9f762df4e4
clean up a comment, delete unnecessary local variable in probe
1996-03-17 00:26:12 +00:00
2355d951e4
update for changes eisadevs contents
1996-03-17 00:18:59 +00:00
6dcbcf9649
clean up descriptions a bit
1996-03-17 00:18:46 +00:00
afb1eb7adc
update for changes eisadevs contents
1996-03-17 00:15:08 +00:00
97dc4ccd6c
add entries for the AMI 4801 SCSI controller, and add product numbers/names
...
for the BusLogic 74x[BC] SCSI controllers.
1996-03-17 00:13:56 +00:00
bca6f430a9
Make operator precedence explicit by parethesizing.
1996-03-16 23:19:14 +00:00
d2e6849829
fix printf() formats
1996-03-16 23:19:08 +00:00
88b335392c
rename asic_addr and nic_addr to asic_base and nic_base, in softc, as
...
they're base I/O ports, not really addresses. rather than using those
softc fields directly, assign local variables (asicbase, nicbase) to have
their values, and use those. (consistency, plus better optimization
potential in some cases.)
1996-03-16 07:24:15 +00:00
87abc9cdc7
Move contents of edprobe() into ed_find() -- they'll be used by edattach()
...
eventually. rename the probe functions for the various boards to 'find' for
consistency/correctness (but the generic8390 check is still a 'probe').
Add protos for ed_find(), ed_probe_generic8390(), ed_find_WD80x3(),
ed_find_3Com(), and ed_find_Novell(). Fix one minor space nit.
1996-03-16 06:41:20 +00:00
4beac8eab6
convert NIC_GET and NIC_PUT to take NIC base port address, rather than softc.
1996-03-16 06:18:39 +00:00
f3bac4c1fb
print out hardware type, and print firmware version more precisely.
...
Information about structures & commands to do this gleaned from
the FreeBSD bt driver.
1996-03-16 05:33:28 +00:00
c3361cbc2c
prototype bt_cmd(), using varargs/stdarg (ooh, ahh!). Fix up resulting
...
pointer warnings.
1996-03-16 04:37:40 +00:00
8b3873367f
add MediaVision Jazz16 chipset support. It must be configured with
...
'flags 1' on the sb? kernel configuration file line (because it frobs a
noncontiguous IO port to configure the Jazz16 extensions).
Also, remove static sb_device structure and fill in user's buffer on
each request.
1996-03-16 04:00:09 +00:00
76f1f884eb
convert to not assume existence of softc at probe time.
1996-03-16 03:20:25 +00:00
8b404fdede
A foolish consistency... General cleanup: get rid of spaces and tabs at
...
ends of lines, turn aligned blocks of eight spaces into tabs, name all
softc elements with the "sc_" prefix, and call the softc by the commonly
used name, "sc", when passing it around.
1996-03-16 02:54:27 +00:00
6668fa09a3
Change register definitions to be offset from the I/O base, rather than
...
complete I/O addresses. Access ports via "iobase + REGISTER."
1996-03-16 02:02:54 +00:00
2b96f0705b
delete unused cruft (the 'software conventions' chunk).
1996-03-16 02:00:43 +00:00
03b701e393
Bring prototypes into scope and fix compiler warnings.
1996-03-14 19:44:30 +00:00
e023a87a11
Bring prototypes into scope.
1996-03-14 19:05:07 +00:00
357fb0e430
- add and fix prototypes and warnings.
...
- remove nested comment in header file.
1996-03-14 19:02:30 +00:00
d5d2502bcb
fix types on a bunch of variables (were u_long's, now are U_INT32s or ncrcmds,
...
and a few other fixes). print pointers with %p, rather than casting to
(unsigned), which breaks on the Alpha.
1996-03-14 05:21:20 +00:00
ba6d1cb2dd
These devices don't actually need softc's that are supersets of 'struct
...
device.' No point in adding that complexity + space if they're not needed,
so axe them.
1996-03-14 04:02:58 +00:00
005569a6b3
include pcireg before pcivar.h
1996-03-14 03:04:17 +00:00
7fda077700
(1) provide #defines for cf_loc[] entries for devices that attach to
...
pcibus and pci.
(2) remove the #ifdef i386 from pci.c, and provide a machine-dependent
hook (pci_md_attach_hook()) to do any machine-dependent attachment
gunk, e.g. on the i386 printing out the configuration mode (if bus 0)
(3) don't pass max device number for a given bus in, use
PCI_MAX_DEVICE_NUMBER, which can be defined on a per-machine basis.
(defaults to 32. on i386, it's 32 if pci conf mode == 1, 16 if 2.)
1996-03-14 02:35:32 +00:00
68b00a8e52
RCS Id police
1996-03-14 02:30:30 +00:00
8d2afa9f27
RCS ID police; get rid of Id keyword.
1996-03-11 23:06:04 +00:00
2013e4059a
kill extraneous empty line in comment block at start of file
1996-03-11 23:05:47 +00:00
94fc5cf4ce
Resolve conflicts from merge.
1996-03-11 21:41:28 +00:00
2e4812fa65
New snapshot of DEC PDQ-based FDDI driver, from Matt Thomas.
1996-03-11 21:04:02 +00:00
ba91a74bb6
mostly convert to use interfaces provided by <machine/bus.h>. (For now,
...
assumes that pci_map_mem/pci_map_io provide interfaces which utilitize
bus_{io,mem}_handle_t's, or types which are compatible. This works on the
i386, and will change eventually anyway.)
1996-03-11 18:57:04 +00:00
046633ffe1
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
...
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 16:13:57 +00:00
6f00e88e73
mostly convert to use interfaces provided by <machine/bus.h>. (For now,
...
assumes that pci_map_mem/pci_map_io provide interfaces which utilitize
bus_{io,mem}_handle_t's, or types which are compatible. This works on the
i386, and will change eventually anyway.)
1996-03-11 15:07:06 +00:00
85286bff2f
convert these to use new <machine/bus.h> interfaces. This involved
...
substantial reworking of the multi-port drivers, as they need to frob
bits in the io-port spaces of their children. As a result, the
commulti->com attachment interface is substantially more complex.
(This may be fixable in the future by making some of the code common,
but as long as io-port allocation checking is planned, it's necessary.)
1996-03-10 09:01:20 +00:00
3a07f941ba
Check on which SBI we are frobbing, not always 0.
1996-03-09 23:38:34 +00:00
5bfb840114
Fix copyright year
1996-03-09 23:37:14 +00:00
f350b1aa9d
Fill in the missing pieces and make the NetBSD version of Matt Thomas's
...
DEFPA FDDI driver actually compile and link.
1996-03-09 03:46:21 +00:00
85288c6a61
Include comvar.h, for comprobe1() prototype and for commulti_attach_args.
...
Remove multiple identical definitions for the arg struct used by multiport
boards' to attach slave com ports.
1996-03-09 01:03:59 +00:00
a7c6dfe1cd
include comvar.h for comprobe1() prototype
1996-03-09 01:02:08 +00:00
56edbfc4f9
define the common structure used to attach 'com' units as slaves to
...
multiport cards. prototype comprobe1(), which is used by multiport card
drivers.
1996-03-09 01:01:33 +00:00
645d83b763
minor cleanup. mostly: use COM_NPORTS and a new (driver-specific) NSLAVES
...
macro where appropriate. No point in hard-coding numbers in multiple places.
At the very least, this makes the drivers slightly easier to diff/understand.
1996-03-09 00:09:04 +00:00
2c11ad408c
convert to use I/O mapping/access macros in <machine/bus.h>.
...
Mostly mechanical changes, except for probe/attach, which have
to map (and, in the case of probe, unmap) the I/O space that the
chip will use.
1996-03-08 22:17:58 +00:00
fe4037750a
convert to use I/O mapping/access macros in <machine/bus.h>.
...
Mostly mechanical changes, except for probe/attach, which have
to map (and, in the case of probe, unmap) the I/O space that the board
will use.
