Add the following feature bits.
no-nested-data-bp : Processor ignores nested data breakpoints.
lfence-always-serializing : LFENCE instruction is always serializing.
null-sel-cls-base : Null Selector Clears Base. When this bit is
set, a null segment load clears the segment base.
The documentation for the features are available in the links below.
a. Processor Programming Reference (PPR) for AMD Family 19h Model 01h,
Revision B1 Processors
b. AMD64 Architecture Programmer’s Manual Volumes 1–5 Publication No. Revision
40332 4.05 Date October 2022
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip
Link: https://www.amd.com/system/files/TechDocs/40332_4.05.pdf
Message-Id: <20230504205313.225073-5-babu.moger@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the following feature bits.
amd-psfd : Predictive Store Forwarding Disable:
PSF is a hardware-based micro-architectural optimization
designed to improve the performance of code execution by
predicting address dependencies between loads and stores.
While SSBD (Speculative Store Bypass Disable) disables both
PSF and speculative store bypass, PSFD only disables PSF.
PSFD may be desirable for the software which is concerned
with the speculative behavior of PSF but desires a smaller
performance impact than setting SSBD.
Depends on the following kernel commit:
b73a54321ad8 ("KVM: x86: Expose Predictive Store Forwarding Disable")
stibp-always-on :
Single Thread Indirect Branch Prediction mode has enhanced
performance and may be left always on.
The documentation for the features are available in the links below.
a. Processor Programming Reference (PPR) for AMD Family 19h Model 01h,
Revision B1 Processors
b. SECURITY ANALYSIS OF AMD PREDICTIVE STORE FORWARDING
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://www.amd.com/system/files/documents/security-analysis-predictive-store-forwarding.pdf
Link: https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip
Message-Id: <20230504205313.225073-4-babu.moger@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce new EPYC cpu versions: EPYC-v4 and EPYC-Rome-v3.
The only difference vs. older models is an updated cache_info with
the 'complex_indexing' bit unset, since this bit is not currently
defined for AMD and may cause problems should it be used for
something else in the future. Setting this bit will also cause
CPUID validation failures when running SEV-SNP guests.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230504205313.225073-3-babu.moger@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
New EPYC CPUs versions require small changes to their cache_info's.
Because current QEMU x86 CPU definition does not support versioned
cach_info, we would have to declare a new CPU type for each such case.
To avoid the dup work, add "cache_info" in X86CPUVersionDefinition",
to allow new cache_info pointers to be specified for a new CPU version.
Co-developed-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230504205313.225073-2-babu.moger@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-45-gaosong@loongson.cn>
Introduce set_fpr() and get_fpr() and remove cpu_fpr.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-44-gaosong@loongson.cn>
This patch includes:
- VLDI.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-43-gaosong@loongson.cn>
This patch includes:
- VFCMP.cond.{S/D}.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-37-gaosong@loongson.cn>
This patch includes:
- VFRSTP[I].{B/H}.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-33-gaosong@loongson.cn>
This patch includes:
- VPCNT.{B/H/W/D}.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-31-gaosong@loongson.cn>
This patch includes:
- VSIGNCOV.{B/H/W/D}.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-20-gaosong@loongson.cn>
This patch includes:
- VSAT.{B/H/W/D}[U].
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-18-gaosong@loongson.cn>
This patch includes:
- VADDA.{B/H/W/D}.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-13-gaosong@loongson.cn>
This patch includes:
- VABSD.{B/H/W/D}[U].
