Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5254ca51fa
NetBSD/sys/conf/files

1577 lines
35 KiB
Plaintext
Raw Normal View History

Add PAX_MPROTECT_DEBUG
2016-04-12 14:51:08 +03:00
# $NetBSD: files,v 1.1154 2016/04/12 11:51:08 christos Exp $
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# @(#)files.newconf 7.5 (Berkeley) 5/10/93
Make config(1) output only ${ALLFILES}, selected input files, and pass it to Makefile.kern.inc, where files are filtered by suffix.
2015-09-04 09:10:47 +03:00
version 20150846
Require a config(1) supporting syntax version 20060604 now that we use the "obsolete" statement.
2006-08-27 19:44:16 +04:00
Move netinet, netinet6, ipsec, and ipfilter config defns to netinet/files.ipfilter, etinet/files.netinet, netinet6/files.netinet6, and netinet6/files.netipsec. XXX There are still a few stragglers in conf/files, which are entangled with other network protocols.
2002-10-11 02:45:45 +04:00
#
# device classes
#
devclass disk
devclass tape
devclass ifnet
devclass tty
Merge jmcneill-pm branch.
2007-12-09 23:27:42 +03:00
devclass audiodev
devclass displaydev
devclass bus
Move netinet, netinet6, ipsec, and ipfilter config defns to netinet/files.ipfilter, etinet/files.netinet, netinet6/files.netinet6, and netinet6/files.netipsec. XXX There are still a few stragglers in conf/files, which are entangled with other network protocols.
2002-10-11 02:45:45 +04:00
Make KMEMSTATS a "header option".
1997-02-03 00:16:25 +03:00
# options understood by the machine-independent part of the kernel
# (note, these are case-sensitive)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Convert MAXUSERS, take 2. Define MAXUSERS in opt_param.h and include it from sys/param.h, for more accurate dependency. Don't define -DMAXUSERS and add it to ${CPPFLAGS}. config(5)'s "maxusers" syntax doesn't change. (The version just before revert was OK, but I had something bad in my obj dirs.)
2015-08-29 17:07:45 +03:00
defparam opt_param.h MAXUSERS
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag INSECURE
merge FreeBSD timecounters from branch simonb-timecounters - struct timeval time is gone time.tv_sec -> time_second - struct timeval mono_time is gone mono_time.tv_sec -> time_uptime - access to time via {get,}{micro,nano,bin}time() get* versions are fast but less precise - support NTP nanokernel implementation (NTP API 4) - further reading: Timecounter Paper: http://phk.freebsd.dk/pubs/timecounter.pdf NTP Nanokernel: http://www.eecis.udel.edu/~mills/ntp/html/kern.html
2006-06-08 02:33:33 +04:00
defflag KMEMSTATS
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag KTRACE
merge FreeBSD timecounters from branch simonb-timecounters - struct timeval time is gone time.tv_sec -> time_second - struct timeval mono_time is gone mono_time.tv_sec -> time_uptime - access to time via {get,}{micro,nano,bin}time() get* versions are fast but less precise - support NTP nanokernel implementation (NTP API 4) - further reading: Timecounter Paper: http://phk.freebsd.dk/pubs/timecounter.pdf NTP Nanokernel: http://www.eecis.udel.edu/~mills/ntp/html/kern.html
2006-06-08 02:33:33 +04:00
defflag MBUFTRACE
Make PTRACE and COREDUMP optional. Make the default (status quo) by putting them in conf/std.
2006-08-30 03:34:48 +04:00
defflag PTRACE
defflag COREDUMP
Create an "options MODULAR_DEFAULT_AUTOLOAD" config option and add it to all kernel configs that contain "options MODULAR". This option turns on module autoloading by default (which is the current default). This allows people who don't want module autoloading on by default to disable it by simply removing/commentting this line.
2014-08-24 11:59:22 +04:00
defflag opt_modular.h MODULAR
defflag opt_modular.h MODULAR_DEFAULT_AUTOLOAD
Add support for multi-position electro-mechanical keylocks. An example driver, gpiolock(4), is provided as an example how to interface real hardware. A new securemodel, securemodel_keylock, is provided to show how this can be used to tie keylocks to overall system security. This is experimental code. The diff has been on tech-kern for several weeks. Reviewed by many, kauth(9) integration reviewed by Elad Efrat; approved by tonnerre@ and tron@. Thanks to everyone who provided feedback.
2009-08-15 01:17:21 +04:00
defflag KEYLOCK
Define CHILD_MAX/OPEN_MAX as parameters.
2015-08-21 10:19:39 +03:00
defparam opt_syslimits.h CHILD_MAX OPEN_MAX
Generate opt_diagnostic.h for DIAGNOSTIC; define unused _DIAGNOSTIC until thoroughly populated.
2015-08-30 10:52:30 +03:00
defflag opt_diagnostic.h _DIAGNOSTIC
Make PTRACE and COREDUMP optional. Make the default (status quo) by putting them in conf/std.
2006-08-30 03:34:48 +04:00
Use makeoptions_COPY_SYMTAB via opt_copy_symtab.h in sources. Remove a hack to set -DCOPY_SYMTAB from sys/conf/Makefile.kern.inc. Remove unnecessary dependencies too.
2015-08-30 04:46:02 +03:00
defparam opt_copy_symtab.h makeoptions_COPY_SYMTAB
merge FreeBSD timecounters from branch simonb-timecounters - struct timeval time is gone time.tv_sec -> time_second - struct timeval mono_time is gone mono_time.tv_sec -> time_uptime - access to time via {get,}{micro,nano,bin}time() get* versions are fast but less precise - support NTP nanokernel implementation (NTP API 4) - further reading: Timecounter Paper: http://phk.freebsd.dk/pubs/timecounter.pdf NTP Nanokernel: http://www.eecis.udel.edu/~mills/ntp/html/kern.html
2006-06-08 02:33:33 +04:00
defparam DEFCORENAME
defparam HZ
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam MAXUPRC
defparam RTC_OFFSET
use opt_pipe.h for PIPE_SOCKETPAIR, add PIPE_NODIRECT there too
2002-02-11 21:03:00 +03:00
defflag opt_pipe.h PIPE_SOCKETPAIR PIPE_NODIRECT
Generate dependencies for the TCP_SENDSPACE and TCP_RECVSPACE options.
1997-07-29 02:31:08 +04:00
- Conditionalise POSIX aio and mqueue, but include them by default. - Add a COMPAT_NETBSD attribute. Emit if any compat options are used.
2008-11-15 02:28:30 +03:00
defflag AIO
defflag MQUEUE
- defflag bufq_fcfs and bufq_disksort. - make them on by default.
2005-09-26 18:14:26 +04:00
defflag BUFQ_DISKSORT
defflag BUFQ_FCFS
lookup bufq using link_set rather than a switch statement.
2004-11-25 07:52:23 +03:00
defflag BUFQ_PRIOCSCAN
defflag BUFQ_READPRIO
defflag NEW_BUFQ_STRATEGY # same as BUFQ_READPRIO
Add option NEW_BUFQ_STRATEGY, a new buffer queue strategy for better system responsiness under high disk I/O load. OK'ed by Juergen Hannken-Illjes.
2002-10-18 18:31:10 +04:00
merge yamt-idlelwp branch. asked by core@. some ports still needs work. from doc/BRANCHES: idle lwp, and some changes depending on it. 1. separate context switching and thread scheduling. (cf. gmcgarry_ctxsw) 2. implement idle lwp. 3. clean up related MD/MI interfaces. 4. make scheduler(s) modular.
2007-05-17 18:51:11 +04:00
defflag opt_sched.h SCHED_4BSD
Import of SCHED_M2 - the implementation of new scheduler, which is based on the original approach of SVR4 with some inspirations about balancing and migration from Solaris. It implements per-CPU runqueues, provides a real-time (RT) and time-sharing (TS) queues, ready to support a POSIX real-time extensions, and also prepared for the support of CPU affinity. The following lines in the kernel config enables the SCHED_M2: no options SCHED_4BSD options SCHED_M2 The scheduler seems to be stable. Further work will come soon. http://mail-index.netbsd.org/tech-kern/2007/10/04/0001.html http://www.netbsd.org/~rmind/m2/mysql_bench_ro_4x_local.png Thanks <ad> for the benchmarks!
2007-10-09 23:00:13 +04:00
defflag opt_sched.h SCHED_M2
merge yamt-idlelwp branch. asked by core@. some ports still needs work. from doc/BRANCHES: idle lwp, and some changes depending on it. 1. separate context switching and thread scheduling. (cf. gmcgarry_ctxsw) 2. implement idle lwp. 3. clean up related MD/MI interfaces. 4. make scheduler(s) modular.
2007-05-17 18:51:11 +04:00
defparam SOMAXKVA.
2003-07-03 05:42:10 +04:00
defparam SOMAXKVA
Add some experimental page-loaning for writes on sockets. It is disabled by default, and can be enabled by adding the SOSEND_LOAN option to your kernel config. The SOSEND_COUNTERS option can be used to provide some instrumentation. Use of this option, combined with an application that does large enough writes, gets us zero-copy on the TCP and UDP transmit path.
2002-05-02 21:55:48 +04:00
defflag opt_sock_counters.h SOSEND_COUNTERS
Make use of page loaning for large socket writes the default. The SOSEND_NO_LOAN option can be used to go back to the old behavior.
2002-08-21 09:13:36 +04:00
defflag opt_sosend_loan.h SOSEND_NO_LOAN
Eliminate address family-specific route caches (struct route, struct route_in6, struct route_iso), replacing all caches with a struct route. The principle benefit of this change is that all of the protocol families can benefit from route cache-invalidation, which is necessary for correct routing. Route-cache invalidation fixes an ancient PR, kern/3508, at long last; it fixes various other PRs, also. Discussions with and ideas from Joerg Sonnenberger influenced this work tremendously. Of course, all design oversights and bugs are mine. DETAILS 1 I added to each address family a pool of sockaddrs. I have introduced routines for allocating, copying, and duplicating, and freeing sockaddrs: struct sockaddr *sockaddr_alloc(sa_family_t af, int flags); struct sockaddr *sockaddr_copy(struct sockaddr *dst, const struct sockaddr *src); struct sockaddr *sockaddr_dup(const struct sockaddr *src, int flags); void sockaddr_free(struct sockaddr *sa); sockaddr_alloc() returns either a sockaddr from the pool belonging to the specified family, or NULL if the pool is exhausted. The returned sockaddr has the right size for that family; sa_family and sa_len fields are initialized to the family and sockaddr length---e.g., sa_family = AF_INET and sa_len = sizeof(struct sockaddr_in). sockaddr_free() puts the given sockaddr back into its family's pool. sockaddr_dup() and sockaddr_copy() work analogously to strdup() and strcpy(), respectively. sockaddr_copy() KASSERTs that the family of the destination and source sockaddrs are alike. The 'flags' argumet for sockaddr_alloc() and sockaddr_dup() is passed directly to pool_get(9). 2 I added routines for initializing sockaddrs in each address family, sockaddr_in_init(), sockaddr_in6_init(), sockaddr_iso_init(), etc. They are fairly self-explanatory. 3 structs route_in6 and route_iso are no more. All protocol families use struct route. I have changed the route cache, 'struct route', so that it does not contain storage space for a sockaddr. Instead, struct route points to a sockaddr coming from the pool the sockaddr belongs to. I added a new method to struct route, rtcache_setdst(), for setting the cache destination: int rtcache_setdst(struct route *, const struct sockaddr *); rtcache_setdst() returns 0 on success, or ENOMEM if no memory is available to create the sockaddr storage. It is now possible for rtcache_getdst() to return NULL if, say, rtcache_setdst() failed. I check the return value for NULL everywhere in the kernel. 4 Each routing domain (struct domain) has a list of live route caches, dom_rtcache. rtflushall(sa_family_t af) looks up the domain indicated by 'af', walks the domain's list of route caches and invalidates each one.
2007-05-03 00:40:22 +04:00
defflag opt_route.h RTCACHE_DEBUG RTFLUSH_DEBUG
Add some experimental page-loaning for writes on sockets. It is disabled by default, and can be enabled by adding the SOSEND_LOAN option to your kernel config. The SOSEND_COUNTERS option can be used to provide some instrumentation. Use of this option, combined with an application that does large enough writes, gets us zero-copy on the TCP and UDP transmit path.
2002-05-02 21:55:48 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag MULTIPROCESSOR
Introduce defflag for NET_MPSAFE
2015-01-16 13:36:14 +03:00
defflag NET_MPSAFE
defopt MULTIPROCESSOR.
1998-09-24 07:55:15 +04:00
Provide hooks to include the config file(s) in the kernel binary.
2001-12-17 18:40:43 +03:00
defflag opt_config.h INCLUDE_CONFIG_FILE INCLUDE_JUST_CONFIG
Add a kern.dump_on_panic sysctl variable (and documentation, and a kernel config option) that controls whether the kernel dumps to the dump device on panic. Dumps can still be forced via the ``sync'' command from ddb. Defaults to ``on''.
2003-02-10 03:35:15 +03:00
defparam opt_dump.h DUMP_ON_PANIC
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_callout.h CALLWHEEL_STATS
Defopt CALLWHEEL_STATS.
2001-09-13 09:22:16 +04:00
defflag CPU_IN_CKSUM
2008-02-03 16:25:57 +03:00
defflag CPU_IN_CKSUM
Added a defflag option for KDTRACE_HOOKS and included opt_dtrace.h in the relevant files. (Per Quentin Garnier - thanks!).
2010-02-21 10:01:57 +03:00
defflag opt_dtrace.h KDTRACE_HOOKS
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_sysv.h SYSVMSG SYSVSEM SYSVSHM
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
defparam opt_sysvparam.h SHMMAXPGS SEMMNI SEMMNS SEMUME SEMMNU
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-20 02:14:54 +04:00
Extend kernel PPS api with pps_ref_event(). pps_ref_event() allows capturing PPS time stamps that are not generated at precisely 1Hz (e. g. by reading a precision clock via callout()). This extension allows clock drivers to supply PPS time-stamps and drive the kernel NTP PLL without the overhead of interrupt-handling and -processing.
2013-05-26 22:07:42 +04:00
defflag opt_ntp.h PPS_SYNC PPS_DEBUG NTP
defopt NTP and PPS_SYNC, in preparation for adding PPS support.
1998-04-22 11:08:11 +04:00
Update to the split pty driver.
2004-11-10 20:26:16 +03:00
defflag opt_ptm.h NO_DEV_PTM COMPAT_BSDPTY
ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM
2004-06-18 19:02:29 +04:00
Correct NKMEMPAGES_MIN option name.
2005-01-13 23:16:02 +03:00
defparam opt_kmempages.h NKMEMPAGES NKMEMPAGES_MIN NKMEMPAGES_MAX
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_revcache.h NAMECACHE_ENTER_REVERSE
defopt NAMECACHE_ENTER_REVERSE
2001-03-30 02:40:06 +04:00
defflag DEBUG_EXEC
2011-08-26 23:07:13 +04:00
defflag opt_exec.h DEBUG_EXEC
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_execfmt.h EXEC_AOUT EXEC_COFF EXEC_ECOFF EXEC_ELF32
Remove Darwin, MACH and Mach-O support.
2011-04-26 19:51:22 +04:00
EXEC_ELF64 EXEC_SCRIPT
rename EXEC_ELF_CATCHALL to EXEC_ELF_NOTELESS
2002-03-23 12:40:55 +03:00
EXEC_ELF_NOTELESS
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
Work-in-progress implementation of "wedges", a new way to represent partitions in the NetBSD kernel. See discussion on tech-kern for details.
2004-09-25 07:30:44 +04:00
defflag opt_dkwedge.h DKWEDGE_AUTODISCOVER
Add a parsing module for 4.4BSD/NetBSD disklabels. This module supports disklabels nested inside an MBR "NetBSD" or "386BSD" partition (first one found is considered authoritative for the disk), or in one of several known locations for various NetBSD platforms. It can read native or other- endian disklabels (code is there, but not tested). If you want to play with this, exercise caution; you can't currently mountroot on a wedge (setroot() needs some work). Enabled by the DKWEDGE_METHOD_BSDLABEL kernel option.
2004-10-04 05:16:39 +04:00
DKWEDGE_METHOD_BSDLABEL
Break out the wedge discovery methods into true modules, and add some infrastructure that allows new ones to be added. The discovery methods are prioritized, and only one can exist at a given priority. The DKWEDGE_METHOD_GPT option causes GPT support to be included. GPT is at priority 0; we prefer GPT above all others.
2004-10-01 09:16:04 +04:00
DKWEDGE_METHOD_GPT
MBR partition table support for wedges, enabled by the DKWEDGE_METHOD_MBR option.
2004-10-23 21:25:14 +04:00
DKWEDGE_METHOD_MBR
Add apple autodiscovery.
2012-04-07 09:36:49 +04:00
DKWEDGE_METHOD_APPLE
Work-in-progress implementation of "wedges", a new way to represent partitions in the NetBSD kernel. See discussion on tech-kern for details.
2004-09-25 07:30:44 +04:00
some fixes: - adapt to NVERIEXEC in init_sysctl.c. - we now need "veriexec.h" for NVERIEXEC. - "opt_verified_exec.h" -> "opt_veriexec.h", and include it only where it is needed.
2006-07-24 20:37:28 +04:00
defflag opt_veriexec.h VERIFIED_EXEC_FP_SHA1
Defopt VERIFIED_EXEC*
2005-07-17 02:50:15 +04:00
VERIFIED_EXEC_FP_SHA256
VERIFIED_EXEC_FP_SHA384
VERIFIED_EXEC_FP_SHA512
VERIFIED_EXEC_FP_MD5
VERIFIED_EXEC_FP_RMD160
Create a linker map file. Very useful when trying to find out where recent 'bloat' has come from, as well as giving exact details of what is actually in the kernel.
2006-08-25 01:23:40 +04:00
# Per system call number counts and times
defflag opt_syscall_stats.h SYSCALL_STATS
drop trailing whitespace
2013-06-24 20:19:43 +04:00
defflag opt_syscall_stats.h SYSCALL_TIMES: SYSCALL_STATS
Create a linker map file. Very useful when trying to find out where recent 'bloat' has come from, as well as giving exact details of what is actually in the kernel.
2006-08-25 01:23:40 +04:00
# Assume cpu_hascounter() returns true - to use disabled rdtsc() (for soekris)
drop trailing whitespace
2013-06-24 20:19:43 +04:00
defflag opt_syscall_stats.h SYSCALL_TIMES_HASCOUNTER: SYSCALL_TIMES
Create a linker map file. Very useful when trying to find out where recent 'bloat' has come from, as well as giving exact details of what is actually in the kernel.
2006-08-25 01:23:40 +04:00
file kern/subr_syscall_stats.c syscall_stats
Introduce PaX MPROTECT -- mprotect(2) restrictions used to strengthen W^X mappings. Disabled by default. First proposed in: http://mail-index.netbsd.org/tech-security/2005/12/18/0000.html More information in: http://pax.grsecurity.net/docs/mprotect.txt Read relevant parts of options(4) and sysctl(3) before using! Lots of thanks to the PaX author and Matt Thomas.
2006-05-16 04:08:24 +04:00
defparam opt_pax.h PAX_MPROTECT
Add PAX_MPROTECT_DEBUG
2016-04-12 14:51:08 +03:00
PAX_MPROTECT_DEBUG
Initial implementation of PaX Segvguard (this is still work-in-progress, it's just to get it out of my local tree).
2006-11-22 05:02:51 +03:00
PAX_SEGVGUARD
Add PaX ASLR (Address Space Layout Randomization) [from elad and myself] For regular (non PIE) executables randomization is enabled for: 1. The data segment 2. The stack For PIE executables(*) randomization is enabled for: 1. The program itself 2. All shared libraries 3. The data segment 4. The stack (*) To generate a PIE executable: - compile everything with -fPIC - link with -shared-libgcc -Wl,-pie This feature is experimental, and might change. To use selectively add options PAX_ASLR=0 in your kernel. Currently we are using 12 bits for the stack, program, and data segment and 16 or 24 bits for mmap, depending on __LP64__.
2007-12-27 01:11:47 +03:00
PAX_ASLR
PAX_ASLR_DELTA_MMAP_LSB
PAX_ASLR_DELTA_MMAP_LEN
PAX_ASLR_DELTA_STACK_LSB
PAX_ASLR_DELTA_STACK_LEN
PAX_ASLR_DELTA_PROG_LEN
rename DEBUG_ASLR -> PAX_ASLR_DEBUG
2010-03-15 23:35:19 +03:00
PAX_ASLR_DEBUG
Introduce PaX MPROTECT -- mprotect(2) restrictions used to strengthen W^X mappings. Disabled by default. First proposed in: http://mail-index.netbsd.org/tech-security/2005/12/18/0000.html More information in: http://pax.grsecurity.net/docs/mprotect.txt Read relevant parts of options(4) and sysctl(3) before using! Lots of thanks to the PaX author and Matt Thomas.
2006-05-16 04:08:24 +04:00
okay, since there was no way to divide this to two commits, here it goes.. introduce fileassoc(9), a kernel interface for associating meta-data with files using in-kernel memory. this is very similar to what we had in veriexec till now, only abstracted so it can be used more easily by more consumers. this also prompted the redesign of the interface, making it work on vnodes and mounts and not directly on devices and inodes. internally, we still use file-id but that's gonna change soon... the interface will remain consistent. as a result, veriexec went under some heavy changes to conform to the new interface. since we no longer use device numbers to identify file-systems, the veriexec sysctl stuff changed too: kern.veriexec.count.dev_N is now kern.veriexec.tableN.* where 'N' is NOT the device number but rather a way to distinguish several mounts. also worth noting is the plugging of unmount/delete operations wrt/fileassoc and veriexec. tons of input from yamt@, wrstuden@, martin@, and christos@.
2006-07-14 22:41:40 +04:00
defflag opt_fileassoc.h FILEASSOC
Add a mode to gre(4) that sends GRE tunnel packets in UDP datagrams. Fix MOBILE encapsulation. Add many debugging printfs (mainly concerning UDP mode). Clean up the gre(4) code a bit. Add the capability to setup UDP tunnels to ifconfig. Update documentation. In UDP mode, gre(4) puts a GRE header onto transmitted packets, and hands them to a UDP socket for transmission. That is, the encapsulation looks like this: IP+UDP+GRE+encapsulated packet. There are two ways to set up a UDP tunnel. One way is to tell the source and destination IP+port to gre(4), and let gre(4) create the socket. The other way to create a UDP tunnel is for userland to "delegate" a UDP socket to the kernel.
