augustss
12560718c5
Files I forgot to remove in last commit.
2001-12-27 11:23:56 +00:00
augustss
996d5c6c26
Be a little more paranoid.
2001-12-26 10:56:58 +00:00
cjs
80c0f36acc
Re-make these after usbdevs update.
2001-12-26 07:18:36 +00:00
cjs
2d1b70cd08
Add ID for memory stick slot in Sony Clie running PalmOS 4.0. This may also
...
be the same for the PalmOS 3.5 versions, but I can't test that.
2001-12-26 04:32:39 +00:00
someya
09638d7a55
add 600 times dummy read from codec for YMF744 (revision < 2).
2001-12-25 16:55:50 +00:00
christos
70e238a1bc
PR/15049: Katsuomi Hamajima: fix memset re-definition.
2001-12-25 14:03:15 +00:00
jmcneill
ff0249d84d
Fix block position calculation in esl_intr.
2001-12-25 04:05:34 +00:00
jmcneill
b0df9e12af
The check for AUMODE_PLAY in esl_set_params was breaking some applications.
...
Remove it.
2001-12-25 03:47:46 +00:00
jmcneill
a89f9c462b
'nintr' from esl_softc was never used -- remove it
2001-12-25 03:46:34 +00:00
jmcneill
c4669fd0d0
Fixes output at 44kHz, 16-bit, stereo. Thanks to Charles Hannum and
...
Lennart Augustsson for providing proper fixes.
2001-12-25 02:37:39 +00:00
augustss
0228f218d3
Add UISDATA_DEBUG.
2001-12-24 21:37:52 +00:00
augustss
213baeaad6
Use the new USB_PRODUCT_ANY match.
2001-12-24 21:36:54 +00:00
augustss
bfc3660fb1
Add some more DIAGNOSTIC tests.
...
Make usb_match_device() match on USB_PRODUCT_ANY.
2001-12-24 21:36:15 +00:00
augustss
c33e730dd9
Get rid of the transfer_speed nonsense to calculate the timeout.
...
We get passed a timeout from the upper layer which is what matters.
2001-12-24 19:24:33 +00:00
augustss
ab7b323efa
Add a preliminary version of a driver for In-System Designs non-standard
...
ATA-over-BulkOnly protocol. The ISD chip can be found, e.g., in the
Archos MP3 player.
The driver still lacks real error handling.
2001-12-24 13:43:24 +00:00
augustss
45fc7e27e9
Regen.
2001-12-24 13:40:50 +00:00
augustss
0d60061a8b
Add some more In-System based adapters.
2001-12-24 13:40:31 +00:00
augustss
56b5867371
Make the separation between wire protocol (umass.c) and command protocol
...
(umass_scsipi.c) more distinct.
It is now possible to add new command protocols with a minimum of change.
The umassbus.[ch] files have been renamed umass_scsipi.[ch] since this
reflects their purpose better.
2001-12-24 13:25:52 +00:00
jdolecek
e71e5045dc
Back off rev. 1.21, this is going to be handled via userland keymap file.
...
Discussed with Martin Husemann.
2001-12-24 12:39:55 +00:00
christos
6e8072d607
enable the card before trying to establish an interrupt because we need the
...
ccr mapped on multi-function cards.
2001-12-24 12:07:27 +00:00
christos
d3d8a33acf
change if defined foo to ifdef foo and change a c++ comment into a c comment.
2001-12-24 09:41:34 +00:00
christos
d0b18148da
make sure that we adjust the end of the subrange if we adjusted the beginning
...
of it, but the offset of the card. Fixes 'cannot map i/o space' on 3c562d
2001-12-24 09:37:53 +00:00
christos
0e9f2d7a35
when we disable, we first disestablish the interrupt and then the card.
...
when we enable, we first configure the card and then establish the interrupt.
This is so that the ccr is mapped on multifunction cards.
2001-12-24 09:30:40 +00:00
jdolecek
a89c5fcfcb
Merge in changes sent by Michael Shalayeff, from OpenBSD port of this driver:
...
- use better default for DAC level (previous produced distorted output)
- preserve DAC setting in between openings
2001-12-23 23:14:59 +00:00
jdolecek
c4e01300ad
Add the AC97_HOST_SWAPPED_CHANNELS quirk for emuxki, and do some
...
whitespace cleanup. Streight from Yannick Montulet.
2001-12-23 22:54:08 +00:00
jdolecek
0a96b4c675
Whitespace cleanup, streight from Yannick Montulet.
2001-12-23 22:52:49 +00:00
ichiro
c4552cab7f
support FUJITSU MB86960/5 based ethernet cards
...
FMV-J181,182,182A
2001-12-23 09:25:19 +00:00
ichiro
766857df86
add FUJITSU MBH10302 specific Registers
2001-12-23 09:21:00 +00:00
ichiro
e5761e3205
regen
2001-12-23 09:11:05 +00:00
ichiro
42ff7db32c
change CIS name
2001-12-23 09:10:39 +00:00
gehenna
59c47ef767
The FujiFilm USB storage drive doesn't have a flex geom page and
...
doesn't know REQUEST SENSE.
2001-12-22 13:29:50 +00:00
gehenna
e1839209b8
Add new quirk: NO_REQUEST_SENSE
...
Submit by: Dave Sainty
2001-12-22 13:21:59 +00:00
elric
bfa5b70752
Hmmm. These were done this year, not 3 years ago.
2001-12-22 01:38:20 +00:00
augustss
3e919c40c7
Regen.
2001-12-21 23:37:41 +00:00
augustss
72d569430d
Fix typo, pointed out by Nathan Binkert.
2001-12-21 23:37:18 +00:00
matt
7ddce9880c
When mapping the consumer assignment, assign db_seg[0] to cb_seg[0] so any
...
private fields are copied as well. Then adjust cb_seq[0] public fields.
This make the DEFPA come up on sparc64.
2001-12-21 23:21:47 +00:00
bjh21
53fbe7ac5d
Correct a few comments and constant names in the light of the actual
...
documentation for this card (which I seem to have).
2001-12-21 22:33:28 +00:00
augustss
c6107a12f8
Add UIRDA_DEBUG.
2001-12-20 17:41:32 +00:00
augustss
4668f40616
Don't forget to call start routine in dongle manipulation.
2001-12-20 11:30:13 +00:00
augustss
28318702e6
Rearrange code that wiggles modem control lines so it actually reaches
...
the com port driver.
2001-12-20 09:26:35 +00:00
thorpej
16c96355a8
Fetch the MAC address from the NVRAM on the SiS 630 built-in Ethernet.
...
Based on PR 14665, Stephen Borrill <netbsd@precedence.co.uk>.
