Added a TODO note about using menu labels in tests while they could someday be translated.
Replaced some hardcoded strings with the proper defines.
Made the add-on also apply partial emails, I suppose it's the intent.
Works for me.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42972 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fix bug where we were using an r600 bios pull method
on r700 cards. this should help prevent shadow rom fallback.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42933 a95241bf-73f2-0310-859d-f6bbb57e9c96
There were a large number if incorrect, duplicated, misplaced
registers that were leading to bugs in the code. This is my first
shot at cleaning them up. Luckly as we are using AtomBIOS the number
of registers we need to know about is shrinking.
* remove registers left over from register banging days
* r770 is less then r710, r720 in the drm sources. Fix in code.
* enable newer radeons for testing
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42930 a95241bf-73f2-0310-859d-f6bbb57e9c96
behaviour... but while things are incomplete
it may be better to try and push on.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42929 a95241bf-73f2-0310-859d-f6bbb57e9c96
* don't resize the frame buffer after mapping it.. doesn't make sense
* add memory controller code and program the memory controller for r600
* remove unneeded frame_buffer_int
* don't malloc mc_info, waste of time
* fix scaler setting
* vramStart in mc should be 0... get vertical colored lines however when this
this is set properly (everything in mc_info is the MC view of FB BAR)
When vramStart is the FB physical address... i get proper video on some cards
... thoughts?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42924 a95241bf-73f2-0310-859d-f6bbb57e9c96
* set blanking color to full red for debugging
to know when blanking is enabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42920 a95241bf-73f2-0310-859d-f6bbb57e9c96
I will take some rest as obviously I should not allwed to commit anything rigth now.
Sorry guys.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42908 a95241bf-73f2-0310-859d-f6bbb57e9c96
allows for more flexible searching
* check out shadow VGA bios as very last resort
may cause issues but not a bad last resort
compared to an app_server crash
* better tracing
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42906 a95241bf-73f2-0310-859d-f6bbb57e9c96
BUSBDevice::GetDescriptor() to retrieve whatever descriptor, including a
complete configuration descriptor.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42905 a95241bf-73f2-0310-859d-f6bbb57e9c96
* we can now utilize these chipset
flags throughout the driver to better id
cards and features
* remove leftover BIOS size define from intel skel
* no *real* functional change
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42904 a95241bf-73f2-0310-859d-f6bbb57e9c96
* look at PCI bar 0 (Frame buffer base) for AtomBIOS
* potential solution to #8040 ?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42903 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add potential support for IGP chipsets
* igp code is *untested* and should work *in theory*
* potentially resolves#8040 / #8046 ?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42901 a95241bf-73f2-0310-859d-f6bbb57e9c96
Display Port stuff. We need special DIG encoder
storage unless I can find a way to mash it into
the same box as the other encoders.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42897 a95241bf-73f2-0310-859d-f6bbb57e9c96
* adjust pll post divider calculation
* fix digital encoder setup action
* don't run memreq on DCE < 3, should solve
some AtomBIOS failure loops
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42892 a95241bf-73f2-0310-859d-f6bbb57e9c96
* will fix other var names to match style guidelines
shortly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42891 a95241bf-73f2-0310-859d-f6bbb57e9c96
* disable Evergreen+ cards for now as they are tested
non-functional.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42888 a95241bf-73f2-0310-859d-f6bbb57e9c96
* correct a few wrong DCE versions
using xorg documentation
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42887 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add notes that AtomBIOS goes all the way back to X700 (r4xx)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42884 a95241bf-73f2-0310-859d-f6bbb57e9c96
Deallocate resources correcly in error case. Support for level and edge
interrupts.
Removed volatile keyword where it's not needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42882 a95241bf-73f2-0310-859d-f6bbb57e9c96
with the interrupts disabled (was causing KDL under qemu).
Add a define to switch the HPET timers to 32 or 64 bit (32 bit now by default)
Reordered some things
Add some debug output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42881 a95241bf-73f2-0310-859d-f6bbb57e9c96
* correct? color mode setting bug
* fix var naming to match style guidelines
* add a few missing register defines
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42879 a95241bf-73f2-0310-859d-f6bbb57e9c96
* sort files in Jamfile
* add TV and compontent video support in encoder code
* fix missing var in display detection code
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42878 a95241bf-73f2-0310-859d-f6bbb57e9c96
* radeon HD mode setting on analog monitors is now working!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42877 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fix a order of operations bug
* fix a few long lines
* pll computation should now be correct
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42876 a95241bf-73f2-0310-859d-f6bbb57e9c96
* don't set referenceDivider as minimum unless directed to by
AtomBIOS
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42873 a95241bf-73f2-0310-859d-f6bbb57e9c96
(they are actually reversed), so introduce a find_reg() inline function to map
such regs individually instead. Should fix interrupt storms on SandyBridge.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42870 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also add the definitions and some specifics for IronLake (ILK), but keep the
IDs disabled as at least the one version I can test with doesn't work yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42869 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Make the pointer style consistent accross all components, which should make it
easier when working all over the place.
