52faa3e2d7
Blitz port of the FreeBSD wi* driver for the Lucent WaveLan IEEE
...
PCMCIA wireless LAN.
Original driver written by Bill Paul <wpaul@ctr.columbia.edu>
1999-07-14 22:24:07 +00:00
313081da93
Add a few 802.11 cards
1999-07-14 22:13:27 +00:00
021319d9b3
Avoid crashing if we are forced to close() before teh open() completed
...
(can happen on disconnect, probably due do dubious logic in vdevgone()).
1999-07-14 19:12:07 +00:00
e859716a79
Unused in MI code.
1999-07-12 19:47:40 +00:00
cf917747a1
Add a driver for the ESS Technology Solo-1 PCI AudioDrive line of chips.
1999-07-12 15:13:30 +00:00
7d8abaa49e
Regen.
1999-07-12 15:04:41 +00:00
ecbc7c6afd
Change the ESS Solo-1 description string to match the data sheet.
1999-07-12 15:02:46 +00:00
0612a1ddef
Fix typo in a printf, from Soren S. Jorvan.
1999-07-12 13:49:38 +00:00
497378ce6d
Copied from ../../arch/vax/bi/uba_bi.c,v
1999-07-12 13:43:40 +00:00
af86c7da93
Copied from ../../arch/vax/bi/kdbreg.h,v
1999-07-12 13:43:24 +00:00
f5e891549d
Copied from ../../arch/vax/bi/kdb.c,v
1999-07-12 13:43:11 +00:00
fa113488d5
Copied from ../../arch/vax/bi/bivar.h,v
1999-07-12 13:42:55 +00:00
3b01a5972f
Copied from ../../arch/vax/bi/bireg.h,v
1999-07-12 13:42:42 +00:00
f6e8b1b918
Copied from ../../arch/vax/bi/bi.c,v
1999-07-12 13:42:24 +00:00
361422bc96
Apply some bulk transfer bug fixes from FreeBSD.
1999-07-12 05:22:50 +00:00
54b747eb16
In pcmcia_pars_cis_tuple(): in the PCMCIA_TPCE_FS_MEMSPACE_TABLE case
...
there is one more memspace in the table then the PCMCIA_TPCE_MS_COUNT
mask produces.
1999-07-11 00:34:37 +00:00
c95ed3d2e5
In pcmcia_print_cis(): When printing io and mem spaces don't append trailing
...
0s if length or hostaddr are zero, instead DTRT.
1999-07-11 00:26:29 +00:00
2422638ad5
Fix a buglet in the driver's DMA buffer list ipmlementation, causing the next-
...
in-list (wrong) descriptor structure of the buffer in question to be freed.
1999-07-10 16:46:19 +00:00
e5d15c0dc6
Add another CD to the quirk table.
1999-07-08 14:24:42 +00:00
324c76b3d9
Once upon a time, long long ago, there was a "fix" added to the
...
RAIDframe driver to stop it from eating too much kernel memory when
writing data. But that fix had a nasty side-affect of hurting write
performance (*much* more than I thought it would). These changes nuke
that "fix", and instead put in a more reasonable mechanism for limiting
the number of simultaneous IO's which can be happening for each RAID device.
The result is a noticeable improvement in write throughput. The End.
1999-07-08 00:45:23 +00:00
5f1ede624f
Make the kthread API a bit friendlier to loadable kernel modules.
1999-07-06 21:51:22 +00:00
7b3258b6a7
Make the kthread API a bit more friendly to loadable kernel modules.
1999-07-06 21:44:09 +00:00
7875415701
Add the detach and activate entry points to the cfattach struct.
1999-07-06 07:42:23 +00:00
319c42848d
Add some sanity checks.
1999-07-06 07:12:03 +00:00
c9d36d5b4c
add in (controlled by option) 2200 Expanded Lun F/W
1999-07-06 05:43:51 +00:00
8fc3744ddd
Upgrade 2100 F/W and add 2200 f/w.
1999-07-05 20:33:58 +00:00
f428cf36fa
Change to approved NASA/Ames copyright. Add Fabric support. Fix SCCLUN support.
...
Add code that tries to track LoopID shifting.
1999-07-05 20:31:35 +00:00
3bb408eb05
Change to approved NASA/Ames copyright. Add in Qlogic 2200 support.
1999-07-05 20:28:11 +00:00
636e8f4688
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 05:55:23 +00:00
111e8a47c4
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37).
...
This means that all SIIG PCI serial/parallel cards (described on their
web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 05:38:05 +00:00
f3a6841709
make it compile if WSDISPLAY_COMPAT_RAWKBD is defined, but NWSDISPLAY not,
...
reported by Kazushi Marukawa <jam@pobox.com>
1999-07-01 11:18:20 +00:00
118d2b1d4f
IPv6 kernel code, based on KAME/NetBSD 1.4, SNAP kit 19990628.
