Our current usage of MMU indexes when EL3 is AArch32 is confused.
Architecturally, when EL3 is AArch32, all Secure code runs under the
Secure PL1&0 translation regime:
* code at EL3, which might be Mon, or SVC, or any of the
other privileged modes (PL1)
* code at EL0 (Secure PL0)
This is different from when EL3 is AArch64, in which case EL3 is its
own translation regime, and EL1 and EL0 (whether AArch32 or AArch64)
have their own regime.
We claimed to be mapping Secure PL1 to our ARMMMUIdx_EL3, but didn't
do anything special about Secure PL0, which meant it used the same
ARMMMUIdx_EL10_0 that NonSecure PL0 does. This resulted in a bug
where arm_sctlr() incorrectly picked the NonSecure SCTLR as the
controlling register when in Secure PL0, which meant we were
spuriously generating alignment faults because we were looking at the
wrong SCTLR control bits.
The use of ARMMMUIdx_EL3 for Secure PL1 also resulted in the bug that
we wouldn't honour the PAN bit for Secure PL1, because there's no
equivalent _PAN mmu index for it.
We could fix this in one of two ways:
* The most straightforward is to add new MMU indexes EL30_0,
EL30_3, EL30_3_PAN to correspond to "Secure PL1&0 at PL0",
"Secure PL1&0 at PL1", and "Secure PL1&0 at PL1 with PAN".
This matches how we use indexes for the AArch64 regimes, and
preserves propirties like being able to determine the privilege
level from an MMU index without any other information. However
it would add two MMU indexes (we can share one with ARMMMUIdx_EL3),
and we are already using 14 of the 16 the core TLB code permits.
* The more complicated approach is the one we take here. We use
the same MMU indexes (E10_0, E10_1, E10_1_PAN) for Secure PL1&0
than we do for NonSecure PL1&0. This saves on MMU indexes, but
means we need to check in some places whether we're in the
Secure PL1&0 regime or not before we interpret an MMU index.
The changes in this commit were created by auditing all the places
where we use specific ARMMMUIdx_ values, and checking whether they
needed to be changed to handle the new index value usage.
Note for potential stable backports: taking also the previous
(comment-change-only) commit might make the backport easier.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2326
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240809160430.1144805-3-peter.maydell@linaro.org
We have a long comment describing the Arm architectural translation
regimes and how we map them to QEMU MMU indexes. This comment has
got a bit out of date:
* FEAT_SEL2 allows Secure EL2 and corresponding new regimes
* FEAT_RME introduces Realm state and its translation regimes
* We now model the Cortex-R52 so that is no longer a hypothetical
* We separated Secure Stage 2 and NonSecure Stage 2 MMU indexes
* We have an MMU index per physical address spacea
Add the missing pieces so that the list of architectural translation
regimes matches the Arm ARM, and the list and count of QEMU MMU
indexes in the comment matches the enum.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240809160430.1144805-2-peter.maydell@linaro.org
AdvSIMD instructions are supposed to zero bits beyond 128.
Affects SSHLL, USHLL, SSHLL2, USHLL2.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240717060903.205098-15-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather that enumerating the types that can produce
MMX operands, examine the unit. No functional change.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20240812025844.58956-3-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross compiling QEMU configured with --static, I've been getting
configure errors like the following:
Build-time dependency glib-2.0 found: NO
../target/hexagon/meson.build:303:15: ERROR: Dependency lookup for glib-2.0 with method 'pkgconfig' failed: Could not generate libs for glib-2.0:
Package libpcre2-8 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libpcre2-8.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libpcre2-8', required by 'glib-2.0', not found
This happens because --static sets the prefer_static Meson option, but
my build machine doesn't have a static libpcre2. I don't think it
makes sense to insist that native dependencies are static, just
because I want the non-native QEMU binaries to be static.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20240805104921.4035256-1-hi@alyssa.is
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With pcrel, we cannot check the guarded page bit at translation
time, as different mappings of the same physical page may or may
not have the GP bit set.
Instead, add a couple of helpers to check the page at runtime,
after all other filters that might obviate the need for the check.
The set_btype_for_br call must be moved after the gen_a64_set_pc
call to ensure the current pc can still be computed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240802003028.795476-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define a hexagon_cpu_properties list to match the idiom used
by other targets.
Signed-off-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
For now, v66 behavior is the same as other CPUs.
Signed-off-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
The self assignment is clearly useless, and @1.last_column does not have
to be set for an expression with only a single token, so remove it.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230713120853.27023-1-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
The implementation for these instructions handles -0 as an invalid float
point value, whereas the Hexagon hardware considers it the same as +0
(which is valid). Let's fix that and add a regression test.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Coverity complained about the possible out-of-bounds access with
counter_virt/counter_virt_prev because these two arrays are
accessed with privilege mode. However, these two arrays are accessed
only when virt is enabled. Thus, the privilege mode can't be M mode.
Add the asserts anyways to detect any wrong usage of these arrays
in the future.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Fixes: Coverity CID 1558459
Fixes: Coverity CID 1558462
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240724-fixes-v1-1-4a64596b0d64@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to the risc-v specification:
"FLD and FSD are only guaranteed to execute atomically if the effective
address is naturally aligned and XLEN≥64."
We currently implement fld as MO_ATOM_IFALIGN when XLEN < 64, which does
not violate the rules. But it will hide some problems. So relax it to
MO_ATOM_NONE.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802072417.659-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zama16b loads and stores of no more than MXLEN bits defined in the F, D, and Q
extensions.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802072417.659-3-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Compressed encodings also applies to zama16b.
https://github.com/riscv/riscv-isa-manual/pull/1557
Suggested-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802072417.659-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Changed val from uint64_t to a pointer to uint64_t in hvf_sysreg_read,
but didn't change its usage in hvf_sysreg_read_cp call.
Fixes: e9e640148c ("hvf: arm: Raise an exception for sysreg by default")
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240802-hvf-v1-1-e2c0292037e5@daynix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The vcek-disabled property of the sev-snp-guest object is misspelled
vcek-required (which I suppose would use the opposite polarity) in
the call to object_class_property_add_bool(). Fix it.
Reported-by: Zixi Chen <zixchen@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit ad18376b90 we added an assert that the level value was
in-bounds for the array we're about to index into. However, the
assert condition is wrong -- env->config->interrupt_vector is an
array of uint32_t, so we should bounds check the index against
ARRAY_SIZE(...), not against sizeof().
Resolves: Coverity CID 1507131
Fixes: ad18376b90 ("target/xtensa: Assert that interrupt level is within bounds")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240731172246.3682311-1-peter.maydell@linaro.org
The FMOPA (widening) SME instruction takes pairs of half-precision
floating point values, widens them to single-precision, does a
two-way dot product and accumulates the results into a
single-precision destination. We don't quite correctly handle the
FPCR bits FZ and FZ16 which control flushing of denormal inputs and
outputs. This is because at the moment we pass a single float_status
value to the helper function, which then uses that configuration for
all the fp operations it does. However, because the inputs to this
operation are float16 and the outputs are float32 we need to use the
fp_status_f16 for the float16 input widening but the normal fp_status
for everything else. Otherwise we will apply the flushing control
FPCR.FZ16 to the 32-bit output rather than the FPCR.FZ control, and
incorrectly flush a denormal output to zero when we should not (or
vice-versa).
(In commit 207d30b5fd we tried to fix the FZ handling but
didn't get it right, switching from "use FPCR.FZ for everything" to
"use FPCR.FZ16 for everything".)
Pass the CPU env to the sme_fmopa_h helper instead of an fp_status
pointer, and have the helper pass an extra fp_status into the
f16_dotadd() function so that we can use the right status for the
right parts of this operation.
Cc: qemu-stable@nongnu.org
Fixes: 207d30b5fd ("target/arm: Use FPST_F16 for SME FMOPA (widening)")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2373
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fix leaking memory of file handle in case of error
Erase unused "pid = -1"
Add clearer error_report
Should fix Coverity CID 1558557.
Signed-off-by: Anthony Harivel <aharivel@redhat.com>
Link: https://lore.kernel.org/r/20240726102632.1324432-3-aharivel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As SDM stated, CPUID 0x12 leaves depend on CPUID_7_0_EBX_SGX (SGX
feature word).
Since FEAT_SGX_12_0_EAX, FEAT_SGX_12_0_EBX and FEAT_SGX_12_1_EAX define
multiple feature words, add the dependencies of those registers to
report the warning to user if SGX is absent.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20240730045544.2516284-4-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At present, cpu_x86_cpuid() silently masks off SGX_LC if SGX is absent.
This is not proper because the user is not told about the dependency
between the two.
So explicitly define the dependency between SGX_LC and SGX feature
words, so that user could get a warning when SGX_LC is enabled but
SGX is absent.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20240730045544.2516284-3-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID.0x7.0.ebx and CPUID.0x7.0.ecx leaves have been expressed as the
feature word lists, and the Host capability support has been checked
in x86_cpu_filter_features().
Therefore, such checks on SGX feature "words" are redundant, and
the follow-up adjustments to those feature "words" will not actually
take effect.
