Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
175d40d2ca
NetBSD/sys/conf/files

1408 lines
33 KiB
Plaintext
Raw Normal View History

integrate kauth.
2006-05-15 01:19:33 +04:00
# $NetBSD: files,v 1.773 2006/05/14 21:25:21 elad Exp $
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# @(#)files.newconf 7.5 (Berkeley) 5/10/93
Move netinet, netinet6, ipsec, and ipfilter config defns to netinet/files.ipfilter, etinet/files.netinet, netinet6/files.netinet6, and netinet6/files.netipsec. XXX There are still a few stragglers in conf/files, which are entangled with other network protocols.
2002-10-11 02:45:45 +04:00
#
# device classes
#
devclass disk
devclass tape
devclass ifnet
devclass tty
Make KMEMSTATS a "header option".
1997-02-03 00:16:25 +03:00
# options understood by the machine-independent part of the kernel
# (note, these are case-sensitive)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag INSECURE
Add MBUFTRACE kernel option. Do a little mbuf rework while here. Change all uses of MGET*(*, M_WAIT, *) to m_get*(M_WAIT, *). These are not performance critical and making them call m_get saves considerable space. Add m_clget analogue of MCLGET and make corresponding change for M_WAIT uses. Modify netinet, gem, fxp, tulip, nfs to support MBUFTRACE. Begin to change netstat to use sysctl.
2003-02-26 09:31:08 +03:00
defflag MBUFTRACE
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag KMEMSTATS
Make kernel continuations optional for now.
2004-03-29 02:43:56 +04:00
defflag KCONT
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag KTRACE
systrace support.
2002-06-17 20:24:57 +04:00
defflag SYSTRACE
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam MAXUPRC
defparam RTC_OFFSET
defparam HZ.
2004-07-01 16:44:26 +04:00
defparam HZ
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam DEFCORENAME
use opt_pipe.h for PIPE_SOCKETPAIR, add PIPE_NODIRECT there too
2002-02-11 21:03:00 +03:00
defflag opt_pipe.h PIPE_SOCKETPAIR PIPE_NODIRECT
Generate dependencies for the TCP_SENDSPACE and TCP_RECVSPACE options.
1997-07-29 02:31:08 +04:00
- defflag bufq_fcfs and bufq_disksort. - make them on by default.
2005-09-26 18:14:26 +04:00
defflag BUFQ_DISKSORT
defflag BUFQ_FCFS
lookup bufq using link_set rather than a switch statement.
2004-11-25 07:52:23 +03:00
defflag BUFQ_PRIOCSCAN
defflag BUFQ_READPRIO
defflag NEW_BUFQ_STRATEGY # same as BUFQ_READPRIO
Add option NEW_BUFQ_STRATEGY, a new buffer queue strategy for better system responsiness under high disk I/O load. OK'ed by Juergen Hannken-Illjes.
2002-10-18 18:31:10 +04:00
defparam SOMAXKVA.
2003-07-03 05:42:10 +04:00
defparam SOMAXKVA
Add some experimental page-loaning for writes on sockets. It is disabled by default, and can be enabled by adding the SOSEND_LOAN option to your kernel config. The SOSEND_COUNTERS option can be used to provide some instrumentation. Use of this option, combined with an application that does large enough writes, gets us zero-copy on the TCP and UDP transmit path.
2002-05-02 21:55:48 +04:00
defflag opt_sock_counters.h SOSEND_COUNTERS
Make use of page loaning for large socket writes the default. The SOSEND_NO_LOAN option can be used to go back to the old behavior.
2002-08-21 09:13:36 +04:00
defflag opt_sosend_loan.h SOSEND_NO_LOAN
Add some experimental page-loaning for writes on sockets. It is disabled by default, and can be enabled by adding the SOSEND_LOAN option to your kernel config. The SOSEND_COUNTERS option can be used to provide some instrumentation. Use of this option, combined with an application that does large enough writes, gets us zero-copy on the TCP and UDP transmit path.
2002-05-02 21:55:48 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag MULTIPROCESSOR
defopt MULTIPROCESSOR.
1998-09-24 07:55:15 +04:00
Provide hooks to include the config file(s) in the kernel binary.
2001-12-17 18:40:43 +03:00
defflag opt_config.h INCLUDE_CONFIG_FILE INCLUDE_JUST_CONFIG
Add a kern.dump_on_panic sysctl variable (and documentation, and a kernel config option) that controls whether the kernel dumps to the dump device on panic. Dumps can still be forced via the ``sync'' command from ddb. Defaults to ``on''.
2003-02-10 03:35:15 +03:00
defparam opt_dump.h DUMP_ON_PANIC
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_callout.h CALLWHEEL_STATS
Defopt CALLWHEEL_STATS.
2001-09-13 09:22:16 +04:00
add support for p1003.1b semaphores. From FreeBSD.
2003-01-20 23:02:01 +03:00
defflag opt_posix.h P1003_1B_SEMAPHORE
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_sysv.h SYSVMSG SYSVSEM SYSVSHM
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
defparam opt_sysvparam.h SHMMAXPGS SEMMNI SEMMNS SEMUME SEMMNU
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-20 02:14:54 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_ntp.h PPS_SYNC NTP
defopt NTP and PPS_SYNC, in preparation for adding PPS support.
1998-04-22 11:08:11 +04:00
Update to the split pty driver.
2004-11-10 20:26:16 +03:00
defflag opt_ptm.h NO_DEV_PTM COMPAT_BSDPTY
ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM
2004-06-18 19:02:29 +04:00
Correct NKMEMPAGES_MIN option name.
2005-01-13 23:16:02 +03:00
defparam opt_kmempages.h NKMEMPAGES NKMEMPAGES_MIN NKMEMPAGES_MAX
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_malloclog.h MALLOCLOG
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
defparam opt_malloclog.h MALLOCLOGSIZE
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_malloc_debug.h MALLOC_DEBUG
defflag opt_pool.h POOL_DIAGNOSTIC
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
defparam opt_poollog.h POOL_LOGSIZE
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_revcache.h NAMECACHE_ENTER_REVERSE
defopt NAMECACHE_ENTER_REVERSE
2001-03-30 02:40:06 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_execfmt.h EXEC_AOUT EXEC_COFF EXEC_ECOFF EXEC_ELF32
EXEC_ELF64 EXEC_MACHO EXEC_SCRIPT
rename EXEC_ELF_CATCHALL to EXEC_ELF_NOTELESS
2002-03-23 12:40:55 +03:00
EXEC_ELF_NOTELESS
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
Work-in-progress implementation of "wedges", a new way to represent partitions in the NetBSD kernel. See discussion on tech-kern for details.
2004-09-25 07:30:44 +04:00
defflag opt_dkwedge.h DKWEDGE_AUTODISCOVER
Add a parsing module for 4.4BSD/NetBSD disklabels. This module supports disklabels nested inside an MBR "NetBSD" or "386BSD" partition (first one found is considered authoritative for the disk), or in one of several known locations for various NetBSD platforms. It can read native or other- endian disklabels (code is there, but not tested). If you want to play with this, exercise caution; you can't currently mountroot on a wedge (setroot() needs some work). Enabled by the DKWEDGE_METHOD_BSDLABEL kernel option.
2004-10-04 05:16:39 +04:00
DKWEDGE_METHOD_BSDLABEL
Break out the wedge discovery methods into true modules, and add some infrastructure that allows new ones to be added. The discovery methods are prioritized, and only one can exist at a given priority. The DKWEDGE_METHOD_GPT option causes GPT support to be included. GPT is at priority 0; we prefer GPT above all others.
2004-10-01 09:16:04 +04:00
DKWEDGE_METHOD_GPT
MBR partition table support for wedges, enabled by the DKWEDGE_METHOD_MBR option.
2004-10-23 21:25:14 +04:00
DKWEDGE_METHOD_MBR
Work-in-progress implementation of "wedges", a new way to represent partitions in the NetBSD kernel. See discussion on tech-kern for details.
2004-09-25 07:30:44 +04:00
Defopt VERIFIED_EXEC*
2005-07-17 02:50:15 +04:00
defflag opt_verified_exec.h VERIFIED_EXEC
VERIFIED_EXEC_FP_SHA1
VERIFIED_EXEC_FP_SHA256
VERIFIED_EXEC_FP_SHA384
VERIFIED_EXEC_FP_SHA512
VERIFIED_EXEC_FP_MD5
VERIFIED_EXEC_FP_RMD160
defopt COMPAT_FREEBSD
1998-06-26 02:49:18 +04:00
# compatibility options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
add compat_ossaudio
2003-01-19 01:34:23 +03:00
defflag COMPAT_OSSAUDIO
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag COMPAT_FREEBSD
defflag COMPAT_HPUX
defflag COMPAT_IBCS2
defflag COMPAT_IRIX
defflag COMPAT_LINUX
Add initial (but unfinished) COMPAT_LINUX32 for amd64. This is good enough so that the i386 license manager part of amd64 version of Fluent works. While I'm here, add SysV IPC to COMPAT_LINUX/amd64
2006-02-09 22:18:56 +03:00
defflag COMPAT_LINUX32
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag COMPAT_OSF1
defflag COMPAT_SUNOS
defflag opt_compat_svr4.h COMPAT_SVR4 COMPAT_SVR4_32 SVR4_COMPAT_SOLARIS2
defflag COMPAT_ULTRIX
defflag COMPAT_NETBSD32
defflag COMPAT_AOUT_M68K
defflag COMPAT_M68K4K
defflag COMPAT_MACH
The kernel now builds with COMPAT_DARWIN.
2002-11-13 02:40:19 +03:00
defflag COMPAT_DARWIN
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag COMPAT_VAX1K
defflag COMPAT_43
defflag COMPAT_PECOFF
64 bit inode changes.
2005-08-19 06:03:49 +04:00
defflag opt_compat_netbsd.h COMPAT_30
defflag opt_compat_netbsd.h COMPAT_20: COMPAT_30
defopt COMPAT_20
2004-04-21 16:44:13 +04:00
defflag opt_compat_netbsd.h COMPAT_16: COMPAT_20
Make COMPAT_xx imply all later COMPAT_yy. (COMPAT_09 implies all whereas COMPAT_14 just implies COMPAT_1[56]). This means COMPAT_xy implies NetBSD compatibility for NetBSD x.y OR LATER.
2003-09-22 21:26:14 +04:00
defflag opt_compat_netbsd.h COMPAT_15: COMPAT_16
defflag opt_compat_netbsd.h COMPAT_14: COMPAT_15
defflag opt_compat_netbsd.h COMPAT_13: COMPAT_14
defflag opt_compat_netbsd.h COMPAT_12: COMPAT_13
defflag opt_compat_netbsd.h COMPAT_11: COMPAT_12
defflag opt_compat_netbsd.h COMPAT_10: COMPAT_11
defflag opt_compat_netbsd.h COMPAT_09: COMPAT_10
defflag opt_compat_netbsd.h COMPAT_NOMID
defopt NATM.
1998-07-06 02:48:05 +04:00
* Move config defns for the crypto algorithms into their own files. Define an attribute for each crypto algorithm, and use that attribute to select the files that implement the algorithm. * Give the "wlan" attribute a dependency on the "arc4" attribute. * Give the "cgd" pseudo-device the "des", "blowfish", "cast128", and "rijndael" attributes. * Use the new attribute-as-option-dependencies feature of config(8) to give the IPSEC_ESP option dependencies on the "des", "blowfish", "cast128", and "rijndael" attributes.
2002-10-11 05:52:04 +04:00
#
# Cryptography support. Include this early, since several things
# use it.
Clean up dependencies between opencrypto framework and sys/crypto, by making the sys/crypto transforms depend on (per-transform-config-keyword|opencrypto) Thanks to Martin Husemann for double-checking the changes.
2003-07-29 01:28:23 +04:00
# Individual crypto transforms
* Move config defns for the crypto algorithms into their own files. Define an attribute for each crypto algorithm, and use that attribute to select the files that implement the algorithm. * Give the "wlan" attribute a dependency on the "arc4" attribute. * Give the "cgd" pseudo-device the "des", "blowfish", "cast128", and "rijndael" attributes. * Use the new attribute-as-option-dependencies feature of config(8) to give the IPSEC_ESP option dependencies on the "des", "blowfish", "cast128", and "rijndael" attributes.
2002-10-11 05:52:04 +04:00
include "crypto/arc4/files.arc4"
include "crypto/des/files.des"
include "crypto/blowfish/files.blowfish"
include "crypto/cast128/files.cast128"
include "crypto/rijndael/files.rijndael"
add AH/ESP algorithms: hmac-ripemd160 (AH), AES XCBC MAC (AH), AES counter mode (ESP)
2003-07-25 14:00:49 +04:00
include "crypto/ripemd160/files.ripemd160"
add hmac-sha2 support. various cleanups (like avoid hardcoding '16'). from kame
2003-07-22 07:24:23 +04:00
include "crypto/sha2/files.sha2"
Oops. I missed this file in my previous commit. Add inclusion of "files.skipjack" now that Skipjack has been moved from sys/opencrypto to crypto/skipjack.
2003-11-16 15:10:41 +03:00
include "crypto/skipjack/files.skipjack"
* Move config defns for the crypto algorithms into their own files. Define an attribute for each crypto algorithm, and use that attribute to select the files that implement the algorithm. * Give the "wlan" attribute a dependency on the "arc4" attribute. * Give the "cgd" pseudo-device the "des", "blowfish", "cast128", and "rijndael" attributes. * Use the new attribute-as-option-dependencies feature of config(8) to give the IPSEC_ESP option dependencies on the "des", "blowfish", "cast128", and "rijndael" attributes.
2002-10-11 05:52:04 +04:00
Make opencrypto explicitly depend on the "des" attribute. Also pull in zlib.c explicitly if opencrypto is included.
2003-08-24 23:19:54 +04:00
# General-purpose crypto processing framework.
include "opencrypto/files.opencrypto"
Include sysmon earlier.
2003-07-21 09:35:49 +04:00
#
# System monitoring framework
#
include "dev/sysmon/files.sysmon"
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Oops, missed include in the last.
2002-10-11 02:12:53 +04:00
# Networking protocols
#
Move 802.11-specific files to files.net80211
2005-11-28 00:14:26 +03:00
include "net80211/files.net80211"
Oops, missed include in the last.
2002-10-11 02:12:53 +04:00
include "netatalk/files.netatalk"
Move netccitt config defns to netccitt/files.netccitt.
2002-10-11 02:17:59 +04:00
include "netccitt/files.netccitt"
Move netinet, netinet6, ipsec, and ipfilter config defns to netinet/files.ipfilter, etinet/files.netinet, netinet6/files.netinet6, and netinet6/files.netipsec. XXX There are still a few stragglers in conf/files, which are entangled with other network protocols.
2002-10-11 02:45:45 +04:00
include "netinet/files.netinet"
include "netinet/files.ipfilter"
include "netinet6/files.netinet6"
merge netipsec/key* into netkey/key*. no need for both. change confusing filename
2003-09-12 15:20:57 +04:00
include "netinet6/files.ipsec"
include "netipsec/files.netipsec"
Move netiso config defns to netiso/files.netiso.
2002-10-11 02:56:03 +04:00
include "netiso/files.netiso"
Move netnatm config defns to netnatm/files.netnatm.
2002-10-11 02:58:49 +04:00
include "netnatm/files.netnatm"
Move netns config defns to netns/files.netns.
2002-10-11 03:04:33 +04:00
include "netns/files.netns"
need to include netsmb/files.netsmb
2003-02-18 15:20:19 +03:00
include "netsmb/files.netsmb"
PF from openbsd 3.5. missing features: - pfsync (due to protocol # assignment issues) - carp (not really a PF portion, but thought important to mention) - PF and ALTQ are mutually-exclusive. this will be sorted out when kjc@csl.sony.co.jp updates ALTQ and PF (and API inbetween) reviewed by matt, christos, perry torture-test is very welcomed.
2004-06-22 18:17:07 +04:00
include "net/files.pf"
Oops, missed include in the last.
2002-10-11 02:12:53 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag IPX # IPX network stack
defflag PFIL_HOOKS # pfil(9)
Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC. Let brconfig tell whether the bridge is using the ipfilter hook, or not.
2003-02-27 22:22:36 +03:00
defflag opt_bridge_ipf.h BRIDGE_IPF # bridge(4) use inet_pfil_hooks
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_ppp.h PPP_DEFLATE PPP_BSDCOMP PPP_FILTER
# Include deflate or bsd
# compression, enable pppd
# packet filtering support
defopt INET, NETATALK.
1998-07-05 04:51:04 +04:00
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
# networking options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag GATEWAY
defparam NMBCLUSTERS.
2005-12-21 13:57:22 +03:00
defparam opt_nmbclusters.h NMBCLUSTERS
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam SB_MAX
defopt SB_MAX, which controls the maximum allowable size of socket buffers
1999-02-09 05:15:45 +03:00
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
# file system options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Cleanup how file system configuration information is declared, grouping related information together, with the file system code itself. This is just low-hanging fruit -- more to come.
2002-04-17 03:14:05 +04:00
defflag SOFTDEP # XXX files.ufs?
defflag QUOTA # XXX files.ufs?
Add a new VNODE_LOCKDEBUG option, which enables checks in the VOP_*() calls to ensure that the vnode lock state is as expected when the VOP call is made. Modify vnode_if.src to set the expected state according to the documenting lock table for each VOP. Modify vnode_if.sh to emit the checks. Notes: - The checks are only performed if the vnode has the VLOCKSWORK bit set. Some file systems (e.g. specfs) don't even bother with vnode locks, so of course the checks will fail. - We can't actually run with VNODE_LOCKDEBUG because there are so many vnode locking problems, not the least of which is the "use SHARED for VOP_READ()" issue, which screws things up for the entire call chain. Inspired by similar changes in OpenBSD, but implemented differently.
