Generic UVC USB Webcam.
* Added my own Logitech HD Pro C910, which publish a compound device class, not an UVC class.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42693 a95241bf-73f2-0310-859d-f6bbb57e9c96
* need to break out connector and encoder addition into seperate functions as
the linux kernel did... that function is getting pretty large and deep.
* my card seems to map everything as TV DAC or TMDS... weird.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42684 a95241bf-73f2-0310-859d-f6bbb57e9c96
uint8 vs a void pointer.
* guys at AMD confirmed that the method looking directly at the object table
should be the only method used on modern cards (r600 or later)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42683 a95241bf-73f2-0310-859d-f6bbb57e9c96
it incorporate now "em" and "lem" freebsd drivers.
Note: if_igb is not used - too much "undeclared"
stuff required from the compatibility layer. :-(
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42680 a95241bf-73f2-0310-859d-f6bbb57e9c96
* introduces fNextStartingFrame to keep track of the next frame to use on next submit.
* set the IOC bit for the last ITD
* computes multiply field of the ITD based on the packed size (1, 2 or 3).
* use locking around linking of ITD
* free descriptors on errors
* on finishing, whenever a non success status is found, set actual length to zero
* on finishing, when copying data to the Transfer object, copy starting on packet boundaries (skipping unused bytes).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42679 a95241bf-73f2-0310-859d-f6bbb57e9c96
(.c to keep compatibility with older C accelerants)
* use functions for decoding video_electronics
* thanks for the guidance Axel!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42668 a95241bf-73f2-0310-859d-f6bbb57e9c96
NULL-terminated list of driver_t* entries instead of single entry.
That allows to combine multiple FreeBSD drivers into single Haiku
driver add-ons;
* Support for DEC 21140 (Tulip) chipsets (provided by the 'de' driver)
incorporated into dec21xxx driver. That brings network connectivity to
Haiku systems running in MS Virtual PC VMs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42658 a95241bf-73f2-0310-859d-f6bbb57e9c96
* malloc storage for mc state info
* redo pll range struct
* change to ATOM_ENCODER_MODE for connector info
* redo pll calculations to match AtomBIOS requirements
* some structure changes
* no longer init already posted AtomBIOS as it
causes an infinite loop of AtomBIOS calls
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42644 a95241bf-73f2-0310-859d-f6bbb57e9c96
See http://www.acpica.org/download/changes.txt done after 2010-10-13 for info on ACPI changes.
* Adapted the embedded controller to match current FreeBSD one.
There will probably be some issues with these changes initially.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42637 a95241bf-73f2-0310-859d-f6bbb57e9c96
* backport fixes to ATOM_IIO_MOVE_ register offsets
* small bit of style correction
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42624 a95241bf-73f2-0310-859d-f6bbb57e9c96
* when TRACE_ATOM is enabled in bios.c, we dump
each accelerant instance of the AtomBIOS rom
to disk in /boot/common/cache/tmp/ (next to usb
hid descriptors in the same file name format)
* these images can be parsed with the AtomDis application
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42622 a95241bf-73f2-0310-859d-f6bbb57e9c96
include all supported video modes. Fixes#4166.
