Adding some helper methods to the Local and remote devices
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26011 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added a bit more (visual) information about the spool file format
* rename Configuration to PrintServerMessenger (still not the best name)
* remove ConfigPage{Job}Thread as both share the same code and make it privte in PrintServerMessenger
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25966 a95241bf-73f2-0310-859d-f6bbb57e9c96
InvalidateLayout().
This fixes#1461, the bug appeared because DraggableContainerIcon uses a special trick, involving changing the resizing
mode, to get the total width of the menu items. (see tracker/ContainerWindow.cpp line 479)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25948 a95241bf-73f2-0310-859d-f6bbb57e9c96
We now keep track of a lower bound as to when the list should scale
itself back down. When increasing the list size, we double the current,
with the lower bound set to 1/4 of the current size, not allowing it to
go any smaller than the block size. These combined allow us to do very
cheap tests to see if an operation requires a resize at all, and minimize
how often the list actually needs to be resized, since the difference in upper
and lower bounds prevents bouncing back and forth between a size in the case
of adding/removing an item while close to a boundary. All in all this should
make BList noticably more scalable when doing large numbers of add/remove
operations.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25946 a95241bf-73f2-0310-859d-f6bbb57e9c96
When changing to icon mode with a size other than 32 (ie: kScaleIconMode) PoseView calls Refresh() and all the poses are
removed and loaded again (PoseView.cpp line 1995). This called AddPoses but didn't check for ShowDiskIcon(). The Disks icon
was shown on startup though, since Tracker uses another code path when starting (caching?).
This fixes#1833.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25941 a95241bf-73f2-0310-859d-f6bbb57e9c96
the delta.
For example, MoveBy(-0.5, 0.0) would do nothing in this case:
roundf(150.0 - 0.5) = 150.0, when rounding the delta it gives the
expected value: roundf(150.0 + roundf(-0.5)) = 149.
On the other hand, BView::ResizeBy was doing it right, and this
explains the bug in Cortex (#333). Cortex was doing
scrollBar->MoveBy(-0.5,0) then scrollBar->ResizeBy(0.5,0) and the
inconsistency lead to the visual bug. (see StatusView::MouseMoved())
This fixes#333. The bug was strange to reproduce since sometimes the
point received in MouseMoved would be "some_integer+0.5" values
sometimes just integral. This has still to be investigated though not
problematic here anymore. See cortex/RouteApp/StatusView.cpp line 222.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25930 a95241bf-73f2-0310-859d-f6bbb57e9c96
in Cortex). This happened only when needing a tabbed view. It will now return a view with the
most fitting size. This fixes#597
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25923 a95241bf-73f2-0310-859d-f6bbb57e9c96
we now double/halve the current size of the list, starting with the constructor blocksize as a baseline.
This has the net effect that when doing large numbers of inserts/removes, the number of resize operations
needed scales logarithmically to the number of operations, which should yield a decent performance
improvement in such cases.
Review welcome. This does not yet affect ticket #2363 that I'm aware of, as I'm currently in the process
of attempting to find a copy of said app to test with.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25916 a95241bf-73f2-0310-859d-f6bbb57e9c96
leave a unusable gap on the right (or down) of the thumb.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25897 a95241bf-73f2-0310-859d-f6bbb57e9c96
always Bounds() now.
This fixes#361, again we're better than R5! Although in this test case, the scrollbars shouldn't be activated in the first place. In icon mode the poseview is still putting too much white space on
the left (x<0) and make the scrollbars show. Fix is almost ready :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25896 a95241bf-73f2-0310-859d-f6bbb57e9c96
session to also include each view's individual update rect (in screen coords).
Should actually not be mush slower than the old version, and hopefully makes
it possible to have smarter BView::Draw() implementations which should make
more than up for any potential speed loss.
* Removed unused version of View::AddTokensForViewsInRegion().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25879 a95241bf-73f2-0310-859d-f6bbb57e9c96
play any more clips." Of course I was searching in my own commits. In the
end, I resorted to binary searching revisions for when this broke. Turns out
it is your change r25793/r25794, in which you forgot to attach the colorspace
to the app_server message. Which of course makes it lock up. Another of those
instances where you think passing data structures between client and app_server
instead of this "protocol" would be the better idea...
* Fixed bitmaps_support_space() retrieving the currently supported overlay
flags for a given color space. This makes MediaPlayer play files again, the
media node connection would time out because of the broken app_server
communication. (I have not tested this change yet, but I will in a minute, on
a different computer.)
* Also retrieve the overlay supported flag for YCbCr colorspaces.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25847 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Slightly more debug output for failed atempts to create a decoder.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25825 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added B_BITMAPS_SUPPORT_OVERLAY flag to indicate overlay support for the
color space.
* Rewrote GraphicsDefs.h - the previous one was obvious a copy of the Be header,
including typos and strange white space. I was a bit lazy with respect to
the color space details, and mostly trusted the information provided by the
Be header else.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25793 a95241bf-73f2-0310-859d-f6bbb57e9c96
zero, otherwise we leak these plugins, since the ref counting is based
on the plugin still being in the list.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25792 a95241bf-73f2-0310-859d-f6bbb57e9c96
from Scooby nearly the same as on R5 (still misses the gray header color)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25769 a95241bf-73f2-0310-859d-f6bbb57e9c96
bitmap support (bitmaps support child views or BViews can
draw them)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25762 a95241bf-73f2-0310-859d-f6bbb57e9c96
to give other windows the opportunity to mark the icon invalid before
recaching it.
* Since we currently update all app MIME types on first boot, over 400 messages
are generated, so that delay easily caused the message queue to get full.
* I've now reduced the wait to 10 ms, and also call BWindow::UpdateIfNeeded()
afterwards, which empties the message port, too. This fixes bug #2212.
* Note though, this should be handled completely different to make it really
work right.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25719 a95241bf-73f2-0310-859d-f6bbb57e9c96
Patch by genki0. I didn't see any reason not to commit it, so...
This should fix#897.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25656 a95241bf-73f2-0310-859d-f6bbb57e9c96
from Scooby, it would draw all child views on top of each other...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25580 a95241bf-73f2-0310-859d-f6bbb57e9c96
guarantees that the virtual hook is called in all cases, and fixes bugs 1252 and 1838.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25559 a95241bf-73f2-0310-859d-f6bbb57e9c96
message correctly, it is a bit strange why the message should not follow
protocol.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25499 a95241bf-73f2-0310-859d-f6bbb57e9c96
are NULL pointers anyway, we just adjust argc.
