cbf1f6f1b9
Move the MPU driver isa/ to ic/.
...
(I didn't move it in the repository because the revision history
is very short and uninteresting. :)
1999-08-01 18:05:39 +00:00
0c0dc211d4
Make an MPU attachment to ISA. Used for old Roland cards. Written
...
by me and gson@araneus.fi (Andreas Gustafsson).
1999-08-01 17:53:39 +00:00
6ca9b225e7
Add a timeout-routine that checks if transmit logic dies, and reset it
...
in that case. This is not uncommon when the interface is heavy loaded.
1999-08-01 15:25:41 +00:00
ba922d31d8
Re-work the Tx side to avoid calling into the tty layer at
...
interrupt time. This was the cause of the 'mmu fault' panics
seen by several people, as the Tx interrupt is at a higher
priority that spltty().
1999-08-01 09:35:05 +00:00
9baa857f5b
Regen.
1999-08-01 08:32:48 +00:00
9657de4af2
Add an entry for the TI PCI1211 PCI-CardBus Bridge.
...
From the cardbus patches.
1999-08-01 08:32:08 +00:00
b6b44d6809
Eliminate the need for needs-count for wsmux. This should make
...
wsdisplays work properly again.
1999-07-30 20:52:27 +00:00
fff1639c50
GRR! Kludge around the extremely annoying wsmux configuration lossage
...
by removing the "| wsdisplay" from the wsmux.c file declaration. This
will cause any kernel which includes wsdisplay but not wsmux explicitly
to fail to link, but at least those of us with multiple wsdisplays on
a single machine can build kernels again.
1999-07-30 20:42:16 +00:00
c03616646c
- Fix TX 66Hz interrupt handling. Verified ok with PMAG-JA as an 8bpp
...
console. XXX troubles in cursor color.
- Typo in comments of MX.
1999-07-30 16:23:43 +00:00
2917356cae
Guard tsleep() with a while (!(wdc_c->flags & AT_DONE)) {}, as suggested by
...
Constantine Sapuntzakis confirmed by Bill Sommerfeld. Although nothing is
supposed to call wakeup on this without setting AT_DONE, it's good practice to
do it this way (the process may be waken up by a setrunnable() call).
1999-07-30 14:59:10 +00:00
09e76a1645
Remove two items that are done.
1999-07-30 11:40:19 +00:00
76dcbfad36
Regen.
1999-07-29 20:58:19 +00:00
8548b384f5
Add some Initio SCSI controller IDs.
1999-07-29 20:56:55 +00:00
3d3f77c49e
Add the wsmux pseudo device.
1999-07-29 18:20:02 +00:00
a81c366fed
Bump MAX_START to 256, so that the ncr driver can work with more than 5
...
devices on the same bus. See PR kern/6347 for details.
1999-07-29 10:00:34 +00:00
7220690fb8
Regen.
1999-07-28 22:38:00 +00:00
4341d92cb3
Correct Acard device names.
...
Add and update a few IBM devices.
Add Toshiba and NEC devices in Portege 3K's.
1999-07-28 22:36:10 +00:00
36e00c28de
fix the previous fix
1999-07-28 10:03:02 +00:00
fb4ecab492
make these compile again s/#endif/#else/
...
again, it is impossible for me to make sure that they work.
1999-07-28 06:35:06 +00:00
0a1820a4e7
regen
1999-07-27 17:55:00 +00:00
424a28aa79
Add vendor ID for Geocast
1999-07-27 17:52:59 +00:00
d6c9ec0a2e
Make this "should work" on big endian systems.
1999-07-27 00:55:34 +00:00
b73b84643f
Add support for the SMC 83c175. Also, print out the chip rev when
...
we attach.
1999-07-27 00:37:34 +00:00
f48807a678
Regen.
1999-07-27 00:24:06 +00:00
b5dc3f5708
Add product ID for the SMC 83c175 Fast Ethernet chip. This is a cousin
...
of the SMC 83c170 which also supports CardBus.
