f312ee5f9a
What do you know.. the prom_cpu{stop,idle,resume} function appear to be
...
returning a success/fail flag. For now, use it to be informative.
2003-01-16 16:10:44 +00:00
5e231ddd1c
* Implement mp_halt_cpus()
...
* xcall: use printf_nolog()
2003-01-16 14:49:08 +00:00
72286d4202
Definitions of some OBP generated CPU mailbox messages.
2003-01-16 14:43:07 +00:00
26fa27a910
Fix reboot options handling; now one-letter kernel names can also be booted.
2003-01-16 11:33:21 +00:00
a5cea9e740
On Hypersparc MP machines, we need to flush the TLB after a page cache flush.
...
While the pmap functions take care of properly ordering cache and TLB flushes,
not all TLB flush requests are sent to all CPUs (due to per CPU pmap tracking)
while cache flushes are always broadcast.
XXX: need to investigate pmap tracking for cache flush operation as well.
2003-01-15 22:56:32 +00:00
5bb3d93538
srmmu_cache_flush: switch MMU contexts in all places where it matters.
...
(incidentally, this also makes Hypersparc MP machines mostly go).
2003-01-15 16:42:27 +00:00
a458d9f040
Fix compiler warning induced by last change.
2003-01-15 06:57:12 +00:00
9eb63b3b94
statintr: if interrupting code running below IPL_SCHED, call schedintr()
...
directly, saving the overhead of an extra soft interrupt.
2003-01-14 23:00:59 +00:00
c8226e1ce0
Define spllowerschedclock().
...
To be used in the same spirit as spllowersoftclock().
2003-01-14 22:58:00 +00:00
d45f77c6c8
Add CLKF_LOPRI() macro that allows a (timer) interrupt handler to determine
...
whether it is interrupting code running at a given IPL level.
2003-01-14 22:54:53 +00:00
ee7e8274a6
xcall: raise IPL to splsched() to prevent interrupts that take schedlock.
...
Otherwise we have a locking order problem with schedlock and xmsglock.
2003-01-14 17:30:55 +00:00
18cd92ffe3
(Re)initialise the pmap structure fields that are not preserved on the
...
pmap pool cache all in one place.
2003-01-14 13:56:07 +00:00
b50058b483
Broadcast I-cache flush in the `Unimplemented Flush' trap handler.
2003-01-13 20:00:34 +00:00
b4a1c0f6a0
Reset ddb_cpuinfo when leaving DDB.
2003-01-13 19:44:53 +00:00
167ce8e6d3
Fix stack tracing once again.
...
Also check for trap frame boundaries when fetching the return address.
2003-01-13 19:44:06 +00:00
df4b5f766b
Remove UNLOCK_XPMSG() before cpu_halt(); it's not compatible with LOCKDEBUG
...
and it wan't chique in any case.
2003-01-13 16:59:17 +00:00
8d9571d120
remove cpu_hatched, cpu_hatch_sc and cpu_hatchstack. the first can use
...
the cpi->flags, the second is unused and the third is also cpi-idle_u.
2003-01-13 15:50:50 +00:00
5642428f4e
Use print_nolog() from xcall(), to avoid confounding things even further
...
by re-entering the scheduling code to wakeup syslog waiters.
2003-01-13 15:01:16 +00:00
4641d55697
Halt any other CPUs in cpu_reboot().
2003-01-13 01:35:45 +00:00
2684c88122
fpulock: encapsulate required IPL raise in the FPU LOCK/UNLOCK macros.
2003-01-12 16:29:00 +00:00
24780840a1
Account softintr_common as uvmexp.softs, not uvmexp.intrs.
2003-01-12 06:11:01 +00:00
55a3bd0a85
schedcpu() has been fixed; now we can notify another CPU about a pending
...
reschedule request.
2003-01-12 01:50:51 +00:00
c41718e9ec
Remove needless indirection from the curproc() macro.
2003-01-12 01:19:00 +00:00
ae33d2b4e5
Use per-CPU virtual addresses for pmap_copy_page() & pmap_zero_page().
2003-01-12 01:16:06 +00:00
dab556c2b1
pmap_deactivate(): arguments for sp_tlb_flush() were reversed.
2003-01-12 00:34:52 +00:00
90d9434890
keep track of which cpu's have run a pmap and only broadcast tlb flushes to
...
cpu's who have done so. implement pmap_deactivate() for MULTIPROCESSOR and
call it from cpu_switch() when we are about to switch proces and when we
enter idle().
with this change, i see significantly reduced tlb IPI traffic and fork/exec
bound processes -- such as "configure" -- run significantly faster, upto
15%. i also obvserved a small (0-2%) benefit to CPU bound tasks as well.
2003-01-11 03:40:31 +00:00
e756303d08
expand db_proc_cmd() a little more.
2003-01-10 19:25:12 +00:00
30cc38bdb5
Replace `want_resched' and `want_ast' globals by per-CPU variables.
2003-01-10 16:34:14 +00:00
b346ea724a
Merge sparc and sparc64 <machine/signal.h>.
2003-01-09 23:25:24 +00:00
70628f1993
clean up db_proc_cmd() output slightly.
2003-01-09 18:00:51 +00:00
18c8de0d93
It's now required to turn off traps in the srmmu cache flush ops in
...
non-MULTIPROCESSOR kernels too.
2003-01-09 12:29:52 +00:00
cbc8b8122d
Check for existing soft interrupts too before trying to install a fast
...
interrupt handler.
2003-01-09 10:27:24 +00:00
ec9ebd1af6
- s/xpmsg11/xpmsg15/
...
- clean up
- no need to reset the msg.tag
2003-01-09 05:55:30 +00:00
7386726570
remove a line accidentally commited in previous.
2003-01-09 05:27:09 +00:00
9b0c7030f5
call splclock() around the FPU_LOCK().
...
XXX: pk suggests we can make the this a sleeping lock.
2003-01-09 04:58:58 +00:00
f234ea91a2
Remove write_user_windows() from a number of `4m' functions, since we don't
...
switch contexts with traps enabled anymore.
2003-01-08 18:46:28 +00:00
f63279a9b6
Add CPUINFO_WANT_RESCHED and CPUINFO_WANT_AST
2003-01-08 17:49:39 +00:00
87e0907cbb
Avoid external declaration for the dummy `ross_pend' variable.
2003-01-08 17:22:09 +00:00
127392a5b7
Prepare for per-CPU reschedule and AST requests.
2003-01-08 17:19:53 +00:00
d3db019efd
Make pv_uncache() and pv_cacheflush() static functions.
...
Split pv_cacheflush() in sun4/sun4c and sun4m/sun4d versions.
2003-01-08 16:16:46 +00:00
f4018cde22
Initialise the secondary CPUs' `spc_runtime'.
