Add tests to validate that weston_matrix_to_transform() works properly
on the matrices generated by weston_surface_build_buffer_matrix() and
weston_output_update_matrix()
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Instead of basing this on simple checks, we can test the matrix. This
should result in more opportunistically picking fast nearest neighbour
filtering when it won't result in visible distortion.
For now we only use this in the gl renderer, as paint nodes aren't
plumbed into the pixman renderer yet.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Instead of bailing based on our loosely tracked matrix "type" (that won't
recognize when an operation is reversed by its inverse) use the new
weston_matrix_to_transform to determine if the matrix reasonably matches.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This can be helpful in testing if a paint node needs linear vs nearest
neighbour filtering, or if a view can be placed on a plane.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Let VNC clients authenticate using the local username and password of
the user weston is running as. To avoid transmitting the password in
cleartext, make TLS security mandatory.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add user authentication support for remote backends via PAM.
This requires a configuration file /etc/pam.d/weston.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
A couple of additional assert()s for transforms being dirty in places
where it could lead to unexpected results.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Let's simplify this code by asserting, and letting it explode naturally
(return Inf, possibly SIGFPE depending on external factors) if compiled
NDEBUG, instead of a contained explosion (safely returning 0).
If this actually happens it's Really Bad, so we'd like to catch is ASAP,
especially in CI.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We always set it up correctly, even if transforms are disabled. The code
is simpler if we always use the matrix instead of having two cases.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
If the view transform is dirty it might be incorrect. Also, we normally
set up the view transform matrix properly regardless of whether the
transform is enabled or not - but if we've never run
weston_view_update_transform() it will be all zeros.
This is a step towards removing view->transform.enabled checks and just
using the transform matrix in all cases.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
These places all eventually lead to calling weston_view_to_global_float()
or weston_view_from_global_float() on a view with a dirty transform.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
I inverted the direction of this transform when I stopped doing it from
weston_compositor_pick_view()
Fixes 4d141a788
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
There are two problems here, one is that the surface jump logic only makes
sense if the view remains the same.
The more important fix is that pointer coordinates are in global coordinates
and we want view coordinates, so this test was always wrong and led to an
xdg ping storm due to spurious focus changes.
Fixes 4d141a788
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
weston_pointer_move() can change the pointer->focus, so we have to ensure
we're only testing old_sx and old_sy if we had a focus set before that
point.
Fixes 9b5a525a3d
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This introduces a few getters to retrieve the pending state from
libweston-desktop, now just libweston, and makes use of it,
specifically get_pending_maximized to avoid sending invalid
dimensions to the client in the particular use case
set_maximized/unset_fullscreen.
These pending state getters are useful to query/poke a not-applied
yet state, and could be useful where we don't have a buffer attached
where the client might be set-up as maximized, but internally libweston
hasn't yet applied that pending state.
Fixes#645
Suggested-by: Morgane Glidic <sardemff7+git@sardemff7.net>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
These have been in wayland a while back with version 1.20.0.
We also need to update the test client helper with this bump, as
those bind to version 4.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Before this patch, when a new head is found its information is printed
first as "updated" and then as "found" in the log.
The reason is that drm_head_create() calls drm_head_update_info() which
printed the head as "changed". Then drm_head_create() itself prints it
as "found".
This fixes it to print only once as "found".
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Mimic the existing behaviour of logging once, but make it once
per output instead of per run.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Mimic the existing behaviour of logging 5 times, with no reset, but
change it so it's per device instead of using a static variable.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The current code only prints this once, and this is a probably a sensible
thing to do, as a clock read failure is probably not a condition that will
correct itself.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Ideally we'd like to see this more than just a single time, but we'd also
like to prevent it from triggering endlessly. Let's also make this happen
per output.
While we're here, use the word "abnormal" instead of "insane"
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We have a few places where we log messages only the first time they occur.
Provide a log throttling implementation so we don't have to open code this
in all the places that need it.
Instead of just logging a single time, allow some finer control. We allow
logging of a specified number of events. Additionally, we have an optional
timeout after which the event count is reset so we can log at most N
events in M ms.
The first new event printed after the timeout expires will also include a
count of suppressed events.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Some monitors expose a selector for the kind of content that will get
displayed, allowing them to optimise their settings for this particular
content type.
I got access to such a monitor, sadly even setting it to game mode
didn’t lower its atrocious latency, but drm_info[1] reports it to be set
correctly so hopefully it’ll work better with other monitors.
[1] https://github.com/ascent12/drm_info
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
We're just going to crash at weston_view_from_global_fixed() anyway if
this is untrue, but we have a similar assertion elsewhere already.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Whether these coordinates are "invalid" (set to an unlikely sentinel value)
or not is based purely on whether pointer->view is valid.
Check pointer->view before using these values every time, and stop
using an "invalid" value entirely.
The reason for this is that in the future we're reworking how 2D
coordinates are handled, and removing the dubious conecept of an invalid
coordinate simplifies things a little.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Sometimes callers don't want them, and sometimes (when view is NULL) the
coordinate is invalid.
Waste a tiny bit of time calculating them as needed in the callers
instead.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
sx and sy are meaningless (-1000000) when view is NULL. The case this
is meant to catch is when the surface coordinates change while the
global coordinate doesn't, (eg: max/unmax a window with a keyboard
shortcut) - in that case view will always be set.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We're always passing pointer->x, y converted to surface coordinates, or
garbage if view is NULL. Let's just stop passing those coordinates
entirely and calculate them in the function.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Not all callers of weston_pointer_set_focus use weston_compositor_pick_view
to get their coordinate, so let's log something if the coordinate doesn't
make sense.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Removes the need to fabricate a fake coordinate pair when calling
weston_drag_set_focus to clear focus.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This lets us say what we really mean instead of passing a NULL output
and garbage co-ordinates.
This will help later when manufacturing garbage coordinates becomes much
harder to do.
The clear_pointer_focus() path continues to do nothing, and is just a FIXME
macro, as it has been for a very long time...
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This adds basic VNC protocol support using the Neat VNC library
(https://github.com/any1/neatvnc). Neat VNC depends on the AML main
loop library. The backend makes use of AML's integrated epoll backend
and connects AML via file descriptor with the Wayland event loop.
This implementation does not support authentication and hardcodes the
pixel format currently.
