e59b8e538e
add CIS strings of FUJITSU FMV-181,182,182A
...
delete ITCFJ182A, because FMV-182[A] ID is same as ITCFJ182A.
2001-12-18 11:23:24 +00:00
57957526e0
Uoo
...
Make it compile.
2001-12-17 14:34:37 +00:00
1b0449d255
support BREAK function,
...
keep a value of the last LCR.
2001-12-17 14:31:02 +00:00
d5f3329501
In BREAK, the value of LCR is held.
2001-12-17 14:19:39 +00:00
7cd101a6ca
Introduce the new umass quirk table.
...
Discussed with augustss.
2001-12-17 12:16:14 +00:00
a9f41fe33b
dd support for the Promise Ultra100TX2, Promise Ultra100TX2v2 and Ultra133
...
IDE controllers. In part from OpenBSD via ragge, in part from FreeBSD.
2001-12-16 23:35:52 +00:00
3b488c3f27
Fix an off-by-one error when autoconfig is hunting for a free RAID
...
device in the rare event that the one it wants is already in use.
Thanks to Wolfgang Stukenbrock for noticing the bug and filing the PR.
This fix addresses PR#14862.
2001-12-16 22:57:32 +00:00
e53aabcecc
Rename weasel.c to weasel_isa.c in preparation for supporting the
...
PCI version of the Weasel.
2001-12-16 22:35:31 +00:00
cf64f893c8
Try again: weasel -> weasel_isa
2001-12-16 22:33:35 +00:00
87e8f0c761
Oops, revert previous; it included some other changes there weren't
...
meant to be checked in.
2001-12-16 22:32:07 +00:00
b45e326520
weasel -> weasel_isa
2001-12-16 22:30:26 +00:00
cb2d65aaf9
Fix a minor typo.
2001-12-16 22:23:01 +00:00
23dfa29697
Add the serial port on the Middle Digital, Inc. PCI Weasel.
2001-12-16 22:22:04 +00:00
fd8e4d1653
Regen:
...
Add Middle Digital, Inc. vendor ID. Add product IDs for the
Middle Digital PCI-Weasel Virtual VGA, Serial Port, and Control
registers.
2001-12-16 22:00:41 +00:00
f7b4a308a9
Add Middle Digital, Inc. vendor ID. Add product IDs for the
...
Middle Digital PCI-Weasel Virtual VGA, Serial Port, and Control
registers.
2001-12-16 21:59:47 +00:00
3faa83dcb4
To make dev/pcmcia work on platforms with 64-bit bus_addr_t and
...
32-bit bus_size_t (sparc), change the pcmcia_mem_map(9) offsetp
argument to bus_size_t as it is used as a bus_space offset.
2001-12-16 17:53:17 +00:00
0a1465a39c
handle vendor and product lookup with common routine
2001-12-16 15:11:19 +00:00
10c8cdf485
missing Misc Attribute of PCMCIA functions
...
FUJITSU CF Ether ITCFJ182A supported "Power down"
Power down supply current are 20mA
2001-12-16 06:07:50 +00:00
ff638ce5fd
support FUJITSU CF EthernetCard
...
ITCFJ181A
mbe0 at pcmcia1 function 0: Fujitsu J182A Compact Flash Ethernet
mbe0: Ethernet address 00:00:0e:c5:01:ea
2001-12-16 05:44:33 +00:00
a4ad95c757
regen
2001-12-16 05:43:16 +00:00
dc739ee7b9
add FUJITSU CF EthernetCard
...
ITCFJ181A
2001-12-16 05:42:46 +00:00
7d563fd40e
malloc() + memset() -> malloc() with M_ZERO flag
2001-12-16 04:17:02 +00:00
7f32875295
if_media support for the DP83905 AT/LANTIC (a souped-up DP8390).
2001-12-16 00:22:43 +00:00
c72d5d40dd
Add code to support the bugged Macronix MX98905 chip, as used in several
...
podulebus Ethernet cards. This replaces the NE2000 memory-access routines
with ones that don't try to transfer more than 255 bytes at a time.
This code should perhaps be merged into ne2000.c, but presumably most NE2000
clones won't need it.
2001-12-15 17:47:34 +00:00
875bff0962
To make dev/pcmcia work on platforms with 64-bit bus_addr_t and
...
32-bit bus_size_t (sparc), change the pcmcia_mem_map(9) offsetp
argument to bus_size_t as it is used as a bus_space offset.
2001-12-15 13:23:20 +00:00
3514260fd4
Regen.
2001-12-15 13:18:10 +00:00
c425f6ea72
Add Cologne Chip Designs ISDN controller.
2001-12-15 13:17:49 +00:00
e324e87ca8
Fix typo in comment.
2001-12-15 12:01:55 +00:00
3022b71f80
Correct copyright header.
2001-12-15 11:45:24 +00:00
df984ecc52
Use bus_size_t's for bus space read/write offsets.
2001-12-15 11:41:09 +00:00
6b9f60a2db
install into /usr/include/dev/ir, since Jason made irdaattach look here.
2001-12-15 01:03:28 +00:00
c6df7d4358
Regen.
2001-12-15 00:31:43 +00:00
385b05e2f9
Add another Altima PHY. From Peter Seebach.
2001-12-15 00:31:03 +00:00
c70fc55cba
Add a hack for ScanLogic SL11R IDE adapter. From FreeBSD.
2001-12-15 00:26:14 +00:00
3a31906841
Regen.
2001-12-15 00:25:00 +00:00
4a4ae0b6b7
YAD.
2001-12-15 00:15:01 +00:00
18c6adb0b6
YAD (Yet Another Device)
2001-12-15 00:07:45 +00:00
f79701e3fa
Regen.
2001-12-14 23:57:00 +00:00
154a59571d
Add SS1001.
2001-12-14 23:56:42 +00:00
356c54687b
Integrate fix from PR 10155.
...
Add ACCTON SS1001.
2001-12-14 23:56:21 +00:00
8d1585affa
The Olympus C-1 engine cameras seem to need the PQIRK_ONLYBIG quirk.
2001-12-14 22:15:52 +00:00
74a0c5db97
Remember to add header byte to length.
...
Use fewer magic constants.
(The driver works now.)
2001-12-14 15:44:04 +00:00
342a82f2dd
Start read at open.
...
Don't send new header when nothing changes.
(But uirda is still not working.)
2001-12-14 13:07:33 +00:00
7f50d17c46
Sanity check speed setting.
2001-12-14 12:57:30 +00:00
142cdc8997
Rearrage softc a little.
2001-12-14 12:56:58 +00:00
aa89e69702
Don't reallocate I/O buffers.
2001-12-14 12:08:14 +00:00
d787f49ee6
Fix descriptor definition bug.
...
Clear endpoint stall on error.
