* polarity regs move on LVDS vs analog
* add knowledge or transcoder registers, they
exist seperately on PCH-split
* Native resolutions now work on LVDS under i965
Haiku does not yet support certain features related to POSIX threads.
Constants used to test for the presence of these features should
therefore be left undefined, according to the POSIX spec, but are
currently set to -1. This can cause software built on Haiku to
incorrectly detect the presence of these features.
* unistd.h: Undefine _POSIX_THREAD_ATTR_STACKADDR,
_POSIX_THREAD_PRIORITY_SCHEDULING feature constants.
* conf.cpp: __sysconf: Return -1 for unsupported features.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
* IvyBridge or higher can auto-train.
* Linux doesn't use this feature, however
manual FDI link training is *really*
complex... lets try auto-training first.
* I really hope we can kill head_mode some day
* Break pll code out from mode code
* The LVDS and Digital are smooshed together and
likely need broken apart.
* A dependent job was requeued even if it wasn't part of the queue
before. The code relied on dependent jobs being already enqueued;
but that cannot be guaranteed.
* If a job failed, its dependent jobs are now also set to failed, so
that they won't be requeued at a later point.
* This caused some of the "Launching xxx failed: Operation not allowed"
messages in the boot process. Those actually weren't harmless, and
could mess up the natural job order.
* Sticky events are events that keep their signal raised, ie. even if
a job is initialized afterwards, it will still be triggered.
* Consolidated naming for external events.
* Events are now registered once they are actually being used. This
allows them to allocate the resources they need to do their thing.
* No impact to non-ValleyView chipsets
* Bump some register locations for VLV
* Only have HDMI port to test with on my ValleyView GPU
and our driver seems to be missing all HDMI and
sideband functionality.
* As ValleyView chipsets seem to be UEFI only, we don't
have VESA fallback, so this shouldn't cause regressions.
(unless we get UEFI framebuffer support)
* Move to more standardized functions matching AHCI spec
* Don't perform unnecessary double port resets
* Begin implementing a software reset to try first per spec.
Software reset needs more work, falls through to port reset
for the moment which is stable.
* Don't duplicate ATA defines, use what we already provide.
* Tested working on VirtualBox 1-16 AHCI ports, Intel C200,
and AMD FCH.
* Each io_context now has a "inherit_fds" member that decides whether
or not this context allows to inherit FDs to its children.
* This replaces the former O_CLOEXEC mechanism.
* You can specify which borders will be drawn using the
BControlLook::B_TOP_BORDER, ... constants.
* Adapted Mail to no longer need the SetInsets() hack.
* Moved entirely into MainWindow.
* Moved duplicated code into separate methods.
* Resize the main window on larger screens by default, as we can make
use of the extra space.
* Use BWindow::MoveOnScreen() instead of make_sure_frame_is_on_screen()
as the former has more info. And is even smarter now as it can
optionally resize windows to fit on screen.
* Center window on screen by default (ie. when there are no settings).
This introduces a more sane API (currently private) that allows for
safer and possibly more efficient implementations:
* It uses a struct of named and typed function pointers instead of just
a void pointer array. This adds type safety to the callbacks so the
compiler can figure out if things match up before subtle bugs get
introduced.
* It provides bounds for all strings/buffers passed to the callbacks.
* It uses const references instead of implicitly copying arguments.
* It folds stroke_x/fill_x pairs into draw_x functions with a fill
argument to reduce the amount of functions needed.
* It uses unsigned values where negative values make no sense.
The old API has been implemented on top of the new one using adapter
functions. It makes copies of all data passed to the callbacks which
effectively keeps the picture data from being modified. This matches
with the R5 behaviour.
This also reimplements the buffer parsing to be safe against corrupted
data by validating that the types actually fit in the provided sizes
and buffers (using a templated reader).
Since this class is used from the app_server with user provided data,
making it more safe is important even though it comes with a slight
overhead (replicating R5 behaviour, i.e. crashing the app_server when
corrupted data is fed, doesn't seem very appropriate here).
* Added missing const to some getter methods.
* Date() now tries to parse the date of the mail, and return it as
a time_t; you can still retrieve the actual string via
HeaderField("Date") if you have to.