Co-authored-by: Philipp Zabel <p.zabel@pengutronix.de>
Co-authored-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
[r.czerwinski@pengutronix.de:
- use new (as of 0.5.0) Neat VNC buffer API, with a buffer pool]
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
[p.zabel@pengutronix.de:
- transform repaint damage to output coordinates
- transform pointer coordinates into global space
- check that outputs and heads are in fact ours, see aab722bb1785..060ef82d9360
- track damage across multiple frame buffers
- choose pixel format by drm_fourcc, see 8b6c3fe0ad
- enable ctrl and alt modifiers
- fix frame timing to achieve a constant repaint rate
- pass initial size explicitly, see f4559b0760
- use resize_output with pixman-renderer, see 55d08f9634e8..84b5d0eb4bee
- allow configuring the refresh rate]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Deprecate launcher-logind and disable it by default.
launcher-libseat supports logind, so this shouldn't cause any
regression.
Signed-off-by: Simon Ser <contact@emersion.fr>
References: https://gitlab.freedesktop.org/wayland/weston/-/issues/488
This adds a destroy listener on the SHM buffer provided by our client.
It will unregister the frame notify listener in case our buffer is
destroyed before the frame signal is emitted and thus avoid a memcpy
to invalid memory.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
This patch adds the essential LittleCMS color pipeline optimizations and
analysis that is necessary for extracting matrices from pipelines
correctly. When we can extract a matrix and 1D curve sets, we can use
those with GL-renderer without needing an inherently heavy and imprecise
3D LUT. This should improve color transformation precision and
performance when a 3D LUT is not necessary.
The core of the optimization and analysis is a custom plugin for
LittleCMS. The optimization step comprises of repeatedly merging
sequential matrices and sequential curve sets into one and eliminating
identity elements which may allow for more merging. The analysis step
takes the optimized LittleCMS pipeline and attempts to fit all of its
elements into the weston_color_transform model. If it fits, we have an
optimized color transformation and do not need a 3D LUT. If it does not
fit, we use a 3D LUT as before.
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Restructing cmlcms_color_transform_create for readibility.
Also dropped zalloc() check in favor of xzalloc() as per the recent
Weston development policy.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Right now this function only creates a CMM pipeline and produces a 3D
LUT from it, but in the future it can produce other types of
transformations. The function is renamed to xform_realize_chain()
because it creates a chain of profiles, forms a multi-profile-transform
from them, and fits that into weston_color_transform.
The further refactoring supports the future changes, and attempts to
make the code more readable.
There is provision for easily adding more profiles into the chain.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Relax the types of color transformations categories where this function
can be used. Yes, it is only useful for BLEND_TO_OUTPUT, but that is for
the user of this function to take care of. This function always works as
named regardless. The only condition is that output_inv_eotf_vcgt has
been populated, so fill_in_curves() may as well assert that.
While at it, make the code a little more concise. The 'len' assertion
belongs in fill_in_curves() because that is where the problem would
appear if the assertion failed.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Rename cmslcms_fill_in_pre_curve to cmlcms_fill_in_output_inv_eotf_vcgt
due to importance what the function is fetching:
profile->output_inv_eotf_vcgt.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Eotf is the transfer function whose inverse must be used for
converting from output light-linear space to sink electrical space.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Add matrix in color.h
Matrix is used as an optimized method for
color mapping vs 3DLUT.
Nothing sets color mapping to matrix yet.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Add post-curve support in color.h.
Pre-curve and post-curve describe color pipeline components
in a single GL shader invocation.The GL shader is supposed
to match struct weston_color_transform exactly.
We have the following color pipeline:
shader A -> blending -> shader B -> KMS. Both A and B shaders
using the same source file :fragment.glsl.
Each shader has pre and post curve.
The typical color pipeline with 3DLUT:
Shader A: pre-curve identity->3DLUT->blending->post-curve identity
Shader B: pre-curve->3DLUT identity->post-curve identity->KMS
The typical color pipeline with matrix (in next commits):
Shader A: pre-curve->matrix->blending->post-curve identity
Shader B: pre-curve->matrix identity->post-curve identity->KMS
The pre-curve plays role of EOTF (shader A) or INV_EOTF
(shader B) becouse we are stiching the shaders.
We assume that someone in the future may use both pre-curve
and post-curve, for example, when it is not possible to combine
these curves into 3DLUT and we will do mapping elements based on
their location in ICC profile.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Currently the frame event gets lost: The touch focus is removed in the 'up'
event. So the focus is gone when the frame event arrives so it is never sent to
the clients.
To avoid this, keep the touch focus until the frame is handled.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Replace all the remaining weston_output::current_mode and borders[] uses
with the fb_size and the compositing area. The result is the same, but
we stop depending on weston_output, and border texture sizes which may
not be the same as border sizes.
This is more correct, semantically.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Do not use border texture size when we have the area stored. This
decouples border texture size further.
We also have buffer_height available directly from fb_size, so do not
reverse-engineer it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Pure refactoring to make the code easier to read.
Also drop the redundant all-clean check.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Compute the border area from the framebuffer size and composited area
only.
Now the border textures can be freely sized while they will be stretched
to fill the respective border areas. In fact, this was already made use
of by having left/right image height=1 as special cases. Now all the
texture dimensions behave the same.
No change in behavior, the values are the same, just computed
differently.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This moves the identical code from draw_output_borders() and
output_get_border_damage() into a new shared function. Reduces code
duplication.
This is a pure refactoring, all the computations stay the same.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This step prepares to share the coordinate computations between
draw_output_borders() and output_get_border_damage(). The use of
weston_output is replaced with gl_output_state, so that when sharing the
code in a new function, it does not need a weston_output.
This stops the function from accessing output->current_mode and use the
gl-renderer tracked frambuffer size and compositing area instead. Not
using current_mode is a small step towards allowing gl-renderer to
render for other targets than an output.
No behavioral changes, all the values are still the same.
See the diagram in gl-renderer.h for the border areas.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We get rid of unnecessary GL-renderer output state destroy and create,
meaning we don't destroy and create an EGLSurface either.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is necessary if you want to resize an output that uses a shadow
framebuffer, instead of destroying and re-creating the renderer state.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This changes the GL-renderer interface to pass the initial framebuffer
size and compositing area explicitly. All backends are changed to
provide the correct parameters.
GL-renderer mostly does not yet use these values, but later patches
will. The pbuffer path uses it already, because they replaced the
existing fields.
All this is to make GL-renderer aware of the different sizes, so it can
implement the future revision of the screenshooting API.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This will make sure that backends do not forget to tell us about
resizes.
composite_*() functions still read the size from the destination buffer,
because pixman_output_state is not available there.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In a journey to decouple renderer from weston_output, pass the initial
framebuffer size to Pixman-renderer explicitly.
