Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f664080f40
NetBSD/sys/conf/files

1351 lines
33 KiB
Plaintext
Raw Normal View History

Move netatalk config defns to netatalk/files.netatalk.
2002-10-11 02:10:52 +04:00
# $NetBSD: files,v 1.562 2002/10/10 22:10:52 thorpej Exp $
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# @(#)files.newconf 7.5 (Berkeley) 5/10/93
Make KMEMSTATS a "header option".
1997-02-03 00:16:25 +03:00
# options understood by the machine-independent part of the kernel
# (note, these are case-sensitive)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag INSECURE
defflag KMEMSTATS
defflag KTRACE
systrace support.
2002-06-17 20:24:57 +04:00
defflag SYSTRACE
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam MAXUPRC
defparam RTC_OFFSET
defparam DEFCORENAME
defflag UCONSOLE
use opt_pipe.h for PIPE_SOCKETPAIR, add PIPE_NODIRECT there too
2002-02-11 21:03:00 +03:00
defflag opt_pipe.h PIPE_SOCKETPAIR PIPE_NODIRECT
Generate dependencies for the TCP_SENDSPACE and TCP_RECVSPACE options.
1997-07-29 02:31:08 +04:00
Add some experimental page-loaning for writes on sockets. It is disabled by default, and can be enabled by adding the SOSEND_LOAN option to your kernel config. The SOSEND_COUNTERS option can be used to provide some instrumentation. Use of this option, combined with an application that does large enough writes, gets us zero-copy on the TCP and UDP transmit path.
2002-05-02 21:55:48 +04:00
defflag opt_sock_counters.h SOSEND_COUNTERS
Make use of page loaning for large socket writes the default. The SOSEND_NO_LOAN option can be used to go back to the old behavior.
2002-08-21 09:13:36 +04:00
defflag opt_sosend_loan.h SOSEND_NO_LOAN
Add some experimental page-loaning for writes on sockets. It is disabled by default, and can be enabled by adding the SOSEND_LOAN option to your kernel config. The SOSEND_COUNTERS option can be used to provide some instrumentation. Use of this option, combined with an application that does large enough writes, gets us zero-copy on the TCP and UDP transmit path.
2002-05-02 21:55:48 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag MULTIPROCESSOR
defopt MULTIPROCESSOR.
1998-09-24 07:55:15 +04:00
Provide hooks to include the config file(s) in the kernel binary.
2001-12-17 18:40:43 +03:00
defflag opt_config.h INCLUDE_CONFIG_FILE INCLUDE_JUST_CONFIG
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_callout.h CALLWHEEL_STATS
Defopt CALLWHEEL_STATS.
2001-09-13 09:22:16 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_sysv.h SYSVMSG SYSVSEM SYSVSHM
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
defparam opt_sysvparam.h SHMMAXPGS SEMMNI SEMMNS SEMUME SEMMNU
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-20 02:14:54 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_ntp.h PPS_SYNC NTP
defopt NTP and PPS_SYNC, in preparation for adding PPS support.
1998-04-22 11:08:11 +04:00
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
defparam opt_kmempages.h NKMEMPAGES KMEMPAGES_MIN NKMEMPAGES_MAX
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_malloclog.h MALLOCLOG
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
defparam opt_malloclog.h MALLOCLOGSIZE
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_malloc_debug.h MALLOC_DEBUG
defflag opt_pool.h POOL_DIAGNOSTIC
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
defparam opt_poollog.h POOL_LOGSIZE
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_revcache.h NAMECACHE_ENTER_REVERSE
defopt NAMECACHE_ENTER_REVERSE
2001-03-30 02:40:06 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_execfmt.h EXEC_AOUT EXEC_COFF EXEC_ECOFF EXEC_ELF32
EXEC_ELF64 EXEC_MACHO EXEC_SCRIPT
rename EXEC_ELF_CATCHALL to EXEC_ELF_NOTELESS
2002-03-23 12:40:55 +03:00
EXEC_ELF_NOTELESS
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
defopt COMPAT_FREEBSD
1998-06-26 02:49:18 +04:00
# compatibility options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag COMPAT_FREEBSD
defflag COMPAT_HPUX
defflag COMPAT_IBCS2
defflag COMPAT_IRIX
defflag COMPAT_LINUX
defflag COMPAT_OSF1
defflag COMPAT_SUNOS
defflag opt_compat_svr4.h COMPAT_SVR4 COMPAT_SVR4_32 SVR4_COMPAT_SOLARIS2
defflag COMPAT_ULTRIX
defflag COMPAT_NETBSD32
defflag COMPAT_AOUT
defflag COMPAT_AOUT_M68K
defflag COMPAT_M68K4K
defflag COMPAT_MACH
defflag COMPAT_VAX1K
defflag COMPAT_43
defflag COMPAT_PECOFF
defflag opt_compat_netbsd.h COMPAT_09 COMPAT_10 COMPAT_11 COMPAT_12
Add COMPAT_15 to opt_compat_netbsd.h
2000-08-07 19:23:43 +04:00
COMPAT_13 COMPAT_14 COMPAT_15 COMPAT_NOMID
defopt NATM.
1998-07-06 02:48:05 +04:00
defopt INET, NETATALK.
1998-07-05 04:51:04 +04:00
# networking protocols
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_tcp_debug.h TCP_DEBUG
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
defparam opt_tcp_debug.h TCP_NDEBUG
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_inet.h INET INET6 INET6_MD_CKSUM
defflag opt_ipsec.h IPSEC IPSEC_ESP
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
defparam opt_inet_conf.h SUBNETSARELOCAL HOSTZEROBROADCAST
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_ns.h NS NSIP # NS network stack,
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
# XNS tunneled over IP
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_iso.h ISO TPIP # ISO network stack
netsmb
2002-01-04 05:42:23 +03:00
defflag opt_smb.h SMB # SMB network stack
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag IPX # IPX network stack
defflag EON # ISO clnp over IP
defflag CCITT #
defflag HDLC # CCITT over HDLC
defflag LLC # CCITT over LLC2 (& IEEE LLC?)
defflag NATM # "native" ATM protocols
defflag PFIL_HOOKS # pfil(9)
defflag IPFILTER_LOG # logging of ip packets
defflag opt_ppp.h PPP_DEFLATE PPP_BSDCOMP PPP_FILTER
# Include deflate or bsd
# compression, enable pppd
# packet filtering support
defopt INET, NETATALK.
1998-07-05 04:51:04 +04:00
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
# networking options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag GATEWAY
it is MROUTING, not ROUTING...
2001-11-28 20:39:22 +03:00
defflag MROUTING
and it is TCP_COMPAT_42 not CP_COMPAT_42, I am sharpening my bricks.
2001-11-28 20:40:57 +03:00
defflag TCP_COMPAT_42
defopt MROUTING and TCP_COMPAT_42
1998-01-12 05:58:58 +03:00
- replace "defopt" with "defparam" for options which must take a value, as config(8) will warn for value-less defparam options - minor whitespace/formatting cleanup - consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 17:34:18 +03:00
defparam opt_tcp_space.h TCP_RECVSPACE TCP_SENDSPACE
Generate dependencies on the exec format options EXEC_AOUT, EXEC_ECOFF, EXEC_ELF32, EXEC_ELF64, and EXEC_SCRIPT.
1998-01-22 04:32:14 +03:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_inet_csum.h INET_CSUM_COUNTERS TCP_CSUM_COUNTERS
UDP_CSUM_COUNTERS
Implement support for IP/TCP/UDP checksum offloading provided by network interfaces. This works by pre-computing the pseudo-header checksum and caching it, delaying the actual checksum to ip_output() if the hardware cannot perform the sum for us. In-bound checksums can either be fully-checked by hardware, or summed up for final verification by software. This method was modeled after how this is done in FreeBSD, although the code is significantly different in most places. We don't delay checksums for IPv6/TCP, but we do take advantage of the cached pseudo-header checksum. Note: hardware-assisted checksumming defaults to "off". It is enabled with ifconfig(8). See the manual page for details. Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet, 3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
2001-06-02 20:17:06 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam SB_MAX
defopt SB_MAX, which controls the maximum allowable size of socket buffers
1999-02-09 05:15:45 +03:00
clean up kernel/config files files for machVM lossage.
1999-03-24 09:06:09 +03:00
# UVM options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_uvmhist.h UVMHIST UVMHIST_PRINT
- add defopt's for UVM, UVMHIST and PMAP_NEW. - remove unnecessary UVMHIST_DECL's.
1998-02-10 17:08:44 +03:00
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
# file system options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Cleanup how file system configuration information is declared, grouping related information together, with the file system code itself. This is just low-hanging fruit -- more to come.
2002-04-17 03:14:05 +04:00
defflag SOFTDEP # XXX files.ufs?
defflag QUOTA # XXX files.ufs?
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag VNODE_OP_NOINLINE
Add defopt for QUOTA. While here, do some grouping of associated options.
1998-06-08 08:00:35 +04:00
defopt BUFCACHE and BUFPAGES.
1999-02-27 09:39:34 +03:00
# buffer cache size options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam opt_bufcache.h BUFCACHE BUFPAGES
defopt BUFCACHE and BUFPAGES.
1999-02-27 09:39:34 +03:00
In-kernel device configuration manager - allows modification of device locators at run-time. Written by Mats O Jansson <moj@stacken.kth.se>. Reworked by Jun-ichiro itojun Hagino <itojun@netbsd.org>.
2001-07-01 06:56:20 +04:00
# userconf
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag USERCONF
In-kernel device configuration manager - allows modification of device locators at run-time. Written by Mats O Jansson <moj@stacken.kth.se>. Reworked by Jun-ichiro itojun Hagino <itojun@netbsd.org>.
2001-07-01 06:56:20 +04:00
- add kern_allocsys.c - move a comment around
1999-05-20 10:01:16 +04:00
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- add kern_allocsys.c - move a comment around
1999-05-20 10:01:16 +04:00
# Not entirely MI, but present on multiple arch's
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- add kern_allocsys.c - move a comment around
1999-05-20 10:01:16 +04:00
defopt BUFCACHE and BUFPAGES.
1999-02-27 09:39:34 +03:00
# PC-style MBR handling
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_mbr.h COMPAT_386BSD_MBRPART
defopt COMPAT_386BSD_MBRPART into opt_mbr.h
1998-06-23 01:12:51 +04:00
defopt DDB.
1998-07-05 02:18:13 +04:00
# debugging options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_ddb.h DDB
defparam opt_ddb.h DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE
DDB_BREAK_CHAR DDB_KEYCODE SYMTAB_SPACE
defflag opt_kgdb.h KGDB
defparam opt_kgdb.h KGDB_DEV KGDB_DEVNAME
KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
defflag LOCKDEBUG
defflag SYSCALL_DEBUG
add KSTACK_CHECK_MAGIC. discussed on tech-kern.
2002-07-03 00:27:44 +04:00
defflag opt_kstack.h KSTACK_CHECK_MAGIC
defopt DDB.
1998-07-05 02:18:13 +04:00
defopt MEMORY_DISK_{HOOKS,SERVER,IS_ROOT}.
1999-02-07 12:34:58 +03:00
# memory (ram) disk options
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_md.h MEMORY_DISK_HOOKS MEMORY_DISK_IS_ROOT
MEMORY_DISK_DYNAMIC
Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE, which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as being more consistent with what it's controlling...
2002-04-02 09:30:34 +04:00
defparam opt_md.h MEMORY_DISK_SERVER MEMORY_DISK_ROOT_SIZE
defopt MINIROOTSIZE
1999-03-17 21:59:21 +03:00
Implement pmc(9) -- An interface to hardware performance monitoring counters. These counters do not exist on all CPUs, but where they do exist, can be used for counting events such as dcache misses that would otherwise be difficult or impossible to instrument by code inspection or hardware simulation. pmc(9) is meant to be a general interface. Initially, the Intel XScale counters are the only ones supported.
2002-08-07 09:14:47 +04:00
# Support for hardware performance monitoring counters
#
defflag opt_perfctrs.h PERFCTRS
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
# device classes
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
devclass disk
devclass tape
devclass ifnet
devclass tty
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# generic attributes
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename the audio "bus" attribute audiobus to avoid confusion with audio device.
2002-04-22 13:41:19 +04:00
define audiobus { }
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
define midibus { }
Add a layer to handle emulation of MIDI for synthesizers. It handles decoding of MIDI commands, voice allocation, and translation it notes to frequencies.
1998-08-12 22:14:01 +04:00
define midisyn
whitespace police
2001-02-24 04:34:28 +03:00
define wdc_base
Define a "scsi_core" attribute. Make the "scsi" attribute depend on "scsi_core". Make all the files previously selected by the "scsi" attribute selected by the "scsi_core" attribute. Give the "scsibus" device the "scsi_core" attribute.
2002-10-10 00:23:56 +04:00
define scsi_core
define scsi {[channel = -1]}: scsi_core
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
define ata {[channel = -1], [drive = -1]}
define atapi {[channel = -1]}
"attach radio at radio": using one word as both attribute and device doesn't work well, radio.c is pulled in even with no such device in the configuration, and the kernel doesn't link due to missing "radio_cd". So call the attribute "radiodev" to avoid confusion.
