Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adjust the interface to match what has been done to the
TCGv_i32 load/store functions.
This is less obvious, because at present the only user of
these functions, trans_VLDST_multiple, also wants to manipulate
the endianness to speed up loading multiple bytes. Thus we
retain an "internal" interface which is identical to the
current gen_aa32_{ld,st}_i64 interface.
The "new" interface will gain users as we remove the legacy
interfaces, gen_aa32_ld64 and gen_aa32_st64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Just because operating on a TCGv_i64 temporary does not
mean that we're performing a 64-bit operation. Restrict
the frobbing to actual 64-bit operations.
This bug is not currently visible because all current
users of these two functions always pass MO_64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the only caller. Adjust some commentary to talk
about SCTLR_B instead of the vanishing function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a finalize_memop function that computes alignment and
endianness and returns the final MemOp for the operation.
Split out gen_aa32_{ld,st}_internal_i32 which bypasses any special
handling of endianness or alignment. Adjust gen_aa32_{ld,st}_i32
so that s->be_data is not added by the callers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use this to signal when memory access alignment is required.
This value comes from the CCR register for M-profile, and
from the SCTLR register for A-profile.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that other bits have been moved out of tb->flags,
there's no point in filling from the top.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that these bits have been moved out of tb->flags,
where TBFLAG_ANY was filling from the top, move AM32
to fill from the top, and A32 and M32 to fill from the
bottom. This means fewer changes when adding new bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have all of the proper macros defined, expanding
the CPUARMTBFlags structure and populating the two TB fields
is relatively simple.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for splitting tb->flags across multiple
fields, introduce a structure to hold the value(s).
So far this only migrates the one uint32_t and fixes
all of the places that require adjustment to match.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to split tbflags into two parts. These macros
will ensure that the correct part is used with the correct
set of bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to rearrange the macro expansion surrounding tbflags,
and this field name will be expanded using the bit definition of
the same name, resulting in a token pasting error.
So PSTATE_SS -> PSTATE__SS in the uses, and document it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to rearrange the macro expansion surrounding tbflags,
and this field name will be expanded using the bit definition of
the same name, resulting in a token pasting error.
So SCTLR_B -> SCTLR__B in the 3 uses, and document it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The encoding of size = 2 and size = 3 had the incorrect decode
for align, overlapping the stride field. This error was hidden
by what should have been unnecessary masking in translate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The log2_esize parameter is not used except trivially.
Drop the parameter and the deferral to gen_mte_check1.
This fixes a bug in that the parameters as documented
in the header file were the reverse from those in the
implementation. Which meant that translate-sve.c was
passing the parameters in the wrong order.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that mte_check1 and mte_checkN have been merged, we can
merge sve_cont_ldst_mte_check1 and sve_cont_ldst_mte_checkN.
Which means that we can eliminate the function pointer into
sve_ldN_r and sve_stN_r, calling sve_cont_ldst_mte_check directly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For consistency with the mte_check1 + mte_checkN merge
to mte_check, rename the probe function as well.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mte_check1 and mte_checkN functions are now identical.
Drop mte_check1 and rename mte_checkN to mte_check.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After recent changes, mte_checkN does not use ESIZE,
and mte_check1 never used TSIZE. We can combine the
two into a single field: SIZEM1.
Choose to pass size - 1 because size == 0 is never used,
our immediate need in mte_probe_int is for the address
of the last byte (ptr + size - 1), and since almost all
operations are powers of 2, this makes the immediate
constant one bit smaller.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly assuming that only the first byte of an MTE access
is checked against the tags. But per the ARM, unaligned accesses are
pre-decomposed into single-byte accesses. So by the time we reach the
actual MTE check in the ARM pseudocode, all accesses are aligned.
We cannot tell a priori whether or not a given scalar access is aligned,
therefore we must at least check. Use mte_probe_int, which is already
set up for checking multiple granules.
Buglink: https://bugs.launchpad.net/bugs/1921948
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out a helper function from mte_checkN to perform
all of the checking and address manpulation. So far,
just use this in mte_checkN itself.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly assuming that only the first byte of an MTE access
is checked against the tags. But per the ARM, unaligned accesses are
pre-decomposed into single-byte accesses. So by the time we reach the
actual MTE check in the ARM pseudocode, all accesses are aligned.
Therefore, the first failure is always either the first byte of the
access, or the first byte of the granule.
In addition, some of the arithmetic is off for last-first -> count.
This does not become directly visible until a later patch that passes
single bytes into this function, so ptr == ptr_last.
Buglink: https://bugs.launchpad.net/bugs/1921948
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked a comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Arm ARM specifies that for Thumb encodings of the various plain
store insns, if the Rn field is 1111 then we must UNDEF. This is
different from the Arm encodings, where this case is either
UNPREDICTABLE or has well-defined behaviour. The exclusive stores,
store-release and STRD do not have this UNDEF case for any encoding.
Enforce the UNDEF for this case in the Thumb plain store insns.
Fixes: https://bugs.launchpad.net/qemu/+bug/1922887
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210408162402.5822-1-peter.maydell@linaro.org
We can remove PAGE_WRITE when (internally) marking a page read-only
because it contains translated code. This can get confused when we are
executing signal return code on signal stacks.
Fixes: e56552cf07 ("target/s390x: Implement the MVPG condition-code-option bit")
Found-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-id: 20210422154427.13038-1-alex.bennee@linaro.org
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When adding this file and its new content in commit 3f7a927847
("target/mips: LSA/DLSA R6 decodetree helpers") I did 2 mistakes:
1: Listed authors who haven't been involved in its development,
2: Used an incorrect GNU GPLv2 license text (using 'and' instead
of 'or').
Instead of correcting the GNU GPLv2 license text, replace the license
by the 'GNU LGPL v2.1 or later' one, to be coherent with the other
translation files in the target/mips/ folder.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210420100633.1752440-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a left over erroneous check from the days front-ends handled
io start/end themselves. Regardless just because IO could be performed
on the last instruction doesn't obligate the front end to do so.
This fixes an abort faced by the aspeed execute-in-place support which
will necessarily trigger this state (even before the one-shot
CF_LAST_IO fix). The test still seems to hang once it attempts to boot
the Linux kernel but I suspect this is an unrelated issue with icount
and the timer handling code.
The original intention of the cpu_abort (added in commit 2e70f6efa8
when the icount stuff was first added) seems to have been to act as
an assert() to catch an unhandled corner case where the generated code
would be something like:
conditional branch to condlabel if its cc failed
implementation of the insn (a conditional branch or trap)
code emitted by gen_io_end()
condlabel:
gen_goto_tb or equivalent thing to go to next insn
At runtime the cc-failed case would skip over the code emitted by
gen_io_end(), leaving the can_do_io flag incorrectly set.
In commit ba3e792669 we switched to an implementation which
always clears can_do_io at the start of the following TB instead
of trying to clear it at the end of a TB that did IO. So the corner
case that this cpu_abort() was trying to flag is no longer possible,
because the gen_io_end() call has been deleted. We can therefore
safely remove the no-longer-valid assertion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210416170207.12504-1-alex.bennee@linaro.org
Cc: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a TCG temporary leak when translating CACHE opcode.
Fixes: 0d74a222c2 ("make ITC Configuration Tags accessible to the CPU")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210406202857.1440744-1-f4bug@amsat.org>
We can remove PAGE_WRITE when (internally) marking a page
read-only because it contains translated code.
This can be triggered by tests/tcg/aarch64/bti-2, after
having serviced SIGILL trampolines on the stack.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Found the following cpu feature bits missing from EPYC-Rome model.
ibrs : Indirect Branch Restricted Speculation
ssbd : Speculative Store Bypass Disable
These new features will be added in EPYC-Rome-v2. The -cpu help output
after the change.
x86 EPYC-Rome (alias configured by machine type)
x86 EPYC-Rome-v1 AMD EPYC-Rome Processor
x86 EPYC-Rome-v2 AMD EPYC-Rome Processor
Reported-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <161478622280.16275.6399866734509127420.stgit@bmoger-ubuntu>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit f7fb73b8cd.
