augustss
34e97b4c65
Regen.
1999-11-06 11:18:00 +00:00
augustss
3514a2e115
Add SIIG devices. Closes PR kern/8754 from Andreas Wrede <andreas@planix.com>
1999-11-06 11:17:30 +00:00
thorpej
4a09180976
Don't pass rd/mult capability though a PCI-PCI bridge. The bridge would
...
have to break it up into mutliple rd/line's anyhow, so why bother letting
the device issue it in the first place.
1999-11-04 19:04:04 +00:00
thorpej
110ac27449
Make sure devices are told they can use rd/line, rd/mult, and wr/inval.
1999-11-04 19:03:00 +00:00
tsarna
c0b20561f7
regen
1999-11-04 16:18:41 +00:00
tsarna
9df6f09e30
Add Aureal AU8820
1999-11-04 16:02:20 +00:00
augustss
fb580e3f6e
Regen.
1999-11-04 10:34:40 +00:00
augustss
1289659618
Add SBLive!
1999-11-04 10:34:03 +00:00
joda
c8532c3ebe
regen
1999-11-04 09:39:17 +00:00
joda
dbfcb792e1
add Xircom X3201-3 Fast Ethernet Controller
1999-11-04 09:38:38 +00:00
thorpej
e3f20e8ff1
Use Memory Read Line and Memory Read Multiple on the 21140, 21140A,
...
21142, and 21143, if the PCI bus says its okay.
1999-11-04 01:20:55 +00:00
thorpej
a4e1bde0b3
Print out if the read {line,multiple} and write/invalidate commands are
...
okay to use.
1999-11-04 01:03:34 +00:00
thorpej
ca9b9a3b2e
Adapt to mii_phy_probe() change.
1999-11-04 00:24:00 +00:00
mycroft
4f1f2c6398
Fix silly error that caused the secondary channel to be ignored if the primary
...
channel was disabled.
1999-11-03 14:54:07 +00:00
augustss
361b083d4c
Shorten some delay()s. From WITEK Wnuk <witek@atari.org>
1999-11-02 17:48:01 +00:00
kleink
b536890c88
Add a mixer control for the Master Volume Mute knob.
1999-11-02 12:11:42 +00:00
augustss
72a864f78c
Add the midibus attribute to the fms driver.
1999-11-02 11:58:06 +00:00
soren
09c41837ce
Fix crash when both 1370 and 1371/1373 devices are configured.
...
Update documentation links.
XXX The initial volume of the 1371 mixers is set to 255. Should be ~200.
1999-11-02 05:40:59 +00:00
thorpej
c8852145bc
Get fms MPU and OPL module inclusion right.
1999-11-02 00:29:20 +00:00
augustss
3c40153ea9
Fold some long lines and make it compile with the new auconv functions.
1999-11-01 23:26:58 +00:00
augustss
7c8206c662
Add a missing file for the fms driver.
1999-11-01 21:54:12 +00:00
augustss
8cd393778b
Regen.
1999-11-01 20:43:51 +00:00
augustss
684aa0605c
Add FM801 audio device driver. From Witold J. Wnuk ww181302@zodiac.mimuw.edu.pl
...
Closes PR kern/8729.
1999-11-01 20:43:12 +00:00
augustss
860ebb7a92
Make little endian and big endian version of all functions
...
that deal with 16 bit samples. Let the drivers decide which ones
to use.
1999-11-01 18:12:19 +00:00
haya
8553661a5e
Maintainance the name of Ricoh PCI-CardBus bridges.
1999-11-01 08:58:45 +00:00
augustss
6346873ea6
Use the right attribute for attaching USB controllers.
...
From MAEKAWA Masahide <bishop@rr.iij4u.or.jp>
1999-10-30 17:03:30 +00:00
sommerfeld
db05febdfa
Add enable/disable support and EEPROM size selection, prerequisites
...
for getting the cardbus fxp attachment to work.
Tested on the built-in 82559 in a VAIO Z505S.
From Johan Danielsson / PR8631; changed slightly to KNF.
1999-10-30 16:07:58 +00:00
augustss
3d0e8ae9dd
Make this file compile again by using the same names as in pcidevs.
1999-10-30 16:02:28 +00:00
augustss
a498fbea5f
Add midibus attribute for eap.
1999-10-30 14:11:16 +00:00
augustss
613db45d20
Add MIDI support.
...
Closes PR 8578.
1999-10-29 23:03:18 +00:00
matt
471ab17680
Regen.
1999-10-29 21:31:30 +00:00
matt
c707186f57
Add AHA-1480 (adaptec cardbus scsi)
1999-10-29 21:30:19 +00:00
haya
65c3b4c4c7
Maintainance the name of Ricoh PCI-CardBus bridges.
1999-10-29 07:57:38 +00:00
thorpej
9d820e6fab
Add some 21142/21143 goo.
1999-10-28 23:32:37 +00:00
mjacob
44c603dd7b
Remove reference to loadable f/w.
1999-10-28 16:11:19 +00:00
leo
38cae5303b
Remove htopci(). bus_space_write_4() takes care of necessary endian conversions.
1999-10-28 13:49:19 +00:00
augustss
8ecf3c7c3e
Add support for ES1371. From OpenBSD and Ezra Story <ezy@panix.com>.
1999-10-27 13:20:34 +00:00
haya
0263d8db3d
Do not stop no matter when pci_mapreg_map fails to map bridge socket
...
registers. When it fails, reset Socket Base Address register and map
registers using rbus.
1999-10-27 00:48:36 +00:00
bouyer
0021900156
Add a missing '\n' in the cmd0640 attach printfs.
1999-10-25 14:13:12 +00:00
haya
5aa225ed2e
Disable legacy io port before the bridge is probed as a pcic on isa.
...
Comments ware changed to comply the KNF.
Add PCCBB_PCMCIA_16BITONLY to support TI PCI103X series.
1999-10-19 09:29:46 +00:00
mjacob
cdad48e3b7
Oops- missed a MAXISPREQUEST sized thing- these are all gone now. It's amazing
...
this didn't eat me.
1999-10-17 02:40:26 +00:00
mjacob
2b4cd26aa4
stylistic cleanups
1999-10-17 01:22:08 +00:00
augustss
c175d023d0
Comment out some debug settings.
...
Change attach printing so it looks more standard.
1999-10-15 10:59:56 +00:00
haya
e5cc414836
add NetBSD ID tag.
1999-10-15 06:42:21 +00:00
haya
4eee111127
This is the first check-in of CardBus driver. CardBus driver contains
...
CardBus bus stub, YENTA PCI-CardBus bridge (cbb), 3Com 3C575TX driver
(ex) and Intel fxp driver.
TODO:
o Conform to the KNF more strictly.
o Be unified with pcmcia code as much as possible.
o Add more drivers for CardBus card, such as APA-1480 or USB card.
The affected files are listed below.
sys/arch/i386/conf/files.i386
sys/arch/macppc/conf/files.macppc
sys/conf/files
sys/dev/ic/elinkxl.c
sys/dev/ic/elinkxlvar.h
sys/dev/ic/i82365.c
sys/dev/ic/i82365var.h
sys/dev/isa/i82365_isasubr.c
sys/dev/pci/files.pci
sys/dev/pcmcia/pcmcia.c
sys/dev/pcmcia/pcmciachip.h
The added files are listed below.
sys/arch/i386/conf/CARDBUS
sys/arch/i386/include/rbus_machdep.h
sys/arch/i386/i386/rbus_machdep.c
sys/arch/macppc/include/rbus_machdep.h
sys/arch/macppc/macppc/rbus_machdep.c
sys/dev/cardbus/if_ex_cardbus.c
sys/dev/cardbus/Makefile.cardbusdevs
sys/dev/cardbus/cardbus.c
sys/dev/cardbus/cardbus_map.c
sys/dev/cardbus/cardbusdevs
sys/dev/cardbus/cardbusdevs.h
sys/dev/cardbus/cardbusdevs_data.h
sys/dev/cardbus/cardbusvar.h
sys/dev/cardbus/cardslot.c
sys/dev/cardbus/cardslotvar.h
sys/dev/cardbus/devlist2h.awk
sys/dev/cardbus/files.cardbus
sys/dev/cardbus/if_fxp_cardbus.c
sys/dev/cardbus/pccardcis.h
sys/dev/cardbus/rbus.c
sys/dev/cardbus/rbus.h
sys/dev/pci/pccbb.c
sys/dev/pci/pccbbreg.h
sys/dev/pci/pccbbvar.h
1999-10-15 06:07:17 +00:00
mjacob
83bb47c85a
F/W version no longer relevant. Only do WWN seed for FC cards.
...
Now we malloc xflist and dma maps in mailbox setup routines.
We also do the appropriate endian swizzling at the end of a dma
map routine.
1999-10-14 02:14:35 +00:00
thorpej
358756a995
Add declaration for the Adaptec AIC-6915 64-bit 10/100 Ethernet interface.
...
Note: this is a placeholder right now; the driver should be ready in the
next few days.
1999-10-13 18:37:12 +00:00
augustss
b14b78dfc9
Deallocate resources (bus space and interrupts) when detaching from
...
the bus.
1999-10-12 11:21:24 +00:00
hannken
9d12a71473
Add support for `Adaptec AHA 2940UW Pro'.
...
Behaves like the `Adaptec AHA 2940UW'.
Device info: product id = 0x8778, Chip = AIC7880P.
1999-10-12 08:41:55 +00:00
hannken
2f3b72ae59
Regen.
1999-10-11 17:33:51 +00:00
hannken
5e63221d99
Add an entry for the Adaptec 2940UW Pro Scsi adapter.
1999-10-11 17:31:52 +00:00
cgd
c3703ecfdd
don't print using string pointer one off the end of the eso_rev2model
...
array. pointed out by Kouichi Hashikawa in PR#8601.
1999-10-10 18:52:03 +00:00
cgd
c3d5267629
Don't burst into flame when a QUEUE FULL message is received. Also,
...
do a gross hack which allows seemingly-broken quantum drives to function
with this driver. The gross hack is to disable tagged queueing completely
when QUEUE FULL is received. That costs performance on drives which
do tagged queueing properly and which return QUEUE FULL, but given the way
this driver works it's seems to be the only thing short of significant
recoding which will make it function with the quantum drives in question.
1999-10-08 20:43:45 +00:00
drochner
0b5c897fd0
1. include headers for NS support
...
2. pull in a fix from FreeBSD:
revision 1.18
date: 1999/09/17 18:04:14; author: wpaul; state: Exp; lines: +3 -3
Remember to account for ETHER_ALIGN when setting the maxmimum packet
length for mini receive ring. The max length was MHLEN, however the mbufs
are actually shortened to MHLEN - ETHER_ALIGN to force payload alignment.
1999-10-06 11:23:33 +00:00
thorpej
a339b2839b
Have I mentioned how much I love this driver? Fix the code in the tagged
...
queueing support that decreases the number of openings on a device; it
previously assumed that a scsipi_link's `openings' were descreased as
commands were issued, which is not longer the case (`active' is increased).
1999-10-05 17:45:57 +00:00
thorpej
120e8cac48
Fix a botch when updating for the SCSIPI changes.
1999-10-05 00:29:41 +00:00
thorpej
63b8530b4e
Update for SCSPI changes.
1999-09-30 23:04:39 +00:00
thorpej
30e63d853c
Define flags in pci_attach_args which indicate it's okay to use the
...