...
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
1999-07-01 08:12:45 +00:00
6d864c0914
add driver for the Bit3 PCI-VME adapter, without the DMA parts for now
1999-06-30 17:45:38 +00:00
3a845702d7
A reference to http://members.hyperlink.net.au/~chart/pci.htm in comments;
...
this new effort at collecting PCI data outside the PCI SIG replaces the
one that was referenced in here before.
No regeneration required.
1999-06-30 16:52:52 +00:00
83eb712e3c
update for new VME framework
1999-06-30 15:07:45 +00:00
44418fdf70
new, more mi, VME framework
1999-06-30 15:06:05 +00:00
b177c7a397
Totally redo the way device detach is done. It now uses a kernel event
...
thread and the config detach method.
Squish a number of space leaks on detach.
1999-06-30 06:44:22 +00:00
dd048d428b
Make it possible to detach wsmouse and wskbd.
...
XXX wskbd probably needs some more work.
1999-06-30 06:21:21 +00:00
622f3d3db5
Regen.
1999-06-28 04:10:26 +00:00
f69aea19d2
Add some weirdo modem.
1999-06-28 04:09:53 +00:00
dbd86a254c
add driver for realtek 8129/8139, from freebsd, with mii stuff kicked out
1999-06-27 15:19:40 +00:00
746543928c
regen
1999-06-27 15:15:00 +00:00
120b30daf4
add some realtek 8139 clones
1999-06-27 15:13:54 +00:00
a7e4d3ac4d
Add the Sbus front-end for the HME driver.
1999-06-27 12:47:52 +00:00
5041f2a9dd
HME ethernet driver.
...
Note: this is work in progress; needs testing and tweaking. mgr has
promised to do that..
1999-06-27 12:26:32 +00:00
b2c4582d6d
Regen.
1999-06-26 16:26:57 +00:00
0ddfad8dfa
"www.usb.org" says that:
...
a) Logitech has vendor ID 0x046d.
b) That vendor ID 0x05ac is Apple Computer.
1999-06-26 16:26:20 +00:00
6e72bbdb8a
Regen.
1999-06-26 15:21:17 +00:00
62f6e7122f
Correct description of vendor "LOGITECH": this is not Apple.
1999-06-26 15:20:53 +00:00
3fd5344a95
Add suspend/resume handling to the UHCI driver.
...
Currently it only works if the BIOS saves enough state of the controller.
Once I find a machine with a dumber BIOS I'll try to improve that.
1999-06-26 08:30:17 +00:00
701eca7576
Remove unneeded #include.
1999-06-26 03:14:25 +00:00
7ef0c8eef3
Add a quirk for mice with reversed Z-axis.
1999-06-26 00:09:15 +00:00
55fbc23acc
Regen.
1999-06-26 00:08:15 +00:00
c4c81ec6fa
Add another Logitech mouse.
1999-06-26 00:07:35 +00:00
59da37b37e
Go to splbio() when calling scsipi_free_xs(), just like the SCSI counterpart.
...
Fixes PR #7853 , Paul Dokas <dokas@cs.umn.edu>.
1999-06-25 18:58:54 +00:00
09a2fed6f9
- Show 1bpp for MX during configuration stage.
...
- Replace memory layout 'struct' with array/pointer access.
1999-06-25 03:33:20 +00:00
4f2e48c4d2
Don't turn on the engine too early.
...
Add and use QEDEBUG.
1999-06-24 19:59:14 +00:00
9335333dee
Issue a reset command when initializing.
1999-06-24 19:56:51 +00:00
8dd0e06ba1
- Hide memory mapped VDAC hardware register layouts using the array
...
element access instead of C bitfield (hello, BCPL).
- XXX Some TURBOchannel framebuffers might need shutdownhooks(). It
seems not necessarily hardware sprite cursor images are re-initialized
by DECstation PROMs upon exits from kernel.
- XXX It'd be an arguable point to allow user programs to change the
shade of gray freely for pixel value 0 and 1.
1999-06-24 03:51:14 +00:00
463e258cdb
- Allow to choose the 'color' of sprite cursor. Only red cmap makes sense.
...
- Drop TC Alpha support (OSF/1 and Digital UNIX never supports PMAG-AA).
1999-06-23 23:48:28 +00:00
4fd8325ec6
Resurect the old register read/write test for non-ATA/ATAPI drives, to avoid
...
false matches on controllers which properly respond to a WDCC_RECAL command.
Should close PR port-i386/7702 (the author tested this patch, and said it
solves his problem).
1999-06-23 19:00:17 +00:00
52d0d1398b
Regen after tyop.
1999-06-23 10:41:08 +00:00
1720673bc2
Corrected tyop.
1999-06-23 10:40:16 +00:00
2abd78cfd3
Regen.