Now Pixman-renderer will never look into weston_output::current_mode.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is necessary if you want to resize a Pixman rendered output that
uses the shadow.
Also reset the current hw_buffer to NULL, because surely it needs to
change and we don't want to keep an old buffer live for no reason if
there happens to be one.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Previously renderers were not told when the output (framebuffer they
need to draw) size changed. Renderers just pulled that information out
from weston_output::current_mode when they happened to need it. This
makes some things awkward, like resizing the shadow or intermediate
buffers. In fact, Pixman-renderer does not even support resizing its
shadow buffer, nor does GL-renderer. DRM-backend has to destroy and
re-create the renderer output state anyway, but rdp, x11 and wayland
backends would be natural users of resizing API.
This commit adds an API for resizing with empty implementations. Actual
implementations will be added in following patches for each renderer
while moving parts of resizing code from backends into the renderers.
No-op renderer needs no implementation.
Only wayland-backend has actual resizing code already, and that is made
to call the new API. Unfortunately, Pixman and GL renderers differ: one
does not blit them while the other does. In order to assert the
functionality of each renderer to keep the API consistent,
wayland-backend needs to lie to pixman-renderer. That's not new, it
already does so in wayland_output_get_shm_buffer() where the 'pm_image'
addresses only the interior area instead of the whole buffer.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is arguably a little nicer without calling the pixman functions
directly.
In the future when we have different datatypes for coordinates in different
spaces, this test will only be valid on global coordinates, so this change
is also a precursor to stronger type validation.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This was actually introduced as part of desktop zoom. We no longer have
use of it.
This makes a subtle functional change - the output's matrices will now be
up to date immediately in cases where previously that update could have
been deferred.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Except the module dir path, they're one and the same. This change
warrants a libweston version bump, if it hasn't been done already.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Rename weston_output_region_from_global to weston_region_global_to_output,
and also no longer modify in place.
Trying to make it look a little nicer, as well as making it easier to use
from other places that don't want modify in place semantics.
This becomes a very thin wrapper around weston_matrix_transform_region.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Replace all uses of weston_transform_region with
weston_matrix_transform_region, then remove the function completely.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Now that we have weston_matrix_transform_rect we can use that
instead of weston_transformed_coord + viewport_surface_to_buffer.
viewport_surface_to_buffer no longer has users, so remove it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
New function that transforms a pixman_box32_t rectangle by a matrix.
Since pixman rectangles are represented by 2 corners, non-90 degree
rotations can't be properly represented. This function gives the
axis aligned rectangle that encloses the rotated rectangle.
We use this for weston_matrix_transform_region(), simplifying it and
allowing it to work for non 90 degree rotations.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
As clipboard_find_supported_format_by_mime_type() can return -1 if it
can't find out an index avoid trying to print outside of the array.
Fixes the following warnings triggered when enabling FORTIFY_SOURCE
combined with optimizations (-O)
../libweston/backend-rdp/rdpclip.c:1114:17: error: array subscript -1 is below array bounds of ‘uint32_t[5]’ {aka ‘unsigned int[5]’} [-Werror=array-bounds]
1114 | weston_log("RDP %s (%p:%s) specified format \"%s\" index:%d formatId:%d is not supported by client\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1115 | __func__, source, clipboard_data_source_state_to_string(source),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1116 | mime_type, index, source->client_format_id_table[index]);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../libweston/backend-rdp/rdpclip.c:131:18: note: while referencing ‘client_format_id_table’
131 | uint32_t client_format_id_table[RDP_NUM_CLIPBOARD_FORMATS];
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As things are, even when mode=current is specified on the .ini file,
a full modeset is needed (and done), which causes a very noticeable
screen blinking. That is because setting the max_bpc on a connector
needs full modesetting.
The idea here is that if mode=current on the .ini, no modesetting
should be done, so the current max_bpc is programmed into the
connector.
But if a custom max-bpc=... is specified, that will be used instead,
even if mode=current on the .ini
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/660
Signed-off-by: vanfanel <redwindwanderer@gmail.com>
With commit 'Move libweston-desktop into libweston' we've moved out
libweston-desktop DSO into libweston. Move also the header to
libweston/desktop.
This removes removes the libweston-desktop pc file and bumps libweston
major version to 12.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Surface views that are not assigned to a layer are not going to be
rendered, and thus should not participate in determining the outputs the
surface is on.
There are other view properties that may determine if the view should be
considered in output_mask calculations, e.g., is_mapped, but checking
for this currently breaks tests. Such additional checks are left for
future fixes or reworkings of the view infrastructure.
Fixes#646
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Tracking correctly previous events shouldn't corrupt the surface destroy
signal list. This enforces that by ensuring that we wouldn't have
a .notify wl_listener still being set (which shouldn't happen if we do
eventually get a focus_in event that clears it out).
Suggested-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Rather than doing it with a local variable, track any previous events by
hanging it out of the x11 backend and use it to handle keymap notify
events.
In this way we avoid corrupting the surface destroy signal list, in
notify_keyboard_focus_out(), ultimately leading to a crash.
Fixes#649, #650
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Reported-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The planes in the plane_list must be sorted from largest zpos_max to smallest.
Currently the plane order is only correct when the planes are already ordered
and added starting with the smallest zpos_max. This works accidentally in most
cases because the primary plane is usually first and there is often only one
overlay plane or the zpos is sufficiantly configurable.
To fix this, insert a new plane before the first plane with a smaller zpos_max.
And if none is found, insert it at the end of the list.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
With the help of a newly introduced function, weston_desktop_surface_set_orientation(),
this patch adds missing tiled states from the xdg-shell protocol.
The orientation state is passed on as a bitmask enumeration flag, which the
shell can set, allowing multiple tiling states at once.
These new states are incorporated the same way as the others, retaining
the set state, but also avoiding sending new configure events if nothing
changed since previously acked data.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Changing the mode will destoy the GBM surface for the output. As a result all
corresponding BOs are deleted regardless of the drm_fb refcount.
While a commit is pending, the last_state may contain a reference to such a BO.
So delay the mode switch until the commit is finished and the reference is
release.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
weston_output_set_position() currently assumes the output is enabled, but
we could be using weston_output_move() to configure an output that hasn't
yet been enabled.
If that's the case, we don't want to send signals or perform setup that
will eventually happen when the output is enabled anyway.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Make sure we don't enable an output that overlaps with other enabled
outputs.
