that at least 8 bit modes seems to work (but overlay only partially)
* Added "hardware_cursor" option to the settings file - when set to "false", you should
have a cursor in the second output now as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17498 a95241bf-73f2-0310-859d-f6bbb57e9c96
without having a VESA mode set first (thanks to Stephan for noticing
this).
* intel_set_display_mode() now calls intel_propose_display_mode() to make
sure the mode passed in is valid. Note, B_PROPOSE_DISPLAY_MODE is still
not working correctly (which will cause problems for BWindowScreen and
friends).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17460 a95241bf-73f2-0310-859d-f6bbb57e9c96
introduced a lock that is used in B_SET_DISPLAY_MODE etc.
* Correctly implemented B_ACQUIRE_ENGINE and B_RELEASE_ENGINE now (ie. they lock
the engine now).
* The lock of the ring buffers is now deleted when the (primary) accelerant is closed.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17453 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Turns out cursor handling is simpler as originally thought, so I could remove its
physical mapping - it's still put into the shared area, though, although that isn't
needed for this chip (but could eventually simplify the handling of other generations
of this chip).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17450 a95241bf-73f2-0310-859d-f6bbb57e9c96
(in the kernel driver) fail - or crash the system.
* Waiting for VBLANK now works as expected - you actually have to *set* the bit
to clear it, isn't that obvious? :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17443 a95241bf-73f2-0310-859d-f6bbb57e9c96
is no good (or reliable) way to retrieve the physical address of "stolen"
(by the BIOS) graphics memory.
* Implemented allocation of additional graphics memory in case the BIOS was
a bit too cheap. We now guarantee 8 MB of memory available to the graphics
chip - would be nicer to only allocate that on demand, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17433 a95241bf-73f2-0310-859d-f6bbb57e9c96
I am also not sure if it's working correctly.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17425 a95241bf-73f2-0310-859d-f6bbb57e9c96
use it (which isn't really that bad).
* B_SCREEN_TO_SCREEN_BLIT is now working as intended, so we can finally move
windows and scroll at decent speed :-)
* Implemented a simple version of B_WAIT_ENGINE_IDLE for now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17422 a95241bf-73f2-0310-859d-f6bbb57e9c96
the usual order of other registers, so I mixed it up: vertical downscaling
is now working as expected as well.
* The downscaling factor was a tiny bit too low (one pixel from the view).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17414 a95241bf-73f2-0310-859d-f6bbb57e9c96
used, though.
* Renamed the PhyisicalPageMapper class to AreaKeeper and made it a bit more
generic (ie. it can now also create usual areas)
* The shared_info is now created using the AreaKeeper, too, and this actually
fixes some potential memory leaks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17412 a95241bf-73f2-0310-859d-f6bbb57e9c96
overlay - this will improve the overlay performance when the engine is
under load (the acceleration engine will use the primary lower priority
ring buffer).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17411 a95241bf-73f2-0310-859d-f6bbb57e9c96
mode), but you have to set the scaling UV registers in order to have correct
overlay.
* In other words, overlay is working now! There are still issues with it, which
can probably be attributed to missing bounds checks (the screen goes black
when you leave full-screen mode in VLC - but not if overlay just stops).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17365 a95241bf-73f2-0310-859d-f6bbb57e9c96
* As suggested by Korli, the signal is now encoded in the "reason" field of
wait_for_child().
* waitpid() now sets the status passed in so that the signal can be read out
(but it still doesn't do it's full job).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17338 a95241bf-73f2-0310-859d-f6bbb57e9c96
scan job in the calling thread).
* KDiskDeviceManager::InitialDeviceScan() now runs synchronously, so that
get_boot_partitions() doesn't need to do this ugly wait hack.
* KDiskDeviceManager::CreateFileDevice() can now run synchronously as well, which
fixes a deadlock in fs_mount() - note, mounting file devices still doesn't work,
though as Haiku's BFS doesn't allow this right now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17334 a95241bf-73f2-0310-859d-f6bbb57e9c96
the Intel chip obviously cannot do overlays in B_RGB16 - even though it pretends
to be able to do that.
* B_YCbCr422 seems to work, though, I haven't tested any other spaces for now, and
I somewhat doubt they will work. It's all green, though, and the scaling doesn't
seem to be correct - that we be solvable, though :)
* There aren't any bounds checks (so don't move the window out of the screen), and
also the overlay_view offsets are ignored.
* Scaling and moving is now detected, and there is always as little work done as
possible to reduce the workload on buffer switches (the most common case).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17315 a95241bf-73f2-0310-859d-f6bbb57e9c96
lsb to msb).
* The result is that there is now *something* to see when overlay is turned on. In
fact the whole screen goes dark besides a few pixels on the top - now isn't that
something? :-)
* The overlay is also turned off again correctly - which also revealed a bug in our
app_server: B_CONFIGURE_OVERLAY is not always called with window=NULL/view=NULL
to turn off overlay (might be an incorrect handling of BView::ClearOverlay()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17300 a95241bf-73f2-0310-859d-f6bbb57e9c96
when called with interrupts turned off, get_memory_map() will now call the new
vm_translation_map_ops::query_interrupt() call.
Under PPC, this is trivial (at least right now), but on x86 we need to make sure
we have access to the page table entry, ie. we need to create an area that points
to its own page table entry, so that we can map in the page table entry containing
the address we're looking for. It's not really nice, feel free to come up with
a cleaner solution :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17280 a95241bf-73f2-0310-859d-f6bbb57e9c96
always call all handlers in this case, but we still try to return the correct
return code (ie. B_HANDLED_INTERRUPT and B_INVOKE_SCHEDULER).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17278 a95241bf-73f2-0310-859d-f6bbb57e9c96
small) up for this specific task - this will later be used for the acceleration
engine as well.
Some more work on overlay initialization, doesn't do anything yet, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17254 a95241bf-73f2-0310-859d-f6bbb57e9c96
class, and only wraps around that one.
* Translating is no longer serialized, you can translate more than one object
at a time now.
* A BTranslator that is released (ie. deleted) will no longer let its BTranslatorRoster
crash.
* Removed BTranslatorRoster::Version() - this kind of call definitely makes no
sense at all. It's still exported from the sources, though, for backwards
compatibility.
* Simplified and improved code.
* Images are now unloaded only once.
* Added new method IsTranslator() that will be used by the DataTranslations preferences
application.
* Began implementing new methods StartWatching()/StopWatching() that will notify
you if new translators are installed or old ones removed (this will also be used
by DataTranslations once it's ready).
* The private BTranslatorRoster class will now add itself to the existing BApplication,
in order to provide automatic updating of the translators if needed (not yet implemented
though).
* Not heavily tested yet, there might be some regressions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17247 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The overlay register update buffer is now created and exported, ready
to be used.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17244 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The Decorator are temporarily using ui_color() - this needs to be changed
to use the DesktopSettings (when the decorator stuff gets refactored); right
now, the colors are fixed.
* Added B_WINDOW_TEXT_COLOR, B_WINDOW_INACTIVE_TAB_COLOR, and
B_WINDOW_INACTIVE_TEXT_COLOR to the UI colors, B_WINDOW_TAB_COLOR is no
longer deprecated. Note, however, that not every decorator may use these
colors.
* Removed unused and wrong (ie. hard-coded paths) stuff from ServerConfig.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17236 a95241bf-73f2-0310-859d-f6bbb57e9c96
read-only area shared between the Desktop and all applications.