1999-06-23 10:37:10 +00:00
e44e18cc01
Add manufacturer Lasat Communications A/S, product Lasat Credit 288 Modem.
1999-06-23 10:36:19 +00:00
b02dbae17e
In xxx_mediachange(), if there is no callback to the front-end, just
...
return 0 instead of EINVAL. In this case, there will only be one media
type, and the upper-level if_media code will ensure that the user is
setting to that type.
This matches changes Jason made a while back to sys/dev/ic/lance.c
1999-06-23 04:17:10 +00:00
839bcbbe9f
- Fix an error in the depth of PMAG-AA MX. This driver can take 72Hz
...
virtical video retrace interrupt and was verified ok on Nanao grayscale
monitor. XXX seems still confusion/mistake on Bt431 cursor image
manipulation.
1999-06-23 01:58:22 +00:00
37d80b004f
Remove dead file; alphabetize
1999-06-20 18:17:22 +00:00
97e1165dd2
add qe and qd.
1999-06-20 18:09:22 +00:00
df81191ccd
Remove dead file
1999-06-20 18:07:18 +00:00
e0199475d8
QDSS should now work as console.
...
XXX - still vax-specific.
1999-06-20 17:58:56 +00:00
5e906a9454
Fix a erroneous malloc.
1999-06-20 17:56:29 +00:00
2c9abc499a
Copied from ../../arch/vax/uba/qfont.c,v
1999-06-20 17:55:12 +00:00
9484404e28
Copied from ../../arch/vax/include/qevent.h,v
1999-06-20 17:54:51 +00:00
e49d4f4bd3
Copied from ../../arch/vax/include/qduser.h,v
1999-06-20 17:54:27 +00:00
09b92a09e3
Copied from ../../arch/vax/include/qdreg.h,v
1999-06-20 17:54:13 +00:00
08e6c30baa
Copied from ../../arch/vax/include/qdioctl.h,v
1999-06-20 17:53:53 +00:00
6f0df397d0
Copied from ../../arch/vax/uba/qd.c,v
1999-06-20 17:53:33 +00:00
b75d5b1fe6
Fix tyop.
1999-06-20 16:44:49 +00:00
50f084159c
SCTRL2 register number wrong. PR #7756 , Johan Danielsson.
1999-06-20 16:42:37 +00:00
4a0270a264
Intel i82557 driver is now split into bus and chip bits.
1999-06-20 16:35:40 +00:00
206460244e
Bus-independent back-end driver for Intel i82557 fast Ethernet chips.
1999-06-20 16:33:28 +00:00
3ccbec3742
Totally rewritten DEQNA device driver, that uses the bus.h interface
...
instead. This almost doubled the receive speed of the interface :-)
1999-06-20 00:04:47 +00:00
36da665f8c
Added NewMedia BusToaster, an Adaptec 152x compatible.
1999-06-19 18:50:28 +00:00
fb7137cfd9
Regen
1999-06-19 18:49:34 +00:00
4e0161f8dc
Regen
1999-06-19 18:17:14 +00:00
c32aeb153b
Added NewMedia BusToaster SCSI Host Adapter
1999-06-19 18:16:07 +00:00
d98b0bd725
Regen.
1999-06-19 04:51:42 +00:00
0650293580
Add Sony CXD 1947A FireWrire Controller and Neomagic 128XD.
1999-06-19 04:49:52 +00:00
a6a09bcdd6
Add support for ES18[67][89]. From PR #7427 by AW9K-NNK@asahi-net.or.jp,
...
Nonaka Kimihiro.
1999-06-18 20:25:23 +00:00
041cfb14aa
Fix that ANNOYING transmit timeout bug, caused by an unfortunate interaction
...
between a bug in the receive path (buffer length used instead of actual
received frame length) and the ARP code not correctly setting the length
of the reused mbuf, which all told caused the transmit logic in the chip
to wedge.
Also, make sure to count received packets.
Found and fixed by Zdenek Salvet <salvet@ics.muni.cz>, PR #7809 .
1999-06-18 17:44:06 +00:00
3adf25374a
The extraneous interrupt that seems to occur after a reconnect and a DMA transfer
...
starts running can occur on both DMA in and DMA out. I missed the little comment
in the Mach driver for the DMA out case. Also, only ignore the interrupt if the
TC is non-zero (to match the Mach driver).
1999-06-18 05:30:53 +00:00
12c2ab7750
Regen.
1999-06-18 04:55:27 +00:00
25b9bffe81
Add some Apple and MOT products.
1999-06-18 04:54:06 +00:00
12347b2657
Make uvm_vslock() return the error code from uvm_fault_wire(). All places
...
which use uvm_vslock() should now test the return value. If it's not
KERN_SUCCESS, wiring the pages failed, so the operation which is using
uvm_vslock() should error out.