This change turned out to be a bit half-baked, and doesn't
work with KVM, which fails with the error:
"qemu-system-aarch64: Failed to retrieve host CPU features"
because KVM does not allow accessing of the PMCR_EL0 value in
the scratch "query CPU ID registers" VM unless we have first
set the KVM_ARM_VCPU_PMU_V3 feature on the VM.
Revert the change for 6.0.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20210331154822.23332-1-peter.maydell@linaro.org
This patch handles icount mode for timer read/write instructions,
because it is required to call gen_io_start in such cases.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <161700373035.1135822.16451510827008616793.stgit@pasha-ThinkPad-X280>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
xtensa_modules variable defined in each xtensa-modules.c.inc is only
used locally by the including file. Make it static.
Reported-by: Yury Gribov <tetra2005@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
import_core.sh tries to change Makefile.objs when importing new xtensa
core, but that file no longer exists. Rewrite meson.build rule to pick
up all source files that match core-*.c pattern and drop commands that
change Makefile.objs.
Cc: qemu-stable@nongnu.org # v5.2.0
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Python scripts are not inputs, and putting them in @INPUT@. This
puts requirements on the command line format, keeping all inputs
close to the name of the script. Avoid that by not including the
script in the command and not in the inputs.
Also wrap "PYTHONPATH" usage with "env", since setting the environment
this way is not valid under Windows.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_semantics is an executable, not an input. Meson 0.57 special cases
the first argument and @INPUT@ is not expanded there. Fix that by
not including it in the input, only in the command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds icount handling to mfspr/mtspr instructions
that may deal with hardware timers.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Message-Id: <161700376169.1135890.8707223959310729949.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stafford Horne <shorne@gmail.com>
These two opcodes only allow a memory operand.
Lacking the check for a register operand, we used the A0 temp
without initialization, which led to a tcg abort.
Buglink: https://bugs.launchpad.net/qemu/+bug/1921138
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210324164650.128608-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Each vCPU core exposes its timebase frequency in the DT. When running
under KVM, this means parsing /proc/cpuinfo in order to get the timebase
frequency of the host CPU.
The parsing appears to slow down the boot quite a bit with higher number
of cores:
# of cores seconds spent in spapr_dt_cpus()
8 0.550122
16 1.342375
32 2.850316
64 5.922505
96 9.109224
128 12.245504
256 24.957236
384 37.389113
The timebase frequency of the host CPU is identical for all
cores and it is an invariant for the VM lifetime. Cache it
instead of doing the same expensive parsing again and again.
Rename kvmppc_get_tbfreq() to kvmppc_get_tbfreq_procfs() and
rename the 'retval' variable to make it clear it is used as
fallback only. Come up with a new version of kvmppc_get_tbfreq()
that calls kvmppc_get_tbfreq_procfs() only once and keep the
value in a static.
Zero is certainly not a valid value for the timebase frequency.
Treat atoi() returning zero as another parsing error and return
the fallback value instead. This allows kvmppc_get_tbfreq() to
use zero as an indicator that kvmppc_get_tbfreq_procfs() hasn't
been called yet.
With this patch applied:
384 0.518382
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <161600382766.1780699.6787739229984093959.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently we give all the v7-and-up CPUs a PMU with 4 counters. This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.
Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.
This means that we now supply 6 counters for Cortex-A53, A57, A72,
A15 and A9 as well as '-cpu max'; Cortex-A7 and A8 stay at 4; and
Cortex-R5 goes down to 3.
Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset. This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20210311165947.27470-1-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The definition S390_ADAPTER_SUPPRESSIBLE was moved to "cpu.h", per
suggestion of Thomas Huth. From interface design perspective, IMHO, not
a good thing as it belongs to the public interface of
css_register_io_adapters(). We did this because CONFIG_KVM requeires
NEED_CPU_H and Thomas, and other commenters did not like the
consequences of that.
Moving the interrupt related declarations to s390_flic.h was suggested
by Cornelia Huck.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20210317095622.2839895-2-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pretend the fault always happens at page table level 3.
Failure to set this leaves level = 0, which is impossible for
ARMFault_Permission, and produces an invalid syndrome, which
reaches g_assert_not_reached in cpu_loop.
Fixes: 8db94ab4e5 ("linux-user/aarch64: Pass syndrome to EXC_*_ABORT")
Reported-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210320000606.1788699-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For Arm M-profile CPUs, on reset the CPU must load its initial PC and
SP from a vector table in guest memory. Because we can't guarantee
reset ordering, we have to handle the possibility that the ROM blob
loader's reset function has not yet run when the CPU resets, in which
case the data in an ELF file specified by the user won't be in guest
memory to be read yet.
We work around the reset ordering problem by checking whether the ROM
blob loader has any data for the address where the vector table is,
using rom_ptr(). Unfortunately this does not handle the possibility
of memory aliasing. For many M-profile boards, memory can be
accessed via multiple possible physical addresses; if the board has
the vector table at address X but the user's ELF file loads data via
a different address Y which is an alias to the same underlying guest
RAM then rom_ptr() will not find it.
Use the new rom_ptr_for_as() function, which deals with memory
aliasing when locating a relevant ROM blob.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210318174823.18066-6-peter.maydell@linaro.org
When decode_insn16() fails, we fall back to decode_RV32_64C() for
further compressed instruction decoding. However, prior to this change,
we did not raise an illegal instruction exception, if decode_RV32_64C()
fails to decode the instruction. This means that we skipped illegal
compressed instructions instead of raising an illegal instruction
exception.
Instead of patching decode_RV32_64C(), we can just remove it,
as it is dead code since f330433b36 anyway.
Signed-off-by: Georg Kotheimer <georg.kotheimer@kernkonzept.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210322121609.3097928-1-georg.kotheimer@kernkonzept.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current two-stage lookup detection in riscv_cpu_do_interrupt falls
short of its purpose, as all it checks is whether two-stage address
translation either via the hypervisor-load store instructions or the
MPRV feature would be allowed.
What we really need instead is whether two-stage address translation was
active when the exception was raised. However, in riscv_cpu_do_interrupt
we do not have the information to reliably detect this. Therefore, when
we raise a memory fault exception we have to record whether two-stage
address translation is active.
Signed-off-by: Georg Kotheimer <georg.kotheimer@kernkonzept.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210319141459.1196741-1-georg.kotheimer@kernkonzept.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The previous implementation was broken in many ways:
- Used mideleg instead of hideleg to mask accesses
- Used MIP_VSSIP instead of VS_MODE_INTERRUPTS to mask writes to vsie
- Did not shift between S bits and VS bits (VSEIP <-> SEIP, ...)
Signed-off-by: Georg Kotheimer <georg.kotheimer@kernkonzept.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210311094738.1376795-1-georg.kotheimer@kernkonzept.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current condition for the use of background registers only
considers the hypervisor load and store instructions,
but not accesses from M mode via MSTATUS_MPRV+MPV.
Signed-off-by: Georg Kotheimer <georg.kotheimer@kernkonzept.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210311103036.1401073-1-georg.kotheimer@kernkonzept.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Georg Kotheimer <georg.kotheimer@kernkonzept.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210311094902.1377593-1-georg.kotheimer@kernkonzept.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to the specification the "field SPVP of hstatus controls the
privilege level of the access" for the hypervisor virtual-machine load
and store instructions HLV, HLVX and HSV.
Signed-off-by: Georg Kotheimer <georg.kotheimer@kernkonzept.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210311103005.1400718-1-georg.kotheimer@kernkonzept.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If PMP permission of any address has been changed by updating PMP entry,
flush all TLB pages to prevent from getting old permission.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1613916082-19528-4-git-send-email-cwshu@andestech.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Like MMU translation, add qemu log of PMP permission checking for
debugging.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1613916082-19528-3-git-send-email-cwshu@andestech.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, PMP permission checking of TLB page is bypassed if TLB hits
Fix it by propagating PMP permission to TLB page permission.
PMP permission checking also use MMU-style API to change TLB permission
and size.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1613916082-19528-2-git-send-email-cwshu@andestech.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vs() should return -RISCV_EXCP_ILLEGAL_INST instead of -1 if rvv feature
is not enabled.