* Mail now shows the time in the local time zone, and with the
current locale.
* While this breaks binary compatibility with earlier Haiku releases,
use values that are less likely to clash with actual use cases.
* Specifically, using a negative spacing is one way to get rid of the
border of BScrollViews, to put them into a window neatly.
* Also, BControlLook now uses a switch to resolve them.
* This has been necessary due to the undefined call order of
of static objects. Fixes#12315.
* The bug has been caused by the linker which free unused resources,
making the BMediaRoster to run in a zombie state. In this state
anything such as a message could make the looper to crash.
* The class is reintroduced with some differences though, we are
going to protect it from another thread calling Roster() while the
BMediaRoster is quitting and implement BMediaRosterEx::Quit.
* Unregister registrar notifications before we quit our thread. Avoid
to uninitialize anything from QuitRequested as it may cause problems.
The POSIX standard requires us to allow assert.h to be included multiple
times with differnt values of NDEBUG. So we can't have a global header
guard on the files. However, we must also make sure that we don't
declare functions multiple times in that case. Re-introduce an header
guard on the part of the file where we declare functions, only.
Fixes lots of warnings when building Netsurf.
It allows to launch the app, but keep its main thread suspended instead
of automatically resuming it.
Also add appThread argument which allows to retrieve the main thread of
the launched team.
2 concrete classes which are currently implemented:
* BSpinner (works on int32s)
* BDecimalSpinner (works on doubles)
In addition BAbstractSpinner now inherits from BControl instead of
BView/BInvoker. This allowed for code simplification at the cost of needing to
cast for the decimal version because SetValue(int32 value) comes from BControl.
Also, add a spinner_button_style enum with 3 options:
* SPINNER_BUTTON_HORIZONTAL_ARROWS
* SPINNER_BUTTON_VERTICAL_ARROWS
* SPINNER_BUTTON_PLUS_MINUS
which sets the spinner arrows to either use horizontal arrows (left/right)
vertical arrows, (up/down), or +/- symbols (the default).
If the spinner button is using horizontal arrows you can decrement and increment
the spinner value by pushing control+left/right, otherwise you can increment and
decrement by pushing up or down. The reason for needing control is so that you
can move the cursor in the textbox otherwise.
Switch the 3 apps that are currently using BSpinners to use the integer variety
in Deskbar preferences, WebPostive preferences, and Screen preferences.
It provides a way for filesystems to cache a lookup failure and
therefore prevents repeated lookups of missing entries. This is a
common scenario for example in command lookup and compiling, where
each directory in PATH or each include directory is searched for the
given entry.
The individual debug heap implementations are now exposed via a
structure of function pointers and a common frontend dispatches the
malloc and malloc_debug APIs through them.
The MALLOC_DEBUG environment variable can be used to select the guarded
heap by adding 'g', otherwise the debug heap is used as the default.
Consequently the separate libroot_guarded is not needed anymore and has
been removed.
To allow the use of environment variables this early, init_env_post_heap
has been added and the heap dependent atfork() moved there. This allowed
to fold the code of init_heap_post_env into init_heap so the former has
been removed.
* Killing the thread leaks resources, and it will terminate cleanly and
safely when the destructor exits anyway.
* Fixes#12293. Thanks to ttcoder, jackburton and bonefish for investigating!
* Does not fix#12286. Going to bissect now...
* The first problem was the O(n^2) complexity of the algorithm, it's
now linear and try to act in a circular way by dispatching
events and reading the port in a balanced way. This exclude
a certain degree of possible deadlocks.
* Add detection and escape when the system try to kill the
thread. This solve some blocking issues on exit et similia
that i had with libjackcompat.
* The algorithm choose soon which event to focus on.
* Lateness is calculated just before the event is dispatched
as it is the more appropriate place, otherwise we would be
calculating something imprecise/guessed.
* Remove timed_event_queue::queued_time. It's more precise to
just use the RealTime() before to Dispatch the event.
* It should solve the BSoundPlayer lateness problems.
* With those improvements the media_kit is not going to lock
completely under stress conditions, instead it try to work
in a best effort shape.
* There's still room for improvements, for example i'm considering some
strategies in lateness situations such as update scheduling latency,
try to decrease waiting time and detect when we are too early on
the other hand to recover when the load go down.