* Right now, this area only contains the desktop colors, ie. B_PANEL_BACKGROUND_COLOR
etc.; ui_color() no longer needs to ask the server for these colors.
* The ui_colors are now maintained by DesktopSettings, though ColorSet is still there.
* The default colors are now hardcoded once and for everyone in InterfaceDefs.h, ie.
the app_server uses them as well.
* Desktop::Init() can now also return an error (but that is not yet accounted for).
* Cleaned up InterfaceDefs.h.
* Fixed wrong include in moreUTF8.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17232 a95241bf-73f2-0310-859d-f6bbb57e9c96
of graphics memory is now possible.
* Changed driver name to start with "intel_extreme" to have a nicer device
name.
* Renamed frame_buffer* stuff to graphics_memory* as the frame buffer just
happens to be located somewhere in the graphics memory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17224 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The functions now check the acquire_sem() result.
* mem_freetag() will return an status code now, too.
* Moved the mem_block and mem_info definitions into the source file; no
reason to have them public.
* You can now give the memory manager a name which it will use for its
heap area and lock.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17221 a95241bf-73f2-0310-859d-f6bbb57e9c96
* some fixes to make screen_blanker wait_for_thread() instead of
killing the screen saver thread, BScreenSaver::Stop() is now called
as well as its destructor
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17206 a95241bf-73f2-0310-859d-f6bbb57e9c96
is managed for those bitmaps:
- the shared client memory mechanism is used to allocate a small overlay_client_data
structure that contains the actual buffer and a semaphore that you have acquire in
order to access it.
- LockBits()/UnlockBits() now have a function: you need to call them before accessing
the overlay buffer, and you need to keep that lock until you're done with it.
* The overlay cookie is now an extra member of the ServerBitmap class.
* Removed fInitialized from ServerBitmap - IsValid() now just checks the buffer associated
with the bitmap.
* ViewLayer::Draw() will now handle overlay bitmaps specially and will draw the overlay
color instead of any contents (this is currently in ugly pink, but will become some
dark color later on).
* All what's missing from actually being able to use overlays now is to configure
them so that they are shown on screen. VLC will now show an empty pink window when
overlay video is enabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17201 a95241bf-73f2-0310-859d-f6bbb57e9c96
via the graphics driver (but not yet shown on screen).
I probably got the meaning of the "overlay count" wrong - I guess that you
can allocate any number of overlay bitmaps, but can only see "overlay count"
on screen at a time (right now, I only allow to create "overlay count" bitmaps).
Stephan?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17193 a95241bf-73f2-0310-859d-f6bbb57e9c96
systems a chance to know if they have locked already.
This fixes a locking problem in BFS where one thread tried to acquire two read
locks (where someone else trying to acquire a write lock would have caused a
dead lock).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17108 a95241bf-73f2-0310-859d-f6bbb57e9c96
to cut down on BRegion related allocations, cannot really tell
if it speeds things up
* used the new BRegion pool in WindowLayer and ViewLayer whereever
a BRegion was used on the stack
* fixed the debugging stuff in MultiLocker - it will get you into
the debugger if you
- try to nest read locks
- try to write lock when your are a reader already
- don't match up nested locks when your a writer
-> but only if you #define DEBUG 1 in the .cpp, is off by default now
* went over WindowLayer, ServerWindow, Desktop and a few other places
and fixed the locking for use with the MultiLocker, the "a reader can
not become a writer" is especially tricky, feel free to review the
changes
* activated the MultiLocker, I tested this quite a bit, if there are
problems simply turn on DEBUG and you should drop into the debugger
right where the problem is... hope all is good
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17046 a95241bf-73f2-0310-859d-f6bbb57e9c96
is public now, even if it may not yet be public and fixed API.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16995 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Some preparations to support more than one chipset, added i855G (device ID 0x3582)
to test with - the accelerant_device_info is now filled with that additional data
as well.
* Some minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16982 a95241bf-73f2-0310-859d-f6bbb57e9c96
it and rebuilding it on the server side (that causes a huge speed
up for regions containing many rects)
* There is a method in ServerLink that could have been used, but I
actually needed to add the direct BRegion support to LinkReceiver
* added LinkReceiver as a friend to BRegion class
* ServerApp and ServerWindow keep the CursorManager locked after they
have retrieved a cursor until they have called Acquire() on the
cursor. (Axel: what good is using atomic* stuff in Acquire() and
Release() if we have to protect this by a lock anyways?)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16957 a95241bf-73f2-0310-859d-f6bbb57e9c96
function, and added a vfs_disconnect_vnode() for other kernel components.
* devfs_unpublish_device() can now optionally make use of this call.
* Fixed the type check of devfs' unpublish_node().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16907 a95241bf-73f2-0310-859d-f6bbb57e9c96
though it looks so simple, I see no reason why it shouldn't work 8-)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16906 a95241bf-73f2-0310-859d-f6bbb57e9c96
information to identify the boot volume - if we want to be able to map all BIOS
drive IDs to the disks in the system, we need to do this always, though.
* Forgot to commit the updated disk_identifier.h in the last commit...
* Removed the unused dumpBlock() function from devices.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16892 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adapt other sources where needed (the boot loader's RootFileSystem still
used the old implementation).
* Implemented RootFileSystem::Rewind().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16889 a95241bf-73f2-0310-859d-f6bbb57e9c96
loader): it now supports holes between segments, and accepts any segment order.
* Renamed elf.c to elf.cpp and fixed warnings.
* Renamed elf_image_info::dynamic_ptr and eheader to dynamic_section and elf_header.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16878 a95241bf-73f2-0310-859d-f6bbb57e9c96
Only mode switches do work, doesn't yet make sure the mode is valid, though.
At this point, this driver only works on Haiku, the R5 app_server is crashing for some
reason I need to investigate some day (maybe tomorrow :)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16872 a95241bf-73f2-0310-859d-f6bbb57e9c96
BRect to clipping_rect with simple C casts. I think this
is more adequate, since clipping_rects are used for
pixel indices. This change fixes some graphics problems too,
it appears that cursor coords are fractional on Haiku, even
with a normal mouse. In Playground, this resulted in the
hit points being rendered wrongly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16840 a95241bf-73f2-0310-859d-f6bbb57e9c96
now on the amount of memory installed in the system. Ie. if you have only
128 MB the kernel heap will be only half in size.
* Minor cleanup in vm_page.c, renamed some variables to match our style guide.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16838 a95241bf-73f2-0310-859d-f6bbb57e9c96
now reflects the number of pages in the areas cache, instead of just the size of the
area.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16834 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed DisplaySupport.h, wasn't needed anymore.
* Removed private color set functions from InterfaceDefs.cpp - we might want
something similar, but definitely not like that.
* Minor cleanup, added some missing licenses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16831 a95241bf-73f2-0310-859d-f6bbb57e9c96
even though we might need something similar, we can't use it (since it was
based on BGet++).
* Removed BGet++, it's not used anymore.
* Removed ServerMemIO class, was never used.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16830 a95241bf-73f2-0310-859d-f6bbb57e9c96
all teams in serveral server areas, and instead of having to eventually clone
them all several times in BBitmap, we now have one or more areas per team,
and BBitmap will only clone areas once if needed. As a side effect, this
method should be magnitudes faster than the previous version.
* This method is also much more secure: instead of putting the allocation
maintenance structures into those everyone-read-write areas, they are now
separated, so that faulty applications cannot crash the app_server this
way anymore. This should fix bug #172.
