cpu->cfg.mvendorid is a 32 bit field and kvm_set_one_reg() always write
a target_ulong val, i.e. a 64 bit field in a 64 bit host.
Given that we're passing a pointer to the mvendorid field, the reg is
reading 64 bits starting from mvendorid and going 32 bits in the next
field, marchid. Here's an example:
$ ./qemu-system-riscv64 -machine virt,accel=kvm -m 2G -smp 1 \
-cpu rv64,marchid=0xab,mvendorid=0xcd,mimpid=0xef(...)
(inside the guest)
# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdc_zicbom_zicboz_zihintpause_zbb_sstc
mmu : sv57
mvendorid : 0xab000000cd
marchid : 0xab
mimpid : 0xef
'mvendorid' was written as a combination of 0xab (the value from the
adjacent field, marchid) and its intended value 0xcd.
Fix it by assigning cpu->cfg.mvendorid to a target_ulong var 'reg' and
use it as input for kvm_set_one_reg(). Here's the result with this patch
applied and using the same QEMU command line:
# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdc_zicbom_zicboz_zihintpause_zbb_sstc
mmu : sv57
mvendorid : 0xcd
marchid : 0xab
mimpid : 0xef
This bug affects only the generic (rv64) CPUs when running with KVM in a
64 bit env since the 'host' CPU does not allow the machine IDs to be
changed via command line.
Fixes: 1fb5a622f7 ("target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230802180058.281385-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The previous check was failing with:
VLEN=128 ELEN = 64 SEW = 16 and LMUL = 1/8 which is a
valid combination.
Fix the check to allow valid combinations when VLEN is a multiple of
ELEN.
From the specification:
"In general, the requirement is to support LMUL ≥ SEWMIN/ELEN, where
SEWMIN is the narrowest supported SEW value and ELEN is the widest
supported SEW value. In the standard extensions, SEWMIN=8. For standard
vector extensions with ELEN=32, fractional LMULs of 1/2 and 1/4 must be
supported. For standard vector extensions with ELEN=64, fractional LMULs
of 1/2, 1/4, and 1/8 must be supported." Elsewhere in the specification
it makes clear that VLEN>=ELEN.
From inspection this new check allows:
VLEN=ELEN=64 1/2, 1/4, 1/8 for SEW >=8
VLEN=ELEN=32 1/2, 1/4 for SEW >=8
Fixes: d9b7609a1f ("target/riscv: rvv-1.0: configure instructions")
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230718131316.12283-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit bd30559568 made changes in how we're checking and disabling
extensions based on env->priv_ver. One of the changes was to move the
extension disablement code to the end of realize(), being able to
disable extensions after we've auto-enabled some of them.
An unfortunate side effect of this change started to happen with CPUs
that has an older priv version, like sifive-u54. Starting on commit
2288a5ce43 we're auto-enabling zca, zcd and zcf if RVC is enabled,
but these extensions are priv version 1.12.0. When running a cpu that
has an older priv ver (like sifive-u54) the user is spammed with
warnings like these:
qemu-system-riscv64: warning: disabling zca extension for hart 0x0000000000000000 because privilege spec version does not match
qemu-system-riscv64: warning: disabling zcd extension for hart 0x0000000000000000 because privilege spec version does not match
The warnings are part of the code that disables the extension, but in this
case we're throwing user warnings for stuff that we enabled on our own,
without user intervention. Users are left wondering what they did wrong.
A quick 8.1 fix for this nuisance is to check the CPU priv spec before
auto-enabling zca/zcd/zcf. A more appropriate fix will include a more
robust framework that will account for both priv_ver and user choice
when auto-enabling/disabling extensions, but for 8.1 we'll make it do
with this simple check.
It's also worth noticing that this is the only case where we're
auto-enabling extensions based on a criteria (in this case RVC) that
doesn't match the priv spec of the extensions we're enabling. There's no
need for more 8.1 band-aids.
Cc: Conor Dooley <conor@kernel.org>
Fixes: 2288a5ce43 ("target/riscv: add cfg properties for Zc* extension")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20230717154141.60898-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Replace the 0/-1 result with true/false.
Invert the sense of the test of all callers.
Document the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-25-richard.henderson@linaro.org>
This patch introduces the RISC-V Zfa extension, which introduces
additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of float register bigger than XLEN
* Quiet comparison instructions (fleq/fltq)
Zfa defines its instructions in combination with the following extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
Since QEMU does not support the RISC-V quad-precision floating-point
ISA extension (Q), this patch does not include the instructions that
depend on this extension. All other instructions are included in this
patch.
The Zfa specification can be found here:
https://github.com/riscv/riscv-isa-manual/blob/master/src/zfa.tex
The Zfa specifciation is frozen and is in public review since May 3, 2023:
https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/SED4ntBkabg
The patch also includes a TCG test for the fcvtmod.w.d instruction.
The test cases test for correct results and flag behaviour.
Note, that the Zfa specification requires fcvtmod's flag behaviour
to be identical to a fcvt with the same operands (which is also
tested).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230710071243.282464-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If we don't set a proper cbom_blocksize|cboz_blocksize in the FDT the
Linux Kernel will fail to detect the availability of the CBOM/CBOZ
extensions, regardless of the contents of the 'riscv,isa' DT prop.
The FDT is being written using the cpu->cfg.cbom|z_blocksize attributes,
so let's expose them as user properties like it is already done with
TCG.
This will also require us to determine proper blocksize values during
init() time since the FDT is already created during realize(). We'll
take a ride in kvm_riscv_init_multiext_cfg() to do it. Note that we
don't need to fetch both cbom and cboz blocksizes every time: check for
their parent extensions (icbom and icboz) and only read the blocksizes
if needed.
In contrast with cbom|z_blocksize properties from TCG, the user is not
able to set any value that is different from the 'host' value when
running KVM. KVM can be particularly harsh dealing with it: a ENOTSUPP
can be thrown for the mere attempt of executing kvm_set_one_reg() for
these 2 regs.
Hopefully we don't need to call kvm_set_one_reg() for these regs.
We'll check if the user input matches the host value in
kvm_cpu_set_cbomz_blksize(), the set() accessor for both blocksize
properties. We'll fail fast since it's already known to not be
supported.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-21-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are 2 places in which we need to get a pointer to a certain
property of the cpu->cfg struct based on property offset. Next patch
will add a couple more.
Create a helper to avoid repeating this code over and over.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're now ready to update the multi-letter extensions status for KVM.
kvm_riscv_update_cpu_cfg_isa_ext() is called called during vcpu creation
time to verify which user options changes host defaults (via the 'user_set'
flag) and tries to write them back to KVM.
Failure to commit a change to KVM is only ignored in case KVM doesn't
know about the extension (-EINVAL error code) and the user wanted to
disable the given extension. Otherwise we're going to abort the boot
process.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM-specific properties are being created inside target/riscv/kvm.c. But
at this moment we're gathering all the remaining properties from TCG and
adding them as is when running KVM. This creates a situation where
non-KVM properties are setting flags to 'true' due to its default
settings (e.g. Zawrs). Users can also freely enable them via command
line.
This doesn't impact runtime per se because KVM doesn't care about these
flags, but code such as riscv_isa_string_ext() take those flags into
account. The result is that, for a KVM guest, setting non-KVM properties
will make them appear in the riscv,isa DT.
We want to keep the same API for both TCG and KVM and at the same time,
when running KVM, forbid non-KVM extensions to be enabled internally. We
accomplish both by changing riscv_cpu_add_user_properties() to add a
mock boolean property for every non-KVM extension in
riscv_cpu_extensions[]. Then, when running KVM, users are still free to
set extensions at will, but we'll error out if a non-KVM extension is
enabled. Setting such extension to 'false' will be ignored.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_isa_string_ext() is being used by riscv_isa_string(), which is
then used by boards to retrieve the 'riscv,isa' string to be written in
the FDT. All this happens after riscv_cpu_realize(), meaning that we're
already past riscv_cpu_validate_set_extensions() and, more important,
riscv_cpu_disable_priv_spec_isa_exts().
This means that all extensions that needed to be disabled due to
priv_spec mismatch are already disabled. Checking this again during
riscv_isa_string_ext() is unneeded. Remove it.
As a bonus, riscv_isa_string_ext() can now be used with the 'host'
KVM-only CPU type since it doesn't have a env->priv_ver assigned and it
would fail this check for no good reason.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_cpu_add_user_properties() ended up with an excess of "#ifndef
CONFIG_USER_ONLY" blocks after changes that added KVM properties
handling.
KVM specific properties are required to be created earlier than their
TCG counterparts, but the remaining props can be created at any order.
Move riscv_add_satp_mode_properties() to the start of the function,
inside the !CONFIG_USER_ONLY block already present there, to remove the
last ifndef block.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Let's add KVM user properties for the multi-letter extensions that KVM
currently supports: zicbom, zicboz, zihintpause, zbb, ssaia, sstc,
svinval and svpbmt.