Memory Read Line, Memory Read Multiple, and Memory Write and Invalidate
PCI commands.
1999-09-30 20:30:06 +00:00
thorpej
2492ffef4c
Changes to get the Lite-On/Macronix 82C115 working:
...
- 82C115 has a 128-bit multicast hash table, not 512-bit.
- Correct the way the MAC address is read from the SROM, after re-reading
the MX98715A Application Note.
Other semi-related changes:
- Differentiate between MX98715 and MX98715A.
- Improve the Macronix link-up/link-down detection.
1999-09-30 17:48:24 +00:00
thorpej
e3398d3647
- Get a little closer on the Macronix chips. Still some more work to do.
...
- Add some basic support for the ADMtek AL981 clone (which, unfortunately,
I can't test until my sample boards arrive).
1999-09-29 18:52:19 +00:00
ad
f6e42db75a
- Move initial reset code into dpt_readcfg()
...
- Bus specific front-end is now responsible for reading EATA configuration
- EATA configuration data is now saved in the softc
- Make synchronous writes work properly
- Don't ignore HBA timeouts in dpt_cmd()
- Prefix eata_cfg's members with `ec_', not `dc_'
1999-09-29 17:33:02 +00:00
thorpej
1cb047331b
Regen.
1999-09-29 00:20:25 +00:00
thorpej
33f02f24b7
- Add Sundance Technolgy vendor ID.
...
- Add Sundance Technolgy ST201 10/100 Ethernet product ID.
- Add D-Link DFE-550TX product ID (uses ST201 chip).
1999-09-29 00:19:51 +00:00
thorpej
e2504d1efc
Regen.
1999-09-29 00:07:51 +00:00
thorpej
8f22cca8ea
Add adaptec AIC-6915 10/100 Ethernet.
1999-09-29 00:07:15 +00:00
thorpej
df12499646
Add code to take a device out of Power-Down state if it's in such a state,
...
and attempt to attach Macronix chips.
1999-09-28 23:12:23 +00:00
kleink
bb54953b63
Since the Audio 1 DMA controller implements the 24 low address bits only,
...
add the gross hack originally implemented by Charles Hannum in the SonicVibes
driver to force allocation of DMA memory for that channel through the Scatter-
Gather Map to get an address range that fits in.
The eso driver now works on Alphas except for DWLPX-based systems, whose owners
are not likely to desire audio or likely can afford slightly less cheap audio
hardware. :-)
1999-09-28 13:57:45 +00:00
ad
f653cce944
Regen.
1999-09-27 23:46:56 +00:00
ad
94367db635
s@SmartCache/Raid@SmartCache/SmartRAID@
1999-09-27 23:45:57 +00:00
ad
a289fc5023
Add glue for 'dpt' driver.
1999-09-27 23:44:27 +00:00
ad
48a0b6237a
A driver for DPT EATA SCSI adapters. dpt.c contains a brief TODO list.
1999-09-27 23:41:47 +00:00
cgd
6146ed7db8
add classes/subclasses new in PCI 2.2. Needs a bit of cleanup, but then,
...
so does everything involving configuration space headers and if i don't
get this out of my source tree i'll go insane.
1999-09-27 03:20:47 +00:00
thorpej
2bc8340297
Add a quirk entry for the Asante 21140[A] boards that don't use the
...
ISV SROM format. For these boards, we provide the GPIO pin direction
info, a separate reset hook, and hard-wire them to MII-on-SIO.
Based on a patch submitted by Luoqi Chen <luoqi@chekov.watermarkgroup.com>.
1999-09-26 05:03:58 +00:00
thorpej
4d4ddf363f
Some 21140[A] boards don't use the ISV SROM format (e.g. Asante boards),
...
but instead use the older DEC Address ROM format.
From a patch supplied by Luoqi Chen <luoqi@chekov.watermarkgroup.com>.
1999-09-26 04:43:45 +00:00
thorpej
b76293b895
Add quirk entry support for the 21041 and 21140 chips. Initial quirks
...
for these: extract the spiffy DEC board names (e.g. DE500-AA).
1999-09-26 04:37:29 +00:00
thorpej
4fa51ba8bd
Make tlp_read_srom() work on big-endian systems.
...
From a patch supplied by Luoqi Chen <luoqi@chekov.watermarkgroup.com>.
1999-09-26 03:39:01 +00:00
thorpej
c999e3ca1a
Add support for the DECchip 21140[A]. This currently only works with
...
boards which use MII for media attachment.
ISV SROM format information lifted from Matt Thomas's `de' driver.
Thanks to Dave Sainty for experimenting w/ his 21140A MII boards, and
for supplying a fix to the MII bit-bang code (PR #8382 ).
1999-09-25 00:27:00 +00:00
kleink
d9abf5e332
Add Game Port definitions.
1999-09-23 11:50:19 +00:00
kleink
cef2689773
Oops, we do have to check ourselves whether a given value is valid within an
...
enumeration.
1999-09-23 11:46:12 +00:00
mhitch
7460a0be93
Set sc_cfg3_fscsi for the AMD53C974 to match the change in ncr53c9x.c.
1999-09-22 03:32:00 +00:00
thorpej
664d8da4f5
Add support for the DECchip 21041. This also adds some preliminary
...
support for the ISV SROM format used in the 2114{1,1A,2,3}. Note, like
the 21040, auto-sense is not yet supported for the 21041.
Add a "pre-init" hook, which will be used for the 2114x and PNIC (currently)
which allows chip-specific code to set up and write OPMODE before the
chip is reset. This is necessary in order for the chip's internal
pathways to get initialized properly for MII/SYM/PCS/SIA media attachments.
Thanks to Dave Sainty for the hint from the `de' driver that inspired the
pre-init hook.
1999-09-20 19:26:54 +00:00
thorpej
6961f081e5
Fix packet reception in promiscuous mode: compare the Ethernet destination
...
address against our station address if it's not a multicast packet. Either
the Rhine manual lies about the phys/broadcast/multicast rxstatus bits,
or the Rhine chip is just broken.
Fixes a redirect storm problem reported by Laine Stump on current-users.
1999-09-20 17:40:58 +00:00
thorpej
79f938f5f8
Fix a few buglets in the multi-port 21040 code. ZNYX ZX314 confirmed
...
working now.
1999-09-17 21:55:01 +00:00
augustss
7049e8eb1b
Add preliminary (untested) code for detaching the USB host controller
...
(needed for CardBus based controllers).
1999-09-15 10:25:30 +00:00
thorpej
f23c7a31b4
Make sure 21040 chips are at least pass 2.0 and that 21140 chips are at
...
least pass 1.1.
1999-09-14 23:43:10 +00:00
thorpej
70997fd3d5
Move the PCI device number to the base Tulip softc; it will be needed to
...
decode the SROM on 21041 and 2114x multi-port boards.
1999-09-14 23:33:04 +00:00
thorpej
5c34356d4c
First crack at shared ROM/shared interrupts on 21040 multi-port boards,
...
plus quirk identification for non-multiple-port boards.
1999-09-14 22:25:48 +00:00
augustss
a6aa488db9
Don't do IO before we have set the tag and handle.
1999-09-14 09:29:05 +00:00
thorpej
e2a320f925
Oops, fix Winbond regshift.
1999-09-14 05:59:53 +00:00
thorpej
12c167b5ca
Change the semantics of `sc_regshift'; it is now the shift required to
...
make a CSR index number into a CSR offset. Introduce a couple of macros
to handle CSR name -> offset conversion.
1999-09-14 05:52:21 +00:00
augustss
10d4a4d5fe
And commit two files I forgot in the rearrangement for testing for
...
interrupt context.
1999-09-14 01:07:13 +00:00
thorpej
a03bd733ca
- More PNIC NWAY stuff. Still more work to do, here.
...
- Fix the SROM checksum routine.
- Add code to parse the old DEC Address ROM SROM format.
- Rearrange the statchg routines a bit, to make them consistent with one
another.
- Add support for the DECchip 21040. XXX No support for media autosense
yet, and no support for any of the multi-port boards yet.
1999-09-14 00:55:38 +00:00
soren
203f000d1a
Regen.
1999-09-11 06:27:36 +00:00
soren
dfbe7449e4
Add ENI SpeedStream.
1999-09-11 06:27:25 +00:00
augustss
6a58ae2d93
Regen.
1999-09-10 19:56:51 +00:00
augustss
fb9d7d86ae
Add more TI CardBus bridges. Taken from the CardBus patches.
1999-09-10 19:55:54 +00:00
thorpej
a10045109d
Add chip types for several more Tulip clones (ASIX, ADMtex, PNIC II, Davicom),
...
and match the Compex RL100-ATX; it uses the Winbond 89C840F (RL100-TX is
a Macronix 98713).
1999-09-08 22:29:46 +00:00
thorpej
e0c4f8ff92
Regen.
1999-09-08 22:25:56 +00:00
thorpej
dfdd1affb4
Add some more Tulip clones.
1999-09-08 22:25:19 +00:00
thorpej
ab08b6b863
Update for Lite-On product ID change.
1999-09-08 21:42:44 +00:00
thorpej
ab7310ed6e
Regen.
1999-09-08 21:39:54 +00:00
thorpej
9bb30be866
Add Davicom Semiconductor vendor ID, and Davicom DM9102 10/100 Etherent
...
product ID (Yet Another Tulip Clone).
1999-09-08 21:39:24 +00:00
thorpej
187510560e
Regen.
1999-09-08 21:34:33 +00:00
thorpej
46e11c9fd8
LITEON_PNIC -> LITEON_82C168
1999-09-08 21:33:59 +00:00
augustss
e1766aacfa
Make sure not to use the io handle before it's been initialized.
1999-09-04 22:00:32 +00:00
thorpej
6a2319b969
Byte swap the EEPROM words on the PNIC. From Stephen Ma.
1999-09-03 00:24:56 +00:00
ross
533b6088cd
Make it compile.
1999-09-02 23:23:03 +00:00
kleink
9c10799ac4
Use the approximated sampling rate to compute the filter rate.
1999-09-02 17:26:15 +00:00
fvdl
a6aa19699f
Don't assume that an -FX card has MII (because it doesn't).
1999-09-01 20:26:43 +00:00
kleink
480e8a1a1c
No longer requires mpuvar.h.
1999-09-01 18:03:10 +00:00
bouyer
ce80d27933
Don't try to unmap unmapped space in case of failure in
...
pciide_mapregs_compat(). From OpenBSD.
1999-09-01 15:17:07 +00:00
drochner
7c34574b94
add "ti" - Alteon Gigabit Ethernet
1999-09-01 11:54:32 +00:00
drochner
45e5d743af
quick 'n dirty port of FreeBSD's Alteon Gigabit Ethernet driver.
...
todo:
-IPv6
-clean up jumbo buffer allocation - NetBSD provides an opaque argument
to the free function, thus doesn't need the hack done here
-deal correctly with the mapping of the shared memory
1999-09-01 11:47:46 +00:00
drochner
7eaa4e57fd
regen
1999-09-01 11:42:32 +00:00
drochner
7c2d8bc001
-add some incarnations of the Alteon gigabit Ethernet adapter
...
-sort some entries which were put in by legasthenics
1999-09-01 11:40:42 +00:00
kleink
e5d76dce61
Don't make a human-readable device description being printed at attach time
...
depend on PCIVERBOSE.
