nano/po/zh_CN.po

# Simplified Chinese Messages for the nano editor
# Copyright (C) 2004, 2005, 2009, 2010, 2011 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
#
# LI Daobing <lidaobing@gmail.com>, 2007, 2008, 2009.
# Aron Xu <happyaron.xu@gmail.com>, 2009, 2010, 2011, 2015.
# Boyuan Yang <073plan@gmail.com>, 2018, 2019, 2020, 2021.
msgid ""
msgstr ""
"Project-Id-Version: nano 5.5-pre1\n"
"Report-Msgid-Bugs-To: nano-devel@gnu.org\n"
"POT-Creation-Date: 2021-03-03 10:07+0100\n"
"PO-Revision-Date: 2021-01-07 10:51-0500\n"
"Last-Translator: Boyuan Yang <073plan@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Poedit 2.4.2\n"

#. TRANSLATORS: Try to keep this at most 7 characters.
#: src/browser.c:190 src/browser.c:197
msgid "(dir)"
msgstr "（目录）"

#. TRANSLATORS: Try to keep this at most 12 characters.
#: src/browser.c:194
msgid "(parent dir)"
msgstr "（父目录）"

#. TRANSLATORS: Try to keep this at most 7 characters.
#. * If necessary, you can leave out the parentheses.
#: src/browser.c:224
msgid "(huge)"
msgstr "（巨大）"

#: src/browser.c:287 src/browser.c:292 src/search.c:254
msgid "Search Wrapped"
msgstr "已从头搜索"

#: src/browser.c:303 src/search.c:435
msgid "This is the only occurrence"
msgstr "这是唯一出现之处"

#. TRANSLATORS: This is the main search prompt.
#: src/browser.c:342 src/search.c:97
msgid "Search"
msgstr "搜索"

#. TRANSLATORS: A modifier of the Search prompt.
#: src/browser.c:344 src/search.c:101
msgid " [Backwards]"
msgstr " [向后搜索]"

#: src/browser.c:350 src/browser.c:590 src/files.c:1172 src/files.c:2135
#: src/nano.c:308 src/search.c:111 src/search.c:289 src/search.c:724
#: src/search.c:770 src/text.c:2590 src/text.c:2784
msgid "Cancelled"
msgstr "已取消"

#: src/browser.c:376 src/search.c:370
msgid "No current search pattern"
msgstr "没有当前搜索模式"

#: src/browser.c:419
#, c-format
msgid "Cannot open directory: %s"
msgstr "无法打开目录：%s"

#. TRANSLATORS: This is a prompt.
#: src/browser.c:589
msgid "Go To Directory"
msgstr "跳至目录"

#. TRANSLATORS: This refers to the confining effect of the
#. * option --operatingdir, not of --restricted.
#: src/browser.c:607 src/browser.c:638
#, c-format
msgid "Can't go outside of %s"
msgstr "无法访问 %s 外部"

#: src/browser.c:629
msgid "Can't move up a directory"
msgstr "无法上移一个目录"

#: src/browser.c:644 src/files.c:883 src/files.c:889 src/files.c:1798
#: src/files.c:1813 src/history.c:292 src/history.c:320 src/history.c:389
#: src/history.c:447 src/rcfile.c:923 src/rcfile.c:1667
#, c-format
msgid "Error reading %s: %s"
msgstr "读取 %s 出错：%s"

#: src/browser.c:717
msgid "The working directory has disappeared"
msgstr "工作目录已消失"

#: src/color.c:160
#, c-format
msgid "Unknown syntax name: %s"
msgstr "未知语法名称：%s"

#: src/color.c:200
#, c-format
msgid "magic_load() failed: %s"
msgstr "magic_load() 失败：%s"

#: src/color.c:204
#, c-format
msgid "magic_file(%s) failed: %s"
msgstr "magic_file(%s) 失败：%s"

#: src/cut.c:170 src/cut.c:235 src/cut.c:560
msgid "Nothing was cut"
msgstr "无剪切部分"

#: src/cut.c:610 src/cut.c:656
msgid "Copied nothing"
msgstr "未复制任何内容"

#: src/cut.c:715
msgid "Cutbuffer is empty"
msgstr "剪贴缓冲区为空"

#: src/files.c:126
#, c-format
msgid "Error deleting lock file %s: %s"
msgstr "删除锁文件 %s 出错：%s"

#. TRANSLATORS: Keep the next seven messages at most 76 characters.
#: src/files.c:155
msgid "Couldn't determine my identity for lock file"
msgstr "无法为锁文件确定我的身份"

#: src/files.c:160
#, c-format
msgid "Couldn't determine hostname: %s"
msgstr "无法确定主机名称：%s"

#: src/files.c:176 src/files.c:218
#, c-format
msgid "Error writing lock file %s: %s"
msgstr "写入锁文件 %s 出错：%s"

#: src/files.c:245
msgid "Someone else is also editing this file"
msgstr "有其他用户也在编辑这个文件"

#: src/files.c:253
#, c-format
msgid "Error opening lock file %s: %s"
msgstr "打开锁文件 %s 出错：%s"

#: src/files.c:268
#, c-format
msgid "Bad lock file is ignored: %s"
msgstr "已忽略损坏的锁文件：%s"

#. TRANSLATORS: The second %s is the name of the user, the third that of the editor.
#: src/files.c:289
#, c-format
msgid "File %s is being edited by %s (with %s, PID %s); open anyway?"
msgstr "文件 %s 正被 %s 编辑（编辑工具 %s，PID %s）；仍然打开文件吗？"

#. TRANSLATORS: Keep the next ten messages at most 76 characters.
#: src/files.c:347
#, c-format
msgid "Directory '%s' does not exist"
msgstr "目录“%s”不存在"

#: src/files.c:349
#, c-format
msgid "Path '%s': %s"
msgstr "路径“%s”：%s"

#: src/files.c:351
#, c-format
msgid "Path '%s' is not a directory"
msgstr "路径“%s”不是目录"

#: src/files.c:353
#, c-format
msgid "Path '%s' is not accessible"
msgstr "路径“%s”不可访问"

#: src/files.c:356
#, c-format
msgid "Directory '%s' is not writable"
msgstr "目录“%s”不可写入"

#: src/files.c:386
#, c-format
msgid "Can't read file from outside of %s"
msgstr "无法读取 %s 外部的文件"

#: src/files.c:396 src/rcfile.c:899
#, c-format
msgid "\"%s\" is a directory"
msgstr "“%s”是一个目录"

#: src/files.c:401 src/rcfile.c:900
#, c-format
msgid "\"%s\" is a device file"
msgstr "\"%s\" 是一个设备文件"

#: src/files.c:407
#, c-format
msgid "\"%s\" is a FIFO"
msgstr "“%s”是一个命名管道（FIFO）"

#: src/files.c:414
#, c-format
msgid "%s is meant to be read-only"
msgstr "%s 应当为只读"

#. TRANSLATORS: First %s is file name, second %s is file format.
#: src/files.c:523
#, c-format
msgid "%s -- %zu line (%s)"
msgid_plural "%s -- %zu lines (%s)"
msgstr[0] "%s -- %zu 行（%s）"

#: src/files.c:525 src/files.c:531 src/global.c:1091 src/winio.c:1972
msgid "New Buffer"
msgstr "新缓冲区"

#: src/files.c:526
msgid "DOS"
msgstr "DOS"

#: src/files.c:526
msgid "Mac"
msgstr "Mac"

#: src/files.c:529
#, c-format
msgid "%s -- %zu line"
msgid_plural "%s -- %zu lines"
msgstr[0] "%s -- %zu 行"

#: src/files.c:539
msgid "No more open file buffers"
msgstr "无多余文件缓冲区可启用"

#: src/files.c:754 src/files.c:881 src/files.c:1850
msgid "Interrupted"
msgstr "被中断"

#: src/files.c:800
#, c-format
msgid "File '%s' is unwritable"
msgstr "文件“%s”不可写入"

#: src/files.c:805
#, c-format
msgid "Read %zu line (Converted from Mac format)"
msgid_plural "Read %zu lines (Converted from Mac format)"
msgstr[0] "已读取 %zu 行（转换自 Mac 格式）"

#: src/files.c:810
#, c-format
msgid "Read %zu line (Converted from DOS format)"
msgid_plural "Read %zu lines (Converted from DOS format)"
msgstr[0] "已读取 %zu 行（转换自 DOS 格式）"

#: src/files.c:816
#, c-format
msgid "Read %zu line"
msgid_plural "Read %zu lines"
msgstr[0] "已读取 %zu 行"

#: src/files.c:855
msgid "New File"
msgstr "新文件"

#: src/files.c:858
#, c-format
msgid "File \"%s\" not found"
msgstr "文件“%s”未找到"

#: src/files.c:865
msgid "Reading from FIFO..."
msgstr "正在从命名管道（FIFO）录制..."

#: src/files.c:893
msgid "Reading..."
msgstr "正在读取..."

#: src/files.c:975 src/text.c:2332 src/text.c:2598
#, c-format
msgid "Could not create pipe: %s"
msgstr "无法创建管道：%s"

#: src/files.c:1014 src/text.c:2144 src/text.c:2412 src/text.c:2633
#, c-format
msgid "Could not fork: %s"
msgstr "无法 fork：%s"

#: src/files.c:1019
msgid "Executing..."
msgstr "正在执行..."

