656245dc18
Check that the hub ports actually power up.
1999-06-14 16:59:47 +00:00
86abd11d42
Remember to pass down the proc pointer when adding a hot spare.
...
(Thanks to Martin J. Laubach for helping track this one down.)
1999-06-13 20:36:17 +00:00
cff0f6b1e4
Don't pre-load the identify message into the fifo just just before the command register
...
is written. This significantly reduces, if not eliminates, the problem reported in
PR#5510. It stops the problem on my 5000/200, and two other people have verified that
it fixes the problem on their 5000/200s. I'm waiting for confirmation from the PR
originator before closing the PR.
1999-06-13 17:21:29 +00:00
001471550c
Move chip version check from advlib.c to adv_isa.c
1999-06-12 12:10:30 +00:00
35e149ef50
Move chip version check from advlib.c to adv_pci.c
1999-06-12 12:09:58 +00:00
d0fb45fdf3
Clean up some stuff
...
Remove chip version check
Now compile again on 68k based systems
1999-06-12 12:09:01 +00:00
5b4a75d281
scsipi_free_xs() wants to be called at splbio; do it.
1999-06-12 11:19:00 +00:00
3fffa45b75
Guard global `rnd_mempool' against interrupts.
...
Use appropriate flags in pool_get().
1999-06-12 10:58:47 +00:00
9f43c5a1f2
If we're the console keyboard, automatically enable the keyboard.
...
Should fix part of console keyboard problems on macppc. The usb keyboard will
now work on boot! Doesn't fix problems with keyboard freaking out when
changing LED state.
Thanks to Mattias & Lennart & Tsubai for input on resolving this problem.
1999-06-11 19:05:13 +00:00
e3b1b88d76
- Errors in case analysis...
1999-06-11 01:44:47 +00:00
f4be9af151
- Rework copycols() with SFB ASIC calls.
1999-06-11 00:56:09 +00:00
c65a504ed5
Add more debug.
1999-06-10 15:48:27 +00:00
2959234be5
Fix a bug in bulk input. Discovered by Joel Chen <jchen@liberate.com>.
1999-06-09 22:57:16 +00:00
cd0a68c3f6
Fix use of & when % was appropriate.
1999-06-09 19:40:54 +00:00
27b9cd0724
Remove a redundant test.
1999-06-09 17:04:45 +00:00
efb227d3a7
fix a few KNF nits ..
1999-06-08 10:38:15 +00:00
12006f3c05
Don't clobber the error returned by uiomove() when starting the audio
...
output (in case we got a partial block). Fixes PR #7722 , from
Antti Kantee <pooka@iki.fi>.
1999-06-07 19:24:38 +00:00
92d41a0675
Copied from ../../arch/vax/if/if_uba.c,v
1999-06-06 20:45:21 +00:00
0f8d40c444
Copied from ../../arch/vax/if/if_uba.h,v
1999-06-06 20:45:02 +00:00
2778cc9866
Copied from ../../arch/vax/if/if_qereg.h,v
1999-06-06 19:27:06 +00:00
8237a141e5
Copied from ../../arch/vax/if/if_qe.c,v
1999-06-06 19:26:44 +00:00
508b5c5cee
Bus'ify the mscp code also.
1999-06-06 19:16:18 +00:00
a2692d780b
Fix map register/DMA wait queues.
...
Still to do:
BDP handling. Currently missing.
Ubareset's won't work at all.
1999-06-06 19:14:48 +00:00
162dba620b
Add support for ISA, EISA and ISApnp cards
...
Fixed a bus reset bug which shows on arm32
1999-06-06 17:33:18 +00:00
29c6046a31
Add adv_isa.c entry
1999-06-06 17:30:37 +00:00
8c090be7cb
Add support for the following AdvanSys SCSI ISA cards:
...
Connectivity Products:
ABP510/5150 - Bus-Master ISA (240 CDB) (Footnote 1)
ABP5140 - Bus-Master ISA (16 CDB) (Footnote 1) (Footnote 2)
ABP5142 - Bus-Master ISA with floppy (16 CDB) (Footnote 3)
Single Channel Products:
ABP542 - Bus-Master ISA with floppy (240 CDB)
Footnotes:
1. This board has been shipped by HP with the 4020i CD-R drive.
The board has no BIOS so it cannot control a boot device, but
it can control any secondary SCSI device.
2. This board has been sold by SIIG as the i540 SpeedMaster.
3. This board has been sold by SIIG as the i542 SpeedMaster.
1999-06-06 17:28:58 +00:00
dca7a79c9d
Guys, let's get real. We don't really want an #if !defined() for every possible
...
machine that could concievably have defined an IPL_AUDIO, do we?
1999-06-05 16:51:39 +00:00
67cbdf5623
split sbus audiocs code up so we can share it with the ebus. XXX ebus DMA is probably different.
1999-06-05 14:29:10 +00:00
eca7784d58
XXX avoid redefiing splaudio and IPL_AUDIO on the sparc XXX
1999-06-05 14:26:07 +00:00
d80294fead
Regen.
1999-06-05 14:14:42 +00:00
c5255e5a48
Remove vendor from one of the descriptive strings; it's superfluous.
1999-06-05 14:14:02 +00:00
0e2edfb67a
Very small formatting nit.
1999-06-05 13:43:03 +00:00
a1259a8d1b
Regen.
1999-06-05 10:42:15 +00:00
d256dc6c3c
`rasops_glue' is only here to force the header file's name hence it must
...
be mentioned first in the expression.
Shudder..
1999-06-05 10:42:11 +00:00
bffc27b587
Add Matrox MGA 400, 3Dfx Banshee and Voodoo 3.
1999-06-05 10:41:37 +00:00
e9fe988d72
Regen.
1999-06-05 09:54:29 +00:00
1c05aff552
Add Brother HL-1050 laser printer. Fixes second half of PR kern/7699
...
by Bjoern Labitzke.
1999-06-05 09:54:09 +00:00
2b262e8565
Regen.
1999-06-05 09:44:03 +00:00
fce6975678
Add entry for Riva TNT and correct entry for Riva 128.
...
Fixes first half of PR kern/7699 by Bjoern Labitzke.
1999-06-05 09:43:21 +00:00
9db217428b
Cast size_t to long for printf purposes.
1999-06-05 08:35:45 +00:00
b458b1c57e
In pckbd_decode(), do the remapping of "extended" (multibyte) keys
...
before the elimination of typematic events.
This fixes the case where the "extended" prefix was not ignored and
affected the next keystroke. (seen with the AltGr key)
1999-06-04 15:03:43 +00:00
8c39e1bf02
When adding a hot spare, remember to lock down the main raidPtr
...
structure before mucking with its contents.
1999-06-04 02:02:39 +00:00
60769ea563
At config time, initialize a small amount of space for the disk queues
...
corresponding to the hot spares. We'll need that space when a spare is
actually added. Huge Thanks to Martin Laubach for helping track this down.
1999-06-04 01:51:00 +00:00
3af0ce9e19
Don't count two problems with a single component as two
...
component failures! Also: remember to configure the disk queues for
the spares -- failure to do that is Bad(tm).
Huge Thanks to Martin Laubach for helping track this down.