2001-12-14 12:02:53 +00:00
2ee0431a3d
Register definitions for the NatSemi DP83905 AT/LANTIC, as used in many
...
podulebus Ethernet cards.
2001-12-14 10:16:03 +00:00
f144837e0e
Stylistic changes
2001-12-14 08:58:49 +00:00
2d27ad7c73
Define a new structure to store wire specific control methods.
...
The basic BBB/CBI functions are stored as members of constant structure.
When attached device, softc holds one of that constant structures.
2001-12-14 08:46:19 +00:00
69424fd268
typo fix
2001-12-14 08:33:54 +00:00
49bba69842
Use device handle and interface number which are stored in softc.
2001-12-14 06:21:56 +00:00
53f34def69
Change style to store endpoint addresses and pipes.
2001-12-14 05:58:13 +00:00
219d22404b
Major restructuring for swizzling to the request queue and unswizzling from
...
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it).
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
For NetBSD, it does a ddi_dmamap_sync as appropriate. This gets us out of
the explicit ddi_dmamap_sync on the whole response queue that we did for SBus
cards at each interrupt.
Set things up so that platforms that cannot have an SBus don't get a lot of
the SBus code checks (dead coded out).
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
Explicitly decode GetAllNext SNS Response back *as* a GetAllNext response.
Otherwise, we won't unswizzle it correctly.
Nuke some additional __P macros.
2001-12-14 00:13:44 +00:00
acbfdd822a
Roll f/w to latest level, correcting several, ah, interesting bugs.
2001-12-14 00:07:55 +00:00
71e063c830
pdc202xx_setup_channel: remove a duplicate line.
2001-12-13 20:57:22 +00:00
ca9f8b13da
Regen: Add some promise controllers, from FreeBSD
2001-12-13 20:41:05 +00:00
b981b05472
Add some promise controllers, from FreeBSD
2001-12-13 20:40:28 +00:00
04c10fc0cf
Initialize lock.
2001-12-13 17:25:37 +00:00
3df38cc501
Some debug stuff.
2001-12-13 17:15:09 +00:00
f2821a312a
Fix TODO comment.
2001-12-13 17:14:21 +00:00
090d1a628e
Move parameter checks to a common place.
2001-12-13 15:09:07 +00:00
2485171a67
Use unsigned ints.
2001-12-13 15:08:26 +00:00
9dbc5fd199
ANSIfication & KNF fixes.
2001-12-13 08:38:35 +00:00
f075aa60ac
ANSIfication & cosmetic changes.
2001-12-13 08:35:38 +00:00
9ff2a7a76d
ANSIfy.
2001-12-13 08:34:55 +00:00
d5decae4e0
ANSIfication & cosmetic changes.
2001-12-13 08:31:39 +00:00
cba701fed7
remove bogus printf.
2001-12-13 02:50:30 +00:00
0ba8bac8fe
Fix some bugs. But the driver is still borken.
2001-12-13 02:16:21 +00:00
d6bbabfb1b
Some DIAGNOSTIC nonsense.
2001-12-13 00:33:58 +00:00
a97820e536
Don't use u_int since it requires sys/types.h
2001-12-13 00:33:36 +00:00
8e98b4a185
Add some special cases for the Sitecom adapter.
...
Make endian safe.
Fix some minor bugs.
2001-12-12 23:59:48 +00:00
3ed67fc0c4
Add missing delay for the tekram dongle.
2001-12-12 17:52:06 +00:00
5c0685d35e
Don't use timeout 0 to tsleep() when the time is short.
2001-12-12 17:21:36 +00:00
0a4d7b9de3
Add a scanner quirk for keeping the pipes open between device opening.
...
Idea from Enami.
2001-12-12 15:48:18 +00:00
7727919172
Use USBD_NO_COPY in for some transfers where it was missing.
2001-12-12 15:44:47 +00:00
2fdd0f5a4b
Some more paranoia checks when DIAGNOSTIC.
2001-12-12 15:38:58 +00:00
29c3fe261b
Add some comments.
2001-12-12 15:38:27 +00:00
95d1208c14
Regen.
2001-12-12 15:37:21 +00:00
290d3a0d9e
Add some devices.
2001-12-12 15:36:59 +00:00
dfbcffae07
Remove some stupid casts.
2001-12-12 15:36:08 +00:00
2fe5c52a53
Use unsigned ints for device settings.
2001-12-12 15:34:49 +00:00
fae70125c0
Change default value for ebofs.
2001-12-12 15:34:15 +00:00
0680aa8809
Add some ioctl()s for consumer IR.
2001-12-12 15:33:53 +00:00
bb9f9be772
Add uirda.
2001-12-12 15:31:33 +00:00
4a802f4928
Add USB-IrDA bridge.
...
Needs more testing.
2001-12-12 15:27:24 +00:00
22735e5d44
Move usbd_clear_endpoint_toggle() prototype to usbdi.h.
2001-12-12 15:23:58 +00:00
968318a989
Use vendor/product variables
2001-12-12 14:24:53 +00:00
0f983137af
Don't change wire protocol state in umass generic function
2001-12-12 13:23:20 +00:00
54e3c1962e
bcopy -> memcpy
2001-12-12 13:17:03 +00:00
51b292ea65
Added support for the PowerStorm 4d20, initial support that is.
...
I plan on cleaning a few things up over the next few days, but this
appears to be working for me.
2001-12-12 07:50:05 +00:00
94448f7e52
Update the ramdac interface to be allow the setting of dotclocks. This is
...
required to support the driver in ibm561.c.
2001-12-12 07:47:46 +00:00
8ffabd82eb
Initial support for the IBM RGB561 RAMDAC. This uses the same interface
...
as the Bt463 and Bt485 drivers.
2001-12-12 07:46:48 +00:00
8e6f7afb5b
MKfoo=no -> NOfoo
2001-12-12 01:48:43 +00:00
1ad59a57f2
Recognized Danube chip as well.
...
Small cleanup.
2001-12-11 21:34:06 +00:00
f696afd8ff
Name changes: {KBD,MS}_BPS => {KBD,MS}_DEFAULT_BPS
2001-12-11 17:27:25 +00:00
f1e83bd500
Regen.
2001-12-11 11:21:56 +00:00
a2b8531ff3
Add some Intel/ICP-Vortex/Compaq products.
2001-12-11 11:21:01 +00:00
b327c956d1
Regen: add product ID for the Motorola MPC107.
2001-12-11 11:00:45 +00:00
4e24ace442
Add product ID for the Motorola MPC107.
2001-12-11 10:57:50 +00:00
0fc3ae7e76
Add (some) register definitions for the Motorola MPC105 PCI Bridge/Memory
...
Controller (PCIB/MC).
2001-12-10 12:09:33 +00:00
aa816a6d89
Regen.
2001-12-10 03:36:54 +00:00
9cfe511c73
Add some devices.