2001-12-20 03:32:31 +00:00
thorpej
f1b4fd111e
Regen; added SiS 630 PCI-Host bridge.
2001-12-20 03:24:58 +00:00
thorpej
694fcc51c0
Add the product ID for the SiS 630 PCI-Host bridge.
2001-12-20 03:24:22 +00:00
bouyer
5938b2bd62
Ops, a Ultra100>=TX2 is always in native mode !
2001-12-18 16:40:51 +00:00
bouyer
787b934e1e
The CMD0649 has 2 truly independant channel. tested by and patch from
...
Love <lha@stacken.kth.se>.
I suspect this is true for the 648 too; if someone with a 648 and one device
on each channel could test that all works with one_channel = 1, it would
be great !
2001-12-18 16:32:54 +00:00
soren
95c864d4f6
Previous was committed by mistake; revert.
2001-12-18 15:50:23 +00:00
augustss
b2a9a2993d
Move utility routine from uirda.c to usbdi_util.c.
2001-12-18 14:50:01 +00:00
ad
6b7cc2a465
Couple more tweaks, probably still not working.
2001-12-18 13:38:48 +00:00
ichiro
214499d236
change routine of device search.
...
mbe_pcmcia_lookup() is introduced
2001-12-18 11:32:47 +00:00
ichiro
62ddf45f47
regen
2001-12-18 11:23:49 +00:00
ichiro
e59b8e538e
add CIS strings of FUJITSU FMV-181,182,182A
...
delete ITCFJ182A, because FMV-182[A] ID is same as ITCFJ182A.
2001-12-18 11:23:24 +00:00
ichiro
57957526e0
Uoo
...
Make it compile.
2001-12-17 14:34:37 +00:00
ichiro
1b0449d255
support BREAK function,
...
keep a value of the last LCR.
2001-12-17 14:31:02 +00:00
ichiro
d5f3329501
In BREAK, the value of LCR is held.
2001-12-17 14:19:39 +00:00
gehenna
7cd101a6ca
Introduce the new umass quirk table.
...
Discussed with augustss.
2001-12-17 12:16:14 +00:00
bouyer
a9f41fe33b
dd support for the Promise Ultra100TX2, Promise Ultra100TX2v2 and Ultra133
...
IDE controllers. In part from OpenBSD via ragge, in part from FreeBSD.
2001-12-16 23:35:52 +00:00
oster
3b488c3f27
Fix an off-by-one error when autoconfig is hunting for a free RAID
...
device in the rare event that the one it wants is already in use.
Thanks to Wolfgang Stukenbrock for noticing the bug and filing the PR.
This fix addresses PR#14862.
2001-12-16 22:57:32 +00:00
thorpej
e53aabcecc
Rename weasel.c to weasel_isa.c in preparation for supporting the
...
PCI version of the Weasel.
2001-12-16 22:35:31 +00:00
thorpej
cf64f893c8
Try again: weasel -> weasel_isa
2001-12-16 22:33:35 +00:00
thorpej
87e8f0c761
Oops, revert previous; it included some other changes there weren't
...
meant to be checked in.
2001-12-16 22:32:07 +00:00
thorpej
b45e326520
weasel -> weasel_isa
2001-12-16 22:30:26 +00:00
thorpej
cb2d65aaf9
Fix a minor typo.
2001-12-16 22:23:01 +00:00
thorpej
23dfa29697
Add the serial port on the Middle Digital, Inc. PCI Weasel.
2001-12-16 22:22:04 +00:00
thorpej
fd8e4d1653
Regen:
...
Add Middle Digital, Inc. vendor ID. Add product IDs for the
Middle Digital PCI-Weasel Virtual VGA, Serial Port, and Control
registers.
2001-12-16 22:00:41 +00:00
thorpej
f7b4a308a9
Add Middle Digital, Inc. vendor ID. Add product IDs for the
...
Middle Digital PCI-Weasel Virtual VGA, Serial Port, and Control
registers.
2001-12-16 21:59:47 +00:00
soren
3faa83dcb4
To make dev/pcmcia work on platforms with 64-bit bus_addr_t and
...
32-bit bus_size_t (sparc), change the pcmcia_mem_map(9) offsetp
argument to bus_size_t as it is used as a bus_space offset.
2001-12-16 17:53:17 +00:00
ichiro
0a1465a39c
handle vendor and product lookup with common routine
2001-12-16 15:11:19 +00:00
ichiro
10c8cdf485
missing Misc Attribute of PCMCIA functions
...
FUJITSU CF Ether ITCFJ182A supported "Power down"
Power down supply current are 20mA
2001-12-16 06:07:50 +00:00
ichiro
ff638ce5fd
support FUJITSU CF EthernetCard
...
ITCFJ181A
mbe0 at pcmcia1 function 0: Fujitsu J182A Compact Flash Ethernet
mbe0: Ethernet address 00:00:0e:c5:01:ea
2001-12-16 05:44:33 +00:00
ichiro
a4ad95c757
regen
2001-12-16 05:43:16 +00:00
ichiro
dc739ee7b9
add FUJITSU CF EthernetCard
...
ITCFJ181A
2001-12-16 05:42:46 +00:00
tsutsui
7d563fd40e
malloc() + memset() -> malloc() with M_ZERO flag
2001-12-16 04:17:02 +00:00
bjh21
7f32875295
if_media support for the DP83905 AT/LANTIC (a souped-up DP8390).
2001-12-16 00:22:43 +00:00
bjh21
c72d5d40dd
Add code to support the bugged Macronix MX98905 chip, as used in several
...
podulebus Ethernet cards. This replaces the NE2000 memory-access routines
with ones that don't try to transfer more than 255 bytes at a time.
This code should perhaps be merged into ne2000.c, but presumably most NE2000
clones won't need it.
2001-12-15 17:47:34 +00:00
soren
875bff0962
To make dev/pcmcia work on platforms with 64-bit bus_addr_t and
...
32-bit bus_size_t (sparc), change the pcmcia_mem_map(9) offsetp
argument to bus_size_t as it is used as a bus_space offset.
2001-12-15 13:23:20 +00:00
soren
3514260fd4
Regen.
2001-12-15 13:18:10 +00:00
soren
c425f6ea72
Add Cologne Chip Designs ISDN controller.
2001-12-15 13:17:49 +00:00
soren
e324e87ca8
Fix typo in comment.
2001-12-15 12:01:55 +00:00
soren
3022b71f80
Correct copyright header.
2001-12-15 11:45:24 +00:00
soren
df984ecc52
Use bus_size_t's for bus space read/write offsets.
2001-12-15 11:41:09 +00:00
explorer
6b9f60a2db
install into /usr/include/dev/ir, since Jason made irdaattach look here.
2001-12-15 01:03:28 +00:00
augustss
c6df7d4358
Regen.
