joda
4b45d02e15
regen
2000-01-24 15:50:16 +00:00
joda
a8308ddfd4
TI PCI2030 is a PCI-PCI bridge
2000-01-24 15:49:50 +00:00
tsubai
1ef6ee50b9
Regen.
2000-01-23 09:55:40 +00:00
tsubai
9aa167f517
Add Apple KeyLargo and UniNorth.
2000-01-23 09:54:28 +00:00
mycroft
901082bf1e
Remove code that should not have been added.
2000-01-23 04:02:19 +00:00
augustss
75e8c400fa
Add parens so a ?: expression binds correctly.
2000-01-23 00:10:03 +00:00
thorpej
dc59bc1db3
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:39:55 +00:00
ad
e716b4ba71
Fix register offset problem. This should make EISA boards work correctly,
...
and is also needed for the ISA frontend (some time this week).
2000-01-18 16:50:38 +00:00
bouyer
0016706a70
Clean up revision stuff for the sis. Suggested by Chris Cappuccio.
2000-01-18 13:58:07 +00:00
bouyer
a569e4a38f
Correct URLs.
2000-01-18 13:30:32 +00:00
cjs
762741c71d
Fix the size of the playback buffer. Patch from Dave Sainty <dave@dtsp.co.nz>.
2000-01-18 04:48:47 +00:00
joda
2367ad5f3d
add shutdown hook
2000-01-17 12:57:26 +00:00
bouyer
9156026f0f
From chris@openbsd.org:
...
"Don't enable UDMA modes for revisions of SiS 5513 < 0xd0
The only revisions I know which don't actually support UDMA are 0x09 and below..
But the only revision I know which does support UDMA is 0xd0 (and presumably
above that)"
2000-01-16 21:31:28 +00:00
matt
a9e57ac54d
Fixes for 21143 and MII in full-duplex mode.
2000-01-15 18:39:31 +00:00
augustss
a30f6c8ad9
Apply patches from Tatoku Ogaito (the author of the code).
2000-01-14 14:39:13 +00:00
tsutsui
7fcb8a3a8c
minor cosmetic
2000-01-14 13:20:17 +00:00
mycroft
1ee1632a02
Remove EX_CONF_MII for the 3c980. At least 2 people need this for the card
...
to work.
2000-01-13 23:26:35 +00:00
joda
87414deb1e
remove stale comment
2000-01-13 09:05:41 +00:00
joda
8430609055
(pccbb_pcmcia_do_mem_map): handle 8-bit memory
2000-01-13 09:01:17 +00:00
joda
e8937eb4e5
make this slightly more inline with other code; and while at it, fix
...
some oddities in pccbb_winset
2000-01-13 08:54:20 +00:00
joda
69034619d0
add %b strings for sockevent and sockstate registers
2000-01-13 08:46:46 +00:00
haya
27214a2c93
Add an entry for Toshiba ToPIC100 CardBus-PCI bridge.
...
Maintainance for 3Com multi-function, 16-bit pcmcia card.
2000-01-12 09:23:26 +00:00
haya
d978274ade
Regen.
2000-01-12 09:11:42 +00:00
haya
6a0979928c
Add an entry for Toshiba ToPIC100 CardBus-PCI bridge.
2000-01-12 09:08:36 +00:00
matt
3a0141108b
Regen.
2000-01-11 17:21:02 +00:00
matt
d8c0efec1b
Add CompuModules DVB receiver and transmitter boards.
2000-01-11 17:20:24 +00:00
soren
18bb5846c7
Regen.
2000-01-09 09:20:01 +00:00
soren
2c073c654d
Add MPC105.
2000-01-09 09:19:26 +00:00
ad
8f3fd0d6b3
Spelling.
2000-01-05 16:28:39 +00:00
drochner
6f64d1e85f
regen
2000-01-05 11:32:43 +00:00
drochner
2abcb85b5f
add some stuff which was mentioned on the mailing lists recently
2000-01-05 11:32:06 +00:00
chopps
a4d9bd9484
Add support for setting the clock and adapt the code to the new more
...
generic ic/hd56470.c core which now supports the isa version of the
same card.
2000-01-04 06:31:39 +00:00
hubertf
e9e9f381a1
Add an entry for the Trident Microsystems CYBER 9525
...
(as found in an Toshiba Satellite 2650 XDVD).
1999-12-31 00:12:41 +00:00
hubertf
ac50ee0e91
Add an entry for the Trident Microsystems CYBER 9525
...
(as found in an Toshiba Satellite 2650 XDVD).
1999-12-30 23:53:42 +00:00
kleink
1e9bb239a3
Off-by-one error in limiting the DMAC buffer size for Audio 2 to 64K (actually
...
64K - 1); from Dave Sainty in PR kern/9064.
1999-12-28 19:26:26 +00:00
kleink
f6655d0f7e
Fix a buffer KVA comparison botch in eso_mappage(); from Dave Sainty in
...
PR kern/9062.
1999-12-28 01:39:38 +00:00
soren
841d4966c3
Lower-case Bus-Master for consistency.
1999-12-26 21:46:23 +00:00
tsutsui
f1a6ac445d
Use htole32() and le32toh() instead of SCR_BO().
...
XXX Should we still keep non-NetBSD part?
1999-12-26 10:41:22 +00:00
haya
35a9d47da9
Maintanance for Ricoh RL5C475. VAIO 505TX uses this chip.
1999-12-20 08:11:42 +00:00
tsutsui
2f3ba68db9
Add more SCR_BO(). NCR53c875 now works on macppc.
...
XXX All SCR_BO() macros should be replaced with htole32() or le32toh().
1999-12-20 03:37:06 +00:00
mjacob
be6fe10ee6
get back to looking at config flags
1999-12-20 00:33:17 +00:00
tsutsui
7374a44f77
Use bswap32() as SCR_BO() macro to avoid unexpected side effects.
...
SCR_BO(*src++) caused some trouble.
1999-12-18 07:57:03 +00:00
drochner
5257d9712e
regen
1999-12-17 17:19:11 +00:00
drochner
289c969284
add Intel 450NX stuff
1999-12-17 17:18:48 +00:00
augustss
b7b9264da6
Regen.
1999-12-17 14:00:12 +00:00
augustss
78ba345df3
Change the Galileo entries so the generated code can be compiled.
1999-12-17 13:59:44 +00:00
soren
3017275313
Regen.
1999-12-17 01:04:47 +00:00
soren
fd4557865d
Fix comment.
1999-12-17 01:04:29 +00:00
soren
bf75bd8856
Regen.
1999-12-17 01:03:45 +00:00
soren
fdab32f446
Add Galileo Technology system controllers.
...
Remove obsolete ID database URL.
1999-12-17 01:02:03 +00:00
mjacob
edf809c8b6
Dual LVD (1280) support.
1999-12-16 05:35:42 +00:00
kleink
5dc4b19d4d
Report the Capability List support bit of the SR and, if set, print the
...
the Capability list pointer register as such as well as the capabilities
implemented in the list.
1999-12-15 12:27:26 +00:00
kleink
6a318fe223
Regen.
1999-12-15 11:55:35 +00:00
kleink
eec28e9605
* Add ESS Maestro2 product ID.
...
* Add TerraTec vendor ID.
1999-12-15 11:52:55 +00:00
augustss
3c1b8138f7
Add a device driver for the Cirrus Logic CS4280 sound chip.
...
The code has been contributed by Tatoku Ogaito.
1999-12-13 20:19:23 +00:00
tron
821c7a01f8
As suggested by Jason Thorpe back out revision 1.27 because it broke
...
PHY probing for the ThunderLan driver.
1999-12-12 17:55:21 +00:00
thorpej
014cd3fcc1
Take a stab at making this work on big-endian systems.
1999-12-12 17:46:36 +00:00
thorpej
afbb07a0e5
Use htole32() and le32toh().
1999-12-12 02:53:56 +00:00
thorpej
3716f21b7e
Use htole32().
1999-12-12 02:50:40 +00:00
thorpej
caae0e1aa1
- Don't try to run the chip in big-endian mode. Not all chips support
...
this consistently, and it doesn't always work even when the chip
supports it.
- Make sure things DMA'd to the chip that the chip interprets are in
little-endian mode.
1999-12-11 00:32:59 +00:00
kleink
c88b5146dc
Add support code to have the Hardware Volume Control interact with the
...
software mixer Master Volume state in a defined way by lazily updating the
latter if input from the former was processed.
1999-12-10 19:13:00 +00:00
kleink
6d1d09f757
Add a symbolic name for the ES1946 rev. E in this place, too.
1999-12-10 16:50:52 +00:00
thorpej
546480874c
After reading the 21143 manual again, make sure SNOOZE is cleared in
...
the CFDA register, too.
1999-12-07 07:36:19 +00:00
thorpej
747d454ffe
Add the PMCSR offset for the 21143, and make sure to bring the 21142
...
and 21143 out of sleep mode. From Masanori Kanaoka.
1999-12-07 07:32:58 +00:00
thorpej
f773270d0d
If, on the 21143, we find that we don't have an ISV SROM, try reading
...
it again, with 8 address bits. 21143 Pass 4.1 has a larger SROM,
for storing the CIS when used in a CardBus application.