2003-01-08 01:20:56 +00:00
88f08d9ac1
- add a new message tag for level15 software NMI, and switch ddb to use this
...
rather than the level13 software intr xpmsg area. now DDB IPI's don't lock
the xpmsg_lock and we avoid recursion and more.
- don't actually use cpuinfo.msg.lock yet, xpmsg_lock suffices.
- reread the pending register on mbus hypersparc cpus to avoid bugs in the
h/w that cause IPI's to be missed.
2003-01-07 16:20:13 +00:00
02d686d112
Simplify ddb register storage setup: remove MULTIPROCESSOR special cases
...
and keep the ddb register copies on the current stack always.
2003-01-07 16:03:03 +00:00
469014c2cd
* Maintain a pointer to the cpu_info structure of the CPU being examined.
...
* Force cpu_Debugger() to have a stack frame, so tracing can at least
start off matching arguments and function calls correctly.
2003-01-07 15:15:06 +00:00
004dd5ecba
#include <sys/kernel.h> for `cold'.
2003-01-07 13:12:59 +00:00
63b5299d1e
Let all CPUs play..
2003-01-07 12:09:00 +00:00
e1dfbff267
xcall: use splclock() to prevent interrupts that want the kernel lock.
2003-01-07 10:57:18 +00:00
141297688f
revert (most of) previous
2003-01-07 10:31:56 +00:00
c0338e49bf
don't do the xcall() dance on sun4d for the cache flushing, but do make
...
sure we're only doing one flush at a time...
2003-01-07 05:57:37 +00:00
1035faff1d
writable, not writeable.
2003-01-06 20:30:28 +00:00
0a66c7efe5
Protect FPU context switching with its own lock.
2003-01-06 18:32:31 +00:00
4bb41ae2f2
Rework how KERNOBJDIR functions; now it's always determined with
...
cd ${KERNSRCDIR}/${KERNARCHDIR}/compile && ${PRINTOBJDIR}
This is far simpler than the previous system, and more robust with
objdirs built via BSDOBJDIR.
The previous method of finding KERNOBJDIR when using BSDOBJDIR by
referencing _SRC_TOP_OBJ_ from another directory was extremely
fragile due to the depth first tree walk by <bsd.subdir.mk>, and
the caching of _SRC_TOP_OBJ_ (with MAKEOVERRIDES) which would be
empty on the *first* pass to create fresh objdirs.
This change requires adding sys/arch/*/compile/Makefile to create
the objdir in that directory, and descending into arch/*/compile
from arch/*/Makefile. Remove the now-unnecessary .keep_me files
whilst here.
Per lengthy discussion with Andrew Brown.
2003-01-06 17:40:18 +00:00
675149a358
- md_fpumid = -1 => md_fpu = NULL, in some #ifdef FPU_DEBUG code
...
- only call KERNEL_PROC_UNLOCK() if we called KERNEL_PROC_LOCK() originally.
2003-01-06 14:16:10 +00:00
67998a8646
Move schedintr() to clock.c and initialise schedhz in initclocks(), so
...
these are available to all timer implementations.
2003-01-06 12:50:43 +00:00
9a9c991837
Fix SP tlb_flush_{ctx,all} macros.
2003-01-06 12:10:46 +00:00
9df7616ed3
Combine the various sun4m/sun4d TLB flush routines into a hand-coded
...
assembler version.
2003-01-05 19:38:42 +00:00
c0142e4ded
Print the cpu number in many pmapdebug-controlled debug traces.
2003-01-05 19:31:12 +00:00
113229a2cb
trap(T_FPE): reset the `p_md.md_fpu' when preempting the FPU.
2003-01-05 19:26:17 +00:00
3e2e9af6c9
Grab the kernel lock on interrupts at level IPL_CLOCK and lower.
2003-01-04 19:25:36 +00:00
5e73320f0f
Re-arrange the fields in struct cpu_info such that the most heavily used ones
...
are together, to reduce cache stomping.
2003-01-04 18:54:45 +00:00
f6fc3bd5fc
new cpu_switch: SMP: even if we pick up the same process after idling, we
...
must reset its context as the process might have run on another cpu in
between and had its context changed, e.g. by exec(2).
2003-01-04 11:09:18 +00:00
277fb5e18a
remove a now bogus comment from xcall()
2003-01-03 16:27:23 +00:00
68da24bd3d
- remove some dead debug code
...
- don't cross call the smp_tlb_flush*() routines on SUN4D, just ensure
that there is only one concurrent flush happening.
2003-01-03 16:24:50 +00:00
fb1500c7e1
remove dead extern fpproc/foundfpu declarations.
2003-01-03 16:21:05 +00:00
5b23b7800a
FPU save is handled in xcall() now.
2003-01-03 16:20:21 +00:00
444faacaac
xcall(): consult the `cpuset' argument for posting the cross calls.
2003-01-03 15:49:11 +00:00
0a78c9e13a
Define a few XCALL? shorthand macros to avoid clutter.
2003-01-03 15:44:55 +00:00
ff451161e2
Finish FPU context switching on SMP systems.
2003-01-03 15:12:02 +00:00
87a073002c
Make the *_stream_* methods always use the *_real accessors.
...
Define __BUS_SPACE_HAS_STREAM_METHODS.
2003-01-03 13:23:39 +00:00
7bd617d237
part one of bus_space(9) fixes to enable bus spaces to override the
...
bus_space_{read,write}_[1248]() functions, which will allow 16-bit
PCMCIA support to work without additional hacks in MI drivers.
this option is not enabled yet.
2003-01-03 11:57:45 +00:00
947028ed94
reverse mailbox physical address check: now warn if it's not I/O space.
2003-01-03 09:22:11 +00:00
3f5be1863e
srmmu cache flush: use to the CPU context parameter; this is now required.
2003-01-03 09:19:03 +00:00
c79ff46cb6
don't try to setup MXCC registers on non-primary CPU's on systems without
...
SMP support.
2003-01-02 09:42:09 +00:00
9dd42c6155
SMP: lock kernel for soft interrupts < IPL_SCHED as well.
2003-01-01 16:17:10 +00:00
3607bd7dca
pmap_alloc_cpu: use flags from boot cpu for now, as the passed cpu_info
...
structure has not been fully setup yet.
2003-01-01 15:56:11 +00:00
16305a65cb
prom mailbox map: look for the property `mailbox-virtual' first.
2003-01-01 15:51:00 +00:00
2fff4ee989
fix a comment.
2003-01-01 08:24:48 +00:00
d06249b555
KNF.
2003-01-01 06:33:29 +00:00
9c1214153c
Use aprint_normal() for cfprint routines.
2003-01-01 02:20:47 +00:00
2aac3c7c89
Slight optimisation in proc_trampoline().