#. TRANSLATORS: This one goes with Undid/Redid messages.
#: src/files.c:1039 src/files.c:1083
msgid "filtering"
msgstr "过滤"

#: src/files.c:1078
#, c-format
msgid "Failed to open pipe: %s"
msgstr "打开管道失败：%s"

#. TRANSLATORS: The next six messages are prompts.
#: src/files.c:1128
msgid "Command to execute in new buffer"
msgstr "在新缓冲区中要执行的命令"

#: src/files.c:1131
msgid "Command to execute"
msgstr "要执行的命令"

#: src/files.c:1139
#, c-format
msgid "File to read unconverted into new buffer [from %s]"
msgstr "要不经转换读入新缓冲区的文件 [来自 %s]"

#: src/files.c:1142
#, c-format
msgid "File to read into new buffer [from %s]"
msgstr "要读入新缓冲区的文件 [来自 %s]"

#: src/files.c:1147
#, c-format
msgid "File to insert unconverted [from %s]"
msgstr "要不经转换插入的文件 [来自 %s]"

#: src/files.c:1150
#, c-format
msgid "File to insert [from %s]"
msgstr "要插入的文件 [来自 %s]"

#: src/files.c:1489
#, c-format
msgid "Invalid operating directory: %s\n"
msgstr "无效的操作目录：%s\n"

#: src/files.c:1538
#, c-format
msgid "Invalid backup directory: %s\n"
msgstr "无效的备份目录：%s\n"

#: src/files.c:1593
msgid "Making backup..."
msgstr "正在创建备份…"

#: src/files.c:1625
msgid "Too many existing backup files"
msgstr "已有备份文件过多"

#: src/files.c:1670
msgid "Cannot read original file"
msgstr "无法读取原始文件"

#: src/files.c:1702
msgid "Cannot make regular backup"
msgstr "无法创建正常备份"

#: src/files.c:1703
msgid "Trying again in your home directory"
msgstr "正重新尝试在您的家目录下存放备份"

#: src/files.c:1715
msgid "Cannot make backup"
msgstr "无法创建备份"

#. TRANSLATORS: Try to keep this message at most 76 characters.
#: src/files.c:1726
msgid "Cannot make backup; continue and save actual file? "
msgstr "无法创建备份；要继续并保存实际文件吗？"

#. TRANSLATORS: The %s is the reason of failure.
#: src/files.c:1731
#, c-format
msgid "Cannot make backup: %s"
msgstr "无法创建备份：%s"

#: src/files.c:1767
#, c-format
msgid "Can't write outside of %s"
msgstr "无法写入%s 外部"

#: src/files.c:1805 src/files.c:1817 src/text.c:2515 src/text.c:2533
#: src/text.c:2932
#, c-format
msgid "Error writing temp file: %s"
msgstr "写入临时文件%s 出错"

#: src/files.c:1824
msgid "Writing to FIFO..."
msgstr "正在写入命名管道（FIFO）..."

#: src/files.c:1852 src/files.c:1863 src/files.c:1885 src/files.c:1902
#: src/files.c:1911 src/files.c:1939 src/files.c:1950 src/files.c:1956
#: src/history.c:364 src/history.c:374 src/history.c:377 src/history.c:463
#: src/history.c:487 src/history.c:493
#, c-format
msgid "Error writing %s: %s"
msgstr "写入%s 出错：%s"

#: src/files.c:1870
msgid "Writing..."
msgstr "正在写入..."

#: src/files.c:1927 src/files.c:1935
#, c-format
msgid "Error reading temp file: %s"
msgstr "读取临时文件出错：%s"

#: src/files.c:2011
#, c-format
msgid "Wrote %zu line"
msgid_plural "Wrote %zu lines"
msgstr[0] "已写入 %zu 行"

#: src/files.c:2098
msgid " [DOS Format]"
msgstr " [DOS 格式]"

#: src/files.c:2099
msgid " [Mac Format]"
msgstr " [Mac 格式]"

#: src/files.c:2100
msgid " [Backup]"
msgstr " [备份]"

#. TRANSLATORS: The next six strings are prompts.
#: src/files.c:2107
msgid "Prepend Selection to File"
msgstr "前引选择部份于文件"

#: src/files.c:2108
msgid "Append Selection to File"
msgstr "附加选择部份至文件"

#: src/files.c:2109
msgid "Write Selection to File"
msgstr "写入选择部份至文件"

#: src/files.c:2111
msgid "File Name to Prepend to"
msgstr "要前引于的文件名"

#: src/files.c:2112
msgid "File Name to Append to"
msgstr "要附加至的文件名"

#: src/files.c:2115
msgid "File Name to Write"
msgstr "要写入的文件名"

#. TRANSLATORS: Concisely say the screen is too small.
#: src/files.c:2193
msgid "Too tiny"
msgstr "屏幕过小"

#. TRANSLATORS: Restricted mode forbids overwriting.
#: src/files.c:2226
msgid "File exists -- cannot overwrite"
msgstr "文件已存在——无法覆写"

#: src/files.c:2236
msgid "Save file under DIFFERENT NAME? "
msgstr "以不同的名称保存文件？ "

#: src/files.c:2244
#, c-format
msgid "File \"%s\" exists; OVERWRITE? "
msgstr "文件“%s”已存在；要覆盖吗？ "

#: src/files.c:2268
msgid "File on disk has changed"
msgstr "磁盘上的文件已改变"

#. TRANSLATORS: Try to keep this at most 76 characters.
#: src/files.c:2271
msgid "File was modified since you opened it; continue saving? "
msgstr "在您打开文件后文件已被改变；是否继续保存？"

#: src/files.c:2647
msgid "(more)"
msgstr "(更多)"

#. TRANSLATORS: Try to keep the next two strings at most 10 characters.
#: src/global.c:565
msgid "Exit"
msgstr "离开"

#: src/global.c:566
msgid "Close"
msgstr "关闭"

#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:574
msgid "Cancel the current function"
msgstr "取消当前功能"

#: src/global.c:575
msgid "Display this help text"
msgstr "显示帮助"

#: src/global.c:576
msgid "Close the current buffer / Exit from nano"
msgstr "关闭当前缓冲区 / 离开 nano"

#: src/global.c:578
msgid "Write the current buffer (or the marked region) to disk"
msgstr "将当前缓冲区（或标记的区域）写入磁盘"

#: src/global.c:580
msgid "Insert another file into current buffer (or into new buffer)"
msgstr "将另一个文件插入当前缓冲区（或者插入新缓冲区）"

#: src/global.c:582
msgid "Search forward for a string or a regular expression"
msgstr "正向查找字符串或正则表达式"

#: src/global.c:584
msgid "Search backward for a string or a regular expression"
msgstr "反向查找字符串或正则表达式"

#: src/global.c:586
msgid "Cut current line (or marked region) and store it in cutbuffer"
msgstr "剪切当前行（或者标记的区域）并存至剪贴缓冲区"

#: src/global.c:588
msgid "Paste the contents of cutbuffer at current cursor position"
msgstr "在当前游标位置粘贴剪贴缓冲区内容"

#: src/global.c:589
msgid "Display the position of the cursor"
msgstr "显示光标位置"

#: src/global.c:591
msgid "Invoke the spell checker, if available"
msgstr "尝试运行拼写检查"

#: src/global.c:593
msgid "Replace a string or a regular expression"
msgstr "替换字符串或正则表达式"

#: src/global.c:594
msgid "Go to line and column number"
msgstr "跳至指定行与列位置"

#: src/global.c:596
msgid "Mark text starting from the cursor position"
msgstr "标记游标所在位置开始的文本"

#: src/global.c:598
msgid "Copy current line (or marked region) and store it in cutbuffer"
msgstr "复制当前行（或者标记的区域）并存至剪贴缓冲区"

#: src/global.c:599
msgid "Throw away the current line (or marked region)"
msgstr "去除当前行（或者标记的行）"

#: src/global.c:600
msgid "Indent the current line (or marked lines)"
msgstr "缩进当前行（或者标记的行）"

#: src/global.c:601
msgid "Unindent the current line (or marked lines)"
msgstr "取消缩进当前行（或者标记的行）"

#: src/global.c:602
msgid "Undo the last operation"
msgstr "撤销上次操作"

#: src/global.c:603
msgid "Redo the last undone operation"
msgstr "重做撤销的操作"

#: src/global.c:605
msgid "Go back one character"
msgstr "向后跳一字符"

#: src/global.c:606
msgid "Go forward one character"
msgstr "向前跳一字符"

#: src/global.c:607
msgid "Go back one word"
msgstr "向后跳一个词"

#: src/global.c:608
msgid "Go forward one word"
msgstr "向前跳一个词"

#: src/global.c:609
msgid "Go to previous line"
msgstr "跳至前一行"

#: src/global.c:610
msgid "Go to next line"
msgstr "跳至后一行"

#: src/global.c:611
msgid "Go to beginning of current line"
msgstr "跳至当前行首"

#: src/global.c:612
msgid "Go to end of current line"
msgstr "跳至当前行尾"

#: src/global.c:613
msgid "Go to previous block of text"
msgstr "跳至前一段文本"

#: src/global.c:614
msgid "Go to next block of text"
msgstr "跳至后一段文本"

#: src/global.c:617
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "跳至当前段落开头，如已在段落开头，则调至上一段落起始处"

#: src/global.c:619
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "跳至当前段落结尾，如已在段落结尾，则调至下一段落结尾"

#: src/global.c:621
msgid "Go one screenful up"
msgstr "向上跳转一屏"

#: src/global.c:622
msgid "Go one screenful down"
msgstr "向下跳转一屏"

#: src/global.c:623
msgid "Go to the first line of the file"
msgstr "跳至文件第一行"

#: src/global.c:624
msgid "Go to the last line of the file"
msgstr "跳至文件最后一行"

#: src/global.c:626
msgid "Go to the matching bracket"
msgstr "移动至对应括号"

#: src/global.c:630
msgid "Scroll up one line without moving the cursor textually"
msgstr "向上滚动一行但不移动文本中的游标"

#: src/global.c:632
msgid "Scroll down one line without moving the cursor textually"
msgstr "向下滚动一行但不移动文本中的游标"

#: src/global.c:633
msgid "Center the line where the cursor is"
msgstr "将游标所在的行居中"

#: src/global.c:636
msgid "Switch to the previous file buffer"
msgstr "切换至上个文件缓冲区"

#: src/global.c:637
msgid "Switch to the next file buffer"
msgstr "切换至下个文件缓冲区"

#: src/global.c:639
msgid "Insert the next keystroke verbatim"
msgstr "插入下一按键原型"

#: src/global.c:640
msgid "Insert a tab at the cursor position"
msgstr "插入制表符于游标位置"

#: src/global.c:641
msgid "Insert a newline at the cursor position"
msgstr "插入新行于游标位置"

#: src/global.c:642
msgid "Delete the character under the cursor"
msgstr "删除游标之下的字符"

#: src/global.c:644
msgid "Delete the character to the left of the cursor"
msgstr "删除游标左侧的字符"

#: src/global.c:647
msgid "Delete backward from cursor to word start"
msgstr "从游标向单词起始位置向后删除"