1999-07-27 00:23:47 +00:00
8fa3d8be55
make the JVC 2626 match more than one version, since all seem to be
...
returning errors on the LUN probe.
1999-07-26 22:43:13 +00:00
e6216650d8
Use unsigned integer to hold font bits in putchar(). [This looks like the
...
source of glyph corruption].
1999-07-25 17:36:40 +00:00
4047458551
More DIAGNOSTIC messages.
1999-07-24 01:40:19 +00:00
f6bf685b94
Regen.
1999-07-22 20:58:18 +00:00
baf7e04902
Insert a space in New Media Corporation. Fixes kern/7817 by Lloyd Parkes.
1999-07-22 20:56:38 +00:00
40d9e23179
Define the Volume Tag format.
1999-07-22 17:43:53 +00:00
a41907cbf8
- Style nits
...
- Kill some of the dainbramage in variable-depth copycols()
1999-07-21 19:19:03 +00:00
5cef006d40
Need to splbio()/splx() protect some of the reconstruction stuff.
...
Without this, we have potentially bad interatctions with the pool
code.
1999-07-21 03:15:26 +00:00
963921febe
regen
1999-07-20 20:59:03 +00:00
62adeef8f6
add TI TVP4020 Permedia 2
1999-07-20 20:58:20 +00:00
29664a379a
The options actually used are RASTERCONSOLE_{FG,BG}COL, not
...
RASTERCONS_{FG,BG}COL. defopt the rigth ones.
1999-07-20 18:05:15 +00:00
ce7cb7114d
rf_UnconfigureVnodes() needs to be called in the DO_RAID_FAIL macro.
1999-07-19 01:36:07 +00:00
0c7600ca4e
sectorsPerStripeUnit should be larger than 0. If it isn't, simply fail.
...
(Thanks to Thor Lancelot Simon for noting the problem).
1999-07-19 01:35:19 +00:00
5122ae5f44
Recognize 3c905C.
1999-07-15 18:10:29 +00:00
4dae830922
Regen.
1999-07-15 18:06:39 +00:00
4495d8362a
product 3COM 3C905CTX 0x9200
1999-07-15 18:02:08 +00:00
50eef750e4
Regen.
1999-07-15 14:53:13 +00:00
8a5bb754c7
Add Cinemaster C 3.0 DVD Decoder.
1999-07-15 14:52:48 +00:00
5d94c1dc69
Clarify that the empty string, not the string ANY, as the network name means
...
pick any access point
1999-07-15 14:31:52 +00:00
e314d1d844
Correct the sense of the PCR_FLINK100 bit. From Dave Sainty, PR #7832 .
1999-07-14 23:57:36 +00:00
48f2389776
Add shutdown hook to turn off card.
...
Fix BPF tap code.
1999-07-14 23:07:29 +00:00
76b2d00f39
Regen.
1999-07-14 23:03:09 +00:00
a641b41593
Add/change a few Adaptec controller IDs.
1999-07-14 23:02:01 +00:00
62af9404e6
Skip LUN check for all versions of the UMAX Astra 1220S as suggested
...
by Dan McMahill in PR kern/7991.
1999-07-14 22:34:18 +00:00
5d33b8fc14
Install a header needed by userspace wiconfig program
1999-07-14 22:32:05 +00:00
52faa3e2d7
Blitz port of the FreeBSD wi* driver for the Lucent WaveLan IEEE
...
PCMCIA wireless LAN.
Original driver written by Bill Paul <wpaul@ctr.columbia.edu>
1999-07-14 22:24:07 +00:00
313081da93
Add a few 802.11 cards
1999-07-14 22:13:27 +00:00
021319d9b3
Avoid crashing if we are forced to close() before teh open() completed
...
(can happen on disconnect, probably due do dubious logic in vdevgone()).
1999-07-14 19:12:07 +00:00
e859716a79
Unused in MI code.
1999-07-12 19:47:40 +00:00
cf917747a1
Add a driver for the ESS Technology Solo-1 PCI AudioDrive line of chips.
