c1cc14fa25
Combine set_encoding and set_precision into a single set_format interface.
1997-03-20 06:48:48 +00:00
de69173e77
Fix oversights in previous.
1997-03-20 03:56:11 +00:00
a283cb636c
Check for errors returned by AD1848 routines.
1997-03-19 19:54:44 +00:00
2b72395bfc
ad1848_commit_settings(): Don't set the speed/format register if the
...
parameters haven't changed. From PR 3360, by Jason Baker.
Also, clean up several overly-complex interfaces.
1997-03-19 19:31:15 +00:00
eb7e30aa3d
normalize off-by-four ad1848 register offsets.
...
also silence probe unless debugging is enabled.
1997-03-19 06:47:37 +00:00
80a8a81608
normalize off-by-four ad1848 register offsets.
1997-03-19 06:45:21 +00:00
1d987a161b
#include <net/if_media.h>
1997-03-17 03:17:34 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
8147d1718f
fix various AD1848/PSS misfeatures; from Jason Baker in PR kern/2045.
...
also did some misc cleanup of my own.
1997-03-13 08:34:49 +00:00
ac3b8b13b7
Don't share the silence block between devices. Make silence filling work for
...
more encodings, and make it device-independent. From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
d9b86972c1
SB minor version number is always two digits
1997-03-12 07:06:19 +00:00
1186720517
eliminate leftover header from bt -> bha conversion; noted by Enami
...
Tsusgutomo in PR kern/3310.
1997-03-11 04:24:03 +00:00
700cbbae46
Fix bug introduced in the conversion to bus_*(). Don't always say that
...
we are a JASS16. From enami tsugutomo.
1997-03-03 21:40:01 +00:00
c7cec27edf
Move if_ep media-sense code from front ends to inside back end,
...
to prepare for if_media, and to support EISA 3c59x cards:
* change epconfig() to take a short that encodes the chipset
type (3c509, or Demon/Vortex/Boomerang).
* add distinct 3c509 and Demon/Vortex/Boomerang media-sense
functions to back end.
* Add EISA match/attach support for the 3c592 and 3c597
(Demon) cards as well as the 3c509-comatibl EISA 3c509/3c579.
* Assume that ISA and ISA PnP cards are 3c509-style, until
proof to the contrary (e.g. large packet support).
Tested on 3c595, 3c590, and 3c509b. Not tested on 3c515 or Demon.
1997-02-18 10:51:06 +00:00
2953a0ce90
Pass the i/o handle, not bus PA, to bus_space_unmap().
...
From Matthias Drochner <drochner@zelz28.zel.kfa-juelich.de>,
in PR #3216 .
1997-02-12 23:37:38 +00:00
dfa1224fab
Oops, pass the memory handle, not bus PA, to bus_space_unmap().
...
From Matthias Drochner <drochner@zelz28.zel.kfa-juelich.de>, in
PR #3216 .
1997-02-12 23:36:04 +00:00
1dd1504980
Move the aha ISA probe functions into a separate file.
1997-02-07 17:37:27 +00:00
f89ffa1fe4
don't clobber IER in cominit(). (suggested by mycroft.)
1997-01-30 19:42:33 +00:00
3573080902
split isasearch (!__BROKEN_INDIRECT_CONFIG) completely off of
...
isascan (__BROKEN_INDIRECT_CONFIG), and attempt multiple match/attach
of cloning devices in isasearch(). (If a match/attach succeeds for
a cloning device, try it again.)
1997-01-26 03:49:28 +00:00
8852c180ef
Fixes to wd driver from cgd -- corrects several nasty bugs typically
...
associated with coming out of suspends/sleeps on laptops.
Approved by fvdl.
1997-01-17 20:45:29 +00:00
e6717c0bc9
- convert to bus_space_*
...
- split attachment code to sb_isa.c
1997-01-16 21:03:30 +00:00
fe9f1f4e3e
add missing copyright and RCS ID; ok'd by mycroft
1997-01-15 07:06:42 +00:00
be33336052
If attaching the console, reinitialize it immediately.
1996-12-14 10:46:38 +00:00
58e4442168
Turn off the baud rate changing optimization.
1996-12-14 08:56:23 +00:00
d502e68402
Fill in sc_link.max_target
1996-12-10 21:27:16 +00:00
74187419b6
The last change fixed a last-minute goof in the __BROKEN_INDIRECT_CONFIG
...
case, but added a typo (extra parenthesis) in the !__BROKEN_INDIRECT_CONFIG
case. fix it.
1996-12-08 00:14:03 +00:00
243ef518d2
fix a (fatal) bug in the __BROKEN_INDIRECT_CONFIG changes checked
...
in yesterday. (got a little bit careless with #ifdef'd variables.)
1996-12-05 22:16:04 +00:00
179a058e17
fix AUTO_CAL_ENABLE bug, & misc. cleanup.
1996-12-05 07:01:30 +00:00
94909aee07
return proper output port. Fixes PR kern/2014.
1996-12-05 06:48:47 +00:00
3ec2c5af68
Duh, make sure i/o tags and handles are initialized before actually
...
probing for the LANCE chip.
1996-12-05 02:39:37 +00:00
197d80c63a
update these so they compile whether or not __BROKEN_INDIRECT_CONFIG
...
is defined.
1996-12-05 01:25:23 +00:00
c164cadf68
Convert to use <machine/bus.h>
1996-12-02 05:44:17 +00:00
3b4e2a1ac9
In wdattach(), when printing out info about the drive, make the output
...
look a little more like a SCSI disk's. This has the pleasant side-effect
of preventing the output from annoyingly extending past 80 columns.
1996-11-27 10:50:39 +00:00
d7c58f547e
Drop LPT_NPORTS to 4 from 8. Some lpt units require only 4 I/O ports
...
(e.g. from 0x3bc to 0x3bf, for example). Others may require more,
but until there's some special handling for them, 4 should be returned
so that on systems with I/O port accounting, the unit at 0x3bf can be
properly mapped, etc. (OK'd by mycroft.)
1996-11-23 23:22:50 +00:00
452ba6e098
restrict the FSTATE_STAR prohibition (and panic) to the i386 only. Cloning
...
devices actually do make sense on indirect-config busses, because you
might be able to have more than one of the busses! In addition, they're
useful because they don't require unit numbers to be wired down, so you
could e.g. have vga* at indirect? and vga* at direct?, and have the first
one found be unit number zero. Finally, devices which can divine their
own ports numbers, etc., actually should be cloning, even if you know you'll
only have one bus that they can live on.
1996-11-23 21:36:44 +00:00
bcc644fd7e
Add missing arguments to NIC_GET in debug code. Fixes kern/2875.
1996-11-17 04:11:18 +00:00
40bd2b1104
Fix front-ends of split uha driver to compile when DDB is not configured:
...
Propagate Debugger() macro from uha.c to uha_{eisa,isa}.c.
update file names accordingly.
1996-11-15 22:53:36 +00:00
b005a8ee10
move cominit() prototype to comvar.h, so that ports which use 'com'
...
for serial console, but don't use the (i386-specific)
comcninit()/comcnprobe() functions, can do the right thing.
1996-11-13 19:41:35 +00:00
457c188626
Use device struct from sbdsp_softc, eliminate redundant softc members.
...
Fixes PR kern/2237.
1996-11-12 07:39:56 +00:00
af29f79ed4
Fix WDDEBUG code; PR kern/1480.
1996-11-07 05:23:07 +00:00
53945ccb19
Eliminate unsolicited spewage; PR #2108 .
1996-11-05 07:20:32 +00:00
697941357c
Eliminate unsolicited spewage; PR #2108 .
1996-11-05 07:17:23 +00:00
24620e1cd0
Rearrange wds_attach() to initialize DMA channel before setting to cascade
...
mode.
Fix silly error in -ASC case, pointed out by Niklas Hallqvist.
1996-11-03 16:20:31 +00:00
f577ebda70
Move 'not finished' printf within AUDIO_DEBUG ifdefs, it should normally
...
be silent about this and caused confusion with stray interrupts.
1996-10-25 07:25:48 +00:00
233251d896
add missing argument to bus_space_map in ESP code
1996-10-22 00:45:25 +00:00
769a499800
New bus.h implementation/interface:
...
- No more distinction between i/o-mapped and memory-mapped
devices. It's all "bus space" now, and space tags
differentiate the space with finer grain than the
bus chipset tag.
- Add memory barrier methods.
- Implement space alloc/free methods.
- Implement region read/write methods (like memcpy to/from
bus space).
This interface provides a better abstraction for dealing with
machine-independent chipset drivers.
1996-10-21 22:34:38 +00:00
0211a3232d
Appease the compiler: get rid of some unused variables, add some
...
prototypes, and suppress a bogus "might be used uninitialized" warning.
It's clear from reading the logic of the function that produces the
warning that the variable will not be used uninitialized, but the
compiler just isn't smart enough, I guess. Marked XXX for future reference.
1996-10-17 04:34:08 +00:00
35b8c6aa4c
Add some prototypes, clean up some unused variables, and misc. other
...
compiler warning cleanup.
1996-10-17 04:21:55 +00:00
bfe653fbd7
fix PR 2851: make it compile under -Wformat
1996-10-16 11:32:45 +00:00
aa8449a9ef
fix compile errors & warnings
1996-10-16 01:12:18 +00:00
86373f8cf9
backout kprintf changes
1996-10-13 01:37:04 +00:00
58953408cb
printf -> kprintf, sprintf -> ksprintf
1996-10-10 22:04:48 +00:00
e51a0f737a
- printf -> kprintf, sprintf -> ksprintf
...
- fix unused variable warning
- include <systm.h>
1996-10-10 21:27:25 +00:00
ce31bd3eb6
- printf -> kprintf, sprintf -> ksprintf
...
- Remove unused variable
- include <systm.h>
1996-10-10 21:26:04 +00:00
18f1d603f0
- printf to kprintf, sprintf -> ksprintf
1996-10-10 21:25:07 +00:00
764db9b35b
- printf -> kprintf, sprintf -> ksprintf
...
- provide a default case to handle an unknown model number.
- include <systm.h>
- remove unused variable.
1996-10-10 21:23:28 +00:00
245e10b406
- printf -> kprintf, sprintf -> ksprintf
...
- ifdef an unused variable.
1996-10-10 21:21:52 +00:00
ee2c8600ee
- printf -> kprintf, sprintf -> ksprintf
...
- remove kvtop declaration.
1996-10-10 20:04:03 +00:00
b10785c0e4
fix "control reaches end of non-void function" in check_eh() for -Werror.
