kleink
0fc3ae7e76
Add (some) register definitions for the Motorola MPC105 PCI Bridge/Memory
...
Controller (PCIB/MC).
2001-12-10 12:09:33 +00:00
augustss
aa816a6d89
Regen.
2001-12-10 03:36:54 +00:00
augustss
9cfe511c73
Add some devices.
2001-12-10 03:36:12 +00:00
veego
9d39bbf3a8
Support for dvd region code (RPC).
2001-12-09 22:56:10 +00:00
manu
3cdc6f6197
Changed clocktl interface to use syscallargs structures
2001-12-09 16:10:43 +00:00
fvdl
14deefd5b1
pckbd_enable is called during autoconfig. Using pckbc_enqueue_cmd at
...
that time will have bad results, such as queue corruption because
of multiple TAILQ_INSERTs, etc, because it's not designed to work
in an interrupt/context-free environment. Use pckbc_poll_cmd instead.
2001-12-09 13:42:01 +00:00
pk
80c46be6c1
KBD_BPS => KBD_DEFAULT_BPS (sync with ms driver nomenclature).
2001-12-09 12:03:32 +00:00
pk
5962ca0a49
Allow SUN_MS_BPS to override the mouse baud rate at all times. (see PR14774).
2001-12-09 12:02:06 +00:00
gehenna
c9b557f40e
Add an item
2001-12-09 03:06:46 +00:00
cyber
d6671330e0
The prom doesn't setup the fb if its not set to console.
...
We shouldn't try to configure it in that case.
This will make serial console work. completes fix to PR#14213
(Private email determined PR author was using serial console.)
2001-12-08 19:42:45 +00:00
soren
a5812755ac
Pass sbus addresses to sbus_bus_map(), not sbus_bus_addr()'d ones.
2001-12-08 05:36:31 +00:00
matt
ee7afa77b2
Fix sense of if to grab address from alternation if srom is not in isv
...
format on Davicom chips. Add sparc specific case in this case to call
myetheraddr if oui is all 0s (for Netra X1).
2001-12-07 21:13:58 +00:00
fredette
178a439b58
Regen.
2001-12-07 14:21:18 +00:00
yamt
272f471ee0
add detach support for st.
2001-12-07 11:26:30 +00:00
onoe
e7357c0007
Regen: Add HPB and LPC functions of 82801BAM.
2001-12-07 08:00:35 +00:00
onoe
c971f89005
Add HPB and LPC functions of 82801BAM.
2001-12-07 07:59:24 +00:00
cjs
b445461d1e
Rebuild these to fix the "generated from" line.
2001-12-07 07:43:10 +00:00
cjs
9dd4ce03d0
Add Palm m500/m505 and Sony Clie USB cradle device IDs.
2001-12-07 06:59:44 +00:00
jdolecek
27b0006d34
it doesn't make sense to wait for resources during autoconfiguration
2001-12-06 21:04:27 +00:00
augustss
ba528e6dec
Small change to Christos' fix: allow malloc() to return NULL, but complain
...
if it does.
2001-12-06 20:00:58 +00:00
christos
94074f1212
change the malloc arg from NOWAIT to WAITOK; pointed out by lennard.
2001-12-06 19:54:02 +00:00
christos
dbabce6bb7
PR/14852: Martin Husemann: Allocate the slotdata the the probed slot before
...
we call the configuration function. Thanks lennard for pointing it out.
XXX: Someone should look this over and make sure that the current strategy
makes sense.
2001-12-06 19:52:56 +00:00
kleink
bc1f5761e3
Recognize the MK48T18 as well (differs from the MK48T08 only in packaging
...
options and voltages).
2001-12-06 18:54:23 +00:00
augustss
22fd9bbb5f
Add IrDA related defines.
2001-12-06 17:00:26 +00:00
rafal
a76d350acc
Fix component class/types to match reality for SGI's ARCS, which is just
...
different enough from stock ARC to be annoying.
2001-12-06 14:59:02 +00:00
rafal
23e1fa1306
Fix PR 13465 by Krister Walfridsson: memory initialization used uninitialized
...
variable to start off the write pattern (how ironic! 8-).
2001-12-06 13:18:22 +00:00
msaitoh
72f2d1c3a3
#endif ... -> #endif /* ... */
2001-12-06 10:28:40 +00:00
augustss
604ea366d4
Restructure to get rid of size limit.
...
Fix return value bug.
2001-12-06 00:17:12 +00:00
augustss
5ef96ebab2
Don't crash on early calls to get the speeds.
2001-12-06 00:11:18 +00:00
augustss
ec901ec7fe
Regen.
2001-12-05 23:25:56 +00:00
augustss
12812553f8
Add a NEC USB 2.0 hub. (USB 2.0 hubs are very rare creatures at the moment!)
2001-12-05 23:25:31 +00:00
bouyer
3fe7074804
Compile with NWD == 0. Fixe kern/14844 by hamajima@nagoya.ydc.co.jp.
2001-12-05 20:43:00 +00:00
augustss
b24bbb4d82
Constify a little.
2001-12-05 20:00:15 +00:00
augustss
47fffba901
Add dongle specific code.
2001-12-05 19:59:54 +00:00
fredette
1a3eaeafd8
Now generate oosiop.out, the compiled 53c700 script.
2001-12-05 18:34:19 +00:00
fredette
ba3be8d408
Generated from oosiop.ss rev. 1.1:
...
Initial compiled script for 53c700.
2001-12-05 18:32:55 +00:00
fredette
60c77bb2f1
Added support for the Symbios/NCR 53c700 SCSI controller.
...
This chip is very similar to the 53c710, except that it's
missing a few registers, doesn't do relative jumps and
doesn't have the table-indirect addressing mode.
I have checked that this still generates the same output
on the existing scripts for the other chips.
2001-12-05 18:31:53 +00:00
fredette
8dce160cd1
New script for the Symbios/NCR 53c700 SCSI controller.
...
This is closely related to osiop.ss, the script for the
53c710.
2001-12-05 18:27:13 +00:00
augustss
bd8b498c42
Do SIR framing on incoming frames.
2001-12-05 15:51:11 +00:00
augustss
8c2cf4c7d8
Break out SIR framing to its own file.
2001-12-05 14:50:13 +00:00
wiz
31fcd50433
Use defparam instead of defflags for some bktr(4) related options that need
...
a value. Add BKTR_REVERSE_MUTE to defflags.
2001-12-05 11:41:16 +00:00
simonb
20a3ef2b53
Remove some debug printf()s.
2001-12-05 10:54:51 +00:00
augustss
9c8fe0b8c5
Put bytes on right q.
2001-12-05 04:31:02 +00:00
augustss
0913a897a5
Set error code for IRDA_RESET_PARAMS.
2001-12-05 04:30:24 +00:00
augustss
af5eb6fc8c
Fix some minor bug.
...
Add more debugging.
2001-12-05 04:07:06 +00:00
augustss
b81ddff1a7
Reset parameters on open.
2001-12-05 04:06:32 +00:00
simonb
a9f73b2015
s/defopt/defparam/ in previous; from lukem.
2001-12-05 03:50:09 +00:00
simonb
8a32c6fbfa
Change PCI_NETBSD_ENABLE_IDE back to a defopt - it's a mask.
2001-12-05 03:24:57 +00:00
augustss
037eb62a0f
Mention that much of the code was stolen from Tommy Bohlin.
2001-12-05 01:13:58 +00:00
augustss
3ead5262dd
Add some dongle support ioctl()s.
2001-12-04 23:33:33 +00:00
augustss
527fff66c0
Change speed setting a little.
2001-12-04 21:50:50 +00:00
augustss
e0b032d651
Add ir/ to SUBDIR.
2001-12-04 21:43:44 +00:00
augustss
64a9c02472
Implement speed setting.
2001-12-04 20:53:21 +00:00
jdolecek
a275d0a6b9
clarify copyright - this is all freshly written, no older code used
2001-12-04 20:51:23 +00:00
jdolecek
7a12ca98ab
Make this NCR 53C90 driver work, using the chip information from
...
Tymm Twillman's Linux mca_53c9x driver.
Tested with external ZIP100 only.
2001-12-04 20:47:58 +00:00
sommerfeld
ceb358f80c
Fix so these files build with options DEBUG enabled.
...
The change to edc_mca.c may not work as I don't have any mca hardware.
2001-12-04 20:00:15 +00:00
augustss
636b7788a1
Implement input processing (untested).
2001-12-04 19:56:43 +00:00
augustss
1db6a7d9df
Simplify interface to irframe.
2001-12-04 19:56:17 +00:00
christos
4950567ffc
Regen.
2001-12-04 18:46:51 +00:00
christos
9925bfcf9f
PR/13711: Peter Seebach: Symbol's Spectrum24 pcmcia/prism2 card isn't probed.
2001-12-04 18:46:30 +00:00
bjh21
5aee55caae
New file, describing what little I know of the layout of the Oak SCSI card.
2001-12-04 18:40:14 +00:00
wiz
b4371d47f5
Replace some misuses of "then" with "than".
2001-12-04 17:56:30 +00:00
gmcgarry
6dbb6e893b
Simply entries added in previous.