1999-06-04 01:50:01 +00:00
f2393e39f3
Don't include rasops files unconditionally; only when we have rasterconsole or
...
wsdisplay.
1999-06-02 23:24:54 +00:00
ee9cd19ba7
regen
1999-06-02 08:57:02 +00:00
1fabcae9bf
add SIS 6326 low-end AGP graphics
...
fix CL_PD6832 device id, PR kern/7691 from Paul Dokas
1999-06-02 08:56:03 +00:00
f687b845d0
Make sure bus mastering is enabled; some broken BIOSes don't set this
...
up properly.
1999-06-01 19:17:59 +00:00
2349cbb5b3
Glue in the SiS900 Ethernet controller driver.
1999-06-01 18:29:50 +00:00
ba43886d7e
Device driver for the Silicon Integrated Systems SiS900 10/100 Ethernet
...
chip, found on the IBM Netstation.
1999-06-01 18:19:13 +00:00
7d44fa2e6e
* use format_bytes() to display the disk size
...
* wrap a couple of printf()s
1999-05-31 12:05:39 +00:00
b4bf637a41
Don't let bd.which be unitialized... Thanks Dave!
1999-05-30 21:13:04 +00:00
8567d6cad0
PR/7665: Dave Sainty: X server bell pitch setting doesn't reflect reality
...
Applied with a little more error checking.
1999-05-30 04:21:29 +00:00
70e38aa504
Fix bug uncovered by audio.c fix: Since the monitor control on the ESS
...
is a muting control, not a level control, change the name to reflect that.
XXX The fact that the audio code depends on the string names of the
XXX mixer devices is bogus.
1999-05-30 00:22:59 +00:00
9e14ee3c6e
Fix two small bugs:
...
(1) Fix sense of a strcmp() test so that the monitor subdevice of the
mixer is properly identified.
(2) Use hw_if->set_port() instead of hw_if->get_port() when changinh
the monitor level in audiosetinfo().
Fixes PR kern/7661.
1999-05-30 00:21:08 +00:00
4df5ccb1f6
Now that the ARP code doesn't assume that m_pktdat[0] is the start of the
...
packet(!) we can enable the code that aligns the struct token_header at the
start of the mbuf.
1999-05-29 22:44:11 +00:00
a03c17e53b
Copied from ../../arch/vax/mscp/mscpvar.h,v
1999-05-29 19:13:04 +00:00
14ef56958a
Copied from ../../arch/vax/mscp/mscpreg.h,v
1999-05-29 19:12:53 +00:00
870031c90a
Copied from ../../arch/vax/mscp/mscp_tape.c,v
1999-05-29 19:12:42 +00:00
bf0ac446d2
Copied from ../../arch/vax/mscp/mscp_subr.c,v
1999-05-29 19:11:52 +00:00
29cdff1acd
Copied from ../../arch/vax/mscp/mscp_disk.c,v
1999-05-29 19:11:41 +00:00
6c8c62c541
Copied from ../../arch/vax/mscp/mscp.h,v
1999-05-29 19:11:16 +00:00
bf16b9271a
Copied from ../../arch/vax/mscp/mscp.c,v
1999-05-29 19:11:02 +00:00
39e7e58401
Copied from ../../arch/vax/mscp/files.mscp,v
1999-05-29 19:10:52 +00:00
206d37083c
Copied from ../../arch/vax/uba/uda.c,v
1999-05-29 17:03:17 +00:00
58aa48a579
regen.
1999-05-29 07:12:11 +00:00
5dfbc15479
fix error in previous.
1999-05-29 07:10:33 +00:00
3f99c8bd11
regen.
1999-05-29 07:08:52 +00:00
a250615a3b
s/bus/bridge/ for the sun pci bridges. my bad.
1999-05-29 07:07:51 +00:00
06019caad8
Recognize 900B-TPC. From Robert Elz.
1999-05-29 01:31:17 +00:00
8a6bddab08
Regen.
1999-05-29 01:29:21 +00:00
0ca37269fb
Add 3c900B-TPC product ID. From Robert Elz.
1999-05-29 01:28:52 +00:00
542c5517c5
The DHU code changed to use bus_space.
...
XXX - still need to use bus_dma.
1999-05-28 20:17:29 +00:00
545a67b8d9
Copied from ../../arch/vax/uba/dhureg.h,v
1999-05-28 18:56:57 +00:00
c0777d0846
Copied from ../../arch/vax/uba/dhu.c,v
1999-05-28 18:56:41 +00:00
50b4144943
Moved from ../dec/qbus/ubavar.h,v
1999-05-27 16:04:48 +00:00
708904c240
Moved to ubavar.h,v
1999-05-27 16:04:47 +00:00
6fa26360b3
Moved to ubareg.h,v
1999-05-27 16:04:28 +00:00
72cc499b27
Moved from ../dec/qbus/ubareg.h,v
1999-05-27 16:04:27 +00:00
24a2d9159f
Moved to uba.c,v
1999-05-27 16:04:14 +00:00
466e9982c9
Moved from ../dec/qbus/uba.c,v
1999-05-27 16:04:13 +00:00
3a1ea0ce2f
Moved from ../dec/qbus/files.uba,v
1999-05-27 16:03:57 +00:00
ea56e2d6a7
Moved to files.uba,v
1999-05-27 16:03:56 +00:00
a9f8e269bc
Moved from ../dec/qbus/dzvar.h,v
1999-05-27 16:03:41 +00:00
607566ab67
Moved to dzvar.h,v
1999-05-27 16:03:40 +00:00
fad3ee0de4
Moved from ../dec/qbus/dzreg.h,v
1999-05-27 16:03:13 +00:00
fd1e7f64df
Moved to dzreg.h,v
1999-05-27 16:03:12 +00:00
ca5b486e0b
Moved from ../dec/qbus/dz_uba.c,v
1999-05-27 16:02:50 +00:00
0377900670
Moved to dz_uba.c,v
1999-05-27 16:02:49 +00:00
ae0c1db46f
Moved to dz.c,v
1999-05-27 16:02:33 +00:00
4da3a5fea9
Moved from ../dec/qbus/dz.c,v
1999-05-27 16:02:32 +00:00
e9a34e1482
Moved from ../dec/qbus/dlreg.h,v
1999-05-27 16:02:04 +00:00
fecbb5dd59
Moved to dlreg.h,v
1999-05-27 16:02:03 +00:00
1506452890
Moved from ../dec/qbus/dl.c,v
1999-05-27 16:00:45 +00:00
547475d08e
Moved to dl.c,v
1999-05-27 16:00:44 +00:00
61e5d73035
Fix bus_size_t/size_t/int confusion.
1999-05-27 14:22:28 +00:00
b87dbb8918
in cdclose(), ignore "media change" when calling scsipi_prevent(), after
...
a 'eject -l' some ATAPI drives report this instead of illegal request.
1999-05-27 11:19:04 +00:00
cc46db1ba6
For the PIIX, make sure the PIO_mode and DMA_mode get reset to the values used
...
by the controller for all drives.
1999-05-27 09:45:50 +00:00
f558ec11e2
Directory called qbus instead of uba, per request from Matt/Jason/...
...
(More describing name actually)
1999-05-27 03:45:21 +00:00
c346b0ace0
regen.