2002-01-07 20:44:42 +03:00
define radiodev { }
Some changes from Matt Thomas, to help support FDDI: add 'fddi' attribute, and files descriptions for it. XXX add 'pdq' attribute, and add files descriptions for it. This is to XXX support the various front-ends that use his driver (which will eventually XXX live on PCI, EISA, and TC busses at least). This is probably not the best XXX way to arrange this, but i can't think of a better way without whacking XXX a lot of things.
1995-08-19 04:49:15 +04:00
# audio device attributes
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
GUS audio driver from John Kohl.
1995-07-19 23:58:09 +04:00
define mulaw
Audio changes: - Change the way attach and open works to allow multiple audio devices. - Split the mulaw.c file into two to avoid dragging in mulaw convertsion when they are not needed. Add 16 bit alaw/mulaw tables. - Change the way audio properties are gotten. - Recognize more versions os SoundBlaster.
1997-08-01 02:33:08 +04:00
define auconv
Add aurateconv attribute.
2002-03-10 00:21:57 +03:00
define aurateconv
file dev/aurateconv.c aurateconv needs-flag
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
Add MIDI support. The MIDI devices can be accessed as ``raw'' through the /dev/rmidiN devices, or with a sequencer interface via /dev/music. So far the only supported MIDI device is the MPU401 port on SoundBlaster (and only on SB on isapnp, since we do not have locators with multiple values yet).
1998-08-07 04:00:55 +04:00
# audio and midi devices, attaches to audio hardware driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device audio
Rename the audio "bus" attribute audiobus to avoid confusion with audio device.
2002-04-22 13:41:19 +04:00
attach audio at audiobus
Add MIDI support. The MIDI devices can be accessed as ``raw'' through the /dev/rmidiN devices, or with a sequencer interface via /dev/music. So far the only supported MIDI device is the MPU401 port on SoundBlaster (and only on SB on isapnp, since we do not have locators with multiple values yet).
1998-08-07 04:00:55 +04:00
device midi
attach midi at midibus
Change the MI audio driver so it attaches to the MD driver in the normal way. This requires adding a line to the config files to get audio to work again.
1997-08-20 03:49:33 +04:00
Move IR and Bluetooth config defns to their own files.
2002-10-11 01:52:28 +04:00
# IR device support
include "dev/ir/files.ir"
Add irbus (IrDA) and cir (Consumer Ir) and related file directives.
2001-12-02 13:41:52 +03:00
Move IR and Bluetooth config defns to their own files.
2002-10-11 01:52:28 +04:00
# Bluetooth device support
include "dev/bluetooth/files.bluetooth"
Add btbus, an attribute for Bluetooth.
2002-08-24 21:28:58 +04:00
Put the rasops attributes in conf/files so that everyone can run config(8) without pulling in files.rasops. There is prior art for this, e.g. audio.
2000-04-20 22:23:37 +04:00
# raster operations attributes
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
define rasops1
define rasops2
define rasops4
define rasops8
define rasops15
define rasops16
define rasops24
define rasops32
Put the rasops attributes in conf/files so that everyone can run config(8) without pulling in files.rasops. There is prior art for this, e.g. audio.
2000-04-20 22:23:37 +04:00
Some changes from Matt Thomas, to help support FDDI: add 'fddi' attribute, and files descriptions for it. XXX add 'pdq' attribute, and add files descriptions for it. This is to XXX support the various front-ends that use his driver (which will eventually XXX live on PCI, EISA, and TC busses at least). This is probably not the best XXX way to arrange this, but i can't think of a better way without whacking XXX a lot of things.
1995-08-19 04:49:15 +04:00
# net device attributes - we have generic code for arc(net), ether(net),
Add MI Econet support. This is lacking any interfaces to higher-layer protocols, and lacking any timeouts, but it basically works, doing four-way handshakes in both directions and incoming Machine Peek operations. Oh, and Econet is Acorn's ancient, proprietary 500kbit/s networking technology.
2001-09-11 03:11:05 +04:00
# fddi, token ring, atm and eco(net).
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
clean up the whitespace, and kill the 4BSD SCSI code comments
1995-08-17 22:50:34 +04:00
define arc
add atm networking stuff
1996-06-22 05:49:00 +04:00
define atm
Add MI Econet support. This is lacking any interfaces to higher-layer protocols, and lacking any timeouts, but it basically works, doing four-way handshakes in both directions and incoming Machine Peek operations. Oh, and Econet is Acorn's ancient, proprietary 500kbit/s networking technology.
2001-09-11 03:11:05 +04:00
define eco
Some changes from Matt Thomas, to help support FDDI: add 'fddi' attribute, and files descriptions for it. XXX add 'pdq' attribute, and add files descriptions for it. This is to XXX support the various front-ends that use his driver (which will eventually XXX live on PCI, EISA, and TC busses at least). This is probably not the best XXX way to arrange this, but i can't think of a better way without whacking XXX a lot of things.
1995-08-19 04:49:15 +04:00
define ether
define fddi
Driver for Essential Communications' RoadRunner HIPPI (800 Mb/sec network) card. With some modification, this could probably also work for their Gigabit Ethernet card based on the same chipset...
1998-05-14 04:04:57 +04:00
define hippi
First Prototype implementation of network interface part for IEEE1394 (if_fw). Current status: Only OHCI chip is supported (fwohci). ping (IPv4) works with Sony's implementation (SmartConnect) on Win98. sometimes works but not stable. Not implemented yet: IRM (Isochronous Resource Manager) functionality. Link layer fragmentation. Topology map. More to do: clean ups MCAP charactor device part dhcp There is no entry in GENERIC config file yet. Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
2000-11-05 20:17:12 +03:00
define ieee1394
config(8) glue for Token-Ring and TROPIC drivers.
1999-03-23 01:33:35 +03:00
define token
port FreeBSD's serial ppp layer to NetBSD. The PPP part seems broken still, but the lmc driver uses the HDLC bits from here anyway.
1999-03-25 06:39:11 +03:00
define sppp
Support WEP functions for awi driver. arc4 implementation by Kalle Kaukonen has been added. define "wlan" in files. XXX: only awi depends on wlan for now. Allow authentication for adhoc (IBSS) mode. Disable adhoc mode without bssid (mediaopt adhoc,flag0) for FH radio. FH cannot work without synchronization by beacons. Align IP header for ethernet encapsulation (IFF_FLAG0) mode. Print available access points for IFF_DEBUG.
2000-07-04 18:27:56 +04:00
define wlan
IPv6 kernel code, based on KAME/NetBSD 1.4, SNAP kit 19990628. (Sorry for a big commit, I can't separate this into several pieces...) Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details. - sys/kern: do not assume single mbuf, accept chained mbuf on passing data from userland to kernel (or other way round). - "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ package (ftp://ftp.csl.sony.co.jp/pub/kjc/). - sys/netinet/tcp*: IPv4/v6 dual stack tcp support. - sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those file to be there so we patch it up. - sys/netinet: IPsec additions are here and there. - sys/netinet6/*: most of IPv6 code sits here. - sys/netkey: IPsec key management code - dev/pci/pcidevs: regen In my understanding no code here is subject to export control so it should be safe.
1999-07-01 12:12:45 +04:00
define crypto
Define the ncr5380sbc attribute and compile dev/ic/ncr5380sbc.c if it's used.
1996-01-02 01:27:08 +03:00
New ARP system, supports IPv4 over any hardware link. Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will only support Ethernet. Tcpdump itself should be ok, but libpcap needs lot of work. For the detailed change history, look at the commit log entries for the is-newarp branch.
1997-03-15 21:09:08 +03:00
# devices ARPing IPv4 pull this in:
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
New ARP system, supports IPv4 over any hardware link. Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will only support Ethernet. Tcpdump itself should be ok, but libpcap needs lot of work. For the detailed change history, look at the commit log entries for the is-newarp branch.
1997-03-15 21:09:08 +03:00
define arp
Move ALTQ configuration definitions into altq/files.altq
2002-04-17 01:27:13 +04:00
#
# ALTQ network traffic shaping subsystem
#
include "altq/files.altq"
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move IPKDB config defns to ipkdb/files.ipkdb.
2002-10-11 01:56:50 +04:00
# IPKDB kernel debugger
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move IPKDB config defns to ipkdb/files.ipkdb.
2002-10-11 01:56:50 +04:00
include "ipkdb/files.ipkdb"
Rename recently checked in KGDB to IPKDB to resolve conflicts with older KGDB
1996-10-16 23:32:08 +04:00
lsu -> ld, by popular request.
2000-11-26 20:44:02 +03:00
# Logical disk
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
lsu -> ld, by popular request.
2000-11-26 20:44:02 +03:00
device ld: disk
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ld.c ld needs-flag
ca -> lsu
2000-10-19 18:26:41 +04:00
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move sysmon configuration definitions to dev/sysmon/files.sysmon.
2002-04-17 01:00:27 +04:00
# System monitoring framework
#
include "dev/sysmon/files.sysmon"
Add a clearing-house pseudo-device for system monitoring devices such as the LM78 and VT82C686A (and eventually ACPI). Multiple sensor devices can be hooked registered with `sysmon', and eventually sysmon will also handle hardware (and software) watchdog timers. Convert the `lm' and `viaenv' drivers to the new interface.
2000-06-24 04:37:19 +04:00
* Move the mii_bitbang attribute into dev/mii/files.mii * Pull in dev/mii/files.mii from conf/files, rather than playing the magic "files include order" dance in N machine-dependent configuration definitions.
2002-04-17 00:50:16 +04:00
#
# MII/PHY support for network devices
#
include "dev/mii/files.mii"
Centralize the RAIDframe config definitions.
2002-04-17 00:33:00 +04:00
#
# RAIDframe
#
include "dev/raidframe/files.raidframe"
Add dmover(9) glue.
2002-08-02 04:32:12 +04:00
#
# Hardware-assisted data mover API
#
include "dev/dmover/files.dmover"
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Break up the ep driver into isa, eisa, and pci front-ends and a bus-independent core driver. Tested on all three bus types, including an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in your kernel config file to catch this one). XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 06:15:42 +04:00
# "Chipset" drivers. These are the bus-independent routines which
# contain the cfdrivers. Attachments are provided by files.<bus>
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Break up the ep driver into isa, eisa, and pci front-ends and a bus-independent core driver. Tested on all three bus types, including an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in your kernel config file to catch this one). XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 06:15:42 +04:00
From Enami Tsugutomo: Busify and split the aic6360 driver.
1997-10-06 23:49:17 +04:00
# Adaptec AIC-6[32]60 ICs
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device aic: scsi
From Enami Tsugutomo: Busify and split the aic6360 driver.
1997-10-06 23:49:17 +04:00
file dev/ic/aic6360.c aic
Fix an oversight in the AIC-7xxx SEEPROM split.
2000-01-26 09:27:32 +03:00
# SMC 93Cx6 Serial EEPROM devices
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Fix an oversight in the AIC-7xxx SEEPROM split.
2000-01-26 09:27:32 +03:00
define smc93cx6
file dev/ic/smc93cx6.c smc93cx6
Slight adjustments for new version of ahc driver.
1996-05-16 08:00:58 +04:00
# Adaptec 2[789]4X, 394X, aic7770 and aic78[5678]0 SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam opt_ahc.h AHC_DEBUG
defflag opt_ahc.h AHC_NO_TAGS
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device ahc: scsi
Split the code that reads the SEEPROM into its own file.
2000-01-26 09:04:37 +03:00
define ahc_seeprom
Add new files for common VL/EISA ahc code.
2000-03-15 05:10:09 +03:00
define ahc_aic77xx
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/aic7xxx.c ahc
Split the code that reads the SEEPROM into its own file.
2000-01-26 09:04:37 +03:00
file dev/ic/aic7xxx_seeprom.c ahc_seeprom
Add new files for common VL/EISA ahc code.
2000-03-15 05:10:09 +03:00
file dev/ic/aic77xx.c ahc_aic77xx
Slight adjustments for new version of ahc driver.
1996-05-16 08:00:58 +04:00
Add glue for 'dpt' driver.
1999-09-28 03:44:27 +04:00
# DPT EATA SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add glue for 'dpt' driver.
1999-09-28 03:44:27 +04:00
device dpt: scsi
file dev/ic/dpt.c dpt
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 17:52:22 +03:00
# Compaq Smart ARRAY controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 17:52:22 +03:00
device cac {unit = -1}
file dev/ic/cac.c cac
lsu -> ld, by popular request.
2000-11-26 20:44:02 +03:00
attach ld at cac with ld_cac
file dev/ic/ld_cac.c ld_cac
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 17:52:22 +03:00
Add a driver for the Mylex DAC960 family (including DEC SWXCR).
2001-02-04 20:05:11 +03:00
# Mylex DAC960 RAID controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add a driver for the Mylex DAC960 family (including DEC SWXCR).
2001-02-04 20:05:11 +03:00
device mlx {unit = -1}
file dev/ic/mlx.c mlx needs-flag
attach ld at mlx with ld_mlx
file dev/ic/ld_mlx.c ld_mlx
Add a driver for ICP-Vortex GDT and Intel Storage RAID controllers. Parts taken from OpenBSD. Test hardware kindly provided by Intel. This still needs management bits, and doesn't support older controllers, but that shouldn't be hard to fix.