2001-12-04 04:30:22 +00:00
augustss
5f99a98472
Add irframetty driver for IrDA frames over serial lines.
...
THIS MOST DEFINITELY DOES NOT WORK. IT'S VERY INCOMPLETE.
2001-12-03 23:32:32 +00:00
jdolecek
08733c9d51
add NCR_VARIANT_NCR53C90_86C01 "NCR53C90 (86C01)"
...
treat exactly like NCR_VARIANT_ESP100
2001-12-03 23:27:31 +00:00
enami
5eb74d8bbe
Use correct format letter for chp->channel.
2001-12-03 11:07:34 +00:00
augustss
02aa2a59bc
Handle vendor/product lookup with a common routine.
2001-12-03 01:47:12 +00:00
bouyer
bfc80822c7
Update my copyrigth.
2001-12-03 00:20:22 +00:00
bouyer
4ca5497111
Allow wd to attach to something else than wdc/pciide (like USB<->ATA bridges):
...
- move some functions from ata.c to ata_wdc.c or wdc.c.
- add callbacks to struct ata_bustype so that wd.c doesn't call directly
functions from the lower level driver.
2001-12-03 00:11:15 +00:00
augustss
23d4159897
Add a subroutine to search for a vendor/product pair.
2001-12-02 23:25:25 +00:00
bouyer
65768c08e2
No need to include atavar.h here.
2001-12-02 22:59:40 +00:00
bouyer
4809ad42cb
Clean up attach of wd/atapibus:
...
kill ata_atapi_attach. Change atapibus to use a struct scsipi_channel instead
of ata_atapi_attach as attach arch. Create a ata_device, compatible with
scsipi_channel, to attach wd.
2001-12-02 22:44:32 +00:00
augustss
194762be5b
Touch up a little. No functional change.
2001-12-02 20:29:55 +00:00
augustss
1187860bcf
GC unused stuff.
2001-12-02 20:06:00 +00:00
jdolecek
f803294ead
use the new MCABUS_DMA_16BIT flag to use 16bit DMA (not implicit anymore)
2001-12-02 17:04:41 +00:00
augustss
2a22b00459
Add some IrDA names.
2001-12-02 16:32:04 +00:00
augustss
766e28edd3
Add driver for the Toshiba's Oboe IrDA chip. From Jan Sparud.
2001-12-02 16:30:30 +00:00
augustss
cf8a8cbe20
Fixes from Jan Sparud's code:
...
Make read and write methods symmetrical, add poll method.
2001-12-02 16:29:25 +00:00
bjh21
1208c816b3
Add (#ifdef'ed out) code to support the PDMA hardware on the Oak SCSI card.
...
Unfortunately, this code seems not to work at present. I don't yet know why.
2001-12-02 14:49:32 +00:00
bjh21
4e3bf132c0
Add comments naming our private-use characters (in lower case, to make them
...
distinct from real Unicode characters).
2001-12-02 12:46:32 +00:00
augustss
b540959734
Add framework for Ir devices. The irframe device is for delivering IrDA
...
frame to user land and the cir device is for consumer Ir (remote controls).
This code is only partially finished, but the irframe device works (given
a low level driver for the actual IrDA device).
2001-12-02 10:44:43 +00:00
gmcgarry
adb908503d
Add identifiers for HP devices.
2001-12-02 01:17:51 +00:00
ross
43fe22fed0
Revert previous; the _e003U definition is used elsewhere.
2001-12-02 01:04:26 +00:00
bjh21
15d94a4c59
On a VT100, the "scanline 5" character is also used for box drawing, so
...
represent it as U+2500 (BOX DRAWINGS LIGHT HORIZONTAL). This makes NetHack
DECgraphics mode work properly on a wscons console using an IBM-encoded font.
2001-12-01 16:07:58 +00:00
jdolecek
c65c74ab28
regenerate (allocate identifier for NCR 53c90)
2001-12-01 10:44:35 +00:00
jdolecek
8272a293b7
allocate identifier for NCR 53C90
2001-12-01 10:43:36 +00:00
jdolecek
4b334401ca
Nonworking NCR 53c90 attachment. I don't get any interrupts from
...
the device yet, need to find real NCR53c90 docs to figure out what's wrong.
2001-12-01 10:42:38 +00:00
enami
e69c410de5
Shorten wmesg so that they can be distinguished in ps/top output.
2001-12-01 09:42:39 +00:00
enami
b56cddb826
Fix null pointer dereference when EHCI_DEBUG is defined (and
...
debug is enabled).
2001-12-01 09:39:32 +00:00
bouyer
c6c2c476eb
Hum, no need to print a message each time we're waiting for the drive.
2001-12-01 00:05:04 +00:00
bouyer
e6922f82d6
Various quirks for the ATAPI OnStream DI-30, mostly from the FreeBSD driver.
...
Many thanks to Chris Pinnock for giving me remote access to his hardware.
2001-12-01 00:03:45 +00:00
bouyer
cd8d64fe2b
For ATAPI tape drives, poll for DSC (using a callout), to get the real
...
status of the command, and make sure the drive is ready for the next one.
2001-12-01 00:00:29 +00:00
augustss
2781ac8e07
Regen.
2001-11-30 13:41:17 +00:00
augustss
a287e24799
Add new devices. From URA Hiroshi in PR 14790.
2001-11-30 13:41:00 +00:00
thorpej
33bfd7be53
Fix typo in copyright notice.
2001-11-29 17:15:44 +00:00
wiz
e0492a661d
Update note about ioctl tsleep error with error report.
2001-11-29 15:01:19 +00:00
augustss
4b06fc39aa
Regen.
2001-11-29 13:58:41 +00:00
augustss
7a7025366e
Add some ISD devices.
2001-11-29 13:58:22 +00:00
augustss
c01e71bac5
Plug a memory leak in an error case.
2001-11-29 11:07:12 +00:00
thorpej
636e9cd08b
Add a "cacheline_size" argument to pci_configure_bus(). It is used
...
to set the cacheline size in the BHLC register. This should be the
size of the largest D-cache line on a system.
2001-11-28 23:48:34 +00:00
christos
c563f940be
ELINK_W4_UBYTESOK is 0x0d. This is probably why kim is getting x2 numbers
...
in stats.
2001-11-28 23:46:42 +00:00
jdolecek
8528a3409b
Match also product id 0x627c, it was omitted by mistake.
...
Problem pointed out by Carl Drougge on tech-kern, thanks!
2001-11-28 20:56:47 +00:00
lukem
ecb81c3f6d
- convert usage of "defopt" to "defflag" where the relevant option does
...
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups
2001-11-28 10:21:10 +00:00
lukem
71376e0797
use #ifdef MEMORY_DISK_DYNAMIC (for consistency with the rest of the kernel)
2001-11-28 05:55:34 +00:00
lukem
9f42ccc795
use #ifdef DDB (for consistency with the rest of the kernel)
2001-11-28 05:45:27 +00:00
lukem
371fd3fc10
use #ifdef RAID_AUTOCONFIG (for consistency with the rest of the kernel)
2001-11-28 05:39:13 +00:00
fredette
4fd267f75d
Added the new defopt SCSI_OLD_NOINQUIRY; this is used instead
...
of sun2 to wrap code that conjures up INQUIRY responses for
certain specific old devices.
2001-11-28 01:04:49 +00:00
yamt
dc2a9f16a0
don't allocate a mbuf cluster if we don't need.
2001-11-27 21:40:55 +00:00
fredette
73001afb44
When opening the mouse port, be sure to open it for 8 data bits.
...
The sun2 PROM can leave the port configured for 7.
2001-11-27 16:19:43 +00:00
onoe
afdb23ddea
Set ONES (must be ones) bits in tmd1 of tx descriptors.
...
This fix avoids VMware 3.0/WinXP to crash.
2001-11-27 13:49:03 +00:00
yamt
b2dc60987f
add isapnp frontend for cs driver.
2001-11-27 12:23:31 +00:00
yamt
e9dd0249c8
regen for IBM EtherJet ISA.
2001-11-27 12:21:49 +00:00
yamt
dcb7807cbe
add IBM EtherJet ISA.
2001-11-27 12:20:39 +00:00
enami
60adc294b9
Regen.
2001-11-27 03:25:53 +00:00
enami
f349dc8748
cvs -q update -j1.147 -j1.148 pcmciadevs
2001-11-27 03:25:16 +00:00
fredette
f0002ba642
Added macros for the bits in the SYSBUS byte, and macros
...
for the i82596 PORT access interface, from the documentation
for that chip. These help clarify writes to the SYSBUS
part of the SCP, and PORT usage by i82596-aware drivers.
2001-11-26 23:30:59 +00:00
fredette
83c021b2a7
Added quirk entries for Adaptec and Emulex SCSI interposer boards.
...
Decode a limited set of SASI/SCSI-1 sense codes, and under sun2
only, conjure up INQUIRY responses for these boards.
2001-11-26 20:39:29 +00:00
augustss
380fd47edb
Change wchan name for usb task thread.
2001-11-26 20:16:55 +00:00
fredette
ec3eeda2fe
Use bus_space on sun2.
...
Update the comment to match list of bus_space-using ports.
Removed some old unused asm() labels.
2001-11-26 20:15:48 +00:00
yamt
adbdd3e6f6
add $NetBSD$ and copyright notice and rcsid.