2001-12-10 03:36:12 +00:00
9d39bbf3a8
Support for dvd region code (RPC).
2001-12-09 22:56:10 +00:00
3cdc6f6197
Changed clocktl interface to use syscallargs structures
2001-12-09 16:10:43 +00:00
14deefd5b1
pckbd_enable is called during autoconfig. Using pckbc_enqueue_cmd at
...
that time will have bad results, such as queue corruption because
of multiple TAILQ_INSERTs, etc, because it's not designed to work
in an interrupt/context-free environment. Use pckbc_poll_cmd instead.
2001-12-09 13:42:01 +00:00
80c46be6c1
KBD_BPS => KBD_DEFAULT_BPS (sync with ms driver nomenclature).
2001-12-09 12:03:32 +00:00
5962ca0a49
Allow SUN_MS_BPS to override the mouse baud rate at all times. (see PR14774).
2001-12-09 12:02:06 +00:00
c9b557f40e
Add an item
2001-12-09 03:06:46 +00:00
d6671330e0
The prom doesn't setup the fb if its not set to console.
...
We shouldn't try to configure it in that case.
This will make serial console work. completes fix to PR#14213
(Private email determined PR author was using serial console.)
2001-12-08 19:42:45 +00:00
a5812755ac
Pass sbus addresses to sbus_bus_map(), not sbus_bus_addr()'d ones.
2001-12-08 05:36:31 +00:00
ee7afa77b2
Fix sense of if to grab address from alternation if srom is not in isv
...
format on Davicom chips. Add sparc specific case in this case to call
myetheraddr if oui is all 0s (for Netra X1).
2001-12-07 21:13:58 +00:00
178a439b58
Regen.
2001-12-07 14:21:18 +00:00
272f471ee0
add detach support for st.
2001-12-07 11:26:30 +00:00
e7357c0007
Regen: Add HPB and LPC functions of 82801BAM.
2001-12-07 08:00:35 +00:00
c971f89005
Add HPB and LPC functions of 82801BAM.
2001-12-07 07:59:24 +00:00
b445461d1e
Rebuild these to fix the "generated from" line.
2001-12-07 07:43:10 +00:00
9dd4ce03d0
Add Palm m500/m505 and Sony Clie USB cradle device IDs.
2001-12-07 06:59:44 +00:00
27b0006d34
it doesn't make sense to wait for resources during autoconfiguration
2001-12-06 21:04:27 +00:00
ba528e6dec
Small change to Christos' fix: allow malloc() to return NULL, but complain
...
if it does.
2001-12-06 20:00:58 +00:00
94074f1212
change the malloc arg from NOWAIT to WAITOK; pointed out by lennard.
2001-12-06 19:54:02 +00:00
dbabce6bb7
PR/14852: Martin Husemann: Allocate the slotdata the the probed slot before
...
we call the configuration function. Thanks lennard for pointing it out.
XXX: Someone should look this over and make sure that the current strategy
makes sense.
2001-12-06 19:52:56 +00:00
bc1f5761e3
Recognize the MK48T18 as well (differs from the MK48T08 only in packaging
...
options and voltages).
2001-12-06 18:54:23 +00:00
22fd9bbb5f
Add IrDA related defines.
2001-12-06 17:00:26 +00:00
a76d350acc
Fix component class/types to match reality for SGI's ARCS, which is just
...
different enough from stock ARC to be annoying.
2001-12-06 14:59:02 +00:00
23e1fa1306
Fix PR 13465 by Krister Walfridsson: memory initialization used uninitialized
...
variable to start off the write pattern (how ironic! 8-).
2001-12-06 13:18:22 +00:00
72f2d1c3a3
#endif ... -> #endif /* ... */
2001-12-06 10:28:40 +00:00
604ea366d4
Restructure to get rid of size limit.
...
Fix return value bug.
2001-12-06 00:17:12 +00:00
5ef96ebab2
Don't crash on early calls to get the speeds.
2001-12-06 00:11:18 +00:00
ec901ec7fe
Regen.
2001-12-05 23:25:56 +00:00
12812553f8
Add a NEC USB 2.0 hub. (USB 2.0 hubs are very rare creatures at the moment!)
2001-12-05 23:25:31 +00:00
3fe7074804
Compile with NWD == 0. Fixe kern/14844 by hamajima@nagoya.ydc.co.jp.
2001-12-05 20:43:00 +00:00
b24bbb4d82
Constify a little.
2001-12-05 20:00:15 +00:00
47fffba901
Add dongle specific code.
2001-12-05 19:59:54 +00:00
1a3eaeafd8
Now generate oosiop.out, the compiled 53c700 script.
2001-12-05 18:34:19 +00:00
ba3be8d408
Generated from oosiop.ss rev. 1.1:
...
Initial compiled script for 53c700.
2001-12-05 18:32:55 +00:00
60c77bb2f1
Added support for the Symbios/NCR 53c700 SCSI controller.
...
This chip is very similar to the 53c710, except that it's
missing a few registers, doesn't do relative jumps and
doesn't have the table-indirect addressing mode.
I have checked that this still generates the same output
on the existing scripts for the other chips.
2001-12-05 18:31:53 +00:00
8dce160cd1
New script for the Symbios/NCR 53c700 SCSI controller.
...
This is closely related to osiop.ss, the script for the
53c710.
2001-12-05 18:27:13 +00:00
bd8b498c42
Do SIR framing on incoming frames.
2001-12-05 15:51:11 +00:00
8c2cf4c7d8
Break out SIR framing to its own file.
2001-12-05 14:50:13 +00:00
31fcd50433
Use defparam instead of defflags for some bktr(4) related options that need
...
a value. Add BKTR_REVERSE_MUTE to defflags.
2001-12-05 11:41:16 +00:00
20a3ef2b53
Remove some debug printf()s.
2001-12-05 10:54:51 +00:00
9c8fe0b8c5
Put bytes on right q.
2001-12-05 04:31:02 +00:00
0913a897a5
Set error code for IRDA_RESET_PARAMS.
2001-12-05 04:30:24 +00:00
af5eb6fc8c
Fix some minor bug.
...
Add more debugging.
2001-12-05 04:07:06 +00:00
b81ddff1a7
Reset parameters on open.
2001-12-05 04:06:32 +00:00
a9f73b2015
s/defopt/defparam/ in previous; from lukem.
2001-12-05 03:50:09 +00:00
8a32c6fbfa
Change PCI_NETBSD_ENABLE_IDE back to a defopt - it's a mask.
2001-12-05 03:24:57 +00:00
037eb62a0f
Mention that much of the code was stolen from Tommy Bohlin.
2001-12-05 01:13:58 +00:00
3ead5262dd
Add some dongle support ioctl()s.
2001-12-04 23:33:33 +00:00
527fff66c0
Change speed setting a little.