1999-12-07 07:20:17 +00:00
drochner
0893832078
update for changed struct wsdisplay_accessops:show_screen signature.
...
no functional changes
1999-12-06 19:25:56 +00:00
thorpej
9eea13a674
Mark exactly 3 uses of the SCR_BO() macro as being bogus; these 3 uses
...
already involve byte swapping on big-endian systems due to bus_space_*().
However, the use is self-consistent, and the value is not interpreted
by the chip, so it probably does not matter. Leave them in for now; we
can always look at their removal later.
1999-12-05 19:40:18 +00:00
thorpej
8c1cbdbed5
Slight change to previous, to make it more obvious as to what's going on.
1999-12-05 19:33:13 +00:00
thorpej
d06db4b7da
I have the feeling that OpenBSD has never tried the 53c825a, 53c875, 53c875j,
...
53c885, 53c895, or 53c896 on big-endian systems.
1999-12-05 18:40:46 +00:00
thorpej
389c599f35
Changes from the OpenBSD `ncr' driver to byte-swap the script on big-endian
...
systems. Should make this go on e.g. the Apple Network Server.
1999-12-05 18:25:18 +00:00
ragge
6aabd4d0c2
CL* discarding.
1999-12-04 12:11:13 +00:00
castor
b8a6774e36
Add support for Lava Computers MFG 2sp-pci and quattro cards.
1999-12-04 05:43:44 +00:00
castor
165dc789fb
Regen
1999-12-04 05:43:02 +00:00
castor
fce37d6113
Add vendor ID for Lava Semiconductor ( http://www.lavalink.com )
1999-12-04 05:41:08 +00:00
thorpej
111b1dc2ee
Regen.
1999-12-04 04:41:40 +00:00
thorpej
ddbe03436b
Add some of the Compaq RAID controller IDs.
1999-12-04 04:40:57 +00:00
mjacob
e5835e36c3
request/response queues now indexed via u_int16_t. Add back in f/w inclusion
...
and clean up it's compilation. get chip rev out of pci header.
1999-12-04 02:54:54 +00:00
kleink
eab9ce05b7
A PCI Revision ID of 0x02 is what ESS happens to be calling ES1946 Revision E.
1999-12-03 22:34:28 +00:00
drochner
229f631a84
regen
1999-12-01 15:08:17 +00:00
drochner
1657f687be
add Cyclades 4Y and 8Y
1999-12-01 15:07:44 +00:00
drochner
a7ee57948b
-support 3c905B-COMBO - somewhat preliminary: the chip has both an internal
...
MII PHY capable of NWAY (according to the Linux driver) and plain BNC/
transceiver connectors. The shared code can't handle this yet, so leave
out MII/NWAY for now.
-print out revision number from PCI config header, this has been useful to
identify buggy chips
1999-11-30 19:16:51 +00:00
drochner
9faac4111e
regen
1999-11-30 19:10:38 +00:00
drochner
b5db34e4d5
add 3c905B-COMBO
1999-11-30 19:09:54 +00:00
bouyer
0c3ecf8e5e
Improve Ultra/66 support now that I've got some docs from Promise.
1999-11-28 20:05:18 +00:00
augustss
7b92ed07bd
Propagate the USB revision number to the usb driver.
1999-11-20 00:57:08 +00:00
thorpej
7479d29f00
Make the ThunderLAN and VIA Rhine drivers use the common MII bit-bang module.
1999-11-19 18:27:18 +00:00
thorpej
9ed17102f4
- Use the common MII bit-bang module.
...
- Add support other than 128-byte SROMs.
- Add support for the 21142/21143 MII.
1999-11-19 18:22:42 +00:00
augustss
ef8e85f177
Regen.
1999-11-17 00:09:48 +00:00
augustss
62058f9f6b
Add the SBLive! joystick device.
1999-11-17 00:09:17 +00:00
jun
a525b9a12a
Commit patch kern/8778
...
Subject: NEC PCI modem support
1999-11-16 03:15:17 +00:00
enami
7463c844a0
Make this file compile again; terminate the continuation line with backslash.
1999-11-16 02:13:02 +00:00
thorpej
a49d3ecb33
Add a macro to generate a class code given class, subclass, and interface.
...
From UCHIYAMA Yasushi's PCI BIOS patches.
1999-11-15 23:41:10 +00:00
joda
5527afff97
(pccbb_pci_callback): no point in reading the bus number register
...
twice
1999-11-15 16:19:03 +00:00
soren
748b241afb
Export softc.
1999-11-13 13:40:28 +00:00
thorpej
4bdf6bd731
Call mii_down() as appropriate.
1999-11-12 18:14:17 +00:00
is
1c37111492
Identification of DOMEX PCI-SCSI board, by Thilo Manske, PR 8772.
1999-11-12 12:03:32 +00:00
cgd
b4560adaf2
regen
1999-11-07 07:03:08 +00:00
cgd
7867af6cfb
back out rev 1.166:
...
(1) the list added isnt' complete and i'd call it incorrect. (There are
other devices with these names, where were omitted. I've never seen
the devices with these IDs, I _have_ seen the other devices that go
by these names.)
(2) the PR (8754) had not been updated to note that the problem was
fixed, and i'd preiously asked the submitter for more information and/or
a corrected list.
1999-11-07 06:59:46 +00:00
rh
b2a56ee1b9
regen.
1999-11-06 13:50:02 +00:00
rh
080ff79d14
Add vendor/product entry for Auravision VxP524 PCI Video Processor.
1999-11-06 13:48:29 +00:00
augustss
34e97b4c65
Regen.
1999-11-06 11:18:00 +00:00
augustss
3514a2e115
Add SIIG devices. Closes PR kern/8754 from Andreas Wrede <andreas@planix.com>
1999-11-06 11:17:30 +00:00
thorpej
4a09180976
Don't pass rd/mult capability though a PCI-PCI bridge. The bridge would
...
have to break it up into mutliple rd/line's anyhow, so why bother letting
the device issue it in the first place.
1999-11-04 19:04:04 +00:00
thorpej
110ac27449
Make sure devices are told they can use rd/line, rd/mult, and wr/inval.
1999-11-04 19:03:00 +00:00
tsarna
c0b20561f7
regen
1999-11-04 16:18:41 +00:00
tsarna
9df6f09e30
Add Aureal AU8820
1999-11-04 16:02:20 +00:00
augustss
fb580e3f6e
Regen.
1999-11-04 10:34:40 +00:00
augustss
1289659618
Add SBLive!
1999-11-04 10:34:03 +00:00
joda
c8532c3ebe
regen
1999-11-04 09:39:17 +00:00
joda
dbfcb792e1
add Xircom X3201-3 Fast Ethernet Controller
1999-11-04 09:38:38 +00:00
thorpej
e3f20e8ff1
Use Memory Read Line and Memory Read Multiple on the 21140, 21140A,
...
21142, and 21143, if the PCI bus says its okay.
1999-11-04 01:20:55 +00:00
thorpej
a4e1bde0b3
Print out if the read {line,multiple} and write/invalidate commands are
...
okay to use.
1999-11-04 01:03:34 +00:00
thorpej
ca9b9a3b2e
Adapt to mii_phy_probe() change.
1999-11-04 00:24:00 +00:00
mycroft
4f1f2c6398
Fix silly error that caused the secondary channel to be ignored if the primary
...
channel was disabled.
1999-11-03 14:54:07 +00:00
augustss
361b083d4c
Shorten some delay()s. From WITEK Wnuk <witek@atari.org>
1999-11-02 17:48:01 +00:00
kleink
b536890c88
Add a mixer control for the Master Volume Mute knob.
1999-11-02 12:11:42 +00:00
augustss
72a864f78c
Add the midibus attribute to the fms driver.
1999-11-02 11:58:06 +00:00
soren
09c41837ce
Fix crash when both 1370 and 1371/1373 devices are configured.
...
Update documentation links.
XXX The initial volume of the 1371 mixers is set to 255. Should be ~200.
1999-11-02 05:40:59 +00:00
thorpej
c8852145bc
Get fms MPU and OPL module inclusion right.
1999-11-02 00:29:20 +00:00
augustss
3c40153ea9
Fold some long lines and make it compile with the new auconv functions.
1999-11-01 23:26:58 +00:00
augustss
7c8206c662
Add a missing file for the fms driver.
1999-11-01 21:54:12 +00:00
augustss
8cd393778b
Regen.
1999-11-01 20:43:51 +00:00
augustss
684aa0605c
Add FM801 audio device driver. From Witold J. Wnuk ww181302@zodiac.mimuw.edu.pl
...
Closes PR kern/8729.
1999-11-01 20:43:12 +00:00
augustss
860ebb7a92
Make little endian and big endian version of all functions
...
that deal with 16 bit samples. Let the drivers decide which ones
to use.
1999-11-01 18:12:19 +00:00
haya
8553661a5e
Maintainance the name of Ricoh PCI-CardBus bridges.
1999-11-01 08:58:45 +00:00
augustss
6346873ea6
Use the right attribute for attaching USB controllers.
...
From MAEKAWA Masahide <bishop@rr.iij4u.or.jp>
1999-10-30 17:03:30 +00:00
sommerfeld
db05febdfa
Add enable/disable support and EEPROM size selection, prerequisites
...
for getting the cardbus fxp attachment to work.