* Freeing memory is not yet implemented though! (although all memory will
be freed upon app exit)
* There are now 3 different bitmap allocation strategies: per ClientMemoryAllocator
(ie. via ServerApp), per area (for overlays, not yet implemented), and using
malloc()/free() for server-only bitmaps.
* ServerBitmap now deletes its buffers itself.
* Cleaned up BBitmap and BApplication a bit.
* The test environment currently doesn't build anymore, will fix it next.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16826 a95241bf-73f2-0310-859d-f6bbb57e9c96
these should be public (they don't match any basic Be naming style
anyway :-).
* Put the code that's used by the app_server where it's needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16804 a95241bf-73f2-0310-859d-f6bbb57e9c96
That buys some more time before switching to a slab allocator :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16767 a95241bf-73f2-0310-859d-f6bbb57e9c96
This will allow to fix message related problems like drag and drop and scripting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16708 a95241bf-73f2-0310-859d-f6bbb57e9c96
and not to delete it.
* The header didn't include everything it needed.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16702 a95241bf-73f2-0310-859d-f6bbb57e9c96
take an empty region as an indication to remove the clipping, but on R5,
this is actually valid... this patch fixes the problem
* the ViewState::clipping_region is now consistently used to memorize
the user defined clipping of the view state instead of being sometimes
used to cache the current view clipping
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16656 a95241bf-73f2-0310-859d-f6bbb57e9c96
and a timeout.
* _user_wait_for_thread() was not interruptible before, ie. Control-C wouldn't
work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16654 a95241bf-73f2-0310-859d-f6bbb57e9c96
of that list.
* Added a vfs_free_unused_vnodes() function that calls the low memory handler
directly.
* create_sem_etc() now calls the above function in case there are no semaphores
available anymore; this usually frees up to 2 semaphores per node (one from
the cache if there is a file cache attached, and eventually one from the
file system).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16610 a95241bf-73f2-0310-859d-f6bbb57e9c96
or vm_cache_ref couldn't be created, instead of cleaning up and returning
an appropriate error.
* vm_cache_ref_create() no returns a status_t instead of the vm_cache_ref
(as that's part of the vm_cache anyway).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16602 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added some comments
* Added some checking to avoid noop shifts
* Added buffer length checks
* Implemented (as Stephan suggested) a version of ConvertBits() that takes offsets.
This new version allows to move a region of the source into a region (possibly not at the same point) on the dest while converting colorspaces on the fly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16592 a95241bf-73f2-0310-859d-f6bbb57e9c96
that put one or more full paths on the stack before, which could cause some
problems under certain conditions.
* Cleaned up KPath, ie. use size_t instead of int32 where appropriate, added
license.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16585 a95241bf-73f2-0310-859d-f6bbb57e9c96
I've put it into ColorConversion.cpp and moved PaletteConverter there too, cleaning up Bitmap.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16580 a95241bf-73f2-0310-859d-f6bbb57e9c96
(mounting still only works from the Terminal).
* Shuffled functions in node_monitor.cpp around to clearly differentiate between
private, private kernel, and public kernel functions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16575 a95241bf-73f2-0310-859d-f6bbb57e9c96
Colorspace conversion is not done yet so that it only works correct in 32bit modes.
Also drawCursor is not respected yet. Partially fixes bug 197.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16573 a95241bf-73f2-0310-859d-f6bbb57e9c96
before another one in the list.
* The video modes in the boot loader are now sorted (by resolution, larger
resolution comes first). Doubled entries are automatically removed; this
fixes bug #192.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16572 a95241bf-73f2-0310-859d-f6bbb57e9c96
free to continue (it would be nice to be notified before, though, in case
I get to it again in the next weeks).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16561 a95241bf-73f2-0310-859d-f6bbb57e9c96
windows to front (or minimize them).
* Desktop::ActivateWindow() no longer crashes in case the window to be activated
is not on the current workspace - instead, it doesn't do anything at this
point. IOW it doesn't handle workspace activation at all, yet.
* Renamed ServerWindow::GetWindowLayer() to ServerWindow::Window().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16550 a95241bf-73f2-0310-859d-f6bbb57e9c96
* AS_GET_STRING_WIDTHS now uses this method to send the strings to the app_server;
ie. it no longer sends the whole strings, and it saves sending the string length
separately.
* BFont::StringWidth() will now always return 0.0f in case of an error (instead of
some random value)
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16525 a95241bf-73f2-0310-859d-f6bbb57e9c96
* all cursors owned by a team are visually different,
or (iaw) an already existing cursor is reused when
it is set by the client again
* changed various occurances of cursor data from "int8*"
to "uint8*"
* ServerCursors also remember the R5 data from which
they were created
* the reference counting and destruction of
ServerCursors changed: The cursor knows it is attached
to a CursorManager and one can simply use
ServerCursor::Acquire() and Release() and the reference
counting and everything is being taken care of
* destroying a ViewLayer will now correctly release a set
ServerCursor
* fixed a race condition when setting a cursor through
BView::SetViewCursor(): If the client code looks like this:
BCursor cursor(cursorData);
someView->SetViewCursor(&cursor, false);
there is a relatively high chance the BCursor destructor
told the ServerApp thread to destroy the cursor before
the ServerWindow thread got to "acquire" the cursor for
use by the view layer. The very same problem is likely the
reason that SetViewCursor works to unreliably on R5, even
when the "sync" flag is set to "true" (although it should
theoretically work in that case).
all these fixes make WonderBrush work fine again with the
new support of custom cursors.... coded by axeld and myself
(the joys of pair programming :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16521 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added more char codes to is_white_space(), should be all I think
Sorry if I stepped on your toes Stephan, but I wanted these changes flushed before I leave for holidays :-).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16501 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reordered some functions
* Area messages can now be unflattened instead of using the private _Reference and a special port code
Passing by area is now mostly working but it's not yet enabled. I will have to conduct performance tests first to see if and starting at what messagesize the overhead is reasonable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16500 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added checksum generation and checking
The data itself is now checksummed too (unlike R5 where only the header gets a checksum). This might be a performance problem for larger messages. Opinions?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16482 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduced a _SetStringValue() to avoid code duplication.
* The string types now check the original value, and don't write anything if the
contents stay unchanged (with the current exception of the sniffer rules).
* The monitor notfication methods no longer "clobber" the status result.
* Major cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16432 a95241bf-73f2-0310-859d-f6bbb57e9c96
all those error output from the app_server.
* AS_LAYER_DELETE now gets a token, no longer frightening choice of parent.
* Removed locking in RemoveChild(); it has to be called locked now.
* Removed AS_LAYER_DELETE_ROOT as it's no longer needed.
* Removed support from BView for being PR3 compatible.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16424 a95241bf-73f2-0310-859d-f6bbb57e9c96
Input server now saves keyboard typematic settings whenever they are modified,
instead of wating until it is shutdown (which never happens, either the
system will crash, or the input_server will stay active after a normal shut down)
Same problems might apply to mouse and keymap settings.
Input server shutdown handling should be reviewed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16380 a95241bf-73f2-0310-859d-f6bbb57e9c96
used by the Deskbar (for "Hide All" and "Show All"). The latter doesn't work
correctly yet, though, it just maximizes all windows of that application.
* Added a TODO to ServerWindow AS_MINIMIZE_WINDOW on how to make it work correctly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16315 a95241bf-73f2-0310-859d-f6bbb57e9c96
got lost, before.