1999-07-12 15:13:30 +00:00
7d8abaa49e
Regen.
1999-07-12 15:04:41 +00:00
ecbc7c6afd
Change the ESS Solo-1 description string to match the data sheet.
1999-07-12 15:02:46 +00:00
0612a1ddef
Fix typo in a printf, from Soren S. Jorvan.
1999-07-12 13:49:38 +00:00
497378ce6d
Copied from ../../arch/vax/bi/uba_bi.c,v
1999-07-12 13:43:40 +00:00
af86c7da93
Copied from ../../arch/vax/bi/kdbreg.h,v
1999-07-12 13:43:24 +00:00
f5e891549d
Copied from ../../arch/vax/bi/kdb.c,v
1999-07-12 13:43:11 +00:00
fa113488d5
Copied from ../../arch/vax/bi/bivar.h,v
1999-07-12 13:42:55 +00:00
3b01a5972f
Copied from ../../arch/vax/bi/bireg.h,v
1999-07-12 13:42:42 +00:00
f6e8b1b918
Copied from ../../arch/vax/bi/bi.c,v
1999-07-12 13:42:24 +00:00
361422bc96
Apply some bulk transfer bug fixes from FreeBSD.
1999-07-12 05:22:50 +00:00
54b747eb16
In pcmcia_pars_cis_tuple(): in the PCMCIA_TPCE_FS_MEMSPACE_TABLE case
...
there is one more memspace in the table then the PCMCIA_TPCE_MS_COUNT
mask produces.
1999-07-11 00:34:37 +00:00
c95ed3d2e5
In pcmcia_print_cis(): When printing io and mem spaces don't append trailing
...
0s if length or hostaddr are zero, instead DTRT.
1999-07-11 00:26:29 +00:00
2422638ad5
Fix a buglet in the driver's DMA buffer list ipmlementation, causing the next-
...
in-list (wrong) descriptor structure of the buffer in question to be freed.
1999-07-10 16:46:19 +00:00
e5d15c0dc6
Add another CD to the quirk table.
1999-07-08 14:24:42 +00:00
324c76b3d9
Once upon a time, long long ago, there was a "fix" added to the
...
RAIDframe driver to stop it from eating too much kernel memory when
writing data. But that fix had a nasty side-affect of hurting write
performance (*much* more than I thought it would). These changes nuke
that "fix", and instead put in a more reasonable mechanism for limiting
the number of simultaneous IO's which can be happening for each RAID device.
The result is a noticeable improvement in write throughput. The End.
1999-07-08 00:45:23 +00:00
5f1ede624f
Make the kthread API a bit friendlier to loadable kernel modules.
1999-07-06 21:51:22 +00:00
7b3258b6a7
Make the kthread API a bit more friendly to loadable kernel modules.
1999-07-06 21:44:09 +00:00
7875415701
Add the detach and activate entry points to the cfattach struct.
1999-07-06 07:42:23 +00:00
319c42848d
Add some sanity checks.
1999-07-06 07:12:03 +00:00
c9d36d5b4c
add in (controlled by option) 2200 Expanded Lun F/W
1999-07-06 05:43:51 +00:00
8fc3744ddd
Upgrade 2100 F/W and add 2200 f/w.
1999-07-05 20:33:58 +00:00
f428cf36fa
Change to approved NASA/Ames copyright. Add Fabric support. Fix SCCLUN support.
...
Add code that tries to track LoopID shifting.
1999-07-05 20:31:35 +00:00
3bb408eb05
Change to approved NASA/Ames copyright. Add in Qlogic 2200 support.
1999-07-05 20:28:11 +00:00
636e8f4688
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 05:55:23 +00:00
111e8a47c4
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37).
...
This means that all SIIG PCI serial/parallel cards (described on their
web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 05:38:05 +00:00
f3a6841709
make it compile if WSDISPLAY_COMPAT_RAWKBD is defined, but NWSDISPLAY not,
...
reported by Kazushi Marukawa <jam@pobox.com>
1999-07-01 11:18:20 +00:00
118d2b1d4f
IPv6 kernel code, based on KAME/NetBSD 1.4, SNAP kit 19990628.