2002-04-23 01:05:19 +04:00
# ICP-Vortex/Intel RAID controllers
#
device icp {unit = -1}
file dev/ic/icp.c icp needs-flag
attach ld at icp with ld_icp
file dev/ic/ld_icp.c ld_icp
device icpsp: scsi
file dev/ic/icpsp.c icpsp
attach icpsp at icp
Add a driver for Adaptec FSA RAID controllers, as often found in Dell servers. Based on the FreeBSD/OpenBSD versions.
2002-04-26 06:05:07 +04:00
# Adaptec FSA RAID controllers
#
device aac {unit = -1}
file dev/ic/aac.c aac
attach ld at aac with ld_aac
file dev/ic/ld_aac.c ld_aac
Add AdvanSys support
1998-08-26 18:20:37 +04:00
# AdvanSys 1200A, 1200B and ULTRA SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add AdvanSys support
1998-08-26 18:20:37 +04:00
device adv: scsi
file dev/ic/adv.c adv
advlib.c and advmcode.c should be built for all adv, not just adv_pci. From takashi.yamamoto@bigfoot.com, kern/12341.
2001-03-08 07:18:17 +03:00
file dev/ic/advlib.c adv
file dev/ic/advmcode.c adv
Add AdvanSys support
1998-08-26 18:20:37 +04:00
Add AdvanSys ULTRA WIDE SCSI controllers
1998-09-26 20:28:16 +04:00
# AdvanSys ULTRA WIDE SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add AdvanSys ULTRA WIDE SCSI controllers
1998-09-26 20:28:16 +04:00
device adw: scsi
file dev/ic/adw.c adw
Add generic bha and uha code.
1996-09-01 00:27:55 +04:00
# BusLogic MultiMaster and MultiMaster Ultra SCSI controllers
Reorder device declarations of bha and aha so th BusLogic driver probes before before the Adaptec 1542/1642 driver. As commented, Probing AHA first configures bhas as aha, via their AHA hardware-compatibility mode.
1997-07-29 02:48:59 +04:00
# (Must be declared before AHA to ensure bha probes before aha.
# Probing AHA first configures bhas as aha, via their AHA
# hardware-compatibility mode.)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device bha: scsi
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/bha.c bha
Add generic bha and uha code.
1996-09-01 00:27:55 +04:00
Reorder device declarations of bha and aha so th BusLogic driver probes before before the Adaptec 1542/1642 driver. As commented, Probing AHA first configures bhas as aha, via their AHA hardware-compatibility mode.
1997-07-29 02:48:59 +04:00
# Adaptec AHA-154x and AHA-164x controllers
# (must be after bha, see above)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device aha: scsi
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/aha.c aha
Reorder device declarations of bha and aha so th BusLogic driver probes before before the Adaptec 1542/1642 driver. As commented, Probing AHA first configures bhas as aha, via their AHA hardware-compatibility mode.
1997-07-29 02:48:59 +04:00
Add a driver for the Initio INIC-940/950 PCI SCSI controllers. Based on OpenBSD's iha driver, and modified some structures by me. Tested on arc, i386 and macppc.
2001-06-03 17:43:45 +04:00
# Initio INIC-940/950 SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add a driver for the Initio INIC-940/950 PCI SCSI controllers. Based on OpenBSD's iha driver, and modified some structures by me. Tested on arc, i386 and macppc.
2001-06-03 17:43:45 +04:00
device iha: scsi
file dev/ic/iha.c iha
add an entry for 'isp', the MI Qlogic ISP 10x0 SCSI Controller driver, from Matt Jacob.
1997-03-12 04:56:18 +03:00
# Qlogic ISP 10x0 SCSI Controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_isp.h ISP_DISABLE_1020_SUPPORT
ISP_DISABLE_1080_SUPPORT
ISP_DISABLE_2100_SUPPORT
ISP_DISABLE_2200_SUPPORT
ISP_DISABLE_FW ISP_TARGET_MODE
Add ISP_FW_CRASH_DUMP option for isp.
2002-02-22 01:23:33 +03:00
ISP_FW_CRASH_DUMP
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defparam opt_isp.h ISP_LOGDEFAULT
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device isp: scsi
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/isp.c isp
New file for building isp host adapter.
1998-07-16 00:22:19 +04:00
file dev/ic/isp_netbsd.c isp
add a (currently unused) option reference to isp_target mode
2000-01-20 20:12:34 +03:00
file dev/ic/isp_target.c isp
add an entry for 'isp', the MI Qlogic ISP 10x0 SCSI Controller driver, from Matt Jacob.
1997-03-12 04:56:18 +03:00
Add lfmiop (LSILogic Fusion-MPT I/O Processor) placeholders for driver to added latter.
2002-05-18 11:23:04 +04:00
# LSILogic Fusion-MPT I/O Processor SCSI/FC Controllers
#
device lfmiop: scsi
file dev/ic/lfmiop.c lfmiop
Add a MI driver for the Symbios/NCR 53c710 SCSI controller. This is based on amiga's siop driver, but converted to use bus_space(9) functions and modified to fit bus_dma(9) framework. Currently tested on NetBSD/arc with jazzio 53c710 SCSI, which really requires bus_dma(9) functions :-) Sync transfers and disconnect/reconnect are also working. TODO: - Test under more heavy load - Clean up osiop_checkintr() hander - Reorganize command queue and sync negotiation handling more suitable for thorpej-scsipi mid-layer - Re-think defered interrupt handling for amiga
2001-04-30 08:47:50 +04:00
# Symbios/NCR 53c710 SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add a MI driver for the Symbios/NCR 53c710 SCSI controller. This is based on amiga's siop driver, but converted to use bus_space(9) functions and modified to fit bus_dma(9) framework. Currently tested on NetBSD/arc with jazzio 53c710 SCSI, which really requires bus_dma(9) functions :-) Sync transfers and disconnect/reconnect are also working. TODO: - Test under more heavy load - Clean up osiop_checkintr() hander - Reorganize command queue and sync negotiation handling more suitable for thorpej-scsipi mid-layer - Re-think defered interrupt handling for amiga
2001-04-30 08:47:50 +04:00
device osiop: scsi
file dev/ic/osiop.c osiop
Update for siop split.
2000-05-15 12:27:24 +04:00
# common stuff for siop and esiop
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
define siop_common
file dev/ic/siop_common.c siop_common
Update for siop split.
2000-05-15 12:27:24 +04:00
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller (the name 'siop' is still being discussed, may change). Only basic disconnect/reselect for now, no sync/wide negotiation. Tested with 810A, 875 and 895 on i386 only. The bus-independant part should also be able to handle the 53c720 and 53c770. A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 21:56:58 +04:00
# Symbios/NCR 53c720/53c8xx SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
device siop: scsi,siop_common
file dev/ic/siop.c siop
defflag SIOP_SYMLED.
2002-04-18 16:04:05 +04:00
defflag opt_siop.h SIOP_SYMLED
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller (the name 'siop' is still being discussed, may change). Only basic disconnect/reselect for now, no sync/wide negotiation. Tested with 810A, 875 and 895 on i386 only. The bus-independant part should also be able to handle the 53c720 and 53c770. A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 21:56:58 +04:00
First cut at a esiop driver (enhanced siop). Doesn't implement tagged queuing yet. If is restricted to SIOP which implement the load/store instruction, and has 10 scratch registers (basically, 825 and newer, possibly 770). It implements a different interface between host and script, using a real ring for command starts, and improved support for reconnect which will allow 256 tag per device. It uses interrupt on the fly to signal complete command, which allows several commands to be serviced per interrupt and doesn't require the script to stop to signal command completion.
2002-04-22 02:52:05 +04:00
device esiop: scsi,siop_common
file dev/ic/esiop.c esiop
Add generic bha and uha code.
1996-09-01 00:27:55 +04:00
# UltraStor SCSI controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device uha: scsi
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/uha.c uha
Add generic bha and uha code.
1996-09-01 00:27:55 +04:00
Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD. This is very adhoc work for IETF meeting. - Since it seems that 'an' and 'wi' have similar hardware, low level functions should be shared. - There are PCI/ISA cards of Aironet but not supported yet. - The wiconfig interface is changed so that wiconfig cannot be used. - 'ancontrol' of FreeBSD is not ported. - Only infrastructure mode is tested. - WEP is not supported. Though I only have an Aironet card, Cisco card should be expected to work.
2000-12-12 02:16:50 +03:00
# Aironet PC4500/PC4800
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD. This is very adhoc work for IETF meeting. - Since it seems that 'an' and 'wi' have similar hardware, low level functions should be shared. - There are PCI/ISA cards of Aironet but not supported yet. - The wiconfig interface is changed so that wiconfig cannot be used. - 'ancontrol' of FreeBSD is not ported. - Only infrastructure mode is tested. - WEP is not supported. Though I only have an Aironet card, Cisco card should be expected to work.
2000-12-12 02:16:50 +03:00
device an: arp, ether, ifnet
file dev/ic/an.c an
Support WEP functions for awi driver. arc4 implementation by Kalle Kaukonen has been added. define "wlan" in files. XXX: only awi depends on wlan for now. Allow authentication for adhoc (IBSS) mode. Disable adhoc mode without bssid (mediaopt adhoc,flag0) for FH radio. FH cannot work without synchronization by beacons. Align IP header for ethernet encapsulation (IFF_FLAG0) mode. Print available access points for IFF_DEBUG.
2000-07-04 18:27:56 +04:00
# AMD 79c930-based 802.11 cards
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Support WEP functions for awi driver. arc4 implementation by Kalle Kaukonen has been added. define "wlan" in files. XXX: only awi depends on wlan for now. Allow authentication for adhoc (IBSS) mode. Disable adhoc mode without bssid (mediaopt adhoc,flag0) for FH radio. FH cannot work without synchronization by beacons. Align IP header for ethernet encapsulation (IFF_FLAG0) mode. Print available access points for IFF_DEBUG.
2000-07-04 18:27:56 +04:00
device awi: arp, wlan, ifnet
file dev/ic/awi.c awi
file dev/ic/am79c930.c awi
divided into PCMCIA attachment and common code of wi. since if_wi_ieee.h does not depend for pcmcia, sys/dev/pcmcia/if_wi_ieee.h was moved to sys/dev/ic/wi_ieee.h .
2001-05-06 07:26:38 +04:00
# Lucent & Intersil WaveLan IEEE (802.11)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Jumbo commit for wi driver. - Eliminate wi_hostap.c since most of the code are duplicated with net/if_ieee80211subr.c - Station for Infrastructure network and IBSS also use service functions as much as possible to be consistent with other wireless drivers. Now WEP works for station/ibss/hostap.
2002-09-30 10:50:35 +04:00
device wi: arp, wlan, ifnet
divided into PCMCIA attachment and common code of wi. since if_wi_ieee.h does not depend for pcmcia, sys/dev/pcmcia/if_wi_ieee.h was moved to sys/dev/ic/wi_ieee.h .
2001-05-06 07:26:38 +04:00
file dev/ic/wi.c wi
Break up the ep driver into isa, eisa, and pci front-ends and a bus-independent core driver. Tested on all three bus types, including an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in your kernel config file to catch this one). XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 06:15:42 +04:00
# 3Com Etherlink-III Ethernet controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add the mii_bitbang attribute to the elink3 and tlp drivers.
1999-11-19 21:16:13 +03:00
device ep: arp, ether, ifnet, mii, mii_bitbang
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/elink3.c ep
Break up the ep driver into isa, eisa, and pci front-ends and a bus-independent core driver. Tested on all three bus types, including an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in your kernel config file to catch this one). XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 06:15:42 +04:00
Add info for ex driver.
1998-11-04 03:28:05 +03:00
# 3Com EtherLink XL Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define the `mii_bitbang' attribute, and give it to the `ex' driver.
1999-11-17 20:56:00 +03:00
device ex: arp, ether, ifnet, mii, mii_bitbang
Add info for ex driver.
1998-11-04 03:28:05 +03:00
file dev/ic/elinkxl.c ex
Add files lines for lc device (LEMAC, DEC EtherWORKS III).
1997-08-01 01:56:33 +04:00
# DEC EtherWORKS III (LEMAC) Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device lc: arp, ether, ifnet
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/lemac.c lc
Add files lines for lc device (LEMAC, DEC EtherWORKS III).
1997-08-01 01:56:33 +04:00
Actually define the `le' device.
1996-05-07 12:56:54 +04:00
# LANCE and PCnet Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device le: arp, ether, ifnet
whitespace police
2001-02-24 04:34:28 +03:00
define le24
define le32
add declaration for hd64570, which the ntwo driver uses
1998-07-26 07:29:12 +04:00
file dev/ic/am7990.c le24
Split the LANCE driver into a part specific to the classic chip with 24-bit DMA addresses, and an independant part. Implement support for the 32-bit mode in the newer (79c9xx) chips.
1998-07-21 21:26:45 +04:00
file dev/ic/am79900.c le32
file dev/ic/lance.c le24 | le32
Actually define the `le' device.
1996-05-07 12:56:54 +04:00
Declare the `depca' device here, now that it can attach to multiple busses.
2000-08-11 18:35:57 +04:00
# DEC DEPCA-family of LANCE Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Declare the `depca' device here, now that it can attach to multiple busses.