It might not work 100% correctly yet, but it works good enough to hide the Tracker
status window from the Deskbar, and thus, fixing bug #133.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16314 a95241bf-73f2-0310-859d-f6bbb57e9c96
the device manager is initialized. For x86 it does nothing, but
for PPC it searches for a supported interrupt controller and
remembers it for later use.
arch_int_{enable,disable}_io_interrupt() are implemented as
well as handling of external exceptions (aka as I/O interrupts).
We'll see later how well that works.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16271 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the FaceGetter as it was only needed for locking
* Cleaned up TruncateString()
* Fixed a typo in moreUTF8.h
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16252 a95241bf-73f2-0310-859d-f6bbb57e9c96
* At least 15 bit mode is broken, and should probably be removed.
* Cleanup - do we really need this class?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16247 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reworked functions like GetEscapements(), GetBoundingBoxesAsString() and GetGlyphShapes() completely
* Made the ServerFont functions uniform in their prototypes and cleaned out unnecessary arguments
* Added new UTF8 handling functions to moreUTF8.h that are now used by ServerFont
* Put the common transformations of the FT_Face into an own GetTransformedFace() to lessen code duplication
In other words, ServerFont is now cleaned and handles UTF8 pretty efficiently. Some ToDo's are still left though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16241 a95241bf-73f2-0310-859d-f6bbb57e9c96
to delete them accidently :)
* You should no longer call HWInterface::SetCursor(), but the new Desktop::SetCursor()
if you need to change the cursor.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16238 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed a myriad of bugs all over the place, ranging from locking errors to
deleting objects that don't belong to the one deleting them (hello HWInterface!)
* Almost all ServerWindow cursor stuff was broken; I've replaced all commands
to set a cursor with a single one AS_SET_CURSOR.
* Renamed some cursor commands.
* Changed the (broken) way ServerApp::fAppCursor was maintained - the application
cursor is now NULL as long as possible.
* Removed superfluous ServerCursor app signature stuff.
* The BApplication will no longer duplicate the default/I-beam cursors, it will
just reuse the default ones which now have fixed tokens.
* As a result, changing the cursor is now working as expected, closing bug #102.
* Rewrote Cursor.h, renamed private members to match our style guide.
* Minor cleanup.
What's still left to be done is reference counting the cursor objects to make them
work right and reliable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16237 a95241bf-73f2-0310-859d-f6bbb57e9c96
time of the idle thread as a measure, we now compute the CPU activity on
each thread switch - the time the CPU worked is the total of user and kernel
time a thread spent during its quantum.
Unlike before, this mechanism works correctly on SMP machines. I hope this
works as expected :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16193 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added syscalls _kern_set_cpu_enabled() and _kern_cpu_enabled().
* scheduler.c::sRunQueue::tail was not maintained at all; changed sRunQueue to
be a simple thread pointer instead of a struct thread_queue.
* Turns out we're monitoring CPU activity incorrectly when we've got more
than one CPU.
* Renamed the global CPU array from "cpu" to gCPU.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16186 a95241bf-73f2-0310-859d-f6bbb57e9c96
The test application lets run a thread at the highest priority that calls
yield all the time - the system stays responsible when it runs, so it seems
to work fine :)
Changed the malloc implementation to use _kern_thread_yield() instead of
snoozing.
We should think about making this call public, too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16166 a95241bf-73f2-0310-859d-f6bbb57e9c96
enqueueing a thread to the run queue.
This mechanism is now used for the thread priority boost on semaphore
release. Also, those threads are no longer made real time threads, they
now get a temporary priority of B_FIRST_REAL_TIME_PRIORITY - 1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16165 a95241bf-73f2-0310-859d-f6bbb57e9c96
moment, but committing since it's too late to continue working, and at
least the window is resized correctly...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16142 a95241bf-73f2-0310-859d-f6bbb57e9c96
different "force" levels now and updates the app file info attributes
for shared object files.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16123 a95241bf-73f2-0310-859d-f6bbb57e9c96
device tree for PCI controllers and make them known to the bus manager,
if we know how to talk with them. ATM we support only the UniNorth chip,
which can be found in G4 Macs (code ported from FreeBSD).
As far as I can judge it, all attached devices are identified correctly
on all three host bridges of my Mac mini.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16102 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved the Open Firmware function platform_get_next_device() from
the boot loader into the kernel (renamed to of_get_next_device()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16101 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BEntry::Remove() now uses _kern_remove_dir() for directories.
* Added fd parameter to _kern_remove_dir().
* Fixed LibBeAdapter's _kern_unlink() to only work on files, and
added _kern_remove_dir() for directories.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16078 a95241bf-73f2-0310-859d-f6bbb57e9c96
message header into account. It worked before at some point as BLooper was
letting the looper handle messages to invalid targets - they are now just
dropped.
This fixes bug #93.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16045 a95241bf-73f2-0310-859d-f6bbb57e9c96
can now safely unmount volumes that are still in use by some applications.
Minor fixes to the FD disconnection implementation:
* put_fd() checked the condition for being able to disconnect a descriptor
incorrectly (causing the FD to never be disconnected).
* remove_fd() would hand out disconnected descriptors (but should have
returned NULL for them).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15952 a95241bf-73f2-0310-859d-f6bbb57e9c96
code. The stack pointer was not adjusted, hence we were
overwriting the previous register value. But it looks like I
missed to check in the arch_cpu.h with the iframe structure
including the floating point registers anyway.
* Backported the ELF PPC relocation code from the boot loader to
the kernel.
* Fixed the PPC version of arch_thread_switch_kstack_and_call().
Apparently the signature had changed, but the assembly
implementation was not adjusted accordingly.
* sc prints more registers now (LR, CR, CTR, XER,...).
* Fixed several occurences of not-working fault handlers.
Apparently the compiler realized, that the "error" label was
never jumped to (by the code it knew), and optimized the
respective code away. Now we use a trick to make it think the
error label might actually be jumped to. I wonder whether the
x86 version has the same problem when being compiled with GCC4.
* Adopted the x86 page fault handling interrupt code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15933 a95241bf-73f2-0310-859d-f6bbb57e9c96
We don't do anything with it yet, though, so the BIOS will probably ignore us since
we are supposed to poll for events.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15900 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Cloned iframe stack management from x86.
* Reimplemented arch_thread_{get,set}_current_thread(). The
thread structure is stored in SPRG2. It is set to NULL in
arch_cpu_preboot_init(), now. A non-null current thread
causes all kinds of undesired behavior in early boot code.
* We establish the address space mappings we know from the
Open Firmware as areas. At least those in kernel address
space. The ones in userland address space are tougher.
Fortunately on my Mac mini there aren't any save the
boot_loader stack, which is not needed any longer anyway.
* Added stack trace support to the kernel debugger. Mostly
cloned and adjusted the x86 code. Some bits are still
missing, like stack traces for other threads.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15890 a95241bf-73f2-0310-859d-f6bbb57e9c96
void after turning off BAT for the segment containing itself.
The monster macro for the exception vector code was not really
elegant besides being too long for the 32 byte performance
monitor exception slot. Furthermore wasting three of the SPRG*
registers as cheap scratch memory wasn't that nice either.