XXX We currently just EFAULT a failed uvm_vslock(). We may want to do
more about translating error codes in the future.
1999-06-17 15:47:22 +00:00
92f90fcb92
STK 9490 && SD-3 drives incorrectly quirked as not supporting the LOAD command.
...
Anyway, just because a drive doesn't support the LOAD (to BOT) command does
not mean that the drive doesn't support the UNLOAD command. Also note and
print errors in rewinds and unloads (and errors in writing closing filemarks
for same).
1999-06-17 04:20:55 +00:00
b6429ec3c5
In scsipi_done(), call scsipi_free_xs() at splbio().
1999-06-16 07:35:31 +00:00
10b0c75443
- Don't even try to emulate WSATTR_HILIT on mono displays
...
- WSATTR_REVERSE is a capability of both mono/color
1999-06-15 22:34:45 +00:00
05a0ca4737
Fix stupid alignment bug. The 'slop' stuff is due for replacement with masks
...
RSN per the README.
1999-06-15 21:34:05 +00:00
475ed73e46
Get rid of a bunch of code that was part of an old USBDI proposal, but that
...
is unused in our USB stack.
Once upon a time, when I started writing the USB stack for NetBSD, there
was an effort to make a standard for how USB device drivers should interact
with the rest of the USB stack. This effort had contributors from just
about all Un*x camps (but not Micro$oft :). I based my design on one of their
early proposals since I thought it would be a good idea if we could all
share device drivers with a minimum effort. Shortly after I started my work
all the free Un*x people were thrown out of the USBDI work since we did not
pay the USB membership fee. Well, some time has passed now and the work of
the standardization group is almost public again. But alas, the new standard
has grown to be a monster! I do not want to have this as the basis for the
*BSD USB stack; it is far too complicated.
So, since we are not even close to being compilant with the standard, I've
thrown out some old baggage.
1999-06-14 17:09:57 +00:00
656245dc18
Check that the hub ports actually power up.
1999-06-14 16:59:47 +00:00
86abd11d42
Remember to pass down the proc pointer when adding a hot spare.
...
(Thanks to Martin J. Laubach for helping track this one down.)
1999-06-13 20:36:17 +00:00
cff0f6b1e4
Don't pre-load the identify message into the fifo just just before the command register
...
is written. This significantly reduces, if not eliminates, the problem reported in
PR#5510. It stops the problem on my 5000/200, and two other people have verified that
it fixes the problem on their 5000/200s. I'm waiting for confirmation from the PR
originator before closing the PR.
1999-06-13 17:21:29 +00:00
001471550c
Move chip version check from advlib.c to adv_isa.c
1999-06-12 12:10:30 +00:00
35e149ef50
Move chip version check from advlib.c to adv_pci.c
1999-06-12 12:09:58 +00:00
d0fb45fdf3
Clean up some stuff
...
Remove chip version check
Now compile again on 68k based systems
1999-06-12 12:09:01 +00:00
5b4a75d281
scsipi_free_xs() wants to be called at splbio; do it.
1999-06-12 11:19:00 +00:00
3fffa45b75
Guard global `rnd_mempool' against interrupts.
...
Use appropriate flags in pool_get().
1999-06-12 10:58:47 +00:00
9f43c5a1f2
If we're the console keyboard, automatically enable the keyboard.
...
Should fix part of console keyboard problems on macppc. The usb keyboard will
now work on boot! Doesn't fix problems with keyboard freaking out when
changing LED state.
Thanks to Mattias & Lennart & Tsubai for input on resolving this problem.
1999-06-11 19:05:13 +00:00
e3b1b88d76
- Errors in case analysis...
1999-06-11 01:44:47 +00:00
f4be9af151
- Rework copycols() with SFB ASIC calls.
1999-06-11 00:56:09 +00:00
c65a504ed5
Add more debug.
1999-06-10 15:48:27 +00:00
2959234be5
Fix a bug in bulk input. Discovered by Joel Chen <jchen@liberate.com>.
1999-06-09 22:57:16 +00:00
cd0a68c3f6
Fix use of & when % was appropriate.
1999-06-09 19:40:54 +00:00
27b9cd0724
Remove a redundant test.
1999-06-09 17:04:45 +00:00
efb227d3a7
fix a few KNF nits ..
1999-06-08 10:38:15 +00:00
12006f3c05
Don't clobber the error returned by uiomove() when starting the audio
...
output (in case we got a partial block). Fixes PR #7722 , from
Antti Kantee <pooka@iki.fi>.
1999-06-07 19:24:38 +00:00
92d41a0675
Copied from ../../arch/vax/if/if_uba.c,v
1999-06-06 20:45:21 +00:00
0f8d40c444
Copied from ../../arch/vax/if/if_uba.h,v
1999-06-06 20:45:02 +00:00
2778cc9866
Copied from ../../arch/vax/if/if_qereg.h,v
1999-06-06 19:27:06 +00:00
8237a141e5
Copied from ../../arch/vax/if/if_qe.c,v
1999-06-06 19:26:44 +00:00
508b5c5cee
Bus'ify the mscp code also.
