for finding this. This should fix bug #1734.
* Removed unused BWindow members and the temporary PrintToStream() method.
* Indentation cleanup (DirectWindow.h had some spaces instead of tabs).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23863 a95241bf-73f2-0310-859d-f6bbb57e9c96
When specified it desigantes that the interrupt handler should not lock the
vector with a spinlock when executing the installed interrupt handlers. This
is necessary to allow the same interrupt vector to be handled in parallel on
different CPUs. And it is required for the CPU halt to work synchronously when
there is more than one AP CPU. Though the acquire_spinlock() should cause IPIs
to be processed, only this fixed the SMP_MSG_FLAG_SYNC problem for me.
Not locking is safe as long as it is guaranteed that no interrupt handler is
registered or removed while the interrupt handler is running. We can guarantee
this for the SMP interrupt handlers we install in arch_smp_init() as they are
never uninstalled. Probably this flag should be made private though.
Restored the SMP_MSG_FLAG_SYNC when entering the kernel debugger.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23838 a95241bf-73f2-0310-859d-f6bbb57e9c96
(I guess frenchies are guilty here, as mmu_man's ThemeAddOn have the same disease...)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23757 a95241bf-73f2-0310-859d-f6bbb57e9c96
work on haiku... let's start reverting some headers changes I did,
although these don't look harmful.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23729 a95241bf-73f2-0310-859d-f6bbb57e9c96
move it to its own file, but it's not implemented yet... we'll see.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23717 a95241bf-73f2-0310-859d-f6bbb57e9c96
is recorded in a kernel trace entry (if tracing is enabled).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23686 a95241bf-73f2-0310-859d-f6bbb57e9c96
Implemented palette mode and fixed bugs listed at ticket #1701. Thanks
for your work!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23671 a95241bf-73f2-0310-859d-f6bbb57e9c96
blocks into the new transaction, but it would set that transaction on all
blocks of the old transaction, too. Also, it did not correctly update the
num_blocks/sub_num_blocks fields of the old transaction. Even worse, it did
return B_OK instead of the ID of the new transaction...
* get_writable_cached_block() did not correctly maintain the number of blocks
in the sub transaction.
* write_cached_block() did not free the original_data of a block when it wrote
it back as part of a previous transaction.
* Changed "cookie" for cache_next_block_in_transaction() to "long", so it will
be 64 bits when needed.
* Improved the API for detaching sub transactions: you can now get the blocks
of only the main (parent) transaction as well, added new
cache_block_in_main_transaction() function.
* BFS now flushes the log when there is no space left for the current
transaction.
* _WriteTransactionToLog() allocated a "vecs" array, but never freed it.
* _WriteTransactionToLog() now also supports detaching the current sub
transaction if the whole thing is getting too large (it will now also panic
if that doesn't work out).
* Removed a useless optimization: making the blocks available in the cache
isn't really needed, as all blocks in a transaction are locked into the
cache, anyway.
* Implemented Transaction::WriteBlocks().
* Minor cleanup, removed some dead code, fixed warnings in the fs_shell's
block_cache when compiled with debug output on.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23610 a95241bf-73f2-0310-859d-f6bbb57e9c96
(suggested by stippi). The movement threshold will be subject to
changes, as I only tested on vmware and it's probably too high.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23528 a95241bf-73f2-0310-859d-f6bbb57e9c96
transaction ends or has been aborted.
* BFS now listens for transactions when it created an inode to see if
the transaction will be aborted without freeing the inode (in which
case it will panic for now).
* Started implementing tracing support, but it's not working yet.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23492 a95241bf-73f2-0310-859d-f6bbb57e9c96
which already existed in the region backend ported from XOrg
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23394 a95241bf-73f2-0310-859d-f6bbb57e9c96
Moved GetMouse() calls near the check for exit conditions.
Reorganized a bit the code, and hopefully simplified it in some places.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23229 a95241bf-73f2-0310-859d-f6bbb57e9c96
_LoadDefaultSettings() if no settings were loaded already, in order to
return valid values. Renamed private methods to fit our guidelines.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23204 a95241bf-73f2-0310-859d-f6bbb57e9c96
* improved naming of some private BView functions and used our underscore
prefix
* added a _DrawAfterChildren method to BView which does the necessary setup
and calls the DrawAfterChildren hook
* call the new _DrawAfterChildren method in the BWindow implementation, this
was easy since the view tokens are already hierachically sorted
* implement support for B_DRAW_ON_CHILDREN in the app_server's ViewLayer, it
simply means that children are ignored for the views clipping region, any
drawing methods will paint over children (therefor the B_DRAW_ON_CHILDREN
flag is even properly named)
With these changes, support for B_DRAW_ON_CHILDREN and the DrawAfterChildren()
hook are implemented and behave exactly as on R5 as far as I can tell, also
for the view background painting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23154 a95241bf-73f2-0310-859d-f6bbb57e9c96
the complete extent info or not.
* file_map_translate() now cuts down the request to the file bounds.
* Adjusted BFS and FAT to the API changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22913 a95241bf-73f2-0310-859d-f6bbb57e9c96
that can be used by file systems.
* Changed the way the file cache works: instead of reading/writing to the
underlying device directly, it can now be used for any data source, ie.
also network file systems.
* As a result, the former pages_io() moved to the VFS layer, and can now be
called by a file system via {read|write}_file_io_vec_pages() (naming
suggestions are always welcomed :-)). It now gets an FD, and uses that to
communicate with the device (via its fs_{read|write}_pages() hooks).
* The file_cache_{read|write}() functions must now be called without holding
an I/O relevant file system lock. That allows the file cache to prepare the
pages without colliding with the page writer, IOW the "mayBlock" flag can
go into the attic again (yay!).
* This also results in a much better performance when the system does I/O and
is low on memory, as the page writer can now finally write back some pages,
and that even without maxing out the CPU :)
* The API changes put slightly more burden on the fs_{read|write}_pages()
hooks, but in combination with the file_map it's still pretty straight
forward. It just will have to dispatch the call to the underlying device
directly, usually it will just call its fs_{read|write}_pages() hooks
via the above mentioned calls.
* Ported BFS and FAT to the new API, the latter has not been tested, though.
* Also ported the API changes to the fs_shell. I also completely removed its
file cache level page handling - the downside is that device access is no
longer cached (ie. depends on the host OS now), the upside is that the code
is greatly simplified.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22886 a95241bf-73f2-0310-859d-f6bbb57e9c96
think it wasn't a really good idea. The alignment of shortcut
charachters and submenu symbols could use some more work, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22849 a95241bf-73f2-0310-859d-f6bbb57e9c96
Mac is there already (TODO: rename some stuff from apple to mac).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22770 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added missing job classes (they don't do anything yet, though) and
completed the implementation of the job generator.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22767 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rewrote TextView.h
* Renamed all private methods to have the underscore prefix.