Remove unnecessary SGX feature words related checks.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20240730045544.2516284-2-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The feature word 'r' is a u64, and "unavail" is a u32, the operation
'r &= ~unavail' clears the high 32 bits of 'r'. This causes many vmx cases
in kvm-unit-tests to fail. Changing 'unavail' from u32 to u64 fixes this
issue.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2442
Fixes: 0b2757412c ("target/i386: drop AMD machine check bits from Intel CPUID")
Signed-off-by: Xiong Zhang <xiong.y.zhang@linux.intel.com>
Link: https://lore.kernel.org/r/20240730082927.250180-1-xiong.y.zhang@linux.intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/char/bcm2835_aux: Fix assert when receive FIFO fills up
* hw/arm/smmuv3: Assert input to oas2bits() is valid
* target/arm/kvm: Set PMU for host only when available
* target/arm/kvm: Do not silently remove PMU
* hvf: arm: Properly disable PMU
* hvf: arm: Do not advance PC when raising an exception
* hw/misc/bcm2835_property: several minor bugfixes
* target/arm: Don't assert for 128-bit tile accesses when SVL is 128
* target/arm: Fix UMOPA/UMOPS of 16-bit values
* target/arm: Ignore SMCR_EL2.LEN and SVCR_EL2.LEN if EL2 is not enabled
* system/physmem: Where we assume we have a RAM MR, assert it
* sh4, i386, m68k, xtensa, tricore, arm: fix minor Coverity issues
-----BEGIN PGP SIGNATURE-----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=NNxN
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20240730' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/char/bcm2835_aux: Fix assert when receive FIFO fills up
* hw/arm/smmuv3: Assert input to oas2bits() is valid
* target/arm/kvm: Set PMU for host only when available
* target/arm/kvm: Do not silently remove PMU
* hvf: arm: Properly disable PMU
* hvf: arm: Do not advance PC when raising an exception
* hw/misc/bcm2835_property: several minor bugfixes
* target/arm: Don't assert for 128-bit tile accesses when SVL is 128
* target/arm: Fix UMOPA/UMOPS of 16-bit values
* target/arm: Ignore SMCR_EL2.LEN and SVCR_EL2.LEN if EL2 is not enabled
* system/physmem: Where we assume we have a RAM MR, assert it
* sh4, i386, m68k, xtensa, tricore, arm: fix minor Coverity issues
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmaotMAZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3rsAEACIzQDAMKWy8DlB8o4W+a/l
# yqGijQ5e0JdAifEA2rsDbnaIs/kqDzVxBc0dgIXDxETe5LVZHB742q4vMbaSpSb2
# P8xuL0Q7NRpcIN4THPwLxW0wED+asaJc2TeyImPQRTRhLgk6yn+/4hpqQRkT0mxe
# oxxN8bnx9RssqHZ6pQCv5HYNLex3a7dljXlbjWr4KpRRFSMls1cxPSphsK1aZ1xV
# 3NXh/vgHcM0LquwxdF0uaPdPGQ1SyZb5KZ9khd0o4cpDivkns/hXQpyJ45nHsypK
# kG/TbFQsXPorprWCqBDOXY9rCM6eBDuK89mClKA34EzukIFlSMfIgxfezCzNIXaU
# o/cJCGpSzZnCdvZagEWDzkdryE3QFmmpBFRs8mcS3sb+/gm0O8YyMoCrdV87O3c5
# Y/NY1adOKTVf8FLlT3jR93k4pT6wiqIQND13fN3EbnUqfrGpocSyMD0VsYBj/gij
# PHPBFHAwCEDKVZSq6SViXdkS15arqL2V2mnOogeY1v0jTj2YRG3FyjrPOatg6tF5
# 3MoUBjTAp9ENtYHAY6mCr2vAYw6l1xZTKUwkXiO/i8rc4XQQ+A3AHhQLtWdu2K5+
# dv1E7QKur5O6FDmJxB5s/vGppfnkSUD6EEvViNSCj+hX0U9SyT80e/KClMehgJqQ
# +oME+fRoBHj1DUw4qasWsg==
# =NNxN
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 30 Jul 2024 07:39:12 PM AEST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240730' of https://git.linaro.org/people/pmaydell/qemu-arm: (21 commits)
system/physmem: Where we assume we have a RAM MR, assert it
target/sh4: Avoid shift into sign bit in update_itlb_use()
target/i386: Remove dead assignment to ss in do_interrupt64()
target/m68k: avoid shift into sign bit in dump_address_map()
target/xtensa: Make use of 'segment' in pptlb helper less confusing
target/tricore: Use unsigned types for bitops in helper_eq_b()
target/arm: Ignore SMCR_EL2.LEN and SVCR_EL2.LEN if EL2 is not enabled
target/arm: Avoid shifts by -1 in tszimm_shr() and tszimm_shl()
target/arm: Fix UMOPA/UMOPS of 16-bit values
target/arm: Don't assert for 128-bit tile accesses when SVL is 128
hw/misc/bcm2835_property: Reduce scope of variables in mbox push function
hw/misc/bcm2835_property: Restrict scope of start_num, number, otp_row
hw/misc/bcm2835_property: Avoid overflow in OTP access properties
hw/misc/bcm2835_property: Fix handling of FRAMEBUFFER_SET_PALETTE
hvf: arm: Do not advance PC when raising an exception
hvf: arm: Properly disable PMU
hvf: arm: Raise an exception for sysreg by default
target/arm/kvm: Do not silently remove PMU
target/arm/kvm: Set PMU for host only when available
hw/arm/smmuv3: Assert input to oas2bits() is valid
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
CpuModelInfo is used both as command argument and in command
returns.
Its @deprecated-props array does not make any sense in arguments,
and is silently ignored. We actually want it only as return value
of query-cpu-model-expansion.
Move it from CpuModelInfo to CpuModelExpansionType, and document
its dependence on expansion type property.
This was identified late during review [1] and we have to fix it up
while it's not part of an official QEMU release yet.
[1] https://lore.kernel.org/qemu-devel/20240719181741.35146-1-walling@linux.ibm.com/
Message-ID: <20240726203646.20279-1-walling@linux.ibm.com>
Fixes: eed0e8ffa3 ("target/s390x: filter deprecated properties based on model expansion type")
Signed-off-by: Collin Walling <walling@linux.ibm.com>
[ david: - add "Fixes", adjust description, reference v3 instead
- make property s390x-only and non-optional
- fixup "populate" vs. "populated" ]
Signed-off-by: David Hildenbrand <david@redhat.com>
In update_itlb_use() the variables or_mask and and_mask are uint8_t,
which means that in expressions like "and_mask << 24" the usual C
arithmetic conversions will result in the shift being done as a
signed int type, and so we will shift into the sign bit. For QEMU
this isn't undefined behaviour because we use -fwrapv; but we can
avoid it anyway by using uint32_t types for or_mask and and_mask.
Resolves: Coverity CID 1547628
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-id: 20240723172431.1757296-1-peter.maydell@linaro.org
Coverity points out that in do_interrupt64() in the "to inner
privilege" codepath we set "ss = 0", but because we also set
"new_stack = 1" there, later in the function we will always override
that value of ss with "ss = 0 | dpl".
Remove the unnecessary initialization of ss, which allows us to
reduce the scope of the variable to only where it is used. Borrow a
comment from helper_lcall_protected() that explains what "0 | dpl"
means here.
Resolves: Coverity CID 1527395
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723162525.1585743-1-peter.maydell@linaro.org
Coverity complains (CID 1547592) that in dump_address_map() we take a
value stored in a signed integer variable 'i' and shift it by enough
to shift into the sign bit when we construct the value 'logical'.
This isn't a bug for QEMU because we use -fwrapv semantics, but
we can make Coverity happy by using an unsigned type for the loop
variables i, j, k in this function.
While we're changing the declaration of the variables, put them
in the for() loops so their scope is the minimum required (a style
now permitted by our coding style guide).
Resolves: Coverity CID 1547592
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723154207.1483665-1-peter.maydell@linaro.org
Coverity gets confused about the use of the 'segment' variable in the
pptlb helper function: it thinks that we can take a code path where
we first initialize it:
unsigned segment = XTENSA_MPU_PROBE_B; // 0x40000000
and then use that value as a shift count:
} else if (nhits == 1 && (env->sregs[MPUENB] & (1u << segment))) {
In fact this isn't possible, beacuse xtensa_mpu_lookup() is passed
'&segment', and it uses that as an output value, which it will always
set if it returns nonzero. But the way the code is currently written
is confusing to a human reader as well as to Coverity.
Instead of initializing 'segment' at the top of the function with a
value that's only used in the "nhits == 0" code path, use the
constant value directly in that code path, and don't initialize
segment. This matches the way we use xtensa_mpu_lookup() in its
other callsites in get_physical_addr_mpu().
Resolves: Coverity CID 1547589
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-id: 20240723151454.1396826-1-peter.maydell@linaro.org
Coverity points out that in helper_eq_b() we have an int32_t 'msk'
and we end up shifting into its sign bit. This is OK for QEMU because
we use -fwrapv to give this well defined semantics, but when you look
at what this function is doing it's doing bit operations, so we
should be using an unsigned variable anyway. This also matches the
return type of the function.
Make 'ret' and 'msk' uint32_t.
Resolves: Coverity CID 1547758
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240723151042.1396610-1-peter.maydell@linaro.org
When determining the current vector length, the SMCR_EL2.LEN and
SVCR_EL2.LEN settings should only be considered if EL2 is enabled
(compare the pseudocode CurrentSVL and CurrentNSVL which call
EL2Enabled()).
We were checking against ARM_FEATURE_EL2 rather than calling
arm_is_el2_enabled(), which meant that we would look at
SMCR_EL2/SVCR_EL2 when in Secure EL1 or Secure EL0 even if Secure EL2
was not enabled.
Use the correct check in sve_vqm1_for_el_sm().
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-5-peter.maydell@linaro.org
The function tszimm_esz() returns a shift amount, or possibly -1 in
certain cases that correspond to unallocated encodings in the
instruction set. We catch these later in the trans_ functions
(generally with an "a-esz < 0" check), but before we do the
decodetree-generated code will also call tszimm_shr() or tszimm_sl(),
which will use the tszimm_esz() return value as a shift count without
checking that it is not negative, which is undefined behaviour.
Avoid the UB by checking the return value in tszimm_shr() and
tszimm_shl().
Cc: qemu-stable@nongnu.org
Resolves: Coverity CID 1547617, 1547694
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-4-peter.maydell@linaro.org
The UMOPA/UMOPS instructions are supposed to multiply unsigned 8 or
16 bit elements and accumulate the products into a 64-bit element.
In the Arm ARM pseudocode, this is done with the usual
infinite-precision signed arithmetic. However our implementation
doesn't quite get it right, because in the DEF_IMOP_64() macro we do:
sum += (NTYPE)(n >> 0) * (MTYPE)(m >> 0);
where NTYPE and MTYPE are uint16_t or int16_t. In the uint16_t case,
the C usual arithmetic conversions mean the values are converted to
"int" type and the multiply is done as a 32-bit multiply. This means
that if the inputs are, for example, 0xffff and 0xffff then the
result is 0xFFFE0001 as an int, which is then promoted to uint64_t
for the accumulation into sum; this promotion incorrectly sign
extends the multiply.
Avoid the incorrect sign extension by casting to int64_t before
the multiply, so we do the multiply as 64-bit signed arithmetic,
which is a type large enough that the multiply can never
overflow into the sign bit.
(The equivalent 8-bit operations in DEF_IMOP_32() are fine, because
the 8-bit multiplies can never overflow into the sign bit of a
32-bit integer.)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2372
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-3-peter.maydell@linaro.org
For an instruction which accesses a 128-bit element tile when
the SVL is also 128 (for example MOV z0.Q, p0/M, ZA0H.Q[w0,0]),
we will assert in get_tile_rowcol():
qemu-system-aarch64: ../../tcg/tcg-op.c:926: tcg_gen_deposit_z_i32: Assertion `len > 0' failed.