2000-08-11 18:35:57 +04:00
device depca { }: le24
file dev/ic/depca.c depca
attach le at depca with le_depca
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
# Sun HME Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Declare the `hme' device.
1999-06-27 16:43:08 +04:00
device hme: arp, ether, ifnet, mii
file dev/ic/hme.c hme
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
Driver for Sun GEM gigabit ethernet, Sun ERI 10/100, and Apple GMAC.
2001-09-16 04:11:41 +04:00
# Sun GEM Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Driver for Sun GEM gigabit ethernet, Sun ERI 10/100, and Apple GMAC.
2001-09-16 04:11:41 +04:00
device gem: arp, ether, ifnet, mii
file dev/ic/gem.c gem
Add the dp8390 driver back end/attribute.
1997-04-29 09:11:32 +04:00
# 8390-family Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_ipkdb.h IPKDB_DP8390 : IPKDB
Add the dp8390 driver back end/attribute.
1997-04-29 09:11:32 +04:00
define dp8390nic
Make IPKDB working again. Add support for i386 debugging and pci-based ne2000 boards.
2000-03-22 23:58:25 +03:00
file dev/ic/dp8390.c dp8390nic | IPKDB_DP8390
Add the dp8390 driver back end/attribute.
1997-04-29 09:11:32 +04:00
if_media support for the DP83905 AT/LANTIC (a souped-up DP8390).
2001-12-16 03:22:43 +03:00
# National Semiconductor DP83905 AT/LANTIC Ethernet media support
#
define dp83905
file dev/ic/dp83905.c dp83905
Add code to support the bugged Macronix MX98905 chip, as used in several podulebus Ethernet cards. This replaces the NE2000 memory-access routines with ones that don't try to transfer more than 255 bytes at a time. This code should perhaps be merged into ne2000.c, but presumably most NE2000 clones won't need it.
2001-12-15 20:47:34 +03:00
# Macronix MX98905 Ethernet controller
# (use as an attribute for an "ne" bus attachment)
#
define mx98905
file dev/ic/mx98905.c mx98905
config(8) glue for Token-Ring and TROPIC drivers.
1999-03-23 01:33:35 +03:00
# TROPIC Token-Ring controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
config(8) glue for Token-Ring and TROPIC drivers.
1999-03-23 01:33:35 +03:00
device tr: arp, token, ifnet
file dev/ic/tropic.c tr
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
# NCR 5380 SCSI Bus Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
define ncr5380sbc
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/ncr5380sbc.c ncr5380sbc
Move `nca' declaration to `conf/files'.
2000-03-20 14:03:42 +03:00
device nca: scsi, ncr5380sbc
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
Add entries for the NatSemi MM58167 time-of-day clock chip and the chipset used in the Sun2 "sc" SCSI adapters.
2001-04-20 20:39:22 +04:00
# Sun sc PAL SCSI Bus Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add entries for the NatSemi MM58167 time-of-day clock chip and the chipset used in the Sun2 "sc" SCSI adapters.
2001-04-20 20:39:22 +04:00
define sunscpal
file dev/ic/sunscpal.c sunscpal
device ssc: scsi, sunscpal
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
# DEC FDDI Chipset
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
define pdq
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/pdq.c pdq
file dev/ic/pdq_ifsubr.c pdq
treat all "chipset drivers" similarly: include their file specs up with the definitions of their attributes. Previously, this was done for most but not all, and there was no good reason to be inconsistent.
1996-07-15 00:03:44 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
# Cyclades Cyclom-8/16/32
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device cy: tty
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/cy.c cy needs-flag
Add stub for cyclades multi-port serial cards
1996-09-24 21:43:35 +04:00
Centralize the declaration of the "en" driver (Efficient Networks, Inc. 155Mb/sec ATM interface).
1996-11-13 02:58:01 +03:00
# Efficient Networks, Inc. ATM interface
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Remove "class" declarations, and add "devclass" declarations where appropriate. Fix several inconsistencies between device class and attributes. Mostly from Chris Demetriou.
1998-02-17 01:12:45 +03:00
device en: atm, ifnet
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/midway.c en
Centralize the declaration of the "en" driver (Efficient Networks, Inc. 155Mb/sec ATM interface).
1996-11-13 02:58:01 +03:00
Define the ncr53c9x attribute to pull in the MI 53c9x driver.
1997-02-27 04:13:45 +03:00
# NCR 53x9x or Emulex ESP SCSI Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define the ncr53c9x attribute to pull in the MI 53c9x driver.
1997-02-27 04:13:45 +03:00
define ncr53c9x
Move esp declaration to conf/files.
2000-03-25 22:58:04 +03:00
device esp: scsi, ncr53c9x
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/ncr53c9x.c ncr53c9x
Define the ncr53c9x attribute to pull in the MI 53c9x driver.
1997-02-27 04:13:45 +03:00
add declaration for hd64570, which the ntwo driver uses
1998-07-26 07:29:12 +04:00
# Hitachi HD64570 serial controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move esp declaration to conf/files.
2000-03-25 22:58:04 +03:00
define hd64570
add declaration for hd64570, which the ntwo driver uses
1998-07-26 07:29:12 +04:00
file dev/ic/hd64570.c hd64570
move ntwoc here now that we have isa and pci attachments
2000-01-04 09:37:05 +03:00
# Riscom/N2 ISA/PCI Sync Serial Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
move ntwoc here now that we have isa and pci attachments
2000-01-04 09:37:05 +03:00
device ntwoc: ifnet, hd64570
Add line for the i82586 driver.
1997-07-23 03:33:33 +04:00
# Intel 82586 Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add line for the i82586 driver.
1997-07-23 03:33:33 +04:00
define i82586
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/i82586.c i82586
Add line for the i82586 driver.
1997-07-23 03:33:33 +04:00
Configuration glue for i82557 fast Ethernet driver.
1999-06-20 20:34:38 +04:00
# Intel 82557/82558/82559 Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Configuration glue for i82557 fast Ethernet driver.
1999-06-20 20:34:38 +04:00
device fxp: ether, ifnet, arp, mii
file dev/ic/i82557.c fxp
Split the arm26 Ether3 (ea) driver into an MI driver for the SEEQ 8005 chip, and a front-end driver for the Ether3. Only semantic change is to remove ea_claimirq() and ea_releaseirq() on the grounds that the seem too spurious to warrant a callback to the front-end.
2000-09-19 00:51:14 +04:00
# SEEQ 8005 Advanced Ethernet Data Link Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Split the arm26 Ether3 (ea) driver into an MI driver for the SEEQ 8005 chip, and a front-end driver for the Ether3. Only semantic change is to remove ea_claimirq() and ea_releaseirq() on the grounds that the seem too spurious to warrant a callback to the front-end.
2000-09-19 00:51:14 +04:00
define seeq8005
file dev/ic/seeq8005.c seeq8005
Pull "sm" driver declaration down from marc-pcmcia branch.
1997-09-02 05:50:32 +04:00
# SMC 91Cxx Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add MII support to smc91cxx driver. This is supported for the 91c100 and 91c100FD (FEAST) controllers. Existing controllers should continue to work as they have. Added the card's memory to the probe message.
2000-07-31 01:34:47 +04:00
device sm: arp, ether, ifnet, mii, mii_bitbang
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 05:02:29 +04:00
file dev/ic/smc91cxx.c sm
Pull "sm" driver declaration down from marc-pcmcia branch.
1997-09-02 05:50:32 +04:00
Device driver for the SMC 83c170 Ethernet PCI Integrated Controller (EPIC/100) used in the SMC EtherPower II. Media control isn't yet supported, due to some MII infrastructure problems which I hope to address soon. This isn't a huge deal, since the PHY defaults to auto-negotiate mode. Also, the device just programs the multicast hash table to accept all multicast, to avoid a hardware bug that causes the multicast address filter to lose in 10Mb/s mode. This bug will be fixed in a more sane way once the media control issues are dealt with.
1998-06-02 05:29:41 +04:00
# SMC 83C170 EPIC/100 Fast Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
miibus -> mii, and give it a locator "phy".
1998-08-11 04:06:12 +04:00
device epic: arp, ether, ifnet, mii
Device driver for the SMC 83c170 Ethernet PCI Integrated Controller (EPIC/100) used in the SMC EtherPower II. Media control isn't yet supported, due to some MII infrastructure problems which I hope to address soon. This isn't a huge deal, since the PHY defaults to auto-negotiate mode. Also, the device just programs the multicast hash table to accept all multicast, to avoid a hardware bug that causes the multicast address filter to lose in 10Mb/s mode. This bug will be fixed in a more sane way once the media control issues are dealt with.
1998-06-02 05:29:41 +04:00
file dev/ic/smc83c170.c epic
Driver for the DEC SGEC, Second Generation Ethernet Controller.
1999-08-08 15:41:28 +04:00
# DEC SGEC Second Generation Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Driver for the DEC SGEC, Second Generation Ethernet Controller.
1999-08-08 15:41:28 +04:00
define sgec
file dev/ic/sgec.c sgec
Define new attribute `mb86960' and new device `mbe'.
1998-03-22 07:37:04 +03:00
# MB8696x Ethernet Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define new attribute `mb86960' and new device `mbe'.
1998-03-22 07:37:04 +03:00
define mb86960
file dev/ic/mb86960.c mb86960
# Generic MB8696x Ethernet Controller driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define new attribute `mb86960' and new device `mbe'.
1998-03-22 07:37:04 +03:00
device mbe: arp, ether, ifnet, mb86960
Add the Interwave audio chip.
1997-10-07 00:12:26 +04:00
# Interwave Am78C201 audio driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add the Interwave audio chip.
1997-10-07 00:12:26 +04:00
define interwave
file dev/ic/interwave.c interwave
TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it. No optionboards yet for Melody, only audio driver. MPEG data types for audio.c
1997-10-17 03:58:10 +04:00
# TMS 320av110 MPEG2/audio driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
TMS320AV110 (mpeg layer 2 decoder chip) and ZBUS Melody board, which uses it. No optionboards yet for Melody, only audio driver. MPEG data types for audio.c
1997-10-17 03:58:10 +04:00
define tms320av110
file dev/ic/tms320av110.c tms320av110
From marc-pcmcia branch: add declaration of the "ne" driver for NE2000-compatible ethernet cards.
1997-10-15 02:49:02 +04:00
# Novell NE2000-compatible Ethernet cards, based on the
# National Semiconductor DS8390.
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_ipkdb.h IPKDB_NE : IPKDB_DP8390
Oops, `mii' attribute has to go onto the device decl.
2001-02-13 05:31:41 +03:00
device ne: ether, ifnet, arp, dp8390nic, mii
Make IPKDB working again. Add support for i386 debugging and pci-based ne2000 boards.
2000-03-22 23:58:25 +03:00
file dev/ic/ne2000.c ne | IPKDB_NE
From marc-pcmcia branch: add declaration of the "ne" driver for NE2000-compatible ethernet cards.
1997-10-15 02:49:02 +04:00
Add device declaration for the "com" driver. In a perfect world, this would be done with attributes, but alas... *sigh*
1997-10-16 04:38:11 +04:00
# 8250/16[45]50-based "com" ports
# XXX In a perfect world, this would be done with attributes
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_com.h COM16650 COM_HAYESP COM_DEBUG COM_MPLOCK
Support attachments to `com' needed for the Sun Keyboard/Mouse line disciplines.
2000-09-22 03:29:43 +04:00
device com { } : tty
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/com.c com needs-flag
Add device declaration for the "com" driver. In a perfect world, this would be done with attributes, but alas... *sigh*
1997-10-16 04:38:11 +04:00
Split the PC-like keyboard controller driver into chip back-end and bus front-end.
1999-12-04 01:48:22 +03:00
# PC-like keyboard controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Split the PC-like keyboard controller driver into chip back-end and bus front-end.
1999-12-04 01:48:22 +03:00
device pckbc { [slot = -1] }
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/pckbc.c pckbc needs-flag
Split the PC-like keyboard controller driver into chip back-end and bus front-end.
1999-12-04 01:48:22 +03:00
Add entry for CD240[01] driver.
1999-02-13 20:07:36 +03:00
# Cirrus Logic CD240[01] 4-port Multi-Protocol Communications Controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add entry for CD240[01] driver.
1999-02-13 20:07:36 +03:00
device clmpcc: tty
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/clmpcc.c clmpcc needs-flag
Add entry for CD240[01] driver.
1999-02-13 20:07:36 +03:00
Add mii and i2c.
1997-10-17 22:19:47 +04:00
# Device description for i2c bus and i2c eeprom
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
define i2c
define i2c_eeprom
Add mii and i2c.
1997-10-17 22:19:47 +04:00
Initial import of National Semiconductor LM7[89] Hardware Monitor with isa and pnpbios attach. examples: lm0 at pnpbios0 index? lm0 at isa? port 0x290 TODO: spinlocks, i2c interface.
2000-02-25 05:17:43 +03:00
# National Semiconductor LM7[89]
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
device lm: sysmon_envsys
file dev/ic/nslm7x.c lm needs-flag
Initial import of National Semiconductor LM7[89] Hardware Monitor with isa and pnpbios attach. examples: lm0 at pnpbios0 index? lm0 at isa? port 0x290 TODO: spinlocks, i2c interface.
