This set of changes adds support for searching for a given config file
in the directories listed in $XDG_CONFIG_DIRS if it wasn't found in
$XDG_CONFIG_HOME or ~/.config. This allows packages to install custom
config files in /etc/xdg/weston, for example, thus allowing them to
avoid dealing with home directories.
To avoid a TOCTOU race the config file is actually open()ed during the
search. Its file descriptor is returned and stored in the compositor
for later use when performing subsequent config file parses.
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
In case a toytoolkit application manages to schedule resizes constantly,
throttle them to the main surface display.
When resizing, all surfaces are updated synchronously, so it also makes
sense to synchronize on the main surface's frame callback particularly.
Rendering any faster will not make sense.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Mesa's eglSwapBuffers() waits for the frame event from the previous
swapBuffers, before it returns. Apparently eglSwapInterval(), which
should be able to disable the wait, is unimplemented for now.
When a sub-surface contains an EGL widget, and the commit mode is
synchronized, the frame events will not be delivered to EGL until the
parent surface gets committed. Therefore rendering the EGL widget twice
would lead to a deadlock.
When the window is being resized, we need to force a repaint of the EGL
widget, too, to make the whole window consistent. For that, we need to
make sure the frame event from the previous eglSwapBuffers() actually
arrives.
This patch adds an extra wl_surface.commit(parent), when the window is
being resized, which should guarantee, that the previous eglSwapBuffers
gets its event.
To properly handle an EGL widget in a sub-surface, running in its own
thread, the EGL widget's automatic updates should be paused before
sending the extra wl_surface.commit(parent). A natural place for the
pause would be in the widget's resize hook. However, wl_surface.commit
cannot be called right after resize hooks, because it would commit new,
incomplete surface state. Therefore this patch is not enough for
threaded toytoolkit applications. Luckily those do not exist yet.
When eglSwapInterval() gets implemented, this patch should be reverted.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add a demo program with:
- a main surface (green)
- a Cairo-image sub-surface (red)
- a raw GLESv2 widget (triangle)
Sub-surface input region is set empty to avoid problems in toytoolkit.
If Cairo links to libGL, then we will end up with also libGLESv2 linked
to subsurfaces program, and both libs getting really used, which leads
to disaster.
Do not build subsurfaces demo, if Cairo links to libGL and cairo-egl is
usable.
The GL rendering loop is not tied to the toytoolkit or the widget, but
runs directly from its own frame callback. Therefore it runs
independent of the rest of the application. This also relies on one of
two things:
- eglSwapInterval(0) is implemented, and therefore eglSwapBuffers never
blocks indefinitely, or
- toytoolkit has a workaround, that guarantees that eglSwapBuffers will
return soon, when we force a repaint on resize.
Otherwise the demo will deadlock.
The code is separated into three sections:
1. The library component, using only EGL, GLESv2, and libwayland-client
APIs, and not aware of any toolkit details of the parent application.
This runs independently until the parent application tells otherwise.
2. The glue code: a toytoolkit application widget, who has its own
rendering machinery.
3. The application written in toytoolkit.
This patch also adds new toytoolkit interfaces:
- widget_get_wl_surface()
- widget_get_last_time()
- widget_input_region_add()
Toytoolkit applications have not had a possibility to change the input
region. The frame widget (decorations) set the input region on its own
when used, otherwise the default input region of everything has been
used. If a window does not have a frame widget, it can now use
widget_input_region_add() to set a custom input region.
These are not window methods, because a widget may lie on a different
wl_surface (sub-surface) than the window.
Changes in v3:
- replace set_commit_mode with set_sync and set_desync
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add redraw_needed flag to all surfaces, in addition to having one in
window. The window redraw_needed flag is changed to force a redraw of
the whole window, regardless of frame events.
widget_schedule_redraw() now schedules the redraw only for the surface,
where the widget is on. window_schedule_redraw() is equivalent to
scheduling a redraw for all (sub-)surfaces of the window.
We still use only one deferred task for all redraws.
surface_redraw() will skip the redraw, if the window does not force a
redraw and the surface does not need a redraw. It will also skip the
redraw, if the frame callback from the previous redraw has not triggered
yet. When the frame callback later arrives, the redraw task will be
scheduled, if the surface still needs a redraw.