#: src/global.c:649
msgid "Delete forward from cursor to next word start"
msgstr "从游标向下一个单词起始位置向前删除"

#: src/global.c:651
msgid "Cut from the cursor position to the end of the file"
msgstr "从游标位置剪切至文件结尾"

#: src/global.c:654
msgid "Justify the current paragraph"
msgstr "对齐当前段落"

#: src/global.c:655
msgid "Justify the entire file"
msgstr "对齐整个文件"

#: src/global.c:659
msgid "Count the number of words, lines, and characters"
msgstr "计算字数、行数与字符数"

#: src/global.c:661
msgid "Refresh (redraw) the current screen"
msgstr "重新显示当前画面"

#: src/global.c:662
msgid "Suspend the editor (if suspension is enabled)"
msgstr "挂起编辑器（如果启用了挂起功能）"

#: src/global.c:664
msgid "Try and complete the current word"
msgstr "尝试补全当前单词"

#: src/global.c:668
msgid "Comment/uncomment the current line (or marked lines)"
msgstr "注释/反注释当前行（或者标记的行）"

#: src/global.c:670
msgid "Save file without prompting"
msgstr "不提示而保存文件"

#: src/global.c:671
msgid "Search next occurrence backward"
msgstr "向后搜索下一个出现位置"

#: src/global.c:672
msgid "Search next occurrence forward"
msgstr "向前搜索下一个出现位置"

#: src/global.c:674
msgid "Start/stop recording a macro"
msgstr "开始/停止录制宏"

#: src/global.c:675
msgid "Run the last recorded macro"
msgstr "运行最近录制的宏"

#: src/global.c:676
msgid "Place or remove an anchor at the current line"
msgstr "在当前行放置或移除锚点"

#: src/global.c:677
msgid "Jump backward to the nearest anchor"
msgstr "向上跳转至最近的锚点"

#: src/global.c:678
msgid "Jump forward to the nearest anchor"
msgstr "向下跳转至最近的锚点"

#: src/global.c:680
msgid "Toggle the case sensitivity of the search"
msgstr "切换查找的区分大小写选项"

#: src/global.c:681
msgid "Reverse the direction of the search"
msgstr "反转搜索方向"

#: src/global.c:682
msgid "Toggle the use of regular expressions"
msgstr "切换使用正则表达式"

#: src/global.c:684
msgid "Recall the previous search/replace string"
msgstr "编辑前次搜索/替换字符串"

#: src/global.c:685
msgid "Recall the next search/replace string"
msgstr "编辑下次搜索/替换字符串"

#: src/global.c:688
msgid "Toggle the use of DOS format"
msgstr "切换使用 DOS 格式"

#: src/global.c:689
msgid "Toggle the use of Mac format"
msgstr "切换使用 Mac 格式"

#: src/global.c:690
msgid "Toggle appending"
msgstr "切换追加"

#: src/global.c:691
msgid "Toggle prepending"
msgstr "切换前置插入"

#: src/global.c:692
msgid "Toggle backing up of the original file"
msgstr "切换储存既有文件的备份"

#: src/global.c:693
msgid "Execute a function or an external command"
msgstr "执行函数或外部命令"

#: src/global.c:695
msgid "Pipe the current buffer (or marked region) to the command"
msgstr "将当前缓冲区（或标记的区域）通过管道送给外部命令"

#: src/global.c:696
msgid "Do not convert from DOS/Mac format"
msgstr "不要从 DOS/Mac 格式转换"

#: src/global.c:699
msgid "Toggle the use of a new buffer"
msgstr "切换使用新缓冲区"

#: src/global.c:701
msgid "Close buffer without saving it"
msgstr "不保存而关闭缓冲区"

#: src/global.c:703
msgid "Go to file browser"
msgstr "打开文件选单"

#: src/global.c:704
msgid "Exit from the file browser"
msgstr "从文件选单离开"

#: src/global.c:705
msgid "Go to the first file in the list"
msgstr "跳至文件第一列"

#: src/global.c:706
msgid "Go to the last file in the list"
msgstr "跳至文件最后一列"

#: src/global.c:707
msgid "Go to the previous file in the list"
msgstr "跳至列表中的前一个文件"

#: src/global.c:708
msgid "Go to the next file in the list"
msgstr "跳至列表中的下一个文件"

#: src/global.c:710
msgid "Go to lefthand column"
msgstr "跳至左栏"

#: src/global.c:711
msgid "Go to righthand column"
msgstr "跳至右栏"

#: src/global.c:712
msgid "Go to first row in this column"
msgstr "跳至本栏第一列"

#: src/global.c:713
msgid "Go to last row in this column"
msgstr "跳至本栏最后一列"

#: src/global.c:715
msgid "Search forward for a string"
msgstr "向前查找字符串"

#: src/global.c:716
msgid "Search backward for a string"
msgstr "向后查找字符串"

#: src/global.c:717
msgid "Refresh the file list"
msgstr "刷新文件列表"

#: src/global.c:718
msgid "Go to directory"
msgstr "跳至目录"

#: src/global.c:721
msgid "Invoke the linter, if available"
msgstr "尝试运行代码语法检查"

#: src/global.c:722
msgid "Go to previous linter msg"
msgstr "跳至上一个 linter 信息"

#: src/global.c:723
msgid "Go to next linter msg"
msgstr "跳至下一个 linter 信息"

#: src/global.c:725
msgid "Invoke a program to format/arrange/manipulate the buffer"
msgstr "调用其它程序来格式化/修改/操作缓冲区"

#. TRANSLATORS: Try to keep the next thirteen strings at most 10 characters.
#: src/global.c:739
msgid "Help"
msgstr "帮助"

#: src/global.c:743 src/prompt.c:691
msgid "Cancel"
msgstr "取消"

#: src/global.c:765
msgid "Write Out"
msgstr "写入"

#: src/global.c:773
msgid "Read File"
msgstr "读档"

#: src/global.c:780 src/global.c:819
msgid "Justify"
msgstr "对齐"

#: src/global.c:786 src/global.c:877 src/global.c:1023
msgid "Refresh"
msgstr "刷新"

#: src/global.c:791 src/global.c:880
msgid "Where Is"
msgstr "搜索"

#: src/global.c:794 src/global.c:855
msgid "Replace"
msgstr "替换"

#. TRANSLATORS: This starts a backward search.
#: src/global.c:798 src/global.c:882 src/global.c:901 src/global.c:1077
msgid "Where Was"
msgstr "向前搜索"

#. TRANSLATORS: This refers to searching the preceding occurrence.
#: src/global.c:801 src/global.c:885 src/global.c:905
msgid "Previous"
msgstr "上一个"

#: src/global.c:803 src/global.c:887 src/global.c:907
msgid "Next"
msgstr "下一个"

#: src/global.c:807
msgid "Cut"
msgstr "剪切"

#: src/global.c:810
msgid "Paste"
msgstr "粘贴"

#: src/global.c:815
msgid "Execute"
msgstr "执行命令"

#. TRANSLATORS: This refers to the position of the cursor.
#: src/global.c:825
msgid "Location"
msgstr "位置"

#: src/global.c:831 src/global.c:868 src/global.c:978
msgid "Go To Line"
msgstr "跳行"

#. TRANSLATORS: Try to keep the next ten strings at most 12 characters.
#: src/global.c:837
msgid "Undo"
msgstr "撤销"

#: src/global.c:839
msgid "Redo"
msgstr "重做"

#: src/global.c:842
msgid "Set Mark"
msgstr "设置标记"

#: src/global.c:844
msgid "Copy"
msgstr "复制"

#: src/global.c:848
msgid "Case Sens"
msgstr "区分大小写"

#: src/global.c:850
msgid "Reg.exp."
msgstr "正则表达式"

#: src/global.c:852
msgid "Backwards"
msgstr "向后搜索"

#: src/global.c:857
msgid "No Replace"
msgstr "不替换"

#: src/global.c:861
msgid "Older"
msgstr "更旧"

#: src/global.c:863
msgid "Newer"
msgstr "更新"

#. TRANSLATORS: Try to keep the next seven strings at most 10 characters.
#: src/global.c:874
msgid "Go To Dir"
msgstr "跳至目录"

#: src/global.c:897
msgid "To Bracket"
msgstr "至括号"

#. TRANSLATORS: This means move the cursor one character back.
#: src/global.c:912 src/global.c:917
msgid "Back"
msgstr "向后"

#: src/global.c:914 src/global.c:919
msgid "Forward"
msgstr "向前"

#. TRANSLATORS: Try to keep the next ten strings at most 12 characters.
#: src/global.c:925
msgid "Prev Word"
msgstr "前一个字"

#: src/global.c:927
msgid "Next Word"
msgstr "后一个字"

#: src/global.c:931
msgid "Home"
msgstr "顶端"

#: src/global.c:933
msgid "End"
msgstr "尾端"

#: src/global.c:936
msgid "Prev Line"
msgstr "上行"

#: src/global.c:938
msgid "Next Line"
msgstr "下行"

#: src/global.c:941
msgid "Scroll Up"
msgstr "向上卷动"

#: src/global.c:943
msgid "Scroll Down"
msgstr "向下卷动"

#: src/global.c:947
msgid "Prev Block"
msgstr "上一段"

#: src/global.c:949
msgid "Next Block"
msgstr "下一段"

#. TRANSLATORS: Try to keep these two strings at most 16 characters.
#: src/global.c:953
msgid "Begin of Paragr."
msgstr "段落开头"

#: src/global.c:955
msgid "End of Paragraph"
msgstr "段落结尾"

#. TRANSLATORS: Try to keep the next six strings at most 12 characters.
#: src/global.c:960 src/global.c:1163
msgid "Prev Page"
msgstr "上页"

#: src/global.c:962 src/global.c:1165
msgid "Next Page"
msgstr "下页"

#: src/global.c:965
msgid "First Line"
msgstr "首行"

#: src/global.c:967
msgid "Last Line"
msgstr "尾行"

#: src/global.c:971
msgid "Prev File"
msgstr "上个文件"

#: src/global.c:973
msgid "Next File"
msgstr "下个文件"

#. TRANSLATORS: The next four strings are names of keyboard keys.
#: src/global.c:983
msgid "Tab"
msgstr "制表符"

