* make shared memory info naming clearer.
* move frame buffer internal offset read to driver
* remove check of > 512MB as we really should always use frame_buffer_size
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41569 a95241bf-73f2-0310-859d-f6bbb57e9c96
* remove device_type and replace with device_chipset
* change MEMSIZE to >> 10 as r600-r700 store this in bytes (r800 uses MB and will be fixed soon)
* add if statement to select what register locations to use based on chipset
** Maybe use a struct or something to store these in a standardized way?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41525 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add boot item support to radeon hd driver
* add edid storage to shared info
* add pull of active monitor VESA EDID to radeon hd driver (until AtomBios complete)
* EDID pulled in driver now passed to create_display_modes
* move registers to external stock xorg radeon hd register headers (lic. allows it)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41411 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add a INTEL_TYPE_915M type to be used by 0x2592 (mobile version)
* 0x2e32 is actually non mobile, added its brothers 0x2e02, 0x2e12, 0x2e22, 0x2e42, 0x2e92
* 0x27a2 is actually mobile.
* added 0x2972, 0x2982, 0x2992 for INTEL_TYPE_965 type, and 0x2a12 for INTEL_TYPE_965M.
* added corresponding entries in intel_gart.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40838 a95241bf-73f2-0310-859d-f6bbb57e9c96
* whitespace cleanup and renamed log2() to radeon_log2 (conflicts with log2 in math.h)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39620 a95241bf-73f2-0310-859d-f6bbb57e9c96
few warnings. Thanks! I did not apply the hunks about moving
a logging function in the common accelerant code to be static.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39320 a95241bf-73f2-0310-859d-f6bbb57e9c96
This allows to use lower resolution screen modes with black border.
Added a set of TODOs :
* The smaller scren is not centered, but aligned top-left
* The base resolution used is the one reported from edid 1.1, because I'm still not sure how to parse EDID 1.2. This resolution is too small on my laptop, but it works.
Also added two ways of setting 8-to-6 dithering for 18-bit LVDS panel. No visible result for me, unfortunately.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38354 a95241bf-73f2-0310-859d-f6bbb57e9c96
Supports Banshee, Voodoo3 and Voodoo5 chips.
It will be promoted as older tdfx replacement soon, but not until
my small changes around phys_addr_t are validated.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37241 a95241bf-73f2-0310-859d-f6bbb57e9c96
map_physical_memory()'s physicalAddress parameter type from void* to
phys_addr_t. This breaks source compatibility, but -- as long as
phys_{addr,size}_t remain 32 bit wide -- keeps binary compatibility with
BeOS.
* Adjusted all code using the affected interfaces (Oh what fun!). Added a few
TODOs in places where the wrong types (e.g. void* for physical addresses
are used). Looks like quite a few drivers aren't 64 bit safe and others
will break with PAE.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36960 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added header for dealing with binary numbers and bitmasks (C++ templates)
these "macro's" might not work well for long words, though
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33749 a95241bf-73f2-0310-859d-f6bbb57e9c96
I've now removed that code, and factored out a retrieve_current_mode()
function that can work on head A and B.
* This fixes Adrien's flickering problem on his laptop - I can't find the
bug ticket, though. Hopefully it does not break other laptop chips. Testing
would be welcome, as I don't have any other machine here.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33633 a95241bf-73f2-0310-859d-f6bbb57e9c96
device is not compatible, after all.
* No longer accept color changes if the mode is not an 8 bit one. I think that
BWindowScreen does that after changing the mode, so that is messes up the
colors, at least that's the theory, will test on real iron now.
* Use VGA as a fallback if setting the palette via VBE failed. This brings back
the colors for ParticlesII in Qemu (but not in VirtualBox, which seems to be
completely broken in this regard).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32359 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The vesa driver no longer uses VGA programming if the chip does not support
VGA compatibility.
* The VESA driver now tries to set the DAC to 8 bits per color gun.
* In VESA modes, the driver no longer tries to use VGA programming; introduced
the new vesa_set_indexed_colors() that is now used for palette programming.
This should fix wrong colors of 8 bit BWindowScreen users with VESA on real
hardware (emulators usually didn't mind either way).
* Note that the app_server needs to maintain a palette per 8 bit screen, as
right now, the colors are garbled after a workspace switch. Stefano, are you
looking into that already?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32347 a95241bf-73f2-0310-859d-f6bbb57e9c96
be broken in the app_server now, but I haven't checked yet.
* Fixed typo in vesa.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32141 a95241bf-73f2-0310-859d-f6bbb57e9c96
mode informations are available.
* This is passed to the graphics card when the mode is set in the hopes that it
will be more conforming.