We should probably do something similar when moving outputs, but we can't
realistically do that right now, so at least leave a comment explaining
why we're ignoring that case.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This is pretty counter-intuitive, and should probably happen outside of
the core in the front end while configuring the outputs.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
When an atomic commit fails then the output will be stuck in
REPAINT_AWAITING_COMPLETION state. It is waiting for a vblank event that was
never scheduled.
If the error is EBUSY then it can be expected to be a transient error. So
propagate the error and schedule a new repaint in the core compositor.
This is necessary because there are some circumstances when the commit can fail
unexpectedly:
- With 'state_invalid == true' one commit will disable all planes. If another
commit for a different output is triggered immediately afterwards, then this
commit can temporarily fail with EBUSY because it tries to use the same
planes.
- At least with i915, if one commit enables an output then a second commit for a
different output immediately afterwards can temporarily fail with EBUSY. This
is probably caused by some hardware interdependency.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
As wayland-backend is blitting the output decorations into the output
buffer itself, it pretends towards the pixman-renderer that there is no
decorations area. The pixman_image_create_bits() call wraps the
previously allocated buffer with an offset so that pixman-renderer will
paint in the right position.
The bug is that this pixman image was using the original buffer width
and height, instead of the composited area width and height. So the
pixman image looks too big to pixman-renderer, but the renderer didn't
care. The image being too big does risk access out of bounds in
pixman-renderer.
I found this when I was making renderers explicitly aware of the
frambuffer size and resizing, added asserts, and they surprisingly
failed. This fixes that.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The GL format and type are already recorded with pixel_format_info, use
that instead of a switch on Pixman formats.
Less special-casing, less dependency on Pixman formats.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Everywhere we are standardising to drm_fourcc.h pixel format codes, and
using struct pixel_format_info as a general handle that allows us to
access the equivalent format in various APIs. In the name of
standardisation, convert weston_compositor::read_format to
pixel_format_info.
Pixman formats are defined CPU-endian, while DRM formats are defined
always little-endian. OpenGL has various definitions. Correctly mapping
between these when the CPU is big-endian is an extra chore we can
hopefully offload to pixel-formats.c.
GL-renderer read_format is still defined based on Pixman format, because
of the pecualiar way OpenGL defines a pixel format with
GL_UNSIGNED_BYTE. That matches the same Pixman format on big-endian but
not the same drm_fourcc.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Sometimes you will have a pixman_image_t and you need the corresponding
drm_fourcc format.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
A following patch is going to need the introduced 'area' and 'fb_size'
variables. Until then though, a little hack is needed to avoid no-gl
builds failing with error: variable 'fb_size' set but not used.
While starting to use struct weston_geometry, convert also the input and
opaque regions to use it. This shortens and simplifies the code, as we
can drop the roughly duplicate code of doing stuff for with vs. without
a frame.
No change in behavior, this is pure refactoring.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Pixman image formats are CPU-endianess dependent while drm_fourcc are
not. Standardise around drm_fourcc because DRM-backend uses them anyway.
This also makes Pixman-renderer use the same format as GL-renderer will
prefer on headless.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This allows for setting a buffer offset without having to make it part
of the wl_surface.attach request. This is useful for e.g. setting a DND
surface icon hotspot offset when using Vulkan; or doing the same with
EGL without having to use wl_egl_window_resize().
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
In the future we'll have multiple output support, which makes storing
the peer list on an output rather tricky.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The paint_node_z_order_list contains all views, not just the ones visible on the
current output. So all views are moved to the primary plane when one output
does not support planes.
This will be relevant with multiple backends: When an output without plane
support is rendered then the views of all other outputs are removed from
the current planes and the corresponding outputs will be repainted
unnecessarily.
So only reset the plane if the view is actually on the current output.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
It is only enabled by a debug key binding, currently not tested at all,
and is seems it doesn't really work, so let's remove it. This also
removes it from the man page.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
A head may have its output protection set before it is attached to an
output. Recompute the output protection whenever a head is attached to
make sure it correctly set in output.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
This skips over xdg-shell v4, which can be implemented with no changes
as it's just another optional event.
v5 adds a capabilities event, which we send to inform clients of the
window manager's capabilities.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This protocol allows clients to create single-pixel RGBA buffers. Now
that we have proper support for these buffers internally within Weston,
we can expose them to clients.
This bumps the build container version, as we now depend on
wayland-protocols v1.26.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This patch acts as bandaid in the core compositor to avoid the renderer
doing a flush after the buffer has been released. Flushing after release
can happen due to problems in the internal damage tracking, is violating
the protocol, and causes visible glitches.
A more proper fix would be to handle compositor side damage correctly.
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Stone <daniel.stone@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Since b38b735e20, 'backend-drm: Remove Pixman conditional
for keep_buffer' the Pixman renderer keeps its own reference to buffers
when attached to surfaces, rather than flipping keep_buffer variable for
the surface. Problem is that when switching from the Pixman render to
the GL would not work and could result in a crash upon first repaint.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
When an output is destroyed then the output state is freed immediately. In this
case, the plane state is only partially destroyed because it is the currently
active state. This includes the buffer reference.
Without the output, the plane will not be updated any more until it is used by a
different output (if possible) or the output returns and the plane is used
again.
As a result, the buffer reference is kept for a long time. This will cause some
applications to stall because weston now keeps two buffers (the one here and
another one for a different output where the application is now displayed).
To avoid this, do a synchronous commit that disables the output. The output
needs to be disabled anyways and this way the current state contains no
buffers that would remain.
`device->state_invalid = true` in drm_output_detach_crtc() is no longer
needed, because drm_output_detach_crtc() is called only when initialization
failed and the crtc was not yet used or in drm_output_deinit() when the
crtc was already disabled with the new synchronous commit.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Introduced with e0a858a5f2, commit 'weston-debug: Introduce
weston_log_subscription and weston_log_subscriber objects'. We don't
really return a weston_log_subscription so let's remove it.
Some newer doxygen detects this and we are treating warning as errors.
Fixes#594
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This was introduced in a partial MR, where the later commits in the new
multi-GPU MR fully fix it, but the initially cherry-picked ones don't.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We were only destroying these when the parent display removed the output
global. Do it on shutdown too, so we can avoid leaking it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We're going to need this to properly send xwayland events later, so add
API to get the current x,y co-ordinates of a shell surface and add it to
the kiosk and desktop shells.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
noop-renderer needs to actually access the buffer content, to ensure
that the bad-buffer test works. This was previously done using a
volatile variable, but clang rightly pointed out that the variable
access had no effect (since the volatile stack variable was never read
from, and the source is not volatile), so 9b0b5b57dd changed it to be
explicitly marked it as unused to suppress the compiler warning.