2001-11-26 19:55:38 +00:00
yamt
f6b0ec4cce
- regen for IBM SCSI PCMCIA.
2001-11-26 19:49:34 +00:00
yamt
64b2149540
add IBM SCSI PCMCIA.
2001-11-26 19:48:55 +00:00
yamt
dbaca00330
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic
...
and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 19:17:05 +00:00
yamt
9324423e84
remove "stg", that I accidentally commited.
...
thanks, Tsutsui-san.
2001-11-26 14:21:33 +00:00
yamt
b43f7a4791
add pcmcia frontend for cs driver.
2001-11-26 11:17:34 +00:00
yamt
7af704bf48
- add power management code.
...
- use ether_ioctl instead of its own code.
(make ifconfig down works properly.)
2001-11-26 11:14:50 +00:00
tron
e75321130b
Back out new "hme" driver because it causes a performance regression on
...
"netio" on an U5.
2001-11-26 10:39:29 +00:00
tron
7287466499
Bug fixes for VLAN handling supplied by Klaus Klein in private e-mail.
2001-11-26 06:51:12 +00:00
ichiro
a103dcf333
support BUFFALO CFtype WLAN card
...
wi0 at pcmcia1 function 0: BUFFALO, WLI-CF-S11G,
wi0: 802.11 address 00:07:40:0f:03:ea
wi0: using RF:PRISM2.5 MAC:ISL3873, Firmware: 1.3 variant 4
2001-11-26 04:34:56 +00:00
ichiro
1c1ddcc034
regen
2001-11-26 04:19:12 +00:00
ichiro
3dcc51c184
add device: BUFFALO AirStation CFtype WLAN Card
2001-11-26 04:18:26 +00:00
itojun
969cf96980
make it compile without INET
2001-11-26 02:41:20 +00:00
jonathan
879d358535
* Add entry for Dolphin Peripherals 4036 dual-serial card.
...
(Note: PCI ID conflicts with Dolphin Peripherals 4025; a 4025 may
attach two serial units, but I cannot find one to test).
2001-11-26 00:41:24 +00:00
tron
99756bfe86
Pull in Jason Wright's latest changes to the "hme" driver from OpenBSD.
...
This supports direct DMA from and into mbuf cluster, and VLAN
handling is done a bit differently.
2001-11-25 22:12:01 +00:00
augustss
a6ba091eef
Add a quirk for Olympus C-1. From FreeBSD (by iedowse)
2001-11-25 19:15:46 +00:00
augustss
596224e54f
Pay attention to the timeout value passed down by the scsipi layer.
2001-11-25 19:05:22 +00:00
augustss
6fcfa35836
Regen.
2001-11-25 17:17:42 +00:00
augustss
f070b78088
Add Olympus C-1.
2001-11-25 17:17:22 +00:00
yamt
ce170de115
- add (partial?) i/o mode support.
...
- add partial cs8920 support.
- add detach code.
- add a quirk for EtherJet PCMCIA with cardbus bridge.
(above "partial" means "engough to support EtherJet PCMCIA")
2001-11-24 20:18:55 +00:00
jdolecek
67238c609c
The header part of driver overhault:
...
* simplify and clean the attach code a lot, and support the 'drive'
locator
* pass proper dev_t to readdisklabel() - formerly, the passed value was
completely broken (used incorrect major and wrong minor), but worked
by accident
* worker thread is now spawned per controller, rather than per-drive;
i/o cannot be done concurrently by different drivers, only one
i/o can be pending at any time
* simplify the command queue code, just sleep appropriately when
!poll case, g/c 'async' code formerly needed, move the bio code
from ed_mca.c to edc_mca.c:edc_bio()
* other misc cleanups
2001-11-24 12:46:15 +00:00
jdolecek
211d58f020
don't need opt_mcaverbose.h here
...
print 'memory configured' instead of just 'configured' for memory expansion
cards
2001-11-24 12:33:14 +00:00
jdolecek
bb23eba3d8
MCA DMA hooked via bus_dma, so remove one
...
add entry regarding AHA-1640 (the driver needs testing)
2001-11-23 22:57:34 +00:00
jdolecek
07312f0fbb
Convert over to use the new MCA DMA facilities, which encapsulate
...
the MCA DMA controller access. This also means we gain >16MB RAM support.
While here, overhaul the driver to saner state, especially:
* simplify and clean the attach code a lot, and support the 'drive'
locator
* pass proper dev_t to readdisklabel() - formerly, the passed value was
completely broken (used incorrect major and wrong minor), but worked
by accident
* worker thread is now spawned per controller, rather than per-drive;
i/o cannot be done concurrently by different drivers, only one
i/o can be pending at any time
* simplify the command queue code, just sleep appropriately when
!poll case, g/c 'async' code formerly needed, move the bio code
from ed_mca.c to edc_mca.c:edc_bio()
* put all string arrays used by edc_dump_status_block() within #ifdef EDC_DEBUG,
and use numbers instead if it's not defined; this cuts object size by 5KB
* other misc cleanups
2001-11-23 22:53:09 +00:00
jdolecek
90fac765da
add 'drive' locator to mca edc
2001-11-23 22:35:46 +00:00
enami
71651851a4
Match against EPSON GT-9700F.
2001-11-23 10:31:54 +00:00
enami
674f6e4d18
Regen.
2001-11-23 10:30:49 +00:00
enami
9930efdacf
Add product id of EPSON GT-9700F.
2001-11-23 10:29:30 +00:00
enami
fe972558c0
Use __func__ instead of __FUNCTION__.
2001-11-23 10:20:47 +00:00
augustss
cdc819cd8a
Improve xfer abort sequence.
...
Fix another bug in qTD chain allocation.
2001-11-23 01:16:27 +00:00
augustss
6d8419a6cc
Handle Zip quirks differently.
...
Ugh! This driver need major overhaul.
2001-11-23 01:15:28 +00:00
augustss
6f95b070ca
Update mass storage protocol numbers.
2001-11-23 01:14:45 +00:00
simonb
1b1e4bd3d1
Remove hardcoded values for HZ (under different names!) from mcclock.c
...
and clock_machdep.h, so that now HZ can be any supported frequency of
the mc146818a/ds1287a RTCs.
Tested at 256Hz and 2048Hz.
2001-11-23 01:04:11 +00:00
augustss
37c8189778
Correct a comment.
2001-11-22 21:59:33 +00:00
jdolecek
d5c1ba9ed2
add a comment clarifying the DMA support, g/c the commented
...
out isa_dmacascade() call
some minor intendation changes, while here
2001-11-22 20:25:58 +00:00
yamt
5bf4d5554b
use little-endian crc on multicast hash for admtek chips.
2001-11-22 05:03:04 +00:00
augustss
7467533f5a
Improve dump routine slightly.
2001-11-22 04:31:01 +00:00
augustss
6e3a855c27
Fix a bug in qTD chain allocation.
...
Fix a qTD leak.
Handle out of memory conditions better.
My USB 2.0 CD-RW now mounts nicely and I can access files.
Performance is still lacking (it's at about 2Mbyte/s).
2001-11-22 04:20:49 +00:00
augustss
b5e0d97bf7
Add some DIAGNOSTIC tests.
2001-11-22 00:57:14 +00:00
augustss
37f2beed3e
Close multiplxees BEFORE removing the event variable they are
...
using (an interrupt at the wrong point caused disaster).
2001-11-22 00:54:23 +00:00
wiz
1fd7eeefcd
"than" instead of "then".
2001-11-21 19:14:19 +00:00
wiz
1f1e26bd6d
Presence looks better with a 'c' instead of an 's'.
2001-11-21 19:01:31 +00:00
wiz
55e6492076
Explicitly write explicitly without a second e.
2001-11-21 17:33:26 +00:00
augustss
bc136d1c2e
Make it compile without debug.
2001-11-21 16:22:58 +00:00
augustss
9dae283057
Add another "feature".
2001-11-21 16:12:56 +00:00
augustss
b2dc7b3fd3
Follow a safer protocol when updating the QH.
...
The EHCI driver isn't really working properly, but now the SCSI driver
correctly identifies my CD-RW drive! :-)
2001-11-21 16:05:13 +00:00
augustss
2c4813fa9d
Use NULL not 0.
2001-11-21 15:48:37 +00:00
augustss
df1a49923c
Fix indentation and typos.
2001-11-21 15:37:41 +00:00
augustss
5539d5afe6
Implement (incorrect?) data toggle clear method.
...
Implement allocation of qTD chains.
2001-11-21 14:00:12 +00:00
augustss
6bba920516
Wrap dump routine prototypes in #ifdef USB_DEBUG
2001-11-21 13:44:47 +00:00
augustss
ca0b46691f
Mask correct interrupt after error interrupt.
2001-11-21 13:43:38 +00:00
augustss
02f41ec3e6
Mask the correct interrupt after a door bell interrupt.
2001-11-21 13:42:19 +00:00
augustss
0adc2bbba2
Implement bulk transfers.
2001-11-21 13:04:50 +00:00
augustss
2d72c2726c
Add some interrupt processing.
2001-11-21 12:28:23 +00:00
augustss
4d4da7e06a
Fix typo in comment.
