they use the mini D$.
This results in a small performance boost on xscale platforms, since
flushing the main cache on a context switch won't affect the kernel
stack/pcb.
* _UC_MACHINE_PC() - access the program counter
* _UC_MACHINE_INTRV() - access the integer return value register
* _UC_MACHINE_SET_PC() - set the program counter (this requires
special handling on some platforms).
GPIO interrupt, check the GPIO interrupt status register after clearing
it down to see if the interrupt source has disappeared. If it does,
assume it was a spurious event. Otherwise, panic.
- Move board-specific PCI/GPIO initialisation to its rightful place.
- Handle clearing down latched GPIO interrupts in a board-independent way.
- Use MI com(4) driver for on-chip UARTs.
- Misc. tidying up.
Tested on IXDP425.
<sys/bootblock.h>:
* Added definitions for the Master Boot Record (MBR) used by
a variety of systems (primarily i386), including the format
of the BIOS Parameter Block (BPB).
This information was cribbed from a variety of sources
including <sys/disklabel_mbr.h> which this is a superset of.
As part of this, some data structure elements and #defines
were renamed to be more "namespace friendly" and consistent
with other bootblocks and MBR documentation.
Update all uses of the old names to the new names.
<sys/disklabel_mbr.h>:
* Deprecated in favor of <sys/bootblock.h> (the latter is more
"host tool" friendly).
amd64 & i386:
* Renamed /usr/mdec/bootxx_dosfs to /usr/mdec/bootxx_msdos, to
be consistent with the naming convention of the msdosfs tools.
* Removed /usr/mdec/bootxx_ufs, as it's equivalent to bootxx_ffsv1
and it's confusing to have two functionally equivalent bootblocks,
especially given that "ufs" has multiple meanings (it could be
a synonym for "ffs", or the group of ffs/lfs/ext2fs file systems).
* Rework pbr.S (the first sector of bootxx_*):
+ Ensure that BPB (bytes 11..89) and the partition table
(bytes 446..509) do not contain code.
+ Add support for booting from FAT partitions if BOOT_FROM_FAT
is defined. (Only set for bootxx_msdos).
+ Remove "dummy" partition 3; if people want to installboot(8)
these to the start of the disk they can use fdisk(8) to
create a real MBR partition table...
+ Compile with TERSE_ERROR so it fits because of the above.
Whilst this is less user friendly, I feel it's important
to have a valid partition table and BPB in the MBR/PBR.
* Renamed /usr/mdec/biosboot to /usr/mdec/boot, to be consistent
with other platforms.
* Enable SUPPORT_DOSFS in /usr/mdec/boot (stage2), so that
we can boot off FAT partitions.
* Crank version of /usr/mdec/boot to 3.1, and fix some of the other
entries in the version file.
installboot(8) (i386):
* Read the existing MBR of the filesystem and retain the BIOS
Parameter Block (BPB) in bytes 11..89 and the MBR partition
table in bytes 446..509. (Previously installboot(8) would
trash those two sections of the MBR.)
mbrlabel(8):
* Use sys/lib/libkern/xlat_mbr_fstype.c instead of homegrown code
to map the MBR partition type to the NetBSD disklabel type.
Test built "make release" for i386, and new bootblocks verified to work
(even off FAT!).
Right now the only flag is used to indicate if a ksiginfo_t is a
result of a trap. Add a predicate macro to test for this flag.
* Add initialization macros for ksiginfo_t's.
* Add accssor macro for ksi_trap. Expands to 0 if the ksiginfo_t was
not the result of a trap. This matches the sigcontext trapcode semantics.
* In kpsendsig(), use KSI_TRAP_P() to select the lwp that gets the signal.
Inspired by Matthias Drochner's fix to kpsendsig(), but correctly handles
the case of non-trap-generated signals that have a > 0 si_code.
This patch fixes a signal delivery problem with threaded programs noted by
Matthias Drochner on tech-kern.
As discussed on tech-kern. Reviewed and OK's by Christos.
interface controllers (of varying intelligence levels).
Contributed by Wasabi Systems, Inc. Primarily written by Steve Woodford,
with some modification by me.
(NOTE: "cvs ci" was missed on this directory during the initial checkin
of the new I2C code.)
which is automatically included during kernel config, and add comments
to individual machine-dependant majors.* files to assign new MI majors
in MI file.
Range 0-191 is reserved for machine-specific assignments, range
192+ are MI assignments.
Follows recent discussion on tech-kern@
interface controllers (of varying intelligence levels).
Contributed by Wasabi Systems, Inc. Primarily written by Steve Woodford,
with some modification by me.
but there are very small diffs in register definitions. For that, add
new options SSCOM_S3C{2800,2410,2400} and include appropriate
s3c*reg.h.
SSCOM_S3C2410 is also needed for interrupt controller differences.
The new code maintains two variables 'current_spl_level' and
'hardware_spl_level'. Variable hardware_spl_level reflects actual
priority level at the hardware's point of view. hardware_spl_level is
always synchronized to hardware.
splraise() just increases current_spl_level. splx() sets
current_spl_level. If (and only if) hardware_spl_level and
current_spl_level is not same, splx() synchronizes interrupt mask
register and hardware_spl_level to current_spl_level.
In most case, splraise() raises current_spl_level and splx() restores
only current_spl_level.
When an interrupt occurs, hardware_spl_level and interrupt mask
register are synchronized to current_spl_level.
In this implementation, during a higher priority interrupt handler is
running, lower priority interrupts never cause intr_dispatch() to run.
It will avoid some race condition.
config write with the device number specified in AD[15:11]. If
we don't set this field when issuing a Type 0 cycle, each device
could end of thinking it is at device 0, which can cause a number
of problems. Doing this unconditionally should be OK when only
PCI devices are present.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
the test as spl0 is actually a macro for splx(0). The code now calls
splx(0)
(note building with the #ifdef fixed, caused the build to fail on a
GENERIC acorn32 kernel.)
enabled on amd64). Add a dmat64 field to various PCI attach structures,
and pass it down where needed. Implement a simple new function called
pci_dma64_available(pa) to test if 64bit DMA addresses may be used.
This returns 1 iff _PCI_HAVE_DMA64 is defined in <machine/pci_machdep.h>,
and there is more than 4G of memory.
with a more generic "devmap" structure that can also handle mappings
made with large and small pages. Add new pmap routines to enter these
mappings during bootstrap (and "remember" the devmap), and routines to
look up the static mappings once the kernel is running.
child drivers such as interrupt and gpio controllers.
- Add a function to probe SDRAM size at boot time.
- Add a function to configure the Clock Manager's CKEN settings.
- Add an INTC driver.
- Add a GPIO driver.
- Add attach glue for the PXA2x0's "almost" 16550-compatible uarts.
- Tweak the LCD driver to use the GPIO driver's services for setting
up GPIO pin function.
to both the EEPROM *and* the PHY on the Ethernet interface now, at least,
though it is still not completely working.
Many thanks to Stephen Goadhouse at ADI for some hints.
scw