This happens because we calculate
len = ctz32(streaming_vec_reg_size(s)) - esz;$
but if the SVL and the element size are the same len is 0, and
the deposit operation asserts.
In this case the ZA storage contains exactly one 128 bit
element ZA tile, and the horizontal or vertical slice is just
that tile. This means that regardless of the index value in
the Ws register, we always access that tile. (In pseudocode terms,
we calculate (index + offset) MOD 1, which is 0.)
Special case the len == 0 case to avoid hitting the assertion
in tcg_gen_deposit_z_i32().
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-2-peter.maydell@linaro.org
This is identical with commit 30a1690f24 ("hvf: arm: Do not advance
PC when raising an exception") but for writes instead of reads.
Fixes: a2260983c6 ("hvf: arm: Add support for GICv3")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Setting pmu property used to have no effect for hvf so fix it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Any sysreg access results in an exception unless defined otherwise so
we should raise an exception by default.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvm_arch_init_vcpu() used to remove PMU when it is not available even
if the CPU model needs one. It is semantically incorrect, and may
continue execution on a misbehaving host that advertises a CPU model
while lacking its PMU. Keep the PMU when the CPU model needs one, and
let kvm_arm_vcpu_init() fail if the KVM implementation mismatches with
our expectation.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm/kvm.c checked PMU availability but unconditionally set the
PMU feature flag for the host CPU model, which is confusing. Set the
feature flag only when available.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using int32_t meant that the address was sign-extended to uint64_t
when passing to translator_ld*, triggering an assert.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2453
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Drop includes from header that is not needed by the header itself and
only include them from C files that really need it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move the parts not needed outside of mmu-radix64.c from the header to
the C file to leave only parts in the header that need to be exported.
Also drop unneded include of this header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ppc_hash64_hpt_base() and ppc_hash64_hpt_mask() functions are
mostly used by mmu-hash64.c only but there is one call to
ppc_hash64_hpt_mask() in hw/ppc/spapr_vhyp_mmu.c.in a helper function
that can be moved to mmu-hash64.c which allows these functions to be
removed from the header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function is a simple shared function, move it to other similar
static inline functions in the header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function is used only once and does not add more clarity than
doing it inline.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Completely get rid of mmu_ctx_t after converting the remaining
functions to pass raddr and prot without the context struct.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Pass raddr and prot in function parameters instead
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
There is already a hash32_bat_prot() function that does most if this
and the rest can be inlined. Export hash32_bat_prot() and rename it to
ppc_hash32_bat_prot() to match other functions and use it in
get_bat_6xx_tlb().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Replace some BAT related constants with defines from mmu-hash32.h
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Rename parameter of get_bat_6xx_tlb() from virtual to eaddr to match
other functions.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Pass raddr and prot in function parameters instead.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Pass it as a function parameter and remove it from mmu_ctx_t.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ppc6xx_tlb_check() relies on the caller to initialise raddr field
in ctx. Move this init from the only caller into the function.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This is used only once and can be inlined.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add a function to get key bit from SR and use it instead of open coded
version.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Instead of passing around ptem in context use it once in the same
function so it can be removed from mmu_ctx_t.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function is only called once and we can make the caller simpler
by inlining it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() the switch handles all cases so the
default is never reached and can be dropped. Also group together cases
which just return -4.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() tagtet_page_bits local is declared
only to use TARGET_PAGE_BITS once. Drop the unneeded variable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() ds is used as bool, declare it as
such. Also use named constant instead of hex value.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Pass it as a parameter instead. Also use named constants instead of
hex values when extracting bits from SR.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function is used only once, its return value is ignored and one
of its parameter is a return value from a previous call. It is better
to inline it in the caller and remove it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Return hash value via a parameter and remove it from mmu_ctx.t.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The eaddr field of mmu_ctx_t is set once but never used so can be
removed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Invert conditions to avoid deep nested ifs and return early instead.
Remove some obvious comments that don't add more clarity.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Instead of using a local ret variable return directly and remove the
local.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In ppc6xx_tlb_pte_check() the pp variable is used only once to pass it
to a function parameter with the same name. Remove the local and
inline the value. Also use named constant for the hex value to make it
clearer.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In ppc6xx_tlb_pte_check() the pteh variable is used only once to
compare to the h parameter of the function. Inline its value and use
pteh name for the function parameter which is more descriptive.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ptev variable in ppc6xx_tlb_pte_check() is used only once and just
obfuscates an otherwise clear value. Get rid of it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ptem variable in ppc6xx_tlb_pte_check() is used only once,
simplify by removing it as the value is already clear itself without
adding a local name for it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The mmask local variable is a less descriptive local name for a
constant. Drop it and use the constant directly in the two places it
is needed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reorganise ppc_hash32_pp_prot() swapping the if legs so it does not
test for negative first and clean up to make it shorter. Also rename
it to ppc_hash32_prot().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Updated many VSX instructions to use tcg_gen_qemu_ld/st_i128, instead of using
tcg_gen_qemu_ld/st_i64 consecutively.
Introduced functions {get,set}_vsr_full to facilitate the above & for future use.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Updated instructions {l, st}vx to use tcg_gen_qemu_ld/st_i128,
instead of using 64 bits loads/stores in succession.
Introduced functions {get, set}_avr_full in vmx-impl.c.inc to
facilitate the above, and potential future usage.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Those functions are used to ld/st data to and from Altivec registers,
in 64 bits chunks, and are only used in vmx-impl.c.inc file,
hence the clean-up movement.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification:
xvcmp{eq, gt, ge, ne}{s, d}p : XX3-form
The changes were verified by validating that the tcg-ops generated for those
instructions remain the same which were captured using the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification:
lxv{b16, d2, h8, w4, ds, ws}x : X-form
stxv{b16, d2, h8, w4}x : X-form
The changes were verified by validating that the tcg-ops generated for those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
{l, st}xvl(l) : X-form
The changes were verified by validating that the tcg-ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Also added a new function do_ea_calc_ra to calculate the effective address :
EA <- (RA == 0) ? 0 : GPR[RA], which is now used by the above-said insns,
and shall be used later by (p){lx, stx}vp insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: Fix 32-bit build]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
lxs{d, iwa, ibz, ihz, iwz, sp}x : X-form
stxs{d, ib, ih, iw, sp}x : X-form
The changes were verified by validating that the tcg-ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
xxl{and, andc, or, orc, nor, xor, nand, eqv} : XX3-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification:
x{s, v}{add, sub, mul, div}{s, d}p : XX3-form
xs{max, min}dp, xv{max, min}{s, d}p : XX3-form
The changes were verfied by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving PPC2_ISA300 flag check out of do_helper_XX3 method in vmx-impl.c.inc
so that the helper can be used with other instructions as well.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
No need for a full comparison; xor produces non-zero bits for QC just fine.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rath.chinmay@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
v{add,sub}{u,s}{b,h,w}s : VX-form
The changes were verified by validating that the tcg ops generated by those
instructions remain the same, which were captured with the '-d in_asm,op' flag.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Recent POWER CPUs can operate in "LPAR per core" or "LPAR per thread"
modes. In per-core mode, some SPRs and IPI doorbells are shared between
threads in a core. In per-thread mode, supervisor and user state is
not shared between threads.
OpenPOWER systems after POWER8 use LPAR per thread mode, and it is
required for KVM. Enterprise systems use LPAR per core mode, as they
partition the machine by core.
Implement a lpar-per-core machine option for powernv machines. This
is fixed true for POWER8 machines, and defaults off for P9 and P10.
With this change, powernv8 SMT now works sufficiently to run Linux,
with a single socket. Multi-threaded KVM guests still have problems,
as does multi-socket Linux boot.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
POWER10 has a quirk in its ChipTOD addressing that requires the even
small-core to be selected even when programming the odd small-core.
This allows skiboot chiptod init to run in big-core mode.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Power9 CPUs have a core thread state register accessible via SPRC/SPRD
indirect registers. This register includes a bit for big-core mode,
which skiboot requires.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The decision to branch out to a slower SMT path in instruction
emulation will become a bit more complicated with the way that
"big-core" topology that will be implemented in subsequent changes.
Hide these details from the wider CPU emulation code with a bool
has_smt_siblings flag that can be set by machine initialisation.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add helpers for TCG code to determine if there are SMT siblings
sharing per-core and per-lpar registers. This simplifies the
callers and makes SMT register topology simpler to modify with
later changes.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The way SMT thread siblings are matched is clunky, using hard-coded
logic that checks the PIR SPR.
Change that to use a new core_index variable in the CPUPPCState,
where all siblings have the same core_index. CPU realize routines have
flexibility in setting core/sibling topology.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SPRC/SPRD were recently added to all BookS CPUs supported, but
they are only tested on POWER9 and POWER10, so restrict them to
those CPUs.
SPR indirect scratch registers presently replicated per-CPU like
SMT SPRs, but the PnvCore is a better place for them since they
are restricted to P9/P10.
Also add SPR indirect read access to core thread state for POWER9
since skiboot accesses that when booting to check for big-core
mode.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The timebase state machine is per per-core state and can be driven
by any thread in the core. It is currently implemented as a hack
where the state is in a CPU structure and only thread 0's state is
accessed by the chiptod, which limits programming the timebase
side of the state machine to thread 0 of a core.
Move the state out into PnvCore and share it among all threads.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
POWER8 (ISA v2.07S) introduced the doorbell facility, the msgsnd
instruction behaved mostly like msgsndp, it was addressed by TIR
and could only send interrupts between threads on the core.
ISA v3.0 changed msgsnd to be addressed by PIR and can interrupt
any thread in the system.
msgsnd only implements the v3.0 semantics, which can make
multi-threaded POWER8 hang when booting Linux (due to IPIs
failing). This change adds v2.07 semantics.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The patch enables HASHPKEYR migration by hooking with the
"KVM one reg" ID KVM_REG_PPC_HASHPKEYR.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The patch enables HASHKEYR migration by hooking with the
"KVM one reg" ID KVM_REG_PPC_HASHKEYR.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The patch enables DEXCR migration by hooking with the
"KVM one reg" ID KVM_REG_PPC_DEXCR.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Every other architecture does this, and debuggers need it to be able to
identify which prstatus note corresponds to which CPU.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
On ppc64, the PowerVM hypervisor runs with limited memory and a VCPU
creation during hotplug may fail during kvm_ioctl for KVM_CREATE_VCPU,
leading to termination of guest since errp is set to &error_fatal while
calling kvm_init_vcpu. This unexpected behaviour can be avoided by
pre-creating and parking vcpu on success or return error otherwise.