Note that this change will probably show several weird resolution is some
configurations. They are all valid resolutions but are not commom so we need
a way to filter those out.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42600 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add igp property to pciid map
* add disabled bios pull for r700 and ni cards
* refactor model numbering as >R700 AMD switched
to named card families
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42596 a95241bf-73f2-0310-859d-f6bbb57e9c96
semaphore is created :)
* delete semaphore on AtomBIOS destroy
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42590 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add atom_parse_cmd|table_header functions to evaluate
data structure versions
* convert asic function to status_t and reflect
execute_table result
* cleanup logic in destroy atombios parser function
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42589 a95241bf-73f2-0310-859d-f6bbb57e9c96
* backport additional bugfixes from drm version
* add logic to detect infinite execution loops
* add a semephore to prevent multiple executions on
non-thread safe code ( this needs testing )
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42585 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add missing header for some radeon registers
* begin removing now un-needed direct register calls
* move and refactor crtc functions
* fix function naming to be clearer
* create more AtomBIOS style calls
* this will eat your cat at the moment, don't bother testing
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42582 a95241bf-73f2-0310-859d-f6bbb57e9c96
(we aren't taking ownership of this one.. yikes)
* add first AtomBIOS call to test the waters
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42578 a95241bf-73f2-0310-859d-f6bbb57e9c96
* only create_area if we found a valid AtomBIOS
* lock down write access to kernel AtomBIOS area after populating
* remove locking on kernel AtomBIOS area as it's not needed
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42573 a95241bf-73f2-0310-859d-f6bbb57e9c96
* remove some un-needed log messages
* memset area from create_area just incase
* add enabled bios read in addition to disabled one
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42566 a95241bf-73f2-0310-859d-f6bbb57e9c96
* AtomBIOS is now loaded and passed into the radeon_hd accelerant
* correct pointer passing in bios_init
* AtomBIOS is now read and initialized by AtomBIOS parser
* feel free to start testing the driver again :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42564 a95241bf-73f2-0310-859d-f6bbb57e9c96
* better error checking
* the driver can now locate the AtomBIOS on real hw!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42558 a95241bf-73f2-0310-859d-f6bbb57e9c96
* implement various methods to pull AtomBIOS from card
* add some missing registers to headers from linux drm driver
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42553 a95241bf-73f2-0310-859d-f6bbb57e9c96
* clone VGA rom shared area in accelerant
* enable access, and make a copy of the VGA bios
* give malloc'ed VGA bios pointer to AtomBIOS parser
* Still invalid BIOS magic
* TODO : Move atomBIOS pointer and reorganize some stuff
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42550 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Point AtomBIOS to PCI rom mapped in memory
* Things no longer crash, but we get an Invalid BIOS Magic error
in the logs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42543 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Pull pci_rom base address from pci subsystem
* Point AtomBIOS parser to pci rom address
to set up and malloc atom_context
* This is untested! Don't run on an
expensive card until I test it on a cheaper
one!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42541 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Refactor AtomBIOS parser to use non-linux-kernel calls
(normally I would keep it as-is and do wrappers, but the
AtomBIOS parser has been rewritten from scratch twice
by its creator in the last 5 years.. so eh.
* Refactor AtomBIOS parser to be more haiku-like stylewise
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42538 a95241bf-73f2-0310-859d-f6bbb57e9c96
effect), and since the test was a bit too constraining (I have an LVDS panel on head A), it would prevent setting colors for the CMAP modes.
This finally gets the \n demo working from the original binary from BeOS, without any change.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42523 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Refactor MCFBsetup to be a little simpler for now
* Implement radeon accelerant_device_info for screen preflet
* Re-add CRT Power calls to display code.
* Disable blanking setting for now... just can't figure out
what AMD wants for this.
* Remove some un-needed locking in the scaling code
* Be sure to disable VGA when set_display_mode is called
* Refactor mode setting code to loop over all possible displays
and set the provided mode on the attached ones.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42515 a95241bf-73f2-0310-859d-f6bbb57e9c96
* xhci controller start operation
* command ring and event ring initialization
* No-Op Command test and real xhci irq handle
* xhci root hub support
* add Super Speed enumeration and xhci_rh.cpp into jamfile
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42511 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add missing Idle call for connectors
* Reformulate blanking.. this should match what the
register is after the GTF vesa call
* Set FrameBuffer to card internal address
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42509 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fix crash situation if no monitors detected
* Assume TMDSB if no monitors sensed (temporary)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42508 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fix a few spots where we *should* of been checking for NULL
to prevent referencing a null pointer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42505 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Create new display.c/h for display management
* Rename global gCRT to gDisplay
* Add CRT connection type into gDisplay
* Add CRT connection index into gDisplay
* Refactor registers for each display into gDisplay via regs
* We now shouldn't freak out too badly on multi-monitors
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42462 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed excessive debug output, and values that aren't needed for the timing
computation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42450 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Keep track of the correct number of initial modes available.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42438 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Since it now doesn't crash anymore; set it as default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42436 a95241bf-73f2-0310-859d-f6bbb57e9c96
* I got the downsampling version completely wrong. It should now be much better.