And also:
* Whitespace and line width cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22688 a95241bf-73f2-0310-859d-f6bbb57e9c96
This should help to reduce the number of warnings imported code will throw
during compilation (helps a lot with tcpdump, for example).
* Since long is 64 bit on 64 bit platforms, we might want to think about doing
that change for the Haiku types int32 and uint32 as well.
* Fixed several occurences of hidden type problems.
* Fixed build of the stack and TCP under BeOS.
* Fixed incorrect typedef in socket_interface.h.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22643 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed Background.h - to be replaced by the one in be_apps (which has OT license)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22579 a95241bf-73f2-0310-859d-f6bbb57e9c96
accelerant (or the app_server via EDID info). It's still experimental
API, and opinions are welcome.
* Moved BPrivateScreen into the BPrivate namespace.
* Rewrote Screen.h.
* Introduced a BScreen::GetMonitorInfo() method, and implemented it in the
app server as well (ie. AS_GET_MONITOR_INFO).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22563 a95241bf-73f2-0310-859d-f6bbb57e9c96
the accelerant, as well as its EDID info. B_GET_PREFERRED_DISPLAY_MODE and
B_GET_EDID_INFO are both optional. The preferred mode will be taken from the
EDID info if only the latter hook is implemented, or the former returned an
error.
* Currently, the app_server should correctly set the preferred mode on start,
but no accelerant supports that yet, so it's not really tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22520 a95241bf-73f2-0310-859d-f6bbb57e9c96
hence CancelInputMethod()), but it implements part of it. To avoid code
duplication, I added a private _SetRunArray() call, which does most of
the work, except cancelling the input method, and calling Refresh().
Removed some unneeded code from CancelInputMethod(), some small changes
in HandleInputMethodChanged.
-Questa linea, e quelle sotto di essa, saranno ignorate--
M src/kits/interface/TextView.cpp
M headers/os/interface/TextView.h
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22489 a95241bf-73f2-0310-859d-f6bbb57e9c96
additional partition_data* child parameter now.
* _user_get_partitionable_spaces() doesn't need to copy the buffer into
the kernel, since it is no input parameter. It also copies back the
actual partitionable spaces count on error, now -- B_BUFFER_OVERFLOW
is returned when the buffer was too small, but then the count must be
returned too.
* Fixed several instances of syscall implementations that unloaded a disk
system, although they didn't load it in the first place. This screwed
up the load count with undesirable consequences.
* _user_create_child_partition() would set the size to the supplied
offset.
* Fixed broken loop in KPhysicalPartition::CreateShadowPartition().
* KPartition::RemoveChild() notified the listeners about the wrong
event.
* Intel partitioning module:
- The *_get_partitionable_spaces() correctly return B_BUFFER_OVERFLOW
now, if the supplied buffer is too small.
- Implemented a part of pm_shadow_changed(), which creates and updates
the PartitionMap, so that the validate_*() hooks have a chance to
work at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22475 a95241bf-73f2-0310-859d-f6bbb57e9c96
physical partition, unlike get_partition() which returns the shadow
partition, if it exists.
* Added B_PARTITION_SHADOW[_CHILD] partition pseudo operation values for
the shadow_changed() hook, notifying a disk system, that a shadow
partition has been created.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22472 a95241bf-73f2-0310-859d-f6bbb57e9c96
system initialize() hooks. It's often the only info about the
partition one needs and thus locking the partition just to get it is
no longer necessary.
* intel partitioning system:
- Removed passing around block sizes. We require 512 byte sectors
anyway. In fact using the parent partition's block size was even
wrong.
- Simplified writing the partition map sector.
- Simplified and corrected the partition map initialization.
- We don't fail identifying a partition anymore, if the partition map
contains no partitions. We would never identify a freshly
initialized partition map before.
- Made pm_identify() more intelligent: It determines the priority to
return depending on whether the partition is the device itself and
whether we have recognized child partitions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22447 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the page writer don't allow to block, while all other writers do. This fixes
bug #1509. The reason the page writer needs this is because it marks several
pages from different caches as busy.
* Fixed a warning about ASSERT being defined already in BFS, since
util/DoublyLinkedList.h now includes debug.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22434 a95241bf-73f2-0310-859d-f6bbb57e9c96
vfs_select.h, respectively moved most of it into the new kernel
private header wait_for_objects.h.
* Added new experimental API functions wait_for_objects[_etc](). They
work pretty much like poll(), but also for semaphores, ports, and
threads.
* Removed the "ref" parameter from notify_select_events() and the
select_sync_pool functions as well as from fd_ops::fd_[de]select(). It
is no longer needed. The FS interface select() hook still has it,
though -- the VFS will always pass 0.
* de]select_fd() take a select_info* instead of a select_sync* + ref
pair, now. Added respective functions for semaphores, ports, and
threads.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22416 a95241bf-73f2-0310-859d-f6bbb57e9c96
characters first, and then falls back to take everything. fTrigger is now
uint32 and works with all unicode characters; unlike in BeOS, the
MenuTriggerTest application now works correctly in Haiku.
* fTriggerIndex is now a character position, not a byte position of the label;
this allows BMenuItem::DrawContent() to draw the trigger at the correct
position, even if there are multi-byte UTF-8 characters.
* The above fixed bug #1506; triggers are still not working, though.
* Rewrote Menu.h header.
* Renamed all private methods (that are not called by BWindow) to have the
underscore prefix.
* Removed unused methods.
* Some minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22384 a95241bf-73f2-0310-859d-f6bbb57e9c96
If a Tab is partially out of the window, clicking on it to make it the
active tab will scroll it to be completely visible.
The best solution would probably be having a way to scroll through the
whole list of tabs, or something like this. But for now, at least, makes
the tabbed terminal a bit more useful.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22325 a95241bf-73f2-0310-859d-f6bbb57e9c96
text view, ignore the divider for this (application code could layout
the textview itself, and fDivider might not be maintained)
* change Draw() and TextInput::MakeFocus() accordingly
this fixes the weird placement of text controls in Beam
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22134 a95241bf-73f2-0310-859d-f6bbb57e9c96
content name are supported.
* Added file_system_module_info::flags (analogously to
partition_module_info::flags) which indicate which disk device
features the FS supports.
* Replaced the
file_system_module_info/partition_module_info::supports_*()
hooks by a get_supported_operations() hook and for partitioning
systems additionally a get_supported_child_operations() hook.
* Updated file and partitioning systems accordingly.
* Updated fs_shell accordingly.
* Updated the DDM accordingly. The syscall interface remains unchanged,
though.