2001-12-04 21:50:50 +00:00
e0b032d651
Add ir/ to SUBDIR.
2001-12-04 21:43:44 +00:00
64a9c02472
Implement speed setting.
2001-12-04 20:53:21 +00:00
a275d0a6b9
clarify copyright - this is all freshly written, no older code used
2001-12-04 20:51:23 +00:00
7a12ca98ab
Make this NCR 53C90 driver work, using the chip information from
...
Tymm Twillman's Linux mca_53c9x driver.
Tested with external ZIP100 only.
2001-12-04 20:47:58 +00:00
ceb358f80c
Fix so these files build with options DEBUG enabled.
...
The change to edc_mca.c may not work as I don't have any mca hardware.
2001-12-04 20:00:15 +00:00
636b7788a1
Implement input processing (untested).
2001-12-04 19:56:43 +00:00
1db6a7d9df
Simplify interface to irframe.
2001-12-04 19:56:17 +00:00
4950567ffc
Regen.
2001-12-04 18:46:51 +00:00
9925bfcf9f
PR/13711: Peter Seebach: Symbol's Spectrum24 pcmcia/prism2 card isn't probed.
2001-12-04 18:46:30 +00:00
5aee55caae
New file, describing what little I know of the layout of the Oak SCSI card.
2001-12-04 18:40:14 +00:00
b4371d47f5
Replace some misuses of "then" with "than".
2001-12-04 17:56:30 +00:00
6dbb6e893b
Simply entries added in previous.
2001-12-04 04:30:22 +00:00
5f99a98472
Add irframetty driver for IrDA frames over serial lines.
...
THIS MOST DEFINITELY DOES NOT WORK. IT'S VERY INCOMPLETE.
2001-12-03 23:32:32 +00:00
08733c9d51
add NCR_VARIANT_NCR53C90_86C01 "NCR53C90 (86C01)"
...
treat exactly like NCR_VARIANT_ESP100
2001-12-03 23:27:31 +00:00
5eb74d8bbe
Use correct format letter for chp->channel.
2001-12-03 11:07:34 +00:00
02aa2a59bc
Handle vendor/product lookup with a common routine.
2001-12-03 01:47:12 +00:00
bfc80822c7
Update my copyrigth.
2001-12-03 00:20:22 +00:00
4ca5497111
Allow wd to attach to something else than wdc/pciide (like USB<->ATA bridges):
...
- move some functions from ata.c to ata_wdc.c or wdc.c.
- add callbacks to struct ata_bustype so that wd.c doesn't call directly
functions from the lower level driver.
2001-12-03 00:11:15 +00:00
23d4159897
Add a subroutine to search for a vendor/product pair.
2001-12-02 23:25:25 +00:00
65768c08e2
No need to include atavar.h here.
2001-12-02 22:59:40 +00:00
4809ad42cb
Clean up attach of wd/atapibus:
...
kill ata_atapi_attach. Change atapibus to use a struct scsipi_channel instead
of ata_atapi_attach as attach arch. Create a ata_device, compatible with
scsipi_channel, to attach wd.
2001-12-02 22:44:32 +00:00
194762be5b
Touch up a little. No functional change.
2001-12-02 20:29:55 +00:00
1187860bcf
GC unused stuff.
2001-12-02 20:06:00 +00:00
f803294ead
use the new MCABUS_DMA_16BIT flag to use 16bit DMA (not implicit anymore)
2001-12-02 17:04:41 +00:00
2a22b00459
Add some IrDA names.
2001-12-02 16:32:04 +00:00
766e28edd3
Add driver for the Toshiba's Oboe IrDA chip. From Jan Sparud.
2001-12-02 16:30:30 +00:00
cf8a8cbe20
Fixes from Jan Sparud's code:
...
Make read and write methods symmetrical, add poll method.
2001-12-02 16:29:25 +00:00
1208c816b3
Add (#ifdef'ed out) code to support the PDMA hardware on the Oak SCSI card.
...
Unfortunately, this code seems not to work at present. I don't yet know why.
2001-12-02 14:49:32 +00:00
4e3bf132c0
Add comments naming our private-use characters (in lower case, to make them
...
distinct from real Unicode characters).
2001-12-02 12:46:32 +00:00
b540959734
Add framework for Ir devices. The irframe device is for delivering IrDA
...
frame to user land and the cir device is for consumer Ir (remote controls).
This code is only partially finished, but the irframe device works (given
a low level driver for the actual IrDA device).
2001-12-02 10:44:43 +00:00
adb908503d
Add identifiers for HP devices.
2001-12-02 01:17:51 +00:00
43fe22fed0
Revert previous; the _e003U definition is used elsewhere.
2001-12-02 01:04:26 +00:00
15d94a4c59
On a VT100, the "scanline 5" character is also used for box drawing, so
...
represent it as U+2500 (BOX DRAWINGS LIGHT HORIZONTAL). This makes NetHack
DECgraphics mode work properly on a wscons console using an IBM-encoded font.
2001-12-01 16:07:58 +00:00
c65c74ab28
regenerate (allocate identifier for NCR 53c90)
2001-12-01 10:44:35 +00:00
8272a293b7
allocate identifier for NCR 53C90
2001-12-01 10:43:36 +00:00
4b334401ca
Nonworking NCR 53c90 attachment. I don't get any interrupts from
...
the device yet, need to find real NCR53c90 docs to figure out what's wrong.
2001-12-01 10:42:38 +00:00
e69c410de5
Shorten wmesg so that they can be distinguished in ps/top output.
2001-12-01 09:42:39 +00:00
b56cddb826
Fix null pointer dereference when EHCI_DEBUG is defined (and
...
debug is enabled).
2001-12-01 09:39:32 +00:00
c6c2c476eb
Hum, no need to print a message each time we're waiting for the drive.
2001-12-01 00:05:04 +00:00
e6922f82d6
Various quirks for the ATAPI OnStream DI-30, mostly from the FreeBSD driver.
...
Many thanks to Chris Pinnock for giving me remote access to his hardware.
2001-12-01 00:03:45 +00:00
cd8d64fe2b
For ATAPI tape drives, poll for DSC (using a callout), to get the real
...
status of the command, and make sure the drive is ready for the next one.
2001-12-01 00:00:29 +00:00
2781ac8e07
Regen.
2001-11-30 13:41:17 +00:00
a287e24799
Add new devices. From URA Hiroshi in PR 14790.
2001-11-30 13:41:00 +00:00
33bfd7be53
Fix typo in copyright notice.
2001-11-29 17:15:44 +00:00
e0492a661d
Update note about ioctl tsleep error with error report.
2001-11-29 15:01:19 +00:00
4b06fc39aa
Regen.
2001-11-29 13:58:41 +00:00
7a7025366e
Add some ISD devices.
