definitions.
* Include <mips/cpuregs.h> in <cpu.h> so kern_clock.c has user/kernel
status bits in scope. Still needs work; r2k/r4k previous-mode bits
are different.
* Include <mips/mips_param.h> in pica/include/param.h, for locore declarations,
and definitions of vm and other constants that should be shared across
NetBSD/mips systems to esnsure user-level binary compatibility.
* include <mips/locore.h> where callbacks into locore are made, to get
prototypes in scope. Cast calls appropriately.
* include <mips/cpuregs.h>, not the old Sprite-derived <machine/machConst.h>.
machConst.h is deprecated.
* dk_establish() must return void, not int.
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
mapping code. (instead of using a "slot" and multiplying by 4 and adding the
pin number later to get the IRQ, just use base IRQ value and add the pin
number.)
comment immediately preceding it: We have to take the most significant
"numbits" from the returned value "ph", and the rest from our addr. The
addition used previously introduced a carry which was causing great
difficulty in determining the correct PA of the framebuffer VA passed in
by the booter.
occupy a slot. This is necessary so that GRFIOCMAP can find the correct
physical address of the framebuffer. Fixes P550, some LC models, and
perhaps the PB520.
a serial console and the PRAM read/write code happens to use the ADB ROM
vectors, we will have problems because the ADB hasn't been initialized.
For now, the only class of machines that we will set these up on regardless
of whether we are on a serial console or not is the original II series (II,
IIx, and IIcx). Others can come later.
Don't manipulate the memlist passed from the kickstart rom + bootloader, as
we want it unchanged in case we boot via /dev/reload.
Instead, make z2mem_start known to pmap.c; and use int in pmap_bootstrap to
detect the right segment to correct and the amount.
XXX The transformation of z2mem from physical to virtual kernel addresses
in amiga_init.c must not be done before the pmap_bootstrap() call now!
message-in. The remaining transfer count restored when a device is
reselected needs to be saved. The saved value is needed to compute
the number of bytes transferred if another disconnect occurs. This
fixes a random read data corruption that occurs on certain disks that
may disconnect more than once in the middle of a DMA transfer.
If z2 memory is used for bounce buffers, it used to be stolen in
amiga_init.c, but would not be removed from the memory list there, but
in pmap.c the memory list would just be corrected.
a) the sizes subtracted got out of sync.
b) the memory segment to subtract from was guessed in pmap_init, and not
necessarily right. (e.g. consider a graphics board whose fraem buffer gets
mapped in by the RO at 0x200000, and a memory board which maps at 0x400000)
The new code subtracts the stolen aount of memory from the memlist parameter
given to the kernel by the loader, and pmap_init just doesn't see it anymore.
- due to a merge error, 2 line were missing making all the kernel data area
cache inhibited.
- due to a misunderstanding of "kstsize" units, all but the first page of
the kernel segment table was copyback cached on the '040/'060 which
should have caused sporadic user process segmentation faults or
kernel endless loops on the '060, under heavy load (when lots of
userland pagetables are in-core), although the problem was not yet
observed.
an unrelated bug report. This will make kernel startups a bit more readable
in the presence of unsupported hardware.
Information contributed by Andreas Bussjaeger.
start adding back in tracing printfs. add support for the virtual page
table. Now it gets to user-land code, but fails because i've not
added support to the context switch code to activate and deactivate pmaps.
more naturally in terms of way the OSF/1 PALcode delivers traps and
interrupts. Clean up fault/exception handling code and system entry
points. Seperate ASTs into a seperate C function.
(2) Add unaligned access fixup code to fix unaligned quad, long,
and IEEE S and T floating datum loads and stores. VAX floating data
types not yet supported, and in the future will only be supported if
FIX_UNALIGNED_VAX_FP is defined. (No point in wasting the space when
most of the time there will never be VAX FP loads and stores.) Right
now, these features can be controlled only by sysctl. The (boolean)
integer sysctls machdep.unaligned_print, machdep.unaligned_fix, and
machdep.unaligned_sigbus control printing about unaligned accesses
(defaults on), fixing up of unaligned accesses (defaults on), and
forcing a SIGBUS on unaligned accesses (defaults off). If an access
is not fixed up (for lack of method or explicit decision), a SIGBUS is
always generated to keep programs from using bogus data. At some point,
these three choices should be controlled by per-process flags, as well.
more naturally in terms of way the OSF/1 PALcode delivers traps and
interrupts. Clean up fault/exception handling code and system entry
points. Seperate ASTs into a seperate C function.
(2) Add a boot flag ('H' and 'h') to make sure the kernel never
reboots after panic. Useful for debugging kernels which panic early
on after user processes have started, to fend off infinite reboot cycles.
Sort boot flag switch.