If -1 is returned, exception will be raised and cs->exception_index will
be set to the negative return value. The exception will then be treated
as an instruction access fault instead of illegal instruction fault.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210223065935.20208-1-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Coverity reported (CID 1450831) an array overrun in
gen_mxu_D16MAX_D16MIN():
1103 } else if (unlikely((XRb == 0) || (XRa == 0))) {
....
1112 if (opc == OPC_MXU_D16MAX) {
1113 tcg_gen_smax_i32(mxu_gpr[XRa - 1], t0, t1);
1114 } else {
1115 tcg_gen_smin_i32(mxu_gpr[XRa - 1], t0, t1);
1116 }
>>> Overrunning array "mxu_gpr" of 15 8-byte elements at element
index 4294967295 (byte offset 34359738367) using index "XRa - 1U"
(which evaluates to 4294967295).
This happens because the code is confused about which of XRa, XRb and
XRc is the output, and which are the inputs. XRa is the output, but
most of the conditions separating out different special cases are
written as if XRc is the output, with the result that we can end up
in the code path that assumes XRa is non-0 even when it is zero.
Fix the erroneous code, bringing it in to line with the structure
used in functions like gen_mxu_S32MAX_S32MIN() and
gen_mxu_Q8MAX_Q8MIN().
Fixes: CID 1450831
Fixes: bb84cbf385
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210316131353.4533-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
KVM doesn't fully support Hyper-V reenlightenment notifications on
migration. In particular, it doesn't support emulating TSC frequency
of the source host by trapping all TSC accesses so unless TSC scaling
is supported on the destination host and KVM_SET_TSC_KHZ succeeds, it
is unsafe to proceed with migration.
KVM_SET_TSC_KHZ is called from two sites: kvm_arch_init_vcpu() and
kvm_arch_put_registers(). The later (intentionally) doesn't propagate
errors allowing migrations to succeed even when TSC scaling is not
supported on the destination. This doesn't suit 're-enlightenment'
use-case as we have to guarantee that TSC frequency stays constant.
Require 'tsc-frequency=' command line option to be specified for successful
migration when re-enlightenment was enabled by the guest.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210319123801.1111090-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even the name of this section is 'cpu/msr_hyperv_hypercall',
'hypercall_hypercall' is clearly a typo.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210318160249.1084178-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
env->error_code is only 32-bits wide, so the high 32 bits of EXITINFO1
are being lost. However, even though saving guest state and restoring
host state must be delayed to do_vmexit, because they might take tb_lock,
it is always possible to write to the VMCB. So do this for the exit
code and EXITINFO1, just like it is already being done for EXITINFO2.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- get rid of legacy_s390_alloc() and phys_mem_set_alloc()
- tcg: implement the MVPG condition-code-option bit
- fix g_autofree variable handing in the pci vfio code
- use official z15 names in the cpu model definitions
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAmBQgqUSHGNvaHVja0By
ZWRoYXQuY29tAAoJEN7Pa5PG8C+vwOkP/3K5y38/8v3VSoOxFbpTvAqSDBtHtCpz
bDIfqFmLenniFKRuGWr/rAUCbFCSymhoy3YNuWXa2wX4WVjOEx3wRCxkShC1/G5B
PBu75UmB58CivL5agHigA0r1JSwquqFfzTr+mU9GAyf5aUJj3iGqX1rx+Ldyeva1
bdSxOY8LZVuM52E5QvDFzjOCw0Ti83yje7OdPuz4FixaXoyZzNEB50E3hxgJPIYE
khHAP1LaxmOGqfCuCBYOkFOUVx3xXnevnNouP2l98fBMa8ctu1JrsEz/9WA7mbDF
1rYDtEE2l4eqWlXkMX1LcSV1eJ5rlf1l/W4uyW9Ti6gi30dZuOJnrfviP2bBPjQE
VrGsmIg35PhP9y7y8ZlBJHgxENw3qrlJ2I1R/IIjivN84EZ9OkxaW6pMt0R+1Q1o
tQAh9/2Md9IHsvZEZMTppIuRn0X0Y4Wfm3/9vY1twrrZFPzc5cSsFhrDam0KRGro
PgnsJ3b1aeKW7k9fS0hy807SKV5stdmTCAGPoP5RYXRIQhuUsaFXN04w+PuIUY7m
kd2IRKrubcWhmSnTELBO97lTmLMCb5vyOX6iKbTbbQ0kg68qB8tna7WlfvfxpH5a
NFk6yvJiygmedX4TaIMxvJt6ZIWNSksCaJWsAb72oySXsbcu5vewMRUs4/4kAtJj
gMwEILszb60S
=8eNE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210316' into staging
s390x updates:
- get rid of legacy_s390_alloc() and phys_mem_set_alloc()
- tcg: implement the MVPG condition-code-option bit
- fix g_autofree variable handing in the pci vfio code
- use official z15 names in the cpu model definitions
# gpg: Signature made Tue 16 Mar 2021 10:04:21 GMT
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20210316:
s390x/pci: Add missing initialization for g_autofree variables
target/s390x: Store r1/r2 for page-translation exceptions during MVPG
target/s390x: Implement the MVPG condition-code-option bit
s390x/cpu_model: use official name for 8562
exec: Get rid of phys_mem_set_alloc()
s390x/kvm: Get rid of legacy_s390_alloc()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PoP states:
When EDAT-1 does not apply, and a program interruption due to a
page-translation exception is recognized by the MOVE PAGE
instruction, the contents of the R1 field of the instruction are
stored in bit positions 0-3 of location 162, and the contents of
the R2 field are stored in bit positions 4-7.
If [...] an ASCE-type, region-first-translation,
region-second-translation, region-third-translation, or
segment-translation exception was recognized, the contents of
location 162 are unpredictable.
So we have to write r1/r2 into the lowcore on page-translation
exceptions. Simply handle all exceptions inside our mvpg helper now.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210315085449.34676-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If the CCO bit is set, MVPG should not generate an exception but
report page translation faults via a CC code.
Create a new helper, access_prepare_nf, which can use probe_access_flags
in non-faulting mode, and then handle watchpoints.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[thuth: Added logic to still inject protection exceptions]
Signed-off-by: Thomas Huth <thuth@redhat.com>
[david: Look at env->tlb_fill_exc to determine if there was an exception]
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210315085449.34676-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The single-frame z15 is called "z15 T02" (and the multi-frame z15
"z15 T01").
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210311132746.1777754-1-cohuck@redhat.com>
legacy_s390_alloc() was required for dealing with the absence of the ESOP
feature -- on old HW (< gen 10) and old z/VM versions (< 6.3).
As z/VM v6.2 (and even v6.3) is no longer supported since 2017 [1]
and we don't expect to have real users on such old hardware, let's drop
legacy_s390_alloc().
Still check+report an error just in case someone still runs on
such old z/VM environments, or someone runs under weird nested KVM
setups (where we can manually disable ESOP via the CPU model).
No need to check for KVM_CAP_GMAP - that should always be around on
kernels that also have KVM_CAP_DEVICE_CTRL (>= v3.15).
[1] https://www.ibm.com/support/lifecycle/search?q=z%2FVM
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210303130916.22553-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Only one interrupt is in progress at the moment.
It is only necessary to set to reset interrupt_request
after all interrupts have been executed.
Signed-off-by: Ivanov Arkasha <ivanovrkasha@gmail.com>
Message-Id: <20210312164754.18437-1-arkaisp2021@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
I found that there are many spelling errors in the comments of qemu/target/avr.
I used spellcheck to check the spelling errors and found some errors in the folder.
Signed-off-by: Lichang Zhao <zhaolichang@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daude<f4bug@amsat.org>
Message-Id: <20201009064449.2336-12-zhaolichang@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
if width was 0 we would run into the assertion:
qemu-system-tricore: tcg/tcg-op.c:217: tcg_gen_sari_i32: Assertion `arg2 >= 0 && arg2 < 32' failed.o
The instruction manual specifies undefined behaviour for this case. So
we bring this in line with the golden Infineon simlator 'tsim', which
simply writes 0 to the result in case of width=0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
if r3+1 and r2 are the same then we would overwrite r2 with our first
move and use the wrong result for the shift. Thus we store the result
from the mov in a temp.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
According to the TC 1.3.1. Architecture Manual [1; page 174], results are
undefined, if pos + width > 32 and not 31 or if width = 0.