As with MISA extensions, we're using the KVMCPUConfig type to hold
information about the state of each extension. However, multi-letter
extensions have more cases to cover than MISA extensions, so we're
adding an extra 'supported' flag as well. This flag will reflect if a
given extension is supported by KVM, i.e. KVM knows how to handle it.
This is determined during KVM extension discovery in
kvm_riscv_init_multiext_cfg(), where we test for EINVAL errors. Any
other error will cause an abort.
The use of the 'user_set' is similar to what we already do with MISA
extensions: the flag set only if the user is changing the extension
state.
The 'supported' flag will be used later on to make an exception for
users that are disabling multi-letter extensions that are unknown to
KVM.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20230706101738.460804-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Our design philosophy with KVM properties can be resumed in two main
decisions based on KVM interface availability and what the user wants to
do:
- if the user disables an extension that the host KVM module doesn't
know about (i.e. it doesn't implement the kvm_get_one_reg() interface),
keep booting the CPU. This will avoid users having to deal with issues
with older KVM versions while disabling features they don't care;
- for any other case we're going to error out immediately. If the user
wants to enable a feature that KVM doesn't know about this a problem that
is worth aborting - the user must know that the feature wasn't enabled
in the hart. Likewise, if KVM knows about the extension, the user wants
to enable/disable it, and we fail to do it so, that's also a problem we
can't shrug it off.
In the case of MISA bits we won't even try enabling bits that aren't
already available in the host. The ioctl() is so likely to fail that
it's not worth trying. This check is already done in the previous patch,
in kvm_cpu_set_misa_ext_cfg(), thus we don't need to worry about it now.
In kvm_riscv_update_cpu_misa_ext() we'll go through every potential user
option and do as follows:
- if the user didn't set the property or set to the same value of the
host, do nothing;
- Disable the given extension in KVM. Error out if anything goes wrong.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using all TCG user properties in KVM is tricky. First because KVM
supports only a small subset of what TCG provides, so most of the
cpu->cfg flags do nothing for KVM.
Second, and more important, we don't have a way of telling if any given
value is an user input or not. For TCG this has a small impact since we
just validating everything and error out if needed. But for KVM it would
be good to know if a given value was set by the user or if it's a value
already provided by KVM. Otherwise we don't know how to handle failed
kvm_set_one_regs() when writing the configurations back.
These characteristics make it overly complicated to use the same user
facing flags for both KVM and TCG. A simpler approach is to create KVM
specific properties that have specialized logic, forking KVM and TCG use
cases for those cases only. Fully separating KVM/TCG properties is
unneeded at this point - in fact we want the user experience to be as
equal as possible, regardless of the acceleration chosen.
We'll start this fork with the MISA properties, adding the MISA bits
that the KVM driver currently supports. A new KVMCPUConfig type is
introduced. It'll hold general information about an extension. For MISA
extensions we're going to use the newly created getters of
misa_ext_infos[] to populate their name and description. 'offset' holds
the MISA bit (RVA, RVC, ...). We're calling it 'offset' instead of
'misa_bit' because this same KVMCPUConfig struct will be used to
multi-letter extensions later on.
This new type also holds a 'user_set' flag. This flag will be set when
the user set an option that's different than what is already configured
in the host, requiring KVM intervention to write the regs back during
kvm_arch_init_vcpu(). Similar mechanics will be implemented for
multi-letter extensions as well.
There is no need to duplicate more code than necessary, so we're going
to use the existing kvm_riscv_init_user_properties() to add the KVM
specific properties. Any code that is adding a TCG user prop is then
changed slightly to verify first if there's a KVM prop with the same
name already added.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Next patch will add KVM specific user properties for both MISA and
multi-letter extensions. For MISA extensions we want to make use of what
is already available in misa_ext_cfgs[] to avoid code repetition.
misa_ext_info_arr[] array will hold name and description for each MISA
extension that misa_ext_cfgs[] is declaring. We'll then use this new
array in KVM code to avoid duplicating strings. Two getters were added
to allow KVM to retrieve the 'name' and 'description' for each MISA
property.
There's nothing holding us back from doing the same with multi-letter
extensions. For now doing just with MISA extensions is enough.
It is worth documenting that even using the __bultin_ctz() directive to
populate the misa_ext_info_arr[] we are forced to assign 'name' and
'description' during runtime in riscv_cpu_add_misa_properties(). The
reason is that some Gitlab runners ('clang-user' and 'tsan-build') will
throw errors like this if we fetch 'name' and 'description' from the
array in the MISA_CFG() macro:
../target/riscv/cpu.c:1624:5: error: initializer element is not a
compile-time constant
MISA_CFG(RVA, true),
^~~~~~~~~~~~~~~~~~~
../target/riscv/cpu.c:1619:53: note: expanded from macro 'MISA_CFG'
{.name = misa_ext_info_arr[MISA_INFO_IDX(_bit)].name, \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
gcc and others compilers/builders were fine with that change. We can't
ignore failures in the Gitlab pipeline though, so code was changed to
make every runner happy.
As a side effect, misa_ext_cfg[] is no longer a 'const' array because
it must be set during runtime.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At this moment we're retrieving env->misa_ext during
kvm_arch_init_cpu(), leaving env->misa_ext_mask behind.
We want to set env->misa_ext_mask, and we want to set it as early as
possible. The reason is that we're going to use it in the validation
process of the KVM MISA properties we're going to add next. Setting it
during arch_init_cpu() is too late for user validation.
Move the code to a new helper that is going to be called during init()
time, via kvm_riscv_init_user_properties(), like we're already doing for
the machine ID properties. Set both misa_ext and misa_ext_mask to the
same value retrieved by the 'isa' config reg.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After changing user validation for mvendorid/marchid/mimpid to guarantee
that the value is validated on user input time, coupled with the work in
fetching KVM default values for them by using a scratch CPU, we're
certain that the values in cpu->cfg.(mvendorid|marchid|mimpid) are
already good to be written back to KVM.
There's no need to write the values back for 'host' type CPUs since the
values can't be changed, so let's do that just for generic CPUs.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Allow 'marchid' and 'mimpid' to also be initialized in
kvm_riscv_init_machine_ids().
After this change, the handling of mvendorid/marchid/mimpid for the
'host' CPU type will be equal to what we already have for TCG named
CPUs, i.e. the user is not able to set these values to a different val
than the one that is already preset.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Certain validations, such as the validations done for the machine IDs
(mvendorid/marchid/mimpid), are done before starting the CPU.
Non-dynamic (named) CPUs tries to match user input with a preset
default. As it is today we can't prefetch a KVM default for these cases
because we're only able to read/write KVM regs after the vcpu is
spinning.
Our target/arm friends use a concept called "scratch CPU", which
consists of creating a vcpu for doing queries and validations and so on,
which is discarded shortly after use [1]. This is a suitable solution
for what we need so let's implement it in target/riscv as well.
kvm_riscv_init_machine_ids() will be used to do any pre-launch setup for
KVM CPUs, via riscv_cpu_add_user_properties(). The function will create
a KVM scratch CPU, fetch KVM regs that work as default values for user
properties, and then discard the scratch CPU afterwards.
We're starting by initializing 'mvendorid'. This concept will be used to
init other KVM specific properties in the next patches as well.
[1] target/arm/kvm.c, kvm_arm_create_scratch_host_vcpu()
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'marchid' shouldn't be set to a different value as previously set for
named CPUs.
For all other CPUs it shouldn't be freely set either - the spec requires
that 'marchid' can't have the MSB (most significant bit) set and every
other bit set to zero, i.e. 0x80000000 is an invalid 'marchid' value for
32 bit CPUs.
As with 'mimpid', setting a default value based on the current QEMU
version is not a good idea because it implies that the CPU
implementation changes from one QEMU version to the other. Named CPUs
should set 'marchid' to a meaningful value instead, and generic CPUs can
set to any valid value.
For the 'veyron-v1' CPU this is the error thrown if 'marchid' is set to
a different val:
$ ./build/qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,marchid=0x80000000
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.marchid=0x80000000:
Unable to change veyron-v1-riscv-cpu marchid (0x8000000000010000)
And, for generics CPUs, this is the error when trying to set to an
invalid val:
$ ./build/qemu-system-riscv64 -M virt -nographic -cpu rv64,marchid=0x8000000000000000
qemu-system-riscv64: can't apply global rv64-riscv-cpu.marchid=0x8000000000000000:
Unable to set marchid with MSB (64) bit set and the remaining bits zero
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Following the same logic used with 'mvendorid' let's also restrict
'mimpid' for named CPUs. Generic CPUs keep setting the value freely.
Note that we're getting rid of the default RISCV_CPU_MARCHID value. The
reason is that this is not a good default since it's dynamic, changing
with with every QEMU version, regardless of whether the actual
implementation of the CPU changed from one QEMU version to the other.
Named CPU should set it to a meaningful value instead and generic CPUs
can set whatever they want.
This is the error thrown for an invalid 'mimpid' value for the veyron-v1
CPU:
$ ./qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,mimpid=2
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.mimpid=2:
Unable to change veyron-v1-riscv-cpu mimpid (0x111)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're going to change the handling of mvendorid/marchid/mimpid by the
KVM driver. Since these are always present in all CPUs let's put the
same validation for everyone.
