sideleg and sedeleg csrs are not part of riscv isa spec
anymore, these csrs were part of N extension which
is removed from the riscv isa specification.
These commits removed all traces of these csrs from
riscv spec (https://github.com/riscv/riscv-isa-manual) -
commit f8d27f805b65 ("Remove or downgrade more references to N extension (#674)")
commit b6cade07034d ("Remove N extension chapter for now")
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220824145255.400040-1-rpathak@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The riscv target incorrectly enabled semihosting always, whether the
user asked for it or not. Call semihosting_enabled() passing the
correct value to the is_userspace argument, which fixes this and also
handles the userspace=on argument. Because we do this at translate
time, we no longer need to check the privilege level in
riscv_cpu_do_interrupt().
Note that this is a behaviour change: we used to default to
semihosting being enabled, and now the user must pass
"-semihosting-config enable=on" if they want it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220822141230.3658237-8-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The sscofpmf extension was ratified as a part of priv spec v1.12.
Mark the csr_ops accordingly.
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-6-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Qemu virt machine can support few cache events and cycle/instret counters.
It also supports counter overflow for these events.
Add a DT node so that OpenSBI/Linux kernel is aware of the virt machine
capabilities. There are some dummy nodes added for testing as well.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-5-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Qemu can monitor the following cache related PMU events through
tlb_fill functions.
1. DTLB load/store miss
3. ITLB prefetch miss
Increment the PMU counter in tlb_fill function.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-4-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All the hpmcounters and the fixed counters (CY, IR, TM) can be represented
as a unified counter. Thus, the predicate function doesn't need handle each
case separately.
Simplify the predicate function so that we just handle things differently
between RV32/RV64 and S/HS mode.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-3-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Sscofpmf ('Ss' for Privileged arch and Supervisor-level extensions,
and 'cofpmf' for Count OverFlow and Privilege Mode Filtering)
extension allows the perf to handle overflow interrupts and filtering
support. This patch provides a framework for programmable
counters to leverage the extension. As the extension doesn't have any
provision for the overflow bit for fixed counters, the fixed events
can also be monitoring using programmable counters. The underlying
counters for cycle and instruction counters are always running. Thus,
a separate timer device is programmed to handle the overflow.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vstimecmp CSR allows the guest OS or to program the next guest timer
interrupt directly. Thus, hypervisor no longer need to inject the
timer interrupt to the guest if vstimecmp is used. This was ratified
as a part of the Sstc extension.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221357.41070-4-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
stimecmp allows the supervisor mode to update stimecmp CSR directly
to program the next timer interrupt. This CSR is part of the Sstc
extension which was ratified recently.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221357.41070-3-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Historically, The mtime/mtimecmp has been part of the CPU because
they are per hart entities. However, they actually belong to aclint
which is a MMIO device.
Move them to the ACLINT device. This also emulates the real hardware
more closely.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221357.41070-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The arch review of AIA spec is completed and we now have official
extension names for AIA: Smaia (M-mode AIA CSRs) and Ssaia (S-mode
AIA CSRs).
Refer, section 1.6 of the latest AIA v0.3.1 stable specification at
https://github.com/riscv/riscv-aia/releases/download/0.3.1-draft.32/riscv-interrupts-032.pdf)
Based on above, we update QEMU RISC-V to:
1) Have separate config options for Smaia and Ssaia extensions
which replace RISCV_FEATURE_AIA in CPU features
2) Not generate AIA INTC compatible string in virt machine
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220820042958.377018-1-apatel@ventanamicro.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
XVentanaCondOps is Ventana custom extension. Add
its extension entry in the ISA Ext array
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220816045408.1231135-1-rpathak@ventanamicro.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Normally, riscv_csrrw_check is called when executing Zicsr instructions.
And we can only do access control for existed CSRs. So the priority of
CSR related check, from highest to lowest, should be as follows:
1) check whether Zicsr is supported: raise RISCV_EXCP_ILLEGAL_INST if not
2) check whether csr is existed: raise RISCV_EXCP_ILLEGAL_INST if not
3) do access control: raise RISCV_EXCP_ILLEGAL_INST or RISCV_EXCP_VIRT_
INSTRUCTION_FAULT if not allowed
The predicates contain parts of function of both 2) and 3), So they need
to be placed in the middle of riscv_csrrw_check
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220803123652.3700-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added support for RISC-V PAUSE instruction from Zihintpause extension,
enabled by default.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Dao Lu <daolu@rivosinc.com>
Message-Id: <20220725034728.2620750-2-daolu@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to v-spec, mask agnostic behavior can be either kept as
undisturbed or set elements' bits to all 1s. To distinguish the
difference of mask policies, QEMU should be able to simulate the mask
agnostic behavior as "set mask elements' bits to all 1s".
There are multiple possibility for agnostic elements according to
v-spec. The main intent of this patch-set tries to add option that
can distinguish between mask policies. Setting agnostic elements to
all 1s allows QEMU to express this.
This commit adds option 'rvv_ma_all_1s' is added to enable the
behavior, it is default as disabled.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165570784143.17634.35095816584573691-10@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to v-spec, mask agnostic behavior can be either kept as
undisturbed or set elements' bits to all 1s. To distinguish the
difference of mask policies, QEMU should be able to simulate the mask
agnostic behavior as "set mask elements' bits to all 1s".