2004-09-21 07:10:35 +04:00
defflag VNODE_LOCKDEBUG
convert "magiclinks" from a per-fs mount option to a system-wide sysctl. as discussed on tech-kern quite some time ago.
2006-02-12 04:32:06 +03:00
defflag MAGICLINKS
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
defopt BUFCACHE and BUFPAGES.
1999-02-27 09:39:34 +03:00
# buffer cache size options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam opt_bufcache.h BUFCACHE BUFPAGES
defopt BUFCACHE and BUFPAGES.
1999-02-27 09:39:34 +03:00
In-kernel device configuration manager - allows modification of device locators at run-time. Written by Mats O Jansson <moj@stacken.kth.se>. Reworked by Jun-ichiro itojun Hagino <itojun@netbsd.org>.
2001-07-01 06:56:20 +04:00
# userconf
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag USERCONF
In-kernel device configuration manager - allows modification of device locators at run-time. Written by Mats O Jansson <moj@stacken.kth.se>. Reworked by Jun-ichiro itojun Hagino <itojun@netbsd.org>.
2001-07-01 06:56:20 +04:00
Create opt_sysctl.h which will hold sysctl related options. I suspect most of these won't be used (well, the description related one will be), but it's good to formalize things.
2004-04-08 07:43:38 +04:00
# sysctl related
#
defflag opt_sysctl.h SYSCTL_DISALLOW_CREATE SYSCTL_DISALLOW_KWRITE
SYSCTL_DEBUG_SETUP SYSCTL_DEBUG_CREATE
s/SYSCTL_USE_DESCR/SYSCTL_INCLUDE_DESCR/g since the latter name seems more popular. Or at least, less unpopular.
2004-04-09 23:01:38 +04:00
SYSCTL_INCLUDE_DESCR
Create opt_sysctl.h which will hold sysctl related options. I suspect most of these won't be used (well, the description related one will be), but it's good to formalize things.
2004-04-08 07:43:38 +04:00
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- add kern_allocsys.c - move a comment around
1999-05-20 10:01:16 +04:00
# Not entirely MI, but present on multiple arch's
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- add kern_allocsys.c - move a comment around
1999-05-20 10:01:16 +04:00
defopt BUFCACHE and BUFPAGES.
1999-02-27 09:39:34 +03:00
# PC-style MBR handling
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_mbr.h COMPAT_386BSD_MBRPART
defopt COMPAT_386BSD_MBRPART into opt_mbr.h
1998-06-23 01:12:51 +04:00
Move DDB files to files.ddb XXX couple of kgdb references -- clean up later
2005-11-28 01:44:35 +03:00
#
defopt DDB.
1998-07-05 02:18:13 +04:00
# debugging options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move DDB files to files.ddb XXX couple of kgdb references -- clean up later
2005-11-28 01:44:35 +03:00
include "ddb/files.ddb" # in-kernel dynamic debugger
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_kgdb.h KGDB
Add KGDB_DEVPORT, for machines where KGDB_DEVADDR describes (for example) a dual uart and we need a port discriminator to decide where to attach kgdb.
2003-05-27 01:11:04 +04:00
defparam opt_kgdb.h KGDB_DEV KGDB_DEVNAME KGDB_DEVPORT
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
defflag LOCKDEBUG
defflag SYSCALL_DEBUG
add KSTACK_CHECK_MAGIC. discussed on tech-kern.
2002-07-03 00:27:44 +04:00
defflag opt_kstack.h KSTACK_CHECK_MAGIC
defopt DDB.
1998-07-05 02:18:13 +04:00
defopt MEMORY_DISK_{HOOKS,SERVER,IS_ROOT}.
1999-02-07 12:34:58 +03:00
# memory (ram) disk options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_md.h MEMORY_DISK_HOOKS MEMORY_DISK_IS_ROOT
MEMORY_DISK_DYNAMIC
Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE, which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as being more consistent with what it's controlling...
2002-04-02 09:30:34 +04:00
defparam opt_md.h MEMORY_DISK_SERVER MEMORY_DISK_ROOT_SIZE
Allow "the forcing of root on md0a to single user" to be overriden by using options MEMORY_RBFLAGS=0 (XXX forcing to single user needs to die).
2003-02-04 02:02:42 +03:00
MEMORY_RBFLAGS
defopt MINIROOTSIZE
1999-03-17 21:59:21 +03:00
Implement pmc(9) -- An interface to hardware performance monitoring counters. These counters do not exist on all CPUs, but where they do exist, can be used for counting events such as dcache misses that would otherwise be difficult or impossible to instrument by code inspection or hardware simulation. pmc(9) is meant to be a general interface. Initially, the Intel XScale counters are the only ones supported.
2002-08-07 09:14:47 +04:00
# Support for hardware performance monitoring counters
#
defflag opt_perfctrs.h PERFCTRS
Add some framework for MI assignment of device majors - add sys/dev/majors which is automatically included during kernel config, and add comments to individual machine-dependant majors.* files to assign new MI majors in MI file. Range 0-191 is reserved for machine-specific assignments, range 192+ are MI assignments. Follows recent discussion on tech-kern@
2003-10-05 12:04:24 +04:00
# Machine-independant device majors assignements
move MI majors config file from sys/dev/majors to sys/conf/majors
2003-10-11 01:26:38 +04:00
include "conf/majors"
Add some framework for MI assignment of device majors - add sys/dev/majors which is automatically included during kernel config, and add comments to individual machine-dependant majors.* files to assign new MI majors in MI file. Range 0-191 is reserved for machine-specific assignments, range 192+ are MI assignments. Follows recent discussion on tech-kern@
2003-10-05 12:04:24 +04:00
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# generic attributes
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename the audio "bus" attribute audiobus to avoid confusion with audio device.
2002-04-22 13:41:19 +04:00
define audiobus { }
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
define midibus { }
Add a layer to handle emulation of MIDI for synthesizers. It handles decoding of MIDI commands, voice allocation, and translation it notes to frequencies.
1998-08-12 22:14:01 +04:00
define midisyn
Following Matt Thomas's request, rename ata attribute to ata_hl, and wdc_base to ata. We can now have atabus* at ata? in kernel config files.
2003-10-09 00:57:59 +04:00
define ata {[channel = -1]}
Add common routines for SATA controllers. Right now, we have sata_speed(), which reports the speed encoded in the SStatus register.
2004-05-29 03:26:27 +04:00
define sata
Define a "scsi_core" attribute. Make the "scsi" attribute depend on "scsi_core". Make all the files previously selected by the "scsi" attribute selected by the "scsi_core" attribute. Give the "scsibus" device the "scsi_core" attribute.
2002-10-10 00:23:56 +04:00
define scsi_core
define scsi {[channel = -1]}: scsi_core
Following Matt Thomas's request, rename ata attribute to ata_hl, and wdc_base to ata. We can now have atabus* at ata? in kernel config files.
2003-10-09 00:57:59 +04:00
define ata_hl {[drive = -1]}
Make the ATA mid-layer appears as atabus, as proposed in http://mail-index.netbsd.org/tech-kern/2003/09/25/0006.html This adds a device (atabus) between IDE controllers and wd or atapibus, to have each ATA channel show up in the device tree. Later there will be atabus devices in /dev, so that we can do IOCTL on them. Each atabus has its own kernel thread, to handle operations that needs polling, e.g. reset and others. Device probing on each bus it defered to the atabus thread creation. This allows to do the reset and basic device probes in parallel, which reduce boot time on systems with several pciide controllers.
2003-10-08 14:58:12 +04:00
define atapi { }
"attach radio at radio": using one word as both attribute and device doesn't work well, radio.c is pulled in even with no such device in the configuration, and the kernel doesn't link due to missing "radio_cd". So call the attribute "radiodev" to avoid confusion.
2002-01-07 20:44:42 +03:00
define radiodev { }
Add gpibdev attribute
2003-06-02 08:12:07 +04:00
define gpibdev {[address = -1]}
Add gpio files and majors.
2005-09-27 06:41:10 +04:00
define gpiobus { }
Dallas Semiconductor 1-Wire bus support, from OpenBSD. Currently includes gpioow(4), attaching a bit-banging driver via a GPIO pin. Also, owtemp(4) which supports some of the 1-Wire temperature sensors, including the DS18b20 and DS1920 - temperatures are returned via the envsys(4) framework. Original drivers by Alexander Yurchenko (grange@openbsd), with envsys(4) support and a fix to the 1-wire search algorithm (for discovering devices on the bus) by me. As discussed on tech-kern earlier this week.
2006-04-07 22:55:21 +04:00
define onewirebus { }
Add pckbport attribute, and apply it to pckbc. Somehow I missed this file in the main commit of pckbport. *blush*
2004-03-14 01:45:23 +03:00
define pckbport {[slot = -1]}
define pckbport_machdep_cnattach
Conditionalize firmload.c on the firmload attribute.
2006-01-17 09:52:43 +03:00
define firmload
Some changes from Matt Thomas, to help support FDDI: add 'fddi' attribute, and files descriptions for it. XXX add 'pdq' attribute, and add files descriptions for it. This is to XXX support the various front-ends that use his driver (which will eventually XXX live on PCI, EISA, and TC busses at least). This is probably not the best XXX way to arrange this, but i can't think of a better way without whacking XXX a lot of things.
1995-08-19 04:49:15 +04:00
# audio device attributes
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
GUS audio driver from John Kohl.
1995-07-19 23:58:09 +04:00
define mulaw
Audio changes: - Change the way attach and open works to allow multiple audio devices. - Split the mulaw.c file into two to avoid dragging in mulaw convertsion when they are not needed. Add 16 bit alaw/mulaw tables. - Change the way audio properties are gotten. - Recognize more versions os SoundBlaster.
1997-08-01 02:33:08 +04:00
define auconv
Add aurateconv attribute.
2002-03-10 00:21:57 +03:00
define aurateconv
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
Add MIDI support. The MIDI devices can be accessed as ``raw'' through the /dev/rmidiN devices, or with a sequencer interface via /dev/music. So far the only supported MIDI device is the MPU401 port on SoundBlaster (and only on SB on isapnp, since we do not have locators with multiple values yet).
1998-08-07 04:00:55 +04:00
# audio and midi devices, attaches to audio hardware driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device audio
Rename the audio "bus" attribute audiobus to avoid confusion with audio device.
2002-04-22 13:41:19 +04:00
attach audio at audiobus
Add MIDI support. The MIDI devices can be accessed as ``raw'' through the /dev/rmidiN devices, or with a sequencer interface via /dev/music. So far the only supported MIDI device is the MPU401 port on SoundBlaster (and only on SB on isapnp, since we do not have locators with multiple values yet).
1998-08-07 04:00:55 +04:00
device midi
attach midi at midibus
Change the MI audio driver so it attaches to the MD driver in the normal way. This requires adding a line to the config files to get audio to work again.
1997-08-20 03:49:33 +04:00
Simple code to provide a console bell through a generic audio device, for systems that don't have a dedicated feeper. It's up to MD code to enable this by having the "audiobell" attribute and calling audiobell() at the appropriate moment. Code for making noise in the kernel from Richard Earnshaw. Simple synthesizer design from the RISC OS Programmer's Reference manual.
2004-01-17 23:55:59 +03:00
# console bell via audio device
#
define audiobell
New generic I2C framework. Supports bit-bang and "intelligent" I2C interface controllers (of varying intelligence levels). Contributed by Wasabi Systems, Inc. Primarily written by Steve Woodford, with some modification by me.
2003-09-30 04:35:30 +04:00
# I2C device support
include "dev/i2c/files.i2c"
Move IR and Bluetooth config defns to their own files.
2002-10-11 01:52:28 +04:00
# IR device support
include "dev/ir/files.ir"
Add irbus (IrDA) and cir (Consumer Ir) and related file directives.
2001-12-02 13:41:52 +03:00
Move IR and Bluetooth config defns to their own files.
2002-10-11 01:52:28 +04:00
# Bluetooth device support
include "dev/bluetooth/files.bluetooth"
Add btbus, an attribute for Bluetooth.
2002-08-24 21:28:58 +04:00
cleanup old lpt(4) attachment, and glue ppbus in so that they can coexist: * lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c is included there too; dev/ic/lpt.c is not included if ppbus is configured or if there is alternative platform lpt (like for pc532) * g/c MD lpt definitions and custom puc/upc attachments, glue moved to conf/files and dev/pci/files.pci respectively; remove device lpt definition from dev/isa/files.isa * add ppbus parport attribute, atppc device attachments, adjust plip and lpt glue
2004-01-20 22:58:00 +03:00
# Parallel Port Bus support
include "dev/ppbus/files.ppbus"
Put the rasops attributes in conf/files so that everyone can run config(8) without pulling in files.rasops. There is prior art for this, e.g. audio.
2000-04-20 22:23:37 +04:00
# raster operations attributes
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
define rasops1
define rasops2
define rasops4
define rasops8
define rasops15
define rasops16
define rasops24
define rasops32
Put the rasops attributes in conf/files so that everyone can run config(8) without pulling in files.rasops. There is prior art for this, e.g. audio.
2000-04-20 22:23:37 +04:00
splash is MI; move it out of files.i386
2006-02-19 20:24:36 +03:00
# splash screen support
include "dev/splash/files.splash"
Add common videomode include. As requested by macallan@.
2006-04-07 05:39:13 +04:00
# videomode support
include "dev/videomode/files.videomode"
Some changes from Matt Thomas, to help support FDDI: add 'fddi' attribute, and files descriptions for it. XXX add 'pdq' attribute, and add files descriptions for it. This is to XXX support the various front-ends that use his driver (which will eventually XXX live on PCI, EISA, and TC busses at least). This is probably not the best XXX way to arrange this, but i can't think of a better way without whacking XXX a lot of things.
1995-08-19 04:49:15 +04:00
# net device attributes - we have generic code for arc(net), ether(net),
Add MI Econet support. This is lacking any interfaces to higher-layer protocols, and lacking any timeouts, but it basically works, doing four-way handshakes in both directions and incoming Machine Peek operations. Oh, and Econet is Acorn's ancient, proprietary 500kbit/s networking technology.
2001-09-11 03:11:05 +04:00
# fddi, token ring, atm and eco(net).
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
clean up the whitespace, and kill the 4BSD SCSI code comments
1995-08-17 22:50:34 +04:00
define arc
add atm networking stuff
1996-06-22 05:49:00 +04:00
define atm
Add MI Econet support. This is lacking any interfaces to higher-layer protocols, and lacking any timeouts, but it basically works, doing four-way handshakes in both directions and incoming Machine Peek operations. Oh, and Econet is Acorn's ancient, proprietary 500kbit/s networking technology.
2001-09-11 03:11:05 +04:00
define eco
Some changes from Matt Thomas, to help support FDDI: add 'fddi' attribute, and files descriptions for it. XXX add 'pdq' attribute, and add files descriptions for it. This is to XXX support the various front-ends that use his driver (which will eventually XXX live on PCI, EISA, and TC busses at least). This is probably not the best XXX way to arrange this, but i can't think of a better way without whacking XXX a lot of things.
1995-08-19 04:49:15 +04:00
define ether
define fddi
Driver for Essential Communications' RoadRunner HIPPI (800 Mb/sec network) card. With some modification, this could probably also work for their Gigabit Ethernet card based on the same chipset...
1998-05-14 04:04:57 +04:00
define hippi
First Prototype implementation of network interface part for IEEE1394 (if_fw). Current status: Only OHCI chip is supported (fwohci). ping (IPv4) works with Sony's implementation (SmartConnect) on Win98. sometimes works but not stable. Not implemented yet: IRM (Isochronous Resource Manager) functionality. Link layer fragmentation. Topology map. More to do: clean ups MCAP charactor device part dhcp There is no entry in GENERIC config file yet. Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
2000-11-05 20:17:12 +03:00
define ieee1394
config(8) glue for Token-Ring and TROPIC drivers.
1999-03-23 01:33:35 +03:00
define token
port FreeBSD's serial ppp layer to NetBSD. The PPP part seems broken still, but the lmc driver uses the HDLC bits from here anyway.
1999-03-25 06:39:11 +03:00
define sppp
Resolve conflicts in importation of 18-May-2005 ath(4) / net80211(9) from FreeBSD. Introduce compatibility shims (sys/dev/ic/ath_netbsd.[ch], sys/net80211/ieee80211_netbsd.[ch]). Update drivers (an, atu, atw, awi, ipw, iwi, rtw, wi) for the new net80211(9) API.
2005-06-22 10:14:51 +04:00
define wlan: arc4, rijndael
IPv6 kernel code, based on KAME/NetBSD 1.4, SNAP kit 19990628. (Sorry for a big commit, I can't separate this into several pieces...) Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details. - sys/kern: do not assume single mbuf, accept chained mbuf on passing data from userland to kernel (or other way round). - "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ package (ftp://ftp.csl.sony.co.jp/pub/kjc/). - sys/netinet/tcp*: IPv4/v6 dual stack tcp support. - sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those file to be there so we patch it up. - sys/netinet: IPsec additions are here and there. - sys/netinet6/*: most of IPv6 code sits here. - sys/netkey: IPsec key management code - dev/pci/pcidevs: regen In my understanding no code here is subject to export control so it should be safe.
1999-07-01 12:12:45 +04:00
define crypto
Define the ncr5380sbc attribute and compile dev/ic/ncr5380sbc.c if it's used.
1996-01-02 01:27:08 +03:00
New ARP system, supports IPv4 over any hardware link. Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will only support Ethernet. Tcpdump itself should be ok, but libpcap needs lot of work. For the detailed change history, look at the commit log entries for the is-newarp branch.
1997-03-15 21:09:08 +03:00
# devices ARPing IPv4 pull this in:
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
New ARP system, supports IPv4 over any hardware link. Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will only support Ethernet. Tcpdump itself should be ok, but libpcap needs lot of work. For the detailed change history, look at the commit log entries for the is-newarp branch.