1996-03-08 22:03:26 +00:00
5e7aedd067
remember the bus_chipset_tag_t given by our parent, and pass it on to
...
children. use I/O space access routines defined in <machine/bus.h>
when examining I/O space for slot ID information.
1996-03-08 20:39:32 +00:00
b1d3f7607c
remember the bus_chipset_tag_t given by our parent, and pass it on to
...
children.
1996-03-08 20:36:21 +00:00
a38dcb7018
remember the bus_chipset_tag_t given by our parent, and pass it on to
...
children.
1996-03-08 20:34:25 +00:00
5087096150
pass a bus_chipset_tag_t (defined in <machine/bus.h>) to the bus when
...
attaching, and to the devices when attaching them. #include <machine/bus.h>
to make this backward compatible with old #include requirements.
Also, clean up idempotency so that isa/eisa/pci "var.h" headers are
consistent (make them all idempotent).
1996-03-08 20:25:22 +00:00
6e51b1e47e
Support for VAX 8600/8650 added. Works with lots of Unibus adapters,
...
and will probably work with Massbus adapters as well. (Not tested,
but it's the same code as for 11/780). Ubareset's may cause crashes
on 8600 also like 11/780, but they are more uncommon. No support
for console RL02 yet, but it's likely to come.
1996-03-07 23:22:34 +00:00
d318abdbc4
prototypes for ccd audio and ncr5380
1996-03-07 15:00:07 +00:00
6da2ce259c
Allow for a machine dependent match function - rd_match_hook()
1996-03-07 10:25:28 +00:00
1b4f4ed21d
regen
1996-03-05 23:16:20 +00:00
c5830eb792
add a bunch of device IDs & driver names & descriptions, thanks to
...
Jonathan Stone.
1996-03-05 23:15:59 +00:00
d43ef3b959
split device info into driver name and human readable description.
1996-03-05 23:15:05 +00:00
8f4177ba60
Add another broken drive that doesn't deal with LUNs properly to The List.
...
Fixes PR 1961, from Kevin P. Neal.
1996-03-05 01:45:42 +00:00
a8573feb51
Normalize SCSI autoconfiguration output.
...
From Chris Demetriou <cgd@NetBSD.ORG>. Fixes PR #1958 .
1996-03-05 00:15:09 +00:00
c8487c701e
reorganize mapping register definitions
1996-03-04 19:30:50 +00:00
272d9f69d2
fix aux argument to config_found() for secondary bus.
1996-03-04 17:02:46 +00:00
acabb62791
the i386 port no longer attaches isa, eisa, and pci at root.
1996-03-04 03:29:12 +00:00
827892239a
Add support for DW780. Note that ubareset's don't work properly.
...
This is not a problem on other Unibus adapters, but DW780's do
ubareset's more often. This needs to be fixed by someone someday.
1996-03-02 14:09:57 +00:00
7c61fe7779
change printing of unknown device names when not (BUS)VERBOSE slightly
1996-03-02 02:44:25 +00:00
0d2cc07e1c
remove some colons to be slightly more friendly to things trying to
...
parse autoconfiguration output.
1996-03-02 02:28:48 +00:00
91f3357fe9
clean up some diagnostic printfs
1996-03-02 02:25:40 +00:00
a4d39f5063
fix uninitialized variable; it shouldn't have been a variable at all.
...
(when probing to see if a device is there, always probe function 0.)
1996-03-02 02:03:55 +00:00
25d3eceab3
regen for changed tcdevs
1996-03-02 01:21:20 +00:00
305d9a88f6
typo in KZTSA-AA
1996-03-02 01:20:58 +00:00
9f36679a47
generated files
1996-03-02 01:17:58 +00:00
c1c41f6bfc
add ability to define TCVERBOSE, and get "human names" about "known"
...
but unconfigured (or unsupported) devices printed at boot time.
The device list is woefully incomplete, because i didn't put much time
in it, and because i don't know good "human names" for many TC devices.
1996-03-02 01:16:47 +00:00
f33acccd57
if not EISAVERBOSE, don't say that vendor/product is "unknown," just say
...
what it is.
1996-03-02 01:09:37 +00:00
8806ff8c86
oops; spaces -> tabs
1996-03-02 01:09:13 +00:00
c7241fb1ce
if not PCIVERBOSE, don't say that vendor/product is "unknown," just say
...
what it is.
1996-03-02 01:07:47 +00:00
97fbc0015b
Add bit definition for auto-initialize mode.
1996-03-01 22:27:09 +00:00
d8026ad9ef
Oops; switched two bits.
1996-03-01 04:35:27 +00:00
f3b29ca5d2
Remove two unneeded `if's.
1996-03-01 04:13:25 +00:00
546ad9e88b
Add support to the ISA DMA framework for auto-initialize mode.
...
Add experimental SB16 code, disabled for now.
1996-03-01 04:08:13 +00:00
950eda2d54
Replace DEBUG with NCR5380_DEBUG and do not define it by default.
1996-03-01 01:42:04 +00:00
6957383c25
Remove obsolete comment.
1996-02-29 19:37:53 +00:00
99e8401680
Add support for CapsLock and NumLock toggles.
1996-02-29 19:32:14 +00:00
b213396977
fix arguments to ahbmatch to properly reflect reality. provide prototyped
...
declarations for ahbmatch and ahbattach.
1996-02-28 20:29:48 +00:00
2e86958f9b
make PCI bus match/attach and sub-device attachment machine-independent,
...
add definition of 'ppb' (PCI-PCI bridge) device.
1996-02-28 01:47:06 +00:00
47e551efff
Preliminary support for PCI-PCI bridges. Recognize a PCI-PCI bridge
...
and attach the secondary pci bus as a 'pci' device. Note that this support
is incomplete and will not yet work for ports other than that i386. (The
i386 can rely on the PCI interrupt 'line' information to determine
interrupt mapping, which is not necessarily possible on other systems.)
1996-02-28 01:46:32 +00:00
f1f9317dfb
make PCI bus match/attach and sub-device attachment machine-independent.
1996-02-28 01:44:41 +00:00
92d99153a3
Kill two mis-matched and unnecessary declarations.
1996-02-28 01:44:17 +00:00
3ca5707161
make ISA bus match/attach, and sub-device configuration machine-independent.
1996-02-28 01:43:45 +00:00
ee8a2c002f
Copyright assigned to The NetBSD Foundation.
1996-02-28 01:01:17 +00:00
311a14c618
add a comment (XXX) about eisa's attachment.
1996-02-27 22:39:28 +00:00
8bd51c47b9
Copyright assigned to the NetBSD Foundation
1996-02-27 22:28:09 +00:00
4e07b4b16f
eisabus attribute moved to conf/files
1996-02-27 22:00:25 +00:00
cb8f484a57
tcbus attribute moved to conf/files
1996-02-27 22:00:04 +00:00
a21351b381
use config_found_sm(), rather than config_search+config_attach()+glue, to
...
attach subdevices.
1996-02-27 21:48:52 +00:00
3f2d99e7a2
fix first args in tcprint() invocations. Fix for this (and several previous
...
commits) from Jonathan. This is why one (I) shouldn't commit code w/o
having any sane way to test it.
1996-02-27 07:07:26 +00:00
8c79f5dd54
one more minor oops; print our name, not parent's, when doing unconfigured dev
1996-02-27 03:22:44 +00:00
09c7841a66
fix bug in previous commits. also, do submatch checking for all devices,
...
not just option slot devices.
1996-02-27 03:19:43 +00:00
ecc22fbecd
use #defines for bus speed constants, print speed on attach
1996-02-27 01:37:32 +00:00
3c43b4317d
alphabetize device list
1996-02-27 01:31:33 +00:00
7f4f1d2406
be consistent when talking about eisa_attach_args
1996-02-27 00:31:30 +00:00
4bd7608739
Better EISA autoconfiguration, per PR 1959.