If the window forces a redraw, the redraw is executed even if there is a
pending frame callback. This is for resizing: resizing should trigger a
window repaint, as it really wants to update all surfaces in one go, to
apply possible sub-surface size and position changes. Resizing is the
only thing that makes a window force a redraw.
With this change, subsurfaces demo can avoid repainting the cairo
sub-surface while still animating the GL sub-surface.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
The new application API window_add_subsurface() will create a plain
widget that is on a new sub-surface.
The sub-surface position is taken from the surface's root widget
allocation. This way widget allocations are always in the main surface
(i.e. window) coordinates. However, Cairo drawing coordinates will now
be different to widget coordinates for sub-surfaces. Cairo coordinates
are fixed by applying a translation in widget_cairo_create(), so that
widget drawing code can simply use the widget allocation as before.
Sub-surfaces are hooked up into resize, window flush, redraw, and
find_widget. Window maintains a list of sub-surfaces in top-first order.
Add a client settable default commit mode, and toggle the mode when
resizing to guarantee in-sync updates of a window and its sub-surfaces.
Changes in v3:
- replaced set_commit_mode with set_sync and set_desync
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Increase the maximum number of shm "leaves" to three, and rewrite the
leaf release and pick algorithms. The new algorithms hopefully improve
on buffer re-use while freeing unused buffers.
The goal of the new release algorithm is to always leave one free leaf
with storage allocated, so that the next redraw could start straight on
it.
The new leaf picking algorithm will prefer a free leaf that already has
some storage allocated, instead of just picking the first free leaf that
may need to allocate a new buffer.
Triple-buffering is especially for sub-surfaces, where the compositor
may have one wl_buffer busy on screen, and another wl_buffer busy in the
sub-surface cached state due to the synchronized commit mode. To be
able to forcibly repaint at that situation for e.g. resize, we need a
third buffer.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add protocol for sub-surfaces, wl_subcompositor as the global interface,
and wl_subsurface as the per-surface interface extension.
This patch is meant to be reverted, once sub-surfaces are moved into
Wayland core.
Changes in v2:
- Rewrite wl_subcompositor.get_subsurface description, and move mapping
and commit details into wl_subsurface description. Check the wording
in wl_subsurface.set_position description.
- Add wl_subsurface.set_commit_mode request, and document it, with the
commit_mode enum. Add bad_value error code for wl_subsurface.
- Moved the protocol into Weston repository so we can land it upstream
sooner for public exposure. It is to be moved into Wayland core later.
- Add destroy requests to both wl_subcompositor and wl_subsurface, and
document them. Experience has showed, that interfaces should always
have a destructor unless there is a good and future-proof reason to not
have it.
Changes in v3:
- Specify, that wl_subsurface will become inert, if the corresponding
wl_surface is destroyed, instead of requiring a certain destruction
order.
- Replaced wl_subsurface.set_commit_mode with wl_subsurface.set_sync and
wl_subsurface.set_desync. Parent-cached commit mode is now called
synchronized, and independent mode is desynchronized. Removed
commit_mode enum, and bad_value error.
- Added support for nested sub-surfaces.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Also rename input_method_context to wl_input_method_context,
input_panel to wl_input_panel and input_panel_surface to
wl_input_panel_surface.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Use "default" preedit style as default. "None" is used when the
composing text should look like non-composing text.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
There were some reset calls missing, which resulted in wrong preedit
state on input method side.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
wl_egl_window_destory() destroys the window handle that
dri2_destroy_surface() later uses when eglTerminate() is called.
Reordering the tear down order prevents such case from occuring.
Resolve a bad frame visible when maximizing toytoolkit programs with the the
maximize button in decorations. Windows now use wl_display.sync requests to
wait for a maximize to finish before drawing again, following suggestions from
http://lists.freedesktop.org/archives/wayland-devel/2013-February/007650.html
The current semantics would implicitly attach the most recently attached
buffer at commit time and send a release event when the buffer enventually
was released. The implicit attach is a little too subtle though and this
patch changes the semantics to always only send release events in response
to an attach event. As a consequence, once a compositor releases a buffer,
it no longer has a reference to it and wl_surfcea.damage is undefined.
Thus, the client side visible change is that damage request must always
be preceeded by a wl_surface.attach request, to ensure there's a valid buffer,
even if that means attaching the same buffer again.
Make sure that display_acquire_window_surface() creates the Cairo
surface as necessary. Otherwise surface->toysurface can be NULL.