2001-11-21 12:25:55 +00:00
enami
eca8404326
Don't use __func__ as variable. It prevents compilation.
...
Use __FUNCTION__ instead.
2001-11-21 09:08:38 +00:00
augustss
1029005107
Pay more attention to if the HC is being unplugged.
2001-11-21 08:18:39 +00:00
itojun
bf755aea42
make it compilable without OHCI_DEBUG
2001-11-21 05:52:50 +00:00
augustss
c907a8fbbd
Add missing }
2001-11-21 02:47:07 +00:00
augustss
4f7b354305
Set up control xfers.
...
Handle xfer timeouts.
Better debug messages.
2001-11-21 02:44:30 +00:00
augustss
28a6a57942
Use a task to perform the timeout abort so we have a process context when
...
sleeping.
2001-11-21 02:41:18 +00:00
augustss
5506bb0f06
Some more debug stuff.
2001-11-21 02:39:31 +00:00
augustss
2478d1b320
Cast some args to bitmask_snprintf().
2001-11-21 02:38:35 +00:00
augustss
b171d0908b
Create a special kernel thread to run the usb short lived tasks (instead
...
of using the device discovery threads).
2001-11-20 23:53:26 +00:00
augustss
9716a5f26d
Don't bother with interrupts when being disconnected.
2001-11-20 21:12:46 +00:00
augustss
a8de831b24
Support port indicator light.
2001-11-20 16:25:35 +00:00
augustss
2f560c9410
Sanity check max packet lengths.
2001-11-20 16:09:01 +00:00
augustss
7679101a11
Add a comment.
2001-11-20 16:08:37 +00:00
augustss
e5353fd3b5
Use longer reset for root hubs (as told in the spec).
2001-11-20 16:08:10 +00:00
lukem
0fa231134c
- replace "defopt" with "defparam" for options which must take a value,
...
as config(8) will warn for value-less defparam options
- minor whitespace/formatting cleanup
- consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 14:34:18 +00:00
augustss
8366f16a80
Don't wait for door bell interrupt when controller has been disconnected.
2001-11-20 14:28:44 +00:00
augustss
86e6ea35eb
Update for new speed handling.
2001-11-20 13:50:07 +00:00
augustss
a598bed92e
Simplify async list handling.
2001-11-20 13:49:23 +00:00
augustss
b38958f960
Use device speed in setup.
...
Simplify async list handling.
2001-11-20 13:49:07 +00:00
augustss
7e4459fe10
Keep track of device speed for USB 2.0.
2001-11-20 13:48:03 +00:00
augustss
482dbdf4e3
More USB 2.0 definitions.
2001-11-20 13:46:09 +00:00
lukem
99bccc3cab
- pull in opt_kgdb.h where necessary
...
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup
2001-11-20 08:43:19 +00:00
oster
d11d1bd6fe
Cleanup some whitespace that indent got wrong a long time ago.
2001-11-20 02:37:29 +00:00
tsutsui
859356d03b
Add a new quirk value PQUIRK_CAP_SYNC for SCSI1 devices which support
...
sync transfers, and set PERIPH_CAP_SYNC for them in scsi_probe_device().
As per discussion on tech-kern.
2001-11-19 22:50:00 +00:00
soren
eefc317219
Remove duplicate struct scsipi_start_stop.
2001-11-19 17:18:08 +00:00
soren
27e3d258cd
Floptical drive needs PQUIRK_NODOORLOCK as well.
2001-11-19 16:54:20 +00:00
imp
98576a36a5
regenerate for 1.147
2001-11-19 05:25:22 +00:00
imp
cd84d65811
Merge from FreeBSD:
...
o Add devices from OpenBSD
o Minor sorting problems in my sorting attempt.
o A few additional -1 vendors for better card pattern generation.
o Add Zoom Air_4000 (needs to be added to awi)
o Add Netgear FA411 info (needs to be added to ne, plus quirks/fixes
to base pccard stuff before it will work).
o Merges through FreeBSD 1.22
2001-11-19 05:24:26 +00:00
augustss
2db9b8d2c8
Start of pipe open routine.
2001-11-19 02:57:16 +00:00
augustss
dfbba4149c
Injecting events into a mux that is not open is not an error.
2001-11-19 00:37:22 +00:00
soren
ae27210d46
Insite Floptical drive needs PQUIRK_NOLUNS.
2001-11-19 00:22:47 +00:00
christos
56cffa29dc
Add Titan 200H (from Wojciech Puchar)
2001-11-18 20:20:25 +00:00
tsutsui
c8f45396b3
Fix formatting of scsi_quirk_patterns[] and wrap long lines.
2001-11-18 17:22:43 +00:00
augustss
99c9ca8ab5
ANSIfy driver.
2001-11-18 17:15:48 +00:00
augustss
bf5b461387
Don't use a static variable in the power hook. It doesn't work with more
...
than one device.
2001-11-18 16:59:08 +00:00
tsutsui
aca8e01877
- Use MI ADAPTER_REQ_SET_XFER_MODE callback
...
- Move values in sc_sync[] member to sc_tinfo[]
- Change some u_int8_t values to int
- Remove unused wide negotiation states
- Misc cleanup
2001-11-18 14:50:11 +00:00
tsutsui
689089f7a9
- Use MI ADAPTER_REQ_SET_XFER_MODE callback.
...
- Nuke some magic numbers.
2001-11-18 14:33:10 +00:00
tsutsui
acd87a7687
Misc cleanups:
...
- correct trm_clock_period[] value
- pass BUS_DMA_{READ,WRITE,STREAMING} to bus_dmamap_load() as appropriate
- make sure to call bus_dmamap_unload() even after request sense
- saved srb params on request sense do not seem to be used,
so remove them from struct trm_srb
- handle target status more properly in trm_srb_done() and no need
to handle error retry in lower driver layer
- fix some comments
XXX Maybe need more cleanup around TQING for MI SCSI callback..
2001-11-18 13:02:30 +00:00
mrg
dbcf46ce8a
match the linksys prism2 card.
2001-11-18 04:27:49 +00:00
mrg
9d4995d7d6
regen
2001-11-18 04:26:16 +00:00
mrg
fa216ca465
add entries to allow one to match:
...
The Linksys Group, Inc., Instant Wireless Network PC Card, ISL37300PRevA
2001-11-18 04:25:43 +00:00
someya
275c5352b7
add Trident 4DWAVE based (4DWAVE DX/NX,SiS 7018,ALi M5451) PCI audio driver
2001-11-18 03:16:02 +00:00
augustss
0f70418027
Add more fields to hardware structs.
...
Add memory allocation for various data structures.
2001-11-18 00:39:46 +00:00
tsutsui
11a1ddc5dd
- make sure to call bus_dmamap_unload() even after request sense
...
- fix usage of scb flags
- misc cleanup
2001-11-17 21:26:12 +00:00
perry
4c7e639df1
fix a trivial lint warning
2001-11-17 05:31:27 +00:00
augustss
1f6462461a
Make it possible to report device speeds with ioctl(USB_DEVICEINFO).
2001-11-17 01:49:53 +00:00
augustss
25ffd2ae73
Regen.
2001-11-17 01:44:03 +00:00
augustss
c434bdf8c7
Yet another device.
2001-11-17 01:43:40 +00:00
thorpej
1466b9ca1d
Back out the last two changes I made to this driver -- some people
...
have reported lossage.
2001-11-17 00:56:04 +00:00
augustss
b2b2b2b448
Implement port reset sequence correctly.
2001-11-16 23:52:10 +00:00
christos
bdb84bd0cd
Regen
2001-11-16 18:34:08 +00:00
christos
d10a585999
add another USR modem.
2001-11-16 18:33:35 +00:00
augustss
b10f58ec3e
Add ehci.
2001-11-16 17:10:30 +00:00
augustss
f73c358f8c
Add some more data structure defs.
2001-11-16 15:33:13 +00:00
augustss
3b323cfaae
Better error message.
2001-11-16 02:21:54 +00:00
augustss
3db4a768d4
Handle devices that disappear during reset gracefully.
2001-11-16 01:57:47 +00:00
augustss
07ea2e28cb
Recognize port status changes.
...
Hand over low and full speed devices to companion controller.
2001-11-16 01:57:08 +00:00
augustss
122d2863d8
Add root hub emulation.
2001-11-15 23:25:09 +00:00
bouyer
1952efa437
Support Ultra/100 on CMD 0649.
2001-11-15 20:48:17 +00:00
augustss
b684cbc2a7
usbd_interface2device_handle() cannot fail.
2001-11-15 15:15:58 +00:00
lukem
2565646230
don't need <sys/types.h> when including <sys/param.h>
2001-11-15 09:47:59 +00:00
bouyer
0b74b95459
If the controller doesn't support UDMA, don't allow enabling UDMA via
...
config flags.
2001-11-14 20:18:11 +00:00
augustss
effc318eca
Regen.
2001-11-14 17:50:44 +00:00
augustss
77a68c4bf2
Add another printer dongle.
2001-11-14 17:50:21 +00:00
augustss
6a161b0a72
Add a DISGNOSTIC message.
