sdl_e_type in network byte order, causing such a socket not to receive
anything.
When working around that by not using htons() on bind, sending would then fail
on such a socket because the byte order is actually required to be swapped
there.
* Extend the comment for the B_NET_FRAME_TYPE macro to document that the input
types are supposed to be in host byte order to avoid future confusion.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42357 a95241bf-73f2-0310-859d-f6bbb57e9c96
rules. Otherwise the IMAP add-on is always built without SSL support.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42326 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Workaround for touchpad reset timeouts on some HP/Compaq KBCs. Looks like such
KBC marks the mouse reset request (xFF) as correctly sent (by xFA answer) but
does not wait enough time for the answer from touchpad. So complete answer
finally contains xFE xAA x00 bytes. The workaround detects this xFE xAA answer
and issues the RESEND (xFE) request to touchpad. This forces touchpad to resend
the last packet of data (xAA x00) that can be processed normally by the host;
* Fix for handling passthrough_command() call. The parent device was disabled at
start of processing command and was not re-enabled back in case any error return.
This fixes the touchpad "pass-through" feature handling on the same HP/Compaq HW.
This KBC has the "pass-through" capability marked ON but cannot handle it as
currently implemented - there is no answer from corresponding port. The parent
device stay in disabled state after this;
* Fix ps2_dev_publish() for handling passthrough devices (parent_dev != NULL)
This workaround postpone the publishing such device until the parent device
finishes it's opening and set the PS2_ENABLED_FALG. It prevent from mixing
the Synaptics multi-command sequences from synaptics_open() and ps2_dev_publish()
routines and failing both initializations;
Fixes#2867#3594#4315
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42325 a95241bf-73f2-0310-859d-f6bbb57e9c96
PS/2 active multiplexing activation sequence. This prevent from
IRQ storm on some controllers. Fixes#7635.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42323 a95241bf-73f2-0310-859d-f6bbb57e9c96
- When resizing a window the window size constraint stays soft when solving the layout. This makes sure that the layout constraints can be fulfilled. Fixes r41759.
- Some other refactoring.
S&T should work much better now. Sorry that I wasn't able to finish it before a3.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42280 a95241bf-73f2-0310-859d-f6bbb57e9c96
Localize the mail add-ons.
The Japanese translation is attached to #7689. Please give a notice when it is in the translation system and the ticket can be closed.
Does the B_UTF8_ELLIPSIS comes into the B_TRANSLATE macro?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42265 a95241bf-73f2-0310-859d-f6bbb57e9c96
default_mail{_in|_out}_directory() methods in the BPrivate namespace.
* Used these methods in the inbound/outbound protocols.
* Moved WriteMessageFile() into the BPrivate namespace as well, and put its
prototype into a new header MailPrivate.h along with the new directory
getters.
* Removed the automatic copy to the sent directory again, and only have one
directory for incoming mail. Incidentally, this fixed#7509, although the
underlying filter restriction remains.
* Automatic whitespace cleanups, some style cleanups. Sorry for the mess.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42260 a95241bf-73f2-0310-859d-f6bbb57e9c96
* GCC 4.5 complains about switchs with cases not part of the window_look enum (see WindowPrivate.h).
* To keep them private, cast the enum to int before use in switchs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42250 a95241bf-73f2-0310-859d-f6bbb57e9c96
Would explain why hat shown by StickIt was always static neutral...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42208 a95241bf-73f2-0310-859d-f6bbb57e9c96
directly reduces the time the mouse cursor is visible but cannot be moved
yet. Based on a patch by Adek336 as part of ticket #917.
* Decreased the republishing snooze about a second, too.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42198 a95241bf-73f2-0310-859d-f6bbb57e9c96
Plan to move gRegister into the crt struct at some point.
* Few style fixes
* Added function to probe edid of attached monitors and populate CRT info
* Disable VGA control modifications temporarly while I hammer out some issues.
* Fix radeon card model checks (bitwise & is not |)
* Finally fix? blanking start / end calculations using porch
* Use mask for setting sync polarity
* Add overscan (8 pixels is default?)
* Disable PLLSet/Power for the moment as it seems to muck things up.
* is_mode_supported now validates if a mode line is with the monitors
h/v sync frequencies (how does is_mode_supported know what crt the os wants?)
* PLL Write/Read don't actually use the PLL Write/Read functions (thanks AMD!)
* Added better PLL legacy (r600-r610) support
* Consistantly give no DCCG on legacy cards.
* Tracing!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42191 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Only try to cancel the a transfer, if sUseUSBKeyboard is set.