#: src/global.c:985
msgid "Enter"
msgstr "回车"

#: src/global.c:988
msgid "Backspace"
msgstr "退格"

#: src/global.c:990
msgid "Delete"
msgstr "删除"

#. TRANSLATORS: The next two strings refer to deleting words.
#: src/global.c:1001
msgid "Chop Left"
msgstr "向左切除"

#: src/global.c:1003
msgid "Chop Right"
msgstr "向右切除"

#: src/global.c:1005 src/global.c:1148
msgid "Cut Till End"
msgstr "剪切至文末"

#: src/global.c:1010 src/global.c:1107
msgid "Full Justify"
msgstr "全部对齐"

#: src/global.c:1015
msgid "Word Count"
msgstr "字数统计"

#: src/global.c:1019
msgid "Verbatim"
msgstr "原本形式"

#: src/global.c:1027 src/global.c:1151
msgid "Suspend"
msgstr "挂起"

#: src/global.c:1031
msgid "Indent"
msgstr "缩进"

#: src/global.c:1033
msgid "Unindent"
msgstr "取消缩进"

#: src/global.c:1037
msgid "Comment Lines"
msgstr "注释行"

#: src/global.c:1041
msgid "Complete"
msgstr "补全"

#: src/global.c:1046
msgid "Record"
msgstr "录制"

#: src/global.c:1048
msgid "Run Macro"
msgstr "运行宏"

#: src/global.c:1051
msgid "Anchor"
msgstr "锚点"

#: src/global.c:1053
msgid "Up to anchor"
msgstr "上移至锚点"

#: src/global.c:1055
msgid "Down to anchor"
msgstr "下移至锚点"

#. TRANSLATORS: This *deletes* a line or marked region.
#: src/global.c:1059
msgid "Zap"
msgstr "清除"

#: src/global.c:1064 src/global.c:1099
msgid "Spell Check"
msgstr "拼写检查"

#: src/global.c:1068 src/global.c:1103
msgid "Linter"
msgstr "代码语法检查器"

#: src/global.c:1070 src/global.c:1111
msgid "Formatter"
msgstr "格式化工具"

#: src/global.c:1082
msgid "Center"
msgstr "居中"

#: src/global.c:1085
msgid "Save"
msgstr "保存"

#: src/global.c:1095
msgid "Pipe Text"
msgstr "管道传递文字"

#: src/global.c:1116
msgid "Go To Text"
msgstr "跳至文字"

#: src/global.c:1121
msgid "DOS Format"
msgstr "DOS 格式"

#: src/global.c:1123
msgid "Mac Format"
msgstr "Mac 格式"

#: src/global.c:1131
msgid "Append"
msgstr "附加"

#: src/global.c:1133
msgid "Prepend"
msgstr "前引"

#: src/global.c:1136
msgid "Backup File"
msgstr "备份文件"

#: src/global.c:1140
msgid "No Conversion"
msgstr "不转换"

#: src/global.c:1145
msgid "Execute Command"
msgstr "执行命令"

#. TRANSLATORS: This invokes the file browser.
#: src/global.c:1160
msgid "Browse"
msgstr "浏览"

#: src/global.c:1168
msgid "First File"
msgstr "首文件"

#: src/global.c:1170
msgid "Last File"
msgstr "末文件"

#: src/global.c:1174
msgid "Left Column"
msgstr "左栏"

#: src/global.c:1176
msgid "Right Column"
msgstr "右栏"

#: src/global.c:1178
msgid "Top Row"
msgstr "顶行"

#: src/global.c:1180
msgid "Bottom Row"
msgstr "底行"

#: src/global.c:1185
msgid "Discard buffer"
msgstr "禁用缓冲区"

#. TRANSLATORS: The next two strings may be up to 37 characters each.
#: src/global.c:1190
msgid "Previous Linter message"
msgstr "上一条 Linter 信息"

#: src/global.c:1192
msgid "Next Linter message"
msgstr "下一条 Linter 信息"

#. TRANSLATORS: The next thirteen strings are toggle descriptions;
#. * they are best kept shorter than 40 characters, but may be longer.
#: src/global.c:1540
msgid "Help mode"
msgstr "辅助模式"

#: src/global.c:1542
msgid "Constant cursor position display"
msgstr "持续显示游标位置"

#: src/global.c:1544
msgid "Soft wrapping of overlong lines"
msgstr "为过长行进行软折行"

#: src/global.c:1546
msgid "Whitespace display"
msgstr "显示空格"

#: src/global.c:1548
msgid "Color syntax highlighting"
msgstr "语法色彩高亮"

#: src/global.c:1550
msgid "Smart home key"
msgstr "智能HOME键"

#: src/global.c:1552
msgid "Auto indent"
msgstr "自动缩进"

#: src/global.c:1554
msgid "Cut to end"
msgstr "剪切至行尾"

#: src/global.c:1556
msgid "Hard wrapping of overlong lines"
msgstr "为过长行强制换行"

#: src/global.c:1558
msgid "Conversion of typed tabs to spaces"
msgstr "已输入制表符至空白的转换"

#: src/global.c:1560
msgid "Mouse support"
msgstr "鼠标支持"

#: src/global.c:1562
msgid "Suspension"
msgstr "挂起"

#: src/global.c:1564
msgid "Line numbering"
msgstr "行编号"

#: src/help.c:54
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter.  If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt.  Hitting Enter without entering any text will perform the previous "
"search.  "
msgstr ""
"搜索命令辅助说明\n"
"\n"
" 首先输入您想要搜索的字符串或字符，然后按下回车键。如果存在着符合您所输入的文"
"字，画面就会更新到最合乎搜索字符串的位置。\n"
"\n"
"最近一次搜索的字符串将会显示在搜索提示符后的括号中。不输入任何文字而直接按下"
"回车键则会重复使用最近一次的搜索条件。  "

#: src/help.c:63
msgid ""
"If you have selected text with the mark and then search to replace, only "
"matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已经用标记选择了一段文字并进行搜索替换，就只有在选择文字中符合者将会被"
"替换。\n"
"\n"
" 以下的功能键可用于搜索模式：\n"
"\n"

#: src/help.c:69
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter.  If there are "
"fewer lines of text than the number you entered, you will be brought to the "
"last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"跳行辅助说明\n"
"\n"
" 首先输入您想去的行数编号并按下回车键。如果文章中的行数比您所输入少，您将会被"
"带至文件的最后一行。\n"
"\n"
" 以下的功能键可用于跳行模式：\n"
"\n"

#: src/help.c:78
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at "
"the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable "
"multiple file buffers with the -F or --multibuffer command line flags, the "
"Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded "
"into a separate buffer (use Meta-< and > to switch between file buffers).  "
msgstr ""
"插入文件辅助说明\n"
"\n"
" 先把文件的名称键入，它将会插入在当前缓冲区的游标所在之处。\n"
"\n"
" 如果您所编译的 nano 支持多重文件缓冲区，并且将此功能以命令列旗标-F 或--"
"multibuffer、Meta-F 开关，或者 nanorc 文件来启动的话，所插入的文件 将会被载入"
"另外的缓冲区中 (利用 Meta-< 和 > 在文件缓冲区间切换)。 "

#: src/help.c:87
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a "
"nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一个空的缓冲区，那就不要输入任何文件名，或是在提示符号后键入一个"
"不存在的文件名，然后按下回车键。\n"
"\n"
" 以下的功能键可用于插入文件模式：\n"
"\n"

#: src/help.c:93
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to "
"save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only "
"the selected portion to a separate file.  To reduce the chance of "
"overwriting the current file with just a portion of it, the current filename "
"is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"写入文件辅助说明\n"
"\n"
" 先键入您想要以此来储存当前文件的名称，并按下回车键来储存文件。\n"
"\n"
" 如果已经用标记选择了文字，那么您将会被提示，只储存标记部份到另外的档案。为了"
"降低当前文件只被其中部份覆盖的机会，在此模式下，当前的文件名不会成为默认"
"值。\n"
"\n"
" 以下的功能键可用于写入文件模式：\n"
"\n"

#: src/help.c:107
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to "
"select a file for reading or writing.  You may use the arrow keys or Page Up/"
"Down to browse through the files, and S or Enter to choose the selected file "
"or enter the selected directory.  To move up one level, select the directory "
"called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"文件选单辅助说明\n"
"\n"
" 文件选单是用来视觉化浏览目录结构，以选取要读出或写入的文件。您可以 使用上下"
"左右键或上页/下页来浏览，并用S 或回车键来选取所要的文件或者进入所选的目录。要"
"跳到上层时，选择在文件列表顶端名为 \"..\" 的目录。\n"
"\n"
" 以下的功能键可用于文件选单：\n"
"\n"

#: src/help.c:120
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter.  If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt.  Hitting Enter without entering any text will perform the previous "
"search.\n"
"\n"
msgstr ""
"搜索命令辅助说明\n"
"\n"
" 首先输入您想要搜索的字符串或字符，然后按下回车键。如果存在著 符合您所输入的"
"文字，画面就会更新到最合乎搜索字符串的位置。\n"
"\n"
" 最近一次搜索的字符串将会显示在搜索提示符号后面的括号中。不输入任何文字而直接"
"按下回车键则会重复最近一次的搜索条件。\n"
"\n"

#: src/help.c:129
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""
"在搜索模式可使用如下的功能键：\n"
"\n"

#: src/help.c:133
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to "
"(attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"跳至目录辅助说明\n"
"\n"
" 先输入您想要浏览的目录名称。\n"
"\n"
" 如果制表符补全的功能没有被关闭，您可以利用制表符(尝试)自动补全目录名称。\n"
"\n"
" 以下的功能键可用于跳至目录模式：\n"
"\n"

#: src/help.c:146
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file.  "
"When an unknown word is encountered, it is highlighted and a replacement can "
"be edited.  It will then prompt to replace every instance of the given "
"misspelled word in the current file, or, if you have selected text with the "
"mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼写检查辅助说明\n"
"\n"
" 拼写检查程序会检查当前文件中所有文字的拼法。当遇到一个未知的字，它会 被标记"
"起来，并让您编辑替代文字。对于当前文件中每一个拼错的字，都会显示 替换的提示；"
"或者，如果已经用标记选择了文字的话，那就只作用于选取的文字之中。\n"
"\n"
" 以下的功能键可用于拼写检查模式：\n"
"\n"