This enables graceful error delivery for any vcpu hotplug failures while
the guest can keep running.
Also introducing KVM AccelCPUClass to init cpu_target_realize for kvm.
Tested OK by repeatedly doing a hotplug/unplug of vcpus as below:
#virsh setvcpus hotplug 40
#virsh setvcpus hotplug 70
error: internal error: unable to execute QEMU command 'device_add':
kvmppc_cpu_realize: vcpu hotplug failed with -12
Signed-off by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reported-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Suggested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Suggested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
V2: Add missing bsd-user/aarch64/target.h
This patch series includes two main sets of patches. To make it simple to
review, I've included the changes from my student which the later changes depend
on. I've included a change from Jessica and Doug as well. I've reviewed them,
but more eyes never hurt.
I've also included a number of 'touch up' patches needed either to get the
aarch64 building, or to implmement suggestions from prior review cycles. The
main one is what's charitably described as a kludge: force aarch64 to use 4k
pages. The qemu-project (and blitz branch) hasn't had the necessary changes to
bsd-user needed to support variable page size.
Sorry this is so late... Live has conspired to delay me.
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org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=RPuN
-----END PGP SIGNATURE-----
Merge tag 'bsd-user-for-9.1-pull-request' of gitlab.com:bsdimp/qemu into staging
bsd-user: Misc changes for 9.1 (I hope)
V2: Add missing bsd-user/aarch64/target.h
This patch series includes two main sets of patches. To make it simple to
review, I've included the changes from my student which the later changes depend
on. I've included a change from Jessica and Doug as well. I've reviewed them,
but more eyes never hurt.
I've also included a number of 'touch up' patches needed either to get the
aarch64 building, or to implmement suggestions from prior review cycles. The
main one is what's charitably described as a kludge: force aarch64 to use 4k
pages. The qemu-project (and blitz branch) hasn't had the necessary changes to
bsd-user needed to support variable page size.
Sorry this is so late... Live has conspired to delay me.
# -----BEGIN PGP SIGNATURE-----
# Comment: GPGTools - https://gpgtools.org
#
# iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmahejwACgkQbBzRKH2w
# EQCXuQ/+Pj1Izmox/y9X1trn1T8KC7JdMtimdLiGMaS4C6+gcThXJkIB4l9ZStbV
# 7rI540mpqVf0KSRLYwc2/ATyhYU7Ffsz02WPn7Xn/NvmmITp4kjw9Z0gd7C7mPVq
# fS8DJbTyFQDy5dO8FUKLaTfnlYQe+NCnL421t9wFkIrlEepFygRaBaJN5yWVoC+0
# 1Ob6dG+JEV5BmNguMufvvI3S7nEFEnSBGpNqW3ljrRHAZjdNhv8d9GBYbj1laR1r
# HQ6r5+u4ZmKCuUbchS0jxGkug0DjuQC7iq+rQ/7fhLYLChkPZ4P2RxNv8ibzKjEV
# wlTy5LaM+WZNzKWdcHfDFMomeSnnUkOOfAMipMney2jedEjTIwCFDnP4zCAuG83V
# RbdXWfleP1rDto3AQ765pFneqm3+su2Dh4TKaTSnq6gd1eORJ2IL8dubCfcVwZCy
# TofemXPWh0HX3kwlD9IB9rqplQZFL78TkQ47btftxinHCLCQOOHRDPVG0IahQPjo
# pgK4yVH7WA7pWV2Xbo4ngG3sX5U1TyBCbfkkAwhq+P3gjnU8zxonx8Tk/qLeEDdH
# KEypi/pkGFQKZY0wc/y4XM+XQh6E1l8gMaQ4gJWK1qlyVtUKM1BiNQ2lweohYzC8
# p6WAfBQLPpzY4mDWfJMF6DsgObLwWmYbgKzuOtHgST1D/Ebk3Zo=
# =RPuN
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Jul 2024 08:03:40 AM AEST
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* tag 'bsd-user-for-9.1-pull-request' of gitlab.com:bsdimp/qemu:
bsd-user: Add target.h for aarch64.
bsd-user: Add aarch64 build to tree
bsd-user: Make compile for non-linux user-mode stuff
bsd-user: Define TARGET_SIGSTACK_ALIGN and use it to round stack
bsd-user: Sync fork_start/fork_end with linux-user
bsd-user: Hard wire aarch64 to be 4k pages only
bsd-user: Simplify the implementation of execve
bsd-user:Add AArch64 improvements and signal handling functions
bsd-user:Add set_mcontext function for ARM AArch64
bsd-user:Add setup_sigframe_arch function for ARM AArch64
bsd-user:Add get_mcontext function for ARM AArch64
bsd-user:Add ARM AArch64 signal handling support
bsd-user:Add ARM AArch64 support and capabilities
bsd-user:Add AArch64 register handling and related functions
bsd-user:Add CPU initialization and management functions
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the lddir level is 4 and the base is a HugePage, we may try to put value 4
into a field in the TLBENTRY that is only 2 bits wide.
Fixes: Coverity CID 1547717
Fixes: 9c70db9a43 ("target/loongarch: Fix tlb huge page loading issue")
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240724015853.1317396-1-gaosong@loongson.cn>
- Restrict probe_access*() functions to TCG (Phil)
- Extract do_invalidate_device_tlb from vtd_process_device_iotlb_desc (Clément)
- Fixes in Loongson IPI model (Bibo & Phil)
- Make docs/interop/firmware.json compatible with qapi-gen.py script (Thomas)
- Correct MPC I2C MMIO region size (Zoltan)
- Remove useless cast in Loongson3 Virt machine (Yao)
- Various uses of range overlap API (Yao)
- Use ERRP_GUARD macro in nubus_virtio_mmio_realize (Zhao)
- Use DMA memory API in Goldfish UART model (Phil)
- Expose fifo8_pop_buf and introduce fifo8_drop (Phil)
- MAINTAINERS updates (Zhao, Phil)
-----BEGIN PGP SIGNATURE-----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=J/I2
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240723' of https://github.com/philmd/qemu into staging
Misc HW patch queue
- Restrict probe_access*() functions to TCG (Phil)
- Extract do_invalidate_device_tlb from vtd_process_device_iotlb_desc (Clément)
- Fixes in Loongson IPI model (Bibo & Phil)
- Make docs/interop/firmware.json compatible with qapi-gen.py script (Thomas)
- Correct MPC I2C MMIO region size (Zoltan)
- Remove useless cast in Loongson3 Virt machine (Yao)
- Various uses of range overlap API (Yao)
- Use ERRP_GUARD macro in nubus_virtio_mmio_realize (Zhao)
- Use DMA memory API in Goldfish UART model (Phil)
- Expose fifo8_pop_buf and introduce fifo8_drop (Phil)
- MAINTAINERS updates (Zhao, Phil)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmagFF8ACgkQ4+MsLN6t
# wN5bKg//f5TwUhsy2ff0FJpHheDOj/9Gc2nZ1U/Fp0E5N3sz3A7MGp91wye6Xwi3
# XG34YN9LK1AVzuCdrEEs5Uaxs1ZS1R2mV+fZaGHwYYxPDdnXxGyp/2Q0eyRxzbcN
# zxE2hWscYSZbPVEru4HvZJKfp4XnE1cqA78fJKMAdtq0IPq38tmQNRlJ+gWD9dC6
# ZUHXPFf3DnucvVuwqb0JYO/E+uJpcTtgR6pc09Xtv/HFgMiS0vKZ1I/6LChqAUw9
# eLMpD/5V2naemVadJe98/dL7gIUnhB8GTjsb4ioblG59AO/uojutwjBSQvFxBUUw
# U5lX9OSn20ouwcGiqimsz+5ziwhCG0R6r1zeQJFqUxrpZSscq7NQp9ygbvirm+wS
# edLc8yTPf4MtYOihzPP9jLPcXPZjEV64gSnJISDDFYWANCrysX3suaFEOuVYPl+s
# ZgQYRVSSYOYHgNqBSRkPKKVUxskSQiqLY3SfGJG4EA9Ktt5lD1cLCXQxhdsqphFm
# Ws3zkrVVL0EKl4v/4MtCgITIIctN1ZJE9u3oPJjASqSvK6EebFqAJkc2SidzKHz0
# F3iYX2AheWNHCQ3HFu023EvFryjlxYk95fs2f6Uj2a9yVbi813qsvd3gcZ8t0kTT
# +dmQwpu1MxjzZnA6838R6OCMnC+UpMPqQh3dPkU/5AF2fc3NnN8=
# =J/I2
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 Jul 2024 06:36:47 AM AEST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240723' of https://github.com/philmd/qemu: (28 commits)
MAINTAINERS: Add myself as a reviewer of machine core
MAINTAINERS: Cover guest-agent in QAPI schema
util/fifo8: Introduce fifo8_drop()
util/fifo8: Expose fifo8_pop_buf()
util/fifo8: Rename fifo8_pop_buf() -> fifo8_pop_bufptr()
util/fifo8: Rename fifo8_peek_buf() -> fifo8_peek_bufptr()
util/fifo8: Use fifo8_reset() in fifo8_create()
util/fifo8: Fix style
chardev/char-fe: Document returned value on error
hw/char/goldfish: Use DMA memory API
hw/nubus/virtio-mmio: Fix missing ERRP_GUARD() in realize handler
dump: make range overlap check more readable
crypto/block-luks: make range overlap check more readable
system/memory_mapping: make range overlap check more readable
sparc/ldst_helper: make range overlap check more readable
cxl/mailbox: make range overlap check more readable
util/range: Make ranges_overlap() return bool
hw/mips/loongson3_virt: remove useless type cast
hw/i2c/mpc_i2c: Fix mmio region size
docs/interop/firmware.json: convert "Example" section
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* hpet: emulation improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaelL4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMXoQf+K77lNlHLETSgeeP3dr7yZPOmXjjN
qFY/18jiyLw7MK1rZC09fF+n9SoaTH8JDKupt0z9M1R10HKHLIO04f8zDE+dOxaE
Rou3yKnlTgFPGSoPPFr1n1JJfxtYlLZRoUzaAcHUaa4W7JR/OHJX90n1Rb9MXeDk
jV6P0v1FWtIDdM6ERm9qBGoQdYhj6Ra2T4/NZKJFXwIhKEkxgu4yO7WXv8l0dxQz
jE4fKotqAvrkYW1EsiVZm30lw/19duhvGiYeQXoYhk8KKXXjAbJMblLITSNWsCio
3l6Uud/lOxekkJDAq5nH3H9hCBm0WwvwL+0vRf3Mkr+/xRGvrhtmUdp8NQ==
=00mB
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/kvm: support for reading RAPL MSRs using a helper program
* hpet: emulation improvements
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaelL4UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMXoQf+K77lNlHLETSgeeP3dr7yZPOmXjjN
# qFY/18jiyLw7MK1rZC09fF+n9SoaTH8JDKupt0z9M1R10HKHLIO04f8zDE+dOxaE
# Rou3yKnlTgFPGSoPPFr1n1JJfxtYlLZRoUzaAcHUaa4W7JR/OHJX90n1Rb9MXeDk
# jV6P0v1FWtIDdM6ERm9qBGoQdYhj6Ra2T4/NZKJFXwIhKEkxgu4yO7WXv8l0dxQz
# jE4fKotqAvrkYW1EsiVZm30lw/19duhvGiYeQXoYhk8KKXXjAbJMblLITSNWsCio
# 3l6Uud/lOxekkJDAq5nH3H9hCBm0WwvwL+0vRf3Mkr+/xRGvrhtmUdp8NQ==
# =00mB
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 03:19:58 AM AEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
hpet: avoid timer storms on periodic timers
hpet: store full 64-bit target value of the counter
hpet: accept 64-bit reads and writes
hpet: place read-only bits directly in "new_val"
hpet: remove unnecessary variable "index"
hpet: ignore high bits of comparator in 32-bit mode
hpet: fix and cleanup persistence of interrupt status
Add support for RAPL MSRs in KVM/Qemu
tools: build qemu-vmsr-helper
qio: add support for SO_PEERCRED for socket channel
target/i386: do not crash if microvm guest uses SGX CPUID leaves
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
use ranges_overlap() instead of open-coding the overlap check to improve
the readability of the code.