2001-11-29 13:58:22 +00:00
c01e71bac5
Plug a memory leak in an error case.
2001-11-29 11:07:12 +00:00
636e9cd08b
Add a "cacheline_size" argument to pci_configure_bus(). It is used
...
to set the cacheline size in the BHLC register. This should be the
size of the largest D-cache line on a system.
2001-11-28 23:48:34 +00:00
c563f940be
ELINK_W4_UBYTESOK is 0x0d. This is probably why kim is getting x2 numbers
...
in stats.
2001-11-28 23:46:42 +00:00
8528a3409b
Match also product id 0x627c, it was omitted by mistake.
...
Problem pointed out by Carl Drougge on tech-kern, thanks!
2001-11-28 20:56:47 +00:00
ecb81c3f6d
- convert usage of "defopt" to "defflag" where the relevant option does
...
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups
2001-11-28 10:21:10 +00:00
71376e0797
use #ifdef MEMORY_DISK_DYNAMIC (for consistency with the rest of the kernel)
2001-11-28 05:55:34 +00:00
9f42ccc795
use #ifdef DDB (for consistency with the rest of the kernel)
2001-11-28 05:45:27 +00:00
371fd3fc10
use #ifdef RAID_AUTOCONFIG (for consistency with the rest of the kernel)
2001-11-28 05:39:13 +00:00
4fd267f75d
Added the new defopt SCSI_OLD_NOINQUIRY; this is used instead
...
of sun2 to wrap code that conjures up INQUIRY responses for
certain specific old devices.
2001-11-28 01:04:49 +00:00
dc2a9f16a0
don't allocate a mbuf cluster if we don't need.
2001-11-27 21:40:55 +00:00
73001afb44
When opening the mouse port, be sure to open it for 8 data bits.
...
The sun2 PROM can leave the port configured for 7.
2001-11-27 16:19:43 +00:00
afdb23ddea
Set ONES (must be ones) bits in tmd1 of tx descriptors.
...
This fix avoids VMware 3.0/WinXP to crash.
2001-11-27 13:49:03 +00:00
b2dc60987f
add isapnp frontend for cs driver.
2001-11-27 12:23:31 +00:00
e9dd0249c8
regen for IBM EtherJet ISA.
2001-11-27 12:21:49 +00:00
dcb7807cbe
add IBM EtherJet ISA.
2001-11-27 12:20:39 +00:00
60adc294b9
Regen.
2001-11-27 03:25:53 +00:00
f349dc8748
cvs -q update -j1.147 -j1.148 pcmciadevs
2001-11-27 03:25:16 +00:00
f0002ba642
Added macros for the bits in the SYSBUS byte, and macros
...
for the i82596 PORT access interface, from the documentation
for that chip. These help clarify writes to the SYSBUS
part of the SCP, and PORT usage by i82596-aware drivers.
2001-11-26 23:30:59 +00:00
83c021b2a7
Added quirk entries for Adaptec and Emulex SCSI interposer boards.
...
Decode a limited set of SASI/SCSI-1 sense codes, and under sun2
only, conjure up INQUIRY responses for these boards.
2001-11-26 20:39:29 +00:00
380fd47edb
Change wchan name for usb task thread.
2001-11-26 20:16:55 +00:00
ec3eeda2fe
Use bus_space on sun2.
...
Update the comment to match list of bus_space-using ports.
Removed some old unused asm() labels.
2001-11-26 20:15:48 +00:00
adbdd3e6f6
add $NetBSD$ and copyright notice and rcsid.
2001-11-26 19:55:38 +00:00
f6b0ec4cce
- regen for IBM SCSI PCMCIA.
2001-11-26 19:49:34 +00:00
64b2149540
add IBM SCSI PCMCIA.
2001-11-26 19:48:55 +00:00
dbaca00330
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic
...
and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 19:17:05 +00:00
9324423e84
remove "stg", that I accidentally commited.
...
thanks, Tsutsui-san.
2001-11-26 14:21:33 +00:00
b43f7a4791
add pcmcia frontend for cs driver.
2001-11-26 11:17:34 +00:00
7af704bf48
- add power management code.
...
- use ether_ioctl instead of its own code.
(make ifconfig down works properly.)
2001-11-26 11:14:50 +00:00
e75321130b
Back out new "hme" driver because it causes a performance regression on
...
"netio" on an U5.
2001-11-26 10:39:29 +00:00
7287466499
Bug fixes for VLAN handling supplied by Klaus Klein in private e-mail.
2001-11-26 06:51:12 +00:00
a103dcf333
support BUFFALO CFtype WLAN card
...
wi0 at pcmcia1 function 0: BUFFALO, WLI-CF-S11G,
wi0: 802.11 address 00:07:40:0f:03:ea
wi0: using RF:PRISM2.5 MAC:ISL3873, Firmware: 1.3 variant 4
2001-11-26 04:34:56 +00:00
1c1ddcc034
regen
2001-11-26 04:19:12 +00:00
3dcc51c184
add device: BUFFALO AirStation CFtype WLAN Card
2001-11-26 04:18:26 +00:00
969cf96980
make it compile without INET
2001-11-26 02:41:20 +00:00
879d358535
* Add entry for Dolphin Peripherals 4036 dual-serial card.
...
(Note: PCI ID conflicts with Dolphin Peripherals 4025; a 4025 may
attach two serial units, but I cannot find one to test).
2001-11-26 00:41:24 +00:00
99756bfe86
Pull in Jason Wright's latest changes to the "hme" driver from OpenBSD.
...
This supports direct DMA from and into mbuf cluster, and VLAN
handling is done a bit differently.
2001-11-25 22:12:01 +00:00
a6ba091eef
Add a quirk for Olympus C-1. From FreeBSD (by iedowse)
2001-11-25 19:15:46 +00:00
596224e54f
Pay attention to the timeout value passed down by the scsipi layer.
2001-11-25 19:05:22 +00:00
6fcfa35836
Regen.
2001-11-25 17:17:42 +00:00
f070b78088
Add Olympus C-1.
2001-11-25 17:17:22 +00:00
ce170de115
- add (partial?) i/o mode support.
...
- add partial cs8920 support.
- add detach code.
- add a quirk for EtherJet PCMCIA with cardbus bridge.
(above "partial" means "engough to support EtherJet PCMCIA")
2001-11-24 20:18:55 +00:00
67238c609c
The header part of driver overhault:
...