* A small bug in the delta calculation sometimes caused an off-by-one read to the source and a crash of the media add-on server
Effect of this resampler can be heard very clearly using the following setup in Cortex :
* Demo Audio producer producing a sinewave at any frequency (sampling rate is hardcoded at 44100Hz)
* Audio output set to 48000 Hz
* system mixer in between
select either resampler in the mixer and you'll hear the difference immediately.
Should finally fix#1351.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42435 a95241bf-73f2-0310-859d-f6bbb57e9c96
added to the mode list (in 60 Hz, but that doesn't really matter).
* It does this by iterating over the modes found, and computes the
display_timings from them using the GTF code.
* This should help with one of the problems of ticket #7751.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42421 a95241bf-73f2-0310-859d-f6bbb57e9c96
into a usable function - this has some coding style issues I did not care to
fix.
* _AddBaseMode() now computes the mode in case it is not present in the list
yet.
* This should help with bug #7787.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42420 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove read32MC as it doesn't apply to radeon cards >= r600
* Add tmds.cpp for tmds connected monitor management (current radeons
only have TMDSA for the moment) still needs TDMSPower, etc.
* Add some MC calls to mode.cpp, causes KDL so commented out atm.
* Add command to idle all DACs (although POWER_RESET doesn't do
anything on DACs, we should be consistent)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42416 a95241bf-73f2-0310-859d-f6bbb57e9c96
just applied r38391 to the IPv6 code (no time to resolve the TODO, and put
that into a shared class).
* Fixed failure on init handling.
* Not tested, but should work at least better than before, as the hashtable has
never been initialized before...
* This closes bug #7795.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42399 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Lets actually call PLLPower after PLLSet
* Improve screen blanking function
* Detect DAC/PLL to use separately from CRT id
* Add DACSense that senses displays on DACA/DACB
* Grab CRT in PLL code via gRegister crtid
* Set overscan to 0 for now
* Setting extended video modes now kinda works sometimes :-/
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42397 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Network drivers for 3com, ipro100, rtl8139 are updated from FreeBSD 8.2 Release branch;
* Some functions, defines and typedef required by updated and fresh ported FreeBSD
drivers were added into freebsd_compat layer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42393 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove some un-needed test stuff
* Perform a little re-ordering
* Make scale corrections
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42390 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rename PLL register vars to more closely match AMD defines
* Small logic fixes
* Fix pretty large PLLControlTable bug in legacy set.
Wasn't using output of PLLControlTable.
* Fix *REALLY* big bug in CRTCGrab.
Using PLL2 value instead of PLL1 due to incorrect
index offset of pllIndex.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42389 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add crtControl global register
* Add grphUpdate storage
* Do some logical reordering of register writes
* Correct crt final power-on checks
* Enhance tracing
* Disable PLL, it is needed but seems to completely break
the modesetting resulting in black-screen-of-doom.
(fixing PLL set/calibration is now priority one)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42380 a95241bf-73f2-0310-859d-f6bbb57e9c96
sdl_e_type in network byte order, causing such a socket not to receive
anything.
When working around that by not using htons() on bind, sending would then fail
on such a socket because the byte order is actually required to be swapped
there.
* Extend the comment for the B_NET_FRAME_TYPE macro to document that the input
types are supposed to be in host byte order to avoid future confusion.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42357 a95241bf-73f2-0310-859d-f6bbb57e9c96
rules. Otherwise the IMAP add-on is always built without SSL support.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42326 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Workaround for touchpad reset timeouts on some HP/Compaq KBCs. Looks like such
KBC marks the mouse reset request (xFF) as correctly sent (by xFA answer) but
does not wait enough time for the answer from touchpad. So complete answer
finally contains xFE xAA x00 bytes. The workaround detects this xFE xAA answer
and issues the RESEND (xFE) request to touchpad. This forces touchpad to resend
the last packet of data (xAA x00) that can be processed normally by the host;
* Fix for handling passthrough_command() call. The parent device was disabled at
start of processing command and was not re-enabled back in case any error return.