It doesn't make sense to allow 'mvendorid' to be different than it
is already set in named (vendor) CPUs. Generic (dynamic) CPUs can have
any 'mvendorid' they want.
Change 'mvendorid' to be a class property created via
'object_class_property_add', instead of using the DEFINE_PROP_UINT32()
macro. This allow us to define a custom setter for it that will verify,
for named CPUs, if mvendorid is different than it is already set by the
CPU. This is the error thrown for the 'veyron-v1' CPU if 'mvendorid' is
set to an invalid value:
$ qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,mvendorid=2
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.mvendorid=2:
Unable to change veyron-v1-riscv-cpu mvendorid (0x61f)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As it is today it's not possible to use '-cpu host' if the RISC-V host
has RVH enabled. This is the resulting error:
$ ./qemu/build/qemu-system-riscv64 \
-machine virt,accel=kvm -m 2G -smp 1 \
-nographic -snapshot -kernel ./guest_imgs/Image \
-initrd ./guest_imgs/rootfs_kvm_riscv64.img \
-append "earlycon=sbi root=/dev/ram rw" \
-cpu host
qemu-system-riscv64: H extension requires priv spec 1.12.0
This happens because we're checking for priv spec for all CPUs, and
since we're not setting env->priv_ver for the 'host' CPU, it's being
default to zero (i.e. PRIV_SPEC_1_10_0).
In reality env->priv_ver does not make sense when running with the KVM
'host' CPU. It's used to gate certain CSRs/extensions during translation
to make them unavailable if the hart declares an older spec version. It
doesn't have any other use. E.g. OpenSBI version 1.2 retrieves the spec
checking if the CSR_MCOUNTEREN, CSR_MCOUNTINHIBIT and CSR_MENVCFG CSRs
are available [1].
'priv_ver' is just one example. We're doing a lot of feature validation
and setup during riscv_cpu_realize() that it doesn't apply to KVM CPUs.
Validating the feature set for those CPUs is a KVM problem that should
be handled in KVM specific code.
The new riscv_cpu_realize_tcg() helper contains all validation logic that
are applicable to TCG CPUs only. riscv_cpu_realize() verifies if we're
running TCG and, if it's the case, proceed with the usual TCG realize()
logic.
[1] lib/sbi/sbi_hart.c, hart_detect_features()
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Should set/get riscv all reg timer,i.e, time/compare/frequency/state.
Signed-off-by: Yang Zhang <yang.zhang@hexintek.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1688
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230707032306.4606-1-gaoshanliukou@163.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The privileged spec states:
For a memory access made to support VS-stage address translation (such as
to read/write a VS-level page table), permissions are checked as though
for a load or store, not for the original access type. However, any
exception is always reported for the original access type (instruction,
load, or store/AMO).
The current implementation converts the access type to LOAD if implicit
G-stage translation fails which results in only reporting "Load guest-page
fault". This commit removes the convertion of access type, so the reported
exception conforms to the spec.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627074915.7686-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230615063302.102409-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add trans_* and helper function for Zvfbfwma instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add trans_* and helper function for Zvfbfmin instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add trans_* and helper function for Zfbfmin instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Print RvV extension register to log if VPU option is enabled.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230629083730.386604-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Pointer mask is also affected by MPRV which means cur_pmbase/pmmask
should also take MPRV into consideration. As pointer mask for instruction
is not supported currently, so we can directly update cur_pmbase/pmmask
based on address related mode and xlen affected by MPRV now.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230614032547.35895-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As specified in privilege spec:"When MPRV=1, load and store memory
addresses are treated as though the current XLEN were set to MPP’s
XLEN". So the xlen for address may be different from current xlen.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230614032547.35895-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 7f0bdfb5bf ("target/riscv/cpu.c: remove cfg setup from
riscv_cpu_init()") removed code that was enabling mmu, pmp, ext_ifencei
and ext_icsr from riscv_cpu_init(), the init() function of
TYPE_RISCV_CPU, parent type of all RISC-V CPUss. This was done to force
CPUs to explictly enable all extensions and features it requires,
without any 'magic values' that were inherited by the parent type.
This commit failed to make appropriate changes in the 'veyron-v1' CPU,
added earlier by commit e1d084a852. The result is that the veyron-v1
CPU has ext_ifencei, ext_icsr and pmp set to 'false', which is not the
case.
The reason why it took this long to notice (thanks LIU Zhiwei for
reporting it) is because Linux doesn't mind 'ifencei' and 'icsr' being
absent in the 'riscv,isa' DT, implying that they're both present if the
'i' extension is enabled. OpenSBI also doesn't error out or warns about
the lack of 'pmp', it'll just not protect memory pages.
Fix it by setting them to 'true' in rv64_veyron_v1_cpu_init() like
7f0bdfb5bf already did with other CPUs.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Fixes: 7f0bdfb5bf ("target/riscv/cpu.c: remove cfg setup from riscv_cpu_init()")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230620152443.137079-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SXL is initialized as env->misa_mxl which is also the mxl value.
So we can just remain it unchanged to keep it read-only.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
MPV and GVA bits are added by hypervisor extension to mstatus
and mstatush (if MXLEN=32).
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upon MRET or explicit memory access with MPRV=1, MPV should be ignored
when MPP=PRV_M.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Support for emulating XThead* instruction has been added recently.
This patch adds support for these instructions to the RISC-V disassembler.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-9-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch moves the extension test functions that are used
to gate vendor extension decoders, into cpu_cfg.h.
This allows to reuse them in the disassembler.
This patch does not introduce new functionality.
However, the patch includes a small change:
The parameter for the extension test functions has been changed
from 'DisasContext*' to 'const RISCVCPUConfig*' to keep
the code in cpu_cfg.h self-contained.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230612111034.3955227-3-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Disassemble function(plugin_disas, target_disas, monitor_disas) will
always call set_disas_info before disassembling instructions.
plugin_disas and target_disas will always be called under a TB, which
has the same XLEN.
We can't ensure that monitor_disas will always be called under a TB,
but current XLEN will still be a better choice, thus we can ensure at
least the disassemble of the nearest one TB is right.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-2-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This implements the AES64DSM instruction. This was the last use
of aes64_operation and its support macros, so remove them all.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64ESM instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64IM instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64DS instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64ES instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These fields shouldn't be accessed when KVM is not available.
Restrict the KVM timer migration state. Rename the KVM timer
post_load() handler accordingly, because cpu_post_load() is
too generic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230626232007.8933-3-philmd@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On an address match, skip checking for default permissions and return error
based on access defined in PMP configuration.
v3 Changes:
o Removed explicit return of boolean value from comparision
of priv/allowed_priv
v2 Changes:
o Removed goto to return in place when address matches
o Call pmp_hart_has_privs_default at the end of the loop
Fixes: 90b1fafce0 ("target/riscv: Smepmp: Skip applying default rules when address matches")
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230605164548.715336-1-hchauhan@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 752614cab8 ("target/riscv: rvv: Add tail agnostic for vector
load / store instructions") added an extra check for LMUL fragmentation,
intended for setting the "rest tail elements" in the last register for a
segment load insn.
Actually, the max_elements derived in vext_ld*() won't be a fraction of
vector register size, since the lmul encoded in desc is emul, which has
already been adjusted to 1 for LMUL fragmentation case by vext_get_emul()
in trans_rvv.c.inc, for ld_stride(), ld_us(), ld_index() and ldff().
Besides, vext_get_emul() has also taken EEW/SEW into consideration, so no
need to call vext_get_total_elems() which would base on the emul to derive
another emul, the second emul would be incorrect when esz differs from sew.
Thus this patch removes the check for extra tail elements.
Fixes: 752614cab8 ("target/riscv: rvv: Add tail agnostic for vector load / store instructions")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230607091646.4049428-1-xiao.w.wang@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There's no code using MTYPE, which was a concept used in older vector
implementation.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230608053517.4102648-1-xiao.w.wang@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We initialize cur_pmmask as -1(UINT32_MAX/UINT64_MAX) and regard it
as if pointer mask is disabled in current implementation. However,
the addresses for vector load/store will be adjusted to zero in this
case and -1(UINT32_MAX/UINT64_MAX) is valid value for pmmask when
pointer mask is enabled.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230610094651.43786-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
pc_succ_insn is no longer useful after the introduce of cur_insn_len
and all pc related value use diff value instead of absolute value.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-8-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a base pc_save for PC-relative translation(CF_PCREL).
Diable the directly sync pc from tb by riscv_cpu_synchronize_from_tb.
Use gen_pc_plus_diff to get the pc-relative address.
Enable CF_PCREL in System mode.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reduce reliance on absolute values by using true pc difference for
gen_pc_plus_diff() to prepare for PC-relative translation.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reduce reliance on absolute values(by passing pc difference) to
prepare for PC-relative translation.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reduce reliance on absolute value to prepare for PC-relative translation.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use cur_insn_len to store the length of the current instruction to
prepare for PC-relative translation.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Compute the target address before storing it into badaddr
when mis-aligned exception is triggered.
