f6fa8f12a6
change to use consistent APM_ constant names
1996-08-30 02:37:04 +00:00
f613796771
make all constants use APM_ prefix, and some other minor cleanup so that
...
this can be the sole APM include file
1996-08-30 02:36:00 +00:00
dbeeead15d
clean up includes and uses of constants so that we use one include file,
...
<i386/include/apmvar.h>
remove some files we don't need anymore
1996-08-30 02:32:13 +00:00
9fd32a826d
Fix name conflict with boot() prototype in <sys/reboot.h>
1996-08-30 01:34:01 +00:00
97c857ef9c
Initial commit of the prom interface code for VLSI RC7500 motherboards.
1996-08-29 22:35:41 +00:00
bda575c253
Removed stub code for copystr(), copyinstr() and copyout() now that
...
optimised assembly versions are in place.
Added support for mounting an NFS filesystem as the root filesystem even
for generic configs.
Don't hardcode the number of spl levels use the define in psl.h
1996-08-29 22:33:24 +00:00
64860a1d74
Print the instruction word for undefined instructions.
1996-08-29 22:25:26 +00:00
7568e05e32
Added machine command for reporting panic related information.
...
Trap undefined instructions that are used for breakpoints for all
processors modes. If the mode was USR32 then post a SIGTRAP signal.
1996-08-29 22:23:45 +00:00
2fb1f405f7
Added a new machine function to report information following a panic
...
e.g. panic string, message buffer etc. This is to aid debugging panics
following a panic while X was running as X will swallow all the panic
text.
1996-08-29 22:21:06 +00:00
75a39e190b
Replaced the generic copystr() and copystrinout() functions with
...
optimised copystr(), copyinstr() and copyout() functions.
This removes the need for the copy{in,out}() stub code in stub.c
1996-08-29 22:18:09 +00:00
8b3ff9c94f
Added support for NFS root and swap.
...
Define argdev here.
Fixed the interpreting of the root and swap devices passed from the
boot loader.
1996-08-29 22:08:58 +00:00
468b7ec21b
Define swapdev here as all the other ports do.
1996-08-29 22:05:50 +00:00
2c16eec75d
Removed declarations of swapdev and argdev. These are now defined
...
elsewhere.
1996-08-29 22:03:53 +00:00
686dd328c0
Faster checksumming, contributed by Zubin Dittia.
1996-08-29 20:14:49 +00:00
c4366945e5
Quiet the ahc driver down a bit by only enabling some of less useful
...
messages #if defined(DEBUG) in the NetBSD case.
1996-08-28 23:39:40 +00:00
33dec3a69a
Correct a comment.
1996-08-28 23:02:22 +00:00
1a5971cc12
Renate this file; I guess I should have taken a vote :-)
1996-08-28 23:00:46 +00:00
71ad30d0e9
(1) set scsi_link channel to either the appropriate channel (if a
...
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
1996-08-28 18:59:15 +00:00
4deb6e56b8
Kernel configuration for "NetBSD1", NetBSD.ORG's new mail server.
...
(This would be a good reference kernel for others setting up network
server systems...)
1996-08-28 07:17:58 +00:00
703e546127
Add mrg's "options COMPAT_12" back into the trunk.
1996-08-28 05:50:59 +00:00
18db5ea067
* Rename miniroot GENERIC kernel to GENERIC
...
* Add changes needed/used to build 1.2 GENERIC kernel:
* Delete obsolete and ambiguous DS5000 option.
* Add CPU_R3000 which is now required to compile in mips1 locore support.
* Add an explicit declaration of HZ.
* back out COMPAT_12 for this revision.
1996-08-28 05:49:35 +00:00
358f853f46
re-order to allow NBPG/PGSHIFT/PGOFSET to work always.
1996-08-28 03:01:27 +00:00
2a73ef60b7
change cfprint_t type definition to take a const char *, rather than
...