* simplify and clean the attach code a lot, and support the 'drive'
locator
* pass proper dev_t to readdisklabel() - formerly, the passed value was
completely broken (used incorrect major and wrong minor), but worked
by accident
* worker thread is now spawned per controller, rather than per-drive;
i/o cannot be done concurrently by different drivers, only one
i/o can be pending at any time
* simplify the command queue code, just sleep appropriately when
!poll case, g/c 'async' code formerly needed, move the bio code
from ed_mca.c to edc_mca.c:edc_bio()
* other misc cleanups
2001-11-24 12:46:15 +00:00
211d58f020
don't need opt_mcaverbose.h here
...
print 'memory configured' instead of just 'configured' for memory expansion
cards
2001-11-24 12:33:14 +00:00
bb23eba3d8
MCA DMA hooked via bus_dma, so remove one
...
add entry regarding AHA-1640 (the driver needs testing)
2001-11-23 22:57:34 +00:00
07312f0fbb
Convert over to use the new MCA DMA facilities, which encapsulate
...
the MCA DMA controller access. This also means we gain >16MB RAM support.
While here, overhaul the driver to saner state, especially:
* simplify and clean the attach code a lot, and support the 'drive'
locator
* pass proper dev_t to readdisklabel() - formerly, the passed value was
completely broken (used incorrect major and wrong minor), but worked
by accident
* worker thread is now spawned per controller, rather than per-drive;
i/o cannot be done concurrently by different drivers, only one
i/o can be pending at any time
* simplify the command queue code, just sleep appropriately when
!poll case, g/c 'async' code formerly needed, move the bio code
from ed_mca.c to edc_mca.c:edc_bio()
* put all string arrays used by edc_dump_status_block() within #ifdef EDC_DEBUG,
and use numbers instead if it's not defined; this cuts object size by 5KB
* other misc cleanups
2001-11-23 22:53:09 +00:00
90fac765da
add 'drive' locator to mca edc
2001-11-23 22:35:46 +00:00
71651851a4
Match against EPSON GT-9700F.
2001-11-23 10:31:54 +00:00
674f6e4d18
Regen.
2001-11-23 10:30:49 +00:00
9930efdacf
Add product id of EPSON GT-9700F.
2001-11-23 10:29:30 +00:00
fe972558c0
Use __func__ instead of __FUNCTION__.
2001-11-23 10:20:47 +00:00
cdc819cd8a
Improve xfer abort sequence.
...
Fix another bug in qTD chain allocation.
2001-11-23 01:16:27 +00:00
6d8419a6cc
Handle Zip quirks differently.
...
Ugh! This driver need major overhaul.
2001-11-23 01:15:28 +00:00
6f95b070ca
Update mass storage protocol numbers.
2001-11-23 01:14:45 +00:00
1b1e4bd3d1
Remove hardcoded values for HZ (under different names!) from mcclock.c
...
and clock_machdep.h, so that now HZ can be any supported frequency of
the mc146818a/ds1287a RTCs.
Tested at 256Hz and 2048Hz.
2001-11-23 01:04:11 +00:00
37c8189778
Correct a comment.
2001-11-22 21:59:33 +00:00
d5c1ba9ed2
add a comment clarifying the DMA support, g/c the commented
...
out isa_dmacascade() call
some minor intendation changes, while here
2001-11-22 20:25:58 +00:00
5bf4d5554b
use little-endian crc on multicast hash for admtek chips.
2001-11-22 05:03:04 +00:00
7467533f5a
Improve dump routine slightly.
2001-11-22 04:31:01 +00:00
6e3a855c27
Fix a bug in qTD chain allocation.
...
Fix a qTD leak.
Handle out of memory conditions better.
My USB 2.0 CD-RW now mounts nicely and I can access files.
Performance is still lacking (it's at about 2Mbyte/s).
2001-11-22 04:20:49 +00:00
b5e0d97bf7
Add some DIAGNOSTIC tests.
2001-11-22 00:57:14 +00:00
37f2beed3e
Close multiplxees BEFORE removing the event variable they are
...
using (an interrupt at the wrong point caused disaster).
2001-11-22 00:54:23 +00:00
1fd7eeefcd
"than" instead of "then".
2001-11-21 19:14:19 +00:00
1f1e26bd6d
Presence looks better with a 'c' instead of an 's'.
2001-11-21 19:01:31 +00:00
55e6492076
Explicitly write explicitly without a second e.
2001-11-21 17:33:26 +00:00
bc136d1c2e
Make it compile without debug.
2001-11-21 16:22:58 +00:00
9dae283057
Add another "feature".
2001-11-21 16:12:56 +00:00
b2dc7b3fd3
Follow a safer protocol when updating the QH.
...
The EHCI driver isn't really working properly, but now the SCSI driver
correctly identifies my CD-RW drive! :-)
2001-11-21 16:05:13 +00:00
2c4813fa9d
Use NULL not 0.
2001-11-21 15:48:37 +00:00
df1a49923c
Fix indentation and typos.
2001-11-21 15:37:41 +00:00
5539d5afe6
Implement (incorrect?) data toggle clear method.
...
Implement allocation of qTD chains.
2001-11-21 14:00:12 +00:00
6bba920516
Wrap dump routine prototypes in #ifdef USB_DEBUG
2001-11-21 13:44:47 +00:00
ca0b46691f
Mask correct interrupt after error interrupt.
2001-11-21 13:43:38 +00:00
02f41ec3e6
Mask the correct interrupt after a door bell interrupt.
2001-11-21 13:42:19 +00:00
0adc2bbba2
Implement bulk transfers.
2001-11-21 13:04:50 +00:00
2d72c2726c
Add some interrupt processing.
2001-11-21 12:28:23 +00:00
4d4da7e06a
Fix typo in comment.
2001-11-21 12:25:55 +00:00
eca8404326
Don't use __func__ as variable. It prevents compilation.
...
Use __FUNCTION__ instead.
2001-11-21 09:08:38 +00:00
1029005107
Pay more attention to if the HC is being unplugged.
2001-11-21 08:18:39 +00:00
bf755aea42
make it compilable without OHCI_DEBUG
2001-11-21 05:52:50 +00:00
c907a8fbbd
Add missing }
2001-11-21 02:47:07 +00:00
4f7b354305
Set up control xfers.
...
Handle xfer timeouts.
Better debug messages.
2001-11-21 02:44:30 +00:00
28a6a57942
Use a task to perform the timeout abort so we have a process context when
...
sleeping.
2001-11-21 02:41:18 +00:00
5506bb0f06
Some more debug stuff.
2001-11-21 02:39:31 +00:00
2478d1b320
Cast some args to bitmask_snprintf().
2001-11-21 02:38:35 +00:00
b171d0908b
Create a special kernel thread to run the usb short lived tasks (instead
...
of using the device discovery threads).
2001-11-20 23:53:26 +00:00
9716a5f26d
Don't bother with interrupts when being disconnected.
2001-11-20 21:12:46 +00:00
a8de831b24
Support port indicator light.
2001-11-20 16:25:35 +00:00
2f560c9410
Sanity check max packet lengths.
2001-11-20 16:09:01 +00:00
7679101a11
Add a comment.