2001-11-13 17:45:07 +00:00
lukem
071697f107
fix RCSID
2001-11-13 13:32:34 +00:00
lukem
a4bae8b066
add/cleanup RCSID
2001-11-13 13:14:31 +00:00
lukem
13ac430285
add RCSID
2001-11-13 13:01:57 +00:00
lukem
0e9163223a
cleanup RCSID
2001-11-13 13:01:22 +00:00
lukem
f61cbe7489
add RCSID
2001-11-13 12:51:12 +00:00
lukem
dca6ccc83f
add/cleanup RCSID
2001-11-13 12:49:45 +00:00
lukem
b84f53efc5
add RCSID
2001-11-13 12:47:33 +00:00
lukem
05b019ba0f
add RCSID
2001-11-13 12:24:11 +00:00
augustss
cec12bf775
Remove trailing `b' in some numbers for lengths. It just makes them look
...
like hex.
2001-11-13 08:01:40 +00:00
lukem
3f7d8d47b6
add RCSID
2001-11-13 08:01:09 +00:00
augustss
d6e38a1474
More test for NULL pipes.
2001-11-13 07:59:32 +00:00
augustss
9dcae667ee
Small changes to behaviour when disconnecting.
2001-11-13 07:57:22 +00:00
lukem
9d2580ff16
add RCSID
2001-11-13 07:56:39 +00:00
augustss
b93fa89e60
Fix pasto in a debug printf.
2001-11-13 07:56:04 +00:00
augustss
8b1e2b3b6d
Add some #endif comments.
2001-11-13 07:55:30 +00:00
lukem
4be2902b43
regen for RCSID
2001-11-13 07:54:18 +00:00
lukem
6f230ccce0
add RCSID to generated .c file
2001-11-13 07:52:41 +00:00
lukem
9048aaae21
add RCSID
2001-11-13 07:48:40 +00:00
lukem
8b7bb91219
add RCSID
2001-11-13 07:38:28 +00:00
lukem
57119f25e5
cleanup RCSID
2001-11-13 07:35:02 +00:00
lukem
045ae768cb
add RCSID
2001-11-13 07:30:37 +00:00
lukem
ab5d9d2b0c
add RCSIDs
2001-11-13 07:24:43 +00:00
lukem
9ab2c47148
cleanup RCSID (to be consistent with use in rest of kernel)
2001-11-13 07:23:15 +00:00
lukem
a3746e00b7
add RCSIDs
2001-11-13 07:11:12 +00:00
lukem
cb1dc621e6
add/cleanup RCSIDs
2001-11-13 07:00:23 +00:00
lukem
7ba10b3532
add RCSIDs
2001-11-13 06:54:32 +00:00
lukem
640249d1e9
add RCSIDs
2001-11-13 06:28:55 +00:00
lukem
6a3181d38f
add/cleanup RCSIDs
2001-11-13 06:26:09 +00:00
lukem
667807e40c
add RCSIDs
2001-11-13 06:24:53 +00:00
lukem
139747fb15
add/cleanup RCSIDs
2001-11-13 06:17:46 +00:00
lukem
b589588216
add RCSIDs
2001-11-13 06:08:32 +00:00
lukem
98bd235d29
remove superfluous NSEQUENCER > 0 test
2001-11-13 06:07:13 +00:00
lukem
2bbe2de647
add RCSIDs
2001-11-13 05:32:49 +00:00
enami
e5a47b8cfa
Include stdio.h when compiled in userland to pull in declaration of printf etc.
2001-11-13 03:12:44 +00:00
uwe
9380edd8ad
In fb_bell call kbd_docmd only #if NKBD > 0.
...
This allows kernels without kbd at zs to be linked.
(JavaStation-1 does not have zs, it uses pckbc instead)
2001-11-12 08:14:30 +00:00
atatat
e6de03653d
Don't set 'atapi_probe_device' if no atapi busses are being configured.
2001-11-11 23:21:18 +00:00
mhitch
c873b07b2d
After modifying transmit descriptors, write-back cache needs to be flushed.
...
Fixes DEFTA on R4x00 DECstations.
2001-11-11 18:47:03 +00:00
martin
cd67a5ce17
Add polish keyboard map, from Dawid Szyma_ski <dawszy@netbsd.lubin.pl>.
2001-11-11 11:48:56 +00:00
tsutsui
78b0b559e3
- Fix some bogus comments.
...
- Add a missed splx(s) in error case.
2001-11-11 05:28:55 +00:00
christos
09b14fa42a
Oops, missed one.
2001-11-11 00:34:52 +00:00
perry
82540eeaca
fix a couple of signed->unsigned warnings lint found
2001-11-11 00:25:23 +00:00
christos
ddf09edfc0
merge duplicate register definitions.
2001-11-11 00:24:16 +00:00
christos
257a5919a3
Get rid of duplicate RID definitions.
2001-11-11 00:16:07 +00:00
perry
7a702dcf66
trivially rename some macro parameters to avoid lint warnings.
2001-11-10 22:48:09 +00:00
augustss
48ea68d3d9
Make wsdisplay_set_console_kbd() a little less twisted.
2001-11-10 17:14:51 +00:00
augustss
9a444aef81
Get rid of unused abort_handle.
2001-11-10 17:11:38 +00:00
augustss
21f0709fbe
Abort any xfers on the control pipe before closing it on detach.
2001-11-10 17:10:42 +00:00
augustss
ff875692db
Improve dump routines.
2001-11-10 17:09:28 +00:00
augustss
3d3d59f852
Fill the companion controller array.
2001-11-10 17:07:21 +00:00
augustss
1b0216af5c
Add some register defines.
...
Print companion controllers.
2001-11-10 17:06:11 +00:00
augustss
3d963db4f2
Add some dump routines for debugging.
2001-11-10 16:54:56 +00:00
augustss
02186d8353
Small portability improvement.
2001-11-10 16:53:32 +00:00
thorpej
b1ec255377
Add a "firstbus" argument to pci_configure_bus(), indicating the
...
first bus number to use, rather than always assuming that we should
start at bus #0 .
2001-11-09 19:29:12 +00:00
thorpej
716af300ee
In query_bus(), use the parent pciconf_bus_t's PCI chipset tag,
...
not the new bus's (which is potentially uninitialized when some
calls are made).
2001-11-09 19:20:19 +00:00
augustss
495b9bd7d5
Fix a bug in xfer abort processing when the HC executes ahead of what
...
the driver aborts.
Don't block RHSC interrupts.
2001-11-09 15:01:57 +00:00
augustss
3dd8433864
Add a debug message.
2001-11-09 14:59:11 +00:00
augustss
1315ed7da5
Regen.
2001-11-09 05:49:53 +00:00
augustss
1018a07d67
Add a device (from OpenBSD).
2001-11-09 05:49:09 +00:00
christos
64a6ea2e08
Regen.
2001-11-08 17:05:58 +00:00
christos
c7a7458e1e
PR/14503: Cesar Crusius: Add Xircom XE2000.
2001-11-08 17:05:42 +00:00
haya
fd0fac251e
Regen w/ devlist2h.awk ver 1.4.
2001-11-08 09:08:41 +00:00
haya
ba93570e3c
Bugfix; to create compilable pcmciadevs_data.h. kern/11659
2001-11-08 09:02:17 +00:00
thorpej
4cd18f3872
Fix the Bridge Control Register bit definitions, add ones that
...
appeared in PCI 2.2.
2001-11-08 03:18:12 +00:00
thorpej
ea1dce5b44
Regen; correct i80312 description.
2001-11-07 21:13:26 +00:00
thorpej
4fd2586143
Correct i80312 description.
2001-11-07 21:12:49 +00:00
bjh21
479d71be35
Add support for feeding entropy to rnd(4).
2001-11-07 20:01:58 +00:00
thorpej
a3c15f8aaf
Regen; add Cyclone PCI-700 (IQ80310).
2001-11-07 18:55:29 +00:00
thorpej
bbc76f7954
Add product ID for the Cyclone PCI-700 (IQ80310).
2001-11-07 18:53:51 +00:00
augustss
a7fd78b8b5
Fix a bug in the DIAGNOSTIC version of the detach.
2001-11-07 14:13:35 +00:00
augustss
4cfba4290a
Ad a debug message. (With { } this time.)
2001-11-07 13:36:43 +00:00
enami
58a47f4ae2
Have necessary braces.
2001-11-07 12:57:33 +00:00
augustss
2158da33e3
Improve diagniostic message.
2001-11-07 03:26:06 +00:00
augustss
14e5f669c2
Improve some debug messages.
2001-11-07 02:55:04 +00:00
augustss
6e85b5b6c5
Add a workaround for broken ports (e.g. macppc) that do not call
...
cnpollc before cngetc in DDB. DDB now works with USB console on Macs.
Don't frob the LEDs if nothing changes.
2001-11-07 02:52:47 +00:00
augustss
a1ba73d6c3
Add a quirk for a USB CD/RW.
2001-11-06 13:31:20 +00:00
augustss
80c2d1c262
Regen.
2001-11-06 12:59:45 +00:00
augustss
0c8d23832b
Add DMI CD/RW drive (my first USB 2.0 device!).
2001-11-06 12:59:17 +00:00
augustss
4469f30685
Add some USB 2 related definitions.
2001-11-06 12:29:48 +00:00
augustss
cd86b27aad
ehci can attach to cardbus too.