2002-12-31 17:07:36 +00:00
1df04e663f
Make the schedintr() code common for all timers.
2002-12-31 16:45:52 +00:00
7b7269ba42
New version of cpu_switch/switchexit, mostly to simplify SMP support. It's
...
currently conditional on ALT_SWITCH_CODE (defaults to `on' if MULTIPROCESSOR
is defined) until more testing rounds are completed.
2002-12-31 16:17:12 +00:00
3d8def4865
Use a soft interrupt scheme to schedule schedclock(), so we can make
...
splsched() less than splhigh().
2002-12-31 15:57:26 +00:00
67e16e38a4
Define IPL_SCHED at level 11 and make splsched() use it.
2002-12-31 15:51:18 +00:00
d358537b64
Pass the CPU context to all TLB flush routines. Because of this (and the
...
fact that cache flushes are also passed the context number), most
"long-term" context switches can be eliminated from the SRMMU versions
of the pmap functions.
2002-12-31 15:23:29 +00:00
83dae8a821
* map the PROM CPU mailbox if available.
...
* map MXCC error/status registers if available.
* add MXCC-specific module error interrupt handler.
* use high priority interrupt level in mp_pause_cpus()
2002-12-31 15:10:28 +00:00
2b59d26892
Add offset for `cpuinfo.ci_tt'.
2002-12-31 15:05:48 +00:00
c3bb05ff5b
* Add level argument to raise_ipi()
...
* Add diagnostic field members to cpu_info.
2002-12-31 15:04:49 +00:00
5c671fd10d
nmi_sun4m: run handler at splhigh()
2002-12-31 14:34:54 +00:00
43b86d0b59
rwindow debug code: display the current cpu number.
2002-12-31 13:17:23 +00:00
a1e9e5cae8
Add some more definitions: SRMMU and MXCC reset register.
2002-12-31 12:01:27 +00:00
122353da40
rename CPU_READY() to CPU_NOTREADY() seeing that's what it checks.
2002-12-28 02:35:56 +00:00
7d51aacb32
update the vme bus_space_tag_t to reality.
2002-12-28 01:33:00 +00:00
ffbcb6d927
Conditionalize T_DBPAUSE trap handling on #ifdef MULTIPROCESSOR to make
...
single CPU kernels compile again.
2002-12-26 12:14:31 +00:00
f8055a350c
* Use correct PC value for displaying the called function.
...
* Merge code to display non-kernel frames.
2002-12-23 13:21:10 +00:00
f953a01835
xcallintr() receive a `clockframe *' argument, not a `trapframe *'.
...
Setup a DDB context for paused CPUs by defining a soft trap (T_DBPAUSE)
which uses the generic trap handler code to get the trapframe constructed
and then calls on a debugger-defined `suspend' routine.
2002-12-23 00:55:16 +00:00
5c62f82bdf
Upon trap exit, update the trapframe with data for the running CPU rather
...
than the one which was the last target of the `machine cpu' command.
2002-12-23 00:42:37 +00:00
6ee482ef5b
change what 'hw.model' reports to be more inline with other netbsd ports, as
...
well as reporting the actual machine model & cpu, rather than first configured
CPU. changes for two machines are:
old:
hw.model = TMS390Z50 v0 or TMS390Z55 @ 75 MHz, on-chip FPU
hw.model = SUNW,UltraSPARC @ 143.002 MHz, version 0 FPU
new:
hw.model = SUNW,SPARCstation-20 (TMS390Z50 v0 or TMS390Z55 @ 75 MHz, on-chip FPU)
hw.model = SUNW,Ultra-1 (SUNW,UltraSPARC @ 143.002 MHz, version 0 FPU)
as per discussion on port-sparc & port-sparc64.
2002-12-22 02:17:24 +00:00
4a06119a9d
Pass the system call table to trace_enter() and ktrsys() so that it is
...
possible to use alternate system call tables. This is usefull for
displaying correctly the arguments in Mach binaries traces.
If NULL is given, then the regular systam call table for the process is used.
2002-12-21 16:23:56 +00:00
4e0634669b
* xcallintr(): use cpuinfo directly again.
...
* nmi_soft(): remove most of the obsoleted requests.
2002-12-21 12:55:54 +00:00
0408b1cbc8
tlb_flush_segment() and tlb_flush_region() now take a virtual address
...
argument instead of segment and region numbers.
2002-12-21 12:52:55 +00:00
82815de0ad
Use xcall() to broadcast MMU TLB flushes.
2002-12-21 12:13:38 +00:00
8dcde9f5b1
* cpu_hatch(): enable interrupts upon return from cpu_setup().
...
* interrupt trap: acquire the kernel lock only for interrupt levels <= PIL_SCHED
2002-12-21 11:57:41 +00:00
1d8dc4daf2
* getcacheinfo_obp(): also initialise the cacheinfo i/d associativity fields
...
in the case of a unified cache.
* xcall(): slightly optimise the `wait for other CPUs' loop.
2002-12-21 11:48:55 +00:00
f0a20f1305
* mark selected fields of `struct xpmsg' as volatile, instead of the whole
...
structure.
* change volatile => __volatile
2002-12-19 16:31:38 +00:00
2fba4e01ff
Mark CPUs that did not spin up properly and don't enable them later on.
2002-12-19 11:20:30 +00:00
75c5f270d2
Brush-up the generic cross-call routine and use it to implement the SMP
...
cache flush ops.
Also a standard soft interrupt handler for standard cross-call notification
reserving the NMI level 15 softint for urgent cross calls.
2002-12-19 10:38:28 +00:00
eaf530d598
Sprinkle volatiles to avoid register allocation, esp. in cross-call
...
synchronisation functions used in SMP kernels.
2002-12-19 10:30:39 +00:00
ec2b1c3c64
smp_cache_flush() also takes a context parameter.
2002-12-19 10:27:19 +00:00
2076dbdb04
Install the sparc V8 multiply/divide routines after we've collected some
...
basic information on the CPUs.
2002-12-18 11:56:43 +00:00
1a854929dd
we use nmi_hard and nmi_soft on SUN4D as well
2002-12-18 06:20:36 +00:00
a26cbfba69
Deal with an `unimplemented flush' trap from kernel mode.
2002-12-17 10:04:19 +00:00
c2ddc52f2d
The cache flush routines now take a CPU context parameter. This is going
...
to be necessary in SMP kernels.
2002-12-16 16:59:09 +00:00
b036b089a7
Multiple inclusion protection.
2002-12-16 16:24:40 +00:00
0a3a2262cb
Increment version number for match function and Cycle 5 IP changes.
2002-12-16 13:02:58 +00:00
079b83cafa
Extend the matching routine to take a function pointer, so that additional
...