* Not yet tested on real hardware, though, therefore the VESA driver doesn't
do anything like this yet. I will test next, but please report any problems
with this nonetheless.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28390 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The hardware cursor is now disabled at 640x480 with a Virge VX (before it
was just invisible).
* EDID info can now be read for all S3 chips.
* For the Savage IX, Savage MX, and SuperSavage chips the display is no
longer expanded to fill a laptop LCD display when the mode resolution is
less than the size of LCD display.
* Savage IX, Savage MX, and SuperSavage chips will now display mode
1400x1050 on a 1400x1050 laptop LCD display. Previously the display was
blank at that resolution.
* Previously about half the Savage chips would not draw properly at
1400x1050. That is, the image was badly skewed and unusable. All of
them now draw properly at 1400x1050.
* Some code was reorganized to remove unnecessary and redundant code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27863 a95241bf-73f2-0310-859d-f6bbb57e9c96
be put into a boot_item in frame_buffer_console_init().
* The VESA driver now supports gettings the EDID information as well; this
is necessary now, since the app_server no longer takes over the mode the
boot loader had chosen.
* Note, we might want to do this via vm86 instead in the future, and remove
the kernel part again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25786 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use vm86 mode to call the VESA BIOS to do the actual mode switching by
providing an ioctl in the vesa driver.
* Fix vm86.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25680 a95241bf-73f2-0310-859d-f6bbb57e9c96
Gerald Zajac. Thanks a lot!
* Also put it on the image by default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25583 a95241bf-73f2-0310-859d-f6bbb57e9c96
we now always only use the primary ring buffer.
* Removed secondary ring buffer allocation and member fields.
* Increased size of the primary ring buffer to 65536 bytes.
* The bytes per row register is computed differently for 9xx chips.
* On G33, the overlay does not need a physical address anymore, so we
don't pass B_APERTURE_NEED_PHYSICAL to the allocation anymore for that
device.
* intel_free_memory() accidently added the aperture base to the allocation
and would therefore never free any memory.
* INTEL_RING_BUFFER_SIZE_MASK was shifted one bit to the right, didn't
cause any harm with our buffer sizes, yet, though.
* With these changes, the driver runs stable on a G33 chipset (I have not
yet tested the hardware cursor, though, it might need some work, too).
The only known issue left is that overlay flickers a bit if its buffer
is partially backed up by reserved and allocated memory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23798 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed "physical" parameter of GART's bind_aperture() - I don't think this
be of use to anyone.
* Fixed binding/unbinding pages in the Intel GART driver; I accidently shifted
the page offset twice.
* Actually forgot handling of allocated memory in Aperture::BindMemory().
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23796 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Now uses the AGP GART module for memory management. This greatly simplifies
the memory handling, and memory is now actually allocated on demand,
instead of a fixed size (stolen memory is not freed, though).
* The Intel GART module should now also work with older chipsets.
* No longer remove the GTT size from the stolen memory; this appears to have
been a mistake in the X driver. Not sure about the BIOS popup yet.
* The AGP module (in combination with the Intel GART module) is now mandatory
to use the Intel driver.
* Removed now superfluous settings (like memory size). Only enabling/disabling
the hardware cursor is still supported.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23781 a95241bf-73f2-0310-859d-f6bbb57e9c96
* It now also serves as a generic GART manager and accepts bus modules as well
as custom modules of graphics drivers if they want to (could be used for the
Radeon PCI GART stuff, for example).
* Implemented GART support module for Intel i965 and G33 chipsets (the other
Intel chips will come later).
* Renamed agp bus manager to agp_gart to reflect its new functionality (even
though the AGP functionality is already outdated (due to PCIe), the GART
stuff remains current).
* Adapted existing users of the AGP bus manager to the API changes.
* Not very well tested yet...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23754 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added some defines needed when playing with the bridge controller.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23753 a95241bf-73f2-0310-859d-f6bbb57e9c96
* set_gtt_entry() used the wrong index to fill the GTT - this could have never
worked correctly when you specified more memory than the amount of stolen
memory.
* Implementing maintaining resources for emulating overlay using the 3D engine
on i965. I don't yet commit the actual overlay code, as that is a) ugly, and
b) does not work yet.
* Moved AreaKeeper into its own header.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23709 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented mapping the GTT area for i9xx chips other than the i965. This should also fix the
driver working with these chips at all.
* The memory used by the driver now take the GTT area into account - before the GTT could be
overwritten theoretically...
* Added fix for some i965 quirks from the X driver.
* Added some overlay definitions for the i965.