1999-05-27 03:05:32 +00:00
8c83c41668
add the UltraSPARC IIi PCI interface
1999-05-27 02:51:19 +00:00
12b6c6d04f
DL-11 driver bus'ified. UNTESTED.
1999-05-26 02:01:49 +00:00
e805bfec25
DZ-11 routines bus'ified. Small fixes to uba routines.
1999-05-26 01:26:17 +00:00
88214f79d2
Pass the appropriate access type for uvm_vslock() based on the FP operation:
...
fpread == VM_PROT_READ|VM_PROT_WRITE, fpwrite == VM_PROT_READ.
1999-05-26 01:09:02 +00:00
7fb0d17b38
First step towards MI Unibus/Q22 bus code.
1999-05-24 20:12:57 +00:00
61d84403a8
Regen
1999-05-24 13:05:40 +00:00
cf715aec57
Fix PR/7634 properly, by adding the card to pcmciadevs
1999-05-24 13:05:12 +00:00
8fb4b44439
SMC 8022 PCMCIA ethercard entry for if_ne_pcmcia.c
...
From Zdenek Salvet <salvet@ics.muni.cz> in PR 7634.
1999-05-24 10:17:49 +00:00
e21201e114
Regen.
1999-05-23 21:28:03 +00:00
a674692065
Add several entries.
1999-05-23 21:26:54 +00:00
080560c8c6
- Setting initial position of cursor is up to caller.
...
- Set cursor position properly for SPARC. From Juergen Hannken-Illjes.
1999-05-23 17:59:39 +00:00
eca0bbe20e
Update doc URL.
1999-05-23 16:07:04 +00:00
544c14bcf6
KNF!
1999-05-23 00:48:46 +00:00
6f9ad5b61d
Since we're now prepending the ethernet header to mbuf on incoming
...
packets, make sure to align the data after the ethernet header.
1999-05-21 13:08:50 +00:00
ac197c5354
Update documentation URLs.
1999-05-21 10:15:23 +00:00
5bb340fef9
This file is superceded by rcons.h.
1999-05-20 21:16:57 +00:00
332dd60029
Fix broken prototype.
1999-05-20 19:56:49 +00:00
4655ae1230
Keep track of vendor id and make sure the vendor string is NUL terminated.
1999-05-20 09:52:35 +00:00
3d6c3b5c03
Update for TI vendor id.
1999-05-20 09:51:13 +00:00
5d6176a144
Regen.
1999-05-20 09:50:39 +00:00
d25385e28e
Change vendor of id 0x0451 to Texas Instruments.
1999-05-20 09:50:09 +00:00
b9f32af4e5
Regen.
1999-05-20 09:23:33 +00:00
10713ae5ad
Change vendor id 0x11c1 to Lucent since that seems to be what it is now.
...
Add a Lucent USB controller.
1999-05-20 09:23:08 +00:00
02bc362e3e
Add arg to rcons_init() that when set causes screen to be cleared.
1999-05-19 20:34:19 +00:00
4bebd3ff7c
Don't clear screen upon startup unless we're running on a pmax (remedies
...
quirky behaviour of px boards). Shuffle come code in rcons_init_ops() in
order to be more clear.
1999-05-19 20:07:34 +00:00
ba2e85e711
32 bits I/O ocasionally fails on some hardware, so the test succeed but
...
the kernel can get a 'protection fault trap' later. Enable the 32 bits I/O
test conditionally on a config flag, disabled by default (problem
reported by kurt.schreiner@uni-mainz.de ).
1999-05-19 14:41:25 +00:00
f98d358a1f
Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
...
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
29184c350f
Add a few more Communication Interface Class subclasses (including Ethernet
...
and *shudder* ATM).
1999-05-18 23:42:56 +00:00
bb3a510fa2
Assign ownership & copyright to TNF. There is probably a procedure for this
...
that I am unaware of. Also some KNF.
1999-05-18 21:51:57 +00:00
8d38841260
Make it possible for this driver tp work again.
...
From Thomas Klausner - wiz@danbala.tuwien.ac.at
1999-05-18 16:41:07 +00:00
d2fe8176fd
regen
1999-05-17 17:08:08 +00:00
2187089e80
add NeoMagic 256AV Video/Audio chip
1999-05-17 17:07:00 +00:00
9c0c171c30
add some #ifdefs to make it link w/o wskbd
...
(especially for vax)
1999-05-17 16:53:43 +00:00
8745214a3c
Make this build without wsdisplay.
1999-05-16 19:21:31 +00:00
f5af676456
white space.
1999-05-16 14:47:52 +00:00
011be0080e
Add vendor/product/release locators. Added in frustration as my HID
...
devices appeared as different devices after some plugging and unplugging. :-)
1999-05-16 13:51:05 +00:00
041a8536ac
s/revision/release/
1999-05-16 12:05:10 +00:00
00930acefa
Improve error handling. Mostly from FreeBSD.
1999-05-16 11:43:32 +00:00
d93fe6b483
now that wscons_glue is gone we can back out rev. 1.16 (which made
...
"pckbd_enable()" polling to deal with calls without process context)
1999-05-15 15:55:55 +00:00
b7a56e27df
Get rid of the timeout-driven wscons_glue stuff which caused a lot of
...
headaches.
Now console keyboard and display are connected at autoconfiguration time,
when the last of them is found. Other keyboards / displays remain
unconnected until a new ioctl (WSDISPLAYIO_SETKEYBOARD) is called.
1999-05-15 14:22:46 +00:00
0d472fafcc
Add diagnostic measures to check for missing font.
1999-05-15 12:56:46 +00:00
f4fedb6139
wsfont cookies <= 0 are invalid, not just those < 0.
1999-05-15 12:54:53 +00:00
9bf01fcbe5
Fix debug printf.
1999-05-14 19:38:44 +00:00
10584c9e73
Sort out the inclusion of wscons source files: the files are only
...
compiled if the corresponding devices are configured.
(Files calling wscons functions have to check whether these are present.)
1999-05-14 16:01:11 +00:00
0c3738a17b
The last change made the driver go into an interrupt loop after a while.
...
Obviously, the TX_DEFERRALS counter must be read.
1999-05-14 15:54:16 +00:00
23ddff5688
use the new "xx" prefixed OUIs because the mapping to the ID register
...
bits differs from the MII_OUI() way
1999-05-14 11:40:28 +00:00
48c49dcb82
regen
1999-05-14 11:38:05 +00:00
416a47bc88
Define OUIs in a more uniform way. OUIs are fixed entities registered
...
with IEEE, so use the "real" OUIs for definitions.
Now unfortunately vendors differ in how the MII ID register bits are
used wrt bit and byte ordering. There is a straightforward way - bits
numbered from LSB to MSB - used by AMD, Intel, NS and QS. This is used
by the current MII_OUI() conversion macro. ICS, Seeq, SiS and TI count
the bits as they appear on the wire, and some differ completely.
Account for these cases by "xx" prefixed OUI definitions which compensate
for this, so the MII_OUI() macro can still be used.
Add AMD (the "real" AMD this time) and the 79c973 PCnet internal PHY.
1999-05-14 11:37:30 +00:00
08db47ae0c
oops, forgot to add these files.