There are multiple possibility for agnostic elements according to
v-spec. The main intent of this patch-set tries to add option that
can distinguish between mask policies. Setting agnostic elements to
all 1s allows QEMU to express this.
This is the first commit regarding the optional mask agnostic
behavior. Follow-up commits will add this optional behavior
for all rvv instructions.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165570784143.17634.35095816584573691-1@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Just add 1 to the effective privledge level when in HS mode, then reuse
the check of 'effective_priv < csr_priv' in riscv_csrrw_check to replace
the privilege level related check in hmode. Then, hmode will only check
whether H extension is supported.
When accessing Hypervior CSRs:
1) If accessing from M privilege level, the check of
'effective_priv< csr_priv' passes, returns hmode(...) which will return
RISCV_EXCP_ILLEGAL_INST when H extension is not supported and return
RISCV_EXCP_NONE otherwise.
2) If accessing from HS privilege level, effective_priv will add 1,
the check passes and also returns hmode(...) too.
3) If accessing from VS/VU privilege level, the check fails, and
returns RISCV_EXCP_VIRT_INSTRUCTION_FAULT
4) If accessing from U privilege level, the check fails, and returns
RISCV_EXCP_ILLEGAL_INST
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add check for the implicit dependence between H and S
Csrs only existed in RV32 will not trigger virtual instruction fault
when not in RV32 based on section 8.6.1 of riscv-privileged spec
(draft-20220717)
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220718130955.11899-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add umode/umode32 predicate for mcounteren, menvcfg/menvcfgh
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix the lines with over 80 characters
Fix the lines which are obviously misalgined with other lines in the
same group
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add check for "H depends on an I base integer ISA with 32 x registers"
which is stated at the beginning of chapter 8 of the riscv-privileged
spec(draft-20220717)
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are 3 suggested privilege mode combinations listed in section 1.2
of the riscv-privileged spec(draft-20220717):
1) M, 2) M, U 3) M, S, U
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- Zmmul is ratified and is now version 1.0
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220710101546.3907-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For rv128c shifts, a shamt of 0 is a shamt of 64, while for rv32c/rv64c
it stays 0 and is a hint instruction that does not change processor state.
For rv128c right shifts, the 6-bit shamt is in addition sign extended to
7 bits.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220710110451.245567-1-frederic.petrot@univ-grenoble-alpes.fr>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should disable extensions in riscv_cpu_realize() if minimum required
priv spec version is not satisfied. This also ensures that machines with
priv spec v1.11 (or lower) cannot enable H, V, and various multi-letter
extensions.
Fixes: a775398be2 ("target/riscv: Add isa extenstion strings to the device tree")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Message-Id: <20220630061150.905174-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should write transformed instruction encoding of the trapped
instruction in [m|h]tinst CSR at time of taking trap as defined
by the RISC-V privileged specification v1.12.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: dramforever <dramforever@live.com>
Message-Id: <20220630061150.905174-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Right now the translator stops right *after* the end of a page, which
breaks reporting of fault locations when the last instruction of a
multi-insn translation block crosses a page boundary.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1155
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These will be useful in properly ending the TB.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We got to talking about how Zmmul and M interact with each other
https://github.com/riscv/riscv-isa-manual/issues/869 , and it turns out
that QEMU's behavior is slightly wrong: having Zmmul and M is a legal
combination, it just means that the multiplication instructions are
supported even when M is disabled at runtime via misa.
This just stops overriding M from Zmmul, with that the other checks for
the multiplication instructions work as per the ISA.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220714180033.22385-1-palmer@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The latest AIA draft v0.3.0 defines a relatively simpler scheme for
default priority assignments where:
1) local interrupts 24 to 31 and 48 to 63 are reserved for custom use
and have implementation specific default priority.
2) remaining local interrupts 0 to 23 and 32 to 47 have a recommended
(not mandatory) priority assignments.
We update the default priority table and hviprio mapping as-per above.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220616031543.953776-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Based on architecture review committee feedback, the [m|s|vs]seteienum,
[m|s|vs]clreienum, [m|s|vs]seteipnum, and [m|s|vs]clreipnum CSRs are
removed in the latest AIA draft v0.3.0 specification.
(Refer, https://github.com/riscv/riscv-aia/releases/tag/0.3.0-draft.31)
These CSRs were mostly for software convenience and software can always
use [m|s|vs]iselect and [m|s|vs]ireg CSRs to update the IMSIC interrupt
file bits.
We update the IMSIC CSR emulation as-per above to match the latest AIA
draft specification.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220616031543.953776-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The minimum priv spec versino for mcountinhibit to v1.11 so that it
is not available for v1.10 (or lower).
Fixes: eab4776b2bad ("target/riscv: Add support for hpmcounters/hpmevents")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220628101737.786681-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The riscv_cpu_realize() sets priv spec version to v1.12 when it is
when "env->priv_ver == 0" (i.e. default v1.10) because the enum
value of priv spec v1.10 is zero.
Due to above issue, the sifive_u machine will see priv spec v1.12
instead of priv spec v1.10.