2006-08-31 21:46:16 +04:00
defflag opt_gre.h GRE_DEBUG
Merge the simonb-wapbl branch. From the original branch commit: Add Wasabi System's WAPBL (Write Ahead Physical Block Logging) journaling code. Originally written by Darrin B. Jewell while at Wasabi and updated to -current by Antti Kantee, Andy Doran, Greg Oster and Simon Burge. OK'd by core@, releng@.
2008-07-31 09:38:04 +04:00
# Write Ahead Physical Block Logging
defflag opt_wapbl.h WAPBL WAPBL_DEBUG
defparam opt_wapbl.h WAPBL_DEBUG_PRINT
Merge tls-earlyentropy branch into HEAD.
2014-08-10 20:44:32 +04:00
# printf entropy source
defflag opt_rnd_printf.h RND_PRINTF
defflag TODR_DEBUG
2015-01-11 17:22:53 +03:00
defflag opt_todr.h TODR_DEBUG
defopt COMPAT_FREEBSD
1998-06-26 02:49:18 +04:00
# compatibility options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- Conditionalise POSIX aio and mqueue, but include them by default. - Add a COMPAT_NETBSD attribute. Emit if any compat options are used.
2008-11-15 02:28:30 +03:00
defflag opt_compat_netbsd.h COMPAT_NETBSD
Add COMPAT_70 to conf/files; add compat_70 to kern/syscalls.conf and compat/netbsd32/syscalls.conf.
2014-08-16 21:24:28 +04:00
defflag opt_compat_netbsd.h COMPAT_70: COMPAT_NETBSD
defflag opt_compat_netbsd.h COMPAT_60: COMPAT_70, COMPAT_NETBSD
defopt COMPAT_60, it is already being used
2012-10-18 00:16:59 +04:00
defflag opt_compat_netbsd.h COMPAT_50: COMPAT_60, COMPAT_NETBSD
Remove COMPAT_SA / KERN_SA. Welcome to 6.99.3! Approved by core@.
2012-02-20 01:05:51 +04:00
defflag opt_compat_netbsd.h COMPAT_40: COMPAT_50, COMPAT_NETBSD
- Conditionalise POSIX aio and mqueue, but include them by default. - Add a COMPAT_NETBSD attribute. Emit if any compat options are used.
2008-11-15 02:28:30 +03:00
defflag opt_compat_netbsd.h COMPAT_30: COMPAT_40, COMPAT_NETBSD
defflag opt_compat_netbsd.h COMPAT_20: COMPAT_30, COMPAT_NETBSD
defflag opt_compat_netbsd.h COMPAT_16: COMPAT_20, COMPAT_NETBSD
defflag opt_compat_netbsd.h COMPAT_15: COMPAT_16, COMPAT_NETBSD
defflag opt_compat_netbsd.h COMPAT_14: COMPAT_15, COMPAT_NETBSD
defflag opt_compat_netbsd.h COMPAT_13: COMPAT_14, COMPAT_NETBSD
defflag opt_compat_netbsd.h COMPAT_12: COMPAT_13, COMPAT_NETBSD
defflag opt_compat_netbsd.h COMPAT_11: COMPAT_12, COMPAT_NETBSD
defflag opt_compat_netbsd.h COMPAT_10: COMPAT_11, COMPAT_NETBSD
defflag opt_compat_netbsd.h COMPAT_09: COMPAT_10, COMPAT_NETBSD
add compat_ossaudio
2003-01-19 01:34:23 +03:00
defflag COMPAT_OSSAUDIO
Make freebsd_sys_getfh use compat_30_sys_getfh
2006-07-13 20:28:38 +04:00
defflag COMPAT_FREEBSD: COMPAT_30
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag COMPAT_IBCS2
compat_linux needs at least netbsd_16 for sigcontext.
2009-01-19 02:29:33 +03:00
defflag COMPAT_LINUX: COMPAT_16
COMPAT_LINUX32 requires COMPAT_LINUX.
2010-07-07 05:09:39 +04:00
defflag COMPAT_LINUX32 : COMPAT_LINUX
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag COMPAT_OSF1
COMPAT_SUNOS* uses COMPAT_30 getfh too
2006-07-13 21:39:47 +04:00
defflag COMPAT_SUNOS: COMPAT_30
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_compat_svr4.h COMPAT_SVR4 COMPAT_SVR4_32 SVR4_COMPAT_SOLARIS2
After the recent time_t and associated changes, COMPAT_ULTRIX now depends on COMPAT_50. Make it so.
2009-01-18 16:25:39 +03:00
defflag COMPAT_ULTRIX: COMPAT_50
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag COMPAT_NETBSD32
After the recent mount changes, COMPAT_AOUT_M68K now depends on COMPAT_40.
2007-07-18 10:29:26 +04:00
defflag COMPAT_AOUT_M68K: COMPAT_40
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag COMPAT_M68K4K
defflag COMPAT_VAX1K
defflag COMPAT_43
Make COMPAT_xx imply all later COMPAT_yy. (COMPAT_09 implies all whereas COMPAT_14 just implies COMPAT_1[56]). This means COMPAT_xy implies NetBSD compatibility for NetBSD x.y OR LATER.
2003-09-22 21:26:14 +04:00
defflag opt_compat_netbsd.h COMPAT_NOMID
defopt NATM.
1998-07-06 02:48:05 +04:00
Define "machdep" attribute and mark files (in amd64 and x86).
2014-10-10 13:13:21 +04:00
define machdep
defflag opt_machdep.h MACHDEP
* Move config defns for the crypto algorithms into their own files. Define an attribute for each crypto algorithm, and use that attribute to select the files that implement the algorithm. * Give the "wlan" attribute a dependency on the "arc4" attribute. * Give the "cgd" pseudo-device the "des", "blowfish", "cast128", and "rijndael" attributes. * Use the new attribute-as-option-dependencies feature of config(8) to give the IPSEC_ESP option dependencies on the "des", "blowfish", "cast128", and "rijndael" attributes.
2002-10-11 05:52:04 +04:00
#
# Cryptography support. Include this early, since several things
# use it.
Clean up dependencies between opencrypto framework and sys/crypto, by making the sys/crypto transforms depend on (per-transform-config-keyword|opencrypto) Thanks to Martin Husemann for double-checking the changes.
2003-07-29 01:28:23 +04:00
# Individual crypto transforms
* Move config defns for the crypto algorithms into their own files. Define an attribute for each crypto algorithm, and use that attribute to select the files that implement the algorithm. * Give the "wlan" attribute a dependency on the "arc4" attribute. * Give the "cgd" pseudo-device the "des", "blowfish", "cast128", and "rijndael" attributes. * Use the new attribute-as-option-dependencies feature of config(8) to give the IPSEC_ESP option dependencies on the "des", "blowfish", "cast128", and "rijndael" attributes.
2002-10-11 05:52:04 +04:00
include "crypto/arc4/files.arc4"
include "crypto/des/files.des"
include "crypto/blowfish/files.blowfish"
include "crypto/cast128/files.cast128"
include "crypto/rijndael/files.rijndael"
Oops. I missed this file in my previous commit. Add inclusion of "files.skipjack" now that Skipjack has been moved from sys/opencrypto to crypto/skipjack.
2003-11-16 15:10:41 +03:00
include "crypto/skipjack/files.skipjack"
add "camellia" crypto code, copied from FreeBSD
2011-05-05 21:38:35 +04:00
include "crypto/camellia/files.camellia"
Make opencrypto explicitly depend on the "des" attribute. Also pull in zlib.c explicitly if opencrypto is included.
2003-08-24 23:19:54 +04:00
# General-purpose crypto processing framework.
include "opencrypto/files.opencrypto"
First step of random number subsystem rework described in <20111022023242.BA26F14A158@mail.netbsd.org>. This change includes the following: An initial cleanup and minor reorganization of the entropy pool code in sys/dev/rnd.c and sys/dev/rndpool.c. Several bugs are fixed. Some effort is made to accumulate entropy more quickly at boot time. A generic interface, "rndsink", is added, for stream generators to request that they be re-keyed with good quality entropy from the pool as soon as it is available. The arc4random()/arc4randbytes() implementation in libkern is adjusted to use the rndsink interface for rekeying, which helps address the problem of low-quality keys at boot time. An implementation of the FIPS 140-2 statistical tests for random number generator quality is provided (libkern/rngtest.c). This is based on Greg Rose's implementation from Qualcomm. A new random stream generator, nist_ctr_drbg, is provided. It is based on an implementation of the NIST SP800-90 CTR_DRBG by Henric Jungheim. This generator users AES in a modified counter mode to generate a backtracking-resistant random stream. An abstraction layer, "cprng", is provided for in-kernel consumers of randomness. The arc4random/arc4randbytes API is deprecated for in-kernel use. It is replaced by "cprng_strong". The current cprng_fast implementation wraps the existing arc4random implementation. The current cprng_strong implementation wraps the new CTR_DRBG implementation. Both interfaces are rekeyed from the entropy pool automatically at intervals justifiable from best current cryptographic practice. In some quick tests, cprng_fast() is about the same speed as the old arc4randbytes(), and cprng_strong() is about 20% faster than rnd_extract_data(). Performance is expected to improve. The AES code in src/crypto/rijndael is no longer an optional kernel component, as it is required by cprng_strong, which is not an optional kernel component. The entropy pool output is subjected to the rngtest tests at startup time; if it fails, the system will reboot. There is approximately a 3/10000 chance of a false positive from these tests. Entropy pool _input_ from hardware random numbers is subjected to the rngtest tests at attach time, as well as the FIPS continuous-output test, to detect bad or stuck hardware RNGs; if any are detected, they are detached, but the system continues to run. A problem with rndctl(8) is fixed -- datastructures with pointers in arrays are no longer passed to userspace (this was not a security problem, but rather a major issue for compat32). A new kernel will require a new rndctl. The sysctl kern.arandom() and kern.urandom() nodes are hooked up to the new generators, but the /dev/*random pseudodevices are not, yet. Manual pages for the new kernel interfaces are forthcoming.
2011-11-20 02:51:18 +04:00
# NIST SP800.90 CTR DRBG
include "crypto/nist_ctr_drbg/files.nist_ctr_drbg"
Merge tls-earlyentropy branch into HEAD.
2014-08-10 20:44:32 +04:00
# ChaCha-based fast PRNG
include "crypto/cprng_fast/files.cprng_fast"
move KERNHIST stuff much earlier, so drivers can depend upon it.
2011-05-23 10:50:17 +04:00
#
# Kernel history/tracing. Old UVMHIST depends upon this.
#
defflag opt_kernhist.h KERNHIST KERNHIST_PRINT
defparam KERNHIST_DELAY
2014-02-21 11:32:43 +04:00
defparam opt_kernhist.h KERNHIST_DELAY
move KERNHIST stuff much earlier, so drivers can depend upon it.
2011-05-23 10:50:17 +04:00
file kern/kern_history.c kernhist
Include sysmon earlier.
2003-07-21 09:35:49 +04:00
#
# System monitoring framework
#
include "dev/sysmon/files.sysmon"
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Oops, missed include in the last.
2002-10-11 02:12:53 +04:00
# Networking protocols
#
ipfilter depends on bpf_filter, not bpfilter (since the year 2000).
2010-01-24 17:25:57 +03:00
# Attribute used by various things that need BPF's virtual machine
#
define bpf_filter
defparam opt_bpf.h BPF_BUFSIZE
Set BPFJIT flag in opt_bpf.h which is included by bpf.c.
2015-01-04 10:32:32 +03:00
defflag opt_bpf.h BPFJIT
Add bpfjit and enable it for amd64.
2012-10-28 02:36:11 +04:00
file net/bpfjit.c sljit & bpfjit
Move 802.11-specific files to files.net80211
2005-11-28 00:14:26 +03:00
include "net80211/files.net80211"
Oops, missed include in the last.
2002-10-11 02:12:53 +04:00
include "netatalk/files.netatalk"
Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@, NetBSD Foundation Membership still pending.) This stack was written by Iain under sponsorship from Itronix Inc. The stack includes support for rfcomm networking (networking via your bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets. Drivers for both PCMCIA and USB bluetooth controllers are included.
2006-06-19 19:44:33 +04:00
include "netbt/files.netbt"
Move netinet, netinet6, ipsec, and ipfilter config defns to netinet/files.ipfilter, etinet/files.netinet, netinet6/files.netinet6, and netinet6/files.netipsec. XXX There are still a few stragglers in conf/files, which are entangled with other network protocols.
2002-10-11 02:45:45 +04:00
include "netinet/files.netinet"
include "netinet6/files.netinet6"
merge netipsec/key* into netkey/key*. no need for both. change confusing filename
2003-09-12 15:20:57 +04:00
include "netipsec/files.netipsec"
Fix build for MPLS import: add options MPLS, changed pseudo-device mpls to pseudo-device ifmpls
2010-06-26 19:17:56 +04:00
include "netmpls/files.netmpls"
Move netnatm config defns to netnatm/files.netnatm.
2002-10-11 02:58:49 +04:00
include "netnatm/files.netnatm"
need to include netsmb/files.netsmb
2003-02-18 15:20:19 +03:00
include "netsmb/files.netsmb"
Import NPF - a packet filter. Some features: - Designed to be fully MP-safe and highly efficient. - Tables/IP sets (hash or red-black tree) for high performance lookups. - Stateful filtering and Network Address Port Translation (NAPT). Framework for application level gateways (ALGs). - Packet inspection engine called n-code processor - inspired by BPF - supporting generic RISC-like and specific CISC-like instructions for common patterns (e.g. IPv4 address matching). See npf_ncode(9) manual. - Convenient userland utility npfctl(8) with npf.conf(8). NOTE: This is not yet a fully capable alternative to PF or IPFilter. Further work (support for binat/rdr, return-rst/return-icmp, common ALGs, state saving/restoring, logging, etc) is in progress. Thanks a lot to Matt Thomas for various useful comments and code review. Aye by: board@
2010-08-22 22:56:18 +04:00
include "net/npf/files.npf"
include "netinet/files.ipfilter"
PF from openbsd 3.5. missing features: - pfsync (due to protocol # assignment issues) - carp (not really a PF portion, but thought important to mention) - PF and ALTQ are mutually-exclusive. this will be sorted out when kjc@csl.sony.co.jp updates ALTQ and PF (and API inbetween) reviewed by matt, christos, perry torture-test is very welcomed.
2004-06-22 18:17:07 +04:00
include "net/files.pf"
Oops, missed include in the last.
2002-10-11 02:12:53 +04:00
Remove support for netns and netccitt. For now, don't include files.netns and files.netccitt.
2006-08-25 21:32:27 +04:00
obsolete defflag CCITT # obsolete
obsolete defflag HDLC # obsolete
obsolete defflag LLC # obsolete
obsolete defflag opt_ns.h NS NSIP # obsolete
obsolete defflag IPX # obsolete
Changes to MEMORY_RBFLAGS option: - renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the MEMORY_DISK options(4) - change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt the config(5) files accordingly - document this option inside options(4) See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html Reviewed by abs@ in private mail.
2009-02-06 21:50:26 +03:00
obsolete defparam opt_md.h MEMORY_RBFLAGS # superseded by
# MEMORY_DISK_RBFLAGS
Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC. Let brconfig tell whether the bridge is using the ipfilter hook, or not.
2003-02-27 22:22:36 +03:00
defflag opt_bridge_ipf.h BRIDGE_IPF # bridge(4) use inet_pfil_hooks
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_ppp.h PPP_DEFLATE PPP_BSDCOMP PPP_FILTER
# Include deflate or bsd
# compression, enable pppd
# packet filtering support
defflag PPPOE_SERVER and PPPOE_TERM_UNKNOWN_SESSIONS.
2006-08-05 21:20:54 +04:00
defflag opt_pppoe.h PPPOE_SERVER PPPOE_TERM_UNKNOWN_SESSIONS
defopt INET, NETATALK.
1998-07-05 04:51:04 +04:00
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
# networking options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag GATEWAY
defparam NMBCLUSTERS.
2005-12-21 13:57:22 +03:00
defparam opt_nmbclusters.h NMBCLUSTERS
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam SB_MAX
defopt SB_MAX, which controls the maximum allowable size of socket buffers
1999-02-09 05:15:45 +03:00
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
# file system options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
merge the bouyer-quota2 branch. This adds a new on-disk format to store disk quota usage and limits, integrated with ffs metadata. Usage is checked by fsck_ffs (no more quotacheck) and is covered by the WAPBL journal. Enabled with kernel option QUOTA2 (added where QUOTA was enabled in kernel config files), turned on with tunefs(8) on a per-filesystem basis. mount_mfs(8) can also turn quotas on. See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html for details.
2011-03-06 20:08:10 +03:00
defflag opt_quota.h QUOTA QUOTA2 # XXX files.ufs?
Add a new VNODE_LOCKDEBUG option, which enables checks in the VOP_*() calls to ensure that the vnode lock state is as expected when the VOP call is made. Modify vnode_if.src to set the expected state according to the documenting lock table for each VOP. Modify vnode_if.sh to emit the checks. Notes: - The checks are only performed if the vnode has the VLOCKSWORK bit set. Some file systems (e.g. specfs) don't even bother with vnode locks, so of course the checks will fail. - We can't actually run with VNODE_LOCKDEBUG because there are so many vnode locking problems, not the least of which is the "use SHARED for VOP_READ()" issue, which screws things up for the entire call chain. Inspired by similar changes in OpenBSD, but implemented differently.
2004-09-21 07:10:35 +04:00
defflag VNODE_LOCKDEBUG
convert "magiclinks" from a per-fs mount option to a system-wide sysctl. as discussed on tech-kern quite some time ago.
2006-02-12 04:32:06 +03:00
defflag MAGICLINKS
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
defopt BUFCACHE and BUFPAGES.
1999-02-27 09:39:34 +03:00
# buffer cache size options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam opt_bufcache.h BUFCACHE BUFPAGES
defopt BUFCACHE and BUFPAGES.
1999-02-27 09:39:34 +03:00
In-kernel device configuration manager - allows modification of device locators at run-time. Written by Mats O Jansson <moj@stacken.kth.se>. Reworked by Jun-ichiro itojun Hagino <itojun@netbsd.org>.
2001-07-01 06:56:20 +04:00
# userconf
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag USERCONF
In-kernel device configuration manager - allows modification of device locators at run-time. Written by Mats O Jansson <moj@stacken.kth.se>. Reworked by Jun-ichiro itojun Hagino <itojun@netbsd.org>.
2001-07-01 06:56:20 +04:00
Create opt_sysctl.h which will hold sysctl related options. I suspect most of these won't be used (well, the description related one will be), but it's good to formalize things.
2004-04-08 07:43:38 +04:00
# sysctl related
#
defflag opt_sysctl.h SYSCTL_DISALLOW_CREATE SYSCTL_DISALLOW_KWRITE
SYSCTL_DEBUG_SETUP SYSCTL_DEBUG_CREATE
s/SYSCTL_USE_DESCR/SYSCTL_INCLUDE_DESCR/g since the latter name seems more popular. Or at least, less unpopular.
2004-04-09 23:01:38 +04:00
SYSCTL_INCLUDE_DESCR
Create opt_sysctl.h which will hold sysctl related options. I suspect most of these won't be used (well, the description related one will be), but it's good to formalize things.
2004-04-08 07:43:38 +04:00
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- add kern_allocsys.c - move a comment around
1999-05-20 10:01:16 +04:00
# Not entirely MI, but present on multiple arch's
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- add kern_allocsys.c - move a comment around
1999-05-20 10:01:16 +04:00
defopt BUFCACHE and BUFPAGES.
1999-02-27 09:39:34 +03:00
# PC-style MBR handling
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_mbr.h COMPAT_386BSD_MBRPART
defopt COMPAT_386BSD_MBRPART into opt_mbr.h
1998-06-23 01:12:51 +04:00
Move DDB files to files.ddb XXX couple of kgdb references -- clean up later
2005-11-28 01:44:35 +03:00
#
defopt DDB.
1998-07-05 02:18:13 +04:00
# debugging options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move DDB files to files.ddb XXX couple of kgdb references -- clean up later
2005-11-28 01:44:35 +03:00
include "ddb/files.ddb" # in-kernel dynamic debugger
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_kgdb.h KGDB
Add KGDB_DEVPORT, for machines where KGDB_DEVADDR describes (for example) a dual uart and we need a port discriminator to decide where to attach kgdb.
2003-05-27 01:11:04 +04:00
defparam opt_kgdb.h KGDB_DEV KGDB_DEVNAME KGDB_DEVPORT
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
defflag LOCKDEBUG
defflag SYSCALL_DEBUG
add KSTACK_CHECK_MAGIC. discussed on tech-kern.
2002-07-03 00:27:44 +04:00
defflag opt_kstack.h KSTACK_CHECK_MAGIC
defopt DDB.
1998-07-05 02:18:13 +04:00
defopt MEMORY_DISK_{HOOKS,SERVER,IS_ROOT}.
1999-02-07 12:34:58 +03:00
# memory (ram) disk options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_md.h MEMORY_DISK_HOOKS MEMORY_DISK_IS_ROOT
MEMORY_DISK_DYNAMIC
Default MEMORY_DISK_SERVER to 1 instead of using 'undefined' to mean 1.
2007-07-15 12:40:22 +04:00
defparam opt_md.h MEMORY_DISK_SERVER=1 MEMORY_DISK_ROOT_SIZE
Changes to MEMORY_RBFLAGS option: - renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the MEMORY_DISK options(4) - change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt the config(5) files accordingly - document this option inside options(4) See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html Reviewed by abs@ in private mail.
2009-02-06 21:50:26 +03:00
MEMORY_DISK_RBFLAGS
Typo.
2015-08-30 10:35:11 +03:00
defparam opt_memory_disk_image.h makeoptions_MEMORY_DISK_IMAGE
defopt MINIROOTSIZE
1999-03-17 21:59:21 +03:00
Add the TFTPROOT kernel option for TFTP'ing root RAMdisk at root mount time. This allows working around situations where a kernel with embedded RAMdisk cannot be booted by the bootloader because the RAMdisk is too big.
2007-05-08 10:10:27 +04:00
defflag opt_tftproot.h TFTPROOT TFTPROOT_DEBUG
Implement pmc(9) -- An interface to hardware performance monitoring counters. These counters do not exist on all CPUs, but where they do exist, can be used for counting events such as dcache misses that would otherwise be difficult or impossible to instrument by code inspection or hardware simulation. pmc(9) is meant to be a general interface. Initially, the Intel XScale counters are the only ones supported.
2002-08-07 09:14:47 +04:00
# Support for hardware performance monitoring counters
#
defflag opt_perfctrs.h PERFCTRS
fix COMPAT dependency.
2009-01-11 18:55:55 +03:00
defflag opt_wlan.h WLAN
s/independant/independent/, from Zafer.