(arbitrary) matching can be done.
Add match function and patch for Cycle 5 IP (Sparc 5 clone).
Reviewed by Uwe.
2002-12-16 13:01:01 +00:00
ae7d5baab6
Fix pasto - make it compile for !MULTIPROCESSOR
2002-12-15 23:01:09 +00:00
9313f9570d
Disable `unimplemented flush' traps during boot. Keep it disabled on
...
non-MULTIPROCESSOR kernels.
2002-12-15 15:01:08 +00:00
cc079cff49
release the kernel lock if trace_enter fails.
...
XXX[1]: We need to fix all platforms that do this.
XXX[2]: x86 does not check for MPSAFE syscalls before grabbing the lock.
2002-12-14 14:52:24 +00:00
f4fe3fda21
dumpsys(): Use pmap_kremove() to unmap pages mapped pmap_kenter().
2002-12-12 09:34:04 +00:00
047870f66e
softintr_establish(): append handler to the list for the actually choosen
...
processor interrupt level.
2002-12-11 13:21:19 +00:00
e675712f0d
* loadfile() return a file descriptor that must be closed.
...
* check the kernel size before loading
2002-12-11 10:35:06 +00:00
e8cc3884de
Rename __LDPGSZ to AOUT_LDPGSZ, to accurately reflect what it is.
2002-12-10 17:14:02 +00:00
725a6aebf7
Remove the `flags' argument from bus_intr_establish().
2002-12-10 13:44:47 +00:00
5446e96bac
bus_intr_establish() now takes an optional `fast trap' handler argument.
...
BUS_INTR_ESTABLISH_FASTTRAP and BUS_INTR_ESTABLISH_SOFTINTR are no longer used.
2002-12-10 12:16:25 +00:00
45c45fca81
intr_establish() signature change: pass NULL for the `fast trap' argument.
2002-12-10 12:13:24 +00:00
fe233fdc10
The `fast trap' handlers are now pssed as an optional argument to
...
bus_intr_establish(). Allow fall-back on a regular interrupt handler if
the interrupt level must be shared with another device.
2002-12-10 12:11:21 +00:00
4f62e0f7c8
* intr_establish() now takes an optional `fast trap' routine argument.
...
* also remove __P().
2002-12-10 12:04:51 +00:00
6f945ab887
Allow a `fast trap' handler installation to be undone if an interrupt level
...
must be shared. This requires drivers that request the installation of
a `fast trap' handler to supply a regular interrupt handler as well to fall
back on.
The `fast trap' routine (if present) is now passed as an additional
argument to intr_establish().
2002-12-10 12:03:08 +00:00
78ea2dd367
Use __LDPGSZ (which must be == USRTEXT) as the text address for a.out
...
executables, and eliminate the USRTEXT constant, which was only used
by the a.out exec code.
2002-12-10 05:14:24 +00:00
04e582df1b
setsoftint() is no longer used.
2002-12-09 16:13:58 +00:00
48a30a2e35
Soft interrupts use their own set of handlers lists.
2002-12-09 16:13:23 +00:00
c822c6bd84
Finish the switch to the softintr(9) framework.
...
To make this work, we now have to use separate handler lists for hardware
and software interrupts as the soft interrupt handlers do not return
an `interrupt handled' status.
Thanks to Matt Fredette for providing an initial set of patches on port-sparc.
2002-12-09 16:11:50 +00:00
74a8332ee9
cpu_switch(): avoid raising the interrupt level and enabling traps at the
...
same time as this may cause a spurious interrupt in some implementations.
Pointed out by uwe.
2002-12-08 16:16:59 +00:00
38b8c5689a
Use 0x07ffffff for LOADADDR mask. This still provides for 128MB (and
...
given that PROM maps just 4 or 16 this is not going to be a bottle
neck). Doesn't really affect normal kernels, need it for the changed
kernel base address (uncommitted) hack for broken javastation OFW.
Ok by pk.
2002-12-08 14:36:55 +00:00
6c8d3fba22
Use MI versions of {set,rem}runqueue().
2002-12-07 10:27:03 +00:00
9ebe0ee7a6
ienab_bi[cs] are never used in a context common to both sun4/4c and sun4m,
...
so there's no point in constructing common entry points for them in locore.s.
2002-12-06 17:45:39 +00:00
1b719337bb
Pass the `device class interrupt level' on to intr_establish() and use to
...
raise the ipl in the interrupt handlers to the appropriate level. This avoids
interrupt handler interference if one of the devices actually interrupts at
a lower hardware level than the maximum level assined to a device class.
Based on code from Art Grabowski in openbsd.
2002-12-06 16:04:11 +00:00
721e534a25
Use IPL_SOFTFDC.
2002-12-06 15:37:55 +00:00
e093913db8
Use IPL_SOFTAUDIO.
2002-12-06 15:37:39 +00:00
060fa93542
Start using IPL_* constants from intr.h; phase out PIL_* in psl.h
2002-12-06 15:36:45 +00:00
0fee3368c3
Fixed a null pointer passed to printf().
2002-12-05 18:05:33 +00:00
6c05e7879f
Fix an options<space><tab> nit.
2002-12-04 23:30:40 +00:00
23c0293ee7
The chip treats weekday 1 == Sunday, correct dt_wday adjustment logic
...
appropriately. NB: the old code would never write weekday zero that,
I've been told, might cause the RTC to reset.
Pointed out by kenh.
2002-12-03 17:54:54 +00:00
59c9274871
Always get the `mid' cpu property. Whine if it's not set on an actual
...
multi-processor machine.
2002-11-29 08:29:57 +00:00
03549142e0
Find the CPU architecture version early in the bootstrap phase, and switch
...
to the V8 specific .mul/.div/.rem routines while we still have a writable
.text section.
2002-11-29 08:02:05 +00:00
565cedc81e
Provide the V8 mul/div routines for SUN4D as well.
2002-11-29 07:56:50 +00:00
6564749632
Move the installation of v8 specific .mul/.div functions into a separate
...
routine to be called when we're sure the CPU is actually sparc version 8.
2002-11-28 15:32:15 +00:00
8d141cba88
Not all sun4m platforms have version 8 sparc CPUs. So go out to the PROM
...
and get the CPU architecture version from the PROM cpu node `sparc-version'
property.
2002-11-28 15:29:53 +00:00
f19c04e3ed
Move timer{match,attach}_mainbus() back into timer.c, since the `timer at
...
mainbus' configuration declaration is orthogonal to the configured SUN4[CM]
platform options.
2002-11-28 14:18:31 +00:00
ba4983b5db
Provide sparc v8 multiply/divide routines which are copied over the base
...
v7 versions on sun4m and sun4d machines. Based on Chris Torek's BSD/OS
code.