To fix this issue, we set latest priv spec version (i.e. v1.12)
for base rv64/rv32 cpu and riscv_cpu_realize() will override priv
spec version only when "cpu->cfg.priv_spec != NULL".
Fixes: 7100fe6c24 ("target/riscv: Enable privileged spec version 1.12")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220611080107.391981-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Ibex CPU supports version 1.11 of the priv spec [1], so let's
correct that in QEMU as well.
1: https://ibex-core.readthedocs.io/en/latest/01_overview/compliance.html
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220629233102.275181-3-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is nothing in the RISC-V spec that mandates version 1.12 is
required for ePMP and there is currently hardware [1] that implements
ePMP (a draft version though) with the 1.11 priv spec.
1: https://ibex-core.readthedocs.io/en/latest/01_overview/compliance.html
Fixes: a4b2fa4331 ("target/riscv: Introduce privilege version field in the CSR ops.")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220629233102.275181-2-alistair.francis@opensource.wdc.com>
mcycle/minstret are actually WARL registers and can be written with any
given value. With SBI PMU extension, it will be used to store a initial
value provided from supervisor OS. The Qemu also need prohibit the counter
increment if mcountinhibit is set.
Support mcycle/minstret through generic counter infrastructure.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-8-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With SBI PMU extension, user can use any of the available hpmcounters to
track any perf events based on the value written to mhpmevent csr.
Add read/write functionality for these csrs.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-7-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the privilege specification v1.11, mcountinhibit allows to start/stop
a pmu counter selectively.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-6-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V privilege specification provides flexibility to implement
any number of counters from 29 programmable counters. However, the QEMU
implements all the counters.
Make it configurable through pmu config parameter which now will indicate
how many programmable counters should be implemented by the cpu.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-5-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The PMU counters are supported via cpu config "Counters" which doesn't
indicate the correct purpose of those counters.
Rename the config property to pmu to indicate that these counters
are performance monitoring counters. This aligns with cpu options for
ARM architecture as well.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-4-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the predicate function for PMU related CSRs only works if
virtualization is enabled. It also does not check mcounteren bits before
before cycle/minstret/hpmcounterx access.
Support supervisor mode access in the predicate function as well.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-3-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The predicate function calculates the counter index incorrectly for
hpmcounterx. Fix the counter index to reflect correct CSR number.
Fixes: e39a8320b0 ("target/riscv: Support the Virtual Instruction fault")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For a TOR entry to match, the stard address must be lower than the end
address. Normally this is always the case, but correct code might still
run into the following scenario:
Initial state:
pmpaddr3 = 0x2000 pmp3cfg = OFF
pmpaddr4 = 0x3000 pmp4cfg = TOR
Execution:
1. write 0x40ff to pmpaddr3
2. write 0x32ff to pmpaddr4
3. set pmp3cfg to NAPOT with a read-modify-write on pmpcfg0
4. set pmp4cfg to NAPOT with a read-modify-write on pmpcfg1
When (2) is emulated, a call to pmp_update_rule() creates a negative
range for pmp4 as pmp4cfg is still set to TOR. And when (3) is emulated,
a call to tlb_flush() is performed, causing pmp_get_tlb_size() to return
a very creatively large TLB size for pmp4. This, in turn, may result in
accesses to non-existent/unitialized memory regions and a fault, so that
(4) ends up never being executed.
This is in m-mode with MPRV unset, meaning that unlocked PMP entries
should have no effect. Therefore such a behavior based on PMP content
is very unexpected.
Make sure no negative PMP range can be created, whether explicitly by
the emulated code or implicitly like the above.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <3oq0sqs1-67o0-145-5n1s-453o118804q@syhkavp.arg>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The set of instructions that require decode_save_opc for
unwinding is really fairly small -- only insns that can
raise ILLEGAL_INSN at runtime. This includes CSR, anything
that uses a *new* fp rounding mode, and many privileged insns.
Since unwind info is stored as the difference from the
previous insn, storing a 0 for most insns minimizes the
size of the unwind info.
Booting a debian kernel image to the missing rootfs panic yields
- gen code size 22226819/1026886656
+ gen code size 21601907/1026886656
on 41k TranslationBlocks, a savings of 610kB or a bit less than 3%.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-4-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The function doesn't set mtval, it sets badaddr. Move the set
of badaddr directly into gen_exception_inst_addr_mis and use
generate_exception.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While we set env->bins when unwinding for ILLEGAL_INST,
from e.g. csrrw, we weren't setting it for immediately
illegal instructions.
Add a testcase for mtval via both exception paths.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1060
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 57c108b864 introduced gen_set_gpri(), which already contains
a check for if the destination register is 'zero'. The check in auipc
and lui are then redundant. This patch removes those checks.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220610165517.47517-1-victor.colombo@eldorado.org.br>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the ARM and RISCV specific helpers into
their own header file.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform the cleanup in the FIXME comment in common_semi_gdb_syscall.
Do not modify guest registers until the syscall is complete,
which in the gdbstub case is asynchronous.
In the synchronous non-gdbstub case, use common_semi_set_ret
to set the result. Merge set_swi_errno into common_semi_cb.