* Thanks to Julian Harnath for sharing his WIP patch which helped
with some controls such as avoiding negative lateness.
* Comments are welcome!
* B_AUTO_UPDATE_SIZE_LIMITS only really makes sense for resizable
windows, and it only sets the minimum/maximum window size.
* ResizeToPreferred() resizes the window to its preferred size, and
also supports height-for-width layouts.
* Due to the needs to provide a peaceful UX, i moved out the
notifications mechanism from the Media preflet and i have
integrated it with the launch and shutdown functions of MediaDefs.h.
* This implied to introduce a new launch_media_server function
similar to the shutdown_media_server allowing to specify a custom
notification function too.
* Both functions then are reworked to send by default notifications
to the Deskbar, this was needed because in a lot of situations
the mechanism failed without correctly noticing the user.
* The one argument launch_media_server is considered to be deprecated,
the default argument is removed to mantain binary compatibility but
make new apps to automatically use the new one with just the default
arguments. This is needed due to conflicts in overloading.
* Improve notifications by indirectly extending localization
to old BeOS apps.
* This is done by watching to registrar notifications
and providing a minimal service to contact the
media roster in private API. The roster use this
service to automatically reconnect to the media_server.
* Improve consistency by adding a BMediaRosterEx destructor
and using it for the specular functionality of ctor instead
to use the father's class destructor.
* Avoid double initialization of MediaInitializer that
becomes MediaRosterUndertaker.
* Remove superfluos call to BMediaRoster::Quit()
in media_addon_server.
* This closes#12114 again; while not POSIX, it's just a line away.
* Removed exect() from the header -- not sure where this came from.
but I can't find anything about it on the net.
* Consolidated use of asterisk style in exec.cpp.
For defining the text that appears alongside the icon.
This function really has too many parameters; we probably should break
it out into a BAction class...
* This also fixes the shutdown process, as the registrar no longer
kills the app_server.
* Removed SERVER_PORT_NAME definition as it has no use anymore.
* When creating the port of the registrar's authentication manager, we
now set it manually, so that the user/group functions work.
* This allows LaunchDaemon::_StartSession() to set up the user, and
groups as needed.
* Instead, the caller should have done this already. This is really
outside of the scope of the launch_daemon.
* Fixed Login with empty passwords; removed the (unused) test login
feature along the way.
* You can now add arbitrarily named fields to the message as well,
without having them all specified in the template.
* Also added a missing converter method that is called when there
are no values to add, and implemented all methods in the base
class, so that you only have to implement the methods you actually
need.
* BRoster now allows settings a "no-registrar" mode that is currently
only honored in _LaunchApp(), though.
* Job::Launch() is now using this, which also allows launching
applications by signature (ie. if the job name matches the
signature, you can omit the "launch" option).
* You can now put jobs/services into a target.
* Instead of having Login started as part of the normal boot process,
it's now in the "login" target.
* The app_server now launches the login target when a login becomes
available (ie. during startup, but that could be improved later on).
* Instead of launching Tracker/Deskbar directly, we now launch the
Login application.
* This will now start a new session for the selected user (the password
is currently ignored).
* When a user session is started, the launch_daemon forks, and the
child then restarts the LaunchDaemon application in user mode.
* It then registers itself with its parent, in order to resolve user
dependent services.
* Added a user launch file that will cause Tracker, and Deskbar to
start in the new session.
* get_roster_port_name() is no longer needed.
* This also removes the app_server restart code from the debug
server -- this will be done by the launch_daemon in the future.
* Instead of letting the kernel search for the syslog port, the
daemon now registers itself with the kernel (which even solves
a TODO).
* A port is created for the actual log messages from the launch_daemon,
and used on start.
* However, the SyslogTest does not yet work, due to the BMessage <->
KMessage communication problems.
* These methods don't really work yet, as BMessage doesn't support
replying with a KMessage; the request is received, but the reply
never gets to the target.
* Dropped "create_port" -- this is now the default for services.
* Additionally (or alternatively, if you use the "legacy" mode), you can
now create named ports, and specify their capacity.
* Added convenience methods to BLaunchRoster that automatically use the
signature of the current be_app.