* 80 char limits.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42863 a95241bf-73f2-0310-859d-f6bbb57e9c96
Not completely tested : my device has no control lines wired. RX/TX seems to
work fine, at least.
Inspiration from the Linux driver since there isn't any documentation avilable:
http://lxr.free-electrons.com/source/drivers/usb/serial/cp210x.c
The switch/case for VID/PID identification is getting quite long. Isn't there a
better way to do it ?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42860 a95241bf-73f2-0310-859d-f6bbb57e9c96
register blocks and we encode their block into the register definition. On
register access these blocks are then translated into the final address.
* Set up the register blocks for (G)MCH and PCH variants.
* Remove most SandyBridge code that was actually PCH specific and is now taken
care of automatically.
* This will temporarily break SandyBridge support again until the right
transcoders are actually programmed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42857 a95241bf-73f2-0310-859d-f6bbb57e9c96
* rename *_* pll vars to match style guidelines
* refactor PLL calculation to be easier to read with
more central 10kHz unit conversions
* limited mode switching has been seen working including
a perfect 1280x1024@75
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42855 a95241bf-73f2-0310-859d-f6bbb57e9c96
AtomBIOS wants number of 10Khz Units
* better debugging after modeset on current
CRTC status
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42853 a95241bf-73f2-0310-859d-f6bbb57e9c96
we get valid EDID data for two physical connectors (one analog, one digital)
Check for load on the analog or assume digital and keep rolling as normal
* style fix, rename bios_*_scratch to biosScratch*
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42847 a95241bf-73f2-0310-859d-f6bbb57e9c96
values, as those might be slightly off (when coming from the GTF for example)
and cause needless display scaling.
* Tiny cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42844 a95241bf-73f2-0310-859d-f6bbb57e9c96
request sense. Otherwise we can easily run into an infinite recursion. Should
fix#8022.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42840 a95241bf-73f2-0310-859d-f6bbb57e9c96
(the one in my new ThinkPad X1). The PLL is still off a bit so it has a few
blurry stripes, but EDID and mode setting basically works.
* Starting with IronLake the north/south bridge or (G)MCH/ICH setup was moved
into a platform control hub (PCH) which means that many registers previously
located in the GMCH are now in the PCH and have a new address.
* I'm committing this mostly because this way the additions are more easy to
follow. It is a bit messy and I'll clean it up more and possibly make it a
bit more generic. Also most of these changes actually apply to IronLake and up
and aren't SandyBridge specific, so a few of those additions will still get a
broader scope and new chips will be added.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42839 a95241bf-73f2-0310-859d-f6bbb57e9c96
Seems to work correctly on real hardware, not on qemu where it
can only use the irq 2, and this causes wreakage (could be a programming error).
Changed from the kernel code:
- Adapted to use as a driver
- Configure for level interrupts instead of edge, which seems not to work correctly
- Add traceing dprintfs
- Various other changes
Does not use yet the new interrupt api introduced by Michael Lotz.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42837 a95241bf-73f2-0310-859d-f6bbb57e9c96
move quite a bit of code away from var_var format
* #if 0 some not-yet-ready r500 code
* no real functional change
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42835 a95241bf-73f2-0310-859d-f6bbb57e9c96
ensure bitwise ands are compared to 0 or non 0 as per Axel
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42830 a95241bf-73f2-0310-859d-f6bbb57e9c96
we will need to query the card dpms state
for each monitor at a later date
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42829 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add update of crtc encoder scratch registers
* rename id for more descriptive crtc_id
* encoder dpms, BL on/off on lcd
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42828 a95241bf-73f2-0310-859d-f6bbb57e9c96
to be available for using during build. It was requested by Frederik Modeen.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42822 a95241bf-73f2-0310-859d-f6bbb57e9c96
it in case it was set "on".
* Tracing added for the case of ignoring interrupt with not active OBF status bit.
Fixes#7973#6313
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42820 a95241bf-73f2-0310-859d-f6bbb57e9c96
* set encoder flags the same as connector flags
* add curly comments to make troubleshooting clearer
* program encoder dpms scratch registers
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42818 a95241bf-73f2-0310-859d-f6bbb57e9c96
* don't init asic unless needed
* do dpms by hand on mode set
* detect tv and skip during detection for now
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42817 a95241bf-73f2-0310-859d-f6bbb57e9c96
* make encoder setup functions return status_t
* really need a struct to hold encoder info
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42814 a95241bf-73f2-0310-859d-f6bbb57e9c96
I try to keep UBSConfiguration binary compatibility, but proofreading is welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42812 a95241bf-73f2-0310-859d-f6bbb57e9c96
* flip encoders on during modeset.
* crt0 status keeps getting higher and higher which is a good sign.
the more bits that are set, the closer to a successful lock.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42802 a95241bf-73f2-0310-859d-f6bbb57e9c96
* reorganize mode set code to match layout of linux DRM driver
* add initial DPMS code
* add lots of TODOs
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42801 a95241bf-73f2-0310-859d-f6bbb57e9c96