2001-12-15 00:31:43 +00:00
augustss
385b05e2f9
Add another Altima PHY. From Peter Seebach.
2001-12-15 00:31:03 +00:00
augustss
c70fc55cba
Add a hack for ScanLogic SL11R IDE adapter. From FreeBSD.
2001-12-15 00:26:14 +00:00
augustss
3a31906841
Regen.
2001-12-15 00:25:00 +00:00
augustss
4a4ae0b6b7
YAD.
2001-12-15 00:15:01 +00:00
augustss
18c6adb0b6
YAD (Yet Another Device)
2001-12-15 00:07:45 +00:00
augustss
f79701e3fa
Regen.
2001-12-14 23:57:00 +00:00
augustss
154a59571d
Add SS1001.
2001-12-14 23:56:42 +00:00
augustss
356c54687b
Integrate fix from PR 10155.
...
Add ACCTON SS1001.
2001-12-14 23:56:21 +00:00
nathanw
8d1585affa
The Olympus C-1 engine cameras seem to need the PQIRK_ONLYBIG quirk.
2001-12-14 22:15:52 +00:00
augustss
74a0c5db97
Remember to add header byte to length.
...
Use fewer magic constants.
(The driver works now.)
2001-12-14 15:44:04 +00:00
augustss
342a82f2dd
Start read at open.
...
Don't send new header when nothing changes.
(But uirda is still not working.)
2001-12-14 13:07:33 +00:00
augustss
7f50d17c46
Sanity check speed setting.
2001-12-14 12:57:30 +00:00
augustss
142cdc8997
Rearrage softc a little.
2001-12-14 12:56:58 +00:00
augustss
aa89e69702
Don't reallocate I/O buffers.
2001-12-14 12:08:14 +00:00
augustss
d787f49ee6
Fix descriptor definition bug.
...
Clear endpoint stall on error.
2001-12-14 12:02:53 +00:00
bjh21
2ee0431a3d
Register definitions for the NatSemi DP83905 AT/LANTIC, as used in many
...
podulebus Ethernet cards.
2001-12-14 10:16:03 +00:00
gehenna
f144837e0e
Stylistic changes
2001-12-14 08:58:49 +00:00
gehenna
2d27ad7c73
Define a new structure to store wire specific control methods.
...
The basic BBB/CBI functions are stored as members of constant structure.
When attached device, softc holds one of that constant structures.
2001-12-14 08:46:19 +00:00
ichiro
69424fd268
typo fix
2001-12-14 08:33:54 +00:00
gehenna
49bba69842
Use device handle and interface number which are stored in softc.
2001-12-14 06:21:56 +00:00
gehenna
53f34def69
Change style to store endpoint addresses and pipes.
2001-12-14 05:58:13 +00:00
mjacob
219d22404b
Major restructuring for swizzling to the request queue and unswizzling from
...
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it).
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
For NetBSD, it does a ddi_dmamap_sync as appropriate. This gets us out of
the explicit ddi_dmamap_sync on the whole response queue that we did for SBus
cards at each interrupt.
Set things up so that platforms that cannot have an SBus don't get a lot of
the SBus code checks (dead coded out).
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
Explicitly decode GetAllNext SNS Response back *as* a GetAllNext response.
Otherwise, we won't unswizzle it correctly.
Nuke some additional __P macros.
2001-12-14 00:13:44 +00:00
mjacob
acbfdd822a
Roll f/w to latest level, correcting several, ah, interesting bugs.
2001-12-14 00:07:55 +00:00
bouyer
71e063c830
pdc202xx_setup_channel: remove a duplicate line.
2001-12-13 20:57:22 +00:00
bouyer
ca9f8b13da
Regen: Add some promise controllers, from FreeBSD
2001-12-13 20:41:05 +00:00
bouyer
b981b05472
Add some promise controllers, from FreeBSD
2001-12-13 20:40:28 +00:00
augustss
04c10fc0cf
Initialize lock.
2001-12-13 17:25:37 +00:00
augustss
3df38cc501
Some debug stuff.
2001-12-13 17:15:09 +00:00
augustss
f2821a312a
Fix TODO comment.
2001-12-13 17:14:21 +00:00
augustss
090d1a628e
Move parameter checks to a common place.
2001-12-13 15:09:07 +00:00
augustss
2485171a67
Use unsigned ints.
2001-12-13 15:08:26 +00:00
junyoung
9dbc5fd199
ANSIfication & KNF fixes.
2001-12-13 08:38:35 +00:00
junyoung
f075aa60ac
ANSIfication & cosmetic changes.
2001-12-13 08:35:38 +00:00
junyoung
9ff2a7a76d
ANSIfy.
2001-12-13 08:34:55 +00:00
junyoung
d5decae4e0
ANSIfication & cosmetic changes.
2001-12-13 08:31:39 +00:00
tacha
cba701fed7
remove bogus printf.
2001-12-13 02:50:30 +00:00
augustss
0ba8bac8fe
Fix some bugs. But the driver is still borken.
2001-12-13 02:16:21 +00:00
augustss
d6bbabfb1b
Some DIAGNOSTIC nonsense.
2001-12-13 00:33:58 +00:00
augustss
a97820e536
Don't use u_int since it requires sys/types.h
2001-12-13 00:33:36 +00:00
augustss
8e98b4a185
Add some special cases for the Sitecom adapter.
...
Make endian safe.
Fix some minor bugs.
2001-12-12 23:59:48 +00:00
augustss
3ed67fc0c4
Add missing delay for the tekram dongle.
2001-12-12 17:52:06 +00:00
augustss
5c0685d35e
Don't use timeout 0 to tsleep() when the time is short.
2001-12-12 17:21:36 +00:00
augustss
0a4d7b9de3
Add a scanner quirk for keeping the pipes open between device opening.
...
Idea from Enami.
2001-12-12 15:48:18 +00:00
augustss
7727919172
Use USBD_NO_COPY in for some transfers where it was missing.
2001-12-12 15:44:47 +00:00
augustss
2fdd0f5a4b
Some more paranoia checks when DIAGNOSTIC.
2001-12-12 15:38:58 +00:00
augustss
29c3fe261b
Add some comments.
2001-12-12 15:38:27 +00:00
augustss
95d1208c14
Regen.
2001-12-12 15:37:21 +00:00
augustss
290d3a0d9e
Add some devices.
2001-12-12 15:36:59 +00:00
augustss
dfbcffae07
Remove some stupid casts.
2001-12-12 15:36:08 +00:00
augustss
2fe5c52a53
Use unsigned ints for device settings.
2001-12-12 15:34:49 +00:00
augustss
fae70125c0
Change default value for ebofs.