2001-11-06 03:18:53 +00:00
augustss
58de8e2de6
Add ca_bus field.
2001-11-06 03:18:18 +00:00
augustss
7ae1e6394f
Add some data structures to keep enable finding companion controllers
...
for EHCI.
2001-11-06 03:17:36 +00:00
augustss
c342a3beab
Add some useful macros.
2001-11-06 03:16:17 +00:00
augustss
d8cebea1fc
Make some messages only appear with bootverbose.
...
Add bus number to attach args.
2001-11-06 03:11:10 +00:00
fvdl
7812d678d8
Initialize the cn_magic goo for kgdb (bah, that should really not
...
be necessary).
2001-11-05 21:39:24 +00:00
enami
480bb2c9a8
Fix typo in comment.
2001-11-05 08:22:24 +00:00
tsutsui
3b0f229027
Fix a couple of bugs:
...
- make sure to allocate memory for sc_tempsrb properly.
- correct links of SRB queue in trm_link_srb().
Now trm driver works on arc.
2001-11-04 17:17:22 +00:00
tsutsui
064be15283
Use common macro to check message length.
2001-11-04 12:03:41 +00:00
tsutsui
5e6dd3ae03
Add common macro to check message length.
2001-11-04 12:03:03 +00:00
itohy
c0f59fbbeb
AD1845 on my AlphaStation 255 doesn't match the AD1845 doc.
...
Try to detect AD1845 (unfortunately this is not always correct)
and work around the problems.
2001-11-04 08:08:25 +00:00
itohy
bd78bc67aa
Re-implement the mixer
...
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1 , #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 06:57:40 +00:00
itohy
ab43d67621
Introduce "flags 1", which causes left and right channels swapped.
2001-11-04 06:44:31 +00:00
wiz
a1264327ae
Sort alphabetically.
2001-11-03 22:39:25 +00:00
wiz
f56dfeb08b
add trm (MI)
2001-11-03 22:35:33 +00:00
tsutsui
d3701fc18a
Add a driver for the Tekram DC-395U/UW/F and DC-315/U SCSI host adapters,
...
which have the Tekram TRM-S1040 ASIC.
This driver is written by Rui-Xiang Guo <rxg@ms25.url.com.tw>,
and a number of cosmetic changes by me.
Tested on i386 by the author, and on macppc and sparc64 by me.
XXX On arc, kernel got panic in ltsleep() called from scsipi_execute_xs(),
XXX but I'm not sure what is wrong...
2001-11-03 17:01:16 +00:00
tsutsui
f82eb7bfa1
Replace a magic number with macro.
2001-11-03 15:52:03 +00:00
augustss
d1ff85c9aa
Improve debug messages a little.
2001-11-02 13:02:20 +00:00
itojun
9d7baa72da
recognize fxp on IBM thinkpad T23. from akimichi@wide.ad.jp
2001-11-02 03:40:47 +00:00
haya
2c903bf2c0
Add PCI power management control. If the power state of a bridge is
...
not D0 at device attaching or resuming, set the bridge D0 mode.
2001-11-02 03:32:33 +00:00
uch
6195437083
missing NBPFILTER > 0
2001-11-01 17:32:33 +00:00
augustss
41756e36f8
Regen.
2001-11-01 17:25:37 +00:00
augustss
16c1f136e5
Reorder two entries in numerical order.
2001-11-01 17:25:05 +00:00
augustss
492a03edae
Regen.
2001-11-01 11:06:45 +00:00
augustss
44345ed1ac
New device (from OpenBSD).
2001-11-01 11:06:18 +00:00
imp
fdf7743003
Add Intel PRO WLAN 2011.
2001-11-01 03:00:51 +00:00
augustss
246b858752
Inject events in the right place in the buffer.
2001-10-29 01:02:11 +00:00
augustss
46679564db
Add a DIAGNOSTIC test.
2001-10-28 17:16:58 +00:00
augustss
3deca4b069
Use the usb callout macros.
2001-10-28 16:53:21 +00:00
augustss
87746219bd
Put in some tests to see if the input source is NULL before using it.
...
Suggested by Havard Eidnes <he@netbsd.org>.
2001-10-28 10:30:22 +00:00
augustss
546b6e4434
Cosmetics.
2001-10-27 13:52:57 +00:00
ichiro
8f9f77356d
add entry ELSA XI-800 CF wavelan card
2001-10-27 08:16:17 +00:00
ichiro
3fc98e32f6
regen
2001-10-27 08:15:22 +00:00
ichiro
bfc10c9a50
add ELSA CF wavelan card
...
XI-800
2001-10-27 08:05:21 +00:00
augustss
14fc12f3b4
Cosmetics.
2001-10-27 00:39:29 +00:00
augustss
b609967aa7
Don't enable/disable kbds that belong to a display; they are always enabled.
2001-10-27 00:35:48 +00:00
augustss
48673c604a
Having a display does not preclude the mux from being open.
2001-10-27 00:34:57 +00:00
augustss
49c2ea7a87
Compare against coreect value to determine if we belong to a mux.
2001-10-26 20:48:47 +00:00
augustss
eadca0dfa3
Remove TODO list.
2001-10-26 20:45:05 +00:00
augustss
a5d3f7530d
Small rearrangement and more error checking.
2001-10-26 20:36:27 +00:00
augustss
6d55fe438e
Change a debug message.
2001-10-26 20:35:55 +00:00
augustss
17ba384efc
s/usbd_alloc_report_desc/usbd_read_report_desc/
2001-10-26 17:58:21 +00:00
augustss
dc901ef1f3
Compare pointer with NULL instead of using them as a condition.
2001-10-26 17:53:59 +00:00
augustss
53adfd4111
Add Via KT266 as an ATA100 controller.
2001-10-26 10:38:12 +00:00
mycroft
a79508e9d8
Regen.
2001-10-26 03:47:47 +00:00
mycroft
ff3d1952b4
Disambiguate Orbit symbols.
2001-10-26 03:47:31 +00:00
mycroft
4f05bf08da
Regen.
2001-10-26 03:29:02 +00:00
mycroft
0b572b9434
Add a different ID for the Kensington Orbit.
2001-10-26 03:28:03 +00:00
augustss
dddb1ab51d
Add some conditional compilation so we can have atapibus, but not scsibus.
2001-10-25 23:56:02 +00:00
augustss
e0ec4407e6
Better debug messages.
2001-10-25 22:43:24 +00:00
bouyer
b495351fbf
Commit changes I posted to tech-kern on Oct 14, which makes the ethernet part
...
of my Xircom RealPort Ethernet 10/100 + Modem (REM56G) work.
The modem part is still not usable (this would need some PCMCIA magic that
I don't know how to do; see my message to tech-kern on Oct 07).
Change to pcmcia_cis.c from OpenBSD.
I checked that this doesn't break a 3com 3C562D (ethernet+modem) which I
also have.
2001-10-25 20:20:24 +00:00
augustss
59121d58f5
Change back to have a wseventvar in the softc for event sources. This
...
way the effect of FIOASYNC survives close()/open(). Later versions
of XFree86 relies on this bug/feature.
Also add some more debug stuff.
2001-10-25 14:46:41 +00:00
augustss
437bf56d24
Fix pasto. From Andreas Johansson <ajo@rockstorm.se>.
2001-10-25 13:45:16 +00:00
augustss
8076bdb790
Regen.
2001-10-25 13:43:56 +00:00
augustss
c6f7926716
Add Logitech Cordless Desktop Optical.
2001-10-25 13:43:30 +00:00
shin
a9df6b6421
make this compile without WSDISPLAY_COMPAT_RAWKBD.
2001-10-25 13:19:41 +00:00
augustss
d148d21082
Regen.
2001-10-25 11:57:44 +00:00
augustss
bee35a9613
Add some VIA KT266 numbers.
2001-10-25 11:57:15 +00:00
augustss
12cafbf382
Regen.
2001-10-25 11:17:46 +00:00
augustss
78bed7c076
Remove Inc, Ltd, AB, Gmbh, etc. to be consistent (and save a few bytes).
2001-10-25 11:17:18 +00:00
augustss
bcab1556e8
Regen.
2001-10-25 11:04:36 +00:00
augustss
782a2cd1cc
Add Olympos C-700. (From FreeBSD)
2001-10-25 11:04:18 +00:00
haya
3aee8d644f
Prevent hang-up when a CardBus card is removed during the card is working.
2001-10-25 10:02:12 +00:00
augustss
ea0061b951
Change reset sequence to get status change bits set right on startup.
2001-10-25 02:08:13 +00:00
augustss
61406d282b
Force BIOS out of the game by setting the LEGSUP register to its default
...
value.
2001-10-25 01:46:26 +00:00
augustss
8c7d06c6f9
Add commented out match level feature.
2001-10-24 22:31:04 +00:00
augustss
3c51e46294
Regen.
2001-10-24 21:49:07 +00:00
augustss
5bd2b33be2
Add a PS/2 adapter.
2001-10-24 21:48:38 +00:00
augustss
1f93717101
Some more paranoia tests when entering the interrupt routine.
2001-10-24 21:04:04 +00:00
augustss
80d988187f
If we are the console and we have DDB then events must not be delivered
...
from the interrupt routine since this will enter the USB interrupt
processing recursively during polling.