Tested on the built-in 82559 in a VAIO Z505S.
From Johan Danielsson / PR8631; changed slightly to KNF.
1999-10-30 16:07:58 +00:00
augustss
3d0e8ae9dd
Make this file compile again by using the same names as in pcidevs.
1999-10-30 16:02:28 +00:00
augustss
a498fbea5f
Add midibus attribute for eap.
1999-10-30 14:11:16 +00:00
augustss
613db45d20
Add MIDI support.
...
Closes PR 8578.
1999-10-29 23:03:18 +00:00
matt
471ab17680
Regen.
1999-10-29 21:31:30 +00:00
matt
c707186f57
Add AHA-1480 (adaptec cardbus scsi)
1999-10-29 21:30:19 +00:00
haya
65c3b4c4c7
Maintainance the name of Ricoh PCI-CardBus bridges.
1999-10-29 07:57:38 +00:00
thorpej
9d820e6fab
Add some 21142/21143 goo.
1999-10-28 23:32:37 +00:00
mjacob
44c603dd7b
Remove reference to loadable f/w.
1999-10-28 16:11:19 +00:00
leo
38cae5303b
Remove htopci(). bus_space_write_4() takes care of necessary endian conversions.
1999-10-28 13:49:19 +00:00
augustss
8ecf3c7c3e
Add support for ES1371. From OpenBSD and Ezra Story <ezy@panix.com>.
1999-10-27 13:20:34 +00:00
haya
0263d8db3d
Do not stop no matter when pci_mapreg_map fails to map bridge socket
...
registers. When it fails, reset Socket Base Address register and map
registers using rbus.
1999-10-27 00:48:36 +00:00
bouyer
0021900156
Add a missing '\n' in the cmd0640 attach printfs.
1999-10-25 14:13:12 +00:00
haya
5aa225ed2e
Disable legacy io port before the bridge is probed as a pcic on isa.
...
Comments ware changed to comply the KNF.
Add PCCBB_PCMCIA_16BITONLY to support TI PCI103X series.
1999-10-19 09:29:46 +00:00
mjacob
cdad48e3b7
Oops- missed a MAXISPREQUEST sized thing- these are all gone now. It's amazing
...
this didn't eat me.
1999-10-17 02:40:26 +00:00
mjacob
2b4cd26aa4
stylistic cleanups
1999-10-17 01:22:08 +00:00
augustss
c175d023d0
Comment out some debug settings.
...
Change attach printing so it looks more standard.
1999-10-15 10:59:56 +00:00
haya
e5cc414836
add NetBSD ID tag.
1999-10-15 06:42:21 +00:00
haya
4eee111127
This is the first check-in of CardBus driver. CardBus driver contains
...
CardBus bus stub, YENTA PCI-CardBus bridge (cbb), 3Com 3C575TX driver
(ex) and Intel fxp driver.
TODO:
o Conform to the KNF more strictly.
o Be unified with pcmcia code as much as possible.
o Add more drivers for CardBus card, such as APA-1480 or USB card.
The affected files are listed below.
sys/arch/i386/conf/files.i386
sys/arch/macppc/conf/files.macppc
sys/conf/files
sys/dev/ic/elinkxl.c
sys/dev/ic/elinkxlvar.h
sys/dev/ic/i82365.c
sys/dev/ic/i82365var.h
sys/dev/isa/i82365_isasubr.c
sys/dev/pci/files.pci
sys/dev/pcmcia/pcmcia.c
sys/dev/pcmcia/pcmciachip.h
The added files are listed below.
sys/arch/i386/conf/CARDBUS
sys/arch/i386/include/rbus_machdep.h
sys/arch/i386/i386/rbus_machdep.c
sys/arch/macppc/include/rbus_machdep.h
sys/arch/macppc/macppc/rbus_machdep.c
sys/dev/cardbus/if_ex_cardbus.c
sys/dev/cardbus/Makefile.cardbusdevs
sys/dev/cardbus/cardbus.c
sys/dev/cardbus/cardbus_map.c
sys/dev/cardbus/cardbusdevs
sys/dev/cardbus/cardbusdevs.h
sys/dev/cardbus/cardbusdevs_data.h
sys/dev/cardbus/cardbusvar.h
sys/dev/cardbus/cardslot.c
sys/dev/cardbus/cardslotvar.h
sys/dev/cardbus/devlist2h.awk
sys/dev/cardbus/files.cardbus
sys/dev/cardbus/if_fxp_cardbus.c
sys/dev/cardbus/pccardcis.h
sys/dev/cardbus/rbus.c
sys/dev/cardbus/rbus.h
sys/dev/pci/pccbb.c
sys/dev/pci/pccbbreg.h
sys/dev/pci/pccbbvar.h
1999-10-15 06:07:17 +00:00
mjacob
83bb47c85a
F/W version no longer relevant. Only do WWN seed for FC cards.
...
Now we malloc xflist and dma maps in mailbox setup routines.
We also do the appropriate endian swizzling at the end of a dma
map routine.
1999-10-14 02:14:35 +00:00
thorpej
358756a995
Add declaration for the Adaptec AIC-6915 64-bit 10/100 Ethernet interface.
...
Note: this is a placeholder right now; the driver should be ready in the
next few days.
1999-10-13 18:37:12 +00:00
augustss
b14b78dfc9
Deallocate resources (bus space and interrupts) when detaching from
...
the bus.
1999-10-12 11:21:24 +00:00
hannken
9d12a71473
Add support for `Adaptec AHA 2940UW Pro'.
...
Behaves like the `Adaptec AHA 2940UW'.
Device info: product id = 0x8778, Chip = AIC7880P.
1999-10-12 08:41:55 +00:00
hannken
2f3b72ae59
Regen.
1999-10-11 17:33:51 +00:00
hannken
5e63221d99
Add an entry for the Adaptec 2940UW Pro Scsi adapter.
1999-10-11 17:31:52 +00:00
cgd
c3703ecfdd
don't print using string pointer one off the end of the eso_rev2model
...
array. pointed out by Kouichi Hashikawa in PR#8601.
1999-10-10 18:52:03 +00:00
cgd
c3d5267629
Don't burst into flame when a QUEUE FULL message is received. Also,
...
do a gross hack which allows seemingly-broken quantum drives to function
with this driver. The gross hack is to disable tagged queueing completely
when QUEUE FULL is received. That costs performance on drives which
do tagged queueing properly and which return QUEUE FULL, but given the way
this driver works it's seems to be the only thing short of significant
recoding which will make it function with the quantum drives in question.
1999-10-08 20:43:45 +00:00
drochner
0b5c897fd0
1. include headers for NS support
...
2. pull in a fix from FreeBSD:
revision 1.18
date: 1999/09/17 18:04:14; author: wpaul; state: Exp; lines: +3 -3
Remember to account for ETHER_ALIGN when setting the maxmimum packet
length for mini receive ring. The max length was MHLEN, however the mbufs
are actually shortened to MHLEN - ETHER_ALIGN to force payload alignment.
1999-10-06 11:23:33 +00:00
thorpej
a339b2839b
Have I mentioned how much I love this driver? Fix the code in the tagged
...
queueing support that decreases the number of openings on a device; it
previously assumed that a scsipi_link's `openings' were descreased as
commands were issued, which is not longer the case (`active' is increased).
1999-10-05 17:45:57 +00:00
thorpej
120e8cac48
Fix a botch when updating for the SCSIPI changes.
1999-10-05 00:29:41 +00:00
thorpej
63b8530b4e
Update for SCSPI changes.
1999-09-30 23:04:39 +00:00
thorpej
30e63d853c
Define flags in pci_attach_args which indicate it's okay to use the
...
Memory Read Line, Memory Read Multiple, and Memory Write and Invalidate
PCI commands.
1999-09-30 20:30:06 +00:00
thorpej
2492ffef4c
Changes to get the Lite-On/Macronix 82C115 working:
...
- 82C115 has a 128-bit multicast hash table, not 512-bit.
- Correct the way the MAC address is read from the SROM, after re-reading
the MX98715A Application Note.
Other semi-related changes:
- Differentiate between MX98715 and MX98715A.
- Improve the Macronix link-up/link-down detection.
1999-09-30 17:48:24 +00:00
thorpej
e3398d3647
- Get a little closer on the Macronix chips. Still some more work to do.
...
- Add some basic support for the ADMtek AL981 clone (which, unfortunately,
I can't test until my sample boards arrive).
1999-09-29 18:52:19 +00:00
ad
f6e42db75a
- Move initial reset code into dpt_readcfg()
...
- Bus specific front-end is now responsible for reading EATA configuration
- EATA configuration data is now saved in the softc
- Make synchronous writes work properly
- Don't ignore HBA timeouts in dpt_cmd()
- Prefix eata_cfg's members with `ec_', not `dc_'
1999-09-29 17:33:02 +00:00
thorpej
1cb047331b
Regen.
1999-09-29 00:20:25 +00:00
thorpej
33f02f24b7
- Add Sundance Technolgy vendor ID.
...
- Add Sundance Technolgy ST201 10/100 Ethernet product ID.
- Add D-Link DFE-550TX product ID (uses ST201 chip).
1999-09-29 00:19:51 +00:00
thorpej
e2504d1efc
Regen.