1997-03-15 21:09:08 +03:00
define arp
Move ALTQ configuration definitions into altq/files.altq
2002-04-17 01:27:13 +04:00
#
# ALTQ network traffic shaping subsystem
#
include "altq/files.altq"
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move IPKDB config defns to ipkdb/files.ipkdb.
2002-10-11 01:56:50 +04:00
# IPKDB kernel debugger
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move IPKDB config defns to ipkdb/files.ipkdb.
2002-10-11 01:56:50 +04:00
include "ipkdb/files.ipkdb"
Rename recently checked in KGDB to IPKDB to resolve conflicts with older KGDB
1996-10-16 23:32:08 +04:00
lsu -> ld, by popular request.
2000-11-26 20:44:02 +03:00
# Logical disk
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
lsu -> ld, by popular request.
2000-11-26 20:44:02 +03:00
device ld: disk
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ld.c ld needs-flag
ca -> lsu
2000-10-19 18:26:41 +04:00
* Move the mii_bitbang attribute into dev/mii/files.mii * Pull in dev/mii/files.mii from conf/files, rather than playing the magic "files include order" dance in N machine-dependent configuration definitions.
2002-04-17 00:50:16 +04:00
#
# MII/PHY support for network devices
#
include "dev/mii/files.mii"
Centralize the RAIDframe config definitions.
2002-04-17 00:33:00 +04:00
#
# RAIDframe
#
include "dev/raidframe/files.raidframe"
Add dmover(9) glue.
2002-08-02 04:32:12 +04:00
#
# Hardware-assisted data mover API
#
include "dev/dmover/files.dmover"
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Break up the ep driver into isa, eisa, and pci front-ends and a bus-independent core driver. Tested on all three bus types, including an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in your kernel config file to catch this one). XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 06:15:42 +04:00
# "Chipset" drivers. These are the bus-independent routines which
# contain the cfdrivers. Attachments are provided by files.<bus>
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Break up the ep driver into isa, eisa, and pci front-ends and a bus-independent core driver. Tested on all three bus types, including an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in your kernel config file to catch this one). XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 06:15:42 +04:00
From Enami Tsugutomo: Busify and split the aic6360 driver.
1997-10-06 23:49:17 +04:00
# Adaptec AIC-6[32]60 ICs
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device aic: scsi
From Enami Tsugutomo: Busify and split the aic6360 driver.
1997-10-06 23:49:17 +04:00
file dev/ic/aic6360.c aic
Fix an oversight in the AIC-7xxx SEEPROM split.
2000-01-26 09:27:32 +03:00
# SMC 93Cx6 Serial EEPROM devices
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Fix an oversight in the AIC-7xxx SEEPROM split.
2000-01-26 09:27:32 +03:00
define smc93cx6
file dev/ic/smc93cx6.c smc93cx6
Slight adjustments for new version of ahc driver.
1996-05-16 08:00:58 +04:00
# Adaptec 2[789]4X, 394X, aic7770 and aic78[5678]0 SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam opt_ahc.h AHC_DEBUG
defflag opt_ahc.h AHC_NO_TAGS
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device ahc: scsi
Split the code that reads the SEEPROM into its own file.
2000-01-26 09:04:37 +03:00
define ahc_seeprom
Add new files for common VL/EISA ahc code.
2000-03-15 05:10:09 +03:00
define ahc_aic77xx
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/aic7xxx.c ahc
Changes for newer ahc driver, and ahd driver (the latter is a placeholder until it's actually added, soon).
2003-04-19 23:29:10 +04:00
file dev/ic/aic7xxx_osm.c ahc
Split the code that reads the SEEPROM into its own file.
2000-01-26 09:04:37 +03:00
file dev/ic/aic7xxx_seeprom.c ahc_seeprom
Add new files for common VL/EISA ahc code.
2000-03-15 05:10:09 +03:00
file dev/ic/aic77xx.c ahc_aic77xx
Slight adjustments for new version of ahc driver.
1996-05-16 08:00:58 +04:00
Changes for newer ahc driver, and ahd driver (the latter is a placeholder until it's actually added, soon).
2003-04-19 23:29:10 +04:00
# Adaptec aic79xx SCSI controllers
defflag opt_ahd.h AHD_DEBUG
device ahd: scsi
file dev/ic/aic79xx.c ahd
file dev/ic/aic79xx_osm.c ahd
Add glue for 'dpt' driver.
1999-09-28 03:44:27 +04:00
# DPT EATA SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add glue for 'dpt' driver.
1999-09-28 03:44:27 +04:00
device dpt: scsi
file dev/ic/dpt.c dpt
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 17:52:22 +03:00
# Compaq Smart ARRAY controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 17:52:22 +03:00
device cac {unit = -1}
file dev/ic/cac.c cac
lsu -> ld, by popular request.
2000-11-26 20:44:02 +03:00
attach ld at cac with ld_cac
file dev/ic/ld_cac.c ld_cac
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 17:52:22 +03:00
Commit forgotten definition of the ciss driver.
2006-03-22 01:33:07 +03:00
# HP/Compaq Command Interface for SCSI-3 Support
#
device ciss: scsi
file dev/ic/ciss.c ciss
Add a driver for the Mylex DAC960 family (including DEC SWXCR).
2001-02-04 20:05:11 +03:00
# Mylex DAC960 RAID controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add a driver for the Mylex DAC960 family (including DEC SWXCR).
2001-02-04 20:05:11 +03:00
device mlx {unit = -1}
file dev/ic/mlx.c mlx needs-flag
attach ld at mlx with ld_mlx
file dev/ic/ld_mlx.c ld_mlx
Add a driver for ICP-Vortex GDT and Intel Storage RAID controllers. Parts taken from OpenBSD. Test hardware kindly provided by Intel. This still needs management bits, and doesn't support older controllers, but that shouldn't be hard to fix.
2002-04-23 01:05:19 +04:00
# ICP-Vortex/Intel RAID controllers
#
device icp {unit = -1}
file dev/ic/icp.c icp needs-flag
Add support for the user-generated command interface and event logging required by the ICP-Vortex management tools. Many thanks to Achim Leubner at ICP-Vortex for a few bug fixes and for testing.
2003-05-13 19:42:33 +04:00
file dev/ic/icp_ioctl.c icp
Add a driver for ICP-Vortex GDT and Intel Storage RAID controllers. Parts taken from OpenBSD. Test hardware kindly provided by Intel. This still needs management bits, and doesn't support older controllers, but that shouldn't be hard to fix.
2002-04-23 01:05:19 +04:00
attach ld at icp with ld_icp
file dev/ic/ld_icp.c ld_icp
device icpsp: scsi
file dev/ic/icpsp.c icpsp
attach icpsp at icp
Add a driver for Adaptec FSA RAID controllers, as often found in Dell servers. Based on the FreeBSD/OpenBSD versions.
2002-04-26 06:05:07 +04:00
# Adaptec FSA RAID controllers
#
device aac {unit = -1}
file dev/ic/aac.c aac
attach ld at aac with ld_aac
file dev/ic/ld_aac.c ld_aac
Add AdvanSys support
1998-08-26 18:20:37 +04:00
# AdvanSys 1200A, 1200B and ULTRA SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add AdvanSys support
1998-08-26 18:20:37 +04:00
device adv: scsi
file dev/ic/adv.c adv
advlib.c and advmcode.c should be built for all adv, not just adv_pci. From takashi.yamamoto@bigfoot.com, kern/12341.
2001-03-08 07:18:17 +03:00
file dev/ic/advlib.c adv
file dev/ic/advmcode.c adv
Add AdvanSys support
1998-08-26 18:20:37 +04:00
Add AdvanSys ULTRA WIDE SCSI controllers
1998-09-26 20:28:16 +04:00
# AdvanSys ULTRA WIDE SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add AdvanSys ULTRA WIDE SCSI controllers
1998-09-26 20:28:16 +04:00
device adw: scsi
file dev/ic/adw.c adw
Add generic bha and uha code.
1996-09-01 00:27:55 +04:00
# BusLogic MultiMaster and MultiMaster Ultra SCSI controllers
Reorder device declarations of bha and aha so th BusLogic driver probes before before the Adaptec 1542/1642 driver. As commented, Probing AHA first configures bhas as aha, via their AHA hardware-compatibility mode.
1997-07-29 02:48:59 +04:00
# (Must be declared before AHA to ensure bha probes before aha.
# Probing AHA first configures bhas as aha, via their AHA
# hardware-compatibility mode.)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device bha: scsi
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/bha.c bha
Add generic bha and uha code.
1996-09-01 00:27:55 +04:00
Reorder device declarations of bha and aha so th BusLogic driver probes before before the Adaptec 1542/1642 driver. As commented, Probing AHA first configures bhas as aha, via their AHA hardware-compatibility mode.
1997-07-29 02:48:59 +04:00
# Adaptec AHA-154x and AHA-164x controllers
# (must be after bha, see above)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device aha: scsi
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/aha.c aha
Reorder device declarations of bha and aha so th BusLogic driver probes before before the Adaptec 1542/1642 driver. As commented, Probing AHA first configures bhas as aha, via their AHA hardware-compatibility mode.
1997-07-29 02:48:59 +04:00
Add a driver for the Initio INIC-940/950 PCI SCSI controllers. Based on OpenBSD's iha driver, and modified some structures by me. Tested on arc, i386 and macppc.
2001-06-03 17:43:45 +04:00
# Initio INIC-940/950 SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add a driver for the Initio INIC-940/950 PCI SCSI controllers. Based on OpenBSD's iha driver, and modified some structures by me. Tested on arc, i386 and macppc.
2001-06-03 17:43:45 +04:00
device iha: scsi
file dev/ic/iha.c iha
add an entry for 'isp', the MI Qlogic ISP 10x0 SCSI Controller driver, from Matt Jacob.
1997-03-12 04:56:18 +03:00
# Qlogic ISP 10x0 SCSI Controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_isp.h ISP_DISABLE_1020_SUPPORT
ISP_DISABLE_1080_SUPPORT
ISP_DISABLE_2100_SUPPORT
ISP_DISABLE_2200_SUPPORT
ISP_DISABLE_FW ISP_TARGET_MODE
Add ISP_FW_CRASH_DUMP option for isp.
2002-02-22 01:23:33 +03:00
ISP_FW_CRASH_DUMP
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam opt_isp.h ISP_LOGDEFAULT
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device isp: scsi
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/isp.c isp
New file for building isp host adapter.
1998-07-16 00:22:19 +04:00
file dev/ic/isp_netbsd.c isp
don't compile isp_target.c if ISP_TARGET_MODE is not required
2005-02-01 19:00:50 +03:00
file dev/ic/isp_target.c isp & isp_target_mode
add an entry for 'isp', the MI Qlogic ISP 10x0 SCSI Controller driver, from Matt Jacob.
1997-03-12 04:56:18 +03:00
Add lfmiop (LSILogic Fusion-MPT I/O Processor) placeholders for driver to added latter.
2002-05-18 11:23:04 +04:00
# LSILogic Fusion-MPT I/O Processor SCSI/FC Controllers
#
Device driver for the LSI Logic Fusion-MPT based SCSI and Fibre Channel adapters. Currently supports: * LSI 53c1030 Ultra320 SCSI * LSI FC909, FC909A, FC919, and FC929 Fibre Channel Ported from the FreeBSD "mpt" driver, written by Greg Ansley. Thanks to Frank van der Linden for testing and some bug finding. This work was sponsored by Wasabi Systems, Inc.
2003-04-17 02:02:59 +04:00
device mpt: scsi
file dev/ic/mpt.c mpt
file dev/ic/mpt_debug.c mpt
file dev/ic/mpt_netbsd.c mpt
Add MI NCR/Symbios 53c700 SCSI driver. This "oosiop" driver was originally written by Shuichiro URATA for arc port, and then it was modified by me to make it work also on hp700. This driver has been tested on my NEC Express5800/240 with 53c700-66 for several months, and also tested on HP9000 735/125 with 53c700 (though current hp700 port has been broken since SA merge). Both sync transfer and disconnect/reselect work fine, but tagged queuing is not implemented yet.
2003-04-06 13:48:41 +04:00
Workbit NinjaSCSI-32 PCI/CardBus SCSI driver (njs)
2004-08-26 18:13:46 +04:00
# Workbit NinjaSCSI-32 controllers
device njs: scsi
file dev/ic/ninjascsi32.c njs
Add MI NCR/Symbios 53c700 SCSI driver. This "oosiop" driver was originally written by Shuichiro URATA for arc port, and then it was modified by me to make it work also on hp700. This driver has been tested on my NEC Express5800/240 with 53c700-66 for several months, and also tested on HP9000 735/125 with 53c700 (though current hp700 port has been broken since SA merge). Both sync transfer and disconnect/reselect work fine, but tagged queuing is not implemented yet.
2003-04-06 13:48:41 +04:00
# Symbios/NCR 53c700 SCSI controllers
device oosiop: scsi
file dev/ic/oosiop.c oosiop
Add lfmiop (LSILogic Fusion-MPT I/O Processor) placeholders for driver to added latter.
2002-05-18 11:23:04 +04:00
Add a MI driver for the Symbios/NCR 53c710 SCSI controller. This is based on amiga's siop driver, but converted to use bus_space(9) functions and modified to fit bus_dma(9) framework. Currently tested on NetBSD/arc with jazzio 53c710 SCSI, which really requires bus_dma(9) functions :-) Sync transfers and disconnect/reconnect are also working. TODO: - Test under more heavy load - Clean up osiop_checkintr() hander - Reorganize command queue and sync negotiation handling more suitable for thorpej-scsipi mid-layer - Re-think defered interrupt handling for amiga
2001-04-30 08:47:50 +04:00
# Symbios/NCR 53c710 SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add a MI driver for the Symbios/NCR 53c710 SCSI controller. This is based on amiga's siop driver, but converted to use bus_space(9) functions and modified to fit bus_dma(9) framework. Currently tested on NetBSD/arc with jazzio 53c710 SCSI, which really requires bus_dma(9) functions :-) Sync transfers and disconnect/reconnect are also working. TODO: - Test under more heavy load - Clean up osiop_checkintr() hander - Reorganize command queue and sync negotiation handling more suitable for thorpej-scsipi mid-layer - Re-think defered interrupt handling for amiga
2001-04-30 08:47:50 +04:00
device osiop: scsi
file dev/ic/osiop.c osiop
Update for siop split.
2000-05-15 12:27:24 +04:00
# common stuff for siop and esiop
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
define siop_common
file dev/ic/siop_common.c siop_common
Update for siop split.
2000-05-15 12:27:24 +04:00
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller (the name 'siop' is still being discussed, may change). Only basic disconnect/reselect for now, no sync/wide negotiation. Tested with 810A, 875 and 895 on i386 only. The bus-independant part should also be able to handle the 53c720 and 53c770. A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 21:56:58 +04:00
# Symbios/NCR 53c720/53c8xx SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
device siop: scsi,siop_common
file dev/ic/siop.c siop
defflag SIOP_SYMLED.
2002-04-18 16:04:05 +04:00
defflag opt_siop.h SIOP_SYMLED
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller (the name 'siop' is still being discussed, may change). Only basic disconnect/reselect for now, no sync/wide negotiation. Tested with 810A, 875 and 895 on i386 only. The bus-independant part should also be able to handle the 53c720 and 53c770. A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 21:56:58 +04:00
First cut at a esiop driver (enhanced siop). Doesn't implement tagged queuing yet. If is restricted to SIOP which implement the load/store instruction, and has 10 scratch registers (basically, 825 and newer, possibly 770). It implements a different interface between host and script, using a real ring for command starts, and improved support for reconnect which will allow 256 tag per device. It uses interrupt on the fly to signal complete command, which allows several commands to be serviced per interrupt and doesn't require the script to stop to signal command completion.
2002-04-22 02:52:05 +04:00
device esiop: scsi,siop_common
file dev/ic/esiop.c esiop
Add generic bha and uha code.
1996-09-01 00:27:55 +04:00
# UltraStor SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device uha: scsi
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/uha.c uha
Add generic bha and uha code.
1996-09-01 00:27:55 +04:00
Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD. This is very adhoc work for IETF meeting. - Since it seems that 'an' and 'wi' have similar hardware, low level functions should be shared. - There are PCI/ISA cards of Aironet but not supported yet. - The wiconfig interface is changed so that wiconfig cannot be used. - 'ancontrol' of FreeBSD is not ported. - Only infrastructure mode is tested. - WEP is not supported. Though I only have an Aironet card, Cisco card should be expected to work.
2000-12-12 02:16:50 +03:00
# Aironet PC4500/PC4800
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
an(4) needs wlan support
2004-02-03 22:46:18 +03:00
device an: arp, wlan, ifnet
Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD. This is very adhoc work for IETF meeting. - Since it seems that 'an' and 'wi' have similar hardware, low level functions should be shared. - There are PCI/ISA cards of Aironet but not supported yet. - The wiconfig interface is changed so that wiconfig cannot be used. - 'ancontrol' of FreeBSD is not ported. - Only infrastructure mode is tested. - WEP is not supported. Though I only have an Aironet card, Cisco card should be expected to work.
2000-12-12 02:16:50 +03:00
file dev/ic/an.c an
Support WEP functions for awi driver. arc4 implementation by Kalle Kaukonen has been added. define "wlan" in files. XXX: only awi depends on wlan for now. Allow authentication for adhoc (IBSS) mode. Disable adhoc mode without bssid (mediaopt adhoc,flag0) for FH radio. FH cannot work without synchronization by beacons. Align IP header for ethernet encapsulation (IFF_FLAG0) mode. Print available access points for IFF_DEBUG.