2002-11-27 16:08:34 +00:00
0635de35a3
Remove KDIR=, since SYS_INCLUDE=symlinks and KDIR are not supported any more.
2002-11-26 23:30:07 +00:00
729ccbc9cd
si_ -> sel_
2002-11-26 19:49:00 +00:00
09dfaace39
The traditional C preprocessor is fixed in GCC 3.3 now, so no need
...
to skip -traditional-cpp for HAVE_GCC3.
2002-11-26 18:51:12 +00:00
007c037980
* pmap_destroy(): reset the region gap
...
* pmap_quiet_check(): add check for pmeg leaks on sun4/4c (this is DEBUG only).
2002-11-26 15:09:56 +00:00
0fad562c7c
The presence of the `timer at obio' attachment is independent of the
...
various CPU support settings.
2002-11-26 14:43:39 +00:00
ec667a0f51
Add `machdep.cpu_arch' sysctl to determine the CPU architecture version.
...
Currrently, cpu types `sun4' and `sun4c' produce version 7, all others
version 8.
2002-11-26 14:36:10 +00:00
070e18f3f3
Assign a major number for "lpt* at ebus?".
2002-11-24 20:58:06 +00:00
e78e668887
Fix typo (responsiness -> responsiveness).
2002-11-22 12:20:58 +00:00
d584ed9598
Add a realcode argument to trace_enter and ktrsyscall. realcode is the
...
original system call number, which can be negative for a Mach trap.
We cannot just replace code by realcode, because ktrsyscall uses it as
an index in the system call table, thus crashing the kernel when the
value is negative.
2002-11-15 20:06:00 +00:00
7e95293c56
Use BOOT_FLAG() macro to process flags.
2002-11-09 01:35:54 +00:00
7a7c188182
Oh, COPTS in config overrides optimizations again.
2002-11-08 22:51:53 +00:00
603098b9b5
implement separate read/write disk statistics:
...
- disk_unbusy() gets a new parameter to tell the IO direction.
- struct disk_sysctl gets 4 new members for read/write bytes/transfers.
when processing hw.diskstats, add the read&write bytes/transfers for
the old combined stats to attempt to keep backwards compatibility.
unfortunately, due to multiple bugs, this will cause new kernels and old
vmstat/iostat/systat programs to fail. however, the next time this is
change it will not fail again.
this is just the kernel portion.
2002-11-01 11:31:50 +00:00
71614764a4
Compile with an ISO C preprocessor.
2002-10-30 01:46:09 +00:00
f921b6a46c
make this compile with DEBUG (name changes missed in rev. 1.172).
2002-10-27 18:39:17 +00:00
c82ab2eb79
now that mem_no is emitted by config(8), there is no reason to keep
...
copy of more or less identical iskmemdev() for every arch; move the function
to spec_vnop.c, and g/c machine-dependant copies
2002-10-26 13:50:17 +00:00
e0cc03a09b
merge kqueue branch into -current
...
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
2002-10-23 09:10:23 +00:00
af2a75546d
Clean-up kbd driver layers a bit more. Lift common code into the upper layer.
...
Add some wskbd TODO remarks (hi, martin).
2002-10-21 15:36:35 +00:00
35ec23469c
Correct zstty interface attribute (cf files.sparc64 1.69).
...
Comment out unused kbd_tty and ms_tty attachments.
2002-10-21 15:25:42 +00:00
f19a67c55f
Allow hyphen in kernel names. Bump version.
...
Should fix PR 13429 and PR 18691.
2002-10-20 20:55:38 +00:00
e4b7588c28
Add NEW_BUFQ_STRATEGY (disabled by default).
2002-10-18 15:11:08 +00:00
9b3cdc3ab5
Make 32bit sparc64 kernels with DEBUG and DIAGNOSTIC compile.
2002-10-16 11:05:10 +00:00
86fda61426
Uncomment audioamd0 at obio0.
2002-10-15 13:53:01 +00:00
d1f466e658
Add audioamd at obio attachment. Now we have working audio on 4/600's :
...
audioamd0 at obio0 slot 0 offset 0x500000 level 13 softpri 4
audio0 at audioamd0: full duplex
2002-10-15 13:49:52 +00:00
5ab71e20b0
Added commented out cgd(4)s to GENERIC configs.
2002-10-14 18:39:22 +00:00
900b200c92
Moved MI APM definitions into dev/apm.
2002-10-14 02:08:37 +00:00
050645f10a
Check only the physical address of serial ports on a Sun 4.
...
Reviewed by Uwe.
2002-10-09 08:56:25 +00:00
a931c80c22
G/c unnecessary includes.
2002-10-08 18:00:46 +00:00
44a2c6cb31
All sparc64 CPUs do __HAVE_CPU_COUNTER (aka %tick).
2002-10-07 13:26:56 +00:00
2f7a0aaac8
add SYSTRACE; approved perry.
2002-10-06 02:11:54 +00:00
d19d268a95
assign majors for raw and cooked cgd's.
2002-10-04 18:28:24 +00:00
fbcf88f171
Add wscons. Misc catch-up with GENERIC.
2002-10-03 17:45:20 +00:00
fa76f154c6
Add majors for wscons devices.
...
And, no! This does not mean that sparc switches to wscons.
Only Krups has experimental wscons support so far.
2002-10-03 17:06:18 +00:00
7235b5d479
First cut at PS/2 keyboard and mouse drivers that talk Sun firm events.
...
Console and Xsun for Mr.Coffee.
2002-10-03 16:27:04 +00:00
fb2195ae8f
Search children of the "8042" node to check if keyboard is the stdin.
2002-10-03 16:22:46 +00:00
191626f788
Refactor kbd and mouse drivers so that they can use different middle
...
layers. Common middle layer shared by kbd_zs and sunkbd is moved into
the new file. Move shared config directives to files.sun and adjust
ports' files.* accordingly.
Need this to support console/Xsun on Mr.Coffee JavaStation.
Tested on sparc, sparc64 (by martin) and sun3 (by jdc).
2002-10-03 16:13:24 +00:00
4bf871a755
Add trailing ; to CFATTACH_DECL.
2002-10-02 16:02:08 +00:00
c1077f220d
Use CFATTACH_DECL().
2002-10-01 18:57:48 +00:00
b1c7ac0e6d
"definitions" has lots of 'i's, but that's not reason to leave one out.
2002-09-29 23:23:56 +00:00
f818766afe
Declare all cfattach structures const.
2002-09-27 20:31:45 +00:00
0f09ed48a5
remove trailing \n in panic(). approved perry.
2002-09-27 15:35:29 +00:00
6c88de3b53
Introduce a new routine, config_match(), which invokes the
...
cfattach->ca_match function in behalf of the caller. Use it
rather than invoking cfattach->ca_match directly.