1999-09-29 00:07:51 +00:00
thorpej
8f22cca8ea
Add adaptec AIC-6915 10/100 Ethernet.
1999-09-29 00:07:15 +00:00
thorpej
df12499646
Add code to take a device out of Power-Down state if it's in such a state,
...
and attempt to attach Macronix chips.
1999-09-28 23:12:23 +00:00
kleink
bb54953b63
Since the Audio 1 DMA controller implements the 24 low address bits only,
...
add the gross hack originally implemented by Charles Hannum in the SonicVibes
driver to force allocation of DMA memory for that channel through the Scatter-
Gather Map to get an address range that fits in.
The eso driver now works on Alphas except for DWLPX-based systems, whose owners
are not likely to desire audio or likely can afford slightly less cheap audio
hardware. :-)
1999-09-28 13:57:45 +00:00
ad
f653cce944
Regen.
1999-09-27 23:46:56 +00:00
ad
94367db635
s@SmartCache/Raid@SmartCache/SmartRAID@
1999-09-27 23:45:57 +00:00
ad
a289fc5023
Add glue for 'dpt' driver.
1999-09-27 23:44:27 +00:00
ad
48a0b6237a
A driver for DPT EATA SCSI adapters. dpt.c contains a brief TODO list.
1999-09-27 23:41:47 +00:00
cgd
6146ed7db8
add classes/subclasses new in PCI 2.2. Needs a bit of cleanup, but then,
...
so does everything involving configuration space headers and if i don't
get this out of my source tree i'll go insane.
1999-09-27 03:20:47 +00:00
thorpej
2bc8340297
Add a quirk entry for the Asante 21140[A] boards that don't use the
...
ISV SROM format. For these boards, we provide the GPIO pin direction
info, a separate reset hook, and hard-wire them to MII-on-SIO.
Based on a patch submitted by Luoqi Chen <luoqi@chekov.watermarkgroup.com>.
1999-09-26 05:03:58 +00:00
thorpej
4d4ddf363f
Some 21140[A] boards don't use the ISV SROM format (e.g. Asante boards),
...
but instead use the older DEC Address ROM format.
From a patch supplied by Luoqi Chen <luoqi@chekov.watermarkgroup.com>.
1999-09-26 04:43:45 +00:00
thorpej
b76293b895
Add quirk entry support for the 21041 and 21140 chips. Initial quirks
...
for these: extract the spiffy DEC board names (e.g. DE500-AA).
1999-09-26 04:37:29 +00:00
thorpej
4fa51ba8bd
Make tlp_read_srom() work on big-endian systems.
...
From a patch supplied by Luoqi Chen <luoqi@chekov.watermarkgroup.com>.
1999-09-26 03:39:01 +00:00
thorpej
c999e3ca1a
Add support for the DECchip 21140[A]. This currently only works with
...
boards which use MII for media attachment.
ISV SROM format information lifted from Matt Thomas's `de' driver.
Thanks to Dave Sainty for experimenting w/ his 21140A MII boards, and
for supplying a fix to the MII bit-bang code (PR #8382 ).
1999-09-25 00:27:00 +00:00
kleink
d9abf5e332
Add Game Port definitions.
1999-09-23 11:50:19 +00:00
kleink
cef2689773
Oops, we do have to check ourselves whether a given value is valid within an
...
enumeration.
1999-09-23 11:46:12 +00:00
mhitch
7460a0be93
Set sc_cfg3_fscsi for the AMD53C974 to match the change in ncr53c9x.c.
1999-09-22 03:32:00 +00:00
thorpej
664d8da4f5
Add support for the DECchip 21041. This also adds some preliminary
...
support for the ISV SROM format used in the 2114{1,1A,2,3}. Note, like
the 21040, auto-sense is not yet supported for the 21041.
Add a "pre-init" hook, which will be used for the 2114x and PNIC (currently)
which allows chip-specific code to set up and write OPMODE before the
chip is reset. This is necessary in order for the chip's internal
pathways to get initialized properly for MII/SYM/PCS/SIA media attachments.
Thanks to Dave Sainty for the hint from the `de' driver that inspired the
pre-init hook.
1999-09-20 19:26:54 +00:00
thorpej
6961f081e5
Fix packet reception in promiscuous mode: compare the Ethernet destination
...
address against our station address if it's not a multicast packet. Either
the Rhine manual lies about the phys/broadcast/multicast rxstatus bits,
or the Rhine chip is just broken.
Fixes a redirect storm problem reported by Laine Stump on current-users.
1999-09-20 17:40:58 +00:00
thorpej
79f938f5f8
Fix a few buglets in the multi-port 21040 code. ZNYX ZX314 confirmed
...
working now.
1999-09-17 21:55:01 +00:00
augustss
7049e8eb1b
Add preliminary (untested) code for detaching the USB host controller
...
(needed for CardBus based controllers).
1999-09-15 10:25:30 +00:00
thorpej
f23c7a31b4
Make sure 21040 chips are at least pass 2.0 and that 21140 chips are at
...
least pass 1.1.
1999-09-14 23:43:10 +00:00
thorpej
70997fd3d5
Move the PCI device number to the base Tulip softc; it will be needed to
...
decode the SROM on 21041 and 2114x multi-port boards.
1999-09-14 23:33:04 +00:00
thorpej
5c34356d4c
First crack at shared ROM/shared interrupts on 21040 multi-port boards,
...
plus quirk identification for non-multiple-port boards.
1999-09-14 22:25:48 +00:00
augustss
a6aa488db9
Don't do IO before we have set the tag and handle.
1999-09-14 09:29:05 +00:00
thorpej
e2a320f925
Oops, fix Winbond regshift.
1999-09-14 05:59:53 +00:00
thorpej
12c167b5ca
Change the semantics of `sc_regshift'; it is now the shift required to
...
make a CSR index number into a CSR offset. Introduce a couple of macros
to handle CSR name -> offset conversion.
1999-09-14 05:52:21 +00:00
augustss
10d4a4d5fe
And commit two files I forgot in the rearrangement for testing for
...
interrupt context.
1999-09-14 01:07:13 +00:00
thorpej
a03bd733ca
- More PNIC NWAY stuff. Still more work to do, here.
...
- Fix the SROM checksum routine.
- Add code to parse the old DEC Address ROM SROM format.
- Rearrange the statchg routines a bit, to make them consistent with one
another.
- Add support for the DECchip 21040. XXX No support for media autosense
yet, and no support for any of the multi-port boards yet.
1999-09-14 00:55:38 +00:00
soren
203f000d1a
Regen.
1999-09-11 06:27:36 +00:00
soren
dfbe7449e4
Add ENI SpeedStream.
1999-09-11 06:27:25 +00:00
augustss
6a58ae2d93
Regen.
1999-09-10 19:56:51 +00:00
augustss
fb9d7d86ae
Add more TI CardBus bridges. Taken from the CardBus patches.
1999-09-10 19:55:54 +00:00
thorpej
a10045109d
Add chip types for several more Tulip clones (ASIX, ADMtex, PNIC II, Davicom),
...
and match the Compex RL100-ATX; it uses the Winbond 89C840F (RL100-TX is
a Macronix 98713).
1999-09-08 22:29:46 +00:00
thorpej
e0c4f8ff92
Regen.
1999-09-08 22:25:56 +00:00
thorpej
dfdd1affb4
Add some more Tulip clones.
1999-09-08 22:25:19 +00:00
thorpej
ab08b6b863
Update for Lite-On product ID change.
1999-09-08 21:42:44 +00:00
thorpej
ab7310ed6e
Regen.
1999-09-08 21:39:54 +00:00
thorpej
9bb30be866
Add Davicom Semiconductor vendor ID, and Davicom DM9102 10/100 Etherent
...
product ID (Yet Another Tulip Clone).
1999-09-08 21:39:24 +00:00
thorpej
187510560e
Regen.
1999-09-08 21:34:33 +00:00
thorpej
46e11c9fd8
LITEON_PNIC -> LITEON_82C168
1999-09-08 21:33:59 +00:00
augustss
e1766aacfa
Make sure not to use the io handle before it's been initialized.
1999-09-04 22:00:32 +00:00
thorpej
6a2319b969
Byte swap the EEPROM words on the PNIC. From Stephen Ma.
1999-09-03 00:24:56 +00:00
ross
533b6088cd
Make it compile.
1999-09-02 23:23:03 +00:00
kleink
9c10799ac4
Use the approximated sampling rate to compute the filter rate.
1999-09-02 17:26:15 +00:00
fvdl
a6aa19699f
Don't assume that an -FX card has MII (because it doesn't).
1999-09-01 20:26:43 +00:00
kleink
480e8a1a1c
No longer requires mpuvar.h.
1999-09-01 18:03:10 +00:00
bouyer
ce80d27933
Don't try to unmap unmapped space in case of failure in
...
pciide_mapregs_compat(). From OpenBSD.
1999-09-01 15:17:07 +00:00
drochner
7c34574b94
add "ti" - Alteon Gigabit Ethernet
1999-09-01 11:54:32 +00:00
drochner
45e5d743af
quick 'n dirty port of FreeBSD's Alteon Gigabit Ethernet driver.