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
1996-08-27 21:53:46 +00:00
2c47809239
include <sys/systm.h> for printf prototype
1996-08-27 16:28:08 +00:00
73a5d45710
* Add initialization of colourmap array when using mfb as a console.
...
* Add interrupt handler for 3MIN, where we cannot disable TC slot interrupts.
* Change mfbinit() signature to match other (pmax) TC framebuffer init
routines.
* TODO after 1.2: add {cfb,mbf,sfb}var.h. Declare init functions there.
1996-08-27 02:32:48 +00:00
b8e9f36083
add COMPAT_12.
1996-08-26 23:39:36 +00:00
4daafadec3
add COMPAT_12.
1996-08-26 23:39:21 +00:00
7dff0aa247
After servicing an interrupt, check to see that there's not another
...
one pending before we clear the interrupt flag. This avoids a condition
where the line appears to go catatonic (which is particularly easily
triggered by pppd). From Bill Studenmund <wrstuden@loki.stanford.edu>.
XXX - we should probably log this if it gets excessive.
1996-08-26 14:09:19 +00:00
2d88fe9293
Old-style disk instrumentation is long gone, buster!
1996-08-26 06:47:42 +00:00
3eaf7130d9
Update for structure member name changes made in the MI code.
1996-08-26 06:39:03 +00:00
b86b695240
add Advanced Power Management driver
...
Includes bootstrap support from FreeBSD (Tatsumi HOSOKAWA and <ukai>)
1996-08-25 23:38:57 +00:00
7e7c76ba78
Correct mistakes similar to those made in cgfour.c: Log message from
...
cgfour.c:
Fix a typo and an error in color plane offset calculation. Submitted by
Konrad Schroder <perseant@hitl.washington.edu>, PR #2695 .
1996-08-25 07:47:34 +00:00
a90c2638f0
Add the United Kingdom and Swedish HIL keyboard maps to the kernels
...
used in the binary snapshots.
1996-08-25 01:22:13 +00:00
4c996d1a2a
Fix a compiler error.
1996-08-23 20:06:29 +00:00
2df99561c9
- Make the Hades a valid machine type
...
- Add some 68040 specific prototypes.
1996-08-23 11:21:01 +00:00
0f6a2c3cef
- Make all definitions relative to 'stio_addr'
...
- Add the PCI areas.
1996-08-23 11:17:00 +00:00
3a68f68754
Don't use an absolute I/O adress.
1996-08-23 11:14:59 +00:00
26039da980
Fix some compiler warnings.
1996-08-23 11:12:51 +00:00
dd183a092a
Recognize the Hades as a valid machine type.
1996-08-23 11:11:51 +00:00
d546be9627
Make the fpu config info print somewhat nicer.
1996-08-23 11:10:10 +00:00
6ab410f919
- Make it compile & work for the 68040
...
- Map the various I/O areas just below Sysmap
- Cleanup a bit
- Fix machine-type detection to recognize the Hades.
1996-08-23 11:07:56 +00:00
b9a7acad48
define a new frame buffer type code for the TGA2
1996-08-23 00:50:25 +00:00
9221f4ecc6
Add COMPAT_12 to all kernels, and COMPAT_11 to a few as well.
1996-08-22 21:02:49 +00:00
562faf95ac
Re-apply to the trunk a change that was misapplied to 1.2 release branch:
...
>apply old name change, MachEmptyWriteBuffer -> wbflush()
1996-08-22 04:37:41 +00:00
eb75b94621
Re-apply change that was misapplied to 1.2 release branch to trunk:
...
>Cosmetic changes to pass -Wall -Wstrict-prototypes -Wmissing-prototypes:
> * remove inline prototypes for keyboard redirection,
> include {dc,scc,dtop}var.h files instead.
> * add prototype for rcons_connect().
>
1996-08-22 04:29:43 +00:00
9a8c8b9858
* the 3MIN does not mask non-enabled TC interrupts, and the SFB generates
...
a vertical-blank interrupt. Add a handler to clear the interrupt, and
establish that handler if running on a 3MIN.