2000-02-25 05:17:43 +03:00
Driver for Essential Communications' RoadRunner HIPPI (800 Mb/sec network) card. With some modification, this could probably also work for their Gigabit Ethernet card based on the same chipset...
1998-05-14 04:04:57 +04:00
# Essential Communications Corp. HIPPI Interface
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
device esh: hippi, ifnet
file dev/ic/rrunner.c esh needs-flag
Driver for Essential Communications' RoadRunner HIPPI (800 Mb/sec network) card. With some modification, this could probably also work for their Gigabit Ethernet card based on the same chipset...
1998-05-14 04:04:57 +04:00
Split SMC chipset ARCnet driver into - machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h, using bus_space methods - ZBUS frontend in arch/amiga/dev/if_bah_zbus.c - added IPL_SOFTNET to arch/amiga/include/intr.h, for this Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-03 02:32:06 +04:00
# SMC 90c26, SMC 90C56 (and 90C66 if in compat mode) chip driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
device bah: ifnet, arc, arp
file dev/ic/smc90cx6.c bah
Split SMC chipset ARCnet driver into - machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h, using bus_space methods - ZBUS frontend in arch/amiga/dev/if_bah_zbus.c - added IPL_SOFTNET to arch/amiga/include/intr.h, for this Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-03 02:32:06 +04:00
* Redo the way the way the MIDI driver attaches to audio devices. * Improve the midisyn layer a little. * Add a driver for the Yamaha OPL[23] FM synths. The opl driver is not finished yet; it sounds pretty awful. For some strange reason I cannot get any FM sound from my SB64 cards, but a regular SB16 works fine.
1998-08-18 01:16:09 +04:00
# OPL2/OPL3 FM synth driver
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Get opl MIDI dependecy right.
1998-08-23 02:53:06 +04:00
device opl: midibus, midisyn
* Redo the way the way the MIDI driver attaches to audio devices. * Improve the midisyn layer a little. * Add a driver for the Yamaha OPL[23] FM synths. The opl driver is not finished yet; it sounds pretty awful. For some strange reason I cannot get any FM sound from my SB64 cards, but a regular SB16 works fine.
1998-08-18 01:16:09 +04:00
file dev/ic/opl.c opl
file dev/ic/oplinstrs.c opl
Move the mpu device declaration to conf/files. Let the mpu device attach at the sb device, and then midi at the mpu. Update the mpu at eso attachment.
1999-08-02 21:37:41 +04:00
# MPU401 MIDI UART compatibles
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move the mpu device declaration to conf/files. Let the mpu device attach at the sb device, and then midi at the mpu. Update the mpu at eso attachment.
1999-08-02 21:37:41 +04:00
device mpu: midibus
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/mpu.c mpu needs-flag
Move the mpu device declaration to conf/files. Let the mpu device attach at the sb device, and then midi at the mpu. Update the mpu at eso attachment.
1999-08-02 21:37:41 +04:00
Define the ad1848 attribute here.
1998-08-26 02:38:29 +04:00
# AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define the ad1848 attribute here.
1998-08-26 02:38:29 +04:00
define ad1848
file dev/ic/ad1848.c ad1848
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
# AMD 7930 audio/ISDN codec
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Make am7930 driver machine independent. PR 10032 from Gregory McGarry.
2000-05-02 10:30:49 +04:00
define am7930
file dev/ic/am7930.c am7930
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
# SPARC `SUNW,audiocs'
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename the audio "bus" attribute audiobus to avoid confusion with audio device.
2002-04-22 13:41:19 +04:00
device audiocs: audiobus, auconv, ad1848
put `audiocs' stuff in here so we can share it between sbus & ebus.
1999-06-05 18:32:08 +04:00
file dev/ic/cs4231.c audiocs
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
# AC-97 CODECs
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
define ac97
file dev/ic/ac97.c ac97
Software codec for Oki MSM6258 voice synthesizer. Recording untested.
2001-05-02 16:53:31 +04:00
# Oki MSM6258 support code
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Software codec for Oki MSM6258 voice synthesizer. Recording untested.
2001-05-02 16:53:31 +04:00
define msm6258
file dev/ic/msm6258.c msm6258
Define LSI64854.
1998-08-30 01:52:54 +04:00
# LSI64854 DMA controller back-end
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define LSI64854.
1998-08-30 01:52:54 +04:00
define lsi64854
file dev/ic/lsi64854.c lsi64854
add a backend serial driver for the cirrus logic CL-CD180/1864/1865 8 port chip. this is used in several sbus (sparc) serial boards, as well as an 8 port isa card from riscom. sio16 (sbus) frontend coming shortly. this is heavily based on the com and zs drivers.
2001-10-03 08:25:29 +04:00
# Cirrus Logic CL-CD180/1864/1865 multi port serial controller back-end
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
add a backend serial driver for the cirrus logic CL-CD180/1864/1865 8 port chip. this is used in several sbus (sparc) serial boards, as well as an 8 port isa card from riscom. sio16 (sbus) frontend coming shortly. this is heavily based on the com and zs drivers.
2001-10-03 08:25:29 +04:00
define cd18xx
file dev/ic/cd18xx.c cd18xx
Define the "rtl80x9" attribute, to pull in code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
1998-10-31 03:43:19 +03:00
# RealTek 8019/8029 NE2000-compatible network interface subroutines
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define the "rtl80x9" attribute, to pull in code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
1998-10-31 03:43:19 +03:00
define rtl80x9
file dev/ic/rtl80x9.c rtl80x9
Incorporate the changes of RL81x9 driver provided by M. Kanaoka <kanaoka@ann.hi-ho.ne.jp>. He separated the driver into IC specific portion and bus attachment portion and added cardbus attachent.
2000-04-10 11:42:55 +04:00
# RealTek 8129/8139 Ethernet controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Changes the name of RealTek driver. The new name is `rtk'. This used to be called `rl' and it conflict with RL vax disks, canonical and historical unix driver name. This changes are minimal: it only changes the name of RealTek driver. The filename of source code and a lot of the letter `rl' in source files should be changed shortly.
2000-04-19 12:44:31 +04:00
device rtk: ether, ifnet, arp, mii
file dev/ic/rtl81x9.c rtk
Define LSI64854.
1998-08-30 01:52:54 +04:00
Move the `wdc' device into `conf/files'.
1998-11-23 00:57:47 +03:00
# Common code for ESDI/IDE/etc. controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
device wdc: ata, atapi, wdc_base
file dev/ic/wdc.c wdc_base
Shuffle wd/wdc driver files around (via repository copies). wdc now lives in dev/ic, wd now lives in dev/ata. there's now a 'ata' interface attribute defined in conf/files, but wdc can't go there yet because some ports still use private versions based on the old ISA version.
1998-01-15 02:36:30 +03:00
"upc" uses "wdc", so put the former after the latter.
2000-08-17 22:56:17 +04:00
# CHIPS and Technologies 82C7[12][01] Universal Peripheral Controller
# lpt attachment commented out because "device lpt" isn't in this file.
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
"upc" uses "wdc", so put the former after the latter.
2000-08-17 22:56:17 +04:00
device upc { [offset = -1] }
attach wdc at upc with wdc_upc
attach com at upc with com_upc
# attach lpt at upc with lpt_upc
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/upc.c upc
file dev/ic/wdc_upc.c wdc_upc
file dev/ic/com_upc.c com_upc
# file dev/ic/lpt_upc.c lpt_upc
"upc" uses "wdc", so put the former after the latter.
2000-08-17 22:56:17 +04:00
Add a placeholder for the ISA WaveLAN card
1999-10-30 01:35:43 +04:00
# Common code for ISA/PCMCIA (non 802.11) WaveLAN adapters
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
forgot one patch. add a define for wavelan
1999-10-30 01:41:19 +04:00
define wavelan
Add a placeholder for the ISA WaveLAN card
1999-10-30 01:35:43 +04:00
device wl: ether, ifnet, arp
file dev/ic/wavelan.c wavelan
This is the long-awaited "new Tulip driver", a complete, from-scratch rewrite of the driver for the DECchip 21x4x Ethernet chips, and a variety of clones. Currently, the driver supports the Winbond 89C840F (this works pretty well), and the Lite-On PNIC (e.g. NetGear PCI boards), however Lite-On support may be broken [I may simply have a busted test board]. Eventually, support for the Macronix and ASIX chips will filter into this driver, and then, slowly, support for the genuine DEC chips, and maybe even the DE-425 EISA model.
1999-09-01 04:32:41 +04:00
# DECchip 21x4x Ethernet controller family, and assorted clones.
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add the mii_bitbang attribute to the elink3 and tlp drivers.
1999-11-19 21:16:13 +03:00
device tlp: arp, ether, ifnet, mii, mii_bitbang
This is the long-awaited "new Tulip driver", a complete, from-scratch rewrite of the driver for the DECchip 21x4x Ethernet chips, and a variety of clones. Currently, the driver supports the Winbond 89C840F (this works pretty well), and the Lite-On PNIC (e.g. NetGear PCI boards), however Lite-On support may be broken [I may simply have a busted test board]. Eventually, support for the Macronix and ASIX chips will filter into this driver, and then, slowly, support for the genuine DEC chips, and maybe even the DE-425 EISA model.
1999-09-01 04:32:41 +04:00
file dev/ic/tulip.c tlp
Add declaration for the Adaptec AIC-6915 64-bit 10/100 Ethernet interface. Note: this is a placeholder right now; the driver should be ready in the next few days.
1999-10-13 22:37:12 +04:00
# Adaptec AIC-6915 Ethernet interface
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add declaration for the Adaptec AIC-6915 64-bit 10/100 Ethernet interface. Note: this is a placeholder right now; the driver should be ready in the next few days.
1999-10-13 22:37:12 +04:00
device sf: arp, ether, ifnet, mii
file dev/ic/aic6915.c sf
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
# Mostek time-of-day clock and NVRAM
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
define mk48txx
`mk48txx' no longer needs a flag.
2002-03-28 14:56:32 +03:00
file dev/ic/mk48txx.c mk48txx
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
# Intersil 7170 time-of-day clock
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define mk48txx and intersil7170
2000-07-26 02:41:58 +04:00
define intersil7170
file dev/ic/intersil7170.c intersil7170
Add entries for the NatSemi MM58167 time-of-day clock chip and the chipset used in the Sun2 "sc" SCSI adapters.
2001-04-20 20:39:22 +04:00
# National Semiconductor MM58167 time-of-day clock
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add entries for the NatSemi MM58167 time-of-day clock chip and the chipset used in the Sun2 "sc" SCSI adapters.
2001-04-20 20:39:22 +04:00
define mm58167
file dev/ic/mm58167.c mm58167
Config attribute for the DL10019 MII support.
2001-02-13 04:56:28 +03:00
# D-Link DL10019/10022 NE2000-compatible network interface subroutines
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Config attribute for the DL10019 MII support.
2001-02-13 04:56:28 +03:00
define dl10019
file dev/ic/dl10019.c dl10019
MII access routines for ASIX AX88190.
2001-08-04 15:38:57 +04:00
# ASIX AX88190 NE2000-compatible network interface subroutines
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
MII access routines for ASIX AX88190.
2001-08-04 15:38:57 +04:00
define ax88190
file dev/ic/ax88190.c ax88190
Split we(4) driver to bus independant and ISA-specific parts, in preparation for MCA attachment.
2001-03-23 22:08:53 +03:00
# WD/SMC 80x3 family, SMC Elite Ultra [8216], SMC EtherEZ
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Split we(4) driver to bus independant and ISA-specific parts, in preparation for MCA attachment.
2001-03-23 22:08:53 +03:00
device we: ether, ifnet, arp, dp8390nic
file dev/ic/we.c we
Prepare for MCA attachment: * split off sharable stuff to dev/ic/ate_subr.[ch], move ate(4) device definition to conf/files * cosmetic: attach with ate_isa
2001-03-31 04:26:53 +04:00
# Allied-Telesis Ethernet driver based on Fujitsu MB8696xA controllers
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Prepare for MCA attachment: * split off sharable stuff to dev/ic/ate_subr.[ch], move ate(4) device definition to conf/files * cosmetic: attach with ate_isa
2001-03-31 04:26:53 +04:00
device ate: arp, ether, ifnet, mb86960
Overhaul of fmv(4) driver: - Split if_fmv.c into MI/MD part and add ISA-PnP attachment for FMV-183. (XXX FMV-184 is not tested. It would require extra media-select functions..) - Fix probe functions of fmv_isa so that FMV-181A/182A will also match. Fixes port-i386/9476.
2002-10-05 19:16:10 +04:00
# Fujitsu FMV-18x Ethernet driver based on Fujitsu MB8696xA controllers
#
device fmv: arp, ether, ifnet, mb86960
file dev/ic/fmv.c fmv
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 22:17:05 +03:00
# Crystal Semiconductor CS8900, CS8920, and CS8920M Ethernet
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 22:17:05 +03:00
device cs: arp, ether, ifnet
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
file dev/ic/cs89x0.c cs
# Radio device attributes
#
define tea5757
file dev/ic/tea5757.c tea5757
define lm700x
file dev/ic/lm700x.c lm700x
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 22:17:05 +03:00
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
# Definitions for wscons
# device attributes: display, display with emulator, keyboard, and mouse
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Make the right defaults for kbdmux and mux locators.
