manual decoding in gen_arith() is not necessary with decodetree. For now
the function is called trans_arith as the original gen_arith still
exists. The former will be renamed to gen_arith as soon as the old
gen_arith can be removed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
gen_arith_imm() does a lot of decoding manually, which was hard to read
in case of the shift instructions and is not necessary anymore with
decodetree.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
With decodetree we don't need to convert RISC-V opcodes into to MemOps
as the old gen_store() did.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
With decodetree we don't need to convert RISC-V opcodes into to MemOps
as the old gen_load() did.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
We now utilizes argument-sets of decodetree such that no manual
decoding is necessary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
trans_jalr() is the only caller, so move the code into trans_jalr().
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
we cannot remove the call to gen_arith() in decode_RV32_64G() since it
is used to translate multiply instructions.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
this splits the 64-bit only instructions into its own decode file such
that we generate the decoder for these instructions only for the RISC-V
64 bit target.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
for now only LUI & AUIPC are decoded and translated. If decodetree fails, we
fall back to the old decoder.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
Access to a counter in U-mode is permitted only if the corresponding
bit is set in both mcounteren and scounteren. The current code
ignores mcounteren and checks scounteren only for U-mode access.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch adds support for writing misa. misa is validated based
on rules in the ISA specification. 'E' is mutually exclusive with
all other extensions. 'D' depends on 'F' so 'D' bit is dropped
if 'F' is not present. A conservative approach to consistency is
taken by flushing the translation cache on misa writes. misa_mask
is added to the CPU struct to store the original set of extensions.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add misa checks for M, A, F and D extensions and if they are
not present generate illegal instructions. This improves
emulation accurary for harts with a limited set of extensions.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
gen methods should access state from DisasContext. Add misa
field to the DisasContext struct and remove CPURISCVState
argument from all gen methods.
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The gen methods should access state from DisasContext. Add priv_ver
field to the DisasContext struct.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
* Add riscv prefix to raise_exception function
* Add riscv prefix to CSR read/write functions
* Add riscv prefix to signal handler function
* Add riscv prefix to get fflags function
* Remove redundant declaration of riscv_cpu_init
and rename cpu_riscv_init to riscv_cpu_init
* rename riscv_set_mode to riscv_cpu_set_mode
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This adds the necessary minimum to support S-mode
virtualization for priv ISA >= v1.10
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Co-authored-by: Matthew Suozzo <msuozzo@google.com>
Co-authored-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Modifed from Richard Henderson's patch [1] to integrate
with the new control and status register implementation.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2018-03/msg07034.html
Note: the f* CSRs already mark mstatus.FS dirty using
env->mstatus |= mstatus.FS so the bug in the first
spin of this patch has been fixed in a prior commit.
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Co-authored-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
CSR predicate functions are added to the CSR table.
mstatus.FS and counter enable checks are moved
to predicate functions and two new predicates are
added to check misa.S for s* CSRs and a new PMP
CPU feature for pmp* CSRs.
Processors that don't implement S-mode will trap
on access to s* CSRs and processors that don't
implement PMP will trap on accesses to pmp* CSRs.
PMP checks are disabled in riscv_cpu_handle_mmu_fault
when the PMP CPU feature is not present.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use the new CSR read/modify/write interface to implement
atomic updates to mip/sip.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Previous CSR code uses csr_read_helper and csr_write_helper
to update CSR registers however this interface prevents
atomic read/modify/write CSR operations; in addition
there is no trap-free method to access to CSRs due
to the monolithic CSR functions call longjmp.
The current iCSR interface is not safe to be called by
target/riscv/gdbstub.c as privilege checks or missing CSRs
may call longjmp to generate exceptions. It needs to
indicate existence so traps can be generated in the
CSR instruction helpers.
This commit moves CSR access from the monolithic switch
statements in target/riscv/op_helper.c into modular
read/write functions in target/riscv/csr.c using a new
function pointer table for dispatch (which can later
be used to allow CPUs to hook up model specific CSRs).
A read/modify/write interface is added to support atomic
CSR operations and a non-trapping interface is added
to allow exception-free access to CSRs by the debugger.
The CSR functions and CSR dispatch table are ordered
to match The RISC-V Instruction Set Manual, Volume II:
Privileged Architecture Version 1.10, 2.2 CSR Listing.