We found this error because of a different behavior between qemu-tricore
and the real tricore processor. For pos + width = 32, qemu-tricore did not
generate any intermediate code and ran into a different state compared to
the real hardware.
[1] https://www.infineon.com/dgdl/tc_v131_instructionset_v138.pdf?fileId=db3a304412b407950112b409b6dd0352
[BK: Add the why to the commit message]
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Andreas Konopik <andreas.konopik@efs-auto.de>
Signed-off-by: Georg Hofstetter <georg.hofstetter@efs-auto.de>
Signed-off-by: David Brenken <david.brenken@efs-auto.de>
Message-Id: <20210211115329.8984-2-david.brenken@efs-auto.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
'int access_type' and ACCESS_INT are unused, drop them.
Provide the mmu_idx argument to match other targets.
'int rw' is actually the MMUAccessType, rename it.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210127224255.3505711-3-f4bug@amsat.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
This comment describing the tx79 opcodes is helpful. As we
will implement these instructions in tx79_translate.c, move
the comment there.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-15-f4bug@amsat.org>
We have almost 400 lines of code full of /* TODO */ comments
which end calling gen_reserved_instruction().
As we are not going to implement them, and all the caller's
switch() default cases already call gen_reserved_instruction(),
we can remove this altogether.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-14-f4bug@amsat.org>
Simplify the PCPYH (Parallel Copy Halfword) instruction by using
multiple calls to deposit_i64() which can be optimized by some
TCG backends.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-11-f4bug@amsat.org>
We will use gen_rdhwr() outside of translate.c, make it public.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-28-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-10-f4bug@amsat.org>
Introduce decodetree structure to decode the tx79 opcodes.
Start it by moving the existing MFHI1 and MFLO1 opcodes.
Remove unnecessary comments.
As the TX79 share opcodes with the TX19/TX39/TX49 CPUs,
we introduce the decode_ext_txx9() dispatcher where we
will add the other decoders later.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-9-f4bug@amsat.org>
Extract 1600+ lines from the big translate.c into a new file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-14-f4bug@amsat.org>
Extract the MXU register initialization code from mips_tcg_init()
as a new mxu_translate_init() helper. Make it public and replace
!TARGET_MIPS64 ifdef'ry by the 'TARGET_LONG_BITS == 32' check to
elide this code at preprocessing time.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-13-f4bug@amsat.org>
By making the prototype public and checking
'TARGET_LONG_BITS == 32' we let the compiler
elide the decode_opc_mxu() call.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-12-f4bug@amsat.org>
To easily convert MXU code to decodetree, making it return a boolean.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-11-f4bug@amsat.org>
Use "decode_{isa,ase,ext}_$name()" function name pattern for
public decodetree entrypoints.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-10-f4bug@amsat.org>
Move the check for MUL opcode from decode_opc_mxu() callee
to decode_opc_legacy() caller, so we can simplify the ifdef'ry
and elide the call in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-9-f4bug@amsat.org>
We already have a macro and definition to extract / check
the Special2 MUL opcode. Use it instead of the unnecessary
OPC__MXU_MUL macro.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-8-f4bug@amsat.org>
In the next commit we'll make decode_opc_mxu() match decodetree
prototype by returning a boolean. First pass ctx->opcode as an
argument.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-7-f4bug@amsat.org>
None of these MXU functions use their CPUMIPSState* env argument,
remove it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-6-f4bug@amsat.org>
All these unimplemented MXU opcodes end up calling
gen_reserved_instruction() which is the default switch
case in decode_opc_mxu().
The translate.c file is already big enough and hard to maintain,
remove 1300 lines of unnecessary code and /* TODO */ comments.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-5-f4bug@amsat.org>
No need for this obfuscated ifdef'ry, KISS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-4-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-3-f4bug@amsat.org>
Introduce the 'mips_tcg' source set to collect TCG specific files.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-2-f4bug@amsat.org>
The virt machine already checks KVM_CAP_ARM_VM_IPA_SIZE to get the
upper bound of the IPA size. If that bound is lower than the highest
possible GPA for the machine, then QEMU will error out. However, the
IPA is set to 40 when the highest GPA is less than or equal to 40,
even when KVM may support an IPA limit as low as 32. This means KVM
may fail the VM creation unnecessarily. Additionally, 40 is selected
with the value 0, which means use the default, and that gets around
a check in some versions of KVM, causing a difficult to debug fail.
Always use the IPA size that corresponds to the highest possible GPA,
unless it's lower than 32, in which case use 32. Also, we must still
use 0 when KVM only supports the legacy fixed 40 bit IPA.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Message-id: 20210310135218.255205-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the reduction operations, we intentionally increase maxsz to
the next power of 2, so as to fill out the reduction tree correctly.
Since e2e7168a21, oprsz must equal maxsz, with exceptions for small
vectors, so this triggers an assertion for vector sizes > 32 that are
not themselves a power of 2.
Pass the power-of-two value in the simd_data field instead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wrote too much with punpk1 with vl % 512 != 0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wrote too much with low-half zip (zip1) with vl % 512 != 0.
Adjust all of the x + (y << s) to x | (y << s) as a style fix.
We only ever have exact overlap between D, M, and N. Therefore
we only need a single temporary, and we do not need to check for
partial overlap.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Missed out on compressing the second half of a predicate
with length vl % 512 > 256.
Adjust all of the x + (y << s) to x | (y << s) as a
general style fix. Drop the extract64 because the input
uint64_t are known to be already zero-extended from the
current size of the predicate.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Next batch of patches for the ppc target and machine types. Includes:
* Several cleanups for sm501 from Peter Maydell
* An update to the SLOF guest firmware
* Improved handling of hotplug failures in spapr, associated cleanups
to the hotplug handling code
* Several etsec fixes and cleanups from Bin Meng
* Assorted other fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=/uyx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' into staging
ppc patch queue for 2021-03-10
Next batch of patches for the ppc target and machine types. Includes:
* Several cleanups for sm501 from Peter Maydell
* An update to the SLOF guest firmware
* Improved handling of hotplug failures in spapr, associated cleanups
to the hotplug handling code
* Several etsec fixes and cleanups from Bin Meng
* Assorted other fixes and cleanups
# gpg: Signature made Wed 10 Mar 2021 04:08:53 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-6.0-20210310:
spapr.c: send QAPI event when memory hotunplug fails
spapr.c: remove duplicated assert in spapr_memory_unplug_request()
target/ppc: fix icount support on Book-e vms accessing SPRs
qemu_timer.c: add timer_deadline_ms() helper
spapr_pci.c: add 'unplug already in progress' message for PCI unplug
spapr.c: add 'unplug already in progress' message for PHB unplug
hw/ppc: e500: Add missing <ranges> in the eTSEC node
hw/net: fsl_etsec: Fix build error when HEX_DUMP is on
spapr_drc.c: use DRC reconfiguration to cleanup DIMM unplug state
spapr_drc.c: add hotunplug timeout for CPUs
spapr_drc.c: introduce unplug_timeout_timer
target/ppc: Fix bcdsub. emulation when result overflows
docs/system: Extend PPC section
spapr: rename spapr_drc_detach() to spapr_drc_unplug_request()
spapr_drc.c: use spapr_drc_release() in isolate_physical/set_unusable
pseries: Update SLOF firmware image
spapr_drc.c: do not call spapr_drc_detach() in drc_isolate_logical()
hw/display/sm501: Inline template header into C file
hw/display/sm501: Expand out macros in template header
hw/display/sm501: Remove dead code for non-32-bit RGB surfaces
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the M68040UM Appendix D the requirement for data accesses to be
word aligned is only for the 68000, 68008 and 68010 CPUs. Later CPUs from the
68020 onwards will allow unaligned data accesses but at the cost of being less
efficient.
Add a new M68K_FEATURE_UNALIGNED_DATA feature to specify that data accesses are
not required to be word aligned, and don't perform the alignment on the stack
pointer when taking an exception if this feature is not selected.
