Turn on disconnect/reselect by default on targets 4-7 on the premise that
tape devices normally are set to one of these targets. Tape devices should be allowed to disconnect for the SCSI bus to operate acceptably.
This commit is contained in:
parent
e07a535f4e
commit
a0222c1293
|
@ -1,4 +1,4 @@
|
|||
# $NetBSD: GENERIC,v 1.29 1996/06/19 13:23:25 pk Exp $
|
||||
# $NetBSD: GENERIC,v 1.30 1996/06/20 19:50:41 pk Exp $
|
||||
|
||||
# Machine architecture; required by config(8)
|
||||
machine sparc
|
||||
|
@ -138,23 +138,27 @@ zs2 at obio0 addr 0xe0000000 level 12 flags 0x103 # sun4/300
|
|||
# deficiencies in the current driver:
|
||||
# bits 0-7: disable disconnect/reselect for the corresponding target
|
||||
# bits 8-15: disable synch negotiation for target [bit-8]
|
||||
# Note: targets 4-7 have disconnect/reselect enabled on the premise
|
||||
# that tape devices normally have one of these targets. Tape
|
||||
# devices should be allowed to disconnect for the SCSI bus
|
||||
# to operate acceptably.
|
||||
#
|
||||
|
||||
# sun4/300 SCSI - an NCR53c94 or equivalent behind
|
||||
# an LSI Logic DMA controller
|
||||
dma0 at obio0 addr 0xfa001000 level 4 # sun4/300
|
||||
esp0 at obio0 addr 0xfa000000 level 4 flags 0xffff #
|
||||
esp0 at obio0 addr 0xfa000000 level 4 flags 0xff0f #
|
||||
|
||||
# sun4c or sun4m SCSI - an NCR53c94 or equivalent behind
|
||||
# specialized DMA glue
|
||||
dma0 at sbus0 slot ? offset ? # on-board SCSI
|
||||
esp0 at sbus0 slot ? offset ? flags 0xffff # sun4c
|
||||
esp0 at dma0 flags 0xffff # sun4m
|
||||
esp0 at sbus0 slot ? offset ? flags 0xff0f # sun4c
|
||||
esp0 at dma0 flags 0xff0f # sun4m
|
||||
|
||||
# FSBE/S SCSI - an NCR53c94 or equivalent behind
|
||||
dma* at sbus? slot ? offset ? # SBus SCSI
|
||||
esp* at sbus? slot ? offset ? flags 0xffff # two flavours
|
||||
esp* at dma? flags 0xffff # depending on model
|
||||
esp* at sbus? slot ? offset ? flags 0xff0f # two flavours
|
||||
esp* at dma? flags 0xff0f # depending on model
|
||||
|
||||
# sun4m Ethernet - an AMD 7990 LANCE behind
|
||||
# specialized DMA glue
|
||||
|
|
|
@ -1,4 +1,4 @@
|
|||
# $NetBSD: GENERIC_SCSI3,v 1.29 1996/06/19 13:23:30 pk Exp $
|
||||
# $NetBSD: GENERIC_SCSI3,v 1.30 1996/06/20 19:50:43 pk Exp $
|
||||
|
||||
# Machine architecture; required by config(8)
|
||||
machine sparc
|
||||
|
@ -138,23 +138,27 @@ zs2 at obio0 addr 0xe0000000 level 12 flags 0x103 # sun4/300
|
|||
# deficiencies in the current driver:
|
||||
# bits 0-7: disable disconnect/reselect for the corresponding target
|
||||
# bits 8-15: disable synch negotiation for target [bit-8]
|
||||
# Note: targets 4-7 have disconnect/reselect enabled on the premise
|
||||
# that tape devices normally have one of these targets. Tape
|
||||
# devices should be allowed to disconnect for the SCSI bus
|
||||
# to operate acceptably.
|
||||
#
|
||||
|
||||
# sun4/300 SCSI - an NCR53c94 or equivalent behind
|
||||
# an LSI Logic DMA controller
|
||||
dma0 at obio0 addr 0xfa001000 level 4 # sun4/300
|
||||
esp0 at obio0 addr 0xfa000000 level 4 flags 0xffff #
|
||||
esp0 at obio0 addr 0xfa000000 level 4 flags 0xff0f #
|
||||
|
||||
# sun4c or sun4m SCSI - an NCR53c94 or equivalent behind
|
||||
# specialized DMA glue
|
||||
dma0 at sbus0 slot ? offset ? # on-board SCSI
|
||||
esp0 at sbus0 slot ? offset ? flags 0xffff # sun4c
|
||||
esp0 at dma0 flags 0xffff # sun4m
|
||||
esp0 at sbus0 slot ? offset ? flags 0xff0f # sun4c
|
||||
esp0 at dma0 flags 0xff0f # sun4m
|
||||
|
||||
# FSBE/S SCSI - an NCR53c94 or equivalent behind
|
||||
dma* at sbus? slot ? offset ? # SBus SCSI
|
||||
esp* at sbus? slot ? offset ? flags 0xffff # two flavours
|
||||
esp* at dma? flags 0xffff # depending on model
|
||||
esp* at sbus? slot ? offset ? flags 0xff0f # two flavours
|
||||
esp* at dma? flags 0xff0f # depending on model
|
||||
|
||||
# sun4m Ethernet - an AMD 7990 LANCE behind
|
||||
# specialized DMA glue
|
||||
|
|
Loading…
Reference in New Issue