* Set the "_usbPipe" parameter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42181 a95241bf-73f2-0310-859d-f6bbb57e9c96
allows the use of stty to configure the serial device and later using other
commands with these settings still in place.
* Store incoming termios settings when they are set, restore the previous
settings on open and apply the control modes to the device side as well.
* Only send the control to the system side tty cookie again. Doing it for both
cookies was only done to configure the termios, which isn't necessary anymore.
* Remove fallbacks to c_{i|o}speed fields and always use c_cflag & CBAUD for the
single speed setting we have.
* Remove some leftover control line state logic that doesn't apply anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42161 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Make index numbering consistant (0-n vs 1-n)
* Add a little more tracing to PLLCalibrate because
we were missing a failure situation
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42158 a95241bf-73f2-0310-859d-f6bbb57e9c96
ensure that we don't block on the tty buffer, we chop up the data into blocks
that are written into the tty and then the buffer is flushed to the device
each time. This resolves the issue that a quick open/write/close would not
actually send the data to the device as it would cancel the transfer before
the output thread had a chance to run.
* Use the tty_close_cookie() call. Doing the close before waiting for the input
thread ensures that it is woken up if it blocked on writing into the tty.
* Correct the type of the USB callback status and only try to clear a halt if
the device was actually stalled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42156 a95241bf-73f2-0310-859d-f6bbb57e9c96
available as a module function as well.
* Remove some unneeded resetting from tty_destroy_cookie.
* Move the public module functions to the public API section of the file and
order them by their declaration order in the module info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42154 a95241bf-73f2-0310-859d-f6bbb57e9c96
to op which would've caused a wrong line state to be set.
* Add some more allocation checks.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42151 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add crtid to register struct
* Disable VGA mode on FrameBuffer set (enables extended mode setting)
* Disable blanking calculations and setting more gracefully via if 0
* Add a *large* amount of code to Set/Calculate/Calibrate PLL
* Disable PLL on removal of accel.
* Remove junk comments on overscan
* Enable pixel clock limit pulling
* write32AtMask style cleanup
* Rename ReadMC to be more consistant
(I need to adjust naming for these MMIO calls)
* Implement read/write MC. (so many hardcoded oneoffs AMD)
* Implement write32PLLAtMask MMIO call
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42146 a95241bf-73f2-0310-859d-f6bbb57e9c96
into it again (adding generic CBI support). It is so much of a copy even that it
still claimed to have the original 3 support descriptors while in fact it only
has one. Since the memory beyond that one support descriptor was probably just
zeros, making them complete wildcards usb_support_descriptor wise, this lead to
every single USB device being handed to the usb_floppy device added hook.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42145 a95241bf-73f2-0310-859d-f6bbb57e9c96
partition_module_info::uninitialize().
* Implemented the hook for BFS.
* Implemented KFileSystem::Uninitialize().
Fixes failure to initialize a BFS initialized device with an intel partition
map.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42142 a95241bf-73f2-0310-859d-f6bbb57e9c96
destroy the partitioning system's on-disk structure.
* Adjusted the existing partitioning system implementations accordingly.
Actually implemented the hook for the intel partitioning system.
* Added Uninitialize() method to KDiskSystem and KPartitioningSystem. The latter
implements the method calling the new module hook.
* _user_uninitialize_partition(): Also let the disk system uninitialize the
on-disk structure.
This fixes the failure to initialize a disk device with BFS, when it contains a
valid partition map with at least one partition.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42140 a95241bf-73f2-0310-859d-f6bbb57e9c96
which don't wait for a character, but return -1 when no character is
available ATM. Implemented correctly for x86 only.
* Changed the semantics of the debugger_module_info::debugger_getchar() hook.
It is supposed to return immediately now.
* Adjusted usb_keyboard accordingly. Hacked UHCI's debug_process_transfer() to
achieve that. It does now start, check, or cancel a transfer. Split
UHCI::ProcessDebugTransfer() into StartDebugTransfer(), and
CheckDebugTransfer() accordingly, and also added a CancelDebugTransfer().
The latter seems to have issues. Michael, please have a look. I have no clue
what I'm doing. :-)
* Adjusted kgetc() to poll all possible inputs using the new
functions/semantics. This allows to use any input (USB, PS/2, serial) in KDL.
* Removed the no longer needed "serial_input" command.
* read_line(): Also support 0x7f as backspace code. That's what xterm sends.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42126 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Would be nice to only show this when an extra argument had been passed to
checkfs, but I'm afraid the API is somewhat limited, not to say pretty much
unusable for the task.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42125 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reorganized the kernel locking related to threads and teams.