This is required because the MacOS DAFB driver attempts to call an A-trap
with a byte-aligned stack pointer during initialisation and without this the
stack pointer is off by one when the A-trap returns.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210308121155.2476-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Move the feature comment from after the feature name to the preceding line to
allow for longer feature names and descriptions without hitting the 80
character line limit.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210308121155.2476-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If a NuBus slot doesn't contain a card, the Quadra hardware generates a physical
bus error if the CPU attempts to access the slot address space. Both Linux and
MacOS use a separate bus error handler during NuBus accesses in order to detect
and recover when addressing empty slots.
According to the MC68040 users manual the ATC bit of the SSW is used to
distinguish between ATC faults and physical bus errors. MacOS specifically checks
the stack frame generated by a NuBus error and panics if the SSW ATC bit is set.
Update m68k_cpu_transaction_failed() so that the SSW ATC bit is not set if the
memory API returns MEMTX_DECODE_ERROR which will be used to indicate that an
access to an empty NuBus slot occurred.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210308121155.2476-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is needed to boot MacOS ROM.
Pull the condition code and the program counter from the stack.
Operation:
(SP) -> CCR
SP + 2 -> SP
(SP) -> PC
SP + 4 -> SP
This operation is not privileged.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210307212552.523552-1-laurent@vivier.eu>
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmBI50MACgkQ+9DbCVqe
KkSyKggAhPZW+7sReVEsFdnVfwuo3evW7auoW44mghNbikTnm3RfoahYTrek8lGZ
AEo2gFMbzENW0j88e0OvSYYtwkVz3sD68bygfXerti6sQwWlwkf42I/suWjJNLph
oVKGEEdJess9+zR13Cu6RAq5RaTwzDPGPjUwTbeJPpAps4+UZV3hsxhaxs8keII6
GBa/idnh0qEApP2NDLKiSASrYZM7xGvljE7zO4qhchd6iSH/o5rCtkoB2tRCcXGo
+KF8LyBsUNf7GiWp0yYZMZUQ3Pqskqma8N3d2A4UlS1kXvxeX/FiORkG/Ne8bH1Z
VZ1Z/xbyXGlVkiP1bcoYSc6XWHNDTw==
=R9zQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging
Testing, guest-loader and other misc tweaks
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
# gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2:
semihosting: Move hw/semihosting/ -> semihosting/
semihosting: Move include/hw/semihosting/ -> include/semihosting/
tests/avocado: add boot_xen tests
docs: add some documentation for the guest-loader
docs: move generic-loader documentation into the main manual
hw/core: implement a guest-loader to support static hypervisor guests
device_tree: add qemu_fdt_setprop_string_array helper
hw/riscv: migrate fdt field to generic MachineState
hw/board: promote fdt from ARM VirtMachineState to MachineState
.editorconfig: update the automatic mode setting for Emacs
tests/docker: Use --arch-only when building Debian cross image
gitlab-ci.yml: Add jobs to test CFI flags
gitlab-ci.yml: Allow custom # of parallel linkers
tests/docker: add a test-tcg for building then running check-tcg
docs/system: add a gentle prompt for the complexity to come
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to move the semihosting code out of hw/ in the next patch.
This patch contains the mechanical steps, created using:
$ git mv include/hw/semihosting/ include/
$ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210226131356.3964782-2-f4bug@amsat.org>
Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
* Add new mps3-an547 board
* target/arm: Restrict v7A TCG cpus to TCG accel
* Implement a Xilinx CSU DMA model
* hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
-----BEGIN PGP SIGNATURE-----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=Qu2a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210310' into staging
target-arm queue:
* Add new mps3-an547 board
* target/arm: Restrict v7A TCG cpus to TCG accel
* Implement a Xilinx CSU DMA model
* hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
# gpg: Signature made Wed 10 Mar 2021 13:56:20 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210310: (54 commits)
hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_
hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips
hw/ssi: xilinx_spips: Clean up coding convention issues
hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI
hw/arm: xlnx-zynqmp: Clean up coding convention issues
hw/dma: Implement a Xilinx CSU DMA model
target/arm: Restrict v7A TCG cpus to TCG accel
tests/qtest/sse-timer-test: Test counter scaling changes
tests/qtest/sse-timer-test: Test the system timer
tests/qtest/sse-timer-test: Add simple test of the SSE counter
docs/system/arm/mps2.rst: Document the new mps3-an547 board
hw/arm/mps2-tz: Add new mps3-an547 board
hw/arm/mps2-tz: Make initsvtor0 setting board-specific
hw/arm/mps2-tz: Support running APB peripherals on different clock
hw/misc/mps2-scc: Implement changes for AN547
hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register
hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate
hw/arm/mps2-tz: Make UART overflow IRQ board-specific
hw/arm/armsse: Add SSE-300 support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Failing to guard SPR access with gen_io_start/gen_stop_exception
causes "Bad icount read" exceptions when running VMs with
e500mc and e500v2 CPUs with an icount parameter.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Greg Kurz <groug@kaod.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru>
Message-Id: <20210303140851.78383-1-cheptsov@ispras.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The commit d03b174a83 (target/ppc: simplify bcdadd/sub functions)
meant to simplify some of the code but it inadvertently altered the
way the CR6 field is set after the operation has overflowed.
The CR6 bits are set based on the *unbounded* result of the operation,
so we need to look at the result before returning from bcd_add_mag,
otherwise we will look at 0 when it overflows.
Consider the following subtraction:
v0 = 0x9999999999999999999999999999999c (maximum positive BCD value)
v1 = 0x0000000000000000000000000000001d (negative one BCD value)
bcdsub. v0,v0,v1,0
The Power ISA 2.07B says:
If the unbounded result is greater than zero, do the following.
If PS=0, the sign code of the result is set to 0b1100.
If PS=1, the sign code of the result is set to 0b1111.
If the operation overflows, CR field 6 is set to 0b0101. Otherwise,
CR field 6 is set to 0b0100.
POWER9 hardware:
vr0 = 0x0000000000000000000000000000000c (positive zero BCD value)
cr6 = 0b0101 (0x5) (positive, overflow)
QEMU:
vr0 = 0x0000000000000000000000000000000c (positive zero BCD value)
cr6 = 0b0011 (0x3) (zero, overflow) <--- wrong
This patch reverts the part of d03b174a83 that introduced the
problem and adds a test-case to avoid further regressions:
before:
$ make run-tcg-tests-ppc64le-linux-user
(...)
TEST bcdsub on ppc64le
bcdsub: qemu/tests/tcg/ppc64le/bcdsub.c:58: test_bcdsub_gt:
Assertion `(cr >> 4) == ((1 << 2) | (1 << 0))' failed.
Fixes: d03b174a83 (target/ppc: simplify bcdadd/sub functions)
Reported-by: Paul Clarke <pc@us.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210222194035.2723056-1-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
An assorted set of spelling fixes in various places.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TILE-Gx was only implemented in linux-user mode, but support for this CPU
was removed from the upstream Linux kernel in 2018, and it has also been
dropped from glibc, so there is no new Linux development taking place with
this architecture. For running the old binaries, users can simply use older
versions of QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210224183952.80463-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There are 23 files that include the "sysemu/qtest.h",
but they do not use any qtest functions.
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210226081414.205946-1-kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
KVM requires the target cpu to be at least ARMv8 architecture
(support on ARMv7 has been dropped in commit 82bf7ae84c:
"target/arm: Remove KVM support for 32-bit Arm hosts").
A KVM-only build won't be able to run TCG cpus, move the
v7A CPU definitions to cpu_tcg.c.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210306151801.2388182-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Clock framework allows users to specify a callback which is
called after the clock's period has been updated. Some users need to
also have a callback which is called before the clock period is
updated.
As the first step in adding support for notifying Clock users on
pre-update events, add an argument to the ClockCallback to specify
what event is being notified, and add an argument to the various
functions for registering a callback to specify which events are
of interest to that callback.