#: src/help.c:161
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell "
"into the current buffer (or into a new buffer).  If the command is preceded "
"by '|' (the pipe symbol), the current contents of the buffer (or marked "
"region) will be piped to the command.  "
msgstr ""
"执行命令辅助说明\n"
"\n"
" 本选单允许您将 shell 执行的命令输出结果，插入当前的缓冲区（或是插入一个新缓"
"冲区）。  如果命令前输入了一个“|”字符（管道符号），则当前缓冲区中的内容（或者"
"标记的区域）将通过管道提供给对应命令。  "

#: src/help.c:167
msgid ""
"If you just need another blank buffer, do not enter any command.\n"
"\n"
" You can also pick one of four tools, or cut a large piece of the buffer, or "
"put the editor to sleep.\n"
"\n"
msgstr ""
"如果您只是需要将其作为另一个空白缓冲区，则不必输入任何命令。\n"
"\n"
"您也可以选择四个工具之一，或是切出一大块缓冲区，或是令编辑器处于闲置状态。\n"

#: src/help.c:170
msgid ""
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
"在执行模式可使用如下的功能键：\n"
"\n"

#: src/help.c:173
msgid ""
"=== Linter ===\n"
"\n"
" In this mode, the status bar shows an error message or warning, and the "
"cursor is put at the corresponding position in the file.  With PageUp and "
"PageDown you can switch to earlier and later messages.\n"
"\n"
msgstr ""
"=== 代码语法检查 ===\n"
"\n"
" 在此模式下，状态栏显示警告或错误消息，游标将定位在文件的对应位置。  您可以使"
"用向上翻页或向下翻页键切换更前或更后的消息。\n"
"\n"

#: src/help.c:178
msgid ""
" The following function keys are available in Linter mode:\n"
"\n"
msgstr ""
"在代码语法检查模式可使用如下的功能键：\n"
"\n"

#: src/help.c:185
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of "
"the UW Pico text editor.  There are four main sections of the editor.  The "
"top line shows the program version, the current filename being edited, and "
"whether or not the file has been modified.  Next is the main editor window "
"showing the file being edited.  The status line is the third line from the "
"bottom and shows important messages.  "
msgstr ""
"nano 主帮助文档\n"
"\n"
" nano 编辑器被设计用来模仿华盛顿大学 Pico 文本编辑器，  且具有类似的功能性与"
"易用性。它包括四个主要部分：  顶行显示程序版本、当前被编辑的文件名以及该文件"
"是否已被修改。  接着是主要编辑区，显示正在编辑的文件。  状态行位于倒数第三"
"行，用来显示重要的信息。  "

#: src/help.c:195
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" Shortcuts are written as follows: Control-key sequences are notated with a "
"'^' and can be entered either by using the Ctrl key or pressing the Esc key "
"twice.  Meta-key sequences are notated with 'M-' and can be entered using "
"either the Alt, Cmd, or Esc key, depending on your keyboard setup.  "
msgstr ""
"底部的两行显示了编辑器中最常用的快捷键。\n"
"\n"
" 快捷键用如下方式进行表示：控制键序列使用一个“^”符号标记，它可以用 Ctrl 键或"
"按 Esc 键两次的方式进行输入。Meta 键序列使用“M-”符号标记，它可以用 Alt、Cmd "
"或 Esc 键输入，具体取决于您的键盘设置。  "

#: src/help.c:202
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from "
"000 to 255 will enter the character with the corresponding value.  The "
"following keystrokes are available in the main editor window.  Alternative "
"keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外，按 Esc 两次之后再键入从 000 到 255 之间的三位数字，则会输入该 ASCII 码"
"对应的字符。下列按键组合可用于主要编辑区，替代按键则显示于括号内：\n"
"\n"

#: src/help.c:234 src/help.c:306
msgid "enable/disable"
msgstr "启用/关闭"

#: src/help.c:574 src/nano.c:1590
msgid "^W = Ctrl+W    M-W = Alt+W"
msgstr "^W = Ctrl+W    M-W = Alt+W"

#: src/history.c:266
#, c-format
msgid ""
"Unable to create directory %s: %s\n"
"It is required for saving/loading search history or cursor positions.\n"
msgstr ""
"无法创建目录 %s：%s\n"
"然而保存和载入搜索历史或光标位置需要它。\n"

#: src/history.c:273
#, c-format
msgid ""
"Path %s is not a directory and needs to be.\n"
"Nano will be unable to load or save search history or cursor positions.\n"
msgstr ""
"路径 %s 应为一个目录，但现在不是。\n"
"Nano 将无法载入或保存搜索历史或光标位置。\n"

#: src/nano.c:200
msgid "Key is invalid in view mode"
msgstr "观看模式中此按键无效"

#: src/nano.c:207
msgid "This function is disabled in restricted mode"
msgstr "在限制模式中此功能被禁用"

#: src/nano.c:299
msgid "No file name"
msgstr "无文件名"

#: src/nano.c:301
msgid "Save modified buffer? "
msgstr "保存已修改的缓冲区？"

#: src/nano.c:327
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"缓冲内容已写入 %s\n"

#: src/nano.c:329
#, c-format
msgid ""
"\n"
"Buffer not written to %s: %s\n"
msgstr ""
"\n"
"缓冲内容未写入至 %s：%s\n"

#: src/nano.c:332
#, c-format
msgid ""
"\n"
"Too many .save files"
msgstr ""
"\n"
".save 文件太多"

#: src/nano.c:487
#, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE[,COLUMN]] FILE]...\n"
"\n"
msgstr ""
"用法: nano [选项] [[+行[,列]] 文件名]...\n"
"\n"

#. TRANSLATORS: The next two strings are part of the --help output.
#. * It's best to keep its lines within 80 characters.
#: src/nano.c:491
#, c-format
msgid ""
"To place the cursor on a specific line of a file, put the line number with\n"
"a '+' before the filename.  The column number can be added after a comma.\n"
msgstr ""
"如需启动时将游标置放在文件的特定行上，请在文件名前使用“+”符号加上行号以\n"
"进行指定。如需同时指定特定列，可以在其后添加半角逗号和列号。\n"

#: src/nano.c:493
#, c-format
msgid ""
"When a filename is '-', nano reads data from standard input.\n"
"\n"
msgstr ""
"当文件名为“-”时，nano 从标准输入读取数据。\n"
"\n"

#. TRANSLATORS: The next three are column headers of the --help output.
#: src/nano.c:495
msgid "Option"
msgstr "选项"

#: src/nano.c:495
msgid "Long option"
msgstr "长选项"

#: src/nano.c:495
msgid "Meaning"
msgstr "意义"

#. TRANSLATORS: The next forty or so strings are option descriptions
#. * for the --help output.  Try to keep them at most 40 characters.
#: src/nano.c:498
msgid "Enable smart home key"
msgstr "启用智能 HOME 键"

#: src/nano.c:500
msgid "Save backups of existing files"
msgstr "储存既有文件的备份"

#: src/nano.c:501
msgid "-C <dir>"
msgstr "-C <目录>"

#: src/nano.c:501
msgid "--backupdir=<dir>"
msgstr "--backupdir=<目录>"

#: src/nano.c:502
msgid "Directory for saving unique backup files"
msgstr "用以储存独一备份文件的目录"

#: src/nano.c:505
msgid "Use bold instead of reverse video text"
msgstr "用粗体替代颜色反转"

#: src/nano.c:507
msgid "Convert typed tabs to spaces"
msgstr "将已输入的制表符转换为空白"

#: src/nano.c:512
msgid "Read a file into a new buffer by default"
msgstr "默认从文件读入到一个新的缓冲区"

#: src/nano.c:515
msgid "Use (vim-style) lock files"
msgstr "使用（vim 风格）锁文件"

#: src/nano.c:520
msgid "Log & read search/replace string history"
msgstr "记录与读取搜索/替换的历史字符串"

#: src/nano.c:523
msgid "Don't look at nanorc files"
msgstr "不要参考 nanorc 文件"

#: src/nano.c:526
msgid "-J <number>"
msgstr "-J <数字>"

#: src/nano.c:526
msgid "--guidestripe=<number>"
msgstr "--guidestripe=<数字>"

#: src/nano.c:527
msgid "Show a guiding bar at this column"
msgstr "在此栏显示一个导引条"

#: src/nano.c:530
msgid "Fix numeric keypad key confusion problem"
msgstr "修正数字键区按键混淆问题"

#: src/nano.c:533
msgid "Don't add an automatic newline"
msgstr "不要自动添加换行符"

#: src/nano.c:537
msgid "Trim tail spaces when hard-wrapping"
msgstr "强制折行时移除末尾空白"

#: src/nano.c:541
msgid "Don't convert files from DOS/Mac format"
msgstr "不要从 DOS/Mac 格式转换"

#: src/nano.c:543
msgid "Leading whitespace means new paragraph"
msgstr "以空白字符起始表示新的段落"

#: src/nano.c:548
msgid "Log & read location of cursor position"
msgstr "记录并读取光标位置"

#: src/nano.c:551
msgid "-Q <regex>"
msgstr "-Q <正则表达式>"

#: src/nano.c:551
msgid "--quotestr=<regex>"
msgstr "--quotestr=<正则表达式>"

#. TRANSLATORS: This refers to email quoting,
#. * like the > in: > quoted text.
#: src/nano.c:554
msgid "Regular expression to match quoting"
msgstr "匹配引用的正则表达式"

#: src/nano.c:557
msgid "Restrict access to the filesystem"
msgstr "限制对文件系统的访问"

#: src/nano.c:559
msgid "Display overlong lines on multiple rows"
msgstr "以多行显示过长的行"

#: src/nano.c:560
msgid "-T <number>"
msgstr "-T <数字>"

#: src/nano.c:560
msgid "--tabsize=<number>"
msgstr "--tabsize=<数字>"

#: src/nano.c:561
msgid "Make a tab this number of columns wide"
msgstr "令制表符宽度为指定行数"

#: src/nano.c:563
msgid "Wipe status bar upon next keystroke"
msgstr "在下一次按键后清除状态栏内容"