* We now discriminate correctly between process and thread signals. Signal
handlers have been moved to teams. Fixes#5679.
* Implemented real-time signal support, including signal queuing, SA_SIGINFO
support, sigqueue(), sigwaitinfo(), sigtimedwait(), waitid(), and the addition
of the real-time signal range. Closes#1935 and #2695.
* Gave SIGBUS a separate signal number. Fixes#6704.
* Implemented <time.h> clock and timer support, and fixed/completed alarm() and
[set]itimer(). Closes#5682.
* Implemented support for thread cancellation. Closes#5686.
* Moved send_signal() from <signal.h> to <OS.h>. Fixes#7554.
* Lots over smaller more or less related changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42116 a95241bf-73f2-0310-859d-f6bbb57e9c96
problems on various systems. Resolves#3441. Thanks!
+alpha3
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42104 a95241bf-73f2-0310-859d-f6bbb57e9c96
AcquireReference() now does, and adjust all callers that relied on the previous
return type.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42091 a95241bf-73f2-0310-859d-f6bbb57e9c96
only halfway finished. The way it is supposed to work is that there are two
tty cookies, representing the system and the device side. Reads and writes
coming from the system and going to the device are using the system cookie
while reads and writes coming from the device use the device cookie.
* Move writing to the device into an output thread, similar to how reading from
the device works. This isn't necessarily a good idea and might be moved back
into the write hook again to ensure that writes can be made blocking. Right
now if you just write and then close, the writes will most likely be canceled
before every going out to the device.
* Removed the read and write lock mutex. They aren't necessary as the tty layer
will serialize the reads and writes anyway.
* Made simply copying the data to the write buffer the default implementation of
the OnWrite callback and removed the OnWrite in ACMDevice. The ProlificDevice
didn't provide an OnWrite hook before, so it would've never written anything.
* Break out the baud index to speed mapping into an inline function. Since the
defines might change in termios.h just adding an array is a bit fragile (it
already missed one entry and would've been broken for certain speeds).
This should make usb_serial usable for some (most?) cases. I've tested this with
an Arduino board that uses an FTDI interface. As mentioned above, since writes
currently just write into the tty layer and don't wait for the data to be
flushed, and since close doesn't wait for the output buffers to be drained
either, a simple write and close (as in "echo a > /dev/ports/usb0") will in most
cases cancel the output before it is written to the device. I'm looking into
a few ways to fix that next.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42089 a95241bf-73f2-0310-859d-f6bbb57e9c96
header is used that only has 6 bits of length info this would've previously
potentially overflowed depending on the input size.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42088 a95241bf-73f2-0310-859d-f6bbb57e9c96
is inside the cflags) since stty for example sets them.
* Turn off debug output by default and fix a warning due to that.
* Some minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42087 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Begin using multi-architecture friendly formatting macros per ML
* Change uint32 snoozeTime to preferred bigtime_t per ML
* Thanks for the great feedback!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42062 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add additional tracing to usb_disk lun inquiry
* cd and other optical disk devices can take some time to spin up
when plugged. Now we give them some time to do so to ensure we
can detect the media type properly if there is a cd in the drive.
Things non-mechanical (flash drives) will continue almost immediately
as there is no spin up time. The more attempts, the longer the wait.
We now try 7 times (28 seconds total), my modern usb cdrom takes
about 6 (21 seconds) of those cycles to be ready on power up and 4
(10 seconds) on media change while powered up.
* tested with usb media and cd media. Doesn't introduce any visible
delay to the user.
* the write protected status in lun is now correct for my usb cd device
on plug (it wasn't previously)
* still seeing it though as read/write. Looking at this now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42058 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made MessageIO comply to our coding style.
* No other functional change (intended).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42055 a95241bf-73f2-0310-859d-f6bbb57e9c96
always calling the device and requesting it. If no HID descriptor is found in
the configuration we fall back to retrieving it manually and if that fails we
fall back to a dummy report descriptor length. In the most usual case this will
save one unnecessary USB control request.
Incidentally this also fixes the absolute pointing device under VirtualBox. VBox
stalled the retrieval of the HID descriptor. That alone wasn't so problematic as
in this case we just fell back to the dummy report descriptor length which
would've been large enough. But VBox also times out the next request after the
stall, which in this case was the retrieval of the report descriptor, hence no
HIDDevice could be created.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42019 a95241bf-73f2-0310-859d-f6bbb57e9c96
* As they don't claim to be HID, they don't provide a report descriptor either,
so we build one. The built descriptor is similar to the one found in FreeBSD
for the same class of devices. Might fix/help #7649, for lack of hardware I
can't test this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42003 a95241bf-73f2-0310-859d-f6bbb57e9c96
usb_hid_device_added hook so that we can actually detect non-HID devices at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42002 a95241bf-73f2-0310-859d-f6bbb57e9c96
allow for creating descriptors that don't use report IDs at all.