Use a target_pc temp to store the target address to avoid
the confusing operation that udpate target address into
cpu_pc before misalign check, then update it into badaddr
and restore cpu_pc to current pc if exception is triggered.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230526072124.298466-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Pass RISCVCPUConfig as disassemble_info.target_info to support disas
of conflict instructions related to specific extensions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Split RISCVCPUConfig declarations to prepare for passing it to disas.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230523093539.203909-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add knobs to allow users to enable smstateen and also export it via the
ISA extension string.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230518175058.2772506-4-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When misa.F is 0 tb->flags.FS field is unused and can be used to save
the current state of smstateen0.FCSR check which is needed by the
floating point translation routines.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230518175058.2772506-3-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implement the s/h/mstateen.fcsr bit as defined in the smstateen spec
and check for it when accessing the fcsr register and its fields.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230518175058.2772506-2-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
write_mstatus() can only change current xl when in debug mode.
And we need update cur_pmmask/base in this case.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230524015933.17349-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Access will fail if access is partially inside the PMP entry.
However,only setting ret = false doesn't really mean pmp violation
since pmp_hart_has_privs_default() may return true at the end of
pmp_hart_has_privs().
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-13-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use pmp_update_rule_addr() and pmp_update_rule_nums() separately to
update rule nums only once for each pmpcfg_csr_write. Then remove
pmp_update_rule() since it become unused.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-12-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
TLB needn't be flushed when pmpcfg/pmpaddr don't changes.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230517091519.34439-11-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
TLB should be flushed not only for pmpcfg csr changes, but also for
pmpaddr csr changes.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230517091519.34439-10-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently only the rule addr of the same index of pmpaddr is updated
when pmpaddr CSR is modified. However, the rule addr of next PMP entry
may also be affected if its A field is PMP_AMATCH_TOR. So we should
also update it in this case.
Write to pmpaddr CSR will not affect the rule nums, So we needn't update
call pmp_update_rule_nums() in pmpaddr_csr_write().
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-9-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
MMWP and MML bits may affect the allowed privs of PMP entries and the
default privs, both of which may change the allowed privs of exsited
TLB entries. So we need flush TLB when they are changed.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-8-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The addr and size parameters in pmp_hart_has_privs_default() are unused.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RLB/MML/MMWP bits in mseccfg CSR are introduced by Smepmp extension.
So they can only be writable and set to 1s when cfg.epmp is true.
Then we also need't check on epmp in pmp_hart_has_privs_default().
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We no longer need the pmp_index for matched PMP entry now.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Return the result directly for short cut, since We needn't do the
following check on the PMP entries if there is no PMP rules.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
pmp_get_tlb_size can be separated from get_physical_address_pmp and is only
needed when ret == TRANSLATE_SUCCESS.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
PMP entries before (including) the matched PMP entry may only cover partial
of the TLB page, and this may split the page into regions with different
permissions. Such as for PMP0 (0x80000008~0x8000000F, R) and PMP1 (0x80000000~
0x80000FFF, RWX), write access to 0x80000000 will match PMP1. However we cannot
cache the translation result in the TLB since this will make the write access
to 0x80000008 bypass the check of PMP0. So we should check all of them instead
of the matched PMP entry in pmp_get_tlb_size() and set the tlb_size to 1 in
this case.
Set tlb_size to TARGET_PAGE_SIZE if PMP is not support or there is no PMP rules.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517091519.34439-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
write_misa() must use as much common logic as possible. We want to open
code just the bits that are exclusive to the CSR write operation and TCG
internals.
Our validation is done with riscv_cpu_validate_set_extensions(), but we
need a small tweak first. When enabling RVG we're doing:
env->misa_ext |= RVI | RVM | RVA | RVF | RVD;
env->misa_ext_mask = env->misa_ext;
This works fine for realize() time but this can potentially overwrite
env->misa_ext_mask if we reutilize the function for write_misa().
Instead of doing misa_ext_mask = misa_ext, sum up the RVG extensions in
misa_ext_mask as well. This won't change realize() time behavior
(misa_ext_mask will be == misa_ext) and will ensure that write_misa()
won't change misa_ext_mask by accident.
After that, rewrite write_misa() to work as follows:
- mask the write using misa_ext_mask to avoid enabling unsupported
extensions;
- suppress RVC if the next insn isn't aligned;
- disable RVG if any of RVG dependencies are being disabled by the user;
- assign env->misa_ext and run riscv_cpu_validate_set_extensions(). On
error, rollback env->misa_ext to its original value, logging a
GUEST_ERROR to inform the user about the failed write;
- handle RVF and MSTATUS_FS and continue as usual.
Let's keep write_misa() as experimental for now until this logic gains
enough mileage.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230517135714.211809-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have 4 config settings being done in riscv_cpu_init(): ext_ifencei,
ext_icsr, mmu and pmp. This is also the constructor of the "riscv-cpu"
device, which happens to be the parent device of every RISC-V cpu.
The result is that these 4 configs are being set every time, and every
other CPU should always account for them. CPUs such as sifive_e need to
disable settings that aren't enabled simply because the parent class
happens to be enabling it.
Moving all configurations from the parent class to each CPU will
centralize the config of each CPU into its own init(), which is clearer
than having to account to whatever happens to be set in the parent
device. These settings are also being set in register_cpu_props() when
no 'misa_ext' is set, so for these CPUs we don't need changes. Named
CPUs will receive all cfgs that the parent were setting into their
init().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is no need to init timers if we're not even sure that our
extensions are valid. Execute riscv_cpu_validate_set_extensions() before
riscv_timer_init().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Let's remove more code that is open coded in riscv_cpu_realize() and put
it into a helper. Let's also add an error message instead of just
asserting out if env->misa_mxl_max != env->misa_mlx.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're doing env->priv_spec validation and assignment at the start of
riscv_cpu_realize(), which is fine, but then we're doing a force disable
on extensions that aren't compatible with the priv version.
This second step is being done too early. The disabled extensions might be
re-enabled again in riscv_cpu_validate_set_extensions() by accident. A
better place to put this code is at the end of
riscv_cpu_validate_set_extensions() after all the validations are
completed.
Add a new helper, riscv_cpu_disable_priv_spec_isa_exts(), to disable the
extesions after the validation is done. While we're at it, create a
riscv_cpu_validate_priv_spec() helper to host all env->priv_spec related
validation to unclog riscv_cpu_realize a bit.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Even though Zca/Zcf/Zcd can be included by C/F/D, however, their priv
version is higher than the priv version of C/F/D. So if we use check
for them instead of check for C/F/D totally, it will trigger new
problem when we try to disable the extensions based on the configured
priv version.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using implicitly enabled extensions such as Zca/Zcf/Zcd instead of their
super extensions can simplify the extension related check. However, they
may have higher priv version than their super extensions. So we should mask
them in the isa_string based on priv version to make them invisible to user
if the specified priv version is lower than their minimal priv version.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All these generic CPUs are using the latest priv available, at this
moment PRIV_VERSION_1_12_0:
- riscv_any_cpu_init()
- rv32_base_cpu_init()
- rv64_base_cpu_init()
- rv128_base_cpu_init()
Create a new PRIV_VERSION_LATEST enum and use it in those cases. I'll
make it easier to update everything at once when a new priv version is
available.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The setter is doing nothing special. Just set env->priv_ver directly.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This setter is doing nothing else but setting env->vext_ver. Assign the
value directly.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RVV verification will error out if fails and it's being done at the
end of riscv_cpu_validate_set_extensions(), after we've already set some
extensions that are dependent on RVV. Let's put it in its own function
and do it earlier.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zc* extensions (version 1.0) are ratified.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230510030040.20528-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The function is a no-op if 'vta' is zero but we're still doing a lot of
stuff in this function regardless. vext_set_elems_1s() will ignore every
single time (since vta is zero) and we just wasted time.
Skip it altogether in this case. Aside from the code simplification
there's a noticeable emulation performance gain by doing it. For a
regular C binary that does a vectors operation like this:
=======
#define SZ 10000000
int main ()
{
int *a = malloc (SZ * sizeof (int));
int *b = malloc (SZ * sizeof (int));
int *c = malloc (SZ * sizeof (int));
for (int i = 0; i < SZ; i++)
c[i] = a[i] + b[i];
return c[SZ - 1];
}
=======
Emulating it with qemu-riscv64 and RVV takes ~0.3 sec:
$ time ~/work/qemu/build/qemu-riscv64 \
-cpu rv64,debug=false,vext_spec=v1.0,v=true,vlen=128 ./foo.out
real 0m0.303s
user 0m0.281s
sys 0m0.023s
With this skip we take ~0.275 sec:
$ time ~/work/qemu/build/qemu-riscv64 \
-cpu rv64,debug=false,vext_spec=v1.0,v=true,vlen=128 ./foo.out
real 0m0.274s
user 0m0.252s
sys 0m0.019s
This performance gain adds up fast when executing heavy benchmarks like
SPEC.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230427205708.246679-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move a use of TARGET_LONG_BITS out of tcg/tcg.h.
