* The user of an editor needed knowledge about the editor in order to make
use of it.
* Furthermore, the BPartitionParameterEditor exposed type specific
functionality that it shouldn't know anything about, either.
* We may now define a number of known parameters per editor type; right now
there is only "type" as it's needed by DriveSetup.
* Adapted all disk systems, and DriveSetup to the new API.
* Renamed CreateParamsPanel, and InitializeParamsPanel to *ParametersPanel
in DriveSetup.
* They now share a common base class AbstractParametersPanel.
* edid1_detailed_timing_raw was missing
a field which threw off the sync bits.
* The result was the monitor will receive
a different sync polarity than it requested.
Most monitors handle this, but it is still
a bug
* Added the aforementioned functions.
* create_area_etc() now takes a guard size parameter.
* The thread_info::stack_base/end range now refers to the usable range
only.
* use only a single static object (MutableLocaleRoster) instead of
two, which avoids any problems if the order of static object
destruction would destroy RosterData before MutableLocaleRoster
* rename BPrivate::RosterData to BPrivate::LocaleRosterData and move
it into a header and implementation file of its own
This should hopefully fix problems encountered with a clang-compiled
Locale Kit.
Since we're using multi-part uImage format, we can add the FDT as
a seperate "blob" in the uImage, if the used U-Boot version is not
"FDT enabled".
This is used for example for our Verdex target. Currently I've got
a local hack in the platform/u-boot/Jamfile, looking into pulling
in the FDT files and a proper Jam setup to do that properly...
This detects everything up to ARMv6 right now. Need to check more
recent ARM ARMs for ARMv7 detection.
The detected details get passed on to the kernel, which can use
the pre-detected info for selecting right pagetable format and such.
Copyright removal of Axel done after agreement with Axel @ BeGeistert
that for files that were copy/pasted from x86 arch and then fully
replaced the implementation, removal of original copyright holder is
allowed, since their actual code is gone ;)
Pass the BHandler object that opened the about window to BAboutWindow.
When the window closes, send a kAboutWindowClosed message back to the
handler. This allows the handler to set the variable to NULL.
Implement the new about dialog constructor in all apps that use it.
Remove the old constructor. This now works reliably for all cases I
tested without crashing and does the right thing on close. The setup
and teardown is a bit more complicated than I wanted though.
Unfortunately this seems to be necessary when not using a BAlert.
Fetching the app icon does not work reliably yet. This is because for
replicants the app may not be running. I may have to pass the icon in
instead of grabbing it from the signature.
* Grabs the app icon and version from the resource file.
* Allow you to specify the copyright holder instead of hardcoding
"Haiku, Inc."
* Support multiple extra copyright fields.
* Modify BAlert to take a custom icon.
* Set the custom icon of the BAlert to the app icon.
* Also set the app version.
* Convert BAboutWindow to derive from BWindow
* Place a 128x128 icon and fill out a scrolling BTextView
with options such as authors, version history, copyright,
license, etc. Still needs some work but is coming along.
* Add the word Version to the version line, i8n'ed of course,
and tweak the info box and default sizes.
This is to make sure all ARM platforms will benefit from planned work on this
MMU/CPU code. The less code duplicated, the better.
Compile-tested for all supported ARM platforms
This also implements the fault handler correctly now, and cleans up the
exception handling. Seems a lot more stable now, no unexpected panics or
faults happening anymore.
* The only implementation that would accept more than 2 TB was the one in
scsi_disk. But even that one was limited to 63 TB.
* Now there is a new utility function devfs_compute_geometry_size() which
does it correctly for sizes up to 2^64 which should be good enough for
quite some time :-)
* This fixes bug #8992.
* For now let's include the same fields in platform_kernel_args
than in the OF version.
* This allows linking the kernel.
Later on we should allow supporting more than a single boot platform,
to have a single kernel per arch.
* When we do not have a predefined model string, we now try to parse
the reported model string into something that is at least usable,
and should look comparable to what we have now.
* For models where the parsed type string is acceptable, we could remove
the predefined ones.
- BNavMenu now keeps its own copy of the cached types list that's passed to it.