Rely on the latter for combined return value / errno setting.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When running a 32-bit guest, with a e64 vmv.v.x and vl_eq_vlmax set to
true the `tcg_debug_assert(vece <= MO_32)` will be triggered inside
tcg_gen_gvec_dup_i32().
This patch checks that condition and instead uses tcg_gen_gvec_dup_i64()
is required.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1028
Suggested-by: Robert Bu <robert.bu@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220608234701.369536-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are currently two types of RISC-V CPUs:
- Generic CPUs (base or any) that allow complete custimisation
- "Named" CPUs that match existing hardware
Users can use the base CPUs to custimise the extensions that they want, for
example -cpu rv64,v=true.
We originally exposed these as part of the named CPUs as well, but that was
by accident.
Exposing the CPU properties to named CPUs means that we accidently
enable extensions that don't exist on the CPUs by default. For example
the SiFive E CPU currently support the zba extension, which is a bug.
This patch instead only exposes the CPU extensions to the generic CPUs.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220608061437.314434-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to v-spec, tail agnostic behavior can be either kept as
undisturbed or set elements' bits to all 1s. To distinguish the
difference of tail policies, QEMU should be able to simulate the tail
agnostic behavior as "set tail elements' bits to all 1s".
There are multiple possibility for agnostic elements according to
v-spec. The main intent of this patch-set tries to add option that
can distinguish between tail policies. Setting agnostic elements to
all 1s allows QEMU to express this.
This commit adds option 'rvv_ta_all_1s' is added to enable the
behavior, it is default as disabled.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165449614532.19704.7000832880482980398-16@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The tail elements in the destination mask register are updated under
a tail-agnostic policy.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165449614532.19704.7000832880482980398-14@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Compares write mask registers, and so always operate under a tail-
agnostic policy.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165449614532.19704.7000832880482980398-12@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Compares write mask registers, and so always operate under a tail-
agnostic policy.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165449614532.19704.7000832880482980398-9@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
`vmadc` and `vmsbc` produces a mask value, they always operate with
a tail agnostic policy.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165449614532.19704.7000832880482980398-7@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Destination register of unit-stride mask load and store instructions are
always written with a tail-agnostic policy.
A vector segment load / store instruction may contain fractional lmul
with nf * lmul > 1. The rest of the elements in the last register should
be treated as tail elements.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165449614532.19704.7000832880482980398-6@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to v-spec, tail agnostic behavior can be either kept as
undisturbed or set elements' bits to all 1s. To distinguish the
difference of tail policies, QEMU should be able to simulate the tail
agnostic behavior as "set tail elements' bits to all 1s".
There are multiple possibility for agnostic elements according to
v-spec. The main intent of this patch-set tries to add option that
can distinguish between tail policies. Setting agnostic elements to
all 1s allows QEMU to express this.
This is the first commit regarding the optional tail agnostic
behavior. Follow-up commits will add this optional behavior
for all rvv instructions.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165449614532.19704.7000832880482980398-5@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to v-spec (section 5.4):
When vstart ≥ vl, there are no body elements, and no elements are
updated in any destination vector register group, including that
no tail elements are updated with agnostic values.
vmsbf.m, vmsif.m, vmsof.m, viota.m, vcompress instructions themselves
require vstart to be zero. So they don't need the early exit.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165449614532.19704.7000832880482980398-4@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
No functional change intended in this commit.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165449614532.19704.7000832880482980398-3@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
No functional change intended in this commit.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165449614532.19704.7000832880482980398-2@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
No functional change intended in this commit.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165449614532.19704.7000832880482980398-1@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add an MXL_RV128 case in two switches so that no error is triggered when
using the -cpu x-rv128 option.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220602155246.38837-1-frederic.petrot@univ-grenoble-alpes.fr>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Whether or not VSEIP is pending isn't reflected in env->mip and must
instead be determined from hstatus.vgein and hgeip. As a result a
CPU in WFI won't wake on a VSEIP, which violates the WFI behavior as
specified in the privileged ISA. Just use riscv_cpu_all_pending()
instead, which already accounts for VSEIP.
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220531210544.181322-1-abrestic@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for the zmmul extension v0.1. This extension includes all
multiplication operations from the M extension but not the divide ops.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220531030732.3850-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zicsr/Zifencei is not in 'I' since ISA version 20190608,
thus to fully express the capability of the CPU,
they should be exposed in isa_string.
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Tested-by: Jiatai He <jiatai2021@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <YoTqwpfrodveJ7CR@Sun>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the [m|s]tval CSRs are set with trapping instruction encoding
only for illegal instruction traps taken at the time of instruction
decoding.
In RISC-V world, a valid instructions might also trap as illegal or
virtual instruction based to trapping bits in various CSRs (such as
mstatus.TVM or hstatus.VTVM).
We improve setting of [m|s]tval CSRs for all types of illegal and
virtual instruction traps.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220511144528.393530-4-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, QEMU does not set hstatus.GVA bit for traps taken from
HS-mode into HS-mode which breaks the Xvisor nested MMU test suite
on QEMU. This was working previously.
This patch updates riscv_cpu_do_interrupt() to fix the above issue.
Fixes: 86d0c45739 ("target/riscv: Fixup setting GVA")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220511144528.393530-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When hypervisor and VS CSRs are accessed from VS-mode or VU-mode,
the riscv_csrrw_check() function should generate virtual instruction
trap instead illegal instruction trap.