* _user_supports_initializing_partition() also checks whether the parent
partitioning system is content now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22043 a95241bf-73f2-0310-859d-f6bbb57e9c96
but not for SetMouseEventMask(). We now track the value of that mask in a dedicated
member variable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22022 a95241bf-73f2-0310-859d-f6bbb57e9c96
* handle out of memory situations
* don't try to copy (and assign op!) in SetData if opCount/ptCount is 0
-> FontDemo doesn't crash anymore eventually when cycling fonts in outline
mode
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22000 a95241bf-73f2-0310-859d-f6bbb57e9c96
as Marcus pointed out, having it outside wasn't thread safe. Moved
PicturePlayer into the BPrivate namespace.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21982 a95241bf-73f2-0310-859d-f6bbb57e9c96
sense. Instead, we now lock its app_server connection only. The deadlock as exposed
by starting Icon-O-Matic twice is now gone, at last.
* Fixed the TODO added by Ingo in r21953: moved the thread/handler renaming code in a
dedicated method _SetName() which is now called from _InitData() and SetTitle(); the
"w>" is no longer lost.
* Unlike the BeBook states, BMessageQueue::RemoveMessage() is indeed not supposed to
delete the message it removes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21959 a95241bf-73f2-0310-859d-f6bbb57e9c96
BView implementation (client side)
* introduced some private methods for _Convert*(BPoint*) methods which avoid
doing the check_lock() thing in the recursion, also Origin() would likely
have communicated with the app_server all the time, since the origin bit
was needlessly invalidated, so some speedup should be achieved
* this should fix ticket #98
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21900 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the previous AGG implementation is superfluous
* the new implementation is based on that one, but in a way that allows
read/write locking to the list of cache entries (fonts) as well as
read/write locking to the cached glyphs per individual font cache entry
* new GlyphLayoutEngine.h, which is to be the central place for layouting
glyphs along the baseline.
It handles the locking for getting the font cache entries.
It works by giving it a template class GlyphConsumer which does the
actual work.
* changed AGGTextRenderer to use the new font cache
* changed ServerFont::StringWidth(), and the bounding box stuff to use it
* changed DrawingEngine, it doesn't need the global font lock anymore
* our BFont thought that GetBoundingBoxesAsGlyphs and GetBoundingBoxesAsString
is the same, which of course it isn't, hence the two separate functions...
AsGlyphs just gets the bounding box of each glyph in a string, not treating
the string as an actual word
AsString adds the offset of the glyph in the word to the bounding box
* changed ServerProtocol.h accordingly for the different bounding box meaning
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21797 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adjusted the FS initialize() hook to have FD and partition_id
parameters like the other hooks instead of the partition path.
* Adjusted initialization in BFS accordingly.
* Implemented the FS initialization method in KFileSystem.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21788 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Simplified the notification framework: removed the updater stuff completely;
it was only there to account for some peculiarities of the node monitor which
we now solved differently.
* NotificationListener no longer includes a doubly linked list link for convenience;
it might want to listen to more than just one service.
* NotificationService cannot have an abstract destructor.
* Changed the _user_stop_watching() syscall to mirror the Be API; ie. it's no
longer possible to just remove some flags separately, just to stop listening
completely.
* Adapted the node monitor implementation to live in the NodeMonitorService class
that uses the new notification framework.
* Removed the public kernel node monitor API - it wasn't useful that way since you
couldn't do a lot with the KMessage in the kernel without using a private API.
Now you will have to use the (private) notification manager to use the node monitor
from inside the kernel. At a later point, we might introduce a public API for that,
too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21780 a95241bf-73f2-0310-859d-f6bbb57e9c96
possible exception thrown from the constructor called by the function
itself, for safety.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21750 a95241bf-73f2-0310-859d-f6bbb57e9c96
Make our DPC named differently to avoid this confusion.
Detected while testing our ACPI (which needs our DPC) under
R5...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21703 a95241bf-73f2-0310-859d-f6bbb57e9c96
I "ported" the region implementation from XOrg to work on BRegion data.
This resulted in pretty much the same code structure as before, with
RegionSupport.cpp containing the messy details. Only now it _is_ really messy
from a code beauty point of view. I didn't exactly feel like cleaning it
up right now... but I guess I will have to.
So what does this mean - our BRegion implementation was very slow (no offense!),
and on top of that it scaled very badly with more and more rects. The new
implementation seems to be on par with the very fast R5 implementation and
the data looks exactly the same too. BRegion is very performance critical
for the app_server, and I cannot wait to try this on my slow computer...
Some changes are noteworthy: The right and bottom coordinates of
BRegion internal data are now exclusive! I inherited that from the
XOrg implementation and didn't feel like changing the code, seeing it
is probably tested quite well. The conversion is handled transparently.
Secondly, constructing a BRegion with just one rect is not invoking
malloc anymore for the member data, this makes it much more efficient
to use temporary BRegions with just one rect, both externally and internally
in the BRegion implementation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21665 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed storage/Alias.h as that stuff isn't even available on BeOS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21576 a95241bf-73f2-0310-859d-f6bbb57e9c96
BDirectory without declaring it first. Since that's an actual bug, I made the
changes in the Haiku headers, and copied them back to the build headers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21562 a95241bf-73f2-0310-859d-f6bbb57e9c96
* _WindowAt() and _CountWindows() now have an individual version of that
code which should be magnitudes faster.
* _WindowQuitLoop() no longer handles hidden windows specially - instead,
it now walks the window list in the correct direction which should fix
the issues.
* Also, it now uses WindowAt() and thus has an up-to-date view of the
window list (it will no longer ignore new windows).
* And finally, it will no longer dereference an unsafe pointer (for
BWindow::IsFilePanel()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21505 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reworked the internal layout. _ValidateLayoutData() computes and caches the
layout related data and all other methods just use those values. Now, in
layout-aware mode the class should properly work not only when using the
layout items. And when using layout items, the class does actually do
internal layout; it was basically good luck that it worked in the tests,
before. Vertical resizing is supported, too.
* We do a few mean tricks to get the probably mostly preferred layout behavior:
By default our own explicit max width and that of the menu bar layout item is
set to unlimited and the horizontal menu bar alignment to left aligned. This
allows to horizontally resize a BMenuField beyond its preferred size,
although both label and menu bar have a limited max width. The user can, of
course, override those explicit sizes/alignments to get a different behavior,
if desired.
* Fixed invalidation in SetDivider(). When having the focus, the left and top
border of the blue frame were not invalidated.
* The label is no longer drawn at vertical position font ascent + descent
+ leading + 2 (not sure how this calculation was supposed to work), but
vertically centers the label around the ascent. With big fonts the label is
shown a bit too far to the bottom. Not sure how to fix this in a generic way.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21466 a95241bf-73f2-0310-859d-f6bbb57e9c96
stupid errors, since I don't use exceptions usually. Feel free to beat
me on this. Moved uninitialization to _DisposeData(). Corrected some
styling issues pointed out by axel. Used fprintf instead of printf.
Turned off debugging.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21450 a95241bf-73f2-0310-859d-f6bbb57e9c96
DoLayout()).