In some circumstances it could happen that the container window would
delete the list and consequently the nav menu would wind up with a pointer
to an invalid object. Probably a regression from the async mouse tracking
rewrites.
The lowest 4 bits of the MSR serves as a hint to the hardware to
favor performance or energy saving. 0 means a hint preference for
highest performance while 15 corresponds to the maximum energy
savings. A value of 7 translates into a hint to balance performance
with energy savings.
The default reset value of the MSR is 0. If BIOS doesn't intialize
the MSR, the hardware will run in performance state. This patch
initialize the MSR with value of 7 for balance between performance
and energy savings
Signed-off-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Renamed {32,64}/int.cpp to {32,64}/descriptors.cpp, which now contain
functions for GDT and TSS setup that were previously in arch_cpu.cpp,
as well as the IDT setup code. These get called from the init functions
in arch_cpu.cpp, rather than having a bunch of ifdef'd chunks of code
for 32/64.
* made private Catalog.h header public by moving it to
os/locale/tools/CollectingCatalog.h
* reintroduce B_COLLECTING_CATKEYS define (which is expected to be set
during a collectcatkeys session) in order to decide whether or not
to automatically include the CollecingCatalog.h header from Catalog.h
* adjust jam rule for collecting catalog keys accordingly
This also matches the client_window_info.show_hide_level field used in Deskbar
and other applications.
While doing this, keep fShowLevel fully in sync between BWindow and app_server,
use one message type for both hiding and showing, and make the decision to show
and hide the window in the app_server.
Lastly make minimize behave as described in the Be Book: hidden windows cannot
be minimized, and minimized windows which get hidden become unminimized.
* Various compilation fixes.
* Fixes to the FreeBSD compatibility layer (from comparing the x86-
specific bits with the equivalent amd64 sources in FreeBSD).
* Compile all the Ethernet drivers except for sis900 and wb840, these
require a bit more work to fix (will file a ticket soon). Tested
ipro1000 and rtl81xx, no issues.
Reused x86 arch_user_debugger.cpp, with a few minor changes to make
the code work for both 32 and 64 bit. Something isn't quite working
right, if a breakpoint is hit the kernel will hang. Other than that
everything appears to work correctly.
* Remove non-generic radeon dp_get_lane_count
* Set lane count and link rate at set_display_mode
* Pass entire mode to pll_set vs only pixel clock for DP code
* Add helpers for DP config data to common code
* Obtain more correct link rate
No functional change.
* Surround email addresses in angle brackets.
* Add myself to ExpressionParser.cpp and .h
* Remove myself from ExpressionTextView.cpp and .h
* Alphatetize authors by last name.
Thanks Ingo and Axel.
* Changed IS_USER_ADDRESS to check an address using USER_BASE and
USER_SIZE, rather than just !IS_KERNEL_ADDRESS. The old check would
allow user buffers to point into the physical memory map area.
* Added an unmapped hole at the end of the bottom half of the address
space which catches buffers that cross into the uncanonical address
region. This also removes the need to check for uncanonical return
addresses in the syscall handler, it is no longer possible for the
return address to be uncanonical under normal circumstances. All
cases in which the return address might be changed by the kernel
are still handled via the IRET path.
* This puts the registers in a better state and ensures
all model dependant defines are prefixed with card series
* Consolidate evergreen defines into single header
Default is radian mode, You set the option in the right click menu
like the other options.
Note: degree mode does not affect hyperbolic trigonometric functions.
This is how Mac Calculator, Windows Calculator, and Google Calculator
work.
The cookie is used to store the base address of the area that was just
visited. On 64-bit systems, int32 is not sufficient. Therefore, changed
to ssize_t which retains compatibility on x86 while expanding to a
sufficient size on x86_64.
Userland switch is implemented, as is basic system call support (using
SYSCALL/SYSRET). The system call handler is not yet complete: it doesn't
handle more than 6 arguments, and does not perform all the necessary kernel
entry/exit work (neither does the interrupt handler). However, this is
sufficient for runtime_loader to start and print some debug output.
Since the commpage is at a kernel address, changed 64-bit paging code
to match x86's behaviour of allowing user-accessible mappings to be
created in the kernel portion of the address space. This is also
required by some drivers.