This fixes the touchpad "pass-through" feature handling on the same HP/Compaq HW.
This KBC has the "pass-through" capability marked ON but cannot handle it as
currently implemented - there is no answer from corresponding port. The parent
device stay in disabled state after this;
* Fix ps2_dev_publish() for handling passthrough devices (parent_dev != NULL)
This workaround postpone the publishing such device until the parent device
finishes it's opening and set the PS2_ENABLED_FALG. It prevent from mixing
the Synaptics multi-command sequences from synaptics_open() and ps2_dev_publish()
routines and failing both initializations;
Fixes#2867#3594#4315
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42325 a95241bf-73f2-0310-859d-f6bbb57e9c96
PS/2 active multiplexing activation sequence. This prevent from
IRQ storm on some controllers. Fixes#7635.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42323 a95241bf-73f2-0310-859d-f6bbb57e9c96
- When resizing a window the window size constraint stays soft when solving the layout. This makes sure that the layout constraints can be fulfilled. Fixes r41759.
- Some other refactoring.
S&T should work much better now. Sorry that I wasn't able to finish it before a3.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42280 a95241bf-73f2-0310-859d-f6bbb57e9c96
Localize the mail add-ons.
The Japanese translation is attached to #7689. Please give a notice when it is in the translation system and the ticket can be closed.
Does the B_UTF8_ELLIPSIS comes into the B_TRANSLATE macro?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42265 a95241bf-73f2-0310-859d-f6bbb57e9c96
default_mail{_in|_out}_directory() methods in the BPrivate namespace.
* Used these methods in the inbound/outbound protocols.
* Moved WriteMessageFile() into the BPrivate namespace as well, and put its
prototype into a new header MailPrivate.h along with the new directory
getters.
* Removed the automatic copy to the sent directory again, and only have one
directory for incoming mail. Incidentally, this fixed#7509, although the
underlying filter restriction remains.
* Automatic whitespace cleanups, some style cleanups. Sorry for the mess.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42260 a95241bf-73f2-0310-859d-f6bbb57e9c96
* GCC 4.5 complains about switchs with cases not part of the window_look enum (see WindowPrivate.h).
* To keep them private, cast the enum to int before use in switchs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42250 a95241bf-73f2-0310-859d-f6bbb57e9c96
Would explain why hat shown by StickIt was always static neutral...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42208 a95241bf-73f2-0310-859d-f6bbb57e9c96
directly reduces the time the mouse cursor is visible but cannot be moved
yet. Based on a patch by Adek336 as part of ticket #917.
* Decreased the republishing snooze about a second, too.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42198 a95241bf-73f2-0310-859d-f6bbb57e9c96
Plan to move gRegister into the crt struct at some point.
* Few style fixes
* Added function to probe edid of attached monitors and populate CRT info
* Disable VGA control modifications temporarly while I hammer out some issues.
* Fix radeon card model checks (bitwise & is not |)
* Finally fix? blanking start / end calculations using porch
* Use mask for setting sync polarity
* Add overscan (8 pixels is default?)
* Disable PLLSet/Power for the moment as it seems to muck things up.
* is_mode_supported now validates if a mode line is with the monitors
h/v sync frequencies (how does is_mode_supported know what crt the os wants?)
* PLL Write/Read don't actually use the PLL Write/Read functions (thanks AMD!)
* Added better PLL legacy (r600-r610) support
* Consistantly give no DCCG on legacy cards.
* Tracing!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42191 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Only try to cancel the a transfer, if sUseUSBKeyboard is set.
* Set the "_usbPipe" parameter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42181 a95241bf-73f2-0310-859d-f6bbb57e9c96
allows the use of stty to configure the serial device and later using other
commands with these settings still in place.