2006-11-25 01:04:21 +03:00
# Machine-independent device majors assignements
move MI majors config file from sys/dev/majors to sys/conf/majors
2003-10-11 01:26:38 +04:00
include "conf/majors"
Add some framework for MI assignment of device majors - add sys/dev/majors which is automatically included during kernel config, and add comments to individual machine-dependant majors.* files to assign new MI majors in MI file. Range 0-191 is reserved for machine-specific assignments, range 192+ are MI assignments. Follows recent discussion on tech-kern@
2003-10-05 12:04:24 +04:00
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# generic attributes
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add video(4)
2008-09-06 23:18:16 +04:00
define videobus { }
Following Matt Thomas's request, rename ata attribute to ata_hl, and wdc_base to ata. We can now have atabus* at ata? in kernel config files.
2003-10-09 00:57:59 +04:00
define ata {[channel = -1]}
Add common routines for SATA controllers. Right now, we have sata_speed(), which reports the speed encoded in the SStatus register.
2004-05-29 03:26:27 +04:00
define sata
ahcisata(4) and siisata(4) use similar SATA FIS functions, share them.
2009-06-17 07:07:51 +04:00
define sata_fis
Apply back changes that were reverted on Jul 24 and Jul 26 (general ata/wdc cleanup and SATA PMP support), now that I'm back to fix the fallouts.
2012-07-31 19:50:31 +04:00
define sata_pmp
Define a "scsi_core" attribute. Make the "scsi" attribute depend on "scsi_core". Make all the files previously selected by the "scsi" attribute selected by the "scsi_core" attribute. Give the "scsibus" device the "scsi_core" attribute.
2002-10-10 00:23:56 +04:00
define scsi_core
define scsi {[channel = -1]}: scsi_core
Following Matt Thomas's request, rename ata attribute to ata_hl, and wdc_base to ata. We can now have atabus* at ata? in kernel config files.
2003-10-09 00:57:59 +04:00
define ata_hl {[drive = -1]}
Make the ATA mid-layer appears as atabus, as proposed in http://mail-index.netbsd.org/tech-kern/2003/09/25/0006.html This adds a device (atabus) between IDE controllers and wd or atapibus, to have each ATA channel show up in the device tree. Later there will be atabus devices in /dev, so that we can do IOCTL on them. Each atabus has its own kernel thread, to handle operations that needs polling, e.g. reset and others. Device probing on each bus it defered to the atabus thread creation. This allows to do the reset and basic device probes in parallel, which reduce boot time on systems with several pciide controllers.
2003-10-08 14:58:12 +04:00
define atapi { }
"attach radio at radio": using one word as both attribute and device doesn't work well, radio.c is pulled in even with no such device in the configuration, and the kernel doesn't link due to missing "radio_cd". So call the attribute "radiodev" to avoid confusion.
2002-01-07 20:44:42 +03:00
define radiodev { }
Add gpibdev attribute
2003-06-02 08:12:07 +04:00
define gpibdev {[address = -1]}
Add gpio files and majors.
2005-09-27 06:41:10 +04:00
define gpiobus { }
Dallas Semiconductor 1-Wire bus support, from OpenBSD. Currently includes gpioow(4), attaching a bit-banging driver via a GPIO pin. Also, owtemp(4) which supports some of the 1-Wire temperature sensors, including the DS18b20 and DS1920 - temperatures are returned via the envsys(4) framework. Original drivers by Alexander Yurchenko (grange@openbsd), with envsys(4) support and a fix to the 1-wire search algorithm (for discovering devices on the bus) by me. As discussed on tech-kern earlier this week.
2006-04-07 22:55:21 +04:00
define onewirebus { }
Add pckbport attribute, and apply it to pckbc. Somehow I missed this file in the main commit of pckbport. *blush*
2004-03-14 01:45:23 +03:00
define pckbport {[slot = -1]}
define pckbport_machdep_cnattach
Conditionalize firmload.c on the firmload attribute.
2006-01-17 09:52:43 +03:00
define firmload
Some changes from Matt Thomas, to help support FDDI: add 'fddi' attribute, and files descriptions for it. XXX add 'pdq' attribute, and add files descriptions for it. This is to XXX support the various front-ends that use his driver (which will eventually XXX live on PCI, EISA, and TC busses at least). This is probably not the best XXX way to arrange this, but i can't think of a better way without whacking XXX a lot of things.
1995-08-19 04:49:15 +04:00
Move audio related definitions.
2014-10-10 16:29:28 +04:00
include "dev/files.audio"
Simple code to provide a console bell through a generic audio device, for systems that don't have a dedicated feeper. It's up to MD code to enable this by having the "audiobell" attribute and calling audiobell() at the appropriate moment. Code for making noise in the kernel from Richard Earnshaw. Simple synthesizer design from the RISC OS Programmer's Reference manual.
2004-01-17 23:55:59 +03:00
Split hdaudio and PCI attach glue. Even though the driver was written with this separation in mind, all of the code lived in sys/dev/pci/hdaudio. Move common parts to sys/dev/hdaudio and PCI attach glue to sys/dev/pci.
2015-03-28 17:09:58 +03:00
# High definition audio
include "dev/hdaudio/files.hdaudio"
add the common code for verbose printing of devices.
2014-09-21 18:31:38 +04:00
# Base verbose vendor/product printing support
file dev/dev_verbose.c
Add video(4)
2008-09-06 23:18:16 +04:00
# video devices, attaches to video hardware driver
#
device video
attach video at videobus
modify the dtv device api so hardware drivers can be loaded independently of the dtv module
2011-08-09 05:42:24 +04:00
# DTV subsystem
#
include "dev/dtv/files.dtv"
Add an API for HDMI CEC devices. HDMI Consumer Electronics Control (CEC) is a protocol that provides high-level control functions between CEC-capable connected devices.
2015-08-02 00:19:24 +03:00
# HDMI CEC
#
include "dev/hdmicec/files.hdmicec"
Add an i2c attachment for the LM78 family of temp sensor/fan control Tested by Martin Husemann
2008-10-12 17:17:28 +04:00
# National Semiconductor LM7[89]
#
# (included here so files.i2c can define an attachment)
device lm: sysmon_envsys
file dev/ic/nslm7x.c lm needs-flag
Split spdmem driver into a bus attachment and a common back-end probe and ROM decode, to follow similar changes made in OpenBSD: http://article.gmane.org/gmane.os.openbsd.cvs/94948 http://article.gmane.org/gmane.os.openbsd.cvs/94956 There exists at least one alternative attachment (for SGI IP35 systems; see http://article.gmane.org/gmane.os.openbsd.cvs/94947), and there could be more in the future. Thanks to Christoph Egger for pointing out the OpenBSD activity.
2010-03-24 03:31:41 +03:00
# JEDEC standard SPD EPROM
#
# (included here so files.i2c can define an attachment)
device spdmem
file dev/ic/spdmem.c spdmem
New generic I2C framework. Supports bit-bang and "intelligent" I2C interface controllers (of varying intelligence levels). Contributed by Wasabi Systems, Inc. Primarily written by Steve Woodford, with some modification by me.
2003-09-30 04:35:30 +04:00
# I2C device support
include "dev/i2c/files.i2c"
Go ahead and include files.spi. It is going to be used by my alchemy commit and it appears to be harmless to other configs. This is modeled much like files.i2c.
2006-10-02 11:57:46 +04:00
# SPI device support
include "dev/spi/files.spi"
Move IR and Bluetooth config defns to their own files.
2002-10-11 01:52:28 +04:00
# IR device support
include "dev/ir/files.ir"
Add irbus (IrDA) and cir (Consumer Ir) and related file directives.
2001-12-02 13:41:52 +03:00
cleanup old lpt(4) attachment, and glue ppbus in so that they can coexist: * lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c is included there too; dev/ic/lpt.c is not included if ppbus is configured or if there is alternative platform lpt (like for pc532) * g/c MD lpt definitions and custom puc/upc attachments, glue moved to conf/files and dev/pci/files.pci respectively; remove device lpt definition from dev/isa/files.isa * add ppbus parport attribute, atppc device attachments, adjust plip and lpt glue
2004-01-20 22:58:00 +03:00
# Parallel Port Bus support
include "dev/ppbus/files.ppbus"
Put the rasops attributes in conf/files so that everyone can run config(8) without pulling in files.rasops. There is prior art for this, e.g. audio.
2000-04-20 22:23:37 +04:00
# raster operations attributes
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
define rasops1
define rasops2
define rasops4
define rasops8
define rasops15
define rasops16
define rasops24
define rasops32
Updates to allow Zaurus screen to rotate 90 degrees to a usable state with the keyboard. Patch from peter@ copied from OpenBSD. Feedback and OK from matt@
2007-02-02 05:10:24 +03:00
define rasops_rotation
Put the rasops attributes in conf/files so that everyone can run config(8) without pulling in files.rasops. There is prior art for this, e.g. audio.
2000-04-20 22:23:37 +04:00
add a public domain image decoder
2011-02-07 02:13:04 +03:00
# image decoding support
include "dev/stbi/files.stbi"
splash is MI; move it out of files.i386
2006-02-19 20:24:36 +03:00
# splash screen support
include "dev/splash/files.splash"
Add common videomode include. As requested by macallan@.
2006-04-07 05:39:13 +04:00
# videomode support
include "dev/videomode/files.videomode"
Some changes from Matt Thomas, to help support FDDI: add 'fddi' attribute, and files descriptions for it. XXX add 'pdq' attribute, and add files descriptions for it. This is to XXX support the various front-ends that use his driver (which will eventually XXX live on PCI, EISA, and TC busses at least). This is probably not the best XXX way to arrange this, but i can't think of a better way without whacking XXX a lot of things.
1995-08-19 04:49:15 +04:00
# net device attributes - we have generic code for arc(net), ether(net),
Add MI Econet support. This is lacking any interfaces to higher-layer protocols, and lacking any timeouts, but it basically works, doing four-way handshakes in both directions and incoming Machine Peek operations. Oh, and Econet is Acorn's ancient, proprietary 500kbit/s networking technology.
2001-09-11 03:11:05 +04:00
# fddi, token ring, atm and eco(net).
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename 'arc' into 'arcnet' to avoid conflict with sys/arch/arc/conf/files.arc's machine statement.
2007-11-14 02:22:06 +03:00
define arcnet
add atm networking stuff
1996-06-22 05:49:00 +04:00
define atm
Add MI Econet support. This is lacking any interfaces to higher-layer protocols, and lacking any timeouts, but it basically works, doing four-way handshakes in both directions and incoming Machine Peek operations. Oh, and Econet is Acorn's ancient, proprietary 500kbit/s networking technology.
2001-09-11 03:11:05 +04:00
define eco
Some changes from Matt Thomas, to help support FDDI: add 'fddi' attribute, and files descriptions for it. XXX add 'pdq' attribute, and add files descriptions for it. This is to XXX support the various front-ends that use his driver (which will eventually XXX live on PCI, EISA, and TC busses at least). This is probably not the best XXX way to arrange this, but i can't think of a better way without whacking XXX a lot of things.
1995-08-19 04:49:15 +04:00
define ether
define fddi
Driver for Essential Communications' RoadRunner HIPPI (800 Mb/sec network) card. With some modification, this could probably also work for their Gigabit Ethernet card based on the same chipset...
1998-05-14 04:04:57 +04:00
define hippi
First Prototype implementation of network interface part for IEEE1394 (if_fw). Current status: Only OHCI chip is supported (fwohci). ping (IPv4) works with Sony's implementation (SmartConnect) on Win98. sometimes works but not stable. Not implemented yet: IRM (Isochronous Resource Manager) functionality. Link layer fragmentation. Topology map. More to do: clean ups MCAP charactor device part dhcp There is no entry in GENERIC config file yet. Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
2000-11-05 20:17:12 +03:00
define ieee1394
config(8) glue for Token-Ring and TROPIC drivers.
1999-03-23 01:33:35 +03:00
define token
port FreeBSD's serial ppp layer to NetBSD. The PPP part seems broken still, but the lmc driver uses the HDLC bits from here anyway.
1999-03-25 06:39:11 +03:00
define sppp
First step of random number subsystem rework described in <20111022023242.BA26F14A158@mail.netbsd.org>. This change includes the following: An initial cleanup and minor reorganization of the entropy pool code in sys/dev/rnd.c and sys/dev/rndpool.c. Several bugs are fixed. Some effort is made to accumulate entropy more quickly at boot time. A generic interface, "rndsink", is added, for stream generators to request that they be re-keyed with good quality entropy from the pool as soon as it is available. The arc4random()/arc4randbytes() implementation in libkern is adjusted to use the rndsink interface for rekeying, which helps address the problem of low-quality keys at boot time. An implementation of the FIPS 140-2 statistical tests for random number generator quality is provided (libkern/rngtest.c). This is based on Greg Rose's implementation from Qualcomm. A new random stream generator, nist_ctr_drbg, is provided. It is based on an implementation of the NIST SP800-90 CTR_DRBG by Henric Jungheim. This generator users AES in a modified counter mode to generate a backtracking-resistant random stream. An abstraction layer, "cprng", is provided for in-kernel consumers of randomness. The arc4random/arc4randbytes API is deprecated for in-kernel use. It is replaced by "cprng_strong". The current cprng_fast implementation wraps the existing arc4random implementation. The current cprng_strong implementation wraps the new CTR_DRBG implementation. Both interfaces are rekeyed from the entropy pool automatically at intervals justifiable from best current cryptographic practice. In some quick tests, cprng_fast() is about the same speed as the old arc4randbytes(), and cprng_strong() is about 20% faster than rnd_extract_data(). Performance is expected to improve. The AES code in src/crypto/rijndael is no longer an optional kernel component, as it is required by cprng_strong, which is not an optional kernel component. The entropy pool output is subjected to the rngtest tests at startup time; if it fails, the system will reboot. There is approximately a 3/10000 chance of a false positive from these tests. Entropy pool _input_ from hardware random numbers is subjected to the rngtest tests at attach time, as well as the FIPS continuous-output test, to detect bad or stuck hardware RNGs; if any are detected, they are detached, but the system continues to run. A problem with rndctl(8) is fixed -- datastructures with pointers in arrays are no longer passed to userspace (this was not a security problem, but rather a major issue for compat32). A new kernel will require a new rndctl. The sysctl kern.arandom() and kern.urandom() nodes are hooked up to the new generators, but the /dev/*random pseudodevices are not, yet. Manual pages for the new kernel interfaces are forthcoming.
2011-11-20 02:51:18 +04:00
define wlan
IPv6 kernel code, based on KAME/NetBSD 1.4, SNAP kit 19990628. (Sorry for a big commit, I can't separate this into several pieces...) Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details. - sys/kern: do not assume single mbuf, accept chained mbuf on passing data from userland to kernel (or other way round). - "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ package (ftp://ftp.csl.sony.co.jp/pub/kjc/). - sys/netinet/tcp*: IPv4/v6 dual stack tcp support. - sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those file to be there so we patch it up. - sys/netinet: IPsec additions are here and there. - sys/netinet6/*: most of IPv6 code sits here. - sys/netkey: IPsec key management code - dev/pci/pcidevs: regen In my understanding no code here is subject to export control so it should be safe.
1999-07-01 12:12:45 +04:00
define crypto
Define the ncr5380sbc attribute and compile dev/ic/ncr5380sbc.c if it's used.
1996-01-02 01:27:08 +03:00
add a tpm driver from bsssd.sourceforge.net
2012-01-22 10:44:28 +04:00
# TPM
device tpm
file dev/ic/tpm.c tpm needs-flag
New ARP system, supports IPv4 over any hardware link. Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will only support Ethernet. Tcpdump itself should be ok, but libpcap needs lot of work. For the detailed change history, look at the commit log entries for the is-newarp branch.
1997-03-15 21:09:08 +03:00
# devices ARPing IPv4 pull this in:
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
New ARP system, supports IPv4 over any hardware link. Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will only support Ethernet. Tcpdump itself should be ok, but libpcap needs lot of work. For the detailed change history, look at the commit log entries for the is-newarp branch.
1997-03-15 21:09:08 +03:00
define arp
Move ALTQ configuration definitions into altq/files.altq
2002-04-17 01:27:13 +04:00
#
# ALTQ network traffic shaping subsystem
#
include "altq/files.altq"
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move IPKDB config defns to ipkdb/files.ipkdb.
2002-10-11 01:56:50 +04:00
# IPKDB kernel debugger
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move IPKDB config defns to ipkdb/files.ipkdb.
2002-10-11 01:56:50 +04:00
include "ipkdb/files.ipkdb"
Rename recently checked in KGDB to IPKDB to resolve conflicts with older KGDB
1996-10-16 23:32:08 +04:00
lsu -> ld, by popular request.
2000-11-26 20:44:02 +03:00
# Logical disk
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
lsu -> ld, by popular request.
2000-11-26 20:44:02 +03:00
device ld: disk
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ld.c ld needs-flag
ca -> lsu
2000-10-19 18:26:41 +04:00
* Move the mii_bitbang attribute into dev/mii/files.mii * Pull in dev/mii/files.mii from conf/files, rather than playing the magic "files include order" dance in N machine-dependent configuration definitions.
2002-04-17 00:50:16 +04:00
#
# MII/PHY support for network devices
#
include "dev/mii/files.mii"
Centralize the RAIDframe config definitions.
2002-04-17 00:33:00 +04:00
#
# RAIDframe
#
include "dev/raidframe/files.raidframe"
Add dmover(9) glue.
2002-08-02 04:32:12 +04:00
#
# Hardware-assisted data mover API
#
include "dev/dmover/files.dmover"
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Break up the ep driver into isa, eisa, and pci front-ends and a bus-independent core driver. Tested on all three bus types, including an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in your kernel config file to catch this one). XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 06:15:42 +04:00
# "Chipset" drivers. These are the bus-independent routines which
# contain the cfdrivers. Attachments are provided by files.<bus>
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Break up the ep driver into isa, eisa, and pci front-ends and a bus-independent core driver. Tested on all three bus types, including an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in your kernel config file to catch this one). XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 06:15:42 +04:00
From Enami Tsugutomo: Busify and split the aic6360 driver.
1997-10-06 23:49:17 +04:00
# Adaptec AIC-6[32]60 ICs
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device aic: scsi
From Enami Tsugutomo: Busify and split the aic6360 driver.
1997-10-06 23:49:17 +04:00
file dev/ic/aic6360.c aic
Fix an oversight in the AIC-7xxx SEEPROM split.
2000-01-26 09:27:32 +03:00
# SMC 93Cx6 Serial EEPROM devices
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Fix an oversight in the AIC-7xxx SEEPROM split.
2000-01-26 09:27:32 +03:00
define smc93cx6
file dev/ic/smc93cx6.c smc93cx6
Slight adjustments for new version of ahc driver.
1996-05-16 08:00:58 +04:00
# Adaptec 2[789]4X, 394X, aic7770 and aic78[5678]0 SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam opt_ahc.h AHC_DEBUG
defflag opt_ahc.h AHC_NO_TAGS
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device ahc: scsi
Split the code that reads the SEEPROM into its own file.
2000-01-26 09:04:37 +03:00
define ahc_seeprom
Add new files for common VL/EISA ahc code.
2000-03-15 05:10:09 +03:00
define ahc_aic77xx
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/aic7xxx.c ahc
Changes for newer ahc driver, and ahd driver (the latter is a placeholder until it's actually added, soon).
2003-04-19 23:29:10 +04:00
file dev/ic/aic7xxx_osm.c ahc
Split the code that reads the SEEPROM into its own file.
2000-01-26 09:04:37 +03:00
file dev/ic/aic7xxx_seeprom.c ahc_seeprom
Add new files for common VL/EISA ahc code.
2000-03-15 05:10:09 +03:00
file dev/ic/aic77xx.c ahc_aic77xx
Slight adjustments for new version of ahc driver.
1996-05-16 08:00:58 +04:00
Changes for newer ahc driver, and ahd driver (the latter is a placeholder until it's actually added, soon).
2003-04-19 23:29:10 +04:00
# Adaptec aic79xx SCSI controllers
defflag opt_ahd.h AHD_DEBUG
device ahd: scsi
file dev/ic/aic79xx.c ahd
file dev/ic/aic79xx_osm.c ahd
Add glue for 'dpt' driver.
1999-09-28 03:44:27 +04:00
# DPT EATA SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add glue for 'dpt' driver.
1999-09-28 03:44:27 +04:00
device dpt: scsi
file dev/ic/dpt.c dpt
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 17:52:22 +03:00
# Compaq Smart ARRAY controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 17:52:22 +03:00
device cac {unit = -1}
file dev/ic/cac.c cac
lsu -> ld, by popular request.
2000-11-26 20:44:02 +03:00
attach ld at cac with ld_cac
file dev/ic/ld_cac.c ld_cac
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 17:52:22 +03:00
Commit forgotten definition of the ciss driver.
2006-03-22 01:33:07 +03:00
# HP/Compaq Command Interface for SCSI-3 Support
#
device ciss: scsi
file dev/ic/ciss.c ciss
Add a driver for the Mylex DAC960 family (including DEC SWXCR).
2001-02-04 20:05:11 +03:00
# Mylex DAC960 RAID controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add a driver for the Mylex DAC960 family (including DEC SWXCR).
2001-02-04 20:05:11 +03:00
device mlx {unit = -1}
file dev/ic/mlx.c mlx needs-flag
attach ld at mlx with ld_mlx
file dev/ic/ld_mlx.c ld_mlx
Add a driver for ICP-Vortex GDT and Intel Storage RAID controllers. Parts taken from OpenBSD. Test hardware kindly provided by Intel. This still needs management bits, and doesn't support older controllers, but that shouldn't be hard to fix.
2002-04-23 01:05:19 +04:00
# ICP-Vortex/Intel RAID controllers
#
device icp {unit = -1}
file dev/ic/icp.c icp needs-flag
Add support for the user-generated command interface and event logging required by the ICP-Vortex management tools. Many thanks to Achim Leubner at ICP-Vortex for a few bug fixes and for testing.
2003-05-13 19:42:33 +04:00
file dev/ic/icp_ioctl.c icp
Add a driver for ICP-Vortex GDT and Intel Storage RAID controllers. Parts taken from OpenBSD. Test hardware kindly provided by Intel. This still needs management bits, and doesn't support older controllers, but that shouldn't be hard to fix.
2002-04-23 01:05:19 +04:00
attach ld at icp with ld_icp
file dev/ic/ld_icp.c ld_icp
device icpsp: scsi
file dev/ic/icpsp.c icpsp
attach icpsp at icp
Add a driver for Adaptec FSA RAID controllers, as often found in Dell servers. Based on the FreeBSD/OpenBSD versions.