2001-12-05 07:05:37 +03:00
define wsdisplaydev {[kbdmux = 1]}
define wsemuldisplaydev {[console = -1], [kbdmux = 1]}
define wskbddev {[console = -1], [mux = 1]}
define wsmousedev {[mux = 0]}
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
# attribute to pull in raster support
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
define wsrasteremulops
Put definitions and subroutines needed for all PC display adapters (MGA/GCA and compatibles) into global headers / source files. Let the VGA driver use them.
1998-05-28 20:53:18 +04:00
# common PC display functions
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag opt_pcdisplay.h PCDISPLAY_SOFTCURSOR
whitespace police
2001-02-24 04:34:28 +03:00
define pcdisplayops
Put definitions and subroutines needed for all PC display adapters (MGA/GCA and compatibles) into global headers / source files. Let the VGA driver use them.
1998-05-28 20:53:18 +04:00
file dev/ic/pcdisplay_subr.c pcdisplayops
add new file for pcdisplay mapping tables
1998-06-27 01:01:32 +04:00
file dev/ic/pcdisplay_chars.c pcdisplayops
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
# VGA graphics
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
put the "VGA_CONSOLE_SCREENTYPE" parameter into opt_vga.h
2002-07-07 19:09:52 +04:00
defparam opt_vga.h VGA_CONSOLE_SCREENTYPE
whitespace
2002-06-29 02:32:58 +04:00
defflag opt_vga.h VGA_CONSOLE_ATI_BROKEN_FONTSEL
Put definitions and subroutines needed for all PC display adapters (MGA/GCA and compatibles) into global headers / source files. Let the VGA driver use them.
1998-05-28 20:53:18 +04:00
device vga: wsemuldisplaydev, pcdisplayops
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/vga.c vga needs-flag
file dev/ic/vga_subr.c vga
Add (unfinished) igsfb driver. While here g/c stale cprofb entry, it's not in the tree and I plan to support CyberPro cards with igsfb driver eventually (where is my netwinder?)
2002-03-30 23:21:21 +03:00
# Integraphics Systems IGA168x and CyberPro framebuffers (linear non-VGA mode)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add (unfinished) igsfb driver. While here g/c stale cprofb entry, it's not in the tree and I plan to support CyberPro cards with igsfb driver eventually (where is my netwinder?)
2002-03-30 23:21:21 +03:00
device igsfb: wsemuldisplaydev, wsrasteremulops, rasops8
file dev/ic/igsfb.c igsfb
Add some preliminary support for setting up the CyberPro in Netwinder. Setup sequence obtained from Krups OFW with some CyberPro-specific magic from Linux driver. The driver still has a lot of hardcoded stuff, but it is useful enough to bring up wscons on netwinder. XXX: Proper console attachment needs to be written (the driver was originally developed on sparc, where our approach to attaching console is totally different). Caveat emptor!
2002-09-24 22:17:24 +04:00
file dev/ic/igsfb_subr.c igsfb
Move some definitions needed for nwscons here so that they can be used in mi drivers.
1998-04-15 23:55:09 +04:00
Move eisabus, tcbus attributes here. Attributes that "machine-independent" bus support want to attach to should be declared in conf/files, so that hairy ordering constraints on the inclusions of busses' "files" files in files.{MACHINE} are avoided. isabus, pcibus attributes will go here later. The problem is, for instance, that there are some devices in files.isa currently which require that 'pci' be defined, but there are some PCI devices (e.g. 'sio' on the Alpha) that provide isabus interfaces, i.e. 'isa' busses attach to them. Unless the the bus-attachment attributes are here, it's impossible to declare the busses' files and attribute dependencies in a machine-independent way.
1996-02-28 00:59:14 +03:00
# Attributes which machine-independent bus support can be attached to.
# These should be defined here, because some of these busses can have
# devices which provide these attributes, and we'd like to avoid hairy
# ordering constraints on inclusion of the busses' "files" files.
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
define isabus { } # ISA attachment
define eisabus { } # EISA attachment
define pcibus {[bus = -1]} # PCI attachment
define tcbus { } # TurboChannel attachment
define mcabus { } # MicroChannel attachment
define usbus { } # USB attachment
define fwbus {[idhi=-1],[idlo=-1]} # IEEE 1394 attachment
define vmebus { } # VME bus attachment
define acpibus { } # ACPI "bus" attachment
Define `pcmciabus'.
1998-11-26 18:31:22 +03:00
define pcmciabus { [controller = -1], [socket = -1]} # PCMCIA bus attachment
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
define cbbus {[slot = -1]} # CardBus attachment
define pcmciaslot {[slot = -1]} # PCMCIA slot itself
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# We need the USB bus controllers here so different busses can
# use them in an 'attach-with'.
# UHCI USB controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
device uhci: usbus
whitespace police
2001-02-24 04:34:28 +03:00
file dev/usb/uhci.c uhci needs-flag
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# OHCI USB controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
device ohci: usbus
whitespace police
2001-02-24 04:34:28 +03:00
file dev/usb/ohci.c ohci needs-flag
Move eisabus, tcbus attributes here. Attributes that "machine-independent" bus support want to attach to should be declared in conf/files, so that hairy ordering constraints on the inclusions of busses' "files" files in files.{MACHINE} are avoided. isabus, pcibus attributes will go here later. The problem is, for instance, that there are some devices in files.isa currently which require that 'pci' be defined, but there are some PCI devices (e.g. 'sio' on the Alpha) that provide isabus interfaces, i.e. 'isa' busses attach to them. Unless the the bus-attachment attributes are here, it's impossible to declare the busses' files and attribute dependencies in a machine-independent way.
1996-02-28 00:59:14 +03:00
Add some placeholders for the EHCI (USB 2) driver. Don't get your hopes up. I've not even finished reading the (100+) page spec, and I have no hardware.
2000-12-24 09:39:01 +03:00
# EHCI USB controller
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add some placeholders for the EHCI (USB 2) driver. Don't get your hopes up. I've not even finished reading the (100+) page spec, and I have no hardware.
2000-12-24 09:39:01 +03:00
device ehci: usbus
whitespace police
2001-02-24 04:34:28 +03:00
file dev/usb/ehci.c ehci needs-flag
Add some placeholders for the EHCI (USB 2) driver. Don't get your hopes up. I've not even finished reading the (100+) page spec, and I have no hardware.
2000-12-24 09:39:01 +03:00
Add driver for ScanLogic SL811HS/T USB Host Controller. XXX It's experimental code yet. For x68k: USB part of Nereid USB/Ethernet/memory board For ISA: ISA USB Host board from Morphy planning
2002-08-11 17:17:52 +04:00
# SL811HS/T USB controller
defflag opt_slhci.h SLHCI_DEBUG
device slhci: usbus
file dev/ic/sl811hs.c slhci needs-flag
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
# radio devices, attaches to radio hardware driver
device radio
"attach radio at radio": using one word as both attribute and device doesn't work well, radio.c is pulled in even with no such device in the configuration, and the kernel doesn't link due to missing "radio_cd". So call the attribute "radiodev" to avoid confusion.
2002-01-07 20:44:42 +03:00
attach radio at radiodev
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
Add definition for ieee1212/p1212
2002-02-27 08:03:24 +03:00
#
# IEEE 1212 routines
define ieee1212
file dev/std/ieee1212.c ieee1212
Provide a definition for sbp2
2002-04-02 14:11:50 +04:00
#
# SBP2 routines for IEEE 1394
define sbp2
file dev/ieee1394/sbp2.c sbp2
Add a fwlynx device. Move the file for fwohci to files.ieee1394
2000-11-15 02:37:20 +03:00
# IEEE 1394 controllers
# (These need to be here since it will have both PCI and CardBus attachments)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Add a fwlynx device. Move the file for fwohci to files.ieee1394
2000-11-15 02:37:20 +03:00
device fwlynx: fwbus
Add IEEE 1394 OHCI node and IEEE 1394 bus. Just placeholders for now.
2000-05-30 04:48:47 +04:00
device fwohci: fwbus
Add spic.
2002-04-22 17:03:06 +04:00
# Sony Programmable I/O Controller
device spic: wsmousedev
file dev/ic/spic.c spic
Add stuff for the CPC700.
2002-05-21 07:01:02 +04:00
# IBM CPC700 PowerPC bridge
define cpcbus { addr, [irq=-1] }
device cpc: cpcbus, pcibus
file dev/ic/cpc700.c cpc
attach com at cpcbus with com_cpcbus
file dev/ic/com_cpcbus.c com_cpcbus
device cpctim
attach cpctim at cpcbus
file dev/ic/timer_cpcbus.c cpctim
Rename a cpc device.
2002-05-21 07:05:00 +04:00
device cpciic
attach cpciic at cpcbus with iic_cpcbus
Add stuff for the CPC700.
2002-05-21 07:01:02 +04:00
file dev/ic/iic_cpcbus.c iic_cpcbus
Define a bpf_filter attribute, and include bpf_filter.o when we have it. Give the attribute to things which need to use the BPF virtual machine.
2000-12-29 03:54:58 +03:00
# Attribute used by various things that need BPF's virtual machine
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Define a bpf_filter attribute, and include bpf_filter.o when we have it. Give the attribute to things which need to use the BPF virtual machine.
2000-12-29 03:54:58 +03:00
define bpf_filter
defparam BPF_BUFSIZE
2002-06-07 03:54:47 +04:00
defparam opt_bpf.h BPF_BUFSIZE
Define a bpf_filter attribute, and include bpf_filter.o when we have it. Give the attribute to things which need to use the BPF virtual machine.
2000-12-29 03:54:58 +03:00
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# Attributes used by the ISDN subsystem
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
define isdndev # the ISDN subsystem
Wrap long lines.
2001-09-13 09:19:53 +04:00
define passive_isdn # files needed by passive cards (XXX - protocol
# specific)
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# ISDN cards based on the Siemens ISAC/HSCX chipset (or lookalikes)
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
device isic: isdndev, passive_isdn
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/isic.c isic
Now that we have all pieces in place (and enough granularity to specify B-channel and D-channel drivers separately) split the Fritz!PCI card driver out of the isic driver. The new device is called "ifpci" and uses the same D-channel driver as the isic devices, but has it's own B-channel driver.
2002-03-25 19:39:52 +03:00
file dev/ic/isac.c isic|ifpci
file dev/ic/isic_l1.c isic|ifpci
file dev/ic/isic_l1fsm.c isic|ifpci
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/hscx.c isic
file dev/ic/isic_bchan.c isic
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# (old) Diehl active ISDN cards
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
device daic: isdndev
whitespace police
2001-02-24 04:34:28 +03:00
file dev/ic/daic.c daic
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# legitimate pseudo-devices
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defpseudo vnd: disk
defpseudo ccd: disk
add in the cgd.
2002-10-04 22:25:51 +04:00
defpseudo cgd: disk
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defpseudo md: disk
netsmb
2002-01-04 05:42:23 +03:00
defpseudo netsmb
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 04:05:28 +04:00
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defpseudo pty: tty
defpseudo tb: tty
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 04:05:28 +04:00
defpseudo rnd
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defpseudo loop: ifnet
defpseudo sl: ifnet
defpseudo ppp: ifnet, bpf_filter
defpseudo pppoe: ifnet, ether, sppp
defpseudo sppp: ifnet
defpseudo tun: ifnet
defpseudo vlan: ifnet, ether
defpseudo bridge: ifnet, ether
defpseudo bpfilter: ifnet, bpf_filter
defpseudo strip: ifnet
defpseudo ipfilter: ifnet
defpseudo gre: ifnet
defpseudo gif: ifnet
defpseudo faith: ifnet
defpseudo stf: ifnet
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 04:05:28 +04:00
defpseudo sequencer
Added the clockctl pseudodevice driver
2001-09-16 11:33:31 +04:00
defpseudo clockctl
Aded missing irix_keme pseudodevice declaration
2002-03-24 20:09:26 +03:00
defpseudo irix_kmem
Added IRIX /dev/usema and dev/usemaclone (void driver for now, will be filled later)
2002-04-23 10:48:46 +04:00
defpseudo irix_usema
Add MIDI support. The MIDI devices can be accessed as ``raw'' through the /dev/rmidiN devices, or with a sequencer interface via /dev/music. So far the only supported MIDI device is the MPU401 port on SoundBlaster (and only on SB on isapnp, since we do not have locators with multiple values yet).
1998-08-07 04:00:55 +04:00
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# ISDN userland pseudo devices
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
defpseudo isdntrc: isdndev, tty
defpseudo isdnbchan: isdndev, tty
defpseudo isdntel: isdndev, tty
defpseudo isdnctl: isdndev, tty
defpseudo isdn: isdndev, tty
# ISDN network interfaces
defpseudo irip: isdndev, ifnet
defpseudo ippp: isdndev, sppp, ifnet
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
This is the "kttcp" network throughput testing pseudo-device. From the block comment at the top of the file: This module provides kernel support for testing network throughput from the perspective of the kernel. It is similar in spirit to the classic ttcp network benchmark program, the main difference being that with kttcp, the kernel is the source and sink of the data. Testing like this is useful for a few reasons: 1. This allows us to know what kind of performance we can expect from network applications that run in the kernel space, such as the NFS server or the NFS client. These applications don't have to move the data to/from userspace, and so benchmark programs which run in userspace don't give us an accurate model. 2. Since data received is just thrown away, the receiver is very fast. This can provide better exercise for the sender at the other end. 3. Since the NetBSD kernel currently uses a run-to-completion scheduling model, kttcp provides a benchmark model where preemption of the benchmark program is not an issue. There is a companion "kttcp" user program which uses the kttcp pseudo-device. Largely written by Frank van der Linden, with some modifications from me.