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-12-gaosong@loongson.cn>
This patch includes;
- VNEG.{B/H/W/D}.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-7-gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-4-gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-3-gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230504122810.4094787-2-gaosong@loongson.cn>
This passes on the memop as given as argument to
helper_ld_asi to the ultimate load primitive.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert away from the old interface with the implicit
MemOp argument.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20230502135741.1158035-9-richard.henderson@linaro.org>
Convert away from the old interface with the implicit
MemOp argument.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230502135741.1158035-8-richard.henderson@linaro.org>
Convert away from the old interface with the implicit
MemOp argument.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230502135741.1158035-7-richard.henderson@linaro.org>
Convert away from the old interface with the implicit
MemOp argument.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230502135741.1158035-6-richard.henderson@linaro.org>
Convert away from the old interface with the implicit
MemOp argument.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230502135741.1158035-5-richard.henderson@linaro.org>
Convert away from the old interface with the implicit
MemOp argument. Importantly, this removes some incorrect
casts generated by idef-parser's gen_load().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230502135741.1158035-4-richard.henderson@linaro.org>
Convert away from the old interface with the implicit
MemOp argument. In this case we can fold the calls
using the size bits of MemOp.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230502135741.1158035-3-richard.henderson@linaro.org>
Convert away from the old interface with the implicit
MemOp argument.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230502135741.1158035-2-richard.henderson@linaro.org>
In function do_extractm() the mask is calculated as
dup_const(1 << (element_width - 1)). '1' being signed int
works fine for MO_8,16,32. For MO_64, on PPC64 host
this ends up becoming 0 on compilation. The vextractdm
uses MO_64, and it ends up having mask as 0.
Explicitly use 1ULL instead of signed int 1 like its
used everywhere else.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1536
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <168319292809.1159309.5817546227121323288.stgit@ltc-boston1.aus.stglabs.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The bits in cr reg are grouped into eight 4-bit fields represented
by env->crf[8] and the related calculations should be abstracted to
keep the calling routines simpler to read. This is a step towards
cleaning up the related/calling code for better readability.
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503093619.2530487-2-harshpb@linux.ibm.com>
[danielhb: add 'const' modifier to fix linux-user build]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add a virtual CPU for Ventana's first CPU named veyron-v1. It runs
exclusively for the rv64 target. It's tested with the 'virt' board.
CPU specs and general information can be found here:
https://www.nextplatform.com/2023/02/02/the-first-risc-v-shot-across-the-datacenter-bow/
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230418123624.16414-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the specification, in 64-bit, if any of the pte reserved bits
60-54 is set an exception should be triggered (see 4.4.1, "Addressing and
Memory Protection"). In addition, we must check the napot/pbmt bits are
not set if those extensions are not active.
Reported-by: Andrea Parri <andrea@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230420150220.60919-1-alexghiti@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Before changing the flow check for sv39/48/57.
According to specification (for Supervisor mode):
Sv39 implementations support a 39-bit virtual address space, divided into 4 KiB
pages.
Instruction fetch addresses and load and store effective addresses, which are
64 bits,
must have bits 63–39 all equal to bit 38, or else a page-fault exception will
occur.
Likewise for Sv48 and Sv57.
So the high bits are equal to bit 38 for sv39.
According to specification (for Hypervisor mode):
For Sv39x4, address bits of the guest physical address 63:41 must all be zeros,
or else a
guest-page-fault exception occurs.
Likewise for Sv48x4 and Sv57x4.
For Sv48x4 address bits 63:50 must all be zeros, or else a guest-page-fault
exception occurs.
For Sv57x4 address bits 63:59 must all be zeros, or else a guest-page-fault
exception occurs.
For example we are trying to access address 0xffff_ffff_ff01_0000 with only
G-translation enabled.
So expected behavior is to generate exception. But qemu doesn't generate such
exception.
For the old check, we get
va_bits == 41, mask == (1 << 24) - 1, masked_msbs == (0xffff_ffff_ff01_0000 >>
40) & mask == mask.
Accordingly, the condition masked_msbs != 0 && masked_msbs != mask is not
fulfilled
and the check passes.
Signed-off-by: Irina Ryapolova <irina.ryapolova@syntacore.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230418075423.26217-1-irina.ryapolova@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When reading a non-existent CSR QEMU should raise illegal instruction
exception, but currently it just exits due to the g_assert() check.
This actually reverts commit 0ee342256a.
Some comments are also added to indicate that predicate() must be
provided for an implemented CSR.
Reported-by: Fei Wu <fei2.wu@intel.com>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230417043054.3125614-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This new abstract type will be used to differentiate between static and
non-static CPUs in query-cpu-definitions.
All generic CPUs were changed to be of this type. Named CPUs are kept as
TYPE_RISCV_CPU and will still be considered static.