2002-04-26 06:05:07 +04:00
# Adaptec FSA RAID controllers
#
device aac {unit = -1}
file dev/ic/aac.c aac
attach ld at aac with ld_aac
file dev/ic/ld_aac.c ld_aac
Add AdvanSys support
1998-08-26 18:20:37 +04:00
# AdvanSys 1200A, 1200B and ULTRA SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add AdvanSys support
1998-08-26 18:20:37 +04:00
device adv: scsi
file dev/ic/adv.c adv
advlib.c and advmcode.c should be built for all adv, not just adv_pci. From takashi.yamamoto@bigfoot.com, kern/12341.
2001-03-08 07:18:17 +03:00
file dev/ic/advlib.c adv
file dev/ic/advmcode.c adv
Add AdvanSys support
1998-08-26 18:20:37 +04:00
Add AdvanSys ULTRA WIDE SCSI controllers
1998-09-26 20:28:16 +04:00
# AdvanSys ULTRA WIDE SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add AdvanSys ULTRA WIDE SCSI controllers
1998-09-26 20:28:16 +04:00
device adw: scsi
file dev/ic/adw.c adw
Add generic bha and uha code.
1996-09-01 00:27:55 +04:00
# BusLogic MultiMaster and MultiMaster Ultra SCSI controllers
Reorder device declarations of bha and aha so th BusLogic driver probes before before the Adaptec 1542/1642 driver. As commented, Probing AHA first configures bhas as aha, via their AHA hardware-compatibility mode.
1997-07-29 02:48:59 +04:00
# (Must be declared before AHA to ensure bha probes before aha.
# Probing AHA first configures bhas as aha, via their AHA
# hardware-compatibility mode.)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device bha: scsi
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/bha.c bha
Add generic bha and uha code.
1996-09-01 00:27:55 +04:00
Reorder device declarations of bha and aha so th BusLogic driver probes before before the Adaptec 1542/1642 driver. As commented, Probing AHA first configures bhas as aha, via their AHA hardware-compatibility mode.
1997-07-29 02:48:59 +04:00
# Adaptec AHA-154x and AHA-164x controllers
# (must be after bha, see above)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device aha: scsi
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/aha.c aha
Reorder device declarations of bha and aha so th BusLogic driver probes before before the Adaptec 1542/1642 driver. As commented, Probing AHA first configures bhas as aha, via their AHA hardware-compatibility mode.
1997-07-29 02:48:59 +04:00
Add a driver for the Initio INIC-940/950 PCI SCSI controllers. Based on OpenBSD's iha driver, and modified some structures by me. Tested on arc, i386 and macppc.
2001-06-03 17:43:45 +04:00
# Initio INIC-940/950 SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add a driver for the Initio INIC-940/950 PCI SCSI controllers. Based on OpenBSD's iha driver, and modified some structures by me. Tested on arc, i386 and macppc.
2001-06-03 17:43:45 +04:00
device iha: scsi
file dev/ic/iha.c iha
add an entry for 'isp', the MI Qlogic ISP 10x0 SCSI Controller driver, from Matt Jacob.
1997-03-12 04:56:18 +03:00
# Qlogic ISP 10x0 SCSI Controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_isp.h ISP_DISABLE_1020_SUPPORT
ISP_DISABLE_1080_SUPPORT
ISP_DISABLE_2100_SUPPORT
ISP_DISABLE_2200_SUPPORT
Major update to isp(4) driver to bring it in line with external sources. The major changes are: + 4Gb (24XX) card support + Rewritten fabric and loop evaluation code + New f/w sets The 4Gb changes required major rototilling, which caused a rewrite of fabric and loop eval code. The latter can now be set up to tune for dynamic device arrival/departure if the framework is set up for it, or to be firm about waiting for devices. Testing has been principally on amd64, i386 and sparc64 and seems to not have broken things for me.
2007-05-25 01:30:41 +04:00
ISP_DISABLE_2300_SUPPORT
Make some changes to isp(4) options: add a disable for 2322 suppport; remove the option for firmware crash dumps; add a ISP_VPORTS option for virtual ports (24XX, coming soon).
2008-03-11 08:24:38 +03:00
ISP_DISABLE_2322_SUPPORT
Major update to isp(4) driver to bring it in line with external sources. The major changes are: + 4Gb (24XX) card support + Rewritten fabric and loop evaluation code + New f/w sets The 4Gb changes required major rototilling, which caused a rewrite of fabric and loop eval code. The latter can now be set up to tune for dynamic device arrival/departure if the framework is set up for it, or to be firm about waiting for devices. Testing has been principally on amd64, i386 and sparc64 and seems to not have broken things for me.
2007-05-25 01:30:41 +04:00
ISP_DISABLE_2400_SUPPORT
ISP_DISABLE_FW
ISP_TARGET_MODE
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam opt_isp.h ISP_LOGDEFAULT
Make some changes to isp(4) options: add a disable for 2322 suppport; remove the option for firmware crash dumps; add a ISP_VPORTS option for virtual ports (24XX, coming soon).
2008-03-11 08:24:38 +03:00
ISP_VPORTS
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device isp: scsi
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/isp.c isp
Major update to isp(4) driver to bring it in line with external sources. The major changes are: + 4Gb (24XX) card support + Rewritten fabric and loop evaluation code + New f/w sets The 4Gb changes required major rototilling, which caused a rewrite of fabric and loop eval code. The latter can now be set up to tune for dynamic device arrival/departure if the framework is set up for it, or to be firm about waiting for devices. Testing has been principally on amd64, i386 and sparc64 and seems to not have broken things for me.
2007-05-25 01:30:41 +04:00
file dev/ic/isp_library.c isp
New file for building isp host adapter.
1998-07-16 00:22:19 +04:00
file dev/ic/isp_netbsd.c isp
don't compile isp_target.c if ISP_TARGET_MODE is not required
2005-02-01 19:00:50 +03:00
file dev/ic/isp_target.c isp & isp_target_mode
Add mfi(4), a driver for LSI Logic & Dell MegaRAID SAS RAID controller. Ported from OpenBSD, tested on i386 and amd64.
2006-12-18 01:57:14 +03:00
# LSILogic MegaRAID SAS
#
device mfi: scsi
file dev/ic/mfi.c mfi
Add lfmiop (LSILogic Fusion-MPT I/O Processor) placeholders for driver to added latter.
2002-05-18 11:23:04 +04:00
# LSILogic Fusion-MPT I/O Processor SCSI/FC Controllers
#
Device driver for the LSI Logic Fusion-MPT based SCSI and Fibre Channel adapters. Currently supports: * LSI 53c1030 Ultra320 SCSI * LSI FC909, FC909A, FC919, and FC929 Fibre Channel Ported from the FreeBSD "mpt" driver, written by Greg Ansley. Thanks to Frank van der Linden for testing and some bug finding. This work was sponsored by Wasabi Systems, Inc.
2003-04-17 02:02:59 +04:00
device mpt: scsi
file dev/ic/mpt.c mpt
file dev/ic/mpt_debug.c mpt
file dev/ic/mpt_netbsd.c mpt
Add MI NCR/Symbios 53c700 SCSI driver. This "oosiop" driver was originally written by Shuichiro URATA for arc port, and then it was modified by me to make it work also on hp700. This driver has been tested on my NEC Express5800/240 with 53c700-66 for several months, and also tested on HP9000 735/125 with 53c700 (though current hp700 port has been broken since SA merge). Both sync transfer and disconnect/reselect work fine, but tagged queuing is not implemented yet.
2003-04-06 13:48:41 +04:00
Workbit NinjaSCSI-32 PCI/CardBus SCSI driver (njs)
2004-08-26 18:13:46 +04:00
# Workbit NinjaSCSI-32 controllers
device njs: scsi
file dev/ic/ninjascsi32.c njs
Add MI NCR/Symbios 53c700 SCSI driver. This "oosiop" driver was originally written by Shuichiro URATA for arc port, and then it was modified by me to make it work also on hp700. This driver has been tested on my NEC Express5800/240 with 53c700-66 for several months, and also tested on HP9000 735/125 with 53c700 (though current hp700 port has been broken since SA merge). Both sync transfer and disconnect/reselect work fine, but tagged queuing is not implemented yet.
2003-04-06 13:48:41 +04:00
# Symbios/NCR 53c700 SCSI controllers
device oosiop: scsi
file dev/ic/oosiop.c oosiop
Add lfmiop (LSILogic Fusion-MPT I/O Processor) placeholders for driver to added latter.
2002-05-18 11:23:04 +04:00
Add a MI driver for the Symbios/NCR 53c710 SCSI controller. This is based on amiga's siop driver, but converted to use bus_space(9) functions and modified to fit bus_dma(9) framework. Currently tested on NetBSD/arc with jazzio 53c710 SCSI, which really requires bus_dma(9) functions :-) Sync transfers and disconnect/reconnect are also working. TODO: - Test under more heavy load - Clean up osiop_checkintr() hander - Reorganize command queue and sync negotiation handling more suitable for thorpej-scsipi mid-layer - Re-think defered interrupt handling for amiga
2001-04-30 08:47:50 +04:00
# Symbios/NCR 53c710 SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add a MI driver for the Symbios/NCR 53c710 SCSI controller. This is based on amiga's siop driver, but converted to use bus_space(9) functions and modified to fit bus_dma(9) framework. Currently tested on NetBSD/arc with jazzio 53c710 SCSI, which really requires bus_dma(9) functions :-) Sync transfers and disconnect/reconnect are also working. TODO: - Test under more heavy load - Clean up osiop_checkintr() hander - Reorganize command queue and sync negotiation handling more suitable for thorpej-scsipi mid-layer - Re-think defered interrupt handling for amiga
2001-04-30 08:47:50 +04:00
device osiop: scsi
file dev/ic/osiop.c osiop
Update for siop split.
2000-05-15 12:27:24 +04:00
# common stuff for siop and esiop
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
define siop_common
file dev/ic/siop_common.c siop_common
Update for siop split.
2000-05-15 12:27:24 +04:00
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller (the name 'siop' is still being discussed, may change). Only basic disconnect/reselect for now, no sync/wide negotiation. Tested with 810A, 875 and 895 on i386 only. The bus-independant part should also be able to handle the 53c720 and 53c770. A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 21:56:58 +04:00
# Symbios/NCR 53c720/53c8xx SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
device siop: scsi,siop_common
Add support for NCR 53C720 found on various machines/attachments. From OpenBSD (Mark Kettenis)
2008-03-30 16:32:13 +04:00
file dev/ic/siop.c siop & (siop_pci | siop_gedoens)
defflag SIOP_SYMLED.
2002-04-18 16:04:05 +04:00
defflag opt_siop.h SIOP_SYMLED
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller (the name 'siop' is still being discussed, may change). Only basic disconnect/reselect for now, no sync/wide negotiation. Tested with 810A, 875 and 895 on i386 only. The bus-independant part should also be able to handle the 53c720 and 53c770. A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 21:56:58 +04:00
First cut at a esiop driver (enhanced siop). Doesn't implement tagged queuing yet. If is restricted to SIOP which implement the load/store instruction, and has 10 scratch registers (basically, 825 and newer, possibly 770). It implements a different interface between host and script, using a real ring for command starts, and improved support for reconnect which will allow 256 tag per device. It uses interrupt on the fly to signal complete command, which allows several commands to be serviced per interrupt and doesn't require the script to stop to signal command completion.
2002-04-22 02:52:05 +04:00
device esiop: scsi,siop_common
file dev/ic/esiop.c esiop
Add generic bha and uha code.
1996-09-01 00:27:55 +04:00
# UltraStor SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device uha: scsi
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/uha.c uha
Add generic bha and uha code.
1996-09-01 00:27:55 +04:00
Move the elink probe code from files.isa to the common conf/files so that MCA without isa can compile. fix by cube.
2007-12-14 00:23:48 +03:00
# 3Com common probe code
define elink
file dev/isa/elink.c elink
Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD. This is very adhoc work for IETF meeting. - Since it seems that 'an' and 'wi' have similar hardware, low level functions should be shared. - There are PCI/ISA cards of Aironet but not supported yet. - The wiconfig interface is changed so that wiconfig cannot be used. - 'ancontrol' of FreeBSD is not ported. - Only infrastructure mode is tested. - WEP is not supported. Though I only have an Aironet card, Cisco card should be expected to work.
2000-12-12 02:16:50 +03:00
# Aironet PC4500/PC4800
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
an(4) needs wlan support
2004-02-03 22:46:18 +03:00
device an: arp, wlan, ifnet
Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD. This is very adhoc work for IETF meeting. - Since it seems that 'an' and 'wi' have similar hardware, low level functions should be shared. - There are PCI/ISA cards of Aironet but not supported yet. - The wiconfig interface is changed so that wiconfig cannot be used. - 'ancontrol' of FreeBSD is not ported. - Only infrastructure mode is tested. - WEP is not supported. Though I only have an Aironet card, Cisco card should be expected to work.
2000-12-12 02:16:50 +03:00
file dev/ic/an.c an
Support WEP functions for awi driver. arc4 implementation by Kalle Kaukonen has been added. define "wlan" in files. XXX: only awi depends on wlan for now. Allow authentication for adhoc (IBSS) mode. Disable adhoc mode without bssid (mediaopt adhoc,flag0) for FH radio. FH cannot work without synchronization by beacons. Align IP header for ethernet encapsulation (IFF_FLAG0) mode. Print available access points for IFF_DEBUG.
2000-07-04 18:27:56 +04:00
# AMD 79c930-based 802.11 cards
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Support WEP functions for awi driver. arc4 implementation by Kalle Kaukonen has been added. define "wlan" in files. XXX: only awi depends on wlan for now. Allow authentication for adhoc (IBSS) mode. Disable adhoc mode without bssid (mediaopt adhoc,flag0) for FH radio. FH cannot work without synchronization by beacons. Align IP header for ethernet encapsulation (IFF_FLAG0) mode. Print available access points for IFF_DEBUG.
2000-07-04 18:27:56 +04:00
device awi: arp, wlan, ifnet
file dev/ic/awi.c awi
file dev/ic/am79c930.c awi
divided into PCMCIA attachment and common code of wi. since if_wi_ieee.h does not depend for pcmcia, sys/dev/pcmcia/if_wi_ieee.h was moved to sys/dev/ic/wi_ieee.h .
2001-05-06 07:26:38 +04:00
# Lucent & Intersil WaveLan IEEE (802.11)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
device<tab> attach<tab> file<tab>
2004-02-14 19:35:58 +03:00
device wi: arp, wlan, ifnet
divided into PCMCIA attachment and common code of wi. since if_wi_ieee.h does not depend for pcmcia, sys/dev/pcmcia/if_wi_ieee.h was moved to sys/dev/ic/wi_ieee.h .
2001-05-06 07:26:38 +04:00
file dev/ic/wi.c wi
Import config(9) file and register HAL's files in the build machinery.
2008-12-11 08:42:18 +03:00
# Atheros HAL
#
include "external/isc/atheros_hal/conf/files.ath_hal"
Complete replacement of the old 802.11 layer with the new.
2003-10-13 12:34:15 +04:00
# Atheros 5210/5211/5212 multi-mode 802.11
#
device<tab> attach<tab> file<tab>
2004-02-14 19:35:58 +03:00
device ath: arp, wlan, ifnet
patches for new wifi devices.
2013-03-30 06:38:58 +04:00
file dev/ic/ath.c ath
file dev/ic/ath_netbsd.c ath
file dev/ic/athrate-sample.c ath
Complete replacement of the old 802.11 layer with the new.
2003-10-13 12:34:15 +04:00
Add driver atw for PCI/Mini-PCI/Cardbus 802.11b NICs based on the ADMtek ADM8211. Read the man page for bugs and other outstanding issues.
2003-07-07 02:56:07 +04:00
# ADMtek ADM8211 802.11
#
device<tab> attach<tab> file<tab>
2004-02-14 19:35:58 +03:00
device atw: arp, wlan, ifnet, smc93cx6
Add driver atw for PCI/Mini-PCI/Cardbus 802.11b NICs based on the ADMtek ADM8211. Read the man page for bugs and other outstanding issues.
2003-07-07 02:56:07 +04:00
file dev/ic/atw.c atw
Add rtw(4).
2004-09-26 07:03:17 +04:00
# Realtek RTL8180 802.11
#
device rtw: arp, wlan, ifnet, smc93cx6
file dev/ic/rtw.c rtw
file dev/ic/rtwphy.c rtw
file dev/ic/rtwphyio.c rtw
Fix a comment for ral.
2006-06-07 19:24:12 +04:00
# Ralink RT2500/RT2600 802.11
Now that rt2661.c uses firmware_*, ral needs attribute firmload.
2006-06-07 16:51:40 +04:00
device ral: arp, ether, ifnet, wlan, firmload
add the dev/ic/ files for ral(4).
2006-06-07 12:06:56 +04:00
file dev/ic/rt2560.c ral
file dev/ic/rt2661.c ral
add autoconf glue for the ralink wireless drivers, basically from PR kern/30449, but changed so that pci/cardbus and usb devices are all called "ral" to the user, so that code can be shared eventually
2005-07-02 00:11:20 +04:00
Add malo(4)@pci driver for Marvell Libertas wireless adaptor Ported from OpenBSD Known issues : - contrary to OpenBSD one, only support pci at the moment, because I don't have the necessary hardware to test PCMCIA / CARDUS Marvell Card - not connected to pmf(9) (unable to test it)
2012-07-30 22:57:17 +04:00
# Marvell Libertas Open
device malo: arp, ether, ifnet, wlan, firmload
file dev/ic/malo.c malo
Break up the ep driver into isa, eisa, and pci front-ends and a bus-independent core driver. Tested on all three bus types, including an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in your kernel config file to catch this one). XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 06:15:42 +04:00
# 3Com Etherlink-III Ethernet controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add the mii_bitbang attribute to the elink3 and tlp drivers.
1999-11-19 21:16:13 +03:00
device ep: arp, ether, ifnet, mii, mii_bitbang
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/elink3.c ep
Break up the ep driver into isa, eisa, and pci front-ends and a bus-independent core driver. Tested on all three bus types, including an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in your kernel config file to catch this one). XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 06:15:42 +04:00
Add info for ex driver.
1998-11-04 03:28:05 +03:00
# 3Com EtherLink XL Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define the `mii_bitbang' attribute, and give it to the `ex' driver.
1999-11-17 20:56:00 +03:00
device ex: arp, ether, ifnet, mii, mii_bitbang
Add info for ex driver.
1998-11-04 03:28:05 +03:00
file dev/ic/elinkxl.c ex
Add files lines for lc device (LEMAC, DEC EtherWORKS III).
1997-08-01 01:56:33 +04:00
# DEC EtherWORKS III (LEMAC) Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device lc: arp, ether, ifnet
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/lemac.c lc
Add files lines for lc device (LEMAC, DEC EtherWORKS III).
1997-08-01 01:56:33 +04:00
Actually define the `le' device.
1996-05-07 12:56:54 +04:00
# LANCE and PCnet Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device le: arp, ether, ifnet
whitespace police
2001-02-24 04:34:28 +03:00
define le24
define le32
add declaration for hd64570, which the ntwo driver uses
1998-07-26 07:29:12 +04:00
file dev/ic/am7990.c le24
Split the LANCE driver into a part specific to the classic chip with 24-bit DMA addresses, and an independant part. Implement support for the 32-bit mode in the newer (79c9xx) chips.
1998-07-21 21:26:45 +04:00
file dev/ic/am79900.c le32
file dev/ic/lance.c le24 | le32
Actually define the `le' device.
1996-05-07 12:56:54 +04:00
Declare the `depca' device here, now that it can attach to multiple busses.
2000-08-11 18:35:57 +04:00
# DEC DEPCA-family of LANCE Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Declare the `depca' device here, now that it can attach to multiple busses.
2000-08-11 18:35:57 +04:00
device depca { }: le24
file dev/ic/depca.c depca
attach le at depca with le_depca
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
# Sun HME Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Declare the `hme' device.
1999-06-27 16:43:08 +04:00
device hme: arp, ether, ifnet, mii
file dev/ic/hme.c hme
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
Driver for Sun GEM gigabit ethernet, Sun ERI 10/100, and Apple GMAC.
2001-09-16 04:11:41 +04:00
# Sun GEM Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Driver for Sun GEM gigabit ethernet, Sun ERI 10/100, and Apple GMAC.
2001-09-16 04:11:41 +04:00
device gem: arp, ether, ifnet, mii
file dev/ic/gem.c gem
Config glue for the Designware GMAC core. Switch allwinner specific awge driver over to use it.
2014-09-08 18:26:16 +04:00
# Synopsis Designware GMAC core, as found on allwinner a20
# and other SoCs
device awge: arp, ether, ifnet, mii
file dev/ic/dwc_gmac.c awge
Add the dp8390 driver back end/attribute.
1997-04-29 09:11:32 +04:00
# 8390-family Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
* Don't make IPKDB an option-dependency of IPKDB_DP8390 (IPKDB_DP8390 does not "imply" IPKDB ... it is merely an IPKDB parameter). * Place IPKDB-related selectors in lower-case.
2002-10-11 05:00:35 +04:00
defflag opt_ipkdb.h IPKDB_DP8390
Add the dp8390 driver back end/attribute.
1997-04-29 09:11:32 +04:00
define dp8390nic
* Don't make IPKDB an option-dependency of IPKDB_DP8390 (IPKDB_DP8390 does not "imply" IPKDB ... it is merely an IPKDB parameter). * Place IPKDB-related selectors in lower-case.
2002-10-11 05:00:35 +04:00
file dev/ic/dp8390.c dp8390nic | ipkdb_dp8390
Add the dp8390 driver back end/attribute.
1997-04-29 09:11:32 +04:00
if_media support for the DP83905 AT/LANTIC (a souped-up DP8390).
2001-12-16 03:22:43 +03:00
# National Semiconductor DP83905 AT/LANTIC Ethernet media support
#
define dp83905
file dev/ic/dp83905.c dp83905
Add code to support the bugged Macronix MX98905 chip, as used in several podulebus Ethernet cards. This replaces the NE2000 memory-access routines with ones that don't try to transfer more than 255 bytes at a time. This code should perhaps be merged into ne2000.c, but presumably most NE2000 clones won't need it.
2001-12-15 20:47:34 +03:00
# Macronix MX98905 Ethernet controller
# (use as an attribute for an "ne" bus attachment)
#
define mx98905
file dev/ic/mx98905.c mx98905
config(8) glue for Token-Ring and TROPIC drivers.
1999-03-23 01:33:35 +03:00
# TROPIC Token-Ring controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
config(8) glue for Token-Ring and TROPIC drivers.
1999-03-23 01:33:35 +03:00
device tr: arp, token, ifnet
file dev/ic/tropic.c tr
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
# NCR 5380 SCSI Bus Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
define ncr5380sbc
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/ncr5380sbc.c ncr5380sbc
Move `nca' declaration to `conf/files'.