1999-09-01 07:32:31 +00:00
thorpej
e293024ffa
This is the long-awaited "new Tulip driver", a complete, from-scratch
...
rewrite of the driver for the DECchip 21x4x Ethernet chips, and a variety
of clones.
Currently, the driver supports the Winbond 89C840F (this works pretty
well), and the Lite-On PNIC (e.g. NetGear PCI boards), however Lite-On
support may be broken [I may simply have a busted test board].
Eventually, support for the Macronix and ASIX chips will filter into
this driver, and then, slowly, support for the genuine DEC chips,
and maybe even the DE-425 EISA model.
1999-09-01 00:32:41 +00:00
bouyer
8e49b58de0
Add support for Intel 810 chipset (ICH/ICH0).
...
While I'm there merge back piix_channel_map into piix_chip_map.
1999-08-30 12:49:21 +00:00
bouyer
52068f73ce
Add support for the Promise Ultra/33 and /66 pci IDE controller. In addition to
...
chip-dependant code this required the following changes:
- Instead of attaching the device in a generic way with some chip-dependant
routines, use a chip-dependant attach routine with some common code
factored out. The code is marginally bigger, but this allows the CMD64x
flag hack to go away.
- For chips that report per-channel 'irq triggered', test this before calling
wdcintr() for the native-pci irq case (compat intr can't be shared),
as wdcintr() has no good way to know if a irq was for it or not, and
ends up with irq loss. XXX for chips that don't have this feature irq sharing
will not work properly !
- add my copyrigth notice (could have been done some time ago I think :)
There are still some issues to be solved with the Promise controller and
ATAPI devices.
Many thanks to Paul Newhouse for shipping me 2 Ultra/33 boards for doing this
work.
1999-08-29 17:20:10 +00:00
bouyer
4819ee1cf1
Add definitions of the DMA mode control registers. They should be used
...
by pciide, but I have yet to find how to map them.
1999-08-29 17:06:43 +00:00
augustss
64c7328230
Regen.
1999-08-28 09:22:58 +00:00
augustss
d0fbee34df
Add a bunch of i810 devices. From Paul Shupak <paul@plectere.com>.
1999-08-28 09:18:08 +00:00
thorpej
299c0b1d83
Regen.
1999-08-27 23:27:39 +00:00
thorpej
e1b0108ce6
Add Samsung Semiconductor KS8920 10/100 Ethernet.
1999-08-27 23:25:36 +00:00
soren
aa550d38fb
Regenerate.
1999-08-24 21:32:25 +00:00
soren
fa181849a2
Add Intel i740.
1999-08-24 21:32:04 +00:00
augustss
5d8adfb5a2
Disable interrupts early.
1999-08-21 21:35:36 +00:00
sommerfeld
be5fe633b8
clean up attach messages slightly.
1999-08-20 03:36:59 +00:00
matt
fd59bba7cb
after bus_dmamem creating some memory, zero it out. This has stopped
...
my alpha from getting COMMAND FAILED on random boots.
1999-08-19 00:43:45 +00:00
drochner
f61d8fd937
regen
1999-08-17 09:42:14 +00:00
drochner
c8aabedc83
-mention a location where the old PCI database can still be found
...
-add Alteon Gigabit Ethernet
1999-08-17 09:40:25 +00:00
mcr
03946f957a
Added Solidum Systems PCI vendor ID and Device IDs
1999-08-16 21:36:39 +00:00
kleink
48f055e09b
Add missing MPU interrupt glue.
1999-08-14 22:42:16 +00:00
kleink
7b34e008a9
Forgot to initialize a pointer; from Simon Burge.
1999-08-14 15:05:02 +00:00
hwr
4882320d4b
Initialize error variable. Should fix spurious init errors.
...
From Dave Huang in PR 8205.
1999-08-14 11:23:39 +00:00
hwr
af827a1284
Remove dulicate "Ethernet" output. From Dave Huang in PR 8206
1999-08-14 11:09:18 +00:00
bouyer
59af828a94
Regen.
1999-08-12 09:43:18 +00:00
bouyer
7c3cb9c796
Add Promise Ultra66, change entry of Ultra33 to reflect the fact that can
...
"only" do ultra/33.
1999-08-12 09:42:11 +00:00
tron
439a6c4942
Add missing prototype for read_tekram_eeprom() to make driver compile if
...
"options NCR_TEKRAM_EEPROM" is specified in the kernel configuration file.
Patch supplied by Hans Hoppe in PR kern/8141.
1999-08-04 20:51:31 +00:00
thorpej
4bd8f1566c
Be a little nicer about memory usage:
...
* Don't allocate receive buffers until the interface is actually brought
up, and release all of them if the interface is taken down.
* Add a knob (defaults to off) which will copy an incoming packet to
a single header mbuf if it is small enough to fit in one, rather than
burning an entire cluster on it. Note that this change will be mostly
moot if/when sbcompress() it changed to handle compressing clusters.
1999-08-03 17:25:51 +00:00
augustss
dbb71e4b35
Add the file I forgot at the previous MPU changes.
1999-08-03 00:27:27 +00:00
augustss
42fb510148
Move the mpu device declaration to conf/files.
...
Let the mpu device attach at the sb device, and then midi at the mpu.
Update the mpu at eso attachment.
1999-08-02 17:37:41 +00:00
augustss
cbf1f6f1b9
Move the MPU driver isa/ to ic/.
...
(I didn't move it in the repository because the revision history
is very short and uninteresting. :)
1999-08-01 18:05:39 +00:00
veego
9baa857f5b
Regen.
1999-08-01 08:32:48 +00:00
veego
9657de4af2
Add an entry for the TI PCI1211 PCI-CardBus Bridge.
...
From the cardbus patches.
1999-08-01 08:32:08 +00:00
thorpej
76dcbfad36
Regen.
1999-07-29 20:58:19 +00:00
thorpej
8548b384f5
Add some Initio SCSI controller IDs.
1999-07-29 20:56:55 +00:00
bouyer
a81c366fed
Bump MAX_START to 256, so that the ncr driver can work with more than 5
...
devices on the same bus. See PR kern/6347 for details.
1999-07-29 10:00:34 +00:00
soren
7220690fb8
Regen.
1999-07-28 22:38:00 +00:00
soren
4341d92cb3
Correct Acard device names.
...
Add and update a few IBM devices.
Add Toshiba and NEC devices in Portege 3K's.
1999-07-28 22:36:10 +00:00
castor
0a1820a4e7
regen
1999-07-27 17:55:00 +00:00
castor
424a28aa79
Add vendor ID for Geocast
1999-07-27 17:52:59 +00:00
thorpej
b73b84643f
Add support for the SMC 83c175. Also, print out the chip rev when
...
we attach.
1999-07-27 00:37:34 +00:00
thorpej
f48807a678
Regen.
1999-07-27 00:24:06 +00:00
thorpej
b5dc3f5708
Add product ID for the SMC 83c175 Fast Ethernet chip. This is a cousin
...
of the SMC 83c170 which also supports CardBus.
1999-07-27 00:23:47 +00:00
drochner
963921febe
regen
1999-07-20 20:59:03 +00:00
drochner
62adeef8f6
add TI TVP4020 Permedia 2
1999-07-20 20:58:20 +00:00
ross
5122ae5f44
Recognize 3c905C.
1999-07-15 18:10:29 +00:00
ross
4dae830922
Regen.
1999-07-15 18:06:39 +00:00
ross
4495d8362a
product 3COM 3C905CTX 0x9200
1999-07-15 18:02:08 +00:00
augustss
50eef750e4
Regen.
1999-07-15 14:53:13 +00:00
augustss
8a5bb754c7
Add Cinemaster C 3.0 DVD Decoder.
1999-07-15 14:52:48 +00:00
fvdl
76b2d00f39
Regen.
1999-07-14 23:03:09 +00:00
fvdl
a641b41593
Add/change a few Adaptec controller IDs.
1999-07-14 23:02:01 +00:00
kleink
cf917747a1
Add a driver for the ESS Technology Solo-1 PCI AudioDrive line of chips.
1999-07-12 15:13:30 +00:00
kleink
7d8abaa49e
Regen.
1999-07-12 15:04:41 +00:00
kleink
ecbc7c6afd
Change the ESS Solo-1 description string to match the data sheet.
1999-07-12 15:02:46 +00:00
bouyer
0612a1ddef
Fix typo in a printf, from Soren S. Jorvan.
1999-07-12 13:49:38 +00:00
kleink
2422638ad5
Fix a buglet in the driver's DMA buffer list ipmlementation, causing the next-
...
in-list (wrong) descriptor structure of the buffer in question to be freed.
1999-07-10 16:46:19 +00:00
mjacob
3bb408eb05
Change to approved NASA/Ames copyright. Add in Qlogic 2200 support.
1999-07-05 20:28:11 +00:00
cgd
636e8f4688
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 05:55:23 +00:00
cgd
111e8a47c4
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37).
...
This means that all SIIG PCI serial/parallel cards (described on their
web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 05:38:05 +00:00
itojun
118d2b1d4f
IPv6 kernel code, based on KAME/NetBSD 1.4, SNAP kit 19990628.
...
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
1999-07-01 08:12:45 +00:00
drochner
6d864c0914
add driver for the Bit3 PCI-VME adapter, without the DMA parts for now
1999-06-30 17:45:38 +00:00
fair
3a845702d7
A reference to http://members.hyperlink.net.au/~chart/pci.htm in comments;
...
this new effort at collecting PCI data outside the PCI SIG replaces the
one that was referenced in here before.
No regeneration required.
1999-06-30 16:52:52 +00:00
drochner
dbd86a254c
add driver for realtek 8129/8139, from freebsd, with mii stuff kicked out
1999-06-27 15:19:40 +00:00
drochner
746543928c
regen
1999-06-27 15:15:00 +00:00
drochner
120b30daf4
add some realtek 8139 clones
1999-06-27 15:13:54 +00:00
pk
37d80b004f
Remove dead file; alphabetize
1999-06-20 18:17:22 +00:00
pk
df81191ccd
Remove dead file
1999-06-20 18:07:18 +00:00
thorpej
4a0270a264
Intel i82557 driver is now split into bus and chip bits.
1999-06-20 16:35:40 +00:00
augustss
d98b0bd725
Regen.
1999-06-19 04:51:42 +00:00
augustss
0650293580
Add Sony CXD 1947A FireWrire Controller and Neomagic 128XD.
1999-06-19 04:49:52 +00:00
tsubai
12c2ab7750
Regen.
1999-06-18 04:55:27 +00:00
tsubai
25b9bffe81
Add some Apple and MOT products.
1999-06-18 04:54:06 +00:00
dante
35e149ef50
Move chip version check from advlib.c to adv_pci.c
1999-06-12 12:09:58 +00:00
mrg
efb227d3a7
fix a few KNF nits ..
1999-06-08 10:38:15 +00:00
tron
a1259a8d1b
Regen.
1999-06-05 10:42:15 +00:00
tron
bffc27b587
Add Matrox MGA 400, 3Dfx Banshee and Voodoo 3.
1999-06-05 10:41:37 +00:00
tron
2b262e8565
Regen.
1999-06-05 09:44:03 +00:00
tron
fce6975678
Add entry for Riva TNT and correct entry for Riva 128.
...
Fixes first half of PR kern/7699 by Bjoern Labitzke.