Fixes: 0a42f4c440 (" target/riscv: Fix CSR perm checking for HS mode")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-Id: <20220511144528.393530-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"mimpid" cpu option was mistyped to "mipid".
Fixes: 9951ba94 ("target/riscv: Support configuarable marchid, mvendorid, mipid CSR values")
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220523153147.15371-1-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- setting ext_g will implicitly set ext_i
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220518012611.6772-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should separate "check" and "configure" steps as possible.
This commit separates both steps except vector/Zfinx-related checks.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <c3145fa37a529484cf3047c8cb9841e9effad4b0.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU allowed inconsistent configurations that made floating point
arithmetic effectively unusable.
This commit adds certain checks for consistent FP arithmetic:
- F requires Zicsr
- Zfinx requires Zicsr
- Zfh/Zfhmin require F
- D requires F
- V requires D
Because F/D/Zicsr are enabled by default (and an error will not occur unless
we manually disable one or more of prerequisites), this commit just enforces
the user to give consistent combinations.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <00e7b1c6060dab32ac7d49813b1ca84d3eb63298.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On ISA version 20190608 or later, "G" expands to "IMAFD_Zicsr_Zifencei".
Both "Zicsr" and "Zifencei" are enabled by default and "G" is supposed to
be (virtually) enabled as well, it should be safe to change its expansion.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <d1b5be550a2893a0fd32c928f832d2ff7bfafe35.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because "G" virtual extension expands to "IMAFD", we cannot separately
disable extensions like "F" or "D" without disabling "G". Because all
"IMAFD" are enabled by default, it's harmless to disable "G" by default.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <cab7205f1d7668f642fa242386543334af6bc1bd.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because ext_? members are boolean variables, operator `&&' should be
used instead of `&'.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <91633f8349253656dd08bc8dc36498a9c7538b10.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because some operating systems don't correctly parse long ISA extension
string, this commit adds short-isa-string boolean option to disable
generating long ISA extension strings on Device Tree.
For instance, enabling Zfinx and Zdinx extensions and booting Linux (5.17 or
earlier) with FPU support caused a kernel panic.
Operating Systems which short-isa-string might be helpful:
1. Linux (5.17 or earlier)
2. FreeBSD (at least 14.0-CURRENT)
3. OpenBSD (at least current development version)
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <7c1fe5f06b0a7646a47e9bcdddb1042bb60c69c8.1652181972.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit moves ISA string conversion for Zhinx and Zhinxmin extensions.
Because extension category ordering of "H" is going to be after "V",
their ordering is going to be valid (on canonical order).
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <7a988aedb249b6709f9ce5464ff359b60958ca54.1652181972.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector whole register load instructions have EEW encoded in the opcode,
so we shouldn't take SEW here. Vector whole register store instructions
are always EEW=8.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165181414065.18540.14828125053334599921-0@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
VS mode access to hypervisor CSRs should generate virtual, not illegal,
instruction exceptions.
Don't return early and indicate an illegal instruction exception when
accessing a hypervisor CSR from VS mode. Instead, fall through to the
`hmode` predicate to return the correct virtual instruction exception.
Signed-off-by: Dylan Reid <dgreid@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220506165456.297058-1-dgreid@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
- add zbk* and zk* strings to isa_edata_arr
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Tested-by: Jiatai He <jiatai2021@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220426095204.24142-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Two non-subsequent PTEs can be mapped to subsequent paddrs. In this
case, walk_pte will erroneously merge them.
Enforce the split up, by tracking the virtual base address.
Let's say we have the mapping:
0x81200000 -> 0x89623000 (4K)
0x8120f000 -> 0x89624000 (4K)
Before, walk_pte would have shown:
vaddr paddr size attr
---------------- ---------------- ---------------- -------
0000000081200000 0000000089623000 0000000000002000 rwxu-ad
as it only checks for subsequent paddrs. With this patch, it becomes:
vaddr paddr size attr
---------------- ---------------- ---------------- -------
0000000081200000 0000000089623000 0000000000001000 rwxu-ad
000000008120f000 0000000089624000 0000000000001000 rwxu-ad
Signed-off-by: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423215907.673663-1-ralf.ramsauer@oth-regensburg.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-15-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add SEED CSR which must be accessed with a read-write instruction:
A read-only instruction such as CSRRS/CSRRC with rs1=x0 or CSRRSI/CSRRCI
with uimm=0 will raise an illegal instruction exception.
- add USEED, SSEED fields for MSECCFG CSR
Co-authored-by: Ruibo Lu <luruibo2000@163.com>
Co-authored-by: Zewen Ye <lustrew@foxmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-13-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add sm3p0, sm3p1, sm4ed and sm4ks instructions
Co-authored-by: Ruibo Lu <luruibo2000@163.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-12-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add sha512sum0, sha512sig0, sha512sum1 and sha512sig1 instructions
Co-authored-by: Zewen Ye <lustrew@foxmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-11-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add sha256sig0, sha256sig1, sha256sum0 and sha256sum1 instructions
Co-authored-by: Zewen Ye <lustrew@foxmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-9-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add aes32esmi, aes32esi, aes32dsmi and aes32dsi instructions
Co-authored-by: Zewen Ye <lustrew@foxmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add xperm4 and xperm8 instructions
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- reuse partial instructions of zbc extension, update extension check for them
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220423023510.30794-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- reuse partial instructions of zbb extension, update extension check for them
- add brev8, pack, packh, packw, unzip, zip instructions
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220423023510.30794-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Allow user to set core's marchid, mvendorid, mipid CSRs through
-cpu command line option.