2000-03-20 14:03:42 +03:00
device nca: scsi, ncr5380sbc
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
Add entries for the NatSemi MM58167 time-of-day clock chip and the chipset used in the Sun2 "sc" SCSI adapters.
2001-04-20 20:39:22 +04:00
# Sun sc PAL SCSI Bus Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add entries for the NatSemi MM58167 time-of-day clock chip and the chipset used in the Sun2 "sc" SCSI adapters.
2001-04-20 20:39:22 +04:00
define sunscpal
file dev/ic/sunscpal.c sunscpal
device ssc: scsi, sunscpal
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
# DEC FDDI Chipset
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
define pdq
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/pdq.c pdq
file dev/ic/pdq_ifsubr.c pdq
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
# Cyclades Cyclom-8/16/32
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device cy: tty
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/cy.c cy needs-flag
Add stub for cyclades multi-port serial cards
1996-09-24 21:43:35 +04:00
Centralize the declaration of the "en" driver (Efficient Networks, Inc. 155Mb/sec ATM interface).
1996-11-13 02:58:01 +03:00
# Efficient Networks, Inc. ATM interface
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device en: atm, ifnet
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/midway.c en
Centralize the declaration of the "en" driver (Efficient Networks, Inc. 155Mb/sec ATM interface).
1996-11-13 02:58:01 +03:00
Define the ncr53c9x attribute to pull in the MI 53c9x driver.
1997-02-27 04:13:45 +03:00
# NCR 53x9x or Emulex ESP SCSI Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define the ncr53c9x attribute to pull in the MI 53c9x driver.
1997-02-27 04:13:45 +03:00
define ncr53c9x
Move esp declaration to conf/files.
2000-03-25 22:58:04 +03:00
device esp: scsi, ncr53c9x
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/ncr53c9x.c ncr53c9x
Define the ncr53c9x attribute to pull in the MI 53c9x driver.
1997-02-27 04:13:45 +03:00
Move spc into the MI area.
2004-07-07 12:41:34 +04:00
# Fujitsu MB87030/MB89352 SCSI Protocol Controller
device spc: scsi
file dev/ic/mb89352.c spc
Move the sgimips "sbic" driver from arch/sgimips/hpc/sbic.c to dev/ic/wd33c93.c. This may not be the best WD33C93 driver we've got, but it's the most recently worked on and probably the most portable, so it seems like a good basis for further work (and in particular an acorn26 driver for the Acorn SCSI card). There's no functional change in this commit, and sgimips kernels still compile.
2006-08-27 02:06:36 +04:00
# Western Digital WD33C93/WD33C93A SCSI Bus Interface Controller
define wd33c93
file dev/ic/wd33c93.c wd33c93
Attachment for the HD44780 display and keypad on the front of Cobalt machines.
2003-01-20 04:26:12 +03:00
# Hitachi HD44780 LCD panel controller
define hd44780
file dev/ic/hd44780_subr.c hd44780
file dev/ic/lcdkp_subr.c hd44780
new attribute matrixkp
2005-01-31 09:09:03 +03:00
# Matrix keypad
define matrixkp
file dev/ic/matrixkp_subr.c matrixkp
add declaration for hd64570, which the ntwo driver uses
1998-07-26 07:29:12 +04:00
# Hitachi HD64570 serial controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move esp declaration to conf/files.
2000-03-25 22:58:04 +03:00
define hd64570
add declaration for hd64570, which the ntwo driver uses
1998-07-26 07:29:12 +04:00
file dev/ic/hd64570.c hd64570
move ntwoc here now that we have isa and pci attachments
2000-01-04 09:37:05 +03:00
# Riscom/N2 ISA/PCI Sync Serial Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
move ntwoc here now that we have isa and pci attachments
2000-01-04 09:37:05 +03:00
device ntwoc: ifnet, hd64570
Add line for the i82586 driver.
1997-07-23 03:33:33 +04:00
# Intel 82586 Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add line for the i82586 driver.
1997-07-23 03:33:33 +04:00
define i82586
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/i82586.c i82586
Add line for the i82586 driver.
1997-07-23 03:33:33 +04:00
Import MI part of new Intel i82596 Ethernet driver.
2004-03-12 14:37:17 +03:00
# Intel 82596 Ethernet Controller
#
define i82596
file dev/ic/i82596.c i82596
Configuration glue for i82557 fast Ethernet driver.
1999-06-20 20:34:38 +04:00
# Intel 82557/82558/82559 Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Configuration glue for i82557 fast Ethernet driver.
1999-06-20 20:34:38 +04:00
device fxp: ether, ifnet, arp, mii
file dev/ic/i82557.c fxp
Split the arm26 Ether3 (ea) driver into an MI driver for the SEEQ 8005 chip, and a front-end driver for the Ether3. Only semantic change is to remove ea_claimirq() and ea_releaseirq() on the grounds that the seem too spurious to warrant a callback to the front-end.
2000-09-19 00:51:14 +04:00
# SEEQ 8005 Advanced Ethernet Data Link Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Split the arm26 Ether3 (ea) driver into an MI driver for the SEEQ 8005 chip, and a front-end driver for the Ether3. Only semantic change is to remove ea_claimirq() and ea_releaseirq() on the grounds that the seem too spurious to warrant a callback to the front-end.
2000-09-19 00:51:14 +04:00
define seeq8005
file dev/ic/seeq8005.c seeq8005
Pull "sm" driver declaration down from marc-pcmcia branch.
1997-09-02 05:50:32 +04:00
# SMC 91Cxx Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add MII support to smc91cxx driver. This is supported for the 91c100 and 91c100FD (FEAST) controllers. Existing controllers should continue to work as they have. Added the card's memory to the probe message.
2000-07-31 01:34:47 +04:00
device sm: arp, ether, ifnet, mii, mii_bitbang
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/smc91cxx.c sm
Pull "sm" driver declaration down from marc-pcmcia branch.
1997-09-02 05:50:32 +04:00
Device driver for the SMC 83c170 Ethernet PCI Integrated Controller (EPIC/100) used in the SMC EtherPower II. Media control isn't yet supported, due to some MII infrastructure problems which I hope to address soon. This isn't a huge deal, since the PHY defaults to auto-negotiate mode. Also, the device just programs the multicast hash table to accept all multicast, to avoid a hardware bug that causes the multicast address filter to lose in 10Mb/s mode. This bug will be fixed in a more sane way once the media control issues are dealt with.
1998-06-02 05:29:41 +04:00
# SMC 83C170 EPIC/100 Fast Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
miibus -> mii, and give it a locator "phy".
1998-08-11 04:06:12 +04:00
device epic: arp, ether, ifnet, mii
Device driver for the SMC 83c170 Ethernet PCI Integrated Controller (EPIC/100) used in the SMC EtherPower II. Media control isn't yet supported, due to some MII infrastructure problems which I hope to address soon. This isn't a huge deal, since the PHY defaults to auto-negotiate mode. Also, the device just programs the multicast hash table to accept all multicast, to avoid a hardware bug that causes the multicast address filter to lose in 10Mb/s mode. This bug will be fixed in a more sane way once the media control issues are dealt with.
1998-06-02 05:29:41 +04:00
file dev/ic/smc83c170.c epic
Driver for the DEC SGEC, Second Generation Ethernet Controller.
1999-08-08 15:41:28 +04:00
# DEC SGEC Second Generation Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Driver for the DEC SGEC, Second Generation Ethernet Controller.
1999-08-08 15:41:28 +04:00
define sgec
file dev/ic/sgec.c sgec
Add driver for MCA Tiara LANCard / Fujitsu mb86950 EtherStar. Driver provided in PR kern/26899 by Dave Barnes.
2005-04-03 15:21:44 +04:00
# MB86950 Ethernet Controller
#
define mb86950
file dev/ic/mb86950.c mb86950
Define new attribute `mb86960' and new device `mbe'.
1998-03-22 07:37:04 +03:00
# MB8696x Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define new attribute `mb86960' and new device `mbe'.
1998-03-22 07:37:04 +03:00
define mb86960
file dev/ic/mb86960.c mb86960
# Generic MB8696x Ethernet Controller driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define new attribute `mb86960' and new device `mbe'.
1998-03-22 07:37:04 +03:00
device mbe: arp, ether, ifnet, mb86960
Add the Interwave audio chip.
1997-10-07 00:12:26 +04:00
# Interwave Am78C201 audio driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add the Interwave audio chip.
1997-10-07 00:12:26 +04:00
define interwave
file dev/ic/interwave.c interwave
TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it. No optionboards yet for Melody, only audio driver. MPEG data types for audio.c
1997-10-17 03:58:10 +04:00
# TMS 320av110 MPEG2/audio driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it. No optionboards yet for Melody, only audio driver. MPEG data types for audio.c
1997-10-17 03:58:10 +04:00
define tms320av110
file dev/ic/tms320av110.c tms320av110
From marc-pcmcia branch: add declaration of the "ne" driver for NE2000-compatible ethernet cards.
1997-10-15 02:49:02 +04:00
# Novell NE2000-compatible Ethernet cards, based on the
# National Semiconductor DS8390.
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_ipkdb.h IPKDB_NE : IPKDB_DP8390
Oops, `mii' attribute has to go onto the device decl.
2001-02-13 05:31:41 +03:00
device ne: ether, ifnet, arp, dp8390nic, mii
* Don't make IPKDB an option-dependency of IPKDB_DP8390 (IPKDB_DP8390 does not "imply" IPKDB ... it is merely an IPKDB parameter). * Place IPKDB-related selectors in lower-case.
2002-10-11 05:00:35 +04:00
file dev/ic/ne2000.c ne | ipkdb_ne
From marc-pcmcia branch: add declaration of the "ne" driver for NE2000-compatible ethernet cards.
1997-10-15 02:49:02 +04:00
Add device declaration for the "com" driver. In a perfect world, this would be done with attributes, but alas... *sigh*
1997-10-16 04:38:11 +04:00
# 8250/16[45]50-based "com" ports
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
remove the COM_MPLOCK option. always include the spinlock in the softc and always call the simple_* locking functions. the locking functions are compiled out if they are not needed anyway, so a separate option for this doesn't gain anything. this also fixes the serial console on my alpha ES40 (which doesn't make much sense since the com driver should still be under the big lock on alpha, but whatever).
2005-12-27 03:46:38 +03:00
defflag opt_com.h COM_DEBUG
Rename the COM16650 option to COM_16650, for consistency with other com variant options.
2004-05-01 23:03:59 +04:00
# XXX In a perfect world, this would be done with attributes
Add COM_16750 to opt_com.h.
2013-07-27 11:02:03 +04:00
defflag opt_com.h COM_16650 COM_16750
COM_HAYESP COM_PXA2X0 COM_AU1X00
COM_REGMAP COM_FUNCMAP
Allow COM_TOLERANCE to be tweakable. If comspeed returns an invalid rate, don't use that error value to set the speed.
2011-05-28 23:30:19 +04:00
defparam opt_com.h COM_TOLERANCE
Support attachments to `com' needed for the Sun Keyboard/Mouse line disciplines.
2000-09-22 03:29:43 +04:00
device com { } : tty
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/com.c com needs-flag
Add device declaration for the "com" driver. In a perfect world, this would be done with attributes, but alas... *sigh*
1997-10-16 04:38:11 +04:00
Split the PC-like keyboard controller driver into chip back-end and bus front-end.
1999-12-04 01:48:22 +03:00
# PC-like keyboard controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add pckbport attribute, and apply it to pckbc. Somehow I missed this file in the main commit of pckbport. *blush*
2004-03-14 01:45:23 +03:00
device pckbc: pckbport
pckbc_machdep_cnattach has been replaced by pckbport_machdep_cnattach, so the former attribute can be removed.
2004-03-14 16:52:12 +03:00
file dev/ic/pckbc.c pckbc needs-flag
Split the PC-like keyboard controller driver into chip back-end and bus front-end.
1999-12-04 01:48:22 +03:00
Add attimer(4) driver, with ISA and ACPI attachments. attimer(4) is the new body of the part of pcppi(4) that mapped the TIMER1 register to set the pitch of the bell. It was necessary to separate them in order to have a working ACPI attachment (as the two appear as different devices in the ACPI structures).
2005-03-26 02:06:19 +03:00
device attimer
file dev/ic/attimer.c attimer needs-flag
Add entry for CD240[01] driver.
1999-02-13 20:07:36 +03:00
# Cirrus Logic CD240[01] 4-port Multi-Protocol Communications Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add entry for CD240[01] driver.
1999-02-13 20:07:36 +03:00
device clmpcc: tty
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/clmpcc.c clmpcc needs-flag
Add entry for CD240[01] driver.
1999-02-13 20:07:36 +03:00
Split the ug(4) driver in three components: * dev/ic/ug.c (main code shared by the attachments) * dev/isa/ug_isa.c (isa attachment) * dev/acpi/ug_acpi.c (acpi attachment) That means that ug(4) can now be attached via ACPI. Thanks to Mihai Chelaru for the good work.
2007-05-08 20:48:37 +04:00
# Abit uGuru
#
device ug: sysmon_envsys
file dev/ic/ug.c ug needs-flag
Driver for Essential Communications' RoadRunner HIPPI (800 Mb/sec network) card. With some modification, this could probably also work for their Gigabit Ethernet card based on the same chipset...
1998-05-14 04:04:57 +04:00
# Essential Communications Corp. HIPPI Interface
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
device esh: hippi, ifnet
file dev/ic/rrunner.c esh needs-flag
Driver for Essential Communications' RoadRunner HIPPI (800 Mb/sec network) card. With some modification, this could probably also work for their Gigabit Ethernet card based on the same chipset...
1998-05-14 04:04:57 +04:00
Split SMC chipset ARCnet driver into - machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h, using bus_space methods - ZBUS frontend in arch/amiga/dev/if_bah_zbus.c - added IPL_SOFTNET to arch/amiga/include/intr.h, for this Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-03 02:32:06 +04:00
# SMC 90c26, SMC 90C56 (and 90C66 if in compat mode) chip driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename 'arc' into 'arcnet' to avoid conflict with sys/arch/arc/conf/files.arc's machine statement.
2007-11-14 02:22:06 +03:00
device bah: ifnet, arcnet, arp
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/smc90cx6.c bah
Split SMC chipset ARCnet driver into - machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h, using bus_space methods - ZBUS frontend in arch/amiga/dev/if_bah_zbus.c - added IPL_SOFTNET to arch/amiga/include/intr.h, for this Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-03 02:32:06 +04:00
* Redo the way the way the MIDI driver attaches to audio devices. * Improve the midisyn layer a little. * Add a driver for the Yamaha OPL[23] FM synths. The opl driver is not finished yet; it sounds pretty awful. For some strange reason I cannot get any FM sound from my SB64 cards, but a regular SB16 works fine.
1998-08-18 01:16:09 +04:00
# OPL2/OPL3 FM synth driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Get opl MIDI dependecy right.
1998-08-23 02:53:06 +04:00
device opl: midibus, midisyn
* Redo the way the way the MIDI driver attaches to audio devices. * Improve the midisyn layer a little. * Add a driver for the Yamaha OPL[23] FM synths. The opl driver is not finished yet; it sounds pretty awful. For some strange reason I cannot get any FM sound from my SB64 cards, but a regular SB16 works fine.
1998-08-18 01:16:09 +04:00
file dev/ic/opl.c opl
file dev/ic/oplinstrs.c opl
Move the mpu device declaration to conf/files. Let the mpu device attach at the sb device, and then midi at the mpu. Update the mpu at eso attachment.
1999-08-02 21:37:41 +04:00
# MPU401 MIDI UART compatibles
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move the mpu device declaration to conf/files. Let the mpu device attach at the sb device, and then midi at the mpu. Update the mpu at eso attachment.
1999-08-02 21:37:41 +04:00
device mpu: midibus
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/mpu.c mpu needs-flag
Move the mpu device declaration to conf/files. Let the mpu device attach at the sb device, and then midi at the mpu. Update the mpu at eso attachment.
1999-08-02 21:37:41 +04:00
Define the ad1848 attribute here.
1998-08-26 02:38:29 +04:00
# AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define the ad1848 attribute here.
1998-08-26 02:38:29 +04:00
define ad1848
file dev/ic/ad1848.c ad1848
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
# AMD 7930 audio/ISDN codec
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Make am7930 driver machine independent. PR 10032 from Gregory McGarry.
2000-05-02 10:30:49 +04:00
define am7930
file dev/ic/am7930.c am7930
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
Add new arcofi(4) audio driver for NetBSD/hp300, ported from OpenBSD. The arcofi(4) is a driver for the HP "Audio1" device (Siemens PSB 2160 "ARCOFI" phone quality audio chip) found on the HP9000/425e and HP9000/{705,710,745,747} models (but only hp300 attachment is ported for now). The chip supports 8-bit mono 8kHz U-law, A-law and 16-bit mono slinear_be formats. The old HP9000/425e playing tunes with this new arcofi(4) audio driver was also demonstrated at Open Source Conference 2014 Shimane.
2014-08-24 12:17:44 +04:00
# Siemens PSB2160 audio codec, as found in HP systems
device arcofi: audiobus, auconv, mulaw
file dev/ic/arcofi.c arcofi
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
# SPARC `SUNW,audiocs'
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename the audio "bus" attribute audiobus to avoid confusion with audio device.
2002-04-22 13:41:19 +04:00
device audiocs: audiobus, auconv, ad1848
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
file dev/ic/cs4231.c audiocs
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
# AC-97 CODECs
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
define ac97
file dev/ic/ac97.c ac97
Add UDA1341TS audio CODEC support. Code is written by Paul Fleischer.
2012-01-28 12:37:22 +04:00
# UDA1341 CODEC support
define uda1341
file dev/ic/uda1341.c uda1341
Software codec for Oki MSM6258 voice synthesizer. Recording untested.
2001-05-02 16:53:31 +04:00
# Oki MSM6258 support code
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Software codec for Oki MSM6258 voice synthesizer. Recording untested.
2001-05-02 16:53:31 +04:00
define msm6258
file dev/ic/msm6258.c msm6258
Define LSI64854.
1998-08-30 01:52:54 +04:00
# LSI64854 DMA controller back-end
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define LSI64854.
1998-08-30 01:52:54 +04:00
define lsi64854
file dev/ic/lsi64854.c lsi64854
add a backend serial driver for the cirrus logic CL-CD180/1864/1865 8 port chip. this is used in several sbus (sparc) serial boards, as well as an 8 port isa card from riscom. sio16 (sbus) frontend coming shortly. this is heavily based on the com and zs drivers.
2001-10-03 08:25:29 +04:00
# Cirrus Logic CL-CD180/1864/1865 multi port serial controller back-end
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
add a backend serial driver for the cirrus logic CL-CD180/1864/1865 8 port chip. this is used in several sbus (sparc) serial boards, as well as an 8 port isa card from riscom. sio16 (sbus) frontend coming shortly. this is heavily based on the com and zs drivers.
2001-10-03 08:25:29 +04:00
define cd18xx
file dev/ic/cd18xx.c cd18xx
RealTek -> Realtek.
2004-02-13 13:00:54 +03:00
# Realtek 8019/8029 NE2000-compatible network interface subroutines
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define the "rtl80x9" attribute, to pull in code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
1998-10-31 03:43:19 +03:00
define rtl80x9
Put several fixes to ne(4) driver for better 8 bit mode support, especially on RTL8019AS which is also used for non-ISA local bus of embedded controllers and some m68k machines like atari and x68k. * move RTL8019 probe and attach code from each bus attachment to MI ne2000_detect() and ne2000_attach() * change a method for backend and attachment to specify 8 bit mode to use a new sc->sc_quirk member, instead of sc->sc_dmawidth * handle more NE2000 8 bit mode specific settings, including bus_space(9) access width and available size of buffer memory * add a function to detect NE2000 8 bit mode (disabled by default, but enalbed by options NE2000_DETECT_8BIT to avoid possible regression on various ISA clones) * fix ipkdb attachment accordingly (untested) Tested on two NE2000 ISA variants (RTL8019AS and another clone named UL0001) in both 8 bit and 16 bit mode on i386. "Looks good" from nonaka@. See my post on tech-kern for details: http://mail-index.NetBSD.org/tech-kern/2010/02/26/msg007423.html
2010-03-03 16:39:57 +03:00
file dev/ic/rtl80x9.c rtl80x9 needs-flag
Incorporate the changes of RL81x9 driver provided by M. Kanaoka <kanaoka@ann.hi-ho.ne.jp>. He separated the driver into IC specific portion and bus attachment portion and added cardbus attachent.
2000-04-10 11:42:55 +04:00
RealTek -> Realtek.
2004-02-13 13:00:54 +03:00
# Realtek 8129/8139 Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Changes the name of RealTek driver. The new name is `rtk'. This used to be called `rl' and it conflict with RL vax disks, canonical and historical unix driver name. This changes are minimal: it only changes the name of RealTek driver. The filename of source code and a lot of the letter `rl' in source files should be changed shortly.
2000-04-19 12:44:31 +04:00
device rtk: ether, ifnet, arp, mii
Link rtl81x9.c when re* is defined (hi, Toshi!)
2004-05-29 16:12:28 +04:00
file dev/ic/rtl81x9.c rtk | re
Define LSI64854.
1998-08-30 01:52:54 +04:00
Add re(4) RealTek 8139C+/8169/8169S/8110S PCI ethernet adapter driver, from FreeBSD. I haven't tested this code very well, but it seems to work fairly well for me.
2004-05-28 19:35:41 +04:00
# Realtek 8169 Ethernet controllers
#
device re: ether, ifnet, arp, mii
- switch to dev/rtl8169.c from pci/if_re.c. - enable re@cardbus. both of re@pci and re@cardbus seem to work for me.
2005-01-21 15:32:18 +03:00
file dev/ic/rtl8169.c re
Add re(4) RealTek 8139C+/8169/8169S/8110S PCI ethernet adapter driver, from FreeBSD. I haven't tested this code very well, but it seems to work fairly well for me.
2004-05-28 19:35:41 +04:00
Move the `wdc' device into `conf/files'.
1998-11-23 00:57:47 +03:00
# Common code for ESDI/IDE/etc. controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Don't assume wdc-specific ATA / ATAPI code should be brought in if atabus or atapibus are configured; use a separate wdc_common attribute to indicate that the shared wdc code is also present.
2004-08-12 08:23:02 +04:00
define wdc_common
Add PIOBM (busmastering transfer using ATA PIO mode) support. The PIOBM is used by only one driver (will be added later, stay tuned) and intruduce an attribute "ata_piobm" so that it will be conditionally compiled in. The "ata_dma" (busmastering transfer using ATA DMA mode) and "ata_udma" (busmastering transfer using ATA Ultra DMA mode) attributes are also added for consistency, but unused for now.