2002-06-29 03:27:13 +04:00
# KTTCP network throughput testing pseudo-device
defpseudo kttcp
file dev/kttcp.c kttcp needs-flag
Cleanup how file system configuration information is declared, grouping related information together, with the file system code itself. This is just low-hanging fruit -- more to come.
2002-04-17 03:14:05 +04:00
#
# File systems
#
include "adosfs/files.adosfs"
include "coda/files.coda"
include "filecorefs/files.filecorefs"
include "fs/smbfs/files.smbfs"
include "isofs/cd9660/files.cd9660"
include "miscfs/fdesc/files.fdesc"
include "miscfs/kernfs/files.kernfs"
include "miscfs/nullfs/files.nullfs"
include "miscfs/overlay/files.overlay"
include "miscfs/portal/files.portal"
include "miscfs/procfs/files.procfs"
include "miscfs/umapfs/files.umapfs"
include "miscfs/union/files.union"
include "msdosfs/files.msdosfs"
include "nfs/files.nfs"
include "ntfs/files.ntfs"
include "ufs/files.ufs"
#
rename files files for new config/config.old naming
1995-04-28 12:19:12 +04:00
# kernel sources
add some empty comment lines to make this more readable (IMHO)
2001-11-28 04:13:21 +03:00
#
whitespace police
2001-02-24 04:34:28 +03:00
file crypto/arc4/arc4.c wlan
cgd should be able to work with or without ipsec.
2002-10-05 03:04:53 +04:00
file crypto/des/des_ecb.c (ipsec & ipsec_esp) | cgd
file crypto/des/des_setkey.c (ipsec & ipsec_esp) | cgd
add in the cgd.
2002-10-04 22:25:51 +04:00
file crypto/des/des_enc.c ((ipsec & ipsec_esp) | cgd) &
!crypto_md_des_enc
file crypto/des/des_cbc.c cgd & !crypto_md_des_cbc
file crypto/blowfish/bf_enc.c ((ipsec & ipsec_esp) | cgd) &
!crypto_md_bf_enc
file crypto/blowfish/bf_cbc.c cgd & !crypto_md_bf_cbc
cgd should be able to work with or without ipsec.
2002-10-05 03:04:53 +04:00
file crypto/blowfish/bf_skey.c (ipsec & ipsec_esp) | cgd
file crypto/cast128/cast128.c (ipsec & ipsec_esp) | cgd
add in the cgd.
2002-10-04 22:25:51 +04:00
file crypto/rijndael/rijndael-alg-fst.c (ipsec & ipsec_esp) | cgd
file crypto/rijndael/rijndael-api-fst.c (ipsec & ipsec_esp) | cgd
whitespace police
2001-02-24 04:34:28 +03:00
file ddb/db_access.c ddb | kgdb
file ddb/db_aout.c ddb
file ddb/db_break.c ddb
file ddb/db_command.c ddb
file ddb/db_elf.c ddb
file ddb/db_examine.c ddb
file ddb/db_expr.c ddb
file ddb/db_input.c ddb
file ddb/db_lex.c ddb
file ddb/db_output.c ddb
file ddb/db_print.c ddb
file ddb/db_run.c ddb | kgdb
file ddb/db_sym.c ddb
file ddb/db_trap.c ddb
file ddb/db_variables.c ddb
file ddb/db_watch.c ddb
file ddb/db_write_cmd.c ddb
file ddb/db_xxx.c ddb
file dev/auconv.c auconv
file dev/audio.c audio | midi | midibus needs-flag
file dev/ccd.c ccd needs-flag
add in the cgd.
2002-10-04 22:25:51 +04:00
file dev/cgd.c cgd needs-flag
file dev/cgd_crypto.c cgd
order dev/clockctl.c appropriately
2002-01-15 15:10:50 +03:00
file dev/clockctl.c clockctl needs-flag
add in the cgd.
2002-10-04 22:25:51 +04:00
file dev/dksubr.c cgd
whitespace police
2001-02-24 04:34:28 +03:00
file dev/i2c/i2c_bus.c i2c
file dev/i2c/i2c_eeprom.c i2c_eeprom
file dev/md.c md needs-count
file dev/midi.c midi | midibus needs-flag
file dev/midisyn.c midisyn
Add mm.c
2002-02-27 04:16:30 +03:00
file dev/mm.c
whitespace police
2001-02-24 04:34:28 +03:00
file dev/mulaw.c mulaw
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov for OpenBSD, from where it was imported.
2002-01-02 00:51:38 +03:00
file dev/radio.c radio needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file dev/rnd.c rnd needs-flag
file dev/rndpool.c rnd needs-flag
file dev/sequencer.c sequencer needs-flag
file dev/vnd.c vnd needs-flag
Build core_elf32.c if EXEC_ELF32. Build core_elf64.c if EXEC_ELF64.
2001-12-10 02:18:09 +03:00
file kern/core_elf32.c exec_elf32
file kern/core_elf64.c exec_elf64
Make the coredump routine exec-format/emulation specific. Split out traditional NetBSD coredump routines into core_netbsd.c and netbsd32_core.c (for COMPAT_NETBSD32).
2001-12-08 03:35:25 +03:00
file kern/core_netbsd.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/cnmagic.c
file kern/exec_aout.c exec_aout
file kern/exec_conf.c
file kern/exec_ecoff.c exec_ecoff
file kern/exec_elf32.c exec_elf32
file kern/exec_elf64.c exec_elf64
file kern/exec_elf_common.c exec_elf32 | exec_elf64
add macho glue
2001-07-14 06:05:54 +04:00
file kern/exec_macho.c exec_macho
whitespace police
2001-02-24 04:34:28 +03:00
file kern/exec_script.c exec_script
file kern/exec_subr.c
file kern/init_main.c
file kern/init_sysent.c
file kern/kern_acct.c
file kern/kern_allocsys.c
file kern/kern_clock.c
file kern/kern_descrip.c
file kern/kern_exec.c
file kern/kern_exit.c
file kern/kern_fork.c
file kern/kern_kthread.c
file kern/kern_ktrace.c
Only build kern_systrace.c if the SYSTRACE option is used.
2002-06-18 04:33:57 +04:00
file kern/kern_systrace.c systrace
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_lkm.c lkm
file kern/kern_lock.c
file kern/kern_malloc.c
Artur Grabowski's simple brute-force malloc debugger, which uses guard pages. Can only debug one malloc type at a time, and nothing larger than 1 page. But can be useful for debugging certain types of "data modified on freelist" type problems. Modified from code in OpenBSD.
2001-08-17 04:48:29 +04:00
file kern/kern_malloc_debug.c malloc_debug
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_ntptime.c
file kern/kern_physio.c
file kern/kern_proc.c
file kern/kern_prot.c
add kern_ras.c
2002-08-28 11:19:58 +04:00
file kern/kern_ras.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/kern_resource.c
file kern/kern_sig.c
file kern/kern_subr.c
file kern/kern_synch.c
file kern/kern_sysctl.c
file kern/kern_time.c
file kern/kern_xxx.c
file kern/kgdb_stub.c kgdb
file kern/subr_autoconf.c
Merge the gehenna-devsw branch into the trunk. This merge changes the device switch tables from static array to dynamically generated by config(8). - All device switches is defined as a constant structure in device drivers. - The new grammer ``device-major'' is introduced to ``files''. device-major <prefix> char <num> [block <num>] [<rules>] - All device major numbers must be listed up in port dependent majors.<arch> by using this grammer. - Added the new naming convention. The name of the device switch must be <prefix>_[bc]devsw for auto-generation of device switch tables. - The backward compatibility of loading block/character device switch by LKM framework is broken. This is necessary to convert from block/character device major to device name in runtime and vice versa. - The restriction to assign device major by LKM is completely removed. We don't need to reserve LKM entries for dynamic loading of device switch. - In compile time, device major numbers list is packed into the kernel and the LKM framework will refer it to assign device major number dynamically.
2002-09-06 17:18:43 +04:00
file kern/subr_devsw.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/subr_disk.c
file kern/subr_extent.c
file kern/subr_log.c
file kern/subr_pool.c
file kern/subr_prf.c
file kern/subr_prof.c
Add kern/subr_prop.c.
2001-10-04 23:05:32 +04:00
file kern/subr_prop.c
In-kernel device configuration manager - allows modification of device locators at run-time. Written by Mats O Jansson <moj@stacken.kth.se>. Reworked by Jun-ichiro itojun Hagino <itojun@netbsd.org>.
2001-07-01 06:56:20 +04:00
file kern/subr_userconf.c userconf
whitespace police
2001-02-24 04:34:28 +03:00
file kern/subr_xxx.c
file kern/sys_generic.c
Switch default for pipes to the faster John S. Dyson's implementation. Old, socketpair-based ones are available with option PIPE_SOCKETPAIR.
2002-02-11 21:11:41 +03:00
file kern/sys_pipe.c !pipe_socketpair
Implement pmc(9) -- An interface to hardware performance monitoring counters. These counters do not exist on all CPUs, but where they do exist, can be used for counting events such as dcache misses that would otherwise be difficult or impossible to instrument by code inspection or hardware simulation. pmc(9) is meant to be a general interface. Initially, the Intel XScale counters are the only ones supported.
2002-08-07 09:14:47 +04:00
file kern/sys_pmc.c
whitespace police
2001-02-24 04:34:28 +03:00
file kern/sys_process.c
file kern/sys_socket.c
file kern/syscalls.c syscall_debug
file kern/sysv_ipc.c sysvshm | sysvsem | sysvmsg
file kern/sysv_msg.c sysvmsg
file kern/sysv_sem.c sysvsem
file kern/sysv_shm.c sysvshm
file kern/tty.c
file kern/tty_conf.c
file kern/tty_pty.c pty needs-flag
file kern/tty_subr.c
file kern/tty_tb.c tb needs-count
file kern/tty_tty.c
file kern/uipc_domain.c
file kern/uipc_mbuf.c
file kern/uipc_mbuf2.c
file kern/uipc_proto.c
file kern/uipc_socket.c
file kern/uipc_socket2.c
file kern/uipc_syscalls.c
file kern/uipc_usrreq.c
file kern/vfs_bio.c
file kern/vfs_cache.c
file kern/vfs_getcwd.c
file kern/vfs_init.c
file kern/vfs_lockf.c
file kern/vfs_lookup.c
file kern/vfs_subr.c
file kern/vfs_syscalls.c
file kern/vfs_vnops.c
file kern/vnode_if.c
file miscfs/deadfs/dead_vnops.c
file miscfs/fifofs/fifo_vnops.c
file miscfs/genfs/genfs_vnops.c
file miscfs/genfs/layer_subr.c nullfs | overlay | umapfs | lkm
file miscfs/genfs/layer_vfsops.c nullfs | overlay | umapfs | lkm
file miscfs/genfs/layer_vnops.c nullfs | overlay | umapfs | lkm
file miscfs/specfs/spec_vnops.c
file miscfs/syncfs/sync_subr.c
file miscfs/syncfs/sync_vnops.c
file net/bpf.c bpfilter needs-count
file net/bpf_filter.c bpf_filter
file net/bsd-comp.c ppp & ppp_bsdcomp
file net/if.c
file net/if_arcsubr.c arc needs-flag
file net/if_atmsubr.c atm
Add configuration glue for forthcoming bridge code.
2001-04-11 07:43:23 +04:00
file net/if_bridge.c bridge needs-flag
file net/bridgestp.c bridge
Add MI Econet support. This is lacking any interfaces to higher-layer protocols, and lacking any timeouts, but it basically works, doing four-way handshakes in both directions and incoming Machine Peek operations. Oh, and Econet is Acorn's ancient, proprietary 500kbit/s networking technology.
2001-09-11 03:11:05 +04:00
file net/if_ecosubr.c eco
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_ethersubr.c ether | fddi | netatalk | token |
No need to explicitly list vlan or ppppoe for if_ethersubr.c, both already use attribute "ether" which will be enough to pull in if_ethersubr.c
2002-04-07 10:54:35 +04:00
wlan
build faith(4) only if INET and INET6 are specified. From: joda@pdc.kth.se (Johan Danielsson) on tech-net
2001-05-30 21:50:46 +04:00
file net/if_faith.c faith & inet & inet6 needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_fddisubr.c fddi needs-flag
file net/if_gif.c gif needs-flag
The cloning devices only needs-flag, not needs-count
2001-11-02 21:39:06 +03:00
file net/if_gre.c gre needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_hippisubr.c hippi needs-flag
file net/if_ieee1394subr.c ieee1394
Move IEEE 802.11 MAC management functions from awi driver to if_ieee80211subr.c, which can be shared between any IEEE 802.11 drivers. However, most of current working IEEE 802.11b wireless LAN cards have rich firmware and we cannot have a control to management frames for such cards. IBSS creation is now supported for the awi driver.