1996-08-22 04:17:23 +00:00
4be6fcfb6e
Only disable IRQs during cpu_switch(). FIQs can be left activeas they cannot
...
interfere with a context switch.
Fixed several comments.
1996-08-21 20:29:19 +00:00
4522daecc9
Added defines for more proc structure fields (used by the FPE).
1996-08-21 20:26:41 +00:00
7b0a0c0a24
Initial commit of the NetBSD/arm32 kernel TODO list.
1996-08-21 20:25:04 +00:00
9d18e41fd8
No longer need the relocation function arm_fpe_mod_reloc() as this is now
...
sorted out at link time.
fpe_arm_header is now the header structure for the fpe and no longer
a pointer to a header structure.
1996-08-21 20:21:05 +00:00
7b8910c01d
Vastly simplified the FPE stubs code now that there are labels for all the
...
core entry points. i.e. the linker does the work rather than the stub code.
Optimised transferring the trapframe between UND32 and SVC32 mode stacks
in the fpe_post_proc handler.
Added experimental code to handle must of userret in UND32 mode. This means
that the copy of the trapframe and the switch to SVC32 mode is only needed
if mi_switch() has to be called. (This saves a vast number of pointless
trapframe copies).
1996-08-21 20:16:30 +00:00
3142731d09
Re-written FPE core header.
...
Added branches relative to the start of the module and labels to the various
entry points.
All other offsets are now relative to _fpe_arm_start.
This removes the need for boot time relocation of the FPE.
1996-08-21 20:10:04 +00:00
e37583ac84
Removed the prototype arm_fpe_mod_reloc().
1996-08-21 20:06:26 +00:00
66d9ef4edb
Updated with more info on the ARM7500 IOC/IOMD.
1996-08-21 20:00:50 +00:00
9c8e5632da
Replaced arch/arm32/arm32/fusu.c with arch/arm32/arm32/fusu.S
...
Added new iomd device.
1996-08-21 19:56:00 +00:00
45bd77d893
Initial commit of a new iomd device. This device manages IOMD devices
...
for all ARM processors.
1996-08-21 19:53:21 +00:00
64c91a1cc3
Report EASI space timings when probing the podule bus.
1996-08-21 19:46:47 +00:00
e8f3059a07
Define EASI space cycle types.
...
Added macro for setting the EASE space cycle time for a podule.
1996-08-21 19:44:53 +00:00
e53ec9745b
Updated to work better with the new assembly functions like fuswintr().
...
Removed calls to traceback() as this info can be obtained via DDB after
a panic if needed.
1996-08-21 19:42:36 +00:00
165dc50b4c
This file can be removed now that the stubs functions it contained have
...
been replaced with proper assembly version in fusu.S
1996-08-21 19:38:39 +00:00
e75becbba3
Initial commit of proper [fs]uword() and associated functions. This
...
replaces fusu.c which comtained horrible stubs to things like copy{in,out}().
1996-08-21 19:37:43 +00:00
663aa7fac0
Removed the #if notyet guards as this code now works.
...
Optimised the imsw16() and outsw16() functions by using ldm and stm
instructions.
1996-08-21 19:19:44 +00:00
caddfcc9e1
Make sure we have at least 1 rtc device configured otherwise
...
inittodr() and resettodr() will not work.
1996-08-21 19:07:19 +00:00
88331f5ddc
Removed debugging/diagnostic tracebacks. We have DDB now so can traceback
...
from there after the panic.
Guarded several checks with #ifdef DIAGNOSTIC
1996-08-21 19:04:17 +00:00
2d7e005418
add COMPAT_12 to all configs
1996-08-21 16:25:05 +00:00
78b0ddd68b
wrap a debugging printf in NEW_PMAP
1996-08-21 15:54:18 +00:00
c8fbe2de87
PSL_IPL_HIGH -> ALPHA_PSL_IPL_HIGH
1996-08-21 15:53:26 +00:00
acebbfc2bd
Fix sfbinit() call to pass four arguments, not three, matching the
...
signature in sfb.c, which was changed to support multiple sfb devices.