* Made argv processing more safe, it will now check if the allocation of the
argv array succeeded in the first place.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25496 a95241bf-73f2-0310-859d-f6bbb57e9c96
properly credit James Woodcock, who debugged this problem and whom I forgot
to mention in my previous commit. Sorry!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25495 a95241bf-73f2-0310-859d-f6bbb57e9c96
_ArgvReceived(), the array elements still need to be set to NULL otherwise
the function will free() random pointers at the end.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25494 a95241bf-73f2-0310-859d-f6bbb57e9c96
the internal enumaration for GetNextDiskSystem(). The compiler spotted that
one actually... :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25490 a95241bf-73f2-0310-859d-f6bbb57e9c96
to contain headers shared by kernel and userland (mainly libroot).
* Moved quite a few private kernel headers to the new location. Split
several kernel headers into a shared part and one that is still kernel
private. Adjusted all affected Jamfiles and source in the standard x86
build accordingly. The build for other architectures and for test code
may be broken.
* Quite a bit of userland code still includes private kernel headers.
Mostly those are <util/*> headers. The ones that aren't strictly
kernel-only should be moved to some other place (maybe
headers/private/shared/util).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The built-in services are no longer added as resource to libnetwork,
but as attribute. This removes the libbe dependency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25485 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added BDiskDeviceRoster::GetDiskSystem() method, that can get a disk system
by short/pretty/module name - since they should all be unique, I put them
in a single namespace, please complain if you don't like that :-)
* Cleaned up DiskSystem.h and DiskDeviceRoster.h according to the updated
header guidelines.
* Renamed ntfs pretty name from "ntfs File System" to "Windows NT File System".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25414 a95241bf-73f2-0310-859d-f6bbb57e9c96
There are many other calls that crash in BeOS when called with invalid args, should we attempt to sanitize them or call debugger() instead ?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25372 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Implemented BMediaFile::Copyright, which just calls Copyright() of the extractor. So this is just a simple pass through.
- Style cleanup (mostly whitespaces)
Problem is that our readers currently return the copyright of the source code, not the copyright of the MediaFile itself, like the BeBook documents. Thus, we might need to change all readers to return appropiate data or behave differently for Haiku readers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25356 a95241bf-73f2-0310-859d-f6bbb57e9c96
it does now accept directories and doesn't ignore the "recursive"
parameter anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25308 a95241bf-73f2-0310-859d-f6bbb57e9c96
by BWindow, no longer by the app_server. This should stop the "screen freeze"
effect.
This adds a dependency on libpng.so and libz.so to libbe.so. The same
dependencies and the PNGDump code added here can be removed from the
app_server. I am just waiting for a code review of this before doing that.
This implementation still does not give the client a chance to handle it
differently.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25269 a95241bf-73f2-0310-859d-f6bbb57e9c96
this (seems to be what R5 BStatusBar does):
* combine the "trailing text" with the "trailing label" and truncate the
resulting string on the left side according to the width of the entire
control
* combine the "label" with the "text" and truncate that on the right side
according to the space left by the right hand text.
-> No more overlaps (theoretically, in practise there are still overlaps
because our BFont::TruncateString() does not respect the width in some
situations.)
* Changed _SetTextData() accordingly, it is not used anymore for the
label and trailing label, and could therefor be simplified a little.
* fixed _BarFrame() to not return fractional coords, which could sometimes
leave a dirty line of pixels.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25244 a95241bf-73f2-0310-859d-f6bbb57e9c96
defined/undefined to numeric values (0 for undefined). This allows for
trace levels.
* Set SYSCALL_TRACING_IGNORE_KTRACE_OUTPUT default to 1, since this is
what one usually wants.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25213 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Export a fake _get_port_message_info_etc() for KMessage in libbe_haiku.so
This fixes the build of the app_server test environment.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25202 a95241bf-73f2-0310-859d-f6bbb57e9c96
it couldn't find the class on first try. This fixes the problems mentioned
by Shinta as part of bug #2086.
* Got rid of GetNumber() - there is a POSIX function strtoul() for exactly
this purpose.
* demangle_class_name() can now fail.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25179 a95241bf-73f2-0310-859d-f6bbb57e9c96
- get_new_fd() now checks if we are dealing with attributes before deciding to
bail out on a locked vnode.
- Enabled locking in MailSettings again as it now works.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25162 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Creating 2 chains at the same time will result in problems now, but this is
something unlikelly to happen (although not impossible).
- Added TODOs related to this.
- MDR is usable again inside Haiku and you can actually send emails when
creating a mixed inbound/outbound account.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25160 a95241bf-73f2-0310-859d-f6bbb57e9c96
Node Locking
Another feature provided by the BNode class is "node locking": Through BNode's
Lock() function you can restrict access to the node. The lock is removed when
Unlock() is called, or when the BNode object is deleted.
There is still something wrong with locking though. For example, it looks like
WriteAttr() fails on the node when we lock it (File Busy) but it should not.
The lock acquirer should be able to call WriteAttr() on it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25158 a95241bf-73f2-0310-859d-f6bbb57e9c96
or else the server will keep working with the state and especially a clipping
region which should not be effective anymore. This fixes one problem I could
observe with my test app.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25154 a95241bf-73f2-0310-859d-f6bbb57e9c96
PushState() should be at the top of the state related methods.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25153 a95241bf-73f2-0310-859d-f6bbb57e9c96
possible on the server side (for example Show() and Hide() need to be
immediate). But also SetViewColor() and a few others. This fixes the
bug encountered in Pairs.
* Removed NOTE in DrawAfterChildren(), since it was outdated.
* Corrected a typo in a comment.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25145 a95241bf-73f2-0310-859d-f6bbb57e9c96
instead, it will now use the image_id parameter to store errors in.
* find_instantiation_func() and validate_instantiation() will no longer
overwrite errno with B_OK.
* Made private functions static, and moved them to the top.