* Store incoming termios settings when they are set, restore the previous
settings on open and apply the control modes to the device side as well.
* Only send the control to the system side tty cookie again. Doing it for both
cookies was only done to configure the termios, which isn't necessary anymore.
* Remove fallbacks to c_{i|o}speed fields and always use c_cflag & CBAUD for the
single speed setting we have.
* Remove some leftover control line state logic that doesn't apply anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42161 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Make index numbering consistant (0-n vs 1-n)
* Add a little more tracing to PLLCalibrate because
we were missing a failure situation
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42158 a95241bf-73f2-0310-859d-f6bbb57e9c96
ensure that we don't block on the tty buffer, we chop up the data into blocks
that are written into the tty and then the buffer is flushed to the device
each time. This resolves the issue that a quick open/write/close would not
actually send the data to the device as it would cancel the transfer before
the output thread had a chance to run.
* Use the tty_close_cookie() call. Doing the close before waiting for the input
thread ensures that it is woken up if it blocked on writing into the tty.
* Correct the type of the USB callback status and only try to clear a halt if
the device was actually stalled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42156 a95241bf-73f2-0310-859d-f6bbb57e9c96
available as a module function as well.
* Remove some unneeded resetting from tty_destroy_cookie.
* Move the public module functions to the public API section of the file and
order them by their declaration order in the module info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42154 a95241bf-73f2-0310-859d-f6bbb57e9c96
to op which would've caused a wrong line state to be set.
* Add some more allocation checks.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42151 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add crtid to register struct
* Disable VGA mode on FrameBuffer set (enables extended mode setting)
* Disable blanking calculations and setting more gracefully via if 0
* Add a *large* amount of code to Set/Calculate/Calibrate PLL
* Disable PLL on removal of accel.
* Remove junk comments on overscan
* Enable pixel clock limit pulling
* write32AtMask style cleanup
* Rename ReadMC to be more consistant
(I need to adjust naming for these MMIO calls)
* Implement read/write MC. (so many hardcoded oneoffs AMD)
* Implement write32PLLAtMask MMIO call
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42146 a95241bf-73f2-0310-859d-f6bbb57e9c96
into it again (adding generic CBI support). It is so much of a copy even that it
still claimed to have the original 3 support descriptors while in fact it only
has one. Since the memory beyond that one support descriptor was probably just
zeros, making them complete wildcards usb_support_descriptor wise, this lead to
every single USB device being handed to the usb_floppy device added hook.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42145 a95241bf-73f2-0310-859d-f6bbb57e9c96
partition_module_info::uninitialize().
* Implemented the hook for BFS.
* Implemented KFileSystem::Uninitialize().
Fixes failure to initialize a BFS initialized device with an intel partition
map.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42142 a95241bf-73f2-0310-859d-f6bbb57e9c96
destroy the partitioning system's on-disk structure.
* Adjusted the existing partitioning system implementations accordingly.
Actually implemented the hook for the intel partitioning system.
* Added Uninitialize() method to KDiskSystem and KPartitioningSystem. The latter
implements the method calling the new module hook.
* _user_uninitialize_partition(): Also let the disk system uninitialize the
on-disk structure.
This fixes the failure to initialize a disk device with BFS, when it contains a
valid partition map with at least one partition.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42140 a95241bf-73f2-0310-859d-f6bbb57e9c96
which don't wait for a character, but return -1 when no character is
available ATM. Implemented correctly for x86 only.
* Changed the semantics of the debugger_module_info::debugger_getchar() hook.
It is supposed to return immediately now.
* Adjusted usb_keyboard accordingly. Hacked UHCI's debug_process_transfer() to
achieve that. It does now start, check, or cancel a transfer. Split
UHCI::ProcessDebugTransfer() into StartDebugTransfer(), and
CheckDebugTransfer() accordingly, and also added a CancelDebugTransfer().