The default values of marchid and mipid are built with QEMU's version
numbers.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220422040436.2233-1-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Turn on native debug feature by default for all CPUs.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-6-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a subsection to machine.c to migrate debug CSR state.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-5-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds debug CSR read/write support to the RISC-V CSR RW table.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-4-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a config option to enable support for native M-mode debug.
This is disabled by default and can be enabled with 'debug=true'.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-3-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implement .debug_excp_handler, .debug_check_{breakpoint, watchpoint}
TCGCPUOps and hook them into riscv_tcg_ops.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-2-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V privilege spec defines that mtime is exposed as a memory-mapped
machine-mode read-write register. However, as QEMU uses host monotonic
timer as timer source, this makes mtime to be read-only in RISC-V
ACLINT.
This patch makes mtime to be writable by recording the time delta value
between the mtime value to be written and the timer value at the time
mtime is written. Time delta value is then added back whenever the timer
value is retrieved.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220420080901.14655-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is an overflow with the current code where a pmpaddr value of
0x1fffffff is decoded as sa=0 and ea=0 whereas it should be sa=0 and
ea=0xffffffff.
Fix that by simplifying the computation. There is in fact no need for
ctz64() nor special case for -1 to achieve proper results.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <rq81o86n-17ps-92no-p65o-79o88476266@syhkavp.arg>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The riscv_raise_exception function stores its argument into
exception_index and then exits to the main loop. When we
have already set exception_index, we can just exit directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220401125948.79292-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The spec for vmv<nf>r.v says: 'the instructions operate as if EEW=SEW,
EMUL = NREG, effective length evl= EMUL * VLEN/SEW.'
So the start byte for vstart != 0 should take sew into account
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220330021316.18223-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Linux kernel parses the ISA extensions from "riscv,isa" DT
property. It used to parse only the single letter base extensions
until now. A generic ISA extension parsing framework was proposed[1]
recently that can parse multi-letter ISA extensions as well.
Generate the extended ISA string by appending the available ISA extensions
to the "riscv,isa" string if it is enabled so that kernel can process it.
[1] https://lkml.org/lkml/2022/2/15/263
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Suggested-by: Heiko Stubner <heiko@sntech.de>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220329195657.1725425-1-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some bits in RISC-V `misa' CSR should not be reflected in the ISA
string. For instance, `S' and `U' (represents existence of supervisor
and user mode, respectively) in `misa' CSR must not be copied since
neither `S' nor `U' are valid single-letter extensions.
This commit also removes all reserved/dropped single-letter "extensions"
from the list.
- "B": Not going to be a single-letter extension (misa.B is reserved).
- "J": Not going to be a single-letter extension (misa.J is reserved).
- "K": Not going to be a single-letter extension (misa.K is reserved).
- "L": Dropped.
- "N": Dropped.
- "T": Dropped.
It also clarifies that the variable `riscv_single_letter_exts' is a
single-letter extension order list.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <4a4c11213a161a7eedabe46abe58b351bb0e2ef2.1648473008.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
LEN is not used for GEN_VEXT_VMV_WHOLE macro, so vmv<nr>r.v can share
the same helper
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220325085902.29500-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
for some cases, scale is always equal or less than 0, since lmul is not larger than 3
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220325085902.29500-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds initial support for the Sdtrig extension via the Trigger
Module, as defined in the RISC-V Debug Specification [1].
Only "Address / Data Match" trigger (type 2) is implemented as of now,
which is mainly used for hardware breakpoint and watchpoint. The number
of type 2 triggers implemented is 2, which is the number that we can
find in the SiFive U54/U74 cores.
[1] https://github.com/riscv/riscv-debug-spec/raw/master/riscv-debug-stable.pdf
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220315065529.62198-2-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V specification states that:
"Supervisor-level external interrupts are made pending based on the
logical-OR of the software-writable SEIP bit and the signal from the
external interrupt controller."
We currently only allow either the interrupt controller or software to
set the bit, which is incorrect.
This patch removes the miclaim mask when writing MIP to allow M-mode
software to inject interrupts, even with an interrupt controller.
We then also need to keep track of which source is setting MIP_SEIP. The
final value is a OR of both, so we add two bools and use that to keep
track of the current state. This way either source can change without
losing the correct value.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/904
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220317061817.3856850-3-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220317061817.3856850-2-alistair.francis@opensource.wdc.com>
Virt machine uses privileged specification version 1.12 now.
All other machine continue to use the default one defined for that
machine unless changed to 1.12 by the user explicitly.
This commit enforces the privilege version for csrs introduced in
v1.12 or after.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220303185440.512391-7-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V privileged specification v1.12 defines few execution
environment configuration CSRs that can be used enable/disable
extensions per privilege levels.