2000-07-04 18:27:56 +04:00
# AMD 79c930-based 802.11 cards
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Support WEP functions for awi driver. arc4 implementation by Kalle Kaukonen has been added. define "wlan" in files. XXX: only awi depends on wlan for now. Allow authentication for adhoc (IBSS) mode. Disable adhoc mode without bssid (mediaopt adhoc,flag0) for FH radio. FH cannot work without synchronization by beacons. Align IP header for ethernet encapsulation (IFF_FLAG0) mode. Print available access points for IFF_DEBUG.
2000-07-04 18:27:56 +04:00
device awi: arp, wlan, ifnet
file dev/ic/awi.c awi
file dev/ic/am79c930.c awi
divided into PCMCIA attachment and common code of wi. since if_wi_ieee.h does not depend for pcmcia, sys/dev/pcmcia/if_wi_ieee.h was moved to sys/dev/ic/wi_ieee.h .
2001-05-06 07:26:38 +04:00
# Lucent & Intersil WaveLan IEEE (802.11)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
device<tab> attach<tab> file<tab>
2004-02-14 19:35:58 +03:00
device wi: arp, wlan, ifnet
divided into PCMCIA attachment and common code of wi. since if_wi_ieee.h does not depend for pcmcia, sys/dev/pcmcia/if_wi_ieee.h was moved to sys/dev/ic/wi_ieee.h .
2001-05-06 07:26:38 +04:00
file dev/ic/wi.c wi
Complete replacement of the old 802.11 layer with the new.
2003-10-13 12:34:15 +04:00
# Atheros 5210/5211/5212 multi-mode 802.11
#
Rename AH_DEBUG, AH_ASSERT, and AH_DEBUG_ALQ to ATH_XXX. Use the opt_ah.h for the provided HAL to get options like AH_REGOPS_FUNC. Add AH_REGOPS_FUNC to a few opt_ah.h that don't have it in this version of the HAL but need it. (The next version from Sam should have this fixed in it. If it doesn't, then we'll have to take care at import time.) Ultimately, this should make future imports even easier, and individual ports should not have to worry about whether AH_REGOPS_FUNC is properly defined or not, since the opt_ah.h will just take care of it automatically. Ok'd by dyoung@.
2006-04-05 10:54:26 +04:00
defflag opt_athhal.h ATHHAL_ASSERT ATHHAL_DEBUG ATHHAL_DEBUG_ALQ
device<tab> attach<tab> file<tab>
2004-02-14 19:35:58 +03:00
device ath: arp, wlan, ifnet
Complete replacement of the old 802.11 layer with the new.
2003-10-13 12:34:15 +04:00
file dev/ic/ath.c ath
Resolve conflicts in importation of 18-May-2005 ath(4) / net80211(9) from FreeBSD. Introduce compatibility shims (sys/dev/ic/ath_netbsd.[ch], sys/net80211/ieee80211_netbsd.[ch]). Update drivers (an, atu, atw, awi, ipw, iwi, rtw, wi) for the new net80211(9) API.
2005-06-22 10:14:51 +04:00
file dev/ic/ath_netbsd.c ath
Switch to John Bicket's SampleRate algorithm for bitrate adaptation on Atheros cards.
2005-10-21 08:07:48 +04:00
file dev/ic/athrate-sample.c ath
Reorganize ath layout as requested by sam@ and suggested by dyoung@ in http://mail-index.netbsd.org/tech-net/2006/03/15/0000.html. The new layout almost precisely matches FreeBSD, and should make future imports much easier. At the same time, import the current 0.9.16.16 HAL from FreeBSD. According to sam@, this is the proper version we should be using.
2006-04-02 09:52:14 +04:00
file contrib/dev/ath/netbsd/ah_osdep.c ath
Convert existing ath users to new Makefile, except for amd64, which needs the rules due to needing to conditionally postprocess the HAL object file. Macppc needs a a non-ELF HAL (EABI) object, so take care of that by default in the atheros include file.
2006-04-04 07:13:12 +04:00
object /athhal.o ath
Complete replacement of the old 802.11 layer with the new.
2003-10-13 12:34:15 +04:00
Add driver atw for PCI/Mini-PCI/Cardbus 802.11b NICs based on the ADMtek ADM8211. Read the man page for bugs and other outstanding issues.
2003-07-07 02:56:07 +04:00
# ADMtek ADM8211 802.11
#
device<tab> attach<tab> file<tab>
2004-02-14 19:35:58 +03:00
device atw: arp, wlan, ifnet, smc93cx6
Add driver atw for PCI/Mini-PCI/Cardbus 802.11b NICs based on the ADMtek ADM8211. Read the man page for bugs and other outstanding issues.
2003-07-07 02:56:07 +04:00
file dev/ic/atw.c atw
Add rtw(4).
2004-09-26 07:03:17 +04:00
# Realtek RTL8180 802.11
#
device rtw: arp, wlan, ifnet, smc93cx6
file dev/ic/rtw.c rtw
file dev/ic/rtwphy.c rtw
file dev/ic/rtwphyio.c rtw
add autoconf glue for the ralink wireless drivers, basically from PR kern/30449, but changed so that pci/cardbus and usb devices are all called "ral" to the user, so that code can be shared eventually
2005-07-02 00:11:20 +04:00
# Ralink RT2500 802.11
device ral: arp, ether, ifnet, wlan
define ralcommon
file dev/ic/ral.c ralcommon
Break up the ep driver into isa, eisa, and pci front-ends and a bus-independent core driver. Tested on all three bus types, including an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in your kernel config file to catch this one). XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 06:15:42 +04:00
# 3Com Etherlink-III Ethernet controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add the mii_bitbang attribute to the elink3 and tlp drivers.
1999-11-19 21:16:13 +03:00
device ep: arp, ether, ifnet, mii, mii_bitbang
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/elink3.c ep
Break up the ep driver into isa, eisa, and pci front-ends and a bus-independent core driver. Tested on all three bus types, including an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in your kernel config file to catch this one). XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 06:15:42 +04:00
Add info for ex driver.
1998-11-04 03:28:05 +03:00
# 3Com EtherLink XL Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define the `mii_bitbang' attribute, and give it to the `ex' driver.
1999-11-17 20:56:00 +03:00
device ex: arp, ether, ifnet, mii, mii_bitbang
Add info for ex driver.
1998-11-04 03:28:05 +03:00
file dev/ic/elinkxl.c ex
Add files lines for lc device (LEMAC, DEC EtherWORKS III).
1997-08-01 01:56:33 +04:00
# DEC EtherWORKS III (LEMAC) Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device lc: arp, ether, ifnet
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/lemac.c lc
Add files lines for lc device (LEMAC, DEC EtherWORKS III).
1997-08-01 01:56:33 +04:00
Actually define the `le' device.
1996-05-07 12:56:54 +04:00
# LANCE and PCnet Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device le: arp, ether, ifnet
whitespace police
2001-02-24 04:34:28 +03:00
define le24
define le32
add declaration for hd64570, which the ntwo driver uses
1998-07-26 07:29:12 +04:00
file dev/ic/am7990.c le24
Split the LANCE driver into a part specific to the classic chip with 24-bit DMA addresses, and an independant part. Implement support for the 32-bit mode in the newer (79c9xx) chips.
1998-07-21 21:26:45 +04:00
file dev/ic/am79900.c le32
file dev/ic/lance.c le24 | le32
Actually define the `le' device.
1996-05-07 12:56:54 +04:00
Declare the `depca' device here, now that it can attach to multiple busses.
2000-08-11 18:35:57 +04:00
# DEC DEPCA-family of LANCE Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Declare the `depca' device here, now that it can attach to multiple busses.
2000-08-11 18:35:57 +04:00
device depca { }: le24
file dev/ic/depca.c depca
attach le at depca with le_depca
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
# Sun HME Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Declare the `hme' device.
1999-06-27 16:43:08 +04:00
device hme: arp, ether, ifnet, mii
file dev/ic/hme.c hme
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
Driver for Sun GEM gigabit ethernet, Sun ERI 10/100, and Apple GMAC.
2001-09-16 04:11:41 +04:00
# Sun GEM Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Driver for Sun GEM gigabit ethernet, Sun ERI 10/100, and Apple GMAC.
2001-09-16 04:11:41 +04:00
device gem: arp, ether, ifnet, mii
file dev/ic/gem.c gem
Add the dp8390 driver back end/attribute.
1997-04-29 09:11:32 +04:00
# 8390-family Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
* Don't make IPKDB an option-dependency of IPKDB_DP8390 (IPKDB_DP8390 does not "imply" IPKDB ... it is merely an IPKDB parameter). * Place IPKDB-related selectors in lower-case.
2002-10-11 05:00:35 +04:00
defflag opt_ipkdb.h IPKDB_DP8390
Add the dp8390 driver back end/attribute.
1997-04-29 09:11:32 +04:00
define dp8390nic
* Don't make IPKDB an option-dependency of IPKDB_DP8390 (IPKDB_DP8390 does not "imply" IPKDB ... it is merely an IPKDB parameter). * Place IPKDB-related selectors in lower-case.
2002-10-11 05:00:35 +04:00
file dev/ic/dp8390.c dp8390nic | ipkdb_dp8390
Add the dp8390 driver back end/attribute.
1997-04-29 09:11:32 +04:00
if_media support for the DP83905 AT/LANTIC (a souped-up DP8390).
2001-12-16 03:22:43 +03:00
# National Semiconductor DP83905 AT/LANTIC Ethernet media support
#
define dp83905
file dev/ic/dp83905.c dp83905
Add code to support the bugged Macronix MX98905 chip, as used in several podulebus Ethernet cards. This replaces the NE2000 memory-access routines with ones that don't try to transfer more than 255 bytes at a time. This code should perhaps be merged into ne2000.c, but presumably most NE2000 clones won't need it.
2001-12-15 20:47:34 +03:00
# Macronix MX98905 Ethernet controller
# (use as an attribute for an "ne" bus attachment)
#
define mx98905
file dev/ic/mx98905.c mx98905
config(8) glue for Token-Ring and TROPIC drivers.
1999-03-23 01:33:35 +03:00
# TROPIC Token-Ring controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
config(8) glue for Token-Ring and TROPIC drivers.
1999-03-23 01:33:35 +03:00
device tr: arp, token, ifnet
file dev/ic/tropic.c tr
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
# NCR 5380 SCSI Bus Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
define ncr5380sbc
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/ncr5380sbc.c ncr5380sbc
Move `nca' declaration to `conf/files'.
2000-03-20 14:03:42 +03:00
device nca: scsi, ncr5380sbc
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
Add entries for the NatSemi MM58167 time-of-day clock chip and the chipset used in the Sun2 "sc" SCSI adapters.
2001-04-20 20:39:22 +04:00
# Sun sc PAL SCSI Bus Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add entries for the NatSemi MM58167 time-of-day clock chip and the chipset used in the Sun2 "sc" SCSI adapters.
2001-04-20 20:39:22 +04:00
define sunscpal
file dev/ic/sunscpal.c sunscpal
device ssc: scsi, sunscpal
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
# DEC FDDI Chipset
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
define pdq
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/pdq.c pdq
file dev/ic/pdq_ifsubr.c pdq
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
# Cyclades Cyclom-8/16/32
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device cy: tty
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/cy.c cy needs-flag
Add stub for cyclades multi-port serial cards
1996-09-24 21:43:35 +04:00
Centralize the declaration of the "en" driver (Efficient Networks, Inc. 155Mb/sec ATM interface).
1996-11-13 02:58:01 +03:00
# Efficient Networks, Inc. ATM interface
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device en: atm, ifnet
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/midway.c en
Centralize the declaration of the "en" driver (Efficient Networks, Inc. 155Mb/sec ATM interface).
1996-11-13 02:58:01 +03:00
Define the ncr53c9x attribute to pull in the MI 53c9x driver.
1997-02-27 04:13:45 +03:00
# NCR 53x9x or Emulex ESP SCSI Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define the ncr53c9x attribute to pull in the MI 53c9x driver.
1997-02-27 04:13:45 +03:00
define ncr53c9x
Move esp declaration to conf/files.
2000-03-25 22:58:04 +03:00
device esp: scsi, ncr53c9x
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/ncr53c9x.c ncr53c9x
Define the ncr53c9x attribute to pull in the MI 53c9x driver.
1997-02-27 04:13:45 +03:00
Move spc into the MI area.
2004-07-07 12:41:34 +04:00
# Fujitsu MB87030/MB89352 SCSI Protocol Controller
device spc: scsi
file dev/ic/mb89352.c spc
Attachment for the HD44780 display and keypad on the front of Cobalt machines.
2003-01-20 04:26:12 +03:00
# Hitachi HD44780 LCD panel controller
define hd44780
file dev/ic/hd44780_subr.c hd44780
file dev/ic/lcdkp_subr.c hd44780
new attribute matrixkp
2005-01-31 09:09:03 +03:00
# Matrix keypad
define matrixkp
file dev/ic/matrixkp_subr.c matrixkp
add declaration for hd64570, which the ntwo driver uses
1998-07-26 07:29:12 +04:00
# Hitachi HD64570 serial controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move esp declaration to conf/files.
2000-03-25 22:58:04 +03:00
define hd64570
add declaration for hd64570, which the ntwo driver uses
1998-07-26 07:29:12 +04:00
file dev/ic/hd64570.c hd64570
move ntwoc here now that we have isa and pci attachments
2000-01-04 09:37:05 +03:00
# Riscom/N2 ISA/PCI Sync Serial Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
move ntwoc here now that we have isa and pci attachments
2000-01-04 09:37:05 +03:00
device ntwoc: ifnet, hd64570
Add line for the i82586 driver.
1997-07-23 03:33:33 +04:00
# Intel 82586 Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add line for the i82586 driver.
1997-07-23 03:33:33 +04:00
define i82586
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/i82586.c i82586
Add line for the i82586 driver.
1997-07-23 03:33:33 +04:00
Import MI part of new Intel i82596 Ethernet driver.
2004-03-12 14:37:17 +03:00
# Intel 82596 Ethernet Controller
#
define i82596
file dev/ic/i82596.c i82596
Configuration glue for i82557 fast Ethernet driver.
1999-06-20 20:34:38 +04:00
# Intel 82557/82558/82559 Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Configuration glue for i82557 fast Ethernet driver.
1999-06-20 20:34:38 +04:00
device fxp: ether, ifnet, arp, mii
file dev/ic/i82557.c fxp
Split the arm26 Ether3 (ea) driver into an MI driver for the SEEQ 8005 chip, and a front-end driver for the Ether3. Only semantic change is to remove ea_claimirq() and ea_releaseirq() on the grounds that the seem too spurious to warrant a callback to the front-end.
2000-09-19 00:51:14 +04:00
# SEEQ 8005 Advanced Ethernet Data Link Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Split the arm26 Ether3 (ea) driver into an MI driver for the SEEQ 8005 chip, and a front-end driver for the Ether3. Only semantic change is to remove ea_claimirq() and ea_releaseirq() on the grounds that the seem too spurious to warrant a callback to the front-end.
2000-09-19 00:51:14 +04:00
define seeq8005
file dev/ic/seeq8005.c seeq8005
Pull "sm" driver declaration down from marc-pcmcia branch.
1997-09-02 05:50:32 +04:00
# SMC 91Cxx Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add MII support to smc91cxx driver. This is supported for the 91c100 and 91c100FD (FEAST) controllers. Existing controllers should continue to work as they have. Added the card's memory to the probe message.
2000-07-31 01:34:47 +04:00
device sm: arp, ether, ifnet, mii, mii_bitbang
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/smc91cxx.c sm
Pull "sm" driver declaration down from marc-pcmcia branch.
1997-09-02 05:50:32 +04:00
Device driver for the SMC 83c170 Ethernet PCI Integrated Controller (EPIC/100) used in the SMC EtherPower II. Media control isn't yet supported, due to some MII infrastructure problems which I hope to address soon. This isn't a huge deal, since the PHY defaults to auto-negotiate mode. Also, the device just programs the multicast hash table to accept all multicast, to avoid a hardware bug that causes the multicast address filter to lose in 10Mb/s mode. This bug will be fixed in a more sane way once the media control issues are dealt with.
1998-06-02 05:29:41 +04:00
# SMC 83C170 EPIC/100 Fast Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
miibus -> mii, and give it a locator "phy".
1998-08-11 04:06:12 +04:00
device epic: arp, ether, ifnet, mii
Device driver for the SMC 83c170 Ethernet PCI Integrated Controller (EPIC/100) used in the SMC EtherPower II. Media control isn't yet supported, due to some MII infrastructure problems which I hope to address soon. This isn't a huge deal, since the PHY defaults to auto-negotiate mode. Also, the device just programs the multicast hash table to accept all multicast, to avoid a hardware bug that causes the multicast address filter to lose in 10Mb/s mode. This bug will be fixed in a more sane way once the media control issues are dealt with.
1998-06-02 05:29:41 +04:00
file dev/ic/smc83c170.c epic
Driver for the DEC SGEC, Second Generation Ethernet Controller.
1999-08-08 15:41:28 +04:00
# DEC SGEC Second Generation Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Driver for the DEC SGEC, Second Generation Ethernet Controller.
1999-08-08 15:41:28 +04:00
define sgec
file dev/ic/sgec.c sgec
Add driver for MCA Tiara LANCard / Fujitsu mb86950 EtherStar. Driver provided in PR kern/26899 by Dave Barnes.
2005-04-03 15:21:44 +04:00
# MB86950 Ethernet Controller
#
define mb86950
file dev/ic/mb86950.c mb86950
Define new attribute `mb86960' and new device `mbe'.
1998-03-22 07:37:04 +03:00
# MB8696x Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define new attribute `mb86960' and new device `mbe'.
1998-03-22 07:37:04 +03:00
define mb86960
file dev/ic/mb86960.c mb86960
# Generic MB8696x Ethernet Controller driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define new attribute `mb86960' and new device `mbe'.
1998-03-22 07:37:04 +03:00
device mbe: arp, ether, ifnet, mb86960
Add the Interwave audio chip.