The latter seems to have issues. Michael, please have a look. I have no clue
what I'm doing. :-)
* Adjusted kgetc() to poll all possible inputs using the new
functions/semantics. This allows to use any input (USB, PS/2, serial) in KDL.
* Removed the no longer needed "serial_input" command.
* read_line(): Also support 0x7f as backspace code. That's what xterm sends.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42126 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Would be nice to only show this when an extra argument had been passed to
checkfs, but I'm afraid the API is somewhat limited, not to say pretty much
unusable for the task.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42125 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reorganized the kernel locking related to threads and teams.
* We now discriminate correctly between process and thread signals. Signal
handlers have been moved to teams. Fixes#5679.
* Implemented real-time signal support, including signal queuing, SA_SIGINFO
support, sigqueue(), sigwaitinfo(), sigtimedwait(), waitid(), and the addition
of the real-time signal range. Closes#1935 and #2695.
* Gave SIGBUS a separate signal number. Fixes#6704.
* Implemented <time.h> clock and timer support, and fixed/completed alarm() and
[set]itimer(). Closes#5682.
* Implemented support for thread cancellation. Closes#5686.
* Moved send_signal() from <signal.h> to <OS.h>. Fixes#7554.
* Lots over smaller more or less related changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42116 a95241bf-73f2-0310-859d-f6bbb57e9c96
problems on various systems. Resolves#3441. Thanks!
+alpha3
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42104 a95241bf-73f2-0310-859d-f6bbb57e9c96
AcquireReference() now does, and adjust all callers that relied on the previous
return type.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42091 a95241bf-73f2-0310-859d-f6bbb57e9c96
only halfway finished. The way it is supposed to work is that there are two
tty cookies, representing the system and the device side. Reads and writes
coming from the system and going to the device are using the system cookie
while reads and writes coming from the device use the device cookie.
* Move writing to the device into an output thread, similar to how reading from
the device works. This isn't necessarily a good idea and might be moved back
into the write hook again to ensure that writes can be made blocking. Right
now if you just write and then close, the writes will most likely be canceled
before every going out to the device.
* Removed the read and write lock mutex. They aren't necessary as the tty layer
will serialize the reads and writes anyway.
* Made simply copying the data to the write buffer the default implementation of
the OnWrite callback and removed the OnWrite in ACMDevice. The ProlificDevice
didn't provide an OnWrite hook before, so it would've never written anything.
* Break out the baud index to speed mapping into an inline function. Since the
defines might change in termios.h just adding an array is a bit fragile (it
already missed one entry and would've been broken for certain speeds).
This should make usb_serial usable for some (most?) cases. I've tested this with
an Arduino board that uses an FTDI interface. As mentioned above, since writes
currently just write into the tty layer and don't wait for the data to be
flushed, and since close doesn't wait for the output buffers to be drained
either, a simple write and close (as in "echo a > /dev/ports/usb0") will in most
cases cancel the output before it is written to the device. I'm looking into
a few ways to fix that next.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42089 a95241bf-73f2-0310-859d-f6bbb57e9c96
header is used that only has 6 bits of length info this would've previously
potentially overflowed depending on the input size.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42088 a95241bf-73f2-0310-859d-f6bbb57e9c96
is inside the cflags) since stty for example sets them.
* Turn off debug output by default and fix a warning due to that.
* Some minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42087 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Begin using multi-architecture friendly formatting macros per ML
* Change uint32 snoozeTime to preferred bigtime_t per ML
* Thanks for the great feedback!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42062 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add additional tracing to usb_disk lun inquiry
* cd and other optical disk devices can take some time to spin up
when plugged. Now we give them some time to do so to ensure we
can detect the media type properly if there is a cd in the drive.
Things non-mechanical (flash drives) will continue almost immediately
as there is no spin up time. The more attempts, the longer the wait.
We now try 7 times (28 seconds total), my modern usb cdrom takes
about 6 (21 seconds) of those cycles to be ready on power up and 4
(10 seconds) on media change while powered up.
* tested with usb media and cd media. Doesn't introduce any visible
delay to the user.