Add the basic support for these CSRs.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220303185440.512391-6-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V privileged specification v1.12 introduced a mconfigptr
which will hold the physical address of a configuration data
structure. As Qemu doesn't have a configuration data structure,
is read as zero which is valid as per the priv spec.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220303185440.512391-5-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To allow/disallow the CSR access based on the privilege spec, a new field
in the csr_ops is introduced. It also adds the privileged specification
version (v1.12) for the CSRs introduced in the v1.12. This includes the
new ratified extensions such as Vector, Hypervisor and secconfig CSR.
However, it doesn't enforce the privilege version in this commit.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220303185440.512391-4-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add the definition for ratified privileged specification version v1.12
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220303185440.512391-3-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the privileged specification version are defined in
a complex manner for no benefit.
Simplify it by changing it to a simple enum based on.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220303185440.512391-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to v-spec (section 7.9):
The instructions operate with an effective vector length, evl=NFIELDS*VLEN/EEW,
regardless of current settings in vtype and vl. The usual property that no
elements are written if vstart ≥ vl does not apply to these instructions.
Instead, no elements are written if vstart ≥ evl.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <164762720573.18409.3931931227997483525-0@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The ISA doesn't allow bare mappings to be cached, as the caches are
translations and bare mppings are not translated. We cache these
translations in QEMU in order to utilize the TLB code, but that leaks
out to the guest.
Suggested-by: phantom@zju.edu.cn # no name in the From field
Fixes: 1e0d985fa9 ("target/riscv: Only flush TLB if SATP.ASID changes")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220330165913.8836-1-palmer@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
These target-specific files use the target-specific CPU state
but lack to include "cpu.h"; i.e.:
../target/riscv/pmp.h:61:23: error: unknown type name 'CPURISCVState'
void pmpcfg_csr_write(CPURISCVState *env, uint32_t reg_index,
^
../target/nios2/mmu.h:43:18: error: unknown type name 'CPUNios2State'
void mmu_flip_um(CPUNios2State *env, unsigned int um);
^
../target/microblaze/mmu.h:88:19: error: unknown type name 'CPUMBState'; did you mean 'CPUState'?
uint32_t mmu_read(CPUMBState *env, bool ea, uint32_t rn);
^~~~~~~~~~
CPUState
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-10-f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-18-f4bug@amsat.org>
Co-authored-by: ardxwe <ardxwe@gmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220211043920.28981-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Co-authored-by: ardxwe <ardxwe@gmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220211043920.28981-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While changing to the use of cfg_ptr, the conditions for REQUIRE_ZB[ABCS]
inadvertently became inverted and slipped through the initial testing (which
used RV64GC_XVentanaCondOps as a target).
This fixes the regression.
Tested against SPEC2017 w/ GCC 12 (prerelease) for RV64GC_zba_zbb_zbc_zbs.
Fixes: f2a32bec8f ("target/riscv: access cfg structure through DisasContext")
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220203153946.2676353-1-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
timer_new_ns(), cpu_get_host_ticks() and NANOSECONDS_PER_SECOND are
declared in "qemu/timer.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220207082756.82600-8-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- add PTE_PBMT bits: It uses two PTE bits, but otherwise has no effect on QEMU, since QEMU is sequentially consistent and doesn't model PMAs currently
- add PTE_PBMT bit check for inner PTE
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- sinval.vma, hinval.vvma and hinval.gvma do the same as sfence.vma, hfence.vvma and hfence.gvma except extension check
- do nothing other than extension check for sfence.w.inval and sfence.inval.ir
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add PTE_N bit
- add PTE_N bit check for inner PTE
- update address translation to support 64KiB continuous region (napot_bits = 4)
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For non-leaf PTEs, the D, A, and U bits are reserved for future standard use.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Highest bits of PTE has been used for svpbmt, ref: [1], [2], so we
need to ignore them. They cannot be a part of ppn.
1: The RISC-V Instruction Set Manual, Volume II: Privileged Architecture
4.4 Sv39: Page-Based 39-bit Virtual-Memory System
4.5 Sv48: Page-Based 48-bit Virtual-Memory System
2: https://github.com/riscv/virtual-memory/blob/main/specs/663-Svpbmt-diff.pdf
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We add "x-aia" command-line option for RISC-V HART using which
allows users to force enable CPU AIA CSRs without changing the
interrupt controller available in RISC-V machine.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-18-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specification defines IMSIC interface CSRs for easy access
to the per-HART IMSIC registers without using indirect xiselect and
xireg CSRs. This patch implements the AIA IMSIC interface CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-16-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specification introduces new [m|s|vs]topi CSRs for
reporting pending local IRQ number and associated IRQ priority.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-14-anup@brainfault.org
[ Changed by AF:
- Fixup indentation
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specificaiton adds interrupt filtering support for M-mode
and HS-mode. Using AIA interrupt filtering M-mode and H-mode can
take local interrupt 13 or above and selectively inject same local
interrupt to lower privilege modes.