...
todo:
-IPv6
-clean up jumbo buffer allocation - NetBSD provides an opaque argument
to the free function, thus doesn't need the hack done here
-deal correctly with the mapping of the shared memory
1999-09-01 11:47:46 +00:00
drochner
7eaa4e57fd
regen
1999-09-01 11:42:32 +00:00
drochner
7c2d8bc001
-add some incarnations of the Alteon gigabit Ethernet adapter
...
-sort some entries which were put in by legasthenics
1999-09-01 11:40:42 +00:00
kleink
e5d76dce61
Don't make a human-readable device description being printed at attach time
...
depend on PCIVERBOSE.
1999-09-01 07:32:31 +00:00
thorpej
e293024ffa
This is the long-awaited "new Tulip driver", a complete, from-scratch
...
rewrite of the driver for the DECchip 21x4x Ethernet chips, and a variety
of clones.
Currently, the driver supports the Winbond 89C840F (this works pretty
well), and the Lite-On PNIC (e.g. NetGear PCI boards), however Lite-On
support may be broken [I may simply have a busted test board].
Eventually, support for the Macronix and ASIX chips will filter into
this driver, and then, slowly, support for the genuine DEC chips,
and maybe even the DE-425 EISA model.
1999-09-01 00:32:41 +00:00
bouyer
8e49b58de0
Add support for Intel 810 chipset (ICH/ICH0).
...
While I'm there merge back piix_channel_map into piix_chip_map.
1999-08-30 12:49:21 +00:00
bouyer
52068f73ce
Add support for the Promise Ultra/33 and /66 pci IDE controller. In addition to
...
chip-dependant code this required the following changes:
- Instead of attaching the device in a generic way with some chip-dependant
routines, use a chip-dependant attach routine with some common code
factored out. The code is marginally bigger, but this allows the CMD64x
flag hack to go away.
- For chips that report per-channel 'irq triggered', test this before calling
wdcintr() for the native-pci irq case (compat intr can't be shared),
as wdcintr() has no good way to know if a irq was for it or not, and
ends up with irq loss. XXX for chips that don't have this feature irq sharing
will not work properly !
- add my copyrigth notice (could have been done some time ago I think :)
There are still some issues to be solved with the Promise controller and
ATAPI devices.
Many thanks to Paul Newhouse for shipping me 2 Ultra/33 boards for doing this
work.
1999-08-29 17:20:10 +00:00
bouyer
4819ee1cf1
Add definitions of the DMA mode control registers. They should be used
...
by pciide, but I have yet to find how to map them.
1999-08-29 17:06:43 +00:00
augustss
64c7328230
Regen.
1999-08-28 09:22:58 +00:00
augustss
d0fbee34df
Add a bunch of i810 devices. From Paul Shupak <paul@plectere.com>.
1999-08-28 09:18:08 +00:00
thorpej
299c0b1d83
Regen.
1999-08-27 23:27:39 +00:00
thorpej
e1b0108ce6
Add Samsung Semiconductor KS8920 10/100 Ethernet.
1999-08-27 23:25:36 +00:00
soren
aa550d38fb
Regenerate.
1999-08-24 21:32:25 +00:00
soren
fa181849a2
Add Intel i740.
1999-08-24 21:32:04 +00:00
augustss
5d8adfb5a2
Disable interrupts early.
1999-08-21 21:35:36 +00:00
sommerfeld
be5fe633b8
clean up attach messages slightly.
1999-08-20 03:36:59 +00:00
matt
fd59bba7cb
after bus_dmamem creating some memory, zero it out. This has stopped
...
my alpha from getting COMMAND FAILED on random boots.
1999-08-19 00:43:45 +00:00
drochner
f61d8fd937
regen
1999-08-17 09:42:14 +00:00
drochner
c8aabedc83
-mention a location where the old PCI database can still be found
...
-add Alteon Gigabit Ethernet
1999-08-17 09:40:25 +00:00
mcr
03946f957a
Added Solidum Systems PCI vendor ID and Device IDs
1999-08-16 21:36:39 +00:00
kleink
48f055e09b
Add missing MPU interrupt glue.
1999-08-14 22:42:16 +00:00
kleink
7b34e008a9
Forgot to initialize a pointer; from Simon Burge.
1999-08-14 15:05:02 +00:00
hwr
4882320d4b
Initialize error variable. Should fix spurious init errors.
...
From Dave Huang in PR 8205.
1999-08-14 11:23:39 +00:00
hwr
af827a1284
Remove dulicate "Ethernet" output. From Dave Huang in PR 8206
1999-08-14 11:09:18 +00:00
bouyer
59af828a94
Regen.
1999-08-12 09:43:18 +00:00
bouyer
7c3cb9c796
Add Promise Ultra66, change entry of Ultra33 to reflect the fact that can
...
"only" do ultra/33.
1999-08-12 09:42:11 +00:00
tron
439a6c4942
Add missing prototype for read_tekram_eeprom() to make driver compile if
...
"options NCR_TEKRAM_EEPROM" is specified in the kernel configuration file.
Patch supplied by Hans Hoppe in PR kern/8141.
1999-08-04 20:51:31 +00:00
thorpej
4bd8f1566c
Be a little nicer about memory usage:
...
* Don't allocate receive buffers until the interface is actually brought
up, and release all of them if the interface is taken down.
* Add a knob (defaults to off) which will copy an incoming packet to
a single header mbuf if it is small enough to fit in one, rather than
burning an entire cluster on it. Note that this change will be mostly
moot if/when sbcompress() it changed to handle compressing clusters.
1999-08-03 17:25:51 +00:00
augustss
dbb71e4b35
Add the file I forgot at the previous MPU changes.
1999-08-03 00:27:27 +00:00
augustss
42fb510148
Move the mpu device declaration to conf/files.
...
Let the mpu device attach at the sb device, and then midi at the mpu.
Update the mpu at eso attachment.
1999-08-02 17:37:41 +00:00
augustss
cbf1f6f1b9
Move the MPU driver isa/ to ic/.
...
(I didn't move it in the repository because the revision history
is very short and uninteresting. :)
1999-08-01 18:05:39 +00:00
veego
9baa857f5b
Regen.
1999-08-01 08:32:48 +00:00
veego
9657de4af2
Add an entry for the TI PCI1211 PCI-CardBus Bridge.
...
From the cardbus patches.
1999-08-01 08:32:08 +00:00
thorpej
76dcbfad36
Regen.
1999-07-29 20:58:19 +00:00
thorpej
8548b384f5
Add some Initio SCSI controller IDs.
1999-07-29 20:56:55 +00:00
bouyer
a81c366fed
Bump MAX_START to 256, so that the ncr driver can work with more than 5
...
devices on the same bus. See PR kern/6347 for details.
1999-07-29 10:00:34 +00:00
soren
7220690fb8
Regen.
1999-07-28 22:38:00 +00:00
soren
4341d92cb3
Correct Acard device names.
...
Add and update a few IBM devices.
Add Toshiba and NEC devices in Portege 3K's.
1999-07-28 22:36:10 +00:00
castor
0a1820a4e7
regen
1999-07-27 17:55:00 +00:00
castor
424a28aa79
Add vendor ID for Geocast
1999-07-27 17:52:59 +00:00
thorpej
b73b84643f
Add support for the SMC 83c175. Also, print out the chip rev when
...
we attach.
1999-07-27 00:37:34 +00:00
thorpej
f48807a678
Regen.
1999-07-27 00:24:06 +00:00
thorpej
b5dc3f5708
Add product ID for the SMC 83c175 Fast Ethernet chip. This is a cousin
...
of the SMC 83c170 which also supports CardBus.
1999-07-27 00:23:47 +00:00
drochner
963921febe
regen
1999-07-20 20:59:03 +00:00
drochner
62adeef8f6
add TI TVP4020 Permedia 2
1999-07-20 20:58:20 +00:00
ross
5122ae5f44
Recognize 3c905C.
1999-07-15 18:10:29 +00:00
ross
4dae830922
Regen.
1999-07-15 18:06:39 +00:00
ross
4495d8362a
product 3COM 3C905CTX 0x9200
1999-07-15 18:02:08 +00:00
augustss
50eef750e4
Regen.
1999-07-15 14:53:13 +00:00
augustss
8a5bb754c7
Add Cinemaster C 3.0 DVD Decoder.
1999-07-15 14:52:48 +00:00
fvdl
76b2d00f39
Regen.
1999-07-14 23:03:09 +00:00
fvdl
a641b41593
Add/change a few Adaptec controller IDs.
1999-07-14 23:02:01 +00:00
kleink
cf917747a1
Add a driver for the ESS Technology Solo-1 PCI AudioDrive line of chips.
1999-07-12 15:13:30 +00:00
kleink
7d8abaa49e
Regen.
1999-07-12 15:04:41 +00:00
kleink
ecbc7c6afd
Change the ESS Solo-1 description string to match the data sheet.
1999-07-12 15:02:46 +00:00
bouyer
0612a1ddef
Fix typo in a printf, from Soren S. Jorvan.
1999-07-12 13:49:38 +00:00
kleink
2422638ad5
Fix a buglet in the driver's DMA buffer list ipmlementation, causing the next-
...
in-list (wrong) descriptor structure of the buffer in question to be freed.
1999-07-10 16:46:19 +00:00
mjacob
3bb408eb05
Change to approved NASA/Ames copyright. Add in Qlogic 2200 support.