1996-08-21 14:02:48 +00:00
137c61ba70
OLD_PMAP -> NEW_PMAP
1996-08-20 23:18:44 +00:00
04bac6838f
OLD_PMAP -> NEW_PMAP. also, fix bug where i wasn't disabling
...
all reporting of correctable errors on startup, but rather was
just clearing all outstanding correctable errors.
1996-08-20 23:16:27 +00:00
645fb5dd99
lots of debugging printf flags, serious clean, add pmap_{,de}activate()
1996-08-20 23:08:08 +00:00
00c4aefc1a
add a bunch of printfs for NEW_PMAP
1996-08-20 23:05:10 +00:00
a6ff68785e
add cached dirbase PFN, protos for pmap_{,de}activate()
1996-08-20 23:02:59 +00:00
0a50735abb
OLD_PMAP -> NEW_PMAP
1996-08-20 23:02:30 +00:00
8bc62db31e
K0SEG_END is inclusive
1996-08-20 23:02:17 +00:00
488b657b68
OLD_PMAP -> NEW_PMAP
1996-08-20 23:00:24 +00:00
e59fad87f5
OLD_PMAP -> NEW_PMAP
1996-08-20 22:38:26 +00:00
e4ff992e15
allow dots in names (but not at start of names), so that
...
GENERIC.PROF gets built.
1996-08-20 22:28:37 +00:00
33d6183e0f
kill OLD_PMAP, since it now takes 'NEW_PMAP' to get the new pmap code.
1996-08-20 22:25:16 +00:00
68f23ebb4d
kill 'microcode' Makefile.inc include, define CWARNFLAGS with ?=.
1996-08-20 22:23:01 +00:00
8bdeec7c79
switch 'old_pmap' option to 'new_pmap', since getting the new pmap code
...
is going to take a while...
1996-08-20 22:20:07 +00:00
1c367d4761
Modify bus code arguments. Cleanup.
1996-08-20 14:19:41 +00:00
2e489636e4
Use common routine to map in pages before DMA'ing.
1996-08-20 14:15:04 +00:00
c5db4b8756
Support for cmi bus on 11/750.
1996-08-20 14:13:50 +00:00
34d020edd2
Change uba* functions to take pointers, rather than uba unit numbers.
1996-08-20 14:07:33 +00:00
1be0c00cf0
Add another parent bus for 11/750 (cmi). remove mtc.c.
1996-08-20 14:05:16 +00:00
9f1148c9c4
Use the same device driver for both uda and mtc. Actually, the only
...
difference is vcid. The unit names must differ, so that it is possible
to distinguish them at autoconf time.
1996-08-20 13:49:15 +00:00
3a504ef134
Modified to get cleaner match/attach code for different parent buses.
...
Fix so that resource wait queueing works.
Changed all functions to take a pointer to uba_softc instead of unit
number, except for ubareset(). This must be done later.
1996-08-20 13:37:57 +00:00
b4ffdaad58
Oops, added forgotten "-". closes port-x68k/2706.
1996-08-19 17:22:14 +00:00
eb9c65ce77
add a version of GENERIC which is always compiled with
...
profiling enabled. (named the same as what GENERIC kernel
would be named if configured with config -p, which would end up
generating the same kernel as this.)
1996-08-19 04:53:24 +00:00
15f9c59baf
check in the code used to build the kernel that Andrew Gallatin used to
...
figure out the correct IRQ for the ethernet on the AlphaStation 500.
That code is enabled via KN20AA_BOGUS_IRQ_FROB (but hopefully won't be
needed any time soon, and won't link w/o slight changes to other code).
Basically, when establishing an interrupt that we don't know what to
do with, prompt the user for what interrupt line to enable. If you
get stray interrupts when you try to use the device (but not before),
then you've got the right line.