1997-10-07 00:12:26 +04:00
# Interwave Am78C201 audio driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add the Interwave audio chip.
1997-10-07 00:12:26 +04:00
define interwave
file dev/ic/interwave.c interwave
TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it. No optionboards yet for Melody, only audio driver. MPEG data types for audio.c
1997-10-17 03:58:10 +04:00
# TMS 320av110 MPEG2/audio driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it. No optionboards yet for Melody, only audio driver. MPEG data types for audio.c
1997-10-17 03:58:10 +04:00
define tms320av110
file dev/ic/tms320av110.c tms320av110
From marc-pcmcia branch: add declaration of the "ne" driver for NE2000-compatible ethernet cards.
1997-10-15 02:49:02 +04:00
# Novell NE2000-compatible Ethernet cards, based on the
# National Semiconductor DS8390.
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_ipkdb.h IPKDB_NE : IPKDB_DP8390
Oops, `mii' attribute has to go onto the device decl.
2001-02-13 05:31:41 +03:00
device ne: ether, ifnet, arp, dp8390nic, mii
* Don't make IPKDB an option-dependency of IPKDB_DP8390 (IPKDB_DP8390 does not "imply" IPKDB ... it is merely an IPKDB parameter). * Place IPKDB-related selectors in lower-case.
2002-10-11 05:00:35 +04:00
file dev/ic/ne2000.c ne | ipkdb_ne
From marc-pcmcia branch: add declaration of the "ne" driver for NE2000-compatible ethernet cards.
1997-10-15 02:49:02 +04:00
Add device declaration for the "com" driver. In a perfect world, this would be done with attributes, but alas... *sigh*
1997-10-16 04:38:11 +04:00
# 8250/16[45]50-based "com" ports
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
remove the COM_MPLOCK option. always include the spinlock in the softc and always call the simple_* locking functions. the locking functions are compiled out if they are not needed anyway, so a separate option for this doesn't gain anything. this also fixes the serial console on my alpha ES40 (which doesn't make much sense since the com driver should still be under the big lock on alpha, but whatever).
2005-12-27 03:46:38 +03:00
defflag opt_com.h COM_DEBUG
Rename the COM16650 option to COM_16650, for consistency with other com variant options.
2004-05-01 23:03:59 +04:00
# XXX In a perfect world, this would be done with attributes
defflag COM_PXA2X0.
2004-05-01 23:06:24 +04:00
defflag opt_com.h COM_16650 COM_HAYESP COM_PXA2X0
Support attachments to `com' needed for the Sun Keyboard/Mouse line disciplines.
2000-09-22 03:29:43 +04:00
device com { } : tty
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/com.c com needs-flag
Add device declaration for the "com" driver. In a perfect world, this would be done with attributes, but alas... *sigh*
1997-10-16 04:38:11 +04:00
Split the PC-like keyboard controller driver into chip back-end and bus front-end.
1999-12-04 01:48:22 +03:00
# PC-like keyboard controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add pckbport attribute, and apply it to pckbc. Somehow I missed this file in the main commit of pckbport. *blush*
2004-03-14 01:45:23 +03:00
device pckbc: pckbport
pckbc_machdep_cnattach has been replaced by pckbport_machdep_cnattach, so the former attribute can be removed.
2004-03-14 16:52:12 +03:00
file dev/ic/pckbc.c pckbc needs-flag
Split the PC-like keyboard controller driver into chip back-end and bus front-end.
1999-12-04 01:48:22 +03:00
Add attimer(4) driver, with ISA and ACPI attachments. attimer(4) is the new body of the part of pcppi(4) that mapped the TIMER1 register to set the pitch of the bell. It was necessary to separate them in order to have a working ACPI attachment (as the two appear as different devices in the ACPI structures).
2005-03-26 02:06:19 +03:00
device attimer
file dev/ic/attimer.c attimer needs-flag
Add entry for CD240[01] driver.
1999-02-13 20:07:36 +03:00
# Cirrus Logic CD240[01] 4-port Multi-Protocol Communications Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add entry for CD240[01] driver.
1999-02-13 20:07:36 +03:00
device clmpcc: tty
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/clmpcc.c clmpcc needs-flag
Add entry for CD240[01] driver.
1999-02-13 20:07:36 +03:00
Initial import of National Semiconductor LM7[89] Hardware Monitor with isa and pnpbios attach. examples: lm0 at pnpbios0 index? lm0 at isa? port 0x290 TODO: spinlocks, i2c interface.
2000-02-25 05:17:43 +03:00
# National Semiconductor LM7[89]
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
device lm: sysmon_envsys
file dev/ic/nslm7x.c lm needs-flag
Initial import of National Semiconductor LM7[89] Hardware Monitor with isa and pnpbios attach. examples: lm0 at pnpbios0 index? lm0 at isa? port 0x290 TODO: spinlocks, i2c interface.
2000-02-25 05:17:43 +03:00
Driver for Essential Communications' RoadRunner HIPPI (800 Mb/sec network) card. With some modification, this could probably also work for their Gigabit Ethernet card based on the same chipset...
1998-05-14 04:04:57 +04:00
# Essential Communications Corp. HIPPI Interface
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
device esh: hippi, ifnet
file dev/ic/rrunner.c esh needs-flag
Driver for Essential Communications' RoadRunner HIPPI (800 Mb/sec network) card. With some modification, this could probably also work for their Gigabit Ethernet card based on the same chipset...
1998-05-14 04:04:57 +04:00
Split SMC chipset ARCnet driver into - machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h, using bus_space methods - ZBUS frontend in arch/amiga/dev/if_bah_zbus.c - added IPL_SOFTNET to arch/amiga/include/intr.h, for this Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-03 02:32:06 +04:00
# SMC 90c26, SMC 90C56 (and 90C66 if in compat mode) chip driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
device bah: ifnet, arc, arp
file dev/ic/smc90cx6.c bah
Split SMC chipset ARCnet driver into - machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h, using bus_space methods - ZBUS frontend in arch/amiga/dev/if_bah_zbus.c - added IPL_SOFTNET to arch/amiga/include/intr.h, for this Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-03 02:32:06 +04:00
* Redo the way the way the MIDI driver attaches to audio devices. * Improve the midisyn layer a little. * Add a driver for the Yamaha OPL[23] FM synths. The opl driver is not finished yet; it sounds pretty awful. For some strange reason I cannot get any FM sound from my SB64 cards, but a regular SB16 works fine.
1998-08-18 01:16:09 +04:00
# OPL2/OPL3 FM synth driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Get opl MIDI dependecy right.
1998-08-23 02:53:06 +04:00
device opl: midibus, midisyn
* Redo the way the way the MIDI driver attaches to audio devices. * Improve the midisyn layer a little. * Add a driver for the Yamaha OPL[23] FM synths. The opl driver is not finished yet; it sounds pretty awful. For some strange reason I cannot get any FM sound from my SB64 cards, but a regular SB16 works fine.
1998-08-18 01:16:09 +04:00
file dev/ic/opl.c opl
file dev/ic/oplinstrs.c opl
Move the mpu device declaration to conf/files. Let the mpu device attach at the sb device, and then midi at the mpu. Update the mpu at eso attachment.
1999-08-02 21:37:41 +04:00
# MPU401 MIDI UART compatibles
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move the mpu device declaration to conf/files. Let the mpu device attach at the sb device, and then midi at the mpu. Update the mpu at eso attachment.
1999-08-02 21:37:41 +04:00
device mpu: midibus
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/mpu.c mpu needs-flag
Move the mpu device declaration to conf/files. Let the mpu device attach at the sb device, and then midi at the mpu. Update the mpu at eso attachment.
1999-08-02 21:37:41 +04:00
Define the ad1848 attribute here.
1998-08-26 02:38:29 +04:00
# AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define the ad1848 attribute here.
1998-08-26 02:38:29 +04:00
define ad1848
file dev/ic/ad1848.c ad1848
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
# AMD 7930 audio/ISDN codec
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Make am7930 driver machine independent. PR 10032 from Gregory McGarry.
2000-05-02 10:30:49 +04:00
define am7930
file dev/ic/am7930.c am7930
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
# SPARC `SUNW,audiocs'
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename the audio "bus" attribute audiobus to avoid confusion with audio device.
2002-04-22 13:41:19 +04:00
device audiocs: audiobus, auconv, ad1848
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
file dev/ic/cs4231.c audiocs
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
# AC-97 CODECs
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
define ac97
file dev/ic/ac97.c ac97
Software codec for Oki MSM6258 voice synthesizer. Recording untested.
2001-05-02 16:53:31 +04:00
# Oki MSM6258 support code
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Software codec for Oki MSM6258 voice synthesizer. Recording untested.
2001-05-02 16:53:31 +04:00
define msm6258
file dev/ic/msm6258.c msm6258
Define LSI64854.
1998-08-30 01:52:54 +04:00
# LSI64854 DMA controller back-end
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define LSI64854.
1998-08-30 01:52:54 +04:00
define lsi64854
file dev/ic/lsi64854.c lsi64854
add a backend serial driver for the cirrus logic CL-CD180/1864/1865 8 port chip. this is used in several sbus (sparc) serial boards, as well as an 8 port isa card from riscom. sio16 (sbus) frontend coming shortly. this is heavily based on the com and zs drivers.
2001-10-03 08:25:29 +04:00
# Cirrus Logic CL-CD180/1864/1865 multi port serial controller back-end
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
add a backend serial driver for the cirrus logic CL-CD180/1864/1865 8 port chip. this is used in several sbus (sparc) serial boards, as well as an 8 port isa card from riscom. sio16 (sbus) frontend coming shortly. this is heavily based on the com and zs drivers.
2001-10-03 08:25:29 +04:00
define cd18xx
file dev/ic/cd18xx.c cd18xx
RealTek -> Realtek.
2004-02-13 13:00:54 +03:00
# Realtek 8019/8029 NE2000-compatible network interface subroutines
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define the "rtl80x9" attribute, to pull in code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
1998-10-31 03:43:19 +03:00
define rtl80x9
file dev/ic/rtl80x9.c rtl80x9
Incorporate the changes of RL81x9 driver provided by M. Kanaoka <kanaoka@ann.hi-ho.ne.jp>. He separated the driver into IC specific portion and bus attachment portion and added cardbus attachent.
2000-04-10 11:42:55 +04:00
RealTek -> Realtek.
2004-02-13 13:00:54 +03:00
# Realtek 8129/8139 Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Changes the name of RealTek driver. The new name is `rtk'. This used to be called `rl' and it conflict with RL vax disks, canonical and historical unix driver name. This changes are minimal: it only changes the name of RealTek driver. The filename of source code and a lot of the letter `rl' in source files should be changed shortly.
2000-04-19 12:44:31 +04:00
device rtk: ether, ifnet, arp, mii
Link rtl81x9.c when re* is defined (hi, Toshi!)
2004-05-29 16:12:28 +04:00
file dev/ic/rtl81x9.c rtk | re
Define LSI64854.
1998-08-30 01:52:54 +04:00
Add re(4) RealTek 8139C+/8169/8169S/8110S PCI ethernet adapter driver, from FreeBSD. I haven't tested this code very well, but it seems to work fairly well for me.
2004-05-28 19:35:41 +04:00
# Realtek 8169 Ethernet controllers
#
device re: ether, ifnet, arp, mii
- switch to dev/rtl8169.c from pci/if_re.c. - enable re@cardbus. both of re@pci and re@cardbus seem to work for me.
2005-01-21 15:32:18 +03:00
file dev/ic/rtl8169.c re
Add re(4) RealTek 8139C+/8169/8169S/8110S PCI ethernet adapter driver, from FreeBSD. I haven't tested this code very well, but it seems to work fairly well for me.
2004-05-28 19:35:41 +04:00
Move the `wdc' device into `conf/files'.
1998-11-23 00:57:47 +03:00
# Common code for ESDI/IDE/etc. controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Don't assume wdc-specific ATA / ATAPI code should be brought in if atabus or atapibus are configured; use a separate wdc_common attribute to indicate that the shared wdc code is also present.
2004-08-12 08:23:02 +04:00
define wdc_common
device wdc: ata, wdc_common
Make the ATA mid-layer appears as atabus, as proposed in http://mail-index.netbsd.org/tech-kern/2003/09/25/0006.html This adds a device (atabus) between IDE controllers and wd or atapibus, to have each ATA channel show up in the device tree. Later there will be atabus devices in /dev, so that we can do IOCTL on them. Each atabus has its own kernel thread, to handle operations that needs polling, e.g. reset and others. Device probing on each bus it defered to the atabus thread creation. This allows to do the reset and basic device probes in parallel, which reduce boot time on systems with several pciide controllers.
2003-10-08 14:58:12 +04:00
device<tab> attach<tab> file<tab>
2004-02-14 19:35:58 +03:00
device atabus: atapi,ata_hl
attach atabus at ata
Don't assume wdc-specific ATA / ATAPI code should be brought in if atabus or atapibus are configured; use a separate wdc_common attribute to indicate that the shared wdc code is also present.
2004-08-12 08:23:02 +04:00
file dev/ic/wdc.c atabus & wdc_common
Shuffle wd/wdc driver files around (via repository copies). wdc now lives in dev/ic, wd now lives in dev/ata. there's now a 'ata' interface attribute defined in conf/files, but wdc can't go there yet because some ports still use private versions based on the old ISA version.
1998-01-15 02:36:30 +03:00
"upc" uses "wdc", so put the former after the latter.
2000-08-17 22:56:17 +04:00
# CHIPS and Technologies 82C7[12][01] Universal Peripheral Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
"upc" uses "wdc", so put the former after the latter.
2000-08-17 22:56:17 +04:00
device upc { [offset = -1] }
attach wdc at upc with wdc_upc
attach com at upc with com_upc
cleanup old lpt(4) attachment, and glue ppbus in so that they can coexist: * lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c is included there too; dev/ic/lpt.c is not included if ppbus is configured or if there is alternative platform lpt (like for pc532) * g/c MD lpt definitions and custom puc/upc attachments, glue moved to conf/files and dev/pci/files.pci respectively; remove device lpt definition from dev/isa/files.isa * add ppbus parport attribute, atppc device attachments, adjust plip and lpt glue
2004-01-20 22:58:00 +03:00
attach lpt at upc with lpt_upc
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/upc.c upc
file dev/ic/wdc_upc.c wdc_upc
file dev/ic/com_upc.c com_upc
cleanup old lpt(4) attachment, and glue ppbus in so that they can coexist: * lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c is included there too; dev/ic/lpt.c is not included if ppbus is configured or if there is alternative platform lpt (like for pc532) * g/c MD lpt definitions and custom puc/upc attachments, glue moved to conf/files and dev/pci/files.pci respectively; remove device lpt definition from dev/isa/files.isa * add ppbus parport attribute, atppc device attachments, adjust plip and lpt glue
2004-01-20 22:58:00 +03:00
file dev/ic/lpt_upc.c lpt_upc
"upc" uses "wdc", so put the former after the latter.
2000-08-17 22:56:17 +04:00
Add a placeholder for the ISA WaveLAN card
1999-10-30 01:35:43 +04:00
# Common code for ISA/PCMCIA (non 802.11) WaveLAN adapters
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
forgot one patch. add a define for wavelan
1999-10-30 01:41:19 +04:00
define wavelan
Add a placeholder for the ISA WaveLAN card
1999-10-30 01:35:43 +04:00
device wl: ether, ifnet, arp
file dev/ic/wavelan.c wavelan
This is the long-awaited "new Tulip driver", a complete, from-scratch rewrite of the driver for the DECchip 21x4x Ethernet chips, and a variety of clones. Currently, the driver supports the Winbond 89C840F (this works pretty well), and the Lite-On PNIC (e.g. NetGear PCI boards), however Lite-On support may be broken [I may simply have a busted test board]. Eventually, support for the Macronix and ASIX chips will filter into this driver, and then, slowly, support for the genuine DEC chips, and maybe even the DE-425 EISA model.
1999-09-01 04:32:41 +04:00
# DECchip 21x4x Ethernet controller family, and assorted clones.
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add the mii_bitbang attribute to the elink3 and tlp drivers.
1999-11-19 21:16:13 +03:00
device tlp: arp, ether, ifnet, mii, mii_bitbang
This is the long-awaited "new Tulip driver", a complete, from-scratch rewrite of the driver for the DECchip 21x4x Ethernet chips, and a variety of clones. Currently, the driver supports the Winbond 89C840F (this works pretty well), and the Lite-On PNIC (e.g. NetGear PCI boards), however Lite-On support may be broken [I may simply have a busted test board]. Eventually, support for the Macronix and ASIX chips will filter into this driver, and then, slowly, support for the genuine DEC chips, and maybe even the DE-425 EISA model.
1999-09-01 04:32:41 +04:00
file dev/ic/tulip.c tlp
Add declaration for the Adaptec AIC-6915 64-bit 10/100 Ethernet interface. Note: this is a placeholder right now; the driver should be ready in the next few days.
1999-10-13 22:37:12 +04:00
# Adaptec AIC-6915 Ethernet interface
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add declaration for the Adaptec AIC-6915 64-bit 10/100 Ethernet interface. Note: this is a placeholder right now; the driver should be ready in the next few days.
1999-10-13 22:37:12 +04:00
device sf: arp, ether, ifnet, mii
file dev/ic/aic6915.c sf
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
# Mostek time-of-day clock and NVRAM
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
define mk48txx
`mk48txx' no longer needs a flag.
2002-03-28 14:56:32 +03:00
file dev/ic/mk48txx.c mk48txx
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
# Intersil 7170 time-of-day clock
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
define intersil7170
file dev/ic/intersil7170.c intersil7170
Add entries for the NatSemi MM58167 time-of-day clock chip and the chipset used in the Sun2 "sc" SCSI adapters.
2001-04-20 20:39:22 +04:00
# National Semiconductor MM58167 time-of-day clock
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add entries for the NatSemi MM58167 time-of-day clock chip and the chipset used in the Sun2 "sc" SCSI adapters.