* Don't resize the view and the window anymore, when fResizeToFit is not
set.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21426 a95241bf-73f2-0310-859d-f6bbb57e9c96
discussed in the thread in haiku-development. I added a fSubmenus member
to BMenu, to be able to tell from BMenuItem if there are other items
with a submenu (maintained in BMenuItem::SetSuper()). If you don't like
this solution, let's just revert.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21395 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Menus are generally a bit wider (BeIDE ones didn't look nice)
- The modifiers bitmap are drawn more centered vertically
- Splitted BMenu::ComputeLayout() into three methods
- Various minor changes.
The menuitems still don't look nice with bigger font sizes, but we'll
try to fix this...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21394 a95241bf-73f2-0310-859d-f6bbb57e9c96
only invokes the BView version. Didn't know what to do with MinSize() and
PreferredSize(). ATM they return fixed, hard-coded values. It might make
sense to compute something depending on the font size, for instance.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21380 a95241bf-73f2-0310-859d-f6bbb57e9c96
and DoLayout(). When the B_SUPPORTS_LAYOUT view flag is set (as is by
default when using one of the new constructors) the BBox completely manages
one true child (the first child that is not the label view).
* Centralized the layout related computation in new method
_ValidateLayoutData(). The computed infos are cached in a new private
LayoutData structure.
* GetPreferredSize() was broken in several respects. It does now return the
same result as PreferredSize(). If B_SUPPORTS_LAYOUT is not set, these are
the sums of the insets induces by the frame and the label. I.e. those values
can for instance be added to the child's preferred size to compute the
preferred size of the compound.
Not sure, if the Haiku-only TopBorderOffset() and InnerFrame() functions still
make sense. With layout management they're actually superfluous.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21356 a95241bf-73f2-0310-859d-f6bbb57e9c96
disjunction of all view flags before, and the new layout related flags were
missing. I suppose there was not striking reason for previous method.
* Made InvalidateLayout() virtual. When implementing layout management
directly in a derived class instead of a separate BLayout, one needs to
override it to know when to discard cashed layout infos.
* Added a ResizeTo(BSize) method.
* Avoided ugly multi-line strings in PrintToStream().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21355 a95241bf-73f2-0310-859d-f6bbb57e9c96
max, preferred) size triple so that they are compatible with each other.
* Implemented AlignInFrame(BView*, BRect).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21353 a95241bf-73f2-0310-859d-f6bbb57e9c96
* scsi_cmds.h declared several variables instead of naming enums.
* the CD-ROM standard retrieval was broken (always checked index 0).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21105 a95241bf-73f2-0310-859d-f6bbb57e9c96
part of the view, you can add a BRect "be:area" to that message - very handy.
* Cleaned up AppDefs.h a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20683 a95241bf-73f2-0310-859d-f6bbb57e9c96
{set,clear}_debugger_{break,watch}point(), allowing to set/clear break
and watchpoints for the calling team. When a break/watchpoint is hit,
the team enters the debugger. Handy in situations when the program in
question can't really be started in a debugger (or it would be
complicated to do so). The functions work only as long as no debugger is
installed for the team.
We clear the arch specific team and thread debug infos now, when a new
debugger is installed, thus clearing break- and watchpoints.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20396 a95241bf-73f2-0310-859d-f6bbb57e9c96
with gcc 4. Fixed resulting build errors (gcc is more lenient for
headers in -isystem directories).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20386 a95241bf-73f2-0310-859d-f6bbb57e9c96
add-ons accordingly and removed the syscall.
* Removed send_notification().
* Reimplemented notify_listener(). It used the unimplemented
send_notification(). Now it has a chance to work. Note that
notify_listener() is obsolete. I would already have removed it, if
there weren't lots of FS implementations still using it (Hint!).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20329 a95241bf-73f2-0310-859d-f6bbb57e9c96
Removed most data allocations/copying from PicturePlayer, ServerPicture now has to do this when converting coordinates.
Added additional functions to ViewLayer to copy&convert multiple BPoint, BRect, BRegion to Screen coordinates, those should be further optimized.
Removed some function call overhead.
Note: some functions of PicturePlayer don't appear to be implented by PictureDataWriter,
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20292 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed a few parameters of the FS module hooks:
- *file in the attribute functions to *vnode
- v to vnode
- I could barely restrain myself from renaming the "_*" parameters. I
understand this marks return parameters, but I'd prefer a nicer prefix
or suffix (that doesn't makes you think this is a private/internal
identifier) like "out", "ret", "return", "result", or something similar.
I'd also like to propose renaming {read,write}_link() to
{read,write}_symlink(). Er, and do we need write_link() at all?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20226 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes bug #242. The value is currently stored in a separate file.
* Removed some unused codes from ServerProtocol.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20188 a95241bf-73f2-0310-859d-f6bbb57e9c96
The first use is to let the kernel decide what the preferred syscall mechanism is at boot time and copy the
appropriate user space code there. Can be used for routines the kernel can decide best how to use (memcpy, some
timing routines, etc).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20161 a95241bf-73f2-0310-859d-f6bbb57e9c96
the new cpuid stuff was apparently exacerbating an existing problem where various bits of low level
cpu code (specifically get_current_cpu) weren't really initialized before being used. Changed the
order to set up a fake set of threads to point each cpu at really early in boot to make sure that at
all points in code it can get the current 'thread' and thus the current cpu.
A probably better solution would be to have dr3 point to the current cpu which would then point to the
current thread, but that has a race condition that would require an int disable, etc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20160 a95241bf-73f2-0310-859d-f6bbb57e9c96
updated the mesa software addon to work again (maybe would need more work)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20137 a95241bf-73f2-0310-859d-f6bbb57e9c96
* replaced new[] with malloc()/realloc() where appropriate - since we're messing with
the bits anyway, this makes the code slightly faster.
* however, we might want to throw some std::bad_alloc exceptions to deal correctly with
low memory situations.
* cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20065 a95241bf-73f2-0310-859d-f6bbb57e9c96
this fixes bug #1005. As a result, the Disks icon will now appear in file panels
when you change that setting with a panel open.
* _ObserverList is now in the BPrivate namespace (and renamed to ObserverList).
* its BHandler map is now only temporarily used for handlers that do not belong to
a looper yet; when BHandler::SendNotices() is called, they will be transferred
into the BMessenger map.
* Invalid messengers are now removed from the map when encountered.
* Added TODO comments about a possible reference counting if a handler is added
twice to a list (right now, this will be ignored).
* All {Start|Stop}Watching() methods are now more or less safe to be used in low
memory situations (adding some items to the map can still throw an exception...).
* Renamed BHandler::InitData() to _InitData().
* Some refactoring and cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20029 a95241bf-73f2-0310-859d-f6bbb57e9c96
C style ones, as this is a C header, too (and a very basic one).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19984 a95241bf-73f2-0310-859d-f6bbb57e9c96
feel free to change that ;-)
* Cleaned up existing headers.
* Coding style guide update to BBufferIO (renamed m_* members to f*).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19972 a95241bf-73f2-0310-859d-f6bbb57e9c96
with PostMessage() in case the message queue is full.