Since this argument may be used to pass pointers, uint32 is not
correct for 64-bit. Effectively no change on 32-bit targets, both
size_t and uint32 are unsigned long there.
- Store whether or not the use of the horizontal scrollbar is desired
on the class itself. If the CLV was set to use the horizontal scrollbar,
and then asked to lay itself out while hidden, it would incorrectly assume
the horizontal scrollbar wasn't in use, and consequently repositioned its
views such that the horizontal scrollbar and outline view overlapped.
No major changes to the kernel: just compiled in arch_smp.cpp and fixed the
IDT load in arch_cpu_init_percpu to use the correct limit for x86_64 (uses
sizeof(interrupt_descriptor)). In the boot loader, changed smp_boot_other_cpus
to construct a temporary GDT and get the page directory address from CR3, as
what's in kernel_args will be 64-bit stuff and will not work to switch the
CPUs into 32-bit mode in the trampoline code. Refactored 64-bit kernel entry
code to not use the stack after disabling paging, as the secondary CPUs are
given a 32-bit virtual stack address by the SMP trampoline code which will
no longer work.
A proper page fault handler was required for areas that were not locked
into the kernel address space. This enables the boot process to get
up to the point of trying to find the boot volume.
* Thread creation and switching is working fine, however threads do not yet
get interrupted because I've not implemented hardware interrupt handling
yet (I'll do that next).
* I've made some changes to struct iframe: I've removed the e/r prefixes
from the member names for both 32/64, so now they're just named ip, ax,
bp, etc. This makes it easier to write code that works with both 32/64
without having to deal with different iframe member names.
This has been done by adding typedefs in elf_common.h to the correct ELF
structures for the architecture, and changing all Elf32_* uses to those
types. I don't know whether image loading works as I cannot test it yet,
there may be some 64-bit safety issues around. However, symbol lookup for
the kernel is working correctly.
* Uses 64-bit multiplication, special handling for CPUs clocked < 1 GHz
in system_time_nsecs() not required like on x86.
* Tested against a straight conversion of the x86 version, noticably
faster with a large number of system_time() calls.
* Added empty source files for all the 64-bit paging method code, and a
stub implementation of X86PagingMethod64Bit.
* arch_vm_translation_map.cpp has been modified to use X86PagingMethod64Bit
on x86_64.
* Some things are currently ifndef'd out completely for x86_64 because
they aren't implemented, there's a few other ifdef's to handle x86_64
differences but most of the code works unchanged.
* Renamed some i386_* functions to x86_*.
* Added a temporary method for setting the current thread on x86_64
(a global variable, not SMP safe). This will be changed to be done
via the GS segment but I've not implemented that yet.
For now I've just put all the stub functions that are needed to link the
kernel into a file called stubs.cpp. I've not yet moved across the interrupt
handling code or the ELF64 relocation code to the x86 directory. Once those
have been moved I can get rid of the x86_64 headers/source directories.
Not many changes seeing as there's not much x86_64 stuff done yet. Small
differences are handled with ifdefs, large differences (descriptors.h,
struct iframe) have separate headers under arch/x86/32 and arch/x86/64.
The setup procedure is fairly simple: create a 64-bit GDT and 64-bit page
tables that include all kernel mappings from the 32-bit address space, but at
the correct 64-bit address, then go through kernel_args and changes all virtual
addresses to 64-bit addresses, and finally switch to long mode and jump to the
kernel.
Introduce a function to generate the string representation of a bitrate
(kbps, mbps, gbps, etc..)
* Factor out the code from MediaPlayer InfoWindow
* Allow different bases (/1000 or /1024)
* platform_allocate_elf_region() is removed, it is implemented in platform-
independent code now (ELF*Class::AllocateRegion). For ELF64 it is now
assumed that 64-bit addresses are mapped in the loader's 32-bit address space
as (address - KERNEL_BASE_64BIT + KERNEL_BASE).
* mapped_delta field from preloaded_*_image removed, now handled compile-time
using the ELF*Class::Map method.
* Also link the kernel with -z max-page-size=0x1000, removes the need for
2MB alignment on the data segment (not going to map the kernel with large
pages for the time being).