1996-02-27 00:20:54 +00:00
897baa5642
machine-generated files
1996-02-26 23:47:18 +00:00
9b53b5770d
list of all EISA devices that we know about (for smarter 'unconfigured'
...
printing if 'options EISAVERBOSE'), and files to turn the list into c source.
From my PR (1959).
1996-02-26 23:46:17 +00:00
c0251e2a9d
(1) rename some structures & structure members, for consistency with
...
planned changes in other sections of code.
(2) expands the use of config_found() in tcattach() in-line, so that
tcsubmatch can be invoked there, rather than being invoked by
individual drivers.
(3) tcbus_attach_args now includes a turbochannel speed flag.
(4) compare a string in tcbus_attach_args against tc bus driver name,
to better allow attachment of multiple busses to the same parent.
1996-02-26 23:38:38 +00:00
4005c5fd09
Fix typo (PR 2123, from Michael VanLoon)
1996-02-26 22:48:32 +00:00
5a1e1bb682
don't need isa/isareg.h or pci/pci{reg,var}.h.
1996-02-25 22:56:30 +00:00
3d182fe265
Use CPU-type macros
1996-02-25 21:53:49 +00:00
6be793f659
use mono_time, rather than time, to keep track of timeouts. time can change
...
unpredictably.
1996-02-24 21:09:38 +00:00
40d57df71a
Switch byte order of ID and configuration registers for 14f and 34f.
1996-02-24 05:27:49 +00:00
ad355be572
Add a SDEV_AUTOSAVE quirk for the DEC RZ55.
1996-02-22 23:37:27 +00:00
3ec5928403
Keep the terminal count information around, as it's self-clearing.
1996-02-22 06:21:48 +00:00
012b23ca17
fix a trace message
1996-02-22 04:06:03 +00:00
a19a024e59
Do not mark target/LUN busy until we commit to working with it,
...
after the check for reselections. (From Matthias Pfaller, PR 2105)
Also improve the selection code WRT concurrent reselection.
1996-02-22 03:10:47 +00:00
a35f0ac985
Add more debugging code.
1996-02-20 12:13:09 +00:00
947cae817e
Do not allow the gain to be changed on an original SoundBlaster.
1996-02-20 11:48:50 +00:00
d1b5c90fd6
Check for errors while changing gain.
1996-02-20 11:47:22 +00:00
015ee926f6
Fix mono volume adjustment.
1996-02-20 11:15:15 +00:00
5f732f379e
Trivial (and probably not very good) implementation of SIGIO.
1996-02-20 10:00:31 +00:00
b5f3c5cbdc
XXX This is a kluge.
...
Check to see if the DMA transfer is finished; if not, don't do interrupt
processing.
1996-02-20 04:19:24 +00:00
4d6412e7bf
Move the terminal count check into a separate function.
1996-02-20 04:17:05 +00:00
cd5249589d
if_ep.c: Recognize 3c595
1996-02-19 20:18:40 +00:00
c456eaedc6
pcidevs was changed.
1996-02-19 20:09:24 +00:00
b6e5342075
Add 3c595 id
1996-02-19 20:08:25 +00:00
5021ab87f1
Update copyright notice.
1996-02-19 15:23:25 +00:00
5bc567b0d3
Set IER_ETXRDY before outputting any bytes, to prevent race condition.
1996-02-19 15:09:25 +00:00
c011a5eae4
Handle break more correctly.
...
Make IER_ETXRDY track TS_BUSY. (Prevents a loop in comintr() if no output
is available.)
Add a bunch of debugging code.
1996-02-19 14:53:03 +00:00
b9de283ae6
Fix typo; pointed out by jtk.
1996-02-19 10:30:09 +00:00
ce56580f30
Attach should get unit from _dev.dv_unit not sc_unit
1996-02-19 04:36:13 +00:00
e9d6e59c62
Fix two bugs found by Bill Studenmund:
...
Driver can not use tp->t_sc for its own purposes
Attach should take the unit number from _dev.dv_unit
1996-02-19 04:34:01 +00:00
91e913b297
Handle EOF a little differently.
1996-02-19 00:06:07 +00:00
c5326f656e
Change variable name to avoid GCC warning.
1996-02-18 23:21:48 +00:00
760b34026c
Declare a variable...
1996-02-18 22:19:44 +00:00
ba2ac1b587
Clean this up a bit.
1996-02-18 22:17:37 +00:00
2dfda50bb9
Minor tweak; make sure window size is 0 on close.
1996-02-18 20:44:40 +00:00
8f0f40e8b3
Missed some prototyping foo.
1996-02-18 20:41:18 +00:00
342c383728
Truncate to the window size in ssminphys(), not ssread().
1996-02-18 20:38:44 +00:00
294879d4ee
Add SCSI scanner support by Kenneth Stailey and Joachim Koenig-Baltes,
...
hacked a bit. Needs more work.
1996-02-18 20:32:40 +00:00
23726708b0
Minor change.
1996-02-18 20:30:53 +00:00
47286969ae
Add bass/treble input filter adjustment controls to SB (Pro) driver
1996-02-18 16:36:44 +00:00
e5730c4a73
Fix a race condition where we might stop outputting if a write follows a
...
flush too closely.
1996-02-18 09:10:15 +00:00
45eee6c55b
remove #ifdef notdef made unnecessary by previous changes (PR#1597)
...
put in missing "if (error)" that caused tape IO to always fail.
(closes PR#2086)
1996-02-17 16:00:22 +00:00
203f5d5329
Add some text describing the UART lossage worked around in the previous.
1996-02-17 04:51:41 +00:00
03f1e1432a
fix compile error from gusprobe() cleanup
1996-02-17 04:49:50 +00:00
121f6570d7
Drain the transmitter FIFO before changing the baud rate or FIFO depth
...
registers. Fixes PR 2046.
Also, if COMCONSOLE is defined, expect CONSPEED to be the baud rate.
1996-02-17 04:04:28 +00:00
28feffd508
avoid panic'ing when driver gets confused--just spit out a message and
...
keep going.
Improve error messages to include device name.
use STATIC for function declarations/definitions so it's easier to get a
useful symbol table by flipping a switch.
1996-02-17 03:35:22 +00:00
4f3fc10939
Fix PR#2060 (add AUDIO_PERROR ioctl to query # of playback drops), also
...
fix semantics of AUDIO_WERROR (now returns a count).
Also repair audio driver back to "real-time mode" where user must
provide data quickly enough for real time audio or silence is played
until user catches up. Add optional "play all" mode (additional bit in
mode field) to play all samples provided, with silence when needed to
avoid buffer underrun.
1996-02-17 02:28:56 +00:00
7847c9efee
Various:
...
* Snap the sample rate when setting it, and remember only the time constant.
* Set the time constant when changing between play/record.
* Always return the actual sample rate with AUDIO_GETINFO.
1996-02-16 10:10:21 +00:00
19f59bf3c2
Prototype the probe and attach functions.
1996-02-16 08:18:32 +00:00
9cbadb3ec2
Remove incorrect comment. From Mike Long, PR 1277.
1996-02-16 08:12:33 +00:00
7af4edd731
Various, including:
...
* Add more delays while writing registers.
* Replace sc_dma{in,out}_inprogress with sc_dmadir.
* Eliminate the need for sc_locked.
* Add more DPRINTF()s.
1996-02-16 08:07:40 +00:00
8ba7909bb4
Eliminate sc_silence, and handle output interrupts somewhat differently.
...
From John Kohl, slightly edited.
1996-02-16 02:25:43 +00:00
0bc63f486d
scsi prototypes
1996-02-14 21:46:52 +00:00
91bd533c48
Avoid deref'ing a bad pointer in ccdopen(). This could happen if
...
any partition other than RAW_PART is opened before configuring the
ccd. Bug pointed out by Matthew Green.
1996-02-11 18:04:01 +00:00
29719357a6
Remove csralloc(), not usable anymore.
...
Add ubasetvec() to steal interrupt vectors for device drivers that
need more than one vector. Add prototype for it.