2001-04-20 20:39:22 +04:00
define mm58167
file dev/ic/mm58167.c mm58167
Add MI driver for mc146818 based time-of-day clock with todr(9) support.
2003-10-29 20:00:40 +03:00
# Motorola mc146818 (and compatible) time-of-day clock
#
define mc146818
file dev/ic/mc146818.c mc146818
Config attribute for the DL10019 MII support.
2001-02-13 04:56:28 +03:00
# D-Link DL10019/10022 NE2000-compatible network interface subroutines
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Config attribute for the DL10019 MII support.
2001-02-13 04:56:28 +03:00
define dl10019
file dev/ic/dl10019.c dl10019
MII access routines for ASIX AX88190.
2001-08-04 15:38:57 +04:00
# ASIX AX88190 NE2000-compatible network interface subroutines
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
MII access routines for ASIX AX88190.
2001-08-04 15:38:57 +04:00
define ax88190
file dev/ic/ax88190.c ax88190
Split we(4) driver to bus independant and ISA-specific parts, in preparation for MCA attachment.
2001-03-23 22:08:53 +03:00
# WD/SMC 80x3 family, SMC Elite Ultra [8216], SMC EtherEZ
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Split we(4) driver to bus independant and ISA-specific parts, in preparation for MCA attachment.
2001-03-23 22:08:53 +03:00
device we: ether, ifnet, arp, dp8390nic
file dev/ic/we.c we
Prepare for MCA attachment: * split off sharable stuff to dev/ic/ate_subr.[ch], move ate(4) device definition to conf/files * cosmetic: attach with ate_isa
2001-03-31 04:26:53 +04:00
# Allied-Telesis Ethernet driver based on Fujitsu MB8696xA controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Prepare for MCA attachment: * split off sharable stuff to dev/ic/ate_subr.[ch], move ate(4) device definition to conf/files * cosmetic: attach with ate_isa
2001-03-31 04:26:53 +04:00
device ate: arp, ether, ifnet, mb86960
Overhaul of fmv(4) driver: - Split if_fmv.c into MI/MD part and add ISA-PnP attachment for FMV-183. (XXX FMV-184 is not tested. It would require extra media-select functions..) - Fix probe functions of fmv_isa so that FMV-181A/182A will also match. Fixes port-i386/9476.
2002-10-05 19:16:10 +04:00
# Fujitsu FMV-18x Ethernet driver based on Fujitsu MB8696xA controllers
#
device fmv: arp, ether, ifnet, mb86960
file dev/ic/fmv.c fmv
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 22:17:05 +03:00
# Crystal Semiconductor CS8900, CS8920, and CS8920M Ethernet
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 22:17:05 +03:00
device cs: arp, ether, ifnet
add tscs
2005-01-08 05:56:35 +03:00
device tscs: arp, ether, ifnet
file dev/ic/cs89x0.c cs | tscs
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
# Radio device attributes
#
define tea5757
device<tab> attach<tab> file<tab>
2004-02-14 19:35:58 +03:00
file dev/ic/tea5757.c tea5757
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
define lm700x
device<tab> attach<tab> file<tab>
2004-02-14 19:35:58 +03:00
file dev/ic/lm700x.c lm700x
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 22:17:05 +03:00
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
# Definitions for wscons
# device attributes: display, display with emulator, keyboard, and mouse
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Make the right defaults for kbdmux and mux locators.
2001-12-05 07:05:37 +03:00
define wsdisplaydev {[kbdmux = 1]}
define wsemuldisplaydev {[console = -1], [kbdmux = 1]}
define wskbddev {[console = -1], [mux = 1]}
define wsmousedev {[mux = 0]}
Add support for virtual consoles to igsfb. Works fine on a Krups, needs testing on other ports.
2006-02-23 11:01:59 +03:00
define vcons
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
# attribute to pull in raster support
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
define wsrasteremulops
Put definitions and subroutines needed for all PC display adapters (MGA/GCA and compatibles) into global headers / source files. Let the VGA driver use them.
1998-05-28 20:53:18 +04:00
# common PC display functions
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_pcdisplay.h PCDISPLAY_SOFTCURSOR
whitespace police
2001-02-24 04:34:28 +03:00
define pcdisplayops
Put definitions and subroutines needed for all PC display adapters (MGA/GCA and compatibles) into global headers / source files. Let the VGA driver use them.
1998-05-28 20:53:18 +04:00
file dev/ic/pcdisplay_subr.c pcdisplayops
add new file for pcdisplay mapping tables
1998-06-27 01:01:32 +04:00
file dev/ic/pcdisplay_chars.c pcdisplayops
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
# VGA graphics
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
put the "VGA_CONSOLE_SCREENTYPE" parameter into opt_vga.h
2002-07-07 19:09:52 +04:00
defparam opt_vga.h VGA_CONSOLE_SCREENTYPE
whitespace
2002-06-29 02:32:58 +04:00
defflag opt_vga.h VGA_CONSOLE_ATI_BROKEN_FONTSEL
Add VGA raster graphics console driver. It is written as an extension to char-cell based vga(4) driver, and fully compatible with existing apps like XFree86. Currently it supports 80x25, 80x30, 80x40 and 80x50 text modes using emulation. You can enable it by specifying `options VGA_RASTERCONSOLE' in your kernel config file. Note that displaying multilingual text doesn't work yet. Necessary code is already there, but userland stuff and some functionality isn't ready for prime time yet. I'm working on them.
2002-10-15 22:14:41 +04:00
defflag opt_vga.h VGA_RASTERCONSOLE
Changes to allow machines which don't use text mode at the boot time to use generic VGA driver(s): - Allow VGA drivers to use wsfont instead of builtin font. - Add vga_reset() function, which will be called from MD consinit(), to put VGA into text mode. This function is enabled by options VGA_RESET.
2003-02-01 00:57:23 +03:00
defflag opt_vga.h VGA_RESET
Put definitions and subroutines needed for all PC display adapters (MGA/GCA and compatibles) into global headers / source files. Let the VGA driver use them.
1998-05-28 20:53:18 +04:00
device vga: wsemuldisplaydev, pcdisplayops
Add VGA raster graphics console driver. It is written as an extension to char-cell based vga(4) driver, and fully compatible with existing apps like XFree86. Currently it supports 80x25, 80x30, 80x40 and 80x50 text modes using emulation. You can enable it by specifying `options VGA_RASTERCONSOLE' in your kernel config file. Note that displaying multilingual text doesn't work yet. Necessary code is already there, but userland stuff and some functionality isn't ready for prime time yet. I'm working on them.
2002-10-15 22:14:41 +04:00
file dev/ic/vga.c vga & !vga_rasterconsole needs-flag
file dev/ic/vga_raster.c vga_rasterconsole needs-flag
file dev/ic/vga_subr.c vga | vga_rasterconsole
file dev/ic/vga_common.c vga | vga_rasterconsole
Add (unfinished) igsfb driver. While here g/c stale cprofb entry, it's not in the tree and I plan to support CyberPro cards with igsfb driver eventually (where is my netwinder?)
2002-03-30 23:21:21 +03:00
# Integraphics Systems IGA168x and CyberPro framebuffers (linear non-VGA mode)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add support for virtual consoles to igsfb. Works fine on a Krups, needs testing on other ports.
2006-02-23 11:01:59 +03:00
device igsfb: wsemuldisplaydev, wsrasteremulops, rasops8, vcons
igsfb needs-flag.
2003-06-03 02:51:49 +04:00
file dev/ic/igsfb.c igsfb needs-flag
Add some preliminary support for setting up the CyberPro in Netwinder. Setup sequence obtained from Krups OFW with some CyberPro-specific magic from Linux driver. The driver still has a lot of hardcoded stuff, but it is useful enough to bring up wscons on netwinder. XXX: Proper console attachment needs to be written (the driver was originally developed on sparc, where our approach to attaching console is totally different). Caveat emptor!
2002-09-24 22:17:24 +04:00
file dev/ic/igsfb_subr.c igsfb
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
Import STI wscons(4) driver from OpenBSD and add new driver for PS/2 keyboard / mouse pots of LASI.
2004-08-26 20:48:06 +04:00
# STI (hp graphics)
device sti: wsemuldisplaydev
file dev/ic/sti.c sti & (sti_pci | sti_sgc | sti_phantom)
Move eisabus, tcbus attributes here. Attributes that "machine-independent" bus support want to attach to should be declared in conf/files, so that hairy ordering constraints on the inclusions of busses' "files" files in files.{MACHINE} are avoided. isabus, pcibus attributes will go here later. The problem is, for instance, that there are some devices in files.isa currently which require that 'pci' be defined, but there are some PCI devices (e.g. 'sio' on the Alpha) that provide isabus interfaces, i.e. 'isa' busses attach to them. Unless the the bus-attachment attributes are here, it's impossible to declare the busses' files and attribute dependencies in a machine-independent way.
1996-02-28 00:59:14 +03:00
# Attributes which machine-independent bus support can be attached to.
# These should be defined here, because some of these busses can have
# devices which provide these attributes, and we'd like to avoid hairy
# ordering constraints on inclusion of the busses' "files" files.
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
define isabus { } # ISA attachment
define eisabus { } # EISA attachment
define pcibus {[bus = -1]} # PCI attachment
define tcbus { } # TurboChannel attachment
define mcabus { } # MicroChannel attachment
define usbus { } # USB attachment
ieee1394 import from FreeBSD.
2005-07-11 19:29:05 +04:00
define fwbus { } # IEEE 1394 attachment
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
define vmebus { } # VME bus attachment
define acpibus { } # ACPI "bus" attachment
Define `pcmciabus'.
1998-11-26 18:31:22 +03:00
define pcmciabus { [controller = -1], [socket = -1]} # PCMCIA bus attachment
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
define cbbus {[slot = -1]} # CardBus attachment
define pcmciaslot {[slot = -1]} # PCMCIA slot itself
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# We need the USB bus controllers here so different busses can
# use them in an 'attach-with'.
# UHCI USB controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
defparam USB_MEM_RESERVE
2004-12-21 19:36:53 +03:00
defparam USB_MEM_RESERVE
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
device uhci: usbus
whitespace police
2001-02-24 04:34:28 +03:00
file dev/usb/uhci.c uhci needs-flag
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# OHCI USB controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
device ohci: usbus
whitespace police
2001-02-24 04:34:28 +03:00
file dev/usb/ohci.c ohci needs-flag
Move eisabus, tcbus attributes here. Attributes that "machine-independent" bus support want to attach to should be declared in conf/files, so that hairy ordering constraints on the inclusions of busses' "files" files in files.{MACHINE} are avoided. isabus, pcibus attributes will go here later. The problem is, for instance, that there are some devices in files.isa currently which require that 'pci' be defined, but there are some PCI devices (e.g. 'sio' on the Alpha) that provide isabus interfaces, i.e. 'isa' busses attach to them. Unless the the bus-attachment attributes are here, it's impossible to declare the busses' files and attribute dependencies in a machine-independent way.
1996-02-28 00:59:14 +03:00
Add some placeholders for the EHCI (USB 2) driver. Don't get your hopes up. I've not even finished reading the (100+) page spec, and I have no hardware.
2000-12-24 09:39:01 +03:00
# EHCI USB controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add some placeholders for the EHCI (USB 2) driver. Don't get your hopes up. I've not even finished reading the (100+) page spec, and I have no hardware.
2000-12-24 09:39:01 +03:00
device ehci: usbus
whitespace police
2001-02-24 04:34:28 +03:00
file dev/usb/ehci.c ehci needs-flag
Add some placeholders for the EHCI (USB 2) driver. Don't get your hopes up. I've not even finished reading the (100+) page spec, and I have no hardware.
2000-12-24 09:39:01 +03:00
Add driver for ScanLogic SL811HS/T USB Host Controller. XXX It's experimental code yet. For x68k: USB part of Nereid USB/Ethernet/memory board For ISA: ISA USB Host board from Morphy planning
2002-08-11 17:17:52 +04:00
# SL811HS/T USB controller
nuke trailing whitespace
2005-02-27 01:58:54 +03:00
defflag opt_slhci.h SLHCI_DEBUG
Add driver for ScanLogic SL811HS/T USB Host Controller. XXX It's experimental code yet. For x68k: USB part of Nereid USB/Ethernet/memory board For ISA: ISA USB Host board from Morphy planning
2002-08-11 17:17:52 +04:00
device slhci: usbus
file dev/ic/sl811hs.c slhci needs-flag
Add a driver for the Myson Technology MTD803 3-in-1 Fast Ethernet Controller, provided by Peter Bex in PR 18675.
2002-11-08 00:56:56 +03:00
# Myson MTD803 3-in-1 Fast Ethernet Controller
device mtd: arp, ether, ifnet, mii
file dev/ic/mtd803.c mtd
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
# radio devices, attaches to radio hardware driver
device radio
"attach radio at radio": using one word as both attribute and device doesn't work well, radio.c is pulled in even with no such device in the configuration, and the kernel doesn't link due to missing "radio_cd". So call the attribute "radiodev" to avoid confusion.
2002-01-07 20:44:42 +03:00
attach radio at radiodev
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
Add a fwlynx device. Move the file for fwohci to files.ieee1394
2000-11-15 02:37:20 +03:00
# IEEE 1394 controllers
# (These need to be here since it will have both PCI and CardBus attachments)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add IEEE 1394 OHCI node and IEEE 1394 bus. Just placeholders for now.
2000-05-30 04:48:47 +04:00
device fwohci: fwbus
Add spic.
2002-04-22 17:03:06 +04:00
# Sony Programmable I/O Controller
device spic: wsmousedev
file dev/ic/spic.c spic
Add stuff for the CPC700.
2002-05-21 07:01:02 +04:00
# IBM CPC700 PowerPC bridge
define cpcbus { addr, [irq=-1] }
device cpc: cpcbus, pcibus
file dev/ic/cpc700.c cpc
attach com at cpcbus with com_cpcbus
file dev/ic/com_cpcbus.c com_cpcbus
device cpctim
attach cpctim at cpcbus
file dev/ic/timer_cpcbus.c cpctim
Rename a cpc device.
2002-05-21 07:05:00 +04:00
device cpciic
attach cpciic at cpcbus with iic_cpcbus
Add stuff for the CPC700.
2002-05-21 07:01:02 +04:00
file dev/ic/iic_cpcbus.c iic_cpcbus
Define a bpf_filter attribute, and include bpf_filter.o when we have it. Give the attribute to things which need to use the BPF virtual machine.
2000-12-29 03:54:58 +03:00
# Attribute used by various things that need BPF's virtual machine
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define a bpf_filter attribute, and include bpf_filter.o when we have it. Give the attribute to things which need to use the BPF virtual machine.
2000-12-29 03:54:58 +03:00
define bpf_filter
defparam BPF_BUFSIZE
2002-06-07 03:54:47 +04:00
defparam opt_bpf.h BPF_BUFSIZE
Define a bpf_filter attribute, and include bpf_filter.o when we have it. Give the attribute to things which need to use the BPF virtual machine.
2000-12-29 03:54:58 +03:00
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# Attributes used by the ISDN subsystem
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
define isdndev # the ISDN subsystem
Wrap long lines.
2001-09-13 09:19:53 +04:00
define passive_isdn # files needed by passive cards (XXX - protocol
# specific)
autoconf goop for iavc
2003-09-25 19:58:14 +04:00
define isdncapi # ISDN CAPI (http://www.capi.org/)
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
Fritz!PCI v2.0 ISDN driver from FreeBSD.
2002-10-26 01:03:47 +04:00
# The isac found on the Fritz V2.0 Card.
define nisacsx
file dev/ic/isacsx.c nisacsx needs-flag
# The 'standard' isac
define nisac
file dev/ic/isac.c nisac needs-flag
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# ISDN cards based on the Siemens ISAC/HSCX chipset (or lookalikes)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Fritz!PCI v2.0 ISDN driver from FreeBSD.
2002-10-26 01:03:47 +04:00
device isic: isdndev, passive_isdn, nisac
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/isic.c isic
Fritz!PCI v2.0 ISDN driver from FreeBSD.
2002-10-26 01:03:47 +04:00
file dev/ic/isic_l1.c isic|ifpci|ifritz
file dev/ic/isic_l1fsm.c isic|ifpci|ifritz
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/hscx.c isic
file dev/ic/isic_bchan.c isic
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# (old) Diehl active ISDN cards
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
device daic: isdndev
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/daic.c daic
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
autoconf goop for iavc
2003-09-25 19:58:14 +04:00
# AWM B1/T1
# XXX: passive_isdn
device iavc: isdndev, isdncapi, passive_isdn
file dev/ic/iavc.c iavc
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# legitimate pseudo-devices
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Have vnd(4) devices automatically created when the user tries to configure one. That removes the compile-time constant that limits the number of vnds. Thanks xtraeme@ for testing.
2006-02-01 06:15:33 +03:00
defpseudo vnd { }: disk
Add support for reading cloop2 compressed filesystem image, enable by putting VND_COMPRESSION into kernel config file. Written by Cliff Wright, polished up slightly by me.
2005-07-17 04:08:27 +04:00
defflag opt_vnd.h VND_COMPRESSION
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defpseudo ccd: disk
* Move config defns for the crypto algorithms into their own files. Define an attribute for each crypto algorithm, and use that attribute to select the files that implement the algorithm. * Give the "wlan" attribute a dependency on the "arc4" attribute. * Give the "cgd" pseudo-device the "des", "blowfish", "cast128", and "rijndael" attributes. * Use the new attribute-as-option-dependencies feature of config(8) to give the IPSEC_ESP option dependencies on the "des", "blowfish", "cast128", and "rijndael" attributes.
2002-10-11 05:52:04 +04:00
defpseudo cgd: disk, des, blowfish, cast128, rijndael
Fix md(4) like raid(4) was fixed.