We now have a three-step approach: The exception vectors
themselves contain only five instructions which branch to common
code at the beginning of the same physical page. That one sets
up BAT for itself, turns address translation back on and jumps
into the kernel. There we turn off BAT again, dump an iframe,
and enter the actual exception handler (/dispatcher). Upon return
the registers are restored from the iframe and we get back to the
place where the exception occurred.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15881 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fixed weird pointer conversion in SetStyle()
* fixed a potential mix up in operator=() in case the
other ServerFont has fStyle == NULL
ServerWindow:
* the WindowLayer fTopLayer cannot be deleted by
client request, just for safety reasons
* the link is flushed if there is no drawing engine,
but this case is theoretical only
* deleting the ServerWindow object syncs with the
client, so that when BBitmaps are deleted, they
can be sure there are no pending messages (which
would be executed in a nother thread)
* there is no timeout anymore when sending messages
to the client, which made absolutely no sense
AGGTextRenderer:
* renamed fFontManager to fFontCache, because that's
what it really is
* fLastFamilyAndStyle defaulted to the system plain
font and therefor that font was never loaded when
the font never changed meanwhile
DrawingMode:
* I'm not quite sure but I think there was the
potential of a division by zero, at least I
had crashes with "divide error"
HWInterface:
* fix update when the cursor shape changed in
double buffered mode
ViewLayer:
* since the top layer is never really deleted
before its time has come, it is not necessary
to set it to NULL in the ViewLayer destructor
ViewLayer/WindowLayer:
* added a function to collect the view tokens
that are affected by an update session
EventDispatcher:
* use the importance of the message for the timeout
in _SendMessage()
* drop mouse moved events in the server if we're
lagging behind more than 5 ms (Axel, maybe review)
View:
* there were some problems with the locking
of the BWindow looper in RemoveSelf(), since
this is called from the window destructor,
also of BWindows from BBitmaps, which have
never been run (this might need review), at
least I seem to have solved the crashing
problems introduced by actually deleting the
view hirarchy in the BWindow destructor
* fixed _Draw() for being used non-recursively,
temporarily disabled DrawAfterChildren, which
didn't work yet anyways (because views cannot
draw over children in the server yet)
Window:
* small cleanup when deleting shortcuts
* sync with the server when having send
AS_DELETE_WINDOW (see ServerWindow above)
* fixed locking in Begin/EndViewTransaction()
* removed folding of _UPDATE_ messages, since
there is only one ever in the queue
* set the fInTransaction flag during an update,
I plan to use this in BView later to
flush the link when drawing outside of an
update
* BView::_Draw() is now called by view token,
this gives the next leap forward in speed,
the overhead because of drawing clean views
was considerable
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15878 a95241bf-73f2-0310-859d-f6bbb57e9c96
The time base conversion factor is the 32 bit value
2^32 * 1000000 / time base frequency,
so the system time can be computed by
system time = time base * conversion factor / 2^32.
The expression in system_time() looks more complicated now, but is
actually much faster (factor 2.5 on my Mac mini). I'm positively
surprised, how good the assembly looks, that GCC 4 generates. There's
not that much potential for optimization by hand-coding the function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15863 a95241bf-73f2-0310-859d-f6bbb57e9c96
parts, too. Fixed a potential overflow.
* The generic physical page mapper reserves the virtual address range
for the IO space now, so that noone can interfere until an area has
been created. The location of the IO space is no longer fixed; it
didn't look to me like it was necessary for x86, and we definitely
need to be flexible for PPC.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15855 a95241bf-73f2-0310-859d-f6bbb57e9c96
now run under BeOS as well (as long as they don't use any functions that are not
available under R5).
The solution is a bit messy, but we have to live with it :-)
The runtime loader now patches the __gRuntimeLoader symbol in libroot.so to point
to its exported structure instead of passing it to the init functions as an
argument.
(Hax0red by axeld and bonefish on stippi's assimilated machine -- resistence is futile)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15848 a95241bf-73f2-0310-859d-f6bbb57e9c96
device in the Open Firmware implementation of boot loader and
pass its path to the kernel, where it's opened and used for
getting/setting the real time. The expensive atomic_*64() on PPC
32-bit make things a bit more complicated. Moreover, missing
64 bit multiplication and division instructions won't really
allow system_time() to be anywhere near as fast as on x86. :-/
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15837 a95241bf-73f2-0310-859d-f6bbb57e9c96
substructure now (that's the only member actually). The system time
offset is therefore accessed via architecture specific accessor
functions.
Note, that this commit breaks the PPC build. Since I want to rename at
least one file I've already changed, I can't avoid that.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15835 a95241bf-73f2-0310-859d-f6bbb57e9c96
(year, month,...) representation out of the x86 specific code and put
respective support functions into real_time_clock.c. We'll need those
for the PPC specific part too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15827 a95241bf-73f2-0310-859d-f6bbb57e9c96
Basically the architecture specific code is now responsible to
init and make use of the platform specific code, now. The reason
being that we have only one kernel per platform and thus cannot
decide at compile time, which platform to use (if any).
The PPC implementation features an abstract base class PPCPlatform
(implemented for all supported platforms) through which platform
support is provided.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15824 a95241bf-73f2-0310-859d-f6bbb57e9c96
bus, and time base frequency) in the PPC boot loader, and propagate
them to the kernel via kernel_args.
* Now we use the correct time base frequency for timer calculations.
* Implemented PPC specific system info stuff. Added a few PPC CPU
types to <OS.h>.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15817 a95241bf-73f2-0310-859d-f6bbb57e9c96
remapping stuff into separate functions and made them available to
others.
* Remap the exception handler space in arch_int_init_post_vm() into the
kernel address space (same issue as with the page table).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15783 a95241bf-73f2-0310-859d-f6bbb57e9c96
According to the spec we need to set it before taking over the MMU,
but we can't call it before arch_mmu_init(), since we need the OF
to allocate the page table. So we do it after we have allocated
the new page table.
* Added PPC specific kernel_args: The virtual address ranges we want
to keep in the kernel. We fill that in with the translations we
find when initializing the MMU stuff. We remove the memory the
boot loader occupies from those. Besides the stack for the boot
loader only the OF stuff remains.
* arch_mmu_allocate() now starts to search at KERNEL_BASE for a free
virtual address when no particular address is requested. This saves
us further trouble in the kernel, since those allocations would
need to be remapped otherwise.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15780 a95241bf-73f2-0310-859d-f6bbb57e9c96
brick wall collisions. Along the way I found a few defines that no longer
exist in Haiku - changed B_BEOS_VERSION_DANO to use Haiku versions (anyone
rebuilding under Dano might want to undo it). By the way, the BeOS version
number define system might be worth using, since it's a numerical compare
rather than #if defined(V1) || defined (V2) || defined (V3) and so on.
What sort of errors? Besides needing libzeta.so for some things, the
networking compatibility compile doesn't work (libbind and all that).
Some examples among many:
In file included from /boot/home/Haiku/src/kits/mail/numailkit.cpp:14:
/boot/develop/headers/be/support/Autolock.h:3: using directive `BAutolock' introduced ambiguous type `BAutolock'
In file included from /boot/home/Haiku/src/kits/network/compat/libnet/netdebug.c:6:
/boot/home/Haiku/headers/private/net/netdebug.h:32: syntax error before `void'
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15775 a95241bf-73f2-0310-859d-f6bbb57e9c96
the fact that I couldn't find ptesync in an otherwise more complete
documentation I downloaded yesterday made me suspicious.
* arch_cpu_global_TLB_invalidate() uses tlbia now. The instruction is
optional, but so is tlbie (how I understood it is that both exist,
when the architecture implementation has a TLB). And the former loop
looked just scary.
* Implemented arch_cpu_user_TLB_invalidate(). It does just the same as
arch_cpu_global_TLB_invalidate().