The ELF loader now uses a new platform function, platform_allocate_elf_region,
which returns 2 addresses: the real load address and an address where the
region is mapped in the loader's address space. All of the ELF loading code
has been changed to access the load region through the mapped address rather
than the addresses contained in the ELF image. The ELF64 version of
platform_allocate_elf_region on x86 uses the existing MMU code, which maps
everything at 0x80000000, but returns the correct 64-bit address. The long
mode switch code will just set up the 64-bit address space with everything
remapped at the correct address.
* FixedWidthPointer:
- operators ==/!=: Change second operand type from void* to const
Type*. Also add non-const version to resolve ambiguity warning when
comparing with non-const pointer.
- Add Pointer() getter.
- Remove templatized cast operators. They are nice for casting the
pointer directly to another pointer type, but result in ambiguity.
* Make preloaded_image::debug_string_table non-const. Avoids clashes of
the const and non-coast FixedWidthPointer comparison operators. A
cleaner (but more verbose) solution would be to spezialize
FixedWidthPointer for const types.
The actual implementation of the ELF loading methods have been put into
an ELFLoader template class that takes a single template parameter, which
is a structure containing all the necessary ELF typedefs. It's a bit
verbose, but I thought it was a neater solution than using a bunch of
standalone functions with a huge number of template parameters. There is
no change to code outside of elf.cpp, the ELF32/ELF64 differences are
handled internally.
* There is now 2 structures, preloaded_elf32_image and preloaded_elf64_image,
which both inherit from preloaded_image.
* For now I've just hardcoded in use of preloaded_elf32_image, but the
bootloader ELF code will shortly be converted to use templates which use
the appropriate structure. The kernel will be changed later when I add
ELF64 support to it.
* All kernel_args data is now compatible between 32-bit and 64-bit kernels.
* Added a FixedWidthPointer template class which uses 64-bit storage to hold
a pointer. This is used in place of raw pointers in kernel_args.
* Added __attribute__((packed)) to kernel_args and all structures contained
within it. This is necessary due to different alignment behaviour for
32-bit and 64-bit compilation with GCC.
* With these changes, kernel_args will now come out the same size for both
the x86_64 kernel and the loader, excluding the preloaded_image structure
which has not yet been changed.
* Tested both an x86 GCC2 and GCC4 build, no problems caused by these changes.
I've tested this change on x86, causing no issues. I've checked over the code
for all other platforms and made the necessary changes and to the best of my
knowledge they should also still work, but I haven't actually built and
tested them. Once I've completed the kernel_args changes the other platforms
will need testing.
Pointers in kernel_args are going to be changed to unconditionally use 64-bit
storage (to make kernel_args compatible with both the x86 and x86_64 kernels).
KMessage stores a pointer to its buffer, however since KMessage is used
outside of the boot code it is undesirable to change it to use 64-bit storage
for the pointer as it may add additional overhead on 32-bit builds. Therefore,
only store the buffer address and size and then construct a KMessage from
those in the kernel.
The whole kernel now builds and there are no undefined references when
linking, I just need to fix some strange relocation errors I'm getting
(probably a problem with the linker script) and then I'll have a kernel
image.
Since ICI arguments are used to send addresses in some places, uint32 is
not sufficient on x86_64. addr_t still refers to the same type as uint32
(unsigned long) on other platforms, so this change only really affects
x86_64.
* x86_64 is using the existing *_ia32 boot platforms.
* Special flags are required when compiling the loader to get GCC to compile
32-bit code. This adds a new set of rules for compiling boot code rather
than using the kernel rules, which compile using the necessary flags.
* Some x86_64 private headers have been stubbed by #include'ing the x86
versions. These will be replaced later.
* gPeripheralBase keeps track of the device
peripherals before and after mmu_init
* Add ability to disable mmu for troubleshooting
* Remove static FB_BASE, we actually don't know
where the FB is yet. (depends on firmware used)
* BCM2708 defines no longer assume 0x20 address
We will be throwing away the blob memory mapping
and using our own.
* Use existing blob mapping to turn GPIO led on pre mmu_init
* Remap MMU hardware addresses from 0x7E. We could map each device,
however the kernel will throw away the mappings again anyway. For
now we just map the whole range and use offsets.