An API is added to allow derived cpu instances to modify
or implement new CSR operations.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This pull request contains the first set of RISC-V patches I'd like to
target for the 3.2 development cycle. It's really just a collection of
bug fixes with one major new feature: PCIe can now be attached to RISC-V
guests.
This has passed my usual test of booting the latest Linux RC into a
Fedora disk image on the virt machine.
-----BEGIN PGP SIGNATURE-----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=BAOm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-3.2-part1' into staging
RISC-V Changes for 3.2, Part 1
This pull request contains the first set of RISC-V patches I'd like to
target for the 3.2 development cycle. It's really just a collection of
bug fixes with one major new feature: PCIe can now be attached to RISC-V
guests.
This has passed my usual test of booting the latest Linux RC into a
Fedora disk image on the virt machine.
# gpg: Signature made Fri 21 Dec 2018 16:01:29 GMT
# gpg: using RSA key EF4CA1502CCBAB41
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>"
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-3.2-part1:
MAINTAINERS: Mark RISC-V as Supported
riscv/cpu: use device_class_set_parent_realize
target/riscv/pmp.c: Fix pmp_decode_napot()
sifive_uart: Implement interrupt pending register
RISC-V: Enable second UART on sifive_e and sifive_u
RISC-V: Fix PLIC pending bitfield reads
RISC-V: Fix CLINT timecmp low 32-bit writes
RISC-V: Add hartid and \n to interrupt logging
sifive_u: Set 'clock-frequency' DT property for SiFive UART
sifive_u: Add clock DT node for GEM ethernet
riscv: Enable VGA and PCIE_VGA
hw/riscv/virt: Connect the gpex PCIe
hw/riscv/virt: Adjust memory layout spacing
hw/riscv/virt: Increase the number of interrupts
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, start and end address of a PMP region are not decoded
correctly by pmp_decode_napot().
Let's say we have a 128KB PMP region with base address as 0x80000000.
Now, the PMPADDRx CSR value for this region will be 0x20003fff.
The current pmp_decode_napot() implementation will decode PMPADDRx
CSR as t1=14, base=0x100000000, and range=0x1ffff whereas it should
have decoded PMPADDRx CSR as t1=14, base=0x80000000, and range=0x1fff.
This patch fixes the base value decoding in pmp_decode_napot() when
PMPADDRx CSR is not -1 (i.e. 0xffffffffffffffff).
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add carriage return that was erroneously removed
when converting to qemu_log. Change hard coded
core number to the actual hartid.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
target/s390x/gen-features.c
tests/migration/s390x/a-b-bios.c
tests/test-rcu-simpleq.c
tests/test-rcu-tailq.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181204172535.2799-1-armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Our current fence implementation ignores fences for the user-only
configurations. This is incorrect but unlikely to manifest: it requires
multi-threaded user-only code that takes advantage of the weakness in
the host's memory model and can be inlined by TCG.
This patch simply treats fences the same way for all our emulators.
I've given it to testing as I don't want to construct a test that would
actually trigger the failure.
Our fence implementation has an additional deficiency where we map all
RISC-V fences to full fences. Now that we have a formal memory model
for RISC-V we can start to take advantage of the strength bits on our
fence instructions. This requires a bit more though, so I'm going to
split it out because the implementation is still correct without taking
advantage of these weaker fences.
Thanks to Richard Henderson for pointing out both of the issues.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
sfence.vm has been replaced in priv v1.10 spec by sfence.vma.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
pmp_read_cfg() returns 8-bit value, which is combined together to form a single pmpcfg CSR.
The default promotion rules will result in an integer here ("i*8" is integer, which
flows through) resulting in a 32-bit signed value on most hosts.
That's bogus on RV64I, with the high bits of the CSR being wrong.
Signed-off-by: Dayeol Lee <dayeol@berkeley.edu>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
* Add user-mode CSR defininitions.
* Reorder CSR definitions to match the specification.
* Change H mode interrupt comment to 'reserved'.
* Remove unused X_COP interrupt.
* Add user-mode interrupts.
* Remove erroneous until comments on machine mode interrupts.
* Move together paging mode and page table bit definitions.