(3) Add unaligned access fixup code to fix unaligned quad, long,
and IEEE S and T floating datum loads and stores. VAX floating data
types not yet supported, and in the future will only be supported if
FIX_UNALIGNED_VAX_FP is defined. (No point in wasting the space when
most of the time there will never be VAX FP loads and stores.) Right
now, these features can be controlled only by sysctl. The (boolean)
integer sysctls machdep.unaligned_print, machdep.unaligned_fix, and
machdep.unaligned_sigbus control printing about unaligned accesses
(defaults on), fixing up of unaligned accesses (defaults on), and
forcing a SIGBUS on unaligned accesses (defaults off). If an access
is not fixed up (for lack of method or explicit decision), a SIGBUS is
always generated to keep programs from using bogus data. At some point,
these three choices should be controlled by per-process flags, as well.
more naturally in terms of way the OSF/1 PALcode delivers traps and
interrupts. Clean up fault/exception handling code and system entry
points. Seperate ASTs into a seperate C function.
(2) Clean up interrupt handling slightly.
(3) Add machinery to make [fs]uswintr be a bit more careful when
determining if a fault was actually their fault. (Unfortunately, they're
not actually implemented now, anyway.)
(4) Minor cleanup.
handling based on information in the 2nd Ed. of the Alpha Architecture
Reference Manual.
(2) Clean up interrupt handling slightly.
(3) Clean up badaddr().
more naturally in terms of way the OSF/1 PALcode delivers traps and
interrupts. Clean up fault/exception handling code and system entry
points. Seperate ASTs into a seperate C function.
(2) Add machinery to make [fs]uswintr be a bit more careful when
determining if a fault was actually their fault. (Unfortunately, they're
not actually implemented now, anyway.)
and IEEE S and T floating datum loads and stores. VAX floating data
types not yet supported, and in the future will only be supported if
FIX_UNALIGNED_VAX_FP is defined. (No point in wasting the space when
most of the time there will never be VAX FP loads and stores.) Right
now, these features can be controlled only by sysctl. The (boolean)
integer sysctls machdep.unaligned_print, machdep.unaligned_fix, and
machdep.unaligned_sigbus control printing about unaligned accesses
(defaults on), fixing up of unaligned accesses (defaults on), and
forcing a SIGBUS on unaligned accesses (defaults off). If an access
is not fixed up (for lack of method or explicit decision), a SIGBUS is
always generated to keep programs from using bogus data. At some point,
these three choices should be controlled by per-process flags, as well.
more naturally in terms of way the OSF/1 PALcode delivers traps and
interrupts. Clean up fault/exception handling code and system entry
points. Seperate ASTs into a seperate C function.
(2) Restructure and improve machine check and correctable error
handling based on information in the 2nd Ed. of the Alpha Architecture
Reference Manual.
(3) Removed unused (and not likely useful) PALcode assembly stubs.
more naturally in terms of way the OSF/1 PALcode delivers traps and
interrupts. Clean up fault/exception handling code and system entry
points. Seperate ASTs into a seperate C function.
- Remove the kernel-jump-to-zero code as page zero mapping is removed
- Weed out cpu040 usage, use mmutype instead
- Fix doboot code
- add fill for page zero
- use m68k/sigreturn.s
unnecessary, and given that there's no reason to waste time and
add complexity in trap handlers. This means that code which sets and
uses the USP has to be a bit more careful, but that doesn't happen much.
containing a substruct (the hardware frame) and an array of registers,
treat it like one big array of registers, for easier and prettier
access. Update everything to deal with that.
Process Control Block
Interrupt/Exception/Syscall Stack Frame
Machine Check Error Summary Register
Machine Check Logout Area
clean up some, and add prototypes for all of the CPU instruction and
PALcode function stubs.
alpha_cpu.h, and this file is no longer necessary for the
Alpha. However, some machine-independent code (e.g.
/sys/compat/common/kern_exit_43.c) still wants a file with
this name to be around.
matic media detection on Sun4m machines which support multiple media
(UTP and AUI). New function lenocarrier() switches media type when called
if no link? flags are set.
Redefine link flags for Lance ethernet (le):
<none>: switch between media as needed to find carrier (autodetect)
Preference to whatever the PROM is using (AUI if not booted
from the network)
link0: use UTP port only
link1: use AUI port only
This allows Sun4m machines with dual media Lance ethernet adapters to
boot from the network on the UTP port.
we managed to kill the following SCSI-driver bugs for the Falcon:
- The Byte_Count_zero bit of the falcon DMA controller does not always
tell the truth! This caused the SCSI-driver to choke on devices that
disconnected in the middle of a DMA-transfer (mostly removables).
- Printing debug info about the 5380 on the Falcon is *only* permitted
when DMA is not active.
- Some functions forgot to remove possibly pending sofware interrupts
- Some debug options didn't allow debugging a single target while they
could easily be made to do so. This is fixed.
from the mach3 versions only as much as necessary to allow the old
NetBSD/Alpha pmap code to compile. THESE WILL NOT WORK AS-IS, and at
minimum will require code to implement reference- and modified-bit
emulation.
All Unibus dependencies are removed.
Can support different controllers on different buses.
Allows cloning of devices.
TODO:
Write support for MSCP tapes.
old config anymore, all devices should use new config by now.
Add structures to handle DMA devices using new config.
Fixed bug that caused unwanted ubareset's on 11/780.