* If the class name starts with '_', it will now try to add a BPrivate namespace
in case it could not find the class. This should help with the compatibility
issues Shinta reported (also part of ticket #2086).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25124 a95241bf-73f2-0310-859d-f6bbb57e9c96
a broken archive - it will now create a new _BTextInput_ child, if it couldn't
find one. This fixes#2086.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25123 a95241bf-73f2-0310-859d-f6bbb57e9c96
given to it when the replicant was first added. This had the net
effect that any on the fly changes such as the color drops allowed
by the Activity Monitor replicant were discarded. Fixed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25113 a95241bf-73f2-0310-859d-f6bbb57e9c96
* layout the view even in the case of an unarchived one
* this should finally fix#2121
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25106 a95241bf-73f2-0310-859d-f6bbb57e9c96
setting to force BLockers to be semaphore style. This may help with
debugging deadlocks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25096 a95241bf-73f2-0310-859d-f6bbb57e9c96
this fixes bug #1762 (Installer: trying to close it via alt+q shows warning twice)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25084 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduced a new get_rgb_color(), that returns an rgb_color from a host endian
uint32.
* Those two together fix bug #2094.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25031 a95241bf-73f2-0310-859d-f6bbb57e9c96
remove them all in RemoveView().
* Also, previously, the wrong LayoutItem could be removed if there was any
view that had more than one item around.
* IOW using BView::RemoveSelf()/RemoveChild() yourself would have leaked
memory in the best case, and would otherwise crash your app if there was
any view with more than one LayoutItem.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25024 a95241bf-73f2-0310-859d-f6bbb57e9c96
why the latter is then even added, but we do the same thing as BeOS now.
* This fixes bug #2075.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24997 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed BView::Alignment() to LayoutAlignment() which fixes a ton of warnings
and some conflicts with BControls.
* Added virtual destructor to BRefFilter in case the GCC version is 3 or newer
(can't do it for GCC 2.95.3, since that would break binary compatibility
AFAIKT)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24983 a95241bf-73f2-0310-859d-f6bbb57e9c96
BMenuItem and BWindow are no longer friends of BMenu, but use this class
instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24909 a95241bf-73f2-0310-859d-f6bbb57e9c96
- The net_stack driver is no longer used. Instead we have a kernel
module which is directly used by syscall implementations in the
kernel. I.e. we no longer tunnel those functions through ioctls, but
have normal syscalls.
- Removed the superfluous net starter module.
- Implemented the FDTYPE_SOCKET type file_descriptors, that is sockets
are no longer vnode based.
- Adjusted libnetwork (the socket function implementations)
accordingly.
- Adjusted netstat accordingly.
* Socket module:
- Implemented socketpair().
- Added "kernel" parameter to the control hook. Quite a few more hooks
would actually need the parameter, but I didn't change those yet,
since that would probably also require changes to the protocol
module interface.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24908 a95241bf-73f2-0310-859d-f6bbb57e9c96
_init_interface_kit_() in there.
* Moved private get_mode_parameter() into the BPrivate namespace.
* Renamed interface_misc.h to InterfacePrivate.h.
* Minor other cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24869 a95241bf-73f2-0310-859d-f6bbb57e9c96
avoid the problem noticed by Andrea Anzani (can you check, please ?)
where the tracker menu would close when moving the mouse too fast.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24863 a95241bf-73f2-0310-859d-f6bbb57e9c96
with B_USB_* and the command union is now usb_raw_command.
* Changed usb_raw and the BUSB* classes accordingly.
* Moved the raw_device struct into usb_raw.cpp as suggested by Francois as it
was the only thing usb_raw_private.h defined.
* Removed usb_raw_private.h again because of the above.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24861 a95241bf-73f2-0310-859d-f6bbb57e9c96
name, as it in fact is like a kit in the kit. It combines the different BUSB*
classes as compared to SerialPort.h where there really is a 1:1 relationship
between the header and the (one) class. If someone has a better fitting name
please shout.
Separated the usb_raw.h into usb_raw.h which defines the protocol and
usb_raw_private.h which holds the internal device structure for usb_raw. This
reduces the header dependencies.
Hopefully cought all occurencies of USBKit.a usage (in usb_dev_info and
the usb_webcam media add-on) but might have missed something that is not in
the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24858 a95241bf-73f2-0310-859d-f6bbb57e9c96
my brain, while the left side is still puzzled. So it's hard to put it into
words. Basically, there was an unwanted feedback loop when applications first
scrolled vertically and then horizontally (or vice versa). Because of the
feedback effects between BView and controlling BScrollBar, and because BView
controlls both scrollbars at once, it is important not to set the scrolling
offset of an unaffected ScrollBar, since we might actually be comming from the
SetValue() function of the other scrollbar. Fixes#1913 and possibly more,
going to check up on the other scrolling related bugs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24841 a95241bf-73f2-0310-859d-f6bbb57e9c96
that it has when you never set it, uses the large step to figure out the
proportion it should display. This fixes Pe's scroll bars to display the
"correct" proportion. Of course the proportion is only correct if the large
step indeed equals the page size. Fixes#1758.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24838 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed line breaks to not exceed 80 char limit.
* Removed any trailing spaces.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24836 a95241bf-73f2-0310-859d-f6bbb57e9c96
* It's not a good idea to archive fProportion as int32, seeing it's a float
on [0..1].
* Implemented archive constructor for BScrollBar. Untested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24832 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The count/info view in Tracker truncates the text in a better way when
it does not fit, and also used the space of the barber pool when it isn't
displayed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24764 a95241bf-73f2-0310-859d-f6bbb57e9c96
functions by ones reading /etc/{group,passwd}.
* Added quasi-standard getpwent_r() and getgrent_r().
* Added _SC_GETGR_R_SIZE_MAX and _SC_GETPW_R_SIZE_MAX sysconf()
constants.
* Moved initgroups() and getgrouplist() definition to grp.cpp. They use
the same backend as the <grp.h> functions.
* Set the permissions of files created by the build system to what they
should be on the image (executables: 755, others: 644). Otherwise only
root could do anything under Haiku.
* Added build system variables HAIKU_ROOT_USER_NAME and
HAIKU_ROOT_USER_REAL_NAME to customize name and real name of Haiku's
root user.
* Added build system rules AddUserToHaikuImage and AddGroupToHaikuImage
for adding additional users and groups (by default only root user and
group and a "users" group are created).
* Adjusted BIND port and coreutils config.h files according to what
features have become available.