This is the output of query-cpu-definitions after this change for the
riscv64 target:
$ ./build/qemu-system-riscv64 -S -M virt -display none -qmp stdio
{"QMP": {"version": (...)}
{"execute": "qmp_capabilities", "arguments": {"enable": ["oob"]}}
{"return": {}}
{"execute": "query-cpu-definitions"}
{"return": [
{"name": "rv64", "typename": "rv64-riscv-cpu", "static": false, "deprecated": false},
{"name": "sifive-e51", "typename": "sifive-e51-riscv-cpu", "static": true, "deprecated": false},
{"name": "any", "typename": "any-riscv-cpu", "static": false, "deprecated": false},
{"name": "x-rv128", "typename": "x-rv128-riscv-cpu", "static": false, "deprecated": false},
{"name": "shakti-c", "typename": "shakti-c-riscv-cpu", "static": true, "deprecated": false},
{"name": "thead-c906", "typename": "thead-c906-riscv-cpu", "static": true, "deprecated": false},
{"name": "sifive-u54", "typename": "sifive-u54-riscv-cpu", "static": true, "deprecated": false}
]}
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230411183511.189632-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This command is used by tooling like libvirt to retrieve a list of
supported CPUs. Each entry returns a CpuDefinitionInfo object that
contains more information about each CPU.
This initial support includes only the name of the CPU and its typename.
Here's what the command produces for the riscv64 target:
$ ./build/qemu-system-riscv64 -S -M virt -display none -qmp stdio
{"QMP": {"version": (...)}
{"execute": "qmp_capabilities", "arguments": {"enable": ["oob"]}}
{"return": {}}
{"execute": "query-cpu-definitions"}
{"return": [
{"name": "rv64", "typename": "rv64-riscv-cpu", "static": false, "deprecated": false},
{"name": "sifive-e51", "typename": "sifive-e51-riscv-cpu", "static": false, "deprecated": false},
{"name": "any", "typename": "any-riscv-cpu", "static": false, "deprecated": false},
{"name": "x-rv128", "typename": "x-rv128-riscv-cpu", "static": false, "deprecated": false},
{"name": "shakti-c", "typename": "shakti-c-riscv-cpu", "static": false, "deprecated": false},
{"name": "thead-c906", "typename": "thead-c906-riscv-cpu", "static": false, "deprecated": false},
{"name": "sifive-u54", "typename": "sifive-u54-riscv-cpu", "static": false, "deprecated": false}]
}
Next patch will introduce a way to tell whether a given CPU is static or
not.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230411183511.189632-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QMP CPU commands are usually implemented by a separated file,
<arch>-qmp-cmds.c, to allow them to be build only for softmmu targets.
This file uses a CPU QOM header with basic QOM declarations for the
arch.
We'll introduce query-cpu-definitions for RISC-V CPUs in the next patch,
but first we need a cpu-qom.h header with the definitions of
TYPE_RISCV_CPU and RISCVCPUClass declarations. These were moved from
cpu.h to the new file, and cpu.h now includes "cpu-qom.h".
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230411183511.189632-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implement this by adjusting prot, which reduces the set of
checks required. This prevents exec to be set for U pages
in MMUIdx_S_SUM. While it had been technically incorrect,
it did not manifest as a bug, because we will never attempt
to execute from MMUIdx_S_SUM.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-26-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-26-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We were effectively computing the protection bits twice,
once while performing access checks and once while returning
the valid bits to the caller. Reorg so we do this once.
Move the computation of mxr close to its single use.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-25-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-25-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-24-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-24-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If we want to give the debugger a greater view of memory than
the cpu, we should simply disable the access check entirely,
not simply for this one corner case.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-23-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-23-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The debugger should not modify PTE_A or PTE_D.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-22-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-22-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the code that never loops outside of the loop.
Unchain the if-return-else statements.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-21-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-21-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These values are constant for every level of pte lookup.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-20-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-20-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the check from the top of get_physical_address to
the two callers, where passing mmu_idx makes no sense.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-19-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-19-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Table 9.5 "Effect of MPRV..." specifies that MPV=1 uses VS-level
vsstatus.SUM instead of HS-level sstatus.SUM.
