion (32/24 to 16).
- Also set the "Banshee busy" flag if one of the CMDFIFOs is busy.
- Fixed CMDFIFO error message condition.
- Tiled source pitch is only used for screen-to-screen operations.
- Use the CMDFIFO wakeup on vertical retrace only for the 3D mode.
- Report screen mode change (2D, 3D, mixed).
- Added BX_ERRORs for currently unsupported pixel format conversion.
- Only continue bitblt operation if width and height is > 0 after clipping.
- Temporary hack: Processing CMDFIFO packets directly after completion fixes
some display issues (FIXME: 3D mode should work like Voodoo2).
- Handling variable 'gui_update_pending' like Voodoo 1/2 fixes 3D display
flicker. Simplified first stage of the update() code. Some 3D display issues
still need to be investigated.
- Added missing 16-bit write support in 3D memory space.
- Added separate method for linear FB writes und use it for CMDFIFO packet type
5, destination code 0. Added minimal "byte disable" support in this code.
- Added Banshee specific registers in register_w() since they use the same
addresses as the Voodoo2 CMDFIFO config registers in register_w_common().
Now the fullscreen 3D mode is basicly working. The display flickers sometimes
and the desktop is possibly unusable after leaving 3D mode. This may be
caused by the still incorrect CMDFIFO implementation.
- Split the host-to-screen method in two ones: one for the pattern case (ternary
ROPs) and one optimized for the standard case (binary ROPs).
- Improved the foreground/background color handling for bitblt operations.