Now ukbd can be used as console keyboard for DDB!
2001-10-24 21:02:18 +00:00
augustss
adca9c589f
More debug.
2001-10-24 20:20:03 +00:00
augustss
9e06709975
Clear wskbd_console_device when console keyboard is detached.
2001-10-24 15:44:50 +00:00
augustss
5c2ee5ebed
Make sure interrupt pipe is closed when detaching console keyboard.
2001-10-24 15:31:06 +00:00
augustss
97d4315865
Better debug message.
2001-10-24 15:30:17 +00:00
augustss
2f1f0a1702
Major rototilling of the wsmux code. No user visible changes (except that
...
many bugs have been fixed).
Changes:
The wskbd, wsmouse, and wsmux are now "sub-classes" of wsevsrc, which is
a source of ws events. This make the structure of those drivers a little
more uniform.
Many bug fixes involving adding and removing devices from muxes.
When a kernel is configured without wsmux there will now be none (unlike
before where you got a console mux anyway).
The kernel now compiles with all combinations of ws devices present.
2001-10-24 14:07:31 +00:00
augustss
1c11481abf
More null pointer checks in dump routine.
2001-10-24 00:42:05 +00:00
thorpej
9b17b651ee
Regen; Add product IDs for the Powerhouse Systems PowerPro and PowerTop
...
PowerPC system controllers.
2001-10-24 00:19:21 +00:00
thorpej
7bbddedbbd
Add product IDs for the Powerhouse Systems PowerPro and PowerTop
...
PowerPC system controllers.
2001-10-24 00:18:49 +00:00
thorpej
d9756b0f59
Regen; more Intel Gig-E fixup, and add Intel i82544 IDs.
2001-10-24 00:14:47 +00:00
thorpej
1d548d2778
More Intel Gig-E ID fixups, and add Intel i82544 Gig-E IDs.
2001-10-24 00:13:41 +00:00
mjacob
d0c3b71a47
tra-la, another QLogic f/w funny- this time with the 2300.
...
If we get a completion status of RQCS_QUEUE_FULL, it means
that the internal queues are full. Other QLogic boards set
the QFULL SCSI status. But *nooooooooooo*, not the 2300.
2001-10-23 23:21:00 +00:00
augustss
d9f173b146
Make it compile with debug on.
2001-10-23 17:58:15 +00:00
mjacob
8dd789d511
Comment out some redundant initializations to zero.
2001-10-23 16:24:33 +00:00
itohy
361bb97359
Support panpot on OPL3. Now this device is a stereo instrument.
2001-10-23 13:09:43 +00:00
jdolecek
7a27cbb4a3
De-__P()ify. Suggested by Lennart Augustsson.
2001-10-22 20:31:26 +00:00
mrg
3059c66d8f
fix a typo in the previous
2001-10-22 16:47:43 +00:00
bouyer
6721892796
Forgot to add __attribute__((__packed__)) to one hardware structure.
2001-10-22 16:45:28 +00:00
mrg
c4f3ffd5e7
increase the value of _HME_NDESC from 32 to 128. it reduces the noise the
...
driver makes due to various bad status conditions.
2001-10-22 16:45:20 +00:00
mrg
1578242c1a
use _KERNEL_OPT so this can be built as an LKM.
2001-10-22 16:43:55 +00:00
bouyer
da77194a02
We can't have XS_CTL_DATA_OUT and XS_CTL_DATA_IN at the same time.
...
Pointed out by Bernd Ernesti.
2001-10-22 16:16:00 +00:00
thorpej
2bc9b4e2be
Remove hack to skip OFW nodes which don't correspond to devices. These
...
are generally only at the toplevel of the OFW tree, and are best handled
by the code that configures the toplevel (which often needs special
handling anyway).
2001-10-22 14:36:55 +00:00
mjl
51a4b6098f
Add ST15150N to quirk table, as per PR/13817.
2001-10-21 23:25:04 +00:00
mjl
bea8701ec4
Add Corega PCC-TD, as per PR/14161
2001-10-21 23:18:50 +00:00
mjl
bd2ba73f5b
Regen
2001-10-21 23:17:37 +00:00
mjl
cb19665fbc
Add Corega PCC-TD, as per PR/14161
2001-10-21 23:16:48 +00:00
jmc
97deb18c10
Wrap ifdef's cleaner so wsmouse_[add|rem]_mux only get pulled in if NWSMUX > 0.
2001-10-21 23:04:57 +00:00
thorpej
d1e191d848
Reserve one descriptor at the end of the ring as a termination point,
...
to prevent the producer index from getting confused.
2001-10-21 20:45:15 +00:00
thorpej
5f6fd54ec7
Add a config flag (0x02) that can force DMA to be *disabled* on
...
chipsets for which it would otherwise be enabled by default.
2001-10-21 18:55:14 +00:00
thorpej
132fdb30e6
Make the various timing, etc. tables const, and add the __unused__
...
attribute to them, just in case something other than the pciide driver
proper needs to pull in the header.
2001-10-21 18:49:19 +00:00
mjacob
033f1aaf8d
Update to latest 12160 initiator firmware.
2001-10-20 21:52:24 +00:00
mjacob
5522109c39
Protect against deranged fabric nameservers that spit out 10000 identical
...
port numbers.
2001-10-20 18:37:54 +00:00
thorpej
8f0b837cd4
gem_init(): Don't call gem_mii_statchg() directly. Instead, call
...
gem_mediachange(). This will cause gem_mii_statchg() to be called
by the MII layer with the correct MII media state, so that speed
duplex parameters will be set properly.
2001-10-20 18:25:52 +00:00
mjl
a9ec452d57
Add Corega PCCB-11, as per PR/14298
2001-10-20 15:31:25 +00:00
mjl
8e7e3408b5
Regen.
2001-10-20 15:29:04 +00:00
mjl
259caf9257
Add Corega PCCB-11, as per PR/14298
2001-10-20 15:28:45 +00:00
billc
0b357f290a
FCS check and padding for minimum size Ethernet packet
2001-10-20 08:19:47 +00:00
nathanw
48bdb0d067
Match printers that report their interface as IEEE 1284 in addition to
...
bidirectional.
2001-10-19 15:30:25 +00:00
jdolecek
d9e921bd84
Fix obviously wrong printf() format in pci_intr_establish() failure case.
...
Pointed out by Chuck Silvers.
XXX This has compiled without a warning for me - what's up?
Add sc->sc_dev.dv_xname in another failure printf()
2001-10-18 19:15:38 +00:00
jdolecek
d520fe96ee
add emuxki
2001-10-18 17:45:15 +00:00
uch
a6952fe242
add device name used by playstation2 (gsfb, sbus, smap, spd)
2001-10-18 16:18:45 +00:00
wiz
7c90b959da
Fix check in device open.
...
Patch by KUROSAWA Takahiro in kern/14289.
2001-10-18 16:08:05 +00:00
thorpej
5d51f988c6
Yet more cruft removal.
2001-10-18 15:19:21 +00:00
thorpej
62577b1c53
Remove more cruft left over from copying bits of other drivers.
2001-10-18 15:09:15 +00:00
thorpej
dcd30fd216
Add a missing return statement in an error case, and g/c some
...
cruft that's not relevant in the PCI world.
2001-10-18 06:29:55 +00:00
thorpej
c616253896
Remove some more stuff left over from copying bits of the HME driver.
2001-10-18 06:28:17 +00:00
thorpej
d44a5ae87c
Remove some unneeded stuff from the gem_pci_softc.
2001-10-18 06:14:33 +00:00
thorpej
c559c94a45
Add goo to fetch the MAC address from OpenFirmware on the macppc
...
port. Copied from the macppc "gmac" driver, but otherwise untested.
2001-10-18 03:55:07 +00:00
thorpej
285d37822b
- The GEM registers are always memory type registers. Don't use a
...
broken hueristic to determine memory vs. i/o (one should never make
an assumption that the bus_space_tag_t is a pointer, as this code
did).
- Fix the "can't map registers" error message.
- Garbage-collect some code that is not relevant to the GEM (which
was already #if 0'd out).
- Cluster all the SPARC-specific code into one place (will be
replaced with Properties once that is fleshed out).
2001-10-18 03:48:48 +00:00
thorpej
bfda843574
Manipulate the Tx desc pointer as 2 32-bit values, just as
...
we do with the Rx desc pointer, both for consistency, and
for platforms which don't have bus_space_*_8().
2001-10-18 03:33:33 +00:00
thorpej
397a84f51a
Fix the semantics of __PCI_DEV_FUNCORDER so that they're actually useful:
...
If __PCI_DEV_FUNCORDER is defined, don't do the song-and-dance to check if
a device is multi-function; machdep code is going to tell us exactly which
functions to probe.
Note this required changing how pci_func_devorder() works in the
sparc64 PCI machdep code; now the "curnode" is assumed to point
to the bus, rather than some function (typically 0) on the device,
just as pci_bus_devorder() makes that assumption.
All this should allow the PCI code to actually locate the second
HME device on a Sun Netra t1, which is at 3,1 -- previously, the
PCI code would have missed it because there is no device at 3,0.