1996-08-19 04:28:25 +00:00
3c7eaa04e2
fix typo in comment
1996-08-19 04:19:01 +00:00
b4bfcf063f
21040 ethernet chip on AlphaStation 500 lives in slot 6 (a slot not
...
found on the AlphaStation 600), and interrupts on interrupt line 13.
Thanks to Andrew Gallatin for booting a test kernel 32 times (trying
each interrupt line, looking for the right one) to find this.
1996-08-19 04:14:58 +00:00
4a1279de25
Import framebuffer drivers from 4.4-Lite2 as the root for NetBSD drivers.
...
Only change from Lite (or lite2, qv.c and qd.c do not change) is adding
NetBSD RCS ids.
1996-08-18 21:28:53 +00:00
f5f1393c35
Get rid of dkn stuff. It's deprecated.
1996-08-18 17:01:53 +00:00
6aab91675e
Revert to polled-DMA on Falcon.
1996-08-16 08:25:46 +00:00
e295ad51df
clean up stray interrupt handling a bit.
1996-08-15 22:17:44 +00:00
312e49bad1
After processing an AST, check for another one. Pointed out by ws.
1996-08-15 15:34:03 +00:00
b3703a8fcd
oops; fix bogon in last.
1996-08-14 05:47:39 +00:00
1f675e847d
say 'stray kn20aa irq' rather than 'stray PCI irq'; former is more correct.
1996-08-14 05:45:52 +00:00
a96b24415d
fix inadvertent reordering of switch which cases by slot number but
...
is ordered by interrupt number.
1996-08-14 05:44:31 +00:00
f124a6aaa9
Back out previous; this is a bigger problem than I expected.
1996-08-14 00:32:53 +00:00
a05a1045f7
The htonl(), htons(), etc. functions return u_long and u_short. Add
...
casts to the big-endian versions of these calls so that the compiler
won't complain when they're passed as arguments to printf().
1996-08-14 00:07:35 +00:00
28df9248ce
Fix a typo and an error in color plane offset calculation. Submitted by
...
Konrad Schroder <perseant@hitl.washington.edu>, PR #2695 .
1996-08-13 20:52:43 +00:00
1cc7b834e4
* Add declarations for MIPS-III (r4000) locore entrypoints.
...
* Add initialization code to set MIPS-III exception vector and runtime
jump-table for locore functions.
* Clean up for -Wall, pass 1.
1996-08-13 08:19:50 +00:00
c0bae2d189
sync with sparc version:
...
repair XDC_HWAIT macro to handle the fact that waithead is now
unsigned. should fix xdc watchdog timeouts noted in port-sparc
by nathanw@mit.edu .
1996-08-12 20:28:54 +00:00
cfdb99f44c
repair XDC_HWAIT macro to handle the fact that waithead is now
...
unsigned. should fix xdc watchdog timeouts noted in port-sparc
by nathanw@mit.edu .
1996-08-12 20:19:27 +00:00
1eba3fc001
Use to build `makemodes'.
1996-08-12 00:57:35 +00:00
558d72128e
Put into . Remove hooks for `config-dependent' and
...
`device-driver' flags.
1996-08-12 00:51:24 +00:00
88578318ca
Remove the only use of `config-dependent', as it isn't actually needed.
1996-08-12 00:16:25 +00:00
99b43cc2bc
* Apply LOCORE -> _LOCORE change so locore.S doesn't #include struct
...
definitions.
* Include <mips/cpuregs.h> in <cpu.h> so kern_clock.c has user/kernel
status bits in scope. Still needs work; r2k/r4k previous-mode bits
are different.
* Include <mips/mips_param.h> in pica/include/param.h, for locore declarations,
and definitions of vm and other constants that should be shared across
NetBSD/mips systems to esnsure user-level binary compatibility.
1996-08-11 23:30:22 +00:00
14bd2765a1
Fix old lint and changes not pulled back from pmax, pass1:
...
* include <mips/locore.h> where callbacks into locore are made, to get
prototypes in scope. Cast calls appropriately.