2001-12-12 15:34:15 +00:00
augustss
0680aa8809
Add some ioctl()s for consumer IR.
2001-12-12 15:33:53 +00:00
augustss
bb9f9be772
Add uirda.
2001-12-12 15:31:33 +00:00
augustss
4a802f4928
Add USB-IrDA bridge.
...
Needs more testing.
2001-12-12 15:27:24 +00:00
augustss
22735e5d44
Move usbd_clear_endpoint_toggle() prototype to usbdi.h.
2001-12-12 15:23:58 +00:00
gehenna
968318a989
Use vendor/product variables
2001-12-12 14:24:53 +00:00
gehenna
0f983137af
Don't change wire protocol state in umass generic function
2001-12-12 13:23:20 +00:00
gehenna
54e3c1962e
bcopy -> memcpy
2001-12-12 13:17:03 +00:00
elric
51b292ea65
Added support for the PowerStorm 4d20, initial support that is.
...
I plan on cleaning a few things up over the next few days, but this
appears to be working for me.
2001-12-12 07:50:05 +00:00
elric
94448f7e52
Update the ramdac interface to be allow the setting of dotclocks. This is
...
required to support the driver in ibm561.c.
2001-12-12 07:47:46 +00:00
elric
8ffabd82eb
Initial support for the IBM RGB561 RAMDAC. This uses the same interface
...
as the Bt463 and Bt485 drivers.
2001-12-12 07:46:48 +00:00
tv
8e6f7afb5b
MKfoo=no -> NOfoo
2001-12-12 01:48:43 +00:00
augustss
1ad59a57f2
Recognized Danube chip as well.
...
Small cleanup.
2001-12-11 21:34:06 +00:00
pk
f696afd8ff
Name changes: {KBD,MS}_BPS => {KBD,MS}_DEFAULT_BPS
2001-12-11 17:27:25 +00:00
ad
f1e83bd500
Regen.
2001-12-11 11:21:56 +00:00
ad
a2b8531ff3
Add some Intel/ICP-Vortex/Compaq products.
2001-12-11 11:21:01 +00:00
kleink
b327c956d1
Regen: add product ID for the Motorola MPC107.
2001-12-11 11:00:45 +00:00
kleink
4e24ace442
Add product ID for the Motorola MPC107.
2001-12-11 10:57:50 +00:00
kleink
0fc3ae7e76
Add (some) register definitions for the Motorola MPC105 PCI Bridge/Memory
...
Controller (PCIB/MC).
2001-12-10 12:09:33 +00:00
augustss
aa816a6d89
Regen.
2001-12-10 03:36:54 +00:00
augustss
9cfe511c73
Add some devices.
2001-12-10 03:36:12 +00:00
veego
9d39bbf3a8
Support for dvd region code (RPC).
2001-12-09 22:56:10 +00:00
manu
3cdc6f6197
Changed clocktl interface to use syscallargs structures
2001-12-09 16:10:43 +00:00
fvdl
14deefd5b1
pckbd_enable is called during autoconfig. Using pckbc_enqueue_cmd at
...
that time will have bad results, such as queue corruption because
of multiple TAILQ_INSERTs, etc, because it's not designed to work
in an interrupt/context-free environment. Use pckbc_poll_cmd instead.
2001-12-09 13:42:01 +00:00
pk
80c46be6c1
KBD_BPS => KBD_DEFAULT_BPS (sync with ms driver nomenclature).
2001-12-09 12:03:32 +00:00
pk
5962ca0a49
Allow SUN_MS_BPS to override the mouse baud rate at all times. (see PR14774).
2001-12-09 12:02:06 +00:00
gehenna
c9b557f40e
Add an item
2001-12-09 03:06:46 +00:00
cyber
d6671330e0
The prom doesn't setup the fb if its not set to console.
...
We shouldn't try to configure it in that case.
This will make serial console work. completes fix to PR#14213
(Private email determined PR author was using serial console.)
2001-12-08 19:42:45 +00:00
soren
a5812755ac
Pass sbus addresses to sbus_bus_map(), not sbus_bus_addr()'d ones.
2001-12-08 05:36:31 +00:00
matt
ee7afa77b2
Fix sense of if to grab address from alternation if srom is not in isv
...
format on Davicom chips. Add sparc specific case in this case to call
myetheraddr if oui is all 0s (for Netra X1).
2001-12-07 21:13:58 +00:00
fredette
178a439b58
Regen.
2001-12-07 14:21:18 +00:00
yamt
272f471ee0
add detach support for st.
2001-12-07 11:26:30 +00:00
onoe
e7357c0007
Regen: Add HPB and LPC functions of 82801BAM.
2001-12-07 08:00:35 +00:00
onoe
c971f89005
Add HPB and LPC functions of 82801BAM.
2001-12-07 07:59:24 +00:00
cjs
b445461d1e
Rebuild these to fix the "generated from" line.
2001-12-07 07:43:10 +00:00
cjs
9dd4ce03d0
Add Palm m500/m505 and Sony Clie USB cradle device IDs.
2001-12-07 06:59:44 +00:00
jdolecek
27b0006d34
it doesn't make sense to wait for resources during autoconfiguration
2001-12-06 21:04:27 +00:00
augustss
ba528e6dec
Small change to Christos' fix: allow malloc() to return NULL, but complain
...
if it does.
2001-12-06 20:00:58 +00:00
christos
94074f1212
change the malloc arg from NOWAIT to WAITOK; pointed out by lennard.
2001-12-06 19:54:02 +00:00
christos
dbabce6bb7
PR/14852: Martin Husemann: Allocate the slotdata the the probed slot before
...
we call the configuration function. Thanks lennard for pointing it out.
XXX: Someone should look this over and make sure that the current strategy
makes sense.
2001-12-06 19:52:56 +00:00
kleink
bc1f5761e3
Recognize the MK48T18 as well (differs from the MK48T08 only in packaging
...
options and voltages).
2001-12-06 18:54:23 +00:00
augustss
22fd9bbb5f
Add IrDA related defines.
2001-12-06 17:00:26 +00:00
rafal
a76d350acc
Fix component class/types to match reality for SGI's ARCS, which is just
...
different enough from stock ARC to be annoying.
2001-12-06 14:59:02 +00:00
rafal
23e1fa1306
Fix PR 13465 by Krister Walfridsson: memory initialization used uninitialized
...
variable to start off the write pattern (how ironic! 8-).
2001-12-06 13:18:22 +00:00
msaitoh
72f2d1c3a3
#endif ... -> #endif /* ... */
2001-12-06 10:28:40 +00:00
augustss
604ea366d4
Restructure to get rid of size limit.
...
Fix return value bug.
2001-12-06 00:17:12 +00:00
augustss
5ef96ebab2
Don't crash on early calls to get the speeds.