* Serial uart no longer works, however at least
we know why now :). Serial driver now needs to
use mapped address.
* Use U-Boot mmu code as base
* This will be factored out someday into common arch mmu
code when we can read Flattened Device Trees
* Move mmu_init after serial_init.
Temporary change as we will want serial_init to use
memory mapped addresses... for debugging.
* introduce a DebugUART baseclass,
* rework 8250 and PL011 implementations from kallisti5 to inherit DebutUART,
* each arch should override the IO methods to access registers.
* on ARM registers are 32bit-aligned.
* U-Boot still works for the verdex target.
* rPi still compiles, needs testing.
* Still some more consolidation needed to allow runtime choice of the UART type (as read from FDT blobs for ex.).
* serial.cpp should probably mostly be made generic as well.
* didn't touch x86 or ppc yet.
* Enable/Disable makes more sense and matches
platform loader serial functions.
* Rework PL011 code after finding a PDF covering
the details of it.
* Rename UART global defines in loader to be more
exact about location
* This makes things a little more flexible and
the interface to use the uarts cleaner.
* May want to make a generic Uart wrapper
class in uart.h / uart.cpp and call drivers
as needed from there.
* Avoid name collisions
* This uart stuff may work better as a class at
some point, however I didn't want to rock the
u-boot boat *too* much as I don't have the
hardware to test.
* Add nested function wrappers to allow usage of other
uart drivers depending on board. We may want to use this
on other platforms at some point (haha, maybe)
* Make Kernel ARM UART slightly more generic
through (BOARD_UART_CLOCK) configured per board
* Add initial Raspberry Pi serial code
* Still rough and non-working
* Change ShowTip() point parameter name to where.
* Add a parameterless ResetWindowFrame() overload that get's the current
where and calls ResetWindowFrame(BPoint where) which does the actual
work. FrameResized() calls this parameterless ResetWindowFrame()
method instead of doing the work in that method. This is functionaly
the same but allows me to call the parameterless ResetWindowFrame()
elsewhere.
* The areas allocated for BBitmaps were never deleted, even though the
app_server deleted its part when the memory got freed.
* This resulted in a constant memory increase if the application in question
would operate on many changing large bitmaps, like photos.
* Since the bitmaps are reference counted, we don't actually know when to delete
the areas, so that the app_server now notifies the client whenever that is
possible.
* This might fix#6824.
* This removes the fVisibleToolTip member from BView, and fixes bug #5669;
BToolTipManager::ShowTip() now gets the owner of the tool tip as an extra
parameter.
* Removed the work-around to hide that bug.
* Improved ToolTipTest application to include more test cases like a view that
periodically update its tool tip via SetToolTip(const char*), and one that
sets a new tool tip every second.
* Furthermore, added a test that shows that inner views inherit the tool tip
of their parents.
* Fixed another bug in BToolTipManager::ShowTip() that would release an
extra reference to the tool tip currently shown.
* First steps at getting card command processor wired
up to the ring buffers.
* Code doesn't run yet as I have *no* idea what happens
when these rings are in an invalid state.
* rename B_TRANSLATE_CONTEXT to B_TRANSLATION_CONTEXT and
B_TRANSLATE_WITH_CONTEXT to B_TRANSLATE_CONTEXT, squashing a TODO
* adjust all uses of both macros in Haiku's source tree
* use correct header guard for collecting/Catalog.h
The renamed macros require adjustments to all external applications
using catalogs.
* move versions of the B_TRANSLATE_...-macros used during collecting
of catalog keys to a specific header file, which will only be picked
up when running collectcatkeys
* fix a couple of build problems during the preprocessing of the libbe-
sources when extracting catalog keys, all due to private headers not
being found
* move ZombieReplicantView.h from kits/interface to
headers/private/interface, as this way it can be picked up when
building the libbe catalog
* rename BCatalogAddOn to BCatalogData, since it doesn't represent an
add-on, but rather the catalog data provided by an add-on
* move BCatalogData out of Catalog.{h,cpp} into its own header and
implementation file
* drop BCatalogData::MarkForTranslation() methods, they're not needed
* drop BCatalog::GetNoAutoCollectString() methods, they're not being
used anywhere
* cleanup the B_TRANSLATE_... macros somewhat
* add versions of the B_TRANSLATE_MARK_... macros that are meant to be
used in void context (when the string isn't being used by the program,
just meant to be picked up by collectcatkeys).