1999-06-05 09:43:21 +00:00
drochner
ee9cd19ba7
regen
1999-06-02 08:57:02 +00:00
drochner
1fabcae9bf
add SIS 6326 low-end AGP graphics
...
fix CL_PD6832 device id, PR kern/7691 from Paul Dokas
1999-06-02 08:56:03 +00:00
thorpej
f687b845d0
Make sure bus mastering is enabled; some broken BIOSes don't set this
...
up properly.
1999-06-01 19:17:59 +00:00
thorpej
2349cbb5b3
Glue in the SiS900 Ethernet controller driver.
1999-06-01 18:29:50 +00:00
thorpej
ba43886d7e
Device driver for the Silicon Integrated Systems SiS900 10/100 Ethernet
...
chip, found on the IBM Netstation.
1999-06-01 18:19:13 +00:00
mrg
58aa48a579
regen.
1999-05-29 07:12:11 +00:00
mrg
5dfbc15479
fix error in previous.
1999-05-29 07:10:33 +00:00
mrg
3f99c8bd11
regen.
1999-05-29 07:08:52 +00:00
mrg
a250615a3b
s/bus/bridge/ for the sun pci bridges. my bad.
1999-05-29 07:07:51 +00:00
fvdl
06019caad8
Recognize 900B-TPC. From Robert Elz.
1999-05-29 01:31:17 +00:00
fvdl
8a6bddab08
Regen.
1999-05-29 01:29:21 +00:00
fvdl
0ca37269fb
Add 3c900B-TPC product ID. From Robert Elz.
1999-05-29 01:28:52 +00:00
bouyer
cc46db1ba6
For the PIIX, make sure the PIO_mode and DMA_mode get reset to the values used
...
by the controller for all drives.
1999-05-27 09:45:50 +00:00
mrg
c346b0ace0
regen.
1999-05-27 03:05:32 +00:00
mrg
8c83c41668
add the UltraSPARC IIi PCI interface
1999-05-27 02:51:19 +00:00
veego
e21201e114
Regen.
1999-05-23 21:28:03 +00:00
veego
a674692065
Add several entries.
1999-05-23 21:26:54 +00:00
augustss
4655ae1230
Keep track of vendor id and make sure the vendor string is NUL terminated.
1999-05-20 09:52:35 +00:00
augustss
b9f32af4e5
Regen.
1999-05-20 09:23:33 +00:00
augustss
10713ae5ad
Change vendor id 0x11c1 to Lucent since that seems to be what it is now.
...
Add a Lucent USB controller.
1999-05-20 09:23:08 +00:00
thorpej
f98d358a1f
Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
...
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
drochner
d2fe8176fd
regen
1999-05-17 17:08:08 +00:00
drochner
2187089e80
add NeoMagic 256AV Video/Audio chip
1999-05-17 17:07:00 +00:00
thorpej
0d0cc4aa14
Rework the way ukbd attaches itself as the console (again). We now allow
...
the code to pick the first USB keyboard instance as the console, ignoring
which USB controller it's on. Should eventually allow detaching of the
console keyboard.
From Jason Thorpe <thorpej@nas.nasa.gov>
1999-05-13 23:34:38 +00:00
explorer
2fc0e43760
just say no to __BROKEN_INDIRECT_CONFIG
1999-05-12 22:55:14 +00:00
mjacob
61bf929d14
Do a fairly large internal restructuring to accomodate dual-bus host adapters
...
(e.g., the 1240). Include the new 1080/1240 NVRAM layout reading code. Some
moderately significant mailbox changes were necessary also to accomodate a
second channel.
1999-05-12 18:59:23 +00:00
thorpej
83b019c919
Set the data link type to DLT_PPP_SERIAL so that tcpdump can do
...
something useful with our captured frames.
1999-05-11 02:57:58 +00:00
hwr
fbdd142801
Regen.
1999-05-07 21:20:12 +00:00
hwr
0fd4ff06c2
Added CIRRUS CL_PD6832 from "Johnny C. Lam" <lamj@stat.cmu.edu> in kern/7119.
1999-05-07 21:19:06 +00:00
hwr
4d524d7360
Regen.
1999-05-07 21:11:20 +00:00
hwr
91ddf1d6a6
Added TI PCI1251 from joda@pdc.kth.se (Johan Danielsson) in kern/6873.
1999-05-07 21:09:31 +00:00
drochner
1669ea470b
regen
1999-05-07 15:40:57 +00:00
drochner
1ce7678fb8
add another AGP graphics chip and a PCI-VME interface
1999-05-07 15:38:40 +00:00
matt
307a48b721
Regen
1999-05-07 00:57:46 +00:00
matt
e735c2bf67
Add TI LYNX FireWire Controller (as used in the Apple B&W G3)
1999-05-07 00:56:46 +00:00
thorpej
375d7c32f2
Add a way for machine-dependent code to tell a USB controller that it
...
has the console input device. The USB keyboard driver uses this to
attach the first USB keyboard instance as the console keyboard.
Unfortunately, this must still be deferred to autoconfiguration time,
but there's not much we can do about that right now.
1999-05-06 19:12:22 +00:00
mrg
8c630939a3
regen
1999-05-06 14:29:21 +00:00
mrg
10c5298d7e
add pci devices found in U5's:
...
- ati weird mach64
- ebus bus
- `network' hme compatible ethernet
- `simba' PCI bus
1999-05-06 06:17:39 +00:00
thorpej
964b69ec84
Back out previous. Thanks to cgd for pointing out another way to do this.
1999-05-06 01:10:28 +00:00
thorpej
2a4490daa5
Add a `bus' member to the pci_attach_args. This is not normally used,
...
but some child drivers might need to know this information.
1999-05-06 01:01:19 +00:00
bouyer
9893727873
Fix the way we compute the mode to use: for multiword DMA, the used mode was
...
2 less than the one we could really use, so for multiword DMA mode 0 or 1,
the driver tried to use DMA mode 255 or 254 (0 - 2 with a u_int8_t).
1999-05-05 15:24:59 +00:00
ross
7bffc1e720
Protect WDCDEBUG from multiple definitions.
1999-05-03 07:44:47 +00:00
nathanw
4f8cf68674
Rototillage; make this actually useful. To wit:
...
- Initialize more of the Bt463's registers, instead of leaving them
in undefined states. Notably, the window type table is set up
with 8-plane pseudocolor and 24-plane truecolor modes.
- Bus-space-ify, mostly. Could use some more cleanup, but not until
the rest of the tga stuff is converted, too.
- Do the TGA/RAMDAC communication dance more carefully.
- Explain a lot more of what's going on in comments.
1999-04-30 02:47:42 +00:00
ross
770b67425d
Accelerate scrolling. Originally by Roland Dowdeswell, revised by
...
{drocher,ross}@netbsd.org.
1999-04-28 23:24:33 +00:00
thorpej
55fd59f1e0
Make PCI IDE DMA work on big-endian systems.
1999-04-28 00:18:12 +00:00
thorpej
1eb689a712
Make the VIA Rhine driver work on big-endian systems. From Izumi Tsutsui,
...
PR #7305 .
1999-04-26 23:19:10 +00:00
thorpej
4c7a2ee3b0
Fix a couple of problems in the PCscsi-PCI driver:
...
* resid in pcscp_dma_intr() should also be set in the data out phase.
* Don't set up DMA in the transfer pad operations.
* Change URL of the PDF technical manual to the index page.
* include <machine/bswap.h> on big endian machines.
Fixes timeouts writing large blocks to tapes. From Izumi Tsutsui,
PR 7252.
1999-04-25 01:20:02 +00:00
thorpej
207f873ac2
Fix an mbuf leak in the strict alignment case of packet reception.
1999-04-24 22:09:56 +00:00
jonathan
af729a150c
initialize 'p' for lame gcc-2.7.2.2 flow analysis.
1999-04-14 03:26:34 +00:00
jonathan
9e87738e9d
Add entries for TI, Ricoh, Toshiba PCI-to-cardbus bridge chips, so
...
we can identify them as cardbus chips supported by the cardbus patches.
Add entry for OPTI chipsets whose interrupts arent properly set up by
some BIOSes.
From cardbus patches<ftp://nandra.iri.co.jp/pub/NetBSD/CardBus by
HAYAKAWA Koichi <haya@tcad.ulsi.sony.co.jp>.
1999-04-12 23:18:16 +00:00
cjs
ecab881e98
PR 6852 from Chris Jones <cjones@hideo.nervana.montana.edu>.
...
This handles the interrupt structure of Compex boards.
1999-04-12 04:31:55 +00:00
bouyer
2198b984e8
Kill an extra 'pciide0: ' in a printf
1999-04-06 17:49:14 +00:00
mjacob
eebeea5b23
Read the board revision and trim cache line size back from 16 to 1
...
for early revision 2100 boards. Make sure to turn ROM off for these
boards.
1999-04-04 01:14:58 +00:00
tsubai
500edb5379
Fix typo. (From PR 7027)
1999-04-01 14:55:25 +00:00
tsubai
4384fd5134
Fix big-endian support.
...
TULIP_BUSMODE_BIGENDIAN does bswap packet buffers also, so we should use
TULIP_BUSMODE_DESC_BIGENDIAN on big-endian machines. (PR 7027)
XXX 21040 doesn't have this bit, but supporting only 21041+ is better than
nothing.
1999-04-01 11:02:20 +00:00
mjacob
e50460f5fa
Oops- if you enable 1080 support, remember to load the f/w
1999-03-27 01:08:59 +00:00
mjacob
99d46bf762
add isp1080 support and some basic PDB change stuff
1999-03-26 22:39:44 +00:00
bouyer
d907e1f61e
First pass at support of Compaq NetFlex 3/P PCI: this one has
...
IO and Mem base address register inverted.
Still need some MII hack to get it fully fonctionnal.
1999-03-25 16:15:00 +00:00
explorer
6b9af88b99
wrap kernel bits in shared kernel/userland files
1999-03-25 04:09:33 +00:00
explorer
7bfd643eab
install if_lmc*.h
1999-03-25 03:54:43 +00:00
explorer
0c2f5ada28
Commit files for the LAN Media Corporation high speed serial/HSSI/DS3 driver
1999-03-25 03:32:43 +00:00
explorer
960c283a65
Add LAN Media Corporation info
1999-03-25 03:28:17 +00:00
explorer
77597ecd3e
Start commit of Lan Media Corp T1/HSSI/DS3 driver
1999-03-25 00:51:53 +00:00
cgd
fe0bb65b38
in general, it's a good idea to make sure you at least have all of the
...
variables you reference, before you commit something...
1999-03-24 18:47:51 +00:00
mrg
d2397ac5f7
completely remove Mach VM support. all that is left is the all the
...
header files as UVM still uses (most of) these.
1999-03-24 05:50:49 +00:00
thorpej
3993ee01e4
Don't enable I/O or memory access here! These bits in the PCI CSR are
...
set up by the firmware, and indicate which mapping types the system
supports.
1999-03-24 01:07:59 +00:00
thorpej
ac0f626cca
Make sure bus mastering is enabled.
1999-03-24 01:05:15 +00:00
thorpej
9f85a4a798
Make sure bus mastering is enabled.
1999-03-23 23:18:50 +00:00
mycroft
cfe7413adb
Make 48KHz output work.
1999-03-22 07:58:55 +00:00
mycroft
f60907c286
Regen.
1999-03-19 06:40:11 +00:00
mycroft
4e92fb2fd1
Add AudioPCI 97 (a.k.a. Creative Ensoniq AudioPCI).