2006-09-07 16:34:41 +04:00
define ata_dma
define ata_udma
define ata_piobm
Don't assume wdc-specific ATA / ATAPI code should be brought in if atabus or atapibus are configured; use a separate wdc_common attribute to indicate that the shared wdc code is also present.
2004-08-12 08:23:02 +04:00
device wdc: ata, wdc_common
Make the ATA mid-layer appears as atabus, as proposed in http://mail-index.netbsd.org/tech-kern/2003/09/25/0006.html This adds a device (atabus) between IDE controllers and wd or atapibus, to have each ATA channel show up in the device tree. Later there will be atabus devices in /dev, so that we can do IOCTL on them. Each atabus has its own kernel thread, to handle operations that needs polling, e.g. reset and others. Device probing on each bus it defered to the atabus thread creation. This allows to do the reset and basic device probes in parallel, which reduce boot time on systems with several pciide controllers.
2003-10-08 14:58:12 +04:00
defparam ATADEBUG_MASK
2013-09-08 16:51:14 +04:00
defflag opt_ata.h ATADEBUG
defparam opt_ata.h ATADEBUG_MASK
defflag opt_wdc.h WDC_NO_IDS
Let config(1) know that #define ATADEBUG goes in opt_ata.h. In dev/ic/wdc.c and in dev/ata/ata.c, #include "opt_ata.h", and make both the files compile with or *without* ATADEBUG. Do not compile with ATADEBUG by default.
2007-03-17 09:41:35 +03:00
device<tab> attach<tab> file<tab>
2004-02-14 19:35:58 +03:00
device atabus: atapi,ata_hl
attach atabus at ata
Add PIOBM (busmastering transfer using ATA PIO mode) support. The PIOBM is used by only one driver (will be added later, stay tuned) and intruduce an attribute "ata_piobm" so that it will be conditionally compiled in. The "ata_dma" (busmastering transfer using ATA DMA mode) and "ata_udma" (busmastering transfer using ATA Ultra DMA mode) attributes are also added for consistency, but unused for now.
2006-09-07 16:34:41 +04:00
# The strange expression is to dump ata_* definitions to ata_dma.h.
file dev/ic/wdc.c (ata_dma | ata_udma | ata_piobm | atabus) & atabus & wdc_common needs-flag
Shuffle wd/wdc driver files around (via repository copies). wdc now lives in dev/ic, wd now lives in dev/ata. there's now a 'ata' interface attribute defined in conf/files, but wdc can't go there yet because some ports still use private versions based on the old ISA version.
1998-01-15 02:36:30 +03:00
Workbit NinjaATA-32 busmastering PIO IDE controller driver (njata) This driver supports NinjaATA-32Bi and NPATA-32 chips, which are used for CardBus ATA interface cards and CardBus CompactFlash adapters.
2006-09-07 18:22:07 +04:00
# Workbit NinjaATA-32 IDE controllers
device njata: ata, ata_piobm, wdc_common
file dev/ic/ninjaata32.c njata
"upc" uses "wdc", so put the former after the latter.
2000-08-17 22:56:17 +04:00
# CHIPS and Technologies 82C7[12][01] Universal Peripheral Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
"upc" uses "wdc", so put the former after the latter.
2000-08-17 22:56:17 +04:00
device upc { [offset = -1] }
attach wdc at upc with wdc_upc
attach com at upc with com_upc
cleanup old lpt(4) attachment, and glue ppbus in so that they can coexist: * lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c is included there too; dev/ic/lpt.c is not included if ppbus is configured or if there is alternative platform lpt (like for pc532) * g/c MD lpt definitions and custom puc/upc attachments, glue moved to conf/files and dev/pci/files.pci respectively; remove device lpt definition from dev/isa/files.isa * add ppbus parport attribute, atppc device attachments, adjust plip and lpt glue
2004-01-20 22:58:00 +03:00
attach lpt at upc with lpt_upc
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/upc.c upc
file dev/ic/wdc_upc.c wdc_upc
file dev/ic/com_upc.c com_upc
cleanup old lpt(4) attachment, and glue ppbus in so that they can coexist: * lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c is included there too; dev/ic/lpt.c is not included if ppbus is configured or if there is alternative platform lpt (like for pc532) * g/c MD lpt definitions and custom puc/upc attachments, glue moved to conf/files and dev/pci/files.pci respectively; remove device lpt definition from dev/isa/files.isa * add ppbus parport attribute, atppc device attachments, adjust plip and lpt glue
2004-01-20 22:58:00 +03:00
file dev/ic/lpt_upc.c lpt_upc
"upc" uses "wdc", so put the former after the latter.
2000-08-17 22:56:17 +04:00
Split the ahcisata driver in pci front-end and bus-independant back-end.
2007-05-12 15:04:58 +04:00
# AHCI-compatible SATA controllers
define ahcisata_core
file dev/ic/ahcisata_core.c ahcisata_core
Apply back changes that were reverted on Jul 24 and Jul 26 (general ata/wdc cleanup and SATA PMP support), now that I'm back to fix the fallouts.
2012-07-31 19:50:31 +04:00
device ahcisata: ata, ata_dma, ata_udma, sata, sata_fis, sata_pmp, ahcisata_core
Split the ahcisata driver in pci front-end and bus-independant back-end.
2007-05-12 15:04:58 +04:00
As, siisata attaches not just at pci, but for a while now, also at cardbus, move siisata core driver config to the propper config file.
2009-09-26 23:01:04 +04:00
# Silicon Image SteelVine SATA-II controllers
define siisata
file dev/ic/siisata.c siisata
Apply back changes that were reverted on Jul 24 and Jul 26 (general ata/wdc cleanup and SATA PMP support), now that I'm back to fix the fallouts.
2012-07-31 19:50:31 +04:00
device siisata: ata, ata_dma, ata_udma, sata, sata_fis, sata_pmp, siisata
As, siisata attaches not just at pci, but for a while now, also at cardbus, move siisata core driver config to the propper config file.
2009-09-26 23:01:04 +04:00
Marvell has two "l"s, but not two "e"s. (Also, Melllvar has three "l"s, but that's not really relevant here.)
2009-09-26 23:05:07 +04:00
# Marvell Serial-ATA Host Controller
Support Marvell Hercules-I/II SATA Controllers.
2009-07-27 16:34:12 +04:00
define mvsata
file dev/ic/mvsata.c mvsata
This change adds SATA port multiplier support to mvsata(4).
2013-02-11 01:21:29 +04:00
device mvsata: ata, ata_dma, ata_udma, wdc_common, sata, sata_pmp, mvsata
Support Marvell Hercules-I/II SATA Controllers.
2009-07-27 16:34:12 +04:00
defflag opt_mvsata.h MVSATA_WITHOUTDMA
This is the long-awaited "new Tulip driver", a complete, from-scratch rewrite of the driver for the DECchip 21x4x Ethernet chips, and a variety of clones. Currently, the driver supports the Winbond 89C840F (this works pretty well), and the Lite-On PNIC (e.g. NetGear PCI boards), however Lite-On support may be broken [I may simply have a busted test board]. Eventually, support for the Macronix and ASIX chips will filter into this driver, and then, slowly, support for the genuine DEC chips, and maybe even the DE-425 EISA model.
1999-09-01 04:32:41 +04:00
# DECchip 21x4x Ethernet controller family, and assorted clones.
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add the mii_bitbang attribute to the elink3 and tlp drivers.
1999-11-19 21:16:13 +03:00
device tlp: arp, ether, ifnet, mii, mii_bitbang
This is the long-awaited "new Tulip driver", a complete, from-scratch rewrite of the driver for the DECchip 21x4x Ethernet chips, and a variety of clones. Currently, the driver supports the Winbond 89C840F (this works pretty well), and the Lite-On PNIC (e.g. NetGear PCI boards), however Lite-On support may be broken [I may simply have a busted test board]. Eventually, support for the Macronix and ASIX chips will filter into this driver, and then, slowly, support for the genuine DEC chips, and maybe even the DE-425 EISA model.
1999-09-01 04:32:41 +04:00
file dev/ic/tulip.c tlp
Add declaration for the Adaptec AIC-6915 64-bit 10/100 Ethernet interface. Note: this is a placeholder right now; the driver should be ready in the next few days.
1999-10-13 22:37:12 +04:00
# Adaptec AIC-6915 Ethernet interface
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add declaration for the Adaptec AIC-6915 64-bit 10/100 Ethernet interface. Note: this is a placeholder right now; the driver should be ready in the next few days.
1999-10-13 22:37:12 +04:00
device sf: arp, ether, ifnet, mii
file dev/ic/aic6915.c sf
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
# Mostek time-of-day clock and NVRAM
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
define mk48txx
`mk48txx' no longer needs a flag.
2002-03-28 14:56:32 +03:00
file dev/ic/mk48txx.c mk48txx
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
Define msm6242b driver.
2012-11-14 06:03:25 +04:00
# OKI MSM6242B
#
define msm6242b
file dev/ic/msm6242b.c msm6242b
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
# Intersil 7170 time-of-day clock
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
define intersil7170
file dev/ic/intersil7170.c intersil7170
Add entries for the NatSemi MM58167 time-of-day clock chip and the chipset used in the Sun2 "sc" SCSI adapters.
2001-04-20 20:39:22 +04:00
# National Semiconductor MM58167 time-of-day clock
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add entries for the NatSemi MM58167 time-of-day clock chip and the chipset used in the Sun2 "sc" SCSI adapters.
2001-04-20 20:39:22 +04:00
define mm58167
file dev/ic/mm58167.c mm58167
Add MI driver for mc146818 based time-of-day clock with todr(9) support.
2003-10-29 20:00:40 +03:00
# Motorola mc146818 (and compatible) time-of-day clock
#
define mc146818
file dev/ic/mc146818.c mc146818
MI part of the Ricoh RS5C313 real time clock todr(9) driver. Based on the code from landisk port. With help from gdamore@
2006-09-07 05:12:00 +04:00
# Ricoh RS5C313 time of-day-clock
#
define rs5c313
file dev/ic/rs5c313.c rs5c313
Config attribute for the DL10019 MII support.
2001-02-13 04:56:28 +03:00
# D-Link DL10019/10022 NE2000-compatible network interface subroutines
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Config attribute for the DL10019 MII support.
2001-02-13 04:56:28 +03:00
define dl10019
file dev/ic/dl10019.c dl10019
MII access routines for ASIX AX88190.
2001-08-04 15:38:57 +04:00
# ASIX AX88190 NE2000-compatible network interface subroutines
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
MII access routines for ASIX AX88190.
2001-08-04 15:38:57 +04:00
define ax88190
file dev/ic/ax88190.c ax88190
Split we(4) driver to bus independant and ISA-specific parts, in preparation for MCA attachment.
2001-03-23 22:08:53 +03:00
# WD/SMC 80x3 family, SMC Elite Ultra [8216], SMC EtherEZ
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Split we(4) driver to bus independant and ISA-specific parts, in preparation for MCA attachment.
2001-03-23 22:08:53 +03:00
device we: ether, ifnet, arp, dp8390nic
file dev/ic/we.c we
Prepare for MCA attachment: * split off sharable stuff to dev/ic/ate_subr.[ch], move ate(4) device definition to conf/files * cosmetic: attach with ate_isa
2001-03-31 04:26:53 +04:00
# Allied-Telesis Ethernet driver based on Fujitsu MB8696xA controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Prepare for MCA attachment: * split off sharable stuff to dev/ic/ate_subr.[ch], move ate(4) device definition to conf/files * cosmetic: attach with ate_isa
2001-03-31 04:26:53 +04:00
device ate: arp, ether, ifnet, mb86960
Overhaul of fmv(4) driver: - Split if_fmv.c into MI/MD part and add ISA-PnP attachment for FMV-183. (XXX FMV-184 is not tested. It would require extra media-select functions..) - Fix probe functions of fmv_isa so that FMV-181A/182A will also match. Fixes port-i386/9476.
2002-10-05 19:16:10 +04:00
# Fujitsu FMV-18x Ethernet driver based on Fujitsu MB8696xA controllers
#
device fmv: arp, ether, ifnet, mb86960
file dev/ic/fmv.c fmv
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 22:17:05 +03:00
# Crystal Semiconductor CS8900, CS8920, and CS8920M Ethernet
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 22:17:05 +03:00
device cs: arp, ether, ifnet
add tscs
2005-01-08 05:56:35 +03:00
device tscs: arp, ether, ifnet
file dev/ic/cs89x0.c cs | tscs
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
# Radio device attributes
#
define tea5757
device<tab> attach<tab> file<tab>
2004-02-14 19:35:58 +03:00
file dev/ic/tea5757.c tea5757
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
define lm700x
device<tab> attach<tab> file<tab>
2004-02-14 19:35:58 +03:00
file dev/ic/lm700x.c lm700x
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 22:17:05 +03:00
Add envctrl(4): Sun Ultra Enterprise 450 environmental monitoring driver. Also add accompanying i2c controller driver, pcf8584. Both written by me. Some cosmetic improvements from Iain Hibbert. ok <martin>
2007-04-14 23:33:27 +04:00
# Philips PCF8584 i2c controller
define pcf8584
file dev/ic/pcf8584.c pcf8584
Added PCA9564 I2C Controller driver.
2010-04-09 14:09:49 +04:00
# PCA9564 i2c controller
define pca9564
file dev/ic/pca9564.c pca9564
add some common code to support the ACPI power management timer independly of ACPI
2006-06-26 20:13:21 +04:00
# ACPI power management timer (hardware access, independent of ACPI)
#
define acpipmtimer
file dev/ic/acpipmtimer.c acpipmtimer
High Precision Event Timer driver, following Intel specifications. Allow attachement at both ACPI (hpet@acpi) and AMD8111 LPC Controller (hpet@amdpcib). Requested by xtraeme, and tested by a few users.
2007-03-08 17:26:26 +03:00
device hpet
file dev/ic/hpet.c hpet needs-flag
Add driver for DesignWare 32-bit timer as found in Rockchip RK3066/PX2, from FUKAUMI Naoki <fun@naobsd.org>
2015-01-17 18:04:47 +03:00
# DesignWare timer
device dwctmr
file dev/ic/dwc_tmr.c dwctmr
Support SMSC LAN9118 Family Ethernet interfaces device driver. It tested on GUMSTIX only.
2009-08-09 10:40:09 +04:00
# SMSC LAN9118 Family Ethernet Controller
#
Add attribute mii to smsh(4).
2009-11-25 11:52:38 +03:00
device smsh: arp, ether, ifnet, mii
Support SMSC LAN9118 Family Ethernet interfaces device driver. It tested on GUMSTIX only.
2009-08-09 10:40:09 +04:00
file dev/ic/lan9118.c smsh
First draft of drivers for the Apple System Management Controller. Device interface derived by reading the Linux driver source code and <http:///www.parhelia.ch/blog/statics/k3_keys.html> as of 2012-12-05. Includes support for attaching fan and temperature sensors to sysmon. No accelerometer yet. Compile-tested only, based on some run-testing of experiments from userland. Module attachment is not quite finished, so it won't work yet.
2014-04-01 21:47:36 +04:00
# Apple System Management Controller
#
Rework Apple SMC attachment goo and split into multiple modules. The four modules are apple_smc for the core functions, apple_smc_acpi for attachment at acpi, and apple_smc_fan & apple_smc_temp for stuff on the SMC. Seems like there's a lot more bookkeeping necessary to maintain children of an applesmc device implemented by loadable modules. Maybe there's a better way I just haven't figured out yet.
2014-04-01 21:48:39 +04:00
define applesmcbus { }
Fix apple_smc config in conf/files.
2014-04-01 21:49:30 +04:00
device applesmc: applesmcbus
First draft of drivers for the Apple System Management Controller. Device interface derived by reading the Linux driver source code and <http:///www.parhelia.ch/blog/statics/k3_keys.html> as of 2012-12-05. Includes support for attaching fan and temperature sensors to sysmon. No accelerometer yet. Compile-tested only, based on some run-testing of experiments from userland. Module attachment is not quite finished, so it won't work yet.
2014-04-01 21:47:36 +04:00
file dev/ic/apple_smc.c applesmc
# Apple SMC fan sensors and control
Fix apple_smc config in conf/files.
2014-04-01 21:49:30 +04:00
device applesmcfan: applesmcbus, sysmon_envsys
attach applesmcfan at applesmcbus with apple_smc_fan
First draft of drivers for the Apple System Management Controller. Device interface derived by reading the Linux driver source code and <http:///www.parhelia.ch/blog/statics/k3_keys.html> as of 2012-12-05. Includes support for attaching fan and temperature sensors to sysmon. No accelerometer yet. Compile-tested only, based on some run-testing of experiments from userland. Module attachment is not quite finished, so it won't work yet.
2014-04-01 21:47:36 +04:00
file dev/ic/apple_smc_fan.c applesmcfan
# Apple SMC temperature sensors
Fix apple_smc config in conf/files.
2014-04-01 21:49:30 +04:00
device applesmctemp: applesmcbus, sysmon_envsys
attach applesmctemp at applesmcbus with apple_smc_temp
First draft of drivers for the Apple System Management Controller. Device interface derived by reading the Linux driver source code and <http:///www.parhelia.ch/blog/statics/k3_keys.html> as of 2012-12-05. Includes support for attaching fan and temperature sensors to sysmon. No accelerometer yet. Compile-tested only, based on some run-testing of experiments from userland. Module attachment is not quite finished, so it won't work yet.
2014-04-01 21:47:36 +04:00
file dev/ic/apple_smc_temp.c applesmctemp
Rework Apple SMC attachment goo and split into multiple modules. The four modules are apple_smc for the core functions, apple_smc_acpi for attachment at acpi, and apple_smc_fan & apple_smc_temp for stuff on the SMC. Seems like there's a lot more bookkeeping necessary to maintain children of an applesmc device implemented by loadable modules. Maybe there's a better way I just haven't figured out yet.
2014-04-01 21:48:39 +04:00
# Apple SMC accelerometer (not yet implemented!)
Fix apple_smc config in conf/files.
2014-04-01 21:49:30 +04:00
#device applesmcaccel: applesmcbus, sysmon_envsys
#attach applesmcaccel at applesmcbus with apple_smc_accel
First draft of drivers for the Apple System Management Controller. Device interface derived by reading the Linux driver source code and <http:///www.parhelia.ch/blog/statics/k3_keys.html> as of 2012-12-05. Includes support for attaching fan and temperature sensors to sysmon. No accelerometer yet. Compile-tested only, based on some run-testing of experiments from userland. Module attachment is not quite finished, so it won't work yet.
2014-04-01 21:47:36 +04:00
#file dev/ic/apple_smc_accel.c applesmcaccel
Import DRM drivers, brought into shape by Yorick Hardy, posted to tech-x11. Minor modifications by me: -use an mi device major number -(coarsly) divided into pci card specific and less specific parts, moved the latter to dev/drm -renamed autoconf attributes to reflect this Todo: -adapt all card frontends but i915 to drm include file location -review the mtrr change -make the change to agp_i810.c coexist with the fix for buggy VESA BIOSes which is commented out temporarily -RCS IDs etc style stuff -LKM support (rescan support for vga) -test
2007-03-20 21:05:25 +03:00
# DRM - Direct Rendering Infrastructure: dev/drm
define drm {}
make external drm the default.
2009-06-22 00:15:26 +04:00
include "external/bsd/drm/conf/files.drm"
add VirtualBox DRM driver
2011-02-20 18:40:21 +03:00
include "dev/drm/files.drm"
Import DRM drivers, brought into shape by Yorick Hardy, posted to tech-x11. Minor modifications by me: -use an mi device major number -(coarsly) divided into pci card specific and less specific parts, moved the latter to dev/drm -renamed autoconf attributes to reflect this Todo: -adapt all card frontends but i915 to drm include file location -review the mtrr change -make the change to agp_i810.c coexist with the fix for buggy VESA BIOSes which is commented out temporarily -RCS IDs etc style stuff -LKM support (rescan support for vga) -test
2007-03-20 21:05:25 +03:00
Move linux_work.c and workqueue.h from sys/external/bsd/drm2 to sys/external/common so that they can be used by others. LGTM from riastradh@ These should really live outside sys/external, but that can be decided later
2016-02-25 01:04:15 +03:00
# Linux API support
include "external/bsd/common/conf/files.linux"
Merge riastradh-drm2 to HEAD.
2014-03-18 22:20:35 +04:00
# DRM/KMS - Newer direct rendering manager with kernel mode-switching
include "external/bsd/drm2/drm/files.drmkms"
add a tpm driver from bsssd.sourceforge.net
2012-01-22 10:44:28 +04:00
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
# Definitions for wscons
# device attributes: display, display with emulator, keyboard, and mouse
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Make the right defaults for kbdmux and mux locators.
2001-12-05 07:05:37 +03:00
define wsdisplaydev {[kbdmux = 1]}
define wsemuldisplaydev {[console = -1], [kbdmux = 1]}
define wskbddev {[console = -1], [mux = 1]}
define wsmousedev {[mux = 0]}
Add support for virtual consoles to igsfb. Works fine on a Krups, needs testing on other ports.
2006-02-23 11:01:59 +03:00
define vcons
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
# attribute to pull in raster support
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
define wsrasteremulops
Put definitions and subroutines needed for all PC display adapters (MGA/GCA and compatibles) into global headers / source files. Let the VGA driver use them.
1998-05-28 20:53:18 +04:00
# common PC display functions
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_pcdisplay.h PCDISPLAY_SOFTCURSOR
whitespace police
2001-02-24 04:34:28 +03:00
define pcdisplayops
Put definitions and subroutines needed for all PC display adapters (MGA/GCA and compatibles) into global headers / source files. Let the VGA driver use them.
1998-05-28 20:53:18 +04:00
file dev/ic/pcdisplay_subr.c pcdisplayops
add new file for pcdisplay mapping tables
1998-06-27 01:01:32 +04:00
file dev/ic/pcdisplay_chars.c pcdisplayops
Move definition of the 'fb' attribute to global scope and make machfb@pci require it. On most archs this does not change anything, but on sparc{,64} it allows linking of kernels that have machfb as the only framebuffer. Solution suggested by Quentin.
2006-05-28 12:57:53 +04:00
# an attribute used by arch specific config files to include /dev/fb* (or
# equivalent) support - on most archs this is just a NOP (untill, maybe
# someday when we might make /dev/fb* support MI)
define fb
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
# VGA graphics
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
put the "VGA_CONSOLE_SCREENTYPE" parameter into opt_vga.h
2002-07-07 19:09:52 +04:00
defparam opt_vga.h VGA_CONSOLE_SCREENTYPE
whitespace
2002-06-29 02:32:58 +04:00
defflag opt_vga.h VGA_CONSOLE_ATI_BROKEN_FONTSEL
Add VGA raster graphics console driver. It is written as an extension to char-cell based vga(4) driver, and fully compatible with existing apps like XFree86. Currently it supports 80x25, 80x30, 80x40 and 80x50 text modes using emulation. You can enable it by specifying `options VGA_RASTERCONSOLE' in your kernel config file. Note that displaying multilingual text doesn't work yet. Necessary code is already there, but userland stuff and some functionality isn't ready for prime time yet. I'm working on them.