(Sun deserves a brick to the head for this one -- this seems clearly
out of line with the PCI spec.)
2001-10-17 22:16:41 +00:00
jdolecek
d4df209cbd
Add driver for Creative Labs SBLive! EMU10000, possibly also PCI512.
...
Written by Yannick Montulet (thanks!), with only couple minor touches by me.
2001-10-17 18:39:41 +00:00
ichiro
190ebf4d1f
regen
2001-10-17 15:44:50 +00:00
ichiro
b45d3009cf
add Dallas Semiconductor product
...
USB-FOB/iBUTTON
2001-10-17 15:44:22 +00:00
haya
5f75bfa4ba
Move some chip initialise code into pccbb_chipinit() function.
2001-10-17 10:25:51 +00:00
christos
070d583bb3
PR/14256: Kevin P. Neal: Add quirk for micropolis drive.
2001-10-16 13:33:02 +00:00
tron
b7ca23147b
Add UDMA/100 support for SiS chipsets 645, 650 and 730.
2001-10-16 08:22:50 +00:00
tron
5858458732
Regen.
2001-10-16 08:15:01 +00:00
tron
7c4f946401
Add host bridges of SiS 645, 650 and 730 chipsets.
2001-10-16 08:14:15 +00:00
tron
40dc031852
Add missing timings for Ultra DMA modes 3 to 5 on SiS hostadapters.
...
Problem pointed out by IWAMOTO Toshihiro on "tech-kern@netbsd.org".
2001-10-16 08:10:24 +00:00
minoura
1f7386b8aa
#include mulaw.h for converter functions prototypes.
2001-10-16 04:36:56 +00:00
augustss
3527006336
Don't use wsmux_getmux() if we NWSMUX == 0. Fixes PR kern/14252.
...
This is only a stop gap measure until the real wsmux changed get in.
2001-10-15 21:51:33 +00:00
veego
8d71019a14
Fix a pasto in the last revision.
2001-10-14 21:49:00 +00:00
bouyer
69fff4726e
Refuse to register a callback if the completion thread isn't started yet.
2001-10-14 21:17:41 +00:00
bouyer
ea29ee7d56
Call siop_morecbd() only when scsipi ask us ADAPTER_REQ_GROW_RESOURCES.
...
This prevent using bus_dmamem_map() from interrupt context.
Should fix kern/13827.
2001-10-14 20:37:28 +00:00
bouyer
a84535fd3e
Call ADAPTER_REQ_GROW_RESOURCES from the completion thread, if possible.
...
This allows HBA drivers to call bus_dmamem_map() safely.
2001-10-14 20:31:24 +00:00
christos
d9b3639de6
quirk for panasonic adapter.
2001-10-14 19:21:45 +00:00
bouyer
ce6aaa187a
Split channel flags in chan_flags used for communications between
...
scsipi and HBA, and chan_tflags used for communications between scsipi
and its kernel thread. No functionnal change.
2001-10-14 19:03:43 +00:00
christos
bc0ae7328a
Regen.
2001-10-14 18:09:42 +00:00
christos
19c27f0e0d
add another cdrom. The box says fujitsu, but the guts seem to be panasonic.
...
Mmm, inbreeding.
2001-10-14 18:09:22 +00:00
ichiro
9ad1f29f64
The description about soft-reset of WI_PCI_COR was added
...
and WI_PCI_SOFT_RESET was used.
Cosmetic change.
2001-10-14 12:33:18 +00:00
tron
1e022c27b4
Use UDMA/100 on SiS 735 chipset.
2001-10-14 11:21:10 +00:00
chs
5a41496a04
avoid overflow in timeout calculations.
2001-10-14 00:32:33 +00:00
augustss
5da06efad4
Allow for control devices (minor+128) to make it possible to manipulate
...
muxes that are in use.
Create muxes on demand.
2001-10-13 20:03:38 +00:00
augustss
ad74203973
Fix a pasto.
2001-10-13 19:58:35 +00:00
augustss
2efffa7ad7
Fix a (very old) pasto.
2001-10-13 19:56:09 +00:00
augustss
b079ab789b
ANSIfy.
2001-10-13 16:05:42 +00:00
augustss
04b1440239
Use memset(), not bzero().
2001-10-13 15:59:01 +00:00
augustss
82e5e6ab85
ANSIfy.
2001-10-13 15:56:15 +00:00
ichiro
cbcfff63ec
Add Intersil Prism2.5 Mini-PCI wavelan.
2001-10-13 15:00:23 +00:00
augustss
d701e45c14
Two changes to the wsmux code:
...
* Allow the wsmux used by wsdisplay for the keyboard(s) to be explicitely
specified with the kbdmux locator.
* Allow keyboards and mice that have a mux to be opened in the regular way.
These changes should be totally backwards compatible.
2001-10-13 13:35:59 +00:00
ichiro
c0e7956031
regen.
2001-10-13 07:44:21 +00:00
ichiro
8afd8ee7a9
add vendor & product ID
...
Intersil PRISM2.5 Mini-PCI WLAN
2001-10-13 07:43:42 +00:00
haya
727e8d4a04
Bugfix: re-order double buffer only when second buffer exists.
2001-10-12 09:27:23 +00:00
enami
de085459c1
Fix printf format.
2001-10-12 07:30:23 +00:00
tron
eea6d83f4b
Regen.
2001-10-11 14:31:58 +00:00
tron
fa5ea802e9
Add host bridge of the SiS 735 chipset.
2001-10-11 14:30:21 +00:00
augustss
9ba9477c1a
Regen.
2001-10-11 12:05:39 +00:00
augustss
9ec0bc09c1
Add Epson 1650.
2001-10-11 12:05:10 +00:00
ad
08632b145a
Back out previous - it causes panics.
2001-10-10 09:33:36 +00:00
mjacob
c0018ebdfe
The flow control registers are 16 bits wide, not 32.
2001-10-10 03:41:24 +00:00
augustss
a969ff5460
Add a reference counter to avoid blowing away the softc while frobbing
...
the MII registers.
2001-10-10 02:14:16 +00:00
imp
407046e784
Resync after the sort
2001-10-09 03:18:37 +00:00
imp
e23b40707e
Sort in a sane way. This file had become somewhat disordered over
...
time. Vendors are sorted by number. Vendors are grouped
alphabetically, with entries within a vendor's group arranged
numerically. CIS entries sorted alphabetically by identifier.
2001-10-09 03:17:22 +00:00
uch
db344ecd7b
fix PERSONA keymap. patch by KIYOHARA Takashi
2001-10-08 15:35:06 +00:00
augustss
adfbf61e48
Regen.
2001-10-08 03:38:24 +00:00
augustss
3d25ac0f24
Add some more Ethernet adapters (info gleaned from Linux).
2001-10-08 03:37:53 +00:00
augustss
4e23e486b8
Regen.
2001-10-07 22:31:02 +00:00
augustss
cafdfc900c
Add Epson 640U. From Chris Baird <cjb@brushtail.apana.org.au>
2001-10-07 22:30:33 +00:00
itohy
7903b5cda4
fix typo (two -> to)
2001-10-07 10:14:42 +00:00
mjacob
6349e2e63a
Fix various 2300 GB issues related to chip errata and documentation
...
misunderstandings. We also now can report our connection rate.
2001-10-06 20:34:49 +00:00
mjacob
daf0329c3c
Respect QLogic's errata- read BIU_ISR even on the 2300
...
to see if there's an interrupt (avoids PCI parity errors
which can occur on the 2312 if you access some registers
from the host at the same time the RISC on the 2312 is
accessing them).
2001-10-06 20:33:24 +00:00
pooka
ac8c8ee3fd
regen; iPAQ
2001-10-06 15:03:34 +00:00
pooka
c70a35c897
iPAQ PocketPC
2001-10-06 15:02:22 +00:00
thorpej
01b2f9b5c4
Remove and unnecessary cast, and avoid a memory leak in the event
...
allocation of the GATT fails.
2001-10-06 02:48:50 +00:00
oster
525f4a9bed
Backout a line that accidentally got included when the .h reorg went in.
2001-10-06 00:47:46 +00:00
thorpej
c2a1bef2f3
Create the Tx DMA maps with a size large enough for a jumbo Ethernet
...
frame.
2001-10-06 00:14:59 +00:00
eeh
7fbd726cc8
Stop wscons from conflicting with rcons.
2001-10-05 22:08:28 +00:00
thorpej
0d4d2293bb
Minor tidying up of the HME driver attach:
...
- Print nicer-looking message.
- Use bus_space_subregion() when appropriate, rather than arithmetic
on a bus_space_handle_t.
2001-10-05 17:49:43 +00:00
oster
035a63f6d3
More #if 0's bite the dust.
2001-10-05 15:41:23 +00:00
oster
9d1d665dac
Nuke some #if 0 stuff.
2001-10-05 15:33:12 +00:00
pooka
8d2fa0f7b6
add cast to u_long before cast to caddr_t make these compile on sparc64
2001-10-05 14:25:15 +00:00
thorpej
a5aff000fc
Match the UMAX Astra 3400.
2001-10-05 00:31:06 +00:00
thorpej
7853ec7367
Regen; add UMAX Astra 3400 scanner.
2001-10-05 00:24:52 +00:00