1999-03-19 06:39:32 +00:00
cgd
ff42ff62e8
pull pci_machdep.h in from machine/
1999-03-19 03:37:52 +00:00
thorpej
1954300d6c
Regen.
1999-03-17 19:21:49 +00:00
thorpej
0d433f490b
Add Silicon Integrated Systems SiS900 10/100 Ethernet.
1999-03-17 19:20:51 +00:00
mjacob
d596b20f1e
prototype 1080/1240 support
1999-03-17 06:16:42 +00:00
mjacob
e380eb62d5
Tron whacked my you-know-what because I didn't follow procedure.
...
So I insered his description of the 'procedure' in the most likely
place a developer will find it.
1999-03-16 22:41:56 +00:00
tron
ddbc34d638
Regen from "pcidevs".
1999-03-16 22:32:58 +00:00
mjacob
f50c9fa8ea
add Qlogic 1080 && 1240 product IDs
1999-03-16 21:24:46 +00:00
sakamoto
23903bfc0e
Regen.
1999-03-11 05:17:54 +00:00
sakamoto
272f5b609d
Add several VIA Technologies chipsets.
1999-03-11 05:17:24 +00:00
drochner
5704ad4969
regen
1999-03-09 11:48:59 +00:00
drochner
2987883f07
add 2 ISDN cards, from Martin Husemann per PR kern/7110
1999-03-09 11:48:03 +00:00
explorer
3ebb419571
Update to slightly altered rnd_attach_source() api
1999-02-28 17:08:05 +00:00
dante
ceef7fa3d7
Fix AdvanSys Narrow driver to work on Alpha
1999-02-25 20:20:30 +00:00
bouyer
71036465a5
In cy693_setup_channel(), setup timings for IOR too (they were left to 0,
...
which is a way too higth timing for some devices). Thanks to Ken Wellsch
for trying the multiple debug kernels until the problem was located.
1999-02-22 10:12:00 +00:00
ross
ea05c3b739
Fix typo.
1999-02-20 07:07:07 +00:00
thorpej
598b05da47
Regen.
1999-02-19 19:12:09 +00:00
thorpej
d9c29083d4
Improve descriptions for DEC Ethernet chips.
1999-02-19 19:11:33 +00:00
thorpej
3f8a09bba4
Improve product descriptions, and add 3c905-FX and 3c980 Server Adapter
...
products.
1999-02-19 06:58:42 +00:00
thorpej
7248c3be19
Improve card descriptions.
1999-02-19 06:57:56 +00:00
thorpej
02df2bd5a5
Regen.
1999-02-19 06:56:53 +00:00
thorpej
1128dd593e
Improve the descriptions of 3Com Ethernet cards, and add the 3c905B-FX
...
and 3c980 Server Adapter products.
1999-02-19 06:55:15 +00:00
thorpej
3a63b5db2a
Regen.
1999-02-19 05:53:36 +00:00
thorpej
f43c45889a
Add several Tulip clone chips.
1999-02-19 05:53:00 +00:00
mycroft
bd4cd051b9
This is an utterly revolting hack to work around the previously mentioned
...
lossage. On the Alpha, we force the buffers to be allocated through the SGMAP
so that the PCI bus addresses are low enough.
At least it's only one line of code...
1999-02-19 02:27:59 +00:00
thorpej
a473ed5477
Fix omission in previous.
1999-02-18 19:24:39 +00:00
mycroft
699a815751
Pass the correct address (PCI bus address, not PA) to the card.
...
Also fix some typos and add more debugging printf()s.
This would work on the Alpha, but the card I have appears to have the upper
address bits chopped off, and the ring buffer gets mapped using the DGMAP,
which uses the upper bits. Boom.
1999-02-18 09:22:17 +00:00
mycroft
e0b748e50c
Pass the correct address (PCI bus address, not PA) to the card.
...
Works on an Alpha now.
1999-02-18 07:59:30 +00:00
mycroft
c02bf3c4d7
Minor code munging.
1999-02-18 05:46:38 +00:00
thorpej
982603ce5b
Don't reset the interface when the media changes.
1999-02-18 01:24:29 +00:00
thorpej
78e18b8d8c
Back out to the previous stable revision of the fxp driver. The latest
...
one had too many stability problems.
1999-02-18 01:23:41 +00:00
mycroft
6ce15ae4e3
spaces -> tabs
1999-02-18 00:55:36 +00:00
mycroft
f1e84a4ec5
A few things:
...
* Use the trigger interface.
* Permit different encodings for record and playback.
* Set AUDIO_PROP_INDEPENDENT.
* Fix the mmap(2) hole again.
* Use 16-bit mode for a-law and u-law playback.
1999-02-18 00:54:19 +00:00
mycroft
8b7b7cccc7
Fix a silly type.
1999-02-17 23:55:18 +00:00
mycroft
71105fbda7
Update comments.
1999-02-17 21:44:55 +00:00
mycroft
e5f5e628d2
Pass the direction to the allocm and round_buffersize methods.
...
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
bouyer
2ccd5cde74
Correctly compute PIO/DMA mode for sis and acer chips when the drive support
...
a DMA mode with higther capabilities than PIO mode.
1999-02-16 18:11:52 +00:00
hubertf
56f2d188fc
RCS ID police
1999-02-15 04:54:34 +00:00
tron
210b267f84
Regen from pcidevs.
1999-02-14 22:44:36 +00:00
tron
acb24b6080
Add 3Dfx's Voodoo II. Fixes PR kern/7000 by Brett Lymn.
1999-02-14 22:38:18 +00:00
thorpej
70b91539e9
Restructure the interrupt handler and 1-second timer a bit, and tidy up
...
the lazy-transmit-interrupt logic, fixing a few minor logic problems.
Now unable to reproduce the lockup problem described in PR #6767 . Changing
PR's state to "feedback".
1999-02-13 02:12:59 +00:00
thorpej
f83663b7ba
Garbage-collect some unneeded definitions.
1999-02-12 00:37:07 +00:00
thorpej
7b516b31bd
Major overhaul of the Rhine/Rhine-II driver, structuring it a little more
...
like the SMC83C100 EPIC/100 driver:
* Rather than using pointers to the head and tail of the transmit and
receive rings, use wrapping indexes into arrays. This is a little more
obvious when reading the code.
* More cleanly separate the hardware descriptor from the software descriptor.
* bus_dma it everywhere.
* Implement interrupt pacing and avoid a potential race in the transmit
loop.
Now this looks more or less like the Rhine driver I was working on when
this driver was committed :-) Update copyright notice to reflect that.
1999-02-12 00:36:48 +00:00
sakamoto
0b4e481612
add "mii" to vr driver.
1999-02-09 02:04:36 +00:00
mjacob
c47d6855db
clean up pci configuration a bit
1999-02-09 00:35:35 +00:00
cgd
6b77f11d67
put in better name/description for Simon G's board
1999-02-06 06:55:15 +00:00
cgd
04046c6dd7
add code to cope with multiple ports per BAR, as are found, for instance,
...
on the 8 port card Simon Gerraty has. In general, cards which have
this lots of ports also have a separate interrupt status register, but
this change is just to talk to the various ports independently. It works,
but it's not optimal. (XXX still need a good name for the card in the
comments, and to update the manual page.)
1999-02-06 06:29:54 +00:00
thorpej
23382bdfcb
Regen.
1999-02-05 22:55:40 +00:00
thorpej
0955479f29
Add some Olicom Ethernet device IDs, from FreeBSD's tl driver.
1999-02-05 22:55:19 +00:00
thorpej
d95d5b1488
Make this driver work on the Alpha. Apparently the receive DMA mechanism
...
has the same 4-byte alignment requirement that the transmit side does. This
causes the packet payload to be misaligned. So, on systems which require
strict alignment, we must copy the incoming frame to a new packet buffer,
suitably aligned.
1999-02-05 22:09:46 +00:00
thorpej
b52d1e44d0
Fix the interrupt handler to actually acknowledge the interupt to the
...
dispatch code (!!!). How did this work even on the i386 before?
1999-02-05 21:20:31 +00:00
thorpej
dde3694c4c
Fix some formatting nits.
1999-02-05 08:42:03 +00:00
thorpej
82a54250be
Remove some duplicate softc members, and comment some of the softc
...
fields.
1999-02-05 08:27:46 +00:00
thorpej
8bf66d3eb2
Remove some unnecessary splnet's.
1999-02-05 08:21:31 +00:00
thorpej
50faf19d7d
splimp -> splnet
1999-02-05 07:53:24 +00:00
thorpej
adc9c40688
Use the generic MII support code, not our own.
1999-02-05 02:58:38 +00:00
thorpej
ebf3a97519
Use MII command opcodes from <sys/dev/mii.h>
1999-02-05 01:17:24 +00:00
thorpej
909b90d2d4
Rename VR_MIICMD_DATAIN and VR_MIICMD_DATAOUT to actually match what the
...
data sheet says. (The names and their usage were exactly reversed in the
code.)
1999-02-05 01:10:30 +00:00
bouyer
5888b4354e
channel_map is called before setup_chip, so whe need to enable the channel
...
status bits in acer_channel_map().
1999-02-02 17:06:05 +00:00
bouyer
ca240ca7b5
Support for Acerlab M5229 IDE controller. Thanks to Thilo Manske for testing
...
the code, and to Takahiro Kambe who run several tests and finally found the
bug by himself :)
1999-02-02 16:13:59 +00:00
thorpej
05cbb33e4c
Use pcidevs.h to get vendor and product IDs.
1999-02-02 00:32:21 +00:00
thorpej
b6a84f08e8
Take software-only structure definitions out of the register description
...
header.
1999-02-02 00:29:17 +00:00
thorpej
bb5edf7345
Remove support for FreeBSD from the driver; so many changes are going
...
to be required to make it properly portable to all of NetBSD's platforms,
that it just wouldn't be worth the effort.
1999-02-02 00:05:02 +00:00
thorpej
2bdfbafc37
Minimal changes to make this compile on the Alpha. Much more work is
...
needed to make this a truly portable driver.
1999-02-01 23:40:22 +00:00
mjacob
1ece20c808
roll internal release tag
1999-01-30 07:08:04 +00:00
augustss
d6c1a3e198
Regen.
1999-01-28 04:34:31 +00:00
augustss
864e74c18d
Add S3 86C365 Trio3D.
1999-01-28 04:31:33 +00:00
sakamoto
fd094d79ee
NetBSD RCS id.
1999-01-26 06:31:28 +00:00
sakamoto
57d82cd1f3
Change bootverbose 1 to 0.
...
Add vr_lookup.
1999-01-22 05:34:36 +00:00
sakamoto
02bb7a4233
Add VIA Rhine/Rhine II Fast Ethernet files.
1999-01-21 12:02:00 +00:00
sakamoto
4f99746d57
Add NetBSD autoconfiguration support.
...
KNF.
1999-01-21 12:00:25 +00:00
sakamoto
bea8f807a7
Import FreeBSD's VIA Rhine fast ethernet PCI NIC driver
...
written by Bill Paul <wpaul@ctr.columbia.edu>.
1999-01-21 11:55:22 +00:00
drochner
76db984c6d
regen
1999-01-16 11:28:19 +00:00
drochner
1587097426
add another NCR chip, from Dave Sainty <dave@dtsp.co.nz> per PR kern/6819
1999-01-16 11:27:40 +00:00
tron
edd69ba694
Because memory mapped access doesn't fail only with the docking station
...
for the TI TravelMate 5000 but also with at least one Compaq NIC we
prefer I/O mapped access again. Fixes PR kern/6690.