* Adjust sixaxis_build_descriptor and set the global report ID once at the
beginning instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42001 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add these to the usb_support_descriptor when adding from the quirky devices.
* Extend the SIXAXIS comment a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42000 a95241bf-73f2-0310-859d-f6bbb57e9c96
descriptor. This allows us to support devices that aren't strictly HID or only
provide vendor specific interfaces by constructing report descriptors for their
data format.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41992 a95241bf-73f2-0310-859d-f6bbb57e9c96
absolute coordinates (qemu/kvm -usbdevice tablet) and various digitizers. If a
tablet-like usage is determined the MouseProtocolHandler publishes to
input/tablet instead of input/mouse and reports its info in a tablet_movement
structure instead of a mouse_movement structure, allowing for absolute
coordinates. Note that right now only the absolute coordinates are used, the
other tablet specific inputs (eraser, pressure, tilt and contact) aren't yet
filled in. I will add these as a second step.
I've only tested this with kvm where this makes the "seamless" mouse integration
work and therefore fixes#5989. Note that QEMU for BeOS/Haiku doesn't support
that mode (patch pending on my side) and will lock the pointer into the upper
left corner if -usbdevice tablet is used (whereas it previously just did
nothing).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41951 a95241bf-73f2-0310-859d-f6bbb57e9c96
to build a new descriptor using a HIDWriter. This way a completely new
descriptor can be built on the fly or a fixed already patched blob can be
written to the writer if desired.
* Implemented writing a new report descriptor for Sony SIXAXIS controllers. The
descriptor also includes the pressure sensitive button states (exposed as 12
axes) and the accelerometers/gyroscope (exposed as another 4 axes). While the
motion sensing data is now available (and fun to look at), the usefulness is
fairly limited, as the values are not scaled/transformed in any way. It might
be possible to generically do such transformations using unit descriptions,
but those are not implemented yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41925 a95241bf-73f2-0310-859d-f6bbb57e9c96
duplicate usages and simply adds more axes in that case. It also removes the
gaps that were previously put in place if there were higher numbered axes.
However, since the ordering of the axes now depends on the ordering inside the
HID collection, it is possible that some controllers won't have the X, Y and Z
axis mapped as the first three axes, which might confuse applications. I've not
encountered a report structure that would lead to such a situation yet, but then
again the amount of reports I was able to get hold of is fairly limited. If it
becomes a problem the mapping needs to be adjusted accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41923 a95241bf-73f2-0310-859d-f6bbb57e9c96
report descriptors. These descriptors aren't optimized for efficiency (the
writer doesn't attempt to avoid writing unneeded global items for example) but
they will only serve as input for the HIDParser that parses them correctly
regardless.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41921 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Only cancel the update thread if the last open instance is closed. This fixes
that other applications using the same joystick would stop getting updated
values as soon as one application was closed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41905 a95241bf-73f2-0310-859d-f6bbb57e9c96
function that is triggered before the protocol handlers are added.
* Use the quirky device mechanism to support the Sony SIXAXIS controller (the
PS3 one). It requires a specific get_report to become operational. Note that
you still have to push the PS button to enable it after plugging in. Note also
that only the two analog sticks are reported as axis, the analog values of the
buttons as well as the motion sensors aren't described by the HID descriptor
and therefore aren't accessible. The digital button states (on/off only) work
however. A fixed descriptor could possibly be crafted to support the missing
features later on though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41902 a95241bf-73f2-0310-859d-f6bbb57e9c96
handlers. A full sized keyboard is assumed when LEDs are found and those are
preferred then. This makes USB keyboards work (at least those that worked
by voluntarily entering KDL before, i.e. those that are hooked up to UHCI root
ports) also when entering KDL by means of a panic. The first (few) keys are
swallowed though, but that's certainly better than it not working at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41898 a95241bf-73f2-0310-859d-f6bbb57e9c96
both, variable and extended joystick mode, using the same mechanism of mimicing
the extended_joystick structure with the variable one if required. The mode
used depends on the support flag coming in from BJoystick (currently off), so
with this commit the behaviour doesn't change. I'm going to flip that switch
next though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41891 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fixed some coding style and a few sanity checks where it make sense.