...
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
1999-07-01 08:12:45 +00:00
6d864c0914
add driver for the Bit3 PCI-VME adapter, without the DMA parts for now
1999-06-30 17:45:38 +00:00
3a845702d7
A reference to http://members.hyperlink.net.au/~chart/pci.htm in comments;
...
this new effort at collecting PCI data outside the PCI SIG replaces the
one that was referenced in here before.
No regeneration required.
1999-06-30 16:52:52 +00:00
83eb712e3c
update for new VME framework
1999-06-30 15:07:45 +00:00
44418fdf70
new, more mi, VME framework
1999-06-30 15:06:05 +00:00
b177c7a397
Totally redo the way device detach is done. It now uses a kernel event
...
thread and the config detach method.
Squish a number of space leaks on detach.
1999-06-30 06:44:22 +00:00
dd048d428b
Make it possible to detach wsmouse and wskbd.
...
XXX wskbd probably needs some more work.
1999-06-30 06:21:21 +00:00
622f3d3db5
Regen.
1999-06-28 04:10:26 +00:00
f69aea19d2
Add some weirdo modem.
1999-06-28 04:09:53 +00:00
dbd86a254c
add driver for realtek 8129/8139, from freebsd, with mii stuff kicked out
1999-06-27 15:19:40 +00:00
746543928c
regen
1999-06-27 15:15:00 +00:00
120b30daf4
add some realtek 8139 clones
1999-06-27 15:13:54 +00:00
a7e4d3ac4d
Add the Sbus front-end for the HME driver.
1999-06-27 12:47:52 +00:00
5041f2a9dd
HME ethernet driver.
...
Note: this is work in progress; needs testing and tweaking. mgr has
promised to do that..
1999-06-27 12:26:32 +00:00
b2c4582d6d
Regen.
1999-06-26 16:26:57 +00:00
0ddfad8dfa
"www.usb.org" says that:
...
a) Logitech has vendor ID 0x046d.
b) That vendor ID 0x05ac is Apple Computer.
1999-06-26 16:26:20 +00:00
6e72bbdb8a
Regen.
1999-06-26 15:21:17 +00:00
62f6e7122f
Correct description of vendor "LOGITECH": this is not Apple.
1999-06-26 15:20:53 +00:00
3fd5344a95
Add suspend/resume handling to the UHCI driver.
...
Currently it only works if the BIOS saves enough state of the controller.
Once I find a machine with a dumber BIOS I'll try to improve that.
1999-06-26 08:30:17 +00:00
701eca7576
Remove unneeded #include.
1999-06-26 03:14:25 +00:00
7ef0c8eef3
Add a quirk for mice with reversed Z-axis.
1999-06-26 00:09:15 +00:00
55fbc23acc
Regen.
1999-06-26 00:08:15 +00:00
c4c81ec6fa
Add another Logitech mouse.
1999-06-26 00:07:35 +00:00
59da37b37e
Go to splbio() when calling scsipi_free_xs(), just like the SCSI counterpart.
...
Fixes PR #7853 , Paul Dokas <dokas@cs.umn.edu>.
1999-06-25 18:58:54 +00:00
09a2fed6f9
- Show 1bpp for MX during configuration stage.
...
- Replace memory layout 'struct' with array/pointer access.
1999-06-25 03:33:20 +00:00
4f2e48c4d2
Don't turn on the engine too early.
...
Add and use QEDEBUG.
1999-06-24 19:59:14 +00:00
9335333dee
Issue a reset command when initializing.
1999-06-24 19:56:51 +00:00
8dd0e06ba1
- Hide memory mapped VDAC hardware register layouts using the array
...
element access instead of C bitfield (hello, BCPL).