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240722040742.11513-9-yaoxt.fnst@fujitsu.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We include the files that define PR_MTE_TCF_SHIFT only on Linux, but use
them unconditionally. Restrict its use to Linux-only.
"It's ugly, but it's not actually wrong."
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Only support 4k pages for aarch64 binaries. The variable page size stuff
isn't working just yet, so put in this lessor-of-evils kludge until that
is complete.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
target/arm: Use set_helper_retaddr for dc_zva, sve and sme
target/ppc: Tidy dcbz helpers
target/ppc: Use set_helper_retaddr for dcbz
target/s390x: Use set_helper_retaddr in mem_helper.c
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmafJKIdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+FBAf7Bup+karxeGHZx2rN
cPeF248bcCWTxBWHK7dsYze4KqzsrlNIJlPeOKErU2bbbRDZGhOp1/N95WVz+P8V
6Ny63WTsAYkaFWKxE6Jf0FWJlGw92btk75pTV2x/TNZixg7jg0vzVaYkk0lTYc5T
m5e4WycYEbzYm0uodxI09i+wFvpd+7WCnl6xWtlJPWZENukvJ36Ss43egFMDtuMk
vTJuBkS9wpwZ9MSi6EY6M+Raieg8bfaotInZeDvE/yRPNi7CwrA7Dgyc1y626uBA
joGkYRLzhRgvT19kB3bvFZi1AXa0Pxr+j0xJqwspP239Gq5qezlS5Bv/DrHdmGHA
jaqSwg==
=XgUE
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240723' of https://gitlab.com/rth7680/qemu into staging
accel/tcg: Export set/clear_helper_retaddr
target/arm: Use set_helper_retaddr for dc_zva, sve and sme
target/ppc: Tidy dcbz helpers
target/ppc: Use set_helper_retaddr for dcbz
target/s390x: Use set_helper_retaddr in mem_helper.c
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmafJKIdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+FBAf7Bup+karxeGHZx2rN
# cPeF248bcCWTxBWHK7dsYze4KqzsrlNIJlPeOKErU2bbbRDZGhOp1/N95WVz+P8V
# 6Ny63WTsAYkaFWKxE6Jf0FWJlGw92btk75pTV2x/TNZixg7jg0vzVaYkk0lTYc5T
# m5e4WycYEbzYm0uodxI09i+wFvpd+7WCnl6xWtlJPWZENukvJ36Ss43egFMDtuMk
# vTJuBkS9wpwZ9MSi6EY6M+Raieg8bfaotInZeDvE/yRPNi7CwrA7Dgyc1y626uBA
# joGkYRLzhRgvT19kB3bvFZi1AXa0Pxr+j0xJqwspP239Gq5qezlS5Bv/DrHdmGHA
# jaqSwg==
# =XgUE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 01:33:54 PM AEST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20240723' of https://gitlab.com/rth7680/qemu:
target/riscv: Simplify probing in vext_ldff
target/s390x: Use set/clear_helper_retaddr in mem_helper.c
target/s390x: Use user_or_likely in access_memmove
target/s390x: Use user_or_likely in do_access_memset
target/ppc: Improve helper_dcbz for user-only
target/ppc: Merge helper_{dcbz,dcbzep}
target/ppc: Split out helper_dbczl for 970
target/ppc: Hoist dcbz_size out of dcbz_common
target/ppc/mem_helper.c: Remove a conditional from dcbz_common()
target/arm: Use set/clear_helper_retaddr in SVE and SME helpers
target/arm: Use set/clear_helper_retaddr in helper-a64.c
accel/tcg: Move {set,clear}_helper_retaddr to cpu_ldst.h
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current pairing of tlb_vaddr_to_host with extra is either
inefficient (user-only, with page_check_range) or incorrect
(system, with probe_pages).
For proper non-fault behaviour, use probe_access_flags with
its nonfault parameter set to true.
Reviewed-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid a race condition with munmap in another thread.
For access_memset and access_memmove, manage the value
within the helper. For uses of access_{get,set}_byte,
manage the value across the for loops.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Invert the conditional, indent the block, and use the macro
that expands to true for user-only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Eliminate the ifdef by using a predicate that is
always true with CONFIG_USER_ONLY.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mark the reserve_addr check unlikely. Use tlb_vaddr_to_host
instead of probe_write, relying on the memset itself to test
for page writability. Use set/clear_helper_retaddr so that
we can properly unwind on segfault.
With this, a trivial loop around guest memset will no longer
spend nearly 25% of runtime within page_get_flags.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge the two and pass the mmu_idx directly from translation.
Swap the argument order in dcbz_common to avoid extra swaps.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can determine at translation time whether the insn is or
is not dbczl. We must retain a runtime check against the
HID5 register, but we can move that to a separate function
that never affects other ppc models.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 970 logic does not apply to dcbzep, which is an e500 insn.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of passing a bool and select a value within dcbz_common() let
the callers pass in the right value to avoid this conditional
statement. On PPC dcbz is often used to zero memory and some code uses
it a lot. This change improves the run time of a test case that copies
memory with a dcbz call in every iteration from 6.23 to 5.83 seconds.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240622204833.5F7C74E6000@zero.eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Avoid a race condition with munmap in another thread.
Use around blocks that exclusively use "host_fn".
Keep the blocks as small as possible, but without setting
and clearing for every operation on one page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use these in helper_dc_dva and the FEAT_MOPS routines to
avoid a race condition with munmap in another thread.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Starting with the "Sandy Bridge" generation, Intel CPUs provide a RAPL
interface (Running Average Power Limit) for advertising the accumulated
energy consumption of various power domains (e.g. CPU packages, DRAM,
etc.).
The consumption is reported via MSRs (model specific registers) like
MSR_PKG_ENERGY_STATUS for the CPU package power domain. These MSRs are
64 bits registers that represent the accumulated energy consumption in
micro Joules. They are updated by microcode every ~1ms.
For now, KVM always returns 0 when the guest requests the value of
these MSRs. Use the KVM MSR filtering mechanism to allow QEMU handle
these MSRs dynamically in userspace.
To limit the amount of system calls for every MSR call, create a new
thread in QEMU that updates the "virtual" MSR values asynchronously.
Each vCPU has its own vMSR to reflect the independence of vCPUs. The
thread updates the vMSR values with the ratio of energy consumed of
the whole physical CPU package the vCPU thread runs on and the
thread's utime and stime values.
All other non-vCPU threads are also taken into account. Their energy
consumption is evenly distributed among all vCPUs threads running on
the same physical CPU package.
To overcome the problem that reading the RAPL MSR requires priviliged
access, a socket communication between QEMU and the qemu-vmsr-helper is
mandatory. You can specified the socket path in the parameter.
This feature is activated with -accel kvm,rapl=true,path=/path/sock.sock
Actual limitation:
- Works only on Intel host CPU because AMD CPUs are using different MSR
adresses.
- Only the Package Power-Plane (MSR_PKG_ENERGY_STATUS) is reported at
the moment.
Signed-off-by: Anthony Harivel <aharivel@redhat.com>
Link: https://lore.kernel.org/r/20240522153453.1230389-4-aharivel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, there is no way to execute the query-cpu-model-expansion
command to retrieve a comprehenisve list of deprecated properties, as
the result is dependent per-model. To enable this, the expansion output
is modified as such:
When reporting a "full" CPU model, show the *entire* list of deprecated
properties regardless if they are supported on the model. A full
expansion outputs all known CPU model properties anyway, so it makes
sense to report all deprecated properties here too.
This allows management apps to query a single model (e.g. host) to
acquire the full list of deprecated properties.
Additionally, when reporting a "static" CPU model, the command will
only show deprecated properties that are a subset of the model's
*enabled* properties. This is more accurate than how the query was
handled before, which blindly reported deprecated properties that
were never otherwise introduced for certain models.
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-ID: <20240719181741.35146-1-walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The semihosting feature depends on TCG (due to the probe_access
API access). Although TCG is the single accelerator currently
available for the xtensa target, use the Kconfig "imply" directive
which is more correct (if we were to support a different accel).