For HLV/HSV instructions, the HS-level register does not apply, but
the VS-level register presumably does, though this is not mentioned
explicitly in the manual. However, it matches the behavior for MPV.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-18-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-18-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Incorporate the virt_enabled and MPV checks into the cpu_mmu_index
function, so we don't have to keep doing it within tlb_fill and
subroutines. This also elides a flush on changes to MPV.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-17-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-17-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current cpu_mmu_index value is really irrelevant to
the HLV/HSV lookup. Provide the correct priv level directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-16-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-16-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move and rename riscv_cpu_two_stage_lookup, to match
the other mmuidx_* functions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-15-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-15-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the priv level encoded into the mmu_idx, rather than
starting from env->priv. We have already checked MPRV+MPP
in riscv_cpu_mmu_index -- no need to repeat that.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-14-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-14-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In get_physical_address, we should use the setting passed
via mmu_idx rather than checking env->mstatus directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-13-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-13-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We will enable more uses of this bit in the future.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-12-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-12-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implement these instructions via helpers, in expectation
of determining the mmu_idx to use at runtime. This allows
the permission check to also be moved out of line, which
allows HLSX to be removed from TB_FLAGS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the new functions to properly check execute permission
for the read rather than read permission.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-10-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-10-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Kernel needs to access user mode memory e.g. during syscalls, the window
is usually opened up for a very limited time through MSTATUS.SUM, the
overhead is too much if tlb_flush() gets called for every SUM change.
This patch creates a separate MMU index for S+SUM, so that it's not
necessary to flush tlb anymore when SUM changes. This is similar to how
ARM handles Privileged Access Never (PAN).
Result of 'pipe 10' from unixbench boosts from 223656 to 1705006. Many
other syscalls benefit a lot from this too.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Message-Id: <20230324054154.414846-3-fei2.wu@intel.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-8-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-8-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently it's assumed the 2 low bits of mmu_idx map to privilege mode,
this assumption won't last as we are about to add more mmu_idx. Here an
individual priv field is added into TB_FLAGS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Message-Id: <20230324054154.414846-2-fei2.wu@intel.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-7-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-7-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Once we mistook the vstart directly from the env->vstart. As env->vstart is not
a constant, we should record it in the tb flags if we want to use
it in translation.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230324143031.1093-5-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-6-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-6-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Merge with mstatus_{fs,vs}. We might perform a redundant
assignment to one or the other field, but it's a trivial
and saves 4 bits from TB_FLAGS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-5-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-5-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reuse the MSTATUS_FS and MSTATUS_VS for the tb flags positions is not a
normal way.
It will make it hard to change the tb flags layout. And even worse, if we
want to keep tb flags for a same extension togather without a hole.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230324143031.1093-4-zhiwei_liu@linux.alibaba.com>
[rth: Adjust trans_rvf.c.inc as well; use the typedef]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-4-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-4-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The pointer masking is the only extension that directly use status.
The vector or float extension uses the status in an indirect way.
Replace the pointer masking extension special status fields with
the general status.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230324143031.1093-3-zhiwei_liu@linux.alibaba.com>
[rth: Add a typedef for the enum]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-3-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Virt enabled state is not a constant, so we should put it into tb flags.
Thus we can use it like a constant condition at translation phase.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230324143031.1093-2-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-2-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- Trap satp/hgatp accesses from HS-mode when MSTATUS.TVM is enabled.
- Trap satp accesses from VS-mode when HSTATUS.VTVM is enabled.
- Raise RISCV_EXCP_ILLEGAL_INST when U-mode executes SFENCE.VMA/SINVAL.VMA.
- Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes
SFENCE.VMA/SINVAL.VMA or VS-mode executes SFENCE.VMA/SINVAL.VMA with
HSTATUS.VTVM enabled.
- Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes
HFENCE.GVMA/HFENCE.VVMA/HINVAL.GVMA/HINVAL.VVMA.