#: src/nano.c:564
msgid "Print version information and exit"
msgstr "显示版本信息并离开"

#: src/nano.c:567
msgid "Detect word boundaries more accurately"
msgstr "更正确地侦测单字边界"

#: src/nano.c:568
msgid "-X <string>"
msgstr "-X <字符串>"

#: src/nano.c:568
msgid "--wordchars=<string>"
msgstr "--wordchars=<字符串>"

#: src/nano.c:569
msgid "Which other characters are word parts"
msgstr "指定哪些其它特殊字符也是单词的一部分"

#: src/nano.c:573
msgid "-Y <name>"
msgstr "-Y <名称>"

#: src/nano.c:573
msgid "--syntax=<name>"
msgstr "--syntax=<名称>"

#: src/nano.c:574
msgid "Syntax definition to use for coloring"
msgstr "用于加亮的语法定义"

#: src/nano.c:577
msgid "Let Bsp and Del erase a marked region"
msgstr "让退格键和删除键清除选中的区域"

#: src/nano.c:578
msgid "When soft-wrapping, do it at whitespace"
msgstr "软折行时在空白处进行"

#: src/nano.c:581
msgid "Automatically hard-wrap overlong lines"
msgstr "对过长的行自动强制换行"

#: src/nano.c:583
msgid "Constantly show cursor position"
msgstr "持续显示游标位置"

#: src/nano.c:585
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正退格键/删除键混淆问题"

#: src/nano.c:587
msgid "Keep the line below the title bar empty"
msgstr "保持标题栏下面的行一直为空"

#: src/nano.c:590
msgid "-f <file>"
msgstr "-f <文件>"

#: src/nano.c:590
msgid "--rcfile=<file>"
msgstr "--rcfile=<文件>"

#: src/nano.c:591
msgid "Use only this file for configuring nano"
msgstr "只使用这个文件配置 nano"

#: src/nano.c:594
msgid "Show cursor in file browser & help text"
msgstr "在文件浏览器和帮助文本中显示游标"

#: src/nano.c:596
msgid "Show this help text and exit"
msgstr "显示本帮助文本并退出"

#: src/nano.c:598
msgid "Automatically indent new lines"
msgstr "自动缩进新行"

#: src/nano.c:599
msgid "Scroll per half-screen, not per line"
msgstr "按半屏幕滚动文本，不按行"

#: src/nano.c:600
msgid "Cut from cursor to end of line"
msgstr "从游标剪切至行尾"

#: src/nano.c:603
msgid "Show line numbers in front of the text"
msgstr "在文本之前显示行号"

#: src/nano.c:606
msgid "Enable the use of the mouse"
msgstr "启用鼠标功能"

#: src/nano.c:609
msgid "Do not read the file (only write it)"
msgstr "不要读取文件（仅写入）"

#: src/nano.c:612
msgid "-o <dir>"
msgstr "-o <目录>"

#: src/nano.c:612
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=<目录>"

#: src/nano.c:613
msgid "Set operating directory"
msgstr "设定操作目录"

#: src/nano.c:615
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留XON (^Q) 和XOFF (^S) 按键"

#: src/nano.c:617
msgid "Show a position+portion indicator"
msgstr "显示位置+部分指示器"

#: src/nano.c:620
msgid "-r <number>"
msgstr "-r <数字>"

#: src/nano.c:620
msgid "--fill=<number>"
msgstr "--fill=<数字>"

#: src/nano.c:621
msgid "Set width for hard-wrap and justify"
msgstr "设置强制换行宽度并进行重排"

#: src/nano.c:625
msgid "-s <program>"
msgstr "-s <程序>"

#: src/nano.c:625
msgid "--speller=<program>"
msgstr "--speller=<程序>"

#: src/nano.c:626
msgid "Use this alternative spell checker"
msgstr "使用此替代的拼写检查程序"

#: src/nano.c:628
msgid "Save changes on exit, don't prompt"
msgstr "退出时自动保存修改，不要提示"

#: src/nano.c:630
msgid "Save a file by default in Unix format"
msgstr "默认将文件保存为 Unix 格式"

#: src/nano.c:632
msgid "View mode (read-only)"
msgstr "查看（只读）模式"

#: src/nano.c:634
msgid "Don't hard-wrap long lines [default]"
msgstr "不要为过长行强制折行 [默认]"

#: src/nano.c:636
msgid "Don't show the two help lines"
msgstr "不要显示辅助区"

#: src/nano.c:638
msgid "Make Ctrl+Right stop at word ends"
msgstr "使 Ctrl+Right 在单词末尾处停止"

#: src/nano.c:641
msgid "Enable suspension"
msgstr "启用挂起功能"

#: src/nano.c:643
msgid "Show some states on the title bar"
msgstr "在标题栏显示某些状态"

#: src/nano.c:644
msgid "Show a feedback bar at the bottom"
msgstr "在底部显示一个反馈条"

#: src/nano.c:647
msgid "Also try magic to determine syntax"
msgstr "也尝试自动推测语法"

#: src/nano.c:658
#, c-format
msgid " GNU nano, version %s\n"
msgstr " GNU nano，版本 %s\n"

#: src/nano.c:662
#, c-format
msgid " (C) 2014-%s the contributors to nano\n"
msgstr " (C) 2014-%s nano 贡献者\n"

#: src/nano.c:664
#, c-format
msgid " Compiled options:"
msgstr " 编译选项："

#: src/nano.c:813
msgid "Could not reconnect stdin to keyboard\n"
msgstr "无法从键盘设备重新连接标准输入\n"

#: src/nano.c:831
#, c-format
msgid "Reading data from keyboard; type ^D or ^D^D to finish.\n"
msgstr "正在从键盘读取数据；输入 ^D 或 ^D^D 以结束。\n"

#: src/nano.c:841
#, c-format
msgid "Failed to open stdin: %s"
msgstr "打开标准输入失败：%s"

#: src/nano.c:918
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到 SIGHUP 或 SIGTERM\n"

#: src/nano.c:925
#, c-format
msgid "Sorry! Nano crashed!  Code: %d.  Please report a bug.\n"
msgstr "抱歉！Nano 崩溃了！代码：%d。请报告这个问题。\n"

#: src/nano.c:940
#, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "使用 \"fg\" 返回 nano。\n"

#: src/nano.c:956
msgid "Suspension is not enabled"
msgstr "挂起功能未启用"

#: src/nano.c:1122
msgid "enabled"
msgstr "已启用"

#: src/nano.c:1122
msgid "disabled"
msgstr "已禁用"

#. TRANSLATORS: This refers to a sequence of escape codes
#. * (from the keyboard) that nano does not recognize.
#: src/nano.c:1267
msgid "Unknown sequence"
msgstr "未知序列"

#: src/nano.c:1269
msgid "Unbound key"
msgstr "按键未绑定"

#: src/nano.c:1273
#, c-format
msgid "Unbindable key: M-^%c"
msgstr "不可绑定的按键：M-^%c"

#: src/nano.c:1278
#, c-format
msgid "Unbound key: Sh-M-%c"
msgstr "按键未绑定：Sh-M-%c"

#: src/nano.c:1281
#, c-format
msgid "Unbound key: M-%c"
msgstr "按键未绑定：M-%c"

#: src/nano.c:1283
msgid "Unbindable key: ^["
msgstr "不可绑定的按键：^["

#: src/nano.c:1285
#, c-format
msgid "Unbound key: ^%c"
msgstr "按键未绑定：^%c"

#: src/nano.c:1288
#, c-format
msgid "Unbound key: %c"
msgstr "按键未绑定：%c"

#: src/nano.c:1869 src/rcfile.c:1633
#, c-format
msgid "Guide column \"%s\" is invalid"
msgstr "指导栏“%s”无效"

#: src/nano.c:1916 src/rcfile.c:1638
#, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所要求的制表符宽度%s 无效"

#: src/nano.c:2020 src/rcfile.c:1583
#, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所要求的填满行数\"%s\" 无效"

#: src/nano.c:2075
#, c-format
msgid "Type '%s -h' for a list of available options.\n"
msgstr "输入“%s -h”以获取所有可用选项的列表。\n"

#: src/nano.c:2265
#, c-format
msgid "Bad quoting regex \"%s\": %s\n"
msgstr "非法的正则表达式 \"%s\": %s\n"

#: src/nano.c:2419
#, c-format
msgid "Invalid search modifier '%c'"
msgstr "无效的搜索修饰符“%c”"

#: src/nano.c:2430
msgid "Empty search string"
msgstr "空搜索字符串"

#: src/nano.c:2435 src/search.c:787
msgid "Invalid line or column number"
msgstr "无效的列号或行号"

#: src/nano.c:2497
msgid "Can open just one file\n"
msgstr "无法只打开一个文件\n"

#: src/nano.c:2510
msgid "Welcome to nano.  For basic help, type Ctrl+G."
msgstr "欢迎使用 nano。  如需基本帮助信息，请按下 Ctrl+G。"

#. TRANSLATORS: For the next three strings, specify the starting letters
#. * of the translations for "Yes"/"No"/"All".  The first letter of each of
#. * these strings MUST be a single-byte letter; others may be multi-byte.
#: src/prompt.c:652
msgid "Yy"
msgstr "Yy"

#: src/prompt.c:653
msgid "Nn"
msgstr "Nn"

#: src/prompt.c:654
msgid "Aa"
msgstr "Aa"

#: src/prompt.c:678
msgid "Yes"
msgstr "是"

#: src/prompt.c:682
msgid "No"
msgstr "否"

#: src/prompt.c:687
msgid "All"
msgstr "全部"

#: src/rcfile.c:205
#, c-format
msgid "Mistakes in '%s'"
msgstr "“%s”中的错误"

#: src/rcfile.c:209
msgid "Problems with history file"
msgstr "历史文件存在的问题"

#: src/rcfile.c:213
#, c-format
msgid "Error in %s on line %zu: "
msgstr "在 %s（第 %zu 行）中发生错误："

#: src/rcfile.c:564
#, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "参数%s 有未封闭的 \""

#: src/rcfile.c:585 src/rcfile.c:596
msgid "Regex strings must begin and end with a \" character"
msgstr "正则表达式字符串必须以 \" 字符开始及结束"

#: src/rcfile.c:601
msgid "Empty regex string"
msgstr "空正则表达式字符串"