2001-09-18 13:09:57 +04:00
file net/if_ieee80211subr.c wlan
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_loop.c loop needs-count
file net/if_media.c
file net/if_ppp.c ppp needs-count
file net/if_stf.c stf & inet & inet6 needs-flag
file net/if_sl.c sl needs-count
file net/if_spppsubr.c sppp
file net/if_strip.c strip needs-count
file net/if_tokensubr.c token needs-flag
The cloning devices only needs-flag, not needs-count
2001-11-02 21:39:06 +03:00
file net/if_tun.c tun needs-flag
whitespace police
2001-02-24 04:34:28 +03:00
file net/if_vlan.c vlan needs-flag
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
file net/if_pppoe.c pppoe needs-flag
Fix space/tab indentation nit.
2002-05-22 09:49:57 +04:00
#file net/net_osdep.c
whitespace police
2001-02-24 04:34:28 +03:00
file net/pfil.c pfil_hooks | ipfilter
file net/ppp-deflate.c ppp & ppp_deflate
file net/ppp_tty.c ppp
file net/radix.c
file net/raw_cb.c
file net/raw_usrreq.c
file net/route.c
file net/rtsock.c
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
file net/slcompress.c sl | ppp | strip | irip
whitespace police
2001-02-24 04:34:28 +03:00
file net/zlib.c (ppp & ppp_deflate) | ipsec
file netccitt/ccitt_proto.c ccitt
file netccitt/hd_debug.c hdlc
file netccitt/hd_input.c hdlc
file netccitt/hd_output.c hdlc
file netccitt/hd_subr.c hdlc
file netccitt/hd_timer.c hdlc
file netccitt/if_x25subr.c ccitt
file netccitt/llc_input.c llc
file netccitt/llc_output.c llc
file netccitt/llc_subr.c llc
file netccitt/llc_timer.c llc
file netccitt/pk_acct.c ccitt
file netccitt/pk_debug.c ccitt
file netccitt/pk_input.c ccitt
file netccitt/pk_llcsubr.c llc | hdlc
file netccitt/pk_output.c ccitt
file netccitt/pk_subr.c ccitt
file netccitt/pk_timer.c ccitt
file netccitt/pk_usrreq.c ccitt
file netinet/fil.c ipfilter
file netinet/if_arp.c arp | netatalk needs-flag
file netinet/if_atm.c atm
file netinet/igmp.c inet
file netinet/in.c inet
file netinet/in_gif.c gif & inet
file netinet/in_pcb.c inet
file netinet/in_proto.c inet
file netinet/ip_auth.c ipfilter needs-flag
file netinet/ip_ecn.c ipsec | gif | stf
file netinet/ip_encap.c inet | inet6
file netinet/ip_fil.c ipfilter
file netinet/ip_flow.c inet & gateway
file netinet/ip_frag.c ipfilter
file netinet/ip_gre.c inet & gre
file netinet/ip_icmp.c inet
file netinet/ip_input.c inet
file netinet/ip_log.c ipfilter & ipfilter_log
file netinet/ip_mroute.c inet & mrouting
file netinet/ip_nat.c ipfilter
file netinet/ip_output.c inet
file netinet/ip_proxy.c ipfilter
file netinet/ip_state.c ipfilter
file netinet/raw_ip.c inet
file netinet/tcp_debug.c inet | inet6
file netinet/tcp_input.c inet | inet6
file netinet/tcp_output.c inet | inet6
file netinet/tcp_subr.c inet | inet6
file netinet/tcp_timer.c inet | inet6
file netinet/tcp_usrreq.c inet | inet6
file netinet/udp_usrreq.c inet | inet6
file netinet6/ah_core.c ipsec
file netinet6/ah_input.c ipsec
file netinet6/ah_output.c ipsec
file netinet6/dest6.c inet6
file netinet6/esp_core.c ipsec & ipsec_esp
file netinet6/esp_output.c ipsec & ipsec_esp
file netinet6/esp_input.c ipsec & ipsec_esp
file netinet6/esp_rijndael.c ipsec & ipsec_esp
file netinet6/frag6.c inet6
file netinet6/icmp6.c inet6
file netinet6/in6.c inet6
Add infrastructure to allow ports to override build of in6_cksum.c by enabling the INET6_MD_CKSUM option, which is defopted into opt_inet.h. Supply an i386 assembly version of in6_cksum in in_cksum.s; on P6-family cpu's, this is is roughly 20% faster than the C code in sys/netinet6 for ethernet-mtu-sized mbufs in L1 cache. Turn on INET6_MD_CKSUM in i386/conf/std.i386 While we're here, also nuke some now-obsolete XXX comments from in_cksum.s.
2001-05-26 21:46:11 +04:00
file netinet6/in6_cksum.c inet6 & !inet6_md_cksum
whitespace police
2001-02-24 04:34:28 +03:00
file netinet6/in6_gif.c gif & inet6
file netinet6/in6_ifattach.c inet6
file netinet6/in6_pcb.c inet6
file netinet6/in6_proto.c inet6
file netinet6/in6_src.c inet6
file netinet6/ip6_forward.c inet6
file netinet6/ip6_input.c inet6
file netinet6/ip6_mroute.c inet6
file netinet6/ip6_output.c inet6
file netinet6/ipcomp_core.c ipsec
file netinet6/ipcomp_input.c ipsec
file netinet6/ipcomp_output.c ipsec
file netinet6/ipsec.c ipsec
file netinet6/mld6.c inet6
file netinet6/nd6.c inet6
file netinet6/nd6_nbr.c inet6
file netinet6/nd6_rtr.c inet6
file netinet6/raw_ip6.c inet6
file netinet6/route6.c inet6
file netinet6/udp6_output.c inet6
file netinet6/udp6_usrreq.c inet6
file netiso/clnp_debug.c iso
file netiso/clnp_er.c iso
file netiso/clnp_frag.c iso
file netiso/clnp_input.c iso
file netiso/clnp_options.c iso
file netiso/clnp_output.c iso
file netiso/clnp_raw.c iso
file netiso/clnp_subr.c iso
file netiso/clnp_timer.c iso
file netiso/cltp_usrreq.c iso
file netiso/esis.c iso
file netiso/idrp_usrreq.c iso
file netiso/if_cons.c iso
file netiso/if_eon.c eon
file netiso/iso.c iso
file netiso/iso_chksum.c iso
file netiso/iso_pcb.c iso
file netiso/iso_proto.c iso
file netiso/iso_snpac.c iso
file netiso/tp_astring.c iso | tpip
file netiso/tp_cons.c iso
file netiso/tp_driver.c iso | tpip
file netiso/tp_emit.c iso | tpip
file netiso/tp_inet.c iso | tpip
file netiso/tp_input.c iso | tpip
file netiso/tp_iso.c iso
file netiso/tp_meas.c iso | tpip
file netiso/tp_output.c iso | tpip
file netiso/tp_pcb.c iso | tpip
file netiso/tp_subr.c iso | tpip
file netiso/tp_subr2.c iso | tpip
file netiso/tp_timer.c iso | tpip
file netiso/tp_trace.c iso | tpip
file netiso/tp_usrreq.c iso | tpip
file netkey/key.c ipsec
file netkey/key_debug.c ipsec
file netkey/keydb.c ipsec
file netkey/keysock.c ipsec
file netnatm/natm.c natm
file netnatm/natm_pcb.c natm
file netnatm/natm_proto.c natm
file netns/idp_usrreq.c ns
file netns/ns.c ns
file netns/ns_error.c ns
file netns/ns_input.c ns
file netns/ns_ip.c ns & nsip
file netns/ns_output.c ns
file netns/ns_pcb.c ns
file netns/ns_proto.c ns
file netns/spp_debug.c ns
file netns/spp_usrreq.c ns
netsmb
2002-01-04 05:42:23 +03:00
file netsmb/iconv.c netsmb
file netsmb/smb_conn.c netsmb needs-count
file netsmb/smb_crypt.c netsmb needs-count
file netsmb/smb_dev.c netsmb needs-count
file netsmb/smb_iod.c netsmb needs-count
file netsmb/smb_rq.c netsmb needs-count
file netsmb/smb_smb.c netsmb needs-count
file netsmb/smb_subr.c netsmb needs-count
file netsmb/smb_trantcp.c netsmb needs-count
file netsmb/smb_usr.c netsmb needs-count
file netsmb/subr_mchain.c netsmb
Cleanup how file system configuration information is declared, grouping related information together, with the file system code itself. This is just low-hanging fruit -- more to come.
2002-04-17 03:14:05 +04:00
whitespace police
2001-02-24 04:34:28 +03:00
file uvm/uvm_amap.c
file uvm/uvm_anon.c
file uvm/uvm_aobj.c
file uvm/uvm_bio.c
file uvm/uvm_device.c
file uvm/uvm_fault.c
file uvm/uvm_glue.c
file uvm/uvm_init.c
file uvm/uvm_io.c
file uvm/uvm_km.c
file uvm/uvm_loan.c
file uvm/uvm_map.c
file uvm/uvm_meter.c
file uvm/uvm_mmap.c
file uvm/uvm_page.c
file uvm/uvm_pager.c
file uvm/uvm_pdaemon.c
file uvm/uvm_pglist.c
file uvm/uvm_stat.c
file uvm/uvm_swap.c
file uvm/uvm_unix.c
file uvm/uvm_user.c
file uvm/uvm_vnode.c
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
file netisdn/i4b_ctl.c isdnctl needs-flag
file netisdn/i4b_isppp.c ippp needs-count
file netisdn/i4b_ipr.c irip needs-count
file netisdn/i4b_rbch.c isdnbchan needs-count
file netisdn/i4b_tel.c isdntel needs-count
file netisdn/i4b_trace.c isdntrc needs-count
whitespace police
2001-02-24 04:34:28 +03:00
First step to cleanup the hardware driver <-> upper layers interface. This now provides slightly more functionality than the FreeBSD layer1-newbus interface. It was meant to be a simple change to one header and a few c files, but the change rippled all through various stuff. To prevent a change to the kernel<->userland interface right now the kernel is now lying about card types to userland (but who cares). This will be fixed when the userland interface changes, after layer 3 <-> layer 4 has been fixed. Functional changes: Provide a clean interface for hardware drivers to attach to the upper layers. This will need another small change in the B-channel handling when a similar change to the layer 3 <-> layer 4 interface happens. Avoid passing indices into global arrays of pointers around, instead pass the pointers itself. Don't code hardware driver types by predefined magic numbers (think LKM). Prepare for detachable drivers (think pcmcia). While there remove some sets of function pointers always pointing to the same function (meant to be the configurable set of D channel protocol handlers). It is unlikely another supported D-channel protocol will fit into that (maximal layer interface) abstraction. When we get support for another protocol, we will need to come up with a workable interface. Besides, the old implementation was, uhm, strange.
2001-03-24 15:40:29 +03:00
file netisdn/i4b_mbuf.c passive_isdn
whitespace police
2001-02-24 04:34:28 +03:00
file netisdn/i4b_l2.c passive_isdn
file netisdn/i4b_l2fsm.c passive_isdn
file netisdn/i4b_uframe.c passive_isdn
file netisdn/i4b_tei.c passive_isdn
file netisdn/i4b_sframe.c passive_isdn
file netisdn/i4b_iframe.c passive_isdn
file netisdn/i4b_l2timer.c passive_isdn
file netisdn/i4b_util.c passive_isdn
file netisdn/i4b_lme.c passive_isdn
Enable the imported ISDN4BSD based ISDN subsystem. This is the kernel part (userland to follow soon) of the latest (and very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a homepage at http://www.freebsd-support.de/i4b/. It gives the user various ways to use the isdn connection: raw data (via the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device), voice/answering machine (the i4btel "telephone" device) and ip over isdn (the ipr device, "IP over raw ISDN"). Supported are a bunch of common and older cards, more to be added soon after some cleanup. Currently only the european E-DSS1 variant of the ISDN D channel protocol is supported.
2001-01-05 16:09:15 +03:00
# Q.931 handler
whitespace police
2001-02-24 04:34:28 +03:00
file netisdn/i4b_q931.c passive_isdn
file netisdn/i4b_q932fac.c passive_isdn
file netisdn/i4b_l3fsm.c passive_isdn
file netisdn/i4b_l3timer.c passive_isdn
file netisdn/i4b_l2if.c passive_isdn
file netisdn/i4b_l4if.c passive_isdn
Rename ISDN devices, per discussion on tech-kern. The network devices become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e. for answering machines).
2002-03-16 19:55:51 +03:00
# isdn device driver, interface to isdnd
file netisdn/i4b_i4bdrv.c isdn needs-flag
file netisdn/i4b_l4.c isdndev needs-flag
file netisdn/i4b_l4mgmt.c isdndev needs-flag
file netisdn/i4b_l4timer.c isdndev needs-flag
Reduce the massive code duplication regarding joy(4). Split it into MI and MD parts, and make ISA/ISAPNP/PCI joy(4) attachments MI.
2002-02-02 21:37:38 +03:00
# Game adapter (joystick)
device joy
file dev/ic/joy.c joy needs-flag
Reference in New Issue Copy Permalink