This driver code is not in a good shape and needs a wide cleanup.
unfortunatly, I still don't have any device to test with, so I can't do that anytime soon.
Intead of letting his patch collecting dust since 3 months (my bad),
I think it's better the multi-port support gets at least more exposure than
just Pete's hardware.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41874 a95241bf-73f2-0310-859d-f6bbb57e9c96
with the BJoystick requirements:
* Make the Read() non-blocking. This is required as BJoystick is a polling
interface. A single current state is used that is updated by a separate thread
on report arrival. The thread is spawned as soon as the ProtocolHandler is
opened for the first time (and quit at the first wait return after the
ProtocolHandler is closed). With this we can simply return the current state
on read.
* Remove the ring buffer as it was not needed in the first place. This also
happens to solve the problem of sharing a JoystickProtocolHandler. Before,
concurrent reads would queue up the same result multiple times in the ring
buffer and then return stale data on the next update.
Solves most of #7629.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41865 a95241bf-73f2-0310-859d-f6bbb57e9c96
ever wait for reports on demand, there's no need for buffering at all.
This removes some unnecessary copying and ring buffer overhead, the ring buffer
will now in fact not be created at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41864 a95241bf-73f2-0310-859d-f6bbb57e9c96
This includes input scaling, so the resulting input ranges should always match
the ones of the BJoystick data (hence no calibration should be required).
* It supports joysticks, gamepads and multi-axis controllers. I've only tested
it with a Microsoft SideWinder Gamepad Pro so far, which now works as expected
with stickit.
* Fixes#7429.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41851 a95241bf-73f2-0310-859d-f6bbb57e9c96
is loaded. SMTP and POP still have this problem! TODO: use the ServerConnection class in these add-ons too.
This would also remove a lot of #ifdef SSL form these add-ons. Will not do it in the near future, feel free to fix it
...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41840 a95241bf-73f2-0310-859d-f6bbb57e9c96
of returning B_ERROR to the ProtocolHandler base class. Not used yet, but will
be used for the BJoystick <-> JoystickProtocolHandler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41835 a95241bf-73f2-0310-859d-f6bbb57e9c96
Remove extra ssl lock, there is already one in ssl.
This fixes#7574. I have seen this or a similar bug before and it was quit reproduceable, now it seems to be fixed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41828 a95241bf-73f2-0310-859d-f6bbb57e9c96
it's taken from freebsd driver e1000 r221505
This include alot of cards (including my HP)
I had to "remove" som parts. led was the easiest part. All code shoulc have haiku in them
The part below was perhaps needed but I could not fix the error that whas showing (located in if_em.c) aslo it works as is on my HP 8540.
static int
em_sysctl_reg_handler(SYSCTL_HANDLER_ARGS)
{
struct adapter *adapter;
u_int val;
adapter = oidp->oid_arg1;
val = E1000_READ_REG(&adapter->hw, oidp->oid_arg2);
return (sysctl_handle_int(oidp, &val, 0, req));
}
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41815 a95241bf-73f2-0310-859d-f6bbb57e9c96
handle the different device classes. Handlers are now added based on the
application collections that the HID descriptor describes instead of by
enumerating the different report items inside the reports. This means that a
device is now logically treated as a mouse when it comes with an application
collection that designates it as a mouse, instead of when there is a report
that contains an X and a Y axis. This resolves the conflicts that gamepads
and joysticks were added as mice due to them containing such elements. This
therefore fixes#4499 and opens up the way to properly handle other device
types like joysticks (#7429), gamepads, tablets (#7354, #5989 and #7481) and
so on. I'll work on gamepads/joysticks next and see where we stand for tablets
later.
* Added a few enumeration functions to HIDCollection to support the above.
* Fix the root collection handling. A device doesn't describe a single root
collection and then adds everything as a child. Instead it just has multiple
collections on level 0. We account for that now by always creating an empty
logical collection as the root collection where all the collections of the
descriptor get added.
* Rename the {Mouse|Keyboard}Device.{cpp|h} to
{Mouse|Keyboard}ProtocolHandler.{cpp|h} as that more clearly describes their
purpose. These classes are protocol handlers, i.e. they handle the ioctl based
mouse and keyboard protocol between the driver and the input_server add-ons.
* Change a lot of stuff to use references instead of pointers where it makes
sense (not necessarily complete yet).