#: src/rcfile.c:626 src/search.c:45
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "非法的正则表达式 \"%s\": %s"

#: src/rcfile.c:648
msgid "Missing syntax name"
msgstr "缺少语法名称"

#: src/rcfile.c:656
msgid "Unpaired quote in syntax name"
msgstr "语法名称中的未配对引用"

#: src/rcfile.c:668
msgid "The \"none\" syntax is reserved"
msgstr "\"none\" 语法已被保留"

#: src/rcfile.c:699
msgid "The \"default\" syntax does not accept extensions"
msgstr "默认“default”语法不接受扩展"

#: src/rcfile.c:717
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr "语法“%s”没有color 命令"

#: src/rcfile.c:748
msgid "Missing key name"
msgstr "缺少键名称"

#: src/rcfile.c:764 src/rcfile.c:771
#, c-format
msgid "Key name %s is invalid"
msgstr "键名称 %s 无效"

#: src/rcfile.c:780
msgid "Must specify a function to bind the key to"
msgstr "必须指定键绑定到的功能"

#. TRANSLATORS: Do not translate the word "all".
#: src/rcfile.c:791
msgid "Must specify a menu (or \"all\") in which to bind/unbind the key"
msgstr "必须指定一个要绑定/接触绑定按键的菜单（或“全部（all）”）"

#: src/rcfile.c:810
#, c-format
msgid "Cannot map name \"%s\" to a function"
msgstr "无法映射名字“%s”到一个功能"

#: src/rcfile.c:817
#, c-format
msgid "Cannot map name \"%s\" to a menu"
msgstr "无法映射名字“%s”到一个菜单"

#: src/rcfile.c:855
#, c-format
msgid "Function '%s' does not exist in menu '%s'"
msgstr "功能“%s”在菜单“%s”中不存在"

#: src/rcfile.c:866
#, c-format
msgid "Keystroke %s may not be rebound"
msgstr "按键 %s 无法重新绑定"

#: src/rcfile.c:957 src/rcfile.c:1488
#, c-format
msgid "Command \"%s\" not understood"
msgstr "无法识别“%s”命令"

#: src/rcfile.c:993
#, c-format
msgid "Error expanding %s: %s"
msgstr "展开 %s 出错：%s"

#: src/rcfile.c:1043
#, c-format
msgid "Color '%s' takes no prefix"
msgstr "颜色“%s”不接受前缀"

#: src/rcfile.c:1051
#, c-format
msgid "Color \"%s\" not understood"
msgstr "无法识别颜色“%s”"

#: src/rcfile.c:1067 src/rcfile.c:1078
msgid "An attribute requires a subsequent comma"
msgstr "属性需要后接一个逗号"

#: src/rcfile.c:1122
msgid "Missing color name"
msgstr "缺少颜色名称"

#: src/rcfile.c:1133 src/rcfile.c:1233
#, c-format
msgid "Missing regex string after '%s' command"
msgstr "“%s”命令后缺少正则表达式字符串"

#: src/rcfile.c:1159
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求对应的\"end=\""

#: src/rcfile.c:1222 src/rcfile.c:1468
#, c-format
msgid "A '%s' command requires a preceding 'syntax' command"
msgstr "“%s”命令需要一个前导 \"syntax\" 命令"

#: src/rcfile.c:1228
#, c-format
msgid "The \"default\" syntax does not accept '%s' regexes"
msgstr "\"default\" 语法不接受“%s”正则表达式"

#: src/rcfile.c:1273
#, c-format
msgid "Missing argument after '%s'"
msgstr "“%s”后缺少参数"

#: src/rcfile.c:1283
#, c-format
msgid "Argument of '%s' lacks closing \""
msgstr "“%s”的参数缺少封闭的 \""

#: src/rcfile.c:1331
#, c-format
msgid "No key is bound to function '%s' in menu '%s'.  Exiting.\n"
msgstr "没有绑定到功能“%s”的按键（在菜单“%s”中）。退出。\n"

#: src/rcfile.c:1333
msgid ""
"If needed, use nano with the -I option to adjust your nanorc settings.\n"
msgstr "如有需要，请在启动 nano 时带上 -I 选项以调整您的 nanorc 设置。\n"

#: src/rcfile.c:1400
#, c-format
msgid "Could not find syntax \"%s\" to extend"
msgstr "无法找到要扩展的语法“%s”"

#: src/rcfile.c:1457
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr "命令“%s”被禁止在包含文件中使用"

#: src/rcfile.c:1500
msgid "Missing option"
msgstr "缺少选项"

#: src/rcfile.c:1514
#, c-format
msgid "Unknown option \"%s\""
msgstr "未知选项“%s”"

#: src/rcfile.c:1529
#, c-format
msgid "Cannot unset option \"%s\""
msgstr "无法解除选项设定“%s”"

#: src/rcfile.c:1534
#, c-format
msgid "Option \"%s\" requires an argument"
msgstr "选项%s 需要参数"

#: src/rcfile.c:1546
msgid "Argument is not a valid multibyte string"
msgstr "参数并非有效的多字节字符串"

#: src/rcfile.c:1591 src/rcfile.c:1609 src/rcfile.c:1614
msgid "Non-blank characters required"
msgstr "需要非空格字符"

#: src/rcfile.c:1593
msgid "Even number of characters required"
msgstr "需要偶数个字符"

#: src/rcfile.c:1598
msgid "Two single-column characters required"
msgstr "需要两个单行字符"

#: src/rcfile.c:1688
msgid "Specified rcfile does not exist\n"
msgstr "所指定的 rc 文件不存在\n"

#: src/rcfile.c:1707
msgid "I can't find my home directory!  Wah!"
msgstr "我找不到我的家目录！哇！"

#. TRANSLATORS: The next four modify the search prompt.
#: src/search.c:99
msgid " [Case Sensitive]"
msgstr " [区分大小写]"

#: src/search.c:100
msgid " [Regexp]"
msgstr " [正则表达式]"

#: src/search.c:104
msgid " (to replace) in selection"
msgstr " 在标记中(替换)"

#: src/search.c:106
msgid " (to replace)"
msgstr " (替换)"

#. TRANSLATORS: This is shown when searching takes
#. * more than half a second.
#: src/search.c:230 src/search.c:303
msgid "Searching..."
msgstr "正在搜索..."

#: src/search.c:408
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到 \"%.*s%s\""

#. TRANSLATORS: This is a prompt.
#: src/search.c:600
msgid "Replace this instance?"
msgstr "替换这个？"

#. TRANSLATORS: This is a prompt.
#: src/search.c:714
msgid "Replace with"
msgstr "替换为"

#: src/search.c:739
#, c-format
msgid "Replaced %zd occurrence"
msgid_plural "Replaced %zd occurrences"
msgstr[0] "已替换 %zd 处"

#. TRANSLATORS: This is a prompt.
#: src/search.c:766
msgid "Enter line number, column number"
msgstr "输入列号，行号"

#: src/search.c:935
msgid "Not a bracket"
msgstr "并非一个括号"

#: src/search.c:978
msgid "No matching bracket"
msgstr "无对应括号"

#: src/search.c:993
msgid "Placed anchor"
msgstr "已放置的锚点"

#: src/search.c:995
msgid "Removed anchor"
msgstr "已移除的锚点"

#: src/search.c:1007
msgid "Jumped to anchor"
msgstr "跳转到锚点"

#: src/search.c:1009
msgid "This is the only anchor"
msgstr "这是唯一的锚点"

#: src/search.c:1011
msgid "There are no anchors"
msgstr "没有锚点"

#: src/text.c:54
msgid "Mark Set"
msgstr "标记设定"

#: src/text.c:57
msgid "Mark Unset"
msgstr "标记解除"

#: src/text.c:390
msgid "Commenting is not supported for this file type"
msgstr "该文件类型不支持做注释"

#: src/text.c:400
msgid "Cannot comment past end of file"
msgstr "无法注释越过文件末尾"

#: src/text.c:522
msgid "Nothing to undo"
msgstr "没有可重做的操作"

#. TRANSLATORS: The next thirteen strings describe actions
#. * that are undone or redone.  They are all nouns, not verbs.
#: src/text.c:533 src/text.c:595 src/text.c:714 src/text.c:776
msgid "addition"
msgstr "添加"

#: src/text.c:541 src/text.c:726
msgid "line break"
msgstr "换行"

#: src/text.c:557 src/text.c:738
msgid "deletion"
msgstr "删除"

#: src/text.c:567 src/text.c:744
msgid "line join"
msgstr "行合并"

#: src/text.c:585 src/text.c:759
msgid "replacement"
msgstr "替换"

#: src/text.c:605 src/text.c:780
msgid "erasure"
msgstr "清除"

#. TRANSLATORS: Remember: these are nouns, NOT verbs.
#: src/text.c:611 src/text.c:785
msgid "cut"
msgstr "剪切"

#: src/text.c:615 src/text.c:789
msgid "paste"
msgstr "粘贴"

#: src/text.c:622 src/text.c:793
msgid "insertion"
msgstr "插入"

#: src/text.c:651 src/text.c:816
msgid "indent"
msgstr "缩进"

#: src/text.c:655 src/text.c:820
msgid "unindent"
msgstr "取消缩进"

#: src/text.c:660 src/text.c:825
msgid "comment"
msgstr "注释"

#: src/text.c:664 src/text.c:829
msgid "uncomment"
msgstr "取消注释"

#: src/text.c:672
#, c-format
msgid "Undid %s"
msgstr "已撤销 %s"

#: src/text.c:701
msgid "Nothing to redo"
msgstr "没有可重做的操作"

#: src/text.c:837
#, c-format
msgid "Redid %s"
msgstr "已重做 %s"

#. TRANSLATORS: This one goes with Undid/Redid messages.
#: src/text.c:1776 src/text.c:1990
msgid "justification"
msgstr "对齐"

#: src/text.c:1787 src/text.c:2107
msgid "Selection is empty"
msgstr "选择为空"

#: src/text.c:1999
msgid "Justified selection"
msgstr "已对齐选中内容"

#: src/text.c:2003
msgid "Justified file"
msgstr "已对齐文件"

#: src/text.c:2005
msgid "Justified paragraph"
msgstr "已对齐段落"

#: src/text.c:2110
msgid "Buffer is empty"
msgstr "缓冲区为空"

#: src/text.c:2148 src/text.c:2734
#, c-format
msgid "Error invoking '%s'"
msgstr "调用 '%s' 出现错误"

#: src/text.c:2152
#, c-format
msgid "Program '%s' complained"
msgstr "程序“%s”提示"

#: src/text.c:2160
msgid "Nothing changed"
msgstr "数据未被修改"

#. TRANSLATORS: The next two go with Undid/Redid messages.
#: src/text.c:2189
msgid "spelling correction"
msgstr "拼写检查"

#: src/text.c:2189
msgid "formatting"
msgstr "正在格式化"

#: src/text.c:2208 src/text.c:2495
msgid "Finished checking spelling"
msgstr "拼写检查结束"

#: src/text.c:2210
msgid "Buffer has been processed"
msgstr "缓冲区已处理"

#: src/text.c:2253
#, c-format
msgid "Unfindable word: %s"
msgstr "无法找到单词：%s"

#. TRANSLATORS: This is a prompt.
#: src/text.c:2272
msgid "Edit a replacement"
msgstr "编辑替代文字"

#. TRANSLATORS: Shown after fixing misspellings in one word.
#: src/text.c:2285
msgid "Next word..."
msgstr "下一个单词..."