1999-05-14 07:07:16 +00:00
95e0190e23
split the sun ms/kbd drivers into frontend/backend parts at the serial
...
interface border, so that other serial interfaces can be attached to the
ms/kbd. zero functional changes and mostly involves moving code around
a bit. tested on the SS2.
this is necessary to attach the PCI ultrasparc keyboard/mouse drivers.
1999-05-14 06:42:02 +00:00
0d0cc4aa14
Rework the way ukbd attaches itself as the console (again). We now allow
...
the code to pick the first USB keyboard instance as the console, ignoring
which USB controller it's on. Should eventually allow detaching of the
console keyboard.
From Jason Thorpe <thorpej@nas.nasa.gov>
1999-05-13 23:34:38 +00:00
e16867970c
More DIAGNOSTIC tests.
1999-05-13 23:29:41 +00:00
aed277e3de
More digitizer defines.
1999-05-13 23:29:11 +00:00
daf0e5b05c
Replace two instances of TNF copyright with one (was replicated for two
...
separate contributers).
1999-05-13 21:46:17 +00:00
2fc0e43760
just say no to __BROKEN_INDIRECT_CONFIG
1999-05-12 22:55:14 +00:00
61bf929d14
Do a fairly large internal restructuring to accomodate dual-bus host adapters
...
(e.g., the 1240). Include the new 1080/1240 NVRAM layout reading code. Some
moderately significant mailbox changes were necessary also to accomodate a
second channel.
1999-05-12 18:59:23 +00:00
7f137a35ff
add a few missing mbox commands
1999-05-12 16:45:58 +00:00
a10888f463
roll ISP 1080/1240 f/w to latest level
1999-05-12 16:45:04 +00:00
9c5ccdf883
Don't count deferrals as output errors. It's only a (single) output error
...
if an excessive number of deferrals causes the transmission to abort.
1999-05-12 15:33:29 +00:00
d480a15932
Regen.
1999-05-11 09:56:56 +00:00
91e572f76d
Another mouse.
1999-05-11 09:56:32 +00:00
ee57a7f5ff
add swedish keyboard map from Johan Danielsson (joda@pdc.kth.se) per
...
PR kern/6983, and US-Dvorak from Matt Knopp (mhat@fundsxpress.com ) per
PR kern/7429
1999-05-11 09:24:11 +00:00
51a0e1a705
define swedish layout and "dvorak" variant
1999-05-11 09:21:07 +00:00
83b019c919
Set the data link type to DLT_PPP_SERIAL so that tcpdump can do
...
something useful with our captured frames.
1999-05-11 02:57:58 +00:00
ea2a114cf0
Fix a serious bug in bandwidth accounting that thrashed memory.
...
Thanks to Joel Chen <jchen@nc.com> for tracking it down.
1999-05-09 22:48:35 +00:00
c9ee8bf3c4
Fix a couple of problems w/ 3c574 support. Doesn't quite work yet, but
...
it's a little closer.
1999-05-09 18:48:52 +00:00
90d35111e1
In rasops_erasecols(), try word aligned case before halfword aligned.
1999-05-09 17:50:27 +00:00
69e451c1ce
Call ws routines at spltty() from interrupt routines.
1999-05-09 15:10:30 +00:00
aaa0308140
Handle exclusive open bit differently.
1999-05-09 14:38:01 +00:00
d11fcba216
More debug.
1999-05-09 14:37:18 +00:00
63e051b6cf
Minor rearrengment for better readability.
1999-05-09 14:36:42 +00:00
86bb7f7d58
Add some Mass Storage constants.
1999-05-09 14:35:50 +00:00
cbec5fc966
Regen.
1999-05-09 14:35:13 +00:00
e4b1b00d56
Add Microsoft DDS80.
1999-05-09 14:34:41 +00:00
fbdd142801
Regen.
1999-05-07 21:20:12 +00:00
0fd4ff06c2
Added CIRRUS CL_PD6832 from "Johnny C. Lam" <lamj@stat.cmu.edu> in kern/7119.
1999-05-07 21:19:06 +00:00
4d524d7360
Regen.
1999-05-07 21:11:20 +00:00
91ddf1d6a6
Added TI PCI1251 from joda@pdc.kth.se (Johan Danielsson) in kern/6873.
1999-05-07 21:09:31 +00:00
1669ea470b
regen
1999-05-07 15:40:57 +00:00
1ce7678fb8
add another AGP graphics chip and a PCI-VME interface
1999-05-07 15:38:40 +00:00
1d082ddc15
- Sweep abit preparing for code merge to have common 'vdacops' across
...
various graphics cards.
1999-05-07 08:00:30 +00:00
307a48b721
Regen
1999-05-07 00:57:46 +00:00
e735c2bf67
Add TI LYNX FireWire Controller (as used in the Apple B&W G3)
1999-05-07 00:56:46 +00:00
375d7c32f2
Add a way for machine-dependent code to tell a USB controller that it
...
has the console input device. The USB keyboard driver uses this to
attach the first USB keyboard instance as the console keyboard.
Unfortunately, this must still be deferred to autoconfiguration time,
but there's not much we can do about that right now.
1999-05-06 19:12:22 +00:00
8c630939a3
regen
1999-05-06 14:29:21 +00:00
10c5298d7e
add pci devices found in U5's:
...
- ati weird mach64
- ebus bus
- `network' hme compatible ethernet
- `simba' PCI bus
1999-05-06 06:17:39 +00:00
964b69ec84
Back out previous. Thanks to cgd for pointing out another way to do this.
1999-05-06 01:10:28 +00:00
2a4490daa5
Add a `bus' member to the pci_attach_args. This is not normally used,
...
but some child drivers might need to know this information.
1999-05-06 01:01:19 +00:00
bb619306e2
Add needs-flag to the ukbd device.
1999-05-06 00:42:16 +00:00
f8e8703b5e
Add patch from Manuel Bouyer -- his mail message said:
...
By code inspection I found 2 bugs in the ATAPI code, one may be the cause
of your problem: A counter is not reset when issuing the request_sense
command. This is c_skip, the counter used to track the offset in the data
buffer when a data tranfer needs multiple phases. The effect of this is that
the sense data transfered may be stored outside the sense buffer (sense buffer
+ some, potentially several KB, offset). This can only occur in PIO mode,
DMA is not affected.
This doesn't occur in "normal" use because when reading a data CD, either
the sense is issued for a non-data command (in which case c_skip stays to
0), or an error occured and no data has been transfered, and c_skip is still 0.
I can't see a case where a data READ/WRITE could cause a sense tranfer without
error.
The second problem is that b_resid can be set to a false value (resulting of
the sense tranfer and not the data transfer). Again this is not a problem with
usual data tranfers because both values ends up being 0 when no error occurs.
1999-05-05 21:35:15 +00:00
9893727873
Fix the way we compute the mode to use: for multiword DMA, the used mode was
...
2 less than the one we could really use, so for multiword DMA mode 0 or 1,
the driver tried to use DMA mode 255 or 254 (0 - 2 with a u_int8_t).
1999-05-05 15:24:59 +00:00
dc8d07a096
Fix OFW_PCI_PHYS_HI_DEVICEMASK value.
1999-05-05 08:09:34 +00:00
dbe4c0c061
Make this compile again.
1999-05-04 23:55:27 +00:00
9382ef37c1
Define some things related to the PCI Bus binding to OpenFirmware.