2001-11-20 16:08:37 +00:00
e5353fd3b5
Use longer reset for root hubs (as told in the spec).
2001-11-20 16:08:10 +00:00
0fa231134c
- replace "defopt" with "defparam" for options which must take a value,
...
as config(8) will warn for value-less defparam options
- minor whitespace/formatting cleanup
- consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 14:34:18 +00:00
8366f16a80
Don't wait for door bell interrupt when controller has been disconnected.
2001-11-20 14:28:44 +00:00
86e6ea35eb
Update for new speed handling.
2001-11-20 13:50:07 +00:00
a598bed92e
Simplify async list handling.
2001-11-20 13:49:23 +00:00
b38958f960
Use device speed in setup.
...
Simplify async list handling.
2001-11-20 13:49:07 +00:00
7e4459fe10
Keep track of device speed for USB 2.0.
2001-11-20 13:48:03 +00:00
482dbdf4e3
More USB 2.0 definitions.
2001-11-20 13:46:09 +00:00
99bccc3cab
- pull in opt_kgdb.h where necessary
...
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup
2001-11-20 08:43:19 +00:00
d11d1bd6fe
Cleanup some whitespace that indent got wrong a long time ago.
2001-11-20 02:37:29 +00:00
859356d03b
Add a new quirk value PQUIRK_CAP_SYNC for SCSI1 devices which support
...
sync transfers, and set PERIPH_CAP_SYNC for them in scsi_probe_device().
As per discussion on tech-kern.
2001-11-19 22:50:00 +00:00
eefc317219
Remove duplicate struct scsipi_start_stop.
2001-11-19 17:18:08 +00:00
27e3d258cd
Floptical drive needs PQUIRK_NODOORLOCK as well.
2001-11-19 16:54:20 +00:00
98576a36a5
regenerate for 1.147
2001-11-19 05:25:22 +00:00
cd84d65811
Merge from FreeBSD:
...
o Add devices from OpenBSD
o Minor sorting problems in my sorting attempt.
o A few additional -1 vendors for better card pattern generation.
o Add Zoom Air_4000 (needs to be added to awi)
o Add Netgear FA411 info (needs to be added to ne, plus quirks/fixes
to base pccard stuff before it will work).
o Merges through FreeBSD 1.22
2001-11-19 05:24:26 +00:00
2db9b8d2c8
Start of pipe open routine.
2001-11-19 02:57:16 +00:00
dfbba4149c
Injecting events into a mux that is not open is not an error.
2001-11-19 00:37:22 +00:00
ae27210d46
Insite Floptical drive needs PQUIRK_NOLUNS.
2001-11-19 00:22:47 +00:00
56cffa29dc
Add Titan 200H (from Wojciech Puchar)
2001-11-18 20:20:25 +00:00
c8f45396b3
Fix formatting of scsi_quirk_patterns[] and wrap long lines.
2001-11-18 17:22:43 +00:00
99c9ca8ab5
ANSIfy driver.
2001-11-18 17:15:48 +00:00
bf5b461387
Don't use a static variable in the power hook. It doesn't work with more
...
than one device.
2001-11-18 16:59:08 +00:00
aca8e01877
- Use MI ADAPTER_REQ_SET_XFER_MODE callback
...
- Move values in sc_sync[] member to sc_tinfo[]
- Change some u_int8_t values to int
- Remove unused wide negotiation states
- Misc cleanup
2001-11-18 14:50:11 +00:00
689089f7a9
- Use MI ADAPTER_REQ_SET_XFER_MODE callback.
...
- Nuke some magic numbers.
2001-11-18 14:33:10 +00:00
acd87a7687
Misc cleanups:
...
- correct trm_clock_period[] value
- pass BUS_DMA_{READ,WRITE,STREAMING} to bus_dmamap_load() as appropriate
- make sure to call bus_dmamap_unload() even after request sense
- saved srb params on request sense do not seem to be used,
so remove them from struct trm_srb
- handle target status more properly in trm_srb_done() and no need
to handle error retry in lower driver layer
- fix some comments
XXX Maybe need more cleanup around TQING for MI SCSI callback..
2001-11-18 13:02:30 +00:00
dbcf46ce8a
match the linksys prism2 card.
2001-11-18 04:27:49 +00:00
9d4995d7d6
regen
2001-11-18 04:26:16 +00:00
fa216ca465
add entries to allow one to match:
...
The Linksys Group, Inc., Instant Wireless Network PC Card, ISL37300PRevA
2001-11-18 04:25:43 +00:00
275c5352b7
add Trident 4DWAVE based (4DWAVE DX/NX,SiS 7018,ALi M5451) PCI audio driver
2001-11-18 03:16:02 +00:00
0f70418027
Add more fields to hardware structs.
...
Add memory allocation for various data structures.
2001-11-18 00:39:46 +00:00
11a1ddc5dd
- make sure to call bus_dmamap_unload() even after request sense
...
- fix usage of scb flags
- misc cleanup
2001-11-17 21:26:12 +00:00
4c7e639df1
fix a trivial lint warning
2001-11-17 05:31:27 +00:00
1f6462461a
Make it possible to report device speeds with ioctl(USB_DEVICEINFO).
2001-11-17 01:49:53 +00:00
25ffd2ae73
Regen.
2001-11-17 01:44:03 +00:00
c434bdf8c7
Yet another device.
2001-11-17 01:43:40 +00:00
1466b9ca1d
Back out the last two changes I made to this driver -- some people
...
have reported lossage.
2001-11-17 00:56:04 +00:00
b2b2b2b448
Implement port reset sequence correctly.
2001-11-16 23:52:10 +00:00
bdb84bd0cd
Regen
2001-11-16 18:34:08 +00:00
d10a585999
add another USR modem.
2001-11-16 18:33:35 +00:00
b10f58ec3e
Add ehci.
2001-11-16 17:10:30 +00:00
f73c358f8c
Add some more data structure defs.
2001-11-16 15:33:13 +00:00
3b323cfaae
Better error message.
2001-11-16 02:21:54 +00:00
3db4a768d4
Handle devices that disappear during reset gracefully.
2001-11-16 01:57:47 +00:00
07ea2e28cb
Recognize port status changes.
...
Hand over low and full speed devices to companion controller.
2001-11-16 01:57:08 +00:00
122d2863d8
Add root hub emulation.
2001-11-15 23:25:09 +00:00
1952efa437
Support Ultra/100 on CMD 0649.
2001-11-15 20:48:17 +00:00
b684cbc2a7
usbd_interface2device_handle() cannot fail.
2001-11-15 15:15:58 +00:00
2565646230
don't need <sys/types.h> when including <sys/param.h>
2001-11-15 09:47:59 +00:00
0b74b95459
If the controller doesn't support UDMA, don't allow enabling UDMA via
...
config flags.
2001-11-14 20:18:11 +00:00
effc318eca
Regen.