* Move together interrupt and exception cause definitions.
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch makes op_helper.c contain only instruction
operation helpers used by translate.c and moves any
unrelated cpu helpers into cpu_helper.c. No logic is
changed by this patch.
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Change the API of riscv_set_local_interrupt to take a
write mask and value to allow setting and clearing of
multiple local interrupts atomically in a single call.
Rename the new function to riscv_cpu_update_mip.
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
cpu_init() was removed since 2.12, so drop the define that is now unused.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Performance impact of this and the previous commits, measured with
the very-easy-to-cross-compile rv8-bench:
https://github.com/rv8-io/rv8-bench
Host: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
- Key:
before: master
after1,2,3: the 3 commits in this series (i.e. 3 is this commit)
- User-mode:
bench before after1 after2 after3 final speedup
---------------------------------------------------------
aes 1.12s 1.12s 1.10s 1.00s 1.12
bigint 0.78s 0.78s 0.78s 0.78s 1
dhrystone 0.96s 0.97s 0.49s 0.49s 1.9591837
miniz 1.94s 1.94s 1.88s 1.86s 1.0430108
norx 0.51s 0.51s 0.49s 0.48s 1.0625
primes 0.85s 0.85s 0.84s 0.84s 1.0119048
qsort 4.87s 4.88s 1.86s 1.86s 2.6182796
sha512 0.76s 0.77s 0.64s 0.64s 1.1875
(after1 only applies to softmmu, so no surprises here)
- Full-system (fedora):
bench before after1 after2 after3 final speedup
---------------------------------------------------------
aes 2.68s 2.54s 2.60s 2.34s 1.1452991
bigint 1.61s 1.56s 1.55s 1.64s 0.98170732
dhrystone 1.78s 1.67s 1.25s 1.24s 1.4354839
miniz 3.53s 3.35s 3.28s 3.35s 1.0537313
norx 1.13s 1.09s 1.07s 1.06s 1.0660377
primes 15.37s 15.41s 15.20s 15.37s 1
qsort 7.20s 6.71s 3.85s 3.96s 1.8181818
sha512 1.07s 1.04s 0.90s 0.90s 1.1888889
SoftMMU slows things down, so the numbers are less sensitive.
Cross-page jumps improve things a little bit, though.
Note that I'm not showing here averages, just results from a
single run, so with primes there isn't much to worry about.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit is intended to improve readability.
There is no change to the logic.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- Inline PTE_TABLE check for better readability
- Change access checks from ternary operator to if
- Improve readibility of User page U mode and SUM test
- Disallow non U mode from fetching from User pages
- Add reserved PTE flag check: W or W|X
- Add misaligned PPN check
- Set READ protection for PTE X flag and mstatus.mxr
- Use memory_region_is_ram in pte update
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-11-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do the cast to uintptr_t within the helper, so that the compiler
can type check the pointer argument. We can also do some more
sanity checking of the index argument.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to address_space_translate()
and address_space_translate_cached(). Callers either have an
attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-4-peter.maydell@linaro.org
This is now handled properly by the generic softfloat code.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* hw/arm/iotkit.c: fix minor memory leak
* softfloat: fix wrong-exception-flags bug for multiply-add corner case
* arm: isolate and clean up DTB generation
* implement Arm v8.1-Atomics extension
* Fix some bugs and missing instructions in the v8.2-FP16 extension
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJa9IUCAAoJEDwlJe0UNgzeEGMQAKKjVRzZ7MBgvxQj0FJSWhSP
BZkATf3ktid255PRpIssBZiY9oM+uY6n+/IRozAGvfDBp9eQOkrZczZjfW5hpe0B
YsQadtk5cUOXqQzRTegSMPOoMmz8f5GaGOk4R6AEXJEX+Rug/zbOn9Q8Yx7JTd7o
yBvU1+fys3galSiB88cffA95B9fwGfLsM7rP6OC4yNdUBYwjHf3wtY53WsxtWqX9
oX4keEiROQkrOfbSy9wYPZzu/0iRo8v35+7wIZhvNSlf02k6yJ7a+w0C4EQIRhWm
5zciE+aMYr7nOGpj7AEJLrRekhwnD6Ppje6aUd15yrxfNRZkpk/FeECWnaOPDis7
QNijx5Zqg6+GyItQKi5U4vFVReMj09OB7xDyAq77xDeBj4l3lg2DNkRfRhqQZAcv