This fixes weston-screensaver fullscreen mode. Demo mode was not
affected as it uses window decorations, and so the Cairo surface is
created. This regression was introduced by:
commit 0c4445ba57
Author: Pekka Paalanen <ppaalanen@gmail.com>
Date: Wed Feb 13 16:17:23 2013 +0200
window: create Cairo surfaces on demand for redraw
Reported-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add an extra cursor_position, which also allows to change the anchor
(for slections). Change the index type to int to allow setting it before
the beginning of a commited string.
The cursor should not be moved as a direct repsonse to this event but
atomically on the next commit_string event.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Allows to show/hide the input panel (virtual keyboard) more independent
of focus (some applications might to require additionaly click on a
focused entry to show the input panel).
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Allows for atomic state changes. Updated surrounding text, content type
and micro focus is taken into account all at once at commit.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Move the input_panel interface from desktop-shell to input-method (since
it is not really tied to desktop-shell).
Add an input_panel_surface interface like wl_shell_surface to make it
easier to extend it. Also add a parameter to the set_toplevel request to
be able to specify where to show an input panel surface on the screen.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Also add a separate preedit-cursor event and add a commit argument to
preedit-string to allow to support commit on reset. Fix editor and
keyboard example to adapt to the protocol changes.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Ideally the shell would send an unmaximize event to the client when
we try to move a maximized window, but for now, let's just prevent
moving maximized windows.
https://bugs.freedesktop.org/show_bug.cgi?id=56296
This introduces the function widget_cairo_create().
Instead of directly referencing surface->cairo_surface, use the function
widget_cairo_create(), which will create the cairo_surface as necessary,
and just returns a Cairo drawing context. Also fix window_get_surface()
similarly.
Now we can go through idle_redraw() without always creating Cairo
surfaces and committing them. This will be useful with sub-surfaces,
where repainting one sub-surface does not need to force the repaint of
all surfaces of a window.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Menu and tooltip redraw functions were using the surface size directly.
For consistency, make them use the widget size instead, it is the same.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Widgets should be rendering to a cairo_surface for a particular
wl_surface, just like buffers are per surface.
window_flush() has a change in behaviour: it will now send
wl_shell_surface.set_toplevel also without a cairo_surface to be
attached. This shouldn't change anything in practice.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
So that given a widget, we can access the surface specific data, like
buffers, and input and opaque regions.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
They are per wl_surface state.
The frame widget is always on the main surface, since it can be created
only for the window. That is why frame_resize_handler() can simply
assume that the surface is the main_surface.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Repaint and resizing widget recursions must start from the root widget
of each (sub-)surface, so that buffers and regions get initialized
correctly. Make it easier by moving the widget field from struct window
to struct surface.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
These are surface specifics, since buffers are surface specific.
SURFACE_HINT_RESIZE is moved together to the other SURFACE_* flags, so
that surface_create_surface() would not need two flags arguments.
struct toysurface::prepare vfunc checks for SURFACE_HINT_RESIZE, and
egl_window_surface_create() and shm_surface_create() check for the
non-HINT flags.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Fields 'allocation' and 'server_allocation' are surface specific. Fields
'saved_allocation', 'min_allocation', and 'pending_allocation' are
window specific, and will not be moved.
Field 'toysurface' is naturally surface specific, since it provides the
backing storage for the wl_surface.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Struct window has many fields that are directly related to the
wl_surface, more than to the window as a whole. When we start composing
a window from several wl_surfaces, these fields need to be per
wl_surface, not per window.
Start separating such fields from struct window into struct surface by
moving the wl_surface.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Handle the case when we the compositor somehow migrates from requiring
double buffering into working on single buffering, so we release the
extra shm buffer.
Currently, I do not think this can happen in practice, but in the future
it may happen with sub-surfaces.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Check for errors in the first wl_display_dispatch() call. Otherwise
doing something silly like
$ WAYLAND_SOCKET=999 ./clickdot
will segfault.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Make them explicitly mention EGL, otherwise one can easily think that
"failed to initialize display" refers to Wayland display.
Also explicitly mention falling back to wl_shm. I tested this with a
LD_PRELOAD trick that overrides eglBindAPI and makes it fail.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
weston-screenshooter is a helper binary that weston launches to write the
screenshot to disk. If somebody tries to launch it by hand, print a
warning and mention the screenshot keybinding.
This way libtool will remember the libtoytoolkit LIBADD libraries.