1999-07-05 20:28:11 +00:00
cgd
636e8f4688
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 05:55:23 +00:00
cgd
111e8a47c4
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37).
...
This means that all SIIG PCI serial/parallel cards (described on their
web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 05:38:05 +00:00
itojun
118d2b1d4f
IPv6 kernel code, based on KAME/NetBSD 1.4, SNAP kit 19990628.
...
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
1999-07-01 08:12:45 +00:00
drochner
6d864c0914
add driver for the Bit3 PCI-VME adapter, without the DMA parts for now
1999-06-30 17:45:38 +00:00
fair
3a845702d7
A reference to http://members.hyperlink.net.au/~chart/pci.htm in comments;
...
this new effort at collecting PCI data outside the PCI SIG replaces the
one that was referenced in here before.
No regeneration required.
1999-06-30 16:52:52 +00:00
drochner
dbd86a254c
add driver for realtek 8129/8139, from freebsd, with mii stuff kicked out
1999-06-27 15:19:40 +00:00
drochner
746543928c
regen
1999-06-27 15:15:00 +00:00
drochner
120b30daf4
add some realtek 8139 clones
1999-06-27 15:13:54 +00:00
pk
37d80b004f
Remove dead file; alphabetize
1999-06-20 18:17:22 +00:00
pk
df81191ccd
Remove dead file
1999-06-20 18:07:18 +00:00
thorpej
4a0270a264
Intel i82557 driver is now split into bus and chip bits.
1999-06-20 16:35:40 +00:00
augustss
d98b0bd725
Regen.
1999-06-19 04:51:42 +00:00
augustss
0650293580
Add Sony CXD 1947A FireWrire Controller and Neomagic 128XD.
1999-06-19 04:49:52 +00:00
tsubai
12c2ab7750
Regen.
1999-06-18 04:55:27 +00:00
tsubai
25b9bffe81
Add some Apple and MOT products.
1999-06-18 04:54:06 +00:00
dante
35e149ef50
Move chip version check from advlib.c to adv_pci.c
1999-06-12 12:09:58 +00:00
mrg
efb227d3a7
fix a few KNF nits ..
1999-06-08 10:38:15 +00:00
tron
a1259a8d1b
Regen.
1999-06-05 10:42:15 +00:00
tron
bffc27b587
Add Matrox MGA 400, 3Dfx Banshee and Voodoo 3.
1999-06-05 10:41:37 +00:00
tron
2b262e8565
Regen.
1999-06-05 09:44:03 +00:00
tron
fce6975678
Add entry for Riva TNT and correct entry for Riva 128.
...
Fixes first half of PR kern/7699 by Bjoern Labitzke.
1999-06-05 09:43:21 +00:00
drochner
ee9cd19ba7
regen
1999-06-02 08:57:02 +00:00
drochner
1fabcae9bf
add SIS 6326 low-end AGP graphics
...
fix CL_PD6832 device id, PR kern/7691 from Paul Dokas
1999-06-02 08:56:03 +00:00
thorpej
f687b845d0
Make sure bus mastering is enabled; some broken BIOSes don't set this
...
up properly.
1999-06-01 19:17:59 +00:00
thorpej
2349cbb5b3
Glue in the SiS900 Ethernet controller driver.
1999-06-01 18:29:50 +00:00
thorpej
ba43886d7e
Device driver for the Silicon Integrated Systems SiS900 10/100 Ethernet
...
chip, found on the IBM Netstation.
1999-06-01 18:19:13 +00:00
mrg
58aa48a579
regen.
1999-05-29 07:12:11 +00:00
mrg
5dfbc15479
fix error in previous.
1999-05-29 07:10:33 +00:00
mrg
3f99c8bd11
regen.
1999-05-29 07:08:52 +00:00
mrg
a250615a3b
s/bus/bridge/ for the sun pci bridges. my bad.
1999-05-29 07:07:51 +00:00
fvdl
06019caad8
Recognize 900B-TPC. From Robert Elz.
1999-05-29 01:31:17 +00:00
fvdl
8a6bddab08
Regen.
1999-05-29 01:29:21 +00:00
fvdl
0ca37269fb
Add 3c900B-TPC product ID. From Robert Elz.
1999-05-29 01:28:52 +00:00
bouyer
cc46db1ba6
For the PIIX, make sure the PIO_mode and DMA_mode get reset to the values used
...
by the controller for all drives.
1999-05-27 09:45:50 +00:00
mrg
c346b0ace0
regen.
1999-05-27 03:05:32 +00:00
mrg
8c83c41668
add the UltraSPARC IIi PCI interface
1999-05-27 02:51:19 +00:00
veego
e21201e114
Regen.
1999-05-23 21:28:03 +00:00
veego
a674692065
Add several entries.
1999-05-23 21:26:54 +00:00
augustss
4655ae1230
Keep track of vendor id and make sure the vendor string is NUL terminated.
1999-05-20 09:52:35 +00:00
augustss
b9f32af4e5
Regen.
1999-05-20 09:23:33 +00:00
augustss
10713ae5ad
Change vendor id 0x11c1 to Lucent since that seems to be what it is now.
...
Add a Lucent USB controller.
1999-05-20 09:23:08 +00:00
thorpej
f98d358a1f
Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
...
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
drochner
d2fe8176fd
regen
1999-05-17 17:08:08 +00:00
drochner
2187089e80
add NeoMagic 256AV Video/Audio chip
1999-05-17 17:07:00 +00:00
thorpej
0d0cc4aa14
Rework the way ukbd attaches itself as the console (again). We now allow
...
the code to pick the first USB keyboard instance as the console, ignoring
which USB controller it's on. Should eventually allow detaching of the
console keyboard.
From Jason Thorpe <thorpej@nas.nasa.gov>
1999-05-13 23:34:38 +00:00
explorer
2fc0e43760
just say no to __BROKEN_INDIRECT_CONFIG
1999-05-12 22:55:14 +00:00
mjacob
61bf929d14
Do a fairly large internal restructuring to accomodate dual-bus host adapters
...
(e.g., the 1240). Include the new 1080/1240 NVRAM layout reading code. Some
moderately significant mailbox changes were necessary also to accomodate a
second channel.
1999-05-12 18:59:23 +00:00
thorpej
83b019c919
Set the data link type to DLT_PPP_SERIAL so that tcpdump can do
...
something useful with our captured frames.
1999-05-11 02:57:58 +00:00
hwr
fbdd142801
Regen.
1999-05-07 21:20:12 +00:00
hwr
0fd4ff06c2
Added CIRRUS CL_PD6832 from "Johnny C. Lam" <lamj@stat.cmu.edu> in kern/7119.
1999-05-07 21:19:06 +00:00
hwr
4d524d7360
Regen.
1999-05-07 21:11:20 +00:00
hwr
91ddf1d6a6
Added TI PCI1251 from joda@pdc.kth.se (Johan Danielsson) in kern/6873.
1999-05-07 21:09:31 +00:00
drochner
1669ea470b
regen
1999-05-07 15:40:57 +00:00
drochner
1ce7678fb8
add another AGP graphics chip and a PCI-VME interface
1999-05-07 15:38:40 +00:00
matt
307a48b721
Regen
1999-05-07 00:57:46 +00:00
matt
e735c2bf67
Add TI LYNX FireWire Controller (as used in the Apple B&W G3)
1999-05-07 00:56:46 +00:00
thorpej
375d7c32f2
Add a way for machine-dependent code to tell a USB controller that it
...
has the console input device. The USB keyboard driver uses this to
attach the first USB keyboard instance as the console keyboard.
Unfortunately, this must still be deferred to autoconfiguration time,
but there's not much we can do about that right now.
1999-05-06 19:12:22 +00:00
mrg
8c630939a3
regen
1999-05-06 14:29:21 +00:00
mrg
10c5298d7e
add pci devices found in U5's:
...
- ati weird mach64
- ebus bus
- `network' hme compatible ethernet
- `simba' PCI bus
1999-05-06 06:17:39 +00:00
thorpej
964b69ec84
Back out previous. Thanks to cgd for pointing out another way to do this.
1999-05-06 01:10:28 +00:00
thorpej
2a4490daa5
Add a `bus' member to the pci_attach_args. This is not normally used,
...
but some child drivers might need to know this information.
1999-05-06 01:01:19 +00:00
bouyer
9893727873
Fix the way we compute the mode to use: for multiword DMA, the used mode was
...
2 less than the one we could really use, so for multiword DMA mode 0 or 1,
the driver tried to use DMA mode 255 or 254 (0 - 2 with a u_int8_t).
1999-05-05 15:24:59 +00:00
ross
7bffc1e720
Protect WDCDEBUG from multiple definitions.
1999-05-03 07:44:47 +00:00
nathanw
4f8cf68674
Rototillage; make this actually useful. To wit:
...
- Initialize more of the Bt463's registers, instead of leaving them
in undefined states. Notably, the window type table is set up
with 8-plane pseudocolor and 24-plane truecolor modes.
- Bus-space-ify, mostly. Could use some more cleanup, but not until
the rest of the tga stuff is converted, too.
- Do the TGA/RAMDAC communication dance more carefully.
- Explain a lot more of what's going on in comments.