* Some changes with respect to synchronization required on page table
and segment register updates.
* Some more minor renaming. Pulled a new function
remove_page_table_entry() out of unmap_tmap().
* In arch_vm_translation_map_init_post_area() we do now remap the page
table into the kernel address space, if it was without before. The
page table might actually be a good application for BAT, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15773 a95241bf-73f2-0310-859d-f6bbb57e9c96
{HAIKU,HOST,TARGET}_KERNEL_PIC_{CC,LINK}FLAGS which define the
compiler/linker flags specifying the kind of position independence
the kernel shall have. For x86 we had and still have -fno-pic, but the
PPC kernel has -fPIE (position independent executable) now, as we
need to relocate it.
* The boot loader relocates the kernel now. Mostly copied the relocation
code from the kernel ELF loader. Almost completely rewrote the PPC
specific relocation code, though. It's more correct and more complete now
(some things are still missing though).
* Added boot platform awareness to the kernel. Moved the generic
Open Firmware code (openfirmware.c/h) from the boot loader to the kernel.
* The kernel PPC serial debug output is sent to the console for the time
being.
* The PPC boot loader counts the CPUs now and allocates the kernel stacks
(made OF device iteration a bit more flexible on the way -- the search
can be restricted to subtree). Furthermore we really enter the kernel...
(Yay! :-) ... and crash in the first dprintf() (in the atomic_set()
called by acquire_spinlock()). kprintf() works, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15756 a95241bf-73f2-0310-859d-f6bbb57e9c96
as only the BitmapManager class is allowed to call them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15718 a95241bf-73f2-0310-859d-f6bbb57e9c96
specifying whether only the exact supplied address is acceptable. If
false, the address is considered a hint only. It will be picked, if
available, otherwise a greater address is tried to be acquired, and
as last resort any address. This feature is only implemented for PPC.
It is needed since the preferred kernel text base address 0x80000000
might not be available (and actually isn't on my Mac mini).
* Fixed a bug in the PPC memory management code:
is_{virtual,physical}_allocated() were checking whether the given
range was completely contained by an existing range instead of
checking for intersection. As a consequence we could (and did) allocate
a range intersecting with already allocated ranges. The kernel segment
thus overwrote OF memory for instance.
* The ELF loader makes sure that it got both text and data segment of
the image to be loaded.
The PPC boot loader successfully loads kernel and modules now. Next
comes the hard part, I'm afraid.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15708 a95241bf-73f2-0310-859d-f6bbb57e9c96
IP, and UDP, as well as a home brewn UDP based protocol, "remote disk",
which provides random access to a single remote file/device. The Open
Firmware flavored boot loader automatically initializes the net stack,
searches for a remote disk, and tries to boot from it, if the boot
device is a network device (e.g. when loading the boot loader via
TFTP).
This is quite nice for developing with a two-machine setup, since one
doesn't even need to install Haiku on the test machine anymore, but can
serve it directly from the development machine. When the networking
support in the kernel is working, this method could even be used to
fully boot, not just for loading kernel and initial modules.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15689 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_cache_ref starts with a reference count of 1. When acquiring a vm_cache,
you no longer need to worry if that should go through the vm_store, or not;
as it now always does.
* map_backing_store() no longer needs to play with the vm_cache_ref
references.
* that simplified some code.
* vfs_get_vnode_cache() now grabs a reference to the cache, if successful.
* better balanced vnode ownership on vnode_store creation (vnode_store
released the vnode before if its creation failed).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15641 a95241bf-73f2-0310-859d-f6bbb57e9c96
this saves 4 bytes per page. To compensate the loss of bytes, the offset is now
stored in page size units, that's enough to address 2^44 or 16 TB (which is now
the maximal supported file size!).
* Renamed vm_page::ppn to physical_page_number.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15637 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch/*/thread_struct.h to arch_thread_types.h, so that it can directly
be included without having to specify the architecure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15616 a95241bf-73f2-0310-859d-f6bbb57e9c96
them apart (this even saves a pointer from vm_virtual_map to its address space)
* aspace -> address_space
* vm_create_address_space() did not check if creating the semaphore succeeded
* Removed team::kaspace - was not really needed (introduced a new vm_kernel_address_space()
function that doesn't grab a reference to the address space)
* Removed vm_address_space::name - it was just a copy of the team name, anyway,
and there is always only one address space per team
* Removed aspace_id - the address space is now using the team_id
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15609 a95241bf-73f2-0310-859d-f6bbb57e9c96
written the page, we now do it before, so that it cannot lose any changed data
anymore; it doesn't matter if the page is written to while writing it back, the
worst thing that can happen is that we write the same page twice. Also, we don't
rely on the PAGE_MODIFIED bit anymore, we now check all mappings of that page
to find all modified pages, no matter how far the (currently disabled) page
daemon had come.
Also, destroying an area will now result in writing back changed pages - this
is only really important for memory mapped files, though, and should probably
be avoided for other vm_store types.
Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15597 a95241bf-73f2-0310-859d-f6bbb57e9c96
Moved some headers around and cleaned them up.
Fixed threading code in libbind.so. Don't know why I hadn't noticed this before. Now it is reliable, but uses an even uglier hack.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15585 a95241bf-73f2-0310-859d-f6bbb57e9c96
mappings yet, that's a good way to test this functionality.
* Turns out the directory of the mappings must be known already - they
should be added automatically, but I've added them manually for now
(which is okay for the default system directory).
* Having more than one style with the same family in the mappings didn't
work as planned - it now does.
* On my current system, time spend in the font manager constructor went
down from 1.5 secs to around 12000 usecs (and I have only a moderate
number of fonts installed, or so I thought - looks like the mappings
were a good idea :-)) - and that directly cuts down the boot time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15580 a95241bf-73f2-0310-859d-f6bbb57e9c96
service depends on it, it doesn't make any sense to call it that early in the
game.
* The VFS now has a low memory handler for vnodes as well. If there is enough
memory left, it won't free any vnodes anymore.
* Potential crashing bug fix: some functions did not check if the FD passed
in belonged to the right type; they just assumed it had a valid vnode, but
it could have had a mount structure associated as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15566 a95241bf-73f2-0310-859d-f6bbb57e9c96
memory status.
Added new B_NO_LOW_MEMORY constant for the usual case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15551 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel TLBs from being flushed on context switch.
* new arch_cpu_user_TLB_invalidate() that now does what arch_cpu_global_TLB_invalidate()
did before.
* arch_cpu_global_TLB_invalidate() will now flush all TLBs, even those from the
kernel.
* some cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15535 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The boot loader now checks the CPU for the cpuid and rdtsc features, which we
currently both rely on.
* Removed old and no longer used stage2_priv.h header
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15534 a95241bf-73f2-0310-859d-f6bbb57e9c96
has not yet been tested, though - I'll do this after this commit):
* Removed the arch_memory_type stuff from vm_area; since there are only 8 memory
ranges on x86, it's simply overkill. The MTRR code now remembers the area ID
and finds the MTRR that way (it could also iterate over the existing MTRRs).
* Introduced some post_modules() init functions.
* If the other x86 CPUs out there don't differ a lot, MTRR functionality might
be put back into the kernel.
* x86_write_msr() was broken, it wrote the 64 bit number with the 32 bit words
switched - it took me some time (and lots of #GPs) to figure that one out.
* Removed the macro read_ebp() and introduced a function x86_read_ebp()
(it's not really a time critical call).