2r4EW+pfLNj76Ah1qtQ410fprw462Sopb6bHmeuFbf1QFbQvJ4CL1+7Jl3ExrDX4
2+iQb4sQghWDxhDLfRSLxQ7K+bX+mNfGdFW8h+jPShD/+JY42dTKkFZEl4ghNgMD
mpj8FrQuIkSMqnDmPfoTG5MVTMERacqPU7GGM7/fxudIkByO3zTiLxJ/E+Iy8HvX
29xKoOBjKT5FJrwJABsN6VpA3EuyAARgQIZ/dd6N5GZdgn2KAIHuaI+RHFOesKFd
dJGM6sdksnsAAz28aUEJ
=uXY+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180510' into staging
target-arm queue:
* hw/arm/iotkit.c: fix minor memory leak
* softfloat: fix wrong-exception-flags bug for multiply-add corner case
* arm: isolate and clean up DTB generation
* implement Arm v8.1-Atomics extension
* Fix some bugs and missing instructions in the v8.2-FP16 extension
# gpg: Signature made Thu 10 May 2018 18:44:34 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180510: (21 commits)
target/arm: Clear SVE high bits for FMOV
target/arm: Fix float16 to/from int16
target/arm: Implement vector shifted FCVT for fp16
target/arm: Implement vector shifted SCVF/UCVF for fp16
target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only
target/arm: Implement CAS and CASP
target/arm: Fill in disas_ldst_atomic
target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode
target/riscv: Use new atomic min/max expanders
tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add
tcg: Introduce atomic helpers for integer min/max
target/xtensa: Use new min/max expanders
target/arm: Use new min/max expanders
tcg: Introduce helpers for integer min/max
atomic.h: Work around gcc spurious "unused value" warning
make sure that we aren't overwriting mc->get_hotplug_handler by accident
arm/boot: split load_dtb() from arm_load_kernel()
platform-bus-device: use device plug callback instead of machine_done notifier
pc: simplify MachineClass::get_hotplug_handler handling
softfloat: Handle default NaN mode after pickNaNMulAdd, not before
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# target/riscv/translate.c
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Notes:
- Did not convert {num,max}_insns, since the corresponding code
will go away in the next patch.
- ctx->pc becomes ctx->base.pc_next, and ctx->next_pc becomes
ctx->pc_succ_insn.
While at it, convert the remaining tb->cflags readers to tb_cflags().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Michael Clark <mjc@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Michael Clark <mjc@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These fields are marked WARL (Write Any Values, Reads
Legal Values) in the RISC-V Privileged Architecture
Specification so instead of raising exceptions,
illegal writes are silently dropped.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Vectored traps for asynchrounous interrupts are optional.
The mtvec/stvec mode field is WARL and hence does not trap
if an illegal value is written. Illegal values are ignored.
Later we can add RISCV_FEATURE_VECTORED_TRAPS however
until then the correct behavior for WARL (Write Any, Read
Legal) fields is to drop writes to unsupported bits.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Previously the mycycle/minstret CSRs and rdcycle/rdinstret
psuedo instructions would return the time as a proxy for an
increasing instruction counter in the absence of having a
precise instruction count. If QEMU is invoked with -icount,
the mcycle/minstret CSRs and rdcycle/rdinstret psuedo
instructions will return the instruction count.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Privileged ISA v1.9.1 defines mscounteren and mucounteren:
* mscounteren contains a mask of counters available to S-mode
* mucounteren contains a mask of counters available to U-mode
Privileged ISA v1.10 defines mcounteren and scounteren:
* mcounteren contains a mask of counters available to S-mode
* scounteren contains a mask of counters available to U-mode
mcounteren and scounteren CSR registers were implemented
however they were not honoured for counter accesses when
the privilege ISA was >= v1.10. This fix solves the issue
by coalescing the counter enable registers. In addition
the code now generates illegal instruction exceptions
for accesses to the counter enabled registers depending
on the privileged ISA version.