We can drop the toolkit_libs hack and just link to libtoytoolkit.la and
libtool will add the dependencies.
All the clients here were missing the global_remove handler. Because
window.c did not have it, weston-desktop-shell and weston-keyboard
segfaulted on compositor exit, as they received some
wl_registry.global_remove events.
Add more or less stub global_remove handlers, so that clients do not
crash on such events. Toytoolkit and all applications would need a lot
more code to properly handle the global object removal.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
We want to make sure that the matrix symbols are exported from weston and
that modules get them from there. To do that, we pull matrix.[ch] out of
libshared and back into weston. calibrator now also links to matrix.[ch]
and we add a IN_WESTON define to enable the WL_EXPORT macro when compiled
inside weston.
After a client has been double-buffering, and then switches to
single-buffering, it should release the 2nd buffer. That never happens
in practice here, so just add a comment and a check in case it ever
occurs in the future.
If we implemented the releasing now, it would be difficult to test.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
This a basic calibration tool designed for "in factory" calibration of a touch
screen. The constants for the calibration functions:
x' = Ax + By + C and
y' = Dx + Ey + F
Are printed on stdout when the calibration is completed.
In a few cases, we set a motion handler just to be able to set a fixed
cursor. This adds a default cursor helper that can be used in those cases.
In case of the 'transformed' test case, we also avoid a brief flicker
of the pointer cursor, which is set on enter when the move grab is lifted.
Change the boolean parameter 'resize_hint' into a bitmask 'flags'.
Note, that this flags is very different to the other flags used in
creating the toysurface implementations. They do not make sense to mix
one way or the other. Prepare() cannot change the surface type, and
surface constructors do not care for dynamic hint flags.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
When a window's buffer transformation is set, its buffers are
reallocated with the appropriate size (i.e., with width and height
swapped in case of 90 or 270 degree rotation).
Since the opaque region was set in frame_resize_handler(), if a client
created a frameless window setting the toplevel widget as opaque would
have no effect.
This patch fixes this by moving the call wl_surface_set_opaque_region()
to idle_resize(), and changing the latter function to set the whole
window as opaque if its toplevel widget has the opaque flag set.
To reproduce, launch the terminal, open a second window using Ctrl-Shift-N,
go back to the first window, and press Ctrl-D. The terminal's master FD gets
events even after being closed, causing terminal_destroy to be called twice
on the same object.
To fix this, I'm adding a function to stop watching an FD.
We were pulling in cairo and the image loading libraries through libshared.
Split out libshared into a core libshared and a libshared-cairo that
pulls in the extra libraries.
Listen for wl_buffer.release events in the shm path, and if a previously
posted buffer is still held by the server, allocate another one. The
maximum of two should be enough, since there is no point for a server to
hold more than one buffer at a time.
Buffer allocation happens as needed instead of window creation time.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
After the toysurface rewrite, windows do not have a valid Cairo surface
outside their repaint cycle, so tooltips are not getting their size
right.
Create a dummy Cairo surface only for querying text extents, so we do
not rely on any window surfaces of parent windows or otherwise.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Implement shm_surface as a sub-class of toysurface, and unify the
toysurface call sites removing most buffer type specific branching.
Do not destroy and create a surface, if the size does not change.
The resizing optimization of shm surfaces is retained, but the pool is
moved from struct window to struct shm_surface, since it does not apply
to egl_window_surface.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
We need more structure to the way we handle the backing storage in
toytoolkit, to make it possible to double-buffer the shm case properly.
The existing buffer handling is very complex with the three
different cases:
- EGLSurface backed Cairo surface with a window associated
- wl_shm backed Cairo surface with a window associated
- wl_shm backed Cairo surface without a window, as used by dnd.c
Introduce the toysurface abstraction, which defines the interface for
the both buffer handling cases that have a window associated. It also
means, that windows will not have a valid Cairo surface outside of their
repaint cycle.
Convert the EGLsurface case into toysurface for starters. For EGL-based
Cairo surfaces, the private data is no longer needed. Destroying
egl_window_surface will trigger the destruction of the cairo_surface_t,
not vice versa. This is possible because display_create_surface() is
shm-only.
The shm cases are left untouched.
As a side-effect, display_acquire_window_surface() and
display_release_window_surface() will no longer use the 'display'
argument. Instead, display will be the one inherited from the window.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Toytoolkit doesn't buy us anything in this case, we're not rendering or
handling regular input events. Just talk directly to wl_display and
look up the 'input_method' global directly.