1996-10-06 21:24:36 +00:00
767522373b
If we get a RXRDY interrupt, but RXRDY is not set in the LSR, briefly set IER
...
to 0. This fixes a condition where some UARTs send an infinite stream of
RXRDY interrupts.
1996-10-06 01:52:26 +00:00
d1f08e3e87
Serial console changes:
...
* Enable FIFO with trigger level 1.
* Set DTR and RTS so terminals are happy.
1996-10-06 01:46:04 +00:00
870052156e
Better error message when the card is found but shared memory isn't enabled
1996-10-04 01:28:54 +00:00
e1b380e139
Fix a bus mem space leak; always unmap the card, regardless of the success
...
of cy_find().
1996-09-26 19:24:04 +00:00
63b18ee2f2
This file is now obsolete.
1996-09-25 20:44:09 +00:00
5d34f1a62b
New cyclades driver from Timo Rossi
1996-09-24 17:45:14 +00:00
67417a473a
Use bus.h.
1996-09-07 12:12:18 +00:00
94bfaac456
Wrap the definitions of CONADDR and CONUNIT in #ifndef.
1996-09-06 05:06:01 +00:00
82f0b829e8
compoll() -> comsoft()
1996-09-05 16:42:32 +00:00
8427290044
wtpoll() -> wtsoft()
1996-09-05 15:37:18 +00:00
110ee78a6f
Remove cyselect().
1996-09-05 15:35:09 +00:00
b3eac79b64
tty stop functions really should return void, not int, and certainly not both.
1996-09-02 06:43:16 +00:00
70944d2e2c
Minor changes.
1996-09-01 00:20:20 +00:00
e8b5bd5b35
Update.
1996-09-01 00:10:55 +00:00
44bb2d98e1
Split the UltraStor driver apart.
1996-08-31 20:26:48 +00:00
06fdef11fd
Split the BusLogic driver apart, and rename it to `bha (like BSDi).
1996-08-31 20:18:24 +00:00
164af20154
Add a missing "int" in a function declaration.
1996-08-30 01:40:35 +00:00
71ad30d0e9
(1) set scsi_link channel to either the appropriate channel (if a
...
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
1996-08-28 18:59:15 +00:00
2a73ef60b7
change cfprint_t type definition to take a const char *, rather than
...
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
1996-08-27 21:53:46 +00:00
eea135a8b9
Two changes:
...
- Convert to use <machine/bus.h>.
- Also read station address in egattach(). The softc is no
longer required in the probe function.
1996-08-03 19:33:19 +00:00
a47a8c3f8c
Oops, missed a couple of inb()s..
1996-08-03 02:23:57 +00:00
c937985d60
Convert to use <machine/bus.h>, plus 2 bug fixes:
...
- In egstart(), if the Send Packet command fails, m_freem()
the mbuf chain before dequeueing another one (memory leak).
- In egintr(), return 1 if a known interrupt was processed.
Would manifest itself as spurious interrupts.
1996-08-03 02:12:46 +00:00
003947b965
Changed the driver to use bus_xxx().
1996-07-25 18:59:12 +00:00
bc2f07f331
move DDB-only label inside an #ifdef, so that -Wall works
1996-07-10 18:14:04 +00:00
794614df64
In the 3c503 probe, map the correct number of ports. (Unmap already
...
unmapped the correct number of ports, thus causing the ISA io port
extent map to get corrupted.)
1996-06-25 20:47:02 +00:00
a8e5b5ba47
Remove some unneeded FIFO flushes and reorder some register changes per the
...
6360 manual. Turn off synchronous negotiation.
1996-06-18 16:13:05 +00:00
202bd8b9ae
Turn off *DIAG by default.
1996-06-18 12:55:00 +00:00
08d585e924
add tty_attach() where appropriate.
1996-05-30 18:24:09 +00:00
4e8dbf468a
Added flags to the iy driver to override the media autodetect mechanism, if
...
necessary. Added a manpage to document the flags.
1996-05-22 15:39:43 +00:00
19b0b9502f
New version, with changes from Justin Gibbs and Noriyuki Soda.
1996-05-16 03:44:13 +00:00
52e2ab70b0
#include <machine/intr.h> to get IST_* definitions.
1996-05-14 00:31:04 +00:00
cec36bf8d5
Use intr.h.
1996-05-12 23:51:23 +00:00
f004654691
Update Herb's e-mail address; beer.org feels a lot more friendly.
1996-05-10 05:27:53 +00:00
e32158478e
Correct a couple of comments ... port 0x84 produces a 1.25us delay when
...
read, not 2.5us. (I must have been confused; thanks Charles, for
correcting me.)
1996-05-08 23:32:31 +00:00
1040e97175
If accessing shared memory on a 16-bit card, be careful not to do any
...
8-bit memory access; some cards, notably some WD/SMC cards, can't handle
8-bit access if 16-bit access has been enabled.
1996-05-08 22:09:18 +00:00
817e0b8d97
Fix a typo.
1996-05-08 17:29:40 +00:00
15354e899c
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_reset)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:55:13 +00:00
7b3f25271d
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Break up ISA LANCE driver into ISA and PCI front-ends.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:50:04 +00:00
95f41d24cc
Add "iy" driver for Ethernet ISA boards using the Intel i82595 chip, e.g.
...
(and only tested on) Intel Etherexpress PRO. Should work on any i82595 ISA
board which uses an EEPROM for config information; NETBLKID not yet supported.
TODO: change to BUS interface, add multicast support.
1996-05-06 21:36:51 +00:00
d53d6cd545
Move comintr() prototype to comvar.h; needed by the multi-port cards.
1996-05-05 19:50:44 +00:00
d21e608c6b
Make those compile again; they were missing a declaration for bc.
...
Also fix prototypes.
1996-05-05 19:49:51 +00:00
0bc154b367
Fix a bug I introduced when converting the driver to <machine/bus.h>.
...
Use the i/o handle for the `delay port' exported from the parent
ISA bus, rather than the totally bogus combination of [ioh, 0x84].
Also, fix a bug apparently introduced when the -Wall changes were checked
in which, under most circumstances, would cause a 16-bit WD8013EP to
be mis-identified as an 8-bit WD8003EP.
1996-05-05 01:28:52 +00:00
6fb58044fd
Map port 0x84 (which is used to generate a 2.6us delay) in isaattach().
...
Since this port is needed by at least a few drivers, export its i/o handle
via isa_attach_args.
1996-05-05 01:14:07 +00:00
0808320ac1
Fix a trivial typo.
1996-05-05 00:40:01 +00:00
0817b1b518
make it work with GUSPLAYDEBUG defined
1996-05-03 22:35:24 +00:00
1a7708a2a2
- Fix random return value in the probe function.
...
- Add <sys/systm.h> to get prototypes
1996-05-03 19:06:25 +00:00
c3c1caa12a
Remove unused err label; simplify the code in ed_probe_Novell
1996-05-03 19:05:30 +00:00
05dbb85594
cleanup the memh mess:
...
- remove it from the Novell probe.
- cleanup the 3com probe.
1996-05-03 17:29:29 +00:00
9d91d0f742
Convert the Etherlink III (ep) driver to use <machine/bus.h>.
...
For the ISA probe, implement a way to keep track of which ISA busses
have been through an ep_isa probe; the static variable that was used
before didn't scale.
1996-04-30 22:27:58 +00:00
d614ab5859
Update the 3c507 probe to the new interfaces used by elink_reset()
...
and elink_idseq().
XXX This is just a kludge until the entire driver is converted to use
<machine/bus.h>
1996-04-30 22:21:54 +00:00
91b4a6d401
Adapt the elink_reset() and elink_idseq() routines for <machine/bus.h>.
...
In elink_reset(), since some machines may have more than one ISA bus,
implement a way of keeping track of which ISA bus has received an
elink_reset(); The static variable which was used previously didn't
scale.
1996-04-30 22:16:27 +00:00
a1609dc859
- Fix gcc -Wall warnings
...
- BUG: if (error = ...() == EWOULDBLOCK)
1996-04-29 20:30:48 +00:00
1c86bef3bc
Fix gcc -Wall warnings.
1996-04-29 20:28:40 +00:00
e8a8a6298c
- prototype fixes
1996-04-29 20:02:32 +00:00
d0987b1ee9
- prototype fixes
...
- BUG: changed:
val &= CD_POL_MASK;
val | CD_POL_BIT; /* XXX if (pol) */
to:
val &= CD_POL_MASK;
val |= CD_POL_BIT; /* XXX if (pol) */
1996-04-29 20:00:39 +00:00
27292adc4c
- gcc -Wall fixes
1996-04-29 19:50:47 +00:00
c32e566f6c
- missing argument in printf
...
- gcc -Wall fixes
1996-04-29 19:48:26 +00:00
f1dd12ed4e
Prototype fixes
1996-04-29 19:45:32 +00:00
07beed1117
Fix an obvious typo (wrong sign of test). At the same time, make the early
...
probe printf prefix unambiguous.
1996-04-25 18:54:45 +00:00
aff40e2a72
Break up the ep driver into isa, eisa, and pci front-ends and a
...
bus-independent core driver. Tested on all three bus types, including
an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in
your kernel config file to catch this one).
XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 02:15:42 +00:00
b57c554d06
Add a hardware dependent initialization function lehwinit()
1996-04-22 02:53:28 +00:00
d7b610dca6
Fix 3c590 to use the new pci interface; the pci compat code changes were
...
slightly biffed.
1996-04-19 00:01:19 +00:00
d7d306aeb7
change LANCE copy & zero functions' names to start with amd7990_, and
...
remove their 'integrate' (usually defined to be 'static') keywords.
when lance drivers are split up by attachment, more than one file will
reference the copy/zero functions (i.e. not just the file that pulls in
am7990.c... and eventually inclusion of am7990.c should go away entirely).
1996-04-18 00:25:11 +00:00
a610e9d471
include <sys/termios.h> to make comvar.h happy
1996-04-15 18:55:23 +00:00
b6549d493d
define and export the global variable "comconscflag", the default tty
...
'cflag' for the console. Normally set to TTYDEF_CFLAG, may be
overridden by machine-dependent console attachment code, as necessary.
(Alpha uses it to set cs8 -parenb.) Files including comvar.h now
need to include <sys/termios.h>, because comconscflag is of type
tcflag_t.
1996-04-15 18:54:31 +00:00
51e85d07b9
update for addition of a machine-dependent cookie as the first argument
...
to isa_intr_{,dis}establish().