- XXX Some TURBOchannel framebuffers might need shutdownhooks(). It
seems not necessarily hardware sprite cursor images are re-initialized
by DECstation PROMs upon exits from kernel.
- XXX It'd be an arguable point to allow user programs to change the
shade of gray freely for pixel value 0 and 1.
1999-06-24 03:51:14 +00:00
463e258cdb
- Allow to choose the 'color' of sprite cursor. Only red cmap makes sense.
...
- Drop TC Alpha support (OSF/1 and Digital UNIX never supports PMAG-AA).
1999-06-23 23:48:28 +00:00
4fd8325ec6
Resurect the old register read/write test for non-ATA/ATAPI drives, to avoid
...
false matches on controllers which properly respond to a WDCC_RECAL command.
Should close PR port-i386/7702 (the author tested this patch, and said it
solves his problem).
1999-06-23 19:00:17 +00:00
52d0d1398b
Regen after tyop.
1999-06-23 10:41:08 +00:00
1720673bc2
Corrected tyop.
1999-06-23 10:40:16 +00:00
2abd78cfd3
Regen.
1999-06-23 10:37:10 +00:00
e44e18cc01
Add manufacturer Lasat Communications A/S, product Lasat Credit 288 Modem.
1999-06-23 10:36:19 +00:00
b02dbae17e
In xxx_mediachange(), if there is no callback to the front-end, just
...
return 0 instead of EINVAL. In this case, there will only be one media
type, and the upper-level if_media code will ensure that the user is
setting to that type.
This matches changes Jason made a while back to sys/dev/ic/lance.c
1999-06-23 04:17:10 +00:00
839bcbbe9f
- Fix an error in the depth of PMAG-AA MX. This driver can take 72Hz
...
virtical video retrace interrupt and was verified ok on Nanao grayscale
monitor. XXX seems still confusion/mistake on Bt431 cursor image
manipulation.
1999-06-23 01:58:22 +00:00
37d80b004f
Remove dead file; alphabetize
1999-06-20 18:17:22 +00:00
97e1165dd2
add qe and qd.
1999-06-20 18:09:22 +00:00
df81191ccd
Remove dead file
1999-06-20 18:07:18 +00:00
e0199475d8
QDSS should now work as console.
...
XXX - still vax-specific.
1999-06-20 17:58:56 +00:00
5e906a9454
Fix a erroneous malloc.
1999-06-20 17:56:29 +00:00
2c9abc499a
Copied from ../../arch/vax/uba/qfont.c,v
1999-06-20 17:55:12 +00:00
9484404e28
Copied from ../../arch/vax/include/qevent.h,v
1999-06-20 17:54:51 +00:00
e49d4f4bd3
Copied from ../../arch/vax/include/qduser.h,v
1999-06-20 17:54:27 +00:00
09b92a09e3
Copied from ../../arch/vax/include/qdreg.h,v
1999-06-20 17:54:13 +00:00
08e6c30baa
Copied from ../../arch/vax/include/qdioctl.h,v
1999-06-20 17:53:53 +00:00
6f0df397d0
Copied from ../../arch/vax/uba/qd.c,v
1999-06-20 17:53:33 +00:00
b75d5b1fe6
Fix tyop.
1999-06-20 16:44:49 +00:00
50f084159c
SCTRL2 register number wrong. PR #7756 , Johan Danielsson.
1999-06-20 16:42:37 +00:00
4a0270a264
Intel i82557 driver is now split into bus and chip bits.
1999-06-20 16:35:40 +00:00
206460244e
Bus-independent back-end driver for Intel i82557 fast Ethernet chips.
1999-06-20 16:33:28 +00:00
3ccbec3742
Totally rewritten DEQNA device driver, that uses the bus.h interface
...
instead. This almost doubled the receive speed of the interface :-)
1999-06-20 00:04:47 +00:00
36da665f8c
Added NewMedia BusToaster, an Adaptec 152x compatible.