2001-11-14 17:50:44 +00:00
77a68c4bf2
Add another printer dongle.
2001-11-14 17:50:21 +00:00
6a161b0a72
Add a DISGNOSTIC message.
2001-11-13 17:45:07 +00:00
071697f107
fix RCSID
2001-11-13 13:32:34 +00:00
a4bae8b066
add/cleanup RCSID
2001-11-13 13:14:31 +00:00
13ac430285
add RCSID
2001-11-13 13:01:57 +00:00
0e9163223a
cleanup RCSID
2001-11-13 13:01:22 +00:00
f61cbe7489
add RCSID
2001-11-13 12:51:12 +00:00
dca6ccc83f
add/cleanup RCSID
2001-11-13 12:49:45 +00:00
b84f53efc5
add RCSID
2001-11-13 12:47:33 +00:00
05b019ba0f
add RCSID
2001-11-13 12:24:11 +00:00
cec12bf775
Remove trailing `b' in some numbers for lengths. It just makes them look
...
like hex.
2001-11-13 08:01:40 +00:00
3f7d8d47b6
add RCSID
2001-11-13 08:01:09 +00:00
d6e38a1474
More test for NULL pipes.
2001-11-13 07:59:32 +00:00
9dcae667ee
Small changes to behaviour when disconnecting.
2001-11-13 07:57:22 +00:00
9d2580ff16
add RCSID
2001-11-13 07:56:39 +00:00
b93fa89e60
Fix pasto in a debug printf.
2001-11-13 07:56:04 +00:00
8b1e2b3b6d
Add some #endif comments.
2001-11-13 07:55:30 +00:00
4be2902b43
regen for RCSID
2001-11-13 07:54:18 +00:00
6f230ccce0
add RCSID to generated .c file
2001-11-13 07:52:41 +00:00
9048aaae21
add RCSID
2001-11-13 07:48:40 +00:00
8b7bb91219
add RCSID
2001-11-13 07:38:28 +00:00
57119f25e5
cleanup RCSID
2001-11-13 07:35:02 +00:00
045ae768cb
add RCSID
2001-11-13 07:30:37 +00:00
ab5d9d2b0c
add RCSIDs
2001-11-13 07:24:43 +00:00
9ab2c47148
cleanup RCSID (to be consistent with use in rest of kernel)
2001-11-13 07:23:15 +00:00
a3746e00b7
add RCSIDs
2001-11-13 07:11:12 +00:00
cb1dc621e6
add/cleanup RCSIDs
2001-11-13 07:00:23 +00:00
7ba10b3532
add RCSIDs
2001-11-13 06:54:32 +00:00
640249d1e9
add RCSIDs
2001-11-13 06:28:55 +00:00
6a3181d38f
add/cleanup RCSIDs
2001-11-13 06:26:09 +00:00
667807e40c
add RCSIDs
2001-11-13 06:24:53 +00:00
139747fb15
add/cleanup RCSIDs
2001-11-13 06:17:46 +00:00
b589588216
add RCSIDs
2001-11-13 06:08:32 +00:00
98bd235d29
remove superfluous NSEQUENCER > 0 test
2001-11-13 06:07:13 +00:00
2bbe2de647
add RCSIDs
2001-11-13 05:32:49 +00:00
e5a47b8cfa
Include stdio.h when compiled in userland to pull in declaration of printf etc.
2001-11-13 03:12:44 +00:00
9380edd8ad
In fb_bell call kbd_docmd only #if NKBD > 0.
...
This allows kernels without kbd at zs to be linked.
(JavaStation-1 does not have zs, it uses pckbc instead)
2001-11-12 08:14:30 +00:00
e6de03653d
Don't set 'atapi_probe_device' if no atapi busses are being configured.
2001-11-11 23:21:18 +00:00
c873b07b2d
After modifying transmit descriptors, write-back cache needs to be flushed.
...
Fixes DEFTA on R4x00 DECstations.
2001-11-11 18:47:03 +00:00
cd67a5ce17
Add polish keyboard map, from Dawid Szyma_ski <dawszy@netbsd.lubin.pl>.
2001-11-11 11:48:56 +00:00
78b0b559e3
- Fix some bogus comments.
...
- Add a missed splx(s) in error case.
2001-11-11 05:28:55 +00:00
09b14fa42a
Oops, missed one.
2001-11-11 00:34:52 +00:00
82540eeaca
fix a couple of signed->unsigned warnings lint found
2001-11-11 00:25:23 +00:00
ddf09edfc0
merge duplicate register definitions.
2001-11-11 00:24:16 +00:00
257a5919a3
Get rid of duplicate RID definitions.
2001-11-11 00:16:07 +00:00
7a702dcf66
trivially rename some macro parameters to avoid lint warnings.
2001-11-10 22:48:09 +00:00
48ea68d3d9
Make wsdisplay_set_console_kbd() a little less twisted.
2001-11-10 17:14:51 +00:00
9a444aef81
Get rid of unused abort_handle.
2001-11-10 17:11:38 +00:00
21f0709fbe
Abort any xfers on the control pipe before closing it on detach.
2001-11-10 17:10:42 +00:00
ff875692db
Improve dump routines.
2001-11-10 17:09:28 +00:00
3d3d59f852
Fill the companion controller array.
2001-11-10 17:07:21 +00:00
1b0216af5c
Add some register defines.
...
Print companion controllers.
2001-11-10 17:06:11 +00:00
3d963db4f2
Add some dump routines for debugging.
2001-11-10 16:54:56 +00:00
02186d8353
Small portability improvement.
2001-11-10 16:53:32 +00:00
b1ec255377
Add a "firstbus" argument to pci_configure_bus(), indicating the
...
first bus number to use, rather than always assuming that we should
start at bus #0 .
2001-11-09 19:29:12 +00:00
716af300ee
In query_bus(), use the parent pciconf_bus_t's PCI chipset tag,
...
not the new bus's (which is potentially uninitialized when some
calls are made).
2001-11-09 19:20:19 +00:00
495b9bd7d5
Fix a bug in xfer abort processing when the HC executes ahead of what
...
the driver aborts.
Don't block RHSC interrupts.
2001-11-09 15:01:57 +00:00
3dd8433864
Add a debug message.
2001-11-09 14:59:11 +00:00
1315ed7da5
Regen.
2001-11-09 05:49:53 +00:00
1018a07d67
Add a device (from OpenBSD).
2001-11-09 05:49:09 +00:00
64a6ea2e08
Regen.
2001-11-08 17:05:58 +00:00
c7a7458e1e
PR/14503: Cesar Crusius: Add Xircom XE2000.
2001-11-08 17:05:42 +00:00
fd0fac251e
Regen w/ devlist2h.awk ver 1.4.
2001-11-08 09:08:41 +00:00
ichiro