2001-12-06 00:11:18 +00:00
augustss
ec901ec7fe
Regen.
2001-12-05 23:25:56 +00:00
augustss
12812553f8
Add a NEC USB 2.0 hub. (USB 2.0 hubs are very rare creatures at the moment!)
2001-12-05 23:25:31 +00:00
bouyer
3fe7074804
Compile with NWD == 0. Fixe kern/14844 by hamajima@nagoya.ydc.co.jp.
2001-12-05 20:43:00 +00:00
augustss
b24bbb4d82
Constify a little.
2001-12-05 20:00:15 +00:00
augustss
47fffba901
Add dongle specific code.
2001-12-05 19:59:54 +00:00
fredette
1a3eaeafd8
Now generate oosiop.out, the compiled 53c700 script.
2001-12-05 18:34:19 +00:00
fredette
ba3be8d408
Generated from oosiop.ss rev. 1.1:
...
Initial compiled script for 53c700.
2001-12-05 18:32:55 +00:00
fredette
60c77bb2f1
Added support for the Symbios/NCR 53c700 SCSI controller.
...
This chip is very similar to the 53c710, except that it's
missing a few registers, doesn't do relative jumps and
doesn't have the table-indirect addressing mode.
I have checked that this still generates the same output
on the existing scripts for the other chips.
2001-12-05 18:31:53 +00:00
fredette
8dce160cd1
New script for the Symbios/NCR 53c700 SCSI controller.
...
This is closely related to osiop.ss, the script for the
53c710.
2001-12-05 18:27:13 +00:00
augustss
bd8b498c42
Do SIR framing on incoming frames.
2001-12-05 15:51:11 +00:00
augustss
8c2cf4c7d8
Break out SIR framing to its own file.
2001-12-05 14:50:13 +00:00
wiz
31fcd50433
Use defparam instead of defflags for some bktr(4) related options that need
...
a value. Add BKTR_REVERSE_MUTE to defflags.
2001-12-05 11:41:16 +00:00
simonb
20a3ef2b53
Remove some debug printf()s.
2001-12-05 10:54:51 +00:00
augustss
9c8fe0b8c5
Put bytes on right q.
2001-12-05 04:31:02 +00:00
augustss
0913a897a5
Set error code for IRDA_RESET_PARAMS.
2001-12-05 04:30:24 +00:00
augustss
af5eb6fc8c
Fix some minor bug.
...
Add more debugging.
2001-12-05 04:07:06 +00:00
augustss
b81ddff1a7
Reset parameters on open.
2001-12-05 04:06:32 +00:00
simonb
a9f73b2015
s/defopt/defparam/ in previous; from lukem.
2001-12-05 03:50:09 +00:00
simonb
8a32c6fbfa
Change PCI_NETBSD_ENABLE_IDE back to a defopt - it's a mask.
2001-12-05 03:24:57 +00:00
augustss
037eb62a0f
Mention that much of the code was stolen from Tommy Bohlin.
2001-12-05 01:13:58 +00:00
augustss
3ead5262dd
Add some dongle support ioctl()s.
2001-12-04 23:33:33 +00:00
augustss
527fff66c0
Change speed setting a little.
2001-12-04 21:50:50 +00:00
augustss
e0b032d651
Add ir/ to SUBDIR.
2001-12-04 21:43:44 +00:00
augustss
64a9c02472
Implement speed setting.
2001-12-04 20:53:21 +00:00
jdolecek
a275d0a6b9
clarify copyright - this is all freshly written, no older code used
2001-12-04 20:51:23 +00:00
jdolecek
7a12ca98ab
Make this NCR 53C90 driver work, using the chip information from
...
Tymm Twillman's Linux mca_53c9x driver.
Tested with external ZIP100 only.
2001-12-04 20:47:58 +00:00
sommerfeld
ceb358f80c
Fix so these files build with options DEBUG enabled.
...
The change to edc_mca.c may not work as I don't have any mca hardware.
2001-12-04 20:00:15 +00:00
augustss
636b7788a1
Implement input processing (untested).
2001-12-04 19:56:43 +00:00
augustss
1db6a7d9df
Simplify interface to irframe.
2001-12-04 19:56:17 +00:00
christos
4950567ffc
Regen.
2001-12-04 18:46:51 +00:00
christos
9925bfcf9f
PR/13711: Peter Seebach: Symbol's Spectrum24 pcmcia/prism2 card isn't probed.
2001-12-04 18:46:30 +00:00
bjh21
5aee55caae
New file, describing what little I know of the layout of the Oak SCSI card.
2001-12-04 18:40:14 +00:00
wiz
b4371d47f5
Replace some misuses of "then" with "than".
2001-12-04 17:56:30 +00:00
gmcgarry
6dbb6e893b
Simply entries added in previous.
2001-12-04 04:30:22 +00:00
augustss
5f99a98472
Add irframetty driver for IrDA frames over serial lines.
...
THIS MOST DEFINITELY DOES NOT WORK. IT'S VERY INCOMPLETE.
2001-12-03 23:32:32 +00:00
jdolecek
08733c9d51
add NCR_VARIANT_NCR53C90_86C01 "NCR53C90 (86C01)"
...
treat exactly like NCR_VARIANT_ESP100
2001-12-03 23:27:31 +00:00
enami
5eb74d8bbe
Use correct format letter for chp->channel.
2001-12-03 11:07:34 +00:00
augustss
02aa2a59bc
Handle vendor/product lookup with a common routine.
2001-12-03 01:47:12 +00:00
bouyer
bfc80822c7
Update my copyrigth.
2001-12-03 00:20:22 +00:00
bouyer
4ca5497111
Allow wd to attach to something else than wdc/pciide (like USB<->ATA bridges):
...
- move some functions from ata.c to ata_wdc.c or wdc.c.
- add callbacks to struct ata_bustype so that wd.c doesn't call directly
functions from the lower level driver.
2001-12-03 00:11:15 +00:00
augustss
23d4159897
Add a subroutine to search for a vendor/product pair.
2001-12-02 23:25:25 +00:00
bouyer
65768c08e2
No need to include atavar.h here.
2001-12-02 22:59:40 +00:00
bouyer
4809ad42cb
Clean up attach of wd/atapibus:
...
kill ata_atapi_attach. Change atapibus to use a struct scsipi_channel instead
of ata_atapi_attach as attach arch. Create a ata_device, compatible with
scsipi_channel, to attach wd.
2001-12-02 22:44:32 +00:00
augustss
194762be5b
Touch up a little. No functional change.
2001-12-02 20:29:55 +00:00
augustss
1187860bcf
GC unused stuff.