1999-01-11 22:45:41 +00:00
thorpej
67e9d2a3bf
Fix a few glitches in the nwscons tga driver, PR #6655 , Brett Slager.
1999-01-11 22:11:36 +00:00
drochner
1eba733d91
remove dummy "load_font" entries
1999-01-11 21:35:54 +00:00
mjacob
4401c8bdd7
oops. Forgot to turn on PCI burst.
1999-01-10 03:41:47 +00:00
thorpej
c35b8b591b
One more cosmetic change, from Izumi Tsutsui.
1999-01-08 19:55:17 +00:00
augustss
0d32a9a78b
Fix more `void *' arithmetic.
1999-01-08 19:22:34 +00:00
thorpej
3dc31bab2f
Device declaration for the PCscsi-PCI SCSI chip driver.
1999-01-06 23:25:53 +00:00
thorpej
671d0ae88d
Device driver for the AMD Am53c974 PCscsi-PCI SCSI chip (i.e. the chip used
...
on the Tekram DC-390 SCSI cards), from Izumi Tsutsui, PR#6654. Minor
cosmetic changes by me.
1999-01-06 23:23:33 +00:00
hwr
446f262aa5
Regen
1998-12-30 13:50:42 +00:00
hwr
4d3847e0ea
Add NeoMagic MagicGraph 128ZV graphic chip.
1998-12-30 13:49:49 +00:00
mjacob
8ac99457db
I mean *really* clean up headers
1998-12-28 19:12:04 +00:00
mjacob
b51e3fbf3c
clean up headers; remove early revision 2100 workarounds
1998-12-28 19:11:32 +00:00
augustss
da39a16267
Fold lines to 80 chars.
1998-12-27 13:03:58 +00:00
drochner
71fa656b19
use a symbolic definition for the PCI subsystem ID
1998-12-21 20:56:06 +00:00
drochner
c896b644ba
use a symbolic definition for the PCI subsystem ID
1998-12-21 20:40:01 +00:00
drochner
ac7ba300c0
add two of the newer register definitions
1998-12-21 20:31:54 +00:00
drochner
45b5108fb1
regen
1998-12-21 13:43:11 +00:00
drochner
70a2fcddc2
change name of 82443BX according to Intel's data sheet
...
correct "no AGP" case to real topology of the chip
clarification: s/AGP Device/AGP Interface/
1998-12-21 13:37:00 +00:00
nathanw
788ff053de
Fix up support for PCI attachments of pcic devices on i386 in general,
...
and the Cirrus Logic CL-PD6729 in particular.
From danw@mit.edu in PR port-i386/6436.
1998-12-20 17:53:28 +00:00
drochner
2e81b6b5f8
regen
1998-12-20 16:06:25 +00:00
drochner
6eb0418fdb
add a Zoran multimedia controller chip
1998-12-20 16:05:32 +00:00
thorpej
d15dc38fd9
Changes from FreeBSD:
...
Implemented a more sophisticated mechanism for handling transmitter
interrupts which now defers them until the transmit queue if filled
up with completed buffers. This has two advantages: first, it reduces
the number of transmitter interrupts to just 1/120th of the rate
that they occured previously, and two, running down many buffers
at once has much improved cache effects.
Defer rundown (m_freem) of completed transmit buffers for no longer
than 1 second.
This brings us up-to-date with the most recent "fxp" driver in FreeBSD.
1998-12-19 01:14:37 +00:00
thorpej
30f21adec4
Regen.
1998-12-18 21:08:37 +00:00
thorpej
6779120f4a
Add product ID for the Yamaha 724 Audio device. PR #6605 , Dave Sainty.
1998-12-18 21:08:19 +00:00
explorer
9595b984ec
teach fxp about rnd_*()
1998-12-17 23:25:29 +00:00
msaitoh
2d5b32dd03
fix an invalid panic message.
1998-12-17 17:45:08 +00:00
bouyer
f1addbd3fd
Defer mapping of pci interrupt to pciide_mapregs_native(). This way,
...
the native interrupt shouldn't be mapped if a channel is in native mode,
but disabled.
1998-12-16 13:21:26 +00:00
bouyer
2093338697
Rearange the modes setup to allow these to be dyanmically changed. Fill
...
in the new "set_mode" callback.
1998-12-16 12:48:45 +00:00
thorpej
b33907f299
Don't DMA the scsi command from or the sense data to the scsipi_xfer
...
directly. That would require that we map the scsipi_xfer into DMA
space. Instead, copy to/from the NCR CCB, which the script already
has to DMA to/from. These copies are small, and don't seem to affect
performance.
1998-12-13 00:11:37 +00:00
thorpej
178fc3cc05
Step 3:
...
Use DMA maps for the actual data transfers.
1998-12-12 23:41:56 +00:00
thorpej
3cc30b3641
Step two:
...
Use DMA-safe memory for the script instances. The most important thing
here is that is guarantees that the script is contiguous in DMA space.
1998-12-12 00:19:13 +00:00
thorpej
086b4b0bf1
Step one of bus_dma'ing the PCI NCR driver:
...
Separate the ncb (i.e. softc) members that are accessed by the script into
a separate structure. Allocate one of these structures in DMA safe memory
using bus_dma, and change RELOC_SOFTC to use the DMA address of this
structure.
1998-12-11 23:21:11 +00:00
augustss
b94cb7b768
Add a driver for the S3 SonicVibes chip. From OpenBSD and
...
Constantine Paul Sapuntzakis (csapuntz@cvs.openbsd.org ) with
some changes by me.
XXX The driver still needs work.
1998-12-10 18:47:18 +00:00
thorpej
93e17878d1
Regen.
1998-12-09 23:57:58 +00:00
thorpej
02d7f1236c
Some more touchup on the VIA Rhine chip model number, and so some
...
sorting.
1998-12-09 23:57:35 +00:00
mjacob
74bc9f26d5
Update HBAs to incorporate the new max_lun property.
1998-12-05 19:43:33 +00:00
matt
3f225e009d
Add Sigma Designs REALmagic Hollywood Plus MPEG-2 decoder
1998-12-05 19:02:14 +00:00
drochner
9175cc0ddf
The chipset manual doesn't tell the truth about the channel enable
...
register bits. Replace by experimental result.
1998-12-04 17:30:55 +00:00
bouyer
47ab212504
Rename pio_mode, etc ... to PIO_cap, etc ... for consistency with the
...
ata_drive_datas struct. Suggested by Soren S. Jorvan.
1998-12-03 18:24:30 +00:00
bouyer
334abc06cf
Correct definition for SIS_TIM_UDMA_EN macro. Ultra-DMA should now work ...
1998-12-03 17:29:01 +00:00
bouyer
e39a5bdc53
Now that vtophy() is no longuer used, re-enable WDCDEBUG, with
...
wdcdebug_pciide_mask = 0 (so that one can easily patch this variable and give
me more informations :)
1998-12-03 17:27:57 +00:00
bouyer
2b28c858d8
add a udma_mode field to wdc_softc, and use it the same way dma_mode is used
...
(higthest ultra-dma mode supported). There may be a higther ultra-dma mode
defined ...
1998-12-03 15:38:59 +00:00
bouyer
ba90b4b2d3
Add URLs of documentation source (from Matthias Drochner).
1998-12-03 14:06:16 +00:00
bouyer
7d87d6a5f6
Use correct register when disabling the second channel.
1998-12-03 13:50:38 +00:00
bouyer
8ef785add8
Restore changes from revision 1.17:
...
"If a channel has no drives, do *not* unmap its I/O regions.
It's not really safe to use them for anything else, and in legacy mode it
will just cause us to probe the channel again as an ISA device."
1998-12-03 13:30:00 +00:00
bouyer
1af63c0605
Correct a few bogons in the SiS chip initialisation.
1998-12-03 13:25:44 +00:00
bouyer
09408781c9
Ouh ! Correct the 8-bit PCI registers reading/writing functions: need to
...
multiply the register offset by 8.
1998-12-03 13:24:11 +00:00
bouyer
45675ab14b
- change drive_flags from u_int8_t to u_int16_t
...
- keep the modes supported by the drive in struct ata_drive_datas (will be
later used for downgrading the DMA/PIO mode on error)
- use config flags to force/disable PIO/DMA/UDMA modes
- For the CMD PCI0643/6 setup DMA mode to DMA Read multiple.
1998-12-02 10:52:24 +00:00
jtk
aeec8f4cb2
regen
1998-11-30 19:47:53 +00:00
jtk
cef29c6e94
Per PR/6172 (Johnny Lam, lamj@stat.cmu.edu), fix pcidevs identification
...
of CL-PD6729. See <http://www.cirrus.com/products/overviews/pd6729.html >.
1998-11-30 19:47:16 +00:00
thorpej
2407a4bd22
Regen.
1998-11-29 02:00:33 +00:00
thorpej
feb6a5652f
Fix the original Rhine's part number (thanks to Greg Oster).
1998-11-29 02:00:13 +00:00
thorpej
17ac4ec4c5
Regen.
1998-11-29 01:54:16 +00:00
thorpej
f051479ec7
Garbage-collect some bogus RealTek entries.
1998-11-29 01:54:02 +00:00
thorpej
ecaece3f26
Add product IDs for the VIA Rhine and Rhine-II 10/100 Ethernet chips.
...
(XXX What is the original Rhine's part number?!)
1998-11-29 01:53:33 +00:00
drochner
b0bb754f03
regen
1998-11-27 10:43:52 +00:00
drochner
d5a92a68de
add Powerstorm 4D50T graphics found in some Alphas
1998-11-27 10:39:16 +00:00
mcr
dcfd79f257
regenerated pcidevs.h and pcidevs_data.h due to kern/6280
...
(not kern/5847 as originally noted)
1998-11-26 20:05:38 +00:00
augustss
ca707fcdf2
Make the copyright header conform to the NetBSD template.
1998-11-25 22:32:04 +00:00
augustss
9726cfd1fb
Make the copyright header conform to the NetBSD template.
1998-11-25 22:17:06 +00:00
bouyer
cc6a0ef02b
Use bus_dma(9) for the DMA ops in fxp_init() too. Without this the driver
...
was stuck in the while (!(cbp->cb_status & FXP_CB_STATUS_C)); loop,
I think because the relevent CPU cache entry was never updated.
This was on a compaq deskpro system.
1998-11-25 17:19:09 +00:00
drochner
5888c5ef44
a small optimization for the compat interrupt handling, possible after
...
channel_softc is within pciide_channel
1998-11-24 19:54:20 +00:00
mcr
4cb534cca1
added 82443BX_AGP_NOT as per kern/5847
1998-11-23 22:54:02 +00:00
drochner
152d52c171
headers for new hardware support in pciide.c. from Manuel.
1998-11-21 16:06:45 +00:00
drochner
9effbbe436
some restructuring, more or less to get support for weird IDE controllers,
...
eg the Cypress ISA bridge:
-put channel mapping into the chip specific part, unify with
channel_probe() into channel_map()
-use pointer to channel data as function call argument wherever possible
instead of the channel number
-allow the "compat" channel number to differ from the per-controller
channel number - for mapping and interrupt functions
-add support for SiS5598 and Cypress 82C693 chips
Mostly done by Manuel, I only contributed to the first 2 items.