The key events we pass through to the input_method_context has to have
a serial number that corresponds to the key event we got. The struct display
serial is updated on pointer enter/leave and keyboard events, but not the
input method keyboard events. So the display serial will never correspond
to the key event we're dealing with and we have to pass through the
serial we get from the key event.
This simple change allows you to drive the editor using the keyboard
(supporting backspace and delete and left and right arrow keys.) The idea
behind this change is to allow the testing of the interoperation between a
virtual keyboard and real one.
Signed-off-by: Rob Bradford <rob@linux.intel.com>
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Send state and modifier from the demo keyboard with the keysym event and
take them into account in the editor example.
Add some helper functions to write and read a modifiers_map array.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Rename the key event in text_model to keysym and add serial, time and
modifiers arguments. Add a modifiers_map event to transfer an array of
0-terminated modifier names, so that a mapping of modifiers to the
modifier bit mask is possible.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
This new client, called transformed, renders a cross with the top part
red and the right green, with the same transform as the output the
surface is in.
This is based on simple-egl.
If simple-egl is toggled fullscreen, the opqaue region is set for the surface
but never removed after exiting fullscreen. This patch resets the opaque region
to 0 if the surface is not fullscreen and -o was not passed. This fixes the
problem introduced sometime since d7f282b84e, when this was last fixed.
Nothing uses it to create EGL-surfaces outside of window.c. This makes
refactoring the EGL-based code easier, since we do not need to support
EGL-based Cairo surfaces without an associated struct window.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
cairo_surface_t objects have a private set, either struct
shm_surface_data, or struct egl_window_surface_data. Use separate
private keys for each type to avoid mismatch.
This makes display_get_buffer_for_surface() safe, in that it won't
return garbage for an EGL-based cairo surface.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Struct surface_data was not really useful, and it definitely was not
used with EGL-based windows.
This also fixes a semantic mistake, where struct shm_surface_data was
put into cairo_surface_t private, but got out as struct surface_data
instead. Due to struct layout, however, this did not cause a real bug.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Leftovers from
commit f02a649a3c
Author: Kristian Høgsberg <krh@bitplanet.net>
Date: Mon Mar 12 01:05:25 2012 -0400
Consolidate image loading code and move to shared/
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
I do not think these are meant to be called by the applications
directly. Applications certainly do not have to call them.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Change simple-shm to properly process the wl_buffer.release event, and
not reuse a buffer until it is released by the server, as specified in
the protocol.
In case the server has not released the buffer, but signals that it has
been shown (frame callback), allocate a second buffer. Simple-shm will
now automatically do double-buffering if needed.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
XKB provides keypad symbols in a separate namespace. We don't care
about the distinction, so map them to normal symbols before starting
processing.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Avoids a segfault whenever we get a key event, and try to set the
cursor, dereferencing a NULL input->pointer.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
The break statement wasn't copy and pasted along with the rest of the code
causing menu item before it ("Move to workspace below") to fall through to
the fullscreen case.
We need to clamp or center on a per axis basis. If the window is wider
but the image is taller, we need to center horizontally but
clamp vertically. We can only do that if by combining the two
functions.
The intended behavior is that a quick click (press and then release
within 500ms) just pops up the menu and doesn't select anything. Then
we can mouse around and and click to select an item. Alternatively, a
click and hold (ie press and release after 500ms) lets you press right
button, mouse down on the menu item you want and release to select it.
This is how menus work in most toolkits.
The handling in weston is fine, it's there to handle the case where
the button release happens outside any client window, since the client
doesn't get those events. If such a release happens late or we get a
second release outside the popup window we shut down the popup.
The problem is in toytoolkit, where we need to select the item if we
get a release within 500ms or if we get a second release. A second
release is the case where the first release came after 500ms and
didn't pop down the menu, and the second release event is from a click
on a menu item.
https://bugs.freedesktop.org/show_bug.cgi?id=52456
If clients don't set a cursor, they get whatever the last cursor was
before the pointer entered their window. That's a little confusing, so
set a pointer on enter to avoid that. The down-side is that simple EGL
isn't very simple anymore.
https://bugs.freedesktop.org/show_bug.cgi?id=52452
Toytoolkit does not support setting opaqueness for anything else than
the immediate child widget of the frame widget. Backgrounds do not have
frames, so we need to poke it in manually.