1996-02-11 13:24:50 +00:00
fb81581990
detatch this spelling mistake from this source file.
1996-02-10 22:27:22 +00:00
ee08b72ef4
Hayes ESP register definition
1996-02-10 20:23:40 +00:00
11d31f7ce7
Hayes ESP patches [from PR database]
1996-02-10 20:23:18 +00:00
30c34c327f
vnd.c: Typo (disk_deta{t,}ch) It was detach in the header file and
...
detatch everywhere else. Reverted to the english spelling.
Also fixed the rest of the prototype warnings while I was at it.
ic/ncr5380sbc.c: Don't declare Debugger()... I have to clean this
everywhere :-(
1996-02-10 00:11:44 +00:00
28bf676a23
Read the 14f/34f registers in 8-bit mode.
1996-02-09 17:38:09 +00:00
f18f32d2e1
PR#2048. Prototype st_erase().
1996-02-09 14:51:34 +00:00
47246947c7
Adjust the low and high watermarks. Based on a suggestion from Lennart
...
Augustsson.
1996-02-08 03:05:34 +00:00
b686e830b8
Fix typo, from Thorsten Frueauf <frueauf@ira.uka.de>.
1996-02-06 18:15:19 +00:00
54c51d4393
Document this file better, mostly from John Vinopal
...
<banshee@gabriella.resort.com>. Closes PR #1864 .
1996-02-05 23:01:50 +00:00
ae06fdb589
Allow blocksize of NBPG/2 to NBPG for higher sampling rates. From
...
Lennart Augustsson <augustss@cs.chalmers.se>, closes PR 2013.
1996-02-05 21:32:26 +00:00
186d69c204
Don't adjust the number of blocks in the ring buffer if the driver
...
is currently outputting silence. Fix from Lennart Augustsson
<augustss@cs.chalmers.se>, closes PR #2010 .
1996-02-05 21:11:10 +00:00
3ae2aedf4d
Fix error in copyright notice
1996-02-05 02:18:48 +00:00
240e22087c
Received copyright assignment
1996-02-05 00:10:32 +00:00
d4f46b2259
cnputc returns void
1996-02-04 02:04:08 +00:00
cfefb732a0
Fix type errors.
1996-02-02 22:57:43 +00:00
0103e26fd8
Fix #includes.
1996-02-02 18:59:16 +00:00
9d9a70a5a2
Fix #includes.
1996-02-02 18:05:36 +00:00
8b3d92f17f
Resolve pmax and alpha IOCTL asic driver differences, pass 1:
...
Rename the ioctl asic register and slot macros from ASIC_<xxx> to
IOASIC_<xxx>, to be compatible with the machine-indpendent names in
sys/dev/tc/ioasicvar.h. The pmax code still uses
sys/arch/pmax/pmax/asic.h, as some of the registers and offsets
defined there are not yet defined in sys/dev/tc/ioasicvar.h.
Rename the ioctl asic base-address pointer from `asic_base' to `ioasic_base'.
Use the device address in the attach_args structure, instead of
using the deprecated BUS_CVTADDR macro.
Change the Mach derived asc driver to use "SCSI_PHASE_xxx" instead of
"ASC_PHASE_xxx", as the latest version of the Mach driver does.
1996-02-02 02:33:34 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
732dd94a83
Add experimental data mirroring support, derived from code written by
...
Satoshi Asami and Nisha Talagala. For details on using data mirroring,
see the ccd(4) manual page.
1996-02-01 20:47:13 +00:00
c72cd6e76c
Set sc->sc_cookie appropriately for the ioasic and TC option cases.
...
Tested on Decstation: ioasic, kn02 baseboard, and TC option card.
Add untested for pmax 3100/5100 baseboard ethernet.
1996-02-01 06:12:16 +00:00
e5ece749b2
Handle COMMAND ABORTED by forcing a retry. PR#2003, but with some more
...
diagnostic info.
1996-01-31 15:16:06 +00:00
40628fb3e8
update for new version of 'pcidevs'
1996-01-31 00:45:25 +00:00
8a3babe178
update/clean entries for Adaptec PCI scsi chips/boards.
1996-01-31 00:43:02 +00:00
f2e57c6dc8
Eliminate remaining direct references to the z8530 chip
...
to allow the MD access functions to do delays, etc.
1996-01-30 22:34:52 +00:00
919f6728ab
Accept DIOCEJECT as a synonym for CDIOCEJECT. Implement DIOCLOCK
...
separately from CDIOCALLOW and CDIOCPREVENT, even though they perform
basically the same function (with a different interface XXX).
1996-01-30 18:28:02 +00:00
c7a20f0ee3
Implement DIOCLOCK and DIOCEJECT. DIOCEJECT is limited to removable
...
media. Fixes PR #1975 .
1996-01-30 18:24:47 +00:00
c2c1c1b11a
Move struct definitions to MD code.
1996-01-24 19:21:40 +00:00
a3c19fb08a
Oops, I didn't mean to check in that file.
1996-01-24 16:03:31 +00:00
c68a32fc95
New "child" drivers for Sun keyboard and mouse attached to z8530sc.
1996-01-24 01:15:34 +00:00
ca633a9f35
Reorganized, machine-independent z8530 driver, based on the sparc/sun3 zs.
...
Uses autoconfig to attach keyboard, mouse, or tty. (See z8530.doc)
1996-01-24 01:07:21 +00:00
5886eb474f
Use the function pointers sc_pio_in, sc_pio_out to call the PIO functions
...
for transfers in data phase so those functions may be MD implementations
that do "pseudo-DMA" if desired. Also correct some comments.
1996-01-23 19:47:00 +00:00
0d743e5a05
update PCIVERBOSE code in various ways:
...
(1) remove the 'UNSUPP' keyword from the device list,
because it can't be reasonably used (becuase different
devices may be supported on different machines, for
good reason).
(2) enhance pci_devinfo so that class/subclass information
is optional (so pci_devinfo can be used by drivers that
match classes of devices, and want to look up the
devices' names easily).
(3) more known vendors and devices.
1996-01-22 21:08:09 +00:00
02317d25bb
Make the panic message for ISA clone devices more informative.
1996-01-16 07:52:38 +00:00
d3427703db
Hayes ESP support from Michael Van Loon, with minor cleanups. Tested on
...
a single port ESP card; works great!
1996-01-14 23:44:34 +00:00
f08d96426e
Oops. Fix RCS id.
1996-01-13 02:06:30 +00:00
e422ebca1a
Add the "ahe" driver, autoconfiguration support for the aic7xxx-based
...
Adaptec 2[78]4x SCSI controllers, from Michael Graff <explorer@flame.org>.
Fixes PR #1594 from Noriyuki Soda <soda@sra.co.jp> in a different way.
1996-01-13 02:05:14 +00:00
8068d9eeb2
Handle cases like the following:
...
- controller calls scsi_done() with error XS_TIMEOUT
- scsi_done() calls sddone()
- sddone() calls disk_unbusy()
- scsi_done() calls controller to retry command (missing the
call to disk_busy())
- controller calls scsi_done()
- scsi_done() calls sddone()
- sddone() calls disk_busy(), which panics because of the imbalance.
Bug noticed by Leo Weppleman, who also suggested this fix; pass an additional
boolean argument ("complete") to the device's "done" routine, with a
value of `0' passed from the previous call to "done", and add an additional
call to "done" when the xfer resources are freed.
1996-01-12 22:43:26 +00:00
59dd89e3b1
LUN deficient device: Tandberg 3600 (Ken Raeburn; PR#1933).
1996-01-12 11:32:37 +00:00
48bb61e0d7
Use WTDBPRINT() instead of DEBUG() for driver debugging printf()s..
...
Fixes PR #1927 , from Erik Bertelsen <erik@arhpc214.uni-c.dk>
1996-01-12 00:54:23 +00:00
5b51ec5cc8
Honor cache request and implement erase command, and add the SCSI tape
...
device configuration page. Fixes PRs 807, 1201, and 1705.