* Followed the Intel docs on how to change MTRRs (symmetrically on all CPUs
with caches turned off).
* Asking for memory types will automatically change the requested length to
a power of two - note that BeOS seems to behave in the same, although that's
not really very clean.
* fixed MTRRs are ignored for now - we should make sure at least, though,
that they are identical on all CPUs (or turn them off, even though I'd
prefer the BIOS stuff to be uncacheable, which we don't enforce yet, though).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15528 a95241bf-73f2-0310-859d-f6bbb57e9c96
* finally nailed that much hated bug where the
wrong background underneath the cursor was restored.
I always looked for this in the wrong place -
of course, you cannot blit regions on top
of the cursor and expect the backup of the
background to be magically valid still... ;-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15461 a95241bf-73f2-0310-859d-f6bbb57e9c96
is known by the server, anyway.
* B_MODAL_SUBSET_WINDOW_FEEL now also works as expected.
* Renamed AS_REM_FROM_SUBSET to AS_REMOVE_FROM_SUBSET.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15285 a95241bf-73f2-0310-859d-f6bbb57e9c96
* renamed some Decorator functions like GetLook() to Look().
* renamed _look to fLook and _flags to fFlags.
* removed the feel from decorators - they don't need to know
or care about the feel.
* the DefaultDecorator didn't allow resizing of modal windows.
* DefaultDecorator::SetTitle() no longer clears the passed
in updateRegion, it just fills it (so that you can call
more than one of these methods after the other, and still
get a correct update region).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15266 a95241bf-73f2-0310-859d-f6bbb57e9c96
know what's going on, but this appears to fix it. And since we'll get a new glyph
layout backend sooner or later, I don't want to mess with that stuff again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15176 a95241bf-73f2-0310-859d-f6bbb57e9c96
an app_server code. It's always up-to-date as it just reads the header
directly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15148 a95241bf-73f2-0310-859d-f6bbb57e9c96
* RootLayer's mouse event processing is now at its minimum - the
EventDispatcher handles them now. As a result, a window will now
get only one message per event.
* RootLayer adds "_view_token" to mouse moved messages that specify
the view currently under the cursor.
* There is now a mouse event layer in RootLayer that gets preferred
when it's set - this is now used for the window moving instead of
the previous mechanism.
* changed the previous DistributeMessage() to an UnpackMessage()
method following Adi's suggestion.
* caveat: some things might be functionally broken in RootLayer now
because of removing the mouse notification stuff.
* "be:transit" handling is now done completely client side by
BWindow::_SanitizeMessage(() (similar to what the input_server does).
This should also make the mechanism pretty robust, since every
B_MOUSE_MOVED message can now trigger the view transit (in case a
message is lost). B_WINDOW_ACTIVATED messages should be generated
client side as well.
* renamed AS_LAYER_GET_MOUSE_COORDS to AS_GET_MOUSE as it's not a
layer specific command, and also gets the mouse buttons.
* B_MOUSE_* messages from the up server now contain only a "screen_where"
field; "where" (in window's coordinates) and "be:view_where" are
added in BMessage::_SanitizeMessage().
* messages that don't have a valid target in the looper are now
dropped instead of being sent to the looper - this should be done
in BLooper as well, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15087 a95241bf-73f2-0310-859d-f6bbb57e9c96
task_looper() again.
* removed BMessenger::fPreferred - whenever you had to specify "usePreferred" separately,
you don't have to do that anymore - use B_PREFERRED_TOKEN instead.
* fixed BTokenSpace::GetToken() semantics: it will no longer touch the "object" argument
in case of failure.
* Introduced a BWindow::_DistributeMessage() that will be part of the event dispatcher
counterpart to the app_server (the other will be _DetermineTarget()).
* Made it easier to use Michael's Message4 implementation: just add the following line
to your UserBuildConfig:
AppendToConfigVar DEFINES : HAIKU_TOP src : USING_MESSAGE4 : global ;
* Introduced ServerWindow::HandlerMessenger() and FocusMessenger() - the first will
target the client handler, while the other will target the preferred handler of the
client looper (usually the view having focus).
* Fixed dano message unflattening in the Message4 code.
* Changed BMessage::PrintToStream() to no longer use macros in the Message4 implementation.
* I hope that's all - it's a huge change, but it's all connected.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15046 a95241bf-73f2-0310-859d-f6bbb57e9c96
used once now. If tokens were reused, you could eventually target the wrong
(but valid again) messenger.
* removed unused stuff (like GetList()).
* some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15028 a95241bf-73f2-0310-859d-f6bbb57e9c96
distribute any messages to the clients yet.
* removed the working thread from RootLayer - for now, its event handlers are
still called using input filters in the new event dispatcher, though (to
get things started).
* ServerApp is now using a BMessenger to identify its client, and no longer
stores the port/token separately.
* the input_server handshake is a bit simpler now, as it can now just reply
to the app_server message, removed unused code from ServerProtocol.h
* calmed down the MultiLocker (it always printed thread statistics on startup,
because it's compiled in debug mode).
* removed the cursor thread stuff from AppServer.cpp
* the new event dispatcher now uses a cursor thread when supported (only in
native mode, not in the test environment), although it improves cursor
movement under Qemu, the effect is not as good as expected - this might
need some more investigations (might just be a thread priority problem).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15012 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rewrote event handling: instead of writing every single device message to
the event port, they are just queued in a list, and the event loop is only
notified if necessary (ie. if a notification has been sent already, new
events are just queued up until the input_server found the time to process
them).
* This also fixed a big memory leak: every message processed by EnqueueDeviceMessage()
(IOW every key or mouse event) was leaked!
* no longer abuses gInputMethodListLocker to lock the method event queue
(it now uses the standard event queue lock).
* removed the completely superfluous, weird and decelerating event caching mechanism
* tried to find a better distribution of work between _SanitizeEvents(),
_MethodizeEvents(), and _DispatchEvents().
* HandleSetMousePosition() now only does what it's supposed to do (this currently
causes the mouse to jump at the start, though).
* now uses the "Message4" for message sending if available.
* fixed "kb_mouse_settings.h" to include all headers it needs.
* some more cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14966 a95241bf-73f2-0310-859d-f6bbb57e9c96
temporary handling code in the app_server.
* RootLayer no longer creates the input_server messaging port - this is now
the responsibility of the input_server.
* Moved AS_CREATE_[OFFSCREEN_]WINDOW from ServerApp::_MessageLooper() to
_DispatchMessage().
* The RootLayer thread is now started as soon as the input_server is there.
* removed or disabled any input_server stuff in the AppServer class.
* removed old message commmands to the app_server.
* Removed the R5_CURSOR_COMM and HAIKU_APPSERVER_COMM definitions: the
input_server is now automatically built correctly depending on the target.
* InputServer::EventLoop() plays now safe and checks for error conditions.
* InputServer::EnqueueDeviceMessage() seems to leak memory, added TODO about
this.
* InputServer event loop messaging uses ports for inner-app communication - why?
* The InputServer event loop thread is no longer killed on exit, it just quits
when its port is gone.
* Minor cleanup in input_server.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14949 a95241bf-73f2-0310-859d-f6bbb57e9c96
have different token spaces depending on the scope of its objects.
* removed TokenHandler - we're now using BTokenSpace instead.
* removed unused IPoint.cpp - if we ever need it again, it can still easily be
resurrected from the dead.
* some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14925 a95241bf-73f2-0310-859d-f6bbb57e9c96
it must now fill the updateRegion parameter of SetTitle().