* the write protected status in lun is now correct for my usb cd device
on plug (it wasn't previously)
* still seeing it though as read/write. Looking at this now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42058 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made MessageIO comply to our coding style.
* No other functional change (intended).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42055 a95241bf-73f2-0310-859d-f6bbb57e9c96
always calling the device and requesting it. If no HID descriptor is found in
the configuration we fall back to retrieving it manually and if that fails we
fall back to a dummy report descriptor length. In the most usual case this will
save one unnecessary USB control request.
Incidentally this also fixes the absolute pointing device under VirtualBox. VBox
stalled the retrieval of the HID descriptor. That alone wasn't so problematic as
in this case we just fell back to the dummy report descriptor length which
would've been large enough. But VBox also times out the next request after the
stall, which in this case was the retrieval of the report descriptor, hence no
HIDDevice could be created.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42019 a95241bf-73f2-0310-859d-f6bbb57e9c96
* As they don't claim to be HID, they don't provide a report descriptor either,
so we build one. The built descriptor is similar to the one found in FreeBSD
for the same class of devices. Might fix/help #7649, for lack of hardware I
can't test this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42003 a95241bf-73f2-0310-859d-f6bbb57e9c96
usb_hid_device_added hook so that we can actually detect non-HID devices at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42002 a95241bf-73f2-0310-859d-f6bbb57e9c96
allow for creating descriptors that don't use report IDs at all.
* Adjust sixaxis_build_descriptor and set the global report ID once at the
beginning instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42001 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add these to the usb_support_descriptor when adding from the quirky devices.
* Extend the SIXAXIS comment a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42000 a95241bf-73f2-0310-859d-f6bbb57e9c96
descriptor. This allows us to support devices that aren't strictly HID or only
provide vendor specific interfaces by constructing report descriptors for their
data format.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41992 a95241bf-73f2-0310-859d-f6bbb57e9c96
absolute coordinates (qemu/kvm -usbdevice tablet) and various digitizers. If a
tablet-like usage is determined the MouseProtocolHandler publishes to
input/tablet instead of input/mouse and reports its info in a tablet_movement
structure instead of a mouse_movement structure, allowing for absolute
coordinates. Note that right now only the absolute coordinates are used, the
other tablet specific inputs (eraser, pressure, tilt and contact) aren't yet
filled in. I will add these as a second step.
I've only tested this with kvm where this makes the "seamless" mouse integration
work and therefore fixes#5989. Note that QEMU for BeOS/Haiku doesn't support
that mode (patch pending on my side) and will lock the pointer into the upper
left corner if -usbdevice tablet is used (whereas it previously just did
nothing).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41951 a95241bf-73f2-0310-859d-f6bbb57e9c96
to build a new descriptor using a HIDWriter. This way a completely new
descriptor can be built on the fly or a fixed already patched blob can be
written to the writer if desired.
* Implemented writing a new report descriptor for Sony SIXAXIS controllers. The
descriptor also includes the pressure sensitive button states (exposed as 12
axes) and the accelerometers/gyroscope (exposed as another 4 axes). While the
motion sensing data is now available (and fun to look at), the usefulness is
fairly limited, as the values are not scaled/transformed in any way. It might
be possible to generically do such transformations using unit descriptions,
but those are not implemented yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41925 a95241bf-73f2-0310-859d-f6bbb57e9c96
duplicate usages and simply adds more axes in that case. It also removes the
gaps that were previously put in place if there were higher numbered axes.
However, since the ordering of the axes now depends on the ordering inside the
HID collection, it is possible that some controllers won't have the X, Y and Z
axis mapped as the first three axes, which might confuse applications. I've not
encountered a report structure that would lead to such a situation yet, but then
again the amount of reports I was able to get hold of is fairly limited. If it
becomes a problem the mapping needs to be adjusted accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41923 a95241bf-73f2-0310-859d-f6bbb57e9c96
report descriptors. These descriptors aren't optimized for efficiency (the
writer doesn't attempt to avoid writing unneeded global items for example) but
they will only serve as input for the HIDParser that parses them correctly
regardless.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41921 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Only cancel the update thread if the last open instance is closed. This fixes
that other applications using the same joystick would stop getting updated
values as soon as one application was closed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41905 a95241bf-73f2-0310-859d-f6bbb57e9c96
function that is triggered before the protocol handlers are added.