* adjust several apps to use B_TRANSLATE_MARK_..._VOID where needed
* adjust users of BCatalogAddOn accordingly
* it's bad practice to do a 'using <namespace>' in a header, as that
is very likely to have unintended effects, so drop those from a couple
of private Locale headers
* adjust files all over the locale kit in order to fix the problems
(by explicitly importing the required classes in the implementation
files)
* move EditableCatalog to its own header and implementation file
* move problematic BCatalog::CatalogAddOn() to EditableCatalog
* adjust Locale tools accordingly
AMD C1E is a BIOS controlled C3 state. Certain processors families
may cut off TSC and the lapic timer when it is in a deep C state,
including C1E state, thus the cpu can't be waken up and system will hang.
This patch firstly adds the support of idle selection during boot. Then
it implements amdc1e_noarat_idle() routine which checks the MSR which
contains the C1eOnCmpHalt (bit 28) and SmiOnCmpHalt (bit 27) before
executing the halt instruction, then clear them once set.
However intel C1E doesn't has such problem. AMD C1E is a BIOS controlled
C3 state. The difference between C1E and C3 is that transition into C1E
is not initiated by the operating system. System will enter C1E state
automatically when both cores enters C1 state. As for intel C1E, it
means "reduce CPU voltage before entering corresponding Cx-state".
This patch may fix#8111, #3999, #7562, #7940 and #8060
Copied from the description of #3999:
>but for some reason I hit the power button instead of the reset one. And
>the boot continued!!
The reason is CPUs are waken up once power button is hit.
Signed-off-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
* make the system catalog a BCatalog instead of a BCatalogAddOn*,
such that using a non-existing system catalog won't crash but
simply return the untranslated string instead
* rename MutableLocaleRoster::GetSystemCatalog() to LoadSystemCatalog()
and adjust it to use BCatalog::SetTo() in order to replace the
data used by the given catalog
* adjust all users of gSystemCatalog accordingly
* General DisplayPort functions in common dp.cpp
* DP port information struct in common header
* Please don't use this private accelerant common DP
code just yet as it is very early.
* If dladdr can't find an exact match, it returns the nearest symbol
less than the given address.
* If no suitable symbol can be found, but the address is within a
loaded library, dladdr returns the library name and base address.
Signed-off-by: Ingo Weinhold <ingo_weinhold@gmx.de>
* Make the locale kit a part of libbe.
* Drop the LocaleBackend kludge used from within libbe (and from
other places, too) in order to access system catalog strings.
This is now done via gSystemCatalog, which is provided and initialized
by libbe.
* Drop all references to liblocale.so from all Jamfiles.
* Add legacy symlink liblocale.so in order to keep optional packages
that rely on it in a working state.
TODO: the documentation hasn't been updated.
* The AtomBIOS timeout fix has made my DP bridge
stop working
* The current DisplayPort code is a little lacking
on DP link training... I think thats the cause.
* This puts the first steps towards DP training
in place.
* I plan on trying to make some of this DP stuff
common accelerant stuff after it works.
* Prepend x86_ to non-static x86 code
* Add x86_init_fpu function to kernel header
* Don't init fpu multiple times on smp systems
* Verified fpu is still started on smp and non-smp
* SSE code still generates general protection faults
on smp systems though
* Rename init_sse to init_fpu and handle FPU setup.
* Stop trying to set up FPU before VM init.
We tried to set up the FPU before VM init, then
set it up again after VM init with SSE extensions,
this caused SSE and MMX applications to crash.
* Be more logical in FPU setup by detecting CPU flag prior
to enabling FPU. (it's unlikely Haiku will run on
a processor without a fpu... but lets be consistant)
* SSE2 gcc code now runs (faster even) without GPF
* tqh confirms his previously crashing mmx code now works
* The non-SSE FPU enable after VM init needs tested!