Unfortunately suppressing the warning still leaves the compiler free to
optimise out the access.
Replace the variable decorations with actually using the result of the
read, so we can be really sure that it's never going to be optimised
away.
Signed-off-by: Daniel Stone <daniels@collabora.com>
ca9bb01fe6 made it so that we already set shm_buffer, width, height,
etc, in the core. There's no need for the renderer to do this.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Our positioning of override redirect windows falls apart when an
app is on the fullscreen layer, because we end up putting its
menus and tooltips beneath it. This patch raises the special
override redirect layer to be just below things like on-screen
keyboards (and, unfortunately, above things like panels).
There is no perfect way to deal with this problem, especially
for content like tooltips that don't come with transience hints.
In some cases override redirect menus could be better placed by
using the parenting/transience information provided with them
at map time, and we should probably do that at some point, but
that would still leave us with tooltips below full screen
applications, and the need for this layer change.
based on a patch
Co-authored-by: Hideyuki Nagase <hideyukn@microsoft.com>
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
I changed the layer position and the comments, so:
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
It's not really useful to have libweston without libweston-desktop. It's
also very little code.
Merging both into the same DSO will allow us to cut out a bunch of
indirection and pain.
Signed-off-by: Daniel Stone <daniels@collabora.com>
A view shouldn't be mapped if a surface isn't mapped, and it shouldn't
be in the scene graph if it isn't mapped either. Print when this happens
so you can see more from the debug.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently the idle_repaint_source is removed when the output is destroyed.
This covers the most common case: When a monitor is unplugged then the
corresponding DRM output is destroyed and not just disabled.
However, outputs can be explicitly disabled by the shell. In this case the
output is not removed and idle_repaint() may be called for a removed
output.
Remove the idle_repaint_source in weston_compositor_remove_output() to fix
this. And reset the variable to ensure that the source can be created
again.
Removing the source in weston_output_release() is now no longer necessary
since it calls weston_compositor_remove_output().
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
weston_compositor_reflow_outputs() assumes that all output are positioned from
left to right with no gaps in the same order in which they where created.
If the shell moves an output with weston_output_move() then this assumption is
no longer true. So stop reflowing the outputs in the case. The shell is now
responsible for positioning all outputs as needed.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
This is another followup to ffc011d6a3
("backend-drm: check that outputs and heads are in fact ours") which missed
some places.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
By moving the application of view_alpha after pre-multiplication we can
simplify main() considerably.
The cost is that for straight-alpha input or color_pipeline() we might
be doing three multiplications more than before. However,
a) the cost of running color_pipeline() probably dominates anyway, and
b) to get straight-alpha input you have to use a future Wayland
extension that probably won't be advertised without color management.
So we keep the optimization for the simple case (no color management)
while potentially incurring a small cost on the heavy case (with color
management).
Thanks to Pierre-Yves Mordred for the inspiration in
https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/889#note_1411774
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that we have the if-else ladder to call color_pipeline() only when
necessary, and since only color_pipeline() needs undo-premult, move
undo-premult into color_pipeline().
This is a small step towards improving code readability.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We always talk about "view alpha", so the name variable in the fragment
shader the same. Now it's clear without the comments, making the code
easier to read overall.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
There is missing dependency on linux-dmabuf-unstable-v1-server-protocol.h
header file in backend-headless, backend-drm and backend-x11. That files
do not depend on that header, in fact. But by this moment they've had
that implicit dependency due to linux-dmabuf.h header.
With specific set of meson configure options the protocol header is not
generated at the right time, what causes build error in 100% cases using
small amount of building threads (from -j1 to -j8).
Signed-off-by: Ivan Nikolaenko <ivan.nikolaenko@unikie.com>
This is a followup to ffc011d6a3
("backend-drm: check that outputs and heads are in fact ours") which missed
some places.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
This uses the legacy DRM API it incomplete and no longer works anyways.
At this point, weston is no longer DRM master, so these calls fail with
"Permission denied".
So just remove the corresponding code.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
If a surface or a view is not mapped, then we should not be trying to
paint it. Check if this is the case and ensure that we only insert
paint nodes for mapped surfaces & views.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: #621
Now we've got a wrapper which tells us whether or not the surface has
valid content, use it.
The 'XXX' comment was removed because it's the same pattern as every
other surface-role implementor: if the surface is not mapped but does
have valid content, then map it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
"max bpc" property is meant for working around faulty sink hardware.
Normally it should be set to the maximum possible value so that the
kernel driver has full freedom to choose the link bpc without being
artificially forced to lower color precision.
The default value is 16 because that is a nice round number and more
than any link technology I've heard is using today which would be 12.
Also offer an API set the value, so that weston.ini could be used in the
next patch for sink workaround purposes.
Closes: https://gitlab.freedesktop.org/wayland/weston/-/issues/612
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Add a struct weston_head parameter to weston_compositor_create_output()
and fold weston_compositor_create_output_with_head() into it.
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
As a first step towards heterogeneous outputs, ignore other backends'
heads and outputs. This is done by checking the destroy callbacks for
heads and outputs.
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
As a first step towards heterogeneous outputs, ignore other backends'
heads and outputs. This is done by checking the destroy callbacks for
heads and outputs.
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
As a first step towards heterogeneous outputs, ignore other backends'
heads and outputs. This is done by checking the destroy callbacks for
heads and outputs.
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
As a first step towards heterogeneous outputs, ignore other backends'
heads and outputs. This is done by checking the destroy callbacks for
heads and outputs.
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
As a first step towards heterogeneous outputs, ignore other backends'
heads and outputs. This is done by checking the destroy callbacks for
heads and outputs.
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Stop plugins from overwriting the struct weston_output::destroy vfunc,
as that will be used by backends to recognize their outputs.
Instead, pass a plugin-specific destroy callback when creating the
virtual output.
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The get file descriptor functions are being deprecated and a two step
process of getting handles and then getting the descriptors for the
handles is being used instead.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Update to a newer FreeRDP release so we can start cleaning up
some of our usage of things that will be deprecated in the next
major release.
For this, I've simply picked the newest version currently in
our CI images.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This reverts commit 6914064066.