2002-09-27 03:17:40 +00:00
d1ad2ac4f2
Rather than referencing the cfdriver directly in the cfdata entries,
...
instead use a string naming the driver. The cfdriver is then looked
up in a list which is built at run-time.
2002-09-27 02:24:06 +00:00
274c086b22
Remove <sys/map.h>
2002-09-26 18:54:30 +00:00
71404bb533
Don't include <sys/map.h>.
2002-09-25 22:21:01 +00:00
81e8d78cd4
Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"
2002-09-25 11:49:48 +00:00
787cbc6921
Fix some const warnings.
2002-09-24 18:14:35 +00:00
63096043b3
Use "#define\t" instead of "#define ".
2002-09-22 08:30:56 +00:00
c081614ea2
it really helps to get the stub right before cutting + pasting it 27 times.
...
alas, I did not. doh.
2002-09-22 07:53:39 +00:00
55e1f79335
add pmap_remove_all() hook (empty on most platforms so far).
2002-09-22 07:17:08 +00:00
dca80f08fd
Add __HAVE_MD_RUNQUEUE flag for MD code to override MI run queue primitives.
2002-09-22 04:11:32 +00:00
3b553bac54
Added (commented out) IPFILTER_DEFAULT_BLOCK.
2002-09-20 10:39:48 +00:00
b3abfee038
Do not include <sys/clist.h>, it's not used in NetBSD at all.
2002-09-19 10:37:59 +00:00
3ea2e21f82
enable USERCONF by default; it's small and extremely useful to have available.
2002-09-18 02:43:53 +00:00
917eac2212
RCSID should go to .ident section.
...
While here add __KERNEL_RCSID.
2002-09-17 15:28:28 +00:00
ca0ac2c78c
Driver for the Sun ZX/Leo framebuffer. This would be called leo, but the
...
amiga port already has a driver by that name.
2002-09-13 14:03:52 +00:00
be0f4cfb13
Rename some auto variables which might cause misleadings.
2002-09-08 05:35:42 +00:00
bf49a76d3b
Call setcontext{4,4m}() directly when we already know the CPU type.
...
(inspired by OpenBSD)
2002-09-07 18:51:05 +00:00
77a6b82b27
Merge the gehenna-devsw branch into the trunk.
...
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
2002-09-06 13:18:43 +00:00
c9dafdb84c
Increase the default stack limit to 2M (from 512K on sparc and 1M
...
on sparc64).
2002-09-03 16:24:35 +00:00
d1523404bb
Fix missing error check in sparc_bus_map(). Pointed out by uwe.
2002-08-30 20:38:31 +00:00
082c4cf032
Make sun ports use common keyboard/firm events related includes
...
from dev/sun.
2002-08-27 09:47:41 +00:00
139cdc3125
Make nbuf, nswbuf, and bufpages unsigned. Make all operations on these
...
variables unsigned, and update places where their values are printed.
2002-08-25 20:21:33 +00:00
a9f285b0ac
Put a bus's ranges in the bus space tag, and make sparc_bus_map()
...
perform the translation and recursion if t->ranges != NULL. Make
sbus, cpuunit, and bootbus inherit the parent's map/mmap routines,
and delete the now-unused mapping functions. Update all places where
bus space tags are statically allocated.
2002-08-25 17:54:57 +00:00
067a64da4d
Split the timer code up into Sun4/Sun4c, Sun4m, and MS-IIep bits, mostly
...
to make it more readable.
2002-08-25 16:10:35 +00:00
0570742a0b
Add a generic function to translate a device address using a
...
parent's "ranges" property, and use it.
2002-08-25 16:05:41 +00:00
51b546d0bb
Move the DMA tag and DVMA map into the iommu_softc, and pass the
...
iommu_softc in the DMA tag cookie. This gives us a chance of supporting
systems (such as the Sun4d) which have multiple iommus.
2002-08-25 16:02:53 +00:00
d476292c05
Add Sun4d cpu-unit ASIs.
2002-08-24 17:27:21 +00:00
41c25cb648
Add autoconfiguration support for the Sun4d "bootbus". Add a
...
zs @ bootbus attachment.
2002-08-24 05:26:56 +00:00
bb0558df3e
Oops, don't need a DMA tag.
2002-08-23 21:49:13 +00:00
a71473b576
Add autoconfiguration glue for the Sun4d "cpu-unit". Each processor
...
board has 2 CPU units (one for each processor), one of which also has
a "bootbus", to which the serial ports, etc. are attached.
We can now probe/attach CPUs on a SPARCserver 1000.
2002-08-23 18:00:46 +00:00
90817e313c
Use the structures defined in bsd_openprom.h for "reg", "range",
...
and "intr" properties, rather than having identical-except-for-names
sbus_* and iommu_* versions.
2002-08-23 02:53:10 +00:00
de6a644cea
* Refine the comment describing openprom_addr.
...
* Add openprom_range and openprom_intr structures.
2002-08-23 01:08:45 +00:00
fdc57c1775
Add missing slash to /* notyet *
2002-08-17 02:23:18 +00:00
e7bdddc025
Fix botch in previous. #ifdef DIAGNOSTIC was one instructions too early
...
in sparc_interrupt4m, thus breaking soft interrupts for normal 4m's.
Should fix port-sparc/17891 (thanks, Martin).
2002-08-14 14:45:37 +00:00
1031f6caa4
Fix cacheinfo.c_nlines for sun4 and sun4c machines.
...
(they are not used anyway..)
2002-08-09 14:46:04 +00:00
0b956d0b8b
Implement pmc(9) -- An interface to hardware performance monitoring
...
counters. These counters do not exist on all CPUs, but where they
do exist, can be used for counting events such as dcache misses that
would otherwise be difficult or impossible to instrument by code
inspection or hardware simulation.
pmc(9) is meant to be a general interface. Initially, the Intel XScale
counters are the only ones supported.
2002-08-07 05:14:47 +00:00
80fb19da39
Convert to new device buffer queue interface.
...
Approved by: Paul Kranenburg <pk@netbsd.org>
2002-08-06 14:44:15 +00:00
5b89d2589b
In DIAGNOSTIC kernels detect situation that on sun4m neither hardware
...
nor software interrupt pending bit is set for the current ipl. Report
this as a "bogus" interrupt (better name anyone?). This is a symptom
of a bug in interrupt handling in one of device drivers interrupting
at this ipl. Reviewed by pk.
2002-08-04 14:57:34 +00:00
8dd04cdcd7
correct range check, have overflow check, fix type mismatches,
...
for cmap args and some other calls. from openbsd
2002-08-03 00:12:48 +00:00
3a0d60972a
bump offset by RF_PROTECTED_SECTORS if FS_RAID
2002-07-29 14:34:12 +00:00
b26eca1528
"DVMA coherent" -> ": DVMA coherent"
...
noted by Matt Thomas on icb.