I've tested this successfully on a keyboard with extended keys, a combo device
with a keyboard with extended keys and a mouse, a mouse and a gamepad (that now
doesn't do anything anymore) and found no regressions. However, since there are
a lot of very varied ways how to describe such functions with HID, it's not too
unlikely that some more curiously described devices will now stop working. These
have to be handled case by case and their usages have to be added to the added
to the appropriate handlers (or new handlers have to be written). Please test
and create bug reports (preferrably including the report descriptor that is
written out to /tmp).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41794 a95241bf-73f2-0310-859d-f6bbb57e9c96
keep things simple to troubleshoot
* use crt offset only on evergreen, else use AMD provided
register locations
* init_registers(crtid) is called before making register calls
to a monitor.
* init_registers supports 1-2 displays on r600-r700
* init_registers supports 1-6 displays on r800+ (AMD eyefinity)
* restore CardBlankSet function in a more simple form
(still needs init_registers addition)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41757 a95241bf-73f2-0310-859d-f6bbb57e9c96
* pass mapped frame buffer area id to accelerant
* remove my temporary hacked together frame buffer memory mapping
* completely rely on PCI BAR for now for aperture size / location instead of
R6XX_CONFIG_FB_BASE reg.
* Remove my temporary AllocateFB function.
* set grphPrimarySurfaceAddr to physical memory frame buffer location (offset 0)
* fix P/N sync setting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41722 a95241bf-73f2-0310-859d-f6bbb57e9c96
it with our new setting. Otherwise we might end up with an illegal value as the
interrupt threshold which might inhibit interrupt generation alltogether
depending on the controller implementation. This was the case for the ATI/AMD
SBx00 chipsets. Therefore fixes#5551.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41690 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupt handler every millisecond so it can check for interrupts to handle.
While this is certainly not ideal, it allows EHCI to run (surprisingly well
even) on chipsets that experience interrupt routing issues.
It can be enabled with the safemode setting "ehci_polling on" that can either
be entered using the new advanced debug option entry in the bootloader and/or
in the kernel settings file.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41688 a95241bf-73f2-0310-859d-f6bbb57e9c96
Hopefully undoes the string changes seen on HTA since r41629.
Note that the asymmetric escaping/unescaping (PlainTextCatalog::WriteToFile()
vs. BHashMapCatalog::SetString()) is rather broken and needs to be fixed.
+alpha I guess.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41667 a95241bf-73f2-0310-859d-f6bbb57e9c96
* make sure the PortEnable bit is disabled (specification page 28)
* 250ms is too long: USB 2.0 specifies only 50ms. This prevented one of my devices to be detected.
+alpha
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41658 a95241bf-73f2-0310-859d-f6bbb57e9c96
This changes how Decorators are managed and applied. The app_server
no longer scans and maintains the available ones himself, but is
simply asked to load a Decorator add-on from a provided path.
The Decorator scanning is moved into DecorInfo and DecorInfoUtil,
private classes in the InterfaceKit. The bin command 'setdecor'
uses those.
I cleaned up all the coding style violations that I could find,
removed chunks of code which didn't make sense (if you never put
a NULL pointer into a list, you don't need to check for this and
so on) and also cleaned up other passages for improved clarity
and simplicity.
I also tested the functionality and it works fine. Would even be
Ok to include in Alpha 3, IMHO. Thanks for the patch!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41581 a95241bf-73f2-0310-859d-f6bbb57e9c96
* make shared memory info naming clearer.
* move frame buffer internal offset read to driver
* remove check of > 512MB as we really should always use frame_buffer_size
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41569 a95241bf-73f2-0310-859d-f6bbb57e9c96
PartitionMapWriter::WriteMBR(): Also read the old MBR from disk when the boot
code shall be overwritten. Prevents overwriting of the disk ID. Closes ticket
#7507.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41565 a95241bf-73f2-0310-859d-f6bbb57e9c96
* introduce a global struct to hold register locations for
Radeon HD chipset model this accelerant was spawned for.
* add Radeon 5430 PCIID
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41555 a95241bf-73f2-0310-859d-f6bbb57e9c96
* set up a dumb deframer.
* received isochronous buffers can be zero length: loop instead of breaking.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41541 a95241bf-73f2-0310-859d-f6bbb57e9c96
* remove device_type and replace with device_chipset
* change MEMSIZE to >> 10 as r600-r700 store this in bytes (r800 uses MB and will be fixed soon)
* add if statement to select what register locations to use based on chipset
** Maybe use a struct or something to store these in a standardized way?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41525 a95241bf-73f2-0310-859d-f6bbb57e9c96
the case, but maybe there's some BIOSes that disable them? More or less poking
around for #5551, doesn't do any harm in any case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41514 a95241bf-73f2-0310-859d-f6bbb57e9c96
but maybe it helps on some chipsets to avoid interrupt storms during handover.