2006-03-02 01:12:09 +03:00
defpseudo md { }: disk
The file system snapshot pseudo driver. Uses a hook in spec_strategy() to save data written from a mounted file system to its block device and a hook in dounmount(). Not enabled by default in any kernel config. Approved by: Frank van der Linden <fvdl@netbsd.org>
2003-12-10 14:40:11 +03:00
defpseudo fss: disk
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 04:05:28 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defpseudo pty: tty
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 04:05:28 +04:00
defpseudo rnd
Include kern_ksyms if ksyms | ddb | lkm. Never include db_elf.c.
2003-04-25 00:04:03 +04:00
defpseudo ksyms
Introduce null console. This pseudo device acts as a normal console with the exception that it discards any output, and is useful for booting the kernel on headless boxes.
2003-10-17 22:16:42 +04:00
defpseudo nullcons
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 04:05:28 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defpseudo loop: ifnet
defpseudo sl: ifnet
defpseudo ppp: ifnet, bpf_filter
defpseudo pppoe: ifnet, ether, sppp
defpseudo sppp: ifnet
defpseudo tun: ifnet
defpseudo vlan: ifnet, ether
defpseudo bridge: ifnet, ether
defpseudo bpfilter: ifnet, bpf_filter
defpseudo strip: ifnet
defpseudo gre: ifnet
defpseudo gif: ifnet
defpseudo faith: ifnet
defpseudo stf: ifnet
tap(4) depends on arp: it is an Ethernet interface, after all. Solves PR 32548 by Pawel Chwalowski.
2006-01-17 01:49:23 +03:00
defpseudo tap { }: ifnet, ether, arp, bpf_filter
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 04:05:28 +04:00
defpseudo sequencer
Added the clockctl pseudodevice driver
2001-09-16 11:33:31 +04:00
defpseudo clockctl
Aded missing irix_keme pseudodevice declaration
2002-03-24 20:09:26 +03:00
defpseudo irix_kmem
Added IRIX /dev/usema and dev/usemaclone (void driver for now, will be filled later)
2002-04-23 10:48:46 +04:00
defpseudo irix_usema
Add MIDI support. The MIDI devices can be accessed as ``raw'' through the /dev/rmidiN devices, or with a sequencer interface via /dev/music. So far the only supported MIDI device is the MPU401 port on SoundBlaster (and only on SB on isapnp, since we do not have locators with multiple values yet).
1998-08-07 04:00:55 +04:00
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# ISDN userland pseudo devices
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
defpseudo isdntrc: isdndev, tty
defpseudo isdnbchan: isdndev, tty
defpseudo isdntel: isdndev, tty
defpseudo isdnctl: isdndev, tty
defpseudo isdn: isdndev, tty
# ISDN network interfaces
defpseudo irip: isdndev, ifnet
Rename the IPR_VJ option into IRIP_VJ (as irip(4) told all the time), create an opt_ header and make the dependency on slcompress.c more exact. (OK by martin)
2003-04-11 18:45:27 +04:00
defflag opt_irip.h IRIP_VJ
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
defpseudo ippp: isdndev, sppp, ifnet
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
This is the "kttcp" network throughput testing pseudo-device. From the block comment at the top of the file: This module provides kernel support for testing network throughput from the perspective of the kernel. It is similar in spirit to the classic ttcp network benchmark program, the main difference being that with kttcp, the kernel is the source and sink of the data. Testing like this is useful for a few reasons: 1. This allows us to know what kind of performance we can expect from network applications that run in the kernel space, such as the NFS server or the NFS client. These applications don't have to move the data to/from userspace, and so benchmark programs which run in userspace don't give us an accurate model. 2. Since data received is just thrown away, the receiver is very fast. This can provide better exercise for the sender at the other end. 3. Since the NetBSD kernel currently uses a run-to-completion scheduling model, kttcp provides a benchmark model where preemption of the benchmark program is not an issue. There is a companion "kttcp" user program which uses the kttcp pseudo-device. Largely written by Frank van der Linden, with some modifications from me.
2002-06-29 03:27:13 +04:00
# KTTCP network throughput testing pseudo-device
defpseudo kttcp
file dev/kttcp.c kttcp needs-flag
Added support for fingerprinted executables aka verified exec
2002-10-29 15:31:20 +03:00
# Verified exec fingerprint loader pseudo-device
Rototill of the verified exec functionality. * We now use hash tables instead of a list to store the in kernel fingerprints. * Fingerprint methods handling has been made more flexible, it is now even simpler to add new methods. * the loader no longer passes in magic numbers representing the fingerprint method so veriexecctl is not longer kernel specific. * fingerprint methods can be tailored out using options in the kernel config file. * more fingerprint methods added - rmd160, sha256/384/512 * veriexecctl can now report the fingerprint methods supported by the running kernel. * regularised the naming of some portions of veriexec.
2005-04-20 17:44:45 +04:00
defpseudo veriexec
file kern/kern_verifiedexec.c veriexec needs-flag
file dev/verified_exec.c veriexec needs-flag
Added support for fingerprinted executables aka verified exec
2002-10-29 15:31:20 +03:00
New Feature: add pseudo device for IEEE 1394 isochronous stream and isochronous reception routine for IEEE 1394 OHCI (fwohci). The transmission part is under construction. The minimum configuration options for this feature are: # IEEE 1394 (i.LINK) fwohci* at pci? dev ? function ? pseudo-device fwiso 1
2002-12-04 03:28:39 +03:00
# isochronous pseudo device for IEEE 1394, i.LINK or FireWire
defpseudo fwiso: ieee1394
add a "drvctl" pseudo-device as userland interface to the autoconf rescan() and detach() functions
2004-08-18 16:19:29 +04:00
# driver attach / detach user interface
defpseudo drvctl
file kern/kern_drvctl.c drvctl
Cleanup how file system configuration information is declared, grouping related information together, with the file system code itself. This is just low-hanging fruit -- more to come.
2002-04-17 03:14:05 +04:00
#
# File systems
#
include "coda/files.coda"
ptyfs moved from miscfs/ to fs/ sort file system includes
2004-11-11 22:21:46 +03:00
include "fs/adosfs/files.adosfs"
include "fs/cd9660/files.cd9660"
move filecorefs code from sys/filecorefs to sys/fs/filecorefs
2002-12-23 20:30:36 +03:00
include "fs/filecorefs/files.filecorefs"
ptyfs moved from miscfs/ to fs/ sort file system includes
2004-11-11 22:21:46 +03:00
include "fs/msdosfs/files.msdosfs"
include "fs/ntfs/files.ntfs"
include "fs/ptyfs/files.ptyfs"
Initial import of a UDF file system implementation for NetBSD. Finally the logic glue and the set distribution lists modifications.
2006-02-02 18:26:32 +03:00
include "fs/udf/files.udf"
Cleanup how file system configuration information is declared, grouping related information together, with the file system code itself. This is just low-hanging fruit -- more to come.
2002-04-17 03:14:05 +04:00
include "fs/smbfs/files.smbfs"
Add preliminary support for System V Boot File System. Written by UCHIYAMA Yasushi <uch@netbsd>.
2005-12-29 17:53:45 +03:00
include "fs/sysvbfs/files.sysvbfs"
Initial addition of tmpfs, an efficient memory file-system. This project was developed as part of Google's Summer of Code 2005 program. This change adds the kernel code, the mount_tmpfs utility, a regression test suite and does all other related changes to integrate these. The file-system is still *experimental*. Therefore, it is disabled by default in all kernels. However, as typically done, a commented-out entry is added in them to ease its setup. Note that I haven't commited the required mountd(8) changes to be able to export tmpfs file-systems because NFS support is still very unstable and because, before enabling it, I'd like to do some other changes. OK'ed by my project mentor, William Studenmund (wrstuden@).
2005-09-10 23:20:48 +04:00
include "fs/tmpfs/files.tmpfs"
ptyfs moved from miscfs/ to fs/ sort file system includes
2004-11-11 22:21:46 +03:00
include "fs/union/files.union"
Cleanup how file system configuration information is declared, grouping related information together, with the file system code itself. This is just low-hanging fruit -- more to come.
2002-04-17 03:14:05 +04:00
include "miscfs/fdesc/files.fdesc"
include "miscfs/kernfs/files.kernfs"
include "miscfs/nullfs/files.nullfs"
include "miscfs/overlay/files.overlay"
include "miscfs/portal/files.portal"
include "miscfs/procfs/files.procfs"
include "miscfs/umapfs/files.umapfs"
include "nfs/files.nfs"
include "ufs/files.ufs"
Move UVM files to files.uvm
2005-11-28 01:18:41 +03:00
#
# UVM (virtual memory)
#
include "uvm/files.uvm"
Cleanup how file system configuration information is declared, grouping related information together, with the file system code itself. This is just low-hanging fruit -- more to come.
2002-04-17 03:14:05 +04:00
#
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# kernel sources
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
file dev/auconv.c auconv | mulaw
whitespace police
2001-02-24 04:34:28 +03:00
file dev/audio.c audio | midi | midibus needs-flag
Simple code to provide a console bell through a generic audio device, for systems that don't have a dedicated feeper. It's up to MD code to enable this by having the "audiobell" attribute and calling audiobell() at the appropriate moment. Code for making noise in the kernel from Richard Earnshaw. Simple synthesizer design from the RISC OS Programmer's Reference manual.
2004-01-17 23:55:59 +03:00
file dev/audiobell.c audiobell
add `needs-flag' to the file line for mulaw. move the file line for aurateconv.
2004-11-13 10:58:14 +03:00
file dev/aurateconv.c aurateconv needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ccd.c ccd needs-flag
add in the cgd.
2002-10-04 22:25:51 +04:00
file dev/cgd.c cgd needs-flag
file dev/cgd_crypto.c cgd
Since everyone uses clock_subr.c (or should, if they don't currently), list it in conf/files instead of in every port's files.*.
2003-07-27 05:17:37 +04:00
file dev/clock_subr.c
order dev/clockctl.c appropriately
2002-01-15 15:10:50 +03:00
file dev/clockctl.c clockctl needs-flag
add block device driver
2004-04-17 16:56:26 +04:00
file dev/dksubr.c cgd | xbd
Move wedge code to a subdirectory, as suggested by Christos.
2004-10-04 05:07:25 +04:00
file dev/dkwedge/dk.c
Add a parsing module for 4.4BSD/NetBSD disklabels. This module supports disklabels nested inside an MBR "NetBSD" or "386BSD" partition (first one found is considered authoritative for the disk), or in one of several known locations for various NetBSD platforms. It can read native or other- endian disklabels (code is there, but not tested). If you want to play with this, exercise caution; you can't currently mountroot on a wedge (setroot() needs some work). Enabled by the DKWEDGE_METHOD_BSDLABEL kernel option.
2004-10-04 05:16:39 +04:00
file dev/dkwedge/dkwedge_bsdlabel.c dkwedge_method_bsdlabel
Move wedge code to a subdirectory, as suggested by Christos.
2004-10-04 05:07:25 +04:00
file dev/dkwedge/dkwedge_gpt.c dkwedge_method_gpt
MBR partition table support for wedges, enabled by the DKWEDGE_METHOD_MBR option.
2004-10-23 21:25:14 +04:00
file dev/dkwedge/dkwedge_mbr.c dkwedge_method_mbr
Conditionalize firmload.c on the firmload attribute.
2006-01-17 09:52:43 +03:00
file dev/firmload.c firmload
The file system snapshot pseudo driver. Uses a hook in spec_strategy() to save data written from a mounted file system to its block device and a hook in dounmount(). Not enabled by default in any kernel config. Approved by: Frank van der Linden <fvdl@netbsd.org>
2003-12-10 14:40:11 +03:00
file dev/fss.c fss needs-count
whitespace police
2001-02-24 04:34:28 +03:00
file dev/md.c md needs-count
file dev/midi.c midi | midibus needs-flag
file dev/midisyn.c midisyn
Add mm.c
2002-02-27 04:16:30 +03:00
file dev/mm.c
add `needs-flag' to the file line for mulaw. move the file line for aurateconv.
2004-11-13 10:58:14 +03:00
file dev/mulaw.c mulaw needs-flag
Introduce null console. This pseudo device acts as a normal console with the exception that it discards any output, and is useful for booting the kernel on headless boxes.
2003-10-17 22:16:42 +04:00
file dev/nullcons_subr.c nullcons needs-flag
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
file dev/radio.c radio needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file dev/rnd.c rnd needs-flag
file dev/rndpool.c rnd needs-flag
file dev/sequencer.c sequencer needs-flag
file dev/vnd.c vnd needs-flag
- defflag bufq_fcfs and bufq_disksort. - make them on by default.
2005-09-26 18:14:26 +04:00
file kern/bufq_disksort.c bufq_disksort
file kern/bufq_fcfs.c bufq_fcfs
lookup bufq using link_set rather than a switch statement.
2004-11-25 07:52:23 +03:00
file kern/bufq_priocscan.c bufq_priocscan
file kern/bufq_readprio.c bufq_readprio | new_bufq_strategy
Build core_elf32.c if EXEC_ELF32. Build core_elf64.c if EXEC_ELF64.
2001-12-10 02:18:09 +03:00
file kern/core_elf32.c exec_elf32
file kern/core_elf64.c exec_elf64
Reduce INSTALL_TINY by 1.3KB. Support for a.out coredumps is now conditional on EXEC_AOUT, EXEC_COFF, EXEC_ECOFF, or EXEC_MACHO, or LKM. Since coredump_netbsd is the only user of cpu_coredump, make that conditional too. Lastly, add 'no options EXEC_AOUT' so the EXEC_AOUT option in std.i386 can be overridden.
2005-06-12 04:24:32 +04:00
file kern/core_netbsd.c exec_aout | exec_coff | exec_ecoff |
exec_macho | lkm
whitespace police
2001-02-24 04:34:28 +03:00
file kern/cnmagic.c
file kern/exec_aout.c exec_aout
file kern/exec_conf.c
file kern/exec_ecoff.c exec_ecoff
file kern/exec_elf32.c exec_elf32
file kern/exec_elf64.c exec_elf64
add macho glue
2001-07-14 06:05:54 +04:00
file kern/exec_macho.c exec_macho
whitespace police
2001-02-24 04:34:28 +03:00
file kern/exec_script.c exec_script
file kern/exec_subr.c
file kern/init_main.c
Dynamic sysctl. Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(), vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all nodes are registered with the tree, and nodes can be added (or removed) easily, and I/O to and from the tree is handled generically. Since the nodes are registered with the tree, the mapping from name to number (and back again) can now be discovered, instead of having to be hard coded. Adding new nodes to the tree is likewise much simpler -- the new infrastructure handles almost all the work for simple types, and just about anything else can be done with a small helper function. All existing nodes are where they were before (numerically speaking), so all existing consumers of sysctl information should notice no difference. PS - I'm sorry, but there's a distinct lack of documentation at the moment. I'm working on sysctl(3/8/9) right now, and I promise to watch out for buses.
2003-12-04 22:38:21 +03:00
file kern/init_sysctl.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/init_sysent.c
file kern/kern_acct.c
integrate kauth.
2006-05-15 01:19:33 +04:00
file kern/kern_auth.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_clock.c
file kern/kern_descrip.c
merge kqueue branch into -current kqueue provides a stateful and efficient event notification framework currently supported events include socket, file, directory, fifo, pipe, tty and device changes, and monitoring of processes and signals kqueue is supported by all writable filesystems in NetBSD tree (with exception of Coda) and all device drivers supporting poll(2) based on work done by Jonathan Lemon for FreeBSD initial NetBSD port done by Luke Mewburn and Jason Thorpe
2002-10-23 13:10:23 +04:00
file kern/kern_event.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_exec.c
file kern/kern_exit.c
file kern/kern_fork.c
Make kernel continuations optional for now.
2004-03-29 02:43:56 +04:00
file kern/kern_kcont.c kcont
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_kthread.c
file kern/kern_ktrace.c
Include kern_ksyms if ksyms | ddb | lkm. Never include db_elf.c.
2003-04-25 00:04:03 +04:00
file kern/kern_ksyms.c ksyms | ddb | lkm needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_lkm.c lkm
file kern/kern_lock.c
Merge the nathanw_sa branch.
2003-01-18 11:51:40 +03:00
file kern/kern_lwp.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_malloc.c
Artur Grabowski's simple brute-force malloc debugger, which uses guard pages. Can only debug one malloc type at a time, and nothing larger than 1 page. But can be useful for debugging certain types of "data modified on freelist" type problems. Modified from code in OpenBSD.
2001-08-17 04:48:29 +04:00
file kern/kern_malloc_debug.c malloc_debug
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_ntptime.c
file kern/kern_physio.c
file kern/kern_proc.c
file kern/kern_prot.c
add kern_ras.c
2002-08-28 11:19:58 +04:00
file kern/kern_ras.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_resource.c
Merge the nathanw_sa branch.
2003-01-18 11:51:40 +03:00
file kern/kern_sa.c
Move securelevel-specific stuff to its own file.
2006-04-17 07:39:39 +04:00
file kern/kern_securelevel.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_sig.c
Make kernel continuations optional for now.
2004-03-29 02:43:56 +04:00
file kern/kern_systrace.c systrace
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_subr.c
file kern/kern_synch.c
file kern/kern_sysctl.c
file kern/kern_time.c
New callout implementation. This is based on callwheel implementation done by Artur Grabowski and Thomas Nordin for OpenBSD, which is more efficient in several ways than the callwheel implementation that it is replacing. It has been adapted to our pre-existing callout API, and also provides the slightly more efficient (and much more intuitive) API (adapted to the callout_*() naming scheme) that the OpenBSD version provides. Among other things, this shaves a bunch of cycles off rescheduling-in- the-future a callout which is already scheduled, which the common case for TCP timers (notably REXMT and KEEP). The API has been simplified a bit, as well. The (very confusing to a good many people) "ACTIVE" state for callouts has gone away. There is now only "PENDING" (scheduled to fire in the future) and "EXPIRED" (has fired, and the function called). Kernel version bump not done; we'll ride the 1.6N bump that happened with the malloc(9) change.