* Started support for G33 overlay (not complete yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23220 a95241bf-73f2-0310-859d-f6bbb57e9c96
- in order to set cursor position SVGA_CURSOR_ON_SHOW has to be written to register SVGA_REG_CURSOR_ON.
- do not use alpha cursor because it does not support inverting of source pixels.
- Fixed wrong usage of if-statement inside switch-statement
- Sync at end of SCREEN_TO_SCREEN_BLIT so that app_server does not write to frame buffer while accelerated operation is still running.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23193 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented MakeSpace() (not yet tested).
* Changed intel_wait_engine_idle() to spin() between reads and to timeout
after 1 second of waiting (could probably be done way earlier).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23120 a95241bf-73f2-0310-859d-f6bbb57e9c96
acceleration works fine, but overlay doesn't - that's next on my list.
Turns out the i965 differentiates between RGB-32 and RGB-32-alpha, and
didn't like trying to use the latter as display mode (the i865 didn't
care at all)... finding that took me *way* too long, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22780 a95241bf-73f2-0310-859d-f6bbb57e9c96
will happen on earlier i9xx chips for now...). Not yet tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22589 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Now supports the new B_GET_EDID_INFO hook under Haiku.
* Fixed build under BeOS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22551 a95241bf-73f2-0310-859d-f6bbb57e9c96
to create their mode list. Once it's done, it should cover all possible cases,
and allow the base mode list to reside in the app_server (under Haiku, at least),
so that all drivers will benefit from an updated list.
Right now, it might already work to a degree, but it's not yet tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22517 a95241bf-73f2-0310-859d-f6bbb57e9c96
not take the VCO limits into account; both could (and would during testing) create invalid
frequencies.
* Also reverted the order in which the PLL divisors are traversed to match the order of what
is used in the X driver to create comparable output (our error computation is based on float,
though, and should therefore create more accurate values).
* The i965 introduced a special register for the surface; the former display base register
is now only used for the view offset. Instead of setting the base manually here and there,
there is now a set_frame_buffer_base() function.
* The DPMS code will now also turn off/on the PLL clock generator.
* The code needs some more cleanup, and while the driver now produces the correct timing on
my i965 system, I'm now greeted by a black screen after startup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22289 a95241bf-73f2-0310-859d-f6bbb57e9c96
nothing is done with the data yet (besides dumping them to the serial output).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22272 a95241bf-73f2-0310-859d-f6bbb57e9c96
* i2c_bus now contains a i2c_timing structure, so that you don't need
both to talk to the I2C bus.
* Therefore, there is now a void ddc2_init_timing() function to get the
the timing DDC needs.
* Cleanup in radeon's monitor_detection.c, and updated it to work with
the DDC/I2C changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22265 a95241bf-73f2-0310-859d-f6bbb57e9c96
this should fix bug #1293.
I've tested it here on two machines, one works better now, the other stayed the
same (Radeon 9250, and a laptop FireGL (id 4c66) version). This apparently also
fixed bug #1394.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21930 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a TRACE_S3SAVAGE macro that turns on debug output - should be set conditionally
if DEBUG is defined (see DriverInterface.h), but is currently always on, as requested
by Gerald.
* Some minor style fixes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21492 a95241bf-73f2-0310-859d-f6bbb57e9c96
fixed warnings and code style. Please, from now on, provide *patches* to this version.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21421 a95241bf-73f2-0310-859d-f6bbb57e9c96
Implemented SetIndexedColors hook, although not really correct.
I don't know why the driver's 8 bit mode were disabled. They seem to
work fine. I had to enable at least 640x480x8 to be able to test
WindowScreen. There are some TODOs in the code. I'll look into them
later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21410 a95241bf-73f2-0310-859d-f6bbb57e9c96
correctly.
* Got rid of this superfluous cookie stuff - either the VFS behaves correctly, or
we're screwed anyway.
* Made adding debugger commands optional depending on if DEBUG_COMMANDS is defined
or not.
* Minor other cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21322 a95241bf-73f2-0310-859d-f6bbb57e9c96
doesn't work on i965 yet.
* B_GET_DISPLAY_MODE now returns the mode actually configured in the chip instead
of the last mode set; while this isn't really necessary, it allows to check what
mode was used during startup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21321 a95241bf-73f2-0310-859d-f6bbb57e9c96
also renamed their accelerants and settings files accordingly.
* Added Mandelbrot and GLDirectMode as demo applications.
* Moved CortexAddOnHost to /bin.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21010 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use AGP Bus manager module
* Fixed wrong framebuffer address computation; this should fix bug #1079.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20336 a95241bf-73f2-0310-859d-f6bbb57e9c96