- Coalesce mscounteren and mcounteren into one variable
- Coalesce mucounteren and scounteren into one variable
- Makes mcounteren and scounteren CSR accesses generate
illegal instructions when the privileged ISA <= v1.9.1
- Makes mscounteren and mucounteren CSR accesses generate
illegal instructions when the privileged ISA >= v1.10
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
The mstatus.MXR alias in sstatus should only be writable
by S-mode if the privileged ISA version >= v1.10. Also MXR
was masked in sstatus CSR read but not sstatus CSR writes.
Now we correctly mask sstatus.mxr in both read and write.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
mtval/stval must be set on all exceptions but zero is
a legal value if there is no exception specific info.
Placing the instruction bytes for illegal instruction
exceptions in mtval/stval is an optional feature and
is currently not supported by QEMU RISC-V.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
satp is WARL so it should not trap on illegal writes, rather
it can be hardwired to zero and silently ignore illegal writes.
It seems the RISC-V WARL behaviour is preferred to having to
trap overhead versus simply reading back the value and checking
if the write took (saves hundreds of cycles and more complex
trap handling code).
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Section 22.8 Subset Naming Convention of the RISC-V ISA Specification
defines the canonical order for extensions in the ISA string. It is
silent on the position of the E extension however E is a substitute
for I so it must come early in the extension list order. A comment
is added to state E and I are mutually exclusive, as the E extension
will be added to the RISC-V port in the future.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This change is a workaround for a bug where mstatus.FS
is not correctly reporting dirty after operations that
modify floating point registers. This a critical bug
or RISC-V in QEMU as it results in floating point
register file corruption when running SMP Linux due to
task migration and possibly uniprocessor Linux if
more than one process is using the FPU.
This workaround will return dirty if mstatus.FS is
switched from off to initial or clean. According to
the specification it is legal for an implementation
to return only off, or dirty.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
- Model borrowed from target/sh4/cpu.c
- Rewrote riscv_cpu_list to use object_class_get_list
- Dropped 'struct RISCVCPUInfo' and used TypeInfo array
- Replaced riscv_cpu_register_types with DEFINE_TYPES
- Marked base class as abstract
- Fixes -cpu list
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This version uses a constant size memory buffer sized for
the maximum possible ISA string length. It also uses g_new
instead of g_new0, uses more efficient logic to append
extensions and adds manual zero termination of the string.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMM: Use qemu_tolower() rather than tolower()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
it will be used for providing to cpu name resolving class for
parsing cpu model for system and user emulation code.
Along with change add target to null-machine tests, so
that when switch to CPU_RESOLVING_TYPE happens,
it would ensure that null-machine usecase still works.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu> (m68k)
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (tricore)
Message-Id: <1518000027-274608-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Added macro to riscv too]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This adds RISC-V into the build system enabling the following targets:
- riscv32-softmmu
- riscv64-softmmu
- riscv32-linux-user
- riscv64-linux-user
This adds defaults configs for RISC-V, enables the build for the RISC-V
CPU core, hardware, and Linux User Emulation. The 'qemu-binfmt-conf.sh'
script is updated to add the RISC-V ELF magic.
Expected checkpatch errors for consistency reasons:
ERROR: line over 90 characters
FILE: scripts/qemu-binfmt-conf.sh
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Implementation of linux user emulation for RISC-V.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Implements the physical memory protection extension as specified in
Privileged ISA Version 1.10.
PMP (Physical Memory Protection) is as-of-yet unused and needs testing.
The SiFive verification team have PMP test cases that will be run.
Nothing currently depends on PMP support. It would be preferable to keep
the code in-tree for folk that are interested in RISC-V PMP support.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daire McNamara <daire.mcnamara@emdalo.com>
Signed-off-by: Ivan Griffin <ivan.griffin@emdalo.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
TCG code generation for the RV32IMAFDC and RV64IMAFDC. The QEMU
RISC-V code generator has complete coverage for the Base ISA v2.2,
Privileged ISA v1.9.1 and Privileged ISA v1.10:
- RISC-V Instruction Set Manual Volume I: User-Level ISA Version 2.2
- RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.9.1
- RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.10
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
GDB Register read and write routines.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Helper routines for FPU instructions and NaN definitions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Privileged control and status register helpers and page fault handling.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Add CPU state header, CPU definitions and initialization routines
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