Reported-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-8-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-15-alex.bennee@linaro.org>
Semihosting currently uses the TCG probe_access API. To prepare for
encoding the TCG dependency in Kconfig, do not enable it unless TCG
is available.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240717105723.58965-7-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-14-alex.bennee@linaro.org>
Semihosting currently uses the TCG probe_access API. To prepare for
encoding the TCG dependency in Kconfig, do not enable it unless TCG
is available.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240717105723.58965-6-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-13-alex.bennee@linaro.org>
The semihosting feature depends on TCG (due to the probe_access
API access). Although TCG is the single accelerator currently
available for the m68k target, use the Kconfig "imply" directive
which is more correct (if we were to support a different accel).
Reported-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-5-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-12-alex.bennee@linaro.org>
Since the SEMIHOSTING feature is optional, we need
a stub to link when it is disabled.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-4-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-11-alex.bennee@linaro.org>
Since the SEMIHOSTING feature is optional, we need
a stub to link when it is disabled.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-3-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-10-alex.bennee@linaro.org>
Coverity reported a memory leak (CID 1549757) in this code and its
admittedly rather clumsy handling of extending the command table.
Instead of handing over a full array of the commands lets use the
lighter weight GPtrArray and simply test for the presence of each
entry as we go. This avoids complications of transferring ownership of
arrays and keeps the final command entries as static entries in the
target code.
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Gustavo Bueno Romero <gustavo.romero@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-4-alex.bennee@linaro.org>
GDB already support LoongArch vector extension[1], QEMU gdb adds
LoongArch vector registers support, so that users can use 'info all-registers'
to get all vector registers values.
[1]: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=1e9569f383a3d5a88ee07d0c2401bd95613c222e
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewd-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240711024454.3075183-1-gaosong@loongson.cn>
* Fix handling of LDAPR/STLR with negative offset
* LDAPR should honour SCTLR_ELx.nAA
* Use float_status copy in sme_fmopa_s
* hw/display/bcm2835_fb: fix fb_use_offsets condition
* hw/arm/smmuv3: Support and advertise nesting
* Use FPST_F16 for SME FMOPA (widening)
* tests/arm-cpu-features: Do not assume PMU availability
* hvf: arm: Do not advance PC when raising an exception
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmaZFlUZHHBldGVyLm1h
eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3iJuEACtVh1Wp93XMsL3llAZkQlx
DUCnDCvAM2qiiTIMOqPQzeKTIkRV9aFh1YWzOtMFKai6UkBU6p1b4bPqb5SIr99G
Ayps4+WzAHsjTqBGEpIIDWL6GqMwv9azBnRAYNb+Cg9O3SzEnCdGOKCfGYTXXPRz
zQ1NIgqZSUC5jg3XgkU22J3VMsOUWijbzxnGXhOyemSIEhREl+t6Ns3ca3n47/jk
JIw1g6o0mpefPPkaLq6ftVwpn1L63iYQugn4VCrIhtIoOM8vmnShbI9/GwzL4AYk
n28nwPl948Xby13kCYmu6Slt8Rmm7M33pBDJzsVtbaeBSd44XHrov8Y1+e1FhAco
lxrWY/2rG9HiWKGLdAeCKwVxB186DKiTmuK7lcN+eBu3VbOLjDiVE0d1bK4HqGyc
nzA/Aq81Y9p5Z7wzX40sVFlq0j1pQDQWk6GgPfMA4ueHKEEobxC3C+k1q9m02gjQ
qesOFzViiGe0j7JER84qqcatIaTk09xfbXL/uMZx8oP/iKa1pyMUx2blChXOXVTx
oGkO2h3/QCpRIos8d8WM/bso16EkpraInM4748iumSLuxDxTwiIikK/hpsCLDwUN
dLsH/hAMz+yQOFubFoRt4IlsGVnk5asmTDMb4S8RojdF2KzHuzbJMgdEOe62631g
IOAc7Tn3TIm5MpAxXOXgJA==
=/aEm
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20240718' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Fix handling of LDAPR/STLR with negative offset
* LDAPR should honour SCTLR_ELx.nAA
* Use float_status copy in sme_fmopa_s
* hw/display/bcm2835_fb: fix fb_use_offsets condition
* hw/arm/smmuv3: Support and advertise nesting
* Use FPST_F16 for SME FMOPA (widening)
* tests/arm-cpu-features: Do not assume PMU availability
* hvf: arm: Do not advance PC when raising an exception
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmaZFlUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3iJuEACtVh1Wp93XMsL3llAZkQlx
# DUCnDCvAM2qiiTIMOqPQzeKTIkRV9aFh1YWzOtMFKai6UkBU6p1b4bPqb5SIr99G
# Ayps4+WzAHsjTqBGEpIIDWL6GqMwv9azBnRAYNb+Cg9O3SzEnCdGOKCfGYTXXPRz
# zQ1NIgqZSUC5jg3XgkU22J3VMsOUWijbzxnGXhOyemSIEhREl+t6Ns3ca3n47/jk
# JIw1g6o0mpefPPkaLq6ftVwpn1L63iYQugn4VCrIhtIoOM8vmnShbI9/GwzL4AYk
# n28nwPl948Xby13kCYmu6Slt8Rmm7M33pBDJzsVtbaeBSd44XHrov8Y1+e1FhAco
# lxrWY/2rG9HiWKGLdAeCKwVxB186DKiTmuK7lcN+eBu3VbOLjDiVE0d1bK4HqGyc
# nzA/Aq81Y9p5Z7wzX40sVFlq0j1pQDQWk6GgPfMA4ueHKEEobxC3C+k1q9m02gjQ
# qesOFzViiGe0j7JER84qqcatIaTk09xfbXL/uMZx8oP/iKa1pyMUx2blChXOXVTx
# oGkO2h3/QCpRIos8d8WM/bso16EkpraInM4748iumSLuxDxTwiIikK/hpsCLDwUN
# dLsH/hAMz+yQOFubFoRt4IlsGVnk5asmTDMb4S8RojdF2KzHuzbJMgdEOe62631g
# IOAc7Tn3TIm5MpAxXOXgJA==
# =/aEm
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 11:19:17 PM AEST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240718' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits)
hvf: arm: Do not advance PC when raising an exception
tests/arm-cpu-features: Do not assume PMU availability
tests/tcg/aarch64: Add test cases for SME FMOPA (widening)
target/arm: Use FPST_F16 for SME FMOPA (widening)
target/arm: Use float_status copy in sme_fmopa_s
hw/arm/smmu: Refactor SMMU OAS
hw/arm/smmuv3: Support and advertise nesting
hw/arm/smmuv3: Handle translation faults according to SMMUPTWEventInfo
hw/arm/smmuv3: Support nested SMMUs in smmuv3_notify_iova()
hw/arm/smmu: Support nesting in the rest of commands
hw/arm/smmu: Introduce smmu_iotlb_inv_asid_vmid
hw/arm/smmu: Support nesting in smmuv3_range_inval()
hw/arm/smmu-common: Support nested translation
hw/arm/smmu-common: Add support for nested TLB
hw/arm/smmu-common: Rework TLB lookup for nesting
hw/arm/smmuv3: Translate CD and TT using stage-2 table
hw/arm/smmu: Introduce CACHED_ENTRY_TO_ADDR
hw/arm/smmu: Consolidate ASID and VMID types
hw/arm/smmu: Split smmuv3_translate()
hw/arm/smmu: Use enum for SMMU stage
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
hvf did not advance PC when raising an exception for most unhandled
system registers, but it mistakenly advanced PC when raising an
exception for GICv3 registers.
Cc: qemu-stable@nongnu.org
Fixes: a2260983c6 ("hvf: arm: Add support for GICv3")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240716-pmu-v3-4-8c7c1858a227@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This operation has float16 inputs and thus must use
the FZ16 control not the FZ control.
Cc: qemu-stable@nongnu.org
Fixes: 3916841ac7 ("target/arm: Implement FMOPA, FMOPS (widening)")
Reported-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-3-richard.henderson@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2374
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We made a copy above because the fp exception flags
are not propagated back to the FPST register, but
then failed to use the copy.
Cc: qemu-stable@nongnu.org
Fixes: 558e956c71 ("target/arm: Implement FMOPA, FMOPS (non-widening)")
Signed-off-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-2-richard.henderson@linaro.org
[rth: Split from a larger patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit c1a1f80518 when we added the FEAT_LSE2 relaxations to
the alignment requirements for atomic and ordered loads and stores,
we didn't quite get it right for LDAPR/LDAPRH/LDAPRB with no
immediate offset. These instructions were handled in the old decoder
as part of disas_ldst_atomic(), but unlike all the other insns that
function decoded (LDADD, LDCLR, etc) these insns are "ordered", not
"atomic", so they should be using check_ordered_align() rather than
check_atomic_align(). Commit c1a1f80518 used
check_atomic_align() regardless for everything in
disas_ldst_atomic(). We then carried that incorrect check over in
the decodetree conversion, where LDAPR/LDAPRH/LDAPRB are now handled
by trans_LDAPR().
The effect is that when FEAT_LSE2 is implemented, these instructions
don't honour the SCTLR_ELx.nAA bit and will generate alignment
faults when they should not.
(The LDAPR insns with an immediate offset were in disas_ldst_ldapr_stlr()
and then in trans_LDAPR_i() and trans_STLR_i(), and have always used
the correct check_ordered_align().)
Use check_ordered_align() in trans_LDAPR().
Cc: qemu-stable@nongnu.org
Fixes: c1a1f80518 ("target/arm: Relax ordered/atomic alignment checks for LSE2")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240709134504.3500007-3-peter.maydell@linaro.org
When we converted the LDAPR/STLR instructions to decodetree we
accidentally introduced a regression where the offset is negative.
The 9-bit immediate field is signed, and the old hand decoder
correctly used sextract32() to get it out of the insn word,
but the ldapr_stlr_i pattern in the decode file used "imm:9"
instead of "imm:s9", so it treated the field as unsigned.
Fix the pattern to treat the field as a signed immediate.