1996-04-11 22:27:59 +00:00
e6456e7285
on non-i386 systems, include <machine/intr.h> (per charles's proposal on
...
tech-kern (?)), to get the IPL_* and IST_* types. pass the machine-dependent
cookie given at attach time on to sub-devices, so they can use it to access
the interrupt functions properly.
1996-04-11 22:25:44 +00:00
a391172983
include a machine-specific header from ARCH/isa/isa_machdep.h, to define
...
the isa_chipset_tag_t type, and to define or prototype:
isa_attach_hook()
isa_intr_establish()
isa_intr_disestablish()
i.e. the machine-dependent functions to be used my MI ISA code.
Remove prototypes for the latter two functions from this file.
1996-04-11 22:20:50 +00:00
789a455ab4
if no DDB, define Debugger() to be a panic.
1996-04-10 23:01:13 +00:00
0609135a66
Add explicit return types.
1996-04-10 19:03:46 +00:00
43411d2e96
Convert to use <machine/bus.h>.
1996-04-09 00:46:15 +00:00
740637ad71
If we dequeue a packet due to excessive collisions, make sure we check
...
to see if the queue length has dropped to 0.
1996-04-08 19:02:19 +00:00
402f77d443
remove tricky open-coded variants of config_found(), by using the
...
child device pointer now returned by config_found(). (previously,
the code played games to get that pointer; now they are unnecesary.)
1996-04-04 07:08:10 +00:00
9c6e05d835
Minor optimization, and do a CLRCH after (re)selection just to be safe.
1996-04-03 15:58:13 +00:00
b82447e3e1
* Change message priorities so that ABORT comes after IDENTIFY.
...
* Add an ACB_RESET flag, so that a BUS DEVICE RESET can be queued within the
driver.
* If ACB_ABORT or ACB_RESET is set during reselection, schedule a message and
assert ATN.
* Optimize aic_datain_pio(), aic_dataout_pio() and aicintr() somewhat.
* Schedule a timeout only when we select the target, so that commands can't
time out prematurely.
1996-04-03 10:33:45 +00:00
70f35ac052
Don't wait for a command complete interrupt when enabling mailbox out
...
interrupts.
1996-04-03 09:45:45 +00:00
f0d8cbb1cb
Don't wait for the host adapter to be idle before enabling or disabling
...
mailbox out interrupts.
1996-04-03 08:48:46 +00:00
d0742ed3c5
Several things:
...
1) If we get an unexpected disconnect, issue a REQUEST SENSE, as recommended
by the SCSI-2 spec. If the target created a contingent allegiance condition,
this will clear it. Also, if it happened while sending a SDTR or WDTR message,
disable negotiation for that target.
2) Since some lame devices still don't deal correctly, make sure we deassert
ATN if our last message out is interrupted. If we get a MESSAGE PARITY ERROR,
we'll reassert ATN anyway. This should ensure that we never have to send a
MESSAGE NO OPERATION.
3) Set AIC_ABORTING only when actually sending a BUS DEVICE RESET or ABORT,
so we get better error detection.
4) Other internal reorganization of no consequence.
1996-04-01 07:24:37 +00:00
55960650f7
add include file for function prototypes
1996-03-31 22:50:11 +00:00
004f5e8d39
Fix a slight biff with 16-bit DMA in last change.
1996-03-31 20:51:43 +00:00
778f21db6a
Use `{in.out}b(iobase + ...' rather than including the base address in
...
the register definitions.
1996-03-30 16:13:24 +00:00
72f4fb5692
Fix return type of wds_sense().
1996-03-30 07:40:11 +00:00
78681855e4
This version is deprecated.
1996-03-30 05:36:32 +00:00
59e1daefcd
Working WD7000 and TMC-7000 driver, from Julian Highfield, with additional work by me.
...
Needs some refinement, but it works.
1996-03-29 20:53:30 +00:00
44baed59ef
Fix the mailbox unlock code for CF and CP.
1996-03-28 18:19:05 +00:00
dbdbd735b8
Update these (as minimally as possible) to work with new PCI interfaces:
...
(1) make pci functions take as an argument a machine-dependent
cookie, to allow more flexibility in implementation.
(use of other PCI functions, etc., left unchanged.)
1996-03-27 04:03:05 +00:00
8d60d04ffa
Remove dead variables.
1996-03-25 07:11:12 +00:00
3ab38e9ad4
Display the right sync period for fast devices.
1996-03-25 00:18:09 +00:00
dac7f9a885
Fix up a couple of printf()s.
1996-03-24 22:23:56 +00:00
e2f1ed6ef2
Various, including:
...
* Display as much revision info as we can get.
* Fix a race condition that could cause interrupts to be lost.
* Handle `out of mailbox' conditions (much) more gracefully.
* Schedule timeouts more safely.
* Add diagnostic code to (correctly) detect if a CCB times out before its
outgoing mailbox is emptied.
1996-03-24 22:20:41 +00:00
78de5226a1
lto3b -> _lto3b
1996-03-19 03:28:45 +00:00
b55176ea0c
since this driver tries to block its interrupt with spltty(), it must
...
attach that interrupt with IPL_TTY.
1996-03-18 09:14:32 +00:00
b5c1728e22
clean up <machine/bus.h> changes a bit; no real functional change.
...
prototype lpt_port_test().
1996-03-17 13:40:29 +00:00
179f65d15e
Add #ifdef's at the right places, on NCOM_ISA and NCOM_COMMULTI, to
...
only include the relevant code in the probe & attach functions. Still
one probe and one attach function, with #ifdefs, but this is a step
in the right direction and saves a few hundred bytes (ooh, ahh!).
1996-03-17 13:38:14 +00:00
94907fa254
adjust to deal with expression support for optional file specs
1996-03-17 13:21:09 +00:00
9d4db41a9f
change the name of com's attachment to commulti, and provide flags
...
for that and the isa attachment in com.h (in addition to the flag for
the presence of 'com' itself).
1996-03-17 07:30:25 +00:00
de7c200585
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 00:53:54 +00:00
6d9ea4cf59
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 00:43:52 +00:00
9f762df4e4
clean up a comment, delete unnecessary local variable in probe
1996-03-17 00:26:12 +00:00
88b335392c
rename asic_addr and nic_addr to asic_base and nic_base, in softc, as
...
they're base I/O ports, not really addresses. rather than using those
softc fields directly, assign local variables (asicbase, nicbase) to have
their values, and use those. (consistency, plus better optimization
potential in some cases.)
1996-03-16 07:24:15 +00:00
87abc9cdc7
Move contents of edprobe() into ed_find() -- they'll be used by edattach()
...
eventually. rename the probe functions for the various boards to 'find' for
consistency/correctness (but the generic8390 check is still a 'probe').
Add protos for ed_find(), ed_probe_generic8390(), ed_find_WD80x3(),
ed_find_3Com(), and ed_find_Novell(). Fix one minor space nit.
1996-03-16 06:41:20 +00:00
4beac8eab6
convert NIC_GET and NIC_PUT to take NIC base port address, rather than softc.
1996-03-16 06:18:39 +00:00
f3bac4c1fb
print out hardware type, and print firmware version more precisely.
...
Information about structures & commands to do this gleaned from
the FreeBSD bt driver.
1996-03-16 05:33:28 +00:00
c3361cbc2c
prototype bt_cmd(), using varargs/stdarg (ooh, ahh!). Fix up resulting
...
pointer warnings.
1996-03-16 04:37:40 +00:00
8b3873367f
add MediaVision Jazz16 chipset support. It must be configured with
...
'flags 1' on the sb? kernel configuration file line (because it frobs a
noncontiguous IO port to configure the Jazz16 extensions).
Also, remove static sb_device structure and fill in user's buffer on
each request.
1996-03-16 04:00:09 +00:00
76f1f884eb
convert to not assume existence of softc at probe time.
1996-03-16 03:20:25 +00:00
8b404fdede
A foolish consistency... General cleanup: get rid of spaces and tabs at
...
ends of lines, turn aligned blocks of eight spaces into tabs, name all
softc elements with the "sc_" prefix, and call the softc by the commonly
used name, "sc", when passing it around.
1996-03-16 02:54:27 +00:00
6668fa09a3
Change register definitions to be offset from the I/O base, rather than
...
complete I/O addresses. Access ports via "iobase + REGISTER."
1996-03-16 02:02:54 +00:00
2b96f0705b
delete unused cruft (the 'software conventions' chunk).
1996-03-16 02:00:43 +00:00
85286bff2f
convert these to use new <machine/bus.h> interfaces. This involved
...
substantial reworking of the multi-port drivers, as they need to frob
bits in the io-port spaces of their children. As a result, the
commulti->com attachment interface is substantially more complex.
(This may be fixable in the future by making some of the code common,
but as long as io-port allocation checking is planned, it's necessary.)
1996-03-10 09:01:20 +00:00
5bfb840114
Fix copyright year
1996-03-09 23:37:14 +00:00
85288c6a61
Include comvar.h, for comprobe1() prototype and for commulti_attach_args.
...
Remove multiple identical definitions for the arg struct used by multiport
boards' to attach slave com ports.
1996-03-09 01:03:59 +00:00
a7c6dfe1cd
include comvar.h for comprobe1() prototype
1996-03-09 01:02:08 +00:00
56edbfc4f9
define the common structure used to attach 'com' units as slaves to
...
multiport cards. prototype comprobe1(), which is used by multiport card
drivers.
1996-03-09 01:01:33 +00:00
645d83b763
minor cleanup. mostly: use COM_NPORTS and a new (driver-specific) NSLAVES
...
macro where appropriate. No point in hard-coding numbers in multiple places.
At the very least, this makes the drivers slightly easier to diff/understand.
1996-03-09 00:09:04 +00:00
2c11ad408c
convert to use I/O mapping/access macros in <machine/bus.h>.
...
Mostly mechanical changes, except for probe/attach, which have
to map (and, in the case of probe, unmap) the I/O space that the
chip will use.
1996-03-08 22:17:58 +00:00
b1d3f7607c
remember the bus_chipset_tag_t given by our parent, and pass it on to
...
children.
1996-03-08 20:36:21 +00:00
5087096150
pass a bus_chipset_tag_t (defined in <machine/bus.h>) to the bus when
...
attaching, and to the devices when attaching them. #include <machine/bus.h>
to make this backward compatible with old #include requirements.
Also, clean up idempotency so that isa/eisa/pci "var.h" headers are
consistent (make them all idempotent).
1996-03-08 20:25:22 +00:00
acabb62791
the i386 port no longer attaches isa, eisa, and pci at root.
1996-03-04 03:29:12 +00:00
d8026ad9ef
Oops; switched two bits.