2001-12-02 20:06:00 +00:00
jdolecek
f803294ead
use the new MCABUS_DMA_16BIT flag to use 16bit DMA (not implicit anymore)
2001-12-02 17:04:41 +00:00
augustss
2a22b00459
Add some IrDA names.
2001-12-02 16:32:04 +00:00
augustss
766e28edd3
Add driver for the Toshiba's Oboe IrDA chip. From Jan Sparud.
2001-12-02 16:30:30 +00:00
augustss
cf8a8cbe20
Fixes from Jan Sparud's code:
...
Make read and write methods symmetrical, add poll method.
2001-12-02 16:29:25 +00:00
bjh21
1208c816b3
Add (#ifdef'ed out) code to support the PDMA hardware on the Oak SCSI card.
...
Unfortunately, this code seems not to work at present. I don't yet know why.
2001-12-02 14:49:32 +00:00
bjh21
4e3bf132c0
Add comments naming our private-use characters (in lower case, to make them
...
distinct from real Unicode characters).
2001-12-02 12:46:32 +00:00
augustss
b540959734
Add framework for Ir devices. The irframe device is for delivering IrDA
...
frame to user land and the cir device is for consumer Ir (remote controls).
This code is only partially finished, but the irframe device works (given
a low level driver for the actual IrDA device).
2001-12-02 10:44:43 +00:00
gmcgarry
adb908503d
Add identifiers for HP devices.
2001-12-02 01:17:51 +00:00
ross
43fe22fed0
Revert previous; the _e003U definition is used elsewhere.
2001-12-02 01:04:26 +00:00
bjh21
15d94a4c59
On a VT100, the "scanline 5" character is also used for box drawing, so
...
represent it as U+2500 (BOX DRAWINGS LIGHT HORIZONTAL). This makes NetHack
DECgraphics mode work properly on a wscons console using an IBM-encoded font.
2001-12-01 16:07:58 +00:00
jdolecek
c65c74ab28
regenerate (allocate identifier for NCR 53c90)
2001-12-01 10:44:35 +00:00
jdolecek
8272a293b7
allocate identifier for NCR 53C90
2001-12-01 10:43:36 +00:00
jdolecek
4b334401ca
Nonworking NCR 53c90 attachment. I don't get any interrupts from
...
the device yet, need to find real NCR53c90 docs to figure out what's wrong.
2001-12-01 10:42:38 +00:00
enami
e69c410de5
Shorten wmesg so that they can be distinguished in ps/top output.
2001-12-01 09:42:39 +00:00
enami
b56cddb826
Fix null pointer dereference when EHCI_DEBUG is defined (and
...
debug is enabled).
2001-12-01 09:39:32 +00:00
bouyer
c6c2c476eb
Hum, no need to print a message each time we're waiting for the drive.
2001-12-01 00:05:04 +00:00
bouyer
e6922f82d6
Various quirks for the ATAPI OnStream DI-30, mostly from the FreeBSD driver.
...
Many thanks to Chris Pinnock for giving me remote access to his hardware.
2001-12-01 00:03:45 +00:00
bouyer
cd8d64fe2b
For ATAPI tape drives, poll for DSC (using a callout), to get the real
...
status of the command, and make sure the drive is ready for the next one.
2001-12-01 00:00:29 +00:00
augustss
2781ac8e07
Regen.
2001-11-30 13:41:17 +00:00
augustss
a287e24799
Add new devices. From URA Hiroshi in PR 14790.
2001-11-30 13:41:00 +00:00
thorpej
33bfd7be53
Fix typo in copyright notice.
2001-11-29 17:15:44 +00:00
wiz
e0492a661d
Update note about ioctl tsleep error with error report.
2001-11-29 15:01:19 +00:00
augustss
4b06fc39aa
Regen.
2001-11-29 13:58:41 +00:00
augustss
7a7025366e
Add some ISD devices.
2001-11-29 13:58:22 +00:00
augustss
c01e71bac5
Plug a memory leak in an error case.
2001-11-29 11:07:12 +00:00
thorpej
636e9cd08b
Add a "cacheline_size" argument to pci_configure_bus(). It is used
...
to set the cacheline size in the BHLC register. This should be the
size of the largest D-cache line on a system.
2001-11-28 23:48:34 +00:00
christos
c563f940be
ELINK_W4_UBYTESOK is 0x0d. This is probably why kim is getting x2 numbers
...
in stats.
2001-11-28 23:46:42 +00:00
jdolecek
8528a3409b
Match also product id 0x627c, it was omitted by mistake.
...
Problem pointed out by Carl Drougge on tech-kern, thanks!
2001-11-28 20:56:47 +00:00
lukem
ecb81c3f6d
- convert usage of "defopt" to "defflag" where the relevant option does
...
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups
2001-11-28 10:21:10 +00:00
lukem
71376e0797
use #ifdef MEMORY_DISK_DYNAMIC (for consistency with the rest of the kernel)
2001-11-28 05:55:34 +00:00
lukem
9f42ccc795
use #ifdef DDB (for consistency with the rest of the kernel)
2001-11-28 05:45:27 +00:00
lukem
371fd3fc10
use #ifdef RAID_AUTOCONFIG (for consistency with the rest of the kernel)
2001-11-28 05:39:13 +00:00
fredette
4fd267f75d
Added the new defopt SCSI_OLD_NOINQUIRY; this is used instead
...
of sun2 to wrap code that conjures up INQUIRY responses for
certain specific old devices.
2001-11-28 01:04:49 +00:00
yamt
dc2a9f16a0
don't allocate a mbuf cluster if we don't need.
2001-11-27 21:40:55 +00:00
fredette
73001afb44
When opening the mouse port, be sure to open it for 8 data bits.
...
The sun2 PROM can leave the port configured for 7.
2001-11-27 16:19:43 +00:00
onoe
afdb23ddea
Set ONES (must be ones) bits in tmd1 of tx descriptors.
...
This fix avoids VMware 3.0/WinXP to crash.
2001-11-27 13:49:03 +00:00
yamt
b2dc60987f
add isapnp frontend for cs driver.
2001-11-27 12:23:31 +00:00
yamt
e9dd0249c8
regen for IBM EtherJet ISA.
2001-11-27 12:21:49 +00:00
yamt
dcb7807cbe
add IBM EtherJet ISA.
2001-11-27 12:20:39 +00:00
enami
60adc294b9
Regen.
2001-11-27 03:25:53 +00:00
enami
f349dc8748
cvs -q update -j1.147 -j1.148 pcmciadevs
2001-11-27 03:25:16 +00:00
fredette
f0002ba642
Added macros for the bits in the SYSBUS byte, and macros
...
for the i82596 PORT access interface, from the documentation
for that chip. These help clarify writes to the SYSBUS
part of the SCP, and PORT usage by i82596-aware drivers.