This is a follow-up change of b623fd2a ("drm-backend: stop parsing IN_FORMATS
blobs, use libdrm instead"). Weston now has a hard-requirement on libdrm
2.4.108, clean up remaining and unnecessary conditional code. Change 69140640
("backend-drm: add HDR_OUTPUT_METADATA definitions") is no longer needed
and stop including libdrm-updates.h from kms-color.c.
Signed-off-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Before this change the drm-backend in Weston did the work of parsing DRM
blobs in order to query IN_FORMATS data, if available. This is also the
case for other DRM/KMS clients that use IN_FORMATS (i.e. X).
libdrm 2.4.108 with e641e2a6 ("xf86drm: add iterator API for DRM/KMS
IN_FORMATS blobs") introduced a dedicated API for querying IN_FORMATS data.
Bump the minimum required version to 2.4.108, stop parsing IN_FORMATS in
Weston and start using DRM iterators. In addition, remove fallback code for
libdrm <2.4.107.
Signed-off-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
This patch makes sure we have a gl_buffer_state present when using
direct-display protocol extensions (which forbids any GL imports, and
assumes a direct path with the display unit to perform a KMS import).
Without this patch we would basically have no gl_buffer_state at repaint
time because we never manged to create one, as direct-display code path
will return much early.
Partially fixes gitlab.freedesktop.org/wayland/weston/-/issues/621.
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
It's bad form to set the same variable in multiple places, and not all
of them were even equivalent.
Move lcms2 finding to the root level build file only. It is still an
optional dependency like before, and the if-not-found checks are still
in place where actually needed.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When color management is disabled, the fragment shader was still first
ensuring straight alpha and then immediately just going back to
pre-multiplied. This is near-impossible for a shader compiler to
optimize out, I guess because of the if-statement to handle division by
zero. Having view alpha applied in between certainly didn't make it
easier.
That causes extra fragment computations that are unnecessary. In the
issue report this was found to cause a notable performance regression.
Fix the performance regression by introducing special-case paths for
when straight alpha is not needed. This skips the unnecessary
computations.
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/623
Fixes: 9a6a4e7032
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Currently, the opaque is discarded for all transformations other than a simple
translation, because correctly transforming the opaque area is not possible in
general.
However, there is one simple case that is probably the most common one: A fully
opaque surface that is translated and scaled. In this case the opaque area is
simply the new bounding box. So set the transformed opaque area accordingly.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
If surface->is_opaque is set then we can assume that the whole surface is
opaque. In the trivial case (no transformation or translation only) this means
that transform.boundingbox is exactly the view area and is fully opaque. So it
can be used for transform.opaque.
This is important because damage calculation uses transform.opaque. Without
this, anything underneath a surface without an explicit opaque region but a
pixel format without alpha channel is drawn unnecessarily.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
The drm_device is initialized as a side effect of the (badly named)
drm_device_is_kms function. Explicitly pass the drm_device to be able to
initialize kms devices that are not the main drm device of the drm backend.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
If we have multiple drm devices, we cannot use the drm device from the backend,
because we would only get the primary device and not the device of the output.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
If Weston receives a hotplug event, it has to check if the hotplug device
actually belongs to the drm device before updating the heads of the device. The
hotplug event should only remove heads that belong to the device and must not
change heads of other devices.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The compositor lists the heads from all devices, but we must only disable the
connectors that belong to the current device. Therefore, other heads must be
ignored.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The outputs, heads, crtcs, and connectors are specific to a drm device and not
the backend in general.
Link them to the device that they belong to to be able to retrieve the
respective device.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The commits happen per device instead of per backend. The pending state is
therefore per device as well. Allow to retrieve the device from the pending
state.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The scanout format for the dma-buf feedback are specific to the kms device that
is used for scanout. Therefore, we have to pass the device of the output when
retrieving the scanout formats.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The fbs are specific to the device on which they will be displayed. Therefore,
we have to tell which device shall be used when we are creating the fb.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The atomic commit is device specific. If we have multiple kms devices, we need
to know which device was used for the atomic commit.
Pass the device instead of the backend through the atomic commit.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Extract the kms device from the backend to allow a better separation of the
backend and the kms device. This will allow to handle multiple kms devices with
a single drm backend.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Get the backend at the beginning of the function instead of retrieving it from
another object in the debug statement. This simplifies refactoring, as the debug
statement is not affected by changes how the backend is retrieved.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The gbm_format is the same as the drm format used by the pixel format.
Print the format name using the pixel format in the error message to make the
error message easier to understand for humans.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The fb already contains a DRM fd for later use. So just use that one instead of
fetching it from the backend.
This is necessary if the fbs are allocated on different devices, since otherwise
the wrong device might be used to get the fd of the passed fb.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Looks like we missed this one during the conversion to
weston_signal_emit_mutable.
Found by running weston under valgrind and running/killing
weston-simple-dmabuf-egl
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The RDP spec says we can trust x, y position on all messages except
PTR_FLAGS_WHEEL and PTR_FLAGS_HWHEEL, so let's do that to ensure
proper sync with the RDP client.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
And use it to get a feedback event for when adding scanout tranche.
With this change, I get back a feedback event for dmabuf-feedback
on VC4:
���� tranche: target device /dev/dri/card0, scanout
� ���� format ABGR2101010, modifier LINEAR (0x0)
� ���� format XBGR2101010, modifier LINEAR (0x0)
� ���� format ARGB8888, modifier LINEAR (0x0)
� ���� format ABGR8888, modifier LINEAR (0x0)
� ���� format XRGB8888, modifier LINEAR (0x0)
� ���� format XBGR8888, modifier LINEAR (0x0)
� ���� format RGB565, modifier LINEAR (0x0)
� ���� format YUV420, modifier LINEAR (0x0)
� ���� format YUV422, modifier LINEAR (0x0)
� ���� format YVU420, modifier LINEAR (0x0)
� ���� format YVU422, modifier LINEAR (0x0)
� ���� format NV12, modifier LINEAR (0x0)
� ���� format NV12, modifier BROADCOM_SAND128 (0x700000000000004)
� ���� format NV16, modifier LINEAR (0x0)
� ���� end of tranche
Besides that, it can place a fullscreen state of simple-egl on the
primary plane, which without this change wasn't possible.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Obviously the first allocation is always leaked, there is a second
zalloc() right below. Fix the leak.
Found by code inspection.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
As we could have situations where dmabuf import failed when attempting
to figure it the framebuffer is scanout-capable, make sure we also have
a way to store that information. Otherwise, we could end up
NULL-dereferencing, as we don't provide a valid storage for it.