1998-11-21 15:55:31 +00:00
thorpej
3b068a6c78
Adapt to the new scsipi_adapter interface.
1998-11-19 21:53:32 +00:00
mrg
db3051d720
fix problems in many d_mmap routines:
...
- returned EOPNOTSUPP rather than -1.
- no check for negative offset.
many of these fix potential security problems in these drivers.
XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
paddr_t (*d_mmap) __P((dev_t, off_t, int));
by someone!
1998-11-19 15:38:20 +00:00
mycroft
cb703f0332
If a channel has no drives, do *not* unmap its I/O regions.
...
It's not really safe to use them for anything else, and in legacy mode it
will just cause us to probe the channel again as an ISA device.
1998-11-17 17:59:14 +00:00
bouyer
56107b8e10
Force PCI_COMMAND_MASTER_ENABLE if DMA has been setup properly. The BIOS is
...
supposed to do it but who knows ...
1998-11-12 15:05:29 +00:00
bouyer
1e71e76d6c
- clearify the boot messages (features supported vs features used). Thanks to
...
Havard Eidnes for his complains about this :)
- fix some typo in comments
- hoppefully better detection of drives reporting bogus PIO modes.
1998-11-11 19:38:27 +00:00
thorpej
1a5d2ce537
File is obsolete.
1998-11-10 05:56:31 +00:00
matt
1b8620b9fb
Cleanup media set on Alpha. ring txpoll after setting proper tx
...
interrupt mask.
1998-11-09 23:41:14 +00:00
thorpej
a1b2be7e1d
Const poisoning.
1998-11-09 23:12:48 +00:00
thorpej
9f20ff377a
Make the device lookup table-driven, like if_ep_pci.c.
1998-11-09 23:12:18 +00:00
bouyer
432a301fc6
Support for the CMD PCI064{3,6}. Tested on a 0646 with a
...
"wd0: PIO mode 4, DMA mode 2, UDMA mode 2" device.
1998-11-09 09:21:09 +00:00
fvdl
d878e9efc8
Rely on priority match to resolve conflict with the ex driver, not on
...
a define.
1998-11-07 23:06:26 +00:00
drochner
f213d2f96a
use common code for extended capability (power management)
...
let "match" return 2 (> ep_pci)
1998-11-07 16:53:19 +00:00
drochner
bbe9d71415
add support for "extended capabilities" (new in PCI spec 2.2)
1998-11-07 16:47:22 +00:00
fvdl
7b10c3e7e4
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
...
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
thorpej
7fe67ebc21
Add support for the Seeq 80c24 AutoDUPLEX media interface which was nuked
...
when this driver was changed to use the MAC-independent MII code. This
"PHY" does not have a programming interface, but simply senses the duplex
mode from the link partner. Since it is not possible to read the 80c24
to determine the link type or status, we consider this to be "manual".
1998-11-03 05:47:38 +00:00
thorpej
cbcaaa3bc3
Make sure that a delay loop actually has some delay in it, and use IFF_OACTIVE
...
as appropriate.
1998-11-03 05:04:49 +00:00
thorpej
7d4ee06d3e
Use the rtl80x9 common code for media selection.
1998-10-31 00:45:48 +00:00
thorpej
992f2906ba
Move the RTL8029 register definitions to <dev/ic/rtl80x9reg.h>, and add
...
the registers/bits present in the RTL8019 (ISA version).
1998-10-31 00:27:41 +00:00
thorpej
de14bf4f80
Manuel confirms that defaulting to AUTO is ok, to Do It.
1998-10-30 23:30:16 +00:00
thorpej
04c995f517
Add support for media selection to the PCI front-end of the NE2000
...
driver. Currently supports:
RealTek 8029: 10base2, 10baseT, 10baseT-FDX, auto detect (but not FDX).
1998-10-28 00:15:54 +00:00
thorpej
a45667c4c3
Add register definitions for PCI NE2000-compatible extenstions, allowing
...
control over e.g. full-duplex mode, media, etc.
Currently, only extensions for the RealTek 8029 are defined.
1998-10-27 22:30:56 +00:00
thorpej
e5c050d79c
Cosmetic changes in product lookup, to match other drivers.
1998-10-27 19:49:37 +00:00
bouyer
31dec5ddc5
Add config flags for pciide: 0x001 forces the use of DMA when the driver
...
don't know how to set the controller's modes.
1998-10-22 15:11:39 +00:00
bouyer
1456b01d77
Fix for Apollo DMA mode (not UDMA): DMA mode = PIO mode - 2, not PIO mode + 2 !
1998-10-20 18:47:45 +00:00
thorpej
167e694c99
Regen.
1998-10-20 01:39:41 +00:00
thorpej
1715793000
Add RealTek 8129 and 8139 10/100Mb Ethernet IDs.
1998-10-20 01:38:57 +00:00
thorpej
f69c40b8be
Fix a memory leak in fxp_stop(), from the FreeBSD driver.
1998-10-19 23:51:15 +00:00
bouyer
22acea3cb7
Fix a comment.
1998-10-19 12:26:22 +00:00
bouyer
c90c4b829b
Add support for the second flavour of the VIA IDE chip (which has UDMA).
...
Don't claim DMA support if we don't have explicit support for this chip.
They're to may way to loose when trying to use DMA without configuring the
controller and disks.
1998-10-19 12:24:33 +00:00
bouyer
04bdcc421c
Regen.
1998-10-19 12:13:57 +00:00
bouyer
682ee5fdf3
Yet another attemp at getting the VIA tech. product name/ID's rigth.
...
It seems that different products have the same name (sigh).
1998-10-19 12:11:50 +00:00
bouyer
da5d0a6f17
pciide.c: don't define WDCDEBUG, so it compiles on alpha. Correct a bogon
...
in the printing of DMA mode (piix3/4 only)
others: set the debug_mask to 0, so that debug messages are turned off by
default but can be easily turned on.
Reset drive_flags to 0 for unconfigured devices, so that they are ignored
later. For configured devices, reset state to 0 after probe/attach.
1998-10-13 08:59:45 +00:00
bouyer
19fddaeeb5
Merge bouyer-ide
1998-10-12 16:09:10 +00:00
thorpej
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
tron
29c8a3aa85
Regen.
1998-10-05 20:38:17 +00:00
tron
1469dc411b
Correct vendor 0x1191 to "ACARD", add missing Matrox boards.
...
Fixes PR kern/6251 by Soren S. Jorvang.
1998-10-05 20:34:39 +00:00
tron
2aac65de87
Regen.
1998-10-04 23:52:43 +00:00
tron
a6a06368ce
Add S3 Virge/DX, fixes PR kern/6245 by Steve Allen.
1998-10-04 23:50:05 +00:00
fvdl
b28935cee3
Add missing field to le_softc structure, missed in previous commit. Name
...
it consistently with the other fields.
1998-10-02 00:20:52 +00:00
fvdl
5dbf12a22a
Regen.
1998-10-01 23:33:25 +00:00
fvdl
b7957e0200
Fix typo in 905BT4 product name.
1998-10-01 23:32:41 +00:00
drochner
a81796636f
support media selection / full duplex
1998-10-01 20:39:01 +00:00
matt
6e32aa4af4
Invert the RXCOPY test. Note that most new platforms will not
...
have relaxed alignment so the de driver should just work on them.
1998-09-29 22:40:52 +00:00
dante
b2a68e14db
Change sources to be KNF
1998-09-26 19:53:34 +00:00
dante
2cf169c563
Add AdvanSys ULTRA WIDE SCSI controllers
1998-09-26 16:20:31 +00:00
dante
b207a7d09d
Change product ADVSYS 2300 to ADVSYS WIDE
1998-09-26 16:16:23 +00:00
dante
da0a3e615e
Add support for AdvanSys Ultra Wide boards ABP-9xxUW
1998-09-26 16:09:32 +00:00
dante
4372d4402e
Remove Wide boards references
...
Update supported boards list
1998-09-26 15:52:55 +00:00
matt
1131320f18
Fix transmit underflow messages. (\0128 != \0 128)
1998-09-25 18:06:53 +00:00
mark
0c812cb0bc
Regenerate from pcidevs.
1998-09-22 23:00:44 +00:00
mark
de8340f7fd
Add ALI M1531 Host-PCI bridge.
...
Add Cirrus Logic CS4610 and CS4280 Audio chips.
Add Cirrus Logic CS4400 communications controller.
1998-09-22 22:59:02 +00:00
matt
d3e02fc461
Fix the accton support. Only set the board type it isn't an ISV.
1998-09-22 04:23:18 +00:00
mjacob
07bb8331e8
Roll back to 1.71 version- too many unexplainable problems with 1.72.
1998-09-21 14:53:58 +00:00
drochner
72fa4aec9b
regen
1998-09-18 10:51:15 +00:00
drochner
e630f429ab
Add PCI-VME interfaces: Tundra Universe and Bit3 2706
...
Note that Newbridge is now Tundra
Add Adaptec 7890 & Co.
1998-09-18 10:49:11 +00:00
mark
e9a20eaff4
Regen.
1998-09-18 04:30:52 +00:00
mark
0cf7fe7c62
Add yet another vendor ID for Fujitsu.
...
Add vendor ID for ESS Technology Inc.
Add product ID for ESS Technology ES1938 SOLO-1 AudioDrive
Add product ID for Fujitsu K56flex LTMODEM
Add product ID for TI PCI1250 PC Card bridge
Add product ID for Trident Cyber 9397 Video controller.
1998-09-18 04:30:10 +00:00
mjacob
6d8a22890e
dma setup now returns CMD_QUEUED or CMD_COMPLETE. Clarify a ternary
...
operation that needed some parentheses.
1998-09-17 23:10:20 +00:00
matt
e7be3f3601
Fix a problem where txput could "lose" dmamaps if it couldn't actually
...
place the packet into the ring for some reason.
1998-09-15 17:26:46 +00:00
matt
2633c65da5
This commit fixes two bugs in the de driver. The first is that the
...
descriptor count gets miscounted on txprobes. The second (and more
important) is that transmit stalls should now be fixed. The problem
was not due to lack of ring resources but dmamaps. When Jason changed
the driver to use pre-allocated maps (instead of the dynamic ones I
used), and when there were no more maps, the driver just gave up instead
of calling tx_intr to free any transmitted but unreclaimed dma maps.
Since there was nothing being transmitted, no transmit interrupts
would fire to restore things (and OACTIVE prevented other transmits
from happenning). So it stayed starved until another interrupt cause
(like a received packet) "woke" it up.
1998-09-15 02:39:03 +00:00
mjacob
52588e4fde
add more general probe to regular more operation stuff
1998-09-08 07:30:32 +00:00
mjacob
9b29429984
Remove clocks as common code now can determine what clock rates to use.
...
Remove other than 8 byte bursts- until we clarify whether or not buggy
PCI implementatiosn really cause problems.
1998-09-08 07:16:46 +00:00
veego
adebee9ad7
Regen.
1998-09-06 17:27:40 +00:00
veego
25eaf86126
Add the Brooktree 878 and 879 id's and fix the comment of the 849 entry.
1998-09-06 17:26:03 +00:00
drochner
b43e33a471
Since the RAMDAC drivers use the !=0-ness of fields for diagnostic
...
purposes, we have to zero-initialize the tga_devconfig structure.
1998-09-02 19:51:06 +00:00
dante
d35b531a68
Remove __BROKEN_INDIRECT_CONFIG
...