* Use the quirky device mechanism to support the Sony SIXAXIS controller (the
PS3 one). It requires a specific get_report to become operational. Note that
you still have to push the PS button to enable it after plugging in. Note also
that only the two analog sticks are reported as axis, the analog values of the
buttons as well as the motion sensors aren't described by the HID descriptor
and therefore aren't accessible. The digital button states (on/off only) work
however. A fixed descriptor could possibly be crafted to support the missing
features later on though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41902 a95241bf-73f2-0310-859d-f6bbb57e9c96
handlers. A full sized keyboard is assumed when LEDs are found and those are
preferred then. This makes USB keyboards work (at least those that worked
by voluntarily entering KDL before, i.e. those that are hooked up to UHCI root
ports) also when entering KDL by means of a panic. The first (few) keys are
swallowed though, but that's certainly better than it not working at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41898 a95241bf-73f2-0310-859d-f6bbb57e9c96
both, variable and extended joystick mode, using the same mechanism of mimicing
the extended_joystick structure with the variable one if required. The mode
used depends on the support flag coming in from BJoystick (currently off), so
with this commit the behaviour doesn't change. I'm going to flip that switch
next though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41891 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fixed some coding style and a few sanity checks where it make sense.
This driver code is not in a good shape and needs a wide cleanup.
unfortunatly, I still don't have any device to test with, so I can't do that anytime soon.
Intead of letting his patch collecting dust since 3 months (my bad),
I think it's better the multi-port support gets at least more exposure than
just Pete's hardware.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41874 a95241bf-73f2-0310-859d-f6bbb57e9c96
with the BJoystick requirements:
* Make the Read() non-blocking. This is required as BJoystick is a polling
interface. A single current state is used that is updated by a separate thread
on report arrival. The thread is spawned as soon as the ProtocolHandler is
opened for the first time (and quit at the first wait return after the
ProtocolHandler is closed). With this we can simply return the current state
on read.
* Remove the ring buffer as it was not needed in the first place. This also
happens to solve the problem of sharing a JoystickProtocolHandler. Before,
concurrent reads would queue up the same result multiple times in the ring
buffer and then return stale data on the next update.
Solves most of #7629.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41865 a95241bf-73f2-0310-859d-f6bbb57e9c96
ever wait for reports on demand, there's no need for buffering at all.
This removes some unnecessary copying and ring buffer overhead, the ring buffer
will now in fact not be created at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41864 a95241bf-73f2-0310-859d-f6bbb57e9c96
This includes input scaling, so the resulting input ranges should always match
the ones of the BJoystick data (hence no calibration should be required).
* It supports joysticks, gamepads and multi-axis controllers. I've only tested
it with a Microsoft SideWinder Gamepad Pro so far, which now works as expected
with stickit.
* Fixes#7429.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41851 a95241bf-73f2-0310-859d-f6bbb57e9c96
is loaded. SMTP and POP still have this problem! TODO: use the ServerConnection class in these add-ons too.
This would also remove a lot of #ifdef SSL form these add-ons. Will not do it in the near future, feel free to fix it
...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41840 a95241bf-73f2-0310-859d-f6bbb57e9c96
of returning B_ERROR to the ProtocolHandler base class. Not used yet, but will
be used for the BJoystick <-> JoystickProtocolHandler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41835 a95241bf-73f2-0310-859d-f6bbb57e9c96
Remove extra ssl lock, there is already one in ssl.
This fixes#7574. I have seen this or a similar bug before and it was quit reproduceable, now it seems to be fixed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41828 a95241bf-73f2-0310-859d-f6bbb57e9c96