2003-02-04 04:21:03 +03:00
file kern/kern_timeout.c
uuidgen(2) syscall. Originally from FreeBSD, ported by John Franklin in PR#23470, with minor updates by me. This is only the syscall support from that PR, for now. Changes: port over fix from FreeBSD for multicast address generation. Changed bcopy to memcpy. For now, #ifdef notyet the portions of kern_uuid.c that are meant to be used by (currently nonexistent) other things in the kernel. Added syscall to COMPAT_FREEBSD as well, though that's currently not useful, as any program new enough to use this call also uses other syscalls we don't (yet) emulate.
2004-01-29 05:00:02 +03:00
file kern/kern_uuid.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_xxx.c
file kern/kgdb_stub.c kgdb
file kern/subr_autoconf.c
make VMSWAP optional again.
2005-09-17 18:38:38 +04:00
file kern/subr_blist.c vmswap
- change the way to specify a bufq strategy. (by string rather than by number) - rather than embedding bufq_state in driver softc, have a pointer to the former. - move bufq related functions from kern/subr_disk.c to kern/subr_bufq.c. - rename method to strategy for consistency. - move some definitions which don't need to be exposed to the rest of kernel from sys/bufq.h to sys/bufq_impl.h. (is it better to move it to kern/ or somewhere?) - fix some obvious breakage in dev/qbus/ts.c. (not tested)
2005-10-15 21:29:10 +04:00
file kern/subr_bufq.c
Merge the gehenna-devsw branch into the trunk. This merge changes the device switch tables from static array to dynamically generated by config(8). - All device switches is defined as a constant structure in device drivers. - The new grammer ``device-major'' is introduced to ``files''. device-major <prefix> char <num> [block <num>] [<rules>] - All device major numbers must be listed up in port dependent majors.<arch> by using this grammer. - Added the new naming convention. The name of the device switch must be <prefix>_[bc]devsw for auto-generation of device switch tables. - The backward compatibility of loading block/character device switch by LKM framework is broken. This is necessary to convert from block/character device major to device name in runtime and vice versa. - The restriction to assign device major by LKM is completely removed. We don't need to reserve LKM entries for dynamic loading of device switch. - In compile time, device major numbers list is packed into the kernel and the LKM framework will refer it to assign device major number dynamically.
2002-09-06 17:18:43 +04:00
file kern/subr_devsw.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/subr_disk.c
Make i/o statistics collection more generic, include tape drives and nfs mounts in the set of devices that statistics will be reported on.
2006-04-14 17:09:05 +04:00
file kern/subr_iostat.c
split off the evcnt code (which is unrelated to autoconfiguration) into a separate file approved by simonb@
2004-02-17 08:03:15 +03:00
file kern/subr_evcnt.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/subr_extent.c
file kern/subr_log.c
file kern/subr_pool.c
file kern/subr_prf.c
file kern/subr_prof.c
physio: make requests with large buffers faster, by queueing more i/o simultaneously.
2005-10-29 15:23:19 +04:00
file kern/subr_once.c
Implement options string parsing of the form 'a=b c=d ...'. This will be initially used by i386's Multiboot support but will be useful in other situations too (think refactoring mount(2)'s API).
2006-02-03 14:04:46 +03:00
file kern/subr_optstr.c
In-kernel device configuration manager - allows modification of device locators at run-time. Written by Mats O Jansson <moj@stacken.kth.se>. Reworked by Jun-ichiro itojun Hagino <itojun@netbsd.org>.
2001-07-01 06:56:20 +04:00
file kern/subr_userconf.c userconf
physio: make requests with large buffers faster, by queueing more i/o simultaneously.
2005-10-29 15:23:19 +04:00
file kern/subr_workqueue.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/subr_xxx.c
file kern/sys_generic.c
Switch default for pipes to the faster John S. Dyson's implementation. Old, socketpair-based ones are available with option PIPE_SOCKETPAIR.
2002-02-11 21:11:41 +03:00
file kern/sys_pipe.c !pipe_socketpair
Implement pmc(9) -- An interface to hardware performance monitoring counters. These counters do not exist on all CPUs, but where they do exist, can be used for counting events such as dcache misses that would otherwise be difficult or impossible to instrument by code inspection or hardware simulation. pmc(9) is meant to be a general interface. Initially, the Intel XScale counters are the only ones supported.
2002-08-07 09:14:47 +04:00
file kern/sys_pmc.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/sys_process.c
file kern/sys_socket.c
file kern/syscalls.c syscall_debug
file kern/sysv_ipc.c sysvshm | sysvsem | sysvmsg
file kern/sysv_msg.c sysvmsg
file kern/sysv_sem.c sysvsem
file kern/sysv_shm.c sysvshm
file kern/tty.c
file kern/tty_conf.c
Update to the split pty driver.
2004-11-10 20:26:16 +03:00
file kern/tty_bsdpty.c compat_bsdpty
ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM
2004-06-18 19:02:29 +04:00
file kern/tty_pty.c pty needs-flag
Update to the split pty driver.
2004-11-10 20:26:16 +03:00
file kern/tty_ptm.c pty
whitespace police
2001-02-24 04:34:28 +03:00
file kern/tty_subr.c
file kern/tty_tty.c
file kern/uipc_domain.c
file kern/uipc_mbuf.c
file kern/uipc_mbuf2.c
file kern/uipc_proto.c
add support for p1003.1b semaphores. From FreeBSD.
2003-01-20 23:02:01 +03:00
file kern/uipc_sem.c p1003_1b_semaphore
whitespace police
2001-02-24 04:34:28 +03:00
file kern/uipc_socket.c
file kern/uipc_socket2.c
file kern/uipc_syscalls.c
file kern/uipc_usrreq.c
file kern/vfs_bio.c
file kern/vfs_cache.c
file kern/vfs_getcwd.c
Apply the NFS exports list rototill patch: - Remove all NFS related stuff from file system specific code. - Drop the vfs_checkexp hook and generalize it in the new nfs_check_export function, thus removing redundancy from all file systems. - Move all NFS export-related stuff from kern/vfs_subr.c to the new file sys/nfs/nfs_export.c. The former was becoming large and its code is always compiled, regardless of the build options. Using the latter, the code is only compiled in when NFSSERVER is enabled. While doing this, also make some functions in nfs_subs.c conditional to NFSSERVER. - Add a new command in nfssvc(2), called NFSSVC_SETEXPORTSLIST, that takes a path and a set of export entries. At the moment it can only clear the exports list or append entries, one by one, but it is done in a way that allows setting the whole set of entries atomically in the future (see the comment in mountd_set_exports_list or in doc/TODO). - Change mountd(8) to use the nfssvc(2) system call instead of mount(2) so that it becomes file system agnostic. In fact, all this whole thing was done to remove a 'XXX' block from this utility! - Change the mount*, newfs and fsck* userland utilities to not deal with NFS exports initialization; done internally by the kernel when initializing the NFS support for each file system. - Implement an interface for VFS (called VFS hooks) so that several kernel subsystems can run arbitrary code upon receipt of specific VFS events. At the moment, this only provides support for unmount and is used to destroy NFS exports lists from the file systems being unmounted, though it has room for extension. Thanks go to yamt@, chs@, thorpej@, wrstuden@ and others for their comments and advice in the development of this patch.
2005-09-23 16:10:31 +04:00
file kern/vfs_hooks.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/vfs_init.c
file kern/vfs_lockf.c
file kern/vfs_lookup.c
file kern/vfs_subr.c
file kern/vfs_syscalls.c
file kern/vfs_vnops.c
Move VFS extended attribute support to its own file.
2005-07-09 05:05:23 +04:00
file kern/vfs_xattr.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/vnode_if.c
file miscfs/deadfs/dead_vnops.c
file miscfs/fifofs/fifo_vnops.c
file miscfs/genfs/genfs_vnops.c
file miscfs/genfs/layer_subr.c nullfs | overlay | umapfs | lkm
file miscfs/genfs/layer_vfsops.c nullfs | overlay | umapfs | lkm
file miscfs/genfs/layer_vnops.c nullfs | overlay | umapfs | lkm
file miscfs/specfs/spec_vnops.c
file miscfs/syncfs/sync_subr.c
file miscfs/syncfs/sync_vnops.c
Clonify bpf. I am not changing /dev/bpfX -> /dev/bpf until all userland programs have been fixed.
2004-11-30 07:28:43 +03:00
file net/bpf.c bpfilter needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file net/bpf_filter.c bpf_filter
file net/bsd-comp.c ppp & ppp_bsdcomp
file net/if.c
file net/if_arcsubr.c arc needs-flag
file net/if_atmsubr.c atm
Add configuration glue for forthcoming bridge code.
2001-04-11 07:43:23 +04:00
file net/if_bridge.c bridge needs-flag
file net/bridgestp.c bridge
Add MI Econet support. This is lacking any interfaces to higher-layer protocols, and lacking any timeouts, but it basically works, doing four-way handshakes in both directions and incoming Machine Peek operations. Oh, and Econet is Acorn's ancient, proprietary 500kbit/s networking technology.
2001-09-11 03:11:05 +04:00
file net/if_ecosubr.c eco
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_ethersubr.c ether | fddi | netatalk | token |
No need to explicitly list vlan or ppppoe for if_ethersubr.c, both already use attribute "ether" which will be enough to pull in if_ethersubr.c
2002-04-07 10:54:35 +04:00
wlan
build faith(4) only if INET and INET6 are specified. From: joda@pdc.kth.se (Johan Danielsson) on tech-net
2001-05-30 21:50:46 +04:00
file net/if_faith.c faith & inet & inet6 needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_fddisubr.c fddi needs-flag
file net/if_gif.c gif needs-flag
The cloning devices only needs-flag, not needs-count
2001-11-02 21:39:06 +03:00
file net/if_gre.c gre needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_hippisubr.c hippi needs-flag
file net/if_ieee1394subr.c ieee1394
Convert lo(4) to a clonable device. This also removes the loif array and changes all code to use the new lo0ifp pointer which points to the lo0 ifnet structure. Approved by christos.
2004-12-04 19:10:25 +03:00
file net/if_loop.c loop needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_media.c
clonify strip and sl.
2004-12-05 08:43:04 +03:00
file net/if_ppp.c ppp needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_stf.c stf & inet & inet6 needs-flag
clonify strip and sl.
2004-12-05 08:43:04 +03:00
file net/if_sl.c sl needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_spppsubr.c sppp
clonify strip and sl.
2004-12-05 08:43:04 +03:00
file net/if_strip.c strip needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_tokensubr.c token needs-flag
if_tap.c needs NBPFILTER flag.
2005-01-19 13:17:00 +03:00
file net/if_tap.c tap needs-flag
The cloning devices only needs-flag, not needs-count
2001-11-02 21:39:06 +03:00
file net/if_tun.c tun needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_vlan.c vlan needs-flag
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
file net/if_pppoe.c pppoe needs-flag
Include net/pfil.c when pf is set.
2006-01-07 17:19:51 +03:00
file net/pfil.c pfil_hooks | ipfilter | pf
whitespace police
2001-02-24 04:34:28 +03:00
file net/ppp-deflate.c ppp & ppp_deflate
file net/ppp_tty.c ppp
file net/radix.c
file net/raw_cb.c
file net/raw_usrreq.c
file net/route.c
file net/rtsock.c
Rename the IPR_VJ option into IRIP_VJ (as irip(4) told all the time), create an opt_ header and make the dependency on slcompress.c more exact. (OK by martin)
2003-04-11 18:45:27 +04:00
file net/slcompress.c sl | ppp | strip | (irip & irip_vj)
Add support for reading cloop2 compressed filesystem image, enable by putting VND_COMPRESSION into kernel config file. Written by Cliff Wright, polished up slightly by me.
2005-07-17 04:08:27 +04:00
file net/zlib.c (ppp & ppp_deflate) | ipsec | opencrypto | vnd_compression
whitespace police
2001-02-24 04:34:28 +03:00
file netinet/if_arp.c arp | netatalk needs-flag
file netinet/if_atm.c atm
file netinet/in_gif.c gif & inet
Pull in netinet/ip_ecn.c if FAST_IPSEC is defined.
2003-12-12 23:54:30 +03:00
file netinet/ip_ecn.c ipsec | fast_ipsec | gif | stf
whitespace police
2001-02-24 04:34:28 +03:00
file netinet/ip_encap.c inet | inet6
file netinet/ip_gre.c inet & gre
file netinet6/in6_gif.c gif & inet6
Cleanup how file system configuration information is declared, grouping related information together, with the file system code itself. This is just low-hanging fruit -- more to come.
2002-04-17 03:14:05 +04:00
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
file netisdn/i4b_ctl.c isdnctl needs-flag
file netisdn/i4b_isppp.c ippp needs-count
file netisdn/i4b_ipr.c irip needs-count
file netisdn/i4b_rbch.c isdnbchan needs-count
file netisdn/i4b_tel.c isdntel needs-count
file netisdn/i4b_trace.c isdntrc needs-count
whitespace police
2001-02-24 04:34:28 +03:00
First step to cleanup the hardware driver <-> upper layers interface. This now provides slightly more functionality than the FreeBSD layer1-newbus interface. It was meant to be a simple change to one header and a few c files, but the change rippled all through various stuff. To prevent a change to the kernel<->userland interface right now the kernel is now lying about card types to userland (but who cares). This will be fixed when the userland interface changes, after layer 3 <-> layer 4 has been fixed. Functional changes: Provide a clean interface for hardware drivers to attach to the upper layers. This will need another small change in the B-channel handling when a similar change to the layer 3 <-> layer 4 interface happens. Avoid passing indices into global arrays of pointers around, instead pass the pointers itself. Don't code hardware driver types by predefined magic numbers (think LKM). Prepare for detachable drivers (think pcmcia). While there remove some sets of function pointers always pointing to the same function (meant to be the configurable set of D channel protocol handlers). It is unlikely another supported D-channel protocol will fit into that (maximal layer interface) abstraction. When we get support for another protocol, we will need to come up with a workable interface. Besides, the old implementation was, uhm, strange.
2001-03-24 15:40:29 +03:00
file netisdn/i4b_mbuf.c passive_isdn
whitespace police
2001-02-24 04:34:28 +03:00
file netisdn/i4b_l2.c passive_isdn
file netisdn/i4b_l2fsm.c passive_isdn
file netisdn/i4b_uframe.c passive_isdn
file netisdn/i4b_tei.c passive_isdn
file netisdn/i4b_sframe.c passive_isdn
file netisdn/i4b_iframe.c passive_isdn
file netisdn/i4b_l2timer.c passive_isdn
file netisdn/i4b_util.c passive_isdn
file netisdn/i4b_lme.c passive_isdn
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# Q.931 handler
whitespace police
2001-02-24 04:34:28 +03:00
file netisdn/i4b_q931.c passive_isdn
file netisdn/i4b_q932fac.c passive_isdn
file netisdn/i4b_l3fsm.c passive_isdn
file netisdn/i4b_l3timer.c passive_isdn
file netisdn/i4b_l2if.c passive_isdn
file netisdn/i4b_l4if.c passive_isdn
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
# isdn device driver, interface to isdnd
file netisdn/i4b_i4bdrv.c isdn needs-flag
file netisdn/i4b_l4.c isdndev needs-flag
file netisdn/i4b_l4mgmt.c isdndev needs-flag
file netisdn/i4b_l4timer.c isdndev needs-flag
autoconf goop for iavc
2003-09-25 19:58:14 +04:00
# capi
file netisdn/i4b_capi_l4if.c isdncapi
file netisdn/i4b_capi_llif.c isdncapi
file netisdn/i4b_capi_msgs.c isdncapi
Reduce the massive code duplication regarding joy(4). Split it into MI and MD parts, and make ISA/ISAPNP/PCI joy(4) attachments MI.
2002-02-02 21:37:38 +03:00
# Game adapter (joystick)
device joy
file dev/ic/joy.c joy needs-flag
New Feature: add pseudo device for IEEE 1394 isochronous stream and isochronous reception routine for IEEE 1394 OHCI (fwohci). The transmission part is under construction. The minimum configuration options for this feature are: # IEEE 1394 (i.LINK) fwohci* at pci? dev ? function ? pseudo-device fwiso 1
2002-12-04 03:28:39 +03:00
add agr(4), a pseudo network device driver for link aggregation.
2005-03-18 14:11:50 +03:00
include "net/agr/files.agr"
Add gpio files and majors.
2005-09-27 06:41:10 +04:00
#
# General Purpose Input/Output framework
#
Dallas Semiconductor 1-Wire bus support, from OpenBSD. Currently includes gpioow(4), attaching a bit-banging driver via a GPIO pin. Also, owtemp(4) which supports some of the 1-Wire temperature sensors, including the DS18b20 and DS1920 - temperatures are returned via the envsys(4) framework. Original drivers by Alexander Yurchenko (grange@openbsd), with envsys(4) support and a fix to the 1-wire search algorithm (for discovering devices on the bus) by me. As discussed on tech-kern earlier this week.
2006-04-07 22:55:21 +04:00
define onewire_bitbang
Add gpio files and majors.
2005-09-27 06:41:10 +04:00
include "dev/gpio/files.gpio"
Dallas Semiconductor 1-Wire bus support, from OpenBSD. Currently includes gpioow(4), attaching a bit-banging driver via a GPIO pin. Also, owtemp(4) which supports some of the 1-Wire temperature sensors, including the DS18b20 and DS1920 - temperatures are returned via the envsys(4) framework. Original drivers by Alexander Yurchenko (grange@openbsd), with envsys(4) support and a fix to the 1-wire search algorithm (for discovering devices on the bus) by me. As discussed on tech-kern earlier this week.
2006-04-07 22:55:21 +04:00
include "dev/onewire/files.onewire"
Reference in New Issue Copy Permalink