Further more, with this, we also print out the reason why it failed, to
aid in further debugging.
Observed on platforms where GBM_BO_HANDLE failed + in combination w/
direct-display proto extension.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Output color profile may be changed in flight. Output basic color
characteristics and EOTF mode cannot yet be changed in flight, but it is
reasonable to assume they could in the future. Therefore the color
outcome data may change in flight as well, which is the basis for HDR
metadata, which needs to be updated as well.
Track the changes to color outcome data with a serial number.
DRM-backend checks the serial number to see if it needs to re-create the
HDR metadata blob. This allows the changes to propagate all the way to
KMS.
The code added here is more of a reminder of what should happen than a
tested path.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Forward the HDR Static Metadata Type 1 to the video sink. This makes the
sink aware of our video content parameters and may be able to produce a
better picture. This type of metadata is used only with the ST 2084 HDR
mode a.k.a PQ.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This creates a new file for KMS related color code, to avoid making
drm.c even longer.
The moved code was just added in 5151f9fe9e
so the new file copyrights are written based on that.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
'color_characteristics_config_error' test ensures that all code paths in
parse_color_characteristics() and wet_output_set_color_characteristics()
get exercised. The return value and logged error messages are checked.
Other cases test the weston_hdr_metadata_type1 validation.
These are for the sake of test coverage, but also an example of how to
test a function from main.c, and how to capture messages from
weston_log().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is the beginnings of creating composited content HDR metadata for
the ST2084 HDR mode. The immediate goal is to allow essentially setting
the HDR metadata from weston.ini, so that it can be experimented with.
Setting an output ICC profile will stop weston.ini metadata from taking
effect, but using an ICC profile in HDR mode is an open question anyway.
maxDML, maxCLL, and minDML are set based on the assumption that we want
to make use of the full sink/monitor dynamic range.
This also adds several TODOs about how we should handle output profiles,
basic output color characteristics, and HDR metadata. Implementing these
properly will take more thought and effort.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds hdr_meta field in weston_output_color_outcome. This field is
intended to be set by color manager modules, and read by backends which
will send the information to the video sink in SMPTE ST 2084 mode a.k.a
Perceptual Quantizer HDR system.
Such metadata is essential in ST 2084 mode for the video sink to produce
a good picture.
The validation of the data and the group split is based on the HDR
Static Metata Type 1 definition in CTA-861-G specification.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds color_chracteristics field in weston_output. This field is
intended to be set by compositor frontends and read by color managers.
Color managers can use this information when choosing the output color
space and dynamic range, particularly when no ICC profile has been set.
This is most useful for HDR outputs, where the HDR static metadata for
PQ mode or the display luminance parameters for HLG mode can be based on
color_characteristics.
The fields of weston_color_characteristics mirror the information
available in EDID. However, using EDID information as-is has several
caveats, so the decision to use EDID for this is left for the frontend
and ultimately to the end user.
There are no defined ranges or validity checks for this data. The color
manager will have to validate the values against whatever it is using
them for.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Allow the front end to register audio setup and teardown functions. These
functions should use FreeRDP's rdpsnd_server_context or
audin_server_context and set up their own handler threads.
The backend remains mostly ignorant to any audio details beyond setting up
and tearing down.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Instead of a meson option or hidden define, just run these checks always.
It is not Weston's style to add build options for specific asserts, and
currently weston's codebase is expected to always run with asserts
enabled.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
It's three planes, not two.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 8b167a1703 ("gl-renderer: Store EGL buffer state in weston_buffer")
There's just no good reason to do this.
The query entrypoints already tell us if we need to use
GL_TEXTURE_EXTERNAL_OES for a particular format/modifier. We also have
RGB -> YUV fallbacks which should be able to work well with TEXTURE_2D.
TEXTURE_EXTERNAL pessimises quite hard, forcing GPU-side reloads as well
as bad filtering. Allowing multi-planar formats to use TEXTURE_2D should
thus result in performance and quality improvements.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Now that we can pull everything we need from pixel-formats, go one step
further and reuse the same YUV format descriptors we use to emulate
dmabuf/EGLImage imports for SHM.
This eliminates all special-case YUV/SHM handling.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add a new hide_from_clients flag which, if set, specifies that the
format is only for internal information and processing, and should not
be advertised for clients.
This will be used for formats like R8 and GR88, which are not useful for
client buffers, but are used internally to implement YUV -> RGB
conversion.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We support this as an explicit YUV fallback path in gl-renderer's dmabuf
EGLImage import path, so might as well support it in the SHM path, given
it's just YUV420 with no subsampling.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If we're doing partial uploads from SHM buffers, we need to use the
vertical subsampling factor rather than the horizontal for secondary
planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We already had these with effective width and height, but they're useful
externally as well. Pull them out to a helper.
Signed-off-by: Daniel Stone <daniels@collabora.com>
'depth' isn't actually used to determine the bit depth of meaningful
components generally, but specifically to determine whether we can use
the legacy drmModeAddFB (pre-AddFB2) with those formats.
Rename the member to make it more clear what it's used for.
Signed-off-by: Daniel Stone <daniels@collabora.com>
pixel-formats already stores the gl_format, at least for single-planar
formats; use that instead of storing our own copies.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Instead of checking for each format whether we need compatibility
workarounds for GL implementations not supporting ES3.x or when
GL_EXT_texture_rg isn't present, have each format declare the ideal case
and fix it up later.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Rather than checking all the pixel-format components which are currently
duplicated inside gl-renderer, just check for equality of the pixel
format itself, which will become useful as we remove some of the
duplicate content.
This means that the texture storage will now be reallocated when clients
switch between pixel formats which could've had compatible GL storage
(e.g. XRGB <-> ARGB) on the same surface. However this does not seem
like a case worth optimising, and simplifies the code somewhat.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We've got a nice shiny ARRAY_COPY macro, so use it rather than memcpy or
hand-unrolled assignments.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Allow clipboard pasting in and out of an RDP session.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
RDP exposes certain features (audio, clipboard, RAIL) through a facility
called "virtual channels". Set up the communications framework for using
these.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
FreeRDP has some features that start new threads and run
callback functions in them.
We need a way to punt work from these threads back to the
compositor thread.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Log EGL features similar to how GL ES features are logged: listing just
the ones weston tests for.