1999-06-06 19:16:18 +00:00
a2692d780b
Fix map register/DMA wait queues.
...
Still to do:
BDP handling. Currently missing.
Ubareset's won't work at all.
1999-06-06 19:14:48 +00:00
162dba620b
Add support for ISA, EISA and ISApnp cards
...
Fixed a bus reset bug which shows on arm32
1999-06-06 17:33:18 +00:00
29c6046a31
Add adv_isa.c entry
1999-06-06 17:30:37 +00:00
8c090be7cb
Add support for the following AdvanSys SCSI ISA cards:
...
Connectivity Products:
ABP510/5150 - Bus-Master ISA (240 CDB) (Footnote 1)
ABP5140 - Bus-Master ISA (16 CDB) (Footnote 1) (Footnote 2)
ABP5142 - Bus-Master ISA with floppy (16 CDB) (Footnote 3)
Single Channel Products:
ABP542 - Bus-Master ISA with floppy (240 CDB)
Footnotes:
1. This board has been shipped by HP with the 4020i CD-R drive.
The board has no BIOS so it cannot control a boot device, but
it can control any secondary SCSI device.
2. This board has been sold by SIIG as the i540 SpeedMaster.
3. This board has been sold by SIIG as the i542 SpeedMaster.
1999-06-06 17:28:58 +00:00
dca7a79c9d
Guys, let's get real. We don't really want an #if !defined() for every possible
...
machine that could concievably have defined an IPL_AUDIO, do we?
1999-06-05 16:51:39 +00:00
67cbdf5623
split sbus audiocs code up so we can share it with the ebus. XXX ebus DMA is probably different.
1999-06-05 14:29:10 +00:00
eca7784d58
XXX avoid redefiing splaudio and IPL_AUDIO on the sparc XXX
1999-06-05 14:26:07 +00:00
d80294fead
Regen.
1999-06-05 14:14:42 +00:00
c5255e5a48
Remove vendor from one of the descriptive strings; it's superfluous.
1999-06-05 14:14:02 +00:00
0e2edfb67a
Very small formatting nit.
1999-06-05 13:43:03 +00:00
a1259a8d1b
Regen.
1999-06-05 10:42:15 +00:00
d256dc6c3c
`rasops_glue' is only here to force the header file's name hence it must
...
be mentioned first in the expression.
Shudder..
1999-06-05 10:42:11 +00:00
bffc27b587
Add Matrox MGA 400, 3Dfx Banshee and Voodoo 3.
1999-06-05 10:41:37 +00:00
e9fe988d72
Regen.
1999-06-05 09:54:29 +00:00
1c05aff552
Add Brother HL-1050 laser printer. Fixes second half of PR kern/7699
...
by Bjoern Labitzke.
1999-06-05 09:54:09 +00:00
2b262e8565
Regen.
1999-06-05 09:44:03 +00:00
fce6975678
Add entry for Riva TNT and correct entry for Riva 128.
...
Fixes first half of PR kern/7699 by Bjoern Labitzke.
1999-06-05 09:43:21 +00:00
9db217428b
Cast size_t to long for printf purposes.
1999-06-05 08:35:45 +00:00
b458b1c57e
In pckbd_decode(), do the remapping of "extended" (multibyte) keys
...
before the elimination of typematic events.
This fixes the case where the "extended" prefix was not ignored and
affected the next keystroke. (seen with the AltGr key)
1999-06-04 15:03:43 +00:00
8c39e1bf02
When adding a hot spare, remember to lock down the main raidPtr
...
structure before mucking with its contents.
1999-06-04 02:02:39 +00:00
60769ea563
At config time, initialize a small amount of space for the disk queues
...
corresponding to the hot spares. We'll need that space when a spare is
actually added. Huge Thanks to Martin Laubach for helping track this down.
1999-06-04 01:51:00 +00:00
3af0ce9e19
Don't count two problems with a single component as two
...
component failures! Also: remember to configure the disk queues for
the spares -- failure to do that is Bad(tm).
Huge Thanks to Martin Laubach for helping track this down.
1999-06-04 01:50:01 +00:00
f2393e39f3
Don't include rasops files unconditionally; only when we have rasterconsole or
...
wsdisplay.
1999-06-02 23:24:54 +00:00
ee9cd19ba7
regen
1999-06-02 08:57:02 +00:00
1fabcae9bf
add SIS 6326 low-end AGP graphics
...
fix CL_PD6832 device id, PR kern/7691 from Paul Dokas
1999-06-02 08:56:03 +00:00
f687b845d0
Make sure bus mastering is enabled; some broken BIOSes don't set this
...
up properly.