From John Kohl <jtk@kolvir.blrc.ma.us>.
1996-01-11 03:36:34 +00:00
5e81dcd27a
Make it a tad more obvious that this is a 3c505 driver.
1996-01-10 18:21:52 +00:00
75caa8c729
Imported from OpenBSD/FreeBSD:
...
Add support for the SMC8416 (EtherEZ) ISA ethernet card.
The 8416 has an 8K shared mem (the old driver assumed 16K
and failed at attach time).
1996-01-10 16:49:22 +00:00
3441f118d5
Make sure we disk_busy() for every transfer we start.
1996-01-08 21:21:56 +00:00
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
0b6a86dfe5
Make the block size always a whole number of samples.
1996-01-07 06:21:02 +00:00
0548b8e5ad
SCSI sense `info' field is a signed value (from John Kohl; PR#1597).
1996-01-05 16:03:35 +00:00
de0584fa25
Avoid zero blocksize (from David Huang; PR#1770).
1996-01-05 13:16:30 +00:00
3b6b27f9d5
Commit trivial changes from Mach MK84 to force sup'ables source to be updated:
...
Drop spurious interrupts in asc_intr(). Read back the pending SCSI command
so asc_intr() can add it to the asc SCSI log.
1996-01-04 17:43:23 +00:00
efb493a4e0
Back out the rint/tint hook stuff, and remove need to LEINTR_UNIT. The
...
hp300 was the last to use it.
1996-01-02 21:51:56 +00:00
1bd3fee124
Switch to David Jones' new machine-independent NCR5380 driver. It's been
...
in use by the sun3 port for some time, and is now used by the sparc port.
1996-01-01 22:24:30 +00:00
19c3f6d999
Add another broken CD-ROM drive to The List (Chinon CDS-525), per PR #1686 .
...
From Kortelainen Mika <k125374@cs.tut.fi>.
1995-12-31 02:40:53 +00:00
0df0df026b
Add hooks at the top of the tint and rint functions, conditionally called
...
if the CPP symbols LE_TINT_HOOK and LE_RINT_HOOK are defined, respectively.
The hooks are called by jumping though the sc_tint_hook and sc_rint_hook
members of the softc, and take the softc as an argument. Only ports which
need these hooks need to declare them in the softc.
1995-12-30 20:59:17 +00:00
17eb6e2bc1
Move the old-style disk instrumentation "structures" to a central location
...
(sys/kern/subr_disk.c) and note that they should/will be deperecated.
1995-12-28 19:16:31 +00:00
3ee815f0ce
Squish a couple of rogue old-style RCS ids.
1995-12-28 08:58:15 +00:00
fd9084650c
make changed from pr#1824 from Ignatios Souvatzis
1995-12-27 07:51:40 +00:00
b9c37470a0
Fix Ultrastor 24f probe, per Andrew Gillham.
1995-12-26 17:16:55 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
69d57286dc
merge latest Thomas version with our minimal changes
1995-12-23 06:22:46 +00:00
f519e9db90
files file to define 'tcbus' attribute, to which 'tc's attach.
...
also defines tc device. does _not_ define le driver, because
of conflicts with other (e.g. ISA) le drivers. (Alpha kernel
configuration files include files.isa and files.tc.)
1995-12-20 00:54:18 +00:00
cf967a312f
Machine-independent TurboChannel LANCE driver. As-is, this driver
...
should work properly with:
(1) LANCE chips hanging off the system IOCTL asic,
(2) LANCE chips TurboChannel option boards.
Support for various PMAX-family baseboard options isn't yet in this
file, but should be easy to add.
1995-12-20 00:52:16 +00:00
4c042472eb
autoconfiguration information for the TurboChannels System ("IOCTL") ASIC
...
found in many DECstations and all of the TC-bus Alphas. This is
provided so that the machine-independent TC if_le driver will be able
to use it.
1995-12-20 00:50:42 +00:00
eb45b93a9a
machine-independent TurboChannel bus configuration. These files
...
deal with stuff like:
(1) configuring built-in devices,
(2) looking at TC slots configuring any devices found.
The lists of slots, slot locations, etc. and built-in devices
are provided by machine-dependent code. Interrupt handling
is also provided by machine-dependent code, but the MD code provides
hooks so that standard names for 'establish' and 'disestablish'
can be used in drivers.
This code requires <machine/tc_machdep.h>, which defines some
portability types specific to the TurboChannel bus code.
1995-12-20 00:48:32 +00:00
e7aba578d3
MicroVAX III support added.
...
Dummy match/attach routines for tmscp.
Conversion of uda.c towards new config.
1995-12-13 19:02:47 +00:00
7bb08a12f6
Make lewatchdog() take an int, not a short.
1995-12-11 19:48:53 +00:00
0d1981416d
Adapt to changed mapiodev() interface.
1995-12-11 12:43:14 +00:00
89f8e05c10
Trim NULs, in addition to spaces, in scsi_strvis().
1995-12-11 04:43:01 +00:00
d51f726204
Fix typo, and eliminate some unneeded local variables.
1995-12-11 02:30:44 +00:00
333f2e0065
Make several informational messages #ifdef LEDEBUG.
1995-12-11 02:21:56 +00:00
77fce9fe33
Change format of probe messages slightly.
...
Add work-around for LANCE rev. C bug, iff LANCE_REVC_BUG is defined.
1995-12-10 08:55:07 +00:00
7268bf552d
When unconfiguring a ccd, only free as many interleave indices as
...
were allocated, which may not be the same as the number of components
in the ccd. From Don Lewis <gdonl@gv.ssi1.com>. Fixes PR #1820 .
1995-12-08 19:13:26 +00:00
1cd2ca323b
Remove a couple of now unneeded assignments.
1995-12-07 21:54:24 +00:00
b6c6d46a82
In sdminphys(), add a comment about the semantics of the "length" field
...
in a 6-byte read/write cdb (namely, length == 0 really means 256), and
that we handle this conservatively by limiting the transfer to 255 blocks.
*sigh* One just never knows how a pre-scsi-1 device is going to behave.
1995-12-07 19:46:00 +00:00
c9895db015
In both cd.c and sd.c:
...
If the read or write request can fit into a 6-byte cdb, then
use a 6-byte cdb, otherwise use the 10-byte as before.
In sd.c:
In sdattach(), make a note if the device is "ancient" (i.e.
inqbuf.version & SID_ANSII == 0).
Implement sdminphys(): if the device is "ancient", shorten the
transfer so it will fit into a 6-byte cdb.
These changes have eliminated the rejected read/write requests on my
Sun 3/60 with 2 ESDI disks behind an Emulex MD21.
1995-12-07 19:11:32 +00:00
e159767fed
Repeating my mistakes twice... I used sc-> in the pci probe routine
...
again, and it turned NetBSD in ostype[] to N^CtBSD... Thanks Charles (again)
Also call epstop() in the attach routine to make sure that the pci card
gets reset properly.
1995-12-05 03:30:15 +00:00
2e654caa73
UBA converted to new config. (uba's now can be *'ed). Bug causing
...
DMA writes to nonexistent memory pages fixed. Code for old config
of non-mass-storage devices removed. (they now must use new config).
1995-12-01 19:22:56 +00:00
7a7ca00077
Add quirk for Exabyte 8200/rev. 263H (from Paul Goyette; PR#1797).
1995-11-30 10:12:04 +00:00
0cd793449e
merge in changes from 1.1 release branch
1995-11-30 00:56:23 +00:00
3b2862c858
Make it work on little-endian monochrome buffers; per Ted.
1995-11-29 22:12:58 +00:00
12bfe2e68e
Must change `u_long' to `u_int32_t' as Jason pointed out.
1995-11-29 22:03:53 +00:00
0f7f390b49
allow bus-specific lance drivers to use machine-independent buffer/descriptor
...
copy functions, and convert isa and pmax drivers to do so.
1995-11-25 01:23:51 +00:00
523c12167c
fix definition of nullcnpollc, and add a prototype for it.