1999-05-04 20:08:04 +00:00
5aa72a711d
Pull in slightly modified ioctl() routine from psm.c (handles WSMOUSEIO_SRES).
1999-05-03 15:50:38 +00:00
04888a4736
Update ioctl routine to handle WSMOUSEIO_SRES case.
1999-05-03 15:45:16 +00:00
0a77d05407
Add ioctl definitions for setting mouse resolution, scale factor and sample
...
rate. Add two new display types (DEC PX, PXG). Replace instances of '???' in
comments about DEC hardware with meaningful representations.
1999-05-03 15:43:25 +00:00
7bffc1e720
Protect WDCDEBUG from multiple definitions.
1999-05-03 07:44:47 +00:00
1a1efc6b68
In lance_mediachange(), if there is no callback to the front-end, just
...
return 0 instead of EINVAL. In this case, there will only be one media
type, and the upper-level if_media code will ensure that the user is setting
to that type.
In other words, don't require the front-end to provide the no-op.
1999-04-30 18:15:04 +00:00
b7ae9f8e40
Convert some bogus panic()s into printf()s.
1999-04-30 15:29:24 +00:00
b2c6b9a41d
- Nuke debugging aids mistakenly committed.
1999-04-30 09:43:23 +00:00
4f8cf68674
Rototillage; make this actually useful. To wit:
...
- Initialize more of the Bt463's registers, instead of leaving them
in undefined states. Notably, the window type table is set up
with 8-plane pseudocolor and 24-plane truecolor modes.
- Bus-space-ify, mostly. Could use some more cleanup, but not until
the rest of the tga stuff is converted, too.
- Do the TGA/RAMDAC communication dance more carefully.
- Explain a lot more of what's going on in comments.
1999-04-30 02:47:42 +00:00
b14028acc2
- I finally learned CSR_A register of IMS G332 VDAC must be treated as
...
write only. Read-motify-write operation breaks its video mode.
- VDAC regiters are now initialized as ULTRIX does.
1999-04-30 00:44:11 +00:00
8fb6c6124b
From Onno van der Linden:
...
Reorganise the driver some what.
Rename tr_reset() to the more appropriate tr_stop().
Create a common tropic reset routine and use it in the frontends.
Move the code in tr_config() which is only used in the card attachment
routines into a new tr_attach() function.
Take adapter off the ring through tr_shutdown() in a shutdown hook.
This simplifies the bus-specific frontend.
1999-04-29 15:47:02 +00:00
53af2d0054
Initialize db in copycols() to zero to pacify gcc, as noted by Simon Burge.
...
This doesn't change anything until it's fixed.
1999-04-29 03:38:39 +00:00
34480e41c4
Add cookie for wsfont to rasops_info.
1999-04-29 02:49:40 +00:00
e2db3e3f25
Update usage comment.
1999-04-29 02:42:43 +00:00
770b67425d
Accelerate scrolling. Originally by Roland Dowdeswell, revised by
...
{drocher,ross}@netbsd.org.
1999-04-28 23:24:33 +00:00
5847397a4d
Add EEPROM_SSI EEPROM field (hardware revision-level info).
1999-04-28 22:47:44 +00:00
188c3f6ae5
Fix for PR kern/7483: ex driver gets bogus MAC address with 3c905B
1999-04-28 17:34:01 +00:00
894ce34c9d
Improved 509B-in-PnP mode detection (Christoph Badura, Jonathan Stone):
...
Verify EEPROM checksum, extract card rev-level, test capabilities
word, then test high-order config bits to verify card is in PnP mode,
and skip if so.
1999-04-28 01:20:01 +00:00
55fd59f1e0
Make PCI IDE DMA work on big-endian systems.
1999-04-28 00:18:12 +00:00
a9cd83c7af
Regen.
1999-04-27 21:32:05 +00:00
9fb29eae72
Update vendor names from an official(?) list.
1999-04-27 21:30:53 +00:00
d992bbf22c
Regen.
1999-04-27 18:09:00 +00:00
c05572b5b7
Add Gravis GamePad Pro (from Soren Jorvang).
1999-04-27 18:08:35 +00:00
0837de9c4b
Add support for the Fujitsu Towa LA501 Ethernet card. PR #6524 , Stephen Ma.
1999-04-27 04:56:18 +00:00
ae3e4919c2
Regen.
1999-04-27 04:52:04 +00:00
7931c9f84e
Add the Fujitsu LA501 Ethernet card. PR #6524 , Stephen Ma.
1999-04-27 04:48:43 +00:00
d5a491540c
Disable power management until the bug that caused it to hang the
...
machine can be found.
Addresses kern/6488, from Thorsten Frueauf.
1999-04-27 02:53:30 +00:00
3dc48bf302
Bump WSFONT_L2R/R2L by +1 so 0 can mean no specific order is required.
...
Change entry for QVSS to match bitorder.
1999-04-26 23:41:57 +00:00
82f0525910
Make the 3Com Etherlink XL driver work on big-endian systems. From
...
Izumi Tsutsui, PR #7279 .
1999-04-26 23:28:31 +00:00
1eb689a712
Make the VIA Rhine driver work on big-endian systems. From Izumi Tsutsui,
...
PR #7305 .
1999-04-26 23:19:10 +00:00
5ea46286eb
mii_phy_auto(): don't rely on an implicit declaration of the waitfor argument.
1999-04-26 14:48:57 +00:00
a6f7f56fde
Remove crud remaining from userland mockup.
1999-04-26 04:29:12 +00:00
f9510a4f4b
Innumerable fixes and improvements. README contains list of remaining bugs
...
that need to be squashed.
1999-04-26 04:27:47 +00:00
caf44885ea
Change WSFONT_LITTLE/WSFONT_BIG to WSFONT_L2R/WSFONT_R2L to reduce possible
...
confusion.
1999-04-26 04:24:22 +00:00
569836a986
It is no longer necessary to protect bus_dma_[un]load() at splbio, since
...
sparc bus_dma*() functions now protect their own internals..
1999-04-25 10:40:53 +00:00
6aaa1ee1b7
Shut 'gcc -Wuninitialized' up.
1999-04-25 03:02:05 +00:00
4c7a2ee3b0
Fix a couple of problems in the PCscsi-PCI driver:
...
* resid in pcscp_dma_intr() should also be set in the data out phase.
* Don't set up DMA in the transfer pad operations.
* Change URL of the PDF technical manual to the index page.
* include <machine/bswap.h> on big endian machines.
Fixes timeouts writing large blocks to tapes. From Izumi Tsutsui,
PR 7252.
1999-04-25 01:20:02 +00:00
207f873ac2
Fix an mbuf leak in the strict alignment case of packet reception.
1999-04-24 22:09:56 +00:00
83f9ab3c87
Implement asynchronous autonegotiation when driven by the MII tick
...
(one-second clock). Prevents .5s delays every 5 seconds when the interface
is up but there is no link. Fixes PR 7361.
1999-04-23 04:24:32 +00:00
c3f1aa0d3e
Don't send any data upstream if we're not open yet.
1999-04-22 20:37:37 +00:00
3800206dc5
Map the Home and End keys as xterm does.
1999-04-22 20:06:02 +00:00
afe636b9fa
Add some digitizer usage codes.