Some notes:
* for synchronous replies, we don't use this mechanism yet, but it could be
extended to do that as well.
* the code looks so complicated because we need a way to access the looper's
queue without locking it (to prevent deadlocks); like Dano's solution, I've
abused BTokenSpace to store a BDirectMessageTarget with a BHandler.
* we also need to decouple the lifetime of a looper's queue from its target,
as we cannot lock the looper, and therefore, can't guarantee it stays valid
as long as we're accessing it outside of BLooper.
* init_clipboard() now needs to be done after the global constructors have
been called - since sending messages now needs gDefaultTokens to be initialized.
Since this is done per image, it shouldn't cause any troubles, though.
* some minor cleanup, removed unused _msg_cache_cleanup_() and friends.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19968 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Got rid of unused BLooper members
* renamed fTaskID to fThread
* Removed private and deprecated AddLooper()/RemoveLooper()/... stuff; BLooper is now
directly calling BLooperList methods.
* Got rid of extensive and useless comments
* Made a few TODOs more clear
* Merged InitData() and InitData(...) to _InitData(...)
* BLooper::Team() now uses BPrivate::current_team(), sTeamID is gone now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19966 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BLooper::AddMessage() is now using this method to determine wether or not to
update its looper thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19956 a95241bf-73f2-0310-859d-f6bbb57e9c96
Some files renamed. Won't build yet with our usb_raw driver due to different namings. classes need to be B-prefixed anyway. USBKit.h needs to be split like in zeta as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19901 a95241bf-73f2-0310-859d-f6bbb57e9c96
Switcher now works as expected.
* Renamed TRoster::ActivateApp() to UpdateActiveApp(), as the app is already activated
at that point (the registrar only keeps track of it).
* BWindow::DispatchMessage() now calls the new BRoster::Private::UpdateActiveApp()
method when it receives a B_WINDOW_ACTIVATED message.
* Added BRoster::_UpdateActiveApp() which calls the new B_REG_UPDATE_ACTIVE_APP.
* Removed now unused B_REG_ACTIVATE_APP.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19857 a95241bf-73f2-0310-859d-f6bbb57e9c96
did for yellowTAB GmbH when I worked for then and is being used under permission.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19840 a95241bf-73f2-0310-859d-f6bbb57e9c96
Pending DPCs at queue death time are now called too, to avoid possible leaks.
Meanwhile, queue_dpc() will refuse to add another DPC and returns B_CANCELLED.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19798 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fixed most obvious issues, as reported by Marcus and Axel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19765 a95241bf-73f2-0310-859d-f6bbb57e9c96
* _ContrainPoint() was broken as it could never change the point it was supposed
to contrain.
* MouseDown() no longer sends a notification message automatically (only if it
changed something)
* MouseMoved() and synchronous MouseDown() will now only send modification messages
if something actually changed (not for every mouse update).
* After key presses, the invokation message is only sent when the value changed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19697 a95241bf-73f2-0310-859d-f6bbb57e9c96
auto scrolling to its own method, introduced a new private
StyledWidthUTF8Safe method.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19694 a95241bf-73f2-0310-859d-f6bbb57e9c96
of BFont. You can BFont::SetFalseBoldWidth(float) a width on a
BFont object, and it will cause the glyph shapes to be run through
an AGG "contour converter" so that they become thicker or thinner.
IIRC, this is commonly referred to as "false bold". The "width" value
is the distance in pixels that the new glyph outline will be offset
from the original outline.
It would be nice if someone could look at my change to View.h with
regards to the B_FONT_ALL flag.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19547 a95241bf-73f2-0310-859d-f6bbb57e9c96
me for the absolutely UGLY names. Also, if someone can suggest better
ones...
I seem not to have introduced any new bug.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19476 a95241bf-73f2-0310-859d-f6bbb57e9c96
Hardware GLRenderers will surely needs to check which screen device (so which window)
a GLView beg him to render to as fast as possible.
Unless such hardware is not serving this screen...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19464 a95241bf-73f2-0310-859d-f6bbb57e9c96
commented the insertion of the attribute name in patterns in the case of a string attribute
notify_probe_by_file chooses a module based on a bus specific suffix
dm_register_child_device has a parameter to optionally check the support for the node
added scanning of bus devices after the boot filesystem is mounted
fixed dm_rescan, locking was misbehaving
fixed SYSTEM_DRIVER_REGISTRATION definition
added B_DRIVER_MAPPING attributes for PCI and ACPI devices:
%vendor%_%device% for PCI, hid_%hid% and type_%type% for ACPI
moved acpi_device_module_info definition to public ACPI.h
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19394 a95241bf-73f2-0310-859d-f6bbb57e9c96
added a new style module to publish acpi devices ("listdev -d" to list them)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19322 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added BBitmap(const BBitmap&, uint32 flags) constructor as found in Dano/Zeta.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19270 a95241bf-73f2-0310-859d-f6bbb57e9c96
It's hopefully now used everywhere instead of B_RAW_TYPE where appropriate.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19219 a95241bf-73f2-0310-859d-f6bbb57e9c96
This means that the usb_callback_func now takes a status_t instead of a uint32 status.
Also the error codes are now different. I don't see this as a real problem in binary compatibility, as the status codes were never really documented and most drivers just assumed that a nonzero status meant an error.
Source compatibility breaks for callback functions and error defines. I fixed (hopefully) all places in the tree that are currenty included in the image and affected by the change.
* Corrected error reporting in UHCI and EHCI using the new status codes.
* Fixed a memory leak in EHCI where the async advance interrupt was not triggered in time.
* Fixed another race condition in usb_raw that could cause a crash when a device is removed while a transfer is pending.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18916 a95241bf-73f2-0310-859d-f6bbb57e9c96
This improves abstraction and allows bus drivers that are independant of ide_adapter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18794 a95241bf-73f2-0310-859d-f6bbb57e9c96
not yet working but a bit better :
GLTeapot display is now white instead of black :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18776 a95241bf-73f2-0310-859d-f6bbb57e9c96
in several steps:
1. early pre-registration with the registrar ("I wanna launch the
app, make sure noone interferes.")
2. load the app image
3. finish pre-registration with the registrar ("I have launched
the app, here is its team ID.")
4. start app main thread
5. send "on launch" messages to the app (argv, refs, others)
If the app is already running or being launched, 1. fails with a
conclusive error code and returns the team ID and the pre-registration
token of the app. Steps 2 - 4 are skipped and only the messages are
delivered using the team ID returned by 1.
This change fixes a race condition: The failed early pre-registration
request obviously cannot return the team ID, if the other thread
launching the app has not finished step 3 yet. Thus the argv/refs
message would not get delivered and Launch() would not return the
correct team ID.
Now we wait for the pre-registration to be finished in this case, using
the former _IsAppPreRegistered() mechanism, which already provided
such a waiting feature for one request. It has been extended to
accomodate an arbitrary number of waiting requests and renamed to
_IsAppRegistered().