1999-04-30 02:47:42 +00:00
ross
770b67425d
Accelerate scrolling. Originally by Roland Dowdeswell, revised by
...
{drocher,ross}@netbsd.org.
1999-04-28 23:24:33 +00:00
thorpej
55fd59f1e0
Make PCI IDE DMA work on big-endian systems.
1999-04-28 00:18:12 +00:00
thorpej
1eb689a712
Make the VIA Rhine driver work on big-endian systems. From Izumi Tsutsui,
...
PR #7305 .
1999-04-26 23:19:10 +00:00
thorpej
4c7a2ee3b0
Fix a couple of problems in the PCscsi-PCI driver:
...
* resid in pcscp_dma_intr() should also be set in the data out phase.
* Don't set up DMA in the transfer pad operations.
* Change URL of the PDF technical manual to the index page.
* include <machine/bswap.h> on big endian machines.
Fixes timeouts writing large blocks to tapes. From Izumi Tsutsui,
PR 7252.
1999-04-25 01:20:02 +00:00
thorpej
207f873ac2
Fix an mbuf leak in the strict alignment case of packet reception.
1999-04-24 22:09:56 +00:00
jonathan
af729a150c
initialize 'p' for lame gcc-2.7.2.2 flow analysis.
1999-04-14 03:26:34 +00:00
jonathan
9e87738e9d
Add entries for TI, Ricoh, Toshiba PCI-to-cardbus bridge chips, so
...
we can identify them as cardbus chips supported by the cardbus patches.
Add entry for OPTI chipsets whose interrupts arent properly set up by
some BIOSes.
From cardbus patches<ftp://nandra.iri.co.jp/pub/NetBSD/CardBus by
HAYAKAWA Koichi <haya@tcad.ulsi.sony.co.jp>.
1999-04-12 23:18:16 +00:00
cjs
ecab881e98
PR 6852 from Chris Jones <cjones@hideo.nervana.montana.edu>.
...
This handles the interrupt structure of Compex boards.
1999-04-12 04:31:55 +00:00
bouyer
2198b984e8
Kill an extra 'pciide0: ' in a printf
1999-04-06 17:49:14 +00:00
mjacob
eebeea5b23
Read the board revision and trim cache line size back from 16 to 1
...
for early revision 2100 boards. Make sure to turn ROM off for these
boards.
1999-04-04 01:14:58 +00:00
tsubai
500edb5379
Fix typo. (From PR 7027)
1999-04-01 14:55:25 +00:00
tsubai
4384fd5134
Fix big-endian support.
...
TULIP_BUSMODE_BIGENDIAN does bswap packet buffers also, so we should use
TULIP_BUSMODE_DESC_BIGENDIAN on big-endian machines. (PR 7027)
XXX 21040 doesn't have this bit, but supporting only 21041+ is better than
nothing.
1999-04-01 11:02:20 +00:00
mjacob
e50460f5fa
Oops- if you enable 1080 support, remember to load the f/w
1999-03-27 01:08:59 +00:00
mjacob
99d46bf762
add isp1080 support and some basic PDB change stuff
1999-03-26 22:39:44 +00:00
bouyer
d907e1f61e
First pass at support of Compaq NetFlex 3/P PCI: this one has
...
IO and Mem base address register inverted.
Still need some MII hack to get it fully fonctionnal.
1999-03-25 16:15:00 +00:00
explorer
6b9af88b99
wrap kernel bits in shared kernel/userland files
1999-03-25 04:09:33 +00:00
explorer
7bfd643eab
install if_lmc*.h
1999-03-25 03:54:43 +00:00
explorer
0c2f5ada28
Commit files for the LAN Media Corporation high speed serial/HSSI/DS3 driver
1999-03-25 03:32:43 +00:00
explorer
960c283a65
Add LAN Media Corporation info
1999-03-25 03:28:17 +00:00
explorer
77597ecd3e
Start commit of Lan Media Corp T1/HSSI/DS3 driver
1999-03-25 00:51:53 +00:00
cgd
fe0bb65b38
in general, it's a good idea to make sure you at least have all of the
...
variables you reference, before you commit something...
1999-03-24 18:47:51 +00:00
mrg
d2397ac5f7
completely remove Mach VM support. all that is left is the all the
...
header files as UVM still uses (most of) these.
1999-03-24 05:50:49 +00:00
thorpej
3993ee01e4
Don't enable I/O or memory access here! These bits in the PCI CSR are
...
set up by the firmware, and indicate which mapping types the system
supports.
1999-03-24 01:07:59 +00:00
thorpej
ac0f626cca
Make sure bus mastering is enabled.
1999-03-24 01:05:15 +00:00
thorpej
9f85a4a798
Make sure bus mastering is enabled.
1999-03-23 23:18:50 +00:00
mycroft
cfe7413adb
Make 48KHz output work.
1999-03-22 07:58:55 +00:00
mycroft
f60907c286
Regen.
1999-03-19 06:40:11 +00:00
mycroft
4e92fb2fd1
Add AudioPCI 97 (a.k.a. Creative Ensoniq AudioPCI).
1999-03-19 06:39:32 +00:00
cgd
ff42ff62e8
pull pci_machdep.h in from machine/
1999-03-19 03:37:52 +00:00
thorpej
1954300d6c
Regen.
1999-03-17 19:21:49 +00:00
thorpej
0d433f490b
Add Silicon Integrated Systems SiS900 10/100 Ethernet.
1999-03-17 19:20:51 +00:00
mjacob
d596b20f1e
prototype 1080/1240 support
1999-03-17 06:16:42 +00:00
mjacob
e380eb62d5
Tron whacked my you-know-what because I didn't follow procedure.
...
So I insered his description of the 'procedure' in the most likely
place a developer will find it.
1999-03-16 22:41:56 +00:00
tron
ddbc34d638
Regen from "pcidevs".
1999-03-16 22:32:58 +00:00
mjacob
f50c9fa8ea
add Qlogic 1080 && 1240 product IDs
1999-03-16 21:24:46 +00:00
sakamoto
23903bfc0e
Regen.
1999-03-11 05:17:54 +00:00
sakamoto
272f5b609d
Add several VIA Technologies chipsets.
1999-03-11 05:17:24 +00:00
drochner
5704ad4969
regen
1999-03-09 11:48:59 +00:00
drochner
2987883f07
add 2 ISDN cards, from Martin Husemann per PR kern/7110
1999-03-09 11:48:03 +00:00
explorer
3ebb419571
Update to slightly altered rnd_attach_source() api
1999-02-28 17:08:05 +00:00
dante
ceef7fa3d7
Fix AdvanSys Narrow driver to work on Alpha
1999-02-25 20:20:30 +00:00
bouyer
71036465a5
In cy693_setup_channel(), setup timings for IOR too (they were left to 0,
...
which is a way too higth timing for some devices). Thanks to Ken Wellsch
for trying the multiple debug kernels until the problem was located.
1999-02-22 10:12:00 +00:00
ross
ea05c3b739
Fix typo.
1999-02-20 07:07:07 +00:00
thorpej
598b05da47
Regen.
1999-02-19 19:12:09 +00:00
thorpej
d9c29083d4
Improve descriptions for DEC Ethernet chips.
1999-02-19 19:11:33 +00:00
thorpej
3f8a09bba4
Improve product descriptions, and add 3c905-FX and 3c980 Server Adapter
...
products.
1999-02-19 06:58:42 +00:00
thorpej
7248c3be19
Improve card descriptions.
1999-02-19 06:57:56 +00:00
thorpej
02df2bd5a5
Regen.
1999-02-19 06:56:53 +00:00
thorpej
1128dd593e
Improve the descriptions of 3Com Ethernet cards, and add the 3c905B-FX
...
and 3c980 Server Adapter products.
1999-02-19 06:55:15 +00:00
thorpej
3a63b5db2a
Regen.
1999-02-19 05:53:36 +00:00
thorpej
f43c45889a
Add several Tulip clone chips.
1999-02-19 05:53:00 +00:00
mycroft
bd4cd051b9
This is an utterly revolting hack to work around the previously mentioned
...
lossage. On the Alpha, we force the buffers to be allocated through the SGMAP
so that the PCI bus addresses are low enough.
At least it's only one line of code...
1999-02-19 02:27:59 +00:00
thorpej
a473ed5477
Fix omission in previous.
1999-02-18 19:24:39 +00:00
mycroft
699a815751
Pass the correct address (PCI bus address, not PA) to the card.
...
Also fix some typos and add more debugging printf()s.
This would work on the Alpha, but the card I have appears to have the upper
address bits chopped off, and the ring buffer gets mapped using the DGMAP,
which uses the upper bits. Boom.
1999-02-18 09:22:17 +00:00
mycroft
e0b748e50c
Pass the correct address (PCI bus address, not PA) to the card.
...
Works on an Alpha now.
1999-02-18 07:59:30 +00:00
mycroft
c02bf3c4d7
Minor code munging.
1999-02-18 05:46:38 +00:00
thorpej
982603ce5b
Don't reset the interface when the media changes.
1999-02-18 01:24:29 +00:00
thorpej
78e18b8d8c
Back out to the previous stable revision of the fxp driver. The latest
...
one had too many stability problems.
1999-02-18 01:23:41 +00:00
mycroft
6ce15ae4e3
spaces -> tabs
1999-02-18 00:55:36 +00:00
mycroft
f1e84a4ec5
A few things:
...