* Fixed HAIKU_DOCUMENTATION_OBJECT_DIR definition. Untested, but it used
a wrong variable name before.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24750 a95241bf-73f2-0310-859d-f6bbb57e9c96
* rewrote parts of Begin/CommitJob, _StartPage, SpoolPage, _EndLastPage and _AddPicture
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24693 a95241bf-73f2-0310-859d-f6bbb57e9c96
* followed Rene' sugestion and constrain the clipping region, still we only
get the "user" visible view region drawn, so there might be an other problem
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24687 a95241bf-73f2-0310-859d-f6bbb57e9c96
* resolved TODO in _RecurseView(), no need to call Draw() on views
that are hidden or miss the B_WILL_DRAW flag, as there Draw()
function would never be called according to the BeBook documentation
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24686 a95241bf-73f2-0310-859d-f6bbb57e9c96
* DrawState::SetOrigin needs to take the view scaling into account
* set the orgin in BPrintJob, to be able to print more then one page properly
Note: This would make printing work on HAIKU as on BeOS, but still it does
not because of 1; BPortLink size limit and 2; because we can only print/ draw
the visible region of a view? I had to resize StyledEdit to a i.e 10000
to test and to be able to print the full syslog.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24682 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented BFileInterface class which was nearly empty so far. Added handling of messages passed to BFileInterface class.
* Added needed structs and message values to DataExchange.
* This is needed to get for instance the reader.media_addon to work. Usually one calls above functions to set a file to be decoded by the node. If the target is a consumer, they are used for setting the target for encoding data.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24671 a95241bf-73f2-0310-859d-f6bbb57e9c96
- The kernel stores the group IDs in the team structure. They are
correctly inherited on fork() and load_image_etc().
- Implemented getgroups() for real, i.e. it retrieves the groups
associated with the process.
- Implemented setgroups(), initgroups() and (the BSDish)
getgrouplist(). The latter two read the group information from the
"group database" /etc/group (if existing).
- Change the BIND port config, since we do have getgrouplist() now.
* The set-uid feature was broken when the path to the executable was
relative, since we used stat(), which, in the kernel, uses the kernel
IO context.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24669 a95241bf-73f2-0310-859d-f6bbb57e9c96
* implemented BControllable::StartControlPanel(). The behaviour is supposed to be the one documented in the BeBook, meaning that it first checks if the BControllable node has been instantiated over an BMediaAddOn. If so, we investigate where the addon is located and try to launch it. Thus media_addons which have a control panel need to be compiled as an Application, not as an Addon. See r24664 as an example.
* inside BControllable::HandleMessage() call StartControlPanel for the message.
* MediaNodes having such a ControlPanel are rarely used as parameterwebs should provide you everything. But for instance the vst MediaAddOn uses it and some others do as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24665 a95241bf-73f2-0310-859d-f6bbb57e9c96
<arpa/inet.h>. Since they are renamed to __inet_*() by means of macros
(why anyway?), the functions won't be found e.g. by configure scripts
not including the header. Makes OpenSSH even more happy.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24646 a95241bf-73f2-0310-859d-f6bbb57e9c96
Moved nameser_compat.h to our public headers (arpa/inet) and include in
<arpa/nameser.h>. That's solved similarly in BONE. At any rate OpenSSH
is now happy that HEADER exists.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24644 a95241bf-73f2-0310-859d-f6bbb57e9c96
replicant failed as pointed out by Mark Hellegers.
* Clarified ownership of the passed in message in TReplicantTray::AddIcon()
as well as BShelf::_AddReplicant().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24621 a95241bf-73f2-0310-859d-f6bbb57e9c96
finally created a solution to avoid that: Header files that contain
configuration settings (and nothing else) go to build/config_headers.
To change settings, create a directory build/user_config_headers (which
is ignored by svn), copy the respective header there and modify it at
your leisure. Currently only tracing_config.h has been moved to the new
location, but more files will follow eventually. It is also recommended
to move optional macro definitions in Jamfile (as for BFS) to a config
header instead; the build system will then automatically rebuild on
changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24611 a95241bf-73f2-0310-859d-f6bbb57e9c96
Marius Middelthon - Thanks!
* Sorted vector icons a bit more like original bitmap icons.
* Renamed BeBox icon to Root icon.
* Commented out some dead code which caused a warning in
TrackerInitialState.cpp
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24596 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed appearantly unused satic variables. Hope this does not break
binary compatibility, going to test.
* There are three more private methods, which could probably be removed
as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24558 a95241bf-73f2-0310-859d-f6bbb57e9c96
the DefaultDeleter is not the only situation in which the instance might
be deleted, a client app can also call Quit() on the BMediaRoster instance.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24556 a95241bf-73f2-0310-859d-f6bbb57e9c96
file system to not fill newly created space with zeros.
BFile::SetSize() now uses this, while [f]truncate() does not. This
is only a temporary work-around until BFS supports sparse files.
* Apps that want to reserve space to fill up later should use
BFile::SetSize() for now, as this will be a lot faster than
[f]truncate().
* cache_io() and the functions below now use a special mode when you
pass in a NULL buffer: for read access, the cache is only populated
(useful for prefetching), for write access, the file is filled with
zeros.
* Implemented BFS's Inode::FillGapWithZeros() using this method now.
* Removed extraneous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24555 a95241bf-73f2-0310-859d-f6bbb57e9c96
Note: I have cleared the original MessageQueue.cpp file from the inline documentation. When the storage kit comes up, we need to rediscuss the documentation policy.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24522 a95241bf-73f2-0310-859d-f6bbb57e9c96
it just means the port has been deleted while the node was waiting, like
when a program quits.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24502 a95241bf-73f2-0310-859d-f6bbb57e9c96
according to coding style guide.
* Print the error string for read_port_etc() instead of the error code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24501 a95241bf-73f2-0310-859d-f6bbb57e9c96
node was instantiated by an application, therefor it is not an error.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24500 a95241bf-73f2-0310-859d-f6bbb57e9c96
but operates "read-only".
* Added FindKeyFrame() method to ReaderPlugin, see above.
* Reformated ReaderPlugin header. Added const qualifier to Source() method.
* Small cleanups in BMediaTrack::SeekToTime() and SeekToFrame(). Added TODOs
with regards to "seeking" in decoders, wich should IMHO be revised. (Codecs
cannot seek in the stream, they only get fed chunk data. The only thing they
can do is reset themselves in preparation for a discontinuity of the chunk
data...)
* Implemented BMediaTrack::FindKeyframeByXX() methods via the new
MediaExtractor::FindKeyFrame() method.