2002-10-15 22:14:41 +04:00
defflag opt_vga.h VGA_RASTERCONSOLE
Changes to allow machines which don't use text mode at the boot time to use generic VGA driver(s): - Allow VGA drivers to use wsfont instead of builtin font. - Add vga_reset() function, which will be called from MD consinit(), to put VGA into text mode. This function is enabled by options VGA_RESET.
2003-02-01 00:57:23 +03:00
defflag opt_vga.h VGA_RESET
Merge jmcneill-pm branch.
2007-12-09 23:27:42 +03:00
device vga: displaydev, wsemuldisplaydev, pcdisplayops, drm
Add VGA raster graphics console driver. It is written as an extension to char-cell based vga(4) driver, and fully compatible with existing apps like XFree86. Currently it supports 80x25, 80x30, 80x40 and 80x50 text modes using emulation. You can enable it by specifying `options VGA_RASTERCONSOLE' in your kernel config file. Note that displaying multilingual text doesn't work yet. Necessary code is already there, but userland stuff and some functionality isn't ready for prime time yet. I'm working on them.
2002-10-15 22:14:41 +04:00
file dev/ic/vga.c vga & !vga_rasterconsole needs-flag
file dev/ic/vga_raster.c vga_rasterconsole needs-flag
file dev/ic/vga_subr.c vga | vga_rasterconsole
file dev/ic/vga_common.c vga | vga_rasterconsole
use the bus independent stuff from ic/ct65550* and leave only the PCI specific bits in pci/chipsfb.c
2011-02-10 00:21:32 +03:00
Add (unfinished) igsfb driver. While here g/c stale cprofb entry, it's not in the tree and I plan to support CyberPro cards with igsfb driver eventually (where is my netwinder?)
2002-03-30 23:21:21 +03:00
# Integraphics Systems IGA168x and CyberPro framebuffers (linear non-VGA mode)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
igsfb doesn't use rcons, no need to pull it in
2012-01-31 09:08:14 +04:00
device igsfb: wsemuldisplaydev, rasops8, vcons, videomode
igsfb needs-flag.
2003-06-03 02:51:49 +04:00
file dev/ic/igsfb.c igsfb needs-flag
Add some preliminary support for setting up the CyberPro in Netwinder. Setup sequence obtained from Krups OFW with some CyberPro-specific magic from Linux driver. The driver still has a lot of hardcoded stuff, but it is useful enough to bring up wscons on netwinder. XXX: Proper console attachment needs to be written (the driver was originally developed on sparc, where our approach to attaching console is totally different). Caveat emptor!
2002-09-24 22:17:24 +04:00
file dev/ic/igsfb_subr.c igsfb
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
use the bus independent stuff from ic/ct65550* and leave only the PCI specific bits in pci/chipsfb.c
2011-02-10 00:21:32 +03:00
device chipsfb: wsemuldisplaydev, rasops8, vcons, videomode
file dev/ic/ct65550.c chipsfb
defflag opt_chipsfb.h CHIPSFB_DEBUG
defflag opt_chipsfb.h CHIPSFB_WAIT
Import STI wscons(4) driver from OpenBSD and add new driver for PS/2 keyboard / mouse pots of LASI.
2004-08-26 20:48:06 +04:00
# STI (hp graphics)
device sti: wsemuldisplaydev
Add usb_dma attribute for DMA capable USB host controllers and specify that usb_dma attribute to dev/usb/usb_mem.c. usb_mem.c uses bus_dma(9) for DMA memory allocation, but non-DMA capable USB host controllers like slhci(4) doesn't need them at all, and some ports don't bother to prepare MD bus_dma(9) implementation (yet). Discussed on current-users http://mail-index.NetBSD.org/current-users/2011/03/13/msg015995.html and usb_dma attribute is suggested by bouyer@. Tested by kiyohara@ on mmeye with slhci at pcmcia.
2011-03-20 20:54:02 +03:00
file dev/ic/sti.c sti
Import STI wscons(4) driver from OpenBSD and add new driver for PS/2 keyboard / mouse pots of LASI.
2004-08-26 20:48:06 +04:00
Since files.wscons et al. are included by ~all ports anyway, include them in the mi "files" file, and remove include statements from md files. These shouldn't pull in additional kernel code when not in use, so it shouldn't do any harm except a risk of namespace collisions which should be easy to fix.
2008-02-21 00:43:33 +03:00
include "dev/wscons/files.wscons"
include "dev/rasops/files.rasops"
include "dev/wsfont/files.wsfont"
include "dev/wsfb/files.wsfb"
Move eisabus, tcbus attributes here. Attributes that "machine-independent" bus support want to attach to should be declared in conf/files, so that hairy ordering constraints on the inclusions of busses' "files" files in files.{MACHINE} are avoided. isabus, pcibus attributes will go here later. The problem is, for instance, that there are some devices in files.isa currently which require that 'pci' be defined, but there are some PCI devices (e.g. 'sio' on the Alpha) that provide isabus interfaces, i.e. 'isa' busses attach to them. Unless the the bus-attachment attributes are here, it's impossible to declare the busses' files and attribute dependencies in a machine-independent way.
1996-02-28 00:59:14 +03:00
# Attributes which machine-independent bus support can be attached to.
# These should be defined here, because some of these busses can have
# devices which provide these attributes, and we'd like to avoid hairy
# ordering constraints on inclusion of the busses' "files" files.
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
define isabus { } # ISA attachment
define eisabus { } # EISA attachment
define pcibus {[bus = -1]} # PCI attachment
define tcbus { } # TurboChannel attachment
define mcabus { } # MicroChannel attachment
define usbus { } # USB attachment
ieee1394 import from FreeBSD.
2005-07-11 19:29:05 +04:00
define fwbus { } # IEEE 1394 attachment
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
define vmebus { } # VME bus attachment
define acpibus { } # ACPI "bus" attachment
Define `pcmciabus'.
1998-11-26 18:31:22 +03:00
define pcmciabus { [controller = -1], [socket = -1]} # PCMCIA bus attachment
clean up some useless code and variables in cardbus attachment
2008-06-24 21:32:09 +04:00
define cbbus { } # CardBus attachment
define pcmciaslot { } # PCMCIA slot itself
Added SD/MMC support from OpenBSD. tested on i386, amd64 at current-users ML by pgoyette@. tested on zaurus by myself.
2009-04-21 07:00:29 +04:00
define sdmmcbus { } # SD/MMC attachment
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# We need the USB bus controllers here so different busses can
# use them in an 'attach-with'.
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
defparam USB_MEM_RESERVE
2004-12-21 19:36:53 +03:00
defparam USB_MEM_RESERVE
share some code for USB root hub emulation which is common in the 3 host controller implementations, start with two little functions which fake up string descriptors (which were inconststent, language table fetching didn't interoperate with other code in the tree)
2008-02-03 13:57:11 +03:00
define usbroothub
file dev/usb/usbroothub_subr.c usbroothub
Add usb_dma attribute for DMA capable USB host controllers and specify that usb_dma attribute to dev/usb/usb_mem.c. usb_mem.c uses bus_dma(9) for DMA memory allocation, but non-DMA capable USB host controllers like slhci(4) doesn't need them at all, and some ports don't bother to prepare MD bus_dma(9) implementation (yet). Discussed on current-users http://mail-index.NetBSD.org/current-users/2011/03/13/msg015995.html and usb_dma attribute is suggested by bouyer@. Tested by kiyohara@ on mmeye with slhci at pcmcia.
2011-03-20 20:54:02 +03:00
define usb_dma
Fix some comment formatting nits in the USB region.
2013-06-24 20:19:02 +04:00
# UHCI USB controller
#
Add usb_dma attribute for DMA capable USB host controllers and specify that usb_dma attribute to dev/usb/usb_mem.c. usb_mem.c uses bus_dma(9) for DMA memory allocation, but non-DMA capable USB host controllers like slhci(4) doesn't need them at all, and some ports don't bother to prepare MD bus_dma(9) implementation (yet). Discussed on current-users http://mail-index.NetBSD.org/current-users/2011/03/13/msg015995.html and usb_dma attribute is suggested by bouyer@. Tested by kiyohara@ on mmeye with slhci at pcmcia.
2011-03-20 20:54:02 +03:00
device uhci: usbus, usbroothub, usb_dma
whitespace police
2001-02-24 04:34:28 +03:00
file dev/usb/uhci.c uhci needs-flag
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# OHCI USB controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add usb_dma attribute for DMA capable USB host controllers and specify that usb_dma attribute to dev/usb/usb_mem.c. usb_mem.c uses bus_dma(9) for DMA memory allocation, but non-DMA capable USB host controllers like slhci(4) doesn't need them at all, and some ports don't bother to prepare MD bus_dma(9) implementation (yet). Discussed on current-users http://mail-index.NetBSD.org/current-users/2011/03/13/msg015995.html and usb_dma attribute is suggested by bouyer@. Tested by kiyohara@ on mmeye with slhci at pcmcia.
2011-03-20 20:54:02 +03:00
device ohci: usbus, usbroothub, usb_dma
whitespace police
2001-02-24 04:34:28 +03:00
file dev/usb/ohci.c ohci needs-flag
Move eisabus, tcbus attributes here. Attributes that "machine-independent" bus support want to attach to should be declared in conf/files, so that hairy ordering constraints on the inclusions of busses' "files" files in files.{MACHINE} are avoided. isabus, pcibus attributes will go here later. The problem is, for instance, that there are some devices in files.isa currently which require that 'pci' be defined, but there are some PCI devices (e.g. 'sio' on the Alpha) that provide isabus interfaces, i.e. 'isa' busses attach to them. Unless the the bus-attachment attributes are here, it's impossible to declare the busses' files and attribute dependencies in a machine-independent way.
1996-02-28 00:59:14 +03:00
Add xhci placeholder
2012-09-01 15:21:22 +04:00
# EHCI USB2 controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add usb_dma attribute for DMA capable USB host controllers and specify that usb_dma attribute to dev/usb/usb_mem.c. usb_mem.c uses bus_dma(9) for DMA memory allocation, but non-DMA capable USB host controllers like slhci(4) doesn't need them at all, and some ports don't bother to prepare MD bus_dma(9) implementation (yet). Discussed on current-users http://mail-index.NetBSD.org/current-users/2011/03/13/msg015995.html and usb_dma attribute is suggested by bouyer@. Tested by kiyohara@ on mmeye with slhci at pcmcia.
2011-03-20 20:54:02 +03:00
device ehci: usbus, usbroothub, usb_dma
whitespace police
2001-02-24 04:34:28 +03:00
file dev/usb/ehci.c ehci needs-flag
Add some placeholders for the EHCI (USB 2) driver. Don't get your hopes up. I've not even finished reading the (100+) page spec, and I have no hardware.
2000-12-24 09:39:01 +03:00
Fix some comment formatting nits in the USB region.
2013-06-24 20:19:02 +04:00
# xHCI USB3 controller
Add xhci placeholder
2012-09-01 15:21:22 +04:00
#
device xhci: usbus, usbroothub, usb_dma
file dev/usb/xhci.c xhci needs-flag
Add motg(4), a driver for Mentor Graphic's OTG USB controller IP, as found in several SoCs. Only host mode is supported, good enough for umass (USB keys), kubd and ums, and USB2 hubs. It fails to properly talk to USB/serial adapters at this time.
2014-07-16 22:22:23 +04:00
# Mentor graphics OTG IP
options MOTG_ALLWINNER to select the awin specific reg layout
2014-09-13 18:47:35 +04:00
defflag opt_motg.h MOTG_ALLWINNER
Add motg(4), a driver for Mentor Graphic's OTG USB controller IP, as found in several SoCs. Only host mode is supported, good enough for umass (USB keys), kubd and ums, and USB2 hubs. It fails to properly talk to USB/serial adapters at this time.
2014-07-16 22:22:23 +04:00
device motg: usbus, usbroothub, usb_dma
file dev/usb/motg.c motg needs-flag
Add driver for ScanLogic SL811HS/T USB Host Controller. XXX It's experimental code yet. For x68k: USB part of Nereid USB/Ethernet/memory board For ISA: ISA USB Host board from Morphy planning
2002-08-11 17:17:52 +04:00
# SL811HS/T USB controller
Replace to Matthew Orgass's slhci(4). http://mail-index.netbsd.org/tech-kern/2007/06/26/0001.html
2007-08-15 07:53:08 +04:00
defflag opt_slhci.h SLHCI_DEBUG SLHCI_TRY_LSVH SLHCI_PROFILE_TRANSFER
slhci also shares usbroothub_subr.
2008-02-24 08:29:31 +03:00
device slhci: usbus, usbroothub
Add driver for ScanLogic SL811HS/T USB Host Controller. XXX It's experimental code yet. For x68k: USB part of Nereid USB/Ethernet/memory board For ISA: ISA USB Host board from Morphy planning
2002-08-11 17:17:52 +04:00
file dev/ic/sl811hs.c slhci needs-flag
Provide dotg(4) - a driver for the Synposys DesignWare OTG USB IP found in the RaspberryPI. The driver supports host mode and control, interrupt, and bulk transfers only at this point. Heavily based on the FreeBSD driver by Hans Petter Selasky. Thanks to all who helped. Jared McNeill, Michael van Elst and other.
2013-01-10 02:23:44 +04:00
# DesignWare OTG host controller
#
Some dwc2 glue.
2013-09-21 17:22:48 +04:00
include "external/bsd/dwc2/conf/files.dwc2"
move the HID processing defs to a higher context, since it is used by bluetooth and USB code.
2007-09-08 00:17:37 +04:00
# USB HID processing (as used by bluetooth and usb code)
define hid
file dev/usb/hid.c hid
Added SD/MMC support from OpenBSD. tested on i386, amd64 at current-users ML by pgoyette@. tested on zaurus by myself.
2009-04-21 07:00:29 +04:00
# SD Host controller
Add a driver for Realtek RTS5209/RTS5229 Card Reader. Ported from OpenBSD.
2014-03-19 19:26:41 +04:00
device sdhc: sdmmcbus
Added SD/MMC support from OpenBSD. tested on i386, amd64 at current-users ML by pgoyette@. tested on zaurus by myself.
2009-04-21 07:00:29 +04:00
file dev/sdmmc/sdhc.c sdhc needs-flag
Initial import of an SD/MMC driver for the Winbond W83L518D (and probably W83L519D) Integrated Media Reader with PNP bus attachment glue.
2009-10-01 00:44:49 +04:00
# Winbond Integrated Media Reader
device wb: sdmmcbus
file dev/ic/w83l518d.c wb
file dev/ic/w83l518d_sdmmc.c wb
Add a driver for Realtek RTS5209/RTS5229 Card Reader. Ported from OpenBSD.
2014-03-19 19:26:41 +04:00
# Realtek RTS5209/RTS5229 Card Reader
device rtsx: sdmmcbus
file dev/ic/rtsx.c rtsx
add DesignWare SD/MMC controller driver
2014-12-27 04:18:48 +03:00
# DesignWare SD/MMC host controller
defflag opt_dwc_mmc.h DWC_MMC_DEBUG
device dwcmmc: sdmmcbus
file dev/ic/dwc_mmc.c dwcmmc
ARM PrimeCell PL181 (MMCI) host controller glue.
2015-01-28 00:34:43 +03:00
# ARM PrimeCell PL181 (MMCI) host controller
device plmmc: sdmmcbus
file dev/ic/pl181.c plmmc
Add a driver for the Myson Technology MTD803 3-in-1 Fast Ethernet Controller, provided by Peter Bex in PR 18675.
2002-11-08 00:56:56 +03:00
# Myson MTD803 3-in-1 Fast Ethernet Controller
device mtd: arp, ether, ifnet, mii
file dev/ic/mtd803.c mtd
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
# radio devices, attaches to radio hardware driver
device radio
"attach radio at radio": using one word as both attribute and device doesn't work well, radio.c is pulled in even with no such device in the configuration, and the kernel doesn't link due to missing "radio_cd". So call the attribute "radiodev" to avoid confusion.
2002-01-07 20:44:42 +03:00
attach radio at radiodev
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
Add a fwlynx device. Move the file for fwohci to files.ieee1394
2000-11-15 02:37:20 +03:00
# IEEE 1394 controllers
# (These need to be here since it will have both PCI and CardBus attachments)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add IEEE 1394 OHCI node and IEEE 1394 bus. Just placeholders for now.
2000-05-30 04:48:47 +04:00
device fwohci: fwbus
Add spic.
2002-04-22 17:03:06 +04:00
# Sony Programmable I/O Controller
device spic: wsmousedev
file dev/ic/spic.c spic
Add stuff for the CPC700.
2002-05-21 07:01:02 +04:00
# IBM CPC700 PowerPC bridge
define cpcbus { addr, [irq=-1] }
device cpc: cpcbus, pcibus
file dev/ic/cpc700.c cpc
attach com at cpcbus with com_cpcbus
file dev/ic/com_cpcbus.c com_cpcbus
device cpctim
attach cpctim at cpcbus
file dev/ic/timer_cpcbus.c cpctim
Rename a cpc device.
2002-05-21 07:05:00 +04:00
device cpciic
attach cpciic at cpcbus with iic_cpcbus
Add stuff for the CPC700.
2002-05-21 07:01:02 +04:00
file dev/ic/iic_cpcbus.c iic_cpcbus
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# Attributes used by the ISDN subsystem
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
define isdndev # the ISDN subsystem
Wrap long lines.
2001-09-13 09:19:53 +04:00
define passive_isdn # files needed by passive cards (XXX - protocol
# specific)
autoconf goop for iavc
2003-09-25 19:58:14 +04:00
define isdncapi # ISDN CAPI (http://www.capi.org/)
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
Fritz!PCI v2.0 ISDN driver from FreeBSD.
2002-10-26 01:03:47 +04:00
# The isac found on the Fritz V2.0 Card.
define nisacsx
file dev/ic/isacsx.c nisacsx needs-flag
# The 'standard' isac
define nisac
file dev/ic/isac.c nisac needs-flag
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# ISDN cards based on the Siemens ISAC/HSCX chipset (or lookalikes)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Fritz!PCI v2.0 ISDN driver from FreeBSD.
2002-10-26 01:03:47 +04:00
device isic: isdndev, passive_isdn, nisac
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/isic.c isic
Fritz!PCI v2.0 ISDN driver from FreeBSD.
2002-10-26 01:03:47 +04:00
file dev/ic/isic_l1.c isic|ifpci|ifritz
file dev/ic/isic_l1fsm.c isic|ifpci|ifritz
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/hscx.c isic
file dev/ic/isic_bchan.c isic
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# (old) Diehl active ISDN cards
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Disable daic(4). The driver is not finished. Ok'd by martin@.
2007-01-09 18:34:59 +03:00
#device daic: isdndev
#file dev/ic/daic.c daic
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
autoconf goop for iavc
2003-09-25 19:58:14 +04:00
# AWM B1/T1
# XXX: passive_isdn
device iavc: isdndev, isdncapi, passive_isdn
file dev/ic/iavc.c iavc
Last bit of the bwi driver From Urban Boquist
2009-01-09 22:58:17 +03:00
# Broadcom AirForce / Apple Airport Extreme
device bwi: arp, ifnet, firmload, wlan
file dev/ic/bwi.c bwi
add dme (dm9000 ethernet)
2010-09-09 02:55:54 +04:00
# DM9000 Ethernet controllers
#
device dme: arp, ether, ifnet
file dev/ic/dm9000.c dme
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# legitimate pseudo-devices
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
use new "defpseudodev" where appropriate, and remove dummy interface attribute definitions which were only to trick config(8)
2008-06-10 16:49:16 +04:00
defpseudodev vnd: disk
Add support for reading cloop2 compressed filesystem image, enable by putting VND_COMPRESSION into kernel config file. Written by Cliff Wright, polished up slightly by me.
2005-07-17 04:08:27 +04:00
defflag opt_vnd.h VND_COMPRESSION
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defpseudo ccd: disk
First step of random number subsystem rework described in <20111022023242.BA26F14A158@mail.netbsd.org>. This change includes the following: An initial cleanup and minor reorganization of the entropy pool code in sys/dev/rnd.c and sys/dev/rndpool.c. Several bugs are fixed. Some effort is made to accumulate entropy more quickly at boot time. A generic interface, "rndsink", is added, for stream generators to request that they be re-keyed with good quality entropy from the pool as soon as it is available. The arc4random()/arc4randbytes() implementation in libkern is adjusted to use the rndsink interface for rekeying, which helps address the problem of low-quality keys at boot time. An implementation of the FIPS 140-2 statistical tests for random number generator quality is provided (libkern/rngtest.c). This is based on Greg Rose's implementation from Qualcomm. A new random stream generator, nist_ctr_drbg, is provided. It is based on an implementation of the NIST SP800-90 CTR_DRBG by Henric Jungheim. This generator users AES in a modified counter mode to generate a backtracking-resistant random stream. An abstraction layer, "cprng", is provided for in-kernel consumers of randomness. The arc4random/arc4randbytes API is deprecated for in-kernel use. It is replaced by "cprng_strong". The current cprng_fast implementation wraps the existing arc4random implementation. The current cprng_strong implementation wraps the new CTR_DRBG implementation. Both interfaces are rekeyed from the entropy pool automatically at intervals justifiable from best current cryptographic practice. In some quick tests, cprng_fast() is about the same speed as the old arc4randbytes(), and cprng_strong() is about 20% faster than rnd_extract_data(). Performance is expected to improve. The AES code in src/crypto/rijndael is no longer an optional kernel component, as it is required by cprng_strong, which is not an optional kernel component. The entropy pool output is subjected to the rngtest tests at startup time; if it fails, the system will reboot. There is approximately a 3/10000 chance of a false positive from these tests. Entropy pool _input_ from hardware random numbers is subjected to the rngtest tests at attach time, as well as the FIPS continuous-output test, to detect bad or stuck hardware RNGs; if any are detected, they are detached, but the system continues to run. A problem with rndctl(8) is fixed -- datastructures with pointers in arrays are no longer passed to userspace (this was not a security problem, but rather a major issue for compat32). A new kernel will require a new rndctl. The sysctl kern.arandom() and kern.urandom() nodes are hooked up to the new generators, but the /dev/*random pseudodevices are not, yet. Manual pages for the new kernel interfaces are forthcoming.