* Use the trigger interface.
* Permit different encodings for record and playback.
* Set AUDIO_PROP_INDEPENDENT.
* Fix the mmap(2) hole again.
* Use 16-bit mode for a-law and u-law playback.
1999-02-18 00:54:19 +00:00
mycroft
8b7b7cccc7
Fix a silly type.
1999-02-17 23:55:18 +00:00
mycroft
71105fbda7
Update comments.
1999-02-17 21:44:55 +00:00
mycroft
e5f5e628d2
Pass the direction to the allocm and round_buffersize methods.
...
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
bouyer
2ccd5cde74
Correctly compute PIO/DMA mode for sis and acer chips when the drive support
...
a DMA mode with higther capabilities than PIO mode.
1999-02-16 18:11:52 +00:00
hubertf
56f2d188fc
RCS ID police
1999-02-15 04:54:34 +00:00
tron
210b267f84
Regen from pcidevs.
1999-02-14 22:44:36 +00:00
tron
acb24b6080
Add 3Dfx's Voodoo II. Fixes PR kern/7000 by Brett Lymn.
1999-02-14 22:38:18 +00:00
thorpej
70b91539e9
Restructure the interrupt handler and 1-second timer a bit, and tidy up
...
the lazy-transmit-interrupt logic, fixing a few minor logic problems.
Now unable to reproduce the lockup problem described in PR #6767 . Changing
PR's state to "feedback".
1999-02-13 02:12:59 +00:00
thorpej
f83663b7ba
Garbage-collect some unneeded definitions.
1999-02-12 00:37:07 +00:00
thorpej
7b516b31bd
Major overhaul of the Rhine/Rhine-II driver, structuring it a little more
...
like the SMC83C100 EPIC/100 driver:
* Rather than using pointers to the head and tail of the transmit and
receive rings, use wrapping indexes into arrays. This is a little more
obvious when reading the code.
* More cleanly separate the hardware descriptor from the software descriptor.
* bus_dma it everywhere.
* Implement interrupt pacing and avoid a potential race in the transmit
loop.
Now this looks more or less like the Rhine driver I was working on when
this driver was committed :-) Update copyright notice to reflect that.
1999-02-12 00:36:48 +00:00
sakamoto
0b4e481612
add "mii" to vr driver.
1999-02-09 02:04:36 +00:00
mjacob
c47d6855db
clean up pci configuration a bit
1999-02-09 00:35:35 +00:00
cgd
6b77f11d67
put in better name/description for Simon G's board
1999-02-06 06:55:15 +00:00
cgd
04046c6dd7
add code to cope with multiple ports per BAR, as are found, for instance,
...
on the 8 port card Simon Gerraty has. In general, cards which have
this lots of ports also have a separate interrupt status register, but
this change is just to talk to the various ports independently. It works,
but it's not optimal. (XXX still need a good name for the card in the
comments, and to update the manual page.)
1999-02-06 06:29:54 +00:00
thorpej
23382bdfcb
Regen.
1999-02-05 22:55:40 +00:00
thorpej
0955479f29
Add some Olicom Ethernet device IDs, from FreeBSD's tl driver.
1999-02-05 22:55:19 +00:00
thorpej
d95d5b1488
Make this driver work on the Alpha. Apparently the receive DMA mechanism
...
has the same 4-byte alignment requirement that the transmit side does. This
causes the packet payload to be misaligned. So, on systems which require
strict alignment, we must copy the incoming frame to a new packet buffer,
suitably aligned.
1999-02-05 22:09:46 +00:00
thorpej
b52d1e44d0
Fix the interrupt handler to actually acknowledge the interupt to the
...
dispatch code (!!!). How did this work even on the i386 before?
1999-02-05 21:20:31 +00:00
thorpej
dde3694c4c
Fix some formatting nits.
1999-02-05 08:42:03 +00:00
thorpej
82a54250be
Remove some duplicate softc members, and comment some of the softc
...
fields.
1999-02-05 08:27:46 +00:00
thorpej
8bf66d3eb2
Remove some unnecessary splnet's.
1999-02-05 08:21:31 +00:00
thorpej
50faf19d7d
splimp -> splnet
1999-02-05 07:53:24 +00:00
thorpej
adc9c40688
Use the generic MII support code, not our own.
1999-02-05 02:58:38 +00:00
thorpej
ebf3a97519
Use MII command opcodes from <sys/dev/mii.h>
1999-02-05 01:17:24 +00:00
thorpej
909b90d2d4
Rename VR_MIICMD_DATAIN and VR_MIICMD_DATAOUT to actually match what the
...
data sheet says. (The names and their usage were exactly reversed in the
code.)
1999-02-05 01:10:30 +00:00
bouyer
5888b4354e
channel_map is called before setup_chip, so whe need to enable the channel
...
status bits in acer_channel_map().
1999-02-02 17:06:05 +00:00
bouyer
ca240ca7b5
Support for Acerlab M5229 IDE controller. Thanks to Thilo Manske for testing
...
the code, and to Takahiro Kambe who run several tests and finally found the
bug by himself :)
1999-02-02 16:13:59 +00:00
thorpej
05cbb33e4c
Use pcidevs.h to get vendor and product IDs.
1999-02-02 00:32:21 +00:00
thorpej
b6a84f08e8
Take software-only structure definitions out of the register description
...
header.
1999-02-02 00:29:17 +00:00
thorpej
bb5edf7345
Remove support for FreeBSD from the driver; so many changes are going
...
to be required to make it properly portable to all of NetBSD's platforms,
that it just wouldn't be worth the effort.
1999-02-02 00:05:02 +00:00
thorpej
2bdfbafc37
Minimal changes to make this compile on the Alpha. Much more work is
...
needed to make this a truly portable driver.
1999-02-01 23:40:22 +00:00
mjacob
1ece20c808
roll internal release tag
1999-01-30 07:08:04 +00:00
augustss
d6c1a3e198
Regen.
1999-01-28 04:34:31 +00:00
augustss
864e74c18d
Add S3 86C365 Trio3D.
1999-01-28 04:31:33 +00:00
sakamoto
fd094d79ee
NetBSD RCS id.
1999-01-26 06:31:28 +00:00
sakamoto
57d82cd1f3
Change bootverbose 1 to 0.
...
Add vr_lookup.
1999-01-22 05:34:36 +00:00
sakamoto
02bb7a4233
Add VIA Rhine/Rhine II Fast Ethernet files.
1999-01-21 12:02:00 +00:00
sakamoto
4f99746d57
Add NetBSD autoconfiguration support.
...
KNF.
1999-01-21 12:00:25 +00:00
sakamoto
bea8f807a7
Import FreeBSD's VIA Rhine fast ethernet PCI NIC driver
...
written by Bill Paul <wpaul@ctr.columbia.edu>.
1999-01-21 11:55:22 +00:00
drochner
76db984c6d
regen
1999-01-16 11:28:19 +00:00
drochner
1587097426
add another NCR chip, from Dave Sainty <dave@dtsp.co.nz> per PR kern/6819
1999-01-16 11:27:40 +00:00
tron
edd69ba694
Because memory mapped access doesn't fail only with the docking station
...
for the TI TravelMate 5000 but also with at least one Compaq NIC we
prefer I/O mapped access again. Fixes PR kern/6690.
1999-01-11 22:45:41 +00:00
thorpej
67e9d2a3bf
Fix a few glitches in the nwscons tga driver, PR #6655 , Brett Slager.
1999-01-11 22:11:36 +00:00
drochner
1eba733d91
remove dummy "load_font" entries
1999-01-11 21:35:54 +00:00
mjacob
4401c8bdd7
oops. Forgot to turn on PCI burst.
1999-01-10 03:41:47 +00:00
thorpej
c35b8b591b
One more cosmetic change, from Izumi Tsutsui.
1999-01-08 19:55:17 +00:00
augustss
0d32a9a78b
Fix more `void *' arithmetic.
1999-01-08 19:22:34 +00:00
thorpej
3dc31bab2f
Device declaration for the PCscsi-PCI SCSI chip driver.
1999-01-06 23:25:53 +00:00
thorpej
671d0ae88d
Device driver for the AMD Am53c974 PCscsi-PCI SCSI chip (i.e. the chip used
...
on the Tekram DC-390 SCSI cards), from Izumi Tsutsui, PR#6654. Minor
cosmetic changes by me.
1999-01-06 23:23:33 +00:00
hwr
446f262aa5
Regen
1998-12-30 13:50:42 +00:00
hwr
4d3847e0ea
Add NeoMagic MagicGraph 128ZV graphic chip.
1998-12-30 13:49:49 +00:00
mjacob
8ac99457db
I mean *really* clean up headers
1998-12-28 19:12:04 +00:00
mjacob
b51e3fbf3c
clean up headers; remove early revision 2100 workarounds
1998-12-28 19:11:32 +00:00
augustss
da39a16267
Fold lines to 80 chars.
1998-12-27 13:03:58 +00:00
drochner
71fa656b19
use a symbolic definition for the PCI subsystem ID
1998-12-21 20:56:06 +00:00
drochner
c896b644ba
use a symbolic definition for the PCI subsystem ID
1998-12-21 20:40:01 +00:00