Include the new file only where required.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a virtual CPU for Ventana's first CPU named veyron-v1. It runs
exclusively for the rv64 target. It's tested with the 'virt' board.
CPU specs and general information can be found here:
https://www.nextplatform.com/2023/02/02/the-first-risc-v-shot-across-the-datacenter-bow/
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230418123624.16414-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the specification, in 64-bit, if any of the pte reserved bits
60-54 is set an exception should be triggered (see 4.4.1, "Addressing and
Memory Protection"). In addition, we must check the napot/pbmt bits are
not set if those extensions are not active.
Reported-by: Andrea Parri <andrea@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230420150220.60919-1-alexghiti@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Before changing the flow check for sv39/48/57.
According to specification (for Supervisor mode):
Sv39 implementations support a 39-bit virtual address space, divided into 4 KiB
pages.
Instruction fetch addresses and load and store effective addresses, which are
64 bits,
must have bits 63–39 all equal to bit 38, or else a page-fault exception will
occur.
Likewise for Sv48 and Sv57.
So the high bits are equal to bit 38 for sv39.
According to specification (for Hypervisor mode):
For Sv39x4, address bits of the guest physical address 63:41 must all be zeros,
or else a
guest-page-fault exception occurs.
Likewise for Sv48x4 and Sv57x4.
For Sv48x4 address bits 63:50 must all be zeros, or else a guest-page-fault
exception occurs.
For Sv57x4 address bits 63:59 must all be zeros, or else a guest-page-fault
exception occurs.
For example we are trying to access address 0xffff_ffff_ff01_0000 with only
G-translation enabled.
So expected behavior is to generate exception. But qemu doesn't generate such
exception.
For the old check, we get
va_bits == 41, mask == (1 << 24) - 1, masked_msbs == (0xffff_ffff_ff01_0000 >>
40) & mask == mask.
Accordingly, the condition masked_msbs != 0 && masked_msbs != mask is not
fulfilled
and the check passes.
Signed-off-by: Irina Ryapolova <irina.ryapolova@syntacore.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230418075423.26217-1-irina.ryapolova@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When reading a non-existent CSR QEMU should raise illegal instruction
exception, but currently it just exits due to the g_assert() check.
This actually reverts commit 0ee342256a.
Some comments are also added to indicate that predicate() must be
provided for an implemented CSR.
Reported-by: Fei Wu <fei2.wu@intel.com>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230417043054.3125614-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This new abstract type will be used to differentiate between static and
non-static CPUs in query-cpu-definitions.
All generic CPUs were changed to be of this type. Named CPUs are kept as
TYPE_RISCV_CPU and will still be considered static.
This is the output of query-cpu-definitions after this change for the
riscv64 target:
$ ./build/qemu-system-riscv64 -S -M virt -display none -qmp stdio
{"QMP": {"version": (...)}
{"execute": "qmp_capabilities", "arguments": {"enable": ["oob"]}}
{"return": {}}
{"execute": "query-cpu-definitions"}
{"return": [
{"name": "rv64", "typename": "rv64-riscv-cpu", "static": false, "deprecated": false},
{"name": "sifive-e51", "typename": "sifive-e51-riscv-cpu", "static": true, "deprecated": false},
{"name": "any", "typename": "any-riscv-cpu", "static": false, "deprecated": false},
{"name": "x-rv128", "typename": "x-rv128-riscv-cpu", "static": false, "deprecated": false},
{"name": "shakti-c", "typename": "shakti-c-riscv-cpu", "static": true, "deprecated": false},
{"name": "thead-c906", "typename": "thead-c906-riscv-cpu", "static": true, "deprecated": false},
{"name": "sifive-u54", "typename": "sifive-u54-riscv-cpu", "static": true, "deprecated": false}
]}
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230411183511.189632-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This command is used by tooling like libvirt to retrieve a list of
supported CPUs. Each entry returns a CpuDefinitionInfo object that
contains more information about each CPU.
This initial support includes only the name of the CPU and its typename.
Here's what the command produces for the riscv64 target:
$ ./build/qemu-system-riscv64 -S -M virt -display none -qmp stdio
{"QMP": {"version": (...)}
{"execute": "qmp_capabilities", "arguments": {"enable": ["oob"]}}
{"return": {}}
{"execute": "query-cpu-definitions"}
{"return": [
{"name": "rv64", "typename": "rv64-riscv-cpu", "static": false, "deprecated": false},
{"name": "sifive-e51", "typename": "sifive-e51-riscv-cpu", "static": false, "deprecated": false},
{"name": "any", "typename": "any-riscv-cpu", "static": false, "deprecated": false},
{"name": "x-rv128", "typename": "x-rv128-riscv-cpu", "static": false, "deprecated": false},
{"name": "shakti-c", "typename": "shakti-c-riscv-cpu", "static": false, "deprecated": false},
{"name": "thead-c906", "typename": "thead-c906-riscv-cpu", "static": false, "deprecated": false},
{"name": "sifive-u54", "typename": "sifive-u54-riscv-cpu", "static": false, "deprecated": false}]
}
Next patch will introduce a way to tell whether a given CPU is static or
not.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230411183511.189632-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QMP CPU commands are usually implemented by a separated file,
<arch>-qmp-cmds.c, to allow them to be build only for softmmu targets.
This file uses a CPU QOM header with basic QOM declarations for the
arch.
We'll introduce query-cpu-definitions for RISC-V CPUs in the next patch,
but first we need a cpu-qom.h header with the definitions of
TYPE_RISCV_CPU and RISCVCPUClass declarations. These were moved from
cpu.h to the new file, and cpu.h now includes "cpu-qom.h".
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230411183511.189632-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implement this by adjusting prot, which reduces the set of
checks required. This prevents exec to be set for U pages
in MMUIdx_S_SUM. While it had been technically incorrect,
it did not manifest as a bug, because we will never attempt
to execute from MMUIdx_S_SUM.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-26-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-26-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We were effectively computing the protection bits twice,
once while performing access checks and once while returning
the valid bits to the caller. Reorg so we do this once.
Move the computation of mxr close to its single use.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-25-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-25-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-24-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-24-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If we want to give the debugger a greater view of memory than
the cpu, we should simply disable the access check entirely,
not simply for this one corner case.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-23-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-23-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The debugger should not modify PTE_A or PTE_D.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-22-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-22-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the code that never loops outside of the loop.
Unchain the if-return-else statements.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-21-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-21-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These values are constant for every level of pte lookup.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-20-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-20-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the check from the top of get_physical_address to
the two callers, where passing mmu_idx makes no sense.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-19-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-19-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Table 9.5 "Effect of MPRV..." specifies that MPV=1 uses VS-level
vsstatus.SUM instead of HS-level sstatus.SUM.
For HLV/HSV instructions, the HS-level register does not apply, but
the VS-level register presumably does, though this is not mentioned
explicitly in the manual. However, it matches the behavior for MPV.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-18-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-18-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Incorporate the virt_enabled and MPV checks into the cpu_mmu_index
function, so we don't have to keep doing it within tlb_fill and
subroutines. This also elides a flush on changes to MPV.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-17-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-17-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current cpu_mmu_index value is really irrelevant to
the HLV/HSV lookup. Provide the correct priv level directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-16-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-16-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move and rename riscv_cpu_two_stage_lookup, to match
the other mmuidx_* functions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-15-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-15-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the priv level encoded into the mmu_idx, rather than
starting from env->priv. We have already checked MPRV+MPP
in riscv_cpu_mmu_index -- no need to repeat that.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-14-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-14-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In get_physical_address, we should use the setting passed
via mmu_idx rather than checking env->mstatus directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-13-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-13-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We will enable more uses of this bit in the future.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-12-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-12-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implement these instructions via helpers, in expectation
of determining the mmu_idx to use at runtime. This allows
the permission check to also be moved out of line, which
allows HLSX to be removed from TB_FLAGS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the new functions to properly check execute permission
for the read rather than read permission.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-10-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-10-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Kernel needs to access user mode memory e.g. during syscalls, the window
is usually opened up for a very limited time through MSTATUS.SUM, the
overhead is too much if tlb_flush() gets called for every SUM change.
This patch creates a separate MMU index for S+SUM, so that it's not
necessary to flush tlb anymore when SUM changes. This is similar to how
ARM handles Privileged Access Never (PAN).
Result of 'pipe 10' from unixbench boosts from 223656 to 1705006. Many
other syscalls benefit a lot from this too.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Message-Id: <20230324054154.414846-3-fei2.wu@intel.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-8-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-8-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently it's assumed the 2 low bits of mmu_idx map to privilege mode,
this assumption won't last as we are about to add more mmu_idx. Here an
individual priv field is added into TB_FLAGS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Message-Id: <20230324054154.414846-2-fei2.wu@intel.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-7-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-7-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Once we mistook the vstart directly from the env->vstart. As env->vstart is not
a constant, we should record it in the tb flags if we want to use
it in translation.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230324143031.1093-5-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-6-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-6-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Merge with mstatus_{fs,vs}. We might perform a redundant
assignment to one or the other field, but it's a trivial
and saves 4 bits from TB_FLAGS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-5-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-5-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reuse the MSTATUS_FS and MSTATUS_VS for the tb flags positions is not a
normal way.