2011-11-20 02:51:18 +04:00
defpseudodev cgd: disk, des, blowfish, cast128
use new "defpseudodev" where appropriate, and remove dummy interface attribute definitions which were only to trick config(8)
2008-06-10 16:49:16 +04:00
defpseudodev md: disk
Create fss(4) devices on first open and destroy on last close of an unconfigured device. That removes the compile-time constant number of useable devices. While here, add disk_busy()/disk_unbusy() instrumentation. Reviewed by: Quentin Garnier <cube@netbsd.org>
2008-09-14 20:10:19 +04:00
defpseudodev fss: disk
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 04:05:28 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defpseudo pty: tty
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 04:05:28 +04:00
defpseudo rnd
Include kern_ksyms if ksyms | ddb | lkm. Never include db_elf.c.
2003-04-25 00:04:03 +04:00
defpseudo ksyms
Introduce null console. This pseudo device acts as a normal console with the exception that it discards any output, and is useful for booting the kernel on headless boxes.
2003-10-17 22:16:42 +04:00
defpseudo nullcons
Add the 'lockstat' driver, which collects basic information about lock events.
2006-09-07 04:20:28 +04:00
defpseudo lockstat
Add bio(4) and associated bioctl(8) from OpenBSD, a driver control block device controllers, and more specifically raid controllers. Add a new sensor type, ENVSYS_DRIVE, to report drive status. From OpenBSD. Add bio and sysmon support to mfi(4). This allow userland to query status for drives and logical volumes attached to a mfi(4) controller. While there fix some debug printfs in mfi so they compile. Add bio(4) to amd64 and i386 GENERIC.
2007-05-01 21:18:52 +04:00
defpseudo bio: sysmon_envsys
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 04:05:28 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defpseudo loop: ifnet
defpseudo sl: ifnet
defpseudo ppp: ifnet, bpf_filter
defpseudo pppoe: ifnet, ether, sppp
defpseudo sppp: ifnet
defpseudo tun: ifnet
defpseudo vlan: ifnet, ether
defpseudo bridge: ifnet, ether
defpseudo bpfilter: ifnet, bpf_filter
defpseudo strip: ifnet
defpseudo gre: ifnet
defpseudo gif: ifnet
defpseudo faith: ifnet
Fix build for MPLS import: add options MPLS, changed pseudo-device mpls to pseudo-device ifmpls
2010-06-26 19:17:56 +04:00
defpseudo ifmpls: ifnet
Hook srt into the rest of the kernel build machinery, so it works to just uncomment the pseudo-device line (which arguably should go into other ports' GENERICs too, and at some point may). OKed by perry.
2007-01-11 08:36:29 +03:00
defpseudo srt: ifnet
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defpseudo stf: ifnet
Specify bpf_filter attribute only when the device uses the filter engine.
2010-01-19 19:24:44 +03:00
defpseudodev tap: ifnet, ether, arp
defpseudo carp: ifnet, ether, arp
defpseudodev etherip: ifnet, ether, arp
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 04:05:28 +04:00
defpseudo sequencer
Added the clockctl pseudodevice driver
2001-09-16 11:33:31 +04:00
defpseudo clockctl
Add MIDI support. The MIDI devices can be accessed as ``raw'' through the /dev/rmidiN devices, or with a sequencer interface via /dev/music. So far the only supported MIDI device is the MPU401 port on SoundBlaster (and only on SB on isapnp, since we do not have locators with multiple values yet).
1998-08-07 04:00:55 +04:00
Add accept filters, ported from FreeBSD by Coyote Point Systems. Add inetd support for specifying an accept filter for a service (mostly as a usage example, but it can be handy for other things). Manual pages to follow in a day or so. OK core@.
2008-08-04 07:55:47 +04:00
#
# Accept filters. XXX should use another registration/initialization method.
#
defpseudo accf_data
defpseudo accf_http
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# ISDN userland pseudo devices
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
defpseudo isdntrc: isdndev, tty
defpseudo isdnbchan: isdndev, tty
defpseudo isdntel: isdndev, tty
defpseudo isdnctl: isdndev, tty
defpseudo isdn: isdndev, tty
# ISDN network interfaces
defpseudo irip: isdndev, ifnet
Rename the IPR_VJ option into IRIP_VJ (as irip(4) told all the time), create an opt_ header and make the dependency on slcompress.c more exact. (OK by martin)
2003-04-11 18:45:27 +04:00
defflag opt_irip.h IRIP_VJ
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
defpseudo ippp: isdndev, sppp, ifnet
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
This is the "kttcp" network throughput testing pseudo-device. From the block comment at the top of the file: This module provides kernel support for testing network throughput from the perspective of the kernel. It is similar in spirit to the classic ttcp network benchmark program, the main difference being that with kttcp, the kernel is the source and sink of the data. Testing like this is useful for a few reasons: 1. This allows us to know what kind of performance we can expect from network applications that run in the kernel space, such as the NFS server or the NFS client. These applications don't have to move the data to/from userspace, and so benchmark programs which run in userspace don't give us an accurate model. 2. Since data received is just thrown away, the receiver is very fast. This can provide better exercise for the sender at the other end. 3. Since the NetBSD kernel currently uses a run-to-completion scheduling model, kttcp provides a benchmark model where preemption of the benchmark program is not an issue. There is a companion "kttcp" user program which uses the kttcp pseudo-device. Largely written by Frank van der Linden, with some modifications from me.
2002-06-29 03:27:13 +04:00
# KTTCP network throughput testing pseudo-device
defpseudo kttcp
file dev/kttcp.c kttcp needs-flag
deprecate the VERIFIED_EXEC option; now we only need the pseudo-device to enable it. while here, some config file tweaks. tons of input from cube@ (thanks!) and okay blymn@.
2006-07-22 14:34:26 +04:00
# Veriexec
Rototill of the verified exec functionality. * We now use hash tables instead of a list to store the in kernel fingerprints. * Fingerprint methods handling has been made more flexible, it is now even simpler to add new methods. * the loader no longer passes in magic numbers representing the fingerprint method so veriexecctl is not longer kernel specific. * fingerprint methods can be tailored out using options in the kernel config file. * more fingerprint methods added - rmd160, sha256/384/512 * veriexecctl can now report the fingerprint methods supported by the running kernel. * regularised the naming of some portions of veriexec.
2005-04-20 17:44:45 +04:00
defpseudo veriexec
Rename kern_verifiedexec.c to kern_veriexec.c. "Veriexec" is the name of the subsystem, not "Verifiedexec". The revisions of kern_verifiedexec.c are now in Attic/. No change between kern_verifiedexec.c and kern_veriexec.c. Also, update the man page accordingly. Okayed by christos@ and blymn@ some months ago.
2015-02-13 20:50:48 +03:00
file kern/kern_veriexec.c veriexec
Rename verified_exec.c -> veriexec.c. The old log is now in Attic/.
2015-12-09 21:25:32 +03:00
file dev/veriexec.c veriexec needs-flag
Added support for fingerprinted executables aka verified exec
2002-10-29 15:31:20 +03:00
add a "drvctl" pseudo-device as userland interface to the autoconf rescan() and detach() functions
2004-08-18 16:19:29 +04:00
# driver attach / detach user interface
defpseudo drvctl
Add DRVGETEVENT support for /dev/drvctl, based on devmon support by Jachym Holecek for Google Summer of Code. DRVGETEVENT plist is currently limited to event type, device name, and device parent name.
2008-05-25 16:30:40 +04:00
file kern/kern_drvctl.c drvctl needs-flag
add a "drvctl" pseudo-device as userland interface to the autoconf rescan() and detach() functions
2004-08-18 16:19:29 +04:00
Add cpuctl(8). For now this is not much more than a toy for debugging and benchmarking that allows taking CPUs online/offline.
2007-08-04 15:02:56 +04:00
# cpu control
defpseudo cpuctl
get the logics straight: CPU_UCODE requires "firmload" as a dependency
2012-01-19 00:37:20 +04:00
defflag CPU_UCODE: firmload
Add cpuctl(8). For now this is not much more than a toy for debugging and benchmarking that allows taking CPUs online/offline.
2007-08-04 15:02:56 +04:00
Part 2/n of extensive changes to request transport to/from userspace: Rip the transport code completely out of puffs and generalize it into an independent module which will be used for multiple purposes in the future. This module is called the Pass-to-Userspace Transporter (known as "putter" among friends). This is very much work-in-progress and one dependency with puffs remains: the request framing format. The device name is still /dev/puffs, but that will change soon. Users of puffs need the following in their kernel configs now: pseudo-device putter
2007-11-11 00:45:04 +03:00
# pass-to-userspace transporter
defpseudo putter
Move putter code from directly under dev/ to dev/putter/ no functional change
2007-11-12 17:30:55 +03:00
file dev/putter/putter.c putter
Part 2/n of extensive changes to request transport to/from userspace: Rip the transport code completely out of puffs and generalize it into an independent module which will be used for multiple purposes in the future. This module is called the Pass-to-Userspace Transporter (known as "putter" among friends). This is very much work-in-progress and one dependency with puffs remains: the request framing format. The device name is still /dev/puffs, but that will change soon. Users of puffs need the following in their kernel configs now: pseudo-device putter
2007-11-11 00:45:04 +03:00
pud (userspace char/block drivers) build goo
2007-11-20 21:54:31 +03:00
# userspace block/char device drivers
defpseudo pud
file dev/pud/pud.c pud
file dev/pud/pud_dev.c pud
Merge the haad-dm branch to -current. This branch adds LVM functionality to the base NetBSD system. It uses Linux LVM2 tools and our BSD licensed device-mapper driver. The device-mapper driver can be used to create virtual block devices which maps virtual blocks to real with target mapping called target. Currently these targets are available a linear, zero, error and a snapshot (this is work in progress and doesn't work yet). The lvm2tools adds lvm and dmsetup binary to based system, where the lvm tool is used to manage and administer whole LVM and the dmestup is used to communicate iwith device-mapper kernel driver. With these tools also a libdevmapper library is instaled to the base system. Building of tools and driver is currently disable and can be enabled with MKLVM=yes in mk.conf. I will add sets lists and rc.d script soon. Oked by agc@ and cube@.
2008-12-19 18:24:03 +03:00
# device-mapper driver for LVM
include "dev/dm/files.dm"
Cleanup how file system configuration information is declared, grouping related information together, with the file system code itself. This is just low-hanging fruit -- more to come.
2002-04-17 03:14:05 +04:00
#
# File systems
#
include "coda/files.coda"
ptyfs moved from miscfs/ to fs/ sort file system includes
2004-11-11 22:21:46 +03:00
include "fs/adosfs/files.adosfs"
include "fs/cd9660/files.cd9660"
Add read-only support for SGI's Extent File System. Reviewed by pooka@.
2007-06-30 03:30:16 +04:00
include "fs/efs/files.efs"
move filecorefs code from sys/filecorefs to sys/fs/filecorefs
2002-12-23 20:30:36 +03:00
include "fs/filecorefs/files.filecorefs"
Complete rename of hfsp to hfs, requested by thorpej.
2007-03-06 14:28:44 +03:00
include "fs/hfs/files.hfs"
ptyfs moved from miscfs/ to fs/ sort file system includes
2004-11-11 22:21:46 +03:00
include "fs/msdosfs/files.msdosfs"
Import read-only part of the NiLFS (v2) implementation for NetBSD. It has been tested with a DEBUG+DIAGNOSTIC+LOCKDEBUG kernel. To summerise NiLFS, i'll repeat my posting to tech-kern here: NiLFS stands for New implementation of Logging File System; LFS done right they claim :) It is at version 2 now and is being developed by NTT, the Japanese telecom company and recently put into the linux source tree. See http://www.nilfs.org. The on-disc format is not completely frozen and i expect at least one minor revision to come in time. The benefits of NiLFS are build-in fine-grained checkpointing, persistent snapshots, multiple mounts and very large file and media support. Every checkpoint can be transformed into a snapshot and v.v. It is said to perform very well on flash media since it is not overwriting pieces apart from a incidental update of the superblock, but that might change. It is accompanied by a cleaner to clean up the segments and recover lost space. My work is not a port of the linux code; its a new implementation. Porting the code would be more work since its very linux oriented and never written to be ported outside linux. The goal is to be fully interchangable. The code is non intrusive to other parts of the kernel. It is also very light-weight. The current state of the code is read-only access to both clean and dirty NiLFS partitions. On mounting a dirty partition it rolls forward the log to the last checkpoint. Full read-write support is however planned! Just as the linux code, mount_nilfs allows for the `head' to be mounted read/write and allows multiple read-only snapshots/checkpoint mounts next to it. By allowing the RW mount at a different snapshot for read-write it should be possible eventually to revert back to a previous state; i.e. try to upgrade a system and being able to revert to the exact state prior to the upgrade. Compared to other FS's its pretty light-weight, suitable for embedded use and on flash media. The read-only code is currently 17kb object code on NetBSD/i386. I doubt the read-write code will surpass the 50 or 60. Compared this to FFS being 156kb, UDF being 84 kb and NFS being 130kb. Run-time memory usage is most likely not very different from other uses though maybe a bit higher than FFS.
2009-07-18 20:31:41 +04:00
include "fs/nilfs/files.nilfs"
ptyfs moved from miscfs/ to fs/ sort file system includes
2004-11-11 22:21:46 +03:00
include "fs/ntfs/files.ntfs"
include "fs/ptyfs/files.ptyfs"
add fs/puffs
2006-10-23 02:44:44 +04:00
include "fs/puffs/files.puffs"
Initial import of a UDF file system implementation for NetBSD. Finally the logic glue and the set distribution lists modifications.
2006-02-02 18:26:32 +03:00
include "fs/udf/files.udf"
Cleanup how file system configuration information is declared, grouping related information together, with the file system code itself. This is just low-hanging fruit -- more to come.
2002-04-17 03:14:05 +04:00
include "fs/smbfs/files.smbfs"
Add preliminary support for System V Boot File System. Written by UCHIYAMA Yasushi <uch@netbsd>.
2005-12-29 17:53:45 +03:00
include "fs/sysvbfs/files.sysvbfs"
Initial addition of tmpfs, an efficient memory file-system. This project was developed as part of Google's Summer of Code 2005 program. This change adds the kernel code, the mount_tmpfs utility, a regression test suite and does all other related changes to integrate these. The file-system is still *experimental*. Therefore, it is disabled by default in all kernels. However, as typically done, a commented-out entry is added in them to ease its setup. Note that I haven't commited the required mountd(8) changes to be able to export tmpfs file-systems because NFS support is still very unstable and because, before enabling it, I'd like to do some other changes. OK'ed by my project mentor, William Studenmund (wrstuden@).
2005-09-10 23:20:48 +04:00
include "fs/tmpfs/files.tmpfs"
ptyfs moved from miscfs/ to fs/ sort file system includes
2004-11-11 22:21:46 +03:00
include "fs/union/files.union"
7th Edition(V7) File System support. and NetBSD symbolic-link, socket, FIFO extension. see newfs_v7fs(8).
2011-06-27 15:52:22 +04:00
include "fs/v7fs/files.v7fs"
Cleanup how file system configuration information is declared, grouping related information together, with the file system code itself. This is just low-hanging fruit -- more to come.
2002-04-17 03:14:05 +04:00
include "miscfs/fdesc/files.fdesc"
include "miscfs/kernfs/files.kernfs"
include "miscfs/nullfs/files.nullfs"
include "miscfs/overlay/files.overlay"
include "miscfs/procfs/files.procfs"
include "miscfs/umapfs/files.umapfs"
include "nfs/files.nfs"
include "ufs/files.ufs"
fix the ordering and make UVMHIST enable KERNHIST automatically.
2011-05-17 09:32:31 +04:00
#
# UVM (virtual memory)
#
include "uvm/files.uvm"
First take at security model abstraction. - Add a few scopes to the kernel: system, network, and machdep. - Add a few more actions/sub-actions (requests), and start using them as opposed to the KAUTH_GENERIC_ISSUSER place-holders. - Introduce a basic set of listeners that implement our "traditional" security model, called "bsd44". This is the default (and only) model we have at the moment. - Update all relevant documentation. - Add some code and docs to help folks who want to actually use this stuff: * There's a sample overlay model, sitting on-top of "bsd44", for fast experimenting with tweaking just a subset of an existing model. This is pretty cool because it's *really* straightforward to do stuff you had to use ugly hacks for until now... * And of course, documentation describing how to do the above for quick reference, including code samples. All of these changes were tested for regressions using a Python-based testsuite that will be (I hope) available soon via pkgsrc. Information about the tests, and how to write new ones, can be found on: http://kauth.linbsd.org/kauthwiki NOTE FOR DEVELOPERS: *PLEASE* don't add any code that does any of the following: - Uses a KAUTH_GENERIC_ISSUSER kauth(9) request, - Checks 'securelevel' directly, - Checks a uid/gid directly. (or if you feel you have to, contact me first) This is still work in progress; It's far from being done, but now it'll be a lot easier. Relevant mailing list threads: http://mail-index.netbsd.org/tech-security/2006/01/25/0011.html http://mail-index.netbsd.org/tech-security/2006/03/24/0001.html http://mail-index.netbsd.org/tech-security/2006/04/18/0000.html http://mail-index.netbsd.org/tech-security/2006/05/15/0000.html http://mail-index.netbsd.org/tech-security/2006/08/01/0000.html http://mail-index.netbsd.org/tech-security/2006/08/25/0000.html Many thanks to YAMAMOTO Takashi, Matt Thomas, and Christos Zoulas for help stablizing kauth(9). Full credit for the regression tests, making sure these changes didn't break anything, goes to Matt Fleming and Jaime Fournier. Happy birthday Randi! :)
2006-09-09 00:58:56 +04:00
#
# Security models
#
include "secmodel/files.secmodel"
Move kern definitions.
2014-10-12 08:30:42 +04:00
include "kern/files.kern"
Define i4b files in netisdn/files.i4b.
2010-03-02 16:27:27 +03:00
Move dev/ definitions out of files.kern.
2015-08-21 05:18:18 +03:00
include "dev/files.dev"
Move net definitions.
2014-10-12 07:56:18 +04:00
include "net/files.net"
Reduce the massive code duplication regarding joy(4). Split it into MI and MD parts, and make ISA/ISAPNP/PCI joy(4) attachments MI.
2002-02-02 21:37:38 +03:00
# Game adapter (joystick)
device joy
file dev/ic/joy.c joy needs-flag
New Feature: add pseudo device for IEEE 1394 isochronous stream and isochronous reception routine for IEEE 1394 OHCI (fwohci). The transmission part is under construction. The minimum configuration options for this feature are: # IEEE 1394 (i.LINK) fwohci* at pci? dev ? function ? pseudo-device fwiso 1
2002-12-04 03:28:39 +03:00
Add the plumbing so one could compile filemon(4) into a kernel.
2011-10-15 04:23:08 +04:00
# process monitor for make(1)
# normally built as module
defpseudo filemon
file dev/filemon/filemon.c filemon
file dev/filemon/filemon_wrapper.c filemon
Add gpio files and majors.
2005-09-27 06:41:10 +04:00
#
# General Purpose Input/Output framework
#
Dallas Semiconductor 1-Wire bus support, from OpenBSD. Currently includes gpioow(4), attaching a bit-banging driver via a GPIO pin. Also, owtemp(4) which supports some of the 1-Wire temperature sensors, including the DS18b20 and DS1920 - temperatures are returned via the envsys(4) framework. Original drivers by Alexander Yurchenko (grange@openbsd), with envsys(4) support and a fix to the 1-wire search algorithm (for discovering devices on the bus) by me. As discussed on tech-kern earlier this week.
2006-04-07 22:55:21 +04:00
define onewire_bitbang
Add gpio files and majors.
2005-09-27 06:41:10 +04:00
include "dev/gpio/files.gpio"
Dallas Semiconductor 1-Wire bus support, from OpenBSD. Currently includes gpioow(4), attaching a bit-banging driver via a GPIO pin. Also, owtemp(4) which supports some of the 1-Wire temperature sensors, including the DS18b20 and DS1920 - temperatures are returned via the envsys(4) framework. Original drivers by Alexander Yurchenko (grange@openbsd), with envsys(4) support and a fix to the 1-wire search algorithm (for discovering devices on the bus) by me. As discussed on tech-kern earlier this week.
2006-04-07 22:55:21 +04:00
include "dev/onewire/files.onewire"
Add pseudo audio device driver. With this pseudo-device, audio played back via the standard audio interfaces is redirected back to userland as raw PCM data on /dev/padN. One example usage is to stream audio to an AirTunes compatible device using rtunes (http://www.nazgul.ch/dev_rtunes.html), ie: $ rtunes - < /dev/pad0 $ mpg123 -a /dev/sound1 blah.mp3 Another option is to capture audio output from eg. Real Player, by simply instructing Real Player to output to /dev/sound1, and running: $ cat /dev/pad0 > blah.pcm
2007-11-11 20:37:45 +03:00
#
# Pseudo audio device
#
include "dev/pad/files.pad"
Add glue for x86emu and build it as part of i386/ALL.
2007-12-13 20:25:19 +03:00
#
# Intel 386 Real Mode emulator
#
include "lib/libx86emu/files.x86emu"
a simple performance monitor based profiler, inspired from linux oprofile.
2008-01-02 00:28:37 +03:00
#
# "tprof" profiler.
#
include "dev/tprof/files.tprof"
Add 'alternative memory' disk device driver.
2009-03-12 03:15:07 +03:00
#
# alternate memory device
#
include "dev/altmem/files.altmem"
Import the Flash and NAND subsytem code contributed by the University of Szeged, Hungary. The commit includes: - Flash layer, which gives a common API to access flash devices - NAND controller subsystem for the flash layer - An example OMAP driver which is used on BeagleBoard or alike ARM boards
2011-02-26 21:07:13 +03:00
#
# Flash subsystem
#
include "dev/flash/files.flash"
#
# NAND subsytem
#
include "dev/nand/files.nand"
Add support for CFI NOR, using MPC8536DS as initial example. Only AMD/Fujitsu command set is suported so far. This is still work in progress, be advised.
2011-07-15 23:19:55 +04:00
#
# NOR subsytem
#
include "dev/nor/files.nor"
Build and install new in-kernel iscsi initiator kernel module and associated binaries (iscsid, iscsictl) if MKISCSI != no. Initiator can also be built into a kernel by adding 'pseudo-device iscsi' in kernel configuration.
2011-11-15 20:50:43 +04:00
#
# iscsi
#
include "dev/iscsi/files.iscsi"
patches for new wifi devices.
2013-03-30 06:38:58 +04:00
Move athn definitions.
2014-10-10 16:39:53 +04:00
#
# athn
#
include "dev/ic/files.athn"
Add basic clock device infrastructure.
2015-12-05 16:31:07 +03:00
#
# MI clk api
#
include "dev/clk/files.clk"
Reference in New Issue Copy Permalink