2001-11-26 23:30:59 +00:00
fredette
83c021b2a7
Added quirk entries for Adaptec and Emulex SCSI interposer boards.
...
Decode a limited set of SASI/SCSI-1 sense codes, and under sun2
only, conjure up INQUIRY responses for these boards.
2001-11-26 20:39:29 +00:00
augustss
380fd47edb
Change wchan name for usb task thread.
2001-11-26 20:16:55 +00:00
fredette
ec3eeda2fe
Use bus_space on sun2.
...
Update the comment to match list of bus_space-using ports.
Removed some old unused asm() labels.
2001-11-26 20:15:48 +00:00
yamt
adbdd3e6f6
add $NetBSD$ and copyright notice and rcsid.
2001-11-26 19:55:38 +00:00
yamt
f6b0ec4cce
- regen for IBM SCSI PCMCIA.
2001-11-26 19:49:34 +00:00
yamt
64b2149540
add IBM SCSI PCMCIA.
2001-11-26 19:48:55 +00:00
yamt
dbaca00330
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic
...
and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 19:17:05 +00:00
yamt
9324423e84
remove "stg", that I accidentally commited.
...
thanks, Tsutsui-san.
2001-11-26 14:21:33 +00:00
yamt
b43f7a4791
add pcmcia frontend for cs driver.
2001-11-26 11:17:34 +00:00
yamt
7af704bf48
- add power management code.
...
- use ether_ioctl instead of its own code.
(make ifconfig down works properly.)
2001-11-26 11:14:50 +00:00
tron
e75321130b
Back out new "hme" driver because it causes a performance regression on
...
"netio" on an U5.
2001-11-26 10:39:29 +00:00
tron
7287466499
Bug fixes for VLAN handling supplied by Klaus Klein in private e-mail.
2001-11-26 06:51:12 +00:00
ichiro
a103dcf333
support BUFFALO CFtype WLAN card
...
wi0 at pcmcia1 function 0: BUFFALO, WLI-CF-S11G,
wi0: 802.11 address 00:07:40:0f:03:ea
wi0: using RF:PRISM2.5 MAC:ISL3873, Firmware: 1.3 variant 4
2001-11-26 04:34:56 +00:00
ichiro
1c1ddcc034
regen
2001-11-26 04:19:12 +00:00
ichiro
3dcc51c184
add device: BUFFALO AirStation CFtype WLAN Card
2001-11-26 04:18:26 +00:00
itojun
969cf96980
make it compile without INET
2001-11-26 02:41:20 +00:00
jonathan
879d358535
* Add entry for Dolphin Peripherals 4036 dual-serial card.
...
(Note: PCI ID conflicts with Dolphin Peripherals 4025; a 4025 may
attach two serial units, but I cannot find one to test).
2001-11-26 00:41:24 +00:00
tron
99756bfe86
Pull in Jason Wright's latest changes to the "hme" driver from OpenBSD.
...
This supports direct DMA from and into mbuf cluster, and VLAN
handling is done a bit differently.
2001-11-25 22:12:01 +00:00
augustss
a6ba091eef
Add a quirk for Olympus C-1. From FreeBSD (by iedowse)
2001-11-25 19:15:46 +00:00
augustss
596224e54f
Pay attention to the timeout value passed down by the scsipi layer.
2001-11-25 19:05:22 +00:00
augustss
6fcfa35836
Regen.
2001-11-25 17:17:42 +00:00
augustss
f070b78088
Add Olympus C-1.
2001-11-25 17:17:22 +00:00
yamt
ce170de115
- add (partial?) i/o mode support.
...
- add partial cs8920 support.
- add detach code.
- add a quirk for EtherJet PCMCIA with cardbus bridge.
(above "partial" means "engough to support EtherJet PCMCIA")
2001-11-24 20:18:55 +00:00
jdolecek
67238c609c
The header part of driver overhault:
...
* simplify and clean the attach code a lot, and support the 'drive'
locator
* pass proper dev_t to readdisklabel() - formerly, the passed value was
completely broken (used incorrect major and wrong minor), but worked
by accident
* worker thread is now spawned per controller, rather than per-drive;
i/o cannot be done concurrently by different drivers, only one
i/o can be pending at any time
* simplify the command queue code, just sleep appropriately when
!poll case, g/c 'async' code formerly needed, move the bio code
from ed_mca.c to edc_mca.c:edc_bio()
* other misc cleanups
2001-11-24 12:46:15 +00:00
jdolecek
211d58f020
don't need opt_mcaverbose.h here
...
print 'memory configured' instead of just 'configured' for memory expansion
cards
2001-11-24 12:33:14 +00:00
jdolecek
bb23eba3d8
MCA DMA hooked via bus_dma, so remove one
...
add entry regarding AHA-1640 (the driver needs testing)
2001-11-23 22:57:34 +00:00
jdolecek
07312f0fbb
Convert over to use the new MCA DMA facilities, which encapsulate
...
the MCA DMA controller access. This also means we gain >16MB RAM support.
While here, overhaul the driver to saner state, especially:
* simplify and clean the attach code a lot, and support the 'drive'
locator
* pass proper dev_t to readdisklabel() - formerly, the passed value was
completely broken (used incorrect major and wrong minor), but worked
by accident
* worker thread is now spawned per controller, rather than per-drive;
i/o cannot be done concurrently by different drivers, only one
i/o can be pending at any time
* simplify the command queue code, just sleep appropriately when
!poll case, g/c 'async' code formerly needed, move the bio code
from ed_mca.c to edc_mca.c:edc_bio()
* put all string arrays used by edc_dump_status_block() within #ifdef EDC_DEBUG,
and use numbers instead if it's not defined; this cuts object size by 5KB
* other misc cleanups
2001-11-23 22:53:09 +00:00
jdolecek
90fac765da
add 'drive' locator to mca edc
2001-11-23 22:35:46 +00:00
enami
71651851a4
Match against EPSON GT-9700F.
2001-11-23 10:31:54 +00:00
enami
674f6e4d18
Regen.
2001-11-23 10:30:49 +00:00
enami
9930efdacf
Add product id of EPSON GT-9700F.
2001-11-23 10:29:30 +00:00
enami
fe972558c0
Use __func__ instead of __FUNCTION__.
2001-11-23 10:20:47 +00:00
augustss
cdc819cd8a
Improve xfer abort sequence.
...
Fix another bug in qTD chain allocation.
2001-11-23 01:16:27 +00:00
augustss
6d8419a6cc
Handle Zip quirks differently.
...
Ugh! This driver need major overhaul.
2001-11-23 01:15:28 +00:00
augustss
6f95b070ca
Update mass storage protocol numbers.