* BRoster::Launch() cannot be used (yet), as it pre-registers the
application we're launching, and that won't work for the registrar or
anything else until the registrar is up and running.
* Renamed B_GET_LAUNCH_CONNECTIONS to B_GET_LAUNCH_DATA.
* Add the team ID to the get-launch-data reply.
* Added BLaunchRoster::GetPort() for convenience.
* Removed some superfluous debug output, but temporarily dump all stdio
to /dev/dprintf (ie. the syslog).
* Made job matching case insensitive (as MIME types should be).
* This enables a mechanism to profile almost the complete boot process
(starting with main2()), if SYSTEM_PROFILER is defined to 1.
* You can access the profiling data using "profile -r".
* This will be heavily inspired by Apple's launchd, as well as
systemd -- for now it really doesn't do a whole lot, though.
* What works so far: the configuration files are read, parsed, and
the jobs created.
* The jobs are even initialized, and their message ports created.
* BApplication now retrieves a previously created port from the
launch_daemon for use with BServer.
* Only the registrar actually uses this for now.
BColumnListView:
- Add helper method for getting the visible rect of a given field.
Refactor SuggestTextPosition to use it.
{Tree,Table}:
- Add wrapper to retrieve table cell rect using the aforementioned
BCLV helper.
* Address TODO about setting fSelected when nothing is done.
* Pass a pointer to the tab view to the BTab so that it can call Invalidate().
(Checked against BeOS).
* Call Invalidate() from the BTab after SetView() & SetName().
Fixes#12108 & #12196.
The media_server is now able to remember the timesource associated to
a certain registered_node and always remove it when the owner
application crash, Fixes Ticket #11852
* Drop lib/edit and matching bsd header
* Convert Debugger to libedit build package
* Should solve problems with libedit consumers
not defining _BSD_SOURCE
* Progress on #10267
netresolv (and libbind) won't cache DNS requests, which can result in a
lot of DNS requests being made for the same host. Implement a simple
cache in RAM (local to each application) which will keep the most
recently requested addresses cached. This can speed up loading of an
HTTP page a lot, by saving a DNS request for each resource stored on the
same server as the main page.
libbind development was transferred to the NetBSD project at
http://wiki.netbsd.org/individual-software-releases/netresolv/
There isn't an official release yet, but they provide a set of patches
against the latest libbind release.
* Remove all files we don't use
* Merge the changes to the remaining files
* Add some new files we need
* Move getifaddrs implementation to libnetwork (instead of libbnetapi)
so it can be used by netresolv.
Fixes#8293 : netresolv uses getifaddrs to determine if there is a local
IPv6 address. If there is not, it will not return AAAA records.
* Was leaking fQueuedJobs on destruction.
* fHaveRunnableJobSem implementation was not completed; it was never
released.
* Added Pop() variant that is a bit more flexible, and allows for a
timeout as well as waiting even when the queue is empty, and can
return a status code.
* Fixes sharing semantics, so non-shared semaphores in non-shared
memory do not become shared after a fork.
* Adds two new system calls: _user_mutex_sem_acquire/release(),
which reuse the user_mutex address-hashed wait mechanism.
* Named semaphores continue to use traditional sem_id semaphores.
* Put it in the BSupportKit namespace, following the style introduced
with the package kit for now.
* The BSupportKit::BJob class no longer knows about the package kit's
Context class. However, the BPackageKit::BJob class does.
* Due to the namespace juggling, a lot of files had to be touched.
* The JobQueue class remains private.
* Due to the way Haiku is built on itself, you cannot build this change
under Haiku with an older release.
* When you receive a message from a KMessage, and reply to it,
it will automatically reply as KMessage, too.
* This allows to communicate with BLoopers from within the kernel
or libroot.so.
"Renaming" means the icu namespace is suffixed with the version number,
atm icu_55. Using "renaming" allows to use two different versions of ICU,
thus easing upgrades. For instance haikuwebkit uses a current version of ICU,
while the system uses a newer one after an upgrade.
* Replace all uses of the icu namespace in our public headers, with a macro
defaulting to icu. As the namespace is only used for private fields pointers,
there should be no impact.