Use new ldda() and stda() to make MultiCache initialization work on
SuperSparc-II machines (these machines require 64-bit access, even
to a 32-bit register).
existence of the SCSI hardware in the boards adress region.
Thanks to Oster Nerhus for the detailed bug report and to Ralph Schmidt for
the recommended probing method.
- Good bye SYS_PBOOT and SYS_NBOOT, hello SYS_UBOOT (unified boot)
Currently supports booting from SCSI and HP-IB disk and network
from a single boot block. Infrastructure for booting from
HP-IB tape is there, but it doesn't quite work yet.
- Add a slightly modified version of Gordon Ross's "rawfs",
which provides a filesystem-like interface to tape devices.
Still needs debugging (see above).
- Rename sys_inst.c to inst.c, so that the LIF directory entry
turns out right (used to look like SYS_SYS_I if loaded from
tape).
- Add a "netio_ask" hint to netio.c, so that a special instnetio.o
doesn't have to be compiled for SYS_INST. Defaults to using
bootparams, but if set, will prompt user for information
usually obtained from bootparams.
- General cleanup.
in a more elegant way, but it works as is, and we need it now.
- Add a README and Makefile for the above. Note that this directory should
NOT be added to ../Makefile's SUBDIRS.
- Use an extent map to manage the ISA memory "hole", much like
how i/o port space is manged with an extent map. Do the actual
accounting in bus_mem_{,un}map().
- When creating the ioport and iomem extent maps, pass the
EX_NOBLOB flag, which tells the extent map code to disallow
fragmenting of regions. This will make it easier to catch
simple i/o and memory mapping bugs (like the if_ed.c bug I just
fixed) in the future.
- In bus_mem_map(), a chunk of code was indented using spaces.
Make the indentation use tabs.
- In bus_io_unmap(), fix the format passed to printf().
physical memory is sized by a loop that writes data to the first
word in a page, (writes something else to settle the bus) and then reads
back the word it wrote. If the read succeeds, the amount of physical
memory is increased by one page.
This fails on a 5000/1xx with a memory subsystem filled with 8 low-density
(4Mbyte) SIMMs. The memory-decoding hardware aliases the 32Mbytes of
physical memory at physical addresses 0, and at 32M (and presumably
at 64 and 96Mbytes.) The contiguous aliasing causes the memory-sizing
loop to continue at 32 MBytes, testing the memory that's really
at address 0, overwriting and crashing the kernel.
Fixed (for 1.2) by reading the SIMM-decoder stride size from the
motherboard, and reducing the loop bound to 32Mbytes on a 5000/1xx
with low-density SIMMs. (Other models have a non-power-of-2 maximum
memory and so are not subject to _contigous_ aliasing of physical memory).
The physical memory-sizer claims to preserve memory contents
(specifically the contents of msgbuf). The loop writes different
values into two adjacent locations and reads the contents of the
first, to ensure that whatever is read back from the first location is
from memory and isn't just the first write persisting on the bus.
The loop preserved the value of the first location, but not the second,
resulting in the second test value ('ZZZZ') over-writing a word in msgbuf.
- A fixed extent map (statically allocated descriptor storage) is
created in init386(), just before the call to consinit(). The
fixed descriptor storage has enough room for 8 region entires,
which is plenty for early initialization, but doesn't chew up
that much memory.
This extent map (ioport_ex) manages the i386 i/o port
space (0x0 - 0xffff).
- Just before the call to configure() in cpu_startup(), a
flag is set which notifies the bus_io functions that it is
safe to use malloc() to allocate descriptor storage, in the
event that more than 8 regions are needed.
- bus_io_map() attempts to allocate the specified region from
ioport_ex. If the allocation succeeds, the io handle is
filled in. If the allocation fails, it is implied that
something else is already using that io space, and an
error condition is returned.
- bus_io_unmap() frees a region previously allocated from
ioport_ex in bus_io_map(). If the free fails, a warning
is printed on the conole.
These changes implement "port accounting". This is required for
proper autoconfiguration on the i386 port, and makes dealing with,
among other things, PCMCIA io mappings _much_ easier.
piece of hardware into kernel virtual memory (was only a guess 'til now).
XXX Unfortunately, the hardware vendor reserves the right to change this in
future DraCo revisions. We must rethink delay() and DELAY(), at least for the
DraCo, soon.
which was taken from OpenBSD/pica.
The previous revision of elf.c replaced Ted Lemon's elf exec machinery
with something closer to Christos' MI elf machinery. It turns out
that old NetBSD/pmax elf binaries have three segments, and the newer
elf exec machinery cannot exec them.
The old elf exec machinery is folded back into cpu_exec.c, which falls
back onto using the old machinery if the new machinery fails. The
old-style binaries will be deprecated at the 1.2 release.
is close to how I reworked it, I pulled in the (essentially MI) NetBSD/alpha
and added the appropriate support around it.
- No need for the GENERIC kernel config option.
- NFS-mounted root and swap are supported.
- If we can't figure out where the root filesystem is from what the Booter
tells us, ask the user.
- Split the mainbus autoconfig code to a separate file.
Also, update/add copyrights as appropriate.
cgd