1996-03-01 04:35:27 +00:00
f3b29ca5d2
Remove two unneeded `if's.
1996-03-01 04:13:25 +00:00
546ad9e88b
Add support to the ISA DMA framework for auto-initialize mode.
...
Add experimental SB16 code, disabled for now.
1996-03-01 04:08:13 +00:00
3ca5707161
make ISA bus match/attach, and sub-device configuration machine-independent.
1996-02-28 01:43:45 +00:00
4005c5fd09
Fix typo (PR 2123, from Michael VanLoon)
1996-02-26 22:48:32 +00:00
40d57df71a
Switch byte order of ID and configuration registers for 14f and 34f.
1996-02-24 05:27:49 +00:00
3ec5928403
Keep the terminal count information around, as it's self-clearing.
1996-02-22 06:21:48 +00:00
a35f0ac985
Add more debugging code.
1996-02-20 12:13:09 +00:00
947cae817e
Do not allow the gain to be changed on an original SoundBlaster.
1996-02-20 11:48:50 +00:00
015ee926f6
Fix mono volume adjustment.
1996-02-20 11:15:15 +00:00
b5f3c5cbdc
XXX This is a kluge.
...
Check to see if the DMA transfer is finished; if not, don't do interrupt
processing.
1996-02-20 04:19:24 +00:00
4d6412e7bf
Move the terminal count check into a separate function.
1996-02-20 04:17:05 +00:00
cd5249589d
if_ep.c: Recognize 3c595
1996-02-19 20:18:40 +00:00
5021ab87f1
Update copyright notice.
1996-02-19 15:23:25 +00:00
5bc567b0d3
Set IER_ETXRDY before outputting any bytes, to prevent race condition.
1996-02-19 15:09:25 +00:00
c011a5eae4
Handle break more correctly.
...
Make IER_ETXRDY track TS_BUSY. (Prevents a loop in comintr() if no output
is available.)
Add a bunch of debugging code.
1996-02-19 14:53:03 +00:00
760b34026c
Declare a variable...
1996-02-18 22:19:44 +00:00
ba2ac1b587
Clean this up a bit.
1996-02-18 22:17:37 +00:00
47286969ae
Add bass/treble input filter adjustment controls to SB (Pro) driver
1996-02-18 16:36:44 +00:00
e5730c4a73
Fix a race condition where we might stop outputting if a write follows a
...
flush too closely.
1996-02-18 09:10:15 +00:00
203f5d5329
Add some text describing the UART lossage worked around in the previous.
1996-02-17 04:51:41 +00:00
03f1e1432a
fix compile error from gusprobe() cleanup
1996-02-17 04:49:50 +00:00
121f6570d7
Drain the transmitter FIFO before changing the baud rate or FIFO depth
...
registers. Fixes PR 2046.
Also, if COMCONSOLE is defined, expect CONSPEED to be the baud rate.
1996-02-17 04:04:28 +00:00
28feffd508
avoid panic'ing when driver gets confused--just spit out a message and
...
keep going.
Improve error messages to include device name.
use STATIC for function declarations/definitions so it's easier to get a
useful symbol table by flipping a switch.
1996-02-17 03:35:22 +00:00
7847c9efee
Various:
...
* Snap the sample rate when setting it, and remember only the time constant.
* Set the time constant when changing between play/record.
* Always return the actual sample rate with AUDIO_GETINFO.
1996-02-16 10:10:21 +00:00
19f59bf3c2
Prototype the probe and attach functions.
1996-02-16 08:18:32 +00:00
7af4edd731
Various, including:
...
* Add more delays while writing registers.
* Replace sc_dma{in,out}_inprogress with sc_dmadir.
* Eliminate the need for sc_locked.
* Add more DPRINTF()s.
1996-02-16 08:07:40 +00:00
11d31f7ce7
Hayes ESP patches [from PR database]
1996-02-10 20:23:18 +00:00
28bf676a23
Read the 14f/34f registers in 8-bit mode.
1996-02-09 17:38:09 +00:00
54c51d4393
Document this file better, mostly from John Vinopal
...
<banshee@gabriella.resort.com>. Closes PR #1864 .
1996-02-05 23:01:50 +00:00
ae06fdb589
Allow blocksize of NBPG/2 to NBPG for higher sampling rates. From
...
Lennart Augustsson <augustss@cs.chalmers.se>, closes PR 2013.
1996-02-05 21:32:26 +00:00
3ae2aedf4d
Fix error in copyright notice
1996-02-05 02:18:48 +00:00
240e22087c
Received copyright assignment
1996-02-05 00:10:32 +00:00
919f6728ab
Accept DIOCEJECT as a synonym for CDIOCEJECT. Implement DIOCLOCK
...
separately from CDIOCALLOW and CDIOCPREVENT, even though they perform
basically the same function (with a different interface XXX).
1996-01-30 18:28:02 +00:00
02317d25bb
Make the panic message for ISA clone devices more informative.
1996-01-16 07:52:38 +00:00
d3427703db
Hayes ESP support from Michael Van Loon, with minor cleanups. Tested on
...
a single port ESP card; works great!
1996-01-14 23:44:34 +00:00
f08d96426e
Oops. Fix RCS id.
1996-01-13 02:06:30 +00:00
e422ebca1a
Add the "ahe" driver, autoconfiguration support for the aic7xxx-based
...
Adaptec 2[78]4x SCSI controllers, from Michael Graff <explorer@flame.org>.
Fixes PR #1594 from Noriyuki Soda <soda@sra.co.jp> in a different way.
1996-01-13 02:05:14 +00:00
48bb61e0d7
Use WTDBPRINT() instead of DEBUG() for driver debugging printf()s..
...
Fixes PR #1927 , from Erik Bertelsen <erik@arhpc214.uni-c.dk>
1996-01-12 00:54:23 +00:00
5e81dcd27a
Make it a tad more obvious that this is a 3c505 driver.
1996-01-10 18:21:52 +00:00
75caa8c729
Imported from OpenBSD/FreeBSD:
...
Add support for the SMC8416 (EtherEZ) ISA ethernet card.
The 8416 has an 8K shared mem (the old driver assumed 16K
and failed at attach time).
1996-01-10 16:49:22 +00:00
3441f118d5
Make sure we disk_busy() for every transfer we start.
1996-01-08 21:21:56 +00:00
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
b9c37470a0
Fix Ultrastor 24f probe, per Andrew Gillham.
1995-12-26 17:16:55 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
e159767fed
Repeating my mistakes twice... I used sc-> in the pci probe routine
...
again, and it turned NetBSD in ostype[] to N^CtBSD... Thanks Charles (again)
Also call epstop() in the attach routine to make sure that the pci card
gets reset properly.
1995-12-05 03:30:15 +00:00
0cd793449e
merge in changes from 1.1 release branch
1995-11-30 00:56:23 +00:00
0f7f390b49
allow bus-specific lance drivers to use machine-independent buffer/descriptor
...
copy functions, and convert isa and pmax drivers to do so.
1995-11-25 01:23:51 +00:00
d125a07adb
My previous changes broke the pcmcia support. For now assume that all non
...
PCI cards look identical to ISA cards.
1995-11-13 20:50:22 +00:00
e4c4e9cb07
Add support for the 3c59x (pci) cards in the 3c5x9 driver. In addition
...
add the necessary bits for the 3c589 (pcmcia) card without adding any
of the pcmcia framework.
1995-11-10 19:39:21 +00:00
d3c61be30b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 05:01:05 +00:00
38a7c4b007
Correct the format of some diagnostics.
1995-11-10 04:41:58 +00:00
d8f6a1896b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 04:30:36 +00:00
f096f370fb
Use SET(), CLR(), and ISSET() macros.
...
Rename CFCR to LCR, and cache its value.
Check MSR before transmitting, for better flow control.
Preserve LCR_SBREAK inside comparam().
1995-10-15 19:43:04 +00:00
3450507404
Make sure we only schedule one timeout to refill the mbuf queue.
1995-10-10 03:11:28 +00:00
85285f6ead
Add a shutdown hook.
1995-10-07 09:19:13 +00:00
86939fd839
Fix typo.
1995-10-04 00:35:07 +00:00
393a69d6db
Modularize the CCB/MSCP/ACB/ECB handling a little. No functional changes.
1995-10-03 20:58:56 +00:00
a47ab73248
memcmp -> bcmp. Fixes PR #1518 .
1995-09-26 22:56:54 +00:00
26419c5a8b
Don't declare Debugger(). It's handled in <sys/systm.h>
1995-09-26 19:31:15 +00:00
ddbb956f35
fixes a typo, the case where iomem is specified, but iosize is not, and
...
moves a couple of ee16 specific calls into a 'if ee16' protected block.
From Andrew Gillham <gillham@Digitron.COM>
1995-09-26 13:24:48 +00:00
0fbf2ca04a
Make *print() a message if no scsibus was attached. Also, return something
...
valid.
1995-09-14 20:43:09 +00:00
abe82a6680
Etherexpress-16 driver collision by Andrew Gillham <gillham@Digitron.COM>.
1995-09-14 12:41:32 +00:00
8887de9230
opri --> s
1995-08-12 22:58:01 +00:00
240560e9fd
ia_irq has not been a power of 2 for a long time...
1995-08-12 22:37:58 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
e4413d1a10
Fix another comment.
1995-08-07 14:26:51 +00:00
f657f5bf3e
Make this interface simplex. It's more efficient, and sidesteps the
...
problem of receiving our own multicasts in promiscuous mode. Also, fix
some outdated comments.
1995-08-07 14:16:26 +00:00
6567855472
Count collisions and errors better.
1995-08-05 23:53:18 +00:00
82b6eec41c
Use an intermediate variable to shorten label initialization code.
...
Make wddump() work on more machines.
1995-08-05 23:50:23 +00:00
24a5e56396
Use an intermediate variable to shorten label initialization code.
1995-08-05 23:47:52 +00:00
60d2d483ca
Turn off the mbi diagnostics completely.
1995-07-29 23:04:54 +00:00
a4fcbe857d
Don't loop if we're out of CCBs/SCBs/MSCPs.
1995-07-28 22:49:56 +00:00
38036ed16e
Fix an oversight in the previous.
1995-07-27 05:01:08 +00:00
c9f7b2a185
Add PCI-specific configuration for PCnet-PCI.
1995-07-27 04:39:05 +00:00
7ba8b413d9
Disable diagnostics related to expected mbi race condition.
1995-07-27 01:00:11 +00:00
e8c91e1129
Fix typos.