* WinBorder::SetName() is now greatly simplified and achieves better results
due to that.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14923 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BPrivateScreen now buffers its frame for 0.1 seconds (so that calling it several
times in a row is both consistent and cheap).
* Added GetFrameBufferConfig() call to the HW interface (and implemented it).
* Added server commands AS_VALID_SCREEN_ID, AS_GET_NEXT_SCREEN_ID, and
AS_GET_FRAME_BUFFER_CONFIG.
* BPrivateScreen::BaseAddress() and BPrivateScreen::BytesPerRow() are now working.
* minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14915 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduced and implemented AS_GET_SCREEN_ID_FROM_WINDOW - it only returns B_MAIN_SCREEN_ID,
though.
* renamed ServerWindow::fHandlerToken to fClientToken.
* The BScreen(BWindow *) constructor now really asks the server for the screen ID.
* ServerApp::fWindowList is now a BObjectList.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14910 a95241bf-73f2-0310-859d-f6bbb57e9c96
it works in the test environment, but I haven't yet tested it on real hardware.
* moved PrivateScreen.h to src/kits/interface/ - it's not used outside of that one.
* moved reading the color map from the BPrivateScreen constructor to the ColorMap()
method.
* improved/cleaned server/client communication for the screen stuff a tiny bit.
* fixed the GetBitmap() method I implemented yesterday.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14908 a95241bf-73f2-0310-859d-f6bbb57e9c96
* no more libappserver.so - this breaks the "Appearance" application, but that
has to be fixed some day later.
* the drawing stuff is now built in its own directory as libasdrawing.a.
* TEST_MODE defaults to "0" if not defined yet - it's overridden in the test
build now, not in the main build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14896 a95241bf-73f2-0310-859d-f6bbb57e9c96
categories:
* Missing includes (like <stdlib.h> and <string.h>).
* Linking against $(TARGET_LIBSTDC++) instead of libstdc++.r4.so.
* Local variables shadowing parameters.
* Default parameters in function definitions (as opposed to function
declarations).
* All C++ stuff (nothrow, map, set, vector, min, max,...) must be imported
explicitly from the std:: namespace now.
* "new (sometype)[...]" must read "new sometype[...]", even if sometype is
something like "const char *".
* __FUNCTION__ is no longer a string literal (but a string expression), i.e.
'printf(__FUNCTION__ ": ...\n")' is invalid code.
* A type cast results in a non-lvalue. E.g. "(char *)buffer += bytes"
is an invalid expression.
* "friend class SomeClass" only works when SomeClass is known before.
Otherwise the an inner class with that name is considered as friend.
gcc 4 is much pickier about scopes.
* gcc 4 is generally stricter with respect to type conversions in C.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14878 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Some work on _DetermineTarget(), more to come.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14869 a95241bf-73f2-0310-859d-f6bbb57e9c96
Right now, only the updates are disabled as a start. I am not sure what else
we can do here, but there probably is something :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14855 a95241bf-73f2-0310-859d-f6bbb57e9c96
* removing a font family or style now always goes through the font manager.
* removed FreeType "cache" remains (it wasn't used, anyway, and won't be used
by us).
* renamed SharedObject to ReferenceCounting as that's what it does.
* the default fonts weren't deleted on shutdown.
* added temporary work-around for waiting until a newly created entry is complete
(just waits a moment...) - this will be fixed once Haiku supports this in a
better way.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14833 a95241bf-73f2-0310-859d-f6bbb57e9c96
* both, BinaryInsert() and BinaryInsertUnique() now propagate the result of
the AddItem() call - which could fail because of low memory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14825 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the node monitor is now working - fonts can only be added yet, though
* deleting a FontFamily did not work before, as the last style to be
removed tried to delete the family again.
* "luckily", FontFamilies and FontStyles were not deleted at all before.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14824 a95241bf-73f2-0310-859d-f6bbb57e9c96
construction.
* ServerFont::SetStyle() now adopts the style's face and direction, too.
* Started a more sane handling of ServerFont::SetFace() (at least there's
a to-do comment :-)).
* Minor cleanup (GetStyle() -> Style(), GetFamily() -> Family(),
GetPath() -> Path()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14809 a95241bf-73f2-0310-859d-f6bbb57e9c96
in the DesktopSettings as defaults, too (but can be changed there).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14804 a95241bf-73f2-0310-859d-f6bbb57e9c96
the default fonts of the app_server.
Moved some font command implementations around to group them a bit better.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14800 a95241bf-73f2-0310-859d-f6bbb57e9c96
length, not the length of the string.
Introduced a maximal string length that may be sent at once.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14799 a95241bf-73f2-0310-859d-f6bbb57e9c96
updates.
* Optimized retrieving the font list from the server.
* This greatly simplifies the app_server communication for getting the font
list as well - there are now only 2 commands instead of 6.
* Moved extra font flags creation from ServerApp to FontStyle::Flags().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14751 a95241bf-73f2-0310-859d-f6bbb57e9c96
Library names are now mapped for all targets but "host" (not only for
"haiku") -- added one more level of indirection to achieve that.
(TARGET_LIBRARY_NAME_MAP -> *_LIBRARY_NAME_MAP_*).
* Renamed build/HaikuBuildCompatibility.h to BeOSBuildCompatibility.h
(auto-included when compiling something that uses the Be API for platform
"host" on anon-BeOS platform), and introduced build/HaikuBuildCompatibility.h,
which can be included when compiling something that can be built for both,
Haiku and BeOS compatible platforms.
* Introduced libhaikucompat.a, a library that adds a few functions existing
under Haiku, but not under BeOS.
* New rule AddSubDirSupportedPlatforms.
* Renamed libopenbeos.so to libbe_haiku.so.
* Introduced new target platform "libbe_test", which is basically equivalent
to a BeOS compatible host platform target, with the exception, that instead
of the host platform's libbe.so a special build of Haiku's libbe.so
(libbe_haiku.so (formerly known as libopenbeos.so)) is used. Furthermore
Haiku's public app, interface, storage, and support kit headers are used
when compiling. This replaces the less nice way in which the test app server
and applications for this test environment were built.
When building for platform "libbe_test", the library name "be" is
autotranslated to "libbe_haiku.so". Thus most applications don't need
special fiddling when them building them for the app server test environment;
usually an "AddSubDirSupportedPlatforms libbe_test ;" will suffice.
* Reduced the dependencies of <syscalls.h> and fixed problems caused by this
(e.g. source files not including the needed headers directly).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14749 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Simplified server communication a bit: instead of separate queries for font
direction, "is fixed", ... there is now a private extra flags field that is
filled on demand.
* The server command names now describe what the command does, and are not simply
named after the BFont method (AS_SET_FAMILY_AND_STYLE vs. AS_GET_FAMILY_AND_STYLE_IDS).
* Replaced B_SET_SYSFONT_{PLAIN|BOLD|FIXED} with a single B_GET_SYSTEM_FONTS.
* Rewrote Font.h and added our license.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14741 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Painter implements DrawShape for stroking and filling BShape data
* Painter uses clipping to avoid problems with huge coordinates, the R5 app_server can be crashed by this.
-> this should be added to more places as well like text rendering
* DrawingEngine uses the Painter to draw BShape data
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14735 a95241bf-73f2-0310-859d-f6bbb57e9c96
will speed up launching the app_server considerably (once it's done).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14720 a95241bf-73f2-0310-859d-f6bbb57e9c96
Axel Dörfler