* include <mips/cpuregs.h>, not the old Sprite-derived <machine/machConst.h>.
machConst.h is deprecated.
* dk_establish() must return void, not int.
1996-08-11 22:35:46 +00:00
e575454bf6
fixed kernel couldn't boot from most machines. more generic for x68k.
1996-08-11 15:37:42 +00:00
33f551acdb
fixed major number of vnd and cd. (PR#2635)
1996-08-11 15:34:56 +00:00
c85101f816
drive 2 (or 3) couldn't access with drive 0 (or 1). fixed this.
1996-08-11 15:32:49 +00:00
95d984309f
fixed use of uninitialized pointer.
1996-08-11 15:28:36 +00:00
2ca67bae05
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 12:27:50 +00:00
66bb4a489f
Disable the Hardwarecursor on the RetinaZ3 to solve the problems with
...
wrong mouse jumps under X11.
Remove the not working options KGDB from DRACO and GENERIC and added
an option to enable the HWC for the RetinaZ3
1996-08-11 09:48:17 +00:00
5c2e33fc0a
Put back `waittime' variable.
1996-08-10 13:47:54 +00:00
cdfce2d74f
Theres no microcode/Makefile.inc now.
1996-08-10 08:40:53 +00:00
cf67f29afe
* Add a HOSTED_C_C variable, which strips `-p', `-pg', and
...
`-nostdinc', and use it when building genassym.
* Use `-nostdinc' just to be sure we're self-contained.
1996-08-10 06:07:57 +00:00
f94052ed3a
* Define CWARNFLAGS and MKDEP in some moderately consistent fashion.
...
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
1996-08-10 05:29:24 +00:00
0f2514d2a0
Add manu/prod id for the DMI resolver board here. (No, no driver yet)
1996-08-09 18:18:05 +00:00
5abbf990f3
Change reboot(2) to take two arguments: bootopt like normal and also
...
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
1996-08-09 10:30:23 +00:00
79fb4c0c30
Add missing #include of "ppp.h" to get definition of NPPP so that the
...
pppintr() call is actually included. This fixes ppp so that it actually
works again.
1996-08-09 05:11:02 +00:00
440a942944
fix bogus returns from dec_kn20aa_intr_map(), and slightly simplify interrupt
...
mapping code. (instead of using a "slot" and multiplying by 4 and adding the
pin number later to get the IRQ, just use base IRQ value and add the pin
number.)
1996-08-07 04:33:21 +00:00
efec732f4d
fix a typo, add a function kn20aa_disable_intr() to disable a given
...
kn20aa interrupt line.
1996-08-07 04:22:40 +00:00
bfb6d245b5
Make the calculation of the PA returned by get_physical() agree with the
...
comment immediately preceding it: We have to take the most significant
"numbits" from the returned value "ph", and the rest from our addr. The
addition used previously introduced a carry which was causing great
difficulty in determining the correct PA of the framebuffer VA passed in
by the booter.
1996-08-06 04:03:33 +00:00
d2ea50dad8
Fix improperly terminated comment. Noticed by brg@dgate.org (Brian Gaeke).
1996-08-05 23:20:46 +00:00
9e413208a9
adding AHA-284x VL front-end to ahc driver by Jason Thorpe.
1996-08-05 21:15:58 +00:00
d2bb4c7a65
AHA-284x VL front-end to ahc driver by Jason Thorpe.
...
This is tested under both netbsd-1-2 branch and main trunk.
1996-08-05 21:14:29 +00:00
2985b9d676
Initialize conspa so ite_match() can attach to the proper device.
1996-08-05 04:36:45 +00:00
571519c310
Attach ite semantics to the appropriate grf device.
1996-08-05 01:52:13 +00:00
91d8e018e2
Attach ite semantics to the appropriate grf device, instead of obio.
1996-08-05 01:26:31 +00:00
1d6cd98d6a
Attach ite semantics to the appropriate grf device, instead of obio.
1996-08-05 01:00:12 +00:00
480910aa2e
Program around the Fastlane's DMA hardware shortcomings.