1995-07-25 05:11:11 +00:00
e413887539
Update to use dev/ic/am7990.c.
1995-07-24 18:04:21 +00:00
830a91b2e9
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:16:44 +00:00
a696e525b7
fix function prototypes, usages, to match what the code actually does
1995-07-24 05:54:52 +00:00
bdb9d41d7e
Fix thinko in packet size diagnostic.
1995-07-24 04:12:45 +00:00
2d37aba592
Add missing `break;'.
1995-07-24 02:46:47 +00:00
ff82158c19
Fix typo.
1995-07-24 02:43:11 +00:00
4f36e42ff4
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:40:38 +00:00
413a5efc0c
Pass a softc to leget(), not an ifnet.
1995-07-24 02:29:59 +00:00
33292f0f88
Fix typos.
1995-07-24 02:08:13 +00:00
7998e5ab4c
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:02:45 +00:00
b5699db68d
Rename new xmit_busy back to txb_inuse.
1995-07-23 23:42:47 +00:00
799910cb2c
Remove txb_inuse. Other stylistic changes.
1995-07-23 22:12:16 +00:00
1df91e03ca
Remove a noop clearing of IFF_OACTIVE.
1995-07-23 22:09:11 +00:00
1199b1b042
Exchange xmit_free for xmit_busy. Add BPF hook to iestart().
1995-07-23 22:02:20 +00:00
317db86dd3
Stylistic changes.
1995-07-23 21:37:51 +00:00
9b2ae2a3cd
Stylistic changes.
1995-07-23 21:26:48 +00:00
4da9a5f814
Stylistic changes.
1995-07-23 21:14:31 +00:00
644935b313
Slight rearrangement. Also, force eg_incount to 0 after a reset.
1995-07-23 20:54:23 +00:00
ecf259e342
Call epmbufempty() any time the board is stopped.
1995-07-23 20:46:49 +00:00
57528ce346
Init functions are always called at splimp().
1995-07-23 20:36:51 +00:00
6bc1cc31f8
Push the copying of the output buffer further down, with the intent of
...
eliminating it and outputting the mbufs directly. Make sure the queue drains
even if packets are not failing to transmit.
1995-07-23 20:27:48 +00:00
a8ce47fa44
Remove extra spls in el_init().
1995-07-23 20:11:55 +00:00
90da0e3a99
Kill return values in egstart().
1995-07-23 19:45:42 +00:00
3d1d0d928b
Update prototypes.
1995-07-23 17:57:39 +00:00
a16702ce45
Various:
...
* Fix ugly looping constructs.
* Add a missing splx().
* Eliminate sc_pktbuf.
1995-07-23 17:50:56 +00:00
8593f3a607
Recode elread() and elget() like other drivers.
1995-07-23 17:05:26 +00:00
a1a31f853c
Fix pasto.
1995-07-23 16:43:40 +00:00
9c26c4da18
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:42:49 +00:00
465cfd15f0
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:32:33 +00:00
693043d786
GUS audio driver from John Kohl.
1995-07-19 19:58:09 +00:00
880567e771
fix from Onno van der Linden for large-file read timeouts on double-speed
...
drives. A different read command must be used on double-speed drives.
It boggles my mind that people could design hardware this stupid.
1995-07-10 01:27:24 +00:00
e574814605
insert missing call to splx() when {aha,bt}_send_mbo() returns null.
...
from enami@sys.ptg.sony.co.jp .
1995-07-08 00:34:16 +00:00
4b4b3ee81a
Cleanup
1995-07-07 02:19:48 +00:00
dd3d2e28ed
Setup irq correctly (PR#1179)
1995-07-07 02:15:12 +00:00
0bdd4aa7c2
add support for cs4231
1995-07-07 02:11:45 +00:00
9624704e02
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-05 02:32:53 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
eb99dcc09a
Fix a condition where ttywait() wouldn't be woken up. Also, short-circuit
...
the case of no pending input in compoll().
1995-07-04 06:47:18 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
bc9de32349
make dump stubs consistent
1995-06-26 05:34:44 +00:00
2a8d6461a8
implement new-style block device dump routine if __BDEVSW_DUMP_OLD_TYPE
...
not defined, otherwise use an "not implemented" stub.
1995-06-26 05:16:55 +00:00
7491d6cbe5
if subdevices specified with wildcarded unit number, config_attach()
...
can change the cf_unit, so save it before attach and use saved value.
1995-06-26 04:08:04 +00:00
d9fc8ef092
Remove check for if_addrlist == 0; if_attach() always puts one address on
...
the list, so this is a noop.
1995-06-12 00:09:42 +00:00
e6c81430d2
Add missing `break;'s.
1995-06-09 18:09:27 +00:00
da5b5dfa63
make match/attach routines and cfdriver struct mi
1995-06-07 06:46:04 +00:00
5a29222f9c
prototype isascan, spacing
1995-06-07 06:45:44 +00:00
4bfd7749ad
Various:
...
* Check for CTS in the correct register.
* Only do a selwakeup() if we output something.
* Don't make assumptions about what TTYDISC does.
1995-06-05 19:08:09 +00:00
5b37a8fded
Handle BREAK correctly when not entering DDB.
1995-06-04 20:50:14 +00:00
38847d04c0
Add an input FIFO, and fix several flow control problems. Based on code from
...
Felix A. Croes.
1995-06-04 20:39:22 +00:00
d045544ebd
Changed ns82450 to ns8250 and dropped ns82550 from probe console messages.
1995-06-01 21:26:51 +00:00
488bc82ac3
Fix multicast filter calculation.
1995-05-28 11:29:46 +00:00
addaff473b
Only use the `no pending interrupt' bit in the IIR; the other bits
...
are too unreliable on clone chips.
1995-05-28 03:26:37 +00:00
3ebc44f6e1
isa softc structs are larger than 'struct device'
1995-05-17 02:07:03 +00:00
c821cb684a
(1) conditionalize debugger usage in comeint with DDB, not COMCONSOLE;
...
latter would lead to undefined symbols if DDB not defined.
(2) check for break on console, and therefore debugger entry (if ddb
in kernel) earlier, so that the device doesn't need to be open.
(3) return immediately after breaking into the debugger in comeint().
(4) only do the normal character input routine in comintr if receive
mask yeilds _EXACLTY_ LSR_RXRDY. if there's only a receive
error, or there's a receive error _and_ a received character,
do comeint().
(former two by me. latter two from Bob Baron <rvb@cs.cmu.edu>.)
1995-05-12 17:54:41 +00:00
8742c18c06
Update for slightly modified ARP handling.
1995-05-10 14:04:14 +00:00
c68110e043
Remove strings
1995-05-08 22:01:34 +00:00
05f27a97ce
Fix holes in device index space. PR#1028
1995-05-08 17:28:51 +00:00
1e0c08b206
uncomment cy driver spec; i386 conf.c needs the header file.
1995-05-03 17:09:28 +00:00
825d2fee22
Add Masahiro SEKIGUCHI's MB8696[05] driver, ported, with some additional
...
changes by me:
* Make autoconfiguration work correctly for more models of AT1700.
* Make the debugging code more robust and complete.
* Tweak the output routine for better performance, and to eliminate an ugly
kluge.
Various other style cleanup. Needs more work.
1995-05-01 02:47:07 +00:00
03e77f5565
Tweak the output routine for slightly better performance.
1995-05-01 02:39:30 +00:00
c9319ad5c4
<break> --> ddb if defined(comconsole).
...
(if you have a serial console and you hit break, you get ddb).
1995-04-28 00:34:08 +00:00
686da9ddb7
copyright foo.
1995-04-27 14:50:58 +00:00
6bb0f284d0
Turn off some debugging code by default.
1995-04-27 01:46:47 +00:00
1f4378da60
Fix nits from Mike Long <mike.long@analog.com> PR#996
1995-04-26 21:45:57 +00:00
cb856a9a4d
Watchdog now takes an int, not a short.
1995-04-19 22:42:51 +00:00
9e28a35469
Fix thinko in previous change.
1995-04-19 22:04:33 +00:00
53d73c77a5
Garbage collect #includes.
1995-04-19 19:10:35 +00:00
4c28b7cb87
Change `needs-count' to `needs-flag'.
1995-04-19 19:02:54 +00:00
e1315808a7
Implement comtty().
1995-04-19 18:59:27 +00:00
496acd4619
Correct a couple of things, and add a `fe' device.
1995-04-19 02:11:10 +00:00
800b1f371a
Fix obvious bug in reading from SB_MIC_PORT.
1995-04-17 23:48:06 +00:00
15552a0e17
if_le conflicts with the Alpha; move description back to i386
1995-04-17 20:23:32 +00:00
af67271a66
try to actually (gasp!) describe the drivers.
1995-04-17 17:54:15 +00:00
d61eaf6f6d
ISA config.new files description.
1995-04-17 16:58:30 +00:00
982230db44
update for new locations
1995-04-17 15:48:20 +00:00
8a640328ed
clean up several ISA device interfaces: autoconfiguration, header
...
inclusion, and interrupt configuration. more work still needs to be done,
but it's getting better...
1995-04-17 12:06:30 +00:00
04e937dcbd
Don't boundary check I/O to the `raw' partition.
1995-04-15 05:01:26 +00:00
c7a7d5c262
Sync with the rest of the world.
1995-04-11 05:10:20 +00:00
8d8af964a7
Move NIC register definitions to a global location.
1995-04-11 04:45:26 +00:00
b703c76655
Update for if.h. Define helper macros for accessing NIC registers. Optimize
...
edrint() a little more.
1995-04-11 04:38:42 +00:00
70839d3b04
Change start and watchdog return values to void.
1995-04-10 18:21:42 +00:00
68c8c80929
kernel_pmap --> pmap_kernel()
1995-04-10 16:48:27 +00:00
e25c1817cf
kernel_pmap --> pmap_kernel()
1995-04-10 13:08:28 +00:00
95c5c4f79f
Most of the console functions return void. Also change interrupt logic
...
slightly.
1995-04-10 01:05:55 +00:00
87d43afd46
Clean up to match common code, and fix a typo.
1995-04-07 22:27:42 +00:00
0e67f2a78e
Rename a few constants to match the chip documentation.
1995-04-04 01:59:28 +00:00
13ac06ec6a
More debugging printf()s, from Rafal Boni.
1995-04-04 01:44:23 +00:00
c04ae31e95
Prototype iexmit().
1995-04-03 21:22:37 +00:00
9085715229
Some pseudo-random cleanup, and try to start transmitting packets quicker.
1995-04-03 21:17:13 +00:00
7e2dabf972
Add a missing unlock.