1999-06-01 19:17:59 +00:00
2349cbb5b3
Glue in the SiS900 Ethernet controller driver.
1999-06-01 18:29:50 +00:00
ba43886d7e
Device driver for the Silicon Integrated Systems SiS900 10/100 Ethernet
...
chip, found on the IBM Netstation.
1999-06-01 18:19:13 +00:00
7d44fa2e6e
* use format_bytes() to display the disk size
...
* wrap a couple of printf()s
1999-05-31 12:05:39 +00:00
b4bf637a41
Don't let bd.which be unitialized... Thanks Dave!
1999-05-30 21:13:04 +00:00
8567d6cad0
PR/7665: Dave Sainty: X server bell pitch setting doesn't reflect reality
...
Applied with a little more error checking.
1999-05-30 04:21:29 +00:00
70e38aa504
Fix bug uncovered by audio.c fix: Since the monitor control on the ESS
...
is a muting control, not a level control, change the name to reflect that.
XXX The fact that the audio code depends on the string names of the
XXX mixer devices is bogus.
1999-05-30 00:22:59 +00:00
9e14ee3c6e
Fix two small bugs:
...
(1) Fix sense of a strcmp() test so that the monitor subdevice of the
mixer is properly identified.
(2) Use hw_if->set_port() instead of hw_if->get_port() when changinh
the monitor level in audiosetinfo().
Fixes PR kern/7661.
1999-05-30 00:21:08 +00:00
4df5ccb1f6
Now that the ARP code doesn't assume that m_pktdat[0] is the start of the
...
packet(!) we can enable the code that aligns the struct token_header at the
start of the mbuf.
1999-05-29 22:44:11 +00:00
a03c17e53b
Copied from ../../arch/vax/mscp/mscpvar.h,v
1999-05-29 19:13:04 +00:00
14ef56958a
Copied from ../../arch/vax/mscp/mscpreg.h,v
1999-05-29 19:12:53 +00:00
870031c90a
Copied from ../../arch/vax/mscp/mscp_tape.c,v
1999-05-29 19:12:42 +00:00
bf0ac446d2
Copied from ../../arch/vax/mscp/mscp_subr.c,v
1999-05-29 19:11:52 +00:00
29cdff1acd
Copied from ../../arch/vax/mscp/mscp_disk.c,v
1999-05-29 19:11:41 +00:00
6c8c62c541
Copied from ../../arch/vax/mscp/mscp.h,v
1999-05-29 19:11:16 +00:00
bf16b9271a
Copied from ../../arch/vax/mscp/mscp.c,v
1999-05-29 19:11:02 +00:00
39e7e58401
Copied from ../../arch/vax/mscp/files.mscp,v
1999-05-29 19:10:52 +00:00
206d37083c
Copied from ../../arch/vax/uba/uda.c,v
1999-05-29 17:03:17 +00:00
58aa48a579
regen.
1999-05-29 07:12:11 +00:00
5dfbc15479
fix error in previous.
1999-05-29 07:10:33 +00:00
3f99c8bd11
regen.
1999-05-29 07:08:52 +00:00
a250615a3b
s/bus/bridge/ for the sun pci bridges. my bad.
1999-05-29 07:07:51 +00:00
06019caad8
Recognize 900B-TPC. From Robert Elz.
1999-05-29 01:31:17 +00:00
8a6bddab08
Regen.
1999-05-29 01:29:21 +00:00
0ca37269fb
Add 3c900B-TPC product ID. From Robert Elz.
1999-05-29 01:28:52 +00:00
542c5517c5
The DHU code changed to use bus_space.
...
XXX - still need to use bus_dma.