Note that the documentation update renders correct the previously
incorrect claim in 'Adding a new clock' that callbacks "will be
explained in a following section".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-2-peter.maydell@linaro.org
* sbsa-ref: remove cortex-a53 from list of supported cpus
* sbsa-ref: add 'max' to list of allowed cpus
* target/arm: Add support for FEAT_SSBS, Speculative Store Bypass Safe
* npcm7xx: add EMC model
* xlnx-zynqmp: Remove obsolete 'has_rpu' property
* target/arm: Speed up aarch64 TBL/TBX
* virtio-mmio: improve virtio-mmio get_dev_path alog
* target/arm: Use TCF0 and TFSRE0 for unprivileged tag checks
* target/arm: Restrict v8M IDAU to TCG
* target/arm/cpu: Update coding style to make checkpatch.pl happy
* musicpal, tc6393xb, omap_lcdc, tcx: drop dead code for non-32-bit-RGB surfaces
* Add new board: mps3-an524
-----BEGIN PGP SIGNATURE-----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=nphT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210308' into staging
target-arm queue:
* sbsa-ref: remove cortex-a53 from list of supported cpus
* sbsa-ref: add 'max' to list of allowed cpus
* target/arm: Add support for FEAT_SSBS, Speculative Store Bypass Safe
* npcm7xx: add EMC model
* xlnx-zynqmp: Remove obsolete 'has_rpu' property
* target/arm: Speed up aarch64 TBL/TBX
* virtio-mmio: improve virtio-mmio get_dev_path alog
* target/arm: Use TCF0 and TFSRE0 for unprivileged tag checks
* target/arm: Restrict v8M IDAU to TCG
* target/arm/cpu: Update coding style to make checkpatch.pl happy
* musicpal, tc6393xb, omap_lcdc, tcx: drop dead code for non-32-bit-RGB surfaces
* Add new board: mps3-an524
# gpg: Signature made Mon 08 Mar 2021 11:56:24 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210308: (49 commits)
hw/arm/mps2: Update old infocenter.arm.com URLs
docs/system/arm/mps2.rst: Document the new mps3-an524 board
hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524
hw/arm/mps2-tz: Stub out USB controller for mps3-an524
hw/arm/mps2-tz: Add new mps3-an524 board
hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo
hw/arm/mps2-tz: Support ROMs as well as RAMs
hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data
hw/arm/mps2-tz: Make RAM arrangement board-specific
hw/arm/mps2-tz: Allow boards to have different PPCInfo data
hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs
hw/arm/mps2-tz: Move device IRQ info to data structures
hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts
hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI
hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524
hw/arm/mps2-tz: Make number of IRQs board-specific
hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board type
hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board
hw/misc/mps2-fpgaio: Support SWITCH register
hw/misc/mps2-fpgaio: Make number of LEDs configurable by board
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a trivial incorrect usage of variable argument macros detected
by Coverity (missing_va_end: va_end was not called for ap).
Fixes: Coverity CID 1446720 (VARARGS)
Fixes: e3c00c2ed7 ("Hexagon (target/hexagon) opcode data structures")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20210223111253.2831285-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove these confusing and unused definitions.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210127232151.3523581-6-f4bug@amsat.org>
superh_cpu_tlb_fill() already provides a access_type variable of
type MMUAccessType, and it is passed along, but casted as integer
and renamed 'rw'.
Simply replace 'int rw' by 'MMUAccessType access_type'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210127232151.3523581-5-f4bug@amsat.org>
get_mmu_address() and get_physical_address() don't use their
'int access_type' argument: remove it along with ACCESS_INT
in superh_cpu_tlb_fill().
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Replace the 0/1/2 magic values by the corresponding MMUAccessType.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210127232151.3523581-3-f4bug@amsat.org>
We are going to move this code, fix its style first.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210127232151.3523581-2-f4bug@amsat.org>
If kvm_arch_remove_sw_breakpoint finds that a software breakpoint does not
have an INT3 instruction, it fails. This can happen if one sets a
software breakpoint in a kernel module and then reloads it. gdb then
thinks the breakpoint cannot be deleted and there is no way to add it
back.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will move this code in the next commit. Clean it up
first to avoid checkpatch.pl errors.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210221222617.2579610-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IDAU is specific to M-profile. KVM only supports A-profile.
Restrict this interface to TCG, as it is pointless (and
confusing) on a KVM-only build.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210221222617.2579610-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Section D6.7 of the ARM ARM states:
For the purpose of determining Tag Check Fault handling, unprivileged
load and store instructions are treated as if executed at EL0 when
executed at either:
- EL1, when the Effective value of PSTATE.UAO is 0.
- EL2, when both the Effective value of HCR_EL2.{E2H, TGE} is {1, 1}
and the Effective value of PSTATE.UAO is 0.
ARM has confirmed a defect in the pseudocode function
AArch64.TagCheckFault that makes it inconsistent with the above
wording. The remedy is to adjust references to PSTATE.EL in that
function to instead refer to AArch64.AccessUsesEL(acctype), so
that unprivileged instructions use SCTLR_EL1.TCF0 and TFSRE0_EL1.
The exception type for synchronous tag check faults remains unchanged.
This patch implements the described change by partially reverting
commits 50244cc76a and cc97b0019b.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219201820.2672077-1-pcc@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always perform one call instead of two for 16-byte operands.
Use byte loads/stores directly into the vector register file
instead of extractions and deposits to a 64-bit local variable.
In order to easily receive pointers into the vector register file,
convert the helper to the gvec out-of-line signature. Move the
helper into vec_helper.c, where it can make use of H1 and clear_tail.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210224230532.276878-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set ID_AA64PFR1_EL1.SSBS to 2 and ID_PFR2.SSBS to 1.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210216224543.16142-3-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for FEAT_SSBS. SSBS (Speculative Store Bypass Safe) is an
optional feature in ARMv8.0, and mandatory in ARMv8.5.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210216224543.16142-2-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the support needed for creating prstatus elf notes. This allows
us to use QMP dump-guest-memory.
Now ELF notes of RISC-V only contain prstatus elf notes.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Message-id: 20210201124458.1248-2-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
csr_ops[] is currently declared with an unknown size in cpu.h.
Since the array size is known, let's do a complete declaration.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1611024723-14293-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We already have the 'run' variable holding 'cs->kvm_run' value.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210303182219.1631042-3-philmd@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Measurement Block Origin inside the SCHIB is used when
Measurement Block format 1 is in used and must be aligned
on 64 bytes otherwise an operand exception is recognized
when issuing the Modify Sub CHannel (MSCH) instruction.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1613741973-3711-2-git-send-email-pmorel@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There is a compiler warning with GCC 9.3 when compiling with
the -fsanitize=thread compiler flag:
In function 'strncpy',
inlined from 's390x_write_elf64_notes' at ../target/s390x/arch_dump.c:219:9:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:106:10: error:
'__builtin_strncpy' specified bound 8 equals destination size
[-Werror=stringop-truncation]
Since the name should always be NUL-terminated, let's use g_strlcpy() to
silence this warning. And while we're at it, also add an assert() to make
sure that the provided names always fit the size field (which is fine for
the current callers, the function is called once with "CORE" and once with
"LINUX" as a name).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210205093921.848260-1-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Secure execution (aka protected virtualization) guests cannot be
migrated at the moment. If the unpack facility is provided in the cpu
model, a guest may choose to transition to secure mode, making the
guest unmigratable at that point in time. If the machine was explicitly
started with --only-migratable, we would get a failure only when the
guest actually tries to transition; instead, explicitly disallow the
unpack facility if --only-migratable was specified to avoid late
surprises.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20210125135332.181324-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmA3tzQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMsngf+OkbgTDouxq3qnn1K89n6j2wKlAj0
qPP+57o1sv5u5MjX0BkawXCMJfvTKJaOt/Cs8S0FaPTehfR5H0T2tL76KZBEdlEP
/+V3EC0Qmd1S47LKIOuDkV15szvnccyjpgwaL7Osjb0Eh0SxeXd4pBTc3yYtkacu
zb/srZ63U2iJZr93QwGmEJjuW57WNym6QWXF3Mrg9PFXybkXFTGumB2vZMlQc+MN
RWPTUKZKAiIr/HfdvpIETXY+HzJhylvIQ8OVWtM3XDorl48OWcOat/jyeNEVYgG3
o+gxIRnfvIL+42GkmUFbOKLzT5SV6p9EYYGLTuE1kU7nc6HWoD0CdPxA3A==
=UBVO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* fix --enable-fuzzing linker failures (Alexander)
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
# gpg: Signature made Thu 25 Feb 2021 14:41:56 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (29 commits)
tcg/i386: rdpmc: fix the the condtions
chardev: do not use short form boolean options in non-QemuOpts character device descriptions
vl: deprecate -writeconfig
target/i386: Add bus lock debug exception support
qom/object.c: Fix typo
target/i386: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -vnc
docs: update to show preferred boolean syntax for -chardev
qemu-options: update to show preferred boolean syntax for -vnc
qemu-options: update to show preferred boolean syntax for -incoming
qemu-options: update to show preferred boolean syntax for -netdev
qemu-options: update to show preferred boolean syntax for -spice
qemu-options: update to show preferred boolean syntax for -chardev
gdbstub: use preferred boolean option syntax
char: don't fail when client is not connected
scsi: drop 'result' argument from command_complete callback
scsi-disk: pass guest recoverable errors through even for rerror=stop
scsi-disk: pass SCSI status to scsi_handle_rw_error
scsi: introduce scsi_sense_from_errno()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bus lock debug exception is a feature that can notify the kernel by
generate an #DB trap after the instruction acquires a bus lock when
CPL>0. This allows the kernel to enforce user application throttling or
mitigations.