Cc: qemu-stable@nongnu.org
Fixes: 2521b6073b ("target/arm: Convert LDAPR/STLR (imm) to decodetree")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2419
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240709134504.3500007-2-peter.maydell@linaro.org
* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when setting vstvec CSR
* Add decode support for Zawrs extension
* Update the KVM regs to Linux 6.10-rc5
* Add smcntrpmf extension support
* Raise an exception when CSRRS/CSRRC writes a read-only CSR
* Re-insert and deprecate 'riscv,delegate' in virt machine device tree
* roms/opensbi: Update to v1.5
-----BEGIN PGP SIGNATURE-----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=pM6B
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.1
* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when setting vstvec CSR
* Add decode support for Zawrs extension
* Update the KVM regs to Linux 6.10-rc5
* Add smcntrpmf extension support
* Raise an exception when CSRRS/CSRRC writes a read-only CSR
* Re-insert and deprecate 'riscv,delegate' in virt machine device tree
* roms/opensbi: Update to v1.5
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmaYeUcACgkQr3yVEwxT
# gBMtdw//U2NbmnmECa0uXuE7fdFul0tUkl2oHb9Cr8g5Se5g/HVFqexAKOFZ8Lcm
# DvTl94zJ2dms4RntcmJHwTIusa+oU6qqOekediotjgpeH4BHZNCOHe0E9hIAHn9F
# uoJ1P186L7VeVr7OFAAgSCE7F6egCk7iC0h8L8/vuL4xcuyfbZ2r7ybiTl1+45N2
# YBBv5/00wsYnyMeqRYYtyqgX9QR017JRqNSfTJSbKxhQM/L1GA1xxisUvIGeyDqc
# Pn8E3dMN6sscR6bPs4RP+SBi0JIlRCgth/jteSUkbYf42osw3/5sl4oK/e6Xiogo
# SjELOF7QJNxE8H6EUIScDaCVB5ZhvELZcuOL2NRdUuVDkjhWXM633HwfEcXkZdFK
# W/H9wOvNxPAJIOGXOpv10+MLmhdyIOZwE0uk6evHvdcTn3FP9DurdUCc1se0zKOA
# Qg/H6usTbLGNQ7KKTNQ6GpQ6u89iE1CIyZqYVvB1YuF5t7vtAmxvNk3SVZ6aq3VL
# lPJW2Zd1eO09Q+kRnBVDV7MV4OJrRNsU+ryd91NrSVo9aLADtyiNC28dCSkjU3Gn
# 6YQZt65zHuhH5IBB/PGIPo7dLRT8KNWOiYVoy3c6p6DC6oXsKIibh0ue1nrVnnVQ
# NRqyxPYaj6P8zzqwTk+iJj36UXZZVtqPIhtRu9MrO6Opl2AbsXI=
# =pM6B
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 12:09:11 PM AEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu: (30 commits)
roms/opensbi: Update to v1.5
hw/riscv/virt.c: re-insert and deprecate 'riscv,delegate'
target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSR
target/riscv: Expose the Smcntrpmf config
target/riscv: Do not setup pmu timer if OF is disabled
target/riscv: More accurately model priv mode filtering.
target/riscv: Start counters from both mhpmcounter and mcountinhibit
target/riscv: Enforce WARL behavior for scounteren/hcounteren
target/riscv: Save counter values during countinhibit update
target/riscv: Implement privilege mode filtering for cycle/instret
target/riscv: Only set INH fields if priv mode is available
target/riscv: Add cycle & instret privilege mode filtering support
target/riscv: Add cycle & instret privilege mode filtering definitions
target/riscv: Add cycle & instret privilege mode filtering properties
target/riscv: Fix the predicate functions for mhpmeventhX CSRs
target/riscv: Combine set_mode and set_virt functions.
target/riscv/kvm: update KVM regs to Linux 6.10-rc5
disas/riscv: Add decode for Zawrs extension
target/riscv: Validate the mode in write_vstvec
disas/riscv: Support zabha disassemble
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Both CSRRS and CSRRC always read the addressed CSR and cause any read side
effects regardless of rs1 and rd fields. Note that if rs1 specifies a register
holding a zero value other than x0, the instruction will still attempt to write
the unmodified value back to the CSR and will cause any attendant side effects.
So if CSRRS or CSRRC tries to write a read-only CSR with rs1 which specifies
a register holding a zero value, an illegal instruction exception should be
raised.
Signed-off-by: Yu-Ming Chang <yumin686@andestech.com>
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <172100444279.18077.6893072378718059541-0@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new config for Smcntrpmf extension so that it can be enabled/
disabled from the qemu commandline.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-13-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The timer is setup function is invoked in both hpmcounter
write and mcountinhibit write path. If the OF bit set, the
LCOFI interrupt is disabled. There is no benefitting in
setting up the qemu timer until LCOFI is cleared to indicate
that interrupts can be fired again.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-12-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In case of programmable counters configured to count inst/cycles
we often end-up with counter not incrementing at all from kernel's
perspective.
For example:
- Kernel configures hpm3 to count instructions and sets hpmcounter
to -10000 and all modes except U mode are inhibited.
- In QEMU we configure a timer to expire after ~10000 instructions.
- Problem is, it's often the case that kernel might not even schedule
Umode task and we hit the timer callback in QEMU.
- In the timer callback we inject the interrupt into kernel, kernel
runs the handler and reads hpmcounter3 value.
- Given QEMU maintains individual counters to count for each privilege
mode, and given umode never ran, the umode counter didn't increment
and QEMU returns same value as was programmed by the kernel when
starting the counter.
- Kernel checks for overflow using previous and current value of the
counter and reprograms the counter given there wasn't an overflow
as per the counter value. (Which itself is a problem. We have QEMU
telling kernel that counter3 overflowed but the counter value
returned by QEMU doesn't seem to reflect that.).
This change makes sure that timer is reprogrammed from the handler
if the counter didn't overflow based on the counter value.
Second, this change makes sure that whenever the counter is read,
it's value is updated to reflect the latest count.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-11-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently we start timer counter from write_mhpmcounter path only
without checking for mcountinhibit bit. This changes adds mcountinhibit
check and also programs the counter from write_mcountinhibit as well.
When a counter is stopped using mcountinhibit we simply update
the value of the counter based on current host ticks and save
it for future reads.
We don't need to disable running timer as pmu_timer_trigger_irq
will discard the interrupt if the counter has been inhibited.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-10-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
scounteren/hcountern are also WARL registers similar to mcountern.
Only set the bits for the available counters during the write to
preserve the WARL behavior.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-9-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, if a counter monitoring cycle/instret is stopped via
mcountinhibit we just update the state while the value is saved
during the next read. This is not accurate as the read may happen
many cycles after the counter is stopped. Ideally, the read should
return the value saved when the counter is stopped.
Thus, save the value of the counter during the inhibit update
operation and return that value during the read if corresponding bit
in mcountihibit is set.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-8-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Privilege mode filtering can also be emulated for cycle/instret by
tracking host_ticks/icount during each privilege mode switch. This
patch implements that for both cycle/instret and mhpmcounters. The
first one requires Smcntrpmf while the other one requires Sscofpmf
to be enabled.
The cycle/instret are still computed using host ticks when icount
is not enabled. Otherwise, they are computed using raw icount which
is more accurate in icount mode.
Co-Developed-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-7-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the INH fields are set in mhpmevent uncoditionally
without checking if a particular priv mode is supported or not.
Suggested-by: Alistair Francis <alistair23@gmail.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-6-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU only calculates dummy cycles and instructions, so there is no
actual means to stop the icount in QEMU. Hence this patch merely adds
the functionality of accessing the cfg registers, and cause no actual
effects on the counting of cycle and instret counters.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-5-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the definitions for ISA extension smcntrpmf.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-4-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the properties for ISA extension smcntrpmf. Patches
implementing it will follow.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-3-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
mhpmeventhX CSRs are available for RV32. The predicate function
should check that first before checking sscofpmf extension.
Fixes: 1466448345 ("target/riscv: Add sscofpmf extension support")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-2-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Combining riscv_cpu_set_virt_enabled() and riscv_cpu_set_mode()
functions. This is to make complete mode change information
available through a single function.
This allows to easily differentiate between HS->VS, VS->HS
and VS->VS transitions when executing state update codes.
For example: One use-case which inspired this change is
to update mode-specific instruction and cycle counters
which requires information of both prev mode and current
mode.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-1-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Two new regs added: ztso and zacas.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709085431.455541-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Base on the riscv-privileged spec, vstvec substitutes for the usual stvec.
Therefore, the encoding of the MODE should also be restricted to 0 and 1.
Signed-off-by: Jiayi Li <lijiayi@eswincomputing.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240701022553.1982-1-lijiayi@eswincomputing.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-11-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-10-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-9-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-8-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-7-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zama16b is the property that misaligned load/stores/atomics within
a naturally aligned 16-byte region are atomic.
According to the specification, Zama16b applies only to AMOs, loads
and stores defined in the base ISAs, and loads and stores of no more
than XLEN bits defined in the F, D, and Q extensions. Thus it should
not apply to zacas or RVC instructions.
For an instruction in that set, if all accessed bytes lie within 16B granule,
the instruction will not raise an exception for reasons of address alignment,
and the instruction will give rise to only one memory operation for the
purposes of RVWMO—i.e., it will execute atomically.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-6-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zcmop defines eight 16-bit MOP instructions named C.MOP.n, where n is
an odd integer between 1 and 15, inclusive. C.MOP.n is encoded in
the reserved encoding space corresponding to C.LUI xn, 0.
Unlike the MOPs defined in the Zimop extension, the C.MOP.n instructions
are defined to not write any register.
In current implementation, C.MOP.n only has an check function, without any
other more behavior.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Message-ID: <20240709113652.1239-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zimop extension defines an encoding space for 40 MOPs.The Zimop
extension defines 32 MOP instructions named MOP.R.n, where n is
an integer between 0 and 31, inclusive. The Zimop extension
additionally defines 8 MOP instructions named MOP.RR.n, where n
is an integer between 0 and 7.
These 40 MOPs initially are defined to simply write zero to x[rd],
but are designed to be redefined by later extensions to perform some
other action.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Message-ID: <20240709113652.1239-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix the superfluous trailing semicolon in target/hexagon/imported/mmvec/
ext.idef.