1995-11-25 00:03:35 +00:00
540ab1b88d
since 'long's in this code are meant to be exactly 32-bits wide, use
...
'int32_t's instead, so that this code is usable on the alpha.
1995-11-24 23:50:51 +00:00
13bf4371ae
delete extra (blank) line in comment block
1995-11-24 23:45:40 +00:00
97fc3b8321
get size of softc right
1995-11-17 23:33:34 +00:00
d125a07adb
My previous changes broke the pcmcia support. For now assume that all non
...
PCI cards look identical to ISA cards.
1995-11-13 20:50:22 +00:00
7a68425190
Don't use the softc at probe time on pci devices because it has not been
...
allocated yet. Thanks Charles...
1995-11-12 20:55:26 +00:00
fbecb8d22b
Remove the gratuitous code to check for a disc at boot time.
1995-11-11 20:07:57 +00:00
e4c4e9cb07
Add support for the 3c59x (pci) cards in the 3c5x9 driver. In addition
...
add the necessary bits for the 3c589 (pcmcia) card without adding any
of the pcmcia framework.
1995-11-10 19:39:21 +00:00
ffa8bfeda1
pcidevs was changed
1995-11-10 19:36:29 +00:00
c3ae59171a
- pcidevs: add 3c590 and adaptec ultra
...
- aic7xxx.c: fix the probe routines to use pcidevs.h
1995-11-10 19:36:08 +00:00
f51faf62ac
Dynamic allocate uba_softc and interrupt vectors.
...
Allow for more that one uba.
1995-11-10 19:25:46 +00:00
d3c61be30b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 05:01:05 +00:00
38a7c4b007
Correct the format of some diagnostics.
1995-11-10 04:41:58 +00:00
d8f6a1896b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 04:30:36 +00:00
20783f6b85
Bring in several changes from the ccd:
...
* Be a bit better with prototypes
* Use struct dkdevice in vnd_softc.
* Prevent the unit from being unconfigured while open.
* Implement a simple locking mechanism and use it for sanity's
sake.
Still needs more work; needs to support disklabels and the like.
1995-11-06 20:28:09 +00:00
664cb04670
Fix a race condition where if a process is asleep waiting on an
...
exclusive lock of a ccd device while another process is unconfiguring
that same device, the first process would never awaken (unless interrupted).
1995-11-06 19:58:01 +00:00
f85819bc44
In ccdstart(), only translate the block number from partition-relative
...
to absolute if part != RAW_PART.
1995-11-03 02:35:54 +00:00
8d78a257c0
More rogues.
1995-11-01 01:15:07 +00:00
4671e1d753
Add coyright, id string; fix comments
1995-10-26 15:46:24 +00:00
c35fd76e91
Fix a comment
1995-10-26 15:38:45 +00:00
4ad1c05d71
DV_NULL should be DV_DULL.
1995-10-23 15:42:50 +00:00
bcff7be6b7
DV_DISK => DV_NULL (from Mike Long; PR#1607).
1995-10-22 20:45:07 +00:00
2f9169d20b
Correct NE7CMD_FORMAT command (from John Kohl; PR#1637).
1995-10-20 00:02:20 +00:00
cbef9e5129
Add missing spindle synch control, rotational offset, and RPM members
...
to the rigid geometry mode page. These missing members are at the
end of the page, in space wich was previously marked "reserved".
1995-10-15 23:32:02 +00:00
f096f370fb
Use SET(), CLR(), and ISSET() macros.
...
Rename CFCR to LCR, and cache its value.
Check MSR before transmitting, for better flow control.
Preserve LCR_SBREAK inside comparam().
1995-10-15 19:43:04 +00:00
444e2789c6
Add quirk entries for Wangtek SCSI tapes. Also, add entry for
...
Tandberg 3800 (fixes PR#1592 - from Jochen Pohl).
1995-10-13 20:01:03 +00:00
89d4987e5d
Fix bad pointer deref, memory leak, and geometry calculation, pointed
...
out by Jochen Pohl in PR #1588 . Change the interleave index to an
array of ints rather than an array of chars to avoid losing in the event
one has more than 127 components.
1995-10-12 21:28:32 +00:00
dbce1a97aa
Add specs for ahc driver.
1995-10-10 12:16:54 +00:00
3450507404
Make sure we only schedule one timeout to refill the mbuf queue.
1995-10-10 03:11:28 +00:00
92221a1399
Return EINVAL if something other than a whole number of blocks is requested.
1995-10-10 02:52:56 +00:00
78bd894529
add prototypes for isr stuff fixes pr# 1284 and 1569
1995-10-09 15:19:58 +00:00
3973aeb080
fix hang bug from Ignatios Souvatzis <ignatios@theory.cs.uni-bonn.de>
1995-10-09 14:05:24 +00:00
b216bead49
Add an Adaptec 2940 driver, by John Aycock and Justin Gibbs, ported to NetBSD by Stefan
...
Grefen, with several bug fixes by me.
1995-10-09 09:49:30 +00:00
a1bc374083
Batting 1.000: fix a potential panic situation in ccdioctl() that can occur
...
if ccdinit() fails.
1995-10-09 05:37:57 +00:00
ab0109ad89
Fix up a couple of comments.
1995-10-09 05:21:09 +00:00
4e3112d39b
Add the partition offset to the block number in ccdstart() as opposed
...
to ccdstrategy(), and do it in a way that doesn't corrupt the block number
for residuals. (What was I _thinking_?!)
1995-10-09 01:45:34 +00:00
b8dcfbd303
Implement a simple locking mechanism and use it, for sanity's sake.
...
In ccdopen(), don't update the disklabel if any partition is already open.
Prevents race bewteen ccdstrategy() and ccdgetdisklabel().
1995-10-09 00:46:45 +00:00
9a79c5a043
Machine-independent RAM-disk driver.
1995-10-08 23:30:57 +00:00
85285f6ead
Add a shutdown hook.
1995-10-07 09:19:13 +00:00
476de93402
Remove `rc_font_ascent' from structure.
1995-10-05 13:17:51 +00:00
d40c1f54bd
Lock the underlying vnode around VOP_BMAP() and VOP_READ(). From John Kohl.
1995-10-05 06:20:57 +00:00
6a7edf0b56
Move font defs back into machine-dependent area (per Jonathan Stone).
...
Integrate patches from der Mouse (8-bit cleanliness, FULLSCREEN option,
SMALLFONT option).
The (MD) caller of rcons_init() is now responsible for initialising `rc_font'.
1995-10-04 23:57:17 +00:00
0e646ae994
Move RCONSOLE files here and rename option to RASTERCONSOLE.
1995-10-04 23:35:31 +00:00
86939fd839
Fix typo.
1995-10-04 00:35:07 +00:00
393a69d6db
Modularize the CCB/MSCP/ACB/ECB handling a little. No functional changes.
1995-10-03 20:58:56 +00:00
0bc6ad73eb
Fix an oversight in the minphys routine.
1995-10-02 16:48:36 +00:00
b5beeaaca9
Incorporate recent changes from Wolfgang and Stefan.
1995-10-01 20:51:34 +00:00
db0107b895
Specify SCSI_DATA_OUT in sddump() (from John Kohl; PR#1482).
1995-09-30 22:57:19 +00:00
b93138b93d
Add another broken NEC CD-ROM drive to The List. Fixes PR #1451 .
1995-09-26 23:37:50 +00:00
a47ab73248
memcmp -> bcmp. Fixes PR #1518 .
1995-09-26 22:56:54 +00:00
601a054fb3
Remove a sun3-ism.
1995-09-26 21:04:27 +00:00
26419c5a8b
Don't declare Debugger(). It's handled in <sys/systm.h>
1995-09-26 19:31:15 +00:00
249cddaaa7
Don't declare Debugger(). It's handled in <sys/systm.h>.
...
#include <sys/systm.h> where necessary, as suggested by Jonathan Stone.