1999-05-28 20:17:29 +00:00
545a67b8d9
Copied from ../../arch/vax/uba/dhureg.h,v
1999-05-28 18:56:57 +00:00
c0777d0846
Copied from ../../arch/vax/uba/dhu.c,v
1999-05-28 18:56:41 +00:00
50b4144943
Moved from ../dec/qbus/ubavar.h,v
1999-05-27 16:04:48 +00:00
708904c240
Moved to ubavar.h,v
1999-05-27 16:04:47 +00:00
6fa26360b3
Moved to ubareg.h,v
1999-05-27 16:04:28 +00:00
72cc499b27
Moved from ../dec/qbus/ubareg.h,v
1999-05-27 16:04:27 +00:00
24a2d9159f
Moved to uba.c,v
1999-05-27 16:04:14 +00:00
466e9982c9
Moved from ../dec/qbus/uba.c,v
1999-05-27 16:04:13 +00:00
3a1ea0ce2f
Moved from ../dec/qbus/files.uba,v
1999-05-27 16:03:57 +00:00
ea56e2d6a7
Moved to files.uba,v
1999-05-27 16:03:56 +00:00
a9f8e269bc
Moved from ../dec/qbus/dzvar.h,v
1999-05-27 16:03:41 +00:00
607566ab67
Moved to dzvar.h,v
1999-05-27 16:03:40 +00:00
fad3ee0de4
Moved from ../dec/qbus/dzreg.h,v
1999-05-27 16:03:13 +00:00
fd1e7f64df
Moved to dzreg.h,v
1999-05-27 16:03:12 +00:00
ca5b486e0b
Moved from ../dec/qbus/dz_uba.c,v
1999-05-27 16:02:50 +00:00
0377900670
Moved to dz_uba.c,v
1999-05-27 16:02:49 +00:00
ae0c1db46f
Moved to dz.c,v
1999-05-27 16:02:33 +00:00
4da3a5fea9
Moved from ../dec/qbus/dz.c,v
1999-05-27 16:02:32 +00:00
e9a34e1482
Moved from ../dec/qbus/dlreg.h,v
1999-05-27 16:02:04 +00:00
fecbb5dd59
Moved to dlreg.h,v
1999-05-27 16:02:03 +00:00
1506452890
Moved from ../dec/qbus/dl.c,v
1999-05-27 16:00:45 +00:00
547475d08e
Moved to dl.c,v
1999-05-27 16:00:44 +00:00
61e5d73035
Fix bus_size_t/size_t/int confusion.
1999-05-27 14:22:28 +00:00
b87dbb8918
in cdclose(), ignore "media change" when calling scsipi_prevent(), after
...
a 'eject -l' some ATAPI drives report this instead of illegal request.
1999-05-27 11:19:04 +00:00
cc46db1ba6
For the PIIX, make sure the PIO_mode and DMA_mode get reset to the values used
...
by the controller for all drives.
1999-05-27 09:45:50 +00:00
f558ec11e2
Directory called qbus instead of uba, per request from Matt/Jason/...
...
(More describing name actually)
1999-05-27 03:45:21 +00:00
c346b0ace0
regen.
1999-05-27 03:05:32 +00:00
8c83c41668
add the UltraSPARC IIi PCI interface
1999-05-27 02:51:19 +00:00
12b6c6d04f
DL-11 driver bus'ified. UNTESTED.
1999-05-26 02:01:49 +00:00
e805bfec25
DZ-11 routines bus'ified. Small fixes to uba routines.
1999-05-26 01:26:17 +00:00
88214f79d2
Pass the appropriate access type for uvm_vslock() based on the FP operation:
...
fpread == VM_PROT_READ|VM_PROT_WRITE, fpwrite == VM_PROT_READ.
1999-05-26 01:09:02 +00:00
7fb0d17b38
First step towards MI Unibus/Q22 bus code.
1999-05-24 20:12:57 +00:00
61d84403a8
Regen
1999-05-24 13:05:40 +00:00
cf715aec57
Fix PR/7634 properly, by adding the card to pcmciadevs
1999-05-24 13:05:12 +00:00
8fb4b44439
SMC 8022 PCMCIA ethercard entry for if_ne_pcmcia.c
...
From Zdenek Salvet <salvet@ics.muni.cz> in PR 7634.
1999-05-24 10:17:49 +00:00
e21201e114
Regen.
1999-05-23 21:28:03 +00:00
a674692065
Add several entries.
1999-05-23 21:26:54 +00:00
080560c8c6
- Setting initial position of cursor is up to caller.
...
- Set cursor position properly for SPARC. From Juergen Hannken-Illjes.
1999-05-23 17:59:39 +00:00
eca0bbe20e
Update doc URL.
1999-05-23 16:07:04 +00:00
544c14bcf6
KNF!
1999-05-23 00:48:46 +00:00
6f9ad5b61d
Since we're now prepending the ethernet header to mbuf on incoming
...
packets, make sure to align the data after the ethernet header.
1999-05-21 13:08:50 +00:00
ac197c5354
Update documentation URLs.
1999-05-21 10:15:23 +00:00
5bb340fef9
This file is superceded by rcons.h.
1999-05-20 21:16:57 +00:00
332dd60029
Fix broken prototype.
1999-05-20 19:56:49 +00:00
4655ae1230
Keep track of vendor id and make sure the vendor string is NUL terminated.
1999-05-20 09:52:35 +00:00
3d6c3b5c03
Update for TI vendor id.
1999-05-20 09:51:13 +00:00
5d6176a144
Regen.
1999-05-20 09:50:39 +00:00
d25385e28e
Change vendor of id 0x0451 to Texas Instruments.
1999-05-20 09:50:09 +00:00
b9f32af4e5
Regen.
1999-05-20 09:23:33 +00:00
10713ae5ad
Change vendor id 0x11c1 to Lucent since that seems to be what it is now.
...
Add a Lucent USB controller.