1999-04-22 01:57:01 +00:00
6ee9a851df
Let `mapchar' in operations set decide if characters (c > 127) are printable.
1999-04-22 00:46:36 +00:00
81eb5b98aa
Add a couple of missing splbio()/splx() pairs that caused pool corruption.
1999-04-21 22:14:15 +00:00
1fcbe7ae13
Use the right buffer in immediate mode.
1999-04-21 19:02:26 +00:00
cc3feba3f5
Don't attach an 3bc509B as ep? at isa if the EEPROM is set to to PnP mode.
...
See PR# port-i386/7428
1999-04-20 22:07:37 +00:00
52db3a158e
Correct QESTAT `%b' format string.
1999-04-20 20:24:39 +00:00
d93e27676e
Remove splbio()/splserial(), which should not try to protect bus_dma*(9)
...
internals.
1999-04-20 20:21:04 +00:00
713d4e0462
KNF nits.
1999-04-20 06:48:58 +00:00
055b827e11
Calling DELAY() during polling for command completion of the normal
...
per-packet discard of every received packet increases latency and
decrease throughput. INstead, Spin on S_COMMAND_IN_PROGESS for enough
iterations as the expected time to completion. Only do DELAY()/poll
loops (as suggested by Jason Thorpe) if spinning fails.
Take PCI as fastest case and compute worst-case estimate.
Shorten DELAY() in S_COMMAND_COMPLETE polling-loop up 10, loop-count
down. to speed up epreset() completion (m/c filter change, ifup/ipdown, etc).
1999-04-20 04:40:24 +00:00
07c7535688
* Make doubly sure that the ep shutdownhooks are run at splnet() or above.
...
* Clear the `enabled' bit in the softc so late hardware interrupts
(e.g., just after the full reset) done as part of shutdown) are dropped.
* Eliminate loops that poll forever on S_COMMAND_IN_PROGRESS to complete.
Add inline function with bounded loopcount plus small delay, to avoid
bugs in EISA hardware which never sets S_COMMAND_IN_PROGRESS.
Use for both TX_RESET/RX_RESET/GLOBAL_RESET cmds, and polling for
discard-Rx completion
1999-04-19 23:26:48 +00:00
4b0326d939
Get rid of delay() in com_common_putc() because the Shark delay() is borked
...
and can't be called until after the timers are setup. (It should not use
a timer, or it should have a fallback algorithm.)
1999-04-19 19:27:31 +00:00
552465011e
Revert revision 1.159. The correct answer was not to re-break the
...
serial console support, but rather to fix the Shark delay().
1999-04-18 22:02:47 +00:00
fe72ae262f
Rebuilt from 'isapnpdevs'.
1999-04-18 13:21:01 +00:00
690bd69d3e
Add Diamond Supra 336i to device list.
1999-04-18 00:35:30 +00:00
c28fffe947
Fix enet_vendor entries for Compex Linkport Enet B (PR 7238)
1999-04-16 22:35:49 +00:00
cd6eaa20b1
Print register contents before we modify it.
1999-04-16 13:35:41 +00:00
6224c1beda
Correct wrong board IDs (used ID definition from FreeBSD)
1999-04-15 23:51:44 +00:00
b5f3e628a3
If setting to pio mode < 3 fails, try to set pio mode 3 before returning
...
EIO. The spec says ATAPI devices should support "PIO 3 or better".
They are supposed to support less as well. Setting the device to a highter
mode than the controller shoul'nt be a problem, and this is likely what
happens with legaty ISA controllers.
Solve problem reported by Ruey-Shyang Guo.
1999-04-15 16:21:27 +00:00
94d00cdb29
Bump timeout to 10s only for ATAPI devices, 1s is fine for IDE drives once
...
they are ready.
1999-04-15 09:41:09 +00:00
c0735a01c5
Replace qvss8x15 with version from NetBSD/vax, which contains the full ISO
...
character set.
1999-04-14 23:06:26 +00:00
380d12dfbd
Complete bugfix in rev 1.3: increase read-parameter-block timeout to 10s
...
(as used for the hardware for which rev 1.3 was made.)
1999-04-14 22:23:15 +00:00
9603b90966
Add missing RCONS_2BPP and RCONS_16BPP options for compatibility with code
...
that has not yet changed over to 'rasops'.
1999-04-14 18:43:24 +00:00
619320f97d
Remove courier11x18 due to licensing concerns. Fixup license on lucida16x29.
1999-04-14 18:25:47 +00:00
af729a150c
initialize 'p' for lame gcc-2.7.2.2 flow analysis.
1999-04-14 03:26:34 +00:00
0028097812
Fix ex_read_eeprom() for 3c57x.
1999-04-13 23:07:25 +00:00
979a80207e
Fix duplicate "3com" from attach, as noted in PR#7607.
1999-04-13 22:34:05 +00:00
4084111fca
Make copyrights conform.
1999-04-13 20:37:21 +00:00
2bf9a70e67
Endian-ness bugfix for elink3 on big-endian hosts.
...
Big-endian CPUs should use bus_space_{read,write}_multi_stream methods
to PIO packet data to NIC in 16-bit or 32-bit chunks.
Make it so.
Since we don't have stream methods on all ports yet (esp. i386), use
the bus_space_{read,write}_multi methods if the compile-time
stream-method feature-test macro is not set.
Originally from tsubai@netbsd.org , via HAYAKAWA koichi's cardbus patches.
1999-04-13 20:23:52 +00:00
1c9990c901
Removed pending write of fully-functional MI driver.
1999-04-13 19:06:54 +00:00
ce7a13c654
Remove px driver pending write of fully-functional MI driver.
1999-04-13 19:06:53 +00:00
8fe6730f9a
Many enchancements to rcons to support ANSI color and all attributes
...
properly. All output now performed using a 'struct wsdisplay_emulops'.
1999-04-13 18:43:17 +00:00
a9ef1be75b
iso8x16 font removed until such time as licensing can be clarified.
1999-04-13 18:34:13 +00:00
d8a02e8017
Code cleanup. Add ri_bswap member to 'struct rasops_info' to indicate that
...
framebuffer endianness differs from CPU (for 15,16,32-bit displays).
1999-04-13 03:02:40 +00:00
de43e7cc8d
Fixed licensing due to a foobar on my behalf.
1999-04-13 00:40:07 +00:00
7db08b6507
Initial import of wsfont, an in-kernel font table for wscons/rcons.
1999-04-13 00:24:05 +00:00
14d2ed835e
Initial import of 'rasops', the new raster operations set for wscons/rcons.
1999-04-13 00:17:57 +00:00
9e87738e9d
Add entries for TI, Ricoh, Toshiba PCI-to-cardbus bridge chips, so
...
we can identify them as cardbus chips supported by the cardbus patches.
Add entry for OPTI chipsets whose interrupts arent properly set up by
some BIOSes.
From cardbus patches<ftp://nandra.iri.co.jp/pub/NetBSD/CardBus by
HAYAKAWA Koichi <haya@tcad.ulsi.sony.co.jp>.
1999-04-12 23:18:16 +00:00
b13e5d1469
Quote "AS IS" as in the majority of Carnegy Mellon notices.
1999-04-12 20:38:17 +00:00
4882ae464f
Fix a couple of compiler warnings on the Alpha. Pointed out by Tim Rightnour.