This feature is enumerated via CPUID.(EAX=7,ECX=0).ECX[bit 24].
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210202090224.13274-1-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"+foo" or "-foo"
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-11-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add and fix deallocation of temporary TCG registers in CRIS code
generation.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Change-Id: I17fce5d95bdc4418337ba885d53ba97afb1bafcc
Signed-off-by: Stefan Sandström <stefans@axis.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210219124416.28178-1-stefans@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
All callers of cris_mmu_translate() provide a MMUAccessType
type. Let the prototype use it as argument, as it is stricter
than an integer. We can remove the documentation as enum
names are self explicit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20210128003223.3561108-3-f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Replace the 0/1/2 magic values by the corresponding MMUAccessType.
We can remove a comment as enum names are self explicit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20210128003223.3561108-2-f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
- Drop redundant struct MemmapEntry (Bin)
- Fix for Coverity CID 1438965 and 1438967 (Jiaxun)
- Add MIPS bootloader API (Jiaxun)
- Use MIPS bootloader API on fuloong2e and boston machines (Jiaxun)
- Add PMON test for Loongson-3A1000 CPU (Jiaxun)
- Convert to translator API (Philippe)
- MMU cleanups (Philippe)
- Promote 128-bit multimedia registers as global ones (Philippe)
- Various cleanups/fixes on the VT82C686B southbridge (Zoltan)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmAyqe0ACgkQ4+MsLN6t
wN5Vbw/7BbLUjqZzs4pDVUv4XXeSoVIP9fEmEUoxbVgb58cD6ZE6PeEN7fT+I++E
fTu6Fw2WTHrGOWGkHRSOAGIAz4DqSsLJ2Qub4SRThdWgl9NgAgPDV32L7hCSJNfJ
ejK9PL/B4dYS1RoRPULdrsiuKYsXcl/QBo99nQoa+0fquPQBnA3LlPJX7my9s2SB
QoTK29V4KjLnTf4ebFP9mOHm4Z96lzl7jITjRUg4g5fh/IH+qlWlDUtMV5n2EL2b
Jp798z1ydsEGHmM1O5xbjQixwZZYSgt+mjRn4fHH/mSLyfanJW/0pK1o6Ktl2zDC
Ks1N0RNMsCZrvPXkUz6h7i6rXJsxzh0e96CmzOqBbKMzKuozig8ZMhmQTEGEvzf5
cMxAKYJu95ndmRISV8p3fdsT/t0j08WZ5m3Syz/VqV57mVP3fj2yqiDXl1vwoPjM
O2zYgK1VOgVsr0GPcJ5bHxDvuzbPvCd7YE0RhK2eFKkYLjQz7SEtC8RzmkKXoYze
8nj7eBgG37vaPUGOyjZROOftrTXvqx6swB9kmQ38FrIfM/tZQYa54w4kFXF7nI06
HIdiPIXPv+xqfwYUcsMuE/Mq/cXMTlgUF6445FHJ2yhaySrsch7BDR6BOgOmiNkM
iXT0PdlS5P1J4y5HBzwQhrGslZGdXz+UsmF+zq4vgfbMul4VsoQ=
=g7Kx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-20210221' into staging
MIPS patches queue
- Drop redundant struct MemmapEntry (Bin)
- Fix for Coverity CID 1438965 and 1438967 (Jiaxun)
- Add MIPS bootloader API (Jiaxun)
- Use MIPS bootloader API on fuloong2e and boston machines (Jiaxun)
- Add PMON test for Loongson-3A1000 CPU (Jiaxun)
- Convert to translator API (Philippe)
- MMU cleanups (Philippe)
- Promote 128-bit multimedia registers as global ones (Philippe)
- Various cleanups/fixes on the VT82C686B southbridge (Zoltan)
# gpg: Signature made Sun 21 Feb 2021 18:43:57 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/mips-20210221: (43 commits)
vt82c686: Fix superio_cfg_{read,write}() functions
vt82c686: Log superio_cfg unimplemented accesses
vt82c686: Simplify by returning earlier
vt82c686: Reduce indentation by returning early
vt82c686: Remove index field of SuperIOConfig
vt82c686: Move creation of ISA devices to the ISA bridge
vt82c686: Simplify vt82c686b_realize()
vt82c686: Make vt82c686b-pm an abstract base class and add vt8231-pm based on it
vt82c686: Set user_creatable=false for VT82C686B_PM
vt82c686: Fix up power management io base and config
vt82c686: Correctly reset all registers to default values on reset
vt82c686: Correct vt82c686-pm I/O size
vt82c686: Make vt82c686-pm an I/O tracing region
vt82c686: Fix SMBus IO base and configuration registers
vt82c686: Reorganise code
vt82c686: Move superio memory region to SuperIOConfig struct
target/mips: Use GPR move functions in gen_HILO1_tx79()
target/mips: Introduce gen_load_gpr_hi() / gen_store_gpr_hi() helpers
target/mips: Rename 128-bit upper halve GPR registers
target/mips: Promote 128-bit multimedia registers as global ones
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have handy functions to access GPR. Use gen_store_gpr() for
Move From HI/LO Register and gen_load_gpr() for Move To opcodes.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-8-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-7-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
TCG displays the upper halve registers with the same name
as their lower halves. Rename the upper halves with the
'[hi]' suffix.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The cpu::mmr[] array contains the upper halves of 128-bit GPR
registers. While they are only used by the R5900 CPU, the
concept is generic and could be used by another MIPS implementation.
Rename 'cpu::mmr' as 'cpu::gpr_hi' and make them global.
When the code is similar to the GPR lower halves, move it
close by.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-5-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We will access the cpu_HI/LO registers outside of translate.c.