1995-04-01 10:29:41 +00:00
508897dfcc
Insert a missing unlock.
1995-04-01 10:27:56 +00:00
03e3548ec7
Change the locking protocol to match other drivers.
1995-04-01 08:45:33 +00:00
5ef3b8b957
Always load the TOC. Turn off the TOC bit in the mode register so the busy
...
light goes off.
1995-04-01 08:40:11 +00:00
e17c63cee6
Revamp the locking mechanism slightly. Update some outdated comments, and add
...
a few new ones.
1995-03-29 23:36:27 +00:00
0884490297
KERNEL -> _KERNEL.
1995-03-29 21:56:46 +00:00
71ab4ed9dc
KERNEL -> _KERNEL
1995-03-28 18:13:48 +00:00
aff93b44b4
Remove unused variable.
1995-03-27 21:44:11 +00:00
657ddd6fde
Remove a tiny bit of redundant code.
1995-03-27 18:08:34 +00:00
0a3d4f358a
It's not necessary to do a GETSTAT before each read.
1995-03-27 16:48:45 +00:00
c61cb27f9c
Small garbage collection, and turn off debugging info by default.
1995-03-27 16:04:07 +00:00
306af9bd89
Largely rewritten by me, with some input from Dave Burgess. Implement most of
...
the CDIOC* calls correctly, improve performance by 10x when interrupts work,
and implement the same generic disk framework as other drivers.
Needs some more work.
1995-03-27 15:45:20 +00:00
7c04233887
KERNEL -> _KERNEL
1995-03-26 20:23:52 +00:00
b51403f60d
Remove the write protect check altogether, and rely on the drive to do it.
1995-03-25 19:45:18 +00:00
ff6c206c3f
Use void* rather than caddr_t in many places.
1995-03-25 00:00:53 +00:00
06d0a67a07
Check for read-only media in open(), not write().
1995-03-23 12:11:07 +00:00
02df08a47e
Allow DIOCWDINFO even if label is not `writable'.
1995-03-23 11:33:18 +00:00
331f0252c6
Fix probing of slave devices and remove unneeded ffs()'s
1995-03-21 14:05:28 +00:00
8193ffc379
Add support for PAS 16 basic
1995-03-15 18:45:58 +00:00
af46d07f24
fix compilation error. don't bother checking for IRQ2
1995-03-15 16:43:09 +00:00
36fa07bde5
Fixes defect port-i386/860 from John Woods (jfw@jfwhome.funhouse.com) with
...
supplied patch. Kernel will not link with only ProAudio Spectrum driver
specified.
1995-03-14 18:43:19 +00:00
f3226ad49e
Fixes defect port-i386/864 from John Woods (jfw@jfwhome.funhouse.com) with
...
supplied patch. pas.c doesn't recognize ProAudio Spectrum 16 Basic card.
1995-03-14 18:41:36 +00:00
37c67f3481
Turn off two diagnostic printfs by default.
1995-03-14 02:35:11 +00:00
7ce1465911
Fix SB8 playback. From David Gluss <david@pure.com>
1995-03-13 14:37:12 +00:00
1c9582b63e
Add IRQ 9 as a valid IRQ
1995-03-13 14:29:11 +00:00
83fffa3985
Cleanup for SB16 (From Jan Sparud)
1995-03-08 18:27:35 +00:00
63d3904bce
Use irq directly not as a mask
1995-02-28 21:47:42 +00:00
48b5b94c4f
fix some typos. from frank@fwi.uva.nl (Frank van der Linden)
1995-02-27 09:10:24 +00:00
2c0f263ee7
use wdc_softc in wdccd, rather than wd_softc; from chuck cranor. (pr 828)
1995-02-27 01:08:01 +00:00
559df5705c
PSS driver; needs testing with config.new
1995-02-21 04:15:03 +00:00
39b8de8e12
Driver for Windows sound system; not extensively tested
1995-02-21 02:28:42 +00:00
32eec53a2d
SoundBlaster driver for SB, SB16 and SBPRO
1995-02-21 02:28:06 +00:00
a70ae7273c
PAS driver; uses SB emulation for now
1995-02-21 02:27:18 +00:00
977594d1a9
Driver for ad1848 codec
1995-02-21 02:26:39 +00:00
8b834a58ca
Display more information when we get bogus data off the card.
1995-02-19 18:05:45 +00:00
0f894be19c
Rearrange epintr() to insure proper edge-trigger of the interrupt latch.
1995-02-19 06:13:53 +00:00
a36de19f90
Make some guesses about how to properly configure the interrupt masks. Back
...
out part of the previous change until I get some documentation on these boards.
1995-02-10 01:37:57 +00:00
e9c2b98c11
Comment a potential bit of lossage.
1995-02-02 21:08:42 +00:00
8abb91e18d
Various:
...
* Make synchronous negotiation work.
* Use the bitbucket when the target requests too much data.
* Loop in aicintr() until we get to a state where we have to wait.
1995-02-01 21:49:37 +00:00
ab5662014f
Correct some more of the synchronous stuff, and omit it completely if
...
AIC_USE_SYNCHRONOUS is 0.
1995-02-01 16:56:42 +00:00
4653b28a42
Various:
...
* Always enable disconnection.
* Add some more per-controller variables: initiator ID, clock frequency,
min and max sync period.
* Correct sync period calculations.
* Remove sc_progress.
* Move most of the reselection handling into a separate function.
* Remove some outdated comments.
* Remove message bytes from FIFO even when dropping them on the floor.
* Some cosmetic cleanup.
1995-02-01 16:11:43 +00:00
16e77e7281
Fix path to if_lereg.h.
1995-02-01 09:54:36 +00:00
3a7bbb1acd
lip service to making ISA support machine-independent. This is the first
...
round: moving the drivers into a machine-independent directory.
Some drivers (e.g. fd.c) not moved because they use other pc features (e.g.
CMOS settings), and none of the non-driver files moved, because they're
still pretty much PC specific. eventually (when other ports with ISA
busses really start using this code), more 'high-level' ISA support will
live here.
1995-01-29 07:36:54 +00:00
f11e7e33fe
use chip headers in /dev/ic
1995-01-29 02:58:20 +00:00
c5d5ca8150
Don't check the control port at all; too unreliable.
1995-01-26 07:35:49 +00:00
c0e2bd26f1
Initialize the new xmit state correctly. From Rafal Boni.
1995-01-26 04:13:23 +00:00
57f2c598c7
Various changes from Rafal Boni to improve performance and reliability. Also,
...
clean up the formatting a little more.
1995-01-23 04:50:08 +00:00
01ce8db055
Fix the problem with identifying cards on warm boot. Partly from Greg Hudson.
1995-01-22 07:37:28 +00:00
3dddacd1ce
Rearrange tests so `offline' has higher priority than `out of paper'.
1995-01-22 00:12:39 +00:00
fcdbd2bd7b
Remove outdated comment.
1995-01-16 10:36:26 +00:00
87d587e640
Simplify some sanity checks.
1995-01-13 14:46:44 +00:00
1e5cd9212d
(Almost) allow sector sizes other than 512 bytes. Reduce some expensive operations.
1995-01-13 12:30:59 +00:00
7650bd97fc
Always boundary check I/O.
1995-01-13 10:46:32 +00:00
0033c975c6
Fix another bug in the DMA code.
1995-01-13 10:22:58 +00:00
4abdb375bc
Minor rearrangement.
1995-01-13 09:40:21 +00:00
c2bc310a37
Change the way sc_skip is used. Fix a bug in the (incomplete) DMA code. Add a
...
new sc_blkno (which will be useful later).
1995-01-13 08:58:16 +00:00
0a22930d97
Explicitly test the RXRDY status bit on incoming characters.
1995-01-11 09:56:40 +00:00
06b0414491
Actually, do the ID reset in elink_reset().
1995-01-07 21:37:54 +00:00
37e16c5747
Don't print line numbers in most of the diagnostics.
1995-01-07 06:49:35 +00:00
d4f91d51a9
Fix a race condition between normal I/O and wd_get_parms().
1995-01-07 03:07:22 +00:00
7f61bec5cd
Cosmetic changes, to look more like the new esp.c will.
1995-01-07 01:51:07 +00:00
ba288b4ae1
Do the reset in the individual drivers, not in elink_idseq().
1995-01-06 21:41:26 +00:00
6125e1b551
Fix oversight in previous.
1995-01-04 00:47:53 +00:00
9e499d41b3
\
...
These files have been 99% rewritten from the original ast driver. Add an
appropriate copyright notice.
1995-01-03 22:38:54 +00:00
0349c5b9e0
Add a multiplexer for BOCA serial boards.
1995-01-03 22:26:36 +00:00
09834a5bd3
This is correct according to the docs on both cards.
...
Doesn't seem to make any difference to the known problems though.
1995-01-03 05:04:04 +00:00
b6c8a9a4e9
Update intr_establish() prototype.
1995-01-03 03:14:35 +00:00
b5cf1b5ddd
Add interrupt sharing types.
1995-01-03 01:30:14 +00:00
326830c1ba
Use direct config for subdevices.
1995-01-02 22:27:46 +00:00
e148dc7a64
Move setting of sc_maddr so soft config works.
1995-01-02 22:01:05 +00:00
a774fa6fe5
Use soft configuration when possible.
1995-01-02 21:57:04 +00:00
3a967fcbb6
More cleanup.
1995-01-02 21:27:27 +00:00
72dec3b548
Various cleanup.
1995-01-02 20:54:01 +00:00
3a74796b3e
Need isareg.h.
1995-01-02 20:39:35 +00:00
894bb9145f
Use soft configuration where possible.
1995-01-02 20:32:55 +00:00
2d5b04744a
Don't assume ia_maddr is in the hole.
1995-01-02 20:06:29 +00:00
76b0b02cc3
Fix non-serious typo.
1994-12-31 05:34:00 +00:00
8fd135209c
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 19:42:47 +00:00
262b425866
temporary warning until I get new docs.
1994-12-28 16:47:50 +00:00
ce06e718ad
Fix flags to isa_dmastart().
1994-12-17 18:45:11 +00:00
ca65f2ce5d
Remove dkbad.h.
1994-12-14 15:17:22 +00:00
e694663b46
Make the diagnostics less cryptic.
1994-12-12 04:43:51 +00:00
3e4a358e28
Patch from Thomas Eberhardt to make PCnet-32 chips work.
1994-12-12 04:39:52 +00:00
303841c92e
3c509 fixes to avoid adapter getting stuck in high traffic conditions.
...