This should allow Weston to paint the background without blending.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Grabbed widgets should always receive motion events as if it was the
widget that would receive it if no grab was active. This means that the
focused widget should always be passed as the widget argument to widget
motion handlers.
This reverts commit 8c9c8fcf6e.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
The simple clients all just call wl_display_dispatch() in a while loop
without checking the return value. Now, if the server dies or other
error occurs, we get a -1 return value instead and need to break the loop.
Do not build the tablet-shell client if --disable-tablet-shell is given.
Change --enable-tablet-shell to --disable-tablet-shell in ./configure
--help output, since it is enabled by default. Add a description.
Use proper quoting in the conditional.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
since it doesn't use any of them. Fixes a build failure on systems,
where (E)GL headers are in non-standard path.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Separate simple EGL clients from other simple clients. This allows to
build either simple-shm or simple-egl, whichever you want. We avoid
linking libEGL and GLESv2 into simple-shm, and we can build simple-shm
even if nothing provides EGL, GLESv2, or wayland-egl APIs.
Change the options in configure --help from --enable to --disable, since
these are enabled by default, and you would normally only ever give the
--disable flavor. Add descriptions.
Remove the #define BUILD_SIMPLE_CLIENTS since it is not used.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
configure.ac: The toytoolkit clients used to get libEGL linked to them
even if there was no cairo-egl. This is useless, and actually harmful on
platforms, where libEGL absolutely requires one of the GL ES libraries
to be linked in, too.
Look for EGL-related packages only for cairo-egl with toytoolkit.
window.c: protect all GL header includes with HAVE_CAIRO_EGL, since that
is the only case we can support EGL, GL, or GLESv2 at all. In the case
we do not have cairo-egl, add enough definitions to let us build the
stubs for EGL-related functions.
Remove some #ifdefs that were inside of the same #ifdef already.
These changes allow to build sorfware rendering toytoolkit clients
without any bits of EGL libs or headers.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Support for zooming by using ctrl + the vertical axis (scrolling upwards
zooms in) and panning by both the horizontal and vertical axis as well
as click and drag was added to demonstrate how axis should work.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
If the keyboard modifier event was received after the key event the
modifier state would end up incorrect.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Callbacks registered via display_set_output_configure_handler() are
promised to be called when we know the current mode for the output. If
the following order of events happens:
1. toytoolkit binds to a wl_output global
2. application registers an output configure handler
3. the wl_output.mode events are received
Then in step 2 we would call the callback with uninitialised output
informations, giving it a 0x0 size.
To avoid such race, do not call the callback from
display_set_output_configure_handler() if the output has 0x0 size.
The wl_output.mode event will be received later, and that will trigger
the right call to the callback.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Apply wl_surface.frame request only on the next wl_surface.commit
according to the new protocol.
This makes it explicit, which repaint actually triggered the frame
callback, since commit schedules a repaint. Otherwise, something causing
a repaint before a commit could trigger the frame callback too early.
Ensure all demo clients send commit after wl_surface.frame. Note, that
GL apps rely on eglSwapBuffers() sending commit. In toytoolkit, it is
assumed that window_flush() always does a commit.
compositor-wayland assumes renderer->repaint_output does a commit.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Make input region double-buffered as specified in the new protocol.
While doing it, get rid of the undef region code, and instead use a
maximum sized real pixman region. This avoids special-casing regions
that might sometimes be undef.
As the input region is now usable by default instead of undef,
weston_surface_update_transform() does not need to reset the input
region anymore.
weston_surface_attach() no longer resets the input region on surface
size change. Therefore, also weston_seat_update_drag_surface() does not
need to reset it.
Update toytoolkit to set input region before calling wl_surface_commit()
or swapBuffers (which does commit).
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Make wl_surface.set_opaque_region double-buffered as required by the new
protocol. Also, do not reset the opaque region on surface size changes
anymore. Only explicit requests from the client will change the region
now.
In clients, make sure commit happens after setting the opaque region.
Mesa does not need a fix, as it never touches the opaque region.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
This change depends on the Wayland commit
"protocol: double-buffered state for wl_surface".
Implement double-buffering of damage in the compositor as required by
the new protocol.
Ensure all Weston demo clients call wl_surface_commit() after
wl_surface_damage().