Make them publicly accessible.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-4-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit 83be6b5412 ("Fix MSA instructions LD.<B|H|W|D> on big endian
host") introduced use of typedef/prototypes declared in "tcg/tcg.h"
without including it. This was not a problem because "tcg/tcg.h" is
pulled in by "exec/cpu_ldst.h". To be able to remove this header
there, we first need to include it here in op_helper.c, else we get:
[222/337] Compiling C object libqemu-mips-softmmu.fa.p/target_mips_msa_helper.c.o
target/mips/msa_helper.c: In function ‘helper_msa_ld_b’:
target/mips/msa_helper.c:8214:9: error: unknown type name ‘TCGMemOpIdx’
8214 | TCGMemOpIdx oi = make_memop_idx(MO_TE | DF | MO_UNALN, \
| ^~~~~~~~~~~
target/mips/msa_helper.c:8224:5: note: in expansion of macro ‘MEMOP_IDX’
8224 | MEMOP_IDX(DF_BYTE)
| ^~~~~~~~~
target/mips/msa_helper.c:8214:26: error: implicit declaration of function ‘make_memop_idx’ [-Werror=implicit-function-declaration]
8214 | TCGMemOpIdx oi = make_memop_idx(MO_TE | DF | MO_UNALN, \
| ^~~~~~~~~~~~~~
target/mips/msa_helper.c:8227:18: error: implicit declaration of function ‘helper_ret_ldub_mmu’ [-Werror=implicit-function-declaration]
8227 | pwd->b[0] = helper_ret_ldub_mmu(env, addr + (0 << DF_BYTE), oi, GETPC());
| ^~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210207232310.2505283-4-f4bug@amsat.org>
As the 'rw' argument is unused, remove it.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210220202026.2305667-1-f4bug@amsat.org>
get_seg_physical_address() calls CPUMIPSTLBContext::map_address()
handlers passing a MMUAccessType type. Update the prototype
handlers to take a MMUAccessType argument, as it is stricter than
an integer.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-14-f4bug@amsat.org>
get_physical_address() calls get_seg_physical_address() and
get_segctl_physical_address() passing a MMUAccessType type.
Let the prototypes use it as argument, as it is stricter than
an integer.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-13-f4bug@amsat.org>
All these functions:
- mips_cpu_get_phys_page_debug()
- cpu_mips_translate_address()
- mips_cpu_tlb_fill()
- page_table_walk_refill()
- walk_directory()
call get_physical_address() passing a MMUAccessType type. Let the
prototype use it as argument, as it is stricter than an integer.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-12-f4bug@amsat.org>
Both mips_cpu_tlb_fill() and cpu_mips_translate_address() pass
MMUAccessType to raise_mmu_exception(). Let the prototype use it
as argument, as it is stricter than an integer.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-11-f4bug@amsat.org>
The single caller, do_translate_address(), passes MMUAccessType
to cpu_mips_translate_address(). Let the prototype use it as
argument, as it is stricter than an integer.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-10-f4bug@amsat.org>
The single caller, HELPER_LD_ATOMIC(), passes MMUAccessType to
do_translate_address(). Let the prototype use it as argument,
as it is stricter than an integer.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-9-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-7-f4bug@amsat.org>
Remove these confusing and unused definitions.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-6-f4bug@amsat.org>
get_physical_address() doesn't use the 'access_type' argument,
remove it to simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-5-f4bug@amsat.org>
get_segctl_physical_address() doesn't use the 'access_type' argument,
remove it to simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-4-f4bug@amsat.org>
get_seg_physical_address() doesn't use the 'access_type' argument,
remove it to simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-3-f4bug@amsat.org>
TLB map_address() handlers don't use the 'access_type' argument,
remove it to simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-2-f4bug@amsat.org>
Similarly to commits ae82adc8e29..7f93879e444, use the
translator_ld*() API introduced in commit 409c1a0bf0
to fetch the code on the MIPS target.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210125105818.2707067-1-f4bug@amsat.org>
Change generated automatically using the Coccinelle
patch included in commit bf85388169 ("qdev: use
device_class_set_parent_realize/unrealize/reset()")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210201080348.438095-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Adds the support for AMD 3rd generation processors. The model
display for the new processor will be EPYC-Milan.
Adds the following new feature bits on top of the feature bits from
the first and second generation EPYC models.
pcid : Process context identifiers support
ibrs : Indirect Branch Restricted Speculation
ssbd : Speculative Store Bypass Disable
erms : Enhanced REP MOVSB/STOSB support
fsrm : Fast Short REP MOVSB support
invpcid : Invalidate processor context ID
pku : Protection keys support
svme-addr-chk : SVM instructions address check for #GP handling
Depends on the following kernel commits:
14c2bf81fcd2 ("KVM: SVM: Fix #GP handling for doubly-nested virtualization")
3b9c723ed7cf ("KVM: SVM: Add support for SVM instruction address check change")
4aa2691dcbd3 ("8ce1c461188799d863398dd2865d KVM: x86: Factor out x86 instruction emulation with decoding")
4407a797e941 ("KVM: SVM: Enable INVPCID feature on AMD")
9715092f8d7e ("KVM: X86: Move handling of INVPCID types to x86")
3f3393b3ce38 ("KVM: X86: Rename and move the function vmx_handle_memory_failure to x86.c")
830bd71f2c06 ("KVM: SVM: Remove set_cr_intercept, clr_cr_intercept and is_cr_intercept")
4c44e8d6c193 ("KVM: SVM: Add new intercept word in vmcb_control_area")
c62e2e94b9d4 ("KVM: SVM: Modify 64 bit intercept field to two 32 bit vectors")
9780d51dc2af ("KVM: SVM: Modify intercept_exceptions to generic intercepts")
30abaa88382c ("KVM: SVM: Change intercept_dr to generic intercepts")
03bfeeb988a9 ("KVM: SVM: Change intercept_cr to generic intercepts")
c45ad7229d13 ("KVM: SVM: Introduce vmcb_(set_intercept/clr_intercept/_is_intercept)")
a90c1ed9f11d ("(pcid) KVM: nSVM: Remove unused field")
fa44b82eb831 ("KVM: x86: Move MPK feature detection to common code")
38f3e775e9c2 ("x86/Kconfig: Update config and kernel doc for MPK feature on AMD")
37486135d3a7 ("KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <161290460478.11352.8933244555799318236.stgit@bmoger-ubuntu>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add file to default-configs
Add hexagon to meson.build
Add hexagon to target/meson.build
Add target/hexagon/meson.build
Change scripts/qemu-binfmt-conf.sh
We can build a hexagon-linux-user target and run programs on
the Hexagon scalar core. With hexagon-linux-clang installed,
"make check-tcg" will pass.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-35-git-send-email-tsimpson@quicinc.com>
[rth: Use top-level python variable]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Read the instruction memory
Create a packet data structure
Generate TCG code for the start of the packet
Invoke the generate function for each instruction
Generate TCG code for the end of the packet
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1612763186-18161-30-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The imported code uses host floating point. We override them
to use qemu softfloat
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-29-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Helpers won't work if there are multiple definitions, so we override these
instructions using #define fGEN_TCG_<tag>.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1612763186-18161-28-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Include the generated files and set up the data structures
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1612763186-18161-27-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Determine legal VLIW slots for each instruction
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-26-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
macros to interface with the generator
macros referenced in instruction semantics
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-25-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1612763186-18161-24-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Python script that emits the decode tree in dectree_generated.h.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-23-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Run the C preprocessor across the instruction definition and encoding
files to expand macros and prepare the iset.py file. The resulting
fill contains python data structures used to build the decode tree.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-22-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Python scripts generate the following files
helper_protos_generated.h.inc
For each instruction we create DEF_HELPER function prototype
helper_funcs_generated.c.inc
For each instruction we create the helper function definition
tcg_funcs_generated.c.inc
For each instruction we create TCG code to generate call to helper
tcg_func_table_generated.c.inc
Table of function pointers indexed by opcode
shortcode_generated.h.inc
Generate a table of instruction "shortcode" semantics
opcodes_def_generated.h.inc
Gives a list of all the opcodes
op_attribs_generated.h.inc
Lists all the attributes associated with each instruction
op_regs_generated.h.inc
Lists the register and immediate operands for each instruction
printinsn_generated.h.inc
Data for printing (disassembling) each instruction (format
string + operands)
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-21-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Run the C preprocessor across the instruction definition files and macro
definition file to expand macros and prepare the semantics_generated.pyinc
file. The resulting file contains one entry with the semantics for each
instruction and one line with the instruction attributes associated with
each macro.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-20-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Imported from the Hexagon architecture library
imported/macros.def
The macro definitions specify instruction attributes that are applied
to each instruction that references the macro. The generator will
recursively apply attributes to each instruction that used the macro.
imported/allidefs.def
Top level instruction definition file
imported/*.idef
Instruction definition files
These files are input to the first phase of the generator
(gen_semantics.c) to create a python include file with the
instruction semantics and attributes. The python include
file is fed to the second phase to generate various header files.
imported/encode*.def
Instruction encoding bit patterns for every instruction
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-19-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1612763186-18161-18-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