* Remove comments that aren't true anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41513 a95241bf-73f2-0310-859d-f6bbb57e9c96
periodic list cache. This workaround is based on similar patches in NetBSD and
Linux and disables the (Advanced) Periodic List Cache on the affected devices
using ATI/AMD specifc registers (as documented in the corresponding AMD
register reference guide).
Also remove a ton of stray whitespace introduced by the isochronous patches.
Please take more care the next time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41512 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel settings file. As pointed out by Rene, there's otherwise no way to
enable ACPI when the settings file is absent, as there's only a disable switch
in the boot menu.
* Remove MADT dumping as it isn't really implemented. This info can actually be
printed in the IO-APIC code now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41497 a95241bf-73f2-0310-859d-f6bbb57e9c96
* changes next_log to their actual type instead of void*
* the field this_phy now includes the item type, it simplifies things.
* isochronous transfer descriptors are linked in the periodic frame list first,
and points to existing interrupt transfer descriptors.
This is still work in progress. Yet it's worth committing as it doesn't seem to
have impacts, and is required for the UVC SoC project. Tested basically with
usb_webcam to receive UVC stream headers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41424 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add boot item support to radeon hd driver
* add edid storage to shared info
* add pull of active monitor VESA EDID to radeon hd driver (until AtomBios complete)
* EDID pulled in driver now passed to create_display_modes
* move registers to external stock xorg radeon hd register headers (lic. allows it)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41411 a95241bf-73f2-0310-859d-f6bbb57e9c96
from settings retrieved through get_{current|possible}_resources().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41382 a95241bf-73f2-0310-859d-f6bbb57e9c96
* remove manual sDisplayMode and make use of mode_list_area via Axel's common accelerant code using vesa as example
* move mask enabled write32 function to accelerant with write32 calls
* move register offsets into mode.h headers
* rename DxMode* to CardMode*
* make adjustments and implement radeon hd mode setting further
* remove previously defined kStdModeTimings
* hardware mode setting still needs work
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41374 a95241bf-73f2-0310-859d-f6bbb57e9c96
turns out to be flaky, is a little bit of a hack anyway and performs unnecessary
operations. The functionality is now handled kernel side which optimizes those
problems away.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41372 a95241bf-73f2-0310-859d-f6bbb57e9c96
the base bus number and segment which is what we're using them for. It should
work generically, however I only tested it to look up PCI bridge devices.
The logic is a subset of what is done in AcpiEvPciConfigRegionSetup when setting
up the operation region for a PCI device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41365 a95241bf-73f2-0310-859d-f6bbb57e9c96
the cached pci_info and writes the new value into PCI config space. Drivers
using either mechanism to enumerate devices will therefore get the updated
value.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41364 a95241bf-73f2-0310-859d-f6bbb57e9c96
a pointer (also as written would prob crash); use new mode sanity check on the provided static mode
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41341 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI module now has a get_possible_resources function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41320 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Adds IPv6 fragmentation support and some partial work to enable configuration of IPv6 in net_server. Not currently in the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41291 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the session module to create an extra session for existing audio
tracks.
* Let cdda also recognize "audio partitions" as published by the session module.
* If there is only a single session, the session module now gives file system
drivers the chance to play with the device directly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41288 a95241bf-73f2-0310-859d-f6bbb57e9c96
* when removing a transfer, if this was the only one in the list, we set fLastIsochronousTransfer to NULL.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41286 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use uint64 instead of off_t for the frame numbers.
* Shuffled Volume methods around to match the declaration order.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41282 a95241bf-73f2-0310-859d-f6bbb57e9c96
updated several firmwares for iprowifi4965 and iprowifi3945. Tested on iprowifi4965 only.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41240 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added _ProbeCommitFormat() and _SelectBestAlternate()
* to be noticed: BUSBInterface::SetAlternate() isn't const and there is no mean to get a non-const BUSBInterface.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41196 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added SuggestVideoFrame() so that this can be overriden.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41195 a95241bf-73f2-0310-859d-f6bbb57e9c96
simple click or becomes a tap drag. ALPS does not send these events.
- Enable ALPS.
- Force const edge motion speed. Synaptics sends events with a certain frequency ALPS don't. Even worse ALPS stops sending events durring a edge motion when you don't move your finger. Current
speed is 200 pixel/s. In theory synaptics has different event frequency modes which would result in a different edge motion speed in the previous approach. Please check if synaptics works/speed is correct. Will try to get a synaptics laptop for testing...