* Implemented Seek() and FindKeyFrame() methods in the Reader base class,
returning B_NOT_SUPPORTED. I think this makes sense and also I don't have
to adapt all existing Reader plugins for the new FindKeyFrame() call. :-)
* Implemeneted FindKeyFrame() in the avi_reader. The OpenDMLFile class
gets Seek() extended for a "read-only" mode. Currently the implementation
is broken (as before) with regards to keyframes. These were ignored before
and I have not changed them to actually support the seek flags with regards
to keyframes. That's the interesting TODO...
* Some reformatting here and there in avi_reader code, sorry for the mixup.
The only actual change is the support for the read-only flag to Seek().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24495 a95241bf-73f2-0310-859d-f6bbb57e9c96
modules, I left the one from MediaExtractor::CreateDecoder, since it also
mentions the stream index.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24491 a95241bf-73f2-0310-859d-f6bbb57e9c96
check if mouse is over a submenu and then if it's over the current menu.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24479 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed all but one compiler warnings in libmedia.so.
* Truncated lines to 80 char width where I looked at code.
* Turned printf()s into TRACE/ERROR calls in MediaExtractor.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24478 a95241bf-73f2-0310-859d-f6bbb57e9c96
is 0, in which case it is almost save to assume it is a keyframe. Added
TODO though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24474 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Turn off tracing in the Media Kit.
* Notify of unimplemented functions regardless of tracing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24473 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fTrackList was deleted with delete, but needed delete[].
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24472 a95241bf-73f2-0310-859d-f6bbb57e9c96
Invalidate() on SetMaxValue(). This should probably be revisited in
the future whenever we break binary compat. TODO note added to that
effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24468 a95241bf-73f2-0310-859d-f6bbb57e9c96
locked.
* Removed some long and useless comments.
* Other minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24445 a95241bf-73f2-0310-859d-f6bbb57e9c96
readlink() function. It is no longer required to null-terminate the
string, shall not fail, if the buffer is too small, and shall return
the length of the string actually written into the buffer.
* Adjusted rootfs, devfs, and bfs accordingly. Also adjusted their
read_stat() hooks to return the correct symlink length in st_size.
* Our readlink() does now comply to the standard (and BeOS).
Additionally if the buffer is big enough it is nice to non-conforming
apps and null-terminates it.
* BSymLink::ReadLink() explicitly null-terminates the string now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24425 a95241bf-73f2-0310-859d-f6bbb57e9c96
would cause various incorrect behavior, best observed in the form of Deskbar crashing if you tried to drag and drop
a large replicant (i.e. Workspaces) onto it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24418 a95241bf-73f2-0310-859d-f6bbb57e9c96
Tracker now persisting its desktop replicants across sessions.
This may not completely handle zombies properly though, I had
nothing to test that case with.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24409 a95241bf-73f2-0310-859d-f6bbb57e9c96
Move implementation from LocalDevice for retrieving the BluetoothServer Messenger
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24385 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Move Messages id to a private header
* New constructor for RemoteDevice
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24376 a95241bf-73f2-0310-859d-f6bbb57e9c96
Check for memory allocation errors.
Added limit to maximum flavor format count (300).
No longer crashes when out_format_count is invalid for B_BUFFER_CONSUMER,
or in_format_count is invalid for B_BUFFER_PRODUCER.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24366 a95241bf-73f2-0310-859d-f6bbb57e9c96
* _Alloc() can now preserve the original reference count, only _Clone()
still initializes it to 1. As Karsten pointed out, this is necessary to
preserve the "shareable" status of the private data.
* I hope that's finally it. What happened to our testing suite, anyway? :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24355 a95241bf-73f2-0310-859d-f6bbb57e9c96
_ReplaceAtPositions(), and _DoCharacterEscape() (we don't need to preserve
it, though, as it must be 1).
* Factored out an _Alloc() method which is now always called when the private
data is allocated. It also takes care of correct initialization (and thus
fixes the above problem).
* This fix finally allows turning on reference counting again, thanks Karsten!
* Minor cleanup, renamed "oldAdr"/"newAdr" to "oldString", resp. "newString".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24348 a95241bf-73f2-0310-859d-f6bbb57e9c96
* _Realloc(), and _Detach[With]() may fail, but that wasn't accounted for
everywhere.
* The Append(), Prepend(), and Insert() char versions all caused their
backends to access invalid data (must use strncpy() instead of memcpy()
here).
* All Append(), Prepend(), and Insert() BString variants used an invalid
check, and would therefore just do nothing in certain situations like this
one:
BString a = "-";
BString b = a;
a.Append(b);
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24347 a95241bf-73f2-0310-859d-f6bbb57e9c96
copy constructors, effectively turning of references completely.
* Since that caused troubles (NetPositive now crashes when started), I
temporarily disabled references by letting _IsShareable() always return
false until the issue is resolved.
* _FreePrivateData() now sets the fPrivateData member to NULL, and is also
safe to be called when fPrivateData is NULL.
* Removed my comment about the threading problem in _Detach() and _DetachWith()
as that just couldn't happen.
* _Clone() must not use memcpy() as the string pointed to by "data" might not
be as long as "length".
* LockBuffer() now marks a string as unshareable.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24345 a95241bf-73f2-0310-859d-f6bbb57e9c96
cleared which have no app_server link (B_BITMAP_NO_SERVER_LINK).
* Check the allocation of the BWindow in BBitmap for view accepting bitmaps.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24344 a95241bf-73f2-0310-859d-f6bbb57e9c96
truncated, if already existing. This problem could be experienced when
saving in Pe.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24329 a95241bf-73f2-0310-859d-f6bbb57e9c96
the new sematic of transfer_area so a message area is transfered into the right
teams' address space and it does not need to be cloned there anymore. Passing
by area is only used for messages bigger than a certain size (currently
hardcoded to 40KB) which should be somehow bound to the max port message size.
This makes passing large messages (i.e. > the port limit) possible, so for
example copy&paste of long text, image data, etc. should now work.
Got rid of the fClonedArea member as it is not necessary with the new design,
renamed shared_area to message_area in the private message_header, avoid
an unnecessary allocation of the header for the copy constructors, check
allocations in a few more places and some minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24321 a95241bf-73f2-0310-859d-f6bbb57e9c96
string stuff.
* It's still not thread-safe for all usage patterns, though, so we might want
to remove or disable it: if a string is shared between several threads, and
one of those starts to use a reference, all kinds of problems can happen.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24312 a95241bf-73f2-0310-859d-f6bbb57e9c96
Tracked down the root cause of the issue worked around in r24228.