Mesa does not need a fix for this, as the patch adding
wl_surface_commit() call to Mesa already takes care of damage, too;
Mesa commit: "wayland: use wl_surface_commit()"
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Use wl_surface_commit() to commit the buffer attach, as Weston now
requires.
NOTE: GL-applications are broken until you upgrade to a version of Mesa
which does wl_surface_commit() on eglSwapBuffers(). If you have
Cairo-gl, this means all toytoolkit apps, too.
simple-shm and simple-touch OTOH will work now.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add THEME_FRAME_MAXIMIZED flag so the theming system can know not to draw
shadows for maximized windows. This allows maximized surfaces' content to be
sized and placed in a more expectable fashion.
If the for loop does not match on a button it will fall through and try and
dereference into the array using the terminating value of the loop. This
terminating value of the loop is the dimension of the array and thus beyond
its bounds.
Cc: Jan Arne Petersen <jpetersen@openismus.com>
Signed-off-by: Rob Bradford <rob@linux.intel.com>
The workspace state parameters were initialized after the first
roundtrip. If a workspace manager state event was received during this
roundtrip the state parameters were cleared leaving an incorrect state.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
desktop-shell never returned from display_run() since it
was essentially killed when weston exited. To fix this,
it is necessary to watch for EPOLLHUP in window.c so that
toytoolkit clients will return from display_run() when
weston quits. This allows for clients to clean up
as needed.
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Compute the nearest glyph edge instead of taking the one to the
left of the cursor.
Also fixes a segfault when trying to compute the position for an empty
buffer.
Since commit 6a615d2621 [1], the opaque
region would be set only when running fullscreen. Having it set
properly for the windowed case is helpful to test the overlay path in
compositor-drm.
What this patch does is:
- reverts the above commit;
- remove the "if fullscreen make the window opaque" conditional, that
should have been removed when -o was introduced and was actually the
cause for the bug solved in [1];
- sets the opaque region when running fullscreen, regardless of the -o
switch.
[1] commit 6a615d2621
Author: Scott Moreau <oreaus@gmail.com>
Date: Thu Aug 30 14:44:16 2012 -0600
simple-egl: Only set alpha_size=0 when -o is passed.
v2: - Clarify in the commit message that this does not regress the bug
solved in [1].
- Use the correct sha1 for the reverted commit.
Add a reset request to the text_model interface and a reset event to the
input_method_context interface. Use it to reset the pre-edit buffers in
the example keyboard when the cursor is moved in the example editor
client.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Add key event to the text_model interface and a key request to the
input_method_context interface. Implement it in the example editor
client and the example keyboard.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Add delete_surrounding_text event in the text_model interface and the
request in the input_method_context interface. Implement it in the
example editor client and in the example keyboard so that the backspace
key works with it.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Add support of preedit-string to the example editor client. Also add a
preedit_string request to the input_method_context interface and use
that in the example weston keyboard to first create a pre-edit string
when entering keys and commit it on space.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Add support for a proper qwerty virtual keyboard layout with lowercase
and uppercase state, space and enter button.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
It makes sense to split the interfaces in a text and a input-method
protocol for now (only the text protocol needs to be used in toolkits).
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Add cursor and anchor positions as arguments to the set_surrounding_text
request. The cursor and anchor positions are relative to the surrounded
text, so it does not make sense to have that separate. Remove the
separate set_cursor_index and set_selected_text requests. Also update
the corresponding event in input-method-context and add support for it
in the weston example keyboard.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Add an input_method_context interface which is the representation of a
text_model on input_method side.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Remove the wl_surface argument from create_text_model request. The
wl_surface is specified as an argument in the activate request instead.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
The existing algorithm had some corner cases (pun!), where it failed to
produce correct vertices in the right order. This appeared only when the
surface was transformed (rotated). It also produced degenerate polygons
(3 or more vertices with zero polygon area) for non-transformed cases
where the clipping and surface rectangles were adjacent but not
overlapping.
Introduce a new algorithm for finding the boundary vertices of the
intersection of a coordinate axis aligned rectangle and an arbitrary
polygon (here a quadrilateral). The code is based on the
Sutherland-Hodgman algorithm, where a polygon is clipped by infinite
lines one at a time.
This new algorithm should always produce the correct vertices in the
clockwise winding order, and discard duplicate vertices and degenerate
polygons. It retains the fast paths of the existing algorithm for the
no-hit and non-transformed cases.