1999-06-19 18:50:28 +00:00
fb7137cfd9
Regen
1999-06-19 18:49:34 +00:00
4e0161f8dc
Regen
1999-06-19 18:17:14 +00:00
c32aeb153b
Added NewMedia BusToaster SCSI Host Adapter
1999-06-19 18:16:07 +00:00
d98b0bd725
Regen.
1999-06-19 04:51:42 +00:00
0650293580
Add Sony CXD 1947A FireWrire Controller and Neomagic 128XD.
1999-06-19 04:49:52 +00:00
a6a09bcdd6
Add support for ES18[67][89]. From PR #7427 by AW9K-NNK@asahi-net.or.jp,
...
Nonaka Kimihiro.
1999-06-18 20:25:23 +00:00
041cfb14aa
Fix that ANNOYING transmit timeout bug, caused by an unfortunate interaction
...
between a bug in the receive path (buffer length used instead of actual
received frame length) and the ARP code not correctly setting the length
of the reused mbuf, which all told caused the transmit logic in the chip
to wedge.
Also, make sure to count received packets.
Found and fixed by Zdenek Salvet <salvet@ics.muni.cz>, PR #7809 .
1999-06-18 17:44:06 +00:00
3adf25374a
The extraneous interrupt that seems to occur after a reconnect and a DMA transfer
...
starts running can occur on both DMA in and DMA out. I missed the little comment
in the Mach driver for the DMA out case. Also, only ignore the interrupt if the
TC is non-zero (to match the Mach driver).
1999-06-18 05:30:53 +00:00
12c2ab7750
Regen.
1999-06-18 04:55:27 +00:00
25b9bffe81
Add some Apple and MOT products.
1999-06-18 04:54:06 +00:00
12347b2657
Make uvm_vslock() return the error code from uvm_fault_wire(). All places
...
which use uvm_vslock() should now test the return value. If it's not
KERN_SUCCESS, wiring the pages failed, so the operation which is using
uvm_vslock() should error out.
XXX We currently just EFAULT a failed uvm_vslock(). We may want to do
more about translating error codes in the future.
1999-06-17 15:47:22 +00:00
92f90fcb92
STK 9490 && SD-3 drives incorrectly quirked as not supporting the LOAD command.
...
Anyway, just because a drive doesn't support the LOAD (to BOT) command does
not mean that the drive doesn't support the UNLOAD command. Also note and
print errors in rewinds and unloads (and errors in writing closing filemarks
for same).
1999-06-17 04:20:55 +00:00
b6429ec3c5
In scsipi_done(), call scsipi_free_xs() at splbio().
1999-06-16 07:35:31 +00:00
10b0c75443
- Don't even try to emulate WSATTR_HILIT on mono displays
...
- WSATTR_REVERSE is a capability of both mono/color
1999-06-15 22:34:45 +00:00
05a0ca4737
Fix stupid alignment bug. The 'slop' stuff is due for replacement with masks
...
RSN per the README.
1999-06-15 21:34:05 +00:00
475ed73e46
Get rid of a bunch of code that was part of an old USBDI proposal, but that
...
is unused in our USB stack.
Once upon a time, when I started writing the USB stack for NetBSD, there
was an effort to make a standard for how USB device drivers should interact
with the rest of the USB stack. This effort had contributors from just
about all Un*x camps (but not Micro$oft :). I based my design on one of their
early proposals since I thought it would be a good idea if we could all
share device drivers with a minimum effort. Shortly after I started my work
all the free Un*x people were thrown out of the USBDI work since we did not
pay the USB membership fee. Well, some time has passed now and the work of
the standardization group is almost public again. But alas, the new standard
has grown to be a monster! I do not want to have this as the basis for the
*BSD USB stack; it is far too complicated.
So, since we are not even close to being compilant with the standard, I've
thrown out some old baggage.
1999-06-14 17:09:57 +00:00
656245dc18
Check that the hub ports actually power up.
1999-06-14 16:59:47 +00:00
86abd11d42
Remember to pass down the proc pointer when adding a hot spare.
...
(Thanks to Martin J. Laubach for helping track this one down.)