The behavior that was occurring in this case was as follows:
Vision created a BInvoker off the heap, containing a BMessage likewise
off the heap. It then called BAlert::Go with this invoker. When any of
the buttons in the BAlert were pushed, _SendMessage would enqueue the
message into the target looper (in this case, Vision's window) and wake
it up with write_port_etc. However, in some cases this would result in
a reschedule such that Vision's looper executed before _SendMessage() was
able to complete all its processing. Upon receiving this message, Vision
destroyed the BInvoker in question, which in turn deleted its owned
BMessage -- which was the message that was still in the middle of _SendMessage()!.
Consequently it would crash a few lines later when it hit IsSourceWaiting() and
tried to check flags off its header off the already destroyed this. To fix this,
we now do the AddMessage/write_port_etc last before returning. Also removed the
sanity checks added in r24228 so we don't mask other problems of similar nature.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24297 a95241bf-73f2-0310-859d-f6bbb57e9c96
still. This way keyboard menu navigation works much better.
Unfortunately I can't apply the same trick for BMenu since it opens the
submenu with a delay, and that won't work anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24296 a95241bf-73f2-0310-859d-f6bbb57e9c96
would have returned the second item in place of the first. Also return
NULL, not false, when there are no "next items".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24294 a95241bf-73f2-0310-859d-f6bbb57e9c96
MakeFocus(false) can not be trusted, since it is virtual and might not call
the BView version.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24293 a95241bf-73f2-0310-859d-f6bbb57e9c96
B_ASYNCHRONOUS_CONTROLS flag. If anyone does encounter an app that
breaks because of this, please let me know, but a few tests with various
apps seem to show no issues.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24290 a95241bf-73f2-0310-859d-f6bbb57e9c96
set up with a null replyTo, sometimes BMessage would crash
calling IsSourceWaiting() after delivering the message. This appeared
to be because fHeader was NULL, but I'm not entirely certain if this
is actually supposed to be possible, so this may be masking a different
bug. This was observable using the multiline paste spam BAlert in
Vision, which would sometimes but not always crash in Haiku after hitting
any of the buttons to dismiss it, though consistently when calling IsSourceWaiting()
from the private BMessage::_SendMessage().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24228 a95241bf-73f2-0310-859d-f6bbb57e9c96
a BTextView in order to be able to display multiline
panel text (since BStringView can't handle this). However,
while they correctly set the background panel color, they
neglected to set the font style/color to that used by panel.
Fixed. This makes shutdown/restart dialogs properly color sensitive.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24226 a95241bf-73f2-0310-859d-f6bbb57e9c96
- no need to initialize the buffer on stack
- no need to initialize "buffer" to NULL
- renamed "buf" to stackBuffer
- enlarged buffer on stack to 16384 bytes (we have a minimum of 192 kB of
stack per thread, anyway).
- check the actual size of the stack buffer against the message's flattened
size instead of the one of its pointer.
- check if the allocation of the helper buffer failed, and return B_NO_MEMORY
in this case.
* Moved static helper functions to the top of the file.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24204 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Allocate the buffer to flatten the message on the heap, if it's size is bigger then a given
buffer on the stack. It seem's to exceed the stack size (this might count for AddFlat() too).
Note: With this change one is able to copy the text into the clipboard (1mb), but it
is still impossible to paste it somewhere, as in BClipboard::_DownloadFromSystem()
SendMessage() fails transferring the data back in the reply msg because of the port size limit...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24196 a95241bf-73f2-0310-859d-f6bbb57e9c96
correct warning) for AbstractPointerListHelper. (libbe_build.so)
* I have had problems with implementing virtual functions inline in the
class declaration before, so I implemented the virtual destructor
externally.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24168 a95241bf-73f2-0310-859d-f6bbb57e9c96
weird text selection in BTextView() (for example, when an empty line was
part of the selection).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24142 a95241bf-73f2-0310-859d-f6bbb57e9c96
if the items were the same height.
- Modified _RecalcItemTops to allow us to specify a range instead of
just a starting point. This is useful for cases like Swap, where
only the items in between those being swapped need to be
recalculated.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24139 a95241bf-73f2-0310-859d-f6bbb57e9c96
line will be scrolled out of view. (Fixes text jumping one pixel up/down in
Vision with each new char you type into Visions text box.)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24136 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renaming things in Tracker list mode no longer magically grows the text view.
* ScrollToOffset() is not supposed to depend on the existence of any scroll
bars, in R5 text views simply scroll to where they need to. This fixes
renaming things in Tracker when hitting the window bounds (text widget stops
growing and starts to autoscroll) and also the Text tool in WonderBrush.
* _ScrollToOffset() is therefor no longer needed.
* The insets of the text rect are not so interesting as the original width.
In auto resizing mode, the original width is important when there is no
container view. In this setup, the text rect auto resizing is mainly needed
for auto scrolling, but it should never shrink below the original size.
* Further improved auto scrolling for right aligned and center aligned text
views, it works like R5 now. Also take the line height into account when
checking for the bounds bottom. Removed extra spacing for vertical
scrolling.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24130 a95241bf-73f2-0310-859d-f6bbb57e9c96
NodeMonitor.h.
* The latter will be set in "statFields" for interim updates when you have
asked to get them via the former.
* BFS now uses the B_STAT_INTERIM_UPDATE flag for sending updates to actively
written files.
* This makes us more compatible with BeOS again; if you only asked for
B_WATCH_STAT, you will now only receive a notification if the file in
question has been closed.
* Tracker now uses B_WATCH_INTERIM_STAT to always get all updates (ie.
downloading a file will update its size and modification time in Tracker
periodically during the download).
* Wether "needsTrimming" was true or not has no influence on wether or not
the size index needs to be updated in BFS - only the actual file size is
stored there, not the on-disk size.
* Added a TODO comment in Inode::WriteAt() that it would actually need to
update the size index when changing the file size, not when the file has
been closed (but that's probably too slow).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24114 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Placed _BTextInput_ into BPrivate namespace.
* Made _BTextInput_::AlignTextRect() smarter, it centers the line vertically,
for the case that the BTextControl has a larger label font. Improved insets
for asthetics.
* Used _BTextInput_::AlignTextRect() consistently in BTextControl, no more
custom calls to SetTextRect(). Account for minimum vertical inset of 2
pixels in GetPreferredSize().
* Consistendly select all text when gaining focus in _BTextInput_.