* Locale kit *.cpp have to import the macro from <unicode/uversion.h> *before*
including any locale headers. Ditto for a Time preferences cpp file. This way,
the correct current icu namespace is referenced.
* Fixes bug #12057.
Those return uintNN_t types instead of our own types,
but uint32 for example is long while uint32_t isn't,
giving some trouble with the PRI* macros for example on PPC.
It seems like glibc also has paths.h and m4 fails to bootstrap
without _PATH_BSHELL.
This file really needs some cleanup btw, since most is actually
irrelevant or incorrect for Haiku.
The AddOnManager was in the global namespace, clashing with application
classes with the same name.
The input_server has an AddOnManager of its own. When the
shortcut_catcher filter was loaded by said AddOnManager, it in turn
loaded libgame.so, which in turn loaded libmedia.so, where an
AddOnManager was created for the global AddOnManager instance in
libmedia.so. Unfortunately the wrong AddOnManager, the one from the
input_server, was created. This lead to two AddOnManagers being active
in the input_server which very well could be responsible for #11049
and #11280.
This was a regression since the move of the AddOnManager from the
media_server to libmedia.so in hrev47086. This also fits with the two
tickets.
I actually noticed the problem when debugging the shutdown process of
the input_server, where the destruction of the wrong AddOnManager
caused a deadlock with itself.
* Do not define the symbols by default, as they are not in the default
libraries.
* Adjust jamfiles of all code using BSD extensions to define
_BSD_SOURCE.
* This makes Haiku slightly more compliant to standard C/POSIX.
It works analoguous to BView::RemoveSelf(), i.e. it removes itself from
the parent (layout in this case) and returns whether or not it had and
was successfully removed from said parent.
The BNetworkRoute class manages a route_entry and the sockaddr's
associated with it. It replaces the direct use of route_entry in the
BNetworkInterface API.
Using route_entry is fragile and inconvenient as it only holds pointers
to the sockaddr's. When getting a list of routes from the kernel, each
route_entry is set up so that its pointers point into the single flat
buffer that is passed around. Creating a copy of the route_entry and
then deleting the flat buffer makes the pointers in the copy stale.
Returning these route entries therefore always lead to a use-after-free
when they were eventually used.
BNetworkRoute also takes over the code and functionallity of getting
routes from RouteSupport. The corresponding method in BNetworkRoster is
replaced by a static method in BNetworkRoute.
Also distinguish between the default route and gateway of an interface.
GetDefaultRoute() now gets the default BNetworkRoute for the interface
while GetDefaultGateway() gets the associated gateway address within
that default route. Adjust network preferences panel to this change.
Note that we currently only seem to have per interface default routes
and not an actual global default route. This was already the case before
these changes and I did not further investigate what this means.
It can be used to get a stack trace of the current thread. Note that
this works by walking frame pointers and will not produce anything
useful if an application is compiled with the frame pointers omitted.
The stack base and end addresses have to be provided as arguments and
are used to check that the frame pointers fall within that range. These
values are thread specific and can be retrieved with get_thread_info().
No other sanity checks (like checking for loops in the linked list) are
done.
This is a simplified rewrite of the stack trace code from the kernel
debugger.
As this code is common to x86 and x86_64 but is not generic across
architectures I introduced x86_common as a directory to put such
sources.
Extend the get_nearest_symbol_at_address() private runtime_loader
export to include imageName and exactMatch arguments.
The imageName holds the SONAME of the image, if available, so cannot
neccessarily be extracted from the image path.
Whether or not there was an exact match, i.e. the symbol with its size
contains the address, is now returned in exactMatch.
When enabled (using heap_debug_dump_allocations_on_exit(true) or
MALLOC_DEBUG=e) this causes a dump of all remaining allocations when
libroot_debug is unloaded. It uses terminate_after to be called as
late as possible.
When combined with alloc stack traces this makes for a nice if a bit
crude leak checker. Note that a lot of allocations usually remain
even at that stage due to statically, lazyly and globally allocated
stuff from the various system libraries where it isn't necessarily
worth the overhead to free them when the program terminates anyway.
When configured to do so (using heap_debug_set_stack_trace_depth(depth)
or MALLOC_DEBUG=s<depth>) the guarded heap now captures stack traces on
alloc and free.