...
Fix by Matthias Scheler (PR #2672 ), based on information provided by Ralph
Schmidt/Reinhard Grams (Phase 5), forwarded by Jerome Lovy. Thanks to all.
1996-08-04 11:25:36 +00:00
89f4fddbfe
Add a way to tell grf_establish() that internal video doesn't actually
...
occupy a slot. This is necessary so that GRFIOCMAP can find the correct
physical address of the framebuffer. Fixes P550, some LC models, and
perhaps the PB520.
1996-08-04 06:03:47 +00:00
9931b6b324
MRG vectors for the Quadra 630, from Jason Godfrey <jason@primenet.com> and
...
Bob Nestor <rnestor@metronet.com> (verified by Jason).
1996-08-04 04:08:25 +00:00
0e57c5bb15
Be much more careful with setting up the MRG ROM vectors. If we are using
...
a serial console and the PRAM read/write code happens to use the ADB ROM
vectors, we will have problems because the ADB hasn't been initialized.
For now, the only class of machines that we will set these up on regardless
of whether we are on a serial console or not is the original II series (II,
IIx, and IIcx). Others can come later.
1996-08-04 03:53:15 +00:00
af6e1b10a8
Kludge to get back "Fusion Forty" fastkick memory.
1996-08-02 18:00:30 +00:00
fdcabd43da
Do not use any emulated insn's in boot program. (in this case cmpc3).
...
Add strncmp to get around this.
1996-08-02 16:18:39 +00:00
8311e65b64
Rewrite of the last bugfix wrt. Z2 bounce buffer memory allocation:
...
Don't manipulate the memlist passed from the kickstart rom + bootloader, as
we want it unchanged in case we boot via /dev/reload.
Instead, make z2mem_start known to pmap.c; and use int in pmap_bootstrap to
detect the right segment to correct and the amount.
XXX The transformation of z2mem from physical to virtual kernel addresses
in amiga_init.c must not be done before the pmap_bootstrap() call now!
1996-08-02 15:07:23 +00:00
7a26a7952d
Fill in `pcb_psr' in the PCB before copying it to the new child PCB.
1996-08-02 13:44:48 +00:00
5e04d04d68
Add support for booting Vaxstations; from MFM and SCSI. (PROM-based boot).
1996-08-02 11:21:41 +00:00
318585cf7f
Removal of some dead code. Moving of data definitions. (From Matthias)
1996-07-31 16:47:30 +00:00
5b0728f9a2
Correct update of DMA address register when saving DMA state on a
...
message-in. The remaining transfer count restored when a device is
reselected needs to be saved. The saved value is needed to compute
the number of bytes transferred if another disconnect occurs. This
fixes a random read data corruption that occurs on certain disks that
may disconnect more than once in the middle of a DMA transfer.
1996-07-30 06:36:33 +00:00
721e767ea2
Deal with two bugs in the bounce buffer memory reserve code:
...
If z2 memory is used for bounce buffers, it used to be stolen in
amiga_init.c, but would not be removed from the memory list there, but
in pmap.c the memory list would just be corrected.
a) the sizes subtracted got out of sync.
b) the memory segment to subtract from was guessed in pmap_init, and not
necessarily right. (e.g. consider a graphics board whose fraem buffer gets
mapped in by the RO at 0x200000, and a memory board which maps at 0x400000)
The new code subtracts the stolen aount of memory from the memlist parameter
given to the kernel by the loader, and pmap_init just doesn't see it anymore.
1996-07-29 20:53:35 +00:00
14da7556a0
Add $(DESTDIR).
1996-07-27 18:21:35 +00:00
faea95eae8
Delete the NOMAN and BINDIR lines. They're imported from ../Makefile.inc
...
anyway, and the BINDIR here was even wrong (missing $(DESTDIR)).
1996-07-27 18:15:42 +00:00
89931b5a83
Add $(DESTDIR) to the BINDIR=
1996-07-27 18:09:42 +00:00
jtk