This fixed bug #763.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18728 a95241bf-73f2-0310-859d-f6bbb57e9c96
parameter during construction).
* Doing so will now result in a kernel panic whenever your file system tries to
write to a block.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18719 a95241bf-73f2-0310-859d-f6bbb57e9c96
* additional versions of SetIcon[ForType] and GetIcon[ForType] in BMimeType
and BAppFileInfo, which handle flat vector icon data
* changes in Tracker to support scalable icons (currently broken for
non-vector icons and needs cleanup) and drawing icons correctly with alpha
channel (large parts of this work done by Michael Lotz)
If someone feels like looking over the changes, that would be much
appreciated! :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18699 a95241bf-73f2-0310-859d-f6bbb57e9c96
at the comment in r5_compatibility.h.
* Intentionally broke source compatibility and removed all that outdated Nettle stuff.
* Also, I took the liberty of making m_init private and rename it to fInit - again, this
will only affect source compatibility.
* Rewrote NetEndpoint.h
* Fixed quite a few small bugs around the code that I touched, for example in NetAddress,
SetTo() never set fInit, and therefore could be wrong.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18680 a95241bf-73f2-0310-859d-f6bbb57e9c96
ie. if someone included net/socket.h he's doomed to change his sources).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18679 a95241bf-73f2-0310-859d-f6bbb57e9c96
private BWindow::_StealMouseMessage() which makes sure only messages for the
preferred handler are stolen, and also, that nothing gets lost that shouldn't
get lost.
Also updates the fLastMouseMoved view in case the message is actually removed
due to GetMouse().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18601 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rewrote both headers on the way.
* The usb module now exports both, the v2 and v3 module_info.
* Changed the internals of the USB Stack to give out usb_ids instead of opaque handles to internal classes.
* Cleaned up some more of the Stack by moving members into other classes and removing unused stuff.
* Updated the usb_raw driver from v2 to v3 API.
Since both usb_hid (which still uses the v2 API) and usb_raw (which now uses the v3 API) work, I'd call it a success ;-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18539 a95241bf-73f2-0310-859d-f6bbb57e9c96
in _AddToList()).
* Cleaned up BDragger and BShelf a bit, moved private classes into the BPrivate
namespace, renamed private methods to have the '_' prefix.
* Rewrote Dragger.h.
* Is that static dragger list needed at all? And if so, for what?`
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18487 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a TODO to some stuff that probably shouldn't be in a public header.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18174 a95241bf-73f2-0310-859d-f6bbb57e9c96
syscall, but they could not know if R5 code called them (in which case the stat
size has a different size). We now always only return the R5 stat structure here.
This fixes bug #420. We might want to find a different solution to this problem,
though.
* Be got SYMLINK_MAX wrong - it's not the maximum number of links (that's SYMLOOP_MAX),
but the maximum size of a symlink buffer. Added missing SYMLOOP_MAX and SYMLINK_MAX
constants to limits.h.
* Fixes MAXSYMLINKS to use SYMLOOP_MAX, instead of SYMLINKS_MAX (which doesn't exist
in POSIX specs, but we (intentionally) break source compatibility here).
* Reenabled the Haiku versions of stat(), fstat(), and lstat() when build for Haiku.
* Removed OpenBeOS namespace stuff from the files I touched.
* Removed superfluous StorageDefs.Private.h, whyever that ended up in a public header
is beyond me.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17894 a95241bf-73f2-0310-859d-f6bbb57e9c96
fix binary compatibility for several classes (I missed this before)
the soft synth loads by default /boot/beos/etc/synth/big_synth.sy (which I locally linked to a General Midi sf2 bank
tested with MidiSynth 1.6 on Haiku
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17864 a95241bf-73f2-0310-859d-f6bbb57e9c96
* More or less rewrote BStatusBar, too:
- Draw() now only redraws something when it's part of the updateRect.
- no more flickering (uses B_TRANSPARENT_COLOR now), this fixes bug #530.
- added Dano/Zeta-style SetTo() method.
- big cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17857 a95241bf-73f2-0310-859d-f6bbb57e9c96
fix SoftSynth::PlayHandler, offset and incr are counted in samples
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17853 a95241bf-73f2-0310-859d-f6bbb57e9c96
was limited by the visible list count, it did not care if the insertion
failed, it didn't maintain the BListItem::fHasSubitems field, neither
fVisible, and it didn't invalidate the latch of the parent, if needed.
* The "add item at end" also did not care if the item should be added to the
visible list, too, it always did.
* AddUnder() would have crashed with a NULL superitem.
* _RemoveItem() now updates the fHasSubitems field as well.
* _SuperitemForIndex() can now return the index of the superitem as well.
* SortItemsUnder() did not check if the "underItem" if the items should be
added to the visible list or not, it also just did.
* SortItemsUnder() now invalidates the part of the visible list that may
have been changed.
* This fixed bug #662, and possibly #663, too (at least I could never
reproduce it).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17812 a95241bf-73f2-0310-859d-f6bbb57e9c96
representing the interface for, well, MIME sniffer add-ons.
* Implemented the respective add-on manager and make use of it in
the MIME database code. Unfortunately the MIME DB code completely
lives in libbe.so and hence I had to put my code there too.
IMHO we should (one day) remove the direct (read-only) MIME DB
access from libbe and move everything into the registrar.
Currently the add-on manager supports built-in add-ons only; it
doesn't really load anything from disk ATM.
* Added a built-in text sniffer add-on to the registrar. It's based
upon the BSD file tool code.
This closes bug #250 (plain text files are identified as such, now).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17784 a95241bf-73f2-0310-859d-f6bbb57e9c96
Renamed lots of things, like ScreenSaverThread to ScreenSaverRunner,
refactored code, etc. Much cleaner interfaces and code.
* Fixed a couple of bugs and in the add-on handling, especially some settings
related bugs (ie. testing a screen saver will now use its latest settings,
etc.).
* Correctly implemented DPMS support in ScreenSaverPrefs and the ScreenSaver
preferences application - screen_blanker still ignores them, though.
* It's not yet font sensitive either.
* Changed the input_server add-on to not switch to the screen blanker immediately
when it's in the "blank corner" - doesn't seem to work yet, though (only tested
under Qemu).
* Correctly implemented the "preview" function (before, a screen saver would
never know it rendered a preview).
* Evaluates the return value of BScreenSaver::StartSaver().
* The screen saver thread is no longer killed without notice - it's now
always shut down properly.
* Made the code more robust against failure.
* Introduced some new bugs as well (the screen saver list view doesn't jump to
the selection anymore, for some reason), those will be fixed later (as the
remaining issues).