* add Wcscoll() and Wcsxfrm() ICU locale backend
* provide implementations of wcscoll() and wcsxfrm() that are using
the respective methods of the locale backend
* Casts like BReference<Derived> to BReference<Base> are now possible.
* This cast for BWeakReference is, because of the underlying structure, not automatically type safe. I used a simple hack to make the compiler complain if the cast
is not type safe. Please take a look if that can be done better.
* Smaller style and bug fixes.
* make room in mbstate_t for containing an ICU-converter's state
(well, in fact the whole converter object)
* adjust libroot's locale add-on to clone converters into a given
mbstate_t directly
* adjust ICUThreadLocalStorageValue to contain the converter pointer
instead of a converter-ID (if the converter is related to an
mbstate_t, it points into the mbstate_t).
* adjust users of converters to directly use converter pointers
instead of ICUConverterRef
* drop now unused ICUConverterManager and ICUConverterRef
* update gcc4 optional package
This brings our multibyte implementation into a fully working state,
both non-ascii and non-8-bit characters can now be handled normally
in the Terminal, i.e. this finally fixes#6276.
N.B.: Since the size of mbstate_t has changed, everything (including
the compiler!) needs to be rebuilt.
* I'd rather this be common code, but I don't have access
to the DisplayPort specifications. If I added it as common
code I would want to be 100% it was complete and variables
were named properly.
* For now putting in radeon_hd private headers
* add MultibyteStringToWchar() to ICU locale backend
* implement mbsrtowcs() and mbsnrtowcs() on top of
MultibyteStringToWchar()
* drop respective glibc files
This one works with non-terminated strings that we may need to handle.
It also validates that the sequence is valid UTF-8 so it results in
the same behaviour as the version that is used when converting to
codes (syncing the enumeration and drawing behaviour).
This allows to use the debug features of the guarded heap also on
allocations made through the object cache API. This is obivously
horrible for performance and uses up huge amounts of memory, so the
initial and grow sizes are adjusted accordingly.
Note that this is a rather simple hack, using the object_cache pointer
to transport the allocation size. The alignment is neglected completely.
This adds a pair of functions vm_prepare_kernel_area_debug_protection()
and vm_set_kernel_area_debug_protection() to set a kernel area up for
page wise protection and to actually protect individual pages
respectively.
It was already possible to read and write protect full areas via area
protection flags and not mapping any actual pages. For areas that
actually have mapped pages this doesn't work however as no fault, at
which the permissions could be checked, is generated on access.
These new functions use the debug helpers of the translation map to mark
individual pages as non-present without unmapping them. This allows them
to be "protected", i.e. causing a fault on read and write access. As they
aren't actually unmapped they can later be marked present again.
Note that these are debug helpers and have quite a few restrictions as
described in the comment above the function and is only useful for some
very specific and constrained use cases.
They can be used to mark pages as present/non-present without actually
unmapping them. Marking pages as non-present causes every access to
fault. We can use that for debugging as it allows us to "read protect"
individual kernel pages.
* The vm86 code or the code running in virtual 8086 mode may clobber the
%fs register that we use for the CPU dependent thread local storage
(TLS). Previously the vm86 code would simply restore %fs on exit, but
this doesn't always work. If the thread got unscheduled while running
in virtual 8086 mode and was then rescheduled on a different CPU, the
vm86 exit code would restore the %fs register with the TLS value of
the old CPU, causing anything using TLS in userland to crash later on.
Instead we skip the %fs register restore on exit (as do the other
interrupt return functions) and explicitly update the potentially
clobbered %fs by calling x86_set_tls_context(). This will repopulate
the %fs register with the TLS value for the right CPU. Fixes#8068.
* Made the static set_tls_context() into x86_set_tls_context() and made
it available to others to faciliate the above.
* Sync the vm86 specific interrupt code with the changes from hrev23370,
using the iframe pop macro to properly return. Previously what was
pushed in int_bottom wasn't poped on return.
* Account for the time update macro resetting the in_kernel flag and
reset it to 1, as we aren't actually returning to userland. This
didn't cause any harm though as only the time tracking is using that
flag so far.
* Some minor cleanup.