1999-06-13 20:36:17 +00:00
cff0f6b1e4
Don't pre-load the identify message into the fifo just just before the command register
...
is written. This significantly reduces, if not eliminates, the problem reported in
PR#5510. It stops the problem on my 5000/200, and two other people have verified that
it fixes the problem on their 5000/200s. I'm waiting for confirmation from the PR
originator before closing the PR.
1999-06-13 17:21:29 +00:00
001471550c
Move chip version check from advlib.c to adv_isa.c
1999-06-12 12:10:30 +00:00
35e149ef50
Move chip version check from advlib.c to adv_pci.c
1999-06-12 12:09:58 +00:00
d0fb45fdf3
Clean up some stuff
...
Remove chip version check
Now compile again on 68k based systems
1999-06-12 12:09:01 +00:00
5b4a75d281
scsipi_free_xs() wants to be called at splbio; do it.
1999-06-12 11:19:00 +00:00
3fffa45b75
Guard global `rnd_mempool' against interrupts.
...
Use appropriate flags in pool_get().
1999-06-12 10:58:47 +00:00
9f43c5a1f2
If we're the console keyboard, automatically enable the keyboard.
...
Should fix part of console keyboard problems on macppc. The usb keyboard will
now work on boot! Doesn't fix problems with keyboard freaking out when
changing LED state.
Thanks to Mattias & Lennart & Tsubai for input on resolving this problem.
1999-06-11 19:05:13 +00:00
e3b1b88d76
- Errors in case analysis...
1999-06-11 01:44:47 +00:00
f4be9af151
- Rework copycols() with SFB ASIC calls.
1999-06-11 00:56:09 +00:00
c65a504ed5
Add more debug.
1999-06-10 15:48:27 +00:00
2959234be5
Fix a bug in bulk input. Discovered by Joel Chen <jchen@liberate.com>.
1999-06-09 22:57:16 +00:00
cd0a68c3f6
Fix use of & when % was appropriate.
1999-06-09 19:40:54 +00:00
27b9cd0724
Remove a redundant test.
1999-06-09 17:04:45 +00:00
efb227d3a7
fix a few KNF nits ..
1999-06-08 10:38:15 +00:00
12006f3c05
Don't clobber the error returned by uiomove() when starting the audio
...
output (in case we got a partial block). Fixes PR #7722 , from
Antti Kantee <pooka@iki.fi>.
1999-06-07 19:24:38 +00:00
92d41a0675
Copied from ../../arch/vax/if/if_uba.c,v
1999-06-06 20:45:21 +00:00
0f8d40c444
Copied from ../../arch/vax/if/if_uba.h,v
1999-06-06 20:45:02 +00:00
2778cc9866
Copied from ../../arch/vax/if/if_qereg.h,v
1999-06-06 19:27:06 +00:00
8237a141e5
Copied from ../../arch/vax/if/if_qe.c,v
1999-06-06 19:26:44 +00:00
508b5c5cee
Bus'ify the mscp code also.
1999-06-06 19:16:18 +00:00
a2692d780b
Fix map register/DMA wait queues.
...
Still to do:
BDP handling. Currently missing.
Ubareset's won't work at all.
1999-06-06 19:14:48 +00:00
162dba620b
Add support for ISA, EISA and ISApnp cards
...
Fixed a bus reset bug which shows on arm32
1999-06-06 17:33:18 +00:00
29c6046a31
Add adv_isa.c entry
1999-06-06 17:30:37 +00:00
8c090be7cb
Add support for the following AdvanSys SCSI ISA cards:
...
Connectivity Products:
ABP510/5150 - Bus-Master ISA (240 CDB) (Footnote 1)
ABP5140 - Bus-Master ISA (16 CDB) (Footnote 1) (Footnote 2)
ABP5142 - Bus-Master ISA with floppy (16 CDB) (Footnote 3)
Single Channel Products:
ABP542 - Bus-Master ISA with floppy (240 CDB)
Footnotes:
1. This board has been shipped by HP with the 4020i CD-R drive.
The board has no BIOS so it cannot control a boot device, but
it can control any secondary SCSI device.