1999-04-12 19:39:59 +00:00
4622761326
Enable workaround for isapnp assigning already used interrupts to pnp
...
cards by masking them out with a "options ISAPNP_ALLOC_INTR_MASK=..."
in kernel config.
1999-04-12 19:31:27 +00:00
ecab881e98
PR 6852 from Chris Jones <cjones@hideo.nervana.montana.edu>.
...
This handles the interrupt structure of Compex boards.
1999-04-12 04:31:55 +00:00
503de51fdd
Fix probe code for IDE devices:
...
- Don't rely on ATA signature: some ide controllers seems to not transmit it
properly (SIMIDE on arm32 machines). Instead, when we guess a drive is here
after reset, just mark it as ATA and OLD is it's not ATAPI.
- at attach time, use IDENTIFY to eliminate ghost from the probe. If the
drive had the old flag and IDENTIFY failed, issue a WDCC_RECAL command
to detect a pre-ATA disk. If IDENTIFY succeded, remove the OLD flag,
it's obviously not a pre-ATA disk.
- add a new controller flag, WDC_CAPABILITY_PREATA, used to shorcut parts
of the probe (not necessary, but makes the probe/attach faster). This is
only set by the ISA front-end, all other controllers supported can't have
pre-ATA drives attached.
The mechanism used are more or less the same as before, they have just been
reordered. Should solve port-arm32/7324 (waiting for feedback).
1999-04-11 20:50:28 +00:00
2a614bc836
add support for 80x40 screens
1999-04-10 14:02:11 +00:00
71c5a6babd
Fix ethernet address location for Compex Linkport ENET-B. From PR 7238.
1999-04-09 23:19:27 +00:00
57ba75e2fc
Correct a misleading comment copied over from the PCIC version of this file.
1999-04-08 16:14:29 +00:00
e91bdf1c67
Add SCSI_IGNORE_NOT_READY to the flags for CDIOCCLOSE: some devices will
...
attempt to spin up, and report an error if there's no CD. Fixes port-i386/7345.
1999-04-08 16:12:31 +00:00
c2752835f7
Fix a long-standing bug with the ACAP_* flags:
...
- the cap field is a u_int8_t, so none of the defined flags would fit in.
Looks like nobody had a drive using 16 bytes commands.
- the ACAP_DRQ_* flags are all wrong. Just remove them and use the definitions
from ata/atareg.h, there's no need to duplicate theses. The effect of this
was that we were always polling for the command phase, even for drives
with interrupt DRQ. This didn't break until the code was changed to support
shared interrupts.
Should fix the lookup problems or 'boot hangs' reported by some users, and
kern/7111.
1999-04-08 11:29:01 +00:00
9f560505d4
Allow re-writing parity on a RAID 0 to trivially succeed, and to set the
...
clean bit. This is somewhat bogus as RAID 0 does not have any parity,
but is a slightly cleaner than other solutions, and makes the handling
of clean bits for RAID 0 consistent with the handling of clean bits at
other RAID levels.
1999-04-07 14:17:10 +00:00
29936d77d4
Now that we do real use of CDIOCCLOSE, we can have SSS_START|SSS_LOEJ
...
in scsipi_start(). Adjust test so that timeout will let enouth time to
the drive to spin up.
1999-04-07 12:47:27 +00:00
4397d4c1fd
convert tabs to spaces in ascii art circuit diagram
1999-04-07 10:21:31 +00:00
29ddb0a0af
regen
1999-04-07 08:21:42 +00:00
7fdc304a14
Add another USR modem
1999-04-07 08:21:25 +00:00
cadb84965d
Use complete sentences in the generated comments.
1999-04-06 23:03:44 +00:00
17c3351354
Regen.
1999-04-06 23:02:31 +00:00
31f94ae97e
Add Leopard 56k PnP, from PR 7330.
1999-04-06 23:02:09 +00:00
c40eb1cd97
Fix a pasto in copyright text which has been procreating like rabbits..
1999-04-06 20:09:18 +00:00
2198b984e8
Kill an extra 'pciide0: ' in a printf
1999-04-06 17:49:14 +00:00
7a304dfe1b
If scsipi_command() fails, always print out the error code.
1999-04-05 19:19:34 +00:00
bf88fc82eb
Adjust timeout for 'ielem' to match the comment: 5 mn (not 5s) per element +
...
10mn initial.
1999-04-04 12:20:48 +00:00
2b311c7218
roll internal revs
1999-04-04 02:29:51 +00:00
a529f8f3b4
firmware revision now a triple
1999-04-04 02:29:34 +00:00
cd0cf2b5ca
Make firmware revision a triple. Clean up some FC init stuff for
...
board versions with no BIOS. Separate mailbox interrupts from
IOCB interrupts. Read OUTMAILBOX5 while RISC_INT is active- not
after you clear it (potential race condition). Clear out older broken
BIG_ENDIAN goop. Don't negotiate narrow/async for LVD busses at startup
if already in LVD mode. Note usage of presumptive 1040C revision. For
all the LIP, PDB Changed, Loop UP/DOWN async events, mark fw state
as unknown as well as marking the need to do a getpdb on targets- after
a LIP for certain the f/w has to do PRLI/PLOGI for all targets again
and marking f/w state as unknown gives us a fighting chance to (start
to) hold up for that to complete.
1999-04-04 02:28:53 +00:00
0fc69df287
Remove incorrect BIG_ENDIAN defines and substitute in the SBus only macros
...
that will SBusify an isp header or the lun/target portions of a request IOCB-
and have these only valid iff __sparc__ (no non-sparc SBus machine that *I*
know about).
1999-04-04 01:32:44 +00:00
b7406cc163
Change f/w revision to major,minor,micro version. Add in ISP1040C definition.
1999-04-04 01:27:06 +00:00
e6a460c3f3
roll ISP1040 and ISP2100 f/w to latest release
1999-04-04 01:21:02 +00:00
eebeea5b23
Read the board revision and trim cache line size back from 16 to 1
...
for early revision 2100 boards. Make sure to turn ROM off for these
boards.
1999-04-04 01:14:58 +00:00
285bee1d61
Regen.
1999-04-03 19:03:02 +00:00
2198f62dd1
Add Visiion camera and Macally mouse.
1999-04-03 19:01:57 +00:00
28903948b1
Add legacy support register.
1999-04-03 19:01:20 +00:00
946efa06b3
Improve debug output a little.
1999-04-03 19:00:43 +00:00
7793bb6998
Generate grammatically correct sentences.
1999-04-03 18:59:51 +00:00
ecbea6c6a0
More things to do.
1999-04-03 18:58:52 +00:00
9737cf763a
Fix a problem where no Tx Empty interrupt ever happened if CTS
...
was deasserted and we wanted to change parameters to -crtscts
This effectively stalled the transmitter since with TS_BUSY set
we only change parameters during the Tx interrupt handler.
1999-04-03 13:13:19 +00:00
65235b4248
Regen.
1999-04-03 11:57:02 +00:00
75fd6f5433
Add Microsoft Natural Keyboard.
1999-04-03 11:56:39 +00:00
b43b844f6f
- change the interrupt routines to take a 3rd arguments, set to 1 if we
...
are called from the interrupt or timeout handler, 0 otherwise.