* Probably some more I forgot about.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17731 a95241bf-73f2-0310-859d-f6bbb57e9c96
this should simplify big times implementing ttyname() for ex, and could be handy anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17655 a95241bf-73f2-0310-859d-f6bbb57e9c96
before sending a B_MOUSE_DOWN message to any other view. This fixes bug
594 for real and another bug in BMenuBar. BMenuBar tracking will also
be simplified a bit because of this. Install items to a NULL window on
Show() as does R5 (although I don't know why yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17605 a95241bf-73f2-0310-859d-f6bbb57e9c96
Position(). This used up a virtual slot of BPositionIO. GetSize() needed to be
implemented in BFile, which uses the BStatable version as before. This should
hopefully be binary compatible. The only problem could be in source
compatibility when there are classes inheriting from BPositionIO implementing
their own GetSize().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17593 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Mesa doesn't compile yet, as some PPC specific stuff seems to be
missing, Philippe?
* Cortex and some other stuff has been marked x86-only, although
it's more of a "GCC 2.95.3"-only.
* I'm not sure if it's a bug in GCC 4, or if that's what the C
standard demands, but sizeof(some_type::some_field) is not
valid anymore :-/
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17515 a95241bf-73f2-0310-859d-f6bbb57e9c96
* removed weird stuff that seemed to have no purpose in life
* added more comments where I had to figure things out
* fWidth is now adjusted in FrameResized()
* ListView scrolls up when items are removed at the end and
there would be empty room
* fixed SwapItems(), MoveItem() and ReplaceItem() by making
DoMiscellaneous() use the private implementations instead
of calling the public ones again resulting in an endless
loop
* renamed private methods with underscore
* removed more unused/empty private methods
* some slight performance increases here and there
* more correct tracking of fFirstSelected and fLastSelected,
at least I cannot reproduce one crash in the WonderBrush
Layer list anymore
even more cleanup and testing would not hurt though...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17487 a95241bf-73f2-0310-859d-f6bbb57e9c96
disconnected (so that you can still just call ShowCursor() to have it back,
in case you want that).
* Rewrote WindowScreen.h.
* Cleanup, removed unused variables, renamed private methods.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17349 a95241bf-73f2-0310-859d-f6bbb57e9c96
translators are installed via BTranslatorRoster::StartWatching().
* Fixed GetTranslatorData() - some hooks are only optional (this puts the
JPEG, GIF, and some other translators back into the game).
* Made BTranslatorRoster::Default() thread-safe.
* Improved documentation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17267 a95241bf-73f2-0310-859d-f6bbb57e9c96
class, and only wraps around that one.
* Translating is no longer serialized, you can translate more than one object
at a time now.
* A BTranslator that is released (ie. deleted) will no longer let its BTranslatorRoster
crash.
* Removed BTranslatorRoster::Version() - this kind of call definitely makes no
sense at all. It's still exported from the sources, though, for backwards
compatibility.
* Simplified and improved code.
* Images are now unloaded only once.
* Added new method IsTranslator() that will be used by the DataTranslations preferences
application.
* Began implementing new methods StartWatching()/StopWatching() that will notify
you if new translators are installed or old ones removed (this will also be used
by DataTranslations once it's ready).
* The private BTranslatorRoster class will now add itself to the existing BApplication,
in order to provide automatic updating of the translators if needed (not yet implemented
though).
* Not heavily tested yet, there might be some regressions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17247 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The Decorator are temporarily using ui_color() - this needs to be changed
to use the DesktopSettings (when the decorator stuff gets refactored); right
now, the colors are fixed.
* Added B_WINDOW_TEXT_COLOR, B_WINDOW_INACTIVE_TAB_COLOR, and
B_WINDOW_INACTIVE_TEXT_COLOR to the UI colors, B_WINDOW_TAB_COLOR is no
longer deprecated. Note, however, that not every decorator may use these
colors.
* Removed unused and wrong (ie. hard-coded paths) stuff from ServerConfig.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17236 a95241bf-73f2-0310-859d-f6bbb57e9c96
read-only area shared between the Desktop and all applications.
* Right now, this area only contains the desktop colors, ie. B_PANEL_BACKGROUND_COLOR
etc.; ui_color() no longer needs to ask the server for these colors.
* The ui_colors are now maintained by DesktopSettings, though ColorSet is still there.
* The default colors are now hardcoded once and for everyone in InterfaceDefs.h, ie.
the app_server uses them as well.
* Desktop::Init() can now also return an error (but that is not yet accounted for).
* Cleaned up InterfaceDefs.h.
* Fixed wrong include in moreUTF8.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17232 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The private general_info structure is now setup - that fixes a part of bug #502;
NetPositive's bar remains black, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17160 a95241bf-73f2-0310-859d-f6bbb57e9c96
To reduce the number of calls to UpdateText(), the value returned is now
buffered. This fixes bug #443.
* SetValue() now calls UpdateText() and also invalidates the region where
that label is drawn.
* In asynchronous mode, B_NO_POINTER_HISTORY is set now for tracking.
* Increased minimum snooze time in synchronous mode.
* Minor cleanup, renamed fMinLimitStr to fMinLimitLabel, etc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17146 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added NOTE to BBitmap::LockBits(), has anybody some insight into this?
Otherwise we need to write a test app to discover its secrets... :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17120 a95241bf-73f2-0310-859d-f6bbb57e9c96
systems a chance to know if they have locked already.
This fixes a locking problem in BFS where one thread tried to acquire two read
locks (where someone else trying to acquire a write lock would have caused a
dead lock).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17108 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed private SetSysTrigger() to SetAutomaticTrigger().
* Added the '_' prefix to private methods that aren't called by anything outside
BMenuItem (ie. no friend classes either).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17005 a95241bf-73f2-0310-859d-f6bbb57e9c96
drawn (glyph cache returns character 0 for them), even though FontInspector
under Dano shows those arrows in the fonts used... need to check under R5
as well. This fixes the BMenuItem part of bug #158.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17003 a95241bf-73f2-0310-859d-f6bbb57e9c96
is public now, even if it may not yet be public and fixed API.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16995 a95241bf-73f2-0310-859d-f6bbb57e9c96
have a static method for spawning one (BMessageRunner::StartSending()), as
suggested by Ingo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16966 a95241bf-73f2-0310-859d-f6bbb57e9c96
it and rebuilding it on the server side (that causes a huge speed
up for regions containing many rects)
* There is a method in ServerLink that could have been used, but I
actually needed to add the direct BRegion support to LinkReceiver
* added LinkReceiver as a friend to BRegion class
* ServerApp and ServerWindow keep the CursorManager locked after they
have retrieved a cursor until they have called Acquire() on the
cursor. (Axel: what good is using atomic* stuff in Acquire() and
Release() if we have to protect this by a lock anyways?)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16957 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented the functions needed by ideinfo/idestatus using this one.
* The IDE bus manager now disables DMA if the safemode settings ask for this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16944 a95241bf-73f2-0310-859d-f6bbb57e9c96
takes a trip to the server!)
* changed look of mark and submenu symbol to better fit the rest
of the already changed controls
* the actual background color is passed to DrawMarkSymbol() and
DrawSubmenuSymbol()
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16896 a95241bf-73f2-0310-859d-f6bbb57e9c96
these should be public (they don't match any basic Be naming style
anyway :-).