I don't particularly like the fixes, but at least now the 3c509 never
gets stuck. On the other hand, performance still sucks in some cases.
1994-12-10 14:52:02 +00:00
793e542f89
Fix format of attach message.
1994-12-10 05:55:26 +00:00
211b002017
Ignore ERR during diagnostics.
1994-12-01 10:45:26 +00:00
867ebf1d84
Clear the controller active flag after a timeout.
1994-11-30 02:32:03 +00:00
5584ff927f
Don't stall the queue on CHECK SENSE if we get a reselect while selecting.
1994-11-30 02:08:01 +00:00
639a64de08
Fix a null pointer reference.
1994-11-29 21:35:13 +00:00
51bed8d804
Add an assertion mechanism to check for more abnormal conditions.
1994-11-29 21:29:56 +00:00
58cb5339d6
For consistency...
1994-11-29 20:57:28 +00:00
41b26a6dfd
Handle BUS FREE phase a little differently, to get better error detection. Other
...
cleanup.
1994-11-29 20:08:27 +00:00
bb90feebac
Disable debugging breakpoints by default.
1994-11-29 17:56:49 +00:00
5ac2484d95
* Redo most of the message and phase state machines. Multiple pending
...
message outs should now work correctly (including retransmissions).
Multiple messages ins should be more efficient. Missing REQ after
reselection phase should now (correctly) cause a wait with ENREQINIT
set.
* Abstract out the reselection out sequence, and use it directly to
get sense info. (This is somewhat faster than the generic done/sched
sequence.)
* If there are no ACBs available, wait interruptibly for one.
* Leave the interrupt registers alone during message in/out; just
watch for phase change. Don't (incorrectly) reenable interrupts
during data in/out; defer that to aicintr().
* Handle command pointer per SCSI 2 spec.
* Other minor coding improvements.
1994-11-29 17:50:39 +00:00
6a2c060851
fix unary plus typo :-)
1994-11-25 23:19:03 +00:00
cba32aa25f
Minor update for new autoconfig.
1994-11-25 08:17:21 +00:00
0649f37219
Officially credit Onno.
1994-11-23 22:00:08 +00:00
2058abab15
Forgot to commit this as part of the LBA changes.
1994-11-23 07:56:52 +00:00
cc44b4600c
There's no point in bothering to unlock what we didn't lock.
1994-11-23 07:54:15 +00:00
6dda55519e
Fix an outdated comment.
1994-11-23 03:11:01 +00:00
a3fc466734
Use logical block addressing if available. Be a little more careful about
...
maintaining timeouts. Clean up wddump() a bit.
1994-11-23 01:35:43 +00:00
525fc36e19
Implement 32-bit reads and writes, but for now assume 16-bit mode.
1994-11-22 10:20:16 +00:00
3a99ddf172
Add a missing newline in some error messages.
1994-11-22 09:36:56 +00:00
db3bde9525
Implement EIDE multi-sector PIO and DMA modes, based on code from Onno van
...
der Linden. Also, various structural cleanup, and fix two bogons that crept
in, and remove all of the old clustering nonsense.
1994-11-22 09:33:59 +00:00
1e01855683
Minor fix to debugging code.
1994-11-22 05:50:48 +00:00
85826f0fbe
Fudge a couple more fields for ancient disks.
1994-11-22 05:39:16 +00:00
e1a7bac628
Change some constant names, etc., to better match the ATA spec.
1994-11-22 05:34:49 +00:00
95edd299b0
Add still more locking.
1994-11-22 03:23:49 +00:00
5bd4115690
Add some missing locking, and some general cleanup.
1994-11-20 22:36:43 +00:00
9a3840f2f0
Stylistic changes.
1994-11-18 22:25:12 +00:00
61800cfa25
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 22:07:32 +00:00
35cdd801e6
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 21:57:40 +00:00
a2727ec558
Check IRQ 9, not IRQ 2.
1994-11-15 00:00:24 +00:00
b341f7a8c0
Map IRQ 2 to IRQ 9.
1994-11-14 23:58:56 +00:00
21e911d911
Update for new autoconfig.
1994-11-07 09:03:48 +00:00
2a9b6f7959
Fix stupid bug in last change.
1994-11-04 23:30:15 +00:00
4ec6774e12
Add a simplified version of wdcommand() that can be used in some cases.
...
Avoid needing a wd_softc inside wdprobe().
1994-11-04 23:18:06 +00:00
3df6bf0c0e
Trivial stylistic changes.
1994-11-04 21:32:23 +00:00
854d8d96dc
Rearrange slightly.
1994-11-04 19:25:34 +00:00
cfc4633919
Remove outdated comment.
1994-11-04 19:17:47 +00:00
b7acf321cd
No longer needs icu.h.
1994-11-04 18:59:34 +00:00
29414c5a0a
Change all of the uses of IRQ{0-15} and bit masks to use plain numbers
...
rather than bit shifting.
1994-11-04 18:34:50 +00:00
9af4fee97d
Use kvtop() rather than address arithmetic in a couple of places.
1994-11-04 08:55:53 +00:00
1948fcb3fa
Add a new function config_scan(), which just calls a particular function
...
with each plausibly cfdata, ignoring the priority mechanism completely.
1994-11-04 06:40:11 +00:00
2e8ae560f6
Commit incest with the config system for this one specific case.
1994-11-04 03:57:32 +00:00
fa769b0e97
Set ia_irq correctly.
1994-11-04 02:55:32 +00:00
7773b21b74
Correct an oversight.
1994-11-04 00:53:06 +00:00
d4dd538296
Oops; forgot isacd.
1994-11-04 00:07:39 +00:00
3fca7e771a
New version using standard config_*() functions.
1994-11-03 23:53:19 +00:00
ebbdd6473b
Update to match autoconfig code.
1994-11-03 23:26:03 +00:00
19fc9d55c8
*intr() arg does not need to be void*.
1994-11-03 23:23:38 +00:00
d0163400d1
Update to match autoconfig code.
1994-11-03 23:21:24 +00:00
54cc63645d
Update to match autoconfig code.
1994-11-03 23:08:27 +00:00
d23d1e83dc
Use indirect config for subdevices, and add dkdrivers where missing.
1994-11-03 22:55:58 +00:00
283745574f
Commit this, though it really does need work.
1994-11-03 16:55:57 +00:00
6ac2bbfc35
be more careful with types, also pull in headers where necessary.
1994-10-30 21:43:03 +00:00
9769a6a6f7
Various:
...
* Forget all cached info when opening a new disc.
* If the disc is removed, flush the buffer queue rather than stalling it.
* Set the default label after getting the disc size, and fill in the info
for RAW_PART also.
* Change another use of the unit number to a softc pointer.
* Use a dkdevice to hold the label and open partition masks.
* Force the partition offset to 0 for RAW_PART, regardless of the label.
* Nuke MCDPHYS() and MCDREADRAW; they had a silly bug that caused the code
to not work, and they aren't useful anyway.
Some other minor cleanup.
1994-10-28 23:39:59 +00:00
022ee8f7fe
new RCS ID format.
1994-10-27 04:14:23 +00:00
556a119342
Implement *cnpollc().
1994-10-26 18:06:30 +00:00
260ddbefb7
Rearrange ed_init() slightly, to better correspond to the National manual.
...
Optimize ed_rint() slightly in the case of multiple packets. (Avoid an outb
and an inb for each packet).
1994-10-23 23:24:56 +00:00
603fe7b5a6
Slight optimization.
1994-10-23 21:38:00 +00:00
0114159848
Fix the packet length correction for buggy chips so that it actually works,
...
and always use it (otherwise short packets could still be corrupted). Also
produce a diagnostic message if DIAGNOSTIC, since it *is* a hardware bug.
Add an ED_PAGE_SHIFT constant, and use it, to avoid GCC doing horrendous
things with divides and multiplies.
1994-10-23 21:22:13 +00:00
3e30a415ae
Be careful not to stack multiple timeouts.
1994-10-20 19:22:01 +00:00
4d072c5435
Remove the local timeout mechanism, and just use explicit timeout()/untimeout()
...
calls.
1994-10-20 18:37:45 +00:00
c11a06cbc2
Always set d_secsize to 512 for now.
1994-10-20 17:03:09 +00:00
0862d07daf
Don't switch to single-sector mode just because we got a corrected error.
1994-10-20 16:36:21 +00:00
d4153fff4d
Rearrange wdcstart() in a more logical fashion, and eliminate many redundant
...
calculations. Also, speed up bad block searching a little.
1994-10-20 16:19:08 +00:00
cd66683989
openpart -> openmask
1994-10-20 14:08:07 +00:00
cae71ba91d
Various changes:
...
* Add a dkdevice; move sc_*openpart, sc_label, and sc_cpulabel into it.
* Turn sc_wlabel into a flag, and don't set it automatically in DIOCWLABEL.
* If there is no label, disallow all I/O except to the raw partition.
* Don't allow I/O to `unused' partitions.
* Beginnings of support for block sizes other than 512 bytes.
Other minor changes.
1994-10-20 13:44:46 +00:00
8ae8b4ab29
Bug fixes from Rafal Boni:
...
* Set promiscuous mode flag before configuring card, so it actually works.
* Handle failed TDR commands correctly.
* Remove some apparently defunct and bogus code.
(This driver needs more work.)
1994-10-18 13:40:30 +00:00
320359f8e2
change, requested by Jarle Greipsland
1994-10-17 00:08:29 +00:00
49c34d3337
move arch dependence to archs. clean up a bit. deal with weird MAXPARTITONS.
1994-10-14 18:26:22 +00:00
6f5794ecba
Fix bugs in dealing with odd-length mbufs in ed_pio_write_mbufs(). From
...
John Hood.
1994-10-14 13:05:13 +00:00
7c01f7ce51
Changes from DG to deal with some old chips that corrupt the packet length.
1994-10-12 13:42:00 +00:00
4252ca6644
Correct multicast filter calculation.
1994-10-09 21:19:04 +00:00
236f105ccd
Remove unneeded #includes.
1994-10-09 15:06:23 +00:00
b90985ee3d
Don't poll the BUSY bit until the SDH register is set.
1994-10-07 11:34:52 +00:00
1eaa03e7dc
Fix initial allocation of dev array, and simplify the code
...
slightly.
1994-10-07 09:08:29 +00:00
86e7908a72
Make some comments more clear.
1994-10-01 07:19:32 +00:00
f7b0f89811
Various minor changes to sync better with DG's version.
1994-10-01 07:13:32 +00:00
0e28696023
Add IO_PPI.