It will make it hard to change the tb flags layout. And even worse, if we
want to keep tb flags for a same extension togather without a hole.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230324143031.1093-4-zhiwei_liu@linux.alibaba.com>
[rth: Adjust trans_rvf.c.inc as well; use the typedef]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-4-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-4-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The pointer masking is the only extension that directly use status.
The vector or float extension uses the status in an indirect way.
Replace the pointer masking extension special status fields with
the general status.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230324143031.1093-3-zhiwei_liu@linux.alibaba.com>
[rth: Add a typedef for the enum]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-3-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Virt enabled state is not a constant, so we should put it into tb flags.
Thus we can use it like a constant condition at translation phase.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230324143031.1093-2-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-2-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- Trap satp/hgatp accesses from HS-mode when MSTATUS.TVM is enabled.
- Trap satp accesses from VS-mode when HSTATUS.VTVM is enabled.
- Raise RISCV_EXCP_ILLEGAL_INST when U-mode executes SFENCE.VMA/SINVAL.VMA.
- Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes
SFENCE.VMA/SINVAL.VMA or VS-mode executes SFENCE.VMA/SINVAL.VMA with
HSTATUS.VTVM enabled.
- Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes
HFENCE.GVMA/HFENCE.VVMA/HINVAL.GVMA/HINVAL.VVMA.
Signed-off-by: Yi Chen <chenyi2000@zju.edu.cn>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406101559.39632-1-chenyi2000@zju.edu.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zdinx/Zhinx{min} require Zfinx. And require relationship is usually done
by check currently.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230408135908.25269-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
mstatus.MPP field is a WARL field since priv version 1.11, so we
remain it unchanged if an invalid value is written into it. And
after this, RVH shouldn't be passed to riscv_cpu_set_mode().
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230407014743.18779-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
PRV_H has no real meaning, but just a reserved privilege mode currently.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230407014743.18779-3-liweiwei@iscas.ac.cn>
[ Changes by AF:
- Convert one missing use of PRV_H
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The MPP will be set to the least-privileged supported mode (U if
U-mode is implemented, else M).
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230407014743.18779-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The function is now a no-op for all cpu_init() callers that are setting
a non-zero misa value in set_misa(), since it's no longer used to sync
cpu->cfg props with env->misa_ext bits. Remove it in those cases.
While we're at it, rename the function to match what it's actually
doing: create user properties to set/remove CPU extensions. Make a note
that it will overwrite env->misa_ext with the defaults set by each user
property.
Update the MISA bits comment in cpu.h as well.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-21-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're still have one RISCVCPUConfig MISA flag, 'ext_g'. We'll remove it
the same way we did with the others: create a "g" RISCVCPUMisaExtConfig
property, remove the old "g" property, remove all instances of 'cfg.ext_g'
and use riscv_has_ext(env, RVG).
The caveat is that we don't have RVG, so add it. RVG will be used right
off the bat in set_misa() of rv64_thead_c906_cpu_init() because the CPU is
enabling G via the now removed 'ext_g' flag.
After this patch, there are no more MISA extensions represented by flags
in RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This CPU is enabling G via cfg.ext_g and, at the same time, setting
IMAFD in set_misa() and cfg.ext_icsr.
riscv_cpu_validate_set_extensions() is already doing that, so there's no
need for cpu_init() setups to worry about setting G and its extensions.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This function was created to move the sync between cpu->cfg.ext_N bit
changes to env->misa_ext* from the validation step to an ealier step,
giving us a guarantee that we could use either cpu->cfg.ext_N or
riscv_has_ext(env,N) in the validation.
We don't have any cpu->cfg.ext_N left that has an existing MISA bit
(cfg.ext_g will be handled shortly). The function is now a no-op, simply
copying the existing values of misa_ext* back to misa_ext*.
Remove it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "v" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVV. Instances of cpu->cfg.ext_v and similar are
replaced with riscv_has_ext(env, RVV).
Remove the old "v" property and 'ext_v' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "j" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVJ. Instances of cpu->cfg.ext_j and similar are
replaced with riscv_has_ext(env, RVJ).
Remove the old "j" property and 'ext_j' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "h" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVH. Instances of cpu->cfg.ext_h and similar are
replaced with riscv_has_ext(env, RVH).
Remove the old "h" property and 'ext_h' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "u" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVU. Instances of cpu->cfg.ext_u and similar are
replaced with riscv_has_ext(env, RVU).
Remove the old "u" property and 'ext_u' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "s" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVS. Instances of cpu->cfg.ext_s and similar are
replaced with riscv_has_ext(env, RVS).
Remove the old "s" property and 'ext_s' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "m" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVM. Instances of cpu->cfg.ext_m and similar are
replaced with riscv_has_ext(env, RVM).
Remove the old "m" property and 'ext_m' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "e" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVE. Instances of cpu->cfg.ext_e and similar are
replaced with riscv_has_ext(env, RVE).
Remove the old "e" property and 'ext_e' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "i" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVI. Instances of cpu->cfg.ext_i and similar are
replaced with riscv_has_ext(env, RVI).
Remove the old "i" property and 'ext_i' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "f" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVF. Instances of cpu->cfg.ext_f and similar are
replaced with riscv_has_ext(env, RVF).
Remove the old "f" property and 'ext_f' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "d" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVD. Instances of cpu->cfg.ext_d and similar are
replaced with riscv_has_ext(env, RVD).
Remove the old "d" property and 'ext_d' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "c" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVC. Instances of cpu->cfg.ext_c and similar are
replaced with riscv_has_ext(env, RVC).
Remove the old "c" property and 'ext_c' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "a" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVA. Instances of cpu->cfg.ext_a and similar are
replaced with riscv_has_ext(env, RVA).
Remove the old "a" property and 'ext_a' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Ever since RISCVCPUConfig got introduced users are able to set CPU extensions
in the command line. User settings are reflected in the cpu->cfg object
for later use. These properties are used in the target/riscv/cpu.c code,
most notably in riscv_cpu_validate_set_extensions(), where most of our
realize time validations are made.
And then there's env->misa_ext, the field where the MISA extensions are
set, that is read everywhere else. We need to keep env->misa_ext updated
with cpu->cfg settings, since our validations rely on it, forcing us to
make register_cpu_props() write cpu->cfg.ext_N flags to cover for named
CPUs that aren't used named properties but also needs to go through the
same validation steps. Failing to so will make those name CPUs fail
validation (see c66ffcd535 for more info). Not only that, but we also
need to sync env->misa_ext with cpu->cfg again during realize() time to
catch any change the user might have done, since the rest of the code
relies on that.
Making cpu->cfg.ext_N and env->misa_ext reflect each other is not
needed. What we want is a way for users to enable/disable MISA extensions,
and there's nothing stopping us from letting the user write env->misa_ext
directly. Here are the artifacts that will enable us to do that:
- RISCVCPUMisaExtConfig will declare each MISA property;
- cpu_set_misa_ext_cfg() is the setter for each property. We'll write
env->misa_ext and env->misa_ext_mask with the appropriate misa_bit;
cutting off cpu->cfg.ext_N from the logic;
- cpu_get_misa_ext_cfg() is a getter that will retrieve the current val
of the property based on env->misa_ext;
- riscv_cpu_add_misa_properties() will be called in register_cpu_props()
to init all MISA properties from the misa_ext_cfgs[] array.
With this infrastructure we'll start to get rid of each cpu->cfg.ext_N
attribute in the next patches.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We don't have MISA extensions in isa_edata_arr[] anymore. Remove the
redundant 'multi_letter' field from isa_ext_data.
Suggested-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The code that disables extensions if there's a priv version mismatch
uses cpu->cfg.ext_N properties to do its job.
We're aiming to not rely on cpu->cfg.ext_N props for MISA bits. Split
the MISA related verifications in a new function, removing it from
isa_edata_arr[].
We're also erroring it out instead of disabling, making the cpu_init()
function responsible for running an adequate priv spec for the MISA
extensions it wants to use.
Note that the RVV verification is being ignored since we're always have
at least PRIV_VERSION_1_10_0.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When riscv_cpu_realize() starts we're guaranteed to have cpu->cfg.ext_N
properties updated. The same can't be said about env->misa_ext*, since
the user might enable/disable MISA extensions in the command line, and
env->misa_ext* won't caught these changes. The current solution is to
sync everything at the end of validate_set_extensions(), checking every
cpu->cfg.ext_N value to do a set_misa() in the end.
The last change we're making in the MISA cfg flags are in the G
extension logic, enabling IMAFG if cpu->cfg_ext.g is enabled. Otherwise
we're not making any changes in MISA bits ever since realize() starts.
There's no reason to postpone misa_ext updates until the end of the
validation. Let's do it earlier, during realize(), in a new helper
called riscv_cpu_sync_misa_cfg(). If cpu->cfg.ext_g is enabled, do it
again by updating env->misa_ext* directly.