2. This board has been sold by SIIG as the i540 SpeedMaster.
3. This board has been sold by SIIG as the i542 SpeedMaster.
1999-06-06 17:28:58 +00:00
dca7a79c9d
Guys, let's get real. We don't really want an #if !defined() for every possible
...
machine that could concievably have defined an IPL_AUDIO, do we?
1999-06-05 16:51:39 +00:00
67cbdf5623
split sbus audiocs code up so we can share it with the ebus. XXX ebus DMA is probably different.
1999-06-05 14:29:10 +00:00
eca7784d58
XXX avoid redefiing splaudio and IPL_AUDIO on the sparc XXX
1999-06-05 14:26:07 +00:00
d80294fead
Regen.
1999-06-05 14:14:42 +00:00
c5255e5a48
Remove vendor from one of the descriptive strings; it's superfluous.
1999-06-05 14:14:02 +00:00
0e2edfb67a
Very small formatting nit.
1999-06-05 13:43:03 +00:00
a1259a8d1b
Regen.
1999-06-05 10:42:15 +00:00
d256dc6c3c
`rasops_glue' is only here to force the header file's name hence it must
...
be mentioned first in the expression.
Shudder..
1999-06-05 10:42:11 +00:00
bffc27b587
Add Matrox MGA 400, 3Dfx Banshee and Voodoo 3.
1999-06-05 10:41:37 +00:00
e9fe988d72
Regen.
1999-06-05 09:54:29 +00:00
1c05aff552
Add Brother HL-1050 laser printer. Fixes second half of PR kern/7699
...
by Bjoern Labitzke.
1999-06-05 09:54:09 +00:00
2b262e8565
Regen.
1999-06-05 09:44:03 +00:00
fce6975678
Add entry for Riva TNT and correct entry for Riva 128.
...
Fixes first half of PR kern/7699 by Bjoern Labitzke.
1999-06-05 09:43:21 +00:00
9db217428b
Cast size_t to long for printf purposes.
1999-06-05 08:35:45 +00:00
b458b1c57e
In pckbd_decode(), do the remapping of "extended" (multibyte) keys
...
before the elimination of typematic events.
This fixes the case where the "extended" prefix was not ignored and
affected the next keystroke. (seen with the AltGr key)
1999-06-04 15:03:43 +00:00
8c39e1bf02
When adding a hot spare, remember to lock down the main raidPtr
...
structure before mucking with its contents.
1999-06-04 02:02:39 +00:00
60769ea563
At config time, initialize a small amount of space for the disk queues
...
corresponding to the hot spares. We'll need that space when a spare is
actually added. Huge Thanks to Martin Laubach for helping track this down.
1999-06-04 01:51:00 +00:00
3af0ce9e19
Don't count two problems with a single component as two
...
component failures! Also: remember to configure the disk queues for
the spares -- failure to do that is Bad(tm).
Huge Thanks to Martin Laubach for helping track this down.
1999-06-04 01:50:01 +00:00
f2393e39f3
Don't include rasops files unconditionally; only when we have rasterconsole or
...
wsdisplay.
1999-06-02 23:24:54 +00:00
ee9cd19ba7
regen
1999-06-02 08:57:02 +00:00
1fabcae9bf
add SIS 6326 low-end AGP graphics
...
fix CL_PD6832 device id, PR kern/7691 from Paul Dokas
1999-06-02 08:56:03 +00:00
f687b845d0
Make sure bus mastering is enabled; some broken BIOSes don't set this
...
up properly.
1999-06-01 19:17:59 +00:00
2349cbb5b3
Glue in the SiS900 Ethernet controller driver.
1999-06-01 18:29:50 +00:00
ba43886d7e
Device driver for the Silicon Integrated Systems SiS900 10/100 Ethernet
...
chip, found on the IBM Netstation.
1999-06-01 18:19:13 +00:00
augustss