2001-11-23 01:14:45 +00:00
simonb
1b1e4bd3d1
Remove hardcoded values for HZ (under different names!) from mcclock.c
...
and clock_machdep.h, so that now HZ can be any supported frequency of
the mc146818a/ds1287a RTCs.
Tested at 256Hz and 2048Hz.
2001-11-23 01:04:11 +00:00
augustss
37c8189778
Correct a comment.
2001-11-22 21:59:33 +00:00
jdolecek
d5c1ba9ed2
add a comment clarifying the DMA support, g/c the commented
...
out isa_dmacascade() call
some minor intendation changes, while here
2001-11-22 20:25:58 +00:00
yamt
5bf4d5554b
use little-endian crc on multicast hash for admtek chips.
2001-11-22 05:03:04 +00:00
augustss
7467533f5a
Improve dump routine slightly.
2001-11-22 04:31:01 +00:00
augustss
6e3a855c27
Fix a bug in qTD chain allocation.
...
Fix a qTD leak.
Handle out of memory conditions better.
My USB 2.0 CD-RW now mounts nicely and I can access files.
Performance is still lacking (it's at about 2Mbyte/s).
2001-11-22 04:20:49 +00:00
augustss
b5e0d97bf7
Add some DIAGNOSTIC tests.
2001-11-22 00:57:14 +00:00
augustss
37f2beed3e
Close multiplxees BEFORE removing the event variable they are
...
using (an interrupt at the wrong point caused disaster).
2001-11-22 00:54:23 +00:00
wiz
1fd7eeefcd
"than" instead of "then".
2001-11-21 19:14:19 +00:00
wiz
1f1e26bd6d
Presence looks better with a 'c' instead of an 's'.
2001-11-21 19:01:31 +00:00
wiz
55e6492076
Explicitly write explicitly without a second e.
2001-11-21 17:33:26 +00:00
augustss
bc136d1c2e
Make it compile without debug.
2001-11-21 16:22:58 +00:00
augustss
9dae283057
Add another "feature".
2001-11-21 16:12:56 +00:00
augustss
b2dc7b3fd3
Follow a safer protocol when updating the QH.
...
The EHCI driver isn't really working properly, but now the SCSI driver
correctly identifies my CD-RW drive! :-)
2001-11-21 16:05:13 +00:00
augustss
2c4813fa9d
Use NULL not 0.
2001-11-21 15:48:37 +00:00
augustss
df1a49923c
Fix indentation and typos.
2001-11-21 15:37:41 +00:00
augustss
5539d5afe6
Implement (incorrect?) data toggle clear method.
...
Implement allocation of qTD chains.
2001-11-21 14:00:12 +00:00
augustss
6bba920516
Wrap dump routine prototypes in #ifdef USB_DEBUG
2001-11-21 13:44:47 +00:00
augustss
ca0b46691f
Mask correct interrupt after error interrupt.
2001-11-21 13:43:38 +00:00
augustss
02f41ec3e6
Mask the correct interrupt after a door bell interrupt.
2001-11-21 13:42:19 +00:00
augustss
0adc2bbba2
Implement bulk transfers.
2001-11-21 13:04:50 +00:00
augustss
2d72c2726c
Add some interrupt processing.
2001-11-21 12:28:23 +00:00
augustss
4d4da7e06a
Fix typo in comment.
2001-11-21 12:25:55 +00:00
enami
eca8404326
Don't use __func__ as variable. It prevents compilation.
...
Use __FUNCTION__ instead.
2001-11-21 09:08:38 +00:00
augustss
1029005107
Pay more attention to if the HC is being unplugged.
2001-11-21 08:18:39 +00:00
itojun
bf755aea42
make it compilable without OHCI_DEBUG
2001-11-21 05:52:50 +00:00
augustss
c907a8fbbd
Add missing }
2001-11-21 02:47:07 +00:00
augustss
4f7b354305
Set up control xfers.
...
Handle xfer timeouts.
Better debug messages.
2001-11-21 02:44:30 +00:00
augustss
28a6a57942
Use a task to perform the timeout abort so we have a process context when
...
sleeping.
2001-11-21 02:41:18 +00:00
augustss
5506bb0f06
Some more debug stuff.
2001-11-21 02:39:31 +00:00
augustss
2478d1b320
Cast some args to bitmask_snprintf().
2001-11-21 02:38:35 +00:00
augustss
b171d0908b
Create a special kernel thread to run the usb short lived tasks (instead
...
of using the device discovery threads).
2001-11-20 23:53:26 +00:00
augustss
9716a5f26d
Don't bother with interrupts when being disconnected.
2001-11-20 21:12:46 +00:00
augustss
a8de831b24
Support port indicator light.
2001-11-20 16:25:35 +00:00
augustss
2f560c9410
Sanity check max packet lengths.
2001-11-20 16:09:01 +00:00
augustss
7679101a11
Add a comment.
2001-11-20 16:08:37 +00:00
augustss
e5353fd3b5
Use longer reset for root hubs (as told in the spec).
2001-11-20 16:08:10 +00:00
lukem
0fa231134c
- replace "defopt" with "defparam" for options which must take a value,
...
as config(8) will warn for value-less defparam options
- minor whitespace/formatting cleanup
- consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 14:34:18 +00:00
augustss
8366f16a80
Don't wait for door bell interrupt when controller has been disconnected.
2001-11-20 14:28:44 +00:00
augustss
86e6ea35eb
Update for new speed handling.
2001-11-20 13:50:07 +00:00
augustss
a598bed92e
Simplify async list handling.
2001-11-20 13:49:23 +00:00
augustss
b38958f960
Use device speed in setup.
...
Simplify async list handling.
2001-11-20 13:49:07 +00:00
augustss
7e4459fe10
Keep track of device speed for USB 2.0.
2001-11-20 13:48:03 +00:00
augustss
482dbdf4e3
More USB 2.0 definitions.
2001-11-20 13:46:09 +00:00
lukem
99bccc3cab
- pull in opt_kgdb.h where necessary
...
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup
2001-11-20 08:43:19 +00:00
oster
d11d1bd6fe
Cleanup some whitespace that indent got wrong a long time ago.
2001-11-20 02:37:29 +00:00
tsutsui
859356d03b
Add a new quirk value PQUIRK_CAP_SYNC for SCSI1 devices which support
...
sync transfers, and set PERIPH_CAP_SYNC for them in scsi_probe_device().
As per discussion on tech-kern.
2001-11-19 22:50:00 +00:00
soren
eefc317219
Remove duplicate struct scsipi_start_stop.
2001-11-19 17:18:08 +00:00
soren
27e3d258cd
Floptical drive needs PQUIRK_NODOORLOCK as well.
2001-11-19 16:54:20 +00:00