Fixes PR #1511 .
1995-09-26 19:26:48 +00:00
dd2f3dddef
Don't declare Debugger(). It's handled in <sys/systm.h>
1995-09-26 19:24:26 +00:00
ddbb956f35
fixes a typo, the case where iomem is specified, but iosize is not, and
...
moves a couple of ee16 specific calls into a 'if ee16' protected block.
From Andrew Gillham <gillham@Digitron.COM>
1995-09-26 13:24:48 +00:00
a8e925d362
rcons (Raster CONSole) brought over here from the sparc area.
...
sparc device dependencies have been removed, as well as all references
to `struct fbdevice's. Clients need to #include <dev/rcons/rcons.h>.
1995-09-17 19:56:30 +00:00
0fbf2ca04a
Make *print() a message if no scsibus was attached. Also, return something
...
valid.
1995-09-14 20:43:09 +00:00
abe82a6680
Etherexpress-16 driver collision by Andrew Gillham <gillham@Digitron.COM>.
1995-09-14 12:41:32 +00:00
d7b9b56e07
Rename the old pmax SCSI driver's "struct scsi_device" to
...
"struct pmax_scsi_device", to avoid name conflicts with the sys/dev/scsi
SCSI driver.
1995-09-13 19:35:53 +00:00
dec12b783d
Initialization and keymapping code for DEC LK-201 and successor keyboards,
...
abstrated out of the pmax scc and dc7085 drivers.
1995-09-11 21:23:07 +00:00
23366c17ff
Rename the old 4.4bsd/pmax old-style config "struct device" to
...
"struct pmax_device" to avoid conflict with <sys/device.h>.
Change the signature of interrupt-handlers to take a void *
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
1995-09-11 08:29:11 +00:00
7e85a5a412
Fix misplaced #ifdef.
1995-09-06 04:15:59 +00:00
589d83d6a8
Patches from Jason Thorpe to deal with 4/110 scsi (PR#1422).
...
Also repairs a problem noted by David Jones: detect scsi phase correctly.
1995-09-03 22:26:02 +00:00
0696b30519
Wrap dk stats stuff in `#ifdef WORKING_DISK_STATISTICS'. Takes care
...
of PR #1388 until such time as dk stats works on all ports. XXX !!
1995-08-29 23:13:44 +00:00
d6160bdc1b
Fix typo in comment, from Chris P. Ross.
1995-08-23 01:08:10 +00:00
97cf65df4a
Change pmax ASC driver to use dynamically-allocated softc structures.
...
Concomitant changes to code that prints driver/unit name: use dv_xname
and dv_unit, instead of doing pointer arithmetic on elements of the static
softc array.
Remove support for old config. The old-config "driver" structure
is still present, because the pmax non-MI SCSI driver needs it.
Merge some off Per Fogelstrom's changes for the Pica driver,
which uses the machine-independent SCSI code. This is #ifdef'ed
out until the DMA is fixed to work on Decstations, too.
1995-08-21 21:22:43 +00:00
a2db2c1899
Fix typo, pointed out by cross@va.pubnix.com (Chris P. Ross).
1995-08-21 18:25:52 +00:00
d9e37f2bc7
Set the scsi link before calling config_attach(), so target/lun info is
...
available to, say, dk_establish().
1995-08-21 09:30:09 +00:00
b7680d7c14
Select the right register structure for the Atari. Although it's big-endian,
...
it uses the odd bytes. Also make the registers volatile.
1995-08-20 13:24:05 +00:00
4fec83b441
Fix oversights in previous change.
...
Remove ugly casts and correct spelling.
1995-08-19 04:58:44 +00:00
b0dc5d3d7f
local adaptations, and fix a could of compilation errors
1995-08-19 04:35:18 +00:00
1c8b202de7
use I/O ports on the i386
1995-08-19 04:27:31 +00:00
01597582c1
fix botch in one of my previous imports
1995-08-19 04:15:29 +00:00
9980150670
Generic FDDI support by Matt Thomas. Support for DEC "PDQ" FDDI chipset
...
and for the PCI attachment of said chipset ("if_fpa"), also from Matt Thomas.
Arguably, pdq* doesn't belong in sys/dev/ic, but it's going to be shared by
various bus attachment devices at some point in the future, and there's no
other place that seems to fit as well.
1995-08-19 00:59:47 +00:00
8b417fd28b
add 'fpa' for Matt Thomas's driver for DEC PCI FDDI boards. alphabetize.
1995-08-19 00:44:48 +00:00
c9dbf2d1d2
clean up 7/26 de snapshot import
1995-08-17 18:04:55 +00:00
77d85de272
New version of ccd. Allows dynamic run-time configuration and
...
unconfiguration and supports disklabels.
1995-08-17 16:31:30 +00:00
a2e0a97608
check for null subclass pointer. From Todd Mummert
1995-08-16 04:54:50 +00:00
3560df43af
CHINON CDS-535 version Q117 also needs NOLUNS. Assume all 535s do.
1995-08-14 13:01:42 +00:00
19f3c3099f
Another SDEV_NOLUNS device from paul@pgoyette.bdt.com (Paul Goyette).
1995-08-13 17:48:57 +00:00
8887de9230
opri --> s
1995-08-12 22:58:01 +00:00
240560e9fd
ia_irq has not been a power of 2 for a long time...
1995-08-12 22:37:58 +00:00
8a9880e714
Fix oversight in previous.
1995-08-12 21:36:46 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
88b9b7eb4a
Update DECstation drivers to use new-style config, removing
...
old-style config support, except for SCSI disks and tapes.
1995-08-10 04:21:35 +00:00
e4413d1a10
Fix another comment.
1995-08-07 14:26:51 +00:00
f657f5bf3e
Make this interface simplex. It's more efficient, and sidesteps the
...
problem of receiving our own multicasts in promiscuous mode. Also, fix
some outdated comments.
1995-08-07 14:16:26 +00:00
92637a6d42
Add another Seagate disk to the list, and make all the disks match any
...
firmware revision.
1995-08-06 00:04:00 +00:00
6567855472
Count collisions and errors better.
1995-08-05 23:53:18 +00:00
82b6eec41c
Use an intermediate variable to shorten label initialization code.
...
Make wddump() work on more machines.
1995-08-05 23:50:23 +00:00
24a5e56396
Use an intermediate variable to shorten label initialization code.
1995-08-05 23:47:52 +00:00
1bacfdc2dd
Add preliminary support for new-style configuration: struct cfdriver,
...
and match and attach code. Still use the static softc so that drivers
work with kernels configured with either new or old config.
1995-08-04 00:26:35 +00:00
60d2d483ca
Turn off the mbi diagnostics completely.
1995-07-29 23:04:54 +00:00
a4fcbe857d
Don't loop if we're out of CCBs/SCBs/MSCPs.
1995-07-28 22:49:56 +00:00
38036ed16e
Fix an oversight in the previous.
1995-07-27 05:01:08 +00:00
e04a2a7a7f
Add needs-flags for pci_subr.c.
1995-07-27 04:43:19 +00:00
c9f7b2a185
Add PCI-specific configuration for PCnet-PCI.
1995-07-27 04:39:05 +00:00
7ba8b413d9
Disable diagnostics related to expected mbi race condition.
1995-07-27 01:00:11 +00:00
fc427776a7
Add stuff for I/O mapping.
1995-07-27 00:29:02 +00:00
e8c91e1129
Fix typos.
1995-07-25 05:11:11 +00:00
e413887539
Update to use dev/ic/am7990.c.
1995-07-24 18:04:21 +00:00
d8e7ea659c
restore a deleted semicolon
1995-07-24 09:03:00 +00:00
830a91b2e9
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:16:44 +00:00
4d0bd10d53
kill structure offest comments in non-fixed-size structures.
...
In some of our worlds, pointers just Aren't 4 bytes.