1994-10-01 03:52:46 +00:00
e32c213d35
Add IO_PMP[12] and IO_PMPSIZE.
1994-10-01 03:48:49 +00:00
b7cc64e049
Check the SB Pro IRQ and DRQ correctly. From Jason Thorpe.
1994-09-16 23:48:22 +00:00
c7003d37d3
Only reset FIFO if changing baud rate. From John Kohl (slightly edited).
1994-09-16 02:50:39 +00:00
8dd2c63b08
Turn off the delay debugging messages again.
1994-09-12 20:29:08 +00:00
584de55692
Missed an iobase that should be u_short.
1994-09-05 00:21:40 +00:00
a13c1b15cc
Minor.
1994-08-26 12:43:17 +00:00
de20d2cf67
Re-enable EISA reset code -- definately needed now. do RX_DISCARD_TOP_PACK
...
before leaving splhigh(), to give incoming packets a better chance.
1994-08-26 12:11:44 +00:00
6c2b49032b
fix debugging stuff, from dean
1994-08-25 20:18:25 +00:00
5e4a51278b
Set the FIFO threshold based on the receive speed, per Mark Weaver.
1994-08-24 07:25:18 +00:00
c4eac0f370
Some cleanup, checked by Dean.
1994-08-23 23:40:55 +00:00
8ac5e10c5d
Various code cleanup.
1994-08-23 19:30:12 +00:00
666f228bab
add `eg' driver for the 3c505 by <dean@fsa.ca>
1994-08-23 17:59:33 +00:00
996b2b5c54
Disable EISA reset, for now.
1994-08-22 21:53:23 +00:00
71c5da7bfb
Fix typo in WDCS_BITS.
1994-08-22 21:43:35 +00:00
8b8390a4bb
Look for MDMBUF in cflag, not lflag.
1994-08-21 15:04:37 +00:00
256353ef62
multicast
1994-08-17 06:04:49 +00:00
5f27568164
Eliminate struct pte and struct pde.
1994-08-15 14:46:45 +00:00
36975ff354
Don't use altsts. Sigh.
1994-08-15 08:22:20 +00:00
a618f9d915
Slight optimization, and don't go bonkers if one of the sub-devices is not
...
configured.
1994-08-14 14:13:25 +00:00
a570fcd929
Re-enable EISA reset.
1994-08-14 09:43:59 +00:00
cd2f7cc8a0
Clean up a little.
1994-08-14 09:24:55 +00:00
061c42c22d
Minor update.
1994-08-08 07:09:31 +00:00
59de58a39b
Count up the silo overflows and only log a warning at most once per minute.
1994-08-07 11:27:51 +00:00
9c8afcf191
Avoid using DFIFOHF, which doesn't exist on 6260 chips. Turn off
...
AIC_USE_DWORDS by default.
1994-08-07 10:51:40 +00:00
d9a996a92e
Add multiplexer for RT 4-port serial cards.
1994-08-07 10:45:53 +00:00
b6e9bf14c8
Simplify the DEPCA memory test, and fix a problem with using the alternate
...
PROM address.
1994-08-07 00:56:04 +00:00
ebd23fe5e0
cleanup
1994-08-06 23:19:39 +00:00
558c00c001
Fix spelling of `STEREO'.
1994-08-05 22:56:19 +00:00
cefefb25ca
cleanup, working 32 bit IO on the 3c579, and memory alignment of insl/insw
...
for better performance.
1994-08-05 21:16:33 +00:00
9d7eefb176
Change iosize to 16.
1994-08-03 09:17:12 +00:00
a17171c0a2
Add a missing splx() and increase the reset delay during probe, as suggested
...
by Juergen Keil. Add a diagnostic message if the controller info is not what
we expect.
1994-08-03 08:57:59 +00:00
45b0217c1e
Fix up u14_find() a bit; mainly, don't include a DRQ for the 34f.
1994-07-31 19:21:40 +00:00
a00c5fdb91
Add some missing newlines in the attach messages.
1994-07-31 18:25:50 +00:00
8a9df6389d
Bug fixes from Mark Weaver.
1994-07-31 11:34:38 +00:00
53f3b61cdc
Redux.
1994-07-28 19:57:31 +00:00
c405e84a24
port --> iobase
1994-07-28 09:50:33 +00:00
d02e11d543
Make the EISA reset code like the other drivers.
1994-07-28 08:44:47 +00:00
fb500c4d07
Redo some of the EISA config stuff.
1994-07-28 02:39:21 +00:00
c1a5741a3b
Remove unused macros.
1994-07-27 15:02:59 +00:00
5e04cfb942
Fix typo.
1994-07-27 13:24:17 +00:00
1939acdbd2
Fix the DMA setup.
1994-07-27 13:10:33 +00:00
1a9c6d05a3
Enable IRQ probing, and fix the DMA setup.
1994-07-27 12:57:02 +00:00
dffcd8ea8d
Enable IRQ probing.
1994-07-27 03:09:21 +00:00
16878bf2f9
Enable IRQ probing.
1994-07-27 01:50:57 +00:00
35b4db3030
Add IRQUNK.
1994-07-27 01:50:15 +00:00
b5ce4d0cdd
Normalize label handling.
1994-07-26 19:36:06 +00:00
a18c0c0d83
Look for errors in the right place in a transmit descriptor, and count
...
collisions.
1994-07-25 22:54:58 +00:00
220a5a5095
Add missing splbio()s, pointed out by Gene Stark.
1994-07-25 04:29:56 +00:00
1c46c460ee
Return EINVAL if the requested transfer size is weird.
1994-07-21 23:44:16 +00:00
7fca65c005
Remove something which cannot possibly be correct.
1994-07-21 04:15:05 +00:00
37dc11891c
Fix a typo.
1994-07-21 03:40:53 +00:00
4469aea569
Do the EISA probing a little differently.
1994-07-21 03:30:18 +00:00
3013b3fdbc
check if eisa card exists before tromping on dma
1994-07-21 02:51:53 +00:00
cc9da7d69f
Fix failed probe message.
1994-07-16 13:45:59 +00:00
e88e13f3bb
Fix a bogon relating to >16-bit addresses that I introduced. Fix up BPF
...
support for received packets.
1994-07-15 21:20:48 +00:00
db0e00db86
Clean up a bit.
1994-07-10 17:53:12 +00:00
668c4747b3
Rename flags; clean up a bit.
1994-07-05 21:20:20 +00:00
801d30952a
ISDEBUG --> LEDEBUG, and fix some ugly code.
1994-07-02 04:13:16 +00:00
943735dc41
modifications to the threshold and nicer error checking from christos
...
and .. splhigh() around insw/outsw code.. yetch
1994-07-01 23:08:11 +00:00
73aca695ac
Make sure we don't leave the interrupt masked after some errors.
1994-07-01 21:38:19 +00:00
2f609096e4
Inline le{rd,wr}csr().
1994-07-01 21:34:40 +00:00
bf74fc41d1
Add prototype.
1994-07-01 21:33:20 +00:00
f62bc452ca
Correct some comments.
1994-07-01 21:31:14 +00:00
66e72cdf4b
Rename is to le, and add support for some models of DEPCA.
1994-07-01 20:25:25 +00:00
a69dd750a2
b_un.b_addr -> b_data
1994-06-16 01:07:30 +00:00
f4a9e46aaf
Fix unimportant typos.
1994-06-13 18:54:41 +00:00
ff9c5cdde5
Set `uio_procp' field in case we ever need it.
1994-06-09 20:00:13 +00:00
bb4ba15c7f
Add (experimental) 24f handling.
1994-06-08 11:16:49 +00:00
00eb72f54b
two fixes from christos
1994-06-04 01:52:28 +00:00
9bc7771492
Allow the probe to succeed again on 445S cards.
1994-06-03 15:56:18 +00:00
37c76e16d1
Only print the blasted messages *once* per error.
1994-05-27 08:54:52 +00:00
30c08c899f
Copyright foo.
1994-05-25 20:41:53 +00:00
0645f8963f
Check the bus type, and don't attempt to enable the round-robin algorithm
...
on early boards. As suggested by Atsushi Murai.
1994-05-24 13:39:15 +00:00
a9376b883a
MIN --> min
1994-05-24 07:31:12 +00:00
ebcaebd335
MIN -> min, MAX -> max
1994-05-24 02:35:53 +00:00
057dc4deec
quiet compiler warnings
1994-05-23 03:02:13 +00:00
e47989d1e5
turn off spontaneous printing of messages when DEBUG turned on
1994-05-23 02:33:23 +00:00
18dab72811
32bit eisa does not work now, do not even try
1994-05-21 05:34:02 +00:00
922959fd05
Reverse the order of disabling shared memory and turning off 16-bit mode
...
where necessary, per Steve Wallace.
1994-05-19 07:47:34 +00:00
949b970c95
Use ether_ifattach() rather than doing the same thing in each driver.
1994-05-13 06:13:43 +00:00
7040f728a9
Fill in some more struct ifnet fields.
1994-05-11 12:09:17 +00:00
02ec14c597
Add dummy *dump() routines.
1994-05-11 09:49:17 +00:00
bd96a072fd
Nothing of consequence.
1994-05-11 02:28:42 +00:00
fcdc2b3f3f
Remove now-bogus cast.
1994-05-05 08:31:44 +00:00
5f478330e8
Remove now-bogus casts.
1994-05-05 08:31:00 +00:00
04df00527c
Retool the state machine is a sane way.
1994-05-05 08:26:13 +00:00
685508a6b4
Remove now-bogus cast.
1994-05-05 07:52:53 +00:00
a0a7429482
lots of changes: prototype migration, move lots of variables, definitions,
...
and structure elements around. kill some unnecessary type and macro
definitions. standardize clock handling. More changes than you'd want.
1994-05-05 05:35:42 +00:00
a9c3f137b5
Don't frob the connector type if the card doesn't grok soft config.
1994-05-05 02:20:44 +00:00
e5c1d566ef
Really fix the Buslogic/DTC problem.
1994-05-03 20:53:54 +00:00
0ee51c2c8b
Forgot to munge the #includes in last commit.
1994-05-03 20:32:22 +00:00
884168ce49
Move beep junk to clock.c.
1994-05-03 08:23:55 +00:00
36a9bcce8d
Fix argument to aic_sched_msgout() is several places, and condense some code.
1994-05-03 08:20:43 +00:00
394be046a5
insw takes a word count
1994-05-02 06:37:10 +00:00
e0db92993a
change timeout/untimeout/wakeup/sleep/tsleep args to void *
1994-04-29 23:15:51 +00:00
mycroft