This replaces some log messages from gl-renderer.c that become
redundant or belong with EGL better.
has_native_fence_sync and has_wait_sync are not logged, because missing
them already logs warnings.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Feels like this might be nice to log.
The failure case is not fatal, so say it's a warning only.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is a human readable replacement for printing out the list of all
available GL extensions that doesn't happen anymore by default.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Print all EGL and OpenGL extension lists into a new log scope
"gl-renderer" instead of the usual log.
These lists cluttered the log while they were very rarely actually
useful. Sometimes they might be interesting, so make them still
available through the new log scope.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Plumb struct gl_renderer all the way through to
gl_renderer_log_extensions(). In the future, the extension lists will be
printed into a debug scope specifically, and it will get the debug scope
from gr.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that the gl_buffer_state owns everything related to buffers, move
the textures from there rather than living on the surface, to join the
EGLImage and/or SHM params.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Now that EGLImages are strongly associated with a gl_buffer_state, which
has a lifetime strictly bounded by a weston_buffer, we don't need to
have an egl_image wrapper having its own separate refcounting anymore.
Signed-off-by: Daniel Stone <daniels@collabora.com>
... apart from SHM.
EGL and dmabuf buffers already have a gl_buffer_state created for them
when we first attach the weston_buffer. By turning
gl_surface_state::buffer into a pointer, we can just reference rather
than inline the gl_buffer_state.
SHM buffers are special, in that we don't keep individual copies of them
within the GL renderer. Instead, the GL surface has a texture allocated
with a shadow copy of the most up-to-date surface content. Handle this
by allocating and destroying gl_buffer_state every time we need to
respecify textures or somehow meaningfully change the parameters.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Similarly to EGL buffers, store the gl_buffer_state for a dmabuf buffer
inside weston_buffer, rather than on the linux_dmabuf_buffer. This
slightly simplifies our gl_buffer_state handling, and will be used later
to eliminate the egl_image refcounting.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Introduce a renderer_private hook for weston_buffer, and use this to
store a copy of the gl_buffer_state for EGL buffers (i.e. non-dmabuf, via
EGL_WL_bind_wayland_display).
As part of this, we create the EGLImage along with the weston_buffer
information, and just take a reference to it each time it is attached.
If you have bisected a failure to update surface content to this commit,
it very likely means that your EGL implementation requires images to be
recreated rather than only rebound in order to have their content
updated, which is contrary to specification.
Signed-off-by: Daniel Stone <daniels@collabora.com>
At the moment, attach_shm() will modify the gl_buffer_state in place,
then compare it and see if it differs enough to require a new one. That
rather mixes up the old and new worlds, so quite explicitly build up a
shadow gl_buffer_state with variables first before we change the one
which already exists.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Now that we can reliably access buffer dimensions from weston_buffer,
and gl-renderer isn't doing strange things with buffer widths, just use
that. The renderer interface is now unused and can be deleted.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This was only used for what was presumably an attempt at an
optimisation, to force the texture's pitch in pixels to match the SHM
buffer. This is really unlikely to have ever made a difference, given
the alignments GPUs demand.
Signed-off-by: Daniel Stone <daniels@collabora.com>
It's just a shadow of weston_buffer.buffer_origin, which also has a
slightly more descriptive name.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If we can reuse the textures we already have, just return early, rather
than putting all the work in a large indented body.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Allow the various attach handlers to access the existing buffer, only
referencing the new buffer when they have successfully attached.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Deduplicate the no-buffer and the import-fail case, and try to fall
through where we can. This will make it easier to shift the buffer
reference change later, so the attach subhandlers can reference the old
buffer when checking for compatibility.
Signed-off-by: Daniel Stone <daniels@collabora.com>
It's good to know if we succeeded or failed to import our buffers. This
will also later make for a more smooth transition when we start
returning a gl_buffer_state from them.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This only happens for the legacy renderer, but still, might as well
clean up after ourselves when we can't import a secondary plane.
Signed-off-by: Daniel Stone <daniels@collabora.com>
gl_surface_state has a bunch of members which are tied to the input
buffer, rather than the surface per se.
Split them out into a separate gl_buffer_state member as a first step
towards sanitising its use and lifetime.
Signed-off-by: Daniel Stone <daniels@collabora.com>
No-one should be implementing an external renderer, so move the
interface out of the public header.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This value is always `NULL`.
Silences:
`warning: ‘%s’ directive argument is null [-Wformat-overflow=]`
Signed-off-by: Robert Mader <robert.mader@collabora.com>
clang-13 complains about bitwise xor assigments like the following:
../libweston/noop-renderer.c:62:25: warning: variable 'unused' set but
not used [-Wunused-but-set-variable] volatile unsigned char unused = 0;
Use the __attribute__((unused)) instead.
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Similar to how we do it with drm_fb ref counts, increase a reference
count and return the same object.
Plug-in in desktop-shell when we map up the view in order to survive a
weston_surface destruction.
Astute readers will notice that this patch removes weston_view_destroy()
while keeping the balance between removing and adding a
weston_surface_unref() call in desktop_shell_destroy_surface().
The reason is to let weston_surface_unref() handle destruction on its
own. If multiple references are taken, then weston_surface_unref()
doesn't destroy the view, it just decreases the reference, with
a latter call to weston_surface_unref() to determine if the view
should be destroyed as well. This situation happens if we have
close animation enabled, were we have more than one reference taken: one
when mapping the view/surface and when when the surface itself was created,
(what we call, a weak reference).
If only a single reference is taken (for instance if we don't have close
animations enabled) then this weston_surface_unref()
call is inert as that reference is not set-up, leaving libweston to
handle the view destruction.
Following that with a weston_view_destroy() explicit call would cause a
UAF as the view was previous destroyed by a weston_surface_unref() call.
A side-effect of not keeping the weston_view_destroy() call would
happen when tearing down the compositor. If close animations are enabled,
weston_surface_unref() would not destroy the view, and because
weston_view_destroy() no longer exists, we would still have the
view in the other layers by the time we check-up if layers
have views present.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Calling weston_surface_unref() one time too many could be a sign we
haven't correctly increased the ref count for it.
Also, if we don't have a surface being passed, do no attempt to
use it.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Make it obvious that weston_surface has a reference counting happening
and destruction of the weston_surface happens when the last
weston_surface reference has been accounted for.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Unconditionally creating a surface feedback for each surface
creates unnecessary overhead and noise in the logs. Thus
create it when the first surface feedback resource for a
surface is requested and delete it again once all those
resources have been destroyed.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