This is a pre-requisite to allow riscv_cpu_validate_set_extensions() to
use riscv_has_ext() instead of cpu->cfg.ext_N to validate the MISA
extensions, which is our end goal here.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix lines with over 80 characters for both code and comments.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230405085813.40643-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix formats for multi-lines comments.
Add spaces around single line comments(after "/*" and before "*/").
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230405085813.40643-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix identation problems, and try to use the same indentation strategy
in the same file.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230405085813.40643-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Directly use env->virt_enabled instead.
Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230405085813.40643-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
decode_save_opc() will not work for generate_exception(), since 0 is passed
to riscv_raise_exception() as pc in helper_raise_exception(), and bins will
not be restored in this case.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230330034636.44585-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Function get_physical_address() translates both virtual address and
guest physical address, and the latter is 34-bits for Sv32x4. So we
should use vaddr type for 'addr' parameter.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230329101928.83856-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove redundant parentheses in get_physical_address.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230327080858.39703-8-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently we only use the env->virt to encode the virtual mode enabled
status. Let's make it a bool type.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230325145348.1208-1-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230327080858.39703-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In current implementation, riscv_cpu_set_virt_enabled is only called when
RVH is enabled.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230327080858.39703-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since env->virt.VIRT_ONOFF is initialized as false, and will not be set
to true when RVH is disabled, so we can just return this bit(false) when
RVH is not disabled.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230327080858.39703-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Check on riscv_cpu_virt_enabled contains the check on RVH.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230327080858.39703-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The assignment is done under the condition riscv_cpu_virt_enabled()=true.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230327080858.39703-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When I boot a ubuntu image, QEMU output a "Bad icount read" message and exit.
The reason is that when execute helper_mret or helper_sret, it will
cause a call to icount_get_raw_locked (), which needs set can_do_io flag
on cpustate.
Thus we setting this flag when execute these two instructions.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230324064011.976-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add and expose property for Zce:
* Specifying Zce without F includes Zca, Zcb, Zcmp, Zcmt.
* Specifying Zce with F includes Zca, Zcb, Zcmp, Zcmt and Zcf.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-11-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add encode, trans* functions and helper functions support for Zcmt
instrutions.
Add support for jvt csr.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-8-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add encode, trans* functions for Zcmp instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add encode and trans* functions support for Zcb instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Separate c_fld/c_fsd from fld/fsd to add additional check for
c.fld{sp}/c.fsd{sp} which is useful for zcmp/zcmt to reuse
their encodings.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Separate c_flw/c_fsw from flw/fsw to add check for Zcf extension.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Modify the check for C extension to Zca (C implies Zca).
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20230307081403.61950-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add properties for Zca,Zcb,Zcf,Zcd,Zcmp,Zcmt extension.
Add check for these properties.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
dt-validate complains:
> soc: pmu: {'riscv,event-to-mhpmcounters':
> [[1, 1, 524281], [2, 2, 524284], [65561, 65561, 524280],
> [65563, 65563, 524280], [65569, 65569, 524280], [0, 0, 0], [0, 0]],
> pmu: riscv,event-to-mhpmcounters:6: [0, 0] is too short
There are bogus 0 entries added at the end, of which one is of
insufficient length. This happens because only 15 of
fdt_event_ctr_map[]'s 20 elements are populated & qemu_fdt_setprop() is
called using the size of the array.
Reduce the array to 15 elements to make the error go away.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230404173333.35179-1-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zicond standard extension implements the same instruction
semantics as XVentanaCondOps, although using different mnemonics and
opcodes.
Point XVentanaCondOps to the (newly implemented) Zicond implementation
to reduce the future maintenance burden.
Also updating MAINTAINERS as trans_xventanacondops.c.inc.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307180708.302867-3-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After the original Zicond support was stuck/fell through the cracks on
the mailing list at v3 (and a different implementation was merged in
the meanwhile), we need to refactor Zicond to prepare it to be reused
by XVentanaCondOps.
This commit lifts the common logic out into gen_czero and uses this
via gen_logic and 2 helper functions (effectively partial closures).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307180708.302867-2-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove RISCVCPU argument, and get cfg infomation from CPURISCVState
directly.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230309071329.45932-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use CPURISCVState as argument directly in riscv_cpu_update_mip and
riscv_timer_write_timecmp, since type converts from CPURISCVState to
RISCVCPU in many caller of them and then back to CPURISCVState in them.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230309071329.45932-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use env_archcpu() to get RISCVCPU pointer from env directly.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230309071329.45932-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector implicitly enables zve64d, zve64f, zve32f sub extensions. As vector
only requires PRIV_1_10_0, these sub extensions should not require priv version
higher than that.
The same for Zfh.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230321043415.754-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use riscv_cpu_cfg(env) instead of env_archcpu().cfg.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230309071329.45932-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230306175230.7110-17-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These inline helpers are all used by target specific code so move them
out of the general header so we don't needlessly pollute the rest of
the API with target specific stuff.
Note we have to include cpu.h in semihosting as it was relying on a
side effect before.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-21-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-21-richard.henderson@linaro.org>
This aids subsystems (like gdbstub) that want to trigger a flush
without pulling target specific headers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>
* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been updated to version 1.2, see
<https://github.com/riscv-software-src/opensbi/releases/tag/v1.2> for
the release notes.
* Support for setting the virtual address width (ie, sv39/sv48/sv57) on
the command line.
* Support for ACPI on RISC-V.
-----BEGIN PGP SIGNATURE-----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=5gAt
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu into staging
Sixth RISC-V PR for 8.0
* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been updated to version 1.2, see
<https://github.com/riscv-software-src/opensbi/releases/tag/v1.2> for
the release notes.
* Support for setting the virtual address width (ie, sv39/sv48/sv57) on
the command line.
* Support for ACPI on RISC-V.
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmQGYGgTHHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYidmyEAC6FEMbbFM5D++qR6w6xM6hXgzcrev6
# s1kyRRNVa45uSA78ti/Zi0hsDLNf7ZsNPndF0OIkkO5iAE0OVm3LU7tV1TqKcT82
# Dd9VXxe93zEmfnuJazHrMa54SXPhhnNdWHtKlZ6vBfZpbxgx0FFs50xkCsrM5LQZ
# hYHxQUqPWQTvF2MdDHrxCuLcdKl+Wg3ysCcgRh2d049KUBrIu6vNaHC2+AGRjCbj
# BkrGCkB82fTmVJjzAcVWQxLoAV12pCbJS4og1GtP8hA7WevtB39tbPin9siBKRZp
# QBeiIsg0nebkpmZGrb+xWVwlIBNe9yYwJa0KmveQk8v7L5RIzjM1mtDL91VrVljC
# KC2tfT570m0Iq2NoFMb3wd/kESHFzVDM/g+XYqRd4KSoiCNP/RbqYNQBwbMc31Tr
# E27xfA1D8w2vem0Rk20x3KgPf1Z5OmGXjq6YObTpnAzG8cZlA37qKBP+ortt5aHX
# GZSg3CAwknHHVajd4aaegkPsHxm1tRvoTfh38MwkPSNxaA9GD0nz0k9xaYDmeZ2L
# olfanNsaQEwcVUId31+7sAENg1TZU0fnj879/nxkMUCazVTdL8/mz+IoTTx0QCST
# 3+9ATWcyJUlmjbDKIs7kr1L+wJdvvHEJggPAbbPI8ekpXaLZvUYOT6ObzYKNAmwY
# wELQBn8QKXcLVA==
# =5gAt
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Mar 2023 21:51:36 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu: (22 commits)
MAINTAINERS: Add entry for RISC-V ACPI
hw/riscv/virt.c: Initialize the ACPI tables
hw/riscv/virt: virt-acpi-build.c: Add RHCT Table
hw/riscv/virt: virt-acpi-build.c: Add RINTC in MADT
hw/riscv/virt: Enable basic ACPI infrastructure
hw/riscv/virt: Add memmap pointer to RiscVVirtState
hw/riscv/virt: Add a switch to disable ACPI
hw/riscv/virt: Add OEM_ID and OEM_TABLE_ID fields
riscv: Correctly set the device-tree entry 'mmu-type'
riscv: Introduce satp mode hw capabilities
riscv: Allow user to set the satp mode
riscv: Change type of valid_vm_1_10_[32|64] to bool
riscv: Pass Object to register_cpu_props instead of DeviceState
roms/opensbi: Upgrade from v1.1 to v1.2
gitlab/opensbi: Move to docker:stable
hw: intc: Use cpu_by_arch_id to fetch CPU state
target/riscv: cpu: Implement get_arch_id callback
disas/riscv Fix ctzw disassemble
hw/riscv/virt.c: add cbo[mz]-block-size fdt properties
target/riscv: add Zicbop cbo.prefetch{i, r, m} placeholder
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, the max satp mode is set with the only constraint that it must be
implemented in QEMU, i.e. set in valid_vm_1_10_[32|64].
But we actually need to add another level of constraint: what the hw is
actually capable of, because currently, a linux booting on a sifive-u54
boots in sv57 mode which is incompatible with the cpu's sv39 max
capability.