2002-07-29 06:39:41 +00:00
8543c0c2bc
make sparc64 friendly.
2002-07-20 11:43:43 +00:00
44a3eec3a0
sync these with the sparc64 versions.
2002-07-20 08:37:30 +00:00
3912e469dd
Rename cdev_systrace_init() to cdev_clonemisc_init(), so it can
...
be properly used by any misc. cloning device. While here, correct
a comment to indicate that "open" is the only entry point and that
everything else is handled with fileops.
2002-07-19 16:38:14 +00:00
0c9b77712e
Add Sun4d "special nodes".
2002-07-18 03:22:00 +00:00
417877e5d7
Add checks for Sun4d. Use CPU_HAS_SRMMU as appropriate.
2002-07-18 02:32:35 +00:00
8d23955168
Add sun4d cases for early bootstrap. This is good enough to
...
get as far as printing the copyright on an SPARCserver 1000.
2002-07-17 16:59:09 +00:00
b122660639
More sun4m/sun4d common stuff.
2002-07-17 15:57:12 +00:00
45af102cdd
More cache/cpu stuff common to sun4m and sun4d. Note the sun4d
...
machines always use the Viking CPU, and cache info is not available
from the PROM, so we have to hard-code it in that case.
Rearrange some stuff to make it easier to share.
2002-07-17 15:56:20 +00:00
d7722ad8a6
Remove an unnecessary "if defined(SUN4M)"
2002-07-17 15:53:21 +00:00
11a856f8a6
Add SUN4D ifdef cases. Use CPU_HAS_SRMMU where appropriate.
2002-07-17 14:31:46 +00:00
d681f8b1d4
Add a macro to test if the system uses the SRMMU (Sun4M || Sun4D).
2002-07-17 06:19:45 +00:00
7d6525e9b6
Handle the CPU_NTYPES == 0 case (as we would see in bootblocks)
...
in the CPU types predicates.
2002-07-17 06:17:20 +00:00
477ba79eb9
Add a CPU_ISSUN4D predicate.
2002-07-17 06:07:29 +00:00
be0b3b8b70
Instead of using a matrix of configured CPU types, first count
...
how many CPU types are configured into the kernel. Then, use this
information to define the CPU predicate macros according to the
following rules:
1. If support for a CPU type is not configured into the kernel,
then the test is always false.
2. Otherwise, if only one CPU type is configured into the kernel,
then the test is always true.
3. Otherwise, we have to reference the cputyp variable.
Use a similar strategy for short-cutting the page size related
definitions.
2002-07-17 05:57:47 +00:00
36fb7ee740
Remote CPU_ISSUN4OR4C and CPU_ISSUN4COR4M, and instead express them
...
as (CPU_ISSUN4 || CPU_ISSUN4C) and (CPU_ISSUN4C || CPU_ISSUN4M),
respectively. The compiler can still optimize as desired by expressing
them this way, and it simplifies adding new tests.
While here, just remove CPU_ISSUN4MOR4U; it's not used by anything.
2002-07-17 04:55:56 +00:00
aa54c756ac
Print out a meaningful message on the sun4d if the kernel does
...
not support the sun4d, like we do with sun4c and sun4m.
2002-07-17 02:57:14 +00:00
acf4b72be5
Add CPU_SUN4D.
2002-07-17 02:43:43 +00:00
5fd1700062
Add SUN4D to the list of arch's in opt_sparc_arch.h.
2002-07-17 02:23:15 +00:00
c2a0c6fe7c
Add a missing ":" when printing the delay constant message.
2002-07-14 19:42:58 +00:00
eb73becae2
Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
...
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.
2002-07-05 13:40:10 +00:00
011d4d5f44
Add kernel support for having userland provide the signal trampoline:
...
* struct sigacts gets a new sigact_sigdesc structure, which has the
sigaction and the trampoline/version. Version 0 means "legacy kernel
provided trampoline". Other versions are coordinated with machine-
dependent code in libc.
* sigaction1() grows two more arguments -- the trampoline pointer and
the trampoline version.
* A new __sigaction_sigtramp() system call is provided to register a
trampoline along with a signal handler.
* The handler is no longer passed to sensig() functions. Instead,
sendsig() looks up the handler by peeking in the sigacts for the
process getting the signal (since it has to look in there for the
trampoline anyway).
* Native sendsig() functions now select the appropriate trampoline and
its arguments based on the trampoline version in the sigacts.
Changes to libc to use the new facility will be checked in later. Kernel
version not bumped; we will ride the 1.6C bump made recently.
2002-07-04 23:32:02 +00:00
61a86a83fe
add a couple more dependencies so that we can build a kernel without
...
make depend.
2002-07-01 16:37:08 +00:00
cc3f5791ea
Comments update: indicate which counters are being incremented.
2002-06-24 09:26:47 +00:00
0e8ea4f752
`fdcio_intrcnt.ev_count' is a 64-bit variable.
2002-06-24 09:24:37 +00:00
f427b80c27
Add ENTRY_NOPROFILE().
2002-06-24 01:13:34 +00:00
e78903dcee
add "SUNW,hme" as an an alias for "hme".
...
my ss5 that netboots off an sbus swift card now autodetects the root device.
2002-06-21 14:38:36 +00:00
c5ccbb71e5
remove syscall debugging code; thanks eduardo for fixing the code! looks
...
much nicer now.
2002-06-20 00:55:39 +00:00
254fefb729
Fix a typo introduced in the last commit.
2002-06-19 10:13:43 +00:00
3b50728cf4
MD systrace gluons.
2002-06-17 16:32:57 +00:00
fde6ae6f04
Enable "pseudo-device clockctl" in all kernels, except
...
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"
2002-06-17 05:14:02 +00:00
a47cb57561
Fix for 64-bit event counters. Fixes PR17207.
2002-06-13 21:04:37 +00:00
6c672d0196
Make this work with AUDIO_C_HANDLER.
2002-06-13 21:02:45 +00:00
471fad1d4c
Hasn't been used for years.
2002-06-13 20:57:03 +00:00
bfc1e3973f
Dynamically allocate the buffer we use for filesystem deblocking based on
...
the filesystem blocksize in the super block. Allows us to read filesystems
with block sizes > 8KB.
2002-06-12 22:18:02 +00:00
222181a0e0
Fix typo in nmi_sun{4,4c}, use correct register.
2002-06-11 11:37:01 +00:00
49444f80fe
Fill delay slot in previous to match normal microtime.
2002-06-10 01:58:52 +00:00
45f993a079
Do not use "std" in ms-IIep micortime, the argument is not guaranteed
...
to be double-word aligned and it is not when we are called from bpf.