#: src/text.c:2336
msgid "Invoking spell checker..."
msgstr "正在调用拼写检查器..."

#: src/text.c:2421 src/text.c:2642
msgid "Could not get size of pipe buffer"
msgstr "无法获取管道缓冲区大小"

#: src/text.c:2489
msgid "Error invoking \"uniq\""
msgstr "调用 \"uniq\" 出现错误"

#: src/text.c:2491
msgid "Error invoking \"sort\""
msgstr "调用 \"sort\" 出现错误"

#: src/text.c:2493
msgid "Error invoking \"spell\""
msgstr "调用 \"spell\" 出现错误"

#: src/text.c:2577
msgid "No linter is defined for this type of file"
msgstr "没有为该类型文件而定义的代码语法检查器"

#: src/text.c:2587
msgid "Save modified buffer before linting?"
msgstr "运行代码语法检查之前保存已修改的缓冲区吗？"

#: src/text.c:2604
msgid "Invoking linter..."
msgstr "正在调用代码语法检查器..."

#: src/text.c:2739
#, c-format
msgid "Got 0 parsable lines from command: %s"
msgstr "从命令 %s 获得了 0 行可解析的行"

#: src/text.c:2777
#, c-format
msgid "This message is for unopened file %s, open it in a new buffer?"
msgstr "该信息对应于未打开的文件 %s，在新缓冲区打开它吗？"

#: src/text.c:2816
msgid "No messages for this file"
msgstr "没有该文件的消息"

#: src/text.c:2866
msgid "At first message"
msgstr "在第一条消息"

#: src/text.c:2876
msgid "At last message"
msgstr "在最后一条消息"

#: src/text.c:2918
msgid "No formatter is defined for this type of file"
msgstr "没有为该类型文件而定义的代码语法检查器"

#: src/text.c:2995
#, c-format
msgid "%s%zd %s,  %zu %s,  %zu %s"
msgstr "%s%zd %s,  %zu %s,  %zu %s"

#: src/text.c:2996
msgid "In Selection:  "
msgstr "于选择部分："

#: src/text.c:2997
msgid "line"
msgid_plural "lines"
msgstr[0] "行"

#: src/text.c:2998
msgid "word"
msgid_plural "words"
msgstr[0] "词"

#: src/text.c:2999
msgid "character"
msgid_plural "characters"
msgstr[0] "字符"

#. TRANSLATORS: Shown when the next keystroke will be inserted verbatim.
#: src/text.c:3010
msgid "Verbatim Input"
msgstr "原形输入"

#. TRANSLATORS: An invalid verbatim Unicode code was typed.
#: src/text.c:3028
msgid "Invalid code"
msgstr "无效码点"

#. TRANSLATORS: Shown when no text is directly left of the cursor.
#: src/text.c:3104
msgid "No word fragment"
msgstr "没有单词片段"

#: src/text.c:3196
msgid "No further matches"
msgstr "没有更多匹配"

#. TRANSLATORS: Shown when there are zero possible completions.
#: src/text.c:3200
msgid "No matches"
msgstr "没有匹配"

#: src/utils.c:301 src/utils.c:316
msgid "Nano is out of memory!\n"
msgstr "Nano 已耗尽内存！\n"

#: src/winio.c:94
msgid "Recording a macro..."
msgstr "正在录制宏..."

#: src/winio.c:97
msgid "Stopped recording"
msgstr "停止录制"

#: src/winio.c:109
msgid "Cannot run macro while recording"
msgstr "录制时无法运行宏"

#: src/winio.c:115
msgid "Macro is empty"
msgstr "宏为空"

#: src/winio.c:224
msgid "Too many errors from stdin\n"
msgstr "标准输入含有太多错误\n"

#. TRANSLATORS: This is shown while a six-digit hexadecimal
#. * Unicode character code (%s) is being typed in.
#: src/winio.c:1340
#, c-format
msgid "Unicode Input: %s"
msgstr "Unicode 输入：%s"

#. TRANSLATORS: The next five are "labels" in the title bar.
#: src/winio.c:1950
msgid "Linting --"
msgstr "语法检查中 --"

#: src/winio.c:1956
msgid "DIR:"
msgstr "目录："

#: src/winio.c:1977
msgid "View"
msgstr "查看"

#: src/winio.c:1983 src/winio.c:1987
msgid "Modified"
msgstr "已更改"

#: src/winio.c:1985
msgid "Restricted"
msgstr "受限"

#: src/winio.c:2092
msgid "(nameless)"
msgstr "（无名称）"

#: src/winio.c:2118
#, c-format
msgid " (%zu line)"
msgid_plural " (%zu lines)"
msgstr[0] " (%zu 行)"

#: src/winio.c:3481
#, c-format
msgid "line %zd/%zd (%d%%), col %zu/%zu (%d%%), char %zu/%zu (%d%%)"
msgstr "行 %zd/%zd (%d%%)，列 %zu/%zu (%d%%)，字符 %zu/%zu (%d%%)"

#: src/winio.c:3633
msgid "The nano text editor"
msgstr "nano 文本编辑器"

#: src/winio.c:3634
msgid "version"
msgstr "版本"

#: src/winio.c:3635
msgid "Brought to you by:"
msgstr "来自于："

#: src/winio.c:3636
msgid "Special thanks to:"
msgstr "特别感谢："

#: src/winio.c:3637
msgid "The Free Software Foundation"
msgstr "自由软件基金会"

#: src/winio.c:3638
msgid "the many translators and the TP"
msgstr "TP 项目和众多翻译人员"

#: src/winio.c:3639
msgid "For ncurses:"
msgstr "ncurses 部分："

#: src/winio.c:3640
msgid "and anyone else we forgot..."
msgstr "以及其他我们不记得的人..."

#: src/winio.c:3641
msgid "Thank you for using nano!"
msgstr "感谢您使用 nano！"

#: lib/getopt.c:278
#, c-format
msgid "%s: option '%s%s' is ambiguous\n"
msgstr "%s：选项“%s%s”有歧义\n"

#: lib/getopt.c:284
#, c-format
msgid "%s: option '%s%s' is ambiguous; possibilities:"
msgstr "%s：选项“%s%s”有歧义；可能是："

#: lib/getopt.c:319
#, c-format
msgid "%s: unrecognized option '%s%s'\n"
msgstr "%s：无法识别的选项“%s%s”\n"

#: lib/getopt.c:345
#, c-format
msgid "%s: option '%s%s' doesn't allow an argument\n"
msgstr "%s：选项“%s%s”不允许带参数\n"

#: lib/getopt.c:360
#, c-format
msgid "%s: option '%s%s' requires an argument\n"
msgstr "%s：选项“%s%s”需要参数\n"

#: lib/getopt.c:621
#, c-format
msgid "%s: invalid option -- '%c'\n"
msgstr "%s：无效的选项 -- '%c'\n"

#: lib/getopt.c:636 lib/getopt.c:682
#, c-format
msgid "%s: option requires an argument -- '%c'\n"
msgstr "%s：选项需要一个参数 -- '%c'\n"

#: lib/regcomp.c:135
msgid "Success"
msgstr "成功"

#: lib/regcomp.c:138
msgid "No match"
msgstr "没有匹配"

#: lib/regcomp.c:141
msgid "Invalid regular expression"
msgstr "无效的正则表达式"

#: lib/regcomp.c:144
msgid "Invalid collation character"
msgstr "无效的字符序字符"

#: lib/regcomp.c:147
msgid "Invalid character class name"
msgstr "无效的字符类型名称"

#: lib/regcomp.c:150
msgid "Trailing backslash"
msgstr "末尾的反斜杠"

#: lib/regcomp.c:153
msgid "Invalid back reference"
msgstr "无效的后向引用"

#: lib/regcomp.c:156
msgid "Unmatched [, [^, [:, [., or [="
msgstr "不匹配的 [、[^、[:、[. 或 [="

#: lib/regcomp.c:159
msgid "Unmatched ( or \\("
msgstr "未匹配的 ( 或 \\("

#: lib/regcomp.c:162
msgid "Unmatched \\{"
msgstr "未匹配的 \\{"

#: lib/regcomp.c:165
msgid "Invalid content of \\{\\}"
msgstr "\\{\\} 的无效内容"

#: lib/regcomp.c:168
msgid "Invalid range end"
msgstr "无效的范围结束符"

#: lib/regcomp.c:171
msgid "Memory exhausted"
msgstr "内存耗尽"

#: lib/regcomp.c:174
msgid "Invalid preceding regular expression"
msgstr "无效的前置正则表达式"

#: lib/regcomp.c:177
msgid "Premature end of regular expression"
msgstr "正则表达式过早结束"

#: lib/regcomp.c:180
msgid "Regular expression too big"
msgstr "正则表达式过长"

#: lib/regcomp.c:183
msgid "Unmatched ) or \\)"
msgstr "未匹配的 ) 或 \\)"

#: lib/regcomp.c:676
msgid "No previous regular expression"
msgstr "缺少之前的正则表达式"