So add a new bitmap to RISCVSATPMap which contains this capability and
initialize it in every XXX_cpu_init.
Finally:
- valid_vm_1_10_[32|64] constrains which satp mode the CPU can use
- the CPU hw capabilities constrains what the user may select
- the user's selection then constrains what's available to the guest
OS.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230303131252.892893-5-alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V specifies multiple sizes for addressable memory and Linux probes for
the machine's support at startup via the satp CSR register (done in
csr.c:validate_vm).
As per the specification, sv64 must support sv57, which in turn must
support sv48...etc. So we can restrict machine support by simply setting the
"highest" supported mode and the bare mode is always supported.
You can set the satp mode using the new properties "sv32", "sv39", "sv48",
"sv57" and "sv64" as follows:
-cpu rv64,sv57=on # Linux will boot using sv57 scheme
-cpu rv64,sv39=on # Linux will boot using sv39 scheme
-cpu rv64,sv57=off # Linux will boot using sv48 scheme
-cpu rv64 # Linux will boot using sv57 scheme by default
We take the highest level set by the user:
-cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme
We make sure that invalid configurations are rejected:
-cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are
# enabled
We accept "redundant" configurations:
-cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme
And contradictory configurations:
-cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme
Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com>
Signed-off-by: Ludovic Henry <ludovic@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This array is actually used as a boolean so swap its current char type
to a boolean and at the same time, change the type of validate_vm to
bool since it returns valid_vm_1_10_[32|64].
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230303131252.892893-3-alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
One can extract the DeviceState pointer from the Object pointer, so pass
the Object for future commits to access other fields of Object.
No functional changes intended.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-ID: <20230303131252.892893-2-alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Implement the callback for getting the architecture-dependent CPU ID ie
mhartid.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230303065055.915652-2-mchitale@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
All uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries,
therefore there's no need to record temps for later freeing.
Replace the few uses with tcg_temp_new.
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries,
therefore there's no need to record temps for later freeing.
Replace the few uses with tcg_temp_new_i64.
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cmo.prefetch instructions are nops for QEMU (no emulation of the
memory hierarchy, no illegal instructions, no permission faults, no
traps).
Add a comment noting where they would be decoded in case cbo.prefetch
instructions become relevant in the future.
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-5-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Zicbom is the Cache-Block Management extension defined in the already
ratified RISC-V Base Cache Management Operation (CBO) ISA extension [1].
The extension contains three instructions: cbo.clean, cbo.flush and
cbo.inval. All of them must be implemented in the same group as LQ and
cbo.zero due to overlapping patterns.
All these instructions can throw a Illegal Instruction/Virtual
Instruction exception, similar to the existing cbo.zero. The same
check_zicbo_envcfg() is used to handle these exceptions.
Aside from that, these instructions also need to handle page faults and
guest page faults. This is done in a new check_zicbom_access() helper.
As with Zicboz, the cache block size for Zicbom is also configurable.
Note that the spec determines that Zicbo[mp] and Zicboz can have
different cache sizes (Section 2.7 of [1]), so we also include a
'cbom_blocksize' to go along with the existing 'cboz_blocksize'. They
are set to the same size, so unless users want to play around with the
settings both sizes will be the same.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224132536.552293-4-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The RISC-V base cache management operation (CBO) ISA extension has been
ratified. It defines three extensions: Cache-Block Management, Cache-Block
Prefetch and Cache-Block Zero. More information about the spec can be
found at [1].
Let's start by implementing the Cache-Block Zero extension, Zicboz. It
uses the cbo.zero instruction that, as with all CBO instructions that
will be added later, needs to be implemented in an overlap group with
the LQ instruction due to overlapping patterns.
cbo.zero throws a Illegal Instruction/Virtual Instruction exception
depending on CSR state. This is also the case for the remaining cbo
instructions we're going to add next, so create a check_zicbo_envcfg()
that will be used by all Zicbo[mz] instructions.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Experimantal support for writable misa.
* Support for Svadu extension.
* Support for the Zicond extension.
* Fixes to gdbstub, CSR accesses, dependencies between the various
floating-point exceptions, and XTheadMemPair.
* Many cleanups.
-----BEGIN PGP SIGNATURE-----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=FMkl
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230303' of https://gitlab.com/palmer-dabbelt/qemu into staging
Fifth RISC-V PR for QEMU 8.0
* Experimantal support for writable misa.
* Support for Svadu extension.
* Support for the Zicond extension.
* Fixes to gdbstub, CSR accesses, dependencies between the various
floating-point exceptions, and XTheadMemPair.
* Many cleanups.
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmQBrrUTHHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYicHrD/9dHBDOYNwyT/C2Q31NHMcEsVN6J0kW
# 0sVyDb2/TUFoXmClMwS6jZYQQwWD7tjjB7BDcvPJ0QKLblDoZFX5JyxpQypIKWcs
# It/E6mk7aG0epH1GoB/mbHFDbeCm4tbo7Vf6cQGpV/vGWBUaOS67c5nenUK7Tlqw
# NTr9qak+9NYVswvMHZ0lUKtO12W1g/1EVkict2/90P2snWbPZ+foWomifGNljmhy
# 5WtCNp27uBKF/uuD9xubLOxSEcqtZFTuKJy7U3azV4I0IKfd6Is83Kd0IwBOrTgT
# MYkFdtQE1jgbkXYVZjft6ymLuqJrcLFYwD8C2zdNAXJLk1Y+MCtGafgW6f6SkT6B
# FrNaSOqQ9xXiaNStF2FwYdmZ476zcY+eEg2rH1grTwCMewZ9r7m3+H8iat/tR0pt
# 9scYAre1oaL33LB6DGZi3JkssNYyj42sutcNao2hQXRHcsh+vv1dLR+Di2mO6Ji5
# MNfvEgCrWWZjNVSwvhwCXdJPqqpyTbkRf8HJEp0gWvjk6VoF8sWidDw/8oMLj+wW
# qZur7GNe+piJNvly85aFSL9J3SX7RyNeDzX/yK3b4k+g6I/ZziQaNgQtB9gYcm6w
# mj3snCwRbEMEhdhPH0+Chm0Wb97knHJS14Vq9wCe2xh16o3HM5FspboLFkGZMjDV
# tRDPFb7pitwdlA==
# =FMkl
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 08:24:21 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* tag 'pull-riscv-to-apply-20230303' of https://gitlab.com/palmer-dabbelt/qemu: (59 commits)
target/riscv/vector_helper.c: avoid env_archcpu() when reading RISCVCPUConfig
target/riscv/vector_helper.c: create vext_set_tail_elems_1s()
target/riscv/csr.c: avoid env_archcpu() usages when reading RISCVCPUConfig
target/riscv/csr.c: use riscv_cpu_cfg() to avoid env_cpu() pointers
target/riscv/csr.c: simplify mctr()
target/riscv/csr.c: use env_archcpu() in ctr()
target/riscv: Export Svadu property
target/riscv: Add *envcfg.HADE related check in address translation
target/riscv: Add *envcfg.PBMTE related check in address translation
target/riscv: Add csr support for svadu
target/riscv: Fix the relationship of PBMTE/STCE fields between menvcfg and henvcfg
target/riscv: Fix the relationship between menvcfg.PBMTE/STCE and Svpbmt/Sstc extensions
hw/riscv: Move the dtb load bits outside of create_fdt()
hw/riscv: Skip re-generating DT nodes for a given DTB
target/riscv: Add support for Zicond extension
RISC-V: XTheadMemPair: Remove register restrictions for store-pair
target/riscv: Fix checking of whether instruciton at 'pc_next' spans pages
target/riscv: Group all predicate() routines together
target/riscv: Drop priv level check in mseccfg predicate()
target/riscv: Allow debugger to access sstc CSRs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Daniel Henrique Barboza <dbarboza@ventanamicro.com> says:
This is a re-send of patch 1, which is already reviewed, with a
follow-up that uses riscv_cpu_cfg() in the remaining of the file. This
was suggested by Weiwei Li in the "[PATCH 0/4] RISCVCPUConfig related
cleanups" review. Patch 1 makes the work of patch 2 easier since it
eliminated some uses of env_archcpu() we want to avoid.
* b4-shazam-merge:
target/riscv/vector_helper.c: avoid env_archcpu() when reading RISCVCPUConfig
target/riscv/vector_helper.c: create vext_set_tail_elems_1s()
Message-ID: <20230226170514.588071-1-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This file has several uses of env_archcpu() that are used solely to read
cfg->vlen. Use the new riscv_cpu_cfg() inline instead.
Suggested-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Message-ID: <20230226170514.588071-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit 752614cab8 ("target/riscv: rvv: Add tail agnostic for vector
load / store instructions") added code to set the tail elements to 1 in
the end of vext_ldst_stride(), vext_ldst_us(), vext_ldst_index() and
vext_ldff(). Aside from a env->vl versus an evl value being used in the
first loop, the code is being repeated 4 times.
Create a helper to avoid code repetition in all those functions.
Arguments that are used in the callers (nf, esz and max_elems) are
passed as arguments. All other values are being derived inside the
helper.
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230226170514.588071-2-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