Remove "should be able to std here" comment in generic microtime.
While here, simplify some asm mnemonics and fix a typo in comment.
2002-06-09 20:02:41 +00:00
07cafe307b
Follow changes in libsa/stand.h: exit(void) -> exit(int) (one in a #if
...
0 block), to make it compile again.
2002-06-06 05:04:28 +00:00
cbb23a42ca
Fix phys->pci memory pass-through mapping.
...
While here, correct wording in a comment.
2002-06-05 00:23:01 +00:00
d941ddfee0
Don't use -traditional-cpp if HAVE_GCC3.
2002-06-04 21:39:09 +00:00
d2b9876081
move initialization of the "struct pglist" returned by uvm_pglistalloc()
...
from the calling code into uvm_pglistalloc() itself for consistency
and easier error handling
2002-06-02 14:44:35 +00:00
9e383c402e
Use C-style comments in a few places where ' appears in the comment,
...
so that this works with GCC 2.95.3's ISO C preprocessor.
2002-05-31 19:59:00 +00:00
969c677abf
Remove redundant (and incorrect) extern decl.
2002-05-31 19:49:42 +00:00
07db2878a8
Use ${FGEN} rather than fgen.
2002-05-28 21:56:54 +00:00
1d33ded1ea
Fix stupid typo in pci_decompose_tag().
2002-05-16 01:33:53 +00:00
204183c0fa
* Add "pcitag_t *pba_bridgetag" to pci_attach_args. This is set to
...
NULL for root PCI busses. For busses behind a bridge, it points to
a persistent copy of the bridge's pcitag_t. This can be very useful
for machine-dependent PCI bus enumeration code.
* Implement a machine-dependent pci_enumerate_bus() for sparc64 which
uses OFW device nodes to enumerate the bus. When a PCI bus that is
behind a bridge is attached, pci_attach_hook() allocates a new PCI
chipset tag for the new bus and sets it's "curnode" to the OFW node
of the bridge. This is used as a starting point when enumerating
that bus. Root busses get the OFW node of the host bridge (psycho).
* Garbage-collect "ofpci" and "ofppb" from the sparc64 port.
2002-05-16 01:01:28 +00:00
dada8613e1
Let machine-dependent code specify how to enumerate the bus.
...
Currently, everyone uses pci_enumerate_bus_generic().
2002-05-15 19:23:51 +00:00
11fa11094e
Garbage-collect __PCI_DEV_FUNCORDER.
2002-05-15 18:37:54 +00:00
966b42a3e6
bootblock.h:
...
- unify sparc_bbinfo (1064 bytes, with 256 block entries)
and sun68k_bbinfo (296 byte, with 64 block entries)
into shared_bbinfo (512 bytes, with 118 block entries),
which will be also shared by future bbinfo-using platforms
(including macppc)
- add datestamp to *_BBINFO_MAGIC strings, to prevent installboot vs
bootxx version skew.
- add macppc support
*/bootxx.c:
- migrate to new shared_bbinfo structure
installboot:
- add macppc support (still needs applepartmap support and testing)
- improve and add some more warnings & errors to installboot
- implement shared_bbinfo_clearboot() and shared_bbinfo_setboot(), which
perform the majority of the work for bbinfo-using back-ends
(rather than replicating that across multiple back-ends).
2002-05-15 09:44:54 +00:00
aaa7dba035
- Enable NFS_BOOT_DHCP (as well as the existing NFS_BOOT_BOOTPARAM).
...
DHCP/Bootp is tried before bootparams in the MI nfs mountroot code.
- Change the order in boot.net from "bootparams then bootp" to
"bootp then bootparams", to be consistent with the MI nfs mountroot code.
(Consistency with other NetBSD ports is good, and things still work
for sites that run bootparams but not dhcp/bootp, although I'd argue that
dhcp/bootp is much easier to setup and manage and is easier to debug
than our rpc.bootparamd...)
Per discussion with Paul Kranenburg and Matt Green.
2002-05-14 14:27:33 +00:00
0a6d35b7ed
Nuke local extern label_t *db_recover; it's now in <ddb/db_extern.h>
2002-05-13 20:30:07 +00:00
afd360002d
Oops, mspcic_bus_mmap was, effectively, adding offset twice.
...
While here, add __KERNEL_RCSID.
2002-05-08 16:51:39 +00:00
eb95178e15
Patch up to work with MI installboot(8).
2002-05-07 14:13:02 +00:00
37d1d9cf41
decommission old installboot; it doesn't work on bootxx anymore anyway.
2002-05-07 12:32:52 +00:00
cea307e47c
convert to <sys/bootblock.h>
2002-05-07 12:06:06 +00:00
db2a20d3fc
Convert `bootxx' to raw binary format which is what the MI installboot(8)
...
program needs.
2002-05-07 11:32:44 +00:00
440409e641
Delint a bit.
2002-05-07 06:45:22 +00:00
2baa6f8e86
Drop SUN4_PGSHIFT and SUN4CM_PGSHIFT. They are already known to .S
...
files from sys/param.h. The problem is that lint stubs are generated
with -C (keep comments) and gcc complains about macro redefinition,
since "assym.h" doesn't have the comments that "sys/param.h" has.
2002-05-07 02:38:44 +00:00
8107633e20
bus space methods should be "static __inline__", not "extern __inline__".
...
Otherwise an unoptimized kernel cannot be linked. Reviewed by pk.
2002-05-07 00:37:47 +00:00
73843c4a73
Comment change only. Update the version of GENERIC this config is
...
synced with.
2002-05-06 02:04:14 +00:00
da9accb616
Don't define _LP64 here.
2002-05-03 18:27:41 +00:00
9b693d4bca
Remove a local declaration shadowing the global "int statint", thus
...
preventing the latter to be initialized properly.
Patch from adam@lebsack.com in PR 16608.
2002-05-02 13:01:45 +00:00
d1b3852365
Add the INCLUDE_CONFIG_FILE option to all config files. In config
...
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.
2002-04-25 15:06:20 +00:00
ebe575d3ca
BUS_ADDR(): avoid signed conversions.
2002-04-23 07:17:29 +00:00
7f7ab48604
Rename the audio "bus" attribute audiobus to avoid confusion with audio
...
device.
2002-04-22 09:41:19 +00:00
eedd94475c
* Move the mii_bitbang attribute into dev/mii/files.mii
...
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.
2002-04-16 20:50:16 +00:00
4a0ee23b99
Set COM_HW_NO_TXPRELOAD.
2002-04-12 19:34:24 +00:00
6e066ba77a
Add commented-out USERCONF option. Mainly useful for install media
...
and can be optionally enabled based on miniroot and ramdisk size
requirements.
2002-04-12 08:10:45 +00:00
pk