- use this to know if we can busy-wait for wait_for_unbusy or wait_for_ready
This fixes a bug where CDs withot the DRQ_INTR capability would not busy-wait
for the CMDOUT phase.
While I'm there change 2 delay() to DELAY() for consistency, and
garbage-collect some old code from wdcintr() which has been ifdef'd out
for some time now.
1999-04-01 21:46:28 +00:00
3f80ba486e
don't allow /dev/random to be opened (return ENXIO) until there is at least
...
one active entropy source
1999-04-01 19:07:40 +00:00
500edb5379
Fix typo. (From PR 7027)
1999-04-01 14:55:25 +00:00
00a4d0521a
use defopted WSCONS_SUPPORT_PCVTFONTS, refuse to load pcvt fonts if this
...
option is not given, suppress complaints in non-debug case
1999-04-01 11:52:42 +00:00
4f0acde07b
defopt WSCONS_SUPPORT_PCVTFONTS
1999-04-01 11:50:02 +00:00
4384fd5134
Fix big-endian support.
...
TULIP_BUSMODE_BIGENDIAN does bswap packet buffers also, so we should use
TULIP_BUSMODE_DESC_BIGENDIAN on big-endian machines. (PR 7027)
XXX 21040 doesn't have this bit, but supporting only 21041+ is better than
nothing.
1999-04-01 11:02:20 +00:00
833fb0ac7f
back date this file to version 1.155 which works on the shark.
1999-03-31 12:44:04 +00:00
bb47e5aecf
Increase some DELAY(), this seems required on some hardware (I'm not sure if
...
the hardware is at fault, or if DELAY(1) waits for less than 1us).
Improve debuging messages for wdcreset_wait().
1999-03-31 11:18:31 +00:00
2f91607aff
Enable this is a non-entropy rnd source.
1999-03-30 21:02:41 +00:00
ae7f25d8af
Fix a typo.
1999-03-30 20:07:56 +00:00
ca5dd9fee7
The AD1848/CS4231 attachment doesn't create DMA maps any more, so we have to
...
do it here. This is preferrable anyway, since we're not actually doing DMA
through the AD/CS chip.
1999-03-30 16:40:47 +00:00
d5a261206d
Replace the #ifdef'ed variable DELAYs with a pair of non-ifdefed
...
DELAY(1)'s. This should fix interrupt driven lpt driver hang and
reboot problems for the group of users who have experienced them, and
shouldn't hurt anyone else.
1999-03-29 21:50:06 +00:00
c45bee7307
Regen.
1999-03-29 21:36:00 +00:00
05eae31620
Now that he ESS 1868 and 1869 are working, enable them here.
1999-03-29 21:35:19 +00:00
401d03761f
Initialize automatics in stp4020print(); noticed by Jonathan O'Brien.
1999-03-29 21:30:48 +00:00
20d6f6afe6
Regen.
1999-03-29 17:24:33 +00:00
8333badc92
Add Epson printer cable.
1999-03-29 17:23:45 +00:00
f487bc59aa
Nuke bogus extra variable, too.
1999-03-29 13:40:41 +00:00
85ad0d175c
Fix bogons in previous change:
...
* The fact that IIR_NOPEND was not set on entry does *not* mean that no
transmission was in progress. Besides, we don't want to throw away receive
interrupts either.
* In the !clearirq case, we didn't splx().
1999-03-29 13:21:15 +00:00
5ecfcfbb96
Make `sun4m DMA not supported yet' message print only for this device,
...
rather than every sbus device probed.
1999-03-29 12:04:43 +00:00
d58a5af79d
Fix multicast hashing function. PR 7274, from Izumi Tsutsui
1999-03-29 11:11:34 +00:00
6a228da053
Mods to com_common_putc(). When doing kprintf() or kgdb output:
...
1. don't clear the irq unless it was clear before transmitting
2. also do various bus_space_barrier() ops
Stops console from freezing when kprintf interrupts tty driver output.
1999-03-29 10:01:39 +00:00
ad69d389ab
Remove the hack to attach devices responding with ATA signatures as atapi if
...
IDENTIFY said so: it doesn't help for the drive this was supposed helping,
and seems to break another device.
In interrupt routine, don't return 0 if we are polling: this should fix the
"panic: wdc_exec_command: polled command not done" some people reported
(kern/7269).
1999-03-29 08:32:02 +00:00
ed7699b360
- Unnecessary to have '#include <machine/autoconf.h>' for those.
1999-03-29 07:22:02 +00:00
4f36436461
add fields for bus_apace tag and handle to ioasic_softc
1999-03-28 17:47:28 +00:00
777c326ff7
Make it possible to force 16 mode via "flags 4" in kernel configuration.
...
Patch supplied by Martin Husemann on "current-users", fixes PR kern/5673.
1999-03-28 12:51:49 +00:00
1663f7072b
remove a diagnostic panic in the keyboard autorepeat timeout() handler.
...
There is a rece condition which might trigger this but is harmless
otherwise. Leave the handler silently instead.
1999-03-27 11:22:23 +00:00
14de6c2418
Cleanup shutdown code - garbage collect (now) unused shutdownhooks() stuff.
1999-03-27 01:26:37 +00:00
df93e67c02
PPS support. Copied off of com.c support, with changes as DCD interupts
...
are only enabled if needed and if ok'd by MD layer.
1999-03-27 01:22:36 +00:00
e50460f5fa
Oops- if you enable 1080 support, remember to load the f/w
1999-03-27 01:08:59 +00:00
9d326d488b
defopt RCONS_2BPP and RCONS_16BPP
...
add support for 16bpp framebuffers as found on color nexten.
1999-03-27 00:07:58 +00:00
d8aa229a12
roll internal release tag
1999-03-26 22:45:17 +00:00
99d46bf762
add isp1080 support and some basic PDB change stuff
1999-03-26 22:39:44 +00:00
068cafa92a
In a PC keyboard doesn't accept a "set to scanset 2" command, reset it
...
and ignore the error. Scanset 2 should be the default after reset, so
this allows some broken keyboards to work. (Reset is needed because at
least 1 keyboard locks up if the "set scanset" is attempted.)
1999-03-26 12:39:13 +00:00
3cafeadabd
Add support for the PTI SBS430. It's a FAS200 type chip- it's a bit funky
...
in that the registers aren't spread by a longword like all the other SBus/ESP
cards. Otherwise it's much the same. It'll make Brad Salai happy.
1999-03-26 06:48:40 +00:00
34f3cd7ce9
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves.
1999-03-25 23:20:22 +00:00
88d8a91205
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves. Fix a bug where packets wouldn't be padded to the correct
minimum length.
1999-03-25 23:19:59 +00:00
9caa955278
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves. Subtract ETHER_CRC_LEN as necessary to get the same values
for these constants as were previously defined locally.
1999-03-25 23:19:16 +00:00
ad22c1dd58
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves.
1999-03-25 23:16:37 +00:00
d3fb0e2ad5
roll internal tag level
1999-03-25 19:41:47 +00:00
1ff88ee466
Avoid busy-waiting when possible if we are not polling (real IRQ or timeout
...
callback). Shared PCI IRQ should now work (but still untested).
1999-03-25 16:17:36 +00:00
augustss