* Override MouseDown() in case the control did not have focus before, or else
BTextView::MouseDown() will deselct the text again and place the cursor.
(in line with BeOS behavior)
* Removed unused fBool member from _BTextInput_ and other cleanup.
BTextView:
* Reimplemented BTextView::_AutoResize() so that it works well with
BTextControl and autoscrolling when the alignment is not B_ALIGN_LEFT.
I needed two new members for this, fLeftInset and fRightInset which are
the original insets from the fTextRects. It might currently be broken
for renaming things in Tracker, I will have to check. _AutoResize() no
longer messes up the fTextRect insets.
* Fixed stray carrets sometimes being left over, mostly when auto scrolling,
but I observed them in other cases as well.
* Prevent negative scrolling offsets when autoscrolling. Fixes weird scrolling
offsets when navigating to the left.
* Reset scrolling to B_ORIGIN when SetText() is called. Fixes for example
starting to type in the middle of the control in Vision when entering new
text and autoscrolling was triggered before.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24101 a95241bf-73f2-0310-859d-f6bbb57e9c96
with other controls. (BTextControl patch with the same change is upcomming, but
it includes many other changes I didn't want to mix in.)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24100 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BListItems now store the top offset of the frame within the parent BListView.
* This allows binary searching the clicked item.
* ItemFrame() is now a cheap call.
* Fixed several bugs in the sorting code of BOutlineListView which lead to
crashes of client applications.
* Implemented previously unimplemented functions in BOutlineListView.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24092 a95241bf-73f2-0310-859d-f6bbb57e9c96
correctly in some cases inside HashEscapements(). Also, when looking for
a value in the hash, we checked the same position twice in some
cases (did not cause any problem, was just a bit slower).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24079 a95241bf-73f2-0310-859d-f6bbb57e9c96
inside menus: first sub, then current, then super. It's more logical,
and handles every case (hopefully I've tested every possible
combination) of overlapping menus correctly.
Fixes bug #1821.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24044 a95241bf-73f2-0310-859d-f6bbb57e9c96
want to mix too much cleanups into real changes.
* Got rid of the weird lines between rows.
* Tweaked colors (selections are usually dark everywhere else in Haiku).
* Implemented slightly tinting alternating rows.
* Removed the code duplication to figure out the appropriate background
row color, fixed some inconsistencies between Draw() and RedrawColumn()
in this regard.
TODO: Default colors should be computed based on current panel color though.
TODO: Figure out why the outline view does not scroll (at least not visibly)
when the vertical scroll bar is used.
TODO: Remove remaining redraw bugs. I observe a column of pixels not being
updated in some cases when resizing columns.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24033 a95241bf-73f2-0310-859d-f6bbb57e9c96
alpha mode. Thanks to Ralf Schuelke for pointing this out.
* Also check the bitmap color space and only use alpha drawing for bitmaps
with valid alpha channel.
* Don't just reset the parent to B_OP_OVER, but use the previous mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24031 a95241bf-73f2-0310-859d-f6bbb57e9c96
it is already implemented they way I thought it could be done - nice! Just
some simplifications.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24027 a95241bf-73f2-0310-859d-f6bbb57e9c96
fixes indicating the focus of the resized column if it isn't the first one.
* Code cleanups by myself in the archiving implementation. No functional change.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24026 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Default data is defined in two places, and was inconsistent.
- Color comparisons could be done with the wrong alpha. note: BColorControl's behavior wrt alpha might differ from R5's.
This fixes part of #254
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24008 a95241bf-73f2-0310-859d-f6bbb57e9c96
clicked (with the menu opened) on a view which uses GetMouse() in a loop
(PE, tracker), since it stealed the mousedown message.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24005 a95241bf-73f2-0310-859d-f6bbb57e9c96
another thread (for example, when quitting the app/window), and that
would cause a deadlock. Fixes bug #1645.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23995 a95241bf-73f2-0310-859d-f6bbb57e9c96
the BDiskDevice of a BPartiton has not been prepared for modifications. To
me, it means the initialization status of the object does not support the
operation, hence B_NO_INIT. B_BAD_DATA hints to me that I have passed invalid
data to a function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23875 a95241bf-73f2-0310-859d-f6bbb57e9c96
use a cached value otherwise. Should speed up icon placement when Tracker
starts.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23871 a95241bf-73f2-0310-859d-f6bbb57e9c96
* If in B_WIDTH_AS_USUAL mode, the strings in the tabs are nevertheless
truncated to the available width.
* Pass the real area available for the string to BTab::DrawLabel(), resolved
TODO in DrawLabel() about not having to calculate an offset to account
for the slope.
* Fixed some too lines of code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23869 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The BMediaTheme now uses B_WIDTH_FROM_LABEL for tabs in tabviews,
this makes tabs as wide as they need to be.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23868 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BTimeSource now checks if it is about to add itself as a slave node
and refuses to.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23867 a95241bf-73f2-0310-859d-f6bbb57e9c96
BMessenger::SendMessage(), which could lead to deadlocks (as in bug
#1745).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23865 a95241bf-73f2-0310-859d-f6bbb57e9c96
for finding this. This should fix bug #1734.
* Removed unused BWindow members and the temporary PrintToStream() method.
* Indentation cleanup (DirectWindow.h had some spaces instead of tabs).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23863 a95241bf-73f2-0310-859d-f6bbb57e9c96
file position in case an offset was specified.
* Reverted r23828-r23830 in File.cpp: don't fix the symptoms but the cause
of the problem (hey, that has to be in the kernel, right? :))
* Cleanup of File.cpp, removed OpenBeOS namespace.
* Moved user_fd_kernel_ioctl() to the section where it belongs to (that
function should be renamed, though).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23832 a95241bf-73f2-0310-859d-f6bbb57e9c96
ReadAt() and Read() with regards to the file position. Ie, WriteAt()
is not supposed to modify the data pointer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23830 a95241bf-73f2-0310-859d-f6bbb57e9c96
position before calling _kern_read() and reset it afterwards.
*NOW* this fixes bug #1200 in all cases.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23829 a95241bf-73f2-0310-859d-f6bbb57e9c96
missing attributes).