1995-07-24 07:08:14 +00:00
3301cf82fd
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 06:55:37 +00:00
a696e525b7
fix function prototypes, usages, to match what the code actually does
1995-07-24 05:54:52 +00:00
979cf41d87
merge changes from update
1995-07-24 05:26:53 +00:00
607e071f1b
Fix pasto.
1995-07-24 04:34:51 +00:00
8170afdb2d
Copy changes from ISA version.
1995-07-24 04:15:35 +00:00
bdb9d41d7e
Fix thinko in packet size diagnostic.
1995-07-24 04:12:45 +00:00
267dd7012f
merge updated version from Matt Thomas, which includes dc21041 support.
...
There are a couple of questionable changes in here, that i'm going to
hammer out of him in the next week or so...
1995-07-24 03:54:14 +00:00
2d37aba592
Add missing `break;'.
1995-07-24 02:46:47 +00:00
ff82158c19
Fix typo.
1995-07-24 02:43:11 +00:00
4f36e42ff4
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:40:38 +00:00
413a5efc0c
Pass a softc to leget(), not an ifnet.
1995-07-24 02:29:59 +00:00
33292f0f88
Fix typos.
1995-07-24 02:08:13 +00:00
7998e5ab4c
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:02:45 +00:00
b5699db68d
Rename new xmit_busy back to txb_inuse.
1995-07-23 23:42:47 +00:00
799910cb2c
Remove txb_inuse. Other stylistic changes.
1995-07-23 22:12:16 +00:00
1df91e03ca
Remove a noop clearing of IFF_OACTIVE.
1995-07-23 22:09:11 +00:00
1199b1b042
Exchange xmit_free for xmit_busy. Add BPF hook to iestart().
1995-07-23 22:02:20 +00:00
317db86dd3
Stylistic changes.
1995-07-23 21:37:51 +00:00
9b2ae2a3cd
Stylistic changes.
1995-07-23 21:26:48 +00:00
4da9a5f814
Stylistic changes.
1995-07-23 21:14:31 +00:00
644935b313
Slight rearrangement. Also, force eg_incount to 0 after a reset.
1995-07-23 20:54:23 +00:00
ecf259e342
Call epmbufempty() any time the board is stopped.
1995-07-23 20:46:49 +00:00
57528ce346
Init functions are always called at splimp().
1995-07-23 20:36:51 +00:00
6bc1cc31f8
Push the copying of the output buffer further down, with the intent of
...
eliminating it and outputting the mbufs directly. Make sure the queue drains
even if packets are not failing to transmit.
1995-07-23 20:27:48 +00:00
a8ce47fa44
Remove extra spls in el_init().
1995-07-23 20:11:55 +00:00
90da0e3a99
Kill return values in egstart().
1995-07-23 19:45:42 +00:00
3d1d0d928b
Update prototypes.
1995-07-23 17:57:39 +00:00
a16702ce45
Various:
...
* Fix ugly looping constructs.
* Add a missing splx().
* Eliminate sc_pktbuf.
1995-07-23 17:50:56 +00:00
8593f3a607
Recode elread() and elget() like other drivers.
1995-07-23 17:05:26 +00:00
a1a31f853c
Fix pasto.
1995-07-23 16:43:40 +00:00
9c26c4da18
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:42:49 +00:00
465cfd15f0
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:32:33 +00:00
693043d786
GUS audio driver from John Kohl.
1995-07-19 19:58:09 +00:00
f8b400c446
Change DEBUG-->AUDIO_DEBUG. PR# port-sparc/1241
1995-07-19 19:50:16 +00:00
0b469d4a12
add/change a few quirks:
...
(1) all Chinon CDS-431 CD-ROMs (regardless of revision)
are forced to only having LUN 0, at the suggestion
of Michael Hitch.
(2) _force_ searching of extra LUNs for the Emulex MD21/S2
ESDI bridge. It's pre-SCSI 1, but knows about LUNs.
"amazing." From Jason Thorpe.
(3) recognize an Emulex tape adapter in front of a QIC-36
tape, and have it forced to only LUN 0. This is
an odd one; vendor, name, and rev strings are all
spaces. Anything that mathes this is very likely
broken, anyway, so might as well give it a shot.
Again from Jason Thorpe.
1995-07-12 09:56:09 +00:00
d8fe81c04c
implement SDEV_FORCELUNS flag, as suggested by Jason Thorpe.
1995-07-12 09:43:29 +00:00
f60db5f02a
add a SDEV_FORCELUNS flag, as suggested by Jason Thorpe, to force
...
the SCSI code to look for LUNs on prehistoric (pre-SCSI 1) drives &
controllers, where normally it would not.
1995-07-12 09:42:00 +00:00
880567e771
fix from Onno van der Linden for large-file read timeouts on double-speed
...
drives. A different read command must be used on double-speed drives.
It boggles my mind that people could design hardware this stupid.
1995-07-10 01:27:24 +00:00
5b671ea6a8
Morningstar SnapLink -> SDEV_NOLUNS, per Peter Galbavy in pr 1192.
1995-07-09 09:44:57 +00:00
21b6db23b7
play the alphabetization game
1995-07-09 09:43:07 +00:00
5a5eb678c9
QUANTUM P105S 910-10-94x A.3 -> SDEV_NOLUNS
1995-07-09 09:30:42 +00:00
c5ad4c85f0
ncr5380 chip definitions and MI part of driver.
1995-07-08 21:30:41 +00:00
e574814605
insert missing call to splx() when {aha,bt}_send_mbo() returns null.
...
from enami@sys.ptg.sony.co.jp .
1995-07-08 00:34:16 +00:00
4b4b3ee81a
Cleanup
1995-07-07 02:19:48 +00:00
dd3d2e28ed
Setup irq correctly (PR#1179)
1995-07-07 02:15:12 +00:00
0bdd4aa7c2
add support for cs4231
1995-07-07 02:11:45 +00:00
106dafc42e
Common splaudio and ISA_IPL_AUDIO
1995-07-07 01:58:04 +00:00
0589b5a222
Make mode a flag set. Full-dpulex fixes from John Kohl.
1995-07-07 01:52:30 +00:00
9624704e02
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-05 02:32:53 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
eb99dcc09a
Fix a condition where ttywait() wouldn't be woken up. Also, short-circuit
...
the case of no pending input in compoll().
1995-07-04 06:47:18 +00:00
f4b5f723e0
Remove references to if_addrlist.
1995-07-02 00:16:00 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
28cbee6941
move to more appropriate (...reg.h) names.
1995-06-28 04:02:13 +00:00
bbe407930b
header file got renamed
1995-06-28 03:26:36 +00:00
40e29d5890
sync with my current Alpha sources
1995-06-28 02:44:51 +00:00
50937bb63a
add charles's mostly-machine-independent lance driver, which is used
...
by the Alpha port.
1995-06-28 02:24:50 +00:00
c319ff6546
these have moved to more appropriate names
1995-06-28 02:23:27 +00:00
1c5d265cad
another CD-ROM quirk, a la PR 1166
1995-06-27 20:42:45 +00:00
5ad7f31079
udpate to match ifnets new use of sys/queue.h
1995-06-27 13:13:32 +00:00
bc9de32349
make dump stubs consistent
1995-06-26 05:34:44 +00:00
2a8d6461a8
implement new-style block device dump routine if __BDEVSW_DUMP_OLD_TYPE
...
not defined, otherwise use an "not implemented" stub.
1995-06-26 05:16:55 +00:00
d093e5d8b8
make dump stubs consistent
1995-06-26 05:15:33 +00:00
7491d6cbe5
if subdevices specified with wildcarded unit number, config_attach()
...
can change the cf_unit, so save it before attach and use saved value.
1995-06-26 04:08:04 +00:00
d8264613c8
add entry for another tweaked Texel CD-ROM. from pr 1151
1995-06-24 01:22:30 +00:00
6907f7f64d
fix reference to incorrect struct (paste-o)
1995-06-21 03:56:09 +00:00
9526317aa1
vendor IDs for Acer and SIS
1995-06-20 04:50:43 +00:00
cgd