1999-05-20 09:23:08 +00:00
02bc362e3e
Add arg to rcons_init() that when set causes screen to be cleared.
1999-05-19 20:34:19 +00:00
4bebd3ff7c
Don't clear screen upon startup unless we're running on a pmax (remedies
...
quirky behaviour of px boards). Shuffle come code in rcons_init_ops() in
order to be more clear.
1999-05-19 20:07:34 +00:00
ba2e85e711
32 bits I/O ocasionally fails on some hardware, so the test succeed but
...
the kernel can get a 'protection fault trap' later. Enable the 32 bits I/O
test conditionally on a config flag, disabled by default (problem
reported by kurt.schreiner@uni-mainz.de ).
1999-05-19 14:41:25 +00:00
f98d358a1f
Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
...
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
29184c350f
Add a few more Communication Interface Class subclasses (including Ethernet
...
and *shudder* ATM).
1999-05-18 23:42:56 +00:00
bb3a510fa2
Assign ownership & copyright to TNF. There is probably a procedure for this
...
that I am unaware of. Also some KNF.
1999-05-18 21:51:57 +00:00
8d38841260
Make it possible for this driver tp work again.
...
From Thomas Klausner - wiz@danbala.tuwien.ac.at
1999-05-18 16:41:07 +00:00
d2fe8176fd
regen
1999-05-17 17:08:08 +00:00
2187089e80
add NeoMagic 256AV Video/Audio chip
1999-05-17 17:07:00 +00:00
9c0c171c30
add some #ifdefs to make it link w/o wskbd
...
(especially for vax)
1999-05-17 16:53:43 +00:00
8745214a3c
Make this build without wsdisplay.
1999-05-16 19:21:31 +00:00
f5af676456
white space.
1999-05-16 14:47:52 +00:00
011be0080e
Add vendor/product/release locators. Added in frustration as my HID
...
devices appeared as different devices after some plugging and unplugging. :-)
1999-05-16 13:51:05 +00:00
041a8536ac
s/revision/release/
1999-05-16 12:05:10 +00:00
00930acefa
Improve error handling. Mostly from FreeBSD.
1999-05-16 11:43:32 +00:00
d93fe6b483
now that wscons_glue is gone we can back out rev. 1.16 (which made
...
"pckbd_enable()" polling to deal with calls without process context)
1999-05-15 15:55:55 +00:00
b7a56e27df
Get rid of the timeout-driven wscons_glue stuff which caused a lot of
...
headaches.
Now console keyboard and display are connected at autoconfiguration time,
when the last of them is found. Other keyboards / displays remain
unconnected until a new ioctl (WSDISPLAYIO_SETKEYBOARD) is called.
1999-05-15 14:22:46 +00:00
0d472fafcc
Add diagnostic measures to check for missing font.
1999-05-15 12:56:46 +00:00
f4fedb6139
wsfont cookies <= 0 are invalid, not just those < 0.
1999-05-15 12:54:53 +00:00
9bf01fcbe5
Fix debug printf.
1999-05-14 19:38:44 +00:00
10584c9e73
Sort out the inclusion of wscons source files: the files are only
...
compiled if the corresponding devices are configured.
(Files calling wscons functions have to check whether these are present.)
1999-05-14 16:01:11 +00:00
0c3738a17b
The last change made the driver go into an interrupt loop after a while.
...
Obviously, the TX_DEFERRALS counter must be read.
1999-05-14 15:54:16 +00:00
23ddff5688
use the new "xx" prefixed OUIs because the mapping to the ID register
...
bits differs from the MII_OUI() way
1999-05-14 11:40:28 +00:00
48c49dcb82
regen
1999-05-14 11:38:05 +00:00
416a47bc88
Define OUIs in a more uniform way. OUIs are fixed entities registered
...
with IEEE, so use the "real" OUIs for definitions.
Now unfortunately vendors differ in how the MII ID register bits are
used wrt bit and byte ordering. There is a straightforward way - bits
numbered from LSB to MSB - used by AMD, Intel, NS and QS. This is used
by the current MII_OUI() conversion macro. ICS, Seeq, SiS and TI count
the bits as they appear on the wire, and some differ completely.
Account for these cases by "xx" prefixed OUI definitions which compensate
for this, so the MII_OUI() macro can still be used.
Add AMD (the "real" AMD this time) and the 79c973 PCnet internal PHY.
1999-05-14 11:37:30 +00:00
08db47ae0c
oops, forgot to add these files.
1999-05-14 07:07:16 +00:00
95e0190e23
split the sun ms/kbd drivers into frontend/backend parts at the serial
...
interface border, so that other serial interfaces can be attached to the
ms/kbd. zero functional changes and mostly involves moving code around
a bit. tested on the SS2.
this is necessary to attach the PCI ultrasparc keyboard/mouse drivers.
1999-05-14 06:42:02 +00:00
sommerfeld