A crash due to hitting a guard page or an already freed page now dumps
these stack traces. In the case of use-after-free one can therefore see
both where the allocation was done and where it was freed.
Note that there is a hardcoded maximum stack trace depth of 50 and that
the alloc stack trace takes away space from the free stack trace which
uses up the rest of that maximum.
The get_stack_trace syscall generates a stack trace using the kernel
debugging facilities and copies the resulting return address array to
the preallocated buffer from userland. It is only possible to get a
stack trace of the current thread.
The lookup_symbol syscall can be used to look up the symbol and image
name corresponding to an address. It can be used to resolve symbols
from a stack trace generated by the get_stack_trace syscall. Only
symbols of the current team can be looked up. Note that this uses
the symbol lookup of the kernel debugger which does not support lookup
of all symbols (static functions are missing for example).
This is meant to be used in situations where more elaborate stack trace
generation, like done in the userland debugging helpers, is not possible
due to constraints.
* Add a BRow default constructor that use font size to compute height.
* Min height size for Title and Row are decoupled.
* The font ratio for Title and Row are decoupled.
* For small font use min height (set to usual 16.0).
* Better baseline formula.
* Fixes#11944.
This allows for something similar as was implemented in 217f090 but
makes it optional and configurable.
The MALLOC_DEBUG environment variable now can take "a<size>" to set
the default alignment to the specified size. Note that not all
alignments may be supported depending on the heap implementation.
* So that you know how much already was, and still has to be downloaded.
* Automatic whitespace cleanup.
* The link in FetchFileJob.h did not fetch the correct header under
Haiku anymore (since the addition of the private headers to the
image).
* drop my fdt tests
* we have to call fdt parsing code *after* cpu_init (why?)
* pass fdt pointer to all FDT support calls to avoid confusion
once we get into the kernel land
* look for PL011 compatible uart and use it
* Add some saftey checks to serial putc code to avoid null*
* fdt_node_check_compatible returns 0 on success not 1
* fdt_get_device_reg needs to add the SOC base to the result
* fdt_get_device_reg might need to add the second range cell
instead of reg?
* And call it from the DNS client -- this is the only add-on that does
not trigger a configuration or settings update, so we have to notify
the changes manually.
* Get{Interface|Network|Service}() methods are now const.
* Added variants of Interface(), and Service() that are const.
* Added new BNetworkServiceSettings::IsRunning() convenience method that
reflects the status quo rather than the settings.
* Added BNetworkInterfaceListItem that can be used by interface protocol
add-ons to represent their functionality in the list view.
* It will automatically update itself on changes, and will show the
specified label, and address, if any, as well as indicate whether or
not the family has been disabled (which doesn't work perfectly yet,
as IFF_AUTO_CONFIGURED is on the interface level).
* Therefore, the interface list item will no longer show the address,
but the type of the device instead.
* Introduced the BNetworkConfigurationListener interface that is used
to broadcast network updates to.
* You can now optionally specify a converter that does the actual
message to settings conversion, and vice versa.
* This allows for more sophisticated and custom conversions.
* Network now monitors all network, and network settings changes, and
will notify all add-ons about those changes.
* Removed the global apply button. Instead, the static IP configuration
now got that button. All other changes will be instant.
* Added (still incomplete) helper classes for the settings messages.
* The net_server now uses these classes for its interfaces, and services.
* Renamed service_address to service_connection, as that better matches
what it is used for.
* As experimental API class BNetworkSettings.
* Added add/remove methods for interfaces, and services, too.
* Moved the conversion of the wireless networks into the settings class,
too, so that it only gives out converted ones (but accepts both
variants).
* The interfaces logic is within the main application, so is the
new interface view.
* Disabling/renegotiating does not work yet.
* Reveals a bug in some interface code; when you click on an ethernet
device first, there is no place for the wireless menu. When you then
press on a wireless device, it crashes in BMenuField code.
In the other direction, there is then an empty space.
* Fixed list item width reporting.
* Added an extra looperName argument to the private BApplication
constructor that BServer is using.
* This is now used to fix the ugliness that gave the registrar
a different looper name, and even saves a string comparison.