Cc: Brian Cain <bcain@quicinc.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
=cZhV
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/tcg: fixes for seg_helper.c
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
# TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
# XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
# y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
# Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
# JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
# =cZhV
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 02:34:05 AM AEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386/tcg: save current task state before loading new one
target/i386/tcg: use X86Access for TSS access
target/i386/tcg: check for correct busy state before switching to a new task
target/i386/tcg: Compute MMU index once
target/i386/tcg: Introduce x86_mmu_index_{kernel_,}pl
target/i386/tcg: Reorg push/pop within seg_helper.c
target/i386/tcg: use PUSHL/PUSHW for error code
target/i386/tcg: Allow IRET from user mode to user mode with SMAP
target/i386/tcg: Remove SEG_ADDL
target/i386/tcg: fix POP to memory in long mode
hpet: fix HPET_TN_SETVAL for high 32-bits of the comparator
hpet: fix clamping of period
docs: Update description of 'user=username' for '-run-with'
qemu/timer: Add host ticks function for LoongArch
scsi: fix regression and honor bootindex again for legacy drives
hw/scsi/lsi53c895a: bump instruction limit in scripts processing to fix regression
disas: Fix build against Capstone v6
cpu: Free queued CPU work
Revert "qemu-char: do not operate on sources from finalize callbacks"
i386/sev: Don't allow automatic fallback to legacy KVM_SEV*_INIT
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCGCPUOps::cpu_exec_interrupt hook is currently not mandatory; if
it is left NULL then we treat it as if it had returned false. However
since pretty much every architecture needs to handle interrupts,
almost every target we have provides the hook. The one exception is
Tricore, which doesn't currently implement the architectural
interrupt handling.
Add a "do nothing" implementation of cpu_exec_hook for Tricore,
assert on startup that the CPU does provide the hook, and remove
the runtime NULL check before calling it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240712113949.4146855-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is how the steps are ordered in the manual. EFLAGS.NT is
overwritten after the fact in the saved image.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This takes care of probing the vaddr range in advance, and is also faster
because it avoids repeated TLB lookups. It also matches the Intel manual
better, as it says "Checks that the current (old) TSS, new TSS, and all
segment descriptors used in the task switch are paged into system memory";
note however that it's not clear how the processor checks for segment
descriptors, and this check is not included in the AMD manual.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This step is listed in the Intel manual: "Checks that the new task is available
(call, jump, exception, or interrupt) or busy (IRET return)".
The AMD manual lists the same operation under the "Preventing recursion"
paragraph of "12.3.4 Nesting Tasks", though it is not clear if the processor
checks the busy bit in the IRET case.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the MMU index to the StackAccess struct, so that it can be cached
or (in the next patch) computed from information that is not in
CPUX86State.
Co-developed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Interrupts and call gates should use accesses with the DPL as
the privilege level. While computing the applicable MMU index
is easy, the harder thing is how to plumb it in the code.
One possibility could be to add a single argument to the PUSH* macros
for the privilege level, but this is repetitive and risks confusion
between the involved privilege levels.
Another possibility is to pass both CPL and DPL, and adjusting both
PUSH* and POP* to use specific privilege levels (instead of using
cpu_{ld,st}*_data). This makes the code more symmetric.
However, a more complicated but much nicer approach is to use a structure
to contain the stack parameters, env, unwind return address, and rewrite
the macros into functions. The struct provides an easy home for the MMU
index as well.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240617161210.4639-4-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not pre-decrement esp, let the macros subtract the appropriate
operand size.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a bug wherein i386/tcg assumed an interrupt return using
the IRET instruction was always returning from kernel mode to either
kernel mode or user mode. This assumption is violated when IRET is used
as a clever way to restore thread state, as for example in the dotnet
runtime. There, IRET returns from user mode to user mode.
This bug is that stack accesses from IRET and RETF, as well as accesses
to the parameters in a call gate, are normal data accesses using the
current CPL. This manifested itself as a page fault in the guest Linux
kernel due to SMAP preventing the access.
This bug appears to have been in QEMU since the beginning.
Analyzed-by: Robert R. Henry <rrh.henry@gmail.com>
Co-developed-by: Robert R. Henry <rrh.henry@gmail.com>
Signed-off-by: Robert R. Henry <rrh.henry@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This truncation is now handled by MMU_*32_IDX. The introduction of
MMU_*32_IDX in fact applied correct 32-bit wraparound to 16-bit accesses
with a high segment base (e.g. big real mode or vm86 mode), which did
not use SEG_ADDL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240617161210.4639-3-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In long mode, POP to memory will write a full 64-bit value. However,
the call to gen_writeback() in gen_POP will use MO_32 because the
decoding table is incorrect.
The bug was latent until commit aea49fbb01 ("target/i386: use gen_writeback()
within gen_POP()", 2024-06-08), and then became visible because gen_op_st_v
now receives op->ot instead of the "ot" returned by gen_pop_T0.
Analyzed-by: Clément Chigot <chigot@adacore.com>
Fixes: 5e9e21bcc4 ("target/i386: move 60-BF opcodes to new decoder", 2024-05-07)
Tested-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently if the 'legacy-vm-type' property of the sev-guest object is
'on', QEMU will attempt to use the newer KVM_SEV_INIT2 kernel
interface in conjunction with the newer KVM_X86_SEV_VM and
KVM_X86_SEV_ES_VM KVM VM types.
This can lead to measurement changes if, for instance, an SEV guest was
created on a host that originally had an older kernel that didn't
support KVM_SEV_INIT2, but is booted on the same host later on after the
host kernel was upgraded.
Instead, if legacy-vm-type is 'off', QEMU should fail if the
KVM_SEV_INIT2 interface is not provided by the current host kernel.
Modify the fallback handling accordingly.
In the future, VMSA features and other flags might be added to QEMU
which will require legacy-vm-type to be 'off' because they will rely
on the newer KVM_SEV_INIT2 interface. It may be difficult to convey to
users what values of legacy-vm-type are compatible with which
features/options, so as part of this rework, switch legacy-vm-type to a
tri-state OnOffAuto option. 'auto' in this case will automatically
switch to using the newer KVM_SEV_INIT2, but only if it is required to
make use of new VMSA features or other options only available via
KVM_SEV_INIT2.
Defining 'auto' in this way would avoid inadvertantly breaking
compatibility with older kernels since it would only be used in cases
where users opt into newer features that are only available via
KVM_SEV_INIT2 and newer kernels, and provide better default behavior
than the legacy-vm-type=off behavior that was previously in place, so
make it the default for 9.1+ machine types.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
cc: kvm@vger.kernel.org
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240710041005.83720-1-michael.roth@amd.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We set the value of register CSR_PRCFG3, but left out CSR_PRCFG1
and CSR_PRCFG2. Set CSR_PRCFG1 and CSR_PRCFG2 according to the
default values of the physical machine.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240705021839.1004374-1-gaosong@loongson.cn>
Since srai.w is a valid instruction on la32, remove the avail_64 check
and simplify trans_srai_w().
Fixes: c0c0461e3a ("target/loongarch: Add avail_64 to check la64-only instructions")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Feiyang Chen <chris.chenfeiyang@gmail.com>
Message-Id: <20240628033357.50027-1-chris.chenfeiyang@gmail.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
With KVM virtualization, debug exception is injected to guest kernel
rather than host for normal break intruction. Here hypercall
instruction with special code is used for sw breakpoint usage,
and detailed instruction comes from kvm kernel with user API
KVM_REG_LOONGARCH_DEBUG_INST.
Now only software breakpoint is supported, and it is allowed to
insert/remove software breakpoint. We can debug guest kernel with gdb
method after kernel is loaded, hardware breakpoint will be added in later.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240607035016.2975799-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240709000610.382391-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240709000610.382391-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240709000610.382391-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240709000610.382391-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240709000610.382391-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240709000610.382391-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the TCGCPUOps::cpu_exec_halt method is optional, and if it
is not set then the default is to call the CPUClass::has_work
method (which has an identical function signature).
We would like to make the cpu_exec_halt method mandatory so we can
remove the runtime check and fallback handling. In preparation for
that, make all the targets which don't need special handling in their
cpu_exec_halt set it to their cpu_has_work implementation instead of
leaving it unset. (This is every target except for arm and i386.)
In the riscv case this requires us to make the function not
be local to the source file it's defined in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In commit a96edb687e we set the cpu_exec_halt field of the
TCGCPUOps arm_tcg_ops to arm_cpu_exec_halt(), but we left the
arm_v7m_tcg_ops struct unchanged. That isn't wrong, because for
M-profile FEAT_WFxT doesn't exist and the default handling for "no
cpu_exec_halt method" is correct, but it's perhaps a little
confusing. We would also like to make setting the cpu_exec_halt
method mandatory.
Initialize arm_v7m_tcg_ops cpu_exec_halt to the same function we use
for A-profile. (On M-profile we never set up the wfxt timer so there
is no change in behaviour here.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In a completely artifical memset benchmark object_dynamic_cast_assert
dominates the profile, even above guest address resolution and
the underlying host memset.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240702154911.1667418-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to allow FPCR bits that aren't in the FPSCR (like the new
bits that are defined for FEAT_AFP), we need to make sure that writes
to the FPSCR only write to the bits of FPCR that are architecturally
mapped, and not the others.
Implement this with a new function vfp_set_fpcr_masked() which
takes a mask of which bits to update.
(We could do the same for FPSR, but we leave that until we actually
are likely to need it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-10-peter.maydell@linaro.org
Now that we store FPSR and FPCR separately, the FPSR_MASK and
FPCR_MASK macros are slightly confusingly named and the comment
describing them is out of date. Rename them to FPSCR_FPSR_MASK and
FPSCR_FPCR_MASK, document that they are the mask of which FPSCR bits
are architecturally mapped to which AArch64 register, and define them
symbolically rather than as hex values. (This latter requires
defining some extra macros for bits which we haven't previously
defined.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-9-peter.maydell@linaro.org
The QC, N, Z, C, V bits live in the FPSR, not the FPCR. Rename the
macros that define these bits accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-8-peter.maydell@linaro.org
Now that we have refactored the set/get functions so that the FPSCR
format is no longer the authoritative one, we can keep FPSR and FPCR
in separate CPU state fields.
As well as the get and set functions, we also have a scattering of
places in the code which directly access vfp.xregs[ARM_VFP_FPSCR] to
extract single fields which are stored there. These all change to
directly access either vfp.fpsr or vfp.fpcr, depending on the
location of the field. (Most commonly, this is the NZCV flags.)
We make the field in the CPU state struct 64 bits, because
architecturally FPSR and FPCR are 64 bits. However we leave the
types of the arguments and return values of the get/set functions as
32 bits, since we don't need to make that change with the current
architecture and various callsites would be unable to handle
set bits in the high half (for instance the gdbstub protocol
assumes they're only 32 bit registers).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-7-peter.maydell@linaro.org
We already have a load_cpu_field_low32() to load the low half of a
64-bit CPU struct field to a TCGv_i32; however we haven't yet needed
the store equivalent. We'll want that in the next patch, so
implement it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-6-peter.maydell@linaro.org