Benchmarking with earlier versions showed that the new algorithm is
a little slower (56 vs. 68 us/call) than the existing algorithm, for
the transformed case. The 'cliptest f' command before and after this
commit can be used to compare the speed of the transformed case only.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Acked-by: Rob Clark <rob.clark@linaro.org>
Cliptest is for controlled testing of the calculate_edges() function in
compositor.c. The function is copied verbatim into cliptest.c.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Two buttons are added to the right-click menu of the window frame for
moving a surface either up or down.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
After explaining the problem on irc, Pekka dictated this solution which works.
The problem is that simple-egl can hang when toggling fullscreen because of a
race where (quoting Pekka) "if it dispatches the frame callback simple-egl
itself requested before the Mesa's own frame callback came, simple-egl will go
to its redraw routing and call eglSwapBuffers so you end up effectively calling
eglSwapBuffers from within eglSwapBuffers, and deadlock". This patch avoids
redrawing (which calls eglSwapBuffers) when there is a pending frame callback.
When starting simple-egl with -f for fullscreen and toggling to 'windowed' mode with F11,
the surface is opaque instead of semi-trnasparent as it is when starting without -f. We
only want to create the surface with alpha_size=0 when the user explicitly passes -o
because otherwise it will never have the ability to use alpha.
The correspondence between cursor functions and names of cursors has
never been standardized. As a consequence, each cursor function can be
represented as a cursor with one of several names. Be more robust when
loading cursor by trying all known names that correspond to a cursor.
This should fix https://bugs.freedesktop.org/show_bug.cgi?id=50487
and https://bugs.freedesktop.org/show_bug.cgi?id=52609 a bit more
thoroughly.
This is a workaround for screenshots with transformed outputs. It reorders
the output positions so the correct buffer size is determined for the final
image. This assumes the outputs are in succession on the x axis. The outputs
are rendered in their transformed state.
E.g. this can happen when you grab the lower right corner of a window
and move over the top of the window when resizing. In this case, the
changed width is still important and should be acted upon.
https://bugs.freedesktop.org/show_bug.cgi?id=53560
This patch, along with the wayland patch, adds the ability to specify
a cursor theme in the weston.ini file:
[cursors]
theme=THEME_NAME
If specified, than Weston can use a specific X cursor theme for the
pointer. This relies on the 0001-Add-support-for-X-cursor-themes.patch
for wayland.
[krh: edited to use shell section and key name cursor-theme]
Add a wl_seat argument to the activate and deactivate requests of
text_method.
On activation a text_model gets assigned to the input_method of the
wl_seat specified in the activate request.
The variable '__environ' seems to be libc implementation specific, and
not avaible on Android.
Use the POSIX standard variable 'environ', which also luckily happens to
be available on Android, which is not POSIX.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Fix the off by one error in checking whether we can draw the marker
without exceeding buffer dimensions.
Fixes a segfault.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Make simple-egl toggle the fullscreen state whenever the key F11 is
pressed. A sync callback is used to stop drawing while the surface has
not received the configure event, to prevent a buffer with the windowed
size to be attached to the surface after the set_fullscreen request.
We now support specifying environment variables and arguments in launchers
by saying
path=GDK_BACKEND=wayland gnome-terminal --full-screen
for example.
https://bugs.freedesktop.org/show_bug.cgi?id=47920
This is necessary because all clients need a way to create
text_models, but only one client at a time can be bound to
the input_method global (else we don't know to whom we are
supposed to send events).
We default to setting the minimum size to the initial size. To set a
different minimum size than the initial size, set the minimum size first
then then initial size. Good enough for a toy toolkit.
https://bugs.freedesktop.org/show_bug.cgi?id=50263
It is possible that a client loses the focus between receiving a
pointer.enter event and sending a pointer.set_cursor request. In that
case, the cursor surface might not be mapped and the frame callback
requested on it will never trigger.
Work around this by trying to remap the cursor surface whenever there
is a frame callback and the serial for the enter event is higher than
the cursor serial.
window.c:1173:6: warning: ignoring return value of ‘read’, declared with attribute warn_unused_result [-Wunused-result]
desktop-shell.c:305:6: warning: ignoring return value of ‘read’, declared with attribute warn_unused_result [-Wunused-result]
With the wayland change to automatically allocate the client side proxy
manually, we can now drop the code (and the FIXME) that did that and just
receive the proxy from the callback arguments.