- fix class variable names.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41190 a95241bf-73f2-0310-859d-f6bbb57e9c96
makes it abort earlier when no firmware files are available. Note that this
worked some time ago and seems to be an edge case triggering an issue in the
slab allocator. Freeing the buffer (possibly allocated with an invalid size)
in the error case triggered the assert in #6679. That should probably be looked
at, but meanwhile this should close#6679.
Note also that looking for firmware is deliberatly done only at open() time,
since the configured operational mode determines the firmware to be used and
having the firmware loaded later makes the mode easily changeable at runtime.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41144 a95241bf-73f2-0310-859d-f6bbb57e9c96
ALPS movements are fine now, hope the synaptics is still working. Please test! There are still some leftovers form switching from a c struct to a c++
class will fix that later.
- Support ALPS devices with passthrough.
- ALPS is still disabled because tap and edge motion is not working yet. The
problem is that synaptics generates more helper events which makes this a lot
easier to implement. My plan is to emulate this events to imitate the synatics touchpad.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41140 a95241bf-73f2-0310-859d-f6bbb57e9c96
more or less a copy of the synaptics driver. Next step is to refactor the movement generation and share the
code with the synaptics driver.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41124 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ntfs log handler wasn't included for Haiku, it should be used to set up a log handler.
* style fix
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41081 a95241bf-73f2-0310-859d-f6bbb57e9c96
marked as read by another client the haiku client at least updates the flags and mark it as read when fetching the body. Thats the way Opera is
doing it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41018 a95241bf-73f2-0310-859d-f6bbb57e9c96
product id. Currently the list only has an example entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41017 a95241bf-73f2-0310-859d-f6bbb57e9c96
The complete window need some love so do not complain at this stage, feel free to fix it, though :-) (Main problem is to add a cancel button to abort the folder fetch and show an error message, see #7258).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40978 a95241bf-73f2-0310-859d-f6bbb57e9c96
there is no need to do the usage page and usage id handling anymore.
* As this also removes the only use of the global state it is removed as well.
* Try the usage maximum as a fallback as well and print something if none of the
usage sources are valid and the collection ends up without a proper usage.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40954 a95241bf-73f2-0310-859d-f6bbb57e9c96
the conversion, it makes it easier to do it for all items the same. This fixes
the missing initialization of the usage stack as pointed out by caz_haiku in
#7354, thanks for the pointer!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40953 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Move the main data declaration to where it's used.
* Tiny cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40952 a95241bf-73f2-0310-859d-f6bbb57e9c96
There is one thread (BLooper) to handle new commands and one watcher thread which is just listening at the server port for updates. The race condition occurred for example when a sync/watching and a fetch body message are send to the looper. The sync message just triggered the IDLE command in the watcher thread. In the meantime the fetch body command send a DONE command, because the IDLE command has not be send at this time the watcher keeps watching.
- fix int32 -> ssize_t thanks Axel and Stippi
- clean up
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40919 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add a INTEL_TYPE_915M type to be used by 0x2592 (mobile version)
* 0x2e32 is actually non mobile, added its brothers 0x2e02, 0x2e12, 0x2e22, 0x2e42, 0x2e92
* 0x27a2 is actually mobile.
* added 0x2972, 0x2982, 0x2992 for INTEL_TYPE_965 type, and 0x2a12 for INTEL_TYPE_965M.
* added corresponding entries in intel_gart.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40838 a95241bf-73f2-0310-859d-f6bbb57e9c96
I remember there was a ticket about the localization problem in one of
this components. I'll look for it tomorrow and close them all. If I'll find them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40734 a95241bf-73f2-0310-859d-f6bbb57e9c96
the B_TRANSLATE_WITH_COMMENT macro are misinterpreted by our
localization routines. I fix this one, because it provocate
permanent fingerprint check failure during catkeys link procedure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40723 a95241bf-73f2-0310-859d-f6bbb57e9c96
virtual but only static methods, it is not so likely that binary compatibility issues may arrise
from using it in new apps. Adjusted all the Jamfiles that included the private libicon headers. Note
that it was never necessary to link against libicon.a, since it's part of libbe anyway. There was one
instance where that was done. Hopefully it does not break the build, but I did this change a while ago,
tested it and then the harddrive began failing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40679 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Set watching variable when leaving the watching method.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40635 a95241bf-73f2-0310-859d-f6bbb57e9c96
iconsintently.
Respect the 80 columns limit, update copyright, used calloc instead of
malloc.
No functional changes (hopefully)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40597 a95241bf-73f2-0310-859d-f6bbb57e9c96