* Put the code that's used by the app_server where it's needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16804 a95241bf-73f2-0310-859d-f6bbb57e9c96
that is detached from its local object; ie. it will continue to send its
messages when you delete the object.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16730 a95241bf-73f2-0310-859d-f6bbb57e9c96
useful... so I removed it
* fixed memory leak with SetPulseRate(0), fPulseRunner is now
properly freed in the Window destructor
* fTitle is now freed as well
* fix some potential leaks in BView destructor as well
I wrote a stress test app, which I'm soon going to commit as well...
it shows that not all memory leaks are fixed by this patch, I could
use some help with this...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16713 a95241bf-73f2-0310-859d-f6bbb57e9c96
This will allow to fix message related problems like drag and drop and scripting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16708 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Invocations like SetShortDescription("") will now remove the description as
well, not only SetShortDescription(NULL).
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16697 a95241bf-73f2-0310-859d-f6bbb57e9c96
* thermal driver uses get_object to obtain the passive device package.
Need changes to acpi_object_type to handle references... that'll have to come in the near future.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16637 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added more error checking to Connect() and Input/Output publishing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16625 a95241bf-73f2-0310-859d-f6bbb57e9c96
* all cursors owned by a team are visually different,
or (iaw) an already existing cursor is reused when
it is set by the client again
* changed various occurances of cursor data from "int8*"
to "uint8*"
* ServerCursors also remember the R5 data from which
they were created
* the reference counting and destruction of
ServerCursors changed: The cursor knows it is attached
to a CursorManager and one can simply use
ServerCursor::Acquire() and Release() and the reference
counting and everything is being taken care of
* destroying a ViewLayer will now correctly release a set
ServerCursor
* fixed a race condition when setting a cursor through
BView::SetViewCursor(): If the client code looks like this:
BCursor cursor(cursorData);
someView->SetViewCursor(&cursor, false);
there is a relatively high chance the BCursor destructor
told the ServerApp thread to destroy the cursor before
the ServerWindow thread got to "acquire" the cursor for
use by the view layer. The very same problem is likely the
reason that SetViewCursor works to unreliably on R5, even
when the "sync" flag is set to "true" (although it should
theoretically work in that case).
all these fixes make WonderBrush work fine again with the
new support of custom cursors.... coded by axeld and myself
(the joys of pair programming :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16521 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reordered some functions
* Area messages can now be unflattened instead of using the private _Reference and a special port code
Passing by area is now mostly working but it's not yet enabled. I will have to conduct performance tests first to see if and starting at what messagesize the overhead is reasonable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16500 a95241bf-73f2-0310-859d-f6bbb57e9c96
prevents Tracker from being quit by Command+Q.
* Also, it's now possible (as on R5) to remove the Command+Q shortcut.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16411 a95241bf-73f2-0310-859d-f6bbb57e9c96
what Be's implementation did wrong but instead of taking almost 30 seconds to
sort the MIME type database (roughly 1100 entries, and yes, that's why the
original FileTypes is that slow when it has to show the internal types), this
one needs only 4 ms for the same task (that's an amply 7500x speedup).
* Implemented some more missing functions - it's by no means complete yet, though.
* Rewrote OutlineListView.h, ListItem.h, and StringItem.h.
* Fixed some minor bugs, but there are probably a lot more.
* Major cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16349 a95241bf-73f2-0310-859d-f6bbb57e9c96
disabled (unlike SetEnabled()). They are now both using the correctly working
_UpdateTextViewColors() method.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16333 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fixed FrameResized() and FrameMoved() not
being called anymore in response to ResizeTo()
and MoveTo() since I introduced a check in
DispatchMessage() (fixes bug #123)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16312 a95241bf-73f2-0310-859d-f6bbb57e9c96
returns the root device node. Now its actually possible to
traverse the device node tree without a node to start with.
* Fixed execution order problem in dm_get_next_child_node(). The
supplied node was put first (which could cause its immediate
deletion), but was still accessed thereafter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16268 a95241bf-73f2-0310-859d-f6bbb57e9c96
complicated to get a pci_info for a given pci_device before. The
function is not very efficiently implemented, but I didn't see how to
do that without more intrusive changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16267 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed a myriad of bugs all over the place, ranging from locking errors to
deleting objects that don't belong to the one deleting them (hello HWInterface!)
* Almost all ServerWindow cursor stuff was broken; I've replaced all commands
to set a cursor with a single one AS_SET_CURSOR.
* Renamed some cursor commands.
* Changed the (broken) way ServerApp::fAppCursor was maintained - the application
cursor is now NULL as long as possible.
* Removed superfluous ServerCursor app signature stuff.
* The BApplication will no longer duplicate the default/I-beam cursors, it will
just reuse the default ones which now have fixed tokens.
* As a result, changing the cursor is now working as expected, closing bug #102.
* Rewrote Cursor.h, renamed private members to match our style guide.
* Minor cleanup.
What's still left to be done is reference counting the cursor objects to make them
work right and reliable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16237 a95241bf-73f2-0310-859d-f6bbb57e9c96
SetToImage() variants for initializing the object to the resources of
the shared object file belonging to a loaded image. Should be handy for
libraries and add-ons.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16176 a95241bf-73f2-0310-859d-f6bbb57e9c96
different "force" levels now and updates the app file info attributes
for shared object files.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16123 a95241bf-73f2-0310-859d-f6bbb57e9c96
in all drawing methods in case the parent window was
not in a "transaction" (fInTransaction). For ordinary
updates, nothing has changed, but if you call drawing
methods outside of an update, they will happen "immediately"
rather than when the link is sporadically full and auto
flushes. The effect is that the cursor in Terminal blinks
reliably, the selection in BTextViews follows the mouse
right on the spot (and so on). BWindow::BeginViewTransaction()
and EndViewTransaction() now have a meaning in Haiku too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15927 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed BShelf::_AddReplicant(), at least a bit. I managed to add the "ScreenChanger"
icon to the tray, although the icon was not drawn, and it was on the wrong
position.
* _AddReplicant() also did not reply to the waiting message source in case
of failure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15829 a95241bf-73f2-0310-859d-f6bbb57e9c96
bus, and time base frequency) in the PPC boot loader, and propagate
them to the kernel via kernel_args.
* Now we use the correct time base frequency for timer calculations.
* Implemented PPC specific system info stuff. Added a few PPC CPU
types to <OS.h>.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15817 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Less flickering when drawing the label: the area of the label is now
clipped, so there is no need to fill the background again.
* Consumed the last reserved member for the bounding box of the label.
* More or less rewrote the header.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15747 a95241bf-73f2-0310-859d-f6bbb57e9c96
AttachedToWindow().
This fixes the double team entries in the Deskbar.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15398 a95241bf-73f2-0310-859d-f6bbb57e9c96