Correct currently known boards
1998-08-31 17:15:25 +00:00
dante
cb8b14827c
Adjust copyright justification
1998-08-29 13:54:50 +00:00
dante
17759893b0
Add rcs id
1998-08-29 13:44:49 +00:00
drochner
2f94f2c21c
some fixes:
...
-use of uninitialized variable in attach (mostly harmless)
-removal of dead code in attach()
-fix of interpretation of SIA blocks on >=21142 (serious, caused strange
things with 10Mbit)
1998-08-28 20:58:37 +00:00
drochner
a80cad6e0a
regen
1998-08-26 20:00:37 +00:00
drochner
fe1c5e2163
add the SIS 5597/5598 all-in-one PCI chipset
1998-08-26 19:59:16 +00:00
dante
d93a0d81b0
Add AdvanSys support
1998-08-26 14:20:37 +00:00
dante
97b8010151
Changed ADVSYSPROD to ADVSYS vendor ID
...
Added 1200A, 1200B, ULTRA, 2300 AdvanSys products ID
1998-08-26 14:18:26 +00:00
dante
d9e417cde9
Add AdvanSys 930U and 940U SCSI controllers
1998-08-26 14:13:58 +00:00
thorpej
daa8ad1747
Add some braces to make egcs happy.
1998-08-25 04:56:01 +00:00
thorpej
85c6c03e2a
Change the 32-bit fields of the RFA to an arrays of bytes, so that
...
egcs won't attempt to optimize inline copies of them into a single
load/store (the RFA is not 4-byte aligned in the DMA area).
Just use memcpy() to copy those fields, now, not our own home-grown.
1998-08-25 01:08:15 +00:00
matt
ea3bfd6d80
Fix bug in transmit logic that would transmits to stop. Boolean dyslexia
...
stricks again.
1998-08-24 14:09:15 +00:00
veego
ff2c3adddc
Add some braces to stop the new egcs warnings.
1998-08-20 19:55:06 +00:00
thorpej
8021b2ae29
Initial support for the Brooktree Bt463 RAMDAC.
1998-08-18 23:29:28 +00:00
thorpej
ff266f0937
Add some braces to make egcs happy.
1998-08-18 18:23:07 +00:00
thorpej
813dfd31c5
Fix a couple of obvious bugs in the hardware cursor handling code, and
...
use the RAMDAC callbacks to get/set the cursor colormap.
1998-08-18 08:40:39 +00:00
thorpej
6ba7f2f6fd
Need an entry point to check cursor colormap entries for validity
...
before actually setting them.
1998-08-18 08:23:46 +00:00
thorpej
3db6850bb7
When updating the cursor colormap, actually store the data in our
...
copy of the cursor colormap, not the regular colormap!
1998-08-18 08:22:49 +00:00
thorpej
feaf75c755
Add set_curcmap and get_curcmap RAMDAC methods, for use by the TGA hardware
...
cursor code. These are unneeded on the Bt485, since the RAMDAC handles
the hardware cursor. They are needed for the Bt463, however, since the
RAMDAC only provides cursor color.
1998-08-18 08:07:45 +00:00
thorpej
082116a927
vm_offset_t -> vaddr_t
1998-08-18 08:00:17 +00:00
augustss
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
thorpej
7ce9726a7d
Oops, don't forget to tick the MII once a second.
1998-08-15 17:04:52 +00:00
bouyer
1bbc572701
Fix typos in last commit.
1998-08-15 16:58:53 +00:00
bouyer
53d231dae3
correct indent.
1998-08-15 16:49:33 +00:00
mycroft
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
mycroft
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
mycroft
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
drochner
a8d0a43ffa
2 changes to pciide_probe_wdc() (used in compatibility mode to check
...
if i drive is responding):
-if the reset succeeds, check some registers to make sure there is really
a drive (and not a chipset which echoes back the last written value)
-explicitely select the master before trying to read the master's status
1998-08-14 20:35:40 +00:00
eeh
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
mycroft
a5ace63ee2
Associate the preamp with the mic volume in the input class.
1998-08-12 19:09:55 +00:00
mycroft
916c60de3e
Oops; fix typos.
1998-08-12 18:55:03 +00:00
thorpej
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
mycroft
a2f1d5b822
Add a knob to enable/disable the mic preamp.
1998-08-12 18:47:43 +00:00
mjacob
5ad5bb35af
minor change to make the message less linux like
1998-08-12 00:03:23 +00:00
thorpej
7b8168e675
Adapt to new MII code.
1998-08-11 00:12:52 +00:00
thorpej
d812ed6db7
G/c the 83840 register definitions.
1998-08-11 00:12:20 +00:00
thorpej
1301693108
Adapt to new MII code.
1998-08-11 00:11:39 +00:00
thorpej
b1fb3ecb0f
Adapt to the new MII code. This required splitting some structures into
...
if_tlvar.h, since the ThunderLAN PHY driver needs to know some things
about it's parent (and since it can only attach to a ThunderLAN chip,
this is the easiest way).
1998-08-11 00:09:26 +00:00
thorpej
36db6106a8
Adapt "tl" driver to the new MII code, and add the "mii" attribute to
...
the "fxp" driver.
1998-08-11 00:08:23 +00:00
ross
920e7c7d5d
Fix a race involving determination of pollmode. This is not known to be
...
associated with any observed lossage...it was just noticed while reading
ncr_start().
g/c some now-unreachable code produced by the earlier race condition fix.
1998-08-10 13:10:33 +00:00
mycroft
1c6dea16fa
For consistency, only do the rate coupling in full-duplex mode.
1998-08-10 01:27:34 +00:00
mycroft
cf7abcbe64
Minor cleanup to debugging cruft.
1998-08-09 22:11:48 +00:00
mycroft
4ffebebb25
Several things:
...
* Use the new trigger_{in,out}put interface.
* Allow the play and record channels to have different encodings (but the
same sample rate).
* Play u-law and a-law as 16-bit data. (This may not work yet...)
1998-08-09 20:32:34 +00:00
mycroft
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
ross
815f9f2445
1. Untangle preprocessor conditionals for sanity and {} balance
...
2. Fix a race between the first callout and the first non-polled ncr_start()
1998-08-08 00:14:08 +00:00
thorpej
9bb616c621
Regen.
1998-08-07 06:59:31 +00:00
thorpej
88c6239026
Add product IDs for the 3Com Cyclone-based PCI Ethernet devices,
...
the 3c90xB DMA-only cards.
1998-08-07 06:58:57 +00:00
thorpej
dcfe0e1506
Back out part of previous; it is perfectly reasonable, and desirable, to
...
print out debugging info ifdef DEBUG.
1998-07-31 02:14:40 +00:00
mjacob
bec14b0ce3
Part A (Cosmetic nonsense):
...
>We're not Linux. If we still want driver version strings to be displayed
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
Part B:
Field interrupts in OS layer so that (in this OS) bus_dmamap_sync(POSTREAD)
can (formally) ensure that the result queue is stable wrt to buffering
and that for sending a command a bus_dmamap_sync(PREWRITE) is done to
ensure that the device gets a good view of what the mailbox contents
should be.
1998-07-31 02:08:16 +00:00
thorpej
99b10d9e98
Regen.
1998-07-28 21:51:34 +00:00
thorpej
463fc03c76
Add the IMS TwinTurbo 128M graphics board.
1998-07-28 21:50:30 +00:00
tron
a79f26fe76
Regen from pcidevs.
1998-07-27 22:58:43 +00:00
tron
04affecc7a
"Brooktree Brooktree Bt848" -> "Brooktree Bt848"
1998-07-27 22:58:07 +00:00
tron
0d386417e9
Regen from pcidevs.
1998-07-27 21:37:17 +00:00
tron
d54ccbde1a
Add Brooktree Bt848 and BT849 video capture chips.
1998-07-27 21:34:11 +00:00
augustss
e8e8a975af
Regen.
1998-07-27 20:04:10 +00:00
augustss
6585f9ebc1
Add S3 SonicVibes.
1998-07-27 20:02:27 +00:00
explorer
ab207dc49d
add ntwo* at pci? function ?, a T1 network driver.
1998-07-26 03:28:28 +00:00
augustss
72de215752
Use PCI class/subclass/interface to match USB host controllers instead
...
of vendor/product id. This makes the probe find more controllers
without recompilation.
1998-07-25 23:23:01 +00:00
explorer
12f40f6481
commit this so it gets the right generated from tag
1998-07-25 23:12:16 +00:00
augustss
8bafec3cec
I forgot to commit these when usb_mem was added.
1998-07-25 15:15:39 +00:00
explorer
9043581b85
define RISCom and RISCom N2 product
1998-07-25 11:57:50 +00:00
drochner
4c50fd2165
regen
1998-07-22 17:43:11 +00:00
drochner
28f1e61164
add IDs for ACC Micro 2051 "PCI Single Chip Solution"
1998-07-22 17:41:04 +00:00
augustss
f190634e3d
Add an Acer labs USB controller.
1998-07-22 10:43:37 +00:00
drochner
68f2474820
adapt to LANCE driver split; let PCNET/PCI use the 32-bit mode
1998-07-21 17:30:26 +00:00
thorpej
d8e4026492
Oops, unused variable warning.
1998-07-20 21:17:30 +00:00
thorpej
74fc0579eb
We're not Linux. If we still want driver version strings to be displayed
...
at boot, then I suppose DEBUG is a reasonable compromise.
1998-07-20 21:16:52 +00:00
tron
334afaa14e
Regen from pcidevs.
1998-07-19 12:25:46 +00:00
tron
463e7e6dce
Fix product ID for Matrox Mystique, add NEC PowerVR PCX2.
1998-07-19 12:23:56 +00:00
mjacob
1aa702b8f8
fix bogus initialization
1998-07-18 21:04:22 +00:00
mjacob
99ff11f6b7
locking now out of main framework for isp_reset/isp_init
1998-07-18 21:02:06 +00:00
mjacob
afb0e1b693
no framework
1998-07-15 19:53:57 +00:00
mark
b34e933db8
Regen.
1998-07-13 03:29:48 +00:00
mark
22d5b20046
Add ID for ALI M1541 Host-PCI bridge.
1998-07-13 03:29:00 +00:00
augustss
deb00272b9
Add USB support. Supported so far:
...
* UHCI and OHCI host controllers on PCI
* Hubs
* HID devices withe special drivers for mouse and keyboard
* Printers
1998-07-12 19:51:55 +00:00
cgd
8f94f1a709
I went to Fry's and noticed a few more cards that probably will be
...
supportable with this driver, but currently aren't supported. Add them.
1998-07-12 02:21:56 +00:00
tron
67eb4c3488
Regen from pcidevs.
1998-07-10 20:41:36 +00:00
tron
763b848669
Add Intel's BX chipset, 3Dfx Interactive and their Voodoo board.
1998-07-10 20:40:06 +00:00
augustss
8af687b575
Add mixer output selection.
...
From gson@araneus.fi (Andreas Gustafsson)
1998-07-06 11:12:21 +00:00
jonathan
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
jonathan
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
augustss
2a91c2b84f
Regen.
1998-06-30 14:42:00 +00:00
augustss
bb9ccdf373
Add a 2 Micro CardBus controller.
1998-06-30 14:41:29 +00:00
drochner
91d0d98450
adapt to wsdisplay interface change
1998-06-26 21:07:03 +00:00