Signed-off-by: Yi Chen <chenyi2000@zju.edu.cn>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406101559.39632-1-chenyi2000@zju.edu.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zdinx/Zhinx{min} require Zfinx. And require relationship is usually done
by check currently.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230408135908.25269-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
mstatus.MPP field is a WARL field since priv version 1.11, so we
remain it unchanged if an invalid value is written into it. And
after this, RVH shouldn't be passed to riscv_cpu_set_mode().
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230407014743.18779-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
PRV_H has no real meaning, but just a reserved privilege mode currently.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230407014743.18779-3-liweiwei@iscas.ac.cn>
[ Changes by AF:
- Convert one missing use of PRV_H
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The MPP will be set to the least-privileged supported mode (U if
U-mode is implemented, else M).
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230407014743.18779-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The function is now a no-op for all cpu_init() callers that are setting
a non-zero misa value in set_misa(), since it's no longer used to sync
cpu->cfg props with env->misa_ext bits. Remove it in those cases.
While we're at it, rename the function to match what it's actually
doing: create user properties to set/remove CPU extensions. Make a note
that it will overwrite env->misa_ext with the defaults set by each user
property.
Update the MISA bits comment in cpu.h as well.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-21-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're still have one RISCVCPUConfig MISA flag, 'ext_g'. We'll remove it
the same way we did with the others: create a "g" RISCVCPUMisaExtConfig
property, remove the old "g" property, remove all instances of 'cfg.ext_g'
and use riscv_has_ext(env, RVG).
The caveat is that we don't have RVG, so add it. RVG will be used right
off the bat in set_misa() of rv64_thead_c906_cpu_init() because the CPU is
enabling G via the now removed 'ext_g' flag.
After this patch, there are no more MISA extensions represented by flags
in RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This CPU is enabling G via cfg.ext_g and, at the same time, setting
IMAFD in set_misa() and cfg.ext_icsr.
riscv_cpu_validate_set_extensions() is already doing that, so there's no
need for cpu_init() setups to worry about setting G and its extensions.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This function was created to move the sync between cpu->cfg.ext_N bit
changes to env->misa_ext* from the validation step to an ealier step,
giving us a guarantee that we could use either cpu->cfg.ext_N or
riscv_has_ext(env,N) in the validation.
We don't have any cpu->cfg.ext_N left that has an existing MISA bit
(cfg.ext_g will be handled shortly). The function is now a no-op, simply
copying the existing values of misa_ext* back to misa_ext*.
Remove it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "v" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVV. Instances of cpu->cfg.ext_v and similar are
replaced with riscv_has_ext(env, RVV).
Remove the old "v" property and 'ext_v' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "j" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVJ. Instances of cpu->cfg.ext_j and similar are
replaced with riscv_has_ext(env, RVJ).
Remove the old "j" property and 'ext_j' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "h" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVH. Instances of cpu->cfg.ext_h and similar are
replaced with riscv_has_ext(env, RVH).
Remove the old "h" property and 'ext_h' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "u" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVU. Instances of cpu->cfg.ext_u and similar are
replaced with riscv_has_ext(env, RVU).
Remove the old "u" property and 'ext_u' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "s" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVS. Instances of cpu->cfg.ext_s and similar are
replaced with riscv_has_ext(env, RVS).
Remove the old "s" property and 'ext_s' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "m" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVM. Instances of cpu->cfg.ext_m and similar are
replaced with riscv_has_ext(env, RVM).
Remove the old "m" property and 'ext_m' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "e" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVE. Instances of cpu->cfg.ext_e and similar are
replaced with riscv_has_ext(env, RVE).
Remove the old "e" property and 'ext_e' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "i" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVI. Instances of cpu->cfg.ext_i and similar are
replaced with riscv_has_ext(env, RVI).
Remove the old "i" property and 'ext_i' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "f" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVF. Instances of cpu->cfg.ext_f and similar are
replaced with riscv_has_ext(env, RVF).
Remove the old "f" property and 'ext_f' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "d" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVD. Instances of cpu->cfg.ext_d and similar are
replaced with riscv_has_ext(env, RVD).
Remove the old "d" property and 'ext_d' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "c" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVC. Instances of cpu->cfg.ext_c and similar are
replaced with riscv_has_ext(env, RVC).