I hope nothing relies on the previously broken behaviour.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23828 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added optional tracing for the main operations
* fixed bad pointer arithmetic when reallocating/moving the object's data
* it was impossible to remove the very first space via _RemoveSpaces()
* added a little more variaty to error return codes for some
functions to make them a little more helpful
-> This fixes the bogus space values in DriveSetup (#1737)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23824 a95241bf-73f2-0310-859d-f6bbb57e9c96
destination of the message and it's "what" field are stored. It might be
nice to also get some info about its fields -- maybe as an additional
option.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23810 a95241bf-73f2-0310-859d-f6bbb57e9c96
compiling a regex. Note this is probably a bug in how MDR uses regex and not in
the regex implementation itself. This is just the simple fix while I
investigate bug #1200.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23792 a95241bf-73f2-0310-859d-f6bbb57e9c96
selection (for example, moving around text with the mouse).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23789 a95241bf-73f2-0310-859d-f6bbb57e9c96
(I guess frenchies are guilty here, as mmu_man's ThemeAddOn have the same disease...)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23757 a95241bf-73f2-0310-859d-f6bbb57e9c96
DirectConnected() could be called twice with B_DIRECT_STOP when closing
the BDirectWindow.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23718 a95241bf-73f2-0310-859d-f6bbb57e9c96
when the view is detached, fRenderer has already been released, and wouldn't
unlock the looper anymore in GLTeapot. This fixes bug #1626.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23691 a95241bf-73f2-0310-859d-f6bbb57e9c96
already using.
* We don't have to try posting _QUIT_ more than once, as it cannot block; the
looper is local, so direct message passing is used in this case.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23690 a95241bf-73f2-0310-859d-f6bbb57e9c96
volumes root directory when trying to unmount it. This fixes bug #1694.
Thanks to Ingo for investigating this! :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23685 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Changed Backgrounds preflet to account for the fixes in BColorControl
First commit :) Hi everybody!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23680 a95241bf-73f2-0310-859d-f6bbb57e9c96
Implemented palette mode and fixed bugs listed at ticket #1701. Thanks
for your work!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23671 a95241bf-73f2-0310-859d-f6bbb57e9c96
keydown. Fixed SetMaxBytes() so that it respect multibyte characters
(it removes the whole character in case it doesn't fit).
This can be seen in BColorControls, where you can't write numbers with
more than 3 characters anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23605 a95241bf-73f2-0310-859d-f6bbb57e9c96
(suggested by stippi). The movement threshold will be subject to
changes, as I only tested on vmware and it's probably too high.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23528 a95241bf-73f2-0310-859d-f6bbb57e9c96
mix up the resizingMode and flags field in the BView constructor. This does
not cause problems under BeOS but was causing wrong follow modes when those
applications were run under Haiku. In case such an application is detetected
a corresponding warning is printed out. Also added a comment explaining the
rational behind the change and a ToDo for the later cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23424 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Move most of MIME database support out of libbe and into registrar
* Use the (async) MessageDeliverer instead of a synchronous SendMessage in _SendMonitorUpdate
This fixes a deadlock when the message port of a MIME database watching
application gets full as documented in bug #1311.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23423 a95241bf-73f2-0310-859d-f6bbb57e9c96
which already existed in the region backend ported from XOrg
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23394 a95241bf-73f2-0310-859d-f6bbb57e9c96
That way menubars are navigable via keyboard. There are still glitches,
but menu keyboard navigation works now.
Minor optimization: cache the value of CountItems() instead of calling
it multiple times.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23387 a95241bf-73f2-0310-859d-f6bbb57e9c96
couldn't be read from a file, Tracker would try 10 times with a 10 ms
timeout - but only if the creation time equals the modification time!
That was obviously supposed to be a check if the file was recent...
Now that computers are faster (even when running Haiku), it may
actually take less than one second to copy a file, so most files on
the Haiku image satisfied this thoughtful and future-proof check.
(And no, even the original BFS does not automatically increase the
modified time on close.)
* Now, mmlr came up with a better check: we just check the file's
creation time against the current time to see if it's a recent file.
That should work a bit more reliable :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23376 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes the bug described by Stefano in r23343.
* Therefore, I enabled cached menu windows again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23356 a95241bf-73f2-0310-859d-f6bbb57e9c96
review.
Added a compile time option to switch off the use of the cached menu
windows. Looks like there is a problem with the focus system, if I keep
the cached menu window around, it "steals" keyboard events from the main
app window after the menu has been opened and closed once.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23343 a95241bf-73f2-0310-859d-f6bbb57e9c96
Christof Lutteroth, which improve menu keyboard navigation. Sorry for
the delay, I had these patches sitting on my hard drive for a while. At
least now you can open a menu with ALT + ESC, navigate it with the arrow keys,
and invoke an item.
Various issues still exist, including: menubars don't get the keydown
messages, and if you keep the mouse over the menu while navigating
with the keyboard, nothing will happen.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23339 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fixes the content inside the tabview in the Media preflet spanning over
the wrong area (wrong insets)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23338 a95241bf-73f2-0310-859d-f6bbb57e9c96
non-traight lines extending past the thumb frame because of anti-aliasing
effects
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23286 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add support for B_HOME and B_END key (jump to min/max value)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23285 a95241bf-73f2-0310-859d-f6bbb57e9c96
- in the code path, now it's clear if the looper is locked or not
- if menus are quitting, now we don't call snooze() anymore, and avoid
the extra GetMouse() call.
- some other cleanups
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23279 a95241bf-73f2-0310-859d-f6bbb57e9c96
Moved GetMouse() calls near the check for exit conditions.
Reorganized a bit the code, and hopefully simplified it in some places.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23229 a95241bf-73f2-0310-859d-f6bbb57e9c96
_LoadDefaultSettings() if no settings were loaded already, in order to
return valid values. Renamed private methods to fit our guidelines.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23204 a95241bf-73f2-0310-859d-f6bbb57e9c96
into its own archive (libcolumnlistview.a). Only DriveSetup is using it at the
moment, anyway.
IMO we should reimplement and completely redesign a class with this
functionality before considering making it public.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23198 a95241bf-73f2-0310-859d-f6bbb57e9c96
activation messages, and always retrieves the information from the latest.
* Reverted r23062, as the above should fix bug #613 as well.
* This should also fix bug #1674.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23196 a95241bf-73f2-0310-859d-f6bbb57e9c96
BShelf::_AddReplicant(). Now it's called near the end of the function.
This way we don't have to call RemoveSelf() in case
BShelf::CanAcceptReplicantView() return false. This also fixes a glitch
in BSnow, which calls MoveTo() in AttachedToWindow(). Simplified the
code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23185 a95241bf-73f2-0310-859d-f6bbb57e9c96