At the moment, we don't have any local interrupts above 12 so we
add dummy implementation (i.e. read zero and ignore write) of AIA
interrupt filtering CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-13-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA hvictl and hviprioX CSRs allow hypervisor to control
interrupts visible at VS-level. This patch implements AIA hvictl
and hviprioX CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-12-anup@brainfault.org
[ Changes by AF:
- Fix possible unintilised variable error in rmw_sie()
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specification adds new CSRs for RV32 so that RISC-V hart can
support 64 local interrupts on both RV32 and RV64.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-11-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA spec defines programmable 8-bit priority for each local interrupt
at M-level, S-level and VS-level so we extend local interrupt processing
to consider AIA interrupt priorities. The AIA CSRs which help software
configure local interrupt priorities will be added by subsequent patches.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220204174700.534953-10-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA device emulation (such as AIA IMSIC) should be able to set
(or provide) AIA ireg read-modify-write callback for each privilege
level of a RISC-V HART.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-9-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V AIA specification extends RISC-V local interrupts and
introduces new CSRs. This patch adds defines for the new AIA CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-8-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We define a CPU feature for AIA CSR support in RISC-V CPUs which
can be set by machine/device emulation. The RISC-V CSR emulation
will also check this feature for emulating AIA CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-7-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The machine or device emulation should be able to force set certain
CPU features because:
1) We can have certain CPU features which are in-general optional
but implemented by RISC-V CPUs on the machine.
2) We can have devices which require a certain CPU feature. For example,
AIA IMSIC devices expect AIA CSRs implemented by RISC-V CPUs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-6-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The guest external interrupts from an interrupt controller are
delivered only when the Guest/VM is running (i.e. V=1). This means
any guest external interrupt which is triggered while the Guest/VM
is not running (i.e. V=0) will be missed on QEMU resulting in Guest
with sluggish response to serial console input and other I/O events.
To solve this, we check and inject interrupt after setting V=1.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-5-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The hgeie and hgeip CSRs are required for emulating an external
interrupt controller capable of injecting virtual external interrupt
to Guest/VM running at VS-level.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-4-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A hypervisor can optionally take guest external interrupts using
SGEIP bit of hip and hie CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-3-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The guest should be able to set the vill bit as part of vsetvl.
Currently we may set env->vill to 1 in the vsetvl helper, but there
is nowhere that we set it to 0, so once it transitions to 1 it's stuck
there until the system is reset.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220201064601.41143-1-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the decoder and translation for the XVentanaCondOps custom
extension (vendor-defined by Ventana Micro Systems), which is
documented at https://github.com/ventanamicro/ventana-custom-extensions/releases/download/v1.0.0/ventana-custom-extensions-v1.0.0.pdf
This commit then also adds a guard-function (has_XVentanaCondOps_p)
and the decoder function to the table of decoders, enabling the
support for the XVentanaCondOps extension.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220202005249.3566542-7-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To split up the decoder into multiple functions (both to support
vendor-specific opcodes in separate files and to simplify maintenance
of orthogonal extensions), this changes decode_op to iterate over a
table of decoders predicated on guard functions.
This commit only adds the new structure and the table, allowing for
the easy addition of additional decoders in the future.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220202005249.3566542-6-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zb[abcs] support code still uses the RISCV_CPU macros to access
the configuration information (i.e., check whether an extension is
available/enabled). Now that we provide this information directly
from DisasContext, we can access this directly via the cfg_ptr field.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-5-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The implementation in trans_{rvi,rvv,rvzfh}.c.inc accesses the shallow
copies (in DisasContext) of some of the elements available in the
RISCVCPUConfig structure. This commit redirects accesses to use the
cfg_ptr copied into DisasContext and removes the shallow copies.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-4-philipp.tomsich@vrull.eu>
[ Changes by AF:
- Fixup checkpatch failures
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As the number of extensions is growing, copying them individiually
into the DisasContext will scale less and less... instead we populate
a pointer to the RISCVCPUConfig structure in the DisasContext.
This adds an extra indirection when checking for the availability of
an extension (compared to copying the fields into DisasContext).
While not a performance problem today, we can always (shallow) copy
the entire structure into the DisasContext (instead of putting a
pointer to it) if this is ever deemed necessary.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-3-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-2-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The addition of uxl support in gdbstub adds a few checks on the maximum
register length, but omitted MXL_RV128, an experimental feature.
This patch makes rv128 react as rv64, as previously.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220124202456.420258-1-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-24-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-23-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When swap regs for hypervisor, the value of vsstatus or mstatus_hs
should have the right XLEN. Otherwise, it will propagate to mstatus.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-22-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When sew <= 32bits, not need to extend scalar reg.
When sew > 32bits, if xlen is less that sew, we should sign extend
the scalar register, except explicitly specified by the spec.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-21-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The mask comes from the pointer masking extension, or the max value
corresponding to XLEN bits.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220120122050.41546-20-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Only check the range that has passed the address translation.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-19-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-18-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-17-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We need not specially process vtype when XLEN changes.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-16-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use cached cur_pmmask and cur_pmbase to infer the
current PM mode.
This may decrease the TCG IR by one when pm_enabled
is true and pm_base_enabled is false.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-15-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Define one common function to compute a canonical address from a register
plus offset. Merge gen_pm_adjust_address into this function.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-14-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Replace the array of pm_mask/pm_base with scalar variables.
Remove the cached array value in DisasContext.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-13-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220120122050.41546-12-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Write mask is representing the bits we care about.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-11-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-10-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