Remove the old "c" property and 'ext_c' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new "a" RISCVCPUMisaExtConfig property that will update
env->misa_ext* with RVA. Instances of cpu->cfg.ext_a and similar are
replaced with riscv_has_ext(env, RVA).
Remove the old "a" property and 'ext_a' from RISCVCPUConfig.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Ever since RISCVCPUConfig got introduced users are able to set CPU extensions
in the command line. User settings are reflected in the cpu->cfg object
for later use. These properties are used in the target/riscv/cpu.c code,
most notably in riscv_cpu_validate_set_extensions(), where most of our
realize time validations are made.
And then there's env->misa_ext, the field where the MISA extensions are
set, that is read everywhere else. We need to keep env->misa_ext updated
with cpu->cfg settings, since our validations rely on it, forcing us to
make register_cpu_props() write cpu->cfg.ext_N flags to cover for named
CPUs that aren't used named properties but also needs to go through the
same validation steps. Failing to so will make those name CPUs fail
validation (see c66ffcd535 for more info). Not only that, but we also
need to sync env->misa_ext with cpu->cfg again during realize() time to
catch any change the user might have done, since the rest of the code
relies on that.
Making cpu->cfg.ext_N and env->misa_ext reflect each other is not
needed. What we want is a way for users to enable/disable MISA extensions,
and there's nothing stopping us from letting the user write env->misa_ext
directly. Here are the artifacts that will enable us to do that:
- RISCVCPUMisaExtConfig will declare each MISA property;
- cpu_set_misa_ext_cfg() is the setter for each property. We'll write
env->misa_ext and env->misa_ext_mask with the appropriate misa_bit;
cutting off cpu->cfg.ext_N from the logic;
- cpu_get_misa_ext_cfg() is a getter that will retrieve the current val
of the property based on env->misa_ext;
- riscv_cpu_add_misa_properties() will be called in register_cpu_props()
to init all MISA properties from the misa_ext_cfgs[] array.
With this infrastructure we'll start to get rid of each cpu->cfg.ext_N
attribute in the next patches.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We don't have MISA extensions in isa_edata_arr[] anymore. Remove the
redundant 'multi_letter' field from isa_ext_data.
Suggested-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The code that disables extensions if there's a priv version mismatch
uses cpu->cfg.ext_N properties to do its job.
We're aiming to not rely on cpu->cfg.ext_N props for MISA bits. Split
the MISA related verifications in a new function, removing it from
isa_edata_arr[].
We're also erroring it out instead of disabling, making the cpu_init()
function responsible for running an adequate priv spec for the MISA
extensions it wants to use.
Note that the RVV verification is being ignored since we're always have
at least PRIV_VERSION_1_10_0.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When riscv_cpu_realize() starts we're guaranteed to have cpu->cfg.ext_N
properties updated. The same can't be said about env->misa_ext*, since
the user might enable/disable MISA extensions in the command line, and
env->misa_ext* won't caught these changes. The current solution is to
sync everything at the end of validate_set_extensions(), checking every
cpu->cfg.ext_N value to do a set_misa() in the end.
The last change we're making in the MISA cfg flags are in the G
extension logic, enabling IMAFG if cpu->cfg_ext.g is enabled. Otherwise
we're not making any changes in MISA bits ever since realize() starts.
There's no reason to postpone misa_ext updates until the end of the
validation. Let's do it earlier, during realize(), in a new helper
called riscv_cpu_sync_misa_cfg(). If cpu->cfg.ext_g is enabled, do it
again by updating env->misa_ext* directly.
This is a pre-requisite to allow riscv_cpu_validate_set_extensions() to
use riscv_has_ext() instead of cpu->cfg.ext_N to validate the MISA
extensions, which is our end goal here.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230406180351.570807-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix lines with over 80 characters for both code and comments.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230405085813.40643-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix formats for multi-lines comments.
Add spaces around single line comments(after "/*" and before "*/").
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230405085813.40643-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix identation problems, and try to use the same indentation strategy
in the same file.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230405085813.40643-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Directly use env->virt_enabled instead.
Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230405085813.40643-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
decode_save_opc() will not work for generate_exception(), since 0 is passed
to riscv_raise_exception() as pc in helper_raise_exception(), and bins will
not be restored in this case.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230330034636.44585-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Function get_physical_address() translates both virtual address and
guest physical address, and the latter is 34-bits for Sv32x4. So we
should use vaddr type for 'addr' parameter.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230329101928.83856-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove redundant parentheses in get_physical_address.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230327080858.39703-8-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently we only use the env->virt to encode the virtual mode enabled
status. Let's make it a bool type.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230325145348.1208-1-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230327080858.39703-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In current implementation, riscv_cpu_set_virt_enabled is only called when
RVH is enabled.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230327080858.39703-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since env->virt.VIRT_ONOFF is initialized as false, and will not be set
to true when RVH is disabled, so we can just return this bit(false) when
RVH is not disabled.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230327080858.39703-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Check on riscv_cpu_virt_enabled contains the check on RVH.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230327080858.39703-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The assignment is done under the condition riscv_cpu_virt_enabled()=true.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230327080858.39703-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When I boot a ubuntu image, QEMU output a "Bad icount read" message and exit.
The reason is that when execute helper_mret or helper_sret, it will
cause a call to icount_get_raw_locked (), which needs set can_do_io flag
on cpustate.
Thus we setting this flag when execute these two instructions.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230324064011.976-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add and expose property for Zce:
* Specifying Zce without F includes Zca, Zcb, Zcmp, Zcmt.
* Specifying Zce with F includes Zca, Zcb, Zcmp, Zcmt and Zcf.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-11-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add encode, trans* functions and helper functions support for Zcmt
instrutions.
Add support for jvt csr.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-8-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add encode, trans* functions for Zcmp instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add encode and trans* functions support for Zcb instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Separate c_fld/c_fsd from fld/fsd to add additional check for
c.fld{sp}/c.fsd{sp} which is useful for zcmp/zcmt to reuse
their encodings.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Separate c_flw/c_fsw from flw/fsw to add check for Zcf extension.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Modify the check for C extension to Zca (C implies Zca).
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20230307081403.61950-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add properties for Zca,Zcb,Zcf,Zcd,Zcmp,Zcmt extension.
Add check for these properties.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
dt-validate complains:
> soc: pmu: {'riscv,event-to-mhpmcounters':
> [[1, 1, 524281], [2, 2, 524284], [65561, 65561, 524280],
> [65563, 65563, 524280], [65569, 65569, 524280], [0, 0, 0], [0, 0]],
> pmu: riscv,event-to-mhpmcounters:6: [0, 0] is too short
There are bogus 0 entries added at the end, of which one is of
insufficient length. This happens because only 15 of
fdt_event_ctr_map[]'s 20 elements are populated & qemu_fdt_setprop() is
called using the size of the array.
Reduce the array to 15 elements to make the error go away.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230404173333.35179-1-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zicond standard extension implements the same instruction
semantics as XVentanaCondOps, although using different mnemonics and
opcodes.
Point XVentanaCondOps to the (newly implemented) Zicond implementation
to reduce the future maintenance burden.
Also updating MAINTAINERS as trans_xventanacondops.c.inc.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307180708.302867-3-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After the original Zicond support was stuck/fell through the cracks on
the mailing list at v3 (and a different implementation was merged in
the meanwhile), we need to refactor Zicond to prepare it to be reused
by XVentanaCondOps.
This commit lifts the common logic out into gen_czero and uses this
via gen_logic and 2 helper functions (effectively partial closures).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307180708.302867-2-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove RISCVCPU argument, and get cfg infomation from CPURISCVState
directly.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230309071329.45932-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use CPURISCVState as argument directly in riscv_cpu_update_mip and
riscv_timer_write_timecmp, since type converts from CPURISCVState to
RISCVCPU in many caller of them and then back to CPURISCVState in them.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230309071329.45932-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use env_archcpu() to get RISCVCPU pointer from env directly.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230309071329.45932-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector implicitly enables zve64d, zve64f, zve32f sub extensions. As vector
only requires PRIV_1_10_0, these sub extensions should not require priv version
higher than that